drivers/net/wan/sealevel.c

   1 /*
   2  *      Sealevel Systems 4021 driver.
   3  *
   4  *      This program is free software; you can redistribute it and/or
   5  *      modify it under the terms of the GNU General Public License
   6  *      as published by the Free Software Foundation; either version
   7  *      2 of the License, or (at your option) any later version.
   8  *
   9  *      (c) Copyright 1999, 2001 Alan Cox
  10  *      (c) Copyright 2001 Red Hat Inc.
  11  *
  12  */
  13
  14 #include <linux/module.h>
  15 #include <linux/kernel.h>
  16 #include <linux/mm.h>
  17 #include <linux/net.h>
  18 #include <linux/skbuff.h>
  19 #include <linux/netdevice.h>
  20 #include <linux/if_arp.h>
  21 #include <linux/delay.h>
  22 #include <linux/ioport.h>
  23 #include <linux/init.h>
  24 #include <net/arp.h>
  25
  26 #include <asm/irq.h>
  27 #include <asm/io.h>
  28 #include <asm/dma.h>
  29 #include <asm/byteorder.h>
  30 #include <net/syncppp.h>
  31 #include "z85230.h"
  32
  33
  34 struct slvl_device
  35 {
  36         void *if_ptr;   /* General purpose pointer (used by SPPP) */
  37         struct z8530_channel *chan;
  38         struct ppp_device pppdev;
  39         int channel;
  40 };
  41
  42
  43 struct slvl_board
  44 {
  45         struct slvl_device *dev[2];
  46         struct z8530_dev board;
  47         int iobase;
  48 };
  49
  50 /*
  51  *      Network driver support routines
  52  */
  53
  54 /*
  55  *      Frame receive. Simple for our card as we do sync ppp and there
  56  *      is no funny garbage involved
  57  */
  58
  59 static void sealevel_input(struct z8530_channel *c, struct sk_buff *skb)
  60 {
  61         /* Drop the CRC - it's not a good idea to try and negotiate it ;) */
  62         skb_trim(skb, skb->len-2);
  63         skb->protocol=htons(ETH_P_WAN_PPP);
  64         skb->mac.raw=skb->data;
  65         skb->dev=c->netdevice;
  66         /*
  67          *      Send it to the PPP layer. We don't have time to process
  68          *      it right now.
  69          */
  70         netif_rx(skb);
  71         c->netdevice->last_rx = jiffies;
  72 }
  73
  74 /*
  75  *      We've been placed in the UP state
  76  */
  77
  78 static int sealevel_open(struct net_device *d)
  79 {
  80         struct slvl_device *slvl=d->priv;
  81         int err = -1;
  82         int unit = slvl->channel;
  83
  84         /*
  85          *      Link layer up.
  86          */
  87
  88         switch(unit)
  89         {
  90                 case 0:
  91                         err=z8530_sync_dma_open(d, slvl->chan);
  92                         break;
  93                 case 1:
  94                         err=z8530_sync_open(d, slvl->chan);
  95                         break;
  96         }
  97
  98         if(err)
  99                 return err;
 100         /*
 101          *      Begin PPP
 102          */
 103         err=sppp_open(d);
 104         if(err)
 105         {
 106                 switch(unit)
 107                 {
 108                         case 0:
 109                                 z8530_sync_dma_close(d, slvl->chan);
 110                                 break;
 111                         case 1:
 112                                 z8530_sync_close(d, slvl->chan);
 113                                 break;
 114                 }
 115                 return err;
 116         }
 117
 118         slvl->chan->rx_function=sealevel_input;
 119
 120         /*
 121          *      Go go go
 122          */
 123         netif_start_queue(d);
 124         return 0;
 125 }
 126
 127 static int sealevel_close(struct net_device *d)
 128 {
 129         struct slvl_device *slvl=d->priv;
 130         int unit = slvl->channel;
 131
 132         /*
 133          *      Discard new frames
 134          */
 135
 136         slvl->chan->rx_function=z8530_null_rx;
 137
 138         /*
 139          *      PPP off
 140          */
 141         sppp_close(d);
 142         /*
 143          *      Link layer down
 144          */
 145
 146         netif_stop_queue(d);
 147
 148         switch(unit)
 149         {
 150                 case 0:
 151                         z8530_sync_dma_close(d, slvl->chan);
 152                         break;
 153                 case 1:
 154                         z8530_sync_close(d, slvl->chan);
 155                         break;
 156         }
 157         return 0;
 158 }
 159
 160 static int sealevel_ioctl(struct net_device *d, struct ifreq *ifr, int cmd)
 161 {
 162         /* struct slvl_device *slvl=d->priv;
 163            z8530_ioctl(d,&slvl->sync.chanA,ifr,cmd) */
 164         return sppp_do_ioctl(d, ifr,cmd);
 165 }
 166
 167 static struct net_device_stats *sealevel_get_stats(struct net_device *d)
 168 {
 169         struct slvl_device *slvl=d->priv;
 170         if(slvl)
 171                 return z8530_get_stats(slvl->chan);
 172         else
 173                 return NULL;
 174 }
 175
 176 /*
 177  *      Passed PPP frames, fire them downwind.
 178  */
 179
 180 static int sealevel_queue_xmit(struct sk_buff *skb, struct net_device *d)
 181 {
 182         struct slvl_device *slvl=d->priv;
 183         return z8530_queue_xmit(slvl->chan, skb);
 184 }
 185
 186 static int sealevel_neigh_setup(struct neighbour *n)
 187 {
 188         if (n->nud_state == NUD_NONE) {
 189                 n->ops = &arp_broken_ops;
 190                 n->output = n->ops->output;
 191         }
 192         return 0;
 193 }
 194
 195 static int sealevel_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p)
 196 {
 197         if (p->tbl->family == AF_INET) {
 198                 p->neigh_setup = sealevel_neigh_setup;
 199                 p->ucast_probes = 0;
 200                 p->mcast_probes = 0;
 201         }
 202         return 0;
 203 }
 204
 205 static int sealevel_attach(struct net_device *dev)
 206 {
 207         struct slvl_device *sv = dev->priv;
 208         sppp_attach(&sv->pppdev);
 209         return 0;
 210 }
 211
 212 static void sealevel_detach(struct net_device *dev)
 213 {
 214         sppp_detach(dev);
 215 }
 216
 217 static void slvl_setup(struct net_device *d)
 218 {
 219         d->open = sealevel_open;
 220         d->stop = sealevel_close;
 221         d->init = sealevel_attach;
 222         d->uninit = sealevel_detach;
 223         d->hard_start_xmit = sealevel_queue_xmit;
 224         d->get_stats = sealevel_get_stats;
 225         d->set_multicast_list = NULL;
 226         d->do_ioctl = sealevel_ioctl;
 227         d->neigh_setup = sealevel_neigh_setup_dev;
 228         d->set_mac_address = NULL;
 229
 230 }
 231
 232 static inline struct slvl_device *slvl_alloc(int iobase, int irq)
 233 {
 234         struct net_device *d;
 235         struct slvl_device *sv;
 236
 237         d = alloc_netdev(sizeof(struct slvl_device), "hdlc%d",
 238                          slvl_setup);
 239
 240         if (!d)
 241                 return NULL;
 242
 243         sv = d->priv;
 244         sv->if_ptr = &sv->pppdev;
 245         sv->pppdev.dev = d;
 246         d->base_addr = iobase;
 247         d->irq = irq;
 248
 249         return sv;
 250 }
 251
 252
 253 /*
 254  *      Allocate and setup Sealevel board.
 255  */
 256
 257 static __init struct slvl_board *slvl_init(int iobase, int irq,
 258                                            int txdma, int rxdma, int slow)
 259 {
 260         struct z8530_dev *dev;
 261         struct slvl_board *b;
 262
 263         /*
 264          *      Get the needed I/O space
 265          */
 266
 267         if(!request_region(iobase, 8, "Sealevel 4021"))
 268         {
 269                 printk(KERN_WARNING "sealevel: I/O 0x%X already in use.\n", iobase);
 270                 return NULL;
 271         }
 272
 273         b = kmalloc(sizeof(struct slvl_board), GFP_KERNEL);
 274         if(!b)
 275                 goto fail3;
 276
 277         memset(b, 0, sizeof(*b));
 278         if (!(b->dev[0]= slvl_alloc(iobase, irq)))
 279                 goto fail2;
 280
 281         b->dev[0]->chan = &b->board.chanA;
 282         b->dev[0]->channel = 0;
 283
 284         if (!(b->dev[1] = slvl_alloc(iobase, irq)))
 285                 goto fail1_0;
 286
 287         b->dev[1]->chan = &b->board.chanB;
 288         b->dev[1]->channel = 1;
 289
 290         dev = &b->board;
 291
 292         /*
 293          *      Stuff in the I/O addressing
 294          */
 295
 296         dev->active = 0;
 297
 298         b->iobase = iobase;
 299
 300         /*
 301          *      Select 8530 delays for the old board
 302          */
 303
 304         if(slow)
 305                 iobase |= Z8530_PORT_SLEEP;
 306
 307         dev->chanA.ctrlio=iobase+1;
 308         dev->chanA.dataio=iobase;
 309         dev->chanB.ctrlio=iobase+3;
 310         dev->chanB.dataio=iobase+2;
 311
 312         dev->chanA.irqs=&z8530_nop;
 313         dev->chanB.irqs=&z8530_nop;
 314
 315         /*
 316          *      Assert DTR enable DMA
 317          */
 318
 319         outb(3|(1<<7), b->iobase+4);
 320
 321
 322         /* We want a fast IRQ for this device. Actually we'd like an even faster
 323            IRQ ;) - This is one driver RtLinux is made for */
 324
 325         if(request_irq(irq, &z8530_interrupt, IRQF_DISABLED, "SeaLevel", dev)<0)
 326         {
 327                 printk(KERN_WARNING "sealevel: IRQ %d already in use.\n", irq);
 328                 goto fail1_1;
 329         }
 330
 331         dev->irq=irq;
 332         dev->chanA.private=&b->dev[0];
 333         dev->chanB.private=&b->dev[1];
 334         dev->chanA.netdevice=b->dev[0]->pppdev.dev;
 335         dev->chanB.netdevice=b->dev[1]->pppdev.dev;
 336         dev->chanA.dev=dev;
 337         dev->chanB.dev=dev;
 338
 339         dev->chanA.txdma=3;
 340         dev->chanA.rxdma=1;
 341         if(request_dma(dev->chanA.txdma, "SeaLevel (TX)")!=0)
 342                 goto fail;
 343
 344         if(request_dma(dev->chanA.rxdma, "SeaLevel (RX)")!=0)
 345                 goto dmafail;
 346
 347         disable_irq(irq);
 348
 349         /*
 350          *      Begin normal initialise
 351          */
 352
 353         if(z8530_init(dev)!=0)
 354         {
 355                 printk(KERN_ERR "Z8530 series device not found.\n");
 356                 enable_irq(irq);
 357                 goto dmafail2;
 358         }
 359         if(dev->type==Z85C30)
 360         {
 361                 z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream);
 362                 z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream);
 363         }
 364         else
 365         {
 366                 z8530_channel_load(&dev->chanA, z8530_hdlc_kilostream_85230);
 367                 z8530_channel_load(&dev->chanB, z8530_hdlc_kilostream_85230);
 368         }
 369
 370         /*
 371          *      Now we can take the IRQ
 372          */
 373
 374         enable_irq(irq);
 375
 376         if (register_netdev(b->dev[0]->pppdev.dev))
 377                 goto dmafail2;
 378
 379         if (register_netdev(b->dev[1]->pppdev.dev))
 380                 goto fail_unit;
 381
 382         z8530_describe(dev, "I/O", iobase);
 383         dev->active=1;
 384         return b;
 385
 386 fail_unit:
 387         unregister_netdev(b->dev[0]->pppdev.dev);
 388
 389 dmafail2:
 390         free_dma(dev->chanA.rxdma);
 391 dmafail:
 392         free_dma(dev->chanA.txdma);
 393 fail:
 394         free_irq(irq, dev);
 395 fail1_1:
 396         free_netdev(b->dev[1]->pppdev.dev);
 397 fail1_0:
 398         free_netdev(b->dev[0]->pppdev.dev);
 399 fail2:
 400         kfree(b);
 401 fail3:
 402         release_region(iobase,8);
 403         return NULL;
 404 }
 405
 406 static void __exit slvl_shutdown(struct slvl_board *b)
 407 {
 408         int u;
 409
 410         z8530_shutdown(&b->board);
 411
 412         for(u=0; u<2; u++)
 413         {
 414                 struct net_device *d = b->dev[u]->pppdev.dev;
 415                 unregister_netdev(d);
 416                 free_netdev(d);
 417         }
 418
 419         free_irq(b->board.irq, &b->board);
 420         free_dma(b->board.chanA.rxdma);
 421         free_dma(b->board.chanA.txdma);
 422         /* DMA off on the card, drop DTR */
 423         outb(0, b->iobase);
 424         release_region(b->iobase, 8);
 425         kfree(b);
 426 }
 427
 428
 429 static int io=0x238;
 430 static int txdma=1;
 431 static int rxdma=3;
 432 static int irq=5;
 433 static int slow=0;
 434
 435 module_param(io, int, 0);
 436 MODULE_PARM_DESC(io, "The I/O base of the Sealevel card");
 437 module_param(txdma, int, 0);
 438 MODULE_PARM_DESC(txdma, "Transmit DMA channel");
 439 module_param(rxdma, int, 0);
 440 MODULE_PARM_DESC(rxdma, "Receive DMA channel");
 441 module_param(irq, int, 0);
 442 MODULE_PARM_DESC(irq, "The interrupt line setting for the SeaLevel card");
 443 module_param(slow, bool, 0);
 444 MODULE_PARM_DESC(slow, "Set this for an older Sealevel card such as the 4012");
 445
 446 MODULE_AUTHOR("Alan Cox");
 447 MODULE_LICENSE("GPL");
 448 MODULE_DESCRIPTION("Modular driver for the SeaLevel 4021");
 449
 450 static struct slvl_board *slvl_unit;
 451
 452 static int __init slvl_init_module(void)
 453 {
 454 #ifdef MODULE
 455         printk(KERN_INFO "SeaLevel Z85230 Synchronous Driver v 0.02.\n");
 456         printk(KERN_INFO "(c) Copyright 1998, Building Number Three Ltd.\n");
 457 #endif
 458         slvl_unit = slvl_init(io, irq, txdma, rxdma, slow);
 459
 460         return slvl_unit ? 0 : -ENODEV;
 461 }
 462
 463 static void __exit slvl_cleanup_module(void)
 464 {
 465         if(slvl_unit)
 466                 slvl_shutdown(slvl_unit);
 467 }
 468
 469 module_init(slvl_init_module);
 470 module_exit(slvl_cleanup_module);