1 /* [xirc2ps_cs.c wk 03.11.99] (1.40 1999/11/18 00:06:03)
2 * Xircom CreditCard Ethernet Adapter IIps driver
3 * Xircom Realport 10/100 (RE-100) driver
5 * This driver supports various Xircom CreditCard Ethernet adapters
6 * including the CE2, CE IIps, RE-10, CEM28, CEM33, CE33, CEM56,
7 * CE3-100, CE3B, RE-100, REM10BT, and REM56G-100.
9 * 2000-09-24 <psheer@icon.co.za> The Xircom CE3B-100 may not
10 * autodetect the media properly. In this case use the
11 * if_port=1 (for 10BaseT) or if_port=4 (for 100BaseT) options
12 * to force the media type.
14 * Written originally by Werner Koch based on David Hinds' skeleton of the
17 * Copyright (c) 1997,1998 Werner Koch (dd9jn)
19 * This driver is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License as published by
21 * the Free Software Foundation; either version 2 of the License, or
22 * (at your option) any later version.
24 * It is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
29 * You should have received a copy of the GNU General Public License
30 * along with this program; if not, write to the Free Software
31 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
34 * ALTERNATIVELY, this driver may be distributed under the terms of
35 * the following license, in which case the provisions of this license
36 * are required INSTEAD OF the GNU General Public License. (This clause
37 * is necessary due to a potential bad interaction between the GPL and
38 * the restrictions contained in a BSD-style copyright.)
40 * Redistribution and use in source and binary forms, with or without
41 * modification, are permitted provided that the following conditions
43 * 1. Redistributions of source code must retain the above copyright
44 * notice, and the entire permission notice in its entirety,
45 * including the disclaimer of warranties.
46 * 2. Redistributions in binary form must reproduce the above copyright
47 * notice, this list of conditions and the following disclaimer in the
48 * documentation and/or other materials provided with the distribution.
49 * 3. The name of the author may not be used to endorse or promote
50 * products derived from this software without specific prior
53 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
54 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
55 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
56 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
57 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
58 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
59 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
60 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
61 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
62 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
63 * OF THE POSSIBILITY OF SUCH DAMAGE.
66 #include <linux/module.h>
67 #include <linux/kernel.h>
68 #include <linux/init.h>
69 #include <linux/ptrace.h>
70 #include <linux/slab.h>
71 #include <linux/string.h>
72 #include <linux/timer.h>
73 #include <linux/interrupt.h>
75 #include <linux/delay.h>
76 #include <linux/ethtool.h>
77 #include <linux/netdevice.h>
78 #include <linux/etherdevice.h>
79 #include <linux/skbuff.h>
80 #include <linux/if_arp.h>
81 #include <linux/ioport.h>
82 #include <linux/bitops.h>
83 #include <linux/mii.h>
85 #include <pcmcia/cistpl.h>
86 #include <pcmcia/cisreg.h>
87 #include <pcmcia/ciscode.h>
90 #include <asm/system.h>
91 #include <asm/uaccess.h>
94 #define MANFID_COMPAQ 0x0138
95 #define MANFID_COMPAQ2 0x0183 /* is this correct? */
98 #include <pcmcia/ds.h>
100 /* Time in jiffies before concluding Tx hung */
101 #define TX_TIMEOUT ((400*HZ)/1000)
104 * Some constants used to access the hardware
107 /* Register offsets and value constans */
108 #define XIRCREG_CR 0 /* Command register (wr) */
110 TransmitPacket = 0x01,
118 #define XIRCREG_ESR 0 /* Ethernet status register (rd) */
120 FullPktRcvd = 0x01, /* full packet in receive buffer */
121 PktRejected = 0x04, /* a packet has been rejected */
122 TxPktPend = 0x08, /* TX Packet Pending */
123 IncorPolarity = 0x10,
124 MediaSelect = 0x20 /* set if TP, clear if AUI */
126 #define XIRCREG_PR 1 /* Page Register select */
127 #define XIRCREG_EDP 4 /* Ethernet Data Port Register */
128 #define XIRCREG_ISR 6 /* Ethernet Interrupt Status Register */
130 TxBufOvr = 0x01, /* TX Buffer Overflow */
131 PktTxed = 0x02, /* Packet Transmitted */
132 MACIntr = 0x04, /* MAC Interrupt occurred */
133 TxResGrant = 0x08, /* Tx Reservation Granted */
134 RxFullPkt = 0x20, /* Rx Full Packet */
135 RxPktRej = 0x40, /* Rx Packet Rejected */
136 ForcedIntr= 0x80 /* Forced Interrupt */
138 #define XIRCREG1_IMR0 12 /* Ethernet Interrupt Mask Register (on page 1)*/
139 #define XIRCREG1_IMR1 13
140 #define XIRCREG0_TSO 8 /* Transmit Space Open Register (on page 0)*/
141 #define XIRCREG0_TRS 10 /* Transmit reservation Size Register (page 0)*/
142 #define XIRCREG0_DO 12 /* Data Offset Register (page 0) (wr) */
143 #define XIRCREG0_RSR 12 /* Receive Status Register (page 0) (rd) */
145 PhyPkt = 0x01, /* set:physical packet, clear: multicast packet */
146 BrdcstPkt = 0x02, /* set if it is a broadcast packet */
147 PktTooLong = 0x04, /* set if packet length > 1518 */
148 AlignErr = 0x10, /* incorrect CRC and last octet not complete */
149 CRCErr = 0x20, /* incorrect CRC and last octet is complete */
150 PktRxOk = 0x80 /* received ok */
152 #define XIRCREG0_PTR 13 /* packets transmitted register (rd) */
153 #define XIRCREG0_RBC 14 /* receive byte count regsister (rd) */
154 #define XIRCREG1_ECR 14 /* ethernet configurationn register */
156 FullDuplex = 0x04, /* enable full duplex mode */
157 LongTPMode = 0x08, /* adjust for longer lengths of TP cable */
158 DisablePolCor = 0x10,/* disable auto polarity correction */
159 DisableLinkPulse = 0x20, /* disable link pulse generation */
160 DisableAutoTx = 0x40, /* disable auto-transmit */
162 #define XIRCREG2_RBS 8 /* receive buffer start register */
163 #define XIRCREG2_LED 10 /* LED Configuration register */
164 /* values for the leds: Bits 2-0 for led 1
165 * 0 disabled Bits 5-3 for led 2
174 #define XIRCREG2_MSR 12 /* Mohawk specific register */
176 #define XIRCREG4_GPR0 8 /* General Purpose Register 0 */
177 #define XIRCREG4_GPR1 9 /* General Purpose Register 1 */
178 #define XIRCREG2_GPR2 13 /* General Purpose Register 2 (page2!)*/
179 #define XIRCREG4_BOV 10 /* Bonding Version Register */
180 #define XIRCREG4_LMA 12 /* Local Memory Address Register */
181 #define XIRCREG4_LMD 14 /* Local Memory Data Port */
182 /* MAC register can only by accessed with 8 bit operations */
183 #define XIRCREG40_CMD0 8 /* Command Register (wr) */
184 enum xirc_cmd { /* Commands */
193 #define XIRCREG5_RHSA0 10 /* Rx Host Start Address */
194 #define XIRCREG40_RXST0 9 /* Receive Status Register */
195 #define XIRCREG40_TXST0 11 /* Transmit Status Register 0 */
196 #define XIRCREG40_TXST1 12 /* Transmit Status Register 10 */
197 #define XIRCREG40_RMASK0 13 /* Receive Mask Register */
198 #define XIRCREG40_TMASK0 14 /* Transmit Mask Register 0 */
199 #define XIRCREG40_TMASK1 15 /* Transmit Mask Register 0 */
200 #define XIRCREG42_SWC0 8 /* Software Configuration 0 */
201 #define XIRCREG42_SWC1 9 /* Software Configuration 1 */
202 #define XIRCREG42_BOC 10 /* Back-Off Configuration */
203 #define XIRCREG44_TDR0 8 /* Time Domain Reflectometry 0 */
204 #define XIRCREG44_TDR1 9 /* Time Domain Reflectometry 1 */
205 #define XIRCREG44_RXBC_LO 10 /* Rx Byte Count 0 (rd) */
206 #define XIRCREG44_RXBC_HI 11 /* Rx Byte Count 1 (rd) */
207 #define XIRCREG45_REV 15 /* Revision Register (rd) */
208 #define XIRCREG50_IA 8 /* Individual Address (8-13) */
210 static const char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
213 #define KDBG_XIRC KERN_DEBUG "xirc2ps_cs: "
214 #define KERR_XIRC KERN_ERR "xirc2ps_cs: "
215 #define KWRN_XIRC KERN_WARNING "xirc2ps_cs: "
216 #define KNOT_XIRC KERN_NOTICE "xirc2ps_cs: "
217 #define KINF_XIRC KERN_INFO "xirc2ps_cs: "
220 #define XIR_UNKNOWN 0 /* unknown: not supported */
221 #define XIR_CE 1 /* (prodid 1) different hardware: not supported */
222 #define XIR_CE2 2 /* (prodid 2) */
223 #define XIR_CE3 3 /* (prodid 3) */
224 #define XIR_CEM 4 /* (prodid 1) different hardware: not supported */
225 #define XIR_CEM2 5 /* (prodid 2) */
226 #define XIR_CEM3 6 /* (prodid 3) */
227 #define XIR_CEM33 7 /* (prodid 4) */
228 #define XIR_CEM56M 8 /* (prodid 5) */
229 #define XIR_CEM56 9 /* (prodid 6) */
230 #define XIR_CM28 10 /* (prodid 3) modem only: not supported here */
231 #define XIR_CM33 11 /* (prodid 4) modem only: not supported here */
232 #define XIR_CM56 12 /* (prodid 5) modem only: not supported here */
233 #define XIR_CG 13 /* (prodid 1) GSM modem only: not supported */
234 #define XIR_CBE 14 /* (prodid 1) cardbus ethernet: not supported */
235 /*====================================================================*/
237 /* Module parameters */
239 MODULE_DESCRIPTION("Xircom PCMCIA ethernet driver");
240 MODULE_LICENSE("Dual MPL/GPL");
242 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
244 INT_MODULE_PARM(if_port, 0);
245 INT_MODULE_PARM(full_duplex, 0);
246 INT_MODULE_PARM(do_sound, 1);
247 INT_MODULE_PARM(lockup_hack, 0); /* anti lockup hack */
249 /*====================================================================*/
251 /* We do not process more than these number of bytes during one
252 * interrupt. (Of course we receive complete packets, so this is not
254 * Something between 2000..22000; first value gives best interrupt latency,
255 * the second enables the usage of the complete on-chip buffer. We use the
256 * high value as the initial value.
258 static unsigned maxrx_bytes = 22000;
260 /* MII management prototypes */
261 static void mii_idle(unsigned int ioaddr);
262 static void mii_putbit(unsigned int ioaddr, unsigned data);
263 static int mii_getbit(unsigned int ioaddr);
264 static void mii_wbits(unsigned int ioaddr, unsigned data, int len);
265 static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg);
266 static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg,
267 unsigned data, int len);
270 * The event() function is this driver's Card Services event handler.
271 * It will be called by Card Services when an appropriate card status
272 * event is received. The config() and release() entry points are
273 * used to configure or release a socket, in response to card insertion
274 * and ejection events. They are invoked from the event handler.
277 static int has_ce2_string(struct pcmcia_device * link);
278 static int xirc2ps_config(struct pcmcia_device * link);
279 static void xirc2ps_release(struct pcmcia_device * link);
282 * The attach() and detach() entry points are used to create and destroy
283 * "instances" of the driver, where each instance represents everything
284 * needed to manage one actual PCMCIA card.
287 static void xirc2ps_detach(struct pcmcia_device *p_dev);
290 * You'll also need to prototype all the functions that will actually
291 * be used to talk to your device. See 'pcmem_cs' for a good example
292 * of a fully self-sufficient driver; the other drivers rely more or
293 * less on other parts of the kernel.
296 static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id);
298 typedef struct local_info_t {
299 struct net_device *dev;
300 struct pcmcia_device *p_dev;
304 int silicon; /* silicon revision. 0=old CE2, 1=Scipper, 4=Mohawk */
305 int mohawk; /* a CE3 type card */
306 int dingo; /* a CEM56 type card */
307 int new_mii; /* has full 10baseT/100baseT MII */
308 int modem; /* is a multi function card (i.e with a modem) */
309 void __iomem *dingo_ccr; /* only used for CEM56 cards */
310 unsigned last_ptr_value; /* last packets transmitted value */
311 const char *manf_str;
312 struct work_struct tx_timeout_task;
316 * Some more prototypes
318 static netdev_tx_t do_start_xmit(struct sk_buff *skb,
319 struct net_device *dev);
320 static void xirc_tx_timeout(struct net_device *dev);
321 static void xirc2ps_tx_timeout_task(struct work_struct *work);
322 static void set_addresses(struct net_device *dev);
323 static void set_multicast_list(struct net_device *dev);
324 static int set_card_type(struct pcmcia_device *link);
325 static int do_config(struct net_device *dev, struct ifmap *map);
326 static int do_open(struct net_device *dev);
327 static int do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
328 static const struct ethtool_ops netdev_ethtool_ops;
329 static void hardreset(struct net_device *dev);
330 static void do_reset(struct net_device *dev, int full);
331 static int init_mii(struct net_device *dev);
332 static void do_powerdown(struct net_device *dev);
333 static int do_stop(struct net_device *dev);
335 /*=============== Helper functions =========================*/
336 #define SelectPage(pgnr) outb((pgnr), ioaddr + XIRCREG_PR)
337 #define GetByte(reg) ((unsigned)inb(ioaddr + (reg)))
338 #define GetWord(reg) ((unsigned)inw(ioaddr + (reg)))
339 #define PutByte(reg,value) outb((value), ioaddr+(reg))
340 #define PutWord(reg,value) outw((value), ioaddr+(reg))
342 /*====== Functions used for debugging =================================*/
343 #if 0 /* reading regs may change system status */
345 PrintRegisters(struct net_device *dev)
347 unsigned int ioaddr = dev->base_addr;
352 printk(KDBG_XIRC "Register common: ");
353 for (i = 0; i < 8; i++)
354 printk(" %2.2x", GetByte(i));
356 for (page = 0; page <= 8; page++) {
357 printk(KDBG_XIRC "Register page %2x: ", page);
359 for (i = 8; i < 16; i++)
360 printk(" %2.2x", GetByte(i));
363 for (page=0x40 ; page <= 0x5f; page++) {
364 if (page == 0x43 || (page >= 0x46 && page <= 0x4f) ||
365 (page >= 0x51 && page <=0x5e))
367 printk(KDBG_XIRC "Register page %2x: ", page);
369 for (i = 8; i < 16; i++)
370 printk(" %2.2x", GetByte(i));
377 /*============== MII Management functions ===============*/
380 * Turn around for read
383 mii_idle(unsigned int ioaddr)
385 PutByte(XIRCREG2_GPR2, 0x04|0); /* drive MDCK low */
387 PutByte(XIRCREG2_GPR2, 0x04|1); /* and drive MDCK high */
392 * Write a bit to MDI/O
395 mii_putbit(unsigned int ioaddr, unsigned data)
399 PutByte(XIRCREG2_GPR2, 0x0c|2|0); /* set MDIO */
401 PutByte(XIRCREG2_GPR2, 0x0c|2|1); /* and drive MDCK high */
404 PutByte(XIRCREG2_GPR2, 0x0c|0|0); /* clear MDIO */
406 PutByte(XIRCREG2_GPR2, 0x0c|0|1); /* and drive MDCK high */
411 PutWord(XIRCREG2_GPR2-1, 0x0e0e);
413 PutWord(XIRCREG2_GPR2-1, 0x0f0f);
416 PutWord(XIRCREG2_GPR2-1, 0x0c0c);
418 PutWord(XIRCREG2_GPR2-1, 0x0d0d);
425 * Get a bit from MDI/O
428 mii_getbit(unsigned int ioaddr)
432 PutByte(XIRCREG2_GPR2, 4|0); /* drive MDCK low */
434 d = GetByte(XIRCREG2_GPR2); /* read MDIO */
435 PutByte(XIRCREG2_GPR2, 4|1); /* drive MDCK high again */
437 return d & 0x20; /* read MDIO */
441 mii_wbits(unsigned int ioaddr, unsigned data, int len)
443 unsigned m = 1 << (len-1);
445 mii_putbit(ioaddr, data & m);
449 mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg)
455 for (i=0; i < 32; i++) /* 32 bit preamble */
456 mii_putbit(ioaddr, 1);
457 mii_wbits(ioaddr, 0x06, 4); /* Start and opcode for read */
458 mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */
459 mii_wbits(ioaddr, phyreg, 5); /* PHY register to read */
460 mii_idle(ioaddr); /* turn around */
463 for (m = 1<<15; m; m >>= 1)
464 if (mii_getbit(ioaddr))
471 mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, unsigned data,
477 for (i=0; i < 32; i++) /* 32 bit preamble */
478 mii_putbit(ioaddr, 1);
479 mii_wbits(ioaddr, 0x05, 4); /* Start and opcode for write */
480 mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */
481 mii_wbits(ioaddr, phyreg, 5); /* PHY Register to write */
482 mii_putbit(ioaddr, 1); /* turn around */
483 mii_putbit(ioaddr, 0);
484 mii_wbits(ioaddr, data, len); /* And write the data */
488 /*============= Main bulk of functions =========================*/
490 static const struct net_device_ops netdev_ops = {
493 .ndo_start_xmit = do_start_xmit,
494 .ndo_tx_timeout = xirc_tx_timeout,
495 .ndo_set_config = do_config,
496 .ndo_do_ioctl = do_ioctl,
497 .ndo_set_multicast_list = set_multicast_list,
498 .ndo_change_mtu = eth_change_mtu,
499 .ndo_set_mac_address = eth_mac_addr,
500 .ndo_validate_addr = eth_validate_addr,
504 * xirc2ps_attach() creates an "instance" of the driver, allocating
505 * local data structures for one device. The device is registered
506 * with Card Services.
508 * The dev_link structure is initialized, but we don't actually
509 * configure the card at this point -- we wait until we receive a
510 * card insertion event.
514 xirc2ps_probe(struct pcmcia_device *link)
516 struct net_device *dev;
519 dev_dbg(&link->dev, "attach()\n");
521 /* Allocate the device structure */
522 dev = alloc_etherdev(sizeof(local_info_t));
525 local = netdev_priv(dev);
530 /* General socket configuration */
531 link->config_flags |= CONF_ENABLE_IRQ;
532 link->config_index = 1;
534 /* Fill in card specific entries */
535 dev->netdev_ops = &netdev_ops;
536 dev->ethtool_ops = &netdev_ethtool_ops;
537 dev->watchdog_timeo = TX_TIMEOUT;
538 INIT_WORK(&local->tx_timeout_task, xirc2ps_tx_timeout_task);
540 return xirc2ps_config(link);
541 } /* xirc2ps_attach */
544 * This deletes a driver "instance". The device is de-registered
545 * with Card Services. If it has been released, all local data
546 * structures are freed. Otherwise, the structures will be freed
547 * when the device is released.
551 xirc2ps_detach(struct pcmcia_device *link)
553 struct net_device *dev = link->priv;
555 dev_dbg(&link->dev, "detach\n");
557 unregister_netdev(dev);
559 xirc2ps_release(link);
562 } /* xirc2ps_detach */
565 * Detect the type of the card. s is the buffer with the data of tuple 0x20
566 * Returns: 0 := not supported
567 * mediaid=11 and prodid=47
583 set_card_type(struct pcmcia_device *link)
585 struct net_device *dev = link->priv;
586 local_info_t *local = netdev_priv(dev);
588 unsigned int cisrev, mediaid, prodid;
591 len = pcmcia_get_tuple(link, CISTPL_MANFID, &buf);
593 dev_err(&link->dev, "invalid CIS -- sorry\n");
601 dev_dbg(&link->dev, "cisrev=%02x mediaid=%02x prodid=%02x\n",
602 cisrev, mediaid, prodid);
607 local->card_type = XIR_UNKNOWN;
608 if (!(prodid & 0x40)) {
609 printk(KNOT_XIRC "Ooops: Not a creditcard\n");
612 if (!(mediaid & 0x01)) {
613 printk(KNOT_XIRC "Not an Ethernet card\n");
616 if (mediaid & 0x10) {
618 switch(prodid & 15) {
619 case 1: local->card_type = XIR_CEM ; break;
620 case 2: local->card_type = XIR_CEM2 ; break;
621 case 3: local->card_type = XIR_CEM3 ; break;
622 case 4: local->card_type = XIR_CEM33 ; break;
623 case 5: local->card_type = XIR_CEM56M;
627 case 7: /* 7 is the RealPort 10/56 */
628 local->card_type = XIR_CEM56 ;
634 switch(prodid & 15) {
635 case 1: local->card_type = has_ce2_string(link)? XIR_CE2 : XIR_CE ;
637 case 2: local->card_type = XIR_CE2; break;
638 case 3: local->card_type = XIR_CE3;
643 if (local->card_type == XIR_CE || local->card_type == XIR_CEM) {
644 printk(KNOT_XIRC "Sorry, this is an old CE card\n");
647 if (local->card_type == XIR_UNKNOWN)
648 printk(KNOT_XIRC "unknown card (mediaid=%02x prodid=%02x)\n",
655 * There are some CE2 cards out which claim to be a CE card.
656 * This function looks for a "CE2" in the 3rd version field.
657 * Returns: true if this is a CE2
660 has_ce2_string(struct pcmcia_device * p_dev)
662 if (p_dev->prod_id[2] && strstr(p_dev->prod_id[2], "CE2"))
668 xirc2ps_config_modem(struct pcmcia_device *p_dev,
669 cistpl_cftable_entry_t *cf,
670 cistpl_cftable_entry_t *dflt,
675 if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
676 for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
677 p_dev->resource[1]->start = cf->io.win[0].base;
678 p_dev->resource[0]->start = ioaddr;
679 if (!pcmcia_request_io(p_dev))
687 xirc2ps_config_check(struct pcmcia_device *p_dev,
688 cistpl_cftable_entry_t *cf,
689 cistpl_cftable_entry_t *dflt,
692 int *pass = priv_data;
694 if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
695 p_dev->resource[1]->start = cf->io.win[0].base;
696 p_dev->resource[0]->start = p_dev->resource[1]->start
697 + (*pass ? (cf->index & 0x20 ? -24:8)
698 : (cf->index & 0x20 ? 8:-24));
699 if (!pcmcia_request_io(p_dev))
707 static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev,
711 struct net_device *dev = priv;
714 if (tuple->TupleDataLen != 13)
716 if ((tuple->TupleData[0] != 2) || (tuple->TupleData[1] != 1) ||
717 (tuple->TupleData[2] != 6))
719 /* another try (James Lehmer's CE2 version 4.1)*/
720 for (i = 2; i < 6; i++)
721 dev->dev_addr[i] = tuple->TupleData[i+2];
727 * xirc2ps_config() is scheduled to run after a CARD_INSERTION event
728 * is received, to configure the PCMCIA socket, and to make the
729 * ethernet device available to the system.
732 xirc2ps_config(struct pcmcia_device * link)
734 struct net_device *dev = link->priv;
735 local_info_t *local = netdev_priv(dev);
741 local->dingo_ccr = NULL;
743 dev_dbg(&link->dev, "config\n");
745 /* Is this a valid card */
746 if (link->has_manf_id == 0) {
747 printk(KNOT_XIRC "manfid not found in CIS\n");
751 switch (link->manf_id) {
753 local->manf_str = "Xircom";
756 local->manf_str = "Accton";
760 local->manf_str = "Compaq";
763 local->manf_str = "Intel";
766 local->manf_str = "Toshiba";
769 printk(KNOT_XIRC "Unknown Card Manufacturer ID: 0x%04x\n",
770 (unsigned)link->manf_id);
773 dev_dbg(&link->dev, "found %s card\n", local->manf_str);
775 if (!set_card_type(link)) {
776 printk(KNOT_XIRC "this card is not supported\n");
780 /* get the ethernet address from the CIS */
781 err = pcmcia_get_mac_from_cis(link, dev);
783 /* not found: try to get the node-id from tuple 0x89 */
785 len = pcmcia_get_tuple(link, 0x89, &buf);
786 /* data layout looks like tuple 0x22 */
787 if (buf && len == 8) {
788 if (*buf == CISTPL_FUNCE_LAN_NODE_ID) {
790 for (i = 2; i < 6; i++)
791 dev->dev_addr[i] = buf[i+2];
799 err = pcmcia_loop_tuple(link, CISTPL_FUNCE, pcmcia_get_mac_ce, dev);
802 printk(KNOT_XIRC "node-id not found in CIS\n");
806 link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
811 link->resource[1]->end = 8;
812 link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
814 /* Take the Modem IO port from the CIS and scan for a free
816 link->resource[0]->end = 16; /* no Mako stuff anymore */
817 if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
820 link->resource[0]->end = 18;
821 /* We do 2 passes here: The first one uses the regular mapping and
822 * the second tries again, thereby considering that the 32 ports are
823 * mirrored every 32 bytes. Actually we use a mirrored port for
824 * the Mako if (on the first pass) the COR bit 5 is set.
826 for (pass=0; pass < 2; pass++)
827 if (!pcmcia_loop_config(link, xirc2ps_config_check,
830 /* if special option:
831 * try to configure as Ethernet only.
834 printk(KNOT_XIRC "no ports available\n");
836 link->resource[0]->end = 16;
837 for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
838 link->resource[0]->start = ioaddr;
839 if (!(err = pcmcia_request_io(link)))
842 link->resource[0]->start = 0; /* let CS decide */
843 if ((err = pcmcia_request_io(link)))
851 * Now allocate an interrupt line. Note that this does not
852 * actually assign a handler to the interrupt.
854 if ((err=pcmcia_request_irq(link, xirc2ps_interrupt)))
858 * This actually configures the PCMCIA socket -- setting up
859 * the I/O windows and the interrupt mapping.
861 link->config_flags |= CONF_ENABLE_IRQ;
863 link->config_flags |= CONF_ENABLE_SPKR;
865 if ((err = pcmcia_enable_device(link)))
869 /* Reset the modem's BAR to the correct value
870 * This is necessary because in the RequestConfiguration call,
871 * the base address of the ethernet port (BasePort1) is written
872 * to the BAR registers of the modem.
874 err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, (u8)
875 link->resource[1]->start & 0xff);
879 err = pcmcia_write_config_byte(link, CISREG_IOBASE_1,
880 (link->resource[1]->start >> 8) & 0xff);
884 /* There is no config entry for the Ethernet part which
885 * is at 0x0800. So we allocate a window into the attribute
886 * memory and write direct to the CIS registers
888 link->resource[2]->flags = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM |
890 link->resource[2]->start = link->resource[2]->end = 0;
891 if ((err = pcmcia_request_window(link, link->resource[2], 0)))
894 local->dingo_ccr = ioremap(link->resource[2]->start, 0x1000) + 0x0800;
895 if ((err = pcmcia_map_mem_page(link, link->resource[2], 0)))
898 /* Setup the CCRs; there are no infos in the CIS about the Ethernet
901 writeb(0x47, local->dingo_ccr + CISREG_COR);
902 ioaddr = link->resource[0]->start;
903 writeb(ioaddr & 0xff , local->dingo_ccr + CISREG_IOBASE_0);
904 writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1);
909 printk(KERN_INFO "ECOR:");
910 for (i=0; i < 7; i++) {
911 tmp = readb(local->dingo_ccr + i*2);
912 printk(" %02x", tmp);
915 printk(KERN_INFO "DCOR:");
916 for (i=0; i < 4; i++) {
917 tmp = readb(local->dingo_ccr + 0x20 + i*2);
918 printk(" %02x", tmp);
921 printk(KERN_INFO "SCOR:");
922 for (i=0; i < 10; i++) {
923 tmp = readb(local->dingo_ccr + 0x40 + i*2);
924 printk(" %02x", tmp);
930 writeb(0x01, local->dingo_ccr + 0x20);
931 writeb(0x0c, local->dingo_ccr + 0x22);
932 writeb(0x00, local->dingo_ccr + 0x24);
933 writeb(0x00, local->dingo_ccr + 0x26);
934 writeb(0x00, local->dingo_ccr + 0x28);
937 /* The if_port symbol can be set when the module is loaded */
940 local->probe_port = dev->if_port = 1;
941 } else if ((if_port >= 1 && if_port <= 2) ||
942 (local->mohawk && if_port==4))
943 dev->if_port = if_port;
945 printk(KNOT_XIRC "invalid if_port requested\n");
947 /* we can now register the device with the net subsystem */
948 dev->irq = link->irq;
949 dev->base_addr = link->resource[0]->start;
952 do_reset(dev, 1); /* a kludge to make the cem56 work */
954 SET_NETDEV_DEV(dev, &link->dev);
956 if ((err=register_netdev(dev))) {
957 printk(KNOT_XIRC "register_netdev() failed\n");
961 /* give some infos about the hardware */
962 printk(KERN_INFO "%s: %s: port %#3lx, irq %d, hwaddr %pM\n",
963 dev->name, local->manf_str,(u_long)dev->base_addr, (int)dev->irq,
969 xirc2ps_release(link);
974 } /* xirc2ps_config */
977 * After a card is removed, xirc2ps_release() will unregister the net
978 * device, and release the PCMCIA configuration. If the device is
979 * still open, this will be postponed until it is closed.
982 xirc2ps_release(struct pcmcia_device *link)
984 dev_dbg(&link->dev, "release\n");
986 if (link->resource[2]->end) {
987 struct net_device *dev = link->priv;
988 local_info_t *local = netdev_priv(dev);
990 iounmap(local->dingo_ccr - 0x0800);
992 pcmcia_disable_device(link);
993 } /* xirc2ps_release */
995 /*====================================================================*/
998 static int xirc2ps_suspend(struct pcmcia_device *link)
1000 struct net_device *dev = link->priv;
1003 netif_device_detach(dev);
1010 static int xirc2ps_resume(struct pcmcia_device *link)
1012 struct net_device *dev = link->priv;
1016 netif_device_attach(dev);
1023 /*====================================================================*/
1026 * This is the Interrupt service route.
1029 xirc2ps_interrupt(int irq, void *dev_id)
1031 struct net_device *dev = (struct net_device *)dev_id;
1032 local_info_t *lp = netdev_priv(dev);
1033 unsigned int ioaddr;
1035 unsigned bytes_rcvd;
1036 unsigned int_status, eth_status, rx_status, tx_status;
1037 unsigned rsr, pktlen;
1038 ulong start_ticks = jiffies; /* fixme: jiffies rollover every 497 days
1039 * is this something to worry about?
1043 if (!netif_device_present(dev))
1046 ioaddr = dev->base_addr;
1047 if (lp->mohawk) { /* must disable the interrupt */
1048 PutByte(XIRCREG_CR, 0);
1051 pr_debug("%s: interrupt %d at %#x.\n", dev->name, irq, ioaddr);
1053 saved_page = GetByte(XIRCREG_PR);
1054 /* Read the ISR to see whats the cause for the interrupt.
1055 * This also clears the interrupt flags on CE2 cards
1057 int_status = GetByte(XIRCREG_ISR);
1060 if (int_status == 0xff) { /* card may be ejected */
1061 pr_debug("%s: interrupt %d for dead card\n", dev->name, irq);
1064 eth_status = GetByte(XIRCREG_ESR);
1067 rx_status = GetByte(XIRCREG40_RXST0);
1068 PutByte(XIRCREG40_RXST0, (~rx_status & 0xff));
1069 tx_status = GetByte(XIRCREG40_TXST0);
1070 tx_status |= GetByte(XIRCREG40_TXST1) << 8;
1071 PutByte(XIRCREG40_TXST0, 0);
1072 PutByte(XIRCREG40_TXST1, 0);
1074 pr_debug("%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n",
1075 dev->name, int_status, eth_status, rx_status, tx_status);
1077 /***** receive section ******/
1079 while (eth_status & FullPktRcvd) {
1080 rsr = GetByte(XIRCREG0_RSR);
1081 if (bytes_rcvd > maxrx_bytes && (rsr & PktRxOk)) {
1082 /* too many bytes received during this int, drop the rest of the
1084 dev->stats.rx_dropped++;
1085 pr_debug("%s: RX drop, too much done\n", dev->name);
1086 } else if (rsr & PktRxOk) {
1087 struct sk_buff *skb;
1089 pktlen = GetWord(XIRCREG0_RBC);
1090 bytes_rcvd += pktlen;
1092 pr_debug("rsr=%#02x packet_length=%u\n", rsr, pktlen);
1094 skb = dev_alloc_skb(pktlen+3); /* 1 extra so we can use insw */
1096 printk(KNOT_XIRC "low memory, packet dropped (size=%u)\n",
1098 dev->stats.rx_dropped++;
1099 } else { /* okay get the packet */
1100 skb_reserve(skb, 2);
1101 if (lp->silicon == 0 ) { /* work around a hardware bug */
1102 unsigned rhsa; /* receive start address */
1105 rhsa = GetWord(XIRCREG5_RHSA0);
1107 rhsa += 3; /* skip control infos */
1110 if (rhsa + pktlen > 0x8000) {
1112 u_char *buf = skb_put(skb, pktlen);
1113 for (i=0; i < pktlen ; i++, rhsa++) {
1114 buf[i] = GetByte(XIRCREG_EDP);
1115 if (rhsa == 0x8000) {
1121 insw(ioaddr+XIRCREG_EDP,
1122 skb_put(skb, pktlen), (pktlen+1)>>1);
1126 else if (lp->mohawk) {
1127 /* To use this 32 bit access we should use
1128 * a manual optimized loop
1129 * Also the words are swapped, we can get more
1130 * performance by using 32 bit access and swapping
1131 * the words in a register. Will need this for cardbus
1133 * Note: don't forget to change the ALLOC_SKB to .. +3
1136 u_long *p = skb_put(skb, pktlen);
1138 unsigned int edpreg = ioaddr+XIRCREG_EDP-2;
1139 for (i=0; i < len ; i += 4, p++) {
1141 __asm__("rorl $16,%0\n\t"
1149 insw(ioaddr+XIRCREG_EDP, skb_put(skb, pktlen),
1152 skb->protocol = eth_type_trans(skb, dev);
1154 dev->stats.rx_packets++;
1155 dev->stats.rx_bytes += pktlen;
1156 if (!(rsr & PhyPkt))
1157 dev->stats.multicast++;
1159 } else { /* bad packet */
1160 pr_debug("rsr=%#02x\n", rsr);
1162 if (rsr & PktTooLong) {
1163 dev->stats.rx_frame_errors++;
1164 pr_debug("%s: Packet too long\n", dev->name);
1167 dev->stats.rx_crc_errors++;
1168 pr_debug("%s: CRC error\n", dev->name);
1170 if (rsr & AlignErr) {
1171 dev->stats.rx_fifo_errors++; /* okay ? */
1172 pr_debug("%s: Alignment error\n", dev->name);
1175 /* clear the received/dropped/error packet */
1176 PutWord(XIRCREG0_DO, 0x8000); /* issue cmd: skip_rx_packet */
1178 /* get the new ethernet status */
1179 eth_status = GetByte(XIRCREG_ESR);
1181 if (rx_status & 0x10) { /* Receive overrun */
1182 dev->stats.rx_over_errors++;
1183 PutByte(XIRCREG_CR, ClearRxOvrun);
1184 pr_debug("receive overrun cleared\n");
1187 /***** transmit section ******/
1188 if (int_status & PktTxed) {
1191 n = lp->last_ptr_value;
1192 nn = GetByte(XIRCREG0_PTR);
1193 lp->last_ptr_value = nn;
1194 if (nn < n) /* rollover */
1195 dev->stats.tx_packets += 256 - n;
1196 else if (n == nn) { /* happens sometimes - don't know why */
1197 pr_debug("PTR not changed?\n");
1199 dev->stats.tx_packets += lp->last_ptr_value - n;
1200 netif_wake_queue(dev);
1202 if (tx_status & 0x0002) { /* Execessive collissions */
1203 pr_debug("tx restarted due to execssive collissions\n");
1204 PutByte(XIRCREG_CR, RestartTx); /* restart transmitter process */
1206 if (tx_status & 0x0040)
1207 dev->stats.tx_aborted_errors++;
1209 /* recalculate our work chunk so that we limit the duration of this
1210 * ISR to about 1/10 of a second.
1211 * Calculate only if we received a reasonable amount of bytes.
1213 if (bytes_rcvd > 1000) {
1214 u_long duration = jiffies - start_ticks;
1216 if (duration >= HZ/10) { /* if more than about 1/10 second */
1217 maxrx_bytes = (bytes_rcvd * (HZ/10)) / duration;
1218 if (maxrx_bytes < 2000)
1220 else if (maxrx_bytes > 22000)
1221 maxrx_bytes = 22000;
1222 pr_debug("set maxrx=%u (rcvd=%u ticks=%lu)\n",
1223 maxrx_bytes, bytes_rcvd, duration);
1224 } else if (!duration && maxrx_bytes < 22000) {
1225 /* now much faster */
1226 maxrx_bytes += 2000;
1227 if (maxrx_bytes > 22000)
1228 maxrx_bytes = 22000;
1229 pr_debug("set maxrx=%u\n", maxrx_bytes);
1235 if (int_status != 0xff && (int_status = GetByte(XIRCREG_ISR)) != 0)
1238 SelectPage(saved_page);
1239 PutByte(XIRCREG_CR, EnableIntr); /* re-enable interrupts */
1240 /* Instead of dropping packets during a receive, we could
1241 * force an interrupt with this command:
1242 * PutByte(XIRCREG_CR, EnableIntr|ForceIntr);
1245 } /* xirc2ps_interrupt */
1247 /*====================================================================*/
1250 xirc2ps_tx_timeout_task(struct work_struct *work)
1252 local_info_t *local =
1253 container_of(work, local_info_t, tx_timeout_task);
1254 struct net_device *dev = local->dev;
1255 /* reset the card */
1257 dev->trans_start = jiffies; /* prevent tx timeout */
1258 netif_wake_queue(dev);
1262 xirc_tx_timeout(struct net_device *dev)
1264 local_info_t *lp = netdev_priv(dev);
1265 dev->stats.tx_errors++;
1266 printk(KERN_NOTICE "%s: transmit timed out\n", dev->name);
1267 schedule_work(&lp->tx_timeout_task);
1271 do_start_xmit(struct sk_buff *skb, struct net_device *dev)
1273 local_info_t *lp = netdev_priv(dev);
1274 unsigned int ioaddr = dev->base_addr;
1277 unsigned pktlen = skb->len;
1279 pr_debug("do_start_xmit(skb=%p, dev=%p) len=%u\n",
1283 /* adjust the packet length to min. required
1284 * and hope that the buffer is large enough
1285 * to provide some random data.
1286 * fixme: For Mohawk we can change this by sending
1287 * a larger packetlen than we actually have; the chip will
1288 * pad this in his buffer with random bytes
1290 if (pktlen < ETH_ZLEN)
1292 if (skb_padto(skb, ETH_ZLEN))
1293 return NETDEV_TX_OK;
1297 netif_stop_queue(dev);
1299 PutWord(XIRCREG0_TRS, (u_short)pktlen+2);
1300 freespace = GetWord(XIRCREG0_TSO);
1301 okay = freespace & 0x8000;
1302 freespace &= 0x7fff;
1303 /* TRS doesn't work - (indeed it is eliminated with sil-rev 1) */
1304 okay = pktlen +2 < freespace;
1305 pr_debug("%s: avail. tx space=%u%s\n",
1306 dev->name, freespace, okay ? " (okay)":" (not enough)");
1307 if (!okay) { /* not enough space */
1308 return NETDEV_TX_BUSY; /* upper layer may decide to requeue this packet */
1310 /* send the packet */
1311 PutWord(XIRCREG_EDP, (u_short)pktlen);
1312 outsw(ioaddr+XIRCREG_EDP, skb->data, pktlen>>1);
1314 PutByte(XIRCREG_EDP, skb->data[pktlen-1]);
1317 PutByte(XIRCREG_CR, TransmitPacket|EnableIntr);
1319 dev_kfree_skb (skb);
1320 dev->stats.tx_bytes += pktlen;
1321 netif_start_queue(dev);
1322 return NETDEV_TX_OK;
1325 struct set_address_info {
1329 unsigned int ioaddr;
1332 static void set_address(struct set_address_info *sa_info, char *addr)
1334 unsigned int ioaddr = sa_info->ioaddr;
1337 for (i = 0; i < 6; i++) {
1338 if (sa_info->reg_nr > 15) {
1339 sa_info->reg_nr = 8;
1341 SelectPage(sa_info->page_nr);
1343 if (sa_info->mohawk)
1344 PutByte(sa_info->reg_nr++, addr[5 - i]);
1346 PutByte(sa_info->reg_nr++, addr[i]);
1351 * Set all addresses: This first one is the individual address,
1352 * the next 9 addresses are taken from the multicast list and
1353 * the rest is filled with the individual address.
1355 static void set_addresses(struct net_device *dev)
1357 unsigned int ioaddr = dev->base_addr;
1358 local_info_t *lp = netdev_priv(dev);
1359 struct netdev_hw_addr *ha;
1360 struct set_address_info sa_info;
1364 * Setup the info structure so that by first set_address call it will do
1365 * SelectPage with the right page number. Hence these ones here.
1367 sa_info.reg_nr = 15 + 1;
1368 sa_info.page_nr = 0x50 - 1;
1369 sa_info.mohawk = lp->mohawk;
1370 sa_info.ioaddr = ioaddr;
1372 set_address(&sa_info, dev->dev_addr);
1374 netdev_for_each_mc_addr(ha, dev) {
1377 set_address(&sa_info, ha->addr);
1380 set_address(&sa_info, dev->dev_addr);
1385 * Set or clear the multicast filter for this adaptor.
1386 * We can filter up to 9 addresses, if more are requested we set
1387 * multicast promiscuous mode.
1391 set_multicast_list(struct net_device *dev)
1393 unsigned int ioaddr = dev->base_addr;
1397 value = GetByte(XIRCREG42_SWC1) & 0xC0;
1399 if (dev->flags & IFF_PROMISC) { /* snoop */
1400 PutByte(XIRCREG42_SWC1, value | 0x06); /* set MPE and PME */
1401 } else if (netdev_mc_count(dev) > 9 || (dev->flags & IFF_ALLMULTI)) {
1402 PutByte(XIRCREG42_SWC1, value | 0x02); /* set MPE */
1403 } else if (!netdev_mc_empty(dev)) {
1404 /* the chip can filter 9 addresses perfectly */
1405 PutByte(XIRCREG42_SWC1, value | 0x01);
1407 PutByte(XIRCREG40_CMD0, Offline);
1410 PutByte(XIRCREG40_CMD0, EnableRecv | Online);
1411 } else { /* standard usage */
1412 PutByte(XIRCREG42_SWC1, value | 0x00);
1418 do_config(struct net_device *dev, struct ifmap *map)
1420 local_info_t *local = netdev_priv(dev);
1422 pr_debug("do_config(%p)\n", dev);
1423 if (map->port != 255 && map->port != dev->if_port) {
1427 local->probe_port = 1;
1430 local->probe_port = 0;
1431 dev->if_port = map->port;
1433 printk(KERN_INFO "%s: switching to %s port\n",
1434 dev->name, if_names[dev->if_port]);
1435 do_reset(dev,1); /* not the fine way :-) */
1444 do_open(struct net_device *dev)
1446 local_info_t *lp = netdev_priv(dev);
1447 struct pcmcia_device *link = lp->p_dev;
1449 dev_dbg(&link->dev, "do_open(%p)\n", dev);
1451 /* Check that the PCMCIA card is still here. */
1452 /* Physical device present signature. */
1453 if (!pcmcia_dev_present(link))
1459 netif_start_queue(dev);
1465 static void netdev_get_drvinfo(struct net_device *dev,
1466 struct ethtool_drvinfo *info)
1468 strcpy(info->driver, "xirc2ps_cs");
1469 sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
1472 static const struct ethtool_ops netdev_ethtool_ops = {
1473 .get_drvinfo = netdev_get_drvinfo,
1477 do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1479 local_info_t *local = netdev_priv(dev);
1480 unsigned int ioaddr = dev->base_addr;
1481 struct mii_ioctl_data *data = if_mii(rq);
1483 pr_debug("%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n",
1484 dev->name, rq->ifr_ifrn.ifrn_name, cmd,
1485 data->phy_id, data->reg_num, data->val_in, data->val_out);
1491 case SIOCGMIIPHY: /* Get the address of the PHY in use. */
1492 data->phy_id = 0; /* we have only this address */
1494 case SIOCGMIIREG: /* Read the specified MII register. */
1495 data->val_out = mii_rd(ioaddr, data->phy_id & 0x1f,
1496 data->reg_num & 0x1f);
1498 case SIOCSMIIREG: /* Write the specified MII register */
1499 mii_wr(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in,
1509 hardreset(struct net_device *dev)
1511 local_info_t *local = netdev_priv(dev);
1512 unsigned int ioaddr = dev->base_addr;
1516 PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
1517 msleep(40); /* wait 40 msec */
1519 PutByte(XIRCREG4_GPR1, 1); /* set bit 0: power up */
1521 PutByte(XIRCREG4_GPR1, 1 | 4); /* set bit 0: power up, bit 2: AIC */
1522 msleep(20); /* wait 20 msec */
1526 do_reset(struct net_device *dev, int full)
1528 local_info_t *local = netdev_priv(dev);
1529 unsigned int ioaddr = dev->base_addr;
1532 pr_debug("%s: do_reset(%p,%d)\n", dev? dev->name:"eth?", dev, full);
1535 PutByte(XIRCREG_CR, SoftReset); /* set */
1536 msleep(20); /* wait 20 msec */
1537 PutByte(XIRCREG_CR, 0); /* clear */
1538 msleep(40); /* wait 40 msec */
1539 if (local->mohawk) {
1541 /* set pin GP1 and GP2 to output (0x0c)
1542 * set GP1 to low to power up the ML6692 (0x00)
1543 * set GP2 to high to power up the 10Mhz chip (0x02)
1545 PutByte(XIRCREG4_GPR0, 0x0e);
1548 /* give the circuits some time to power up */
1549 msleep(500); /* about 500ms */
1551 local->last_ptr_value = 0;
1552 local->silicon = local->mohawk ? (GetByte(XIRCREG4_BOV) & 0x70) >> 4
1553 : (GetByte(XIRCREG4_BOV) & 0x30) >> 4;
1555 if (local->probe_port) {
1556 if (!local->mohawk) {
1558 PutByte(XIRCREG4_GPR0, 4);
1559 local->probe_port = 0;
1561 } else if (dev->if_port == 2) { /* enable 10Base2 */
1563 PutByte(XIRCREG42_SWC1, 0xC0);
1564 } else { /* enable 10BaseT */
1566 PutByte(XIRCREG42_SWC1, 0x80);
1568 msleep(40); /* wait 40 msec to let it complete */
1573 value = GetByte(XIRCREG_ESR); /* read the ESR */
1574 printk(KERN_DEBUG "%s: ESR is: %#02x\n", dev->name, value);
1580 PutByte(XIRCREG1_IMR0, 0xff); /* allow all ints */
1581 PutByte(XIRCREG1_IMR1, 1 ); /* and Set TxUnderrunDetect */
1582 value = GetByte(XIRCREG1_ECR);
1585 value |= DisableLinkPulse;
1586 PutByte(XIRCREG1_ECR, value);
1588 pr_debug("%s: ECR is: %#02x\n", dev->name, value);
1591 PutByte(XIRCREG42_SWC0, 0x20); /* disable source insertion */
1593 if (local->silicon != 1) {
1594 /* set the local memory dividing line.
1595 * The comments in the sample code say that this is only
1596 * settable with the scipper version 2 which is revision 0.
1597 * Always for CE3 cards
1600 PutWord(XIRCREG2_RBS, 0x2000);
1606 /* Hardware workaround:
1607 * The receive byte pointer after reset is off by 1 so we need
1608 * to move the offset pointer back to 0.
1611 PutWord(XIRCREG0_DO, 0x2000); /* change offset command, off=0 */
1613 /* setup MAC IMRs and clear status registers */
1614 SelectPage(0x40); /* Bit 7 ... bit 0 */
1615 PutByte(XIRCREG40_RMASK0, 0xff); /* ROK, RAB, rsv, RO, CRC, AE, PTL, MP */
1616 PutByte(XIRCREG40_TMASK0, 0xff); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1617 PutByte(XIRCREG40_TMASK1, 0xb0); /* rsv, rsv, PTD, EXT, rsv,rsv,rsv, rsv*/
1618 PutByte(XIRCREG40_RXST0, 0x00); /* ROK, RAB, REN, RO, CRC, AE, PTL, MP */
1619 PutByte(XIRCREG40_TXST0, 0x00); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1620 PutByte(XIRCREG40_TXST1, 0x00); /* TEN, rsv, PTD, EXT, retry_counter:4 */
1622 if (full && local->mohawk && init_mii(dev)) {
1623 if (dev->if_port == 4 || local->dingo || local->new_mii) {
1624 printk(KERN_INFO "%s: MII selected\n", dev->name);
1626 PutByte(XIRCREG2_MSR, GetByte(XIRCREG2_MSR) | 0x08);
1629 printk(KERN_INFO "%s: MII detected; using 10mbs\n",
1632 if (dev->if_port == 2) /* enable 10Base2 */
1633 PutByte(XIRCREG42_SWC1, 0xC0);
1634 else /* enable 10BaseT */
1635 PutByte(XIRCREG42_SWC1, 0x80);
1636 msleep(40); /* wait 40 msec to let it complete */
1639 PutByte(XIRCREG1_ECR, GetByte(XIRCREG1_ECR | FullDuplex));
1640 } else { /* No MII */
1642 value = GetByte(XIRCREG_ESR); /* read the ESR */
1643 dev->if_port = (value & MediaSelect) ? 1 : 2;
1646 /* configure the LEDs */
1648 if (dev->if_port == 1 || dev->if_port == 4) /* TP: Link and Activity */
1649 PutByte(XIRCREG2_LED, 0x3b);
1650 else /* Coax: Not-Collision and Activity */
1651 PutByte(XIRCREG2_LED, 0x3a);
1654 PutByte(0x0b, 0x04); /* 100 Mbit LED */
1656 /* enable receiver and put the mac online */
1658 set_multicast_list(dev);
1660 PutByte(XIRCREG40_CMD0, EnableRecv | Online);
1663 /* setup Ethernet IMR and enable interrupts */
1665 PutByte(XIRCREG1_IMR0, 0xff);
1668 PutByte(XIRCREG_CR, EnableIntr);
1669 if (local->modem && !local->dingo) { /* do some magic */
1670 if (!(GetByte(0x10) & 0x01))
1671 PutByte(0x10, 0x11); /* unmask master-int bit */
1675 printk(KERN_INFO "%s: media %s, silicon revision %d\n",
1676 dev->name, if_names[dev->if_port], local->silicon);
1677 /* We should switch back to page 0 to avoid a bug in revision 0
1678 * where regs with offset below 8 can't be read after an access
1679 * to the MAC registers */
1684 * Initialize the Media-Independent-Interface
1685 * Returns: True if we have a good MII
1688 init_mii(struct net_device *dev)
1690 local_info_t *local = netdev_priv(dev);
1691 unsigned int ioaddr = dev->base_addr;
1692 unsigned control, status, linkpartner;
1695 if (if_port == 4 || if_port == 1) { /* force 100BaseT or 10BaseT */
1696 dev->if_port = if_port;
1697 local->probe_port = 0;
1701 status = mii_rd(ioaddr, 0, 1);
1702 if ((status & 0xff00) != 0x7800)
1703 return 0; /* No MII */
1705 local->new_mii = (mii_rd(ioaddr, 0, 2) != 0xffff);
1707 if (local->probe_port)
1708 control = 0x1000; /* auto neg */
1709 else if (dev->if_port == 4)
1710 control = 0x2000; /* no auto neg, 100mbs mode */
1712 control = 0x0000; /* no auto neg, 10mbs mode */
1713 mii_wr(ioaddr, 0, 0, control, 16);
1715 control = mii_rd(ioaddr, 0, 0);
1717 if (control & 0x0400) {
1718 printk(KERN_NOTICE "%s can't take PHY out of isolation mode\n",
1720 local->probe_port = 0;
1724 if (local->probe_port) {
1725 /* according to the DP83840A specs the auto negotiation process
1726 * may take up to 3.5 sec, so we use this also for our ML6692
1727 * Fixme: Better to use a timer here!
1729 for (i=0; i < 35; i++) {
1730 msleep(100); /* wait 100 msec */
1731 status = mii_rd(ioaddr, 0, 1);
1732 if ((status & 0x0020) && (status & 0x0004))
1736 if (!(status & 0x0020)) {
1737 printk(KERN_INFO "%s: autonegotiation failed;"
1738 " using 10mbs\n", dev->name);
1739 if (!local->new_mii) {
1741 mii_wr(ioaddr, 0, 0, control, 16);
1744 dev->if_port = (GetByte(XIRCREG_ESR) & MediaSelect) ? 1 : 2;
1747 linkpartner = mii_rd(ioaddr, 0, 5);
1748 printk(KERN_INFO "%s: MII link partner: %04x\n",
1749 dev->name, linkpartner);
1750 if (linkpartner & 0x0080) {
1761 do_powerdown(struct net_device *dev)
1764 unsigned int ioaddr = dev->base_addr;
1766 pr_debug("do_powerdown(%p)\n", dev);
1769 PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
1774 do_stop(struct net_device *dev)
1776 unsigned int ioaddr = dev->base_addr;
1777 local_info_t *lp = netdev_priv(dev);
1778 struct pcmcia_device *link = lp->p_dev;
1780 dev_dbg(&link->dev, "do_stop(%p)\n", dev);
1785 netif_stop_queue(dev);
1788 PutByte(XIRCREG_CR, 0); /* disable interrupts */
1790 PutByte(XIRCREG1_IMR0, 0x00); /* forbid all ints */
1792 PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
1799 static struct pcmcia_device_id xirc2ps_ids[] = {
1800 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0089, 0x110a),
1801 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0138, 0x110a),
1802 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
1803 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
1804 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
1805 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
1806 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
1807 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
1808 PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x010a),
1809 PCMCIA_DEVICE_PROD_ID13("Toshiba Information Systems", "TPCENET", 0x1b3b94fe, 0xf381c1a2),
1810 PCMCIA_DEVICE_PROD_ID13("Xircom", "CE3-10/100", 0x2e3ee845, 0x0ec0ac37),
1811 PCMCIA_DEVICE_PROD_ID13("Xircom", "PS-CE2-10", 0x2e3ee845, 0x947d9073),
1812 PCMCIA_DEVICE_PROD_ID13("Xircom", "R2E-100BTX", 0x2e3ee845, 0x2464a6e3),
1813 PCMCIA_DEVICE_PROD_ID13("Xircom", "RE-10", 0x2e3ee845, 0x3e08d609),
1814 PCMCIA_DEVICE_PROD_ID13("Xircom", "XE2000", 0x2e3ee845, 0xf7188e46),
1815 PCMCIA_DEVICE_PROD_ID12("Compaq", "Ethernet LAN Card", 0x54f7c49c, 0x9fd2f0a2),
1816 PCMCIA_DEVICE_PROD_ID12("Compaq", "Netelligent 10/100 PC Card", 0x54f7c49c, 0xefe96769),
1817 PCMCIA_DEVICE_PROD_ID12("Intel", "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16", 0x816cc815, 0x174397db),
1818 PCMCIA_DEVICE_PROD_ID12("Toshiba", "10/100 Ethernet PC Card", 0x44a09d9c, 0xb44deecf),
1819 /* also matches CFE-10 cards! */
1820 /* PCMCIA_DEVICE_MANF_CARD(0x0105, 0x010a), */
1823 MODULE_DEVICE_TABLE(pcmcia, xirc2ps_ids);
1826 static struct pcmcia_driver xirc2ps_cs_driver = {
1827 .owner = THIS_MODULE,
1829 .name = "xirc2ps_cs",
1831 .probe = xirc2ps_probe,
1832 .remove = xirc2ps_detach,
1833 .id_table = xirc2ps_ids,
1834 .suspend = xirc2ps_suspend,
1835 .resume = xirc2ps_resume,
1839 init_xirc2ps_cs(void)
1841 return pcmcia_register_driver(&xirc2ps_cs_driver);
1845 exit_xirc2ps_cs(void)
1847 pcmcia_unregister_driver(&xirc2ps_cs_driver);
1850 module_init(init_xirc2ps_cs);
1851 module_exit(exit_xirc2ps_cs);
1854 static int __init setup_xirc2ps_cs(char *str)
1856 /* if_port, full_duplex, do_sound, lockup_hack
1858 int ints[10] = { -1 };
1860 str = get_options(str, 9, ints);
1862 #define MAYBE_SET(X,Y) if (ints[0] >= Y && ints[Y] != -1) { X = ints[Y]; }
1863 MAYBE_SET(if_port, 3);
1864 MAYBE_SET(full_duplex, 4);
1865 MAYBE_SET(do_sound, 5);
1866 MAYBE_SET(lockup_hack, 6);
1872 __setup("xirc2ps_cs=", setup_xirc2ps_cs);