Pull bugzilla-8110 into release branch
[pandora-kernel.git] / drivers / net / mv643xx_eth.c
1 /*
2  * drivers/net/mv643xx_eth.c - Driver for MV643XX ethernet ports
3  * Copyright (C) 2002 Matthew Dharm <mdharm@momenco.com>
4  *
5  * Based on the 64360 driver from:
6  * Copyright (C) 2002 rabeeh@galileo.co.il
7  *
8  * Copyright (C) 2003 PMC-Sierra, Inc.,
9  *      written by Manish Lachwani
10  *
11  * Copyright (C) 2003 Ralf Baechle <ralf@linux-mips.org>
12  *
13  * Copyright (C) 2004-2006 MontaVista Software, Inc.
14  *                         Dale Farnsworth <dale@farnsworth.org>
15  *
16  * Copyright (C) 2004 Steven J. Hill <sjhill1@rockwellcollins.com>
17  *                                   <sjhill@realitydiluted.com>
18  *
19  * This program is free software; you can redistribute it and/or
20  * modify it under the terms of the GNU General Public License
21  * as published by the Free Software Foundation; either version 2
22  * of the License, or (at your option) any later version.
23  *
24  * This program is distributed in the hope that it will be useful,
25  * but WITHOUT ANY WARRANTY; without even the implied warranty of
26  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
27  * GNU General Public License for more details.
28  *
29  * You should have received a copy of the GNU General Public License
30  * along with this program; if not, write to the Free Software
31  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
32  */
33 #include <linux/init.h>
34 #include <linux/dma-mapping.h>
35 #include <linux/in.h>
36 #include <linux/ip.h>
37 #include <linux/tcp.h>
38 #include <linux/udp.h>
39 #include <linux/etherdevice.h>
40
41 #include <linux/bitops.h>
42 #include <linux/delay.h>
43 #include <linux/ethtool.h>
44 #include <linux/platform_device.h>
45
46 #include <asm/io.h>
47 #include <asm/types.h>
48 #include <asm/pgtable.h>
49 #include <asm/system.h>
50 #include <asm/delay.h>
51 #include "mv643xx_eth.h"
52
53 /* Static function declarations */
54 static void eth_port_uc_addr_get(struct net_device *dev,
55                                                 unsigned char *MacAddr);
56 static void eth_port_set_multicast_list(struct net_device *);
57 static void mv643xx_eth_port_enable_tx(unsigned int port_num,
58                                                 unsigned int queues);
59 static void mv643xx_eth_port_enable_rx(unsigned int port_num,
60                                                 unsigned int queues);
61 static unsigned int mv643xx_eth_port_disable_tx(unsigned int port_num);
62 static unsigned int mv643xx_eth_port_disable_rx(unsigned int port_num);
63 static int mv643xx_eth_open(struct net_device *);
64 static int mv643xx_eth_stop(struct net_device *);
65 static int mv643xx_eth_change_mtu(struct net_device *, int);
66 static struct net_device_stats *mv643xx_eth_get_stats(struct net_device *);
67 static void eth_port_init_mac_tables(unsigned int eth_port_num);
68 #ifdef MV643XX_NAPI
69 static int mv643xx_poll(struct net_device *dev, int *budget);
70 #endif
71 static int ethernet_phy_get(unsigned int eth_port_num);
72 static void ethernet_phy_set(unsigned int eth_port_num, int phy_addr);
73 static int ethernet_phy_detect(unsigned int eth_port_num);
74 static int mv643xx_mdio_read(struct net_device *dev, int phy_id, int location);
75 static void mv643xx_mdio_write(struct net_device *dev, int phy_id, int location, int val);
76 static int mv643xx_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
77 static const struct ethtool_ops mv643xx_ethtool_ops;
78
79 static char mv643xx_driver_name[] = "mv643xx_eth";
80 static char mv643xx_driver_version[] = "1.0";
81
82 static void __iomem *mv643xx_eth_shared_base;
83
84 /* used to protect MV643XX_ETH_SMI_REG, which is shared across ports */
85 static DEFINE_SPINLOCK(mv643xx_eth_phy_lock);
86
87 static inline u32 mv_read(int offset)
88 {
89         void __iomem *reg_base;
90
91         reg_base = mv643xx_eth_shared_base - MV643XX_ETH_SHARED_REGS;
92
93         return readl(reg_base + offset);
94 }
95
96 static inline void mv_write(int offset, u32 data)
97 {
98         void __iomem *reg_base;
99
100         reg_base = mv643xx_eth_shared_base - MV643XX_ETH_SHARED_REGS;
101         writel(data, reg_base + offset);
102 }
103
104 /*
105  * Changes MTU (maximum transfer unit) of the gigabit ethenret port
106  *
107  * Input :      pointer to ethernet interface network device structure
108  *              new mtu size
109  * Output :     0 upon success, -EINVAL upon failure
110  */
111 static int mv643xx_eth_change_mtu(struct net_device *dev, int new_mtu)
112 {
113         if ((new_mtu > 9500) || (new_mtu < 64))
114                 return -EINVAL;
115
116         dev->mtu = new_mtu;
117         /*
118          * Stop then re-open the interface. This will allocate RX skb's with
119          * the new MTU.
120          * There is a possible danger that the open will not successed, due
121          * to memory is full, which might fail the open function.
122          */
123         if (netif_running(dev)) {
124                 mv643xx_eth_stop(dev);
125                 if (mv643xx_eth_open(dev))
126                         printk(KERN_ERR
127                                 "%s: Fatal error on opening device\n",
128                                 dev->name);
129         }
130
131         return 0;
132 }
133
134 /*
135  * mv643xx_eth_rx_refill_descs
136  *
137  * Fills / refills RX queue on a certain gigabit ethernet port
138  *
139  * Input :      pointer to ethernet interface network device structure
140  * Output :     N/A
141  */
142 static void mv643xx_eth_rx_refill_descs(struct net_device *dev)
143 {
144         struct mv643xx_private *mp = netdev_priv(dev);
145         struct pkt_info pkt_info;
146         struct sk_buff *skb;
147         int unaligned;
148
149         while (mp->rx_desc_count < mp->rx_ring_size) {
150                 skb = dev_alloc_skb(ETH_RX_SKB_SIZE + dma_get_cache_alignment());
151                 if (!skb)
152                         break;
153                 mp->rx_desc_count++;
154                 unaligned = (u32)skb->data & (dma_get_cache_alignment() - 1);
155                 if (unaligned)
156                         skb_reserve(skb, dma_get_cache_alignment() - unaligned);
157                 pkt_info.cmd_sts = ETH_RX_ENABLE_INTERRUPT;
158                 pkt_info.byte_cnt = ETH_RX_SKB_SIZE;
159                 pkt_info.buf_ptr = dma_map_single(NULL, skb->data,
160                                         ETH_RX_SKB_SIZE, DMA_FROM_DEVICE);
161                 pkt_info.return_info = skb;
162                 if (eth_rx_return_buff(mp, &pkt_info) != ETH_OK) {
163                         printk(KERN_ERR
164                                 "%s: Error allocating RX Ring\n", dev->name);
165                         break;
166                 }
167                 skb_reserve(skb, ETH_HW_IP_ALIGN);
168         }
169         /*
170          * If RX ring is empty of SKB, set a timer to try allocating
171          * again at a later time.
172          */
173         if (mp->rx_desc_count == 0) {
174                 printk(KERN_INFO "%s: Rx ring is empty\n", dev->name);
175                 mp->timeout.expires = jiffies + (HZ / 10);      /* 100 mSec */
176                 add_timer(&mp->timeout);
177         }
178 }
179
180 /*
181  * mv643xx_eth_rx_refill_descs_timer_wrapper
182  *
183  * Timer routine to wake up RX queue filling task. This function is
184  * used only in case the RX queue is empty, and all alloc_skb has
185  * failed (due to out of memory event).
186  *
187  * Input :      pointer to ethernet interface network device structure
188  * Output :     N/A
189  */
190 static inline void mv643xx_eth_rx_refill_descs_timer_wrapper(unsigned long data)
191 {
192         mv643xx_eth_rx_refill_descs((struct net_device *)data);
193 }
194
195 /*
196  * mv643xx_eth_update_mac_address
197  *
198  * Update the MAC address of the port in the address table
199  *
200  * Input :      pointer to ethernet interface network device structure
201  * Output :     N/A
202  */
203 static void mv643xx_eth_update_mac_address(struct net_device *dev)
204 {
205         struct mv643xx_private *mp = netdev_priv(dev);
206         unsigned int port_num = mp->port_num;
207
208         eth_port_init_mac_tables(port_num);
209         eth_port_uc_addr_set(port_num, dev->dev_addr);
210 }
211
212 /*
213  * mv643xx_eth_set_rx_mode
214  *
215  * Change from promiscuos to regular rx mode
216  *
217  * Input :      pointer to ethernet interface network device structure
218  * Output :     N/A
219  */
220 static void mv643xx_eth_set_rx_mode(struct net_device *dev)
221 {
222         struct mv643xx_private *mp = netdev_priv(dev);
223         u32 config_reg;
224
225         config_reg = mv_read(MV643XX_ETH_PORT_CONFIG_REG(mp->port_num));
226         if (dev->flags & IFF_PROMISC)
227                 config_reg |= (u32) MV643XX_ETH_UNICAST_PROMISCUOUS_MODE;
228         else
229                 config_reg &= ~(u32) MV643XX_ETH_UNICAST_PROMISCUOUS_MODE;
230         mv_write(MV643XX_ETH_PORT_CONFIG_REG(mp->port_num), config_reg);
231
232         eth_port_set_multicast_list(dev);
233 }
234
235 /*
236  * mv643xx_eth_set_mac_address
237  *
238  * Change the interface's mac address.
239  * No special hardware thing should be done because interface is always
240  * put in promiscuous mode.
241  *
242  * Input :      pointer to ethernet interface network device structure and
243  *              a pointer to the designated entry to be added to the cache.
244  * Output :     zero upon success, negative upon failure
245  */
246 static int mv643xx_eth_set_mac_address(struct net_device *dev, void *addr)
247 {
248         int i;
249
250         for (i = 0; i < 6; i++)
251                 /* +2 is for the offset of the HW addr type */
252                 dev->dev_addr[i] = ((unsigned char *)addr)[i + 2];
253         mv643xx_eth_update_mac_address(dev);
254         return 0;
255 }
256
257 /*
258  * mv643xx_eth_tx_timeout
259  *
260  * Called upon a timeout on transmitting a packet
261  *
262  * Input :      pointer to ethernet interface network device structure.
263  * Output :     N/A
264  */
265 static void mv643xx_eth_tx_timeout(struct net_device *dev)
266 {
267         struct mv643xx_private *mp = netdev_priv(dev);
268
269         printk(KERN_INFO "%s: TX timeout  ", dev->name);
270
271         /* Do the reset outside of interrupt context */
272         schedule_work(&mp->tx_timeout_task);
273 }
274
275 /*
276  * mv643xx_eth_tx_timeout_task
277  *
278  * Actual routine to reset the adapter when a timeout on Tx has occurred
279  */
280 static void mv643xx_eth_tx_timeout_task(struct work_struct *ugly)
281 {
282         struct mv643xx_private *mp = container_of(ugly, struct mv643xx_private,
283                                                   tx_timeout_task);
284         struct net_device *dev = mp->mii.dev; /* yuck */
285
286         if (!netif_running(dev))
287                 return;
288
289         netif_stop_queue(dev);
290
291         eth_port_reset(mp->port_num);
292         eth_port_start(dev);
293
294         if (mp->tx_ring_size - mp->tx_desc_count >= MAX_DESCS_PER_SKB)
295                 netif_wake_queue(dev);
296 }
297
298 /**
299  * mv643xx_eth_free_tx_descs - Free the tx desc data for completed descriptors
300  *
301  * If force is non-zero, frees uncompleted descriptors as well
302  */
303 int mv643xx_eth_free_tx_descs(struct net_device *dev, int force)
304 {
305         struct mv643xx_private *mp = netdev_priv(dev);
306         struct eth_tx_desc *desc;
307         u32 cmd_sts;
308         struct sk_buff *skb;
309         unsigned long flags;
310         int tx_index;
311         dma_addr_t addr;
312         int count;
313         int released = 0;
314
315         while (mp->tx_desc_count > 0) {
316                 spin_lock_irqsave(&mp->lock, flags);
317
318                 /* tx_desc_count might have changed before acquiring the lock */
319                 if (mp->tx_desc_count <= 0) {
320                         spin_unlock_irqrestore(&mp->lock, flags);
321                         return released;
322                 }
323
324                 tx_index = mp->tx_used_desc_q;
325                 desc = &mp->p_tx_desc_area[tx_index];
326                 cmd_sts = desc->cmd_sts;
327
328                 if (!force && (cmd_sts & ETH_BUFFER_OWNED_BY_DMA)) {
329                         spin_unlock_irqrestore(&mp->lock, flags);
330                         return released;
331                 }
332
333                 mp->tx_used_desc_q = (tx_index + 1) % mp->tx_ring_size;
334                 mp->tx_desc_count--;
335
336                 addr = desc->buf_ptr;
337                 count = desc->byte_cnt;
338                 skb = mp->tx_skb[tx_index];
339                 if (skb)
340                         mp->tx_skb[tx_index] = NULL;
341
342                 if (cmd_sts & ETH_ERROR_SUMMARY) {
343                         printk("%s: Error in TX\n", dev->name);
344                         mp->stats.tx_errors++;
345                 }
346
347                 spin_unlock_irqrestore(&mp->lock, flags);
348
349                 if (cmd_sts & ETH_TX_FIRST_DESC)
350                         dma_unmap_single(NULL, addr, count, DMA_TO_DEVICE);
351                 else
352                         dma_unmap_page(NULL, addr, count, DMA_TO_DEVICE);
353
354                 if (skb)
355                         dev_kfree_skb_irq(skb);
356
357                 released = 1;
358         }
359
360         return released;
361 }
362
363 static void mv643xx_eth_free_completed_tx_descs(struct net_device *dev)
364 {
365         struct mv643xx_private *mp = netdev_priv(dev);
366
367         if (mv643xx_eth_free_tx_descs(dev, 0) &&
368             mp->tx_ring_size - mp->tx_desc_count >= MAX_DESCS_PER_SKB)
369                 netif_wake_queue(dev);
370 }
371
372 static void mv643xx_eth_free_all_tx_descs(struct net_device *dev)
373 {
374         mv643xx_eth_free_tx_descs(dev, 1);
375 }
376
377 /*
378  * mv643xx_eth_receive
379  *
380  * This function is forward packets that are received from the port's
381  * queues toward kernel core or FastRoute them to another interface.
382  *
383  * Input :      dev - a pointer to the required interface
384  *              max - maximum number to receive (0 means unlimted)
385  *
386  * Output :     number of served packets
387  */
388 static int mv643xx_eth_receive_queue(struct net_device *dev, int budget)
389 {
390         struct mv643xx_private *mp = netdev_priv(dev);
391         struct net_device_stats *stats = &mp->stats;
392         unsigned int received_packets = 0;
393         struct sk_buff *skb;
394         struct pkt_info pkt_info;
395
396         while (budget-- > 0 && eth_port_receive(mp, &pkt_info) == ETH_OK) {
397                 dma_unmap_single(NULL, pkt_info.buf_ptr, ETH_RX_SKB_SIZE,
398                                                         DMA_FROM_DEVICE);
399                 mp->rx_desc_count--;
400                 received_packets++;
401
402                 /*
403                  * Update statistics.
404                  * Note byte count includes 4 byte CRC count
405                  */
406                 stats->rx_packets++;
407                 stats->rx_bytes += pkt_info.byte_cnt;
408                 skb = pkt_info.return_info;
409                 /*
410                  * In case received a packet without first / last bits on OR
411                  * the error summary bit is on, the packets needs to be dropeed.
412                  */
413                 if (((pkt_info.cmd_sts
414                                 & (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) !=
415                                         (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC))
416                                 || (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)) {
417                         stats->rx_dropped++;
418                         if ((pkt_info.cmd_sts & (ETH_RX_FIRST_DESC |
419                                                         ETH_RX_LAST_DESC)) !=
420                                 (ETH_RX_FIRST_DESC | ETH_RX_LAST_DESC)) {
421                                 if (net_ratelimit())
422                                         printk(KERN_ERR
423                                                 "%s: Received packet spread "
424                                                 "on multiple descriptors\n",
425                                                 dev->name);
426                         }
427                         if (pkt_info.cmd_sts & ETH_ERROR_SUMMARY)
428                                 stats->rx_errors++;
429
430                         dev_kfree_skb_irq(skb);
431                 } else {
432                         /*
433                          * The -4 is for the CRC in the trailer of the
434                          * received packet
435                          */
436                         skb_put(skb, pkt_info.byte_cnt - 4);
437                         skb->dev = dev;
438
439                         if (pkt_info.cmd_sts & ETH_LAYER_4_CHECKSUM_OK) {
440                                 skb->ip_summed = CHECKSUM_UNNECESSARY;
441                                 skb->csum = htons(
442                                         (pkt_info.cmd_sts & 0x0007fff8) >> 3);
443                         }
444                         skb->protocol = eth_type_trans(skb, dev);
445 #ifdef MV643XX_NAPI
446                         netif_receive_skb(skb);
447 #else
448                         netif_rx(skb);
449 #endif
450                 }
451                 dev->last_rx = jiffies;
452         }
453         mv643xx_eth_rx_refill_descs(dev);       /* Fill RX ring with skb's */
454
455         return received_packets;
456 }
457
458 /* Set the mv643xx port configuration register for the speed/duplex mode. */
459 static void mv643xx_eth_update_pscr(struct net_device *dev,
460                                     struct ethtool_cmd *ecmd)
461 {
462         struct mv643xx_private *mp = netdev_priv(dev);
463         int port_num = mp->port_num;
464         u32 o_pscr, n_pscr;
465         unsigned int queues;
466
467         o_pscr = mv_read(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num));
468         n_pscr = o_pscr;
469
470         /* clear speed, duplex and rx buffer size fields */
471         n_pscr &= ~(MV643XX_ETH_SET_MII_SPEED_TO_100  |
472                    MV643XX_ETH_SET_GMII_SPEED_TO_1000 |
473                    MV643XX_ETH_SET_FULL_DUPLEX_MODE   |
474                    MV643XX_ETH_MAX_RX_PACKET_MASK);
475
476         if (ecmd->duplex == DUPLEX_FULL)
477                 n_pscr |= MV643XX_ETH_SET_FULL_DUPLEX_MODE;
478
479         if (ecmd->speed == SPEED_1000)
480                 n_pscr |= MV643XX_ETH_SET_GMII_SPEED_TO_1000 |
481                           MV643XX_ETH_MAX_RX_PACKET_9700BYTE;
482         else {
483                 if (ecmd->speed == SPEED_100)
484                         n_pscr |= MV643XX_ETH_SET_MII_SPEED_TO_100;
485                 n_pscr |= MV643XX_ETH_MAX_RX_PACKET_1522BYTE;
486         }
487
488         if (n_pscr != o_pscr) {
489                 if ((o_pscr & MV643XX_ETH_SERIAL_PORT_ENABLE) == 0)
490                         mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
491                                                                 n_pscr);
492                 else {
493                         queues = mv643xx_eth_port_disable_tx(port_num);
494
495                         o_pscr &= ~MV643XX_ETH_SERIAL_PORT_ENABLE;
496                         mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
497                                                                 o_pscr);
498                         mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
499                                                                 n_pscr);
500                         mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num),
501                                                                 n_pscr);
502                         if (queues)
503                                 mv643xx_eth_port_enable_tx(port_num, queues);
504                 }
505         }
506 }
507
508 /*
509  * mv643xx_eth_int_handler
510  *
511  * Main interrupt handler for the gigbit ethernet ports
512  *
513  * Input :      irq     - irq number (not used)
514  *              dev_id  - a pointer to the required interface's data structure
515  *              regs    - not used
516  * Output :     N/A
517  */
518
519 static irqreturn_t mv643xx_eth_int_handler(int irq, void *dev_id)
520 {
521         struct net_device *dev = (struct net_device *)dev_id;
522         struct mv643xx_private *mp = netdev_priv(dev);
523         u32 eth_int_cause, eth_int_cause_ext = 0;
524         unsigned int port_num = mp->port_num;
525
526         /* Read interrupt cause registers */
527         eth_int_cause = mv_read(MV643XX_ETH_INTERRUPT_CAUSE_REG(port_num)) &
528                                                 ETH_INT_UNMASK_ALL;
529         if (eth_int_cause & ETH_INT_CAUSE_EXT) {
530                 eth_int_cause_ext = mv_read(
531                         MV643XX_ETH_INTERRUPT_CAUSE_EXTEND_REG(port_num)) &
532                                                 ETH_INT_UNMASK_ALL_EXT;
533                 mv_write(MV643XX_ETH_INTERRUPT_CAUSE_EXTEND_REG(port_num),
534                                                         ~eth_int_cause_ext);
535         }
536
537         /* PHY status changed */
538         if (eth_int_cause_ext & ETH_INT_CAUSE_PHY) {
539                 struct ethtool_cmd cmd;
540
541                 if (mii_link_ok(&mp->mii)) {
542                         mii_ethtool_gset(&mp->mii, &cmd);
543                         mv643xx_eth_update_pscr(dev, &cmd);
544                         mv643xx_eth_port_enable_tx(port_num,
545                                                    ETH_TX_QUEUES_ENABLED);
546                         if (!netif_carrier_ok(dev)) {
547                                 netif_carrier_on(dev);
548                                 if (mp->tx_ring_size - mp->tx_desc_count >=
549                                                         MAX_DESCS_PER_SKB)
550                                         netif_wake_queue(dev);
551                         }
552                 } else if (netif_carrier_ok(dev)) {
553                         netif_stop_queue(dev);
554                         netif_carrier_off(dev);
555                 }
556         }
557
558 #ifdef MV643XX_NAPI
559         if (eth_int_cause & ETH_INT_CAUSE_RX) {
560                 /* schedule the NAPI poll routine to maintain port */
561                 mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num),
562                                                         ETH_INT_MASK_ALL);
563                 /* wait for previous write to complete */
564                 mv_read(MV643XX_ETH_INTERRUPT_MASK_REG(port_num));
565
566                 netif_rx_schedule(dev);
567         }
568 #else
569         if (eth_int_cause & ETH_INT_CAUSE_RX)
570                 mv643xx_eth_receive_queue(dev, INT_MAX);
571 #endif
572         if (eth_int_cause_ext & ETH_INT_CAUSE_TX)
573                 mv643xx_eth_free_completed_tx_descs(dev);
574
575         /*
576          * If no real interrupt occured, exit.
577          * This can happen when using gigE interrupt coalescing mechanism.
578          */
579         if ((eth_int_cause == 0x0) && (eth_int_cause_ext == 0x0))
580                 return IRQ_NONE;
581
582         return IRQ_HANDLED;
583 }
584
585 #ifdef MV643XX_COAL
586
587 /*
588  * eth_port_set_rx_coal - Sets coalescing interrupt mechanism on RX path
589  *
590  * DESCRIPTION:
591  *      This routine sets the RX coalescing interrupt mechanism parameter.
592  *      This parameter is a timeout counter, that counts in 64 t_clk
593  *      chunks ; that when timeout event occurs a maskable interrupt
594  *      occurs.
595  *      The parameter is calculated using the tClk of the MV-643xx chip
596  *      , and the required delay of the interrupt in usec.
597  *
598  * INPUT:
599  *      unsigned int eth_port_num       Ethernet port number
600  *      unsigned int t_clk              t_clk of the MV-643xx chip in HZ units
601  *      unsigned int delay              Delay in usec
602  *
603  * OUTPUT:
604  *      Interrupt coalescing mechanism value is set in MV-643xx chip.
605  *
606  * RETURN:
607  *      The interrupt coalescing value set in the gigE port.
608  *
609  */
610 static unsigned int eth_port_set_rx_coal(unsigned int eth_port_num,
611                                         unsigned int t_clk, unsigned int delay)
612 {
613         unsigned int coal = ((t_clk / 1000000) * delay) / 64;
614
615         /* Set RX Coalescing mechanism */
616         mv_write(MV643XX_ETH_SDMA_CONFIG_REG(eth_port_num),
617                 ((coal & 0x3fff) << 8) |
618                 (mv_read(MV643XX_ETH_SDMA_CONFIG_REG(eth_port_num))
619                         & 0xffc000ff));
620
621         return coal;
622 }
623 #endif
624
625 /*
626  * eth_port_set_tx_coal - Sets coalescing interrupt mechanism on TX path
627  *
628  * DESCRIPTION:
629  *      This routine sets the TX coalescing interrupt mechanism parameter.
630  *      This parameter is a timeout counter, that counts in 64 t_clk
631  *      chunks ; that when timeout event occurs a maskable interrupt
632  *      occurs.
633  *      The parameter is calculated using the t_cLK frequency of the
634  *      MV-643xx chip and the required delay in the interrupt in uSec
635  *
636  * INPUT:
637  *      unsigned int eth_port_num       Ethernet port number
638  *      unsigned int t_clk              t_clk of the MV-643xx chip in HZ units
639  *      unsigned int delay              Delay in uSeconds
640  *
641  * OUTPUT:
642  *      Interrupt coalescing mechanism value is set in MV-643xx chip.
643  *
644  * RETURN:
645  *      The interrupt coalescing value set in the gigE port.
646  *
647  */
648 static unsigned int eth_port_set_tx_coal(unsigned int eth_port_num,
649                                         unsigned int t_clk, unsigned int delay)
650 {
651         unsigned int coal;
652         coal = ((t_clk / 1000000) * delay) / 64;
653         /* Set TX Coalescing mechanism */
654         mv_write(MV643XX_ETH_TX_FIFO_URGENT_THRESHOLD_REG(eth_port_num),
655                                                                 coal << 4);
656         return coal;
657 }
658
659 /*
660  * ether_init_rx_desc_ring - Curve a Rx chain desc list and buffer in memory.
661  *
662  * DESCRIPTION:
663  *      This function prepares a Rx chained list of descriptors and packet
664  *      buffers in a form of a ring. The routine must be called after port
665  *      initialization routine and before port start routine.
666  *      The Ethernet SDMA engine uses CPU bus addresses to access the various
667  *      devices in the system (i.e. DRAM). This function uses the ethernet
668  *      struct 'virtual to physical' routine (set by the user) to set the ring
669  *      with physical addresses.
670  *
671  * INPUT:
672  *      struct mv643xx_private *mp      Ethernet Port Control srtuct.
673  *
674  * OUTPUT:
675  *      The routine updates the Ethernet port control struct with information
676  *      regarding the Rx descriptors and buffers.
677  *
678  * RETURN:
679  *      None.
680  */
681 static void ether_init_rx_desc_ring(struct mv643xx_private *mp)
682 {
683         volatile struct eth_rx_desc *p_rx_desc;
684         int rx_desc_num = mp->rx_ring_size;
685         int i;
686
687         /* initialize the next_desc_ptr links in the Rx descriptors ring */
688         p_rx_desc = (struct eth_rx_desc *)mp->p_rx_desc_area;
689         for (i = 0; i < rx_desc_num; i++) {
690                 p_rx_desc[i].next_desc_ptr = mp->rx_desc_dma +
691                         ((i + 1) % rx_desc_num) * sizeof(struct eth_rx_desc);
692         }
693
694         /* Save Rx desc pointer to driver struct. */
695         mp->rx_curr_desc_q = 0;
696         mp->rx_used_desc_q = 0;
697
698         mp->rx_desc_area_size = rx_desc_num * sizeof(struct eth_rx_desc);
699 }
700
701 /*
702  * ether_init_tx_desc_ring - Curve a Tx chain desc list and buffer in memory.
703  *
704  * DESCRIPTION:
705  *      This function prepares a Tx chained list of descriptors and packet
706  *      buffers in a form of a ring. The routine must be called after port
707  *      initialization routine and before port start routine.
708  *      The Ethernet SDMA engine uses CPU bus addresses to access the various
709  *      devices in the system (i.e. DRAM). This function uses the ethernet
710  *      struct 'virtual to physical' routine (set by the user) to set the ring
711  *      with physical addresses.
712  *
713  * INPUT:
714  *      struct mv643xx_private *mp      Ethernet Port Control srtuct.
715  *
716  * OUTPUT:
717  *      The routine updates the Ethernet port control struct with information
718  *      regarding the Tx descriptors and buffers.
719  *
720  * RETURN:
721  *      None.
722  */
723 static void ether_init_tx_desc_ring(struct mv643xx_private *mp)
724 {
725         int tx_desc_num = mp->tx_ring_size;
726         struct eth_tx_desc *p_tx_desc;
727         int i;
728
729         /* Initialize the next_desc_ptr links in the Tx descriptors ring */
730         p_tx_desc = (struct eth_tx_desc *)mp->p_tx_desc_area;
731         for (i = 0; i < tx_desc_num; i++) {
732                 p_tx_desc[i].next_desc_ptr = mp->tx_desc_dma +
733                         ((i + 1) % tx_desc_num) * sizeof(struct eth_tx_desc);
734         }
735
736         mp->tx_curr_desc_q = 0;
737         mp->tx_used_desc_q = 0;
738
739         mp->tx_desc_area_size = tx_desc_num * sizeof(struct eth_tx_desc);
740 }
741
742 static int mv643xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
743 {
744         struct mv643xx_private *mp = netdev_priv(dev);
745         int err;
746
747         spin_lock_irq(&mp->lock);
748         err = mii_ethtool_sset(&mp->mii, cmd);
749         spin_unlock_irq(&mp->lock);
750
751         return err;
752 }
753
754 static int mv643xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
755 {
756         struct mv643xx_private *mp = netdev_priv(dev);
757         int err;
758
759         spin_lock_irq(&mp->lock);
760         err = mii_ethtool_gset(&mp->mii, cmd);
761         spin_unlock_irq(&mp->lock);
762
763         /* The PHY may support 1000baseT_Half, but the mv643xx does not */
764         cmd->supported &= ~SUPPORTED_1000baseT_Half;
765         cmd->advertising &= ~ADVERTISED_1000baseT_Half;
766
767         return err;
768 }
769
770 /*
771  * mv643xx_eth_open
772  *
773  * This function is called when openning the network device. The function
774  * should initialize all the hardware, initialize cyclic Rx/Tx
775  * descriptors chain and buffers and allocate an IRQ to the network
776  * device.
777  *
778  * Input :      a pointer to the network device structure
779  *
780  * Output :     zero of success , nonzero if fails.
781  */
782
783 static int mv643xx_eth_open(struct net_device *dev)
784 {
785         struct mv643xx_private *mp = netdev_priv(dev);
786         unsigned int port_num = mp->port_num;
787         unsigned int size;
788         int err;
789
790         /* Clear any pending ethernet port interrupts */
791         mv_write(MV643XX_ETH_INTERRUPT_CAUSE_REG(port_num), 0);
792         mv_write(MV643XX_ETH_INTERRUPT_CAUSE_EXTEND_REG(port_num), 0);
793         /* wait for previous write to complete */
794         mv_read (MV643XX_ETH_INTERRUPT_CAUSE_EXTEND_REG(port_num));
795
796         err = request_irq(dev->irq, mv643xx_eth_int_handler,
797                         IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev);
798         if (err) {
799                 printk(KERN_ERR "Can not assign IRQ number to MV643XX_eth%d\n",
800                                                                 port_num);
801                 return -EAGAIN;
802         }
803
804         eth_port_init(mp);
805
806         memset(&mp->timeout, 0, sizeof(struct timer_list));
807         mp->timeout.function = mv643xx_eth_rx_refill_descs_timer_wrapper;
808         mp->timeout.data = (unsigned long)dev;
809
810         /* Allocate RX and TX skb rings */
811         mp->rx_skb = kmalloc(sizeof(*mp->rx_skb) * mp->rx_ring_size,
812                                                                 GFP_KERNEL);
813         if (!mp->rx_skb) {
814                 printk(KERN_ERR "%s: Cannot allocate Rx skb ring\n", dev->name);
815                 err = -ENOMEM;
816                 goto out_free_irq;
817         }
818         mp->tx_skb = kmalloc(sizeof(*mp->tx_skb) * mp->tx_ring_size,
819                                                                 GFP_KERNEL);
820         if (!mp->tx_skb) {
821                 printk(KERN_ERR "%s: Cannot allocate Tx skb ring\n", dev->name);
822                 err = -ENOMEM;
823                 goto out_free_rx_skb;
824         }
825
826         /* Allocate TX ring */
827         mp->tx_desc_count = 0;
828         size = mp->tx_ring_size * sizeof(struct eth_tx_desc);
829         mp->tx_desc_area_size = size;
830
831         if (mp->tx_sram_size) {
832                 mp->p_tx_desc_area = ioremap(mp->tx_sram_addr,
833                                                         mp->tx_sram_size);
834                 mp->tx_desc_dma = mp->tx_sram_addr;
835         } else
836                 mp->p_tx_desc_area = dma_alloc_coherent(NULL, size,
837                                                         &mp->tx_desc_dma,
838                                                         GFP_KERNEL);
839
840         if (!mp->p_tx_desc_area) {
841                 printk(KERN_ERR "%s: Cannot allocate Tx Ring (size %d bytes)\n",
842                                                         dev->name, size);
843                 err = -ENOMEM;
844                 goto out_free_tx_skb;
845         }
846         BUG_ON((u32) mp->p_tx_desc_area & 0xf); /* check 16-byte alignment */
847         memset((void *)mp->p_tx_desc_area, 0, mp->tx_desc_area_size);
848
849         ether_init_tx_desc_ring(mp);
850
851         /* Allocate RX ring */
852         mp->rx_desc_count = 0;
853         size = mp->rx_ring_size * sizeof(struct eth_rx_desc);
854         mp->rx_desc_area_size = size;
855
856         if (mp->rx_sram_size) {
857                 mp->p_rx_desc_area = ioremap(mp->rx_sram_addr,
858                                                         mp->rx_sram_size);
859                 mp->rx_desc_dma = mp->rx_sram_addr;
860         } else
861                 mp->p_rx_desc_area = dma_alloc_coherent(NULL, size,
862                                                         &mp->rx_desc_dma,
863                                                         GFP_KERNEL);
864
865         if (!mp->p_rx_desc_area) {
866                 printk(KERN_ERR "%s: Cannot allocate Rx ring (size %d bytes)\n",
867                                                         dev->name, size);
868                 printk(KERN_ERR "%s: Freeing previously allocated TX queues...",
869                                                         dev->name);
870                 if (mp->rx_sram_size)
871                         iounmap(mp->p_tx_desc_area);
872                 else
873                         dma_free_coherent(NULL, mp->tx_desc_area_size,
874                                         mp->p_tx_desc_area, mp->tx_desc_dma);
875                 err = -ENOMEM;
876                 goto out_free_tx_skb;
877         }
878         memset((void *)mp->p_rx_desc_area, 0, size);
879
880         ether_init_rx_desc_ring(mp);
881
882         mv643xx_eth_rx_refill_descs(dev);       /* Fill RX ring with skb's */
883
884         eth_port_start(dev);
885
886         /* Interrupt Coalescing */
887
888 #ifdef MV643XX_COAL
889         mp->rx_int_coal =
890                 eth_port_set_rx_coal(port_num, 133000000, MV643XX_RX_COAL);
891 #endif
892
893         mp->tx_int_coal =
894                 eth_port_set_tx_coal(port_num, 133000000, MV643XX_TX_COAL);
895
896         /* Unmask phy and link status changes interrupts */
897         mv_write(MV643XX_ETH_INTERRUPT_EXTEND_MASK_REG(port_num),
898                                                 ETH_INT_UNMASK_ALL_EXT);
899
900         /* Unmask RX buffer and TX end interrupt */
901         mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num), ETH_INT_UNMASK_ALL);
902
903         return 0;
904
905 out_free_tx_skb:
906         kfree(mp->tx_skb);
907 out_free_rx_skb:
908         kfree(mp->rx_skb);
909 out_free_irq:
910         free_irq(dev->irq, dev);
911
912         return err;
913 }
914
915 static void mv643xx_eth_free_tx_rings(struct net_device *dev)
916 {
917         struct mv643xx_private *mp = netdev_priv(dev);
918
919         /* Stop Tx Queues */
920         mv643xx_eth_port_disable_tx(mp->port_num);
921
922         /* Free outstanding skb's on TX ring */
923         mv643xx_eth_free_all_tx_descs(dev);
924
925         BUG_ON(mp->tx_used_desc_q != mp->tx_curr_desc_q);
926
927         /* Free TX ring */
928         if (mp->tx_sram_size)
929                 iounmap(mp->p_tx_desc_area);
930         else
931                 dma_free_coherent(NULL, mp->tx_desc_area_size,
932                                 mp->p_tx_desc_area, mp->tx_desc_dma);
933 }
934
935 static void mv643xx_eth_free_rx_rings(struct net_device *dev)
936 {
937         struct mv643xx_private *mp = netdev_priv(dev);
938         unsigned int port_num = mp->port_num;
939         int curr;
940
941         /* Stop RX Queues */
942         mv643xx_eth_port_disable_rx(port_num);
943
944         /* Free preallocated skb's on RX rings */
945         for (curr = 0; mp->rx_desc_count && curr < mp->rx_ring_size; curr++) {
946                 if (mp->rx_skb[curr]) {
947                         dev_kfree_skb(mp->rx_skb[curr]);
948                         mp->rx_desc_count--;
949                 }
950         }
951
952         if (mp->rx_desc_count)
953                 printk(KERN_ERR
954                         "%s: Error in freeing Rx Ring. %d skb's still"
955                         " stuck in RX Ring - ignoring them\n", dev->name,
956                         mp->rx_desc_count);
957         /* Free RX ring */
958         if (mp->rx_sram_size)
959                 iounmap(mp->p_rx_desc_area);
960         else
961                 dma_free_coherent(NULL, mp->rx_desc_area_size,
962                                 mp->p_rx_desc_area, mp->rx_desc_dma);
963 }
964
965 /*
966  * mv643xx_eth_stop
967  *
968  * This function is used when closing the network device.
969  * It updates the hardware,
970  * release all memory that holds buffers and descriptors and release the IRQ.
971  * Input :      a pointer to the device structure
972  * Output :     zero if success , nonzero if fails
973  */
974
975 static int mv643xx_eth_stop(struct net_device *dev)
976 {
977         struct mv643xx_private *mp = netdev_priv(dev);
978         unsigned int port_num = mp->port_num;
979
980         /* Mask all interrupts on ethernet port */
981         mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num), ETH_INT_MASK_ALL);
982         /* wait for previous write to complete */
983         mv_read(MV643XX_ETH_INTERRUPT_MASK_REG(port_num));
984
985 #ifdef MV643XX_NAPI
986         netif_poll_disable(dev);
987 #endif
988         netif_carrier_off(dev);
989         netif_stop_queue(dev);
990
991         eth_port_reset(mp->port_num);
992
993         mv643xx_eth_free_tx_rings(dev);
994         mv643xx_eth_free_rx_rings(dev);
995
996 #ifdef MV643XX_NAPI
997         netif_poll_enable(dev);
998 #endif
999
1000         free_irq(dev->irq, dev);
1001
1002         return 0;
1003 }
1004
1005 #ifdef MV643XX_NAPI
1006 /*
1007  * mv643xx_poll
1008  *
1009  * This function is used in case of NAPI
1010  */
1011 static int mv643xx_poll(struct net_device *dev, int *budget)
1012 {
1013         struct mv643xx_private *mp = netdev_priv(dev);
1014         int done = 1, orig_budget, work_done;
1015         unsigned int port_num = mp->port_num;
1016
1017 #ifdef MV643XX_TX_FAST_REFILL
1018         if (++mp->tx_clean_threshold > 5) {
1019                 mv643xx_eth_free_completed_tx_descs(dev);
1020                 mp->tx_clean_threshold = 0;
1021         }
1022 #endif
1023
1024         if ((mv_read(MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port_num)))
1025                                                 != (u32) mp->rx_used_desc_q) {
1026                 orig_budget = *budget;
1027                 if (orig_budget > dev->quota)
1028                         orig_budget = dev->quota;
1029                 work_done = mv643xx_eth_receive_queue(dev, orig_budget);
1030                 *budget -= work_done;
1031                 dev->quota -= work_done;
1032                 if (work_done >= orig_budget)
1033                         done = 0;
1034         }
1035
1036         if (done) {
1037                 netif_rx_complete(dev);
1038                 mv_write(MV643XX_ETH_INTERRUPT_CAUSE_REG(port_num), 0);
1039                 mv_write(MV643XX_ETH_INTERRUPT_CAUSE_EXTEND_REG(port_num), 0);
1040                 mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num),
1041                                                 ETH_INT_UNMASK_ALL);
1042         }
1043
1044         return done ? 0 : 1;
1045 }
1046 #endif
1047
1048 /**
1049  * has_tiny_unaligned_frags - check if skb has any small, unaligned fragments
1050  *
1051  * Hardware can't handle unaligned fragments smaller than 9 bytes.
1052  * This helper function detects that case.
1053  */
1054
1055 static inline unsigned int has_tiny_unaligned_frags(struct sk_buff *skb)
1056 {
1057         unsigned int frag;
1058         skb_frag_t *fragp;
1059
1060         for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
1061                 fragp = &skb_shinfo(skb)->frags[frag];
1062                 if (fragp->size <= 8 && fragp->page_offset & 0x7)
1063                         return 1;
1064         }
1065         return 0;
1066 }
1067
1068 /**
1069  * eth_alloc_tx_desc_index - return the index of the next available tx desc
1070  */
1071 static int eth_alloc_tx_desc_index(struct mv643xx_private *mp)
1072 {
1073         int tx_desc_curr;
1074
1075         BUG_ON(mp->tx_desc_count >= mp->tx_ring_size);
1076
1077         tx_desc_curr = mp->tx_curr_desc_q;
1078         mp->tx_curr_desc_q = (tx_desc_curr + 1) % mp->tx_ring_size;
1079
1080         BUG_ON(mp->tx_curr_desc_q == mp->tx_used_desc_q);
1081
1082         return tx_desc_curr;
1083 }
1084
1085 /**
1086  * eth_tx_fill_frag_descs - fill tx hw descriptors for an skb's fragments.
1087  *
1088  * Ensure the data for each fragment to be transmitted is mapped properly,
1089  * then fill in descriptors in the tx hw queue.
1090  */
1091 static void eth_tx_fill_frag_descs(struct mv643xx_private *mp,
1092                                    struct sk_buff *skb)
1093 {
1094         int frag;
1095         int tx_index;
1096         struct eth_tx_desc *desc;
1097
1098         for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
1099                 skb_frag_t *this_frag = &skb_shinfo(skb)->frags[frag];
1100
1101                 tx_index = eth_alloc_tx_desc_index(mp);
1102                 desc = &mp->p_tx_desc_area[tx_index];
1103
1104                 desc->cmd_sts = ETH_BUFFER_OWNED_BY_DMA;
1105                 /* Last Frag enables interrupt and frees the skb */
1106                 if (frag == (skb_shinfo(skb)->nr_frags - 1)) {
1107                         desc->cmd_sts |= ETH_ZERO_PADDING |
1108                                          ETH_TX_LAST_DESC |
1109                                          ETH_TX_ENABLE_INTERRUPT;
1110                         mp->tx_skb[tx_index] = skb;
1111                 } else
1112                         mp->tx_skb[tx_index] = NULL;
1113
1114                 desc = &mp->p_tx_desc_area[tx_index];
1115                 desc->l4i_chk = 0;
1116                 desc->byte_cnt = this_frag->size;
1117                 desc->buf_ptr = dma_map_page(NULL, this_frag->page,
1118                                                 this_frag->page_offset,
1119                                                 this_frag->size,
1120                                                 DMA_TO_DEVICE);
1121         }
1122 }
1123
1124 /**
1125  * eth_tx_submit_descs_for_skb - submit data from an skb to the tx hw
1126  *
1127  * Ensure the data for an skb to be transmitted is mapped properly,
1128  * then fill in descriptors in the tx hw queue and start the hardware.
1129  */
1130 static void eth_tx_submit_descs_for_skb(struct mv643xx_private *mp,
1131                                         struct sk_buff *skb)
1132 {
1133         int tx_index;
1134         struct eth_tx_desc *desc;
1135         u32 cmd_sts;
1136         int length;
1137         int nr_frags = skb_shinfo(skb)->nr_frags;
1138
1139         cmd_sts = ETH_TX_FIRST_DESC | ETH_GEN_CRC | ETH_BUFFER_OWNED_BY_DMA;
1140
1141         tx_index = eth_alloc_tx_desc_index(mp);
1142         desc = &mp->p_tx_desc_area[tx_index];
1143
1144         if (nr_frags) {
1145                 eth_tx_fill_frag_descs(mp, skb);
1146
1147                 length = skb_headlen(skb);
1148                 mp->tx_skb[tx_index] = NULL;
1149         } else {
1150                 cmd_sts |= ETH_ZERO_PADDING |
1151                            ETH_TX_LAST_DESC |
1152                            ETH_TX_ENABLE_INTERRUPT;
1153                 length = skb->len;
1154                 mp->tx_skb[tx_index] = skb;
1155         }
1156
1157         desc->byte_cnt = length;
1158         desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE);
1159
1160         if (skb->ip_summed == CHECKSUM_PARTIAL) {
1161                 BUG_ON(skb->protocol != ETH_P_IP);
1162
1163                 cmd_sts |= ETH_GEN_TCP_UDP_CHECKSUM |
1164                            ETH_GEN_IP_V_4_CHECKSUM  |
1165                            skb->nh.iph->ihl << ETH_TX_IHL_SHIFT;
1166
1167                 switch (skb->nh.iph->protocol) {
1168                 case IPPROTO_UDP:
1169                         cmd_sts |= ETH_UDP_FRAME;
1170                         desc->l4i_chk = skb->h.uh->check;
1171                         break;
1172                 case IPPROTO_TCP:
1173                         desc->l4i_chk = skb->h.th->check;
1174                         break;
1175                 default:
1176                         BUG();
1177                 }
1178         } else {
1179                 /* Errata BTS #50, IHL must be 5 if no HW checksum */
1180                 cmd_sts |= 5 << ETH_TX_IHL_SHIFT;
1181                 desc->l4i_chk = 0;
1182         }
1183
1184         /* ensure all other descriptors are written before first cmd_sts */
1185         wmb();
1186         desc->cmd_sts = cmd_sts;
1187
1188         /* ensure all descriptors are written before poking hardware */
1189         wmb();
1190         mv643xx_eth_port_enable_tx(mp->port_num, ETH_TX_QUEUES_ENABLED);
1191
1192         mp->tx_desc_count += nr_frags + 1;
1193 }
1194
1195 /**
1196  * mv643xx_eth_start_xmit - queue an skb to the hardware for transmission
1197  *
1198  */
1199 static int mv643xx_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
1200 {
1201         struct mv643xx_private *mp = netdev_priv(dev);
1202         struct net_device_stats *stats = &mp->stats;
1203         unsigned long flags;
1204
1205         BUG_ON(netif_queue_stopped(dev));
1206         BUG_ON(skb == NULL);
1207
1208         if (mp->tx_ring_size - mp->tx_desc_count < MAX_DESCS_PER_SKB) {
1209                 printk(KERN_ERR "%s: transmit with queue full\n", dev->name);
1210                 netif_stop_queue(dev);
1211                 return 1;
1212         }
1213
1214         if (has_tiny_unaligned_frags(skb)) {
1215                 if (__skb_linearize(skb)) {
1216                         stats->tx_dropped++;
1217                         printk(KERN_DEBUG "%s: failed to linearize tiny "
1218                                         "unaligned fragment\n", dev->name);
1219                         return 1;
1220                 }
1221         }
1222
1223         spin_lock_irqsave(&mp->lock, flags);
1224
1225         eth_tx_submit_descs_for_skb(mp, skb);
1226         stats->tx_bytes = skb->len;
1227         stats->tx_packets++;
1228         dev->trans_start = jiffies;
1229
1230         if (mp->tx_ring_size - mp->tx_desc_count < MAX_DESCS_PER_SKB)
1231                 netif_stop_queue(dev);
1232
1233         spin_unlock_irqrestore(&mp->lock, flags);
1234
1235         return 0;               /* success */
1236 }
1237
1238 /*
1239  * mv643xx_eth_get_stats
1240  *
1241  * Returns a pointer to the interface statistics.
1242  *
1243  * Input :      dev - a pointer to the required interface
1244  *
1245  * Output :     a pointer to the interface's statistics
1246  */
1247
1248 static struct net_device_stats *mv643xx_eth_get_stats(struct net_device *dev)
1249 {
1250         struct mv643xx_private *mp = netdev_priv(dev);
1251
1252         return &mp->stats;
1253 }
1254
1255 #ifdef CONFIG_NET_POLL_CONTROLLER
1256 static void mv643xx_netpoll(struct net_device *netdev)
1257 {
1258         struct mv643xx_private *mp = netdev_priv(netdev);
1259         int port_num = mp->port_num;
1260
1261         mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num), ETH_INT_MASK_ALL);
1262         /* wait for previous write to complete */
1263         mv_read(MV643XX_ETH_INTERRUPT_MASK_REG(port_num));
1264
1265         mv643xx_eth_int_handler(netdev->irq, netdev);
1266
1267         mv_write(MV643XX_ETH_INTERRUPT_MASK_REG(port_num), ETH_INT_UNMASK_ALL);
1268 }
1269 #endif
1270
1271 static void mv643xx_init_ethtool_cmd(struct net_device *dev, int phy_address,
1272                                      int speed, int duplex,
1273                                      struct ethtool_cmd *cmd)
1274 {
1275         struct mv643xx_private *mp = netdev_priv(dev);
1276
1277         memset(cmd, 0, sizeof(*cmd));
1278
1279         cmd->port = PORT_MII;
1280         cmd->transceiver = XCVR_INTERNAL;
1281         cmd->phy_address = phy_address;
1282
1283         if (speed == 0) {
1284                 cmd->autoneg = AUTONEG_ENABLE;
1285                 /* mii lib checks, but doesn't use speed on AUTONEG_ENABLE */
1286                 cmd->speed = SPEED_100;
1287                 cmd->advertising = ADVERTISED_10baseT_Half  |
1288                                    ADVERTISED_10baseT_Full  |
1289                                    ADVERTISED_100baseT_Half |
1290                                    ADVERTISED_100baseT_Full;
1291                 if (mp->mii.supports_gmii)
1292                         cmd->advertising |= ADVERTISED_1000baseT_Full;
1293         } else {
1294                 cmd->autoneg = AUTONEG_DISABLE;
1295                 cmd->speed = speed;
1296                 cmd->duplex = duplex;
1297         }
1298 }
1299
1300 /*/
1301  * mv643xx_eth_probe
1302  *
1303  * First function called after registering the network device.
1304  * It's purpose is to initialize the device as an ethernet device,
1305  * fill the ethernet device structure with pointers * to functions,
1306  * and set the MAC address of the interface
1307  *
1308  * Input :      struct device *
1309  * Output :     -ENOMEM if failed , 0 if success
1310  */
1311 static int mv643xx_eth_probe(struct platform_device *pdev)
1312 {
1313         struct mv643xx_eth_platform_data *pd;
1314         int port_num;
1315         struct mv643xx_private *mp;
1316         struct net_device *dev;
1317         u8 *p;
1318         struct resource *res;
1319         int err;
1320         struct ethtool_cmd cmd;
1321         int duplex = DUPLEX_HALF;
1322         int speed = 0;                  /* default to auto-negotiation */
1323
1324         pd = pdev->dev.platform_data;
1325         if (pd == NULL) {
1326                 printk(KERN_ERR "No mv643xx_eth_platform_data\n");
1327                 return -ENODEV;
1328         }
1329
1330         dev = alloc_etherdev(sizeof(struct mv643xx_private));
1331         if (!dev)
1332                 return -ENOMEM;
1333
1334         platform_set_drvdata(pdev, dev);
1335
1336         mp = netdev_priv(dev);
1337
1338         res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
1339         BUG_ON(!res);
1340         dev->irq = res->start;
1341
1342         dev->open = mv643xx_eth_open;
1343         dev->stop = mv643xx_eth_stop;
1344         dev->hard_start_xmit = mv643xx_eth_start_xmit;
1345         dev->get_stats = mv643xx_eth_get_stats;
1346         dev->set_mac_address = mv643xx_eth_set_mac_address;
1347         dev->set_multicast_list = mv643xx_eth_set_rx_mode;
1348
1349         /* No need to Tx Timeout */
1350         dev->tx_timeout = mv643xx_eth_tx_timeout;
1351 #ifdef MV643XX_NAPI
1352         dev->poll = mv643xx_poll;
1353         dev->weight = 64;
1354 #endif
1355
1356 #ifdef CONFIG_NET_POLL_CONTROLLER
1357         dev->poll_controller = mv643xx_netpoll;
1358 #endif
1359
1360         dev->watchdog_timeo = 2 * HZ;
1361         dev->tx_queue_len = mp->tx_ring_size;
1362         dev->base_addr = 0;
1363         dev->change_mtu = mv643xx_eth_change_mtu;
1364         dev->do_ioctl = mv643xx_eth_do_ioctl;
1365         SET_ETHTOOL_OPS(dev, &mv643xx_ethtool_ops);
1366
1367 #ifdef MV643XX_CHECKSUM_OFFLOAD_TX
1368 #ifdef MAX_SKB_FRAGS
1369         /*
1370          * Zero copy can only work if we use Discovery II memory. Else, we will
1371          * have to map the buffers to ISA memory which is only 16 MB
1372          */
1373         dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
1374 #endif
1375 #endif
1376
1377         /* Configure the timeout task */
1378         INIT_WORK(&mp->tx_timeout_task, mv643xx_eth_tx_timeout_task);
1379
1380         spin_lock_init(&mp->lock);
1381
1382         port_num = pd->port_number;
1383
1384         /* set default config values */
1385         eth_port_uc_addr_get(dev, dev->dev_addr);
1386         mp->rx_ring_size = MV643XX_ETH_PORT_DEFAULT_RECEIVE_QUEUE_SIZE;
1387         mp->tx_ring_size = MV643XX_ETH_PORT_DEFAULT_TRANSMIT_QUEUE_SIZE;
1388
1389         if (is_valid_ether_addr(pd->mac_addr))
1390                 memcpy(dev->dev_addr, pd->mac_addr, 6);
1391
1392         if (pd->phy_addr || pd->force_phy_addr)
1393                 ethernet_phy_set(port_num, pd->phy_addr);
1394
1395         if (pd->rx_queue_size)
1396                 mp->rx_ring_size = pd->rx_queue_size;
1397
1398         if (pd->tx_queue_size)
1399                 mp->tx_ring_size = pd->tx_queue_size;
1400
1401         if (pd->tx_sram_size) {
1402                 mp->tx_sram_size = pd->tx_sram_size;
1403                 mp->tx_sram_addr = pd->tx_sram_addr;
1404         }
1405
1406         if (pd->rx_sram_size) {
1407                 mp->rx_sram_size = pd->rx_sram_size;
1408                 mp->rx_sram_addr = pd->rx_sram_addr;
1409         }
1410
1411         duplex = pd->duplex;
1412         speed = pd->speed;
1413
1414         mp->port_num = port_num;
1415
1416         /* Hook up MII support for ethtool */
1417         mp->mii.dev = dev;
1418         mp->mii.mdio_read = mv643xx_mdio_read;
1419         mp->mii.mdio_write = mv643xx_mdio_write;
1420         mp->mii.phy_id = ethernet_phy_get(port_num);
1421         mp->mii.phy_id_mask = 0x3f;
1422         mp->mii.reg_num_mask = 0x1f;
1423
1424         err = ethernet_phy_detect(port_num);
1425         if (err) {
1426                 pr_debug("MV643xx ethernet port %d: "
1427                                         "No PHY detected at addr %d\n",
1428                                         port_num, ethernet_phy_get(port_num));
1429                 goto out;
1430         }
1431
1432         ethernet_phy_reset(port_num);
1433         mp->mii.supports_gmii = mii_check_gmii_support(&mp->mii);
1434         mv643xx_init_ethtool_cmd(dev, mp->mii.phy_id, speed, duplex, &cmd);
1435         mv643xx_eth_update_pscr(dev, &cmd);
1436         mv643xx_set_settings(dev, &cmd);
1437
1438         SET_MODULE_OWNER(dev);
1439         SET_NETDEV_DEV(dev, &pdev->dev);
1440         err = register_netdev(dev);
1441         if (err)
1442                 goto out;
1443
1444         p = dev->dev_addr;
1445         printk(KERN_NOTICE
1446                 "%s: port %d with MAC address %02x:%02x:%02x:%02x:%02x:%02x\n",
1447                 dev->name, port_num, p[0], p[1], p[2], p[3], p[4], p[5]);
1448
1449         if (dev->features & NETIF_F_SG)
1450                 printk(KERN_NOTICE "%s: Scatter Gather Enabled\n", dev->name);
1451
1452         if (dev->features & NETIF_F_IP_CSUM)
1453                 printk(KERN_NOTICE "%s: TX TCP/IP Checksumming Supported\n",
1454                                                                 dev->name);
1455
1456 #ifdef MV643XX_CHECKSUM_OFFLOAD_TX
1457         printk(KERN_NOTICE "%s: RX TCP/UDP Checksum Offload ON \n", dev->name);
1458 #endif
1459
1460 #ifdef MV643XX_COAL
1461         printk(KERN_NOTICE "%s: TX and RX Interrupt Coalescing ON \n",
1462                                                                 dev->name);
1463 #endif
1464
1465 #ifdef MV643XX_NAPI
1466         printk(KERN_NOTICE "%s: RX NAPI Enabled \n", dev->name);
1467 #endif
1468
1469         if (mp->tx_sram_size > 0)
1470                 printk(KERN_NOTICE "%s: Using SRAM\n", dev->name);
1471
1472         return 0;
1473
1474 out:
1475         free_netdev(dev);
1476
1477         return err;
1478 }
1479
1480 static int mv643xx_eth_remove(struct platform_device *pdev)
1481 {
1482         struct net_device *dev = platform_get_drvdata(pdev);
1483
1484         unregister_netdev(dev);
1485         flush_scheduled_work();
1486
1487         free_netdev(dev);
1488         platform_set_drvdata(pdev, NULL);
1489         return 0;
1490 }
1491
1492 static int mv643xx_eth_shared_probe(struct platform_device *pdev)
1493 {
1494         struct resource *res;
1495
1496         printk(KERN_NOTICE "MV-643xx 10/100/1000 Ethernet Driver\n");
1497
1498         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1499         if (res == NULL)
1500                 return -ENODEV;
1501
1502         mv643xx_eth_shared_base = ioremap(res->start,
1503                                                 MV643XX_ETH_SHARED_REGS_SIZE);
1504         if (mv643xx_eth_shared_base == NULL)
1505                 return -ENOMEM;
1506
1507         return 0;
1508
1509 }
1510
1511 static int mv643xx_eth_shared_remove(struct platform_device *pdev)
1512 {
1513         iounmap(mv643xx_eth_shared_base);
1514         mv643xx_eth_shared_base = NULL;
1515
1516         return 0;
1517 }
1518
1519 static struct platform_driver mv643xx_eth_driver = {
1520         .probe = mv643xx_eth_probe,
1521         .remove = mv643xx_eth_remove,
1522         .driver = {
1523                 .name = MV643XX_ETH_NAME,
1524         },
1525 };
1526
1527 static struct platform_driver mv643xx_eth_shared_driver = {
1528         .probe = mv643xx_eth_shared_probe,
1529         .remove = mv643xx_eth_shared_remove,
1530         .driver = {
1531                 .name = MV643XX_ETH_SHARED_NAME,
1532         },
1533 };
1534
1535 /*
1536  * mv643xx_init_module
1537  *
1538  * Registers the network drivers into the Linux kernel
1539  *
1540  * Input :      N/A
1541  *
1542  * Output :     N/A
1543  */
1544 static int __init mv643xx_init_module(void)
1545 {
1546         int rc;
1547
1548         rc = platform_driver_register(&mv643xx_eth_shared_driver);
1549         if (!rc) {
1550                 rc = platform_driver_register(&mv643xx_eth_driver);
1551                 if (rc)
1552                         platform_driver_unregister(&mv643xx_eth_shared_driver);
1553         }
1554         return rc;
1555 }
1556
1557 /*
1558  * mv643xx_cleanup_module
1559  *
1560  * Registers the network drivers into the Linux kernel
1561  *
1562  * Input :      N/A
1563  *
1564  * Output :     N/A
1565  */
1566 static void __exit mv643xx_cleanup_module(void)
1567 {
1568         platform_driver_unregister(&mv643xx_eth_driver);
1569         platform_driver_unregister(&mv643xx_eth_shared_driver);
1570 }
1571
1572 module_init(mv643xx_init_module);
1573 module_exit(mv643xx_cleanup_module);
1574
1575 MODULE_LICENSE("GPL");
1576 MODULE_AUTHOR(  "Rabeeh Khoury, Assaf Hoffman, Matthew Dharm, Manish Lachwani"
1577                 " and Dale Farnsworth");
1578 MODULE_DESCRIPTION("Ethernet driver for Marvell MV643XX");
1579
1580 /*
1581  * The second part is the low level driver of the gigE ethernet ports.
1582  */
1583
1584 /*
1585  * Marvell's Gigabit Ethernet controller low level driver
1586  *
1587  * DESCRIPTION:
1588  *      This file introduce low level API to Marvell's Gigabit Ethernet
1589  *              controller. This Gigabit Ethernet Controller driver API controls
1590  *              1) Operations (i.e. port init, start, reset etc').
1591  *              2) Data flow (i.e. port send, receive etc').
1592  *              Each Gigabit Ethernet port is controlled via
1593  *              struct mv643xx_private.
1594  *              This struct includes user configuration information as well as
1595  *              driver internal data needed for its operations.
1596  *
1597  *              Supported Features:
1598  *              - This low level driver is OS independent. Allocating memory for
1599  *                the descriptor rings and buffers are not within the scope of
1600  *                this driver.
1601  *              - The user is free from Rx/Tx queue managing.
1602  *              - This low level driver introduce functionality API that enable
1603  *                the to operate Marvell's Gigabit Ethernet Controller in a
1604  *                convenient way.
1605  *              - Simple Gigabit Ethernet port operation API.
1606  *              - Simple Gigabit Ethernet port data flow API.
1607  *              - Data flow and operation API support per queue functionality.
1608  *              - Support cached descriptors for better performance.
1609  *              - Enable access to all four DRAM banks and internal SRAM memory
1610  *                spaces.
1611  *              - PHY access and control API.
1612  *              - Port control register configuration API.
1613  *              - Full control over Unicast and Multicast MAC configurations.
1614  *
1615  *              Operation flow:
1616  *
1617  *              Initialization phase
1618  *              This phase complete the initialization of the the
1619  *              mv643xx_private struct.
1620  *              User information regarding port configuration has to be set
1621  *              prior to calling the port initialization routine.
1622  *
1623  *              In this phase any port Tx/Rx activity is halted, MIB counters
1624  *              are cleared, PHY address is set according to user parameter and
1625  *              access to DRAM and internal SRAM memory spaces.
1626  *
1627  *              Driver ring initialization
1628  *              Allocating memory for the descriptor rings and buffers is not
1629  *              within the scope of this driver. Thus, the user is required to
1630  *              allocate memory for the descriptors ring and buffers. Those
1631  *              memory parameters are used by the Rx and Tx ring initialization
1632  *              routines in order to curve the descriptor linked list in a form
1633  *              of a ring.
1634  *              Note: Pay special attention to alignment issues when using
1635  *              cached descriptors/buffers. In this phase the driver store
1636  *              information in the mv643xx_private struct regarding each queue
1637  *              ring.
1638  *
1639  *              Driver start
1640  *              This phase prepares the Ethernet port for Rx and Tx activity.
1641  *              It uses the information stored in the mv643xx_private struct to
1642  *              initialize the various port registers.
1643  *
1644  *              Data flow:
1645  *              All packet references to/from the driver are done using
1646  *              struct pkt_info.
1647  *              This struct is a unified struct used with Rx and Tx operations.
1648  *              This way the user is not required to be familiar with neither
1649  *              Tx nor Rx descriptors structures.
1650  *              The driver's descriptors rings are management by indexes.
1651  *              Those indexes controls the ring resources and used to indicate
1652  *              a SW resource error:
1653  *              'current'
1654  *              This index points to the current available resource for use. For
1655  *              example in Rx process this index will point to the descriptor
1656  *              that will be passed to the user upon calling the receive
1657  *              routine.  In Tx process, this index will point to the descriptor
1658  *              that will be assigned with the user packet info and transmitted.
1659  *              'used'
1660  *              This index points to the descriptor that need to restore its
1661  *              resources. For example in Rx process, using the Rx buffer return
1662  *              API will attach the buffer returned in packet info to the
1663  *              descriptor pointed by 'used'. In Tx process, using the Tx
1664  *              descriptor return will merely return the user packet info with
1665  *              the command status of the transmitted buffer pointed by the
1666  *              'used' index. Nevertheless, it is essential to use this routine
1667  *              to update the 'used' index.
1668  *              'first'
1669  *              This index supports Tx Scatter-Gather. It points to the first
1670  *              descriptor of a packet assembled of multiple buffers. For
1671  *              example when in middle of Such packet we have a Tx resource
1672  *              error the 'curr' index get the value of 'first' to indicate
1673  *              that the ring returned to its state before trying to transmit
1674  *              this packet.
1675  *
1676  *              Receive operation:
1677  *              The eth_port_receive API set the packet information struct,
1678  *              passed by the caller, with received information from the
1679  *              'current' SDMA descriptor.
1680  *              It is the user responsibility to return this resource back
1681  *              to the Rx descriptor ring to enable the reuse of this source.
1682  *              Return Rx resource is done using the eth_rx_return_buff API.
1683  *
1684  *      Prior to calling the initialization routine eth_port_init() the user
1685  *      must set the following fields under mv643xx_private struct:
1686  *      port_num                User Ethernet port number.
1687  *      port_config             User port configuration value.
1688  *      port_config_extend      User port config extend value.
1689  *      port_sdma_config        User port SDMA config value.
1690  *      port_serial_control     User port serial control value.
1691  *
1692  *              This driver data flow is done using the struct pkt_info which
1693  *              is a unified struct for Rx and Tx operations:
1694  *
1695  *              byte_cnt        Tx/Rx descriptor buffer byte count.
1696  *              l4i_chk         CPU provided TCP Checksum. For Tx operation
1697  *                              only.
1698  *              cmd_sts         Tx/Rx descriptor command status.
1699  *              buf_ptr         Tx/Rx descriptor buffer pointer.
1700  *              return_info     Tx/Rx user resource return information.
1701  */
1702
1703 /* PHY routines */
1704 static int ethernet_phy_get(unsigned int eth_port_num);
1705 static void ethernet_phy_set(unsigned int eth_port_num, int phy_addr);
1706
1707 /* Ethernet Port routines */
1708 static void eth_port_set_filter_table_entry(int table, unsigned char entry);
1709
1710 /*
1711  * eth_port_init - Initialize the Ethernet port driver
1712  *
1713  * DESCRIPTION:
1714  *      This function prepares the ethernet port to start its activity:
1715  *      1) Completes the ethernet port driver struct initialization toward port
1716  *              start routine.
1717  *      2) Resets the device to a quiescent state in case of warm reboot.
1718  *      3) Enable SDMA access to all four DRAM banks as well as internal SRAM.
1719  *      4) Clean MAC tables. The reset status of those tables is unknown.
1720  *      5) Set PHY address.
1721  *      Note: Call this routine prior to eth_port_start routine and after
1722  *      setting user values in the user fields of Ethernet port control
1723  *      struct.
1724  *
1725  * INPUT:
1726  *      struct mv643xx_private *mp      Ethernet port control struct
1727  *
1728  * OUTPUT:
1729  *      See description.
1730  *
1731  * RETURN:
1732  *      None.
1733  */
1734 static void eth_port_init(struct mv643xx_private *mp)
1735 {
1736         mp->rx_resource_err = 0;
1737
1738         eth_port_reset(mp->port_num);
1739
1740         eth_port_init_mac_tables(mp->port_num);
1741 }
1742
1743 /*
1744  * eth_port_start - Start the Ethernet port activity.
1745  *
1746  * DESCRIPTION:
1747  *      This routine prepares the Ethernet port for Rx and Tx activity:
1748  *       1. Initialize Tx and Rx Current Descriptor Pointer for each queue that
1749  *          has been initialized a descriptor's ring (using
1750  *          ether_init_tx_desc_ring for Tx and ether_init_rx_desc_ring for Rx)
1751  *       2. Initialize and enable the Ethernet configuration port by writing to
1752  *          the port's configuration and command registers.
1753  *       3. Initialize and enable the SDMA by writing to the SDMA's
1754  *          configuration and command registers.  After completing these steps,
1755  *          the ethernet port SDMA can starts to perform Rx and Tx activities.
1756  *
1757  *      Note: Each Rx and Tx queue descriptor's list must be initialized prior
1758  *      to calling this function (use ether_init_tx_desc_ring for Tx queues
1759  *      and ether_init_rx_desc_ring for Rx queues).
1760  *
1761  * INPUT:
1762  *      dev - a pointer to the required interface
1763  *
1764  * OUTPUT:
1765  *      Ethernet port is ready to receive and transmit.
1766  *
1767  * RETURN:
1768  *      None.
1769  */
1770 static void eth_port_start(struct net_device *dev)
1771 {
1772         struct mv643xx_private *mp = netdev_priv(dev);
1773         unsigned int port_num = mp->port_num;
1774         int tx_curr_desc, rx_curr_desc;
1775         u32 pscr;
1776         struct ethtool_cmd ethtool_cmd;
1777
1778         /* Assignment of Tx CTRP of given queue */
1779         tx_curr_desc = mp->tx_curr_desc_q;
1780         mv_write(MV643XX_ETH_TX_CURRENT_QUEUE_DESC_PTR_0(port_num),
1781                 (u32)((struct eth_tx_desc *)mp->tx_desc_dma + tx_curr_desc));
1782
1783         /* Assignment of Rx CRDP of given queue */
1784         rx_curr_desc = mp->rx_curr_desc_q;
1785         mv_write(MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_0(port_num),
1786                 (u32)((struct eth_rx_desc *)mp->rx_desc_dma + rx_curr_desc));
1787
1788         /* Add the assigned Ethernet address to the port's address table */
1789         eth_port_uc_addr_set(port_num, dev->dev_addr);
1790
1791         /* Assign port configuration and command. */
1792         mv_write(MV643XX_ETH_PORT_CONFIG_REG(port_num),
1793                           MV643XX_ETH_PORT_CONFIG_DEFAULT_VALUE);
1794
1795         mv_write(MV643XX_ETH_PORT_CONFIG_EXTEND_REG(port_num),
1796                           MV643XX_ETH_PORT_CONFIG_EXTEND_DEFAULT_VALUE);
1797
1798         pscr = mv_read(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num));
1799
1800         pscr &= ~(MV643XX_ETH_SERIAL_PORT_ENABLE | MV643XX_ETH_FORCE_LINK_PASS);
1801         mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num), pscr);
1802
1803         pscr |= MV643XX_ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL |
1804                 MV643XX_ETH_DISABLE_AUTO_NEG_SPEED_GMII    |
1805                 MV643XX_ETH_DISABLE_AUTO_NEG_FOR_DUPLX     |
1806                 MV643XX_ETH_DO_NOT_FORCE_LINK_FAIL         |
1807                 MV643XX_ETH_SERIAL_PORT_CONTROL_RESERVED;
1808
1809         mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num), pscr);
1810
1811         pscr |= MV643XX_ETH_SERIAL_PORT_ENABLE;
1812         mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num), pscr);
1813
1814         /* Assign port SDMA configuration */
1815         mv_write(MV643XX_ETH_SDMA_CONFIG_REG(port_num),
1816                           MV643XX_ETH_PORT_SDMA_CONFIG_DEFAULT_VALUE);
1817
1818         /* Enable port Rx. */
1819         mv643xx_eth_port_enable_rx(port_num, ETH_RX_QUEUES_ENABLED);
1820
1821         /* Disable port bandwidth limits by clearing MTU register */
1822         mv_write(MV643XX_ETH_MAXIMUM_TRANSMIT_UNIT(port_num), 0);
1823
1824         /* save phy settings across reset */
1825         mv643xx_get_settings(dev, &ethtool_cmd);
1826         ethernet_phy_reset(mp->port_num);
1827         mv643xx_set_settings(dev, &ethtool_cmd);
1828 }
1829
1830 /*
1831  * eth_port_uc_addr_set - This function Set the port Unicast address.
1832  *
1833  * DESCRIPTION:
1834  *              This function Set the port Ethernet MAC address.
1835  *
1836  * INPUT:
1837  *      unsigned int    eth_port_num    Port number.
1838  *      char *          p_addr          Address to be set
1839  *
1840  * OUTPUT:
1841  *      Set MAC address low and high registers. also calls
1842  *      eth_port_set_filter_table_entry() to set the unicast
1843  *      table with the proper information.
1844  *
1845  * RETURN:
1846  *      N/A.
1847  *
1848  */
1849 static void eth_port_uc_addr_set(unsigned int eth_port_num,
1850                                                         unsigned char *p_addr)
1851 {
1852         unsigned int mac_h;
1853         unsigned int mac_l;
1854         int table;
1855
1856         mac_l = (p_addr[4] << 8) | (p_addr[5]);
1857         mac_h = (p_addr[0] << 24) | (p_addr[1] << 16) | (p_addr[2] << 8) |
1858                                                         (p_addr[3] << 0);
1859
1860         mv_write(MV643XX_ETH_MAC_ADDR_LOW(eth_port_num), mac_l);
1861         mv_write(MV643XX_ETH_MAC_ADDR_HIGH(eth_port_num), mac_h);
1862
1863         /* Accept frames of this address */
1864         table = MV643XX_ETH_DA_FILTER_UNICAST_TABLE_BASE(eth_port_num);
1865         eth_port_set_filter_table_entry(table, p_addr[5] & 0x0f);
1866 }
1867
1868 /*
1869  * eth_port_uc_addr_get - This function retrieves the port Unicast address
1870  * (MAC address) from the ethernet hw registers.
1871  *
1872  * DESCRIPTION:
1873  *              This function retrieves the port Ethernet MAC address.
1874  *
1875  * INPUT:
1876  *      unsigned int    eth_port_num    Port number.
1877  *      char            *MacAddr        pointer where the MAC address is stored
1878  *
1879  * OUTPUT:
1880  *      Copy the MAC address to the location pointed to by MacAddr
1881  *
1882  * RETURN:
1883  *      N/A.
1884  *
1885  */
1886 static void eth_port_uc_addr_get(struct net_device *dev, unsigned char *p_addr)
1887 {
1888         struct mv643xx_private *mp = netdev_priv(dev);
1889         unsigned int mac_h;
1890         unsigned int mac_l;
1891
1892         mac_h = mv_read(MV643XX_ETH_MAC_ADDR_HIGH(mp->port_num));
1893         mac_l = mv_read(MV643XX_ETH_MAC_ADDR_LOW(mp->port_num));
1894
1895         p_addr[0] = (mac_h >> 24) & 0xff;
1896         p_addr[1] = (mac_h >> 16) & 0xff;
1897         p_addr[2] = (mac_h >> 8) & 0xff;
1898         p_addr[3] = mac_h & 0xff;
1899         p_addr[4] = (mac_l >> 8) & 0xff;
1900         p_addr[5] = mac_l & 0xff;
1901 }
1902
1903 /*
1904  * The entries in each table are indexed by a hash of a packet's MAC
1905  * address.  One bit in each entry determines whether the packet is
1906  * accepted.  There are 4 entries (each 8 bits wide) in each register
1907  * of the table.  The bits in each entry are defined as follows:
1908  *      0       Accept=1, Drop=0
1909  *      3-1     Queue                   (ETH_Q0=0)
1910  *      7-4     Reserved = 0;
1911  */
1912 static void eth_port_set_filter_table_entry(int table, unsigned char entry)
1913 {
1914         unsigned int table_reg;
1915         unsigned int tbl_offset;
1916         unsigned int reg_offset;
1917
1918         tbl_offset = (entry / 4) * 4;   /* Register offset of DA table entry */
1919         reg_offset = entry % 4;         /* Entry offset within the register */
1920
1921         /* Set "accepts frame bit" at specified table entry */
1922         table_reg = mv_read(table + tbl_offset);
1923         table_reg |= 0x01 << (8 * reg_offset);
1924         mv_write(table + tbl_offset, table_reg);
1925 }
1926
1927 /*
1928  * eth_port_mc_addr - Multicast address settings.
1929  *
1930  * The MV device supports multicast using two tables:
1931  * 1) Special Multicast Table for MAC addresses of the form
1932  *    0x01-00-5E-00-00-XX (where XX is between 0x00 and 0x_FF).
1933  *    The MAC DA[7:0] bits are used as a pointer to the Special Multicast
1934  *    Table entries in the DA-Filter table.
1935  * 2) Other Multicast Table for multicast of another type. A CRC-8bit
1936  *    is used as an index to the Other Multicast Table entries in the
1937  *    DA-Filter table.  This function calculates the CRC-8bit value.
1938  * In either case, eth_port_set_filter_table_entry() is then called
1939  * to set to set the actual table entry.
1940  */
1941 static void eth_port_mc_addr(unsigned int eth_port_num, unsigned char *p_addr)
1942 {
1943         unsigned int mac_h;
1944         unsigned int mac_l;
1945         unsigned char crc_result = 0;
1946         int table;
1947         int mac_array[48];
1948         int crc[8];
1949         int i;
1950
1951         if ((p_addr[0] == 0x01) && (p_addr[1] == 0x00) &&
1952             (p_addr[2] == 0x5E) && (p_addr[3] == 0x00) && (p_addr[4] == 0x00)) {
1953                 table = MV643XX_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE
1954                                         (eth_port_num);
1955                 eth_port_set_filter_table_entry(table, p_addr[5]);
1956                 return;
1957         }
1958
1959         /* Calculate CRC-8 out of the given address */
1960         mac_h = (p_addr[0] << 8) | (p_addr[1]);
1961         mac_l = (p_addr[2] << 24) | (p_addr[3] << 16) |
1962                         (p_addr[4] << 8) | (p_addr[5] << 0);
1963
1964         for (i = 0; i < 32; i++)
1965                 mac_array[i] = (mac_l >> i) & 0x1;
1966         for (i = 32; i < 48; i++)
1967                 mac_array[i] = (mac_h >> (i - 32)) & 0x1;
1968
1969         crc[0] = mac_array[45] ^ mac_array[43] ^ mac_array[40] ^ mac_array[39] ^
1970                  mac_array[35] ^ mac_array[34] ^ mac_array[31] ^ mac_array[30] ^
1971                  mac_array[28] ^ mac_array[23] ^ mac_array[21] ^ mac_array[19] ^
1972                  mac_array[18] ^ mac_array[16] ^ mac_array[14] ^ mac_array[12] ^
1973                  mac_array[8]  ^ mac_array[7]  ^ mac_array[6]  ^ mac_array[0];
1974
1975         crc[1] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^ mac_array[43] ^
1976                  mac_array[41] ^ mac_array[39] ^ mac_array[36] ^ mac_array[34] ^
1977                  mac_array[32] ^ mac_array[30] ^ mac_array[29] ^ mac_array[28] ^
1978                  mac_array[24] ^ mac_array[23] ^ mac_array[22] ^ mac_array[21] ^
1979                  mac_array[20] ^ mac_array[18] ^ mac_array[17] ^ mac_array[16] ^
1980                  mac_array[15] ^ mac_array[14] ^ mac_array[13] ^ mac_array[12] ^
1981                  mac_array[9]  ^ mac_array[6]  ^ mac_array[1]  ^ mac_array[0];
1982
1983         crc[2] = mac_array[47] ^ mac_array[46] ^ mac_array[44] ^ mac_array[43] ^
1984                  mac_array[42] ^ mac_array[39] ^ mac_array[37] ^ mac_array[34] ^
1985                  mac_array[33] ^ mac_array[29] ^ mac_array[28] ^ mac_array[25] ^
1986                  mac_array[24] ^ mac_array[22] ^ mac_array[17] ^ mac_array[15] ^
1987                  mac_array[13] ^ mac_array[12] ^ mac_array[10] ^ mac_array[8]  ^
1988                  mac_array[6]  ^ mac_array[2]  ^ mac_array[1]  ^ mac_array[0];
1989
1990         crc[3] = mac_array[47] ^ mac_array[45] ^ mac_array[44] ^ mac_array[43] ^
1991                  mac_array[40] ^ mac_array[38] ^ mac_array[35] ^ mac_array[34] ^
1992                  mac_array[30] ^ mac_array[29] ^ mac_array[26] ^ mac_array[25] ^
1993                  mac_array[23] ^ mac_array[18] ^ mac_array[16] ^ mac_array[14] ^
1994                  mac_array[13] ^ mac_array[11] ^ mac_array[9]  ^ mac_array[7]  ^
1995                  mac_array[3]  ^ mac_array[2]  ^ mac_array[1];
1996
1997         crc[4] = mac_array[46] ^ mac_array[45] ^ mac_array[44] ^ mac_array[41] ^
1998                  mac_array[39] ^ mac_array[36] ^ mac_array[35] ^ mac_array[31] ^
1999                  mac_array[30] ^ mac_array[27] ^ mac_array[26] ^ mac_array[24] ^
2000                  mac_array[19] ^ mac_array[17] ^ mac_array[15] ^ mac_array[14] ^
2001                  mac_array[12] ^ mac_array[10] ^ mac_array[8]  ^ mac_array[4]  ^
2002                  mac_array[3]  ^ mac_array[2];
2003
2004         crc[5] = mac_array[47] ^ mac_array[46] ^ mac_array[45] ^ mac_array[42] ^
2005                  mac_array[40] ^ mac_array[37] ^ mac_array[36] ^ mac_array[32] ^
2006                  mac_array[31] ^ mac_array[28] ^ mac_array[27] ^ mac_array[25] ^
2007                  mac_array[20] ^ mac_array[18] ^ mac_array[16] ^ mac_array[15] ^
2008                  mac_array[13] ^ mac_array[11] ^ mac_array[9]  ^ mac_array[5]  ^
2009                  mac_array[4]  ^ mac_array[3];
2010
2011         crc[6] = mac_array[47] ^ mac_array[46] ^ mac_array[43] ^ mac_array[41] ^
2012                  mac_array[38] ^ mac_array[37] ^ mac_array[33] ^ mac_array[32] ^
2013                  mac_array[29] ^ mac_array[28] ^ mac_array[26] ^ mac_array[21] ^
2014                  mac_array[19] ^ mac_array[17] ^ mac_array[16] ^ mac_array[14] ^
2015                  mac_array[12] ^ mac_array[10] ^ mac_array[6]  ^ mac_array[5]  ^
2016                  mac_array[4];
2017
2018         crc[7] = mac_array[47] ^ mac_array[44] ^ mac_array[42] ^ mac_array[39] ^
2019                  mac_array[38] ^ mac_array[34] ^ mac_array[33] ^ mac_array[30] ^
2020                  mac_array[29] ^ mac_array[27] ^ mac_array[22] ^ mac_array[20] ^
2021                  mac_array[18] ^ mac_array[17] ^ mac_array[15] ^ mac_array[13] ^
2022                  mac_array[11] ^ mac_array[7]  ^ mac_array[6]  ^ mac_array[5];
2023
2024         for (i = 0; i < 8; i++)
2025                 crc_result = crc_result | (crc[i] << i);
2026
2027         table = MV643XX_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(eth_port_num);
2028         eth_port_set_filter_table_entry(table, crc_result);
2029 }
2030
2031 /*
2032  * Set the entire multicast list based on dev->mc_list.
2033  */
2034 static void eth_port_set_multicast_list(struct net_device *dev)
2035 {
2036
2037         struct dev_mc_list      *mc_list;
2038         int                     i;
2039         int                     table_index;
2040         struct mv643xx_private  *mp = netdev_priv(dev);
2041         unsigned int            eth_port_num = mp->port_num;
2042
2043         /* If the device is in promiscuous mode or in all multicast mode,
2044          * we will fully populate both multicast tables with accept.
2045          * This is guaranteed to yield a match on all multicast addresses...
2046          */
2047         if ((dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI)) {
2048                 for (table_index = 0; table_index <= 0xFC; table_index += 4) {
2049                         /* Set all entries in DA filter special multicast
2050                          * table (Ex_dFSMT)
2051                          * Set for ETH_Q0 for now
2052                          * Bits
2053                          * 0      Accept=1, Drop=0
2054                          * 3-1  Queue    ETH_Q0=0
2055                          * 7-4  Reserved = 0;
2056                          */
2057                         mv_write(MV643XX_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE(eth_port_num) + table_index, 0x01010101);
2058
2059                         /* Set all entries in DA filter other multicast
2060                          * table (Ex_dFOMT)
2061                          * Set for ETH_Q0 for now
2062                          * Bits
2063                          * 0      Accept=1, Drop=0
2064                          * 3-1  Queue    ETH_Q0=0
2065                          * 7-4  Reserved = 0;
2066                          */
2067                         mv_write(MV643XX_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE(eth_port_num) + table_index, 0x01010101);
2068                 }
2069                 return;
2070         }
2071
2072         /* We will clear out multicast tables every time we get the list.
2073          * Then add the entire new list...
2074          */
2075         for (table_index = 0; table_index <= 0xFC; table_index += 4) {
2076                 /* Clear DA filter special multicast table (Ex_dFSMT) */
2077                 mv_write(MV643XX_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE
2078                                 (eth_port_num) + table_index, 0);
2079
2080                 /* Clear DA filter other multicast table (Ex_dFOMT) */
2081                 mv_write(MV643XX_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE
2082                                 (eth_port_num) + table_index, 0);
2083         }
2084
2085         /* Get pointer to net_device multicast list and add each one... */
2086         for (i = 0, mc_list = dev->mc_list;
2087                         (i < 256) && (mc_list != NULL) && (i < dev->mc_count);
2088                         i++, mc_list = mc_list->next)
2089                 if (mc_list->dmi_addrlen == 6)
2090                         eth_port_mc_addr(eth_port_num, mc_list->dmi_addr);
2091 }
2092
2093 /*
2094  * eth_port_init_mac_tables - Clear all entrance in the UC, SMC and OMC tables
2095  *
2096  * DESCRIPTION:
2097  *      Go through all the DA filter tables (Unicast, Special Multicast &
2098  *      Other Multicast) and set each entry to 0.
2099  *
2100  * INPUT:
2101  *      unsigned int    eth_port_num    Ethernet Port number.
2102  *
2103  * OUTPUT:
2104  *      Multicast and Unicast packets are rejected.
2105  *
2106  * RETURN:
2107  *      None.
2108  */
2109 static void eth_port_init_mac_tables(unsigned int eth_port_num)
2110 {
2111         int table_index;
2112
2113         /* Clear DA filter unicast table (Ex_dFUT) */
2114         for (table_index = 0; table_index <= 0xC; table_index += 4)
2115                 mv_write(MV643XX_ETH_DA_FILTER_UNICAST_TABLE_BASE
2116                                         (eth_port_num) + table_index, 0);
2117
2118         for (table_index = 0; table_index <= 0xFC; table_index += 4) {
2119                 /* Clear DA filter special multicast table (Ex_dFSMT) */
2120                 mv_write(MV643XX_ETH_DA_FILTER_SPECIAL_MULTICAST_TABLE_BASE
2121                                         (eth_port_num) + table_index, 0);
2122                 /* Clear DA filter other multicast table (Ex_dFOMT) */
2123                 mv_write(MV643XX_ETH_DA_FILTER_OTHER_MULTICAST_TABLE_BASE
2124                                         (eth_port_num) + table_index, 0);
2125         }
2126 }
2127
2128 /*
2129  * eth_clear_mib_counters - Clear all MIB counters
2130  *
2131  * DESCRIPTION:
2132  *      This function clears all MIB counters of a specific ethernet port.
2133  *      A read from the MIB counter will reset the counter.
2134  *
2135  * INPUT:
2136  *      unsigned int    eth_port_num    Ethernet Port number.
2137  *
2138  * OUTPUT:
2139  *      After reading all MIB counters, the counters resets.
2140  *
2141  * RETURN:
2142  *      MIB counter value.
2143  *
2144  */
2145 static void eth_clear_mib_counters(unsigned int eth_port_num)
2146 {
2147         int i;
2148
2149         /* Perform dummy reads from MIB counters */
2150         for (i = ETH_MIB_GOOD_OCTETS_RECEIVED_LOW; i < ETH_MIB_LATE_COLLISION;
2151                                                                         i += 4)
2152                 mv_read(MV643XX_ETH_MIB_COUNTERS_BASE(eth_port_num) + i);
2153 }
2154
2155 static inline u32 read_mib(struct mv643xx_private *mp, int offset)
2156 {
2157         return mv_read(MV643XX_ETH_MIB_COUNTERS_BASE(mp->port_num) + offset);
2158 }
2159
2160 static void eth_update_mib_counters(struct mv643xx_private *mp)
2161 {
2162         struct mv643xx_mib_counters *p = &mp->mib_counters;
2163         int offset;
2164
2165         p->good_octets_received +=
2166                 read_mib(mp, ETH_MIB_GOOD_OCTETS_RECEIVED_LOW);
2167         p->good_octets_received +=
2168                 (u64)read_mib(mp, ETH_MIB_GOOD_OCTETS_RECEIVED_HIGH) << 32;
2169
2170         for (offset = ETH_MIB_BAD_OCTETS_RECEIVED;
2171                         offset <= ETH_MIB_FRAMES_1024_TO_MAX_OCTETS;
2172                         offset += 4)
2173                 *(u32 *)((char *)p + offset) += read_mib(mp, offset);
2174
2175         p->good_octets_sent += read_mib(mp, ETH_MIB_GOOD_OCTETS_SENT_LOW);
2176         p->good_octets_sent +=
2177                 (u64)read_mib(mp, ETH_MIB_GOOD_OCTETS_SENT_HIGH) << 32;
2178
2179         for (offset = ETH_MIB_GOOD_FRAMES_SENT;
2180                         offset <= ETH_MIB_LATE_COLLISION;
2181                         offset += 4)
2182                 *(u32 *)((char *)p + offset) += read_mib(mp, offset);
2183 }
2184
2185 /*
2186  * ethernet_phy_detect - Detect whether a phy is present
2187  *
2188  * DESCRIPTION:
2189  *      This function tests whether there is a PHY present on
2190  *      the specified port.
2191  *
2192  * INPUT:
2193  *      unsigned int    eth_port_num    Ethernet Port number.
2194  *
2195  * OUTPUT:
2196  *      None
2197  *
2198  * RETURN:
2199  *      0 on success
2200  *      -ENODEV on failure
2201  *
2202  */
2203 static int ethernet_phy_detect(unsigned int port_num)
2204 {
2205         unsigned int phy_reg_data0;
2206         int auto_neg;
2207
2208         eth_port_read_smi_reg(port_num, 0, &phy_reg_data0);
2209         auto_neg = phy_reg_data0 & 0x1000;
2210         phy_reg_data0 ^= 0x1000;        /* invert auto_neg */
2211         eth_port_write_smi_reg(port_num, 0, phy_reg_data0);
2212
2213         eth_port_read_smi_reg(port_num, 0, &phy_reg_data0);
2214         if ((phy_reg_data0 & 0x1000) == auto_neg)
2215                 return -ENODEV;                         /* change didn't take */
2216
2217         phy_reg_data0 ^= 0x1000;
2218         eth_port_write_smi_reg(port_num, 0, phy_reg_data0);
2219         return 0;
2220 }
2221
2222 /*
2223  * ethernet_phy_get - Get the ethernet port PHY address.
2224  *
2225  * DESCRIPTION:
2226  *      This routine returns the given ethernet port PHY address.
2227  *
2228  * INPUT:
2229  *      unsigned int    eth_port_num    Ethernet Port number.
2230  *
2231  * OUTPUT:
2232  *      None.
2233  *
2234  * RETURN:
2235  *      PHY address.
2236  *
2237  */
2238 static int ethernet_phy_get(unsigned int eth_port_num)
2239 {
2240         unsigned int reg_data;
2241
2242         reg_data = mv_read(MV643XX_ETH_PHY_ADDR_REG);
2243
2244         return ((reg_data >> (5 * eth_port_num)) & 0x1f);
2245 }
2246
2247 /*
2248  * ethernet_phy_set - Set the ethernet port PHY address.
2249  *
2250  * DESCRIPTION:
2251  *      This routine sets the given ethernet port PHY address.
2252  *
2253  * INPUT:
2254  *      unsigned int    eth_port_num    Ethernet Port number.
2255  *      int             phy_addr        PHY address.
2256  *
2257  * OUTPUT:
2258  *      None.
2259  *
2260  * RETURN:
2261  *      None.
2262  *
2263  */
2264 static void ethernet_phy_set(unsigned int eth_port_num, int phy_addr)
2265 {
2266         u32 reg_data;
2267         int addr_shift = 5 * eth_port_num;
2268
2269         reg_data = mv_read(MV643XX_ETH_PHY_ADDR_REG);
2270         reg_data &= ~(0x1f << addr_shift);
2271         reg_data |= (phy_addr & 0x1f) << addr_shift;
2272         mv_write(MV643XX_ETH_PHY_ADDR_REG, reg_data);
2273 }
2274
2275 /*
2276  * ethernet_phy_reset - Reset Ethernet port PHY.
2277  *
2278  * DESCRIPTION:
2279  *      This routine utilizes the SMI interface to reset the ethernet port PHY.
2280  *
2281  * INPUT:
2282  *      unsigned int    eth_port_num    Ethernet Port number.
2283  *
2284  * OUTPUT:
2285  *      The PHY is reset.
2286  *
2287  * RETURN:
2288  *      None.
2289  *
2290  */
2291 static void ethernet_phy_reset(unsigned int eth_port_num)
2292 {
2293         unsigned int phy_reg_data;
2294
2295         /* Reset the PHY */
2296         eth_port_read_smi_reg(eth_port_num, 0, &phy_reg_data);
2297         phy_reg_data |= 0x8000; /* Set bit 15 to reset the PHY */
2298         eth_port_write_smi_reg(eth_port_num, 0, phy_reg_data);
2299
2300         /* wait for PHY to come out of reset */
2301         do {
2302                 udelay(1);
2303                 eth_port_read_smi_reg(eth_port_num, 0, &phy_reg_data);
2304         } while (phy_reg_data & 0x8000);
2305 }
2306
2307 static void mv643xx_eth_port_enable_tx(unsigned int port_num,
2308                                         unsigned int queues)
2309 {
2310         mv_write(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num), queues);
2311 }
2312
2313 static void mv643xx_eth_port_enable_rx(unsigned int port_num,
2314                                         unsigned int queues)
2315 {
2316         mv_write(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num), queues);
2317 }
2318
2319 static unsigned int mv643xx_eth_port_disable_tx(unsigned int port_num)
2320 {
2321         u32 queues;
2322
2323         /* Stop Tx port activity. Check port Tx activity. */
2324         queues = mv_read(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num))
2325                                                         & 0xFF;
2326         if (queues) {
2327                 /* Issue stop command for active queues only */
2328                 mv_write(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num),
2329                                                         (queues << 8));
2330
2331                 /* Wait for all Tx activity to terminate. */
2332                 /* Check port cause register that all Tx queues are stopped */
2333                 while (mv_read(MV643XX_ETH_TRANSMIT_QUEUE_COMMAND_REG(port_num))
2334                                                         & 0xFF)
2335                         udelay(PHY_WAIT_MICRO_SECONDS);
2336
2337                 /* Wait for Tx FIFO to empty */
2338                 while (mv_read(MV643XX_ETH_PORT_STATUS_REG(port_num)) &
2339                                                         ETH_PORT_TX_FIFO_EMPTY)
2340                         udelay(PHY_WAIT_MICRO_SECONDS);
2341         }
2342
2343         return queues;
2344 }
2345
2346 static unsigned int mv643xx_eth_port_disable_rx(unsigned int port_num)
2347 {
2348         u32 queues;
2349
2350         /* Stop Rx port activity. Check port Rx activity. */
2351         queues = mv_read(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num))
2352                                                         & 0xFF;
2353         if (queues) {
2354                 /* Issue stop command for active queues only */
2355                 mv_write(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num),
2356                                                         (queues << 8));
2357
2358                 /* Wait for all Rx activity to terminate. */
2359                 /* Check port cause register that all Rx queues are stopped */
2360                 while (mv_read(MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port_num))
2361                                                         & 0xFF)
2362                         udelay(PHY_WAIT_MICRO_SECONDS);
2363         }
2364
2365         return queues;
2366 }
2367
2368 /*
2369  * eth_port_reset - Reset Ethernet port
2370  *
2371  * DESCRIPTION:
2372  *      This routine resets the chip by aborting any SDMA engine activity and
2373  *      clearing the MIB counters. The Receiver and the Transmit unit are in
2374  *      idle state after this command is performed and the port is disabled.
2375  *
2376  * INPUT:
2377  *      unsigned int    eth_port_num    Ethernet Port number.
2378  *
2379  * OUTPUT:
2380  *      Channel activity is halted.
2381  *
2382  * RETURN:
2383  *      None.
2384  *
2385  */
2386 static void eth_port_reset(unsigned int port_num)
2387 {
2388         unsigned int reg_data;
2389
2390         mv643xx_eth_port_disable_tx(port_num);
2391         mv643xx_eth_port_disable_rx(port_num);
2392
2393         /* Clear all MIB counters */
2394         eth_clear_mib_counters(port_num);
2395
2396         /* Reset the Enable bit in the Configuration Register */
2397         reg_data = mv_read(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num));
2398         reg_data &= ~(MV643XX_ETH_SERIAL_PORT_ENABLE            |
2399                         MV643XX_ETH_DO_NOT_FORCE_LINK_FAIL      |
2400                         MV643XX_ETH_FORCE_LINK_PASS);
2401         mv_write(MV643XX_ETH_PORT_SERIAL_CONTROL_REG(port_num), reg_data);
2402 }
2403
2404
2405 /*
2406  * eth_port_read_smi_reg - Read PHY registers
2407  *
2408  * DESCRIPTION:
2409  *      This routine utilize the SMI interface to interact with the PHY in
2410  *      order to perform PHY register read.
2411  *
2412  * INPUT:
2413  *      unsigned int    port_num        Ethernet Port number.
2414  *      unsigned int    phy_reg         PHY register address offset.
2415  *      unsigned int    *value          Register value buffer.
2416  *
2417  * OUTPUT:
2418  *      Write the value of a specified PHY register into given buffer.
2419  *
2420  * RETURN:
2421  *      false if the PHY is busy or read data is not in valid state.
2422  *      true otherwise.
2423  *
2424  */
2425 static void eth_port_read_smi_reg(unsigned int port_num,
2426                                 unsigned int phy_reg, unsigned int *value)
2427 {
2428         int phy_addr = ethernet_phy_get(port_num);
2429         unsigned long flags;
2430         int i;
2431
2432         /* the SMI register is a shared resource */
2433         spin_lock_irqsave(&mv643xx_eth_phy_lock, flags);
2434
2435         /* wait for the SMI register to become available */
2436         for (i = 0; mv_read(MV643XX_ETH_SMI_REG) & ETH_SMI_BUSY; i++) {
2437                 if (i == PHY_WAIT_ITERATIONS) {
2438                         printk("mv643xx PHY busy timeout, port %d\n", port_num);
2439                         goto out;
2440                 }
2441                 udelay(PHY_WAIT_MICRO_SECONDS);
2442         }
2443
2444         mv_write(MV643XX_ETH_SMI_REG,
2445                 (phy_addr << 16) | (phy_reg << 21) | ETH_SMI_OPCODE_READ);
2446
2447         /* now wait for the data to be valid */
2448         for (i = 0; !(mv_read(MV643XX_ETH_SMI_REG) & ETH_SMI_READ_VALID); i++) {
2449                 if (i == PHY_WAIT_ITERATIONS) {
2450                         printk("mv643xx PHY read timeout, port %d\n", port_num);
2451                         goto out;
2452                 }
2453                 udelay(PHY_WAIT_MICRO_SECONDS);
2454         }
2455
2456         *value = mv_read(MV643XX_ETH_SMI_REG) & 0xffff;
2457 out:
2458         spin_unlock_irqrestore(&mv643xx_eth_phy_lock, flags);
2459 }
2460
2461 /*
2462  * eth_port_write_smi_reg - Write to PHY registers
2463  *
2464  * DESCRIPTION:
2465  *      This routine utilize the SMI interface to interact with the PHY in
2466  *      order to perform writes to PHY registers.
2467  *
2468  * INPUT:
2469  *      unsigned int    eth_port_num    Ethernet Port number.
2470  *      unsigned int    phy_reg         PHY register address offset.
2471  *      unsigned int    value           Register value.
2472  *
2473  * OUTPUT:
2474  *      Write the given value to the specified PHY register.
2475  *
2476  * RETURN:
2477  *      false if the PHY is busy.
2478  *      true otherwise.
2479  *
2480  */
2481 static void eth_port_write_smi_reg(unsigned int eth_port_num,
2482                                    unsigned int phy_reg, unsigned int value)
2483 {
2484         int phy_addr;
2485         int i;
2486         unsigned long flags;
2487
2488         phy_addr = ethernet_phy_get(eth_port_num);
2489
2490         /* the SMI register is a shared resource */
2491         spin_lock_irqsave(&mv643xx_eth_phy_lock, flags);
2492
2493         /* wait for the SMI register to become available */
2494         for (i = 0; mv_read(MV643XX_ETH_SMI_REG) & ETH_SMI_BUSY; i++) {
2495                 if (i == PHY_WAIT_ITERATIONS) {
2496                         printk("mv643xx PHY busy timeout, port %d\n",
2497                                                                 eth_port_num);
2498                         goto out;
2499                 }
2500                 udelay(PHY_WAIT_MICRO_SECONDS);
2501         }
2502
2503         mv_write(MV643XX_ETH_SMI_REG, (phy_addr << 16) | (phy_reg << 21) |
2504                                 ETH_SMI_OPCODE_WRITE | (value & 0xffff));
2505 out:
2506         spin_unlock_irqrestore(&mv643xx_eth_phy_lock, flags);
2507 }
2508
2509 /*
2510  * Wrappers for MII support library.
2511  */
2512 static int mv643xx_mdio_read(struct net_device *dev, int phy_id, int location)
2513 {
2514         int val;
2515         struct mv643xx_private *mp = netdev_priv(dev);
2516
2517         eth_port_read_smi_reg(mp->port_num, location, &val);
2518         return val;
2519 }
2520
2521 static void mv643xx_mdio_write(struct net_device *dev, int phy_id, int location, int val)
2522 {
2523         struct mv643xx_private *mp = netdev_priv(dev);
2524         eth_port_write_smi_reg(mp->port_num, location, val);
2525 }
2526
2527 /*
2528  * eth_port_receive - Get received information from Rx ring.
2529  *
2530  * DESCRIPTION:
2531  *      This routine returns the received data to the caller. There is no
2532  *      data copying during routine operation. All information is returned
2533  *      using pointer to packet information struct passed from the caller.
2534  *      If the routine exhausts Rx ring resources then the resource error flag
2535  *      is set.
2536  *
2537  * INPUT:
2538  *      struct mv643xx_private  *mp             Ethernet Port Control srtuct.
2539  *      struct pkt_info         *p_pkt_info     User packet buffer.
2540  *
2541  * OUTPUT:
2542  *      Rx ring current and used indexes are updated.
2543  *
2544  * RETURN:
2545  *      ETH_ERROR in case the routine can not access Rx desc ring.
2546  *      ETH_QUEUE_FULL if Rx ring resources are exhausted.
2547  *      ETH_END_OF_JOB if there is no received data.
2548  *      ETH_OK otherwise.
2549  */
2550 static ETH_FUNC_RET_STATUS eth_port_receive(struct mv643xx_private *mp,
2551                                                 struct pkt_info *p_pkt_info)
2552 {
2553         int rx_next_curr_desc, rx_curr_desc, rx_used_desc;
2554         volatile struct eth_rx_desc *p_rx_desc;
2555         unsigned int command_status;
2556         unsigned long flags;
2557
2558         /* Do not process Rx ring in case of Rx ring resource error */
2559         if (mp->rx_resource_err)
2560                 return ETH_QUEUE_FULL;
2561
2562         spin_lock_irqsave(&mp->lock, flags);
2563
2564         /* Get the Rx Desc ring 'curr and 'used' indexes */
2565         rx_curr_desc = mp->rx_curr_desc_q;
2566         rx_used_desc = mp->rx_used_desc_q;
2567
2568         p_rx_desc = &mp->p_rx_desc_area[rx_curr_desc];
2569
2570         /* The following parameters are used to save readings from memory */
2571         command_status = p_rx_desc->cmd_sts;
2572         rmb();
2573
2574         /* Nothing to receive... */
2575         if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) {
2576                 spin_unlock_irqrestore(&mp->lock, flags);
2577                 return ETH_END_OF_JOB;
2578         }
2579
2580         p_pkt_info->byte_cnt = (p_rx_desc->byte_cnt) - RX_BUF_OFFSET;
2581         p_pkt_info->cmd_sts = command_status;
2582         p_pkt_info->buf_ptr = (p_rx_desc->buf_ptr) + RX_BUF_OFFSET;
2583         p_pkt_info->return_info = mp->rx_skb[rx_curr_desc];
2584         p_pkt_info->l4i_chk = p_rx_desc->buf_size;
2585
2586         /*
2587          * Clean the return info field to indicate that the
2588          * packet has been moved to the upper layers
2589          */
2590         mp->rx_skb[rx_curr_desc] = NULL;
2591
2592         /* Update current index in data structure */
2593         rx_next_curr_desc = (rx_curr_desc + 1) % mp->rx_ring_size;
2594         mp->rx_curr_desc_q = rx_next_curr_desc;
2595
2596         /* Rx descriptors exhausted. Set the Rx ring resource error flag */
2597         if (rx_next_curr_desc == rx_used_desc)
2598                 mp->rx_resource_err = 1;
2599
2600         spin_unlock_irqrestore(&mp->lock, flags);
2601
2602         return ETH_OK;
2603 }
2604
2605 /*
2606  * eth_rx_return_buff - Returns a Rx buffer back to the Rx ring.
2607  *
2608  * DESCRIPTION:
2609  *      This routine returns a Rx buffer back to the Rx ring. It retrieves the
2610  *      next 'used' descriptor and attached the returned buffer to it.
2611  *      In case the Rx ring was in "resource error" condition, where there are
2612  *      no available Rx resources, the function resets the resource error flag.
2613  *
2614  * INPUT:
2615  *      struct mv643xx_private  *mp             Ethernet Port Control srtuct.
2616  *      struct pkt_info         *p_pkt_info     Information on returned buffer.
2617  *
2618  * OUTPUT:
2619  *      New available Rx resource in Rx descriptor ring.
2620  *
2621  * RETURN:
2622  *      ETH_ERROR in case the routine can not access Rx desc ring.
2623  *      ETH_OK otherwise.
2624  */
2625 static ETH_FUNC_RET_STATUS eth_rx_return_buff(struct mv643xx_private *mp,
2626                                                 struct pkt_info *p_pkt_info)
2627 {
2628         int used_rx_desc;       /* Where to return Rx resource */
2629         volatile struct eth_rx_desc *p_used_rx_desc;
2630         unsigned long flags;
2631
2632         spin_lock_irqsave(&mp->lock, flags);
2633
2634         /* Get 'used' Rx descriptor */
2635         used_rx_desc = mp->rx_used_desc_q;
2636         p_used_rx_desc = &mp->p_rx_desc_area[used_rx_desc];
2637
2638         p_used_rx_desc->buf_ptr = p_pkt_info->buf_ptr;
2639         p_used_rx_desc->buf_size = p_pkt_info->byte_cnt;
2640         mp->rx_skb[used_rx_desc] = p_pkt_info->return_info;
2641
2642         /* Flush the write pipe */
2643
2644         /* Return the descriptor to DMA ownership */
2645         wmb();
2646         p_used_rx_desc->cmd_sts =
2647                         ETH_BUFFER_OWNED_BY_DMA | ETH_RX_ENABLE_INTERRUPT;
2648         wmb();
2649
2650         /* Move the used descriptor pointer to the next descriptor */
2651         mp->rx_used_desc_q = (used_rx_desc + 1) % mp->rx_ring_size;
2652
2653         /* Any Rx return cancels the Rx resource error status */
2654         mp->rx_resource_err = 0;
2655
2656         spin_unlock_irqrestore(&mp->lock, flags);
2657
2658         return ETH_OK;
2659 }
2660
2661 /************* Begin ethtool support *************************/
2662
2663 struct mv643xx_stats {
2664         char stat_string[ETH_GSTRING_LEN];
2665         int sizeof_stat;
2666         int stat_offset;
2667 };
2668
2669 #define MV643XX_STAT(m) sizeof(((struct mv643xx_private *)0)->m), \
2670                                         offsetof(struct mv643xx_private, m)
2671
2672 static const struct mv643xx_stats mv643xx_gstrings_stats[] = {
2673         { "rx_packets", MV643XX_STAT(stats.rx_packets) },
2674         { "tx_packets", MV643XX_STAT(stats.tx_packets) },
2675         { "rx_bytes", MV643XX_STAT(stats.rx_bytes) },
2676         { "tx_bytes", MV643XX_STAT(stats.tx_bytes) },
2677         { "rx_errors", MV643XX_STAT(stats.rx_errors) },
2678         { "tx_errors", MV643XX_STAT(stats.tx_errors) },
2679         { "rx_dropped", MV643XX_STAT(stats.rx_dropped) },
2680         { "tx_dropped", MV643XX_STAT(stats.tx_dropped) },
2681         { "good_octets_received", MV643XX_STAT(mib_counters.good_octets_received) },
2682         { "bad_octets_received", MV643XX_STAT(mib_counters.bad_octets_received) },
2683         { "internal_mac_transmit_err", MV643XX_STAT(mib_counters.internal_mac_transmit_err) },
2684         { "good_frames_received", MV643XX_STAT(mib_counters.good_frames_received) },
2685         { "bad_frames_received", MV643XX_STAT(mib_counters.bad_frames_received) },
2686         { "broadcast_frames_received", MV643XX_STAT(mib_counters.broadcast_frames_received) },
2687         { "multicast_frames_received", MV643XX_STAT(mib_counters.multicast_frames_received) },
2688         { "frames_64_octets", MV643XX_STAT(mib_counters.frames_64_octets) },
2689         { "frames_65_to_127_octets", MV643XX_STAT(mib_counters.frames_65_to_127_octets) },
2690         { "frames_128_to_255_octets", MV643XX_STAT(mib_counters.frames_128_to_255_octets) },
2691         { "frames_256_to_511_octets", MV643XX_STAT(mib_counters.frames_256_to_511_octets) },
2692         { "frames_512_to_1023_octets", MV643XX_STAT(mib_counters.frames_512_to_1023_octets) },
2693         { "frames_1024_to_max_octets", MV643XX_STAT(mib_counters.frames_1024_to_max_octets) },
2694         { "good_octets_sent", MV643XX_STAT(mib_counters.good_octets_sent) },
2695         { "good_frames_sent", MV643XX_STAT(mib_counters.good_frames_sent) },
2696         { "excessive_collision", MV643XX_STAT(mib_counters.excessive_collision) },
2697         { "multicast_frames_sent", MV643XX_STAT(mib_counters.multicast_frames_sent) },
2698         { "broadcast_frames_sent", MV643XX_STAT(mib_counters.broadcast_frames_sent) },
2699         { "unrec_mac_control_received", MV643XX_STAT(mib_counters.unrec_mac_control_received) },
2700         { "fc_sent", MV643XX_STAT(mib_counters.fc_sent) },
2701         { "good_fc_received", MV643XX_STAT(mib_counters.good_fc_received) },
2702         { "bad_fc_received", MV643XX_STAT(mib_counters.bad_fc_received) },
2703         { "undersize_received", MV643XX_STAT(mib_counters.undersize_received) },
2704         { "fragments_received", MV643XX_STAT(mib_counters.fragments_received) },
2705         { "oversize_received", MV643XX_STAT(mib_counters.oversize_received) },
2706         { "jabber_received", MV643XX_STAT(mib_counters.jabber_received) },
2707         { "mac_receive_error", MV643XX_STAT(mib_counters.mac_receive_error) },
2708         { "bad_crc_event", MV643XX_STAT(mib_counters.bad_crc_event) },
2709         { "collision", MV643XX_STAT(mib_counters.collision) },
2710         { "late_collision", MV643XX_STAT(mib_counters.late_collision) },
2711 };
2712
2713 #define MV643XX_STATS_LEN       \
2714         sizeof(mv643xx_gstrings_stats) / sizeof(struct mv643xx_stats)
2715
2716 static void mv643xx_get_drvinfo(struct net_device *netdev,
2717                                 struct ethtool_drvinfo *drvinfo)
2718 {
2719         strncpy(drvinfo->driver,  mv643xx_driver_name, 32);
2720         strncpy(drvinfo->version, mv643xx_driver_version, 32);
2721         strncpy(drvinfo->fw_version, "N/A", 32);
2722         strncpy(drvinfo->bus_info, "mv643xx", 32);
2723         drvinfo->n_stats = MV643XX_STATS_LEN;
2724 }
2725
2726 static int mv643xx_get_stats_count(struct net_device *netdev)
2727 {
2728         return MV643XX_STATS_LEN;
2729 }
2730
2731 static void mv643xx_get_ethtool_stats(struct net_device *netdev,
2732                                 struct ethtool_stats *stats, uint64_t *data)
2733 {
2734         struct mv643xx_private *mp = netdev->priv;
2735         int i;
2736
2737         eth_update_mib_counters(mp);
2738
2739         for (i = 0; i < MV643XX_STATS_LEN; i++) {
2740                 char *p = (char *)mp+mv643xx_gstrings_stats[i].stat_offset;
2741                 data[i] = (mv643xx_gstrings_stats[i].sizeof_stat ==
2742                         sizeof(uint64_t)) ? *(uint64_t *)p : *(uint32_t *)p;
2743         }
2744 }
2745
2746 static void mv643xx_get_strings(struct net_device *netdev, uint32_t stringset,
2747                                 uint8_t *data)
2748 {
2749         int i;
2750
2751         switch(stringset) {
2752         case ETH_SS_STATS:
2753                 for (i=0; i < MV643XX_STATS_LEN; i++) {
2754                         memcpy(data + i * ETH_GSTRING_LEN,
2755                                         mv643xx_gstrings_stats[i].stat_string,
2756                                         ETH_GSTRING_LEN);
2757                 }
2758                 break;
2759         }
2760 }
2761
2762 static u32 mv643xx_eth_get_link(struct net_device *dev)
2763 {
2764         struct mv643xx_private *mp = netdev_priv(dev);
2765
2766         return mii_link_ok(&mp->mii);
2767 }
2768
2769 static int mv643xx_eth_nway_restart(struct net_device *dev)
2770 {
2771         struct mv643xx_private *mp = netdev_priv(dev);
2772
2773         return mii_nway_restart(&mp->mii);
2774 }
2775
2776 static int mv643xx_eth_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
2777 {
2778         struct mv643xx_private *mp = netdev_priv(dev);
2779
2780         return generic_mii_ioctl(&mp->mii, if_mii(ifr), cmd, NULL);
2781 }
2782
2783 static const struct ethtool_ops mv643xx_ethtool_ops = {
2784         .get_settings           = mv643xx_get_settings,
2785         .set_settings           = mv643xx_set_settings,
2786         .get_drvinfo            = mv643xx_get_drvinfo,
2787         .get_link               = mv643xx_eth_get_link,
2788         .get_sg                 = ethtool_op_get_sg,
2789         .set_sg                 = ethtool_op_set_sg,
2790         .get_stats_count        = mv643xx_get_stats_count,
2791         .get_ethtool_stats      = mv643xx_get_ethtool_stats,
2792         .get_strings            = mv643xx_get_strings,
2793         .get_stats_count        = mv643xx_get_stats_count,
2794         .get_ethtool_stats      = mv643xx_get_ethtool_stats,
2795         .nway_reset             = mv643xx_eth_nway_restart,
2796 };
2797
2798 /************* End ethtool support *************************/