drivers/net/ethernet/tundra/tsi108_eth.c

   1 /*******************************************************************************
   2
   3   Copyright(c) 2006 Tundra Semiconductor Corporation.
   4
   5   This program is free software; you can redistribute it and/or modify it
   6   under the terms of the GNU General Public License as published by the Free
   7   Software Foundation; either version 2 of the License, or (at your option)
   8   any later version.
   9
  10   This program is distributed in the hope that it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc., 59
  17   Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  18
  19 *******************************************************************************/
  20
  21 /* This driver is based on the driver code originally developed
  22  * for the Intel IOC80314 (ForestLake) Gigabit Ethernet by
  23  * scott.wood@timesys.com  * Copyright (C) 2003 TimeSys Corporation
  24  *
  25  * Currently changes from original version are:
  26  * - porting to Tsi108-based platform and kernel 2.6 (kong.lai@tundra.com)
  27  * - modifications to handle two ports independently and support for
  28  *   additional PHY devices (alexandre.bounine@tundra.com)
  29  * - Get hardware information from platform device. (tie-fei.zang@freescale.com)
  30  *
  31  */
  32
  33 #include <linux/module.h>
  34 #include <linux/types.h>
  35 #include <linux/init.h>
  36 #include <linux/interrupt.h>
  37 #include <linux/net.h>
  38 #include <linux/netdevice.h>
  39 #include <linux/etherdevice.h>
  40 #include <linux/ethtool.h>
  41 #include <linux/skbuff.h>
  42 #include <linux/spinlock.h>
  43 #include <linux/delay.h>
  44 #include <linux/crc32.h>
  45 #include <linux/mii.h>
  46 #include <linux/device.h>
  47 #include <linux/pci.h>
  48 #include <linux/rtnetlink.h>
  49 #include <linux/timer.h>
  50 #include <linux/platform_device.h>
  51 #include <linux/gfp.h>
  52
  53 #include <asm/system.h>
  54 #include <asm/io.h>
  55 #include <asm/tsi108.h>
  56
  57 #include "tsi108_eth.h"
  58
  59 #define MII_READ_DELAY 10000    /* max link wait time in msec */
  60
  61 #define TSI108_RXRING_LEN     256
  62
  63 /* NOTE: The driver currently does not support receiving packets
  64  * larger than the buffer size, so don't decrease this (unless you
  65  * want to add such support).
  66  */
  67 #define TSI108_RXBUF_SIZE     1536
  68
  69 #define TSI108_TXRING_LEN     256
  70
  71 #define TSI108_TX_INT_FREQ    64
  72
  73 /* Check the phy status every half a second. */
  74 #define CHECK_PHY_INTERVAL (HZ/2)
  75
  76 static int tsi108_init_one(struct platform_device *pdev);
  77 static int tsi108_ether_remove(struct platform_device *pdev);
  78
  79 struct tsi108_prv_data {
  80         void  __iomem *regs;    /* Base of normal regs */
  81         void  __iomem *phyregs; /* Base of register bank used for PHY access */
  82
  83         struct net_device *dev;
  84         struct napi_struct napi;
  85
  86         unsigned int phy;               /* Index of PHY for this interface */
  87         unsigned int irq_num;
  88         unsigned int id;
  89         unsigned int phy_type;
  90
  91         struct timer_list timer;/* Timer that triggers the check phy function */
  92         unsigned int rxtail;    /* Next entry in rxring to read */
  93         unsigned int rxhead;    /* Next entry in rxring to give a new buffer */
  94         unsigned int rxfree;    /* Number of free, allocated RX buffers */
  95
  96         unsigned int rxpending; /* Non-zero if there are still descriptors
  97                                  * to be processed from a previous descriptor
  98                                  * interrupt condition that has been cleared */
  99
 100         unsigned int txtail;    /* Next TX descriptor to check status on */
 101         unsigned int txhead;    /* Next TX descriptor to use */
 102
 103         /* Number of free TX descriptors.  This could be calculated from
 104          * rxhead and rxtail if one descriptor were left unused to disambiguate
 105          * full and empty conditions, but it's simpler to just keep track
 106          * explicitly. */
 107
 108         unsigned int txfree;
 109
 110         unsigned int phy_ok;            /* The PHY is currently powered on. */
 111
 112         /* PHY status (duplex is 1 for half, 2 for full,
 113          * so that the default 0 indicates that neither has
 114          * yet been configured). */
 115
 116         unsigned int link_up;
 117         unsigned int speed;
 118         unsigned int duplex;
 119
 120         tx_desc *txring;
 121         rx_desc *rxring;
 122         struct sk_buff *txskbs[TSI108_TXRING_LEN];
 123         struct sk_buff *rxskbs[TSI108_RXRING_LEN];
 124
 125         dma_addr_t txdma, rxdma;
 126
 127         /* txlock nests in misclock and phy_lock */
 128
 129         spinlock_t txlock, misclock;
 130
 131         /* stats is used to hold the upper bits of each hardware counter,
 132          * and tmpstats is used to hold the full values for returning
 133          * to the caller of get_stats().  They must be separate in case
 134          * an overflow interrupt occurs before the stats are consumed.
 135          */
 136
 137         struct net_device_stats stats;
 138         struct net_device_stats tmpstats;
 139
 140         /* These stats are kept separate in hardware, thus require individual
 141          * fields for handling carry.  They are combined in get_stats.
 142          */
 143
 144         unsigned long rx_fcs;   /* Add to rx_frame_errors */
 145         unsigned long rx_short_fcs;     /* Add to rx_frame_errors */
 146         unsigned long rx_long_fcs;      /* Add to rx_frame_errors */
 147         unsigned long rx_underruns;     /* Add to rx_length_errors */
 148         unsigned long rx_overruns;      /* Add to rx_length_errors */
 149
 150         unsigned long tx_coll_abort;    /* Add to tx_aborted_errors/collisions */
 151         unsigned long tx_pause_drop;    /* Add to tx_aborted_errors */
 152
 153         unsigned long mc_hash[16];
 154         u32 msg_enable;                 /* debug message level */
 155         struct mii_if_info mii_if;
 156         unsigned int init_media;
 157 };
 158
 159 /* Structure for a device driver */
 160
 161 static struct platform_driver tsi_eth_driver = {
 162         .probe = tsi108_init_one,
 163         .remove = tsi108_ether_remove,
 164         .driver = {
 165                 .name = "tsi-ethernet",
 166                 .owner = THIS_MODULE,
 167         },
 168 };
 169
 170 static void tsi108_timed_checker(unsigned long dev_ptr);
 171
 172 static void dump_eth_one(struct net_device *dev)
 173 {
 174         struct tsi108_prv_data *data = netdev_priv(dev);
 175
 176         printk("Dumping %s...\n", dev->name);
 177         printk("intstat %x intmask %x phy_ok %d"
 178                " link %d speed %d duplex %d\n",
 179                TSI_READ(TSI108_EC_INTSTAT),
 180                TSI_READ(TSI108_EC_INTMASK), data->phy_ok,
 181                data->link_up, data->speed, data->duplex);
 182
 183         printk("TX: head %d, tail %d, free %d, stat %x, estat %x, err %x\n",
 184                data->txhead, data->txtail, data->txfree,
 185                TSI_READ(TSI108_EC_TXSTAT),
 186                TSI_READ(TSI108_EC_TXESTAT),
 187                TSI_READ(TSI108_EC_TXERR));
 188
 189         printk("RX: head %d, tail %d, free %d, stat %x,"
 190                " estat %x, err %x, pending %d\n\n",
 191                data->rxhead, data->rxtail, data->rxfree,
 192                TSI_READ(TSI108_EC_RXSTAT),
 193                TSI_READ(TSI108_EC_RXESTAT),
 194                TSI_READ(TSI108_EC_RXERR), data->rxpending);
 195 }
 196
 197 /* Synchronization is needed between the thread and up/down events.
 198  * Note that the PHY is accessed through the same registers for both
 199  * interfaces, so this can't be made interface-specific.
 200  */
 201
 202 static DEFINE_SPINLOCK(phy_lock);
 203
 204 static int tsi108_read_mii(struct tsi108_prv_data *data, int reg)
 205 {
 206         unsigned i;
 207
 208         TSI_WRITE_PHY(TSI108_MAC_MII_ADDR,
 209                                 (data->phy << TSI108_MAC_MII_ADDR_PHY) |
 210                                 (reg << TSI108_MAC_MII_ADDR_REG));
 211         TSI_WRITE_PHY(TSI108_MAC_MII_CMD, 0);
 212         TSI_WRITE_PHY(TSI108_MAC_MII_CMD, TSI108_MAC_MII_CMD_READ);
 213         for (i = 0; i < 100; i++) {
 214                 if (!(TSI_READ_PHY(TSI108_MAC_MII_IND) &
 215                       (TSI108_MAC_MII_IND_NOTVALID | TSI108_MAC_MII_IND_BUSY)))
 216                         break;
 217                 udelay(10);
 218         }
 219
 220         if (i == 100)
 221                 return 0xffff;
 222         else
 223                 return TSI_READ_PHY(TSI108_MAC_MII_DATAIN);
 224 }
 225
 226 static void tsi108_write_mii(struct tsi108_prv_data *data,
 227                                 int reg, u16 val)
 228 {
 229         unsigned i = 100;
 230         TSI_WRITE_PHY(TSI108_MAC_MII_ADDR,
 231                                 (data->phy << TSI108_MAC_MII_ADDR_PHY) |
 232                                 (reg << TSI108_MAC_MII_ADDR_REG));
 233         TSI_WRITE_PHY(TSI108_MAC_MII_DATAOUT, val);
 234         while (i--) {
 235                 if(!(TSI_READ_PHY(TSI108_MAC_MII_IND) &
 236                         TSI108_MAC_MII_IND_BUSY))
 237                         break;
 238                 udelay(10);
 239         }
 240 }
 241
 242 static int tsi108_mdio_read(struct net_device *dev, int addr, int reg)
 243 {
 244         struct tsi108_prv_data *data = netdev_priv(dev);
 245         return tsi108_read_mii(data, reg);
 246 }
 247
 248 static void tsi108_mdio_write(struct net_device *dev, int addr, int reg, int val)
 249 {
 250         struct tsi108_prv_data *data = netdev_priv(dev);
 251         tsi108_write_mii(data, reg, val);
 252 }
 253
 254 static inline void tsi108_write_tbi(struct tsi108_prv_data *data,
 255                                         int reg, u16 val)
 256 {
 257         unsigned i = 1000;
 258         TSI_WRITE(TSI108_MAC_MII_ADDR,
 259                              (0x1e << TSI108_MAC_MII_ADDR_PHY)
 260                              | (reg << TSI108_MAC_MII_ADDR_REG));
 261         TSI_WRITE(TSI108_MAC_MII_DATAOUT, val);
 262         while(i--) {
 263                 if(!(TSI_READ(TSI108_MAC_MII_IND) & TSI108_MAC_MII_IND_BUSY))
 264                         return;
 265                 udelay(10);
 266         }
 267         printk(KERN_ERR "%s function time out\n", __func__);
 268 }
 269
 270 static int mii_speed(struct mii_if_info *mii)
 271 {
 272         int advert, lpa, val, media;
 273         int lpa2 = 0;
 274         int speed;
 275
 276         if (!mii_link_ok(mii))
 277                 return 0;
 278
 279         val = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_BMSR);
 280         if ((val & BMSR_ANEGCOMPLETE) == 0)
 281                 return 0;
 282
 283         advert = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_ADVERTISE);
 284         lpa = (*mii->mdio_read) (mii->dev, mii->phy_id, MII_LPA);
 285         media = mii_nway_result(advert & lpa);
 286
 287         if (mii->supports_gmii)
 288                 lpa2 = mii->mdio_read(mii->dev, mii->phy_id, MII_STAT1000);
 289
 290         speed = lpa2 & (LPA_1000FULL | LPA_1000HALF) ? 1000 :
 291                         (media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? 100 : 10);
 292         return speed;
 293 }
 294
 295 static void tsi108_check_phy(struct net_device *dev)
 296 {
 297         struct tsi108_prv_data *data = netdev_priv(dev);
 298         u32 mac_cfg2_reg, portctrl_reg;
 299         u32 duplex;
 300         u32 speed;
 301         unsigned long flags;
 302
 303         spin_lock_irqsave(&phy_lock, flags);
 304
 305         if (!data->phy_ok)
 306                 goto out;
 307
 308         duplex = mii_check_media(&data->mii_if, netif_msg_link(data), data->init_media);
 309         data->init_media = 0;
 310
 311         if (netif_carrier_ok(dev)) {
 312
 313                 speed = mii_speed(&data->mii_if);
 314
 315                 if ((speed != data->speed) || duplex) {
 316
 317                         mac_cfg2_reg = TSI_READ(TSI108_MAC_CFG2);
 318                         portctrl_reg = TSI_READ(TSI108_EC_PORTCTRL);
 319
 320                         mac_cfg2_reg &= ~TSI108_MAC_CFG2_IFACE_MASK;
 321
 322                         if (speed == 1000) {
 323                                 mac_cfg2_reg |= TSI108_MAC_CFG2_GIG;
 324                                 portctrl_reg &= ~TSI108_EC_PORTCTRL_NOGIG;
 325                         } else {
 326                                 mac_cfg2_reg |= TSI108_MAC_CFG2_NOGIG;
 327                                 portctrl_reg |= TSI108_EC_PORTCTRL_NOGIG;
 328                         }
 329
 330                         data->speed = speed;
 331
 332                         if (data->mii_if.full_duplex) {
 333                                 mac_cfg2_reg |= TSI108_MAC_CFG2_FULLDUPLEX;
 334                                 portctrl_reg &= ~TSI108_EC_PORTCTRL_HALFDUPLEX;
 335                                 data->duplex = 2;
 336                         } else {
 337                                 mac_cfg2_reg &= ~TSI108_MAC_CFG2_FULLDUPLEX;
 338                                 portctrl_reg |= TSI108_EC_PORTCTRL_HALFDUPLEX;
 339                                 data->duplex = 1;
 340                         }
 341
 342                         TSI_WRITE(TSI108_MAC_CFG2, mac_cfg2_reg);
 343                         TSI_WRITE(TSI108_EC_PORTCTRL, portctrl_reg);
 344                 }
 345
 346                 if (data->link_up == 0) {
 347                         /* The manual says it can take 3-4 usecs for the speed change
 348                          * to take effect.
 349                          */
 350                         udelay(5);
 351
 352                         spin_lock(&data->txlock);
 353                         if (is_valid_ether_addr(dev->dev_addr) && data->txfree)
 354                                 netif_wake_queue(dev);
 355
 356                         data->link_up = 1;
 357                         spin_unlock(&data->txlock);
 358                 }
 359         } else {
 360                 if (data->link_up == 1) {
 361                         netif_stop_queue(dev);
 362                         data->link_up = 0;
 363                         printk(KERN_NOTICE "%s : link is down\n", dev->name);
 364                 }
 365
 366                 goto out;
 367         }
 368
 369
 370 out:
 371         spin_unlock_irqrestore(&phy_lock, flags);
 372 }
 373
 374 static inline void
 375 tsi108_stat_carry_one(int carry, int carry_bit, int carry_shift,
 376                       unsigned long *upper)
 377 {
 378         if (carry & carry_bit)
 379                 *upper += carry_shift;
 380 }
 381
 382 static void tsi108_stat_carry(struct net_device *dev)
 383 {
 384         struct tsi108_prv_data *data = netdev_priv(dev);
 385         u32 carry1, carry2;
 386
 387         spin_lock_irq(&data->misclock);
 388
 389         carry1 = TSI_READ(TSI108_STAT_CARRY1);
 390         carry2 = TSI_READ(TSI108_STAT_CARRY2);
 391
 392         TSI_WRITE(TSI108_STAT_CARRY1, carry1);
 393         TSI_WRITE(TSI108_STAT_CARRY2, carry2);
 394
 395         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXBYTES,
 396                               TSI108_STAT_RXBYTES_CARRY, &data->stats.rx_bytes);
 397
 398         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXPKTS,
 399                               TSI108_STAT_RXPKTS_CARRY,
 400                               &data->stats.rx_packets);
 401
 402         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXFCS,
 403                               TSI108_STAT_RXFCS_CARRY, &data->rx_fcs);
 404
 405         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXMCAST,
 406                               TSI108_STAT_RXMCAST_CARRY,
 407                               &data->stats.multicast);
 408
 409         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXALIGN,
 410                               TSI108_STAT_RXALIGN_CARRY,
 411                               &data->stats.rx_frame_errors);
 412
 413         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXLENGTH,
 414                               TSI108_STAT_RXLENGTH_CARRY,
 415                               &data->stats.rx_length_errors);
 416
 417         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXRUNT,
 418                               TSI108_STAT_RXRUNT_CARRY, &data->rx_underruns);
 419
 420         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXJUMBO,
 421                               TSI108_STAT_RXJUMBO_CARRY, &data->rx_overruns);
 422
 423         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXFRAG,
 424                               TSI108_STAT_RXFRAG_CARRY, &data->rx_short_fcs);
 425
 426         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXJABBER,
 427                               TSI108_STAT_RXJABBER_CARRY, &data->rx_long_fcs);
 428
 429         tsi108_stat_carry_one(carry1, TSI108_STAT_CARRY1_RXDROP,
 430                               TSI108_STAT_RXDROP_CARRY,
 431                               &data->stats.rx_missed_errors);
 432
 433         tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXBYTES,
 434                               TSI108_STAT_TXBYTES_CARRY, &data->stats.tx_bytes);
 435
 436         tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXPKTS,
 437                               TSI108_STAT_TXPKTS_CARRY,
 438                               &data->stats.tx_packets);
 439
 440         tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXEXDEF,
 441                               TSI108_STAT_TXEXDEF_CARRY,
 442                               &data->stats.tx_aborted_errors);
 443
 444         tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXEXCOL,
 445                               TSI108_STAT_TXEXCOL_CARRY, &data->tx_coll_abort);
 446
 447         tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXTCOL,
 448                               TSI108_STAT_TXTCOL_CARRY,
 449                               &data->stats.collisions);
 450
 451         tsi108_stat_carry_one(carry2, TSI108_STAT_CARRY2_TXPAUSE,
 452                               TSI108_STAT_TXPAUSEDROP_CARRY,
 453                               &data->tx_pause_drop);
 454
 455         spin_unlock_irq(&data->misclock);
 456 }
 457
 458 /* Read a stat counter atomically with respect to carries.
 459  * data->misclock must be held.
 460  */
 461 static inline unsigned long
 462 tsi108_read_stat(struct tsi108_prv_data * data, int reg, int carry_bit,
 463                  int carry_shift, unsigned long *upper)
 464 {
 465         int carryreg;
 466         unsigned long val;
 467
 468         if (reg < 0xb0)
 469                 carryreg = TSI108_STAT_CARRY1;
 470         else
 471                 carryreg = TSI108_STAT_CARRY2;
 472
 473       again:
 474         val = TSI_READ(reg) | *upper;
 475
 476         /* Check to see if it overflowed, but the interrupt hasn't
 477          * been serviced yet.  If so, handle the carry here, and
 478          * try again.
 479          */
 480
 481         if (unlikely(TSI_READ(carryreg) & carry_bit)) {
 482                 *upper += carry_shift;
 483                 TSI_WRITE(carryreg, carry_bit);
 484                 goto again;
 485         }
 486
 487         return val;
 488 }
 489
 490 static struct net_device_stats *tsi108_get_stats(struct net_device *dev)
 491 {
 492         unsigned long excol;
 493
 494         struct tsi108_prv_data *data = netdev_priv(dev);
 495         spin_lock_irq(&data->misclock);
 496
 497         data->tmpstats.rx_packets =
 498             tsi108_read_stat(data, TSI108_STAT_RXPKTS,
 499                              TSI108_STAT_CARRY1_RXPKTS,
 500                              TSI108_STAT_RXPKTS_CARRY, &data->stats.rx_packets);
 501
 502         data->tmpstats.tx_packets =
 503             tsi108_read_stat(data, TSI108_STAT_TXPKTS,
 504                              TSI108_STAT_CARRY2_TXPKTS,
 505                              TSI108_STAT_TXPKTS_CARRY, &data->stats.tx_packets);
 506
 507         data->tmpstats.rx_bytes =
 508             tsi108_read_stat(data, TSI108_STAT_RXBYTES,
 509                              TSI108_STAT_CARRY1_RXBYTES,
 510                              TSI108_STAT_RXBYTES_CARRY, &data->stats.rx_bytes);
 511
 512         data->tmpstats.tx_bytes =
 513             tsi108_read_stat(data, TSI108_STAT_TXBYTES,
 514                              TSI108_STAT_CARRY2_TXBYTES,
 515                              TSI108_STAT_TXBYTES_CARRY, &data->stats.tx_bytes);
 516
 517         data->tmpstats.multicast =
 518             tsi108_read_stat(data, TSI108_STAT_RXMCAST,
 519                              TSI108_STAT_CARRY1_RXMCAST,
 520                              TSI108_STAT_RXMCAST_CARRY, &data->stats.multicast);
 521
 522         excol = tsi108_read_stat(data, TSI108_STAT_TXEXCOL,
 523                                  TSI108_STAT_CARRY2_TXEXCOL,
 524                                  TSI108_STAT_TXEXCOL_CARRY,
 525                                  &data->tx_coll_abort);
 526
 527         data->tmpstats.collisions =
 528             tsi108_read_stat(data, TSI108_STAT_TXTCOL,
 529                              TSI108_STAT_CARRY2_TXTCOL,
 530                              TSI108_STAT_TXTCOL_CARRY, &data->stats.collisions);
 531
 532         data->tmpstats.collisions += excol;
 533
 534         data->tmpstats.rx_length_errors =
 535             tsi108_read_stat(data, TSI108_STAT_RXLENGTH,
 536                              TSI108_STAT_CARRY1_RXLENGTH,
 537                              TSI108_STAT_RXLENGTH_CARRY,
 538                              &data->stats.rx_length_errors);
 539
 540         data->tmpstats.rx_length_errors +=
 541             tsi108_read_stat(data, TSI108_STAT_RXRUNT,
 542                              TSI108_STAT_CARRY1_RXRUNT,
 543                              TSI108_STAT_RXRUNT_CARRY, &data->rx_underruns);
 544
 545         data->tmpstats.rx_length_errors +=
 546             tsi108_read_stat(data, TSI108_STAT_RXJUMBO,
 547                              TSI108_STAT_CARRY1_RXJUMBO,
 548                              TSI108_STAT_RXJUMBO_CARRY, &data->rx_overruns);
 549
 550         data->tmpstats.rx_frame_errors =
 551             tsi108_read_stat(data, TSI108_STAT_RXALIGN,
 552                              TSI108_STAT_CARRY1_RXALIGN,
 553                              TSI108_STAT_RXALIGN_CARRY,
 554                              &data->stats.rx_frame_errors);
 555
 556         data->tmpstats.rx_frame_errors +=
 557             tsi108_read_stat(data, TSI108_STAT_RXFCS,
 558                              TSI108_STAT_CARRY1_RXFCS, TSI108_STAT_RXFCS_CARRY,
 559                              &data->rx_fcs);
 560
 561         data->tmpstats.rx_frame_errors +=
 562             tsi108_read_stat(data, TSI108_STAT_RXFRAG,
 563                              TSI108_STAT_CARRY1_RXFRAG,
 564                              TSI108_STAT_RXFRAG_CARRY, &data->rx_short_fcs);
 565
 566         data->tmpstats.rx_missed_errors =
 567             tsi108_read_stat(data, TSI108_STAT_RXDROP,
 568                              TSI108_STAT_CARRY1_RXDROP,
 569                              TSI108_STAT_RXDROP_CARRY,
 570                              &data->stats.rx_missed_errors);
 571
 572         /* These three are maintained by software. */
 573         data->tmpstats.rx_fifo_errors = data->stats.rx_fifo_errors;
 574         data->tmpstats.rx_crc_errors = data->stats.rx_crc_errors;
 575
 576         data->tmpstats.tx_aborted_errors =
 577             tsi108_read_stat(data, TSI108_STAT_TXEXDEF,
 578                              TSI108_STAT_CARRY2_TXEXDEF,
 579                              TSI108_STAT_TXEXDEF_CARRY,
 580                              &data->stats.tx_aborted_errors);
 581
 582         data->tmpstats.tx_aborted_errors +=
 583             tsi108_read_stat(data, TSI108_STAT_TXPAUSEDROP,
 584                              TSI108_STAT_CARRY2_TXPAUSE,
 585                              TSI108_STAT_TXPAUSEDROP_CARRY,
 586                              &data->tx_pause_drop);
 587
 588         data->tmpstats.tx_aborted_errors += excol;
 589
 590         data->tmpstats.tx_errors = data->tmpstats.tx_aborted_errors;
 591         data->tmpstats.rx_errors = data->tmpstats.rx_length_errors +
 592             data->tmpstats.rx_crc_errors +
 593             data->tmpstats.rx_frame_errors +
 594             data->tmpstats.rx_fifo_errors + data->tmpstats.rx_missed_errors;
 595
 596         spin_unlock_irq(&data->misclock);
 597         return &data->tmpstats;
 598 }
 599
 600 static void tsi108_restart_rx(struct tsi108_prv_data * data, struct net_device *dev)
 601 {
 602         TSI_WRITE(TSI108_EC_RXQ_PTRHIGH,
 603                              TSI108_EC_RXQ_PTRHIGH_VALID);
 604
 605         TSI_WRITE(TSI108_EC_RXCTRL, TSI108_EC_RXCTRL_GO
 606                              | TSI108_EC_RXCTRL_QUEUE0);
 607 }
 608
 609 static void tsi108_restart_tx(struct tsi108_prv_data * data)
 610 {
 611         TSI_WRITE(TSI108_EC_TXQ_PTRHIGH,
 612                              TSI108_EC_TXQ_PTRHIGH_VALID);
 613
 614         TSI_WRITE(TSI108_EC_TXCTRL, TSI108_EC_TXCTRL_IDLEINT |
 615                              TSI108_EC_TXCTRL_GO | TSI108_EC_TXCTRL_QUEUE0);
 616 }
 617
 618 /* txlock must be held by caller, with IRQs disabled, and
 619  * with permission to re-enable them when the lock is dropped.
 620  */
 621 static void tsi108_complete_tx(struct net_device *dev)
 622 {
 623         struct tsi108_prv_data *data = netdev_priv(dev);
 624         int tx;
 625         struct sk_buff *skb;
 626         int release = 0;
 627
 628         while (!data->txfree || data->txhead != data->txtail) {
 629                 tx = data->txtail;
 630
 631                 if (data->txring[tx].misc & TSI108_TX_OWN)
 632                         break;
 633
 634                 skb = data->txskbs[tx];
 635
 636                 if (!(data->txring[tx].misc & TSI108_TX_OK))
 637                         printk("%s: bad tx packet, misc %x\n",
 638                                dev->name, data->txring[tx].misc);
 639
 640                 data->txtail = (data->txtail + 1) % TSI108_TXRING_LEN;
 641                 data->txfree++;
 642
 643                 if (data->txring[tx].misc & TSI108_TX_EOF) {
 644                         dev_kfree_skb_any(skb);
 645                         release++;
 646                 }
 647         }
 648
 649         if (release) {
 650                 if (is_valid_ether_addr(dev->dev_addr) && data->link_up)
 651                         netif_wake_queue(dev);
 652         }
 653 }
 654
 655 static int tsi108_send_packet(struct sk_buff * skb, struct net_device *dev)
 656 {
 657         struct tsi108_prv_data *data = netdev_priv(dev);
 658         int frags = skb_shinfo(skb)->nr_frags + 1;
 659         int i;
 660
 661         if (!data->phy_ok && net_ratelimit())
 662                 printk(KERN_ERR "%s: Transmit while PHY is down!\n", dev->name);
 663
 664         if (!data->link_up) {
 665                 printk(KERN_ERR "%s: Transmit while link is down!\n",
 666                        dev->name);
 667                 netif_stop_queue(dev);
 668                 return NETDEV_TX_BUSY;
 669         }
 670
 671         if (data->txfree < MAX_SKB_FRAGS + 1) {
 672                 netif_stop_queue(dev);
 673
 674                 if (net_ratelimit())
 675                         printk(KERN_ERR "%s: Transmit with full tx ring!\n",
 676                                dev->name);
 677                 return NETDEV_TX_BUSY;
 678         }
 679
 680         if (data->txfree - frags < MAX_SKB_FRAGS + 1) {
 681                 netif_stop_queue(dev);
 682         }
 683
 684         spin_lock_irq(&data->txlock);
 685
 686         for (i = 0; i < frags; i++) {
 687                 int misc = 0;
 688                 int tx = data->txhead;
 689
 690                 /* This is done to mark every TSI108_TX_INT_FREQ tx buffers with
 691                  * the interrupt bit.  TX descriptor-complete interrupts are
 692                  * enabled when the queue fills up, and masked when there is
 693                  * still free space.  This way, when saturating the outbound
 694                  * link, the tx interrupts are kept to a reasonable level.
 695                  * When the queue is not full, reclamation of skbs still occurs
 696                  * as new packets are transmitted, or on a queue-empty
 697                  * interrupt.
 698                  */
 699
 700                 if ((tx % TSI108_TX_INT_FREQ == 0) &&
 701                     ((TSI108_TXRING_LEN - data->txfree) >= TSI108_TX_INT_FREQ))
 702                         misc = TSI108_TX_INT;
 703
 704                 data->txskbs[tx] = skb;
 705
 706                 if (i == 0) {
 707                         data->txring[tx].buf0 = dma_map_single(NULL, skb->data,
 708                                         skb_headlen(skb), DMA_TO_DEVICE);
 709                         data->txring[tx].len = skb_headlen(skb);
 710                         misc |= TSI108_TX_SOF;
 711                 } else {
 712                         const skb_frag_t *frag = &skb_shinfo(skb)->frags[i - 1];
 713
 714                         data->txring[tx].buf0 = skb_frag_dma_map(NULL, frag,
 715                                                                  0,
 716                                                                  skb_frag_size(frag),
 717                                                                  DMA_TO_DEVICE);
 718                         data->txring[tx].len = skb_frag_size(frag);
 719                 }
 720
 721                 if (i == frags - 1)
 722                         misc |= TSI108_TX_EOF;
 723
 724                 if (netif_msg_pktdata(data)) {
 725                         int i;
 726                         printk("%s: Tx Frame contents (%d)\n", dev->name,
 727                                skb->len);
 728                         for (i = 0; i < skb->len; i++)
 729                                 printk(" %2.2x", skb->data[i]);
 730                         printk(".\n");
 731                 }
 732                 data->txring[tx].misc = misc | TSI108_TX_OWN;
 733
 734                 data->txhead = (data->txhead + 1) % TSI108_TXRING_LEN;
 735                 data->txfree--;
 736         }
 737
 738         tsi108_complete_tx(dev);
 739
 740         /* This must be done after the check for completed tx descriptors,
 741          * so that the tail pointer is correct.
 742          */
 743
 744         if (!(TSI_READ(TSI108_EC_TXSTAT) & TSI108_EC_TXSTAT_QUEUE0))
 745                 tsi108_restart_tx(data);
 746
 747         spin_unlock_irq(&data->txlock);
 748         return NETDEV_TX_OK;
 749 }
 750
 751 static int tsi108_complete_rx(struct net_device *dev, int budget)
 752 {
 753         struct tsi108_prv_data *data = netdev_priv(dev);
 754         int done = 0;
 755
 756         while (data->rxfree && done != budget) {
 757                 int rx = data->rxtail;
 758                 struct sk_buff *skb;
 759
 760                 if (data->rxring[rx].misc & TSI108_RX_OWN)
 761                         break;
 762
 763                 skb = data->rxskbs[rx];
 764                 data->rxtail = (data->rxtail + 1) % TSI108_RXRING_LEN;
 765                 data->rxfree--;
 766                 done++;
 767
 768                 if (data->rxring[rx].misc & TSI108_RX_BAD) {
 769                         spin_lock_irq(&data->misclock);
 770
 771                         if (data->rxring[rx].misc & TSI108_RX_CRC)
 772                                 data->stats.rx_crc_errors++;
 773                         if (data->rxring[rx].misc & TSI108_RX_OVER)
 774                                 data->stats.rx_fifo_errors++;
 775
 776                         spin_unlock_irq(&data->misclock);
 777
 778                         dev_kfree_skb_any(skb);
 779                         continue;
 780                 }
 781                 if (netif_msg_pktdata(data)) {
 782                         int i;
 783                         printk("%s: Rx Frame contents (%d)\n",
 784                                dev->name, data->rxring[rx].len);
 785                         for (i = 0; i < data->rxring[rx].len; i++)
 786                                 printk(" %2.2x", skb->data[i]);
 787                         printk(".\n");
 788                 }
 789
 790                 skb_put(skb, data->rxring[rx].len);
 791                 skb->protocol = eth_type_trans(skb, dev);
 792                 netif_receive_skb(skb);
 793         }
 794
 795         return done;
 796 }
 797
 798 static int tsi108_refill_rx(struct net_device *dev, int budget)
 799 {
 800         struct tsi108_prv_data *data = netdev_priv(dev);
 801         int done = 0;
 802
 803         while (data->rxfree != TSI108_RXRING_LEN && done != budget) {
 804                 int rx = data->rxhead;
 805                 struct sk_buff *skb;
 806
 807                 skb = netdev_alloc_skb_ip_align(dev, TSI108_RXBUF_SIZE);
 808                 data->rxskbs[rx] = skb;
 809                 if (!skb)
 810                         break;
 811
 812                 data->rxring[rx].buf0 = dma_map_single(NULL, skb->data,
 813                                                         TSI108_RX_SKB_SIZE,
 814                                                         DMA_FROM_DEVICE);
 815
 816                 /* Sometimes the hardware sets blen to zero after packet
 817                  * reception, even though the manual says that it's only ever
 818                  * modified by the driver.
 819                  */
 820
 821                 data->rxring[rx].blen = TSI108_RX_SKB_SIZE;
 822                 data->rxring[rx].misc = TSI108_RX_OWN | TSI108_RX_INT;
 823
 824                 data->rxhead = (data->rxhead + 1) % TSI108_RXRING_LEN;
 825                 data->rxfree++;
 826                 done++;
 827         }
 828
 829         if (done != 0 && !(TSI_READ(TSI108_EC_RXSTAT) &
 830                            TSI108_EC_RXSTAT_QUEUE0))
 831                 tsi108_restart_rx(data, dev);
 832
 833         return done;
 834 }
 835
 836 static int tsi108_poll(struct napi_struct *napi, int budget)
 837 {
 838         struct tsi108_prv_data *data = container_of(napi, struct tsi108_prv_data, napi);
 839         struct net_device *dev = data->dev;
 840         u32 estat = TSI_READ(TSI108_EC_RXESTAT);
 841         u32 intstat = TSI_READ(TSI108_EC_INTSTAT);
 842         int num_received = 0, num_filled = 0;
 843
 844         intstat &= TSI108_INT_RXQUEUE0 | TSI108_INT_RXTHRESH |
 845             TSI108_INT_RXOVERRUN | TSI108_INT_RXERROR | TSI108_INT_RXWAIT;
 846
 847         TSI_WRITE(TSI108_EC_RXESTAT, estat);
 848         TSI_WRITE(TSI108_EC_INTSTAT, intstat);
 849
 850         if (data->rxpending || (estat & TSI108_EC_RXESTAT_Q0_DESCINT))
 851                 num_received = tsi108_complete_rx(dev, budget);
 852
 853         /* This should normally fill no more slots than the number of
 854          * packets received in tsi108_complete_rx().  The exception
 855          * is when we previously ran out of memory for RX SKBs.  In that
 856          * case, it's helpful to obey the budget, not only so that the
 857          * CPU isn't hogged, but so that memory (which may still be low)
 858          * is not hogged by one device.
 859          *
 860          * A work unit is considered to be two SKBs to allow us to catch
 861          * up when the ring has shrunk due to out-of-memory but we're
 862          * still removing the full budget's worth of packets each time.
 863          */
 864
 865         if (data->rxfree < TSI108_RXRING_LEN)
 866                 num_filled = tsi108_refill_rx(dev, budget * 2);
 867
 868         if (intstat & TSI108_INT_RXERROR) {
 869                 u32 err = TSI_READ(TSI108_EC_RXERR);
 870                 TSI_WRITE(TSI108_EC_RXERR, err);
 871
 872                 if (err) {
 873                         if (net_ratelimit())
 874                                 printk(KERN_DEBUG "%s: RX error %x\n",
 875                                        dev->name, err);
 876
 877                         if (!(TSI_READ(TSI108_EC_RXSTAT) &
 878                               TSI108_EC_RXSTAT_QUEUE0))
 879                                 tsi108_restart_rx(data, dev);
 880                 }
 881         }
 882
 883         if (intstat & TSI108_INT_RXOVERRUN) {
 884                 spin_lock_irq(&data->misclock);
 885                 data->stats.rx_fifo_errors++;
 886                 spin_unlock_irq(&data->misclock);
 887         }
 888
 889         if (num_received < budget) {
 890                 data->rxpending = 0;
 891                 napi_complete(napi);
 892
 893                 TSI_WRITE(TSI108_EC_INTMASK,
 894                                      TSI_READ(TSI108_EC_INTMASK)
 895                                      & ~(TSI108_INT_RXQUEUE0
 896                                          | TSI108_INT_RXTHRESH |
 897                                          TSI108_INT_RXOVERRUN |
 898                                          TSI108_INT_RXERROR |
 899                                          TSI108_INT_RXWAIT));
 900         } else {
 901                 data->rxpending = 1;
 902         }
 903
 904         return num_received;
 905 }
 906
 907 static void tsi108_rx_int(struct net_device *dev)
 908 {
 909         struct tsi108_prv_data *data = netdev_priv(dev);
 910
 911         /* A race could cause dev to already be scheduled, so it's not an
 912          * error if that happens (and interrupts shouldn't be re-masked,
 913          * because that can cause harmful races, if poll has already
 914          * unmasked them but not cleared LINK_STATE_SCHED).
 915          *
 916          * This can happen if this code races with tsi108_poll(), which masks
 917          * the interrupts after tsi108_irq_one() read the mask, but before
 918          * napi_schedule is called.  It could also happen due to calls
 919          * from tsi108_check_rxring().
 920          */
 921
 922         if (napi_schedule_prep(&data->napi)) {
 923                 /* Mask, rather than ack, the receive interrupts.  The ack
 924                  * will happen in tsi108_poll().
 925                  */
 926
 927                 TSI_WRITE(TSI108_EC_INTMASK,
 928                                      TSI_READ(TSI108_EC_INTMASK) |
 929                                      TSI108_INT_RXQUEUE0
 930                                      | TSI108_INT_RXTHRESH |
 931                                      TSI108_INT_RXOVERRUN | TSI108_INT_RXERROR |
 932                                      TSI108_INT_RXWAIT);
 933                 __napi_schedule(&data->napi);
 934         } else {
 935                 if (!netif_running(dev)) {
 936                         /* This can happen if an interrupt occurs while the
 937                          * interface is being brought down, as the START
 938                          * bit is cleared before the stop function is called.
 939                          *
 940                          * In this case, the interrupts must be masked, or
 941                          * they will continue indefinitely.
 942                          *
 943                          * There's a race here if the interface is brought down
 944                          * and then up in rapid succession, as the device could
 945                          * be made running after the above check and before
 946                          * the masking below.  This will only happen if the IRQ
 947                          * thread has a lower priority than the task brining
 948                          * up the interface.  Fixing this race would likely
 949                          * require changes in generic code.
 950                          */
 951
 952                         TSI_WRITE(TSI108_EC_INTMASK,
 953                                              TSI_READ
 954                                              (TSI108_EC_INTMASK) |
 955                                              TSI108_INT_RXQUEUE0 |
 956                                              TSI108_INT_RXTHRESH |
 957                                              TSI108_INT_RXOVERRUN |
 958                                              TSI108_INT_RXERROR |
 959                                              TSI108_INT_RXWAIT);
 960                 }
 961         }
 962 }
 963
 964 /* If the RX ring has run out of memory, try periodically
 965  * to allocate some more, as otherwise poll would never
 966  * get called (apart from the initial end-of-queue condition).
 967  *
 968  * This is called once per second (by default) from the thread.
 969  */
 970
 971 static void tsi108_check_rxring(struct net_device *dev)
 972 {
 973         struct tsi108_prv_data *data = netdev_priv(dev);
 974
 975         /* A poll is scheduled, as opposed to caling tsi108_refill_rx
 976          * directly, so as to keep the receive path single-threaded
 977          * (and thus not needing a lock).
 978          */
 979
 980         if (netif_running(dev) && data->rxfree < TSI108_RXRING_LEN / 4)
 981                 tsi108_rx_int(dev);
 982 }
 983
 984 static void tsi108_tx_int(struct net_device *dev)
 985 {
 986         struct tsi108_prv_data *data = netdev_priv(dev);
 987         u32 estat = TSI_READ(TSI108_EC_TXESTAT);
 988
 989         TSI_WRITE(TSI108_EC_TXESTAT, estat);
 990         TSI_WRITE(TSI108_EC_INTSTAT, TSI108_INT_TXQUEUE0 |
 991                              TSI108_INT_TXIDLE | TSI108_INT_TXERROR);
 992         if (estat & TSI108_EC_TXESTAT_Q0_ERR) {
 993                 u32 err = TSI_READ(TSI108_EC_TXERR);
 994                 TSI_WRITE(TSI108_EC_TXERR, err);
 995
 996                 if (err && net_ratelimit())
 997                         printk(KERN_ERR "%s: TX error %x\n", dev->name, err);
 998         }
 999
1000         if (estat & (TSI108_EC_TXESTAT_Q0_DESCINT | TSI108_EC_TXESTAT_Q0_EOQ)) {
1001                 spin_lock(&data->txlock);
1002                 tsi108_complete_tx(dev);
1003                 spin_unlock(&data->txlock);
1004         }
1005 }
1006
1007
1008 static irqreturn_t tsi108_irq(int irq, void *dev_id)
1009 {
1010         struct net_device *dev = dev_id;
1011         struct tsi108_prv_data *data = netdev_priv(dev);
1012         u32 stat = TSI_READ(TSI108_EC_INTSTAT);
1013
1014         if (!(stat & TSI108_INT_ANY))
1015                 return IRQ_NONE;        /* Not our interrupt */
1016
1017         stat &= ~TSI_READ(TSI108_EC_INTMASK);
1018
1019         if (stat & (TSI108_INT_TXQUEUE0 | TSI108_INT_TXIDLE |
1020                     TSI108_INT_TXERROR))
1021                 tsi108_tx_int(dev);
1022         if (stat & (TSI108_INT_RXQUEUE0 | TSI108_INT_RXTHRESH |
1023                     TSI108_INT_RXWAIT | TSI108_INT_RXOVERRUN |
1024                     TSI108_INT_RXERROR))
1025                 tsi108_rx_int(dev);
1026
1027         if (stat & TSI108_INT_SFN) {
1028                 if (net_ratelimit())
1029                         printk(KERN_DEBUG "%s: SFN error\n", dev->name);
1030                 TSI_WRITE(TSI108_EC_INTSTAT, TSI108_INT_SFN);
1031         }
1032
1033         if (stat & TSI108_INT_STATCARRY) {
1034                 tsi108_stat_carry(dev);
1035                 TSI_WRITE(TSI108_EC_INTSTAT, TSI108_INT_STATCARRY);
1036         }
1037
1038         return IRQ_HANDLED;
1039 }
1040
1041 static void tsi108_stop_ethernet(struct net_device *dev)
1042 {
1043         struct tsi108_prv_data *data = netdev_priv(dev);
1044         int i = 1000;
1045         /* Disable all TX and RX queues ... */
1046         TSI_WRITE(TSI108_EC_TXCTRL, 0);
1047         TSI_WRITE(TSI108_EC_RXCTRL, 0);
1048
1049         /* ...and wait for them to become idle */
1050         while(i--) {
1051                 if(!(TSI_READ(TSI108_EC_TXSTAT) & TSI108_EC_TXSTAT_ACTIVE))
1052                         break;
1053                 udelay(10);
1054         }
1055         i = 1000;
1056         while(i--){
1057                 if(!(TSI_READ(TSI108_EC_RXSTAT) & TSI108_EC_RXSTAT_ACTIVE))
1058                         return;
1059                 udelay(10);
1060         }
1061         printk(KERN_ERR "%s function time out\n", __func__);
1062 }
1063
1064 static void tsi108_reset_ether(struct tsi108_prv_data * data)
1065 {
1066         TSI_WRITE(TSI108_MAC_CFG1, TSI108_MAC_CFG1_SOFTRST);
1067         udelay(100);
1068         TSI_WRITE(TSI108_MAC_CFG1, 0);
1069
1070         TSI_WRITE(TSI108_EC_PORTCTRL, TSI108_EC_PORTCTRL_STATRST);
1071         udelay(100);
1072         TSI_WRITE(TSI108_EC_PORTCTRL,
1073                              TSI_READ(TSI108_EC_PORTCTRL) &
1074                              ~TSI108_EC_PORTCTRL_STATRST);
1075
1076         TSI_WRITE(TSI108_EC_TXCFG, TSI108_EC_TXCFG_RST);
1077         udelay(100);
1078         TSI_WRITE(TSI108_EC_TXCFG,
1079                              TSI_READ(TSI108_EC_TXCFG) &
1080                              ~TSI108_EC_TXCFG_RST);
1081
1082         TSI_WRITE(TSI108_EC_RXCFG, TSI108_EC_RXCFG_RST);
1083         udelay(100);
1084         TSI_WRITE(TSI108_EC_RXCFG,
1085                              TSI_READ(TSI108_EC_RXCFG) &
1086                              ~TSI108_EC_RXCFG_RST);
1087
1088         TSI_WRITE(TSI108_MAC_MII_MGMT_CFG,
1089                              TSI_READ(TSI108_MAC_MII_MGMT_CFG) |
1090                              TSI108_MAC_MII_MGMT_RST);
1091         udelay(100);
1092         TSI_WRITE(TSI108_MAC_MII_MGMT_CFG,
1093                              (TSI_READ(TSI108_MAC_MII_MGMT_CFG) &
1094                              ~(TSI108_MAC_MII_MGMT_RST |
1095                                TSI108_MAC_MII_MGMT_CLK)) | 0x07);
1096 }
1097
1098 static int tsi108_get_mac(struct net_device *dev)
1099 {
1100         struct tsi108_prv_data *data = netdev_priv(dev);
1101         u32 word1 = TSI_READ(TSI108_MAC_ADDR1);
1102         u32 word2 = TSI_READ(TSI108_MAC_ADDR2);
1103
1104         /* Note that the octets are reversed from what the manual says,
1105          * producing an even weirder ordering...
1106          */
1107         if (word2 == 0 && word1 == 0) {
1108                 dev->dev_addr[0] = 0x00;
1109                 dev->dev_addr[1] = 0x06;
1110                 dev->dev_addr[2] = 0xd2;
1111                 dev->dev_addr[3] = 0x00;
1112                 dev->dev_addr[4] = 0x00;
1113                 if (0x8 == data->phy)
1114                         dev->dev_addr[5] = 0x01;
1115                 else
1116                         dev->dev_addr[5] = 0x02;
1117
1118                 word2 = (dev->dev_addr[0] << 16) | (dev->dev_addr[1] << 24);
1119
1120                 word1 = (dev->dev_addr[2] << 0) | (dev->dev_addr[3] << 8) |
1121                     (dev->dev_addr[4] << 16) | (dev->dev_addr[5] << 24);
1122
1123                 TSI_WRITE(TSI108_MAC_ADDR1, word1);
1124                 TSI_WRITE(TSI108_MAC_ADDR2, word2);
1125         } else {
1126                 dev->dev_addr[0] = (word2 >> 16) & 0xff;
1127                 dev->dev_addr[1] = (word2 >> 24) & 0xff;
1128                 dev->dev_addr[2] = (word1 >> 0) & 0xff;
1129                 dev->dev_addr[3] = (word1 >> 8) & 0xff;
1130                 dev->dev_addr[4] = (word1 >> 16) & 0xff;
1131                 dev->dev_addr[5] = (word1 >> 24) & 0xff;
1132         }
1133
1134         if (!is_valid_ether_addr(dev->dev_addr)) {
1135                 printk(KERN_ERR
1136                        "%s: Invalid MAC address. word1: %08x, word2: %08x\n",
1137                        dev->name, word1, word2);
1138                 return -EINVAL;
1139         }
1140
1141         return 0;
1142 }
1143
1144 static int tsi108_set_mac(struct net_device *dev, void *addr)
1145 {
1146         struct tsi108_prv_data *data = netdev_priv(dev);
1147         u32 word1, word2;
1148         int i;
1149
1150         if (!is_valid_ether_addr(addr))
1151                 return -EINVAL;
1152
1153         for (i = 0; i < 6; i++)
1154                 /* +2 is for the offset of the HW addr type */
1155                 dev->dev_addr[i] = ((unsigned char *)addr)[i + 2];
1156
1157         word2 = (dev->dev_addr[0] << 16) | (dev->dev_addr[1] << 24);
1158
1159         word1 = (dev->dev_addr[2] << 0) | (dev->dev_addr[3] << 8) |
1160             (dev->dev_addr[4] << 16) | (dev->dev_addr[5] << 24);
1161
1162         spin_lock_irq(&data->misclock);
1163         TSI_WRITE(TSI108_MAC_ADDR1, word1);
1164         TSI_WRITE(TSI108_MAC_ADDR2, word2);
1165         spin_lock(&data->txlock);
1166
1167         if (data->txfree && data->link_up)
1168                 netif_wake_queue(dev);
1169
1170         spin_unlock(&data->txlock);
1171         spin_unlock_irq(&data->misclock);
1172         return 0;
1173 }
1174
1175 /* Protected by dev->xmit_lock. */
1176 static void tsi108_set_rx_mode(struct net_device *dev)
1177 {
1178         struct tsi108_prv_data *data = netdev_priv(dev);
1179         u32 rxcfg = TSI_READ(TSI108_EC_RXCFG);
1180
1181         if (dev->flags & IFF_PROMISC) {
1182                 rxcfg &= ~(TSI108_EC_RXCFG_UC_HASH | TSI108_EC_RXCFG_MC_HASH);
1183                 rxcfg |= TSI108_EC_RXCFG_UFE | TSI108_EC_RXCFG_MFE;
1184                 goto out;
1185         }
1186
1187         rxcfg &= ~(TSI108_EC_RXCFG_UFE | TSI108_EC_RXCFG_MFE);
1188
1189         if (dev->flags & IFF_ALLMULTI || !netdev_mc_empty(dev)) {
1190                 int i;
1191                 struct netdev_hw_addr *ha;
1192                 rxcfg |= TSI108_EC_RXCFG_MFE | TSI108_EC_RXCFG_MC_HASH;
1193
1194                 memset(data->mc_hash, 0, sizeof(data->mc_hash));
1195
1196                 netdev_for_each_mc_addr(ha, dev) {
1197                         u32 hash, crc;
1198
1199                         crc = ether_crc(6, ha->addr);
1200                         hash = crc >> 23;
1201                         __set_bit(hash, &data->mc_hash[0]);
1202                 }
1203
1204                 TSI_WRITE(TSI108_EC_HASHADDR,
1205                                      TSI108_EC_HASHADDR_AUTOINC |
1206                                      TSI108_EC_HASHADDR_MCAST);
1207
1208                 for (i = 0; i < 16; i++) {
1209                         /* The manual says that the hardware may drop
1210                          * back-to-back writes to the data register.
1211                          */
1212                         udelay(1);
1213                         TSI_WRITE(TSI108_EC_HASHDATA,
1214                                              data->mc_hash[i]);
1215                 }
1216         }
1217
1218       out:
1219         TSI_WRITE(TSI108_EC_RXCFG, rxcfg);
1220 }
1221
1222 static void tsi108_init_phy(struct net_device *dev)
1223 {
1224         struct tsi108_prv_data *data = netdev_priv(dev);
1225         u32 i = 0;
1226         u16 phyval = 0;
1227         unsigned long flags;
1228
1229         spin_lock_irqsave(&phy_lock, flags);
1230
1231         tsi108_write_mii(data, MII_BMCR, BMCR_RESET);
1232         while (--i) {
1233                 if(!(tsi108_read_mii(data, MII_BMCR) & BMCR_RESET))
1234                         break;
1235                 udelay(10);
1236         }
1237         if (i == 0)
1238                 printk(KERN_ERR "%s function time out\n", __func__);
1239
1240         if (data->phy_type == TSI108_PHY_BCM54XX) {
1241                 tsi108_write_mii(data, 0x09, 0x0300);
1242                 tsi108_write_mii(data, 0x10, 0x1020);
1243                 tsi108_write_mii(data, 0x1c, 0x8c00);
1244         }
1245
1246         tsi108_write_mii(data,
1247                          MII_BMCR,
1248                          BMCR_ANENABLE | BMCR_ANRESTART);
1249         while (tsi108_read_mii(data, MII_BMCR) & BMCR_ANRESTART)
1250                 cpu_relax();
1251
1252         /* Set G/MII mode and receive clock select in TBI control #2.  The
1253          * second port won't work if this isn't done, even though we don't
1254          * use TBI mode.
1255          */
1256
1257         tsi108_write_tbi(data, 0x11, 0x30);
1258
1259         /* FIXME: It seems to take more than 2 back-to-back reads to the
1260          * PHY_STAT register before the link up status bit is set.
1261          */
1262
1263         data->link_up = 0;
1264
1265         while (!((phyval = tsi108_read_mii(data, MII_BMSR)) &
1266                  BMSR_LSTATUS)) {
1267                 if (i++ > (MII_READ_DELAY / 10)) {
1268                         break;
1269                 }
1270                 spin_unlock_irqrestore(&phy_lock, flags);
1271                 msleep(10);
1272                 spin_lock_irqsave(&phy_lock, flags);
1273         }
1274
1275         data->mii_if.supports_gmii = mii_check_gmii_support(&data->mii_if);
1276         printk(KERN_DEBUG "PHY_STAT reg contains %08x\n", phyval);
1277         data->phy_ok = 1;
1278         data->init_media = 1;
1279         spin_unlock_irqrestore(&phy_lock, flags);
1280 }
1281
1282 static void tsi108_kill_phy(struct net_device *dev)
1283 {
1284         struct tsi108_prv_data *data = netdev_priv(dev);
1285         unsigned long flags;
1286
1287         spin_lock_irqsave(&phy_lock, flags);
1288         tsi108_write_mii(data, MII_BMCR, BMCR_PDOWN);
1289         data->phy_ok = 0;
1290         spin_unlock_irqrestore(&phy_lock, flags);
1291 }
1292
1293 static int tsi108_open(struct net_device *dev)
1294 {
1295         int i;
1296         struct tsi108_prv_data *data = netdev_priv(dev);
1297         unsigned int rxring_size = TSI108_RXRING_LEN * sizeof(rx_desc);
1298         unsigned int txring_size = TSI108_TXRING_LEN * sizeof(tx_desc);
1299
1300         i = request_irq(data->irq_num, tsi108_irq, 0, dev->name, dev);
1301         if (i != 0) {
1302                 printk(KERN_ERR "tsi108_eth%d: Could not allocate IRQ%d.\n",
1303                        data->id, data->irq_num);
1304                 return i;
1305         } else {
1306                 dev->irq = data->irq_num;
1307                 printk(KERN_NOTICE
1308                        "tsi108_open : Port %d Assigned IRQ %d to %s\n",
1309                        data->id, dev->irq, dev->name);
1310         }
1311
1312         data->rxring = dma_alloc_coherent(NULL, rxring_size,
1313                         &data->rxdma, GFP_KERNEL);
1314
1315         if (!data->rxring) {
1316                 printk(KERN_DEBUG
1317                        "TSI108_ETH: failed to allocate memory for rxring!\n");
1318                 return -ENOMEM;
1319         } else {
1320                 memset(data->rxring, 0, rxring_size);
1321         }
1322
1323         data->txring = dma_alloc_coherent(NULL, txring_size,
1324                         &data->txdma, GFP_KERNEL);
1325
1326         if (!data->txring) {
1327                 printk(KERN_DEBUG
1328                        "TSI108_ETH: failed to allocate memory for txring!\n");
1329                 pci_free_consistent(0, rxring_size, data->rxring, data->rxdma);
1330                 return -ENOMEM;
1331         } else {
1332                 memset(data->txring, 0, txring_size);
1333         }
1334
1335         for (i = 0; i < TSI108_RXRING_LEN; i++) {
1336                 data->rxring[i].next0 = data->rxdma + (i + 1) * sizeof(rx_desc);
1337                 data->rxring[i].blen = TSI108_RXBUF_SIZE;
1338                 data->rxring[i].vlan = 0;
1339         }
1340
1341         data->rxring[TSI108_RXRING_LEN - 1].next0 = data->rxdma;
1342
1343         data->rxtail = 0;
1344         data->rxhead = 0;
1345
1346         for (i = 0; i < TSI108_RXRING_LEN; i++) {
1347                 struct sk_buff *skb;
1348
1349                 skb = netdev_alloc_skb_ip_align(dev, TSI108_RXBUF_SIZE);
1350                 if (!skb) {
1351                         /* Bah.  No memory for now, but maybe we'll get
1352                          * some more later.
1353                          * For now, we'll live with the smaller ring.
1354                          */
1355                         printk(KERN_WARNING
1356                                "%s: Could only allocate %d receive skb(s).\n",
1357                                dev->name, i);
1358                         data->rxhead = i;
1359                         break;
1360                 }
1361
1362                 data->rxskbs[i] = skb;
1363                 data->rxskbs[i] = skb;
1364                 data->rxring[i].buf0 = virt_to_phys(data->rxskbs[i]->data);
1365                 data->rxring[i].misc = TSI108_RX_OWN | TSI108_RX_INT;
1366         }
1367
1368         data->rxfree = i;
1369         TSI_WRITE(TSI108_EC_RXQ_PTRLOW, data->rxdma);
1370
1371         for (i = 0; i < TSI108_TXRING_LEN; i++) {
1372                 data->txring[i].next0 = data->txdma + (i + 1) * sizeof(tx_desc);
1373                 data->txring[i].misc = 0;
1374         }
1375
1376         data->txring[TSI108_TXRING_LEN - 1].next0 = data->txdma;
1377         data->txtail = 0;
1378         data->txhead = 0;
1379         data->txfree = TSI108_TXRING_LEN;
1380         TSI_WRITE(TSI108_EC_TXQ_PTRLOW, data->txdma);
1381         tsi108_init_phy(dev);
1382
1383         napi_enable(&data->napi);
1384
1385         setup_timer(&data->timer, tsi108_timed_checker, (unsigned long)dev);
1386         mod_timer(&data->timer, jiffies + 1);
1387
1388         tsi108_restart_rx(data, dev);
1389
1390         TSI_WRITE(TSI108_EC_INTSTAT, ~0);
1391
1392         TSI_WRITE(TSI108_EC_INTMASK,
1393                              ~(TSI108_INT_TXQUEUE0 | TSI108_INT_RXERROR |
1394                                TSI108_INT_RXTHRESH | TSI108_INT_RXQUEUE0 |
1395                                TSI108_INT_RXOVERRUN | TSI108_INT_RXWAIT |
1396                                TSI108_INT_SFN | TSI108_INT_STATCARRY));
1397
1398         TSI_WRITE(TSI108_MAC_CFG1,
1399                              TSI108_MAC_CFG1_RXEN | TSI108_MAC_CFG1_TXEN);
1400         netif_start_queue(dev);
1401         return 0;
1402 }
1403
1404 static int tsi108_close(struct net_device *dev)
1405 {
1406         struct tsi108_prv_data *data = netdev_priv(dev);
1407
1408         netif_stop_queue(dev);
1409         napi_disable(&data->napi);
1410
1411         del_timer_sync(&data->timer);
1412
1413         tsi108_stop_ethernet(dev);
1414         tsi108_kill_phy(dev);
1415         TSI_WRITE(TSI108_EC_INTMASK, ~0);
1416         TSI_WRITE(TSI108_MAC_CFG1, 0);
1417
1418         /* Check for any pending TX packets, and drop them. */
1419
1420         while (!data->txfree || data->txhead != data->txtail) {
1421                 int tx = data->txtail;
1422                 struct sk_buff *skb;
1423                 skb = data->txskbs[tx];
1424                 data->txtail = (data->txtail + 1) % TSI108_TXRING_LEN;
1425                 data->txfree++;
1426                 dev_kfree_skb(skb);
1427         }
1428
1429         free_irq(data->irq_num, dev);
1430
1431         /* Discard the RX ring. */
1432
1433         while (data->rxfree) {
1434                 int rx = data->rxtail;
1435                 struct sk_buff *skb;
1436
1437                 skb = data->rxskbs[rx];
1438                 data->rxtail = (data->rxtail + 1) % TSI108_RXRING_LEN;
1439                 data->rxfree--;
1440                 dev_kfree_skb(skb);
1441         }
1442
1443         dma_free_coherent(0,
1444                             TSI108_RXRING_LEN * sizeof(rx_desc),
1445                             data->rxring, data->rxdma);
1446         dma_free_coherent(0,
1447                             TSI108_TXRING_LEN * sizeof(tx_desc),
1448                             data->txring, data->txdma);
1449
1450         return 0;
1451 }
1452
1453 static void tsi108_init_mac(struct net_device *dev)
1454 {
1455         struct tsi108_prv_data *data = netdev_priv(dev);
1456
1457         TSI_WRITE(TSI108_MAC_CFG2, TSI108_MAC_CFG2_DFLT_PREAMBLE |
1458                              TSI108_MAC_CFG2_PADCRC);
1459
1460         TSI_WRITE(TSI108_EC_TXTHRESH,
1461                              (192 << TSI108_EC_TXTHRESH_STARTFILL) |
1462                              (192 << TSI108_EC_TXTHRESH_STOPFILL));
1463
1464         TSI_WRITE(TSI108_STAT_CARRYMASK1,
1465                              ~(TSI108_STAT_CARRY1_RXBYTES |
1466                                TSI108_STAT_CARRY1_RXPKTS |
1467                                TSI108_STAT_CARRY1_RXFCS |
1468                                TSI108_STAT_CARRY1_RXMCAST |
1469                                TSI108_STAT_CARRY1_RXALIGN |
1470                                TSI108_STAT_CARRY1_RXLENGTH |
1471                                TSI108_STAT_CARRY1_RXRUNT |
1472                                TSI108_STAT_CARRY1_RXJUMBO |
1473                                TSI108_STAT_CARRY1_RXFRAG |
1474                                TSI108_STAT_CARRY1_RXJABBER |
1475                                TSI108_STAT_CARRY1_RXDROP));
1476
1477         TSI_WRITE(TSI108_STAT_CARRYMASK2,
1478                              ~(TSI108_STAT_CARRY2_TXBYTES |
1479                                TSI108_STAT_CARRY2_TXPKTS |
1480                                TSI108_STAT_CARRY2_TXEXDEF |
1481                                TSI108_STAT_CARRY2_TXEXCOL |
1482                                TSI108_STAT_CARRY2_TXTCOL |
1483                                TSI108_STAT_CARRY2_TXPAUSE));
1484
1485         TSI_WRITE(TSI108_EC_PORTCTRL, TSI108_EC_PORTCTRL_STATEN);
1486         TSI_WRITE(TSI108_MAC_CFG1, 0);
1487
1488         TSI_WRITE(TSI108_EC_RXCFG,
1489                              TSI108_EC_RXCFG_SE | TSI108_EC_RXCFG_BFE);
1490
1491         TSI_WRITE(TSI108_EC_TXQ_CFG, TSI108_EC_TXQ_CFG_DESC_INT |
1492                              TSI108_EC_TXQ_CFG_EOQ_OWN_INT |
1493                              TSI108_EC_TXQ_CFG_WSWP | (TSI108_PBM_PORT <<
1494                                                 TSI108_EC_TXQ_CFG_SFNPORT));
1495
1496         TSI_WRITE(TSI108_EC_RXQ_CFG, TSI108_EC_RXQ_CFG_DESC_INT |
1497                              TSI108_EC_RXQ_CFG_EOQ_OWN_INT |
1498                              TSI108_EC_RXQ_CFG_WSWP | (TSI108_PBM_PORT <<
1499                                                 TSI108_EC_RXQ_CFG_SFNPORT));
1500
1501         TSI_WRITE(TSI108_EC_TXQ_BUFCFG,
1502                              TSI108_EC_TXQ_BUFCFG_BURST256 |
1503                              TSI108_EC_TXQ_BUFCFG_BSWP | (TSI108_PBM_PORT <<
1504                                                 TSI108_EC_TXQ_BUFCFG_SFNPORT));
1505
1506         TSI_WRITE(TSI108_EC_RXQ_BUFCFG,
1507                              TSI108_EC_RXQ_BUFCFG_BURST256 |
1508                              TSI108_EC_RXQ_BUFCFG_BSWP | (TSI108_PBM_PORT <<
1509                                                 TSI108_EC_RXQ_BUFCFG_SFNPORT));
1510
1511         TSI_WRITE(TSI108_EC_INTMASK, ~0);
1512 }
1513
1514 static int tsi108_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1515 {
1516         struct tsi108_prv_data *data = netdev_priv(dev);
1517         unsigned long flags;
1518         int rc;
1519
1520         spin_lock_irqsave(&data->txlock, flags);
1521         rc = mii_ethtool_gset(&data->mii_if, cmd);
1522         spin_unlock_irqrestore(&data->txlock, flags);
1523
1524         return rc;
1525 }
1526
1527 static int tsi108_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
1528 {
1529         struct tsi108_prv_data *data = netdev_priv(dev);
1530         unsigned long flags;
1531         int rc;
1532
1533         spin_lock_irqsave(&data->txlock, flags);
1534         rc = mii_ethtool_sset(&data->mii_if, cmd);
1535         spin_unlock_irqrestore(&data->txlock, flags);
1536
1537         return rc;
1538 }
1539
1540 static int tsi108_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
1541 {
1542         struct tsi108_prv_data *data = netdev_priv(dev);
1543         if (!netif_running(dev))
1544                 return -EINVAL;
1545         return generic_mii_ioctl(&data->mii_if, if_mii(rq), cmd, NULL);
1546 }
1547
1548 static const struct ethtool_ops tsi108_ethtool_ops = {
1549         .get_link       = ethtool_op_get_link,
1550         .get_settings   = tsi108_get_settings,
1551         .set_settings   = tsi108_set_settings,
1552 };
1553
1554 static const struct net_device_ops tsi108_netdev_ops = {
1555         .ndo_open               = tsi108_open,
1556         .ndo_stop               = tsi108_close,
1557         .ndo_start_xmit         = tsi108_send_packet,
1558         .ndo_set_rx_mode        = tsi108_set_rx_mode,
1559         .ndo_get_stats          = tsi108_get_stats,
1560         .ndo_do_ioctl           = tsi108_do_ioctl,
1561         .ndo_set_mac_address    = tsi108_set_mac,
1562         .ndo_validate_addr      = eth_validate_addr,
1563         .ndo_change_mtu         = eth_change_mtu,
1564 };
1565
1566 static int
1567 tsi108_init_one(struct platform_device *pdev)
1568 {
1569         struct net_device *dev = NULL;
1570         struct tsi108_prv_data *data = NULL;
1571         hw_info *einfo;
1572         int err = 0;
1573
1574         einfo = pdev->dev.platform_data;
1575
1576         if (NULL == einfo) {
1577                 printk(KERN_ERR "tsi-eth %d: Missing additional data!\n",
1578                        pdev->id);
1579                 return -ENODEV;
1580         }
1581
1582         /* Create an ethernet device instance */
1583
1584         dev = alloc_etherdev(sizeof(struct tsi108_prv_data));
1585         if (!dev) {
1586                 printk("tsi108_eth: Could not allocate a device structure\n");
1587                 return -ENOMEM;
1588         }
1589
1590         printk("tsi108_eth%d: probe...\n", pdev->id);
1591         data = netdev_priv(dev);
1592         data->dev = dev;
1593
1594         pr_debug("tsi108_eth%d:regs:phyresgs:phy:irq_num=0x%x:0x%x:0x%x:0x%x\n",
1595                         pdev->id, einfo->regs, einfo->phyregs,
1596                         einfo->phy, einfo->irq_num);
1597
1598         data->regs = ioremap(einfo->regs, 0x400);
1599         if (NULL == data->regs) {
1600                 err = -ENOMEM;
1601                 goto regs_fail;
1602         }
1603
1604         data->phyregs = ioremap(einfo->phyregs, 0x400);
1605         if (NULL == data->phyregs) {
1606                 err = -ENOMEM;
1607                 goto regs_fail;
1608         }
1609 /* MII setup */
1610         data->mii_if.dev = dev;
1611         data->mii_if.mdio_read = tsi108_mdio_read;
1612         data->mii_if.mdio_write = tsi108_mdio_write;
1613         data->mii_if.phy_id = einfo->phy;
1614         data->mii_if.phy_id_mask = 0x1f;
1615         data->mii_if.reg_num_mask = 0x1f;
1616
1617         data->phy = einfo->phy;
1618         data->phy_type = einfo->phy_type;
1619         data->irq_num = einfo->irq_num;
1620         data->id = pdev->id;
1621         netif_napi_add(dev, &data->napi, tsi108_poll, 64);
1622         dev->netdev_ops = &tsi108_netdev_ops;
1623         dev->ethtool_ops = &tsi108_ethtool_ops;
1624
1625         /* Apparently, the Linux networking code won't use scatter-gather
1626          * if the hardware doesn't do checksums.  However, it's faster
1627          * to checksum in place and use SG, as (among other reasons)
1628          * the cache won't be dirtied (which then has to be flushed
1629          * before DMA).  The checksumming is done by the driver (via
1630          * a new function skb_csum_dev() in net/core/skbuff.c).
1631          */
1632
1633         dev->features = NETIF_F_HIGHDMA;
1634
1635         spin_lock_init(&data->txlock);
1636         spin_lock_init(&data->misclock);
1637
1638         tsi108_reset_ether(data);
1639         tsi108_kill_phy(dev);
1640
1641         if ((err = tsi108_get_mac(dev)) != 0) {
1642                 printk(KERN_ERR "%s: Invalid MAC address.  Please correct.\n",
1643                        dev->name);
1644                 goto register_fail;
1645         }
1646
1647         tsi108_init_mac(dev);
1648         err = register_netdev(dev);
1649         if (err) {
1650                 printk(KERN_ERR "%s: Cannot register net device, aborting.\n",
1651                                 dev->name);
1652                 goto register_fail;
1653         }
1654
1655         platform_set_drvdata(pdev, dev);
1656         printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: %pM\n",
1657                dev->name, dev->dev_addr);
1658 #ifdef DEBUG
1659         data->msg_enable = DEBUG;
1660         dump_eth_one(dev);
1661 #endif
1662
1663         return 0;
1664
1665 register_fail:
1666         iounmap(data->regs);
1667         iounmap(data->phyregs);
1668
1669 regs_fail:
1670         free_netdev(dev);
1671         return err;
1672 }
1673
1674 /* There's no way to either get interrupts from the PHY when
1675  * something changes, or to have the Tsi108 automatically communicate
1676  * with the PHY to reconfigure itself.
1677  *
1678  * Thus, we have to do it using a timer.
1679  */
1680
1681 static void tsi108_timed_checker(unsigned long dev_ptr)
1682 {
1683         struct net_device *dev = (struct net_device *)dev_ptr;
1684         struct tsi108_prv_data *data = netdev_priv(dev);
1685
1686         tsi108_check_phy(dev);
1687         tsi108_check_rxring(dev);
1688         mod_timer(&data->timer, jiffies + CHECK_PHY_INTERVAL);
1689 }
1690
1691 static int tsi108_ether_init(void)
1692 {
1693         int ret;
1694         ret = platform_driver_register (&tsi_eth_driver);
1695         if (ret < 0){
1696                 printk("tsi108_ether_init: error initializing ethernet "
1697                        "device\n");
1698                 return ret;
1699         }
1700         return 0;
1701 }
1702
1703 static int tsi108_ether_remove(struct platform_device *pdev)
1704 {
1705         struct net_device *dev = platform_get_drvdata(pdev);
1706         struct tsi108_prv_data *priv = netdev_priv(dev);
1707
1708         unregister_netdev(dev);
1709         tsi108_stop_ethernet(dev);
1710         platform_set_drvdata(pdev, NULL);
1711         iounmap(priv->regs);
1712         iounmap(priv->phyregs);
1713         free_netdev(dev);
1714
1715         return 0;
1716 }
1717 static void tsi108_ether_exit(void)
1718 {
1719         platform_driver_unregister(&tsi_eth_driver);
1720 }
1721
1722 module_init(tsi108_ether_init);
1723 module_exit(tsi108_ether_exit);
1724
1725 MODULE_AUTHOR("Tundra Semiconductor Corporation");
1726 MODULE_DESCRIPTION("Tsi108 Gigabit Ethernet driver");
1727 MODULE_LICENSE("GPL");
1728 MODULE_ALIAS("platform:tsi-ethernet");