drivers/net/e1000e/netdev.c

   1 /*******************************************************************************
   2
   3   Intel PRO/1000 Linux driver
   4   Copyright(c) 1999 - 2008 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   Linux NICS <linux.nics@intel.com>
  24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27 *******************************************************************************/
  28
  29 #include <linux/module.h>
  30 #include <linux/types.h>
  31 #include <linux/init.h>
  32 #include <linux/pci.h>
  33 #include <linux/vmalloc.h>
  34 #include <linux/pagemap.h>
  35 #include <linux/delay.h>
  36 #include <linux/netdevice.h>
  37 #include <linux/tcp.h>
  38 #include <linux/ipv6.h>
  39 #include <net/checksum.h>
  40 #include <net/ip6_checksum.h>
  41 #include <linux/mii.h>
  42 #include <linux/ethtool.h>
  43 #include <linux/if_vlan.h>
  44 #include <linux/cpu.h>
  45 #include <linux/smp.h>
  46 #include <linux/pm_qos_params.h>
  47
  48 #include "e1000.h"
  49
  50 #define DRV_VERSION "0.3.3.3-k2"
  51 char e1000e_driver_name[] = "e1000e";
  52 const char e1000e_driver_version[] = DRV_VERSION;
  53
  54 static const struct e1000_info *e1000_info_tbl[] = {
  55         [board_82571]           = &e1000_82571_info,
  56         [board_82572]           = &e1000_82572_info,
  57         [board_82573]           = &e1000_82573_info,
  58         [board_80003es2lan]     = &e1000_es2_info,
  59         [board_ich8lan]         = &e1000_ich8_info,
  60         [board_ich9lan]         = &e1000_ich9_info,
  61 };
  62
  63 #ifdef DEBUG
  64 /**
  65  * e1000_get_hw_dev_name - return device name string
  66  * used by hardware layer to print debugging information
  67  **/
  68 char *e1000e_get_hw_dev_name(struct e1000_hw *hw)
  69 {
  70         return hw->adapter->netdev->name;
  71 }
  72 #endif
  73
  74 /**
  75  * e1000_desc_unused - calculate if we have unused descriptors
  76  **/
  77 static int e1000_desc_unused(struct e1000_ring *ring)
  78 {
  79         if (ring->next_to_clean > ring->next_to_use)
  80                 return ring->next_to_clean - ring->next_to_use - 1;
  81
  82         return ring->count + ring->next_to_clean - ring->next_to_use - 1;
  83 }
  84
  85 /**
  86  * e1000_receive_skb - helper function to handle Rx indications
  87  * @adapter: board private structure
  88  * @status: descriptor status field as written by hardware
  89  * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
  90  * @skb: pointer to sk_buff to be indicated to stack
  91  **/
  92 static void e1000_receive_skb(struct e1000_adapter *adapter,
  93                               struct net_device *netdev,
  94                               struct sk_buff *skb,
  95                               u8 status, __le16 vlan)
  96 {
  97         skb->protocol = eth_type_trans(skb, netdev);
  98
  99         if (adapter->vlgrp && (status & E1000_RXD_STAT_VP))
 100                 vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
 101                                          le16_to_cpu(vlan));
 102         else
 103                 netif_receive_skb(skb);
 104
 105         netdev->last_rx = jiffies;
 106 }
 107
 108 /**
 109  * e1000_rx_checksum - Receive Checksum Offload for 82543
 110  * @adapter:     board private structure
 111  * @status_err:  receive descriptor status and error fields
 112  * @csum:       receive descriptor csum field
 113  * @sk_buff:     socket buffer with received data
 114  **/
 115 static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
 116                               u32 csum, struct sk_buff *skb)
 117 {
 118         u16 status = (u16)status_err;
 119         u8 errors = (u8)(status_err >> 24);
 120         skb->ip_summed = CHECKSUM_NONE;
 121
 122         /* Ignore Checksum bit is set */
 123         if (status & E1000_RXD_STAT_IXSM)
 124                 return;
 125         /* TCP/UDP checksum error bit is set */
 126         if (errors & E1000_RXD_ERR_TCPE) {
 127                 /* let the stack verify checksum errors */
 128                 adapter->hw_csum_err++;
 129                 return;
 130         }
 131
 132         /* TCP/UDP Checksum has not been calculated */
 133         if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
 134                 return;
 135
 136         /* It must be a TCP or UDP packet with a valid checksum */
 137         if (status & E1000_RXD_STAT_TCPCS) {
 138                 /* TCP checksum is good */
 139                 skb->ip_summed = CHECKSUM_UNNECESSARY;
 140         } else {
 141                 /*
 142                  * IP fragment with UDP payload
 143                  * Hardware complements the payload checksum, so we undo it
 144                  * and then put the value in host order for further stack use.
 145                  */
 146                 __sum16 sum = (__force __sum16)htons(csum);
 147                 skb->csum = csum_unfold(~sum);
 148                 skb->ip_summed = CHECKSUM_COMPLETE;
 149         }
 150         adapter->hw_csum_good++;
 151 }
 152
 153 /**
 154  * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
 155  * @adapter: address of board private structure
 156  **/
 157 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
 158                                    int cleaned_count)
 159 {
 160         struct net_device *netdev = adapter->netdev;
 161         struct pci_dev *pdev = adapter->pdev;
 162         struct e1000_ring *rx_ring = adapter->rx_ring;
 163         struct e1000_rx_desc *rx_desc;
 164         struct e1000_buffer *buffer_info;
 165         struct sk_buff *skb;
 166         unsigned int i;
 167         unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
 168
 169         i = rx_ring->next_to_use;
 170         buffer_info = &rx_ring->buffer_info[i];
 171
 172         while (cleaned_count--) {
 173                 skb = buffer_info->skb;
 174                 if (skb) {
 175                         skb_trim(skb, 0);
 176                         goto map_skb;
 177                 }
 178
 179                 skb = netdev_alloc_skb(netdev, bufsz);
 180                 if (!skb) {
 181                         /* Better luck next round */
 182                         adapter->alloc_rx_buff_failed++;
 183                         break;
 184                 }
 185
 186                 /*
 187                  * Make buffer alignment 2 beyond a 16 byte boundary
 188                  * this will result in a 16 byte aligned IP header after
 189                  * the 14 byte MAC header is removed
 190                  */
 191                 skb_reserve(skb, NET_IP_ALIGN);
 192
 193                 buffer_info->skb = skb;
 194 map_skb:
 195                 buffer_info->dma = pci_map_single(pdev, skb->data,
 196                                                   adapter->rx_buffer_len,
 197                                                   PCI_DMA_FROMDEVICE);
 198                 if (pci_dma_mapping_error(buffer_info->dma)) {
 199                         dev_err(&pdev->dev, "RX DMA map failed\n");
 200                         adapter->rx_dma_failed++;
 201                         break;
 202                 }
 203
 204                 rx_desc = E1000_RX_DESC(*rx_ring, i);
 205                 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
 206
 207                 i++;
 208                 if (i == rx_ring->count)
 209                         i = 0;
 210                 buffer_info = &rx_ring->buffer_info[i];
 211         }
 212
 213         if (rx_ring->next_to_use != i) {
 214                 rx_ring->next_to_use = i;
 215                 if (i-- == 0)
 216                         i = (rx_ring->count - 1);
 217
 218                 /*
 219                  * Force memory writes to complete before letting h/w
 220                  * know there are new descriptors to fetch.  (Only
 221                  * applicable for weak-ordered memory model archs,
 222                  * such as IA-64).
 223                  */
 224                 wmb();
 225                 writel(i, adapter->hw.hw_addr + rx_ring->tail);
 226         }
 227 }
 228
 229 /**
 230  * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
 231  * @adapter: address of board private structure
 232  **/
 233 static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
 234                                       int cleaned_count)
 235 {
 236         struct net_device *netdev = adapter->netdev;
 237         struct pci_dev *pdev = adapter->pdev;
 238         union e1000_rx_desc_packet_split *rx_desc;
 239         struct e1000_ring *rx_ring = adapter->rx_ring;
 240         struct e1000_buffer *buffer_info;
 241         struct e1000_ps_page *ps_page;
 242         struct sk_buff *skb;
 243         unsigned int i, j;
 244
 245         i = rx_ring->next_to_use;
 246         buffer_info = &rx_ring->buffer_info[i];
 247
 248         while (cleaned_count--) {
 249                 rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
 250
 251                 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
 252                         ps_page = &buffer_info->ps_pages[j];
 253                         if (j >= adapter->rx_ps_pages) {
 254                                 /* all unused desc entries get hw null ptr */
 255                                 rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0);
 256                                 continue;
 257                         }
 258                         if (!ps_page->page) {
 259                                 ps_page->page = alloc_page(GFP_ATOMIC);
 260                                 if (!ps_page->page) {
 261                                         adapter->alloc_rx_buff_failed++;
 262                                         goto no_buffers;
 263                                 }
 264                                 ps_page->dma = pci_map_page(pdev,
 265                                                    ps_page->page,
 266                                                    0, PAGE_SIZE,
 267                                                    PCI_DMA_FROMDEVICE);
 268                                 if (pci_dma_mapping_error(ps_page->dma)) {
 269                                         dev_err(&adapter->pdev->dev,
 270                                           "RX DMA page map failed\n");
 271                                         adapter->rx_dma_failed++;
 272                                         goto no_buffers;
 273                                 }
 274                         }
 275                         /*
 276                          * Refresh the desc even if buffer_addrs
 277                          * didn't change because each write-back
 278                          * erases this info.
 279                          */
 280                         rx_desc->read.buffer_addr[j+1] =
 281                              cpu_to_le64(ps_page->dma);
 282                 }
 283
 284                 skb = netdev_alloc_skb(netdev,
 285                                        adapter->rx_ps_bsize0 + NET_IP_ALIGN);
 286
 287                 if (!skb) {
 288                         adapter->alloc_rx_buff_failed++;
 289                         break;
 290                 }
 291
 292                 /*
 293                  * Make buffer alignment 2 beyond a 16 byte boundary
 294                  * this will result in a 16 byte aligned IP header after
 295                  * the 14 byte MAC header is removed
 296                  */
 297                 skb_reserve(skb, NET_IP_ALIGN);
 298
 299                 buffer_info->skb = skb;
 300                 buffer_info->dma = pci_map_single(pdev, skb->data,
 301                                                   adapter->rx_ps_bsize0,
 302                                                   PCI_DMA_FROMDEVICE);
 303                 if (pci_dma_mapping_error(buffer_info->dma)) {
 304                         dev_err(&pdev->dev, "RX DMA map failed\n");
 305                         adapter->rx_dma_failed++;
 306                         /* cleanup skb */
 307                         dev_kfree_skb_any(skb);
 308                         buffer_info->skb = NULL;
 309                         break;
 310                 }
 311
 312                 rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
 313
 314                 i++;
 315                 if (i == rx_ring->count)
 316                         i = 0;
 317                 buffer_info = &rx_ring->buffer_info[i];
 318         }
 319
 320 no_buffers:
 321         if (rx_ring->next_to_use != i) {
 322                 rx_ring->next_to_use = i;
 323
 324                 if (!(i--))
 325                         i = (rx_ring->count - 1);
 326
 327                 /*
 328                  * Force memory writes to complete before letting h/w
 329                  * know there are new descriptors to fetch.  (Only
 330                  * applicable for weak-ordered memory model archs,
 331                  * such as IA-64).
 332                  */
 333                 wmb();
 334                 /*
 335                  * Hardware increments by 16 bytes, but packet split
 336                  * descriptors are 32 bytes...so we increment tail
 337                  * twice as much.
 338                  */
 339                 writel(i<<1, adapter->hw.hw_addr + rx_ring->tail);
 340         }
 341 }
 342
 343 /**
 344  * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
 345  * @adapter: address of board private structure
 346  * @rx_ring: pointer to receive ring structure
 347  * @cleaned_count: number of buffers to allocate this pass
 348  **/
 349
 350 static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
 351                                          int cleaned_count)
 352 {
 353         struct net_device *netdev = adapter->netdev;
 354         struct pci_dev *pdev = adapter->pdev;
 355         struct e1000_rx_desc *rx_desc;
 356         struct e1000_ring *rx_ring = adapter->rx_ring;
 357         struct e1000_buffer *buffer_info;
 358         struct sk_buff *skb;
 359         unsigned int i;
 360         unsigned int bufsz = 256 -
 361                              16 /* for skb_reserve */ -
 362                              NET_IP_ALIGN;
 363
 364         i = rx_ring->next_to_use;
 365         buffer_info = &rx_ring->buffer_info[i];
 366
 367         while (cleaned_count--) {
 368                 skb = buffer_info->skb;
 369                 if (skb) {
 370                         skb_trim(skb, 0);
 371                         goto check_page;
 372                 }
 373
 374                 skb = netdev_alloc_skb(netdev, bufsz);
 375                 if (unlikely(!skb)) {
 376                         /* Better luck next round */
 377                         adapter->alloc_rx_buff_failed++;
 378                         break;
 379                 }
 380
 381                 /* Make buffer alignment 2 beyond a 16 byte boundary
 382                  * this will result in a 16 byte aligned IP header after
 383                  * the 14 byte MAC header is removed
 384                  */
 385                 skb_reserve(skb, NET_IP_ALIGN);
 386
 387                 buffer_info->skb = skb;
 388 check_page:
 389                 /* allocate a new page if necessary */
 390                 if (!buffer_info->page) {
 391                         buffer_info->page = alloc_page(GFP_ATOMIC);
 392                         if (unlikely(!buffer_info->page)) {
 393                                 adapter->alloc_rx_buff_failed++;
 394                                 break;
 395                         }
 396                 }
 397
 398                 if (!buffer_info->dma)
 399                         buffer_info->dma = pci_map_page(pdev,
 400                                                         buffer_info->page, 0,
 401                                                         PAGE_SIZE,
 402                                                         PCI_DMA_FROMDEVICE);
 403
 404                 rx_desc = E1000_RX_DESC(*rx_ring, i);
 405                 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
 406
 407                 if (unlikely(++i == rx_ring->count))
 408                         i = 0;
 409                 buffer_info = &rx_ring->buffer_info[i];
 410         }
 411
 412         if (likely(rx_ring->next_to_use != i)) {
 413                 rx_ring->next_to_use = i;
 414                 if (unlikely(i-- == 0))
 415                         i = (rx_ring->count - 1);
 416
 417                 /* Force memory writes to complete before letting h/w
 418                  * know there are new descriptors to fetch.  (Only
 419                  * applicable for weak-ordered memory model archs,
 420                  * such as IA-64). */
 421                 wmb();
 422                 writel(i, adapter->hw.hw_addr + rx_ring->tail);
 423         }
 424 }
 425
 426 /**
 427  * e1000_clean_rx_irq - Send received data up the network stack; legacy
 428  * @adapter: board private structure
 429  *
 430  * the return value indicates whether actual cleaning was done, there
 431  * is no guarantee that everything was cleaned
 432  **/
 433 static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 434                                int *work_done, int work_to_do)
 435 {
 436         struct net_device *netdev = adapter->netdev;
 437         struct pci_dev *pdev = adapter->pdev;
 438         struct e1000_ring *rx_ring = adapter->rx_ring;
 439         struct e1000_rx_desc *rx_desc, *next_rxd;
 440         struct e1000_buffer *buffer_info, *next_buffer;
 441         u32 length;
 442         unsigned int i;
 443         int cleaned_count = 0;
 444         bool cleaned = 0;
 445         unsigned int total_rx_bytes = 0, total_rx_packets = 0;
 446
 447         i = rx_ring->next_to_clean;
 448         rx_desc = E1000_RX_DESC(*rx_ring, i);
 449         buffer_info = &rx_ring->buffer_info[i];
 450
 451         while (rx_desc->status & E1000_RXD_STAT_DD) {
 452                 struct sk_buff *skb;
 453                 u8 status;
 454
 455                 if (*work_done >= work_to_do)
 456                         break;
 457                 (*work_done)++;
 458
 459                 status = rx_desc->status;
 460                 skb = buffer_info->skb;
 461                 buffer_info->skb = NULL;
 462
 463                 prefetch(skb->data - NET_IP_ALIGN);
 464
 465                 i++;
 466                 if (i == rx_ring->count)
 467                         i = 0;
 468                 next_rxd = E1000_RX_DESC(*rx_ring, i);
 469                 prefetch(next_rxd);
 470
 471                 next_buffer = &rx_ring->buffer_info[i];
 472
 473                 cleaned = 1;
 474                 cleaned_count++;
 475                 pci_unmap_single(pdev,
 476                                  buffer_info->dma,
 477                                  adapter->rx_buffer_len,
 478                                  PCI_DMA_FROMDEVICE);
 479                 buffer_info->dma = 0;
 480
 481                 length = le16_to_cpu(rx_desc->length);
 482
 483                 /* !EOP means multiple descriptors were used to store a single
 484                  * packet, also make sure the frame isn't just CRC only */
 485                 if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) {
 486                         /* All receives must fit into a single buffer */
 487                         ndev_dbg(netdev, "%s: Receive packet consumed "
 488                                  "multiple buffers\n", netdev->name);
 489                         /* recycle */
 490                         buffer_info->skb = skb;
 491                         goto next_desc;
 492                 }
 493
 494                 if (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK) {
 495                         /* recycle */
 496                         buffer_info->skb = skb;
 497                         goto next_desc;
 498                 }
 499
 500                 total_rx_bytes += length;
 501                 total_rx_packets++;
 502
 503                 /*
 504                  * code added for copybreak, this should improve
 505                  * performance for small packets with large amounts
 506                  * of reassembly being done in the stack
 507                  */
 508                 if (length < copybreak) {
 509                         struct sk_buff *new_skb =
 510                             netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
 511                         if (new_skb) {
 512                                 skb_reserve(new_skb, NET_IP_ALIGN);
 513                                 memcpy(new_skb->data - NET_IP_ALIGN,
 514                                        skb->data - NET_IP_ALIGN,
 515                                        length + NET_IP_ALIGN);
 516                                 /* save the skb in buffer_info as good */
 517                                 buffer_info->skb = skb;
 518                                 skb = new_skb;
 519                         }
 520                         /* else just continue with the old one */
 521                 }
 522                 /* end copybreak code */
 523                 skb_put(skb, length);
 524
 525                 /* Receive Checksum Offload */
 526                 e1000_rx_checksum(adapter,
 527                                   (u32)(status) |
 528                                   ((u32)(rx_desc->errors) << 24),
 529                                   le16_to_cpu(rx_desc->csum), skb);
 530
 531                 e1000_receive_skb(adapter, netdev, skb,status,rx_desc->special);
 532
 533 next_desc:
 534                 rx_desc->status = 0;
 535
 536                 /* return some buffers to hardware, one at a time is too slow */
 537                 if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
 538                         adapter->alloc_rx_buf(adapter, cleaned_count);
 539                         cleaned_count = 0;
 540                 }
 541
 542                 /* use prefetched values */
 543                 rx_desc = next_rxd;
 544                 buffer_info = next_buffer;
 545         }
 546         rx_ring->next_to_clean = i;
 547
 548         cleaned_count = e1000_desc_unused(rx_ring);
 549         if (cleaned_count)
 550                 adapter->alloc_rx_buf(adapter, cleaned_count);
 551
 552         adapter->total_rx_bytes += total_rx_bytes;
 553         adapter->total_rx_packets += total_rx_packets;
 554         adapter->net_stats.rx_bytes += total_rx_bytes;
 555         adapter->net_stats.rx_packets += total_rx_packets;
 556         return cleaned;
 557 }
 558
 559 static void e1000_put_txbuf(struct e1000_adapter *adapter,
 560                              struct e1000_buffer *buffer_info)
 561 {
 562         if (buffer_info->dma) {
 563                 pci_unmap_page(adapter->pdev, buffer_info->dma,
 564                                buffer_info->length, PCI_DMA_TODEVICE);
 565                 buffer_info->dma = 0;
 566         }
 567         if (buffer_info->skb) {
 568                 dev_kfree_skb_any(buffer_info->skb);
 569                 buffer_info->skb = NULL;
 570         }
 571 }
 572
 573 static void e1000_print_tx_hang(struct e1000_adapter *adapter)
 574 {
 575         struct e1000_ring *tx_ring = adapter->tx_ring;
 576         unsigned int i = tx_ring->next_to_clean;
 577         unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
 578         struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
 579         struct net_device *netdev = adapter->netdev;
 580
 581         /* detected Tx unit hang */
 582         ndev_err(netdev,
 583                  "Detected Tx Unit Hang:\n"
 584                  "  TDH                  <%x>\n"
 585                  "  TDT                  <%x>\n"
 586                  "  next_to_use          <%x>\n"
 587                  "  next_to_clean        <%x>\n"
 588                  "buffer_info[next_to_clean]:\n"
 589                  "  time_stamp           <%lx>\n"
 590                  "  next_to_watch        <%x>\n"
 591                  "  jiffies              <%lx>\n"
 592                  "  next_to_watch.status <%x>\n",
 593                  readl(adapter->hw.hw_addr + tx_ring->head),
 594                  readl(adapter->hw.hw_addr + tx_ring->tail),
 595                  tx_ring->next_to_use,
 596                  tx_ring->next_to_clean,
 597                  tx_ring->buffer_info[eop].time_stamp,
 598                  eop,
 599                  jiffies,
 600                  eop_desc->upper.fields.status);
 601 }
 602
 603 /**
 604  * e1000_clean_tx_irq - Reclaim resources after transmit completes
 605  * @adapter: board private structure
 606  *
 607  * the return value indicates whether actual cleaning was done, there
 608  * is no guarantee that everything was cleaned
 609  **/
 610 static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
 611 {
 612         struct net_device *netdev = adapter->netdev;
 613         struct e1000_hw *hw = &adapter->hw;
 614         struct e1000_ring *tx_ring = adapter->tx_ring;
 615         struct e1000_tx_desc *tx_desc, *eop_desc;
 616         struct e1000_buffer *buffer_info;
 617         unsigned int i, eop;
 618         unsigned int count = 0;
 619         bool cleaned = 0;
 620         unsigned int total_tx_bytes = 0, total_tx_packets = 0;
 621
 622         i = tx_ring->next_to_clean;
 623         eop = tx_ring->buffer_info[i].next_to_watch;
 624         eop_desc = E1000_TX_DESC(*tx_ring, eop);
 625
 626         while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
 627                 for (cleaned = 0; !cleaned; ) {
 628                         tx_desc = E1000_TX_DESC(*tx_ring, i);
 629                         buffer_info = &tx_ring->buffer_info[i];
 630                         cleaned = (i == eop);
 631
 632                         if (cleaned) {
 633                                 struct sk_buff *skb = buffer_info->skb;
 634                                 unsigned int segs, bytecount;
 635                                 segs = skb_shinfo(skb)->gso_segs ?: 1;
 636                                 /* multiply data chunks by size of headers */
 637                                 bytecount = ((segs - 1) * skb_headlen(skb)) +
 638                                             skb->len;
 639                                 total_tx_packets += segs;
 640                                 total_tx_bytes += bytecount;
 641                         }
 642
 643                         e1000_put_txbuf(adapter, buffer_info);
 644                         tx_desc->upper.data = 0;
 645
 646                         i++;
 647                         if (i == tx_ring->count)
 648                                 i = 0;
 649                 }
 650
 651                 eop = tx_ring->buffer_info[i].next_to_watch;
 652                 eop_desc = E1000_TX_DESC(*tx_ring, eop);
 653 #define E1000_TX_WEIGHT 64
 654                 /* weight of a sort for tx, to avoid endless transmit cleanup */
 655                 if (count++ == E1000_TX_WEIGHT)
 656                         break;
 657         }
 658
 659         tx_ring->next_to_clean = i;
 660
 661 #define TX_WAKE_THRESHOLD 32
 662         if (cleaned && netif_carrier_ok(netdev) &&
 663                      e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
 664                 /* Make sure that anybody stopping the queue after this
 665                  * sees the new next_to_clean.
 666                  */
 667                 smp_mb();
 668
 669                 if (netif_queue_stopped(netdev) &&
 670                     !(test_bit(__E1000_DOWN, &adapter->state))) {
 671                         netif_wake_queue(netdev);
 672                         ++adapter->restart_queue;
 673                 }
 674         }
 675
 676         if (adapter->detect_tx_hung) {
 677                 /*
 678                  * Detect a transmit hang in hardware, this serializes the
 679                  * check with the clearing of time_stamp and movement of i
 680                  */
 681                 adapter->detect_tx_hung = 0;
 682                 if (tx_ring->buffer_info[eop].dma &&
 683                     time_after(jiffies, tx_ring->buffer_info[eop].time_stamp
 684                                + (adapter->tx_timeout_factor * HZ))
 685                     && !(er32(STATUS) & E1000_STATUS_TXOFF)) {
 686                         e1000_print_tx_hang(adapter);
 687                         netif_stop_queue(netdev);
 688                 }
 689         }
 690         adapter->total_tx_bytes += total_tx_bytes;
 691         adapter->total_tx_packets += total_tx_packets;
 692         adapter->net_stats.tx_bytes += total_tx_bytes;
 693         adapter->net_stats.tx_packets += total_tx_packets;
 694         return cleaned;
 695 }
 696
 697 /**
 698  * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
 699  * @adapter: board private structure
 700  *
 701  * the return value indicates whether actual cleaning was done, there
 702  * is no guarantee that everything was cleaned
 703  **/
 704 static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 705                                   int *work_done, int work_to_do)
 706 {
 707         union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
 708         struct net_device *netdev = adapter->netdev;
 709         struct pci_dev *pdev = adapter->pdev;
 710         struct e1000_ring *rx_ring = adapter->rx_ring;
 711         struct e1000_buffer *buffer_info, *next_buffer;
 712         struct e1000_ps_page *ps_page;
 713         struct sk_buff *skb;
 714         unsigned int i, j;
 715         u32 length, staterr;
 716         int cleaned_count = 0;
 717         bool cleaned = 0;
 718         unsigned int total_rx_bytes = 0, total_rx_packets = 0;
 719
 720         i = rx_ring->next_to_clean;
 721         rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
 722         staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
 723         buffer_info = &rx_ring->buffer_info[i];
 724
 725         while (staterr & E1000_RXD_STAT_DD) {
 726                 if (*work_done >= work_to_do)
 727                         break;
 728                 (*work_done)++;
 729                 skb = buffer_info->skb;
 730
 731                 /* in the packet split case this is header only */
 732                 prefetch(skb->data - NET_IP_ALIGN);
 733
 734                 i++;
 735                 if (i == rx_ring->count)
 736                         i = 0;
 737                 next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
 738                 prefetch(next_rxd);
 739
 740                 next_buffer = &rx_ring->buffer_info[i];
 741
 742                 cleaned = 1;
 743                 cleaned_count++;
 744                 pci_unmap_single(pdev, buffer_info->dma,
 745                                  adapter->rx_ps_bsize0,
 746                                  PCI_DMA_FROMDEVICE);
 747                 buffer_info->dma = 0;
 748
 749                 if (!(staterr & E1000_RXD_STAT_EOP)) {
 750                         ndev_dbg(netdev, "%s: Packet Split buffers didn't pick "
 751                                  "up the full packet\n", netdev->name);
 752                         dev_kfree_skb_irq(skb);
 753                         goto next_desc;
 754                 }
 755
 756                 if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
 757                         dev_kfree_skb_irq(skb);
 758                         goto next_desc;
 759                 }
 760
 761                 length = le16_to_cpu(rx_desc->wb.middle.length0);
 762
 763                 if (!length) {
 764                         ndev_dbg(netdev, "%s: Last part of the packet spanning"
 765                                  " multiple descriptors\n", netdev->name);
 766                         dev_kfree_skb_irq(skb);
 767                         goto next_desc;
 768                 }
 769
 770                 /* Good Receive */
 771                 skb_put(skb, length);
 772
 773                 {
 774                 /*
 775                  * this looks ugly, but it seems compiler issues make it
 776                  * more efficient than reusing j
 777                  */
 778                 int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
 779
 780                 /*
 781                  * page alloc/put takes too long and effects small packet
 782                  * throughput, so unsplit small packets and save the alloc/put
 783                  * only valid in softirq (napi) context to call kmap_*
 784                  */
 785                 if (l1 && (l1 <= copybreak) &&
 786                     ((length + l1) <= adapter->rx_ps_bsize0)) {
 787                         u8 *vaddr;
 788
 789                         ps_page = &buffer_info->ps_pages[0];
 790
 791                         /*
 792                          * there is no documentation about how to call
 793                          * kmap_atomic, so we can't hold the mapping
 794                          * very long
 795                          */
 796                         pci_dma_sync_single_for_cpu(pdev, ps_page->dma,
 797                                 PAGE_SIZE, PCI_DMA_FROMDEVICE);
 798                         vaddr = kmap_atomic(ps_page->page, KM_SKB_DATA_SOFTIRQ);
 799                         memcpy(skb_tail_pointer(skb), vaddr, l1);
 800                         kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
 801                         pci_dma_sync_single_for_device(pdev, ps_page->dma,
 802                                 PAGE_SIZE, PCI_DMA_FROMDEVICE);
 803
 804                         skb_put(skb, l1);
 805                         goto copydone;
 806                 } /* if */
 807                 }
 808
 809                 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
 810                         length = le16_to_cpu(rx_desc->wb.upper.length[j]);
 811                         if (!length)
 812                                 break;
 813
 814                         ps_page = &buffer_info->ps_pages[j];
 815                         pci_unmap_page(pdev, ps_page->dma, PAGE_SIZE,
 816                                        PCI_DMA_FROMDEVICE);
 817                         ps_page->dma = 0;
 818                         skb_fill_page_desc(skb, j, ps_page->page, 0, length);
 819                         ps_page->page = NULL;
 820                         skb->len += length;
 821                         skb->data_len += length;
 822                         skb->truesize += length;
 823                 }
 824
 825 copydone:
 826                 total_rx_bytes += skb->len;
 827                 total_rx_packets++;
 828
 829                 e1000_rx_checksum(adapter, staterr, le16_to_cpu(
 830                         rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
 831
 832                 if (rx_desc->wb.upper.header_status &
 833                            cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
 834                         adapter->rx_hdr_split++;
 835
 836                 e1000_receive_skb(adapter, netdev, skb,
 837                                   staterr, rx_desc->wb.middle.vlan);
 838
 839 next_desc:
 840                 rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
 841                 buffer_info->skb = NULL;
 842
 843                 /* return some buffers to hardware, one at a time is too slow */
 844                 if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
 845                         adapter->alloc_rx_buf(adapter, cleaned_count);
 846                         cleaned_count = 0;
 847                 }
 848
 849                 /* use prefetched values */
 850                 rx_desc = next_rxd;
 851                 buffer_info = next_buffer;
 852
 853                 staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
 854         }
 855         rx_ring->next_to_clean = i;
 856
 857         cleaned_count = e1000_desc_unused(rx_ring);
 858         if (cleaned_count)
 859                 adapter->alloc_rx_buf(adapter, cleaned_count);
 860
 861         adapter->total_rx_bytes += total_rx_bytes;
 862         adapter->total_rx_packets += total_rx_packets;
 863         adapter->net_stats.rx_bytes += total_rx_bytes;
 864         adapter->net_stats.rx_packets += total_rx_packets;
 865         return cleaned;
 866 }
 867
 868 /**
 869  * e1000_consume_page - helper function
 870  **/
 871 static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
 872                                u16 length)
 873 {
 874         bi->page = NULL;
 875         skb->len += length;
 876         skb->data_len += length;
 877         skb->truesize += length;
 878 }
 879
 880 /**
 881  * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
 882  * @adapter: board private structure
 883  *
 884  * the return value indicates whether actual cleaning was done, there
 885  * is no guarantee that everything was cleaned
 886  **/
 887
 888 static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
 889                                      int *work_done, int work_to_do)
 890 {
 891         struct net_device *netdev = adapter->netdev;
 892         struct pci_dev *pdev = adapter->pdev;
 893         struct e1000_ring *rx_ring = adapter->rx_ring;
 894         struct e1000_rx_desc *rx_desc, *next_rxd;
 895         struct e1000_buffer *buffer_info, *next_buffer;
 896         u32 length;
 897         unsigned int i;
 898         int cleaned_count = 0;
 899         bool cleaned = false;
 900         unsigned int total_rx_bytes=0, total_rx_packets=0;
 901
 902         i = rx_ring->next_to_clean;
 903         rx_desc = E1000_RX_DESC(*rx_ring, i);
 904         buffer_info = &rx_ring->buffer_info[i];
 905
 906         while (rx_desc->status & E1000_RXD_STAT_DD) {
 907                 struct sk_buff *skb;
 908                 u8 status;
 909
 910                 if (*work_done >= work_to_do)
 911                         break;
 912                 (*work_done)++;
 913
 914                 status = rx_desc->status;
 915                 skb = buffer_info->skb;
 916                 buffer_info->skb = NULL;
 917
 918                 ++i;
 919                 if (i == rx_ring->count)
 920                         i = 0;
 921                 next_rxd = E1000_RX_DESC(*rx_ring, i);
 922                 prefetch(next_rxd);
 923
 924                 next_buffer = &rx_ring->buffer_info[i];
 925
 926                 cleaned = true;
 927                 cleaned_count++;
 928                 pci_unmap_page(pdev, buffer_info->dma, PAGE_SIZE,
 929                                PCI_DMA_FROMDEVICE);
 930                 buffer_info->dma = 0;
 931
 932                 length = le16_to_cpu(rx_desc->length);
 933
 934                 /* errors is only valid for DD + EOP descriptors */
 935                 if (unlikely((status & E1000_RXD_STAT_EOP) &&
 936                     (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) {
 937                                 /* recycle both page and skb */
 938                                 buffer_info->skb = skb;
 939                                 /* an error means any chain goes out the window
 940                                  * too */
 941                                 if (rx_ring->rx_skb_top)
 942                                         dev_kfree_skb(rx_ring->rx_skb_top);
 943                                 rx_ring->rx_skb_top = NULL;
 944                                 goto next_desc;
 945                 }
 946
 947 #define rxtop rx_ring->rx_skb_top
 948                 if (!(status & E1000_RXD_STAT_EOP)) {
 949                         /* this descriptor is only the beginning (or middle) */
 950                         if (!rxtop) {
 951                                 /* this is the beginning of a chain */
 952                                 rxtop = skb;
 953                                 skb_fill_page_desc(rxtop, 0, buffer_info->page,
 954                                                    0, length);
 955                         } else {
 956                                 /* this is the middle of a chain */
 957                                 skb_fill_page_desc(rxtop,
 958                                     skb_shinfo(rxtop)->nr_frags,
 959                                     buffer_info->page, 0, length);
 960                                 /* re-use the skb, only consumed the page */
 961                                 buffer_info->skb = skb;
 962                         }
 963                         e1000_consume_page(buffer_info, rxtop, length);
 964                         goto next_desc;
 965                 } else {
 966                         if (rxtop) {
 967                                 /* end of the chain */
 968                                 skb_fill_page_desc(rxtop,
 969                                     skb_shinfo(rxtop)->nr_frags,
 970                                     buffer_info->page, 0, length);
 971                                 /* re-use the current skb, we only consumed the
 972                                  * page */
 973                                 buffer_info->skb = skb;
 974                                 skb = rxtop;
 975                                 rxtop = NULL;
 976                                 e1000_consume_page(buffer_info, skb, length);
 977                         } else {
 978                                 /* no chain, got EOP, this buf is the packet
 979                                  * copybreak to save the put_page/alloc_page */
 980                                 if (length <= copybreak &&
 981                                     skb_tailroom(skb) >= length) {
 982                                         u8 *vaddr;
 983                                         vaddr = kmap_atomic(buffer_info->page,
 984                                                            KM_SKB_DATA_SOFTIRQ);
 985                                         memcpy(skb_tail_pointer(skb), vaddr,
 986                                                length);
 987                                         kunmap_atomic(vaddr,
 988                                                       KM_SKB_DATA_SOFTIRQ);
 989                                         /* re-use the page, so don't erase
 990                                          * buffer_info->page */
 991                                         skb_put(skb, length);
 992                                 } else {
 993                                         skb_fill_page_desc(skb, 0,
 994                                                            buffer_info->page, 0,
 995                                                            length);
 996                                         e1000_consume_page(buffer_info, skb,
 997                                                            length);
 998                                 }
 999                         }
1000                 }
1001
1002                 /* Receive Checksum Offload XXX recompute due to CRC strip? */
1003                 e1000_rx_checksum(adapter,
1004                                   (u32)(status) |
1005                                   ((u32)(rx_desc->errors) << 24),
1006                                   le16_to_cpu(rx_desc->csum), skb);
1007
1008                 /* probably a little skewed due to removing CRC */
1009                 total_rx_bytes += skb->len;
1010                 total_rx_packets++;
1011
1012                 /* eth type trans needs skb->data to point to something */
1013                 if (!pskb_may_pull(skb, ETH_HLEN)) {
1014                         ndev_err(netdev, "pskb_may_pull failed.\n");
1015                         dev_kfree_skb(skb);
1016                         goto next_desc;
1017                 }
1018
1019                 e1000_receive_skb(adapter, netdev, skb, status,
1020                                   rx_desc->special);
1021
1022 next_desc:
1023                 rx_desc->status = 0;
1024
1025                 /* return some buffers to hardware, one at a time is too slow */
1026                 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
1027                         adapter->alloc_rx_buf(adapter, cleaned_count);
1028                         cleaned_count = 0;
1029                 }
1030
1031                 /* use prefetched values */
1032                 rx_desc = next_rxd;
1033                 buffer_info = next_buffer;
1034         }
1035         rx_ring->next_to_clean = i;
1036
1037         cleaned_count = e1000_desc_unused(rx_ring);
1038         if (cleaned_count)
1039                 adapter->alloc_rx_buf(adapter, cleaned_count);
1040
1041         adapter->total_rx_bytes += total_rx_bytes;
1042         adapter->total_rx_packets += total_rx_packets;
1043         adapter->net_stats.rx_bytes += total_rx_bytes;
1044         adapter->net_stats.rx_packets += total_rx_packets;
1045         return cleaned;
1046 }
1047
1048 /**
1049  * e1000_clean_rx_ring - Free Rx Buffers per Queue
1050  * @adapter: board private structure
1051  **/
1052 static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
1053 {
1054         struct e1000_ring *rx_ring = adapter->rx_ring;
1055         struct e1000_buffer *buffer_info;
1056         struct e1000_ps_page *ps_page;
1057         struct pci_dev *pdev = adapter->pdev;
1058         unsigned int i, j;
1059
1060         /* Free all the Rx ring sk_buffs */
1061         for (i = 0; i < rx_ring->count; i++) {
1062                 buffer_info = &rx_ring->buffer_info[i];
1063                 if (buffer_info->dma) {
1064                         if (adapter->clean_rx == e1000_clean_rx_irq)
1065                                 pci_unmap_single(pdev, buffer_info->dma,
1066                                                  adapter->rx_buffer_len,
1067                                                  PCI_DMA_FROMDEVICE);
1068                         else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
1069                                 pci_unmap_page(pdev, buffer_info->dma,
1070                                                PAGE_SIZE,
1071                                                PCI_DMA_FROMDEVICE);
1072                         else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
1073                                 pci_unmap_single(pdev, buffer_info->dma,
1074                                                  adapter->rx_ps_bsize0,
1075                                                  PCI_DMA_FROMDEVICE);
1076                         buffer_info->dma = 0;
1077                 }
1078
1079                 if (buffer_info->page) {
1080                         put_page(buffer_info->page);
1081                         buffer_info->page = NULL;
1082                 }
1083
1084                 if (buffer_info->skb) {
1085                         dev_kfree_skb(buffer_info->skb);
1086                         buffer_info->skb = NULL;
1087                 }
1088
1089                 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
1090                         ps_page = &buffer_info->ps_pages[j];
1091                         if (!ps_page->page)
1092                                 break;
1093                         pci_unmap_page(pdev, ps_page->dma, PAGE_SIZE,
1094                                        PCI_DMA_FROMDEVICE);
1095                         ps_page->dma = 0;
1096                         put_page(ps_page->page);
1097                         ps_page->page = NULL;
1098                 }
1099         }
1100
1101         /* there also may be some cached data from a chained receive */
1102         if (rx_ring->rx_skb_top) {
1103                 dev_kfree_skb(rx_ring->rx_skb_top);
1104                 rx_ring->rx_skb_top = NULL;
1105         }
1106
1107         /* Zero out the descriptor ring */
1108         memset(rx_ring->desc, 0, rx_ring->size);
1109
1110         rx_ring->next_to_clean = 0;
1111         rx_ring->next_to_use = 0;
1112
1113         writel(0, adapter->hw.hw_addr + rx_ring->head);
1114         writel(0, adapter->hw.hw_addr + rx_ring->tail);
1115 }
1116
1117 /**
1118  * e1000_intr_msi - Interrupt Handler
1119  * @irq: interrupt number
1120  * @data: pointer to a network interface device structure
1121  **/
1122 static irqreturn_t e1000_intr_msi(int irq, void *data)
1123 {
1124         struct net_device *netdev = data;
1125         struct e1000_adapter *adapter = netdev_priv(netdev);
1126         struct e1000_hw *hw = &adapter->hw;
1127         u32 icr = er32(ICR);
1128
1129         /*
1130          * read ICR disables interrupts using IAM
1131          */
1132
1133         if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
1134                 hw->mac.get_link_status = 1;
1135                 /*
1136                  * ICH8 workaround-- Call gig speed drop workaround on cable
1137                  * disconnect (LSC) before accessing any PHY registers
1138                  */
1139                 if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
1140                     (!(er32(STATUS) & E1000_STATUS_LU)))
1141                         e1000e_gig_downshift_workaround_ich8lan(hw);
1142
1143                 /*
1144                  * 80003ES2LAN workaround-- For packet buffer work-around on
1145                  * link down event; disable receives here in the ISR and reset
1146                  * adapter in watchdog
1147                  */
1148                 if (netif_carrier_ok(netdev) &&
1149                     adapter->flags & FLAG_RX_NEEDS_RESTART) {
1150                         /* disable receives */
1151                         u32 rctl = er32(RCTL);
1152                         ew32(RCTL, rctl & ~E1000_RCTL_EN);
1153                         adapter->flags |= FLAG_RX_RESTART_NOW;
1154                 }
1155                 /* guard against interrupt when we're going down */
1156                 if (!test_bit(__E1000_DOWN, &adapter->state))
1157                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
1158         }
1159
1160         if (netif_rx_schedule_prep(netdev, &adapter->napi)) {
1161                 adapter->total_tx_bytes = 0;
1162                 adapter->total_tx_packets = 0;
1163                 adapter->total_rx_bytes = 0;
1164                 adapter->total_rx_packets = 0;
1165                 __netif_rx_schedule(netdev, &adapter->napi);
1166         }
1167
1168         return IRQ_HANDLED;
1169 }
1170
1171 /**
1172  * e1000_intr - Interrupt Handler
1173  * @irq: interrupt number
1174  * @data: pointer to a network interface device structure
1175  **/
1176 static irqreturn_t e1000_intr(int irq, void *data)
1177 {
1178         struct net_device *netdev = data;
1179         struct e1000_adapter *adapter = netdev_priv(netdev);
1180         struct e1000_hw *hw = &adapter->hw;
1181
1182         u32 rctl, icr = er32(ICR);
1183         if (!icr)
1184                 return IRQ_NONE;  /* Not our interrupt */
1185
1186         /*
1187          * IMS will not auto-mask if INT_ASSERTED is not set, and if it is
1188          * not set, then the adapter didn't send an interrupt
1189          */
1190         if (!(icr & E1000_ICR_INT_ASSERTED))
1191                 return IRQ_NONE;
1192
1193         /*
1194          * Interrupt Auto-Mask...upon reading ICR,
1195          * interrupts are masked.  No need for the
1196          * IMC write
1197          */
1198
1199         if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
1200                 hw->mac.get_link_status = 1;
1201                 /*
1202                  * ICH8 workaround-- Call gig speed drop workaround on cable
1203                  * disconnect (LSC) before accessing any PHY registers
1204                  */
1205                 if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
1206                     (!(er32(STATUS) & E1000_STATUS_LU)))
1207                         e1000e_gig_downshift_workaround_ich8lan(hw);
1208
1209                 /*
1210                  * 80003ES2LAN workaround--
1211                  * For packet buffer work-around on link down event;
1212                  * disable receives here in the ISR and
1213                  * reset adapter in watchdog
1214                  */
1215                 if (netif_carrier_ok(netdev) &&
1216                     (adapter->flags & FLAG_RX_NEEDS_RESTART)) {
1217                         /* disable receives */
1218                         rctl = er32(RCTL);
1219                         ew32(RCTL, rctl & ~E1000_RCTL_EN);
1220                         adapter->flags |= FLAG_RX_RESTART_NOW;
1221                 }
1222                 /* guard against interrupt when we're going down */
1223                 if (!test_bit(__E1000_DOWN, &adapter->state))
1224                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
1225         }
1226
1227         if (netif_rx_schedule_prep(netdev, &adapter->napi)) {
1228                 adapter->total_tx_bytes = 0;
1229                 adapter->total_tx_packets = 0;
1230                 adapter->total_rx_bytes = 0;
1231                 adapter->total_rx_packets = 0;
1232                 __netif_rx_schedule(netdev, &adapter->napi);
1233         }
1234
1235         return IRQ_HANDLED;
1236 }
1237
1238 static int e1000_request_irq(struct e1000_adapter *adapter)
1239 {
1240         struct net_device *netdev = adapter->netdev;
1241         irq_handler_t handler = e1000_intr;
1242         int irq_flags = IRQF_SHARED;
1243         int err;
1244
1245         if (!pci_enable_msi(adapter->pdev)) {
1246                 adapter->flags |= FLAG_MSI_ENABLED;
1247                 handler = e1000_intr_msi;
1248                 irq_flags = 0;
1249         }
1250
1251         err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
1252                           netdev);
1253         if (err) {
1254                 ndev_err(netdev,
1255                        "Unable to allocate %s interrupt (return: %d)\n",
1256                         adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx",
1257                         err);
1258                 if (adapter->flags & FLAG_MSI_ENABLED)
1259                         pci_disable_msi(adapter->pdev);
1260         }
1261
1262         return err;
1263 }
1264
1265 static void e1000_free_irq(struct e1000_adapter *adapter)
1266 {
1267         struct net_device *netdev = adapter->netdev;
1268
1269         free_irq(adapter->pdev->irq, netdev);
1270         if (adapter->flags & FLAG_MSI_ENABLED) {
1271                 pci_disable_msi(adapter->pdev);
1272                 adapter->flags &= ~FLAG_MSI_ENABLED;
1273         }
1274 }
1275
1276 /**
1277  * e1000_irq_disable - Mask off interrupt generation on the NIC
1278  **/
1279 static void e1000_irq_disable(struct e1000_adapter *adapter)
1280 {
1281         struct e1000_hw *hw = &adapter->hw;
1282
1283         ew32(IMC, ~0);
1284         e1e_flush();
1285         synchronize_irq(adapter->pdev->irq);
1286 }
1287
1288 /**
1289  * e1000_irq_enable - Enable default interrupt generation settings
1290  **/
1291 static void e1000_irq_enable(struct e1000_adapter *adapter)
1292 {
1293         struct e1000_hw *hw = &adapter->hw;
1294
1295         ew32(IMS, IMS_ENABLE_MASK);
1296         e1e_flush();
1297 }
1298
1299 /**
1300  * e1000_get_hw_control - get control of the h/w from f/w
1301  * @adapter: address of board private structure
1302  *
1303  * e1000_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
1304  * For ASF and Pass Through versions of f/w this means that
1305  * the driver is loaded. For AMT version (only with 82573)
1306  * of the f/w this means that the network i/f is open.
1307  **/
1308 static void e1000_get_hw_control(struct e1000_adapter *adapter)
1309 {
1310         struct e1000_hw *hw = &adapter->hw;
1311         u32 ctrl_ext;
1312         u32 swsm;
1313
1314         /* Let firmware know the driver has taken over */
1315         if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
1316                 swsm = er32(SWSM);
1317                 ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
1318         } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
1319                 ctrl_ext = er32(CTRL_EXT);
1320                 ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
1321         }
1322 }
1323
1324 /**
1325  * e1000_release_hw_control - release control of the h/w to f/w
1326  * @adapter: address of board private structure
1327  *
1328  * e1000_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
1329  * For ASF and Pass Through versions of f/w this means that the
1330  * driver is no longer loaded. For AMT version (only with 82573) i
1331  * of the f/w this means that the network i/f is closed.
1332  *
1333  **/
1334 static void e1000_release_hw_control(struct e1000_adapter *adapter)
1335 {
1336         struct e1000_hw *hw = &adapter->hw;
1337         u32 ctrl_ext;
1338         u32 swsm;
1339
1340         /* Let firmware taken over control of h/w */
1341         if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
1342                 swsm = er32(SWSM);
1343                 ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
1344         } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
1345                 ctrl_ext = er32(CTRL_EXT);
1346                 ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
1347         }
1348 }
1349
1350 /**
1351  * @e1000_alloc_ring - allocate memory for a ring structure
1352  **/
1353 static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
1354                                 struct e1000_ring *ring)
1355 {
1356         struct pci_dev *pdev = adapter->pdev;
1357
1358         ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma,
1359                                         GFP_KERNEL);
1360         if (!ring->desc)
1361                 return -ENOMEM;
1362
1363         return 0;
1364 }
1365
1366 /**
1367  * e1000e_setup_tx_resources - allocate Tx resources (Descriptors)
1368  * @adapter: board private structure
1369  *
1370  * Return 0 on success, negative on failure
1371  **/
1372 int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
1373 {
1374         struct e1000_ring *tx_ring = adapter->tx_ring;
1375         int err = -ENOMEM, size;
1376
1377         size = sizeof(struct e1000_buffer) * tx_ring->count;
1378         tx_ring->buffer_info = vmalloc(size);
1379         if (!tx_ring->buffer_info)
1380                 goto err;
1381         memset(tx_ring->buffer_info, 0, size);
1382
1383         /* round up to nearest 4K */
1384         tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
1385         tx_ring->size = ALIGN(tx_ring->size, 4096);
1386
1387         err = e1000_alloc_ring_dma(adapter, tx_ring);
1388         if (err)
1389                 goto err;
1390
1391         tx_ring->next_to_use = 0;
1392         tx_ring->next_to_clean = 0;
1393         spin_lock_init(&adapter->tx_queue_lock);
1394
1395         return 0;
1396 err:
1397         vfree(tx_ring->buffer_info);
1398         ndev_err(adapter->netdev,
1399         "Unable to allocate memory for the transmit descriptor ring\n");
1400         return err;
1401 }
1402
1403 /**
1404  * e1000e_setup_rx_resources - allocate Rx resources (Descriptors)
1405  * @adapter: board private structure
1406  *
1407  * Returns 0 on success, negative on failure
1408  **/
1409 int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
1410 {
1411         struct e1000_ring *rx_ring = adapter->rx_ring;
1412         struct e1000_buffer *buffer_info;
1413         int i, size, desc_len, err = -ENOMEM;
1414
1415         size = sizeof(struct e1000_buffer) * rx_ring->count;
1416         rx_ring->buffer_info = vmalloc(size);
1417         if (!rx_ring->buffer_info)
1418                 goto err;
1419         memset(rx_ring->buffer_info, 0, size);
1420
1421         for (i = 0; i < rx_ring->count; i++) {
1422                 buffer_info = &rx_ring->buffer_info[i];
1423                 buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS,
1424                                                 sizeof(struct e1000_ps_page),
1425                                                 GFP_KERNEL);
1426                 if (!buffer_info->ps_pages)
1427                         goto err_pages;
1428         }
1429
1430         desc_len = sizeof(union e1000_rx_desc_packet_split);
1431
1432         /* Round up to nearest 4K */
1433         rx_ring->size = rx_ring->count * desc_len;
1434         rx_ring->size = ALIGN(rx_ring->size, 4096);
1435
1436         err = e1000_alloc_ring_dma(adapter, rx_ring);
1437         if (err)
1438                 goto err_pages;
1439
1440         rx_ring->next_to_clean = 0;
1441         rx_ring->next_to_use = 0;
1442         rx_ring->rx_skb_top = NULL;
1443
1444         return 0;
1445
1446 err_pages:
1447         for (i = 0; i < rx_ring->count; i++) {
1448                 buffer_info = &rx_ring->buffer_info[i];
1449                 kfree(buffer_info->ps_pages);
1450         }
1451 err:
1452         vfree(rx_ring->buffer_info);
1453         ndev_err(adapter->netdev,
1454         "Unable to allocate memory for the transmit descriptor ring\n");
1455         return err;
1456 }
1457
1458 /**
1459  * e1000_clean_tx_ring - Free Tx Buffers
1460  * @adapter: board private structure
1461  **/
1462 static void e1000_clean_tx_ring(struct e1000_adapter *adapter)
1463 {
1464         struct e1000_ring *tx_ring = adapter->tx_ring;
1465         struct e1000_buffer *buffer_info;
1466         unsigned long size;
1467         unsigned int i;
1468
1469         for (i = 0; i < tx_ring->count; i++) {
1470                 buffer_info = &tx_ring->buffer_info[i];
1471                 e1000_put_txbuf(adapter, buffer_info);
1472         }
1473
1474         size = sizeof(struct e1000_buffer) * tx_ring->count;
1475         memset(tx_ring->buffer_info, 0, size);
1476
1477         memset(tx_ring->desc, 0, tx_ring->size);
1478
1479         tx_ring->next_to_use = 0;
1480         tx_ring->next_to_clean = 0;
1481
1482         writel(0, adapter->hw.hw_addr + tx_ring->head);
1483         writel(0, adapter->hw.hw_addr + tx_ring->tail);
1484 }
1485
1486 /**
1487  * e1000e_free_tx_resources - Free Tx Resources per Queue
1488  * @adapter: board private structure
1489  *
1490  * Free all transmit software resources
1491  **/
1492 void e1000e_free_tx_resources(struct e1000_adapter *adapter)
1493 {
1494         struct pci_dev *pdev = adapter->pdev;
1495         struct e1000_ring *tx_ring = adapter->tx_ring;
1496
1497         e1000_clean_tx_ring(adapter);
1498
1499         vfree(tx_ring->buffer_info);
1500         tx_ring->buffer_info = NULL;
1501
1502         dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
1503                           tx_ring->dma);
1504         tx_ring->desc = NULL;
1505 }
1506
1507 /**
1508  * e1000e_free_rx_resources - Free Rx Resources
1509  * @adapter: board private structure
1510  *
1511  * Free all receive software resources
1512  **/
1513
1514 void e1000e_free_rx_resources(struct e1000_adapter *adapter)
1515 {
1516         struct pci_dev *pdev = adapter->pdev;
1517         struct e1000_ring *rx_ring = adapter->rx_ring;
1518         int i;
1519
1520         e1000_clean_rx_ring(adapter);
1521
1522         for (i = 0; i < rx_ring->count; i++) {
1523                 kfree(rx_ring->buffer_info[i].ps_pages);
1524         }
1525
1526         vfree(rx_ring->buffer_info);
1527         rx_ring->buffer_info = NULL;
1528
1529         dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
1530                           rx_ring->dma);
1531         rx_ring->desc = NULL;
1532 }
1533
1534 /**
1535  * e1000_update_itr - update the dynamic ITR value based on statistics
1536  * @adapter: pointer to adapter
1537  * @itr_setting: current adapter->itr
1538  * @packets: the number of packets during this measurement interval
1539  * @bytes: the number of bytes during this measurement interval
1540  *
1541  *      Stores a new ITR value based on packets and byte
1542  *      counts during the last interrupt.  The advantage of per interrupt
1543  *      computation is faster updates and more accurate ITR for the current
1544  *      traffic pattern.  Constants in this function were computed
1545  *      based on theoretical maximum wire speed and thresholds were set based
1546  *      on testing data as well as attempting to minimize response time
1547  *      while increasing bulk throughput.
1548  *      this functionality is controlled by the InterruptThrottleRate module
1549  *      parameter (see e1000_param.c)
1550  **/
1551 static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
1552                                      u16 itr_setting, int packets,
1553                                      int bytes)
1554 {
1555         unsigned int retval = itr_setting;
1556
1557         if (packets == 0)
1558                 goto update_itr_done;
1559
1560         switch (itr_setting) {
1561         case lowest_latency:
1562                 /* handle TSO and jumbo frames */
1563                 if (bytes/packets > 8000)
1564                         retval = bulk_latency;
1565                 else if ((packets < 5) && (bytes > 512)) {
1566                         retval = low_latency;
1567                 }
1568                 break;
1569         case low_latency:  /* 50 usec aka 20000 ints/s */
1570                 if (bytes > 10000) {
1571                         /* this if handles the TSO accounting */
1572                         if (bytes/packets > 8000) {
1573                                 retval = bulk_latency;
1574                         } else if ((packets < 10) || ((bytes/packets) > 1200)) {
1575                                 retval = bulk_latency;
1576                         } else if ((packets > 35)) {
1577                                 retval = lowest_latency;
1578                         }
1579                 } else if (bytes/packets > 2000) {
1580                         retval = bulk_latency;
1581                 } else if (packets <= 2 && bytes < 512) {
1582                         retval = lowest_latency;
1583                 }
1584                 break;
1585         case bulk_latency: /* 250 usec aka 4000 ints/s */
1586                 if (bytes > 25000) {
1587                         if (packets > 35) {
1588                                 retval = low_latency;
1589                         }
1590                 } else if (bytes < 6000) {
1591                         retval = low_latency;
1592                 }
1593                 break;
1594         }
1595
1596 update_itr_done:
1597         return retval;
1598 }
1599
1600 static void e1000_set_itr(struct e1000_adapter *adapter)
1601 {
1602         struct e1000_hw *hw = &adapter->hw;
1603         u16 current_itr;
1604         u32 new_itr = adapter->itr;
1605
1606         /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
1607         if (adapter->link_speed != SPEED_1000) {
1608                 current_itr = 0;
1609                 new_itr = 4000;
1610                 goto set_itr_now;
1611         }
1612
1613         adapter->tx_itr = e1000_update_itr(adapter,
1614                                     adapter->tx_itr,
1615                                     adapter->total_tx_packets,
1616                                     adapter->total_tx_bytes);
1617         /* conservative mode (itr 3) eliminates the lowest_latency setting */
1618         if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
1619                 adapter->tx_itr = low_latency;
1620
1621         adapter->rx_itr = e1000_update_itr(adapter,
1622                                     adapter->rx_itr,
1623                                     adapter->total_rx_packets,
1624                                     adapter->total_rx_bytes);
1625         /* conservative mode (itr 3) eliminates the lowest_latency setting */
1626         if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
1627                 adapter->rx_itr = low_latency;
1628
1629         current_itr = max(adapter->rx_itr, adapter->tx_itr);
1630
1631         switch (current_itr) {
1632         /* counts and packets in update_itr are dependent on these numbers */
1633         case lowest_latency:
1634                 new_itr = 70000;
1635                 break;
1636         case low_latency:
1637                 new_itr = 20000; /* aka hwitr = ~200 */
1638                 break;
1639         case bulk_latency:
1640                 new_itr = 4000;
1641                 break;
1642         default:
1643                 break;
1644         }
1645
1646 set_itr_now:
1647         if (new_itr != adapter->itr) {
1648                 /*
1649                  * this attempts to bias the interrupt rate towards Bulk
1650                  * by adding intermediate steps when interrupt rate is
1651                  * increasing
1652                  */
1653                 new_itr = new_itr > adapter->itr ?
1654                              min(adapter->itr + (new_itr >> 2), new_itr) :
1655                              new_itr;
1656                 adapter->itr = new_itr;
1657                 ew32(ITR, 1000000000 / (new_itr * 256));
1658         }
1659 }
1660
1661 /**
1662  * e1000_clean - NAPI Rx polling callback
1663  * @napi: struct associated with this polling callback
1664  * @budget: amount of packets driver is allowed to process this poll
1665  **/
1666 static int e1000_clean(struct napi_struct *napi, int budget)
1667 {
1668         struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
1669         struct net_device *poll_dev = adapter->netdev;
1670         int tx_cleaned = 0, work_done = 0;
1671
1672         /* Must NOT use netdev_priv macro here. */
1673         adapter = poll_dev->priv;
1674
1675         /*
1676          * e1000_clean is called per-cpu.  This lock protects
1677          * tx_ring from being cleaned by multiple cpus
1678          * simultaneously.  A failure obtaining the lock means
1679          * tx_ring is currently being cleaned anyway.
1680          */
1681         if (spin_trylock(&adapter->tx_queue_lock)) {
1682                 tx_cleaned = e1000_clean_tx_irq(adapter);
1683                 spin_unlock(&adapter->tx_queue_lock);
1684         }
1685
1686         adapter->clean_rx(adapter, &work_done, budget);
1687
1688         if (tx_cleaned)
1689                 work_done = budget;
1690
1691         /* If budget not fully consumed, exit the polling mode */
1692         if (work_done < budget) {
1693                 if (adapter->itr_setting & 3)
1694                         e1000_set_itr(adapter);
1695                 netif_rx_complete(poll_dev, napi);
1696                 e1000_irq_enable(adapter);
1697         }
1698
1699         return work_done;
1700 }
1701
1702 static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
1703 {
1704         struct e1000_adapter *adapter = netdev_priv(netdev);
1705         struct e1000_hw *hw = &adapter->hw;
1706         u32 vfta, index;
1707
1708         /* don't update vlan cookie if already programmed */
1709         if ((adapter->hw.mng_cookie.status &
1710              E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
1711             (vid == adapter->mng_vlan_id))
1712                 return;
1713         /* add VID to filter table */
1714         index = (vid >> 5) & 0x7F;
1715         vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
1716         vfta |= (1 << (vid & 0x1F));
1717         e1000e_write_vfta(hw, index, vfta);
1718 }
1719
1720 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
1721 {
1722         struct e1000_adapter *adapter = netdev_priv(netdev);
1723         struct e1000_hw *hw = &adapter->hw;
1724         u32 vfta, index;
1725
1726         if (!test_bit(__E1000_DOWN, &adapter->state))
1727                 e1000_irq_disable(adapter);
1728         vlan_group_set_device(adapter->vlgrp, vid, NULL);
1729
1730         if (!test_bit(__E1000_DOWN, &adapter->state))
1731                 e1000_irq_enable(adapter);
1732
1733         if ((adapter->hw.mng_cookie.status &
1734              E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
1735             (vid == adapter->mng_vlan_id)) {
1736                 /* release control to f/w */
1737                 e1000_release_hw_control(adapter);
1738                 return;
1739         }
1740
1741         /* remove VID from filter table */
1742         index = (vid >> 5) & 0x7F;
1743         vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
1744         vfta &= ~(1 << (vid & 0x1F));
1745         e1000e_write_vfta(hw, index, vfta);
1746 }
1747
1748 static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
1749 {
1750         struct net_device *netdev = adapter->netdev;
1751         u16 vid = adapter->hw.mng_cookie.vlan_id;
1752         u16 old_vid = adapter->mng_vlan_id;
1753
1754         if (!adapter->vlgrp)
1755                 return;
1756
1757         if (!vlan_group_get_device(adapter->vlgrp, vid)) {
1758                 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
1759                 if (adapter->hw.mng_cookie.status &
1760                         E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
1761                         e1000_vlan_rx_add_vid(netdev, vid);
1762                         adapter->mng_vlan_id = vid;
1763                 }
1764
1765                 if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
1766                                 (vid != old_vid) &&
1767                     !vlan_group_get_device(adapter->vlgrp, old_vid))
1768                         e1000_vlan_rx_kill_vid(netdev, old_vid);
1769         } else {
1770                 adapter->mng_vlan_id = vid;
1771         }
1772 }
1773
1774
1775 static void e1000_vlan_rx_register(struct net_device *netdev,
1776                                    struct vlan_group *grp)
1777 {
1778         struct e1000_adapter *adapter = netdev_priv(netdev);
1779         struct e1000_hw *hw = &adapter->hw;
1780         u32 ctrl, rctl;
1781
1782         if (!test_bit(__E1000_DOWN, &adapter->state))
1783                 e1000_irq_disable(adapter);
1784         adapter->vlgrp = grp;
1785
1786         if (grp) {
1787                 /* enable VLAN tag insert/strip */
1788                 ctrl = er32(CTRL);
1789                 ctrl |= E1000_CTRL_VME;
1790                 ew32(CTRL, ctrl);
1791
1792                 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
1793                         /* enable VLAN receive filtering */
1794                         rctl = er32(RCTL);
1795                         rctl &= ~E1000_RCTL_CFIEN;
1796                         ew32(RCTL, rctl);
1797                         e1000_update_mng_vlan(adapter);
1798                 }
1799         } else {
1800                 /* disable VLAN tag insert/strip */
1801                 ctrl = er32(CTRL);
1802                 ctrl &= ~E1000_CTRL_VME;
1803                 ew32(CTRL, ctrl);
1804
1805                 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
1806                         if (adapter->mng_vlan_id !=
1807                             (u16)E1000_MNG_VLAN_NONE) {
1808                                 e1000_vlan_rx_kill_vid(netdev,
1809                                                        adapter->mng_vlan_id);
1810                                 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
1811                         }
1812                 }
1813         }
1814
1815         if (!test_bit(__E1000_DOWN, &adapter->state))
1816                 e1000_irq_enable(adapter);
1817 }
1818
1819 static void e1000_restore_vlan(struct e1000_adapter *adapter)
1820 {
1821         u16 vid;
1822
1823         e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
1824
1825         if (!adapter->vlgrp)
1826                 return;
1827
1828         for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
1829                 if (!vlan_group_get_device(adapter->vlgrp, vid))
1830                         continue;
1831                 e1000_vlan_rx_add_vid(adapter->netdev, vid);
1832         }
1833 }
1834
1835 static void e1000_init_manageability(struct e1000_adapter *adapter)
1836 {
1837         struct e1000_hw *hw = &adapter->hw;
1838         u32 manc, manc2h;
1839
1840         if (!(adapter->flags & FLAG_MNG_PT_ENABLED))
1841                 return;
1842
1843         manc = er32(MANC);
1844
1845         /*
1846          * enable receiving management packets to the host. this will probably
1847          * generate destination unreachable messages from the host OS, but
1848          * the packets will be handled on SMBUS
1849          */
1850         manc |= E1000_MANC_EN_MNG2HOST;
1851         manc2h = er32(MANC2H);
1852 #define E1000_MNG2HOST_PORT_623 (1 << 5)
1853 #define E1000_MNG2HOST_PORT_664 (1 << 6)
1854         manc2h |= E1000_MNG2HOST_PORT_623;
1855         manc2h |= E1000_MNG2HOST_PORT_664;
1856         ew32(MANC2H, manc2h);
1857         ew32(MANC, manc);
1858 }
1859
1860 /**
1861  * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
1862  * @adapter: board private structure
1863  *
1864  * Configure the Tx unit of the MAC after a reset.
1865  **/
1866 static void e1000_configure_tx(struct e1000_adapter *adapter)
1867 {
1868         struct e1000_hw *hw = &adapter->hw;
1869         struct e1000_ring *tx_ring = adapter->tx_ring;
1870         u64 tdba;
1871         u32 tdlen, tctl, tipg, tarc;
1872         u32 ipgr1, ipgr2;
1873
1874         /* Setup the HW Tx Head and Tail descriptor pointers */
1875         tdba = tx_ring->dma;
1876         tdlen = tx_ring->count * sizeof(struct e1000_tx_desc);
1877         ew32(TDBAL, (tdba & DMA_32BIT_MASK));
1878         ew32(TDBAH, (tdba >> 32));
1879         ew32(TDLEN, tdlen);
1880         ew32(TDH, 0);
1881         ew32(TDT, 0);
1882         tx_ring->head = E1000_TDH;
1883         tx_ring->tail = E1000_TDT;
1884
1885         /* Set the default values for the Tx Inter Packet Gap timer */
1886         tipg = DEFAULT_82543_TIPG_IPGT_COPPER;          /*  8  */
1887         ipgr1 = DEFAULT_82543_TIPG_IPGR1;               /*  8  */
1888         ipgr2 = DEFAULT_82543_TIPG_IPGR2;               /*  6  */
1889
1890         if (adapter->flags & FLAG_TIPG_MEDIUM_FOR_80003ESLAN)
1891                 ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2; /*  7  */
1892
1893         tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
1894         tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
1895         ew32(TIPG, tipg);
1896
1897         /* Set the Tx Interrupt Delay register */
1898         ew32(TIDV, adapter->tx_int_delay);
1899         /* Tx irq moderation */
1900         ew32(TADV, adapter->tx_abs_int_delay);
1901
1902         /* Program the Transmit Control Register */
1903         tctl = er32(TCTL);
1904         tctl &= ~E1000_TCTL_CT;
1905         tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
1906                 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
1907
1908         if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) {
1909                 tarc = er32(TARC(0));
1910                 /*
1911                  * set the speed mode bit, we'll clear it if we're not at
1912                  * gigabit link later
1913                  */
1914 #define SPEED_MODE_BIT (1 << 21)
1915                 tarc |= SPEED_MODE_BIT;
1916                 ew32(TARC(0), tarc);
1917         }
1918
1919         /* errata: program both queues to unweighted RR */
1920         if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) {
1921                 tarc = er32(TARC(0));
1922                 tarc |= 1;
1923                 ew32(TARC(0), tarc);
1924                 tarc = er32(TARC(1));
1925                 tarc |= 1;
1926                 ew32(TARC(1), tarc);
1927         }
1928
1929         e1000e_config_collision_dist(hw);
1930
1931         /* Setup Transmit Descriptor Settings for eop descriptor */
1932         adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
1933
1934         /* only set IDE if we are delaying interrupts using the timers */
1935         if (adapter->tx_int_delay)
1936                 adapter->txd_cmd |= E1000_TXD_CMD_IDE;
1937
1938         /* enable Report Status bit */
1939         adapter->txd_cmd |= E1000_TXD_CMD_RS;
1940
1941         ew32(TCTL, tctl);
1942
1943         adapter->tx_queue_len = adapter->netdev->tx_queue_len;
1944 }
1945
1946 /**
1947  * e1000_setup_rctl - configure the receive control registers
1948  * @adapter: Board private structure
1949  **/
1950 #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
1951                            (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
1952 static void e1000_setup_rctl(struct e1000_adapter *adapter)
1953 {
1954         struct e1000_hw *hw = &adapter->hw;
1955         u32 rctl, rfctl;
1956         u32 psrctl = 0;
1957         u32 pages = 0;
1958
1959         /* Program MC offset vector base */
1960         rctl = er32(RCTL);
1961         rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
1962         rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
1963                 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
1964                 (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
1965
1966         /* Do not Store bad packets */
1967         rctl &= ~E1000_RCTL_SBP;
1968
1969         /* Enable Long Packet receive */
1970         if (adapter->netdev->mtu <= ETH_DATA_LEN)
1971                 rctl &= ~E1000_RCTL_LPE;
1972         else
1973                 rctl |= E1000_RCTL_LPE;
1974
1975         /* Enable hardware CRC frame stripping */
1976         rctl |= E1000_RCTL_SECRC;
1977
1978         /* Setup buffer sizes */
1979         rctl &= ~E1000_RCTL_SZ_4096;
1980         rctl |= E1000_RCTL_BSEX;
1981         switch (adapter->rx_buffer_len) {
1982         case 256:
1983                 rctl |= E1000_RCTL_SZ_256;
1984                 rctl &= ~E1000_RCTL_BSEX;
1985                 break;
1986         case 512:
1987                 rctl |= E1000_RCTL_SZ_512;
1988                 rctl &= ~E1000_RCTL_BSEX;
1989                 break;
1990         case 1024:
1991                 rctl |= E1000_RCTL_SZ_1024;
1992                 rctl &= ~E1000_RCTL_BSEX;
1993                 break;
1994         case 2048:
1995         default:
1996                 rctl |= E1000_RCTL_SZ_2048;
1997                 rctl &= ~E1000_RCTL_BSEX;
1998                 break;
1999         case 4096:
2000                 rctl |= E1000_RCTL_SZ_4096;
2001                 break;
2002         case 8192:
2003                 rctl |= E1000_RCTL_SZ_8192;
2004                 break;
2005         case 16384:
2006                 rctl |= E1000_RCTL_SZ_16384;
2007                 break;
2008         }
2009
2010         /*
2011          * 82571 and greater support packet-split where the protocol
2012          * header is placed in skb->data and the packet data is
2013          * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
2014          * In the case of a non-split, skb->data is linearly filled,
2015          * followed by the page buffers.  Therefore, skb->data is
2016          * sized to hold the largest protocol header.
2017          *
2018          * allocations using alloc_page take too long for regular MTU
2019          * so only enable packet split for jumbo frames
2020          *
2021          * Using pages when the page size is greater than 16k wastes
2022          * a lot of memory, since we allocate 3 pages at all times
2023          * per packet.
2024          */
2025         pages = PAGE_USE_COUNT(adapter->netdev->mtu);
2026         if (!(adapter->flags & FLAG_IS_ICH) && (pages <= 3) &&
2027             (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE))
2028                 adapter->rx_ps_pages = pages;
2029         else
2030                 adapter->rx_ps_pages = 0;
2031
2032         if (adapter->rx_ps_pages) {
2033                 /* Configure extra packet-split registers */
2034                 rfctl = er32(RFCTL);
2035                 rfctl |= E1000_RFCTL_EXTEN;
2036                 /*
2037                  * disable packet split support for IPv6 extension headers,
2038                  * because some malformed IPv6 headers can hang the Rx
2039                  */
2040                 rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
2041                           E1000_RFCTL_NEW_IPV6_EXT_DIS);
2042
2043                 ew32(RFCTL, rfctl);
2044
2045                 /* Enable Packet split descriptors */
2046                 rctl |= E1000_RCTL_DTYP_PS;
2047
2048                 psrctl |= adapter->rx_ps_bsize0 >>
2049                         E1000_PSRCTL_BSIZE0_SHIFT;
2050
2051                 switch (adapter->rx_ps_pages) {
2052                 case 3:
2053                         psrctl |= PAGE_SIZE <<
2054                                 E1000_PSRCTL_BSIZE3_SHIFT;
2055                 case 2:
2056                         psrctl |= PAGE_SIZE <<
2057                                 E1000_PSRCTL_BSIZE2_SHIFT;
2058                 case 1:
2059                         psrctl |= PAGE_SIZE >>
2060                                 E1000_PSRCTL_BSIZE1_SHIFT;
2061                         break;
2062                 }
2063
2064                 ew32(PSRCTL, psrctl);
2065         }
2066
2067         ew32(RCTL, rctl);
2068         /* just started the receive unit, no need to restart */
2069         adapter->flags &= ~FLAG_RX_RESTART_NOW;
2070 }
2071
2072 /**
2073  * e1000_configure_rx - Configure Receive Unit after Reset
2074  * @adapter: board private structure
2075  *
2076  * Configure the Rx unit of the MAC after a reset.
2077  **/
2078 static void e1000_configure_rx(struct e1000_adapter *adapter)
2079 {
2080         struct e1000_hw *hw = &adapter->hw;
2081         struct e1000_ring *rx_ring = adapter->rx_ring;
2082         u64 rdba;
2083         u32 rdlen, rctl, rxcsum, ctrl_ext;
2084
2085         if (adapter->rx_ps_pages) {
2086                 /* this is a 32 byte descriptor */
2087                 rdlen = rx_ring->count *
2088                         sizeof(union e1000_rx_desc_packet_split);
2089                 adapter->clean_rx = e1000_clean_rx_irq_ps;
2090                 adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
2091         } else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) {
2092                 rdlen = rx_ring->count * sizeof(struct e1000_rx_desc);
2093                 adapter->clean_rx = e1000_clean_jumbo_rx_irq;
2094                 adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
2095         } else {
2096                 rdlen = rx_ring->count * sizeof(struct e1000_rx_desc);
2097                 adapter->clean_rx = e1000_clean_rx_irq;
2098                 adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
2099         }
2100
2101         /* disable receives while setting up the descriptors */
2102         rctl = er32(RCTL);
2103         ew32(RCTL, rctl & ~E1000_RCTL_EN);
2104         e1e_flush();
2105         msleep(10);
2106
2107         /* set the Receive Delay Timer Register */
2108         ew32(RDTR, adapter->rx_int_delay);
2109
2110         /* irq moderation */
2111         ew32(RADV, adapter->rx_abs_int_delay);
2112         if (adapter->itr_setting != 0)
2113                 ew32(ITR, 1000000000 / (adapter->itr * 256));
2114
2115         ctrl_ext = er32(CTRL_EXT);
2116         /* Reset delay timers after every interrupt */
2117         ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
2118         /* Auto-Mask interrupts upon ICR access */
2119         ctrl_ext |= E1000_CTRL_EXT_IAME;
2120         ew32(IAM, 0xffffffff);
2121         ew32(CTRL_EXT, ctrl_ext);
2122         e1e_flush();
2123
2124         /*
2125          * Setup the HW Rx Head and Tail Descriptor Pointers and
2126          * the Base and Length of the Rx Descriptor Ring
2127          */
2128         rdba = rx_ring->dma;
2129         ew32(RDBAL, (rdba & DMA_32BIT_MASK));
2130         ew32(RDBAH, (rdba >> 32));
2131         ew32(RDLEN, rdlen);
2132         ew32(RDH, 0);
2133         ew32(RDT, 0);
2134         rx_ring->head = E1000_RDH;
2135         rx_ring->tail = E1000_RDT;
2136
2137         /* Enable Receive Checksum Offload for TCP and UDP */
2138         rxcsum = er32(RXCSUM);
2139         if (adapter->flags & FLAG_RX_CSUM_ENABLED) {
2140                 rxcsum |= E1000_RXCSUM_TUOFL;
2141
2142                 /*
2143                  * IPv4 payload checksum for UDP fragments must be
2144                  * used in conjunction with packet-split.
2145                  */
2146                 if (adapter->rx_ps_pages)
2147                         rxcsum |= E1000_RXCSUM_IPPCSE;
2148         } else {
2149                 rxcsum &= ~E1000_RXCSUM_TUOFL;
2150                 /* no need to clear IPPCSE as it defaults to 0 */
2151         }
2152         ew32(RXCSUM, rxcsum);
2153
2154         /*
2155          * Enable early receives on supported devices, only takes effect when
2156          * packet size is equal or larger than the specified value (in 8 byte
2157          * units), e.g. using jumbo frames when setting to E1000_ERT_2048
2158          */
2159         if ((adapter->flags & FLAG_HAS_ERT) &&
2160             (adapter->netdev->mtu > ETH_DATA_LEN)) {
2161                 u32 rxdctl = er32(RXDCTL(0));
2162                 ew32(RXDCTL(0), rxdctl | 0x3);
2163                 ew32(ERT, E1000_ERT_2048 | (1 << 13));
2164                 /*
2165                  * With jumbo frames and early-receive enabled, excessive
2166                  * C4->C2 latencies result in dropped transactions.
2167                  */
2168                 pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
2169                                           e1000e_driver_name, 55);
2170         } else {
2171                 pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY,
2172                                           e1000e_driver_name,
2173                                           PM_QOS_DEFAULT_VALUE);
2174         }
2175
2176         /* Enable Receives */
2177         ew32(RCTL, rctl);
2178 }
2179
2180 /**
2181  *  e1000_update_mc_addr_list - Update Multicast addresses
2182  *  @hw: pointer to the HW structure
2183  *  @mc_addr_list: array of multicast addresses to program
2184  *  @mc_addr_count: number of multicast addresses to program
2185  *  @rar_used_count: the first RAR register free to program
2186  *  @rar_count: total number of supported Receive Address Registers
2187  *
2188  *  Updates the Receive Address Registers and Multicast Table Array.
2189  *  The caller must have a packed mc_addr_list of multicast addresses.
2190  *  The parameter rar_count will usually be hw->mac.rar_entry_count
2191  *  unless there are workarounds that change this.  Currently no func pointer
2192  *  exists and all implementations are handled in the generic version of this
2193  *  function.
2194  **/
2195 static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
2196                                       u32 mc_addr_count, u32 rar_used_count,
2197                                       u32 rar_count)
2198 {
2199         hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count,
2200                                         rar_used_count, rar_count);
2201 }
2202
2203 /**
2204  * e1000_set_multi - Multicast and Promiscuous mode set
2205  * @netdev: network interface device structure
2206  *
2207  * The set_multi entry point is called whenever the multicast address
2208  * list or the network interface flags are updated.  This routine is
2209  * responsible for configuring the hardware for proper multicast,
2210  * promiscuous mode, and all-multi behavior.
2211  **/
2212 static void e1000_set_multi(struct net_device *netdev)
2213 {
2214         struct e1000_adapter *adapter = netdev_priv(netdev);
2215         struct e1000_hw *hw = &adapter->hw;
2216         struct e1000_mac_info *mac = &hw->mac;
2217         struct dev_mc_list *mc_ptr;
2218         u8  *mta_list;
2219         u32 rctl;
2220         int i;
2221
2222         /* Check for Promiscuous and All Multicast modes */
2223
2224         rctl = er32(RCTL);
2225
2226         if (netdev->flags & IFF_PROMISC) {
2227                 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
2228                 rctl &= ~E1000_RCTL_VFE;
2229         } else {
2230                 if (netdev->flags & IFF_ALLMULTI) {
2231                         rctl |= E1000_RCTL_MPE;
2232                         rctl &= ~E1000_RCTL_UPE;
2233                 } else {
2234                         rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
2235                 }
2236                 if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
2237                         rctl |= E1000_RCTL_VFE;
2238         }
2239
2240         ew32(RCTL, rctl);
2241
2242         if (netdev->mc_count) {
2243                 mta_list = kmalloc(netdev->mc_count * 6, GFP_ATOMIC);
2244                 if (!mta_list)
2245                         return;
2246
2247                 /* prepare a packed array of only addresses. */
2248                 mc_ptr = netdev->mc_list;
2249
2250                 for (i = 0; i < netdev->mc_count; i++) {
2251                         if (!mc_ptr)
2252                                 break;
2253                         memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr,
2254                                ETH_ALEN);
2255                         mc_ptr = mc_ptr->next;
2256                 }
2257
2258                 e1000_update_mc_addr_list(hw, mta_list, i, 1,
2259                                           mac->rar_entry_count);
2260                 kfree(mta_list);
2261         } else {
2262                 /*
2263                  * if we're called from probe, we might not have
2264                  * anything to do here, so clear out the list
2265                  */
2266                 e1000_update_mc_addr_list(hw, NULL, 0, 1, mac->rar_entry_count);
2267         }
2268 }
2269
2270 /**
2271  * e1000_configure - configure the hardware for Rx and Tx
2272  * @adapter: private board structure
2273  **/
2274 static void e1000_configure(struct e1000_adapter *adapter)
2275 {
2276         e1000_set_multi(adapter->netdev);
2277
2278         e1000_restore_vlan(adapter);
2279         e1000_init_manageability(adapter);
2280
2281         e1000_configure_tx(adapter);
2282         e1000_setup_rctl(adapter);
2283         e1000_configure_rx(adapter);
2284         adapter->alloc_rx_buf(adapter, e1000_desc_unused(adapter->rx_ring));
2285 }
2286
2287 /**
2288  * e1000e_power_up_phy - restore link in case the phy was powered down
2289  * @adapter: address of board private structure
2290  *
2291  * The phy may be powered down to save power and turn off link when the
2292  * driver is unloaded and wake on lan is not enabled (among others)
2293  * *** this routine MUST be followed by a call to e1000e_reset ***
2294  **/
2295 void e1000e_power_up_phy(struct e1000_adapter *adapter)
2296 {
2297         u16 mii_reg = 0;
2298
2299         /* Just clear the power down bit to wake the phy back up */
2300         if (adapter->hw.phy.media_type == e1000_media_type_copper) {
2301                 /*
2302                  * According to the manual, the phy will retain its
2303                  * settings across a power-down/up cycle
2304                  */
2305                 e1e_rphy(&adapter->hw, PHY_CONTROL, &mii_reg);
2306                 mii_reg &= ~MII_CR_POWER_DOWN;
2307                 e1e_wphy(&adapter->hw, PHY_CONTROL, mii_reg);
2308         }
2309
2310         adapter->hw.mac.ops.setup_link(&adapter->hw);
2311 }
2312
2313 /**
2314  * e1000_power_down_phy - Power down the PHY
2315  *
2316  * Power down the PHY so no link is implied when interface is down
2317  * The PHY cannot be powered down is management or WoL is active
2318  */
2319 static void e1000_power_down_phy(struct e1000_adapter *adapter)
2320 {
2321         struct e1000_hw *hw = &adapter->hw;
2322         u16 mii_reg;
2323
2324         /* WoL is enabled */
2325         if (adapter->wol)
2326                 return;
2327
2328         /* non-copper PHY? */
2329         if (adapter->hw.phy.media_type != e1000_media_type_copper)
2330                 return;
2331
2332         /* reset is blocked because of a SoL/IDER session */
2333         if (e1000e_check_mng_mode(hw) || e1000_check_reset_block(hw))
2334                 return;
2335
2336         /* manageability (AMT) is enabled */
2337         if (er32(MANC) & E1000_MANC_SMBUS_EN)
2338                 return;
2339
2340         /* power down the PHY */
2341         e1e_rphy(hw, PHY_CONTROL, &mii_reg);
2342         mii_reg |= MII_CR_POWER_DOWN;
2343         e1e_wphy(hw, PHY_CONTROL, mii_reg);
2344         mdelay(1);
2345 }
2346
2347 /**
2348  * e1000e_reset - bring the hardware into a known good state
2349  *
2350  * This function boots the hardware and enables some settings that
2351  * require a configuration cycle of the hardware - those cannot be
2352  * set/changed during runtime. After reset the device needs to be
2353  * properly configured for Rx, Tx etc.
2354  */
2355 void e1000e_reset(struct e1000_adapter *adapter)
2356 {
2357         struct e1000_mac_info *mac = &adapter->hw.mac;
2358         struct e1000_fc_info *fc = &adapter->hw.fc;
2359         struct e1000_hw *hw = &adapter->hw;
2360         u32 tx_space, min_tx_space, min_rx_space;
2361         u32 pba = adapter->pba;
2362         u16 hwm;
2363
2364         /* reset Packet Buffer Allocation to default */
2365         ew32(PBA, pba);
2366
2367         if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
2368                 /*
2369                  * To maintain wire speed transmits, the Tx FIFO should be
2370                  * large enough to accommodate two full transmit packets,
2371                  * rounded up to the next 1KB and expressed in KB.  Likewise,
2372                  * the Rx FIFO should be large enough to accommodate at least
2373                  * one full receive packet and is similarly rounded up and
2374                  * expressed in KB.
2375                  */
2376                 pba = er32(PBA);
2377                 /* upper 16 bits has Tx packet buffer allocation size in KB */
2378                 tx_space = pba >> 16;
2379                 /* lower 16 bits has Rx packet buffer allocation size in KB */
2380                 pba &= 0xffff;
2381                 /*
2382                  * the Tx fifo also stores 16 bytes of information about the tx
2383                  * but don't include ethernet FCS because hardware appends it
2384                  */
2385                 min_tx_space = (adapter->max_frame_size +
2386                                 sizeof(struct e1000_tx_desc) -
2387                                 ETH_FCS_LEN) * 2;
2388                 min_tx_space = ALIGN(min_tx_space, 1024);
2389                 min_tx_space >>= 10;
2390                 /* software strips receive CRC, so leave room for it */
2391                 min_rx_space = adapter->max_frame_size;
2392                 min_rx_space = ALIGN(min_rx_space, 1024);
2393                 min_rx_space >>= 10;
2394
2395                 /*
2396                  * If current Tx allocation is less than the min Tx FIFO size,
2397                  * and the min Tx FIFO size is less than the current Rx FIFO
2398                  * allocation, take space away from current Rx allocation
2399                  */
2400                 if ((tx_space < min_tx_space) &&
2401                     ((min_tx_space - tx_space) < pba)) {
2402                         pba -= min_tx_space - tx_space;
2403
2404                         /*
2405                          * if short on Rx space, Rx wins and must trump tx
2406                          * adjustment or use Early Receive if available
2407                          */
2408                         if ((pba < min_rx_space) &&
2409                             (!(adapter->flags & FLAG_HAS_ERT)))
2410                                 /* ERT enabled in e1000_configure_rx */
2411                                 pba = min_rx_space;
2412                 }
2413
2414                 ew32(PBA, pba);
2415         }
2416
2417
2418         /*
2419          * flow control settings
2420          *
2421          * The high water mark must be low enough to fit one full frame
2422          * (or the size used for early receive) above it in the Rx FIFO.
2423          * Set it to the lower of:
2424          * - 90% of the Rx FIFO size, and
2425          * - the full Rx FIFO size minus the early receive size (for parts
2426          *   with ERT support assuming ERT set to E1000_ERT_2048), or
2427          * - the full Rx FIFO size minus one full frame
2428          */
2429         if (adapter->flags & FLAG_HAS_ERT)
2430                 hwm = min(((pba << 10) * 9 / 10),
2431                           ((pba << 10) - (E1000_ERT_2048 << 3)));
2432         else
2433                 hwm = min(((pba << 10) * 9 / 10),
2434                           ((pba << 10) - adapter->max_frame_size));
2435
2436         fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */
2437         fc->low_water = fc->high_water - 8;
2438
2439         if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
2440                 fc->pause_time = 0xFFFF;
2441         else
2442                 fc->pause_time = E1000_FC_PAUSE_TIME;
2443         fc->send_xon = 1;
2444         fc->type = fc->original_type;
2445
2446         /* Allow time for pending master requests to run */
2447         mac->ops.reset_hw(hw);
2448
2449         /*
2450          * For parts with AMT enabled, let the firmware know
2451          * that the network interface is in control
2452          */
2453         if ((adapter->flags & FLAG_HAS_AMT) && e1000e_check_mng_mode(hw))
2454                 e1000_get_hw_control(adapter);
2455
2456         ew32(WUC, 0);
2457
2458         if (mac->ops.init_hw(hw))
2459                 ndev_err(adapter->netdev, "Hardware Error\n");
2460
2461         e1000_update_mng_vlan(adapter);
2462
2463         /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
2464         ew32(VET, ETH_P_8021Q);
2465
2466         e1000e_reset_adaptive(hw);
2467         e1000_get_phy_info(hw);
2468
2469         if (!(adapter->flags & FLAG_SMART_POWER_DOWN)) {
2470                 u16 phy_data = 0;
2471                 /*
2472                  * speed up time to link by disabling smart power down, ignore
2473                  * the return value of this function because there is nothing
2474                  * different we would do if it failed
2475                  */
2476                 e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
2477                 phy_data &= ~IGP02E1000_PM_SPD;
2478                 e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
2479         }
2480 }
2481
2482 int e1000e_up(struct e1000_adapter *adapter)
2483 {
2484         struct e1000_hw *hw = &adapter->hw;
2485
2486         /* hardware has been reset, we need to reload some things */
2487         e1000_configure(adapter);
2488
2489         clear_bit(__E1000_DOWN, &adapter->state);
2490
2491         napi_enable(&adapter->napi);
2492         e1000_irq_enable(adapter);
2493
2494         /* fire a link change interrupt to start the watchdog */
2495         ew32(ICS, E1000_ICS_LSC);
2496         return 0;
2497 }
2498
2499 void e1000e_down(struct e1000_adapter *adapter)
2500 {
2501         struct net_device *netdev = adapter->netdev;
2502         struct e1000_hw *hw = &adapter->hw;
2503         u32 tctl, rctl;
2504
2505         /*
2506          * signal that we're down so the interrupt handler does not
2507          * reschedule our watchdog timer
2508          */
2509         set_bit(__E1000_DOWN, &adapter->state);
2510
2511         /* disable receives in the hardware */
2512         rctl = er32(RCTL);
2513         ew32(RCTL, rctl & ~E1000_RCTL_EN);
2514         /* flush and sleep below */
2515
2516         netif_tx_stop_all_queues(netdev);
2517
2518         /* disable transmits in the hardware */
2519         tctl = er32(TCTL);
2520         tctl &= ~E1000_TCTL_EN;
2521         ew32(TCTL, tctl);
2522         /* flush both disables and wait for them to finish */
2523         e1e_flush();
2524         msleep(10);
2525
2526         napi_disable(&adapter->napi);
2527         e1000_irq_disable(adapter);
2528
2529         del_timer_sync(&adapter->watchdog_timer);
2530         del_timer_sync(&adapter->phy_info_timer);
2531
2532         netdev->tx_queue_len = adapter->tx_queue_len;
2533         netif_carrier_off(netdev);
2534         adapter->link_speed = 0;
2535         adapter->link_duplex = 0;
2536
2537         if (!pci_channel_offline(adapter->pdev))
2538                 e1000e_reset(adapter);
2539         e1000_clean_tx_ring(adapter);
2540         e1000_clean_rx_ring(adapter);
2541
2542         /*
2543          * TODO: for power management, we could drop the link and
2544          * pci_disable_device here.
2545          */
2546 }
2547
2548 void e1000e_reinit_locked(struct e1000_adapter *adapter)
2549 {
2550         might_sleep();
2551         while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
2552                 msleep(1);
2553         e1000e_down(adapter);
2554         e1000e_up(adapter);
2555         clear_bit(__E1000_RESETTING, &adapter->state);
2556 }
2557
2558 /**
2559  * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
2560  * @adapter: board private structure to initialize
2561  *
2562  * e1000_sw_init initializes the Adapter private data structure.
2563  * Fields are initialized based on PCI device information and
2564  * OS network device settings (MTU size).
2565  **/
2566 static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
2567 {
2568         struct net_device *netdev = adapter->netdev;
2569
2570         adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
2571         adapter->rx_ps_bsize0 = 128;
2572         adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
2573         adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
2574
2575         adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
2576         if (!adapter->tx_ring)
2577                 goto err;
2578
2579         adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
2580         if (!adapter->rx_ring)
2581                 goto err;
2582
2583         spin_lock_init(&adapter->tx_queue_lock);
2584
2585         /* Explicitly disable IRQ since the NIC can be in any state. */
2586         e1000_irq_disable(adapter);
2587
2588         spin_lock_init(&adapter->stats_lock);
2589
2590         set_bit(__E1000_DOWN, &adapter->state);
2591         return 0;
2592
2593 err:
2594         ndev_err(netdev, "Unable to allocate memory for queues\n");
2595         kfree(adapter->rx_ring);
2596         kfree(adapter->tx_ring);
2597         return -ENOMEM;
2598 }
2599
2600 /**
2601  * e1000_open - Called when a network interface is made active
2602  * @netdev: network interface device structure
2603  *
2604  * Returns 0 on success, negative value on failure
2605  *
2606  * The open entry point is called when a network interface is made
2607  * active by the system (IFF_UP).  At this point all resources needed
2608  * for transmit and receive operations are allocated, the interrupt
2609  * handler is registered with the OS, the watchdog timer is started,
2610  * and the stack is notified that the interface is ready.
2611  **/
2612 static int e1000_open(struct net_device *netdev)
2613 {
2614         struct e1000_adapter *adapter = netdev_priv(netdev);
2615         struct e1000_hw *hw = &adapter->hw;
2616         int err;
2617
2618         /* disallow open during test */
2619         if (test_bit(__E1000_TESTING, &adapter->state))
2620                 return -EBUSY;
2621
2622         /* allocate transmit descriptors */
2623         err = e1000e_setup_tx_resources(adapter);
2624         if (err)
2625                 goto err_setup_tx;
2626
2627         /* allocate receive descriptors */
2628         err = e1000e_setup_rx_resources(adapter);
2629         if (err)
2630                 goto err_setup_rx;
2631
2632         e1000e_power_up_phy(adapter);
2633
2634         adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
2635         if ((adapter->hw.mng_cookie.status &
2636              E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
2637                 e1000_update_mng_vlan(adapter);
2638
2639         /*
2640          * If AMT is enabled, let the firmware know that the network
2641          * interface is now open
2642          */
2643         if ((adapter->flags & FLAG_HAS_AMT) &&
2644             e1000e_check_mng_mode(&adapter->hw))
2645                 e1000_get_hw_control(adapter);
2646
2647         /*
2648          * before we allocate an interrupt, we must be ready to handle it.
2649          * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
2650          * as soon as we call pci_request_irq, so we have to setup our
2651          * clean_rx handler before we do so.
2652          */
2653         e1000_configure(adapter);
2654
2655         err = e1000_request_irq(adapter);
2656         if (err)
2657                 goto err_req_irq;
2658
2659         /* From here on the code is the same as e1000e_up() */
2660         clear_bit(__E1000_DOWN, &adapter->state);
2661
2662         napi_enable(&adapter->napi);
2663
2664         e1000_irq_enable(adapter);
2665
2666         netif_tx_start_all_queues(netdev);
2667
2668         /* fire a link status change interrupt to start the watchdog */
2669         ew32(ICS, E1000_ICS_LSC);
2670
2671         return 0;
2672
2673 err_req_irq:
2674         e1000_release_hw_control(adapter);
2675         e1000_power_down_phy(adapter);
2676         e1000e_free_rx_resources(adapter);
2677 err_setup_rx:
2678         e1000e_free_tx_resources(adapter);
2679 err_setup_tx:
2680         e1000e_reset(adapter);
2681
2682         return err;
2683 }
2684
2685 /**
2686  * e1000_close - Disables a network interface
2687  * @netdev: network interface device structure
2688  *
2689  * Returns 0, this is not allowed to fail
2690  *
2691  * The close entry point is called when an interface is de-activated
2692  * by the OS.  The hardware is still under the drivers control, but
2693  * needs to be disabled.  A global MAC reset is issued to stop the
2694  * hardware, and all transmit and receive resources are freed.
2695  **/
2696 static int e1000_close(struct net_device *netdev)
2697 {
2698         struct e1000_adapter *adapter = netdev_priv(netdev);
2699
2700         WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
2701         e1000e_down(adapter);
2702         e1000_power_down_phy(adapter);
2703         e1000_free_irq(adapter);
2704
2705         e1000e_free_tx_resources(adapter);
2706         e1000e_free_rx_resources(adapter);
2707
2708         /*
2709          * kill manageability vlan ID if supported, but not if a vlan with
2710          * the same ID is registered on the host OS (let 8021q kill it)
2711          */
2712         if ((adapter->hw.mng_cookie.status &
2713                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
2714              !(adapter->vlgrp &&
2715                vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id)))
2716                 e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
2717
2718         /*
2719          * If AMT is enabled, let the firmware know that the network
2720          * interface is now closed
2721          */
2722         if ((adapter->flags & FLAG_HAS_AMT) &&
2723             e1000e_check_mng_mode(&adapter->hw))
2724                 e1000_release_hw_control(adapter);
2725
2726         return 0;
2727 }
2728 /**
2729  * e1000_set_mac - Change the Ethernet Address of the NIC
2730  * @netdev: network interface device structure
2731  * @p: pointer to an address structure
2732  *
2733  * Returns 0 on success, negative on failure
2734  **/
2735 static int e1000_set_mac(struct net_device *netdev, void *p)
2736 {
2737         struct e1000_adapter *adapter = netdev_priv(netdev);
2738         struct sockaddr *addr = p;
2739
2740         if (!is_valid_ether_addr(addr->sa_data))
2741                 return -EADDRNOTAVAIL;
2742
2743         memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
2744         memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len);
2745
2746         e1000e_rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
2747
2748         if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) {
2749                 /* activate the work around */
2750                 e1000e_set_laa_state_82571(&adapter->hw, 1);
2751
2752                 /*
2753                  * Hold a copy of the LAA in RAR[14] This is done so that
2754                  * between the time RAR[0] gets clobbered  and the time it
2755                  * gets fixed (in e1000_watchdog), the actual LAA is in one
2756                  * of the RARs and no incoming packets directed to this port
2757                  * are dropped. Eventually the LAA will be in RAR[0] and
2758                  * RAR[14]
2759                  */
2760                 e1000e_rar_set(&adapter->hw,
2761                               adapter->hw.mac.addr,
2762                               adapter->hw.mac.rar_entry_count - 1);
2763         }
2764
2765         return 0;
2766 }
2767
2768 /*
2769  * Need to wait a few seconds after link up to get diagnostic information from
2770  * the phy
2771  */
2772 static void e1000_update_phy_info(unsigned long data)
2773 {
2774         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
2775         e1000_get_phy_info(&adapter->hw);
2776 }
2777
2778 /**
2779  * e1000e_update_stats - Update the board statistics counters
2780  * @adapter: board private structure
2781  **/
2782 void e1000e_update_stats(struct e1000_adapter *adapter)
2783 {
2784         struct e1000_hw *hw = &adapter->hw;
2785         struct pci_dev *pdev = adapter->pdev;
2786         unsigned long irq_flags;
2787         u16 phy_tmp;
2788
2789 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
2790
2791         /*
2792          * Prevent stats update while adapter is being reset, or if the pci
2793          * connection is down.
2794          */
2795         if (adapter->link_speed == 0)
2796                 return;
2797         if (pci_channel_offline(pdev))
2798                 return;
2799
2800         spin_lock_irqsave(&adapter->stats_lock, irq_flags);
2801
2802         /*
2803          * these counters are modified from e1000_adjust_tbi_stats,
2804          * called from the interrupt context, so they must only
2805          * be written while holding adapter->stats_lock
2806          */
2807
2808         adapter->stats.crcerrs += er32(CRCERRS);
2809         adapter->stats.gprc += er32(GPRC);
2810         adapter->stats.gorc += er32(GORCL);
2811         er32(GORCH); /* Clear gorc */
2812         adapter->stats.bprc += er32(BPRC);
2813         adapter->stats.mprc += er32(MPRC);
2814         adapter->stats.roc += er32(ROC);
2815
2816         adapter->stats.mpc += er32(MPC);
2817         adapter->stats.scc += er32(SCC);
2818         adapter->stats.ecol += er32(ECOL);
2819         adapter->stats.mcc += er32(MCC);
2820         adapter->stats.latecol += er32(LATECOL);
2821         adapter->stats.dc += er32(DC);
2822         adapter->stats.xonrxc += er32(XONRXC);
2823         adapter->stats.xontxc += er32(XONTXC);
2824         adapter->stats.xoffrxc += er32(XOFFRXC);
2825         adapter->stats.xofftxc += er32(XOFFTXC);
2826         adapter->stats.gptc += er32(GPTC);
2827         adapter->stats.gotc += er32(GOTCL);
2828         er32(GOTCH); /* Clear gotc */
2829         adapter->stats.rnbc += er32(RNBC);
2830         adapter->stats.ruc += er32(RUC);
2831
2832         adapter->stats.mptc += er32(MPTC);
2833         adapter->stats.bptc += er32(BPTC);
2834
2835         /* used for adaptive IFS */
2836
2837         hw->mac.tx_packet_delta = er32(TPT);
2838         adapter->stats.tpt += hw->mac.tx_packet_delta;
2839         hw->mac.collision_delta = er32(COLC);
2840         adapter->stats.colc += hw->mac.collision_delta;
2841
2842         adapter->stats.algnerrc += er32(ALGNERRC);
2843         adapter->stats.rxerrc += er32(RXERRC);
2844         adapter->stats.tncrs += er32(TNCRS);
2845         adapter->stats.cexterr += er32(CEXTERR);
2846         adapter->stats.tsctc += er32(TSCTC);
2847         adapter->stats.tsctfc += er32(TSCTFC);
2848
2849         /* Fill out the OS statistics structure */
2850         adapter->net_stats.multicast = adapter->stats.mprc;
2851         adapter->net_stats.collisions = adapter->stats.colc;
2852
2853         /* Rx Errors */
2854
2855         /*
2856          * RLEC on some newer hardware can be incorrect so build
2857          * our own version based on RUC and ROC
2858          */
2859         adapter->net_stats.rx_errors = adapter->stats.rxerrc +
2860                 adapter->stats.crcerrs + adapter->stats.algnerrc +
2861                 adapter->stats.ruc + adapter->stats.roc +
2862                 adapter->stats.cexterr;
2863         adapter->net_stats.rx_length_errors = adapter->stats.ruc +
2864                                               adapter->stats.roc;
2865         adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
2866         adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
2867         adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
2868
2869         /* Tx Errors */
2870         adapter->net_stats.tx_errors = adapter->stats.ecol +
2871                                        adapter->stats.latecol;
2872         adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
2873         adapter->net_stats.tx_window_errors = adapter->stats.latecol;
2874         adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
2875
2876         /* Tx Dropped needs to be maintained elsewhere */
2877
2878         /* Phy Stats */
2879         if (hw->phy.media_type == e1000_media_type_copper) {
2880                 if ((adapter->link_speed == SPEED_1000) &&
2881                    (!e1e_rphy(hw, PHY_1000T_STATUS, &phy_tmp))) {
2882                         phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
2883                         adapter->phy_stats.idle_errors += phy_tmp;
2884                 }
2885         }
2886
2887         /* Management Stats */
2888         adapter->stats.mgptc += er32(MGTPTC);
2889         adapter->stats.mgprc += er32(MGTPRC);
2890         adapter->stats.mgpdc += er32(MGTPDC);
2891
2892         spin_unlock_irqrestore(&adapter->stats_lock, irq_flags);
2893 }
2894
2895 /**
2896  * e1000_phy_read_status - Update the PHY register status snapshot
2897  * @adapter: board private structure
2898  **/
2899 static void e1000_phy_read_status(struct e1000_adapter *adapter)
2900 {
2901         struct e1000_hw *hw = &adapter->hw;
2902         struct e1000_phy_regs *phy = &adapter->phy_regs;
2903         int ret_val;
2904         unsigned long irq_flags;
2905
2906
2907         spin_lock_irqsave(&adapter->stats_lock, irq_flags);
2908
2909         if ((er32(STATUS) & E1000_STATUS_LU) &&
2910             (adapter->hw.phy.media_type == e1000_media_type_copper)) {
2911                 ret_val  = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr);
2912                 ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr);
2913                 ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise);
2914                 ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa);
2915                 ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion);
2916                 ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000);
2917                 ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
2918                 ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
2919                 if (ret_val)
2920                         ndev_warn(adapter->netdev,
2921                                   "Error reading PHY register\n");
2922         } else {
2923                 /*
2924                  * Do not read PHY registers if link is not up
2925                  * Set values to typical power-on defaults
2926                  */
2927                 phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX);
2928                 phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL |
2929                              BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE |
2930                              BMSR_ERCAP);
2931                 phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP |
2932                                   ADVERTISE_ALL | ADVERTISE_CSMA);
2933                 phy->lpa = 0;
2934                 phy->expansion = EXPANSION_ENABLENPAGE;
2935                 phy->ctrl1000 = ADVERTISE_1000FULL;
2936                 phy->stat1000 = 0;
2937                 phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF);
2938         }
2939
2940         spin_unlock_irqrestore(&adapter->stats_lock, irq_flags);
2941 }
2942
2943 static void e1000_print_link_info(struct e1000_adapter *adapter)
2944 {
2945         struct e1000_hw *hw = &adapter->hw;
2946         struct net_device *netdev = adapter->netdev;
2947         u32 ctrl = er32(CTRL);
2948
2949         ndev_info(netdev,
2950                 "Link is Up %d Mbps %s, Flow Control: %s\n",
2951                 adapter->link_speed,
2952                 (adapter->link_duplex == FULL_DUPLEX) ?
2953                                 "Full Duplex" : "Half Duplex",
2954                 ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
2955                                 "RX/TX" :
2956                 ((ctrl & E1000_CTRL_RFCE) ? "RX" :
2957                 ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" )));
2958 }
2959
2960 static bool e1000_has_link(struct e1000_adapter *adapter)
2961 {
2962         struct e1000_hw *hw = &adapter->hw;
2963         bool link_active = 0;
2964         s32 ret_val = 0;
2965
2966         /*
2967          * get_link_status is set on LSC (link status) interrupt or
2968          * Rx sequence error interrupt.  get_link_status will stay
2969          * false until the check_for_link establishes link
2970          * for copper adapters ONLY
2971          */
2972         switch (hw->phy.media_type) {
2973         case e1000_media_type_copper:
2974                 if (hw->mac.get_link_status) {
2975                         ret_val = hw->mac.ops.check_for_link(hw);
2976                         link_active = !hw->mac.get_link_status;
2977                 } else {
2978                         link_active = 1;
2979                 }
2980                 break;
2981         case e1000_media_type_fiber:
2982                 ret_val = hw->mac.ops.check_for_link(hw);
2983                 link_active = !!(er32(STATUS) & E1000_STATUS_LU);
2984                 break;
2985         case e1000_media_type_internal_serdes:
2986                 ret_val = hw->mac.ops.check_for_link(hw);
2987                 link_active = adapter->hw.mac.serdes_has_link;
2988                 break;
2989         default:
2990         case e1000_media_type_unknown:
2991                 break;
2992         }
2993
2994         if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
2995             (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
2996                 /* See e1000_kmrn_lock_loss_workaround_ich8lan() */
2997                 ndev_info(adapter->netdev,
2998                           "Gigabit has been disabled, downgrading speed\n");
2999         }
3000
3001         return link_active;
3002 }
3003
3004 static void e1000e_enable_receives(struct e1000_adapter *adapter)
3005 {
3006         /* make sure the receive unit is started */
3007         if ((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
3008             (adapter->flags & FLAG_RX_RESTART_NOW)) {
3009                 struct e1000_hw *hw = &adapter->hw;
3010                 u32 rctl = er32(RCTL);
3011                 ew32(RCTL, rctl | E1000_RCTL_EN);
3012                 adapter->flags &= ~FLAG_RX_RESTART_NOW;
3013         }
3014 }
3015
3016 /**
3017  * e1000_watchdog - Timer Call-back
3018  * @data: pointer to adapter cast into an unsigned long
3019  **/
3020 static void e1000_watchdog(unsigned long data)
3021 {
3022         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
3023
3024         /* Do the rest outside of interrupt context */
3025         schedule_work(&adapter->watchdog_task);
3026
3027         /* TODO: make this use queue_delayed_work() */
3028 }
3029
3030 static void e1000_watchdog_task(struct work_struct *work)
3031 {
3032         struct e1000_adapter *adapter = container_of(work,
3033                                         struct e1000_adapter, watchdog_task);
3034         struct net_device *netdev = adapter->netdev;
3035         struct e1000_mac_info *mac = &adapter->hw.mac;
3036         struct e1000_ring *tx_ring = adapter->tx_ring;
3037         struct e1000_hw *hw = &adapter->hw;
3038         u32 link, tctl;
3039         int tx_pending = 0;
3040
3041         link = e1000_has_link(adapter);
3042         if ((netif_carrier_ok(netdev)) && link) {
3043                 e1000e_enable_receives(adapter);
3044                 goto link_up;
3045         }
3046
3047         if ((e1000e_enable_tx_pkt_filtering(hw)) &&
3048             (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id))
3049                 e1000_update_mng_vlan(adapter);
3050
3051         if (link) {
3052                 if (!netif_carrier_ok(netdev)) {
3053                         bool txb2b = 1;
3054                         /* update snapshot of PHY registers on LSC */
3055                         e1000_phy_read_status(adapter);
3056                         mac->ops.get_link_up_info(&adapter->hw,
3057                                                    &adapter->link_speed,
3058                                                    &adapter->link_duplex);
3059                         e1000_print_link_info(adapter);
3060                         /*
3061                          * tweak tx_queue_len according to speed/duplex
3062                          * and adjust the timeout factor
3063                          */
3064                         netdev->tx_queue_len = adapter->tx_queue_len;
3065                         adapter->tx_timeout_factor = 1;
3066                         switch (adapter->link_speed) {
3067                         case SPEED_10:
3068                                 txb2b = 0;
3069                                 netdev->tx_queue_len = 10;
3070                                 adapter->tx_timeout_factor = 14;
3071                                 break;
3072                         case SPEED_100:
3073                                 txb2b = 0;
3074                                 netdev->tx_queue_len = 100;
3075                                 /* maybe add some timeout factor ? */
3076                                 break;
3077                         }
3078
3079                         /*
3080                          * workaround: re-program speed mode bit after
3081                          * link-up event
3082                          */
3083                         if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) &&
3084                             !txb2b) {
3085                                 u32 tarc0;
3086                                 tarc0 = er32(TARC(0));
3087                                 tarc0 &= ~SPEED_MODE_BIT;
3088                                 ew32(TARC(0), tarc0);
3089                         }
3090
3091                         /*
3092                          * disable TSO for pcie and 10/100 speeds, to avoid
3093                          * some hardware issues
3094                          */
3095                         if (!(adapter->flags & FLAG_TSO_FORCE)) {
3096                                 switch (adapter->link_speed) {
3097                                 case SPEED_10:
3098                                 case SPEED_100:
3099                                         ndev_info(netdev,
3100                                         "10/100 speed: disabling TSO\n");
3101                                         netdev->features &= ~NETIF_F_TSO;
3102                                         netdev->features &= ~NETIF_F_TSO6;
3103                                         break;
3104                                 case SPEED_1000:
3105                                         netdev->features |= NETIF_F_TSO;
3106                                         netdev->features |= NETIF_F_TSO6;
3107                                         break;
3108                                 default:
3109                                         /* oops */
3110                                         break;
3111                                 }
3112                         }
3113
3114                         /*
3115                          * enable transmits in the hardware, need to do this
3116                          * after setting TARC(0)
3117                          */
3118                         tctl = er32(TCTL);
3119                         tctl |= E1000_TCTL_EN;
3120                         ew32(TCTL, tctl);
3121
3122                         netif_carrier_on(netdev);
3123                         netif_tx_wake_all_queues(netdev);
3124
3125                         if (!test_bit(__E1000_DOWN, &adapter->state))
3126                                 mod_timer(&adapter->phy_info_timer,
3127                                           round_jiffies(jiffies + 2 * HZ));
3128                 }
3129         } else {
3130                 if (netif_carrier_ok(netdev)) {
3131                         adapter->link_speed = 0;
3132                         adapter->link_duplex = 0;
3133                         ndev_info(netdev, "Link is Down\n");
3134                         netif_carrier_off(netdev);
3135                         netif_tx_stop_all_queues(netdev);
3136                         if (!test_bit(__E1000_DOWN, &adapter->state))
3137                                 mod_timer(&adapter->phy_info_timer,
3138                                           round_jiffies(jiffies + 2 * HZ));
3139
3140                         if (adapter->flags & FLAG_RX_NEEDS_RESTART)
3141                                 schedule_work(&adapter->reset_task);
3142                 }
3143         }
3144
3145 link_up:
3146         e1000e_update_stats(adapter);
3147
3148         mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
3149         adapter->tpt_old = adapter->stats.tpt;
3150         mac->collision_delta = adapter->stats.colc - adapter->colc_old;
3151         adapter->colc_old = adapter->stats.colc;
3152
3153         adapter->gorc = adapter->stats.gorc - adapter->gorc_old;
3154         adapter->gorc_old = adapter->stats.gorc;
3155         adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
3156         adapter->gotc_old = adapter->stats.gotc;
3157
3158         e1000e_update_adaptive(&adapter->hw);
3159
3160         if (!netif_carrier_ok(netdev)) {
3161                 tx_pending = (e1000_desc_unused(tx_ring) + 1 <
3162                                tx_ring->count);
3163                 if (tx_pending) {
3164                         /*
3165                          * We've lost link, so the controller stops DMA,
3166                          * but we've got queued Tx work that's never going
3167                          * to get done, so reset controller to flush Tx.
3168                          * (Do the reset outside of interrupt context).
3169                          */
3170                         adapter->tx_timeout_count++;
3171                         schedule_work(&adapter->reset_task);
3172                 }
3173         }
3174
3175         /* Cause software interrupt to ensure Rx ring is cleaned */
3176         ew32(ICS, E1000_ICS_RXDMT0);
3177
3178         /* Force detection of hung controller every watchdog period */
3179         adapter->detect_tx_hung = 1;
3180
3181         /*
3182          * With 82571 controllers, LAA may be overwritten due to controller
3183          * reset from the other port. Set the appropriate LAA in RAR[0]
3184          */
3185         if (e1000e_get_laa_state_82571(hw))
3186                 e1000e_rar_set(hw, adapter->hw.mac.addr, 0);
3187
3188         /* Reset the timer */
3189         if (!test_bit(__E1000_DOWN, &adapter->state))
3190                 mod_timer(&adapter->watchdog_timer,
3191                           round_jiffies(jiffies + 2 * HZ));
3192 }
3193
3194 #define E1000_TX_FLAGS_CSUM             0x00000001
3195 #define E1000_TX_FLAGS_VLAN             0x00000002
3196 #define E1000_TX_FLAGS_TSO              0x00000004
3197 #define E1000_TX_FLAGS_IPV4             0x00000008
3198 #define E1000_TX_FLAGS_VLAN_MASK        0xffff0000
3199 #define E1000_TX_FLAGS_VLAN_SHIFT       16
3200
3201 static int e1000_tso(struct e1000_adapter *adapter,
3202                      struct sk_buff *skb)
3203 {
3204         struct e1000_ring *tx_ring = adapter->tx_ring;
3205         struct e1000_context_desc *context_desc;
3206         struct e1000_buffer *buffer_info;
3207         unsigned int i;
3208         u32 cmd_length = 0;
3209         u16 ipcse = 0, tucse, mss;
3210         u8 ipcss, ipcso, tucss, tucso, hdr_len;
3211         int err;
3212
3213         if (skb_is_gso(skb)) {
3214                 if (skb_header_cloned(skb)) {
3215                         err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
3216                         if (err)
3217                                 return err;
3218                 }
3219
3220                 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
3221                 mss = skb_shinfo(skb)->gso_size;
3222                 if (skb->protocol == htons(ETH_P_IP)) {
3223                         struct iphdr *iph = ip_hdr(skb);
3224                         iph->tot_len = 0;
3225                         iph->check = 0;
3226                         tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
3227                                                                  iph->daddr, 0,
3228                                                                  IPPROTO_TCP,
3229                                                                  0);
3230                         cmd_length = E1000_TXD_CMD_IP;
3231                         ipcse = skb_transport_offset(skb) - 1;
3232                 } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) {
3233                         ipv6_hdr(skb)->payload_len = 0;
3234                         tcp_hdr(skb)->check =
3235                                 ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
3236                                                  &ipv6_hdr(skb)->daddr,
3237                                                  0, IPPROTO_TCP, 0);
3238                         ipcse = 0;
3239                 }
3240                 ipcss = skb_network_offset(skb);
3241                 ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
3242                 tucss = skb_transport_offset(skb);
3243                 tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
3244                 tucse = 0;
3245
3246                 cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
3247                                E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
3248
3249                 i = tx_ring->next_to_use;
3250                 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
3251                 buffer_info = &tx_ring->buffer_info[i];
3252
3253                 context_desc->lower_setup.ip_fields.ipcss  = ipcss;
3254                 context_desc->lower_setup.ip_fields.ipcso  = ipcso;
3255                 context_desc->lower_setup.ip_fields.ipcse  = cpu_to_le16(ipcse);
3256                 context_desc->upper_setup.tcp_fields.tucss = tucss;
3257                 context_desc->upper_setup.tcp_fields.tucso = tucso;
3258                 context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
3259                 context_desc->tcp_seg_setup.fields.mss     = cpu_to_le16(mss);
3260                 context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
3261                 context_desc->cmd_and_length = cpu_to_le32(cmd_length);
3262
3263                 buffer_info->time_stamp = jiffies;
3264                 buffer_info->next_to_watch = i;
3265
3266                 i++;
3267                 if (i == tx_ring->count)
3268                         i = 0;
3269                 tx_ring->next_to_use = i;
3270
3271                 return 1;
3272         }
3273
3274         return 0;
3275 }
3276
3277 static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb)
3278 {
3279         struct e1000_ring *tx_ring = adapter->tx_ring;
3280         struct e1000_context_desc *context_desc;
3281         struct e1000_buffer *buffer_info;
3282         unsigned int i;
3283         u8 css;
3284
3285         if (skb->ip_summed == CHECKSUM_PARTIAL) {
3286                 css = skb_transport_offset(skb);
3287
3288                 i = tx_ring->next_to_use;
3289                 buffer_info = &tx_ring->buffer_info[i];
3290                 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
3291
3292                 context_desc->lower_setup.ip_config = 0;
3293                 context_desc->upper_setup.tcp_fields.tucss = css;
3294                 context_desc->upper_setup.tcp_fields.tucso =
3295                                         css + skb->csum_offset;
3296                 context_desc->upper_setup.tcp_fields.tucse = 0;
3297                 context_desc->tcp_seg_setup.data = 0;
3298                 context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT);
3299
3300                 buffer_info->time_stamp = jiffies;
3301                 buffer_info->next_to_watch = i;
3302
3303                 i++;
3304                 if (i == tx_ring->count)
3305                         i = 0;
3306                 tx_ring->next_to_use = i;
3307
3308                 return 1;
3309         }
3310
3311         return 0;
3312 }
3313
3314 #define E1000_MAX_PER_TXD       8192
3315 #define E1000_MAX_TXD_PWR       12
3316
3317 static int e1000_tx_map(struct e1000_adapter *adapter,
3318                         struct sk_buff *skb, unsigned int first,
3319                         unsigned int max_per_txd, unsigned int nr_frags,
3320                         unsigned int mss)
3321 {
3322         struct e1000_ring *tx_ring = adapter->tx_ring;
3323         struct e1000_buffer *buffer_info;
3324         unsigned int len = skb->len - skb->data_len;
3325         unsigned int offset = 0, size, count = 0, i;
3326         unsigned int f;
3327
3328         i = tx_ring->next_to_use;
3329
3330         while (len) {
3331                 buffer_info = &tx_ring->buffer_info[i];
3332                 size = min(len, max_per_txd);
3333
3334                 /* Workaround for premature desc write-backs
3335                  * in TSO mode.  Append 4-byte sentinel desc */
3336                 if (mss && !nr_frags && size == len && size > 8)
3337                         size -= 4;
3338
3339                 buffer_info->length = size;
3340                 /* set time_stamp *before* dma to help avoid a possible race */
3341                 buffer_info->time_stamp = jiffies;
3342                 buffer_info->dma =
3343                         pci_map_single(adapter->pdev,
3344                                 skb->data + offset,
3345                                 size,
3346                                 PCI_DMA_TODEVICE);
3347                 if (pci_dma_mapping_error(buffer_info->dma)) {
3348                         dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
3349                         adapter->tx_dma_failed++;
3350                         return -1;
3351                 }
3352                 buffer_info->next_to_watch = i;
3353
3354                 len -= size;
3355                 offset += size;
3356                 count++;
3357                 i++;
3358                 if (i == tx_ring->count)
3359                         i = 0;
3360         }
3361
3362         for (f = 0; f < nr_frags; f++) {
3363                 struct skb_frag_struct *frag;
3364
3365                 frag = &skb_shinfo(skb)->frags[f];
3366                 len = frag->size;
3367                 offset = frag->page_offset;
3368
3369                 while (len) {
3370                         buffer_info = &tx_ring->buffer_info[i];
3371                         size = min(len, max_per_txd);
3372                         /* Workaround for premature desc write-backs
3373                          * in TSO mode.  Append 4-byte sentinel desc */
3374                         if (mss && f == (nr_frags-1) && size == len && size > 8)
3375                                 size -= 4;
3376
3377                         buffer_info->length = size;
3378                         buffer_info->time_stamp = jiffies;
3379                         buffer_info->dma =
3380                                 pci_map_page(adapter->pdev,
3381                                         frag->page,
3382                                         offset,
3383                                         size,
3384                                         PCI_DMA_TODEVICE);
3385                         if (pci_dma_mapping_error(buffer_info->dma)) {
3386                                 dev_err(&adapter->pdev->dev,
3387                                         "TX DMA page map failed\n");
3388                                 adapter->tx_dma_failed++;
3389                                 return -1;
3390                         }
3391
3392                         buffer_info->next_to_watch = i;
3393
3394                         len -= size;
3395                         offset += size;
3396                         count++;
3397
3398                         i++;
3399                         if (i == tx_ring->count)
3400                                 i = 0;
3401                 }
3402         }
3403
3404         if (i == 0)
3405                 i = tx_ring->count - 1;
3406         else
3407                 i--;
3408
3409         tx_ring->buffer_info[i].skb = skb;
3410         tx_ring->buffer_info[first].next_to_watch = i;
3411
3412         return count;
3413 }
3414
3415 static void e1000_tx_queue(struct e1000_adapter *adapter,
3416                            int tx_flags, int count)
3417 {
3418         struct e1000_ring *tx_ring = adapter->tx_ring;
3419         struct e1000_tx_desc *tx_desc = NULL;
3420         struct e1000_buffer *buffer_info;
3421         u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
3422         unsigned int i;
3423
3424         if (tx_flags & E1000_TX_FLAGS_TSO) {
3425                 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
3426                              E1000_TXD_CMD_TSE;
3427                 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
3428
3429                 if (tx_flags & E1000_TX_FLAGS_IPV4)
3430                         txd_upper |= E1000_TXD_POPTS_IXSM << 8;
3431         }
3432
3433         if (tx_flags & E1000_TX_FLAGS_CSUM) {
3434                 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
3435                 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
3436         }
3437
3438         if (tx_flags & E1000_TX_FLAGS_VLAN) {
3439                 txd_lower |= E1000_TXD_CMD_VLE;
3440                 txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
3441         }
3442
3443         i = tx_ring->next_to_use;
3444
3445         while (count--) {
3446                 buffer_info = &tx_ring->buffer_info[i];
3447                 tx_desc = E1000_TX_DESC(*tx_ring, i);
3448                 tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
3449                 tx_desc->lower.data =
3450                         cpu_to_le32(txd_lower | buffer_info->length);
3451                 tx_desc->upper.data = cpu_to_le32(txd_upper);
3452
3453                 i++;
3454                 if (i == tx_ring->count)
3455                         i = 0;
3456         }
3457
3458         tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
3459
3460         /*
3461          * Force memory writes to complete before letting h/w
3462          * know there are new descriptors to fetch.  (Only
3463          * applicable for weak-ordered memory model archs,
3464          * such as IA-64).
3465          */
3466         wmb();
3467
3468         tx_ring->next_to_use = i;
3469         writel(i, adapter->hw.hw_addr + tx_ring->tail);
3470         /*
3471          * we need this if more than one processor can write to our tail
3472          * at a time, it synchronizes IO on IA64/Altix systems
3473          */
3474         mmiowb();
3475 }
3476
3477 #define MINIMUM_DHCP_PACKET_SIZE 282
3478 static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
3479                                     struct sk_buff *skb)
3480 {
3481         struct e1000_hw *hw =  &adapter->hw;
3482         u16 length, offset;
3483
3484         if (vlan_tx_tag_present(skb)) {
3485                 if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id)
3486                     && (adapter->hw.mng_cookie.status &
3487                         E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
3488                         return 0;
3489         }
3490
3491         if (skb->len <= MINIMUM_DHCP_PACKET_SIZE)
3492                 return 0;
3493
3494         if (((struct ethhdr *) skb->data)->h_proto != htons(ETH_P_IP))
3495                 return 0;
3496
3497         {
3498                 const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data+14);
3499                 struct udphdr *udp;
3500
3501                 if (ip->protocol != IPPROTO_UDP)
3502                         return 0;
3503
3504                 udp = (struct udphdr *)((u8 *)ip + (ip->ihl << 2));
3505                 if (ntohs(udp->dest) != 67)
3506                         return 0;
3507
3508                 offset = (u8 *)udp + 8 - skb->data;
3509                 length = skb->len - offset;
3510                 return e1000e_mng_write_dhcp_info(hw, (u8 *)udp + 8, length);
3511         }
3512
3513         return 0;
3514 }
3515
3516 static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
3517 {
3518         struct e1000_adapter *adapter = netdev_priv(netdev);
3519
3520         netif_stop_queue(netdev);
3521         /*
3522          * Herbert's original patch had:
3523          *  smp_mb__after_netif_stop_queue();
3524          * but since that doesn't exist yet, just open code it.
3525          */
3526         smp_mb();
3527
3528         /*
3529          * We need to check again in a case another CPU has just
3530          * made room available.
3531          */
3532         if (e1000_desc_unused(adapter->tx_ring) < size)
3533                 return -EBUSY;
3534
3535         /* A reprieve! */
3536         netif_start_queue(netdev);
3537         ++adapter->restart_queue;
3538         return 0;
3539 }
3540
3541 static int e1000_maybe_stop_tx(struct net_device *netdev, int size)
3542 {
3543         struct e1000_adapter *adapter = netdev_priv(netdev);
3544
3545         if (e1000_desc_unused(adapter->tx_ring) >= size)
3546                 return 0;
3547         return __e1000_maybe_stop_tx(netdev, size);
3548 }
3549
3550 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
3551 static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
3552 {
3553         struct e1000_adapter *adapter = netdev_priv(netdev);
3554         struct e1000_ring *tx_ring = adapter->tx_ring;
3555         unsigned int first;
3556         unsigned int max_per_txd = E1000_MAX_PER_TXD;
3557         unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
3558         unsigned int tx_flags = 0;
3559         unsigned int len = skb->len - skb->data_len;
3560         unsigned long irq_flags;
3561         unsigned int nr_frags;
3562         unsigned int mss;
3563         int count = 0;
3564         int tso;
3565         unsigned int f;
3566
3567         if (test_bit(__E1000_DOWN, &adapter->state)) {
3568                 dev_kfree_skb_any(skb);
3569                 return NETDEV_TX_OK;
3570         }
3571
3572         if (skb->len <= 0) {
3573                 dev_kfree_skb_any(skb);
3574                 return NETDEV_TX_OK;
3575         }
3576
3577         mss = skb_shinfo(skb)->gso_size;
3578         /*
3579          * The controller does a simple calculation to
3580          * make sure there is enough room in the FIFO before
3581          * initiating the DMA for each buffer.  The calc is:
3582          * 4 = ceil(buffer len/mss).  To make sure we don't
3583          * overrun the FIFO, adjust the max buffer len if mss
3584          * drops.
3585          */
3586         if (mss) {
3587                 u8 hdr_len;
3588                 max_per_txd = min(mss << 2, max_per_txd);
3589                 max_txd_pwr = fls(max_per_txd) - 1;
3590
3591                 /*
3592                  * TSO Workaround for 82571/2/3 Controllers -- if skb->data
3593                  * points to just header, pull a few bytes of payload from
3594                  * frags into skb->data
3595                  */
3596                 hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
3597                 /*
3598                  * we do this workaround for ES2LAN, but it is un-necessary,
3599                  * avoiding it could save a lot of cycles
3600                  */
3601                 if (skb->data_len && (hdr_len == len)) {
3602                         unsigned int pull_size;
3603
3604                         pull_size = min((unsigned int)4, skb->data_len);
3605                         if (!__pskb_pull_tail(skb, pull_size)) {
3606                                 ndev_err(netdev,
3607                                          "__pskb_pull_tail failed.\n");
3608                                 dev_kfree_skb_any(skb);
3609                                 return NETDEV_TX_OK;
3610                         }
3611                         len = skb->len - skb->data_len;
3612                 }
3613         }
3614
3615         /* reserve a descriptor for the offload context */
3616         if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
3617                 count++;
3618         count++;
3619
3620         count += TXD_USE_COUNT(len, max_txd_pwr);
3621
3622         nr_frags = skb_shinfo(skb)->nr_frags;
3623         for (f = 0; f < nr_frags; f++)
3624                 count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
3625                                        max_txd_pwr);
3626
3627         if (adapter->hw.mac.tx_pkt_filtering)
3628                 e1000_transfer_dhcp_info(adapter, skb);
3629
3630         if (!spin_trylock_irqsave(&adapter->tx_queue_lock, irq_flags))
3631                 /* Collision - tell upper layer to requeue */
3632                 return NETDEV_TX_LOCKED;
3633
3634         /*
3635          * need: count + 2 desc gap to keep tail from touching
3636          * head, otherwise try next time
3637          */
3638         if (e1000_maybe_stop_tx(netdev, count + 2)) {
3639                 spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags);
3640                 return NETDEV_TX_BUSY;
3641         }
3642
3643         if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
3644                 tx_flags |= E1000_TX_FLAGS_VLAN;
3645                 tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
3646         }
3647
3648         first = tx_ring->next_to_use;
3649
3650         tso = e1000_tso(adapter, skb);
3651         if (tso < 0) {
3652                 dev_kfree_skb_any(skb);
3653                 spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags);
3654                 return NETDEV_TX_OK;
3655         }
3656
3657         if (tso)
3658                 tx_flags |= E1000_TX_FLAGS_TSO;
3659         else if (e1000_tx_csum(adapter, skb))
3660                 tx_flags |= E1000_TX_FLAGS_CSUM;
3661
3662         /*
3663          * Old method was to assume IPv4 packet by default if TSO was enabled.
3664          * 82571 hardware supports TSO capabilities for IPv6 as well...
3665          * no longer assume, we must.
3666          */
3667         if (skb->protocol == htons(ETH_P_IP))
3668                 tx_flags |= E1000_TX_FLAGS_IPV4;
3669
3670         count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss);
3671         if (count < 0) {
3672                 /* handle pci_map_single() error in e1000_tx_map */
3673                 dev_kfree_skb_any(skb);
3674                 spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags);
3675                 return NETDEV_TX_OK;
3676         }
3677
3678         e1000_tx_queue(adapter, tx_flags, count);
3679
3680         netdev->trans_start = jiffies;
3681
3682         /* Make sure there is space in the ring for the next send. */
3683         e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2);
3684
3685         spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags);
3686         return NETDEV_TX_OK;
3687 }
3688
3689 /**
3690  * e1000_tx_timeout - Respond to a Tx Hang
3691  * @netdev: network interface device structure
3692  **/
3693 static void e1000_tx_timeout(struct net_device *netdev)
3694 {
3695         struct e1000_adapter *adapter = netdev_priv(netdev);
3696
3697         /* Do the reset outside of interrupt context */
3698         adapter->tx_timeout_count++;
3699         schedule_work(&adapter->reset_task);
3700 }
3701
3702 static void e1000_reset_task(struct work_struct *work)
3703 {
3704         struct e1000_adapter *adapter;
3705         adapter = container_of(work, struct e1000_adapter, reset_task);
3706
3707         e1000e_reinit_locked(adapter);
3708 }
3709
3710 /**
3711  * e1000_get_stats - Get System Network Statistics
3712  * @netdev: network interface device structure
3713  *
3714  * Returns the address of the device statistics structure.
3715  * The statistics are actually updated from the timer callback.
3716  **/
3717 static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
3718 {
3719         struct e1000_adapter *adapter = netdev_priv(netdev);
3720
3721         /* only return the current stats */
3722         return &adapter->net_stats;
3723 }
3724
3725 /**
3726  * e1000_change_mtu - Change the Maximum Transfer Unit
3727  * @netdev: network interface device structure
3728  * @new_mtu: new value for maximum frame size
3729  *
3730  * Returns 0 on success, negative on failure
3731  **/
3732 static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
3733 {
3734         struct e1000_adapter *adapter = netdev_priv(netdev);
3735         int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
3736
3737         if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
3738             (max_frame > MAX_JUMBO_FRAME_SIZE)) {
3739                 ndev_err(netdev, "Invalid MTU setting\n");
3740                 return -EINVAL;
3741         }
3742
3743         /* Jumbo frame size limits */
3744         if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) {
3745                 if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
3746                         ndev_err(netdev, "Jumbo Frames not supported.\n");
3747                         return -EINVAL;
3748                 }
3749                 if (adapter->hw.phy.type == e1000_phy_ife) {
3750                         ndev_err(netdev, "Jumbo Frames not supported.\n");
3751                         return -EINVAL;
3752                 }
3753         }
3754
3755 #define MAX_STD_JUMBO_FRAME_SIZE 9234
3756         if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
3757                 ndev_err(netdev, "MTU > 9216 not supported.\n");
3758                 return -EINVAL;
3759         }
3760
3761         while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
3762                 msleep(1);
3763         /* e1000e_down has a dependency on max_frame_size */
3764         adapter->max_frame_size = max_frame;
3765         if (netif_running(netdev))
3766                 e1000e_down(adapter);
3767
3768         /*
3769          * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
3770          * means we reserve 2 more, this pushes us to allocate from the next
3771          * larger slab size.
3772          * i.e. RXBUFFER_2048 --> size-4096 slab
3773          * However with the new *_jumbo_rx* routines, jumbo receives will use
3774          * fragmented skbs
3775          */
3776
3777         if (max_frame <= 256)
3778                 adapter->rx_buffer_len = 256;
3779         else if (max_frame <= 512)
3780                 adapter->rx_buffer_len = 512;
3781         else if (max_frame <= 1024)
3782                 adapter->rx_buffer_len = 1024;
3783         else if (max_frame <= 2048)
3784                 adapter->rx_buffer_len = 2048;
3785         else
3786                 adapter->rx_buffer_len = 4096;
3787
3788         /* adjust allocation if LPE protects us, and we aren't using SBP */
3789         if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
3790              (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
3791                 adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
3792                                          + ETH_FCS_LEN;
3793
3794         ndev_info(netdev, "changing MTU from %d to %d\n",
3795                 netdev->mtu, new_mtu);
3796         netdev->mtu = new_mtu;
3797
3798         if (netif_running(netdev))
3799                 e1000e_up(adapter);
3800         else
3801                 e1000e_reset(adapter);
3802
3803         clear_bit(__E1000_RESETTING, &adapter->state);
3804
3805         return 0;
3806 }
3807
3808 static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
3809                            int cmd)
3810 {
3811         struct e1000_adapter *adapter = netdev_priv(netdev);
3812         struct mii_ioctl_data *data = if_mii(ifr);
3813
3814         if (adapter->hw.phy.media_type != e1000_media_type_copper)
3815                 return -EOPNOTSUPP;
3816
3817         switch (cmd) {
3818         case SIOCGMIIPHY:
3819                 data->phy_id = adapter->hw.phy.addr;
3820                 break;
3821         case SIOCGMIIREG:
3822                 if (!capable(CAP_NET_ADMIN))
3823                         return -EPERM;
3824                 switch (data->reg_num & 0x1F) {
3825                 case MII_BMCR:
3826                         data->val_out = adapter->phy_regs.bmcr;
3827                         break;
3828                 case MII_BMSR:
3829                         data->val_out = adapter->phy_regs.bmsr;
3830                         break;
3831                 case MII_PHYSID1:
3832                         data->val_out = (adapter->hw.phy.id >> 16);
3833                         break;
3834                 case MII_PHYSID2:
3835                         data->val_out = (adapter->hw.phy.id & 0xFFFF);
3836                         break;
3837                 case MII_ADVERTISE:
3838                         data->val_out = adapter->phy_regs.advertise;
3839                         break;
3840                 case MII_LPA:
3841                         data->val_out = adapter->phy_regs.lpa;
3842                         break;
3843                 case MII_EXPANSION:
3844                         data->val_out = adapter->phy_regs.expansion;
3845                         break;
3846                 case MII_CTRL1000:
3847                         data->val_out = adapter->phy_regs.ctrl1000;
3848                         break;
3849                 case MII_STAT1000:
3850                         data->val_out = adapter->phy_regs.stat1000;
3851                         break;
3852                 case MII_ESTATUS:
3853                         data->val_out = adapter->phy_regs.estatus;
3854                         break;
3855                 default:
3856                         return -EIO;
3857                 }
3858                 break;
3859         case SIOCSMIIREG:
3860         default:
3861                 return -EOPNOTSUPP;
3862         }
3863         return 0;
3864 }
3865
3866 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
3867 {
3868         switch (cmd) {
3869         case SIOCGMIIPHY:
3870         case SIOCGMIIREG:
3871         case SIOCSMIIREG:
3872                 return e1000_mii_ioctl(netdev, ifr, cmd);
3873         default:
3874                 return -EOPNOTSUPP;
3875         }
3876 }
3877
3878 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
3879 {
3880         struct net_device *netdev = pci_get_drvdata(pdev);
3881         struct e1000_adapter *adapter = netdev_priv(netdev);
3882         struct e1000_hw *hw = &adapter->hw;
3883         u32 ctrl, ctrl_ext, rctl, status;
3884         u32 wufc = adapter->wol;
3885         int retval = 0;
3886
3887         netif_device_detach(netdev);
3888
3889         if (netif_running(netdev)) {
3890                 WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
3891                 e1000e_down(adapter);
3892                 e1000_free_irq(adapter);
3893         }
3894
3895         retval = pci_save_state(pdev);
3896         if (retval)
3897                 return retval;
3898
3899         status = er32(STATUS);
3900         if (status & E1000_STATUS_LU)
3901                 wufc &= ~E1000_WUFC_LNKC;
3902
3903         if (wufc) {
3904                 e1000_setup_rctl(adapter);
3905                 e1000_set_multi(netdev);
3906
3907                 /* turn on all-multi mode if wake on multicast is enabled */
3908                 if (wufc & E1000_WUFC_MC) {
3909                         rctl = er32(RCTL);
3910                         rctl |= E1000_RCTL_MPE;
3911                         ew32(RCTL, rctl);
3912                 }
3913
3914                 ctrl = er32(CTRL);
3915                 /* advertise wake from D3Cold */
3916                 #define E1000_CTRL_ADVD3WUC 0x00100000
3917                 /* phy power management enable */
3918                 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
3919                 ctrl |= E1000_CTRL_ADVD3WUC |
3920                         E1000_CTRL_EN_PHY_PWR_MGMT;
3921                 ew32(CTRL, ctrl);
3922
3923                 if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
3924                     adapter->hw.phy.media_type ==
3925                     e1000_media_type_internal_serdes) {
3926                         /* keep the laser running in D3 */
3927                         ctrl_ext = er32(CTRL_EXT);
3928                         ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
3929                         ew32(CTRL_EXT, ctrl_ext);
3930                 }
3931
3932                 if (adapter->flags & FLAG_IS_ICH)
3933                         e1000e_disable_gig_wol_ich8lan(&adapter->hw);
3934
3935                 /* Allow time for pending master requests to run */
3936                 e1000e_disable_pcie_master(&adapter->hw);
3937
3938                 ew32(WUC, E1000_WUC_PME_EN);
3939                 ew32(WUFC, wufc);
3940                 pci_enable_wake(pdev, PCI_D3hot, 1);
3941                 pci_enable_wake(pdev, PCI_D3cold, 1);
3942         } else {
3943                 ew32(WUC, 0);
3944                 ew32(WUFC, 0);
3945                 pci_enable_wake(pdev, PCI_D3hot, 0);
3946                 pci_enable_wake(pdev, PCI_D3cold, 0);
3947         }
3948
3949         /* make sure adapter isn't asleep if manageability is enabled */
3950         if (adapter->flags & FLAG_MNG_PT_ENABLED) {
3951                 pci_enable_wake(pdev, PCI_D3hot, 1);
3952                 pci_enable_wake(pdev, PCI_D3cold, 1);
3953         }
3954
3955         if (adapter->hw.phy.type == e1000_phy_igp_3)
3956                 e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
3957
3958         /*
3959          * Release control of h/w to f/w.  If f/w is AMT enabled, this
3960          * would have already happened in close and is redundant.
3961          */
3962         e1000_release_hw_control(adapter);
3963
3964         pci_disable_device(pdev);
3965
3966         pci_set_power_state(pdev, pci_choose_state(pdev, state));
3967
3968         return 0;
3969 }
3970
3971 static void e1000e_disable_l1aspm(struct pci_dev *pdev)
3972 {
3973         int pos;
3974         u16 val;
3975
3976         /*
3977          * 82573 workaround - disable L1 ASPM on mobile chipsets
3978          *
3979          * L1 ASPM on various mobile (ich7) chipsets do not behave properly
3980          * resulting in lost data or garbage information on the pci-e link
3981          * level. This could result in (false) bad EEPROM checksum errors,
3982          * long ping times (up to 2s) or even a system freeze/hang.
3983          *
3984          * Unfortunately this feature saves about 1W power consumption when
3985          * active.
3986          */
3987         pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
3988         pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, &val);
3989         if (val & 0x2) {
3990                 dev_warn(&pdev->dev, "Disabling L1 ASPM\n");
3991                 val &= ~0x2;
3992                 pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, val);
3993         }
3994 }
3995
3996 #ifdef CONFIG_PM
3997 static int e1000_resume(struct pci_dev *pdev)
3998 {
3999         struct net_device *netdev = pci_get_drvdata(pdev);
4000         struct e1000_adapter *adapter = netdev_priv(netdev);
4001         struct e1000_hw *hw = &adapter->hw;
4002         u32 err;
4003
4004         pci_set_power_state(pdev, PCI_D0);
4005         pci_restore_state(pdev);
4006         e1000e_disable_l1aspm(pdev);
4007
4008         if (adapter->need_ioport)
4009                 err = pci_enable_device(pdev);
4010         else
4011                 err = pci_enable_device_mem(pdev);
4012         if (err) {
4013                 dev_err(&pdev->dev,
4014                         "Cannot enable PCI device from suspend\n");
4015                 return err;
4016         }
4017
4018         pci_set_master(pdev);
4019
4020         pci_enable_wake(pdev, PCI_D3hot, 0);
4021         pci_enable_wake(pdev, PCI_D3cold, 0);
4022
4023         if (netif_running(netdev)) {
4024                 err = e1000_request_irq(adapter);
4025                 if (err)
4026                         return err;
4027         }
4028
4029         e1000e_power_up_phy(adapter);
4030         e1000e_reset(adapter);
4031         ew32(WUS, ~0);
4032
4033         e1000_init_manageability(adapter);
4034
4035         if (netif_running(netdev))
4036                 e1000e_up(adapter);
4037
4038         netif_device_attach(netdev);
4039
4040         /*
4041          * If the controller has AMT, do not set DRV_LOAD until the interface
4042          * is up.  For all other cases, let the f/w know that the h/w is now
4043          * under the control of the driver.
4044          */
4045         if (!(adapter->flags & FLAG_HAS_AMT) || !e1000e_check_mng_mode(&adapter->hw))
4046                 e1000_get_hw_control(adapter);
4047
4048         return 0;
4049 }
4050 #endif
4051
4052 static void e1000_shutdown(struct pci_dev *pdev)
4053 {
4054         e1000_suspend(pdev, PMSG_SUSPEND);
4055 }
4056
4057 #ifdef CONFIG_NET_POLL_CONTROLLER
4058 /*
4059  * Polling 'interrupt' - used by things like netconsole to send skbs
4060  * without having to re-enable interrupts. It's not called while
4061  * the interrupt routine is executing.
4062  */
4063 static void e1000_netpoll(struct net_device *netdev)
4064 {
4065         struct e1000_adapter *adapter = netdev_priv(netdev);
4066
4067         disable_irq(adapter->pdev->irq);
4068         e1000_intr(adapter->pdev->irq, netdev);
4069
4070         e1000_clean_tx_irq(adapter);
4071
4072         enable_irq(adapter->pdev->irq);
4073 }
4074 #endif
4075
4076 /**
4077  * e1000_io_error_detected - called when PCI error is detected
4078  * @pdev: Pointer to PCI device
4079  * @state: The current pci connection state
4080  *
4081  * This function is called after a PCI bus error affecting
4082  * this device has been detected.
4083  */
4084 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
4085                                                 pci_channel_state_t state)
4086 {
4087         struct net_device *netdev = pci_get_drvdata(pdev);
4088         struct e1000_adapter *adapter = netdev_priv(netdev);
4089
4090         netif_device_detach(netdev);
4091
4092         if (netif_running(netdev))
4093                 e1000e_down(adapter);
4094         pci_disable_device(pdev);
4095
4096         /* Request a slot slot reset. */
4097         return PCI_ERS_RESULT_NEED_RESET;
4098 }
4099
4100 /**
4101  * e1000_io_slot_reset - called after the pci bus has been reset.
4102  * @pdev: Pointer to PCI device
4103  *
4104  * Restart the card from scratch, as if from a cold-boot. Implementation
4105  * resembles the first-half of the e1000_resume routine.
4106  */
4107 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
4108 {
4109         struct net_device *netdev = pci_get_drvdata(pdev);
4110         struct e1000_adapter *adapter = netdev_priv(netdev);
4111         struct e1000_hw *hw = &adapter->hw;
4112         int err;
4113
4114         e1000e_disable_l1aspm(pdev);
4115         if (adapter->need_ioport)
4116                 err = pci_enable_device(pdev);
4117         else
4118                 err = pci_enable_device_mem(pdev);
4119         if (err) {
4120                 dev_err(&pdev->dev,
4121                         "Cannot re-enable PCI device after reset.\n");
4122                 return PCI_ERS_RESULT_DISCONNECT;
4123         }
4124         pci_set_master(pdev);
4125         pci_restore_state(pdev);
4126
4127         pci_enable_wake(pdev, PCI_D3hot, 0);
4128         pci_enable_wake(pdev, PCI_D3cold, 0);
4129
4130         e1000e_reset(adapter);
4131         ew32(WUS, ~0);
4132
4133         return PCI_ERS_RESULT_RECOVERED;
4134 }
4135
4136 /**
4137  * e1000_io_resume - called when traffic can start flowing again.
4138  * @pdev: Pointer to PCI device
4139  *
4140  * This callback is called when the error recovery driver tells us that
4141  * its OK to resume normal operation. Implementation resembles the
4142  * second-half of the e1000_resume routine.
4143  */
4144 static void e1000_io_resume(struct pci_dev *pdev)
4145 {
4146         struct net_device *netdev = pci_get_drvdata(pdev);
4147         struct e1000_adapter *adapter = netdev_priv(netdev);
4148
4149         e1000_init_manageability(adapter);
4150
4151         if (netif_running(netdev)) {
4152                 if (e1000e_up(adapter)) {
4153                         dev_err(&pdev->dev,
4154                                 "can't bring device back up after reset\n");
4155                         return;
4156                 }
4157         }
4158
4159         netif_device_attach(netdev);
4160
4161         /*
4162          * If the controller has AMT, do not set DRV_LOAD until the interface
4163          * is up.  For all other cases, let the f/w know that the h/w is now
4164          * under the control of the driver.
4165          */
4166         if (!(adapter->flags & FLAG_HAS_AMT) ||
4167             !e1000e_check_mng_mode(&adapter->hw))
4168                 e1000_get_hw_control(adapter);
4169
4170 }
4171
4172 static void e1000_print_device_info(struct e1000_adapter *adapter)
4173 {
4174         struct e1000_hw *hw = &adapter->hw;
4175         struct net_device *netdev = adapter->netdev;
4176         u32 pba_num;
4177
4178         /* print bus type/speed/width info */
4179         ndev_info(netdev, "(PCI Express:2.5GB/s:%s) "
4180                   "%02x:%02x:%02x:%02x:%02x:%02x\n",
4181                   /* bus width */
4182                  ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
4183                   "Width x1"),
4184                   /* MAC address */
4185                   netdev->dev_addr[0], netdev->dev_addr[1],
4186                   netdev->dev_addr[2], netdev->dev_addr[3],
4187                   netdev->dev_addr[4], netdev->dev_addr[5]);
4188         ndev_info(netdev, "Intel(R) PRO/%s Network Connection\n",
4189                   (hw->phy.type == e1000_phy_ife)
4190                    ? "10/100" : "1000");
4191         e1000e_read_pba_num(hw, &pba_num);
4192         ndev_info(netdev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
4193                   hw->mac.type, hw->phy.type,
4194                   (pba_num >> 8), (pba_num & 0xff));
4195 }
4196
4197 /**
4198  * e1000e_is_need_ioport - determine if an adapter needs ioport resources or not
4199  * @pdev: PCI device information struct
4200  *
4201  * Returns true if an adapters needs ioport resources
4202  **/
4203 static int e1000e_is_need_ioport(struct pci_dev *pdev)
4204 {
4205         switch (pdev->device) {
4206         /* Currently there are no adapters that need ioport resources */
4207         default:
4208                 return false;
4209         }
4210 }
4211
4212 /**
4213  * e1000_probe - Device Initialization Routine
4214  * @pdev: PCI device information struct
4215  * @ent: entry in e1000_pci_tbl
4216  *
4217  * Returns 0 on success, negative on failure
4218  *
4219  * e1000_probe initializes an adapter identified by a pci_dev structure.
4220  * The OS initialization, configuring of the adapter private structure,
4221  * and a hardware reset occur.
4222  **/
4223 static int __devinit e1000_probe(struct pci_dev *pdev,
4224                                  const struct pci_device_id *ent)
4225 {
4226         struct net_device *netdev;
4227         struct e1000_adapter *adapter;
4228         struct e1000_hw *hw;
4229         const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
4230         resource_size_t mmio_start, mmio_len;
4231         resource_size_t flash_start, flash_len;
4232
4233         static int cards_found;
4234         int i, err, pci_using_dac;
4235         u16 eeprom_data = 0;
4236         u16 eeprom_apme_mask = E1000_EEPROM_APME;
4237         int bars, need_ioport;
4238
4239         e1000e_disable_l1aspm(pdev);
4240
4241         /* do not allocate ioport bars when not needed */
4242         need_ioport = e1000e_is_need_ioport(pdev);
4243         if (need_ioport) {
4244                 bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
4245                 err = pci_enable_device(pdev);
4246         } else {
4247                 bars = pci_select_bars(pdev, IORESOURCE_MEM);
4248                 err = pci_enable_device_mem(pdev);
4249         }
4250         if (err)
4251                 return err;
4252
4253         pci_using_dac = 0;
4254         err = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
4255         if (!err) {
4256                 err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
4257                 if (!err)
4258                         pci_using_dac = 1;
4259         } else {
4260                 err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
4261                 if (err) {
4262                         err = pci_set_consistent_dma_mask(pdev,
4263                                                           DMA_32BIT_MASK);
4264                         if (err) {
4265                                 dev_err(&pdev->dev, "No usable DMA "
4266                                         "configuration, aborting\n");
4267                                 goto err_dma;
4268                         }
4269                 }
4270         }
4271
4272         err = pci_request_selected_regions(pdev, bars, e1000e_driver_name);
4273         if (err)
4274                 goto err_pci_reg;
4275
4276         pci_set_master(pdev);
4277         pci_save_state(pdev);
4278
4279         err = -ENOMEM;
4280         netdev = alloc_etherdev(sizeof(struct e1000_adapter));
4281         if (!netdev)
4282                 goto err_alloc_etherdev;
4283
4284         SET_NETDEV_DEV(netdev, &pdev->dev);
4285
4286         pci_set_drvdata(pdev, netdev);
4287         adapter = netdev_priv(netdev);
4288         hw = &adapter->hw;
4289         adapter->netdev = netdev;
4290         adapter->pdev = pdev;
4291         adapter->ei = ei;
4292         adapter->pba = ei->pba;
4293         adapter->flags = ei->flags;
4294         adapter->hw.adapter = adapter;
4295         adapter->hw.mac.type = ei->mac;
4296         adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
4297         adapter->bars = bars;
4298         adapter->need_ioport = need_ioport;
4299
4300         mmio_start = pci_resource_start(pdev, 0);
4301         mmio_len = pci_resource_len(pdev, 0);
4302
4303         err = -EIO;
4304         adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
4305         if (!adapter->hw.hw_addr)
4306                 goto err_ioremap;
4307
4308         if ((adapter->flags & FLAG_HAS_FLASH) &&
4309             (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
4310                 flash_start = pci_resource_start(pdev, 1);
4311                 flash_len = pci_resource_len(pdev, 1);
4312                 adapter->hw.flash_address = ioremap(flash_start, flash_len);
4313                 if (!adapter->hw.flash_address)
4314                         goto err_flashmap;
4315         }
4316
4317         /* construct the net_device struct */
4318         netdev->open                    = &e1000_open;
4319         netdev->stop                    = &e1000_close;
4320         netdev->hard_start_xmit         = &e1000_xmit_frame;
4321         netdev->get_stats               = &e1000_get_stats;
4322         netdev->set_multicast_list      = &e1000_set_multi;
4323         netdev->set_mac_address         = &e1000_set_mac;
4324         netdev->change_mtu              = &e1000_change_mtu;
4325         netdev->do_ioctl                = &e1000_ioctl;
4326         e1000e_set_ethtool_ops(netdev);
4327         netdev->tx_timeout              = &e1000_tx_timeout;
4328         netdev->watchdog_timeo          = 5 * HZ;
4329         netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
4330         netdev->vlan_rx_register        = e1000_vlan_rx_register;
4331         netdev->vlan_rx_add_vid         = e1000_vlan_rx_add_vid;
4332         netdev->vlan_rx_kill_vid        = e1000_vlan_rx_kill_vid;
4333 #ifdef CONFIG_NET_POLL_CONTROLLER
4334         netdev->poll_controller         = e1000_netpoll;
4335 #endif
4336         strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
4337
4338         netdev->mem_start = mmio_start;
4339         netdev->mem_end = mmio_start + mmio_len;
4340
4341         adapter->bd_number = cards_found++;
4342
4343         /* setup adapter struct */
4344         err = e1000_sw_init(adapter);
4345         if (err)
4346                 goto err_sw_init;
4347
4348         err = -EIO;
4349
4350         memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
4351         memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
4352         memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
4353
4354         err = ei->get_variants(adapter);
4355         if (err)
4356                 goto err_hw_init;
4357
4358         hw->mac.ops.get_bus_info(&adapter->hw);
4359
4360         adapter->hw.phy.autoneg_wait_to_complete = 0;
4361
4362         /* Copper options */
4363         if (adapter->hw.phy.media_type == e1000_media_type_copper) {
4364                 adapter->hw.phy.mdix = AUTO_ALL_MODES;
4365                 adapter->hw.phy.disable_polarity_correction = 0;
4366                 adapter->hw.phy.ms_type = e1000_ms_hw_default;
4367         }
4368
4369         if (e1000_check_reset_block(&adapter->hw))
4370                 ndev_info(netdev,
4371                           "PHY reset is blocked due to SOL/IDER session.\n");
4372
4373         netdev->features = NETIF_F_SG |
4374                            NETIF_F_HW_CSUM |
4375                            NETIF_F_HW_VLAN_TX |
4376                            NETIF_F_HW_VLAN_RX;
4377
4378         if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
4379                 netdev->features |= NETIF_F_HW_VLAN_FILTER;
4380
4381         netdev->features |= NETIF_F_TSO;
4382         netdev->features |= NETIF_F_TSO6;
4383
4384         netdev->vlan_features |= NETIF_F_TSO;
4385         netdev->vlan_features |= NETIF_F_TSO6;
4386         netdev->vlan_features |= NETIF_F_HW_CSUM;
4387         netdev->vlan_features |= NETIF_F_SG;
4388
4389         if (pci_using_dac)
4390                 netdev->features |= NETIF_F_HIGHDMA;
4391
4392         /*
4393          * We should not be using LLTX anymore, but we are still Tx faster with
4394          * it.
4395          */
4396         netdev->features |= NETIF_F_LLTX;
4397
4398         if (e1000e_enable_mng_pass_thru(&adapter->hw))
4399                 adapter->flags |= FLAG_MNG_PT_ENABLED;
4400
4401         /*
4402          * before reading the NVM, reset the controller to
4403          * put the device in a known good starting state
4404          */
4405         adapter->hw.mac.ops.reset_hw(&adapter->hw);
4406
4407         /*
4408          * systems with ASPM and others may see the checksum fail on the first
4409          * attempt. Let's give it a few tries
4410          */
4411         for (i = 0;; i++) {
4412                 if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
4413                         break;
4414                 if (i == 2) {
4415                         ndev_err(netdev, "The NVM Checksum Is Not Valid\n");
4416                         err = -EIO;
4417                         goto err_eeprom;
4418                 }
4419         }
4420
4421         /* copy the MAC address out of the NVM */
4422         if (e1000e_read_mac_addr(&adapter->hw))
4423                 ndev_err(netdev, "NVM Read Error while reading MAC address\n");
4424
4425         memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
4426         memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
4427
4428         if (!is_valid_ether_addr(netdev->perm_addr)) {
4429                 ndev_err(netdev, "Invalid MAC Address: "
4430                          "%02x:%02x:%02x:%02x:%02x:%02x\n",
4431                          netdev->perm_addr[0], netdev->perm_addr[1],
4432                          netdev->perm_addr[2], netdev->perm_addr[3],
4433                          netdev->perm_addr[4], netdev->perm_addr[5]);
4434                 err = -EIO;
4435                 goto err_eeprom;
4436         }
4437
4438         init_timer(&adapter->watchdog_timer);
4439         adapter->watchdog_timer.function = &e1000_watchdog;
4440         adapter->watchdog_timer.data = (unsigned long) adapter;
4441
4442         init_timer(&adapter->phy_info_timer);
4443         adapter->phy_info_timer.function = &e1000_update_phy_info;
4444         adapter->phy_info_timer.data = (unsigned long) adapter;
4445
4446         INIT_WORK(&adapter->reset_task, e1000_reset_task);
4447         INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
4448
4449         e1000e_check_options(adapter);
4450
4451         /* Initialize link parameters. User can change them with ethtool */
4452         adapter->hw.mac.autoneg = 1;
4453         adapter->fc_autoneg = 1;
4454         adapter->hw.fc.original_type = e1000_fc_default;
4455         adapter->hw.fc.type = e1000_fc_default;
4456         adapter->hw.phy.autoneg_advertised = 0x2f;
4457
4458         /* ring size defaults */
4459         adapter->rx_ring->count = 256;
4460         adapter->tx_ring->count = 256;
4461
4462         /*
4463          * Initial Wake on LAN setting - If APM wake is enabled in
4464          * the EEPROM, enable the ACPI Magic Packet filter
4465          */
4466         if (adapter->flags & FLAG_APME_IN_WUC) {
4467                 /* APME bit in EEPROM is mapped to WUC.APME */
4468                 eeprom_data = er32(WUC);
4469                 eeprom_apme_mask = E1000_WUC_APME;
4470         } else if (adapter->flags & FLAG_APME_IN_CTRL3) {
4471                 if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
4472                     (adapter->hw.bus.func == 1))
4473                         e1000_read_nvm(&adapter->hw,
4474                                 NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
4475                 else
4476                         e1000_read_nvm(&adapter->hw,
4477                                 NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
4478         }
4479
4480         /* fetch WoL from EEPROM */
4481         if (eeprom_data & eeprom_apme_mask)
4482                 adapter->eeprom_wol |= E1000_WUFC_MAG;
4483
4484         /*
4485          * now that we have the eeprom settings, apply the special cases
4486          * where the eeprom may be wrong or the board simply won't support
4487          * wake on lan on a particular port
4488          */
4489         if (!(adapter->flags & FLAG_HAS_WOL))
4490                 adapter->eeprom_wol = 0;
4491
4492         /* initialize the wol settings based on the eeprom settings */
4493         adapter->wol = adapter->eeprom_wol;
4494
4495         /* reset the hardware with the new settings */
4496         e1000e_reset(adapter);
4497
4498         /*
4499          * If the controller has AMT, do not set DRV_LOAD until the interface
4500          * is up.  For all other cases, let the f/w know that the h/w is now
4501          * under the control of the driver.
4502          */
4503         if (!(adapter->flags & FLAG_HAS_AMT) ||
4504             !e1000e_check_mng_mode(&adapter->hw))
4505                 e1000_get_hw_control(adapter);
4506
4507         /* tell the stack to leave us alone until e1000_open() is called */
4508         netif_carrier_off(netdev);
4509         netif_tx_stop_all_queues(netdev);
4510
4511         strcpy(netdev->name, "eth%d");
4512         err = register_netdev(netdev);
4513         if (err)
4514                 goto err_register;
4515
4516         e1000_print_device_info(adapter);
4517
4518         return 0;
4519
4520 err_register:
4521 err_hw_init:
4522         e1000_release_hw_control(adapter);
4523 err_eeprom:
4524         if (!e1000_check_reset_block(&adapter->hw))
4525                 e1000_phy_hw_reset(&adapter->hw);
4526
4527         if (adapter->hw.flash_address)
4528                 iounmap(adapter->hw.flash_address);
4529
4530 err_flashmap:
4531         kfree(adapter->tx_ring);
4532         kfree(adapter->rx_ring);
4533 err_sw_init:
4534         iounmap(adapter->hw.hw_addr);
4535 err_ioremap:
4536         free_netdev(netdev);
4537 err_alloc_etherdev:
4538         pci_release_selected_regions(pdev, bars);
4539 err_pci_reg:
4540 err_dma:
4541         pci_disable_device(pdev);
4542         return err;
4543 }
4544
4545 /**
4546  * e1000_remove - Device Removal Routine
4547  * @pdev: PCI device information struct
4548  *
4549  * e1000_remove is called by the PCI subsystem to alert the driver
4550  * that it should release a PCI device.  The could be caused by a
4551  * Hot-Plug event, or because the driver is going to be removed from
4552  * memory.
4553  **/
4554 static void __devexit e1000_remove(struct pci_dev *pdev)
4555 {
4556         struct net_device *netdev = pci_get_drvdata(pdev);
4557         struct e1000_adapter *adapter = netdev_priv(netdev);
4558
4559         /*
4560          * flush_scheduled work may reschedule our watchdog task, so
4561          * explicitly disable watchdog tasks from being rescheduled
4562          */
4563         set_bit(__E1000_DOWN, &adapter->state);
4564         del_timer_sync(&adapter->watchdog_timer);
4565         del_timer_sync(&adapter->phy_info_timer);
4566
4567         flush_scheduled_work();
4568
4569         /*
4570          * Release control of h/w to f/w.  If f/w is AMT enabled, this
4571          * would have already happened in close and is redundant.
4572          */
4573         e1000_release_hw_control(adapter);
4574
4575         unregister_netdev(netdev);
4576
4577         if (!e1000_check_reset_block(&adapter->hw))
4578                 e1000_phy_hw_reset(&adapter->hw);
4579
4580         kfree(adapter->tx_ring);
4581         kfree(adapter->rx_ring);
4582
4583         iounmap(adapter->hw.hw_addr);
4584         if (adapter->hw.flash_address)
4585                 iounmap(adapter->hw.flash_address);
4586         pci_release_selected_regions(pdev, adapter->bars);
4587
4588         free_netdev(netdev);
4589
4590         pci_disable_device(pdev);
4591 }
4592
4593 /* PCI Error Recovery (ERS) */
4594 static struct pci_error_handlers e1000_err_handler = {
4595         .error_detected = e1000_io_error_detected,
4596         .slot_reset = e1000_io_slot_reset,
4597         .resume = e1000_io_resume,
4598 };
4599
4600 static struct pci_device_id e1000_pci_tbl[] = {
4601         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
4602         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
4603         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
4604         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 },
4605         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
4606         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
4607         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
4608         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 },
4609         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 },
4610
4611         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 },
4612         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 },
4613         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 },
4614         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 },
4615
4616         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 },
4617         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 },
4618         { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 },
4619
4620         { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT),
4621           board_80003es2lan },
4622         { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT),
4623           board_80003es2lan },
4624         { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_DPT),
4625           board_80003es2lan },
4626         { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT),
4627           board_80003es2lan },
4628
4629         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan },
4630         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan },
4631         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan },
4632         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_AMT), board_ich8lan },
4633         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan },
4634         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan },
4635         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan },
4636
4637         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan },
4638         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
4639         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },
4640         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan },
4641         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan },
4642         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan },
4643         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan },
4644         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan },
4645
4646         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan },
4647         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan },
4648         { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan },
4649
4650         { }     /* terminate list */
4651 };
4652 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
4653
4654 /* PCI Device API Driver */
4655 static struct pci_driver e1000_driver = {
4656         .name     = e1000e_driver_name,
4657         .id_table = e1000_pci_tbl,
4658         .probe    = e1000_probe,
4659         .remove   = __devexit_p(e1000_remove),
4660 #ifdef CONFIG_PM
4661         /* Power Management Hooks */
4662         .suspend  = e1000_suspend,
4663         .resume   = e1000_resume,
4664 #endif
4665         .shutdown = e1000_shutdown,
4666         .err_handler = &e1000_err_handler
4667 };
4668
4669 /**
4670  * e1000_init_module - Driver Registration Routine
4671  *
4672  * e1000_init_module is the first routine called when the driver is
4673  * loaded. All it does is register with the PCI subsystem.
4674  **/
4675 static int __init e1000_init_module(void)
4676 {
4677         int ret;
4678         printk(KERN_INFO "%s: Intel(R) PRO/1000 Network Driver - %s\n",
4679                e1000e_driver_name, e1000e_driver_version);
4680         printk(KERN_INFO "%s: Copyright (c) 1999-2008 Intel Corporation.\n",
4681                e1000e_driver_name);
4682         ret = pci_register_driver(&e1000_driver);
4683         pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY, e1000e_driver_name,
4684                                PM_QOS_DEFAULT_VALUE);
4685
4686         return ret;
4687 }
4688 module_init(e1000_init_module);
4689
4690 /**
4691  * e1000_exit_module - Driver Exit Cleanup Routine
4692  *
4693  * e1000_exit_module is called just before the driver is removed
4694  * from memory.
4695  **/
4696 static void __exit e1000_exit_module(void)
4697 {
4698         pci_unregister_driver(&e1000_driver);
4699         pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY, e1000e_driver_name);
4700 }
4701 module_exit(e1000_exit_module);
4702
4703
4704 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
4705 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
4706 MODULE_LICENSE("GPL");
4707 MODULE_VERSION(DRV_VERSION);
4708
4709 /* e1000_main.c */