drivers/net/e1000/e1000_main.c

   1 /*******************************************************************************
   2
   3   Intel PRO/1000 Linux driver
   4   Copyright(c) 1999 - 2006 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   Linux NICS <linux.nics@intel.com>
  24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27 *******************************************************************************/
  28
  29 #include "e1000.h"
  30 #include <net/ip6_checksum.h>
  31
  32 char e1000_driver_name[] = "e1000";
  33 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
  34 #ifndef CONFIG_E1000_NAPI
  35 #define DRIVERNAPI
  36 #else
  37 #define DRIVERNAPI "-NAPI"
  38 #endif
  39 #define DRV_VERSION "7.3.15-k2"DRIVERNAPI
  40 char e1000_driver_version[] = DRV_VERSION;
  41 static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
  42
  43 /* e1000_pci_tbl - PCI Device ID Table
  44  *
  45  * Last entry must be all 0s
  46  *
  47  * Macro expands to...
  48  *   {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
  49  */
  50 static struct pci_device_id e1000_pci_tbl[] = {
  51         INTEL_E1000_ETHERNET_DEVICE(0x1000),
  52         INTEL_E1000_ETHERNET_DEVICE(0x1001),
  53         INTEL_E1000_ETHERNET_DEVICE(0x1004),
  54         INTEL_E1000_ETHERNET_DEVICE(0x1008),
  55         INTEL_E1000_ETHERNET_DEVICE(0x1009),
  56         INTEL_E1000_ETHERNET_DEVICE(0x100C),
  57         INTEL_E1000_ETHERNET_DEVICE(0x100D),
  58         INTEL_E1000_ETHERNET_DEVICE(0x100E),
  59         INTEL_E1000_ETHERNET_DEVICE(0x100F),
  60         INTEL_E1000_ETHERNET_DEVICE(0x1010),
  61         INTEL_E1000_ETHERNET_DEVICE(0x1011),
  62         INTEL_E1000_ETHERNET_DEVICE(0x1012),
  63         INTEL_E1000_ETHERNET_DEVICE(0x1013),
  64         INTEL_E1000_ETHERNET_DEVICE(0x1014),
  65         INTEL_E1000_ETHERNET_DEVICE(0x1015),
  66         INTEL_E1000_ETHERNET_DEVICE(0x1016),
  67         INTEL_E1000_ETHERNET_DEVICE(0x1017),
  68         INTEL_E1000_ETHERNET_DEVICE(0x1018),
  69         INTEL_E1000_ETHERNET_DEVICE(0x1019),
  70         INTEL_E1000_ETHERNET_DEVICE(0x101A),
  71         INTEL_E1000_ETHERNET_DEVICE(0x101D),
  72         INTEL_E1000_ETHERNET_DEVICE(0x101E),
  73         INTEL_E1000_ETHERNET_DEVICE(0x1026),
  74         INTEL_E1000_ETHERNET_DEVICE(0x1027),
  75         INTEL_E1000_ETHERNET_DEVICE(0x1028),
  76         INTEL_E1000_ETHERNET_DEVICE(0x1049),
  77         INTEL_E1000_ETHERNET_DEVICE(0x104A),
  78         INTEL_E1000_ETHERNET_DEVICE(0x104B),
  79         INTEL_E1000_ETHERNET_DEVICE(0x104C),
  80         INTEL_E1000_ETHERNET_DEVICE(0x104D),
  81         INTEL_E1000_ETHERNET_DEVICE(0x105E),
  82         INTEL_E1000_ETHERNET_DEVICE(0x105F),
  83         INTEL_E1000_ETHERNET_DEVICE(0x1060),
  84         INTEL_E1000_ETHERNET_DEVICE(0x1075),
  85         INTEL_E1000_ETHERNET_DEVICE(0x1076),
  86         INTEL_E1000_ETHERNET_DEVICE(0x1077),
  87         INTEL_E1000_ETHERNET_DEVICE(0x1078),
  88         INTEL_E1000_ETHERNET_DEVICE(0x1079),
  89         INTEL_E1000_ETHERNET_DEVICE(0x107A),
  90         INTEL_E1000_ETHERNET_DEVICE(0x107B),
  91         INTEL_E1000_ETHERNET_DEVICE(0x107C),
  92         INTEL_E1000_ETHERNET_DEVICE(0x107D),
  93         INTEL_E1000_ETHERNET_DEVICE(0x107E),
  94         INTEL_E1000_ETHERNET_DEVICE(0x107F),
  95         INTEL_E1000_ETHERNET_DEVICE(0x108A),
  96         INTEL_E1000_ETHERNET_DEVICE(0x108B),
  97         INTEL_E1000_ETHERNET_DEVICE(0x108C),
  98         INTEL_E1000_ETHERNET_DEVICE(0x1096),
  99         INTEL_E1000_ETHERNET_DEVICE(0x1098),
 100         INTEL_E1000_ETHERNET_DEVICE(0x1099),
 101         INTEL_E1000_ETHERNET_DEVICE(0x109A),
 102         INTEL_E1000_ETHERNET_DEVICE(0x10A4),
 103         INTEL_E1000_ETHERNET_DEVICE(0x10B5),
 104         INTEL_E1000_ETHERNET_DEVICE(0x10B9),
 105         INTEL_E1000_ETHERNET_DEVICE(0x10BA),
 106         INTEL_E1000_ETHERNET_DEVICE(0x10BB),
 107         INTEL_E1000_ETHERNET_DEVICE(0x10BC),
 108         INTEL_E1000_ETHERNET_DEVICE(0x10C4),
 109         INTEL_E1000_ETHERNET_DEVICE(0x10C5),
 110         /* required last entry */
 111         {0,}
 112 };
 113
 114 MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
 115
 116 int e1000_up(struct e1000_adapter *adapter);
 117 void e1000_down(struct e1000_adapter *adapter);
 118 void e1000_reinit_locked(struct e1000_adapter *adapter);
 119 void e1000_reset(struct e1000_adapter *adapter);
 120 int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx);
 121 int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
 122 int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
 123 void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
 124 void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
 125 static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
 126                              struct e1000_tx_ring *txdr);
 127 static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
 128                              struct e1000_rx_ring *rxdr);
 129 static void e1000_free_tx_resources(struct e1000_adapter *adapter,
 130                              struct e1000_tx_ring *tx_ring);
 131 static void e1000_free_rx_resources(struct e1000_adapter *adapter,
 132                              struct e1000_rx_ring *rx_ring);
 133 void e1000_update_stats(struct e1000_adapter *adapter);
 134
 135 static int e1000_init_module(void);
 136 static void e1000_exit_module(void);
 137 static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
 138 static void __devexit e1000_remove(struct pci_dev *pdev);
 139 static int e1000_alloc_queues(struct e1000_adapter *adapter);
 140 static int e1000_sw_init(struct e1000_adapter *adapter);
 141 static int e1000_open(struct net_device *netdev);
 142 static int e1000_close(struct net_device *netdev);
 143 static void e1000_configure_tx(struct e1000_adapter *adapter);
 144 static void e1000_configure_rx(struct e1000_adapter *adapter);
 145 static void e1000_setup_rctl(struct e1000_adapter *adapter);
 146 static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
 147 static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
 148 static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
 149                                 struct e1000_tx_ring *tx_ring);
 150 static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
 151                                 struct e1000_rx_ring *rx_ring);
 152 static void e1000_set_multi(struct net_device *netdev);
 153 static void e1000_update_phy_info(unsigned long data);
 154 static void e1000_watchdog(unsigned long data);
 155 static void e1000_82547_tx_fifo_stall(unsigned long data);
 156 static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
 157 static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
 158 static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
 159 static int e1000_set_mac(struct net_device *netdev, void *p);
 160 static irqreturn_t e1000_intr(int irq, void *data);
 161 #ifdef CONFIG_PCI_MSI
 162 static irqreturn_t e1000_intr_msi(int irq, void *data);
 163 #endif
 164 static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter,
 165                                     struct e1000_tx_ring *tx_ring);
 166 #ifdef CONFIG_E1000_NAPI
 167 static int e1000_clean(struct net_device *poll_dev, int *budget);
 168 static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter,
 169                                     struct e1000_rx_ring *rx_ring,
 170                                     int *work_done, int work_to_do);
 171 static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 172                                        struct e1000_rx_ring *rx_ring,
 173                                        int *work_done, int work_to_do);
 174 #else
 175 static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter,
 176                                     struct e1000_rx_ring *rx_ring);
 177 static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
 178                                        struct e1000_rx_ring *rx_ring);
 179 #endif
 180 static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
 181                                    struct e1000_rx_ring *rx_ring,
 182                                    int cleaned_count);
 183 static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
 184                                       struct e1000_rx_ring *rx_ring,
 185                                       int cleaned_count);
 186 static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
 187 static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
 188                            int cmd);
 189 void e1000_set_ethtool_ops(struct net_device *netdev);
 190 static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
 191 static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
 192 static void e1000_tx_timeout(struct net_device *dev);
 193 static void e1000_reset_task(struct work_struct *work);
 194 static void e1000_smartspeed(struct e1000_adapter *adapter);
 195 static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
 196                                        struct sk_buff *skb);
 197
 198 static void e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp);
 199 static void e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
 200 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
 201 static void e1000_restore_vlan(struct e1000_adapter *adapter);
 202
 203 static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
 204 #ifdef CONFIG_PM
 205 static int e1000_resume(struct pci_dev *pdev);
 206 #endif
 207 static void e1000_shutdown(struct pci_dev *pdev);
 208
 209 #ifdef CONFIG_NET_POLL_CONTROLLER
 210 /* for netdump / net console */
 211 static void e1000_netpoll (struct net_device *netdev);
 212 #endif
 213
 214 extern void e1000_check_options(struct e1000_adapter *adapter);
 215
 216 #define COPYBREAK_DEFAULT 256
 217 static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
 218 module_param(copybreak, uint, 0644);
 219 MODULE_PARM_DESC(copybreak,
 220         "Maximum size of packet that is copied to a new buffer on receive");
 221
 222 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
 223                      pci_channel_state_t state);
 224 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
 225 static void e1000_io_resume(struct pci_dev *pdev);
 226
 227 static struct pci_error_handlers e1000_err_handler = {
 228         .error_detected = e1000_io_error_detected,
 229         .slot_reset = e1000_io_slot_reset,
 230         .resume = e1000_io_resume,
 231 };
 232
 233 static struct pci_driver e1000_driver = {
 234         .name     = e1000_driver_name,
 235         .id_table = e1000_pci_tbl,
 236         .probe    = e1000_probe,
 237         .remove   = __devexit_p(e1000_remove),
 238 #ifdef CONFIG_PM
 239         /* Power Managment Hooks */
 240         .suspend  = e1000_suspend,
 241         .resume   = e1000_resume,
 242 #endif
 243         .shutdown = e1000_shutdown,
 244         .err_handler = &e1000_err_handler
 245 };
 246
 247 MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
 248 MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
 249 MODULE_LICENSE("GPL");
 250 MODULE_VERSION(DRV_VERSION);
 251
 252 static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
 253 module_param(debug, int, 0);
 254 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 255
 256 /**
 257  * e1000_init_module - Driver Registration Routine
 258  *
 259  * e1000_init_module is the first routine called when the driver is
 260  * loaded. All it does is register with the PCI subsystem.
 261  **/
 262
 263 static int __init
 264 e1000_init_module(void)
 265 {
 266         int ret;
 267         printk(KERN_INFO "%s - version %s\n",
 268                e1000_driver_string, e1000_driver_version);
 269
 270         printk(KERN_INFO "%s\n", e1000_copyright);
 271
 272         ret = pci_register_driver(&e1000_driver);
 273         if (copybreak != COPYBREAK_DEFAULT) {
 274                 if (copybreak == 0)
 275                         printk(KERN_INFO "e1000: copybreak disabled\n");
 276                 else
 277                         printk(KERN_INFO "e1000: copybreak enabled for "
 278                                "packets <= %u bytes\n", copybreak);
 279         }
 280         return ret;
 281 }
 282
 283 module_init(e1000_init_module);
 284
 285 /**
 286  * e1000_exit_module - Driver Exit Cleanup Routine
 287  *
 288  * e1000_exit_module is called just before the driver is removed
 289  * from memory.
 290  **/
 291
 292 static void __exit
 293 e1000_exit_module(void)
 294 {
 295         pci_unregister_driver(&e1000_driver);
 296 }
 297
 298 module_exit(e1000_exit_module);
 299
 300 static int e1000_request_irq(struct e1000_adapter *adapter)
 301 {
 302         struct net_device *netdev = adapter->netdev;
 303         int flags, err = 0;
 304
 305         flags = IRQF_SHARED;
 306 #ifdef CONFIG_PCI_MSI
 307         if (adapter->hw.mac_type >= e1000_82571) {
 308                 adapter->have_msi = TRUE;
 309                 if ((err = pci_enable_msi(adapter->pdev))) {
 310                         DPRINTK(PROBE, ERR,
 311                          "Unable to allocate MSI interrupt Error: %d\n", err);
 312                         adapter->have_msi = FALSE;
 313                 }
 314         }
 315         if (adapter->have_msi) {
 316                 flags &= ~IRQF_SHARED;
 317                 err = request_irq(adapter->pdev->irq, &e1000_intr_msi, flags,
 318                                   netdev->name, netdev);
 319                 if (err)
 320                         DPRINTK(PROBE, ERR,
 321                                "Unable to allocate interrupt Error: %d\n", err);
 322         } else
 323 #endif
 324         if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags,
 325                                netdev->name, netdev)))
 326                 DPRINTK(PROBE, ERR,
 327                         "Unable to allocate interrupt Error: %d\n", err);
 328
 329         return err;
 330 }
 331
 332 static void e1000_free_irq(struct e1000_adapter *adapter)
 333 {
 334         struct net_device *netdev = adapter->netdev;
 335
 336         free_irq(adapter->pdev->irq, netdev);
 337
 338 #ifdef CONFIG_PCI_MSI
 339         if (adapter->have_msi)
 340                 pci_disable_msi(adapter->pdev);
 341 #endif
 342 }
 343
 344 /**
 345  * e1000_irq_disable - Mask off interrupt generation on the NIC
 346  * @adapter: board private structure
 347  **/
 348
 349 static void
 350 e1000_irq_disable(struct e1000_adapter *adapter)
 351 {
 352         atomic_inc(&adapter->irq_sem);
 353         E1000_WRITE_REG(&adapter->hw, IMC, ~0);
 354         E1000_WRITE_FLUSH(&adapter->hw);
 355         synchronize_irq(adapter->pdev->irq);
 356 }
 357
 358 /**
 359  * e1000_irq_enable - Enable default interrupt generation settings
 360  * @adapter: board private structure
 361  **/
 362
 363 static void
 364 e1000_irq_enable(struct e1000_adapter *adapter)
 365 {
 366         if (likely(atomic_dec_and_test(&adapter->irq_sem))) {
 367                 E1000_WRITE_REG(&adapter->hw, IMS, IMS_ENABLE_MASK);
 368                 E1000_WRITE_FLUSH(&adapter->hw);
 369         }
 370 }
 371
 372 static void
 373 e1000_update_mng_vlan(struct e1000_adapter *adapter)
 374 {
 375         struct net_device *netdev = adapter->netdev;
 376         uint16_t vid = adapter->hw.mng_cookie.vlan_id;
 377         uint16_t old_vid = adapter->mng_vlan_id;
 378         if (adapter->vlgrp) {
 379                 if (!adapter->vlgrp->vlan_devices[vid]) {
 380                         if (adapter->hw.mng_cookie.status &
 381                                 E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
 382                                 e1000_vlan_rx_add_vid(netdev, vid);
 383                                 adapter->mng_vlan_id = vid;
 384                         } else
 385                                 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
 386
 387                         if ((old_vid != (uint16_t)E1000_MNG_VLAN_NONE) &&
 388                                         (vid != old_vid) &&
 389                                         !adapter->vlgrp->vlan_devices[old_vid])
 390                                 e1000_vlan_rx_kill_vid(netdev, old_vid);
 391                 } else
 392                         adapter->mng_vlan_id = vid;
 393         }
 394 }
 395
 396 /**
 397  * e1000_release_hw_control - release control of the h/w to f/w
 398  * @adapter: address of board private structure
 399  *
 400  * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
 401  * For ASF and Pass Through versions of f/w this means that the
 402  * driver is no longer loaded. For AMT version (only with 82573) i
 403  * of the f/w this means that the network i/f is closed.
 404  *
 405  **/
 406
 407 static void
 408 e1000_release_hw_control(struct e1000_adapter *adapter)
 409 {
 410         uint32_t ctrl_ext;
 411         uint32_t swsm;
 412         uint32_t extcnf;
 413
 414         /* Let firmware taken over control of h/w */
 415         switch (adapter->hw.mac_type) {
 416         case e1000_82571:
 417         case e1000_82572:
 418         case e1000_80003es2lan:
 419                 ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
 420                 E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
 421                                 ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
 422                 break;
 423         case e1000_82573:
 424                 swsm = E1000_READ_REG(&adapter->hw, SWSM);
 425                 E1000_WRITE_REG(&adapter->hw, SWSM,
 426                                 swsm & ~E1000_SWSM_DRV_LOAD);
 427         case e1000_ich8lan:
 428                 extcnf = E1000_READ_REG(&adapter->hw, CTRL_EXT);
 429                 E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
 430                                 extcnf & ~E1000_CTRL_EXT_DRV_LOAD);
 431                 break;
 432         default:
 433                 break;
 434         }
 435 }
 436
 437 /**
 438  * e1000_get_hw_control - get control of the h/w from f/w
 439  * @adapter: address of board private structure
 440  *
 441  * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
 442  * For ASF and Pass Through versions of f/w this means that
 443  * the driver is loaded. For AMT version (only with 82573)
 444  * of the f/w this means that the network i/f is open.
 445  *
 446  **/
 447
 448 static void
 449 e1000_get_hw_control(struct e1000_adapter *adapter)
 450 {
 451         uint32_t ctrl_ext;
 452         uint32_t swsm;
 453         uint32_t extcnf;
 454
 455         /* Let firmware know the driver has taken over */
 456         switch (adapter->hw.mac_type) {
 457         case e1000_82571:
 458         case e1000_82572:
 459         case e1000_80003es2lan:
 460                 ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
 461                 E1000_WRITE_REG(&adapter->hw, CTRL_EXT,
 462                                 ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
 463                 break;
 464         case e1000_82573:
 465                 swsm = E1000_READ_REG(&adapter->hw, SWSM);
 466                 E1000_WRITE_REG(&adapter->hw, SWSM,
 467                                 swsm | E1000_SWSM_DRV_LOAD);
 468                 break;
 469         case e1000_ich8lan:
 470                 extcnf = E1000_READ_REG(&adapter->hw, EXTCNF_CTRL);
 471                 E1000_WRITE_REG(&adapter->hw, EXTCNF_CTRL,
 472                                 extcnf | E1000_EXTCNF_CTRL_SWFLAG);
 473                 break;
 474         default:
 475                 break;
 476         }
 477 }
 478
 479 static void
 480 e1000_init_manageability(struct e1000_adapter *adapter)
 481 {
 482         if (adapter->en_mng_pt) {
 483                 uint32_t manc = E1000_READ_REG(&adapter->hw, MANC);
 484
 485                 /* disable hardware interception of ARP */
 486                 manc &= ~(E1000_MANC_ARP_EN);
 487
 488                 /* enable receiving management packets to the host */
 489                 /* this will probably generate destination unreachable messages
 490                  * from the host OS, but the packets will be handled on SMBUS */
 491                 if (adapter->hw.has_manc2h) {
 492                         uint32_t manc2h = E1000_READ_REG(&adapter->hw, MANC2H);
 493
 494                         manc |= E1000_MANC_EN_MNG2HOST;
 495 #define E1000_MNG2HOST_PORT_623 (1 << 5)
 496 #define E1000_MNG2HOST_PORT_664 (1 << 6)
 497                         manc2h |= E1000_MNG2HOST_PORT_623;
 498                         manc2h |= E1000_MNG2HOST_PORT_664;
 499                         E1000_WRITE_REG(&adapter->hw, MANC2H, manc2h);
 500                 }
 501
 502                 E1000_WRITE_REG(&adapter->hw, MANC, manc);
 503         }
 504 }
 505
 506 static void
 507 e1000_release_manageability(struct e1000_adapter *adapter)
 508 {
 509         if (adapter->en_mng_pt) {
 510                 uint32_t manc = E1000_READ_REG(&adapter->hw, MANC);
 511
 512                 /* re-enable hardware interception of ARP */
 513                 manc |= E1000_MANC_ARP_EN;
 514
 515                 if (adapter->hw.has_manc2h)
 516                         manc &= ~E1000_MANC_EN_MNG2HOST;
 517
 518                 /* don't explicitly have to mess with MANC2H since
 519                  * MANC has an enable disable that gates MANC2H */
 520
 521                 E1000_WRITE_REG(&adapter->hw, MANC, manc);
 522         }
 523 }
 524
 525 int
 526 e1000_up(struct e1000_adapter *adapter)
 527 {
 528         struct net_device *netdev = adapter->netdev;
 529         int i;
 530
 531         /* hardware has been reset, we need to reload some things */
 532
 533         e1000_set_multi(netdev);
 534
 535         e1000_restore_vlan(adapter);
 536         e1000_init_manageability(adapter);
 537
 538         e1000_configure_tx(adapter);
 539         e1000_setup_rctl(adapter);
 540         e1000_configure_rx(adapter);
 541         /* call E1000_DESC_UNUSED which always leaves
 542          * at least 1 descriptor unused to make sure
 543          * next_to_use != next_to_clean */
 544         for (i = 0; i < adapter->num_rx_queues; i++) {
 545                 struct e1000_rx_ring *ring = &adapter->rx_ring[i];
 546                 adapter->alloc_rx_buf(adapter, ring,
 547                                       E1000_DESC_UNUSED(ring));
 548         }
 549
 550         adapter->tx_queue_len = netdev->tx_queue_len;
 551
 552 #ifdef CONFIG_E1000_NAPI
 553         netif_poll_enable(netdev);
 554 #endif
 555         e1000_irq_enable(adapter);
 556
 557         clear_bit(__E1000_DOWN, &adapter->flags);
 558
 559         /* fire a link change interrupt to start the watchdog */
 560         E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_LSC);
 561         return 0;
 562 }
 563
 564 /**
 565  * e1000_power_up_phy - restore link in case the phy was powered down
 566  * @adapter: address of board private structure
 567  *
 568  * The phy may be powered down to save power and turn off link when the
 569  * driver is unloaded and wake on lan is not enabled (among others)
 570  * *** this routine MUST be followed by a call to e1000_reset ***
 571  *
 572  **/
 573
 574 void e1000_power_up_phy(struct e1000_adapter *adapter)
 575 {
 576         uint16_t mii_reg = 0;
 577
 578         /* Just clear the power down bit to wake the phy back up */
 579         if (adapter->hw.media_type == e1000_media_type_copper) {
 580                 /* according to the manual, the phy will retain its
 581                  * settings across a power-down/up cycle */
 582                 e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
 583                 mii_reg &= ~MII_CR_POWER_DOWN;
 584                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
 585         }
 586 }
 587
 588 static void e1000_power_down_phy(struct e1000_adapter *adapter)
 589 {
 590         /* Power down the PHY so no link is implied when interface is down *
 591          * The PHY cannot be powered down if any of the following is TRUE *
 592          * (a) WoL is enabled
 593          * (b) AMT is active
 594          * (c) SoL/IDER session is active */
 595         if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 &&
 596            adapter->hw.media_type == e1000_media_type_copper) {
 597                 uint16_t mii_reg = 0;
 598
 599                 switch (adapter->hw.mac_type) {
 600                 case e1000_82540:
 601                 case e1000_82545:
 602                 case e1000_82545_rev_3:
 603                 case e1000_82546:
 604                 case e1000_82546_rev_3:
 605                 case e1000_82541:
 606                 case e1000_82541_rev_2:
 607                 case e1000_82547:
 608                 case e1000_82547_rev_2:
 609                         if (E1000_READ_REG(&adapter->hw, MANC) &
 610                             E1000_MANC_SMBUS_EN)
 611                                 goto out;
 612                         break;
 613                 case e1000_82571:
 614                 case e1000_82572:
 615                 case e1000_82573:
 616                 case e1000_80003es2lan:
 617                 case e1000_ich8lan:
 618                         if (e1000_check_mng_mode(&adapter->hw) ||
 619                             e1000_check_phy_reset_block(&adapter->hw))
 620                                 goto out;
 621                         break;
 622                 default:
 623                         goto out;
 624                 }
 625                 e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg);
 626                 mii_reg |= MII_CR_POWER_DOWN;
 627                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg);
 628                 mdelay(1);
 629         }
 630 out:
 631         return;
 632 }
 633
 634 void
 635 e1000_down(struct e1000_adapter *adapter)
 636 {
 637         struct net_device *netdev = adapter->netdev;
 638
 639         /* signal that we're down so the interrupt handler does not
 640          * reschedule our watchdog timer */
 641         set_bit(__E1000_DOWN, &adapter->flags);
 642
 643         e1000_irq_disable(adapter);
 644
 645         del_timer_sync(&adapter->tx_fifo_stall_timer);
 646         del_timer_sync(&adapter->watchdog_timer);
 647         del_timer_sync(&adapter->phy_info_timer);
 648
 649 #ifdef CONFIG_E1000_NAPI
 650         netif_poll_disable(netdev);
 651 #endif
 652         netdev->tx_queue_len = adapter->tx_queue_len;
 653         adapter->link_speed = 0;
 654         adapter->link_duplex = 0;
 655         netif_carrier_off(netdev);
 656         netif_stop_queue(netdev);
 657
 658         e1000_reset(adapter);
 659         e1000_clean_all_tx_rings(adapter);
 660         e1000_clean_all_rx_rings(adapter);
 661 }
 662
 663 void
 664 e1000_reinit_locked(struct e1000_adapter *adapter)
 665 {
 666         WARN_ON(in_interrupt());
 667         while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
 668                 msleep(1);
 669         e1000_down(adapter);
 670         e1000_up(adapter);
 671         clear_bit(__E1000_RESETTING, &adapter->flags);
 672 }
 673
 674 void
 675 e1000_reset(struct e1000_adapter *adapter)
 676 {
 677         uint32_t pba = 0, tx_space, min_tx_space, min_rx_space;
 678         uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF;
 679         boolean_t legacy_pba_adjust = FALSE;
 680
 681         /* Repartition Pba for greater than 9k mtu
 682          * To take effect CTRL.RST is required.
 683          */
 684
 685         switch (adapter->hw.mac_type) {
 686         case e1000_82542_rev2_0:
 687         case e1000_82542_rev2_1:
 688         case e1000_82543:
 689         case e1000_82544:
 690         case e1000_82540:
 691         case e1000_82541:
 692         case e1000_82541_rev_2:
 693                 legacy_pba_adjust = TRUE;
 694                 pba = E1000_PBA_48K;
 695                 break;
 696         case e1000_82545:
 697         case e1000_82545_rev_3:
 698         case e1000_82546:
 699         case e1000_82546_rev_3:
 700                 pba = E1000_PBA_48K;
 701                 break;
 702         case e1000_82547:
 703         case e1000_82547_rev_2:
 704                 legacy_pba_adjust = TRUE;
 705                 pba = E1000_PBA_30K;
 706                 break;
 707         case e1000_82571:
 708         case e1000_82572:
 709         case e1000_80003es2lan:
 710                 pba = E1000_PBA_38K;
 711                 break;
 712         case e1000_82573:
 713                 pba = E1000_PBA_20K;
 714                 break;
 715         case e1000_ich8lan:
 716                 pba = E1000_PBA_8K;
 717         case e1000_undefined:
 718         case e1000_num_macs:
 719                 break;
 720         }
 721
 722         if (legacy_pba_adjust == TRUE) {
 723                 if (adapter->netdev->mtu > E1000_RXBUFFER_8192)
 724                         pba -= 8; /* allocate more FIFO for Tx */
 725
 726                 if (adapter->hw.mac_type == e1000_82547) {
 727                         adapter->tx_fifo_head = 0;
 728                         adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
 729                         adapter->tx_fifo_size =
 730                                 (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
 731                         atomic_set(&adapter->tx_fifo_stall, 0);
 732                 }
 733         } else if (adapter->hw.max_frame_size > MAXIMUM_ETHERNET_FRAME_SIZE) {
 734                 /* adjust PBA for jumbo frames */
 735                 E1000_WRITE_REG(&adapter->hw, PBA, pba);
 736
 737                 /* To maintain wire speed transmits, the Tx FIFO should be
 738                  * large enough to accomodate two full transmit packets,
 739                  * rounded up to the next 1KB and expressed in KB.  Likewise,
 740                  * the Rx FIFO should be large enough to accomodate at least
 741                  * one full receive packet and is similarly rounded up and
 742                  * expressed in KB. */
 743                 pba = E1000_READ_REG(&adapter->hw, PBA);
 744                 /* upper 16 bits has Tx packet buffer allocation size in KB */
 745                 tx_space = pba >> 16;
 746                 /* lower 16 bits has Rx packet buffer allocation size in KB */
 747                 pba &= 0xffff;
 748                 /* don't include ethernet FCS because hardware appends/strips */
 749                 min_rx_space = adapter->netdev->mtu + ENET_HEADER_SIZE +
 750                                VLAN_TAG_SIZE;
 751                 min_tx_space = min_rx_space;
 752                 min_tx_space *= 2;
 753                 E1000_ROUNDUP(min_tx_space, 1024);
 754                 min_tx_space >>= 10;
 755                 E1000_ROUNDUP(min_rx_space, 1024);
 756                 min_rx_space >>= 10;
 757
 758                 /* If current Tx allocation is less than the min Tx FIFO size,
 759                  * and the min Tx FIFO size is less than the current Rx FIFO
 760                  * allocation, take space away from current Rx allocation */
 761                 if (tx_space < min_tx_space &&
 762                     ((min_tx_space - tx_space) < pba)) {
 763                         pba = pba - (min_tx_space - tx_space);
 764
 765                         /* PCI/PCIx hardware has PBA alignment constraints */
 766                         switch (adapter->hw.mac_type) {
 767                         case e1000_82545 ... e1000_82546_rev_3:
 768                                 pba &= ~(E1000_PBA_8K - 1);
 769                                 break;
 770                         default:
 771                                 break;
 772                         }
 773
 774                         /* if short on rx space, rx wins and must trump tx
 775                          * adjustment or use Early Receive if available */
 776                         if (pba < min_rx_space) {
 777                                 switch (adapter->hw.mac_type) {
 778                                 case e1000_82573:
 779                                         /* ERT enabled in e1000_configure_rx */
 780                                         break;
 781                                 default:
 782                                         pba = min_rx_space;
 783                                         break;
 784                                 }
 785                         }
 786                 }
 787         }
 788
 789         E1000_WRITE_REG(&adapter->hw, PBA, pba);
 790
 791         /* flow control settings */
 792         /* Set the FC high water mark to 90% of the FIFO size.
 793          * Required to clear last 3 LSB */
 794         fc_high_water_mark = ((pba * 9216)/10) & 0xFFF8;
 795         /* We can't use 90% on small FIFOs because the remainder
 796          * would be less than 1 full frame.  In this case, we size
 797          * it to allow at least a full frame above the high water
 798          *  mark. */
 799         if (pba < E1000_PBA_16K)
 800                 fc_high_water_mark = (pba * 1024) - 1600;
 801
 802         adapter->hw.fc_high_water = fc_high_water_mark;
 803         adapter->hw.fc_low_water = fc_high_water_mark - 8;
 804         if (adapter->hw.mac_type == e1000_80003es2lan)
 805                 adapter->hw.fc_pause_time = 0xFFFF;
 806         else
 807                 adapter->hw.fc_pause_time = E1000_FC_PAUSE_TIME;
 808         adapter->hw.fc_send_xon = 1;
 809         adapter->hw.fc = adapter->hw.original_fc;
 810
 811         /* Allow time for pending master requests to run */
 812         e1000_reset_hw(&adapter->hw);
 813         if (adapter->hw.mac_type >= e1000_82544)
 814                 E1000_WRITE_REG(&adapter->hw, WUC, 0);
 815
 816         if (e1000_init_hw(&adapter->hw))
 817                 DPRINTK(PROBE, ERR, "Hardware Error\n");
 818         e1000_update_mng_vlan(adapter);
 819
 820         /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
 821         if (adapter->hw.mac_type >= e1000_82544 &&
 822             adapter->hw.mac_type <= e1000_82547_rev_2 &&
 823             adapter->hw.autoneg == 1 &&
 824             adapter->hw.autoneg_advertised == ADVERTISE_1000_FULL) {
 825                 uint32_t ctrl = E1000_READ_REG(&adapter->hw, CTRL);
 826                 /* clear phy power management bit if we are in gig only mode,
 827                  * which if enabled will attempt negotiation to 100Mb, which
 828                  * can cause a loss of link at power off or driver unload */
 829                 ctrl &= ~E1000_CTRL_SWDPIN3;
 830                 E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
 831         }
 832
 833         /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
 834         E1000_WRITE_REG(&adapter->hw, VET, ETHERNET_IEEE_VLAN_TYPE);
 835
 836         e1000_reset_adaptive(&adapter->hw);
 837         e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
 838
 839         if (!adapter->smart_power_down &&
 840             (adapter->hw.mac_type == e1000_82571 ||
 841              adapter->hw.mac_type == e1000_82572)) {
 842                 uint16_t phy_data = 0;
 843                 /* speed up time to link by disabling smart power down, ignore
 844                  * the return value of this function because there is nothing
 845                  * different we would do if it failed */
 846                 e1000_read_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
 847                                    &phy_data);
 848                 phy_data &= ~IGP02E1000_PM_SPD;
 849                 e1000_write_phy_reg(&adapter->hw, IGP02E1000_PHY_POWER_MGMT,
 850                                     phy_data);
 851         }
 852
 853         e1000_release_manageability(adapter);
 854 }
 855
 856 /**
 857  * e1000_probe - Device Initialization Routine
 858  * @pdev: PCI device information struct
 859  * @ent: entry in e1000_pci_tbl
 860  *
 861  * Returns 0 on success, negative on failure
 862  *
 863  * e1000_probe initializes an adapter identified by a pci_dev structure.
 864  * The OS initialization, configuring of the adapter private structure,
 865  * and a hardware reset occur.
 866  **/
 867
 868 static int __devinit
 869 e1000_probe(struct pci_dev *pdev,
 870             const struct pci_device_id *ent)
 871 {
 872         struct net_device *netdev;
 873         struct e1000_adapter *adapter;
 874         unsigned long mmio_start, mmio_len;
 875         unsigned long flash_start, flash_len;
 876
 877         static int cards_found = 0;
 878         static int global_quad_port_a = 0; /* global ksp3 port a indication */
 879         int i, err, pci_using_dac;
 880         uint16_t eeprom_data = 0;
 881         uint16_t eeprom_apme_mask = E1000_EEPROM_APME;
 882         if ((err = pci_enable_device(pdev)))
 883                 return err;
 884
 885         if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK)) &&
 886             !(err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))) {
 887                 pci_using_dac = 1;
 888         } else {
 889                 if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) &&
 890                     (err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK))) {
 891                         E1000_ERR("No usable DMA configuration, aborting\n");
 892                         goto err_dma;
 893                 }
 894                 pci_using_dac = 0;
 895         }
 896
 897         if ((err = pci_request_regions(pdev, e1000_driver_name)))
 898                 goto err_pci_reg;
 899
 900         pci_set_master(pdev);
 901
 902         err = -ENOMEM;
 903         netdev = alloc_etherdev(sizeof(struct e1000_adapter));
 904         if (!netdev)
 905                 goto err_alloc_etherdev;
 906
 907         SET_MODULE_OWNER(netdev);
 908         SET_NETDEV_DEV(netdev, &pdev->dev);
 909
 910         pci_set_drvdata(pdev, netdev);
 911         adapter = netdev_priv(netdev);
 912         adapter->netdev = netdev;
 913         adapter->pdev = pdev;
 914         adapter->hw.back = adapter;
 915         adapter->msg_enable = (1 << debug) - 1;
 916
 917         mmio_start = pci_resource_start(pdev, BAR_0);
 918         mmio_len = pci_resource_len(pdev, BAR_0);
 919
 920         err = -EIO;
 921         adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
 922         if (!adapter->hw.hw_addr)
 923                 goto err_ioremap;
 924
 925         for (i = BAR_1; i <= BAR_5; i++) {
 926                 if (pci_resource_len(pdev, i) == 0)
 927                         continue;
 928                 if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
 929                         adapter->hw.io_base = pci_resource_start(pdev, i);
 930                         break;
 931                 }
 932         }
 933
 934         netdev->open = &e1000_open;
 935         netdev->stop = &e1000_close;
 936         netdev->hard_start_xmit = &e1000_xmit_frame;
 937         netdev->get_stats = &e1000_get_stats;
 938         netdev->set_multicast_list = &e1000_set_multi;
 939         netdev->set_mac_address = &e1000_set_mac;
 940         netdev->change_mtu = &e1000_change_mtu;
 941         netdev->do_ioctl = &e1000_ioctl;
 942         e1000_set_ethtool_ops(netdev);
 943         netdev->tx_timeout = &e1000_tx_timeout;
 944         netdev->watchdog_timeo = 5 * HZ;
 945 #ifdef CONFIG_E1000_NAPI
 946         netdev->poll = &e1000_clean;
 947         netdev->weight = 64;
 948 #endif
 949         netdev->vlan_rx_register = e1000_vlan_rx_register;
 950         netdev->vlan_rx_add_vid = e1000_vlan_rx_add_vid;
 951         netdev->vlan_rx_kill_vid = e1000_vlan_rx_kill_vid;
 952 #ifdef CONFIG_NET_POLL_CONTROLLER
 953         netdev->poll_controller = e1000_netpoll;
 954 #endif
 955         strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
 956
 957         netdev->mem_start = mmio_start;
 958         netdev->mem_end = mmio_start + mmio_len;
 959         netdev->base_addr = adapter->hw.io_base;
 960
 961         adapter->bd_number = cards_found;
 962
 963         /* setup the private structure */
 964
 965         if ((err = e1000_sw_init(adapter)))
 966                 goto err_sw_init;
 967
 968         err = -EIO;
 969         /* Flash BAR mapping must happen after e1000_sw_init
 970          * because it depends on mac_type */
 971         if ((adapter->hw.mac_type == e1000_ich8lan) &&
 972            (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
 973                 flash_start = pci_resource_start(pdev, 1);
 974                 flash_len = pci_resource_len(pdev, 1);
 975                 adapter->hw.flash_address = ioremap(flash_start, flash_len);
 976                 if (!adapter->hw.flash_address)
 977                         goto err_flashmap;
 978         }
 979
 980         if (e1000_check_phy_reset_block(&adapter->hw))
 981                 DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
 982
 983         if (adapter->hw.mac_type >= e1000_82543) {
 984                 netdev->features = NETIF_F_SG |
 985                                    NETIF_F_HW_CSUM |
 986                                    NETIF_F_HW_VLAN_TX |
 987                                    NETIF_F_HW_VLAN_RX |
 988                                    NETIF_F_HW_VLAN_FILTER;
 989                 if (adapter->hw.mac_type == e1000_ich8lan)
 990                         netdev->features &= ~NETIF_F_HW_VLAN_FILTER;
 991         }
 992
 993 #ifdef NETIF_F_TSO
 994         if ((adapter->hw.mac_type >= e1000_82544) &&
 995            (adapter->hw.mac_type != e1000_82547))
 996                 netdev->features |= NETIF_F_TSO;
 997
 998 #ifdef NETIF_F_TSO6
 999         if (adapter->hw.mac_type > e1000_82547_rev_2)
1000                 netdev->features |= NETIF_F_TSO6;
1001 #endif
1002 #endif
1003         if (pci_using_dac)
1004                 netdev->features |= NETIF_F_HIGHDMA;
1005
1006         netdev->features |= NETIF_F_LLTX;
1007
1008         adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw);
1009
1010         /* initialize eeprom parameters */
1011
1012         if (e1000_init_eeprom_params(&adapter->hw)) {
1013                 E1000_ERR("EEPROM initialization failed\n");
1014                 goto err_eeprom;
1015         }
1016
1017         /* before reading the EEPROM, reset the controller to
1018          * put the device in a known good starting state */
1019
1020         e1000_reset_hw(&adapter->hw);
1021
1022         /* make sure the EEPROM is good */
1023
1024         if (e1000_validate_eeprom_checksum(&adapter->hw) < 0) {
1025                 DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");
1026                 goto err_eeprom;
1027         }
1028
1029         /* copy the MAC address out of the EEPROM */
1030
1031         if (e1000_read_mac_addr(&adapter->hw))
1032                 DPRINTK(PROBE, ERR, "EEPROM Read Error\n");
1033         memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
1034         memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);
1035
1036         if (!is_valid_ether_addr(netdev->perm_addr)) {
1037                 DPRINTK(PROBE, ERR, "Invalid MAC Address\n");
1038                 goto err_eeprom;
1039         }
1040
1041         e1000_get_bus_info(&adapter->hw);
1042
1043         init_timer(&adapter->tx_fifo_stall_timer);
1044         adapter->tx_fifo_stall_timer.function = &e1000_82547_tx_fifo_stall;
1045         adapter->tx_fifo_stall_timer.data = (unsigned long) adapter;
1046
1047         init_timer(&adapter->watchdog_timer);
1048         adapter->watchdog_timer.function = &e1000_watchdog;
1049         adapter->watchdog_timer.data = (unsigned long) adapter;
1050
1051         init_timer(&adapter->phy_info_timer);
1052         adapter->phy_info_timer.function = &e1000_update_phy_info;
1053         adapter->phy_info_timer.data = (unsigned long) adapter;
1054
1055         INIT_WORK(&adapter->reset_task, e1000_reset_task);
1056
1057         e1000_check_options(adapter);
1058
1059         /* Initial Wake on LAN setting
1060          * If APM wake is enabled in the EEPROM,
1061          * enable the ACPI Magic Packet filter
1062          */
1063
1064         switch (adapter->hw.mac_type) {
1065         case e1000_82542_rev2_0:
1066         case e1000_82542_rev2_1:
1067         case e1000_82543:
1068                 break;
1069         case e1000_82544:
1070                 e1000_read_eeprom(&adapter->hw,
1071                         EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
1072                 eeprom_apme_mask = E1000_EEPROM_82544_APM;
1073                 break;
1074         case e1000_ich8lan:
1075                 e1000_read_eeprom(&adapter->hw,
1076                         EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data);
1077                 eeprom_apme_mask = E1000_EEPROM_ICH8_APME;
1078                 break;
1079         case e1000_82546:
1080         case e1000_82546_rev_3:
1081         case e1000_82571:
1082         case e1000_80003es2lan:
1083                 if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1){
1084                         e1000_read_eeprom(&adapter->hw,
1085                                 EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
1086                         break;
1087                 }
1088                 /* Fall Through */
1089         default:
1090                 e1000_read_eeprom(&adapter->hw,
1091                         EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
1092                 break;
1093         }
1094         if (eeprom_data & eeprom_apme_mask)
1095                 adapter->eeprom_wol |= E1000_WUFC_MAG;
1096
1097         /* now that we have the eeprom settings, apply the special cases
1098          * where the eeprom may be wrong or the board simply won't support
1099          * wake on lan on a particular port */
1100         switch (pdev->device) {
1101         case E1000_DEV_ID_82546GB_PCIE:
1102                 adapter->eeprom_wol = 0;
1103                 break;
1104         case E1000_DEV_ID_82546EB_FIBER:
1105         case E1000_DEV_ID_82546GB_FIBER:
1106         case E1000_DEV_ID_82571EB_FIBER:
1107                 /* Wake events only supported on port A for dual fiber
1108                  * regardless of eeprom setting */
1109                 if (E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_FUNC_1)
1110                         adapter->eeprom_wol = 0;
1111                 break;
1112         case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
1113         case E1000_DEV_ID_82571EB_QUAD_COPPER:
1114         case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
1115                 /* if quad port adapter, disable WoL on all but port A */
1116                 if (global_quad_port_a != 0)
1117                         adapter->eeprom_wol = 0;
1118                 else
1119                         adapter->quad_port_a = 1;
1120                 /* Reset for multiple quad port adapters */
1121                 if (++global_quad_port_a == 4)
1122                         global_quad_port_a = 0;
1123                 break;
1124         }
1125
1126         /* initialize the wol settings based on the eeprom settings */
1127         adapter->wol = adapter->eeprom_wol;
1128
1129         /* print bus type/speed/width info */
1130         {
1131         struct e1000_hw *hw = &adapter->hw;
1132         DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
1133                 ((hw->bus_type == e1000_bus_type_pcix) ? "-X" :
1134                  (hw->bus_type == e1000_bus_type_pci_express ? " Express":"")),
1135                 ((hw->bus_speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
1136                  (hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
1137                  (hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
1138                  (hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
1139                  (hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
1140                 ((hw->bus_width == e1000_bus_width_64) ? "64-bit" :
1141                  (hw->bus_width == e1000_bus_width_pciex_4) ? "Width x4" :
1142                  (hw->bus_width == e1000_bus_width_pciex_1) ? "Width x1" :
1143                  "32-bit"));
1144         }
1145
1146         for (i = 0; i < 6; i++)
1147                 printk("%2.2x%c", netdev->dev_addr[i], i == 5 ? '\n' : ':');
1148
1149         /* reset the hardware with the new settings */
1150         e1000_reset(adapter);
1151
1152         /* If the controller is 82573 and f/w is AMT, do not set
1153          * DRV_LOAD until the interface is up.  For all other cases,
1154          * let the f/w know that the h/w is now under the control
1155          * of the driver. */
1156         if (adapter->hw.mac_type != e1000_82573 ||
1157             !e1000_check_mng_mode(&adapter->hw))
1158                 e1000_get_hw_control(adapter);
1159
1160         strcpy(netdev->name, "eth%d");
1161         if ((err = register_netdev(netdev)))
1162                 goto err_register;
1163
1164         /* tell the stack to leave us alone until e1000_open() is called */
1165         netif_carrier_off(netdev);
1166         netif_stop_queue(netdev);
1167
1168         DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n");
1169
1170         cards_found++;
1171         return 0;
1172
1173 err_register:
1174         e1000_release_hw_control(adapter);
1175 err_eeprom:
1176         if (!e1000_check_phy_reset_block(&adapter->hw))
1177                 e1000_phy_hw_reset(&adapter->hw);
1178
1179         if (adapter->hw.flash_address)
1180                 iounmap(adapter->hw.flash_address);
1181 err_flashmap:
1182 #ifdef CONFIG_E1000_NAPI
1183         for (i = 0; i < adapter->num_rx_queues; i++)
1184                 dev_put(&adapter->polling_netdev[i]);
1185 #endif
1186
1187         kfree(adapter->tx_ring);
1188         kfree(adapter->rx_ring);
1189 #ifdef CONFIG_E1000_NAPI
1190         kfree(adapter->polling_netdev);
1191 #endif
1192 err_sw_init:
1193         iounmap(adapter->hw.hw_addr);
1194 err_ioremap:
1195         free_netdev(netdev);
1196 err_alloc_etherdev:
1197         pci_release_regions(pdev);
1198 err_pci_reg:
1199 err_dma:
1200         pci_disable_device(pdev);
1201         return err;
1202 }
1203
1204 /**
1205  * e1000_remove - Device Removal Routine
1206  * @pdev: PCI device information struct
1207  *
1208  * e1000_remove is called by the PCI subsystem to alert the driver
1209  * that it should release a PCI device.  The could be caused by a
1210  * Hot-Plug event, or because the driver is going to be removed from
1211  * memory.
1212  **/
1213
1214 static void __devexit
1215 e1000_remove(struct pci_dev *pdev)
1216 {
1217         struct net_device *netdev = pci_get_drvdata(pdev);
1218         struct e1000_adapter *adapter = netdev_priv(netdev);
1219 #ifdef CONFIG_E1000_NAPI
1220         int i;
1221 #endif
1222
1223         flush_scheduled_work();
1224
1225         e1000_release_manageability(adapter);
1226
1227         /* Release control of h/w to f/w.  If f/w is AMT enabled, this
1228          * would have already happened in close and is redundant. */
1229         e1000_release_hw_control(adapter);
1230
1231         unregister_netdev(netdev);
1232 #ifdef CONFIG_E1000_NAPI
1233         for (i = 0; i < adapter->num_rx_queues; i++)
1234                 dev_put(&adapter->polling_netdev[i]);
1235 #endif
1236
1237         if (!e1000_check_phy_reset_block(&adapter->hw))
1238                 e1000_phy_hw_reset(&adapter->hw);
1239
1240         kfree(adapter->tx_ring);
1241         kfree(adapter->rx_ring);
1242 #ifdef CONFIG_E1000_NAPI
1243         kfree(adapter->polling_netdev);
1244 #endif
1245
1246         iounmap(adapter->hw.hw_addr);
1247         if (adapter->hw.flash_address)
1248                 iounmap(adapter->hw.flash_address);
1249         pci_release_regions(pdev);
1250
1251         free_netdev(netdev);
1252
1253         pci_disable_device(pdev);
1254 }
1255
1256 /**
1257  * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
1258  * @adapter: board private structure to initialize
1259  *
1260  * e1000_sw_init initializes the Adapter private data structure.
1261  * Fields are initialized based on PCI device information and
1262  * OS network device settings (MTU size).
1263  **/
1264
1265 static int __devinit
1266 e1000_sw_init(struct e1000_adapter *adapter)
1267 {
1268         struct e1000_hw *hw = &adapter->hw;
1269         struct net_device *netdev = adapter->netdev;
1270         struct pci_dev *pdev = adapter->pdev;
1271 #ifdef CONFIG_E1000_NAPI
1272         int i;
1273 #endif
1274
1275         /* PCI config space info */
1276
1277         hw->vendor_id = pdev->vendor;
1278         hw->device_id = pdev->device;
1279         hw->subsystem_vendor_id = pdev->subsystem_vendor;
1280         hw->subsystem_id = pdev->subsystem_device;
1281
1282         pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
1283
1284         pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
1285
1286         adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
1287         adapter->rx_ps_bsize0 = E1000_RXBUFFER_128;
1288         hw->max_frame_size = netdev->mtu +
1289                              ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
1290         hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
1291
1292         /* identify the MAC */
1293
1294         if (e1000_set_mac_type(hw)) {
1295                 DPRINTK(PROBE, ERR, "Unknown MAC Type\n");
1296                 return -EIO;
1297         }
1298
1299         switch (hw->mac_type) {
1300         default:
1301                 break;
1302         case e1000_82541:
1303         case e1000_82547:
1304         case e1000_82541_rev_2:
1305         case e1000_82547_rev_2:
1306                 hw->phy_init_script = 1;
1307                 break;
1308         }
1309
1310         e1000_set_media_type(hw);
1311
1312         hw->wait_autoneg_complete = FALSE;
1313         hw->tbi_compatibility_en = TRUE;
1314         hw->adaptive_ifs = TRUE;
1315
1316         /* Copper options */
1317
1318         if (hw->media_type == e1000_media_type_copper) {
1319                 hw->mdix = AUTO_ALL_MODES;
1320                 hw->disable_polarity_correction = FALSE;
1321                 hw->master_slave = E1000_MASTER_SLAVE;
1322         }
1323
1324         adapter->num_tx_queues = 1;
1325         adapter->num_rx_queues = 1;
1326
1327         if (e1000_alloc_queues(adapter)) {
1328                 DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
1329                 return -ENOMEM;
1330         }
1331
1332 #ifdef CONFIG_E1000_NAPI
1333         for (i = 0; i < adapter->num_rx_queues; i++) {
1334                 adapter->polling_netdev[i].priv = adapter;
1335                 adapter->polling_netdev[i].poll = &e1000_clean;
1336                 adapter->polling_netdev[i].weight = 64;
1337                 dev_hold(&adapter->polling_netdev[i]);
1338                 set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
1339         }
1340         spin_lock_init(&adapter->tx_queue_lock);
1341 #endif
1342
1343         atomic_set(&adapter->irq_sem, 1);
1344         spin_lock_init(&adapter->stats_lock);
1345
1346         set_bit(__E1000_DOWN, &adapter->flags);
1347
1348         return 0;
1349 }
1350
1351 /**
1352  * e1000_alloc_queues - Allocate memory for all rings
1353  * @adapter: board private structure to initialize
1354  *
1355  * We allocate one ring per queue at run-time since we don't know the
1356  * number of queues at compile-time.  The polling_netdev array is
1357  * intended for Multiqueue, but should work fine with a single queue.
1358  **/
1359
1360 static int __devinit
1361 e1000_alloc_queues(struct e1000_adapter *adapter)
1362 {
1363         int size;
1364
1365         size = sizeof(struct e1000_tx_ring) * adapter->num_tx_queues;
1366         adapter->tx_ring = kmalloc(size, GFP_KERNEL);
1367         if (!adapter->tx_ring)
1368                 return -ENOMEM;
1369         memset(adapter->tx_ring, 0, size);
1370
1371         size = sizeof(struct e1000_rx_ring) * adapter->num_rx_queues;
1372         adapter->rx_ring = kmalloc(size, GFP_KERNEL);
1373         if (!adapter->rx_ring) {
1374                 kfree(adapter->tx_ring);
1375                 return -ENOMEM;
1376         }
1377         memset(adapter->rx_ring, 0, size);
1378
1379 #ifdef CONFIG_E1000_NAPI
1380         size = sizeof(struct net_device) * adapter->num_rx_queues;
1381         adapter->polling_netdev = kmalloc(size, GFP_KERNEL);
1382         if (!adapter->polling_netdev) {
1383                 kfree(adapter->tx_ring);
1384                 kfree(adapter->rx_ring);
1385                 return -ENOMEM;
1386         }
1387         memset(adapter->polling_netdev, 0, size);
1388 #endif
1389
1390         return E1000_SUCCESS;
1391 }
1392
1393 /**
1394  * e1000_open - Called when a network interface is made active
1395  * @netdev: network interface device structure
1396  *
1397  * Returns 0 on success, negative value on failure
1398  *
1399  * The open entry point is called when a network interface is made
1400  * active by the system (IFF_UP).  At this point all resources needed
1401  * for transmit and receive operations are allocated, the interrupt
1402  * handler is registered with the OS, the watchdog timer is started,
1403  * and the stack is notified that the interface is ready.
1404  **/
1405
1406 static int
1407 e1000_open(struct net_device *netdev)
1408 {
1409         struct e1000_adapter *adapter = netdev_priv(netdev);
1410         int err;
1411
1412         /* disallow open during test */
1413         if (test_bit(__E1000_TESTING, &adapter->flags))
1414                 return -EBUSY;
1415
1416         /* allocate transmit descriptors */
1417         if ((err = e1000_setup_all_tx_resources(adapter)))
1418                 goto err_setup_tx;
1419
1420         /* allocate receive descriptors */
1421         if ((err = e1000_setup_all_rx_resources(adapter)))
1422                 goto err_setup_rx;
1423
1424         err = e1000_request_irq(adapter);
1425         if (err)
1426                 goto err_req_irq;
1427
1428         e1000_power_up_phy(adapter);
1429
1430         if ((err = e1000_up(adapter)))
1431                 goto err_up;
1432         adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
1433         if ((adapter->hw.mng_cookie.status &
1434                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
1435                 e1000_update_mng_vlan(adapter);
1436         }
1437
1438         /* If AMT is enabled, let the firmware know that the network
1439          * interface is now open */
1440         if (adapter->hw.mac_type == e1000_82573 &&
1441             e1000_check_mng_mode(&adapter->hw))
1442                 e1000_get_hw_control(adapter);
1443
1444         return E1000_SUCCESS;
1445
1446 err_up:
1447         e1000_power_down_phy(adapter);
1448         e1000_free_irq(adapter);
1449 err_req_irq:
1450         e1000_free_all_rx_resources(adapter);
1451 err_setup_rx:
1452         e1000_free_all_tx_resources(adapter);
1453 err_setup_tx:
1454         e1000_reset(adapter);
1455
1456         return err;
1457 }
1458
1459 /**
1460  * e1000_close - Disables a network interface
1461  * @netdev: network interface device structure
1462  *
1463  * Returns 0, this is not allowed to fail
1464  *
1465  * The close entry point is called when an interface is de-activated
1466  * by the OS.  The hardware is still under the drivers control, but
1467  * needs to be disabled.  A global MAC reset is issued to stop the
1468  * hardware, and all transmit and receive resources are freed.
1469  **/
1470
1471 static int
1472 e1000_close(struct net_device *netdev)
1473 {
1474         struct e1000_adapter *adapter = netdev_priv(netdev);
1475
1476         WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
1477         e1000_down(adapter);
1478         e1000_power_down_phy(adapter);
1479         e1000_free_irq(adapter);
1480
1481         e1000_free_all_tx_resources(adapter);
1482         e1000_free_all_rx_resources(adapter);
1483
1484         /* kill manageability vlan ID if supported, but not if a vlan with
1485          * the same ID is registered on the host OS (let 8021q kill it) */
1486         if ((adapter->hw.mng_cookie.status &
1487                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
1488              !(adapter->vlgrp &&
1489                           adapter->vlgrp->vlan_devices[adapter->mng_vlan_id])) {
1490                 e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
1491         }
1492
1493         /* If AMT is enabled, let the firmware know that the network
1494          * interface is now closed */
1495         if (adapter->hw.mac_type == e1000_82573 &&
1496             e1000_check_mng_mode(&adapter->hw))
1497                 e1000_release_hw_control(adapter);
1498
1499         return 0;
1500 }
1501
1502 /**
1503  * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
1504  * @adapter: address of board private structure
1505  * @start: address of beginning of memory
1506  * @len: length of memory
1507  **/
1508 static boolean_t
1509 e1000_check_64k_bound(struct e1000_adapter *adapter,
1510                       void *start, unsigned long len)
1511 {
1512         unsigned long begin = (unsigned long) start;
1513         unsigned long end = begin + len;
1514
1515         /* First rev 82545 and 82546 need to not allow any memory
1516          * write location to cross 64k boundary due to errata 23 */
1517         if (adapter->hw.mac_type == e1000_82545 ||
1518             adapter->hw.mac_type == e1000_82546) {
1519                 return ((begin ^ (end - 1)) >> 16) != 0 ? FALSE : TRUE;
1520         }
1521
1522         return TRUE;
1523 }
1524
1525 /**
1526  * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
1527  * @adapter: board private structure
1528  * @txdr:    tx descriptor ring (for a specific queue) to setup
1529  *
1530  * Return 0 on success, negative on failure
1531  **/
1532
1533 static int
1534 e1000_setup_tx_resources(struct e1000_adapter *adapter,
1535                          struct e1000_tx_ring *txdr)
1536 {
1537         struct pci_dev *pdev = adapter->pdev;
1538         int size;
1539
1540         size = sizeof(struct e1000_buffer) * txdr->count;
1541         txdr->buffer_info = vmalloc(size);
1542         if (!txdr->buffer_info) {
1543                 DPRINTK(PROBE, ERR,
1544                 "Unable to allocate memory for the transmit descriptor ring\n");
1545                 return -ENOMEM;
1546         }
1547         memset(txdr->buffer_info, 0, size);
1548
1549         /* round up to nearest 4K */
1550
1551         txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
1552         E1000_ROUNDUP(txdr->size, 4096);
1553
1554         txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
1555         if (!txdr->desc) {
1556 setup_tx_desc_die:
1557                 vfree(txdr->buffer_info);
1558                 DPRINTK(PROBE, ERR,
1559                 "Unable to allocate memory for the transmit descriptor ring\n");
1560                 return -ENOMEM;
1561         }
1562
1563         /* Fix for errata 23, can't cross 64kB boundary */
1564         if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
1565                 void *olddesc = txdr->desc;
1566                 dma_addr_t olddma = txdr->dma;
1567                 DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes "
1568                                      "at %p\n", txdr->size, txdr->desc);
1569                 /* Try again, without freeing the previous */
1570                 txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma);
1571                 /* Failed allocation, critical failure */
1572                 if (!txdr->desc) {
1573                         pci_free_consistent(pdev, txdr->size, olddesc, olddma);
1574                         goto setup_tx_desc_die;
1575                 }
1576
1577                 if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
1578                         /* give up */
1579                         pci_free_consistent(pdev, txdr->size, txdr->desc,
1580                                             txdr->dma);
1581                         pci_free_consistent(pdev, txdr->size, olddesc, olddma);
1582                         DPRINTK(PROBE, ERR,
1583                                 "Unable to allocate aligned memory "
1584                                 "for the transmit descriptor ring\n");
1585                         vfree(txdr->buffer_info);
1586                         return -ENOMEM;
1587                 } else {
1588                         /* Free old allocation, new allocation was successful */
1589                         pci_free_consistent(pdev, txdr->size, olddesc, olddma);
1590                 }
1591         }
1592         memset(txdr->desc, 0, txdr->size);
1593
1594         txdr->next_to_use = 0;
1595         txdr->next_to_clean = 0;
1596         spin_lock_init(&txdr->tx_lock);
1597
1598         return 0;
1599 }
1600
1601 /**
1602  * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
1603  *                                (Descriptors) for all queues
1604  * @adapter: board private structure
1605  *
1606  * Return 0 on success, negative on failure
1607  **/
1608
1609 int
1610 e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
1611 {
1612         int i, err = 0;
1613
1614         for (i = 0; i < adapter->num_tx_queues; i++) {
1615                 err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
1616                 if (err) {
1617                         DPRINTK(PROBE, ERR,
1618                                 "Allocation for Tx Queue %u failed\n", i);
1619                         for (i-- ; i >= 0; i--)
1620                                 e1000_free_tx_resources(adapter,
1621                                                         &adapter->tx_ring[i]);
1622                         break;
1623                 }
1624         }
1625
1626         return err;
1627 }
1628
1629 /**
1630  * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
1631  * @adapter: board private structure
1632  *
1633  * Configure the Tx unit of the MAC after a reset.
1634  **/
1635
1636 static void
1637 e1000_configure_tx(struct e1000_adapter *adapter)
1638 {
1639         uint64_t tdba;
1640         struct e1000_hw *hw = &adapter->hw;
1641         uint32_t tdlen, tctl, tipg, tarc;
1642         uint32_t ipgr1, ipgr2;
1643
1644         /* Setup the HW Tx Head and Tail descriptor pointers */
1645
1646         switch (adapter->num_tx_queues) {
1647         case 1:
1648         default:
1649                 tdba = adapter->tx_ring[0].dma;
1650                 tdlen = adapter->tx_ring[0].count *
1651                         sizeof(struct e1000_tx_desc);
1652                 E1000_WRITE_REG(hw, TDLEN, tdlen);
1653                 E1000_WRITE_REG(hw, TDBAH, (tdba >> 32));
1654                 E1000_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
1655                 E1000_WRITE_REG(hw, TDT, 0);
1656                 E1000_WRITE_REG(hw, TDH, 0);
1657                 adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH);
1658                 adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT);
1659                 break;
1660         }
1661
1662         /* Set the default values for the Tx Inter Packet Gap timer */
1663         if (adapter->hw.mac_type <= e1000_82547_rev_2 &&
1664             (hw->media_type == e1000_media_type_fiber ||
1665              hw->media_type == e1000_media_type_internal_serdes))
1666                 tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
1667         else
1668                 tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
1669
1670         switch (hw->mac_type) {
1671         case e1000_82542_rev2_0:
1672         case e1000_82542_rev2_1:
1673                 tipg = DEFAULT_82542_TIPG_IPGT;
1674                 ipgr1 = DEFAULT_82542_TIPG_IPGR1;
1675                 ipgr2 = DEFAULT_82542_TIPG_IPGR2;
1676                 break;
1677         case e1000_80003es2lan:
1678                 ipgr1 = DEFAULT_82543_TIPG_IPGR1;
1679                 ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2;
1680                 break;
1681         default:
1682                 ipgr1 = DEFAULT_82543_TIPG_IPGR1;
1683                 ipgr2 = DEFAULT_82543_TIPG_IPGR2;
1684                 break;
1685         }
1686         tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
1687         tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
1688         E1000_WRITE_REG(hw, TIPG, tipg);
1689
1690         /* Set the Tx Interrupt Delay register */
1691
1692         E1000_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
1693         if (hw->mac_type >= e1000_82540)
1694                 E1000_WRITE_REG(hw, TADV, adapter->tx_abs_int_delay);
1695
1696         /* Program the Transmit Control Register */
1697
1698         tctl = E1000_READ_REG(hw, TCTL);
1699         tctl &= ~E1000_TCTL_CT;
1700         tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
1701                 (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
1702
1703         if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) {
1704                 tarc = E1000_READ_REG(hw, TARC0);
1705                 /* set the speed mode bit, we'll clear it if we're not at
1706                  * gigabit link later */
1707                 tarc |= (1 << 21);
1708                 E1000_WRITE_REG(hw, TARC0, tarc);
1709         } else if (hw->mac_type == e1000_80003es2lan) {
1710                 tarc = E1000_READ_REG(hw, TARC0);
1711                 tarc |= 1;
1712                 E1000_WRITE_REG(hw, TARC0, tarc);
1713                 tarc = E1000_READ_REG(hw, TARC1);
1714                 tarc |= 1;
1715                 E1000_WRITE_REG(hw, TARC1, tarc);
1716         }
1717
1718         e1000_config_collision_dist(hw);
1719
1720         /* Setup Transmit Descriptor Settings for eop descriptor */
1721         adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
1722
1723         /* only set IDE if we are delaying interrupts using the timers */
1724         if (adapter->tx_int_delay)
1725                 adapter->txd_cmd |= E1000_TXD_CMD_IDE;
1726
1727         if (hw->mac_type < e1000_82543)
1728                 adapter->txd_cmd |= E1000_TXD_CMD_RPS;
1729         else
1730                 adapter->txd_cmd |= E1000_TXD_CMD_RS;
1731
1732         /* Cache if we're 82544 running in PCI-X because we'll
1733          * need this to apply a workaround later in the send path. */
1734         if (hw->mac_type == e1000_82544 &&
1735             hw->bus_type == e1000_bus_type_pcix)
1736                 adapter->pcix_82544 = 1;
1737
1738         E1000_WRITE_REG(hw, TCTL, tctl);
1739
1740 }
1741
1742 /**
1743  * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
1744  * @adapter: board private structure
1745  * @rxdr:    rx descriptor ring (for a specific queue) to setup
1746  *
1747  * Returns 0 on success, negative on failure
1748  **/
1749
1750 static int
1751 e1000_setup_rx_resources(struct e1000_adapter *adapter,
1752                          struct e1000_rx_ring *rxdr)
1753 {
1754         struct pci_dev *pdev = adapter->pdev;
1755         int size, desc_len;
1756
1757         size = sizeof(struct e1000_buffer) * rxdr->count;
1758         rxdr->buffer_info = vmalloc(size);
1759         if (!rxdr->buffer_info) {
1760                 DPRINTK(PROBE, ERR,
1761                 "Unable to allocate memory for the receive descriptor ring\n");
1762                 return -ENOMEM;
1763         }
1764         memset(rxdr->buffer_info, 0, size);
1765
1766         size = sizeof(struct e1000_ps_page) * rxdr->count;
1767         rxdr->ps_page = kmalloc(size, GFP_KERNEL);
1768         if (!rxdr->ps_page) {
1769                 vfree(rxdr->buffer_info);
1770                 DPRINTK(PROBE, ERR,
1771                 "Unable to allocate memory for the receive descriptor ring\n");
1772                 return -ENOMEM;
1773         }
1774         memset(rxdr->ps_page, 0, size);
1775
1776         size = sizeof(struct e1000_ps_page_dma) * rxdr->count;
1777         rxdr->ps_page_dma = kmalloc(size, GFP_KERNEL);
1778         if (!rxdr->ps_page_dma) {
1779                 vfree(rxdr->buffer_info);
1780                 kfree(rxdr->ps_page);
1781                 DPRINTK(PROBE, ERR,
1782                 "Unable to allocate memory for the receive descriptor ring\n");
1783                 return -ENOMEM;
1784         }
1785         memset(rxdr->ps_page_dma, 0, size);
1786
1787         if (adapter->hw.mac_type <= e1000_82547_rev_2)
1788                 desc_len = sizeof(struct e1000_rx_desc);
1789         else
1790                 desc_len = sizeof(union e1000_rx_desc_packet_split);
1791
1792         /* Round up to nearest 4K */
1793
1794         rxdr->size = rxdr->count * desc_len;
1795         E1000_ROUNDUP(rxdr->size, 4096);
1796
1797         rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
1798
1799         if (!rxdr->desc) {
1800                 DPRINTK(PROBE, ERR,
1801                 "Unable to allocate memory for the receive descriptor ring\n");
1802 setup_rx_desc_die:
1803                 vfree(rxdr->buffer_info);
1804                 kfree(rxdr->ps_page);
1805                 kfree(rxdr->ps_page_dma);
1806                 return -ENOMEM;
1807         }
1808
1809         /* Fix for errata 23, can't cross 64kB boundary */
1810         if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
1811                 void *olddesc = rxdr->desc;
1812                 dma_addr_t olddma = rxdr->dma;
1813                 DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes "
1814                                      "at %p\n", rxdr->size, rxdr->desc);
1815                 /* Try again, without freeing the previous */
1816                 rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma);
1817                 /* Failed allocation, critical failure */
1818                 if (!rxdr->desc) {
1819                         pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
1820                         DPRINTK(PROBE, ERR,
1821                                 "Unable to allocate memory "
1822                                 "for the receive descriptor ring\n");
1823                         goto setup_rx_desc_die;
1824                 }
1825
1826                 if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
1827                         /* give up */
1828                         pci_free_consistent(pdev, rxdr->size, rxdr->desc,
1829                                             rxdr->dma);
1830                         pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
1831                         DPRINTK(PROBE, ERR,
1832                                 "Unable to allocate aligned memory "
1833                                 "for the receive descriptor ring\n");
1834                         goto setup_rx_desc_die;
1835                 } else {
1836                         /* Free old allocation, new allocation was successful */
1837                         pci_free_consistent(pdev, rxdr->size, olddesc, olddma);
1838                 }
1839         }
1840         memset(rxdr->desc, 0, rxdr->size);
1841
1842         rxdr->next_to_clean = 0;
1843         rxdr->next_to_use = 0;
1844
1845         return 0;
1846 }
1847
1848 /**
1849  * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
1850  *                                (Descriptors) for all queues
1851  * @adapter: board private structure
1852  *
1853  * Return 0 on success, negative on failure
1854  **/
1855
1856 int
1857 e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
1858 {
1859         int i, err = 0;
1860
1861         for (i = 0; i < adapter->num_rx_queues; i++) {
1862                 err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
1863                 if (err) {
1864                         DPRINTK(PROBE, ERR,
1865                                 "Allocation for Rx Queue %u failed\n", i);
1866                         for (i-- ; i >= 0; i--)
1867                                 e1000_free_rx_resources(adapter,
1868                                                         &adapter->rx_ring[i]);
1869                         break;
1870                 }
1871         }
1872
1873         return err;
1874 }
1875
1876 /**
1877  * e1000_setup_rctl - configure the receive control registers
1878  * @adapter: Board private structure
1879  **/
1880 #define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
1881                         (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
1882 static void
1883 e1000_setup_rctl(struct e1000_adapter *adapter)
1884 {
1885         uint32_t rctl, rfctl;
1886         uint32_t psrctl = 0;
1887 #ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
1888         uint32_t pages = 0;
1889 #endif
1890
1891         rctl = E1000_READ_REG(&adapter->hw, RCTL);
1892
1893         rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
1894
1895         rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
1896                 E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
1897                 (adapter->hw.mc_filter_type << E1000_RCTL_MO_SHIFT);
1898
1899         if (adapter->hw.tbi_compatibility_on == 1)
1900                 rctl |= E1000_RCTL_SBP;
1901         else
1902                 rctl &= ~E1000_RCTL_SBP;
1903
1904         if (adapter->netdev->mtu <= ETH_DATA_LEN)
1905                 rctl &= ~E1000_RCTL_LPE;
1906         else
1907                 rctl |= E1000_RCTL_LPE;
1908
1909         /* Setup buffer sizes */
1910         rctl &= ~E1000_RCTL_SZ_4096;
1911         rctl |= E1000_RCTL_BSEX;
1912         switch (adapter->rx_buffer_len) {
1913                 case E1000_RXBUFFER_256:
1914                         rctl |= E1000_RCTL_SZ_256;
1915                         rctl &= ~E1000_RCTL_BSEX;
1916                         break;
1917                 case E1000_RXBUFFER_512:
1918                         rctl |= E1000_RCTL_SZ_512;
1919                         rctl &= ~E1000_RCTL_BSEX;
1920                         break;
1921                 case E1000_RXBUFFER_1024:
1922                         rctl |= E1000_RCTL_SZ_1024;
1923                         rctl &= ~E1000_RCTL_BSEX;
1924                         break;
1925                 case E1000_RXBUFFER_2048:
1926                 default:
1927                         rctl |= E1000_RCTL_SZ_2048;
1928                         rctl &= ~E1000_RCTL_BSEX;
1929                         break;
1930                 case E1000_RXBUFFER_4096:
1931                         rctl |= E1000_RCTL_SZ_4096;
1932                         break;
1933                 case E1000_RXBUFFER_8192:
1934                         rctl |= E1000_RCTL_SZ_8192;
1935                         break;
1936                 case E1000_RXBUFFER_16384:
1937                         rctl |= E1000_RCTL_SZ_16384;
1938                         break;
1939         }
1940
1941 #ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
1942         /* 82571 and greater support packet-split where the protocol
1943          * header is placed in skb->data and the packet data is
1944          * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
1945          * In the case of a non-split, skb->data is linearly filled,
1946          * followed by the page buffers.  Therefore, skb->data is
1947          * sized to hold the largest protocol header.
1948          */
1949         /* allocations using alloc_page take too long for regular MTU
1950          * so only enable packet split for jumbo frames */
1951         pages = PAGE_USE_COUNT(adapter->netdev->mtu);
1952         if ((adapter->hw.mac_type >= e1000_82571) && (pages <= 3) &&
1953             PAGE_SIZE <= 16384 && (rctl & E1000_RCTL_LPE))
1954                 adapter->rx_ps_pages = pages;
1955         else
1956                 adapter->rx_ps_pages = 0;
1957 #endif
1958         if (adapter->rx_ps_pages) {
1959                 /* Configure extra packet-split registers */
1960                 rfctl = E1000_READ_REG(&adapter->hw, RFCTL);
1961                 rfctl |= E1000_RFCTL_EXTEN;
1962                 /* disable packet split support for IPv6 extension headers,
1963                  * because some malformed IPv6 headers can hang the RX */
1964                 rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
1965                           E1000_RFCTL_NEW_IPV6_EXT_DIS);
1966
1967                 E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl);
1968
1969                 rctl |= E1000_RCTL_DTYP_PS;
1970
1971                 psrctl |= adapter->rx_ps_bsize0 >>
1972                         E1000_PSRCTL_BSIZE0_SHIFT;
1973
1974                 switch (adapter->rx_ps_pages) {
1975                 case 3:
1976                         psrctl |= PAGE_SIZE <<
1977                                 E1000_PSRCTL_BSIZE3_SHIFT;
1978                 case 2:
1979                         psrctl |= PAGE_SIZE <<
1980                                 E1000_PSRCTL_BSIZE2_SHIFT;
1981                 case 1:
1982                         psrctl |= PAGE_SIZE >>
1983                                 E1000_PSRCTL_BSIZE1_SHIFT;
1984                         break;
1985                 }
1986
1987                 E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl);
1988         }
1989
1990         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
1991 }
1992
1993 /**
1994  * e1000_configure_rx - Configure 8254x Receive Unit after Reset
1995  * @adapter: board private structure
1996  *
1997  * Configure the Rx unit of the MAC after a reset.
1998  **/
1999
2000 static void
2001 e1000_configure_rx(struct e1000_adapter *adapter)
2002 {
2003         uint64_t rdba;
2004         struct e1000_hw *hw = &adapter->hw;
2005         uint32_t rdlen, rctl, rxcsum, ctrl_ext;
2006
2007         if (adapter->rx_ps_pages) {
2008                 /* this is a 32 byte descriptor */
2009                 rdlen = adapter->rx_ring[0].count *
2010                         sizeof(union e1000_rx_desc_packet_split);
2011                 adapter->clean_rx = e1000_clean_rx_irq_ps;
2012                 adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
2013         } else {
2014                 rdlen = adapter->rx_ring[0].count *
2015                         sizeof(struct e1000_rx_desc);
2016                 adapter->clean_rx = e1000_clean_rx_irq;
2017                 adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
2018         }
2019
2020         /* disable receives while setting up the descriptors */
2021         rctl = E1000_READ_REG(hw, RCTL);
2022         E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
2023
2024         /* set the Receive Delay Timer Register */
2025         E1000_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
2026
2027         if (hw->mac_type >= e1000_82540) {
2028                 E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay);
2029                 if (adapter->itr_setting != 0)
2030                         E1000_WRITE_REG(hw, ITR,
2031                                 1000000000 / (adapter->itr * 256));
2032         }
2033
2034         if (hw->mac_type >= e1000_82571) {
2035                 ctrl_ext = E1000_READ_REG(hw, CTRL_EXT);
2036                 /* Reset delay timers after every interrupt */
2037                 ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
2038 #ifdef CONFIG_E1000_NAPI
2039                 /* Auto-Mask interrupts upon ICR access */
2040                 ctrl_ext |= E1000_CTRL_EXT_IAME;
2041                 E1000_WRITE_REG(hw, IAM, 0xffffffff);
2042 #endif
2043                 E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext);
2044                 E1000_WRITE_FLUSH(hw);
2045         }
2046
2047         /* Setup the HW Rx Head and Tail Descriptor Pointers and
2048          * the Base and Length of the Rx Descriptor Ring */
2049         switch (adapter->num_rx_queues) {
2050         case 1:
2051         default:
2052                 rdba = adapter->rx_ring[0].dma;
2053                 E1000_WRITE_REG(hw, RDLEN, rdlen);
2054                 E1000_WRITE_REG(hw, RDBAH, (rdba >> 32));
2055                 E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
2056                 E1000_WRITE_REG(hw, RDT, 0);
2057                 E1000_WRITE_REG(hw, RDH, 0);
2058                 adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH);
2059                 adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT);
2060                 break;
2061         }
2062
2063         /* Enable 82543 Receive Checksum Offload for TCP and UDP */
2064         if (hw->mac_type >= e1000_82543) {
2065                 rxcsum = E1000_READ_REG(hw, RXCSUM);
2066                 if (adapter->rx_csum == TRUE) {
2067                         rxcsum |= E1000_RXCSUM_TUOFL;
2068
2069                         /* Enable 82571 IPv4 payload checksum for UDP fragments
2070                          * Must be used in conjunction with packet-split. */
2071                         if ((hw->mac_type >= e1000_82571) &&
2072                             (adapter->rx_ps_pages)) {
2073                                 rxcsum |= E1000_RXCSUM_IPPCSE;
2074                         }
2075                 } else {
2076                         rxcsum &= ~E1000_RXCSUM_TUOFL;
2077                         /* don't need to clear IPPCSE as it defaults to 0 */
2078                 }
2079                 E1000_WRITE_REG(hw, RXCSUM, rxcsum);
2080         }
2081
2082         /* enable early receives on 82573, only takes effect if using > 2048
2083          * byte total frame size.  for example only for jumbo frames */
2084 #define E1000_ERT_2048 0x100
2085         if (hw->mac_type == e1000_82573)
2086                 E1000_WRITE_REG(hw, ERT, E1000_ERT_2048);
2087
2088         /* Enable Receives */
2089         E1000_WRITE_REG(hw, RCTL, rctl);
2090 }
2091
2092 /**
2093  * e1000_free_tx_resources - Free Tx Resources per Queue
2094  * @adapter: board private structure
2095  * @tx_ring: Tx descriptor ring for a specific queue
2096  *
2097  * Free all transmit software resources
2098  **/
2099
2100 static void
2101 e1000_free_tx_resources(struct e1000_adapter *adapter,
2102                         struct e1000_tx_ring *tx_ring)
2103 {
2104         struct pci_dev *pdev = adapter->pdev;
2105
2106         e1000_clean_tx_ring(adapter, tx_ring);
2107
2108         vfree(tx_ring->buffer_info);
2109         tx_ring->buffer_info = NULL;
2110
2111         pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
2112
2113         tx_ring->desc = NULL;
2114 }
2115
2116 /**
2117  * e1000_free_all_tx_resources - Free Tx Resources for All Queues
2118  * @adapter: board private structure
2119  *
2120  * Free all transmit software resources
2121  **/
2122
2123 void
2124 e1000_free_all_tx_resources(struct e1000_adapter *adapter)
2125 {
2126         int i;
2127
2128         for (i = 0; i < adapter->num_tx_queues; i++)
2129                 e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
2130 }
2131
2132 static void
2133 e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
2134                         struct e1000_buffer *buffer_info)
2135 {
2136         if (buffer_info->dma) {
2137                 pci_unmap_page(adapter->pdev,
2138                                 buffer_info->dma,
2139                                 buffer_info->length,
2140                                 PCI_DMA_TODEVICE);
2141                 buffer_info->dma = 0;
2142         }
2143         if (buffer_info->skb) {
2144                 dev_kfree_skb_any(buffer_info->skb);
2145                 buffer_info->skb = NULL;
2146         }
2147         /* buffer_info must be completely set up in the transmit path */
2148 }
2149
2150 /**
2151  * e1000_clean_tx_ring - Free Tx Buffers
2152  * @adapter: board private structure
2153  * @tx_ring: ring to be cleaned
2154  **/
2155
2156 static void
2157 e1000_clean_tx_ring(struct e1000_adapter *adapter,
2158                     struct e1000_tx_ring *tx_ring)
2159 {
2160         struct e1000_buffer *buffer_info;
2161         unsigned long size;
2162         unsigned int i;
2163
2164         /* Free all the Tx ring sk_buffs */
2165
2166         for (i = 0; i < tx_ring->count; i++) {
2167                 buffer_info = &tx_ring->buffer_info[i];
2168                 e1000_unmap_and_free_tx_resource(adapter, buffer_info);
2169         }
2170
2171         size = sizeof(struct e1000_buffer) * tx_ring->count;
2172         memset(tx_ring->buffer_info, 0, size);
2173
2174         /* Zero out the descriptor ring */
2175
2176         memset(tx_ring->desc, 0, tx_ring->size);
2177
2178         tx_ring->next_to_use = 0;
2179         tx_ring->next_to_clean = 0;
2180         tx_ring->last_tx_tso = 0;
2181
2182         writel(0, adapter->hw.hw_addr + tx_ring->tdh);
2183         writel(0, adapter->hw.hw_addr + tx_ring->tdt);
2184 }
2185
2186 /**
2187  * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
2188  * @adapter: board private structure
2189  **/
2190
2191 static void
2192 e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
2193 {
2194         int i;
2195
2196         for (i = 0; i < adapter->num_tx_queues; i++)
2197                 e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]);
2198 }
2199
2200 /**
2201  * e1000_free_rx_resources - Free Rx Resources
2202  * @adapter: board private structure
2203  * @rx_ring: ring to clean the resources from
2204  *
2205  * Free all receive software resources
2206  **/
2207
2208 static void
2209 e1000_free_rx_resources(struct e1000_adapter *adapter,
2210                         struct e1000_rx_ring *rx_ring)
2211 {
2212         struct pci_dev *pdev = adapter->pdev;
2213
2214         e1000_clean_rx_ring(adapter, rx_ring);
2215
2216         vfree(rx_ring->buffer_info);
2217         rx_ring->buffer_info = NULL;
2218         kfree(rx_ring->ps_page);
2219         rx_ring->ps_page = NULL;
2220         kfree(rx_ring->ps_page_dma);
2221         rx_ring->ps_page_dma = NULL;
2222
2223         pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
2224
2225         rx_ring->desc = NULL;
2226 }
2227
2228 /**
2229  * e1000_free_all_rx_resources - Free Rx Resources for All Queues
2230  * @adapter: board private structure
2231  *
2232  * Free all receive software resources
2233  **/
2234
2235 void
2236 e1000_free_all_rx_resources(struct e1000_adapter *adapter)
2237 {
2238         int i;
2239
2240         for (i = 0; i < adapter->num_rx_queues; i++)
2241                 e1000_free_rx_resources(adapter, &adapter->rx_ring[i]);
2242 }
2243
2244 /**
2245  * e1000_clean_rx_ring - Free Rx Buffers per Queue
2246  * @adapter: board private structure
2247  * @rx_ring: ring to free buffers from
2248  **/
2249
2250 static void
2251 e1000_clean_rx_ring(struct e1000_adapter *adapter,
2252                     struct e1000_rx_ring *rx_ring)
2253 {
2254         struct e1000_buffer *buffer_info;
2255         struct e1000_ps_page *ps_page;
2256         struct e1000_ps_page_dma *ps_page_dma;
2257         struct pci_dev *pdev = adapter->pdev;
2258         unsigned long size;
2259         unsigned int i, j;
2260
2261         /* Free all the Rx ring sk_buffs */
2262         for (i = 0; i < rx_ring->count; i++) {
2263                 buffer_info = &rx_ring->buffer_info[i];
2264                 if (buffer_info->skb) {
2265                         pci_unmap_single(pdev,
2266                                          buffer_info->dma,
2267                                          buffer_info->length,
2268                                          PCI_DMA_FROMDEVICE);
2269
2270                         dev_kfree_skb(buffer_info->skb);
2271                         buffer_info->skb = NULL;
2272                 }
2273                 ps_page = &rx_ring->ps_page[i];
2274                 ps_page_dma = &rx_ring->ps_page_dma[i];
2275                 for (j = 0; j < adapter->rx_ps_pages; j++) {
2276                         if (!ps_page->ps_page[j]) break;
2277                         pci_unmap_page(pdev,
2278                                        ps_page_dma->ps_page_dma[j],
2279                                        PAGE_SIZE, PCI_DMA_FROMDEVICE);
2280                         ps_page_dma->ps_page_dma[j] = 0;
2281                         put_page(ps_page->ps_page[j]);
2282                         ps_page->ps_page[j] = NULL;
2283                 }
2284         }
2285
2286         size = sizeof(struct e1000_buffer) * rx_ring->count;
2287         memset(rx_ring->buffer_info, 0, size);
2288         size = sizeof(struct e1000_ps_page) * rx_ring->count;
2289         memset(rx_ring->ps_page, 0, size);
2290         size = sizeof(struct e1000_ps_page_dma) * rx_ring->count;
2291         memset(rx_ring->ps_page_dma, 0, size);
2292
2293         /* Zero out the descriptor ring */
2294
2295         memset(rx_ring->desc, 0, rx_ring->size);
2296
2297         rx_ring->next_to_clean = 0;
2298         rx_ring->next_to_use = 0;
2299
2300         writel(0, adapter->hw.hw_addr + rx_ring->rdh);
2301         writel(0, adapter->hw.hw_addr + rx_ring->rdt);
2302 }
2303
2304 /**
2305  * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
2306  * @adapter: board private structure
2307  **/
2308
2309 static void
2310 e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
2311 {
2312         int i;
2313
2314         for (i = 0; i < adapter->num_rx_queues; i++)
2315                 e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]);
2316 }
2317
2318 /* The 82542 2.0 (revision 2) needs to have the receive unit in reset
2319  * and memory write and invalidate disabled for certain operations
2320  */
2321 static void
2322 e1000_enter_82542_rst(struct e1000_adapter *adapter)
2323 {
2324         struct net_device *netdev = adapter->netdev;
2325         uint32_t rctl;
2326
2327         e1000_pci_clear_mwi(&adapter->hw);
2328
2329         rctl = E1000_READ_REG(&adapter->hw, RCTL);
2330         rctl |= E1000_RCTL_RST;
2331         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
2332         E1000_WRITE_FLUSH(&adapter->hw);
2333         mdelay(5);
2334
2335         if (netif_running(netdev))
2336                 e1000_clean_all_rx_rings(adapter);
2337 }
2338
2339 static void
2340 e1000_leave_82542_rst(struct e1000_adapter *adapter)
2341 {
2342         struct net_device *netdev = adapter->netdev;
2343         uint32_t rctl;
2344
2345         rctl = E1000_READ_REG(&adapter->hw, RCTL);
2346         rctl &= ~E1000_RCTL_RST;
2347         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
2348         E1000_WRITE_FLUSH(&adapter->hw);
2349         mdelay(5);
2350
2351         if (adapter->hw.pci_cmd_word & PCI_COMMAND_INVALIDATE)
2352                 e1000_pci_set_mwi(&adapter->hw);
2353
2354         if (netif_running(netdev)) {
2355                 /* No need to loop, because 82542 supports only 1 queue */
2356                 struct e1000_rx_ring *ring = &adapter->rx_ring[0];
2357                 e1000_configure_rx(adapter);
2358                 adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
2359         }
2360 }
2361
2362 /**
2363  * e1000_set_mac - Change the Ethernet Address of the NIC
2364  * @netdev: network interface device structure
2365  * @p: pointer to an address structure
2366  *
2367  * Returns 0 on success, negative on failure
2368  **/
2369
2370 static int
2371 e1000_set_mac(struct net_device *netdev, void *p)
2372 {
2373         struct e1000_adapter *adapter = netdev_priv(netdev);
2374         struct sockaddr *addr = p;
2375
2376         if (!is_valid_ether_addr(addr->sa_data))
2377                 return -EADDRNOTAVAIL;
2378
2379         /* 82542 2.0 needs to be in reset to write receive address registers */
2380
2381         if (adapter->hw.mac_type == e1000_82542_rev2_0)
2382                 e1000_enter_82542_rst(adapter);
2383
2384         memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
2385         memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
2386
2387         e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
2388
2389         /* With 82571 controllers, LAA may be overwritten (with the default)
2390          * due to controller reset from the other port. */
2391         if (adapter->hw.mac_type == e1000_82571) {
2392                 /* activate the work around */
2393                 adapter->hw.laa_is_present = 1;
2394
2395                 /* Hold a copy of the LAA in RAR[14] This is done so that
2396                  * between the time RAR[0] gets clobbered  and the time it
2397                  * gets fixed (in e1000_watchdog), the actual LAA is in one
2398                  * of the RARs and no incoming packets directed to this port
2399                  * are dropped. Eventaully the LAA will be in RAR[0] and
2400                  * RAR[14] */
2401                 e1000_rar_set(&adapter->hw, adapter->hw.mac_addr,
2402                                         E1000_RAR_ENTRIES - 1);
2403         }
2404
2405         if (adapter->hw.mac_type == e1000_82542_rev2_0)
2406                 e1000_leave_82542_rst(adapter);
2407
2408         return 0;
2409 }
2410
2411 /**
2412  * e1000_set_multi - Multicast and Promiscuous mode set
2413  * @netdev: network interface device structure
2414  *
2415  * The set_multi entry point is called whenever the multicast address
2416  * list or the network interface flags are updated.  This routine is
2417  * responsible for configuring the hardware for proper multicast,
2418  * promiscuous mode, and all-multi behavior.
2419  **/
2420
2421 static void
2422 e1000_set_multi(struct net_device *netdev)
2423 {
2424         struct e1000_adapter *adapter = netdev_priv(netdev);
2425         struct e1000_hw *hw = &adapter->hw;
2426         struct dev_mc_list *mc_ptr;
2427         uint32_t rctl;
2428         uint32_t hash_value;
2429         int i, rar_entries = E1000_RAR_ENTRIES;
2430         int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
2431                                 E1000_NUM_MTA_REGISTERS_ICH8LAN :
2432                                 E1000_NUM_MTA_REGISTERS;
2433
2434         if (adapter->hw.mac_type == e1000_ich8lan)
2435                 rar_entries = E1000_RAR_ENTRIES_ICH8LAN;
2436
2437         /* reserve RAR[14] for LAA over-write work-around */
2438         if (adapter->hw.mac_type == e1000_82571)
2439                 rar_entries--;
2440
2441         /* Check for Promiscuous and All Multicast modes */
2442
2443         rctl = E1000_READ_REG(hw, RCTL);
2444
2445         if (netdev->flags & IFF_PROMISC) {
2446                 rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
2447         } else if (netdev->flags & IFF_ALLMULTI) {
2448                 rctl |= E1000_RCTL_MPE;
2449                 rctl &= ~E1000_RCTL_UPE;
2450         } else {
2451                 rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
2452         }
2453
2454         E1000_WRITE_REG(hw, RCTL, rctl);
2455
2456         /* 82542 2.0 needs to be in reset to write receive address registers */
2457
2458         if (hw->mac_type == e1000_82542_rev2_0)
2459                 e1000_enter_82542_rst(adapter);
2460
2461         /* load the first 14 multicast address into the exact filters 1-14
2462          * RAR 0 is used for the station MAC adddress
2463          * if there are not 14 addresses, go ahead and clear the filters
2464          * -- with 82571 controllers only 0-13 entries are filled here
2465          */
2466         mc_ptr = netdev->mc_list;
2467
2468         for (i = 1; i < rar_entries; i++) {
2469                 if (mc_ptr) {
2470                         e1000_rar_set(hw, mc_ptr->dmi_addr, i);
2471                         mc_ptr = mc_ptr->next;
2472                 } else {
2473                         E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
2474                         E1000_WRITE_FLUSH(hw);
2475                         E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
2476                         E1000_WRITE_FLUSH(hw);
2477                 }
2478         }
2479
2480         /* clear the old settings from the multicast hash table */
2481
2482         for (i = 0; i < mta_reg_count; i++) {
2483                 E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
2484                 E1000_WRITE_FLUSH(hw);
2485         }
2486
2487         /* load any remaining addresses into the hash table */
2488
2489         for (; mc_ptr; mc_ptr = mc_ptr->next) {
2490                 hash_value = e1000_hash_mc_addr(hw, mc_ptr->dmi_addr);
2491                 e1000_mta_set(hw, hash_value);
2492         }
2493
2494         if (hw->mac_type == e1000_82542_rev2_0)
2495                 e1000_leave_82542_rst(adapter);
2496 }
2497
2498 /* Need to wait a few seconds after link up to get diagnostic information from
2499  * the phy */
2500
2501 static void
2502 e1000_update_phy_info(unsigned long data)
2503 {
2504         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
2505         e1000_phy_get_info(&adapter->hw, &adapter->phy_info);
2506 }
2507
2508 /**
2509  * e1000_82547_tx_fifo_stall - Timer Call-back
2510  * @data: pointer to adapter cast into an unsigned long
2511  **/
2512
2513 static void
2514 e1000_82547_tx_fifo_stall(unsigned long data)
2515 {
2516         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
2517         struct net_device *netdev = adapter->netdev;
2518         uint32_t tctl;
2519
2520         if (atomic_read(&adapter->tx_fifo_stall)) {
2521                 if ((E1000_READ_REG(&adapter->hw, TDT) ==
2522                     E1000_READ_REG(&adapter->hw, TDH)) &&
2523                    (E1000_READ_REG(&adapter->hw, TDFT) ==
2524                     E1000_READ_REG(&adapter->hw, TDFH)) &&
2525                    (E1000_READ_REG(&adapter->hw, TDFTS) ==
2526                     E1000_READ_REG(&adapter->hw, TDFHS))) {
2527                         tctl = E1000_READ_REG(&adapter->hw, TCTL);
2528                         E1000_WRITE_REG(&adapter->hw, TCTL,
2529                                         tctl & ~E1000_TCTL_EN);
2530                         E1000_WRITE_REG(&adapter->hw, TDFT,
2531                                         adapter->tx_head_addr);
2532                         E1000_WRITE_REG(&adapter->hw, TDFH,
2533                                         adapter->tx_head_addr);
2534                         E1000_WRITE_REG(&adapter->hw, TDFTS,
2535                                         adapter->tx_head_addr);
2536                         E1000_WRITE_REG(&adapter->hw, TDFHS,
2537                                         adapter->tx_head_addr);
2538                         E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
2539                         E1000_WRITE_FLUSH(&adapter->hw);
2540
2541                         adapter->tx_fifo_head = 0;
2542                         atomic_set(&adapter->tx_fifo_stall, 0);
2543                         netif_wake_queue(netdev);
2544                 } else {
2545                         mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
2546                 }
2547         }
2548 }
2549
2550 /**
2551  * e1000_watchdog - Timer Call-back
2552  * @data: pointer to adapter cast into an unsigned long
2553  **/
2554 static void
2555 e1000_watchdog(unsigned long data)
2556 {
2557         struct e1000_adapter *adapter = (struct e1000_adapter *) data;
2558         struct net_device *netdev = adapter->netdev;
2559         struct e1000_tx_ring *txdr = adapter->tx_ring;
2560         uint32_t link, tctl;
2561         int32_t ret_val;
2562
2563         ret_val = e1000_check_for_link(&adapter->hw);
2564         if ((ret_val == E1000_ERR_PHY) &&
2565             (adapter->hw.phy_type == e1000_phy_igp_3) &&
2566             (E1000_READ_REG(&adapter->hw, CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
2567                 /* See e1000_kumeran_lock_loss_workaround() */
2568                 DPRINTK(LINK, INFO,
2569                         "Gigabit has been disabled, downgrading speed\n");
2570         }
2571
2572         if (adapter->hw.mac_type == e1000_82573) {
2573                 e1000_enable_tx_pkt_filtering(&adapter->hw);
2574                 if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)
2575                         e1000_update_mng_vlan(adapter);
2576         }
2577
2578         if ((adapter->hw.media_type == e1000_media_type_internal_serdes) &&
2579            !(E1000_READ_REG(&adapter->hw, TXCW) & E1000_TXCW_ANE))
2580                 link = !adapter->hw.serdes_link_down;
2581         else
2582                 link = E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU;
2583
2584         if (link) {
2585                 if (!netif_carrier_ok(netdev)) {
2586                         boolean_t txb2b = 1;
2587                         e1000_get_speed_and_duplex(&adapter->hw,
2588                                                    &adapter->link_speed,
2589                                                    &adapter->link_duplex);
2590
2591                         DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s\n",
2592                                adapter->link_speed,
2593                                adapter->link_duplex == FULL_DUPLEX ?
2594                                "Full Duplex" : "Half Duplex");
2595
2596                         /* tweak tx_queue_len according to speed/duplex
2597                          * and adjust the timeout factor */
2598                         netdev->tx_queue_len = adapter->tx_queue_len;
2599                         adapter->tx_timeout_factor = 1;
2600                         switch (adapter->link_speed) {
2601                         case SPEED_10:
2602                                 txb2b = 0;
2603                                 netdev->tx_queue_len = 10;
2604                                 adapter->tx_timeout_factor = 8;
2605                                 break;
2606                         case SPEED_100:
2607                                 txb2b = 0;
2608                                 netdev->tx_queue_len = 100;
2609                                 /* maybe add some timeout factor ? */
2610                                 break;
2611                         }
2612
2613                         if ((adapter->hw.mac_type == e1000_82571 ||
2614                              adapter->hw.mac_type == e1000_82572) &&
2615                             txb2b == 0) {
2616                                 uint32_t tarc0;
2617                                 tarc0 = E1000_READ_REG(&adapter->hw, TARC0);
2618                                 tarc0 &= ~(1 << 21);
2619                                 E1000_WRITE_REG(&adapter->hw, TARC0, tarc0);
2620                         }
2621
2622 #ifdef NETIF_F_TSO
2623                         /* disable TSO for pcie and 10/100 speeds, to avoid
2624                          * some hardware issues */
2625                         if (!adapter->tso_force &&
2626                             adapter->hw.bus_type == e1000_bus_type_pci_express){
2627                                 switch (adapter->link_speed) {
2628                                 case SPEED_10:
2629                                 case SPEED_100:
2630                                         DPRINTK(PROBE,INFO,
2631                                         "10/100 speed: disabling TSO\n");
2632                                         netdev->features &= ~NETIF_F_TSO;
2633 #ifdef NETIF_F_TSO6
2634                                         netdev->features &= ~NETIF_F_TSO6;
2635 #endif
2636                                         break;
2637                                 case SPEED_1000:
2638                                         netdev->features |= NETIF_F_TSO;
2639 #ifdef NETIF_F_TSO6
2640                                         netdev->features |= NETIF_F_TSO6;
2641 #endif
2642                                         break;
2643                                 default:
2644                                         /* oops */
2645                                         break;
2646                                 }
2647                         }
2648 #endif
2649
2650                         /* enable transmits in the hardware, need to do this
2651                          * after setting TARC0 */
2652                         tctl = E1000_READ_REG(&adapter->hw, TCTL);
2653                         tctl |= E1000_TCTL_EN;
2654                         E1000_WRITE_REG(&adapter->hw, TCTL, tctl);
2655
2656                         netif_carrier_on(netdev);
2657                         netif_wake_queue(netdev);
2658                         mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
2659                         adapter->smartspeed = 0;
2660                 } else {
2661                         /* make sure the receive unit is started */
2662                         if (adapter->hw.rx_needs_kicking) {
2663                                 struct e1000_hw *hw = &adapter->hw;
2664                                 uint32_t rctl = E1000_READ_REG(hw, RCTL);
2665                                 E1000_WRITE_REG(hw, RCTL, rctl | E1000_RCTL_EN);
2666                         }
2667                 }
2668         } else {
2669                 if (netif_carrier_ok(netdev)) {
2670                         adapter->link_speed = 0;
2671                         adapter->link_duplex = 0;
2672                         DPRINTK(LINK, INFO, "NIC Link is Down\n");
2673                         netif_carrier_off(netdev);
2674                         netif_stop_queue(netdev);
2675                         mod_timer(&adapter->phy_info_timer, jiffies + 2 * HZ);
2676
2677                         /* 80003ES2LAN workaround--
2678                          * For packet buffer work-around on link down event;
2679                          * disable receives in the ISR and
2680                          * reset device here in the watchdog
2681                          */
2682                         if (adapter->hw.mac_type == e1000_80003es2lan)
2683                                 /* reset device */
2684                                 schedule_work(&adapter->reset_task);
2685                 }
2686
2687                 e1000_smartspeed(adapter);
2688         }
2689
2690         e1000_update_stats(adapter);
2691
2692         adapter->hw.tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
2693         adapter->tpt_old = adapter->stats.tpt;
2694         adapter->hw.collision_delta = adapter->stats.colc - adapter->colc_old;
2695         adapter->colc_old = adapter->stats.colc;
2696
2697         adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
2698         adapter->gorcl_old = adapter->stats.gorcl;
2699         adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
2700         adapter->gotcl_old = adapter->stats.gotcl;
2701
2702         e1000_update_adaptive(&adapter->hw);
2703
2704         if (!netif_carrier_ok(netdev)) {
2705                 if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
2706                         /* We've lost link, so the controller stops DMA,
2707                          * but we've got queued Tx work that's never going
2708                          * to get done, so reset controller to flush Tx.
2709                          * (Do the reset outside of interrupt context). */
2710                         adapter->tx_timeout_count++;
2711                         schedule_work(&adapter->reset_task);
2712                 }
2713         }
2714
2715         /* Cause software interrupt to ensure rx ring is cleaned */
2716         E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0);
2717
2718         /* Force detection of hung controller every watchdog period */
2719         adapter->detect_tx_hung = TRUE;
2720
2721         /* With 82571 controllers, LAA may be overwritten due to controller
2722          * reset from the other port. Set the appropriate LAA in RAR[0] */
2723         if (adapter->hw.mac_type == e1000_82571 && adapter->hw.laa_is_present)
2724                 e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0);
2725
2726         /* Reset the timer */
2727         mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
2728 }
2729
2730 enum latency_range {
2731         lowest_latency = 0,
2732         low_latency = 1,
2733         bulk_latency = 2,
2734         latency_invalid = 255
2735 };
2736
2737 /**
2738  * e1000_update_itr - update the dynamic ITR value based on statistics
2739  *      Stores a new ITR value based on packets and byte
2740  *      counts during the last interrupt.  The advantage of per interrupt
2741  *      computation is faster updates and more accurate ITR for the current
2742  *      traffic pattern.  Constants in this function were computed
2743  *      based on theoretical maximum wire speed and thresholds were set based
2744  *      on testing data as well as attempting to minimize response time
2745  *      while increasing bulk throughput.
2746  *      this functionality is controlled by the InterruptThrottleRate module
2747  *      parameter (see e1000_param.c)
2748  * @adapter: pointer to adapter
2749  * @itr_setting: current adapter->itr
2750  * @packets: the number of packets during this measurement interval
2751  * @bytes: the number of bytes during this measurement interval
2752  **/
2753 static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
2754                                    uint16_t itr_setting,
2755                                    int packets,
2756                                    int bytes)
2757 {
2758         unsigned int retval = itr_setting;
2759         struct e1000_hw *hw = &adapter->hw;
2760
2761         if (unlikely(hw->mac_type < e1000_82540))
2762                 goto update_itr_done;
2763
2764         if (packets == 0)
2765                 goto update_itr_done;
2766
2767         switch (itr_setting) {
2768         case lowest_latency:
2769                 /* jumbo frames get bulk treatment*/
2770                 if (bytes/packets > 8000)
2771                         retval = bulk_latency;
2772                 else if ((packets < 5) && (bytes > 512))
2773                         retval = low_latency;
2774                 break;
2775         case low_latency:  /* 50 usec aka 20000 ints/s */
2776                 if (bytes > 10000) {
2777                         /* jumbo frames need bulk latency setting */
2778                         if (bytes/packets > 8000)
2779                                 retval = bulk_latency;
2780                         else if ((packets < 10) || ((bytes/packets) > 1200))
2781                                 retval = bulk_latency;
2782                         else if ((packets > 35))
2783                                 retval = lowest_latency;
2784                 } else if (bytes/packets > 2000)
2785                         retval = bulk_latency;
2786                 else if (packets <= 2 && bytes < 512)
2787                         retval = lowest_latency;
2788                 break;
2789         case bulk_latency: /* 250 usec aka 4000 ints/s */
2790                 if (bytes > 25000) {
2791                         if (packets > 35)
2792                                 retval = low_latency;
2793                 } else if (bytes < 6000) {
2794                         retval = low_latency;
2795                 }
2796                 break;
2797         }
2798
2799 update_itr_done:
2800         return retval;
2801 }
2802
2803 static void e1000_set_itr(struct e1000_adapter *adapter)
2804 {
2805         struct e1000_hw *hw = &adapter->hw;
2806         uint16_t current_itr;
2807         uint32_t new_itr = adapter->itr;
2808
2809         if (unlikely(hw->mac_type < e1000_82540))
2810                 return;
2811
2812         /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
2813         if (unlikely(adapter->link_speed != SPEED_1000)) {
2814                 current_itr = 0;
2815                 new_itr = 4000;
2816                 goto set_itr_now;
2817         }
2818
2819         adapter->tx_itr = e1000_update_itr(adapter,
2820                                     adapter->tx_itr,
2821                                     adapter->total_tx_packets,
2822                                     adapter->total_tx_bytes);
2823         /* conservative mode (itr 3) eliminates the lowest_latency setting */
2824         if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
2825                 adapter->tx_itr = low_latency;
2826
2827         adapter->rx_itr = e1000_update_itr(adapter,
2828                                     adapter->rx_itr,
2829                                     adapter->total_rx_packets,
2830                                     adapter->total_rx_bytes);
2831         /* conservative mode (itr 3) eliminates the lowest_latency setting */
2832         if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
2833                 adapter->rx_itr = low_latency;
2834
2835         current_itr = max(adapter->rx_itr, adapter->tx_itr);
2836
2837         switch (current_itr) {
2838         /* counts and packets in update_itr are dependent on these numbers */
2839         case lowest_latency:
2840                 new_itr = 70000;
2841                 break;
2842         case low_latency:
2843                 new_itr = 20000; /* aka hwitr = ~200 */
2844                 break;
2845         case bulk_latency:
2846                 new_itr = 4000;
2847                 break;
2848         default:
2849                 break;
2850         }
2851
2852 set_itr_now:
2853         if (new_itr != adapter->itr) {
2854                 /* this attempts to bias the interrupt rate towards Bulk
2855                  * by adding intermediate steps when interrupt rate is
2856                  * increasing */
2857                 new_itr = new_itr > adapter->itr ?
2858                              min(adapter->itr + (new_itr >> 2), new_itr) :
2859                              new_itr;
2860                 adapter->itr = new_itr;
2861                 E1000_WRITE_REG(hw, ITR, 1000000000 / (new_itr * 256));
2862         }
2863
2864         return;
2865 }
2866
2867 #define E1000_TX_FLAGS_CSUM             0x00000001
2868 #define E1000_TX_FLAGS_VLAN             0x00000002
2869 #define E1000_TX_FLAGS_TSO              0x00000004
2870 #define E1000_TX_FLAGS_IPV4             0x00000008
2871 #define E1000_TX_FLAGS_VLAN_MASK        0xffff0000
2872 #define E1000_TX_FLAGS_VLAN_SHIFT       16
2873
2874 static int
2875 e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
2876           struct sk_buff *skb)
2877 {
2878 #ifdef NETIF_F_TSO
2879         struct e1000_context_desc *context_desc;
2880         struct e1000_buffer *buffer_info;
2881         unsigned int i;
2882         uint32_t cmd_length = 0;
2883         uint16_t ipcse = 0, tucse, mss;
2884         uint8_t ipcss, ipcso, tucss, tucso, hdr_len;
2885         int err;
2886
2887         if (skb_is_gso(skb)) {
2888                 if (skb_header_cloned(skb)) {
2889                         err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
2890                         if (err)
2891                                 return err;
2892                 }
2893
2894                 hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2));
2895                 mss = skb_shinfo(skb)->gso_size;
2896                 if (skb->protocol == htons(ETH_P_IP)) {
2897                         skb->nh.iph->tot_len = 0;
2898                         skb->nh.iph->check = 0;
2899                         skb->h.th->check =
2900                                 ~csum_tcpudp_magic(skb->nh.iph->saddr,
2901                                                    skb->nh.iph->daddr,
2902                                                    0,
2903                                                    IPPROTO_TCP,
2904                                                    0);
2905                         cmd_length = E1000_TXD_CMD_IP;
2906                         ipcse = skb->h.raw - skb->data - 1;
2907 #ifdef NETIF_F_TSO6
2908                 } else if (skb->protocol == htons(ETH_P_IPV6)) {
2909                         skb->nh.ipv6h->payload_len = 0;
2910                         skb->h.th->check =
2911                                 ~csum_ipv6_magic(&skb->nh.ipv6h->saddr,
2912                                                  &skb->nh.ipv6h->daddr,
2913                                                  0,
2914                                                  IPPROTO_TCP,
2915                                                  0);
2916                         ipcse = 0;
2917 #endif
2918                 }
2919                 ipcss = skb->nh.raw - skb->data;
2920                 ipcso = (void *)&(skb->nh.iph->check) - (void *)skb->data;
2921                 tucss = skb->h.raw - skb->data;
2922                 tucso = (void *)&(skb->h.th->check) - (void *)skb->data;
2923                 tucse = 0;
2924
2925                 cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
2926                                E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
2927
2928                 i = tx_ring->next_to_use;
2929                 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
2930                 buffer_info = &tx_ring->buffer_info[i];
2931
2932                 context_desc->lower_setup.ip_fields.ipcss  = ipcss;
2933                 context_desc->lower_setup.ip_fields.ipcso  = ipcso;
2934                 context_desc->lower_setup.ip_fields.ipcse  = cpu_to_le16(ipcse);
2935                 context_desc->upper_setup.tcp_fields.tucss = tucss;
2936                 context_desc->upper_setup.tcp_fields.tucso = tucso;
2937                 context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
2938                 context_desc->tcp_seg_setup.fields.mss     = cpu_to_le16(mss);
2939                 context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
2940                 context_desc->cmd_and_length = cpu_to_le32(cmd_length);
2941
2942                 buffer_info->time_stamp = jiffies;
2943                 buffer_info->next_to_watch = i;
2944
2945                 if (++i == tx_ring->count) i = 0;
2946                 tx_ring->next_to_use = i;
2947
2948                 return TRUE;
2949         }
2950 #endif
2951
2952         return FALSE;
2953 }
2954
2955 static boolean_t
2956 e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
2957               struct sk_buff *skb)
2958 {
2959         struct e1000_context_desc *context_desc;
2960         struct e1000_buffer *buffer_info;
2961         unsigned int i;
2962         uint8_t css;
2963
2964         if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
2965                 css = skb->h.raw - skb->data;
2966
2967                 i = tx_ring->next_to_use;
2968                 buffer_info = &tx_ring->buffer_info[i];
2969                 context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
2970
2971                 context_desc->upper_setup.tcp_fields.tucss = css;
2972                 context_desc->upper_setup.tcp_fields.tucso = css + skb->csum_offset;
2973                 context_desc->upper_setup.tcp_fields.tucse = 0;
2974                 context_desc->tcp_seg_setup.data = 0;
2975                 context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT);
2976
2977                 buffer_info->time_stamp = jiffies;
2978                 buffer_info->next_to_watch = i;
2979
2980                 if (unlikely(++i == tx_ring->count)) i = 0;
2981                 tx_ring->next_to_use = i;
2982
2983                 return TRUE;
2984         }
2985
2986         return FALSE;
2987 }
2988
2989 #define E1000_MAX_TXD_PWR       12
2990 #define E1000_MAX_DATA_PER_TXD  (1<<E1000_MAX_TXD_PWR)
2991
2992 static int
2993 e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
2994              struct sk_buff *skb, unsigned int first, unsigned int max_per_txd,
2995              unsigned int nr_frags, unsigned int mss)
2996 {
2997         struct e1000_buffer *buffer_info;
2998         unsigned int len = skb->len;
2999         unsigned int offset = 0, size, count = 0, i;
3000         unsigned int f;
3001         len -= skb->data_len;
3002
3003         i = tx_ring->next_to_use;
3004
3005         while (len) {
3006                 buffer_info = &tx_ring->buffer_info[i];
3007                 size = min(len, max_per_txd);
3008 #ifdef NETIF_F_TSO
3009                 /* Workaround for Controller erratum --
3010                  * descriptor for non-tso packet in a linear SKB that follows a
3011                  * tso gets written back prematurely before the data is fully
3012                  * DMA'd to the controller */
3013                 if (!skb->data_len && tx_ring->last_tx_tso &&
3014                     !skb_is_gso(skb)) {
3015                         tx_ring->last_tx_tso = 0;
3016                         size -= 4;
3017                 }
3018
3019                 /* Workaround for premature desc write-backs
3020                  * in TSO mode.  Append 4-byte sentinel desc */
3021                 if (unlikely(mss && !nr_frags && size == len && size > 8))
3022                         size -= 4;
3023 #endif
3024                 /* work-around for errata 10 and it applies
3025                  * to all controllers in PCI-X mode
3026                  * The fix is to make sure that the first descriptor of a
3027                  * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
3028                  */
3029                 if (unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
3030                                 (size > 2015) && count == 0))
3031                         size = 2015;
3032
3033                 /* Workaround for potential 82544 hang in PCI-X.  Avoid
3034                  * terminating buffers within evenly-aligned dwords. */
3035                 if (unlikely(adapter->pcix_82544 &&
3036                    !((unsigned long)(skb->data + offset + size - 1) & 4) &&
3037                    size > 4))
3038                         size -= 4;
3039
3040                 buffer_info->length = size;
3041                 buffer_info->dma =
3042                         pci_map_single(adapter->pdev,
3043                                 skb->data + offset,
3044                                 size,
3045                                 PCI_DMA_TODEVICE);
3046                 buffer_info->time_stamp = jiffies;
3047                 buffer_info->next_to_watch = i;
3048
3049                 len -= size;
3050                 offset += size;
3051                 count++;
3052                 if (unlikely(++i == tx_ring->count)) i = 0;
3053         }
3054
3055         for (f = 0; f < nr_frags; f++) {
3056                 struct skb_frag_struct *frag;
3057
3058                 frag = &skb_shinfo(skb)->frags[f];
3059                 len = frag->size;
3060                 offset = frag->page_offset;
3061
3062                 while (len) {
3063                         buffer_info = &tx_ring->buffer_info[i];
3064                         size = min(len, max_per_txd);
3065 #ifdef NETIF_F_TSO
3066                         /* Workaround for premature desc write-backs
3067                          * in TSO mode.  Append 4-byte sentinel desc */
3068                         if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
3069                                 size -= 4;
3070 #endif
3071                         /* Workaround for potential 82544 hang in PCI-X.
3072                          * Avoid terminating buffers within evenly-aligned
3073                          * dwords. */
3074                         if (unlikely(adapter->pcix_82544 &&
3075                            !((unsigned long)(frag->page+offset+size-1) & 4) &&
3076                            size > 4))
3077                                 size -= 4;
3078
3079                         buffer_info->length = size;
3080                         buffer_info->dma =
3081                                 pci_map_page(adapter->pdev,
3082                                         frag->page,
3083                                         offset,
3084                                         size,
3085                                         PCI_DMA_TODEVICE);
3086                         buffer_info->time_stamp = jiffies;
3087                         buffer_info->next_to_watch = i;
3088
3089                         len -= size;
3090                         offset += size;
3091                         count++;
3092                         if (unlikely(++i == tx_ring->count)) i = 0;
3093                 }
3094         }
3095
3096         i = (i == 0) ? tx_ring->count - 1 : i - 1;
3097         tx_ring->buffer_info[i].skb = skb;
3098         tx_ring->buffer_info[first].next_to_watch = i;
3099
3100         return count;
3101 }
3102
3103 static void
3104 e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
3105                int tx_flags, int count)
3106 {
3107         struct e1000_tx_desc *tx_desc = NULL;
3108         struct e1000_buffer *buffer_info;
3109         uint32_t txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
3110         unsigned int i;
3111
3112         if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
3113                 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
3114                              E1000_TXD_CMD_TSE;
3115                 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
3116
3117                 if (likely(tx_flags & E1000_TX_FLAGS_IPV4))
3118                         txd_upper |= E1000_TXD_POPTS_IXSM << 8;
3119         }
3120
3121         if (likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
3122                 txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
3123                 txd_upper |= E1000_TXD_POPTS_TXSM << 8;
3124         }
3125
3126         if (unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
3127                 txd_lower |= E1000_TXD_CMD_VLE;
3128                 txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
3129         }
3130
3131         i = tx_ring->next_to_use;
3132
3133         while (count--) {
3134                 buffer_info = &tx_ring->buffer_info[i];
3135                 tx_desc = E1000_TX_DESC(*tx_ring, i);
3136                 tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
3137                 tx_desc->lower.data =
3138                         cpu_to_le32(txd_lower | buffer_info->length);
3139                 tx_desc->upper.data = cpu_to_le32(txd_upper);
3140                 if (unlikely(++i == tx_ring->count)) i = 0;
3141         }
3142
3143         tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
3144
3145         /* Force memory writes to complete before letting h/w
3146          * know there are new descriptors to fetch.  (Only
3147          * applicable for weak-ordered memory model archs,
3148          * such as IA-64). */
3149         wmb();
3150
3151         tx_ring->next_to_use = i;
3152         writel(i, adapter->hw.hw_addr + tx_ring->tdt);
3153         /* we need this if more than one processor can write to our tail
3154          * at a time, it syncronizes IO on IA64/Altix systems */
3155         mmiowb();
3156 }
3157
3158 /**
3159  * 82547 workaround to avoid controller hang in half-duplex environment.
3160  * The workaround is to avoid queuing a large packet that would span
3161  * the internal Tx FIFO ring boundary by notifying the stack to resend
3162  * the packet at a later time.  This gives the Tx FIFO an opportunity to
3163  * flush all packets.  When that occurs, we reset the Tx FIFO pointers
3164  * to the beginning of the Tx FIFO.
3165  **/
3166
3167 #define E1000_FIFO_HDR                  0x10
3168 #define E1000_82547_PAD_LEN             0x3E0
3169
3170 static int
3171 e1000_82547_fifo_workaround(struct e1000_adapter *adapter, struct sk_buff *skb)
3172 {
3173         uint32_t fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
3174         uint32_t skb_fifo_len = skb->len + E1000_FIFO_HDR;
3175
3176         E1000_ROUNDUP(skb_fifo_len, E1000_FIFO_HDR);
3177
3178         if (adapter->link_duplex != HALF_DUPLEX)
3179                 goto no_fifo_stall_required;
3180
3181         if (atomic_read(&adapter->tx_fifo_stall))
3182                 return 1;
3183
3184         if (skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
3185                 atomic_set(&adapter->tx_fifo_stall, 1);
3186                 return 1;
3187         }
3188
3189 no_fifo_stall_required:
3190         adapter->tx_fifo_head += skb_fifo_len;
3191         if (adapter->tx_fifo_head >= adapter->tx_fifo_size)
3192                 adapter->tx_fifo_head -= adapter->tx_fifo_size;
3193         return 0;
3194 }
3195
3196 #define MINIMUM_DHCP_PACKET_SIZE 282
3197 static int
3198 e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb)
3199 {
3200         struct e1000_hw *hw =  &adapter->hw;
3201         uint16_t length, offset;
3202         if (vlan_tx_tag_present(skb)) {
3203                 if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
3204                         ( adapter->hw.mng_cookie.status &
3205                           E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
3206                         return 0;
3207         }
3208         if (skb->len > MINIMUM_DHCP_PACKET_SIZE) {
3209                 struct ethhdr *eth = (struct ethhdr *) skb->data;
3210                 if ((htons(ETH_P_IP) == eth->h_proto)) {
3211                         const struct iphdr *ip =
3212                                 (struct iphdr *)((uint8_t *)skb->data+14);
3213                         if (IPPROTO_UDP == ip->protocol) {
3214                                 struct udphdr *udp =
3215                                         (struct udphdr *)((uint8_t *)ip +
3216                                                 (ip->ihl << 2));
3217                                 if (ntohs(udp->dest) == 67) {
3218                                         offset = (uint8_t *)udp + 8 - skb->data;
3219                                         length = skb->len - offset;
3220
3221                                         return e1000_mng_write_dhcp_info(hw,
3222                                                         (uint8_t *)udp + 8,
3223                                                         length);
3224                                 }
3225                         }
3226                 }
3227         }
3228         return 0;
3229 }
3230
3231 static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
3232 {
3233         struct e1000_adapter *adapter = netdev_priv(netdev);
3234         struct e1000_tx_ring *tx_ring = adapter->tx_ring;
3235
3236         netif_stop_queue(netdev);
3237         /* Herbert's original patch had:
3238          *  smp_mb__after_netif_stop_queue();
3239          * but since that doesn't exist yet, just open code it. */
3240         smp_mb();
3241
3242         /* We need to check again in a case another CPU has just
3243          * made room available. */
3244         if (likely(E1000_DESC_UNUSED(tx_ring) < size))
3245                 return -EBUSY;
3246
3247         /* A reprieve! */
3248         netif_start_queue(netdev);
3249         ++adapter->restart_queue;
3250         return 0;
3251 }
3252
3253 static int e1000_maybe_stop_tx(struct net_device *netdev,
3254                                struct e1000_tx_ring *tx_ring, int size)
3255 {
3256         if (likely(E1000_DESC_UNUSED(tx_ring) >= size))
3257                 return 0;
3258         return __e1000_maybe_stop_tx(netdev, size);
3259 }
3260
3261 #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
3262 static int
3263 e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
3264 {
3265         struct e1000_adapter *adapter = netdev_priv(netdev);
3266         struct e1000_tx_ring *tx_ring;
3267         unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
3268         unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
3269         unsigned int tx_flags = 0;
3270         unsigned int len = skb->len;
3271         unsigned long flags;
3272         unsigned int nr_frags = 0;
3273         unsigned int mss = 0;
3274         int count = 0;
3275         int tso;
3276         unsigned int f;
3277         len -= skb->data_len;
3278
3279         /* This goes back to the question of how to logically map a tx queue
3280          * to a flow.  Right now, performance is impacted slightly negatively
3281          * if using multiple tx queues.  If the stack breaks away from a
3282          * single qdisc implementation, we can look at this again. */
3283         tx_ring = adapter->tx_ring;
3284
3285         if (unlikely(skb->len <= 0)) {
3286                 dev_kfree_skb_any(skb);
3287                 return NETDEV_TX_OK;
3288         }
3289
3290         /* 82571 and newer doesn't need the workaround that limited descriptor
3291          * length to 4kB */
3292         if (adapter->hw.mac_type >= e1000_82571)
3293                 max_per_txd = 8192;
3294
3295 #ifdef NETIF_F_TSO
3296         mss = skb_shinfo(skb)->gso_size;
3297         /* The controller does a simple calculation to
3298          * make sure there is enough room in the FIFO before
3299          * initiating the DMA for each buffer.  The calc is:
3300          * 4 = ceil(buffer len/mss).  To make sure we don't
3301          * overrun the FIFO, adjust the max buffer len if mss
3302          * drops. */
3303         if (mss) {
3304                 uint8_t hdr_len;
3305                 max_per_txd = min(mss << 2, max_per_txd);
3306                 max_txd_pwr = fls(max_per_txd) - 1;
3307
3308                 /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
3309                 * points to just header, pull a few bytes of payload from
3310                 * frags into skb->data */
3311                 hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2));
3312                 if (skb->data_len && (hdr_len == (skb->len - skb->data_len))) {
3313                         switch (adapter->hw.mac_type) {
3314                                 unsigned int pull_size;
3315                         case e1000_82544:
3316                                 /* Make sure we have room to chop off 4 bytes,
3317                                  * and that the end alignment will work out to
3318                                  * this hardware's requirements
3319                                  * NOTE: this is a TSO only workaround
3320                                  * if end byte alignment not correct move us
3321                                  * into the next dword */
3322                                 if ((unsigned long)(skb->tail - 1) & 4)
3323                                         break;
3324                                 /* fall through */
3325                         case e1000_82571:
3326                         case e1000_82572:
3327                         case e1000_82573:
3328                         case e1000_ich8lan:
3329                                 pull_size = min((unsigned int)4, skb->data_len);
3330                                 if (!__pskb_pull_tail(skb, pull_size)) {
3331                                         DPRINTK(DRV, ERR,
3332                                                 "__pskb_pull_tail failed.\n");
3333                                         dev_kfree_skb_any(skb);
3334                                         return NETDEV_TX_OK;
3335                                 }
3336                                 len = skb->len - skb->data_len;
3337                                 break;
3338                         default:
3339                                 /* do nothing */
3340                                 break;
3341                         }
3342                 }
3343         }
3344
3345         /* reserve a descriptor for the offload context */
3346         if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
3347                 count++;
3348         count++;
3349 #else
3350         if (skb->ip_summed == CHECKSUM_PARTIAL)
3351                 count++;
3352 #endif
3353
3354 #ifdef NETIF_F_TSO
3355         /* Controller Erratum workaround */
3356         if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
3357                 count++;
3358 #endif
3359
3360         count += TXD_USE_COUNT(len, max_txd_pwr);
3361
3362         if (adapter->pcix_82544)
3363                 count++;
3364
3365         /* work-around for errata 10 and it applies to all controllers
3366          * in PCI-X mode, so add one more descriptor to the count
3367          */
3368         if (unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) &&
3369                         (len > 2015)))
3370                 count++;
3371
3372         nr_frags = skb_shinfo(skb)->nr_frags;
3373         for (f = 0; f < nr_frags; f++)
3374                 count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
3375                                        max_txd_pwr);
3376         if (adapter->pcix_82544)
3377                 count += nr_frags;
3378
3379
3380         if (adapter->hw.tx_pkt_filtering &&
3381             (adapter->hw.mac_type == e1000_82573))
3382                 e1000_transfer_dhcp_info(adapter, skb);
3383
3384         local_irq_save(flags);
3385         if (!spin_trylock(&tx_ring->tx_lock)) {
3386                 /* Collision - tell upper layer to requeue */
3387                 local_irq_restore(flags);
3388                 return NETDEV_TX_LOCKED;
3389         }
3390
3391         /* need: count + 2 desc gap to keep tail from touching
3392          * head, otherwise try next time */
3393         if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2))) {
3394                 spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3395                 return NETDEV_TX_BUSY;
3396         }
3397
3398         if (unlikely(adapter->hw.mac_type == e1000_82547)) {
3399                 if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
3400                         netif_stop_queue(netdev);
3401                         mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
3402                         spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3403                         return NETDEV_TX_BUSY;
3404                 }
3405         }
3406
3407         if (unlikely(adapter->vlgrp && vlan_tx_tag_present(skb))) {
3408                 tx_flags |= E1000_TX_FLAGS_VLAN;
3409                 tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
3410         }
3411
3412         first = tx_ring->next_to_use;
3413
3414         tso = e1000_tso(adapter, tx_ring, skb);
3415         if (tso < 0) {
3416                 dev_kfree_skb_any(skb);
3417                 spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3418                 return NETDEV_TX_OK;
3419         }
3420
3421         if (likely(tso)) {
3422                 tx_ring->last_tx_tso = 1;
3423                 tx_flags |= E1000_TX_FLAGS_TSO;
3424         } else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
3425                 tx_flags |= E1000_TX_FLAGS_CSUM;
3426
3427         /* Old method was to assume IPv4 packet by default if TSO was enabled.
3428          * 82571 hardware supports TSO capabilities for IPv6 as well...
3429          * no longer assume, we must. */
3430         if (likely(skb->protocol == htons(ETH_P_IP)))
3431                 tx_flags |= E1000_TX_FLAGS_IPV4;
3432
3433         e1000_tx_queue(adapter, tx_ring, tx_flags,
3434                        e1000_tx_map(adapter, tx_ring, skb, first,
3435                                     max_per_txd, nr_frags, mss));
3436
3437         netdev->trans_start = jiffies;
3438
3439         /* Make sure there is space in the ring for the next send. */
3440         e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
3441
3442         spin_unlock_irqrestore(&tx_ring->tx_lock, flags);
3443         return NETDEV_TX_OK;
3444 }
3445
3446 /**
3447  * e1000_tx_timeout - Respond to a Tx Hang
3448  * @netdev: network interface device structure
3449  **/
3450
3451 static void
3452 e1000_tx_timeout(struct net_device *netdev)
3453 {
3454         struct e1000_adapter *adapter = netdev_priv(netdev);
3455
3456         /* Do the reset outside of interrupt context */
3457         adapter->tx_timeout_count++;
3458         schedule_work(&adapter->reset_task);
3459 }
3460
3461 static void
3462 e1000_reset_task(struct work_struct *work)
3463 {
3464         struct e1000_adapter *adapter =
3465                 container_of(work, struct e1000_adapter, reset_task);
3466
3467         e1000_reinit_locked(adapter);
3468 }
3469
3470 /**
3471  * e1000_get_stats - Get System Network Statistics
3472  * @netdev: network interface device structure
3473  *
3474  * Returns the address of the device statistics structure.
3475  * The statistics are actually updated from the timer callback.
3476  **/
3477
3478 static struct net_device_stats *
3479 e1000_get_stats(struct net_device *netdev)
3480 {
3481         struct e1000_adapter *adapter = netdev_priv(netdev);
3482
3483         /* only return the current stats */
3484         return &adapter->net_stats;
3485 }
3486
3487 /**
3488  * e1000_change_mtu - Change the Maximum Transfer Unit
3489  * @netdev: network interface device structure
3490  * @new_mtu: new value for maximum frame size
3491  *
3492  * Returns 0 on success, negative on failure
3493  **/
3494
3495 static int
3496 e1000_change_mtu(struct net_device *netdev, int new_mtu)
3497 {
3498         struct e1000_adapter *adapter = netdev_priv(netdev);
3499         int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
3500         uint16_t eeprom_data = 0;
3501
3502         if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
3503             (max_frame > MAX_JUMBO_FRAME_SIZE)) {
3504                 DPRINTK(PROBE, ERR, "Invalid MTU setting\n");
3505                 return -EINVAL;
3506         }
3507
3508         /* Adapter-specific max frame size limits. */
3509         switch (adapter->hw.mac_type) {
3510         case e1000_undefined ... e1000_82542_rev2_1:
3511         case e1000_ich8lan:
3512                 if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
3513                         DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
3514                         return -EINVAL;
3515                 }
3516                 break;
3517         case e1000_82573:
3518                 /* Jumbo Frames not supported if:
3519                  * - this is not an 82573L device
3520                  * - ASPM is enabled in any way (0x1A bits 3:2) */
3521                 e1000_read_eeprom(&adapter->hw, EEPROM_INIT_3GIO_3, 1,
3522                                   &eeprom_data);
3523                 if ((adapter->hw.device_id != E1000_DEV_ID_82573L) ||
3524                     (eeprom_data & EEPROM_WORD1A_ASPM_MASK)) {
3525                         if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) {
3526                                 DPRINTK(PROBE, ERR,
3527                                         "Jumbo Frames not supported.\n");
3528                                 return -EINVAL;
3529                         }
3530                         break;
3531                 }
3532                 /* ERT will be enabled later to enable wire speed receives */
3533
3534                 /* fall through to get support */
3535         case e1000_82571:
3536         case e1000_82572:
3537         case e1000_80003es2lan:
3538 #define MAX_STD_JUMBO_FRAME_SIZE 9234
3539                 if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
3540                         DPRINTK(PROBE, ERR, "MTU > 9216 not supported.\n");
3541                         return -EINVAL;
3542                 }
3543                 break;
3544         default:
3545                 /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
3546                 break;
3547         }
3548
3549         /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
3550          * means we reserve 2 more, this pushes us to allocate from the next
3551          * larger slab size
3552          * i.e. RXBUFFER_2048 --> size-4096 slab */
3553
3554         if (max_frame <= E1000_RXBUFFER_256)
3555                 adapter->rx_buffer_len = E1000_RXBUFFER_256;
3556         else if (max_frame <= E1000_RXBUFFER_512)
3557                 adapter->rx_buffer_len = E1000_RXBUFFER_512;
3558         else if (max_frame <= E1000_RXBUFFER_1024)
3559                 adapter->rx_buffer_len = E1000_RXBUFFER_1024;
3560         else if (max_frame <= E1000_RXBUFFER_2048)
3561                 adapter->rx_buffer_len = E1000_RXBUFFER_2048;
3562         else if (max_frame <= E1000_RXBUFFER_4096)
3563                 adapter->rx_buffer_len = E1000_RXBUFFER_4096;
3564         else if (max_frame <= E1000_RXBUFFER_8192)
3565                 adapter->rx_buffer_len = E1000_RXBUFFER_8192;
3566         else if (max_frame <= E1000_RXBUFFER_16384)
3567                 adapter->rx_buffer_len = E1000_RXBUFFER_16384;
3568
3569         /* adjust allocation if LPE protects us, and we aren't using SBP */
3570         if (!adapter->hw.tbi_compatibility_on &&
3571             ((max_frame == MAXIMUM_ETHERNET_FRAME_SIZE) ||
3572              (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
3573                 adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
3574
3575         netdev->mtu = new_mtu;
3576         adapter->hw.max_frame_size = max_frame;
3577
3578         if (netif_running(netdev))
3579                 e1000_reinit_locked(adapter);
3580
3581         return 0;
3582 }
3583
3584 /**
3585  * e1000_update_stats - Update the board statistics counters
3586  * @adapter: board private structure
3587  **/
3588
3589 void
3590 e1000_update_stats(struct e1000_adapter *adapter)
3591 {
3592         struct e1000_hw *hw = &adapter->hw;
3593         struct pci_dev *pdev = adapter->pdev;
3594         unsigned long flags;
3595         uint16_t phy_tmp;
3596
3597 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
3598
3599         /*
3600          * Prevent stats update while adapter is being reset, or if the pci
3601          * connection is down.
3602          */
3603         if (adapter->link_speed == 0)
3604                 return;
3605         if (pdev->error_state && pdev->error_state != pci_channel_io_normal)
3606                 return;
3607
3608         spin_lock_irqsave(&adapter->stats_lock, flags);
3609
3610         /* these counters are modified from e1000_adjust_tbi_stats,
3611          * called from the interrupt context, so they must only
3612          * be written while holding adapter->stats_lock
3613          */
3614
3615         adapter->stats.crcerrs += E1000_READ_REG(hw, CRCERRS);
3616         adapter->stats.gprc += E1000_READ_REG(hw, GPRC);
3617         adapter->stats.gorcl += E1000_READ_REG(hw, GORCL);
3618         adapter->stats.gorch += E1000_READ_REG(hw, GORCH);
3619         adapter->stats.bprc += E1000_READ_REG(hw, BPRC);
3620         adapter->stats.mprc += E1000_READ_REG(hw, MPRC);
3621         adapter->stats.roc += E1000_READ_REG(hw, ROC);
3622
3623         if (adapter->hw.mac_type != e1000_ich8lan) {
3624                 adapter->stats.prc64 += E1000_READ_REG(hw, PRC64);
3625                 adapter->stats.prc127 += E1000_READ_REG(hw, PRC127);
3626                 adapter->stats.prc255 += E1000_READ_REG(hw, PRC255);
3627                 adapter->stats.prc511 += E1000_READ_REG(hw, PRC511);
3628                 adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023);
3629                 adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522);
3630         }
3631
3632         adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS);
3633         adapter->stats.mpc += E1000_READ_REG(hw, MPC);
3634         adapter->stats.scc += E1000_READ_REG(hw, SCC);
3635         adapter->stats.ecol += E1000_READ_REG(hw, ECOL);
3636         adapter->stats.mcc += E1000_READ_REG(hw, MCC);
3637         adapter->stats.latecol += E1000_READ_REG(hw, LATECOL);
3638         adapter->stats.dc += E1000_READ_REG(hw, DC);
3639         adapter->stats.sec += E1000_READ_REG(hw, SEC);
3640         adapter->stats.rlec += E1000_READ_REG(hw, RLEC);
3641         adapter->stats.xonrxc += E1000_READ_REG(hw, XONRXC);
3642         adapter->stats.xontxc += E1000_READ_REG(hw, XONTXC);
3643         adapter->stats.xoffrxc += E1000_READ_REG(hw, XOFFRXC);
3644         adapter->stats.xofftxc += E1000_READ_REG(hw, XOFFTXC);
3645         adapter->stats.fcruc += E1000_READ_REG(hw, FCRUC);
3646         adapter->stats.gptc += E1000_READ_REG(hw, GPTC);
3647         adapter->stats.gotcl += E1000_READ_REG(hw, GOTCL);
3648         adapter->stats.gotch += E1000_READ_REG(hw, GOTCH);
3649         adapter->stats.rnbc += E1000_READ_REG(hw, RNBC);
3650         adapter->stats.ruc += E1000_READ_REG(hw, RUC);
3651         adapter->stats.rfc += E1000_READ_REG(hw, RFC);
3652         adapter->stats.rjc += E1000_READ_REG(hw, RJC);
3653         adapter->stats.torl += E1000_READ_REG(hw, TORL);
3654         adapter->stats.torh += E1000_READ_REG(hw, TORH);
3655         adapter->stats.totl += E1000_READ_REG(hw, TOTL);
3656         adapter->stats.toth += E1000_READ_REG(hw, TOTH);
3657         adapter->stats.tpr += E1000_READ_REG(hw, TPR);
3658
3659         if (adapter->hw.mac_type != e1000_ich8lan) {
3660                 adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64);
3661                 adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127);
3662                 adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255);
3663                 adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511);
3664                 adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023);
3665                 adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522);
3666         }
3667
3668         adapter->stats.mptc += E1000_READ_REG(hw, MPTC);
3669         adapter->stats.bptc += E1000_READ_REG(hw, BPTC);
3670
3671         /* used for adaptive IFS */
3672
3673         hw->tx_packet_delta = E1000_READ_REG(hw, TPT);
3674         adapter->stats.tpt += hw->tx_packet_delta;
3675         hw->collision_delta = E1000_READ_REG(hw, COLC);
3676         adapter->stats.colc += hw->collision_delta;
3677
3678         if (hw->mac_type >= e1000_82543) {
3679                 adapter->stats.algnerrc += E1000_READ_REG(hw, ALGNERRC);
3680                 adapter->stats.rxerrc += E1000_READ_REG(hw, RXERRC);
3681                 adapter->stats.tncrs += E1000_READ_REG(hw, TNCRS);
3682                 adapter->stats.cexterr += E1000_READ_REG(hw, CEXTERR);
3683                 adapter->stats.tsctc += E1000_READ_REG(hw, TSCTC);
3684                 adapter->stats.tsctfc += E1000_READ_REG(hw, TSCTFC);
3685         }
3686         if (hw->mac_type > e1000_82547_rev_2) {
3687                 adapter->stats.iac += E1000_READ_REG(hw, IAC);
3688                 adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC);
3689
3690                 if (adapter->hw.mac_type != e1000_ich8lan) {
3691                         adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC);
3692                         adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC);
3693                         adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC);
3694                         adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC);
3695                         adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC);
3696                         adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC);
3697                         adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC);
3698                 }
3699         }
3700
3701         /* Fill out the OS statistics structure */
3702         adapter->net_stats.rx_packets = adapter->stats.gprc;
3703         adapter->net_stats.tx_packets = adapter->stats.gptc;
3704         adapter->net_stats.rx_bytes = adapter->stats.gorcl;
3705         adapter->net_stats.tx_bytes = adapter->stats.gotcl;
3706         adapter->net_stats.multicast = adapter->stats.mprc;
3707         adapter->net_stats.collisions = adapter->stats.colc;
3708
3709         /* Rx Errors */
3710
3711         /* RLEC on some newer hardware can be incorrect so build
3712         * our own version based on RUC and ROC */
3713         adapter->net_stats.rx_errors = adapter->stats.rxerrc +
3714                 adapter->stats.crcerrs + adapter->stats.algnerrc +
3715                 adapter->stats.ruc + adapter->stats.roc +
3716                 adapter->stats.cexterr;
3717         adapter->stats.rlerrc = adapter->stats.ruc + adapter->stats.roc;
3718         adapter->net_stats.rx_length_errors = adapter->stats.rlerrc;
3719         adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
3720         adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
3721         adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
3722
3723         /* Tx Errors */
3724         adapter->stats.txerrc = adapter->stats.ecol + adapter->stats.latecol;
3725         adapter->net_stats.tx_errors = adapter->stats.txerrc;
3726         adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
3727         adapter->net_stats.tx_window_errors = adapter->stats.latecol;
3728         adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
3729         if (adapter->hw.bad_tx_carr_stats_fd &&
3730             adapter->link_duplex == FULL_DUPLEX) {
3731                 adapter->net_stats.tx_carrier_errors = 0;
3732                 adapter->stats.tncrs = 0;
3733         }
3734
3735         /* Tx Dropped needs to be maintained elsewhere */
3736
3737         /* Phy Stats */
3738         if (hw->media_type == e1000_media_type_copper) {
3739                 if ((adapter->link_speed == SPEED_1000) &&
3740                    (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
3741                         phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
3742                         adapter->phy_stats.idle_errors += phy_tmp;
3743                 }
3744
3745                 if ((hw->mac_type <= e1000_82546) &&
3746                    (hw->phy_type == e1000_phy_m88) &&
3747                    !e1000_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp))
3748                         adapter->phy_stats.receive_errors += phy_tmp;
3749         }
3750
3751         /* Management Stats */
3752         if (adapter->hw.has_smbus) {
3753                 adapter->stats.mgptc += E1000_READ_REG(hw, MGTPTC);
3754                 adapter->stats.mgprc += E1000_READ_REG(hw, MGTPRC);
3755                 adapter->stats.mgpdc += E1000_READ_REG(hw, MGTPDC);
3756         }
3757
3758         spin_unlock_irqrestore(&adapter->stats_lock, flags);
3759 }
3760 #ifdef CONFIG_PCI_MSI
3761
3762 /**
3763  * e1000_intr_msi - Interrupt Handler
3764  * @irq: interrupt number
3765  * @data: pointer to a network interface device structure
3766  **/
3767
3768 static irqreturn_t
3769 e1000_intr_msi(int irq, void *data)
3770 {
3771         struct net_device *netdev = data;
3772         struct e1000_adapter *adapter = netdev_priv(netdev);
3773         struct e1000_hw *hw = &adapter->hw;
3774 #ifndef CONFIG_E1000_NAPI
3775         int i;
3776 #endif
3777         uint32_t icr = E1000_READ_REG(hw, ICR);
3778
3779 #ifdef CONFIG_E1000_NAPI
3780         /* read ICR disables interrupts using IAM, so keep up with our
3781          * enable/disable accounting */
3782         atomic_inc(&adapter->irq_sem);
3783 #endif
3784         if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
3785                 hw->get_link_status = 1;
3786                 /* 80003ES2LAN workaround-- For packet buffer work-around on
3787                  * link down event; disable receives here in the ISR and reset
3788                  * adapter in watchdog */
3789                 if (netif_carrier_ok(netdev) &&
3790                     (adapter->hw.mac_type == e1000_80003es2lan)) {
3791                         /* disable receives */
3792                         uint32_t rctl = E1000_READ_REG(hw, RCTL);
3793                         E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
3794                 }
3795                 /* guard against interrupt when we're going down */
3796                 if (!test_bit(__E1000_DOWN, &adapter->flags))
3797                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
3798         }
3799
3800 #ifdef CONFIG_E1000_NAPI
3801         if (likely(netif_rx_schedule_prep(netdev))) {
3802                 adapter->total_tx_bytes = 0;
3803                 adapter->total_tx_packets = 0;
3804                 adapter->total_rx_bytes = 0;
3805                 adapter->total_rx_packets = 0;
3806                 __netif_rx_schedule(netdev);
3807         } else
3808                 e1000_irq_enable(adapter);
3809 #else
3810         adapter->total_tx_bytes = 0;
3811         adapter->total_rx_bytes = 0;
3812         adapter->total_tx_packets = 0;
3813         adapter->total_rx_packets = 0;
3814
3815         for (i = 0; i < E1000_MAX_INTR; i++)
3816                 if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
3817                    !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
3818                         break;
3819
3820         if (likely(adapter->itr_setting & 3))
3821                 e1000_set_itr(adapter);
3822 #endif
3823
3824         return IRQ_HANDLED;
3825 }
3826 #endif
3827
3828 /**
3829  * e1000_intr - Interrupt Handler
3830  * @irq: interrupt number
3831  * @data: pointer to a network interface device structure
3832  **/
3833
3834 static irqreturn_t
3835 e1000_intr(int irq, void *data)
3836 {
3837         struct net_device *netdev = data;
3838         struct e1000_adapter *adapter = netdev_priv(netdev);
3839         struct e1000_hw *hw = &adapter->hw;
3840         uint32_t rctl, icr = E1000_READ_REG(hw, ICR);
3841 #ifndef CONFIG_E1000_NAPI
3842         int i;
3843 #endif
3844         if (unlikely(!icr))
3845                 return IRQ_NONE;  /* Not our interrupt */
3846
3847 #ifdef CONFIG_E1000_NAPI
3848         /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
3849          * not set, then the adapter didn't send an interrupt */
3850         if (unlikely(hw->mac_type >= e1000_82571 &&
3851                      !(icr & E1000_ICR_INT_ASSERTED)))
3852                 return IRQ_NONE;
3853
3854         /* Interrupt Auto-Mask...upon reading ICR,
3855          * interrupts are masked.  No need for the
3856          * IMC write, but it does mean we should
3857          * account for it ASAP. */
3858         if (likely(hw->mac_type >= e1000_82571))
3859                 atomic_inc(&adapter->irq_sem);
3860 #endif
3861
3862         if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
3863                 hw->get_link_status = 1;
3864                 /* 80003ES2LAN workaround--
3865                  * For packet buffer work-around on link down event;
3866                  * disable receives here in the ISR and
3867                  * reset adapter in watchdog
3868                  */
3869                 if (netif_carrier_ok(netdev) &&
3870                     (adapter->hw.mac_type == e1000_80003es2lan)) {
3871                         /* disable receives */
3872                         rctl = E1000_READ_REG(hw, RCTL);
3873                         E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
3874                 }
3875                 /* guard against interrupt when we're going down */
3876                 if (!test_bit(__E1000_DOWN, &adapter->flags))
3877                         mod_timer(&adapter->watchdog_timer, jiffies + 1);
3878         }
3879
3880 #ifdef CONFIG_E1000_NAPI
3881         if (unlikely(hw->mac_type < e1000_82571)) {
3882                 /* disable interrupts, without the synchronize_irq bit */
3883                 atomic_inc(&adapter->irq_sem);
3884                 E1000_WRITE_REG(hw, IMC, ~0);
3885                 E1000_WRITE_FLUSH(hw);
3886         }
3887         if (likely(netif_rx_schedule_prep(netdev))) {
3888                 adapter->total_tx_bytes = 0;
3889                 adapter->total_tx_packets = 0;
3890                 adapter->total_rx_bytes = 0;
3891                 adapter->total_rx_packets = 0;
3892                 __netif_rx_schedule(netdev);
3893         } else
3894                 /* this really should not happen! if it does it is basically a
3895                  * bug, but not a hard error, so enable ints and continue */
3896                 e1000_irq_enable(adapter);
3897 #else
3898         /* Writing IMC and IMS is needed for 82547.
3899          * Due to Hub Link bus being occupied, an interrupt
3900          * de-assertion message is not able to be sent.
3901          * When an interrupt assertion message is generated later,
3902          * two messages are re-ordered and sent out.
3903          * That causes APIC to think 82547 is in de-assertion
3904          * state, while 82547 is in assertion state, resulting
3905          * in dead lock. Writing IMC forces 82547 into
3906          * de-assertion state.
3907          */
3908         if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2) {
3909                 atomic_inc(&adapter->irq_sem);
3910                 E1000_WRITE_REG(hw, IMC, ~0);
3911         }
3912
3913         adapter->total_tx_bytes = 0;
3914         adapter->total_rx_bytes = 0;
3915         adapter->total_tx_packets = 0;
3916         adapter->total_rx_packets = 0;
3917
3918         for (i = 0; i < E1000_MAX_INTR; i++)
3919                 if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
3920                    !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
3921                         break;
3922
3923         if (likely(adapter->itr_setting & 3))
3924                 e1000_set_itr(adapter);
3925
3926         if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2)
3927                 e1000_irq_enable(adapter);
3928
3929 #endif
3930         return IRQ_HANDLED;
3931 }
3932
3933 #ifdef CONFIG_E1000_NAPI
3934 /**
3935  * e1000_clean - NAPI Rx polling callback
3936  * @adapter: board private structure
3937  **/
3938
3939 static int
3940 e1000_clean(struct net_device *poll_dev, int *budget)
3941 {
3942         struct e1000_adapter *adapter;
3943         int work_to_do = min(*budget, poll_dev->quota);
3944         int tx_cleaned = 0, work_done = 0;
3945
3946         /* Must NOT use netdev_priv macro here. */
3947         adapter = poll_dev->priv;
3948
3949         /* Keep link state information with original netdev */
3950         if (!netif_carrier_ok(poll_dev))
3951                 goto quit_polling;
3952
3953         /* e1000_clean is called per-cpu.  This lock protects
3954          * tx_ring[0] from being cleaned by multiple cpus
3955          * simultaneously.  A failure obtaining the lock means
3956          * tx_ring[0] is currently being cleaned anyway. */
3957         if (spin_trylock(&adapter->tx_queue_lock)) {
3958                 tx_cleaned = e1000_clean_tx_irq(adapter,
3959                                                 &adapter->tx_ring[0]);
3960                 spin_unlock(&adapter->tx_queue_lock);
3961         }
3962
3963         adapter->clean_rx(adapter, &adapter->rx_ring[0],
3964                           &work_done, work_to_do);
3965
3966         *budget -= work_done;
3967         poll_dev->quota -= work_done;
3968
3969         /* If no Tx and not enough Rx work done, exit the polling mode */
3970         if ((!tx_cleaned && (work_done == 0)) ||
3971            !netif_running(poll_dev)) {
3972 quit_polling:
3973                 if (likely(adapter->itr_setting & 3))
3974                         e1000_set_itr(adapter);
3975                 netif_rx_complete(poll_dev);
3976                 e1000_irq_enable(adapter);
3977                 return 0;
3978         }
3979
3980         return 1;
3981 }
3982
3983 #endif
3984 /**
3985  * e1000_clean_tx_irq - Reclaim resources after transmit completes
3986  * @adapter: board private structure
3987  **/
3988
3989 static boolean_t
3990 e1000_clean_tx_irq(struct e1000_adapter *adapter,
3991                    struct e1000_tx_ring *tx_ring)
3992 {
3993         struct net_device *netdev = adapter->netdev;
3994         struct e1000_tx_desc *tx_desc, *eop_desc;
3995         struct e1000_buffer *buffer_info;
3996         unsigned int i, eop;
3997 #ifdef CONFIG_E1000_NAPI
3998         unsigned int count = 0;
3999 #endif
4000         boolean_t cleaned = FALSE;
4001         unsigned int total_tx_bytes=0, total_tx_packets=0;
4002
4003         i = tx_ring->next_to_clean;
4004         eop = tx_ring->buffer_info[i].next_to_watch;
4005         eop_desc = E1000_TX_DESC(*tx_ring, eop);
4006
4007         while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) {
4008                 for (cleaned = FALSE; !cleaned; ) {
4009                         tx_desc = E1000_TX_DESC(*tx_ring, i);
4010                         buffer_info = &tx_ring->buffer_info[i];
4011                         cleaned = (i == eop);
4012
4013                         if (cleaned) {
4014                                 struct sk_buff *skb = buffer_info->skb;
4015                                 unsigned int segs = skb_shinfo(skb)->gso_segs;
4016                                 total_tx_packets += segs;
4017                                 total_tx_packets++;
4018                                 total_tx_bytes += skb->len;
4019                         }
4020                         e1000_unmap_and_free_tx_resource(adapter, buffer_info);
4021                         tx_desc->upper.data = 0;
4022
4023                         if (unlikely(++i == tx_ring->count)) i = 0;
4024                 }
4025
4026                 eop = tx_ring->buffer_info[i].next_to_watch;
4027                 eop_desc = E1000_TX_DESC(*tx_ring, eop);
4028 #ifdef CONFIG_E1000_NAPI
4029 #define E1000_TX_WEIGHT 64
4030                 /* weight of a sort for tx, to avoid endless transmit cleanup */
4031                 if (count++ == E1000_TX_WEIGHT) break;
4032 #endif
4033         }
4034
4035         tx_ring->next_to_clean = i;
4036
4037 #define TX_WAKE_THRESHOLD 32
4038         if (unlikely(cleaned && netif_carrier_ok(netdev) &&
4039                      E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
4040                 /* Make sure that anybody stopping the queue after this
4041                  * sees the new next_to_clean.
4042                  */
4043                 smp_mb();
4044                 if (netif_queue_stopped(netdev)) {
4045                         netif_wake_queue(netdev);
4046                         ++adapter->restart_queue;
4047                 }
4048         }
4049
4050         if (adapter->detect_tx_hung) {
4051                 /* Detect a transmit hang in hardware, this serializes the
4052                  * check with the clearing of time_stamp and movement of i */
4053                 adapter->detect_tx_hung = FALSE;
4054                 if (tx_ring->buffer_info[eop].dma &&
4055                     time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
4056                                (adapter->tx_timeout_factor * HZ))
4057                     && !(E1000_READ_REG(&adapter->hw, STATUS) &
4058                          E1000_STATUS_TXOFF)) {
4059
4060                         /* detected Tx unit hang */
4061                         DPRINTK(DRV, ERR, "Detected Tx Unit Hang\n"
4062                                         "  Tx Queue             <%lu>\n"
4063                                         "  TDH                  <%x>\n"
4064                                         "  TDT                  <%x>\n"
4065                                         "  next_to_use          <%x>\n"
4066                                         "  next_to_clean        <%x>\n"
4067                                         "buffer_info[next_to_clean]\n"
4068                                         "  time_stamp           <%lx>\n"
4069                                         "  next_to_watch        <%x>\n"
4070                                         "  jiffies              <%lx>\n"
4071                                         "  next_to_watch.status <%x>\n",
4072                                 (unsigned long)((tx_ring - adapter->tx_ring) /
4073                                         sizeof(struct e1000_tx_ring)),
4074                                 readl(adapter->hw.hw_addr + tx_ring->tdh),
4075                                 readl(adapter->hw.hw_addr + tx_ring->tdt),
4076                                 tx_ring->next_to_use,
4077                                 tx_ring->next_to_clean,
4078                                 tx_ring->buffer_info[eop].time_stamp,
4079                                 eop,
4080                                 jiffies,
4081                                 eop_desc->upper.fields.status);
4082                         netif_stop_queue(netdev);
4083                 }
4084         }
4085         adapter->total_tx_bytes += total_tx_bytes;
4086         adapter->total_tx_packets += total_tx_packets;
4087         return cleaned;
4088 }
4089
4090 /**
4091  * e1000_rx_checksum - Receive Checksum Offload for 82543
4092  * @adapter:     board private structure
4093  * @status_err:  receive descriptor status and error fields
4094  * @csum:        receive descriptor csum field
4095  * @sk_buff:     socket buffer with received data
4096  **/
4097
4098 static void
4099 e1000_rx_checksum(struct e1000_adapter *adapter,
4100                   uint32_t status_err, uint32_t csum,
4101                   struct sk_buff *skb)
4102 {
4103         uint16_t status = (uint16_t)status_err;
4104         uint8_t errors = (uint8_t)(status_err >> 24);
4105         skb->ip_summed = CHECKSUM_NONE;
4106
4107         /* 82543 or newer only */
4108         if (unlikely(adapter->hw.mac_type < e1000_82543)) return;
4109         /* Ignore Checksum bit is set */
4110         if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
4111         /* TCP/UDP checksum error bit is set */
4112         if (unlikely(errors & E1000_RXD_ERR_TCPE)) {
4113                 /* let the stack verify checksum errors */
4114                 adapter->hw_csum_err++;
4115                 return;
4116         }
4117         /* TCP/UDP Checksum has not been calculated */
4118         if (adapter->hw.mac_type <= e1000_82547_rev_2) {
4119                 if (!(status & E1000_RXD_STAT_TCPCS))
4120                         return;
4121         } else {
4122                 if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
4123                         return;
4124         }
4125         /* It must be a TCP or UDP packet with a valid checksum */
4126         if (likely(status & E1000_RXD_STAT_TCPCS)) {
4127                 /* TCP checksum is good */
4128                 skb->ip_summed = CHECKSUM_UNNECESSARY;
4129         } else if (adapter->hw.mac_type > e1000_82547_rev_2) {
4130                 /* IP fragment with UDP payload */
4131                 /* Hardware complements the payload checksum, so we undo it
4132                  * and then put the value in host order for further stack use.
4133                  */
4134                 csum = ntohl(csum ^ 0xFFFF);
4135                 skb->csum = csum;
4136                 skb->ip_summed = CHECKSUM_COMPLETE;
4137         }
4138         adapter->hw_csum_good++;
4139 }
4140
4141 /**
4142  * e1000_clean_rx_irq - Send received data up the network stack; legacy
4143  * @adapter: board private structure
4144  **/
4145
4146 static boolean_t
4147 #ifdef CONFIG_E1000_NAPI
4148 e1000_clean_rx_irq(struct e1000_adapter *adapter,
4149                    struct e1000_rx_ring *rx_ring,
4150                    int *work_done, int work_to_do)
4151 #else
4152 e1000_clean_rx_irq(struct e1000_adapter *adapter,
4153                    struct e1000_rx_ring *rx_ring)
4154 #endif
4155 {
4156         struct net_device *netdev = adapter->netdev;
4157         struct pci_dev *pdev = adapter->pdev;
4158         struct e1000_rx_desc *rx_desc, *next_rxd;
4159         struct e1000_buffer *buffer_info, *next_buffer;
4160         unsigned long flags;
4161         uint32_t length;
4162         uint8_t last_byte;
4163         unsigned int i;
4164         int cleaned_count = 0;
4165         boolean_t cleaned = FALSE;
4166         unsigned int total_rx_bytes=0, total_rx_packets=0;
4167
4168         i = rx_ring->next_to_clean;
4169         rx_desc = E1000_RX_DESC(*rx_ring, i);
4170         buffer_info = &rx_ring->buffer_info[i];
4171
4172         while (rx_desc->status & E1000_RXD_STAT_DD) {
4173                 struct sk_buff *skb;
4174                 u8 status;
4175
4176 #ifdef CONFIG_E1000_NAPI
4177                 if (*work_done >= work_to_do)
4178                         break;
4179                 (*work_done)++;
4180 #endif
4181                 status = rx_desc->status;
4182                 skb = buffer_info->skb;
4183                 buffer_info->skb = NULL;
4184
4185                 prefetch(skb->data - NET_IP_ALIGN);
4186
4187                 if (++i == rx_ring->count) i = 0;
4188                 next_rxd = E1000_RX_DESC(*rx_ring, i);
4189                 prefetch(next_rxd);
4190
4191                 next_buffer = &rx_ring->buffer_info[i];
4192
4193                 cleaned = TRUE;
4194                 cleaned_count++;
4195                 pci_unmap_single(pdev,
4196                                  buffer_info->dma,
4197                                  buffer_info->length,
4198                                  PCI_DMA_FROMDEVICE);
4199
4200                 length = le16_to_cpu(rx_desc->length);
4201
4202                 if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
4203                         /* All receives must fit into a single buffer */
4204                         E1000_DBG("%s: Receive packet consumed multiple"
4205                                   " buffers\n", netdev->name);
4206                         /* recycle */
4207                         buffer_info->skb = skb;
4208                         goto next_desc;
4209                 }
4210
4211                 if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
4212                         last_byte = *(skb->data + length - 1);
4213                         if (TBI_ACCEPT(&adapter->hw, status,
4214                                       rx_desc->errors, length, last_byte)) {
4215                                 spin_lock_irqsave(&adapter->stats_lock, flags);
4216                                 e1000_tbi_adjust_stats(&adapter->hw,
4217                                                        &adapter->stats,
4218                                                        length, skb->data);
4219                                 spin_unlock_irqrestore(&adapter->stats_lock,
4220                                                        flags);
4221                                 length--;
4222                         } else {
4223                                 /* recycle */
4224                                 buffer_info->skb = skb;
4225                                 goto next_desc;
4226                         }
4227                 }
4228
4229                 /* adjust length to remove Ethernet CRC, this must be
4230                  * done after the TBI_ACCEPT workaround above */
4231                 length -= 4;
4232
4233                 /* probably a little skewed due to removing CRC */
4234                 total_rx_bytes += length;
4235                 total_rx_packets++;
4236
4237                 /* code added for copybreak, this should improve
4238                  * performance for small packets with large amounts
4239                  * of reassembly being done in the stack */
4240                 if (length < copybreak) {
4241                         struct sk_buff *new_skb =
4242                             netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
4243                         if (new_skb) {
4244                                 skb_reserve(new_skb, NET_IP_ALIGN);
4245                                 memcpy(new_skb->data - NET_IP_ALIGN,
4246                                        skb->data - NET_IP_ALIGN,
4247                                        length + NET_IP_ALIGN);
4248                                 /* save the skb in buffer_info as good */
4249                                 buffer_info->skb = skb;
4250                                 skb = new_skb;
4251                         }
4252                         /* else just continue with the old one */
4253                 }
4254                 /* end copybreak code */
4255                 skb_put(skb, length);
4256
4257                 /* Receive Checksum Offload */
4258                 e1000_rx_checksum(adapter,
4259                                   (uint32_t)(status) |
4260                                   ((uint32_t)(rx_desc->errors) << 24),
4261                                   le16_to_cpu(rx_desc->csum), skb);
4262
4263                 skb->protocol = eth_type_trans(skb, netdev);
4264 #ifdef CONFIG_E1000_NAPI
4265                 if (unlikely(adapter->vlgrp &&
4266                             (status & E1000_RXD_STAT_VP))) {
4267                         vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
4268                                                  le16_to_cpu(rx_desc->special) &
4269                                                  E1000_RXD_SPC_VLAN_MASK);
4270                 } else {
4271                         netif_receive_skb(skb);
4272                 }
4273 #else /* CONFIG_E1000_NAPI */
4274                 if (unlikely(adapter->vlgrp &&
4275                             (status & E1000_RXD_STAT_VP))) {
4276                         vlan_hwaccel_rx(skb, adapter->vlgrp,
4277                                         le16_to_cpu(rx_desc->special) &
4278                                         E1000_RXD_SPC_VLAN_MASK);
4279                 } else {
4280                         netif_rx(skb);
4281                 }
4282 #endif /* CONFIG_E1000_NAPI */
4283                 netdev->last_rx = jiffies;
4284
4285 next_desc:
4286                 rx_desc->status = 0;
4287
4288                 /* return some buffers to hardware, one at a time is too slow */
4289                 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
4290                         adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
4291                         cleaned_count = 0;
4292                 }
4293
4294                 /* use prefetched values */
4295                 rx_desc = next_rxd;
4296                 buffer_info = next_buffer;
4297         }
4298         rx_ring->next_to_clean = i;
4299
4300         cleaned_count = E1000_DESC_UNUSED(rx_ring);
4301         if (cleaned_count)
4302                 adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
4303
4304         adapter->total_rx_packets += total_rx_packets;
4305         adapter->total_rx_bytes += total_rx_bytes;
4306         return cleaned;
4307 }
4308
4309 /**
4310  * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
4311  * @adapter: board private structure
4312  **/
4313
4314 static boolean_t
4315 #ifdef CONFIG_E1000_NAPI
4316 e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
4317                       struct e1000_rx_ring *rx_ring,
4318                       int *work_done, int work_to_do)
4319 #else
4320 e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
4321                       struct e1000_rx_ring *rx_ring)
4322 #endif
4323 {
4324         union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
4325         struct net_device *netdev = adapter->netdev;
4326         struct pci_dev *pdev = adapter->pdev;
4327         struct e1000_buffer *buffer_info, *next_buffer;
4328         struct e1000_ps_page *ps_page;
4329         struct e1000_ps_page_dma *ps_page_dma;
4330         struct sk_buff *skb;
4331         unsigned int i, j;
4332         uint32_t length, staterr;
4333         int cleaned_count = 0;
4334         boolean_t cleaned = FALSE;
4335         unsigned int total_rx_bytes=0, total_rx_packets=0;
4336
4337         i = rx_ring->next_to_clean;
4338         rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
4339         staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
4340         buffer_info = &rx_ring->buffer_info[i];
4341
4342         while (staterr & E1000_RXD_STAT_DD) {
4343                 ps_page = &rx_ring->ps_page[i];
4344                 ps_page_dma = &rx_ring->ps_page_dma[i];
4345 #ifdef CONFIG_E1000_NAPI
4346                 if (unlikely(*work_done >= work_to_do))
4347                         break;
4348                 (*work_done)++;
4349 #endif
4350                 skb = buffer_info->skb;
4351
4352                 /* in the packet split case this is header only */
4353                 prefetch(skb->data - NET_IP_ALIGN);
4354
4355                 if (++i == rx_ring->count) i = 0;
4356                 next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
4357                 prefetch(next_rxd);
4358
4359                 next_buffer = &rx_ring->buffer_info[i];
4360
4361                 cleaned = TRUE;
4362                 cleaned_count++;
4363                 pci_unmap_single(pdev, buffer_info->dma,
4364                                  buffer_info->length,
4365                                  PCI_DMA_FROMDEVICE);
4366
4367                 if (unlikely(!(staterr & E1000_RXD_STAT_EOP))) {
4368                         E1000_DBG("%s: Packet Split buffers didn't pick up"
4369                                   " the full packet\n", netdev->name);
4370                         dev_kfree_skb_irq(skb);
4371                         goto next_desc;
4372                 }
4373
4374                 if (unlikely(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) {
4375                         dev_kfree_skb_irq(skb);
4376                         goto next_desc;
4377                 }
4378
4379                 length = le16_to_cpu(rx_desc->wb.middle.length0);
4380
4381                 if (unlikely(!length)) {
4382                         E1000_DBG("%s: Last part of the packet spanning"
4383                                   " multiple descriptors\n", netdev->name);
4384                         dev_kfree_skb_irq(skb);
4385                         goto next_desc;
4386                 }
4387
4388                 /* Good Receive */
4389                 skb_put(skb, length);
4390
4391                 {
4392                 /* this looks ugly, but it seems compiler issues make it
4393                    more efficient than reusing j */
4394                 int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
4395
4396                 /* page alloc/put takes too long and effects small packet
4397                  * throughput, so unsplit small packets and save the alloc/put*/
4398                 if (l1 && (l1 <= copybreak) && ((length + l1) <= adapter->rx_ps_bsize0)) {
4399                         u8 *vaddr;
4400                         /* there is no documentation about how to call
4401                          * kmap_atomic, so we can't hold the mapping
4402                          * very long */
4403                         pci_dma_sync_single_for_cpu(pdev,
4404                                 ps_page_dma->ps_page_dma[0],
4405                                 PAGE_SIZE,
4406                                 PCI_DMA_FROMDEVICE);
4407                         vaddr = kmap_atomic(ps_page->ps_page[0],
4408                                             KM_SKB_DATA_SOFTIRQ);
4409                         memcpy(skb->tail, vaddr, l1);
4410                         kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
4411                         pci_dma_sync_single_for_device(pdev,
4412                                 ps_page_dma->ps_page_dma[0],
4413                                 PAGE_SIZE, PCI_DMA_FROMDEVICE);
4414                         /* remove the CRC */
4415                         l1 -= 4;
4416                         skb_put(skb, l1);
4417                         goto copydone;
4418                 } /* if */
4419                 }
4420
4421                 for (j = 0; j < adapter->rx_ps_pages; j++) {
4422                         if (!(length= le16_to_cpu(rx_desc->wb.upper.length[j])))
4423                                 break;
4424                         pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j],
4425                                         PAGE_SIZE, PCI_DMA_FROMDEVICE);
4426                         ps_page_dma->ps_page_dma[j] = 0;
4427                         skb_fill_page_desc(skb, j, ps_page->ps_page[j], 0,
4428                                            length);
4429                         ps_page->ps_page[j] = NULL;
4430                         skb->len += length;
4431                         skb->data_len += length;
4432                         skb->truesize += length;
4433                 }
4434
4435                 /* strip the ethernet crc, problem is we're using pages now so
4436                  * this whole operation can get a little cpu intensive */
4437                 pskb_trim(skb, skb->len - 4);
4438
4439 copydone:
4440                 total_rx_bytes += skb->len;
4441                 total_rx_packets++;
4442
4443                 e1000_rx_checksum(adapter, staterr,
4444                                   le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
4445                 skb->protocol = eth_type_trans(skb, netdev);
4446
4447                 if (likely(rx_desc->wb.upper.header_status &
4448                            cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP)))
4449                         adapter->rx_hdr_split++;
4450 #ifdef CONFIG_E1000_NAPI
4451                 if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
4452                         vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
4453                                 le16_to_cpu(rx_desc->wb.middle.vlan) &
4454                                 E1000_RXD_SPC_VLAN_MASK);
4455                 } else {
4456                         netif_receive_skb(skb);
4457                 }
4458 #else /* CONFIG_E1000_NAPI */
4459                 if (unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) {
4460                         vlan_hwaccel_rx(skb, adapter->vlgrp,
4461                                 le16_to_cpu(rx_desc->wb.middle.vlan) &
4462                                 E1000_RXD_SPC_VLAN_MASK);
4463                 } else {
4464                         netif_rx(skb);
4465                 }
4466 #endif /* CONFIG_E1000_NAPI */
4467                 netdev->last_rx = jiffies;
4468
4469 next_desc:
4470                 rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
4471                 buffer_info->skb = NULL;
4472
4473                 /* return some buffers to hardware, one at a time is too slow */
4474                 if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
4475                         adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
4476                         cleaned_count = 0;
4477                 }
4478
4479                 /* use prefetched values */
4480                 rx_desc = next_rxd;
4481                 buffer_info = next_buffer;
4482
4483                 staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
4484         }
4485         rx_ring->next_to_clean = i;
4486
4487         cleaned_count = E1000_DESC_UNUSED(rx_ring);
4488         if (cleaned_count)
4489                 adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
4490
4491         adapter->total_rx_packets += total_rx_packets;
4492         adapter->total_rx_bytes += total_rx_bytes;
4493         return cleaned;
4494 }
4495
4496 /**
4497  * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
4498  * @adapter: address of board private structure
4499  **/
4500
4501 static void
4502 e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
4503                        struct e1000_rx_ring *rx_ring,
4504                        int cleaned_count)
4505 {
4506         struct net_device *netdev = adapter->netdev;
4507         struct pci_dev *pdev = adapter->pdev;
4508         struct e1000_rx_desc *rx_desc;
4509         struct e1000_buffer *buffer_info;
4510         struct sk_buff *skb;
4511         unsigned int i;
4512         unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
4513
4514         i = rx_ring->next_to_use;
4515         buffer_info = &rx_ring->buffer_info[i];
4516
4517         while (cleaned_count--) {
4518                 skb = buffer_info->skb;
4519                 if (skb) {
4520                         skb_trim(skb, 0);
4521                         goto map_skb;
4522                 }
4523
4524                 skb = netdev_alloc_skb(netdev, bufsz);
4525                 if (unlikely(!skb)) {
4526                         /* Better luck next round */
4527                         adapter->alloc_rx_buff_failed++;
4528                         break;
4529                 }
4530
4531                 /* Fix for errata 23, can't cross 64kB boundary */
4532                 if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
4533                         struct sk_buff *oldskb = skb;
4534                         DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
4535                                              "at %p\n", bufsz, skb->data);
4536                         /* Try again, without freeing the previous */
4537                         skb = netdev_alloc_skb(netdev, bufsz);
4538                         /* Failed allocation, critical failure */
4539                         if (!skb) {
4540                                 dev_kfree_skb(oldskb);
4541                                 break;
4542                         }
4543
4544                         if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
4545                                 /* give up */
4546                                 dev_kfree_skb(skb);
4547                                 dev_kfree_skb(oldskb);
4548                                 break; /* while !buffer_info->skb */
4549                         }
4550
4551                         /* Use new allocation */
4552                         dev_kfree_skb(oldskb);
4553                 }
4554                 /* Make buffer alignment 2 beyond a 16 byte boundary
4555                  * this will result in a 16 byte aligned IP header after
4556                  * the 14 byte MAC header is removed
4557                  */
4558                 skb_reserve(skb, NET_IP_ALIGN);
4559
4560                 buffer_info->skb = skb;
4561                 buffer_info->length = adapter->rx_buffer_len;
4562 map_skb:
4563                 buffer_info->dma = pci_map_single(pdev,
4564                                                   skb->data,
4565                                                   adapter->rx_buffer_len,
4566                                                   PCI_DMA_FROMDEVICE);
4567
4568                 /* Fix for errata 23, can't cross 64kB boundary */
4569                 if (!e1000_check_64k_bound(adapter,
4570                                         (void *)(unsigned long)buffer_info->dma,
4571                                         adapter->rx_buffer_len)) {
4572                         DPRINTK(RX_ERR, ERR,
4573                                 "dma align check failed: %u bytes at %p\n",
4574                                 adapter->rx_buffer_len,
4575                                 (void *)(unsigned long)buffer_info->dma);
4576                         dev_kfree_skb(skb);
4577                         buffer_info->skb = NULL;
4578
4579                         pci_unmap_single(pdev, buffer_info->dma,
4580                                          adapter->rx_buffer_len,
4581                                          PCI_DMA_FROMDEVICE);
4582
4583                         break; /* while !buffer_info->skb */
4584                 }
4585                 rx_desc = E1000_RX_DESC(*rx_ring, i);
4586                 rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
4587
4588                 if (unlikely(++i == rx_ring->count))
4589                         i = 0;
4590                 buffer_info = &rx_ring->buffer_info[i];
4591         }
4592
4593         if (likely(rx_ring->next_to_use != i)) {
4594                 rx_ring->next_to_use = i;
4595                 if (unlikely(i-- == 0))
4596                         i = (rx_ring->count - 1);
4597
4598                 /* Force memory writes to complete before letting h/w
4599                  * know there are new descriptors to fetch.  (Only
4600                  * applicable for weak-ordered memory model archs,
4601                  * such as IA-64). */
4602                 wmb();
4603                 writel(i, adapter->hw.hw_addr + rx_ring->rdt);
4604         }
4605 }
4606
4607 /**
4608  * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
4609  * @adapter: address of board private structure
4610  **/
4611
4612 static void
4613 e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
4614                           struct e1000_rx_ring *rx_ring,
4615                           int cleaned_count)
4616 {
4617         struct net_device *netdev = adapter->netdev;
4618         struct pci_dev *pdev = adapter->pdev;
4619         union e1000_rx_desc_packet_split *rx_desc;
4620         struct e1000_buffer *buffer_info;
4621         struct e1000_ps_page *ps_page;
4622         struct e1000_ps_page_dma *ps_page_dma;
4623         struct sk_buff *skb;
4624         unsigned int i, j;
4625
4626         i = rx_ring->next_to_use;
4627         buffer_info = &rx_ring->buffer_info[i];
4628         ps_page = &rx_ring->ps_page[i];
4629         ps_page_dma = &rx_ring->ps_page_dma[i];
4630
4631         while (cleaned_count--) {
4632                 rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
4633
4634                 for (j = 0; j < PS_PAGE_BUFFERS; j++) {
4635                         if (j < adapter->rx_ps_pages) {
4636                                 if (likely(!ps_page->ps_page[j])) {
4637                                         ps_page->ps_page[j] =
4638                                                 alloc_page(GFP_ATOMIC);
4639                                         if (unlikely(!ps_page->ps_page[j])) {
4640                                                 adapter->alloc_rx_buff_failed++;
4641                                                 goto no_buffers;
4642                                         }
4643                                         ps_page_dma->ps_page_dma[j] =
4644                                                 pci_map_page(pdev,
4645                                                             ps_page->ps_page[j],
4646                                                             0, PAGE_SIZE,
4647                                                             PCI_DMA_FROMDEVICE);
4648                                 }
4649                                 /* Refresh the desc even if buffer_addrs didn't
4650                                  * change because each write-back erases
4651                                  * this info.
4652                                  */
4653                                 rx_desc->read.buffer_addr[j+1] =
4654                                      cpu_to_le64(ps_page_dma->ps_page_dma[j]);
4655                         } else
4656                                 rx_desc->read.buffer_addr[j+1] = ~0;
4657                 }
4658
4659                 skb = netdev_alloc_skb(netdev,
4660                                        adapter->rx_ps_bsize0 + NET_IP_ALIGN);
4661
4662                 if (unlikely(!skb)) {
4663                         adapter->alloc_rx_buff_failed++;
4664                         break;
4665                 }
4666
4667                 /* Make buffer alignment 2 beyond a 16 byte boundary
4668                  * this will result in a 16 byte aligned IP header after
4669                  * the 14 byte MAC header is removed
4670                  */
4671                 skb_reserve(skb, NET_IP_ALIGN);
4672
4673                 buffer_info->skb = skb;
4674                 buffer_info->length = adapter->rx_ps_bsize0;
4675                 buffer_info->dma = pci_map_single(pdev, skb->data,
4676                                                   adapter->rx_ps_bsize0,
4677                                                   PCI_DMA_FROMDEVICE);
4678
4679                 rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
4680
4681                 if (unlikely(++i == rx_ring->count)) i = 0;
4682                 buffer_info = &rx_ring->buffer_info[i];
4683                 ps_page = &rx_ring->ps_page[i];
4684                 ps_page_dma = &rx_ring->ps_page_dma[i];
4685         }
4686
4687 no_buffers:
4688         if (likely(rx_ring->next_to_use != i)) {
4689                 rx_ring->next_to_use = i;
4690                 if (unlikely(i-- == 0)) i = (rx_ring->count - 1);
4691
4692                 /* Force memory writes to complete before letting h/w
4693                  * know there are new descriptors to fetch.  (Only
4694                  * applicable for weak-ordered memory model archs,
4695                  * such as IA-64). */
4696                 wmb();
4697                 /* Hardware increments by 16 bytes, but packet split
4698                  * descriptors are 32 bytes...so we increment tail
4699                  * twice as much.
4700                  */
4701                 writel(i<<1, adapter->hw.hw_addr + rx_ring->rdt);
4702         }
4703 }
4704
4705 /**
4706  * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
4707  * @adapter:
4708  **/
4709
4710 static void
4711 e1000_smartspeed(struct e1000_adapter *adapter)
4712 {
4713         uint16_t phy_status;
4714         uint16_t phy_ctrl;
4715
4716         if ((adapter->hw.phy_type != e1000_phy_igp) || !adapter->hw.autoneg ||
4717            !(adapter->hw.autoneg_advertised & ADVERTISE_1000_FULL))
4718                 return;
4719
4720         if (adapter->smartspeed == 0) {
4721                 /* If Master/Slave config fault is asserted twice,
4722                  * we assume back-to-back */
4723                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
4724                 if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
4725                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_STATUS, &phy_status);
4726                 if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
4727                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
4728                 if (phy_ctrl & CR_1000T_MS_ENABLE) {
4729                         phy_ctrl &= ~CR_1000T_MS_ENABLE;
4730                         e1000_write_phy_reg(&adapter->hw, PHY_1000T_CTRL,
4731                                             phy_ctrl);
4732                         adapter->smartspeed++;
4733                         if (!e1000_phy_setup_autoneg(&adapter->hw) &&
4734                            !e1000_read_phy_reg(&adapter->hw, PHY_CTRL,
4735                                                &phy_ctrl)) {
4736                                 phy_ctrl |= (MII_CR_AUTO_NEG_EN |
4737                                              MII_CR_RESTART_AUTO_NEG);
4738                                 e1000_write_phy_reg(&adapter->hw, PHY_CTRL,
4739                                                     phy_ctrl);
4740                         }
4741                 }
4742                 return;
4743         } else if (adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
4744                 /* If still no link, perhaps using 2/3 pair cable */
4745                 e1000_read_phy_reg(&adapter->hw, PHY_1000T_CTRL, &phy_ctrl);
4746                 phy_ctrl |= CR_1000T_MS_ENABLE;
4747                 e1000_write_phy_reg(&adapter->hw, PHY_1000T_CTRL, phy_ctrl);
4748                 if (!e1000_phy_setup_autoneg(&adapter->hw) &&
4749                    !e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &phy_ctrl)) {
4750                         phy_ctrl |= (MII_CR_AUTO_NEG_EN |
4751                                      MII_CR_RESTART_AUTO_NEG);
4752                         e1000_write_phy_reg(&adapter->hw, PHY_CTRL, phy_ctrl);
4753                 }
4754         }
4755         /* Restart process after E1000_SMARTSPEED_MAX iterations */
4756         if (adapter->smartspeed++ == E1000_SMARTSPEED_MAX)
4757                 adapter->smartspeed = 0;
4758 }
4759
4760 /**
4761  * e1000_ioctl -
4762  * @netdev:
4763  * @ifreq:
4764  * @cmd:
4765  **/
4766
4767 static int
4768 e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
4769 {
4770         switch (cmd) {
4771         case SIOCGMIIPHY:
4772         case SIOCGMIIREG:
4773         case SIOCSMIIREG:
4774                 return e1000_mii_ioctl(netdev, ifr, cmd);
4775         default:
4776                 return -EOPNOTSUPP;
4777         }
4778 }
4779
4780 /**
4781  * e1000_mii_ioctl -
4782  * @netdev:
4783  * @ifreq:
4784  * @cmd:
4785  **/
4786
4787 static int
4788 e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
4789 {
4790         struct e1000_adapter *adapter = netdev_priv(netdev);
4791         struct mii_ioctl_data *data = if_mii(ifr);
4792         int retval;
4793         uint16_t mii_reg;
4794         uint16_t spddplx;
4795         unsigned long flags;
4796
4797         if (adapter->hw.media_type != e1000_media_type_copper)
4798                 return -EOPNOTSUPP;
4799
4800         switch (cmd) {
4801         case SIOCGMIIPHY:
4802                 data->phy_id = adapter->hw.phy_addr;
4803                 break;
4804         case SIOCGMIIREG:
4805                 if (!capable(CAP_NET_ADMIN))
4806                         return -EPERM;
4807                 spin_lock_irqsave(&adapter->stats_lock, flags);
4808                 if (e1000_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
4809                                    &data->val_out)) {
4810                         spin_unlock_irqrestore(&adapter->stats_lock, flags);
4811                         return -EIO;
4812                 }
4813                 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4814                 break;
4815         case SIOCSMIIREG:
4816                 if (!capable(CAP_NET_ADMIN))
4817                         return -EPERM;
4818                 if (data->reg_num & ~(0x1F))
4819                         return -EFAULT;
4820                 mii_reg = data->val_in;
4821                 spin_lock_irqsave(&adapter->stats_lock, flags);
4822                 if (e1000_write_phy_reg(&adapter->hw, data->reg_num,
4823                                         mii_reg)) {
4824                         spin_unlock_irqrestore(&adapter->stats_lock, flags);
4825                         return -EIO;
4826                 }
4827                 if (adapter->hw.media_type == e1000_media_type_copper) {
4828                         switch (data->reg_num) {
4829                         case PHY_CTRL:
4830                                 if (mii_reg & MII_CR_POWER_DOWN)
4831                                         break;
4832                                 if (mii_reg & MII_CR_AUTO_NEG_EN) {
4833                                         adapter->hw.autoneg = 1;
4834                                         adapter->hw.autoneg_advertised = 0x2F;
4835                                 } else {
4836                                         if (mii_reg & 0x40)
4837                                                 spddplx = SPEED_1000;
4838                                         else if (mii_reg & 0x2000)
4839                                                 spddplx = SPEED_100;
4840                                         else
4841                                                 spddplx = SPEED_10;
4842                                         spddplx += (mii_reg & 0x100)
4843                                                    ? DUPLEX_FULL :
4844                                                    DUPLEX_HALF;
4845                                         retval = e1000_set_spd_dplx(adapter,
4846                                                                     spddplx);
4847                                         if (retval) {
4848                                                 spin_unlock_irqrestore(
4849                                                         &adapter->stats_lock,
4850                                                         flags);
4851                                                 return retval;
4852                                         }
4853                                 }
4854                                 if (netif_running(adapter->netdev))
4855                                         e1000_reinit_locked(adapter);
4856                                 else
4857                                         e1000_reset(adapter);
4858                                 break;
4859                         case M88E1000_PHY_SPEC_CTRL:
4860                         case M88E1000_EXT_PHY_SPEC_CTRL:
4861                                 if (e1000_phy_reset(&adapter->hw)) {
4862                                         spin_unlock_irqrestore(
4863                                                 &adapter->stats_lock, flags);
4864                                         return -EIO;
4865                                 }
4866                                 break;
4867                         }
4868                 } else {
4869                         switch (data->reg_num) {
4870                         case PHY_CTRL:
4871                                 if (mii_reg & MII_CR_POWER_DOWN)
4872                                         break;
4873                                 if (netif_running(adapter->netdev))
4874                                         e1000_reinit_locked(adapter);
4875                                 else
4876                                         e1000_reset(adapter);
4877                                 break;
4878                         }
4879                 }
4880                 spin_unlock_irqrestore(&adapter->stats_lock, flags);
4881                 break;
4882         default:
4883                 return -EOPNOTSUPP;
4884         }
4885         return E1000_SUCCESS;
4886 }
4887
4888 void
4889 e1000_pci_set_mwi(struct e1000_hw *hw)
4890 {
4891         struct e1000_adapter *adapter = hw->back;
4892         int ret_val = pci_set_mwi(adapter->pdev);
4893
4894         if (ret_val)
4895                 DPRINTK(PROBE, ERR, "Error in setting MWI\n");
4896 }
4897
4898 void
4899 e1000_pci_clear_mwi(struct e1000_hw *hw)
4900 {
4901         struct e1000_adapter *adapter = hw->back;
4902
4903         pci_clear_mwi(adapter->pdev);
4904 }
4905
4906 void
4907 e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
4908 {
4909         struct e1000_adapter *adapter = hw->back;
4910
4911         pci_read_config_word(adapter->pdev, reg, value);
4912 }
4913
4914 void
4915 e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
4916 {
4917         struct e1000_adapter *adapter = hw->back;
4918
4919         pci_write_config_word(adapter->pdev, reg, *value);
4920 }
4921
4922 int32_t
4923 e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value)
4924 {
4925     struct e1000_adapter *adapter = hw->back;
4926     uint16_t cap_offset;
4927
4928     cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
4929     if (!cap_offset)
4930         return -E1000_ERR_CONFIG;
4931
4932     pci_read_config_word(adapter->pdev, cap_offset + reg, value);
4933
4934     return E1000_SUCCESS;
4935 }
4936
4937 void
4938 e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value)
4939 {
4940         outl(value, port);
4941 }
4942
4943 static void
4944 e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
4945 {
4946         struct e1000_adapter *adapter = netdev_priv(netdev);
4947         uint32_t ctrl, rctl;
4948
4949         e1000_irq_disable(adapter);
4950         adapter->vlgrp = grp;
4951
4952         if (grp) {
4953                 /* enable VLAN tag insert/strip */
4954                 ctrl = E1000_READ_REG(&adapter->hw, CTRL);
4955                 ctrl |= E1000_CTRL_VME;
4956                 E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
4957
4958                 if (adapter->hw.mac_type != e1000_ich8lan) {
4959                         /* enable VLAN receive filtering */
4960                         rctl = E1000_READ_REG(&adapter->hw, RCTL);
4961                         rctl |= E1000_RCTL_VFE;
4962                         rctl &= ~E1000_RCTL_CFIEN;
4963                         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
4964                         e1000_update_mng_vlan(adapter);
4965                 }
4966         } else {
4967                 /* disable VLAN tag insert/strip */
4968                 ctrl = E1000_READ_REG(&adapter->hw, CTRL);
4969                 ctrl &= ~E1000_CTRL_VME;
4970                 E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
4971
4972                 if (adapter->hw.mac_type != e1000_ich8lan) {
4973                         /* disable VLAN filtering */
4974                         rctl = E1000_READ_REG(&adapter->hw, RCTL);
4975                         rctl &= ~E1000_RCTL_VFE;
4976                         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
4977                         if (adapter->mng_vlan_id !=
4978                             (uint16_t)E1000_MNG_VLAN_NONE) {
4979                                 e1000_vlan_rx_kill_vid(netdev,
4980                                                        adapter->mng_vlan_id);
4981                                 adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
4982                         }
4983                 }
4984         }
4985
4986         e1000_irq_enable(adapter);
4987 }
4988
4989 static void
4990 e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
4991 {
4992         struct e1000_adapter *adapter = netdev_priv(netdev);
4993         uint32_t vfta, index;
4994
4995         if ((adapter->hw.mng_cookie.status &
4996              E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
4997             (vid == adapter->mng_vlan_id))
4998                 return;
4999         /* add VID to filter table */
5000         index = (vid >> 5) & 0x7F;
5001         vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
5002         vfta |= (1 << (vid & 0x1F));
5003         e1000_write_vfta(&adapter->hw, index, vfta);
5004 }
5005
5006 static void
5007 e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid)
5008 {
5009         struct e1000_adapter *adapter = netdev_priv(netdev);
5010         uint32_t vfta, index;
5011
5012         e1000_irq_disable(adapter);
5013
5014         if (adapter->vlgrp)
5015                 adapter->vlgrp->vlan_devices[vid] = NULL;
5016
5017         e1000_irq_enable(adapter);
5018
5019         if ((adapter->hw.mng_cookie.status &
5020              E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
5021             (vid == adapter->mng_vlan_id)) {
5022                 /* release control to f/w */
5023                 e1000_release_hw_control(adapter);
5024                 return;
5025         }
5026
5027         /* remove VID from filter table */
5028         index = (vid >> 5) & 0x7F;
5029         vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index);
5030         vfta &= ~(1 << (vid & 0x1F));
5031         e1000_write_vfta(&adapter->hw, index, vfta);
5032 }
5033
5034 static void
5035 e1000_restore_vlan(struct e1000_adapter *adapter)
5036 {
5037         e1000_vlan_rx_register(adapter->netdev, adapter->vlgrp);
5038
5039         if (adapter->vlgrp) {
5040                 uint16_t vid;
5041                 for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
5042                         if (!adapter->vlgrp->vlan_devices[vid])
5043                                 continue;
5044                         e1000_vlan_rx_add_vid(adapter->netdev, vid);
5045                 }
5046         }
5047 }
5048
5049 int
5050 e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx)
5051 {
5052         adapter->hw.autoneg = 0;
5053
5054         /* Fiber NICs only allow 1000 gbps Full duplex */
5055         if ((adapter->hw.media_type == e1000_media_type_fiber) &&
5056                 spddplx != (SPEED_1000 + DUPLEX_FULL)) {
5057                 DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
5058                 return -EINVAL;
5059         }
5060
5061         switch (spddplx) {
5062         case SPEED_10 + DUPLEX_HALF:
5063                 adapter->hw.forced_speed_duplex = e1000_10_half;
5064                 break;
5065         case SPEED_10 + DUPLEX_FULL:
5066                 adapter->hw.forced_speed_duplex = e1000_10_full;
5067                 break;
5068         case SPEED_100 + DUPLEX_HALF:
5069                 adapter->hw.forced_speed_duplex = e1000_100_half;
5070                 break;
5071         case SPEED_100 + DUPLEX_FULL:
5072                 adapter->hw.forced_speed_duplex = e1000_100_full;
5073                 break;
5074         case SPEED_1000 + DUPLEX_FULL:
5075                 adapter->hw.autoneg = 1;
5076                 adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
5077                 break;
5078         case SPEED_1000 + DUPLEX_HALF: /* not supported */
5079         default:
5080                 DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n");
5081                 return -EINVAL;
5082         }
5083         return 0;
5084 }
5085
5086 #ifdef CONFIG_PM
5087 /* Save/restore 16 or 64 dwords of PCI config space depending on which
5088  * bus we're on (PCI(X) vs. PCI-E)
5089  */
5090 #define PCIE_CONFIG_SPACE_LEN 256
5091 #define PCI_CONFIG_SPACE_LEN 64
5092 static int
5093 e1000_pci_save_state(struct e1000_adapter *adapter)
5094 {
5095         struct pci_dev *dev = adapter->pdev;
5096         int size;
5097         int i;
5098
5099         if (adapter->hw.mac_type >= e1000_82571)
5100                 size = PCIE_CONFIG_SPACE_LEN;
5101         else
5102                 size = PCI_CONFIG_SPACE_LEN;
5103
5104         WARN_ON(adapter->config_space != NULL);
5105
5106         adapter->config_space = kmalloc(size, GFP_KERNEL);
5107         if (!adapter->config_space) {
5108                 DPRINTK(PROBE, ERR, "unable to allocate %d bytes\n", size);
5109                 return -ENOMEM;
5110         }
5111         for (i = 0; i < (size / 4); i++)
5112                 pci_read_config_dword(dev, i * 4, &adapter->config_space[i]);
5113         return 0;
5114 }
5115
5116 static void
5117 e1000_pci_restore_state(struct e1000_adapter *adapter)
5118 {
5119         struct pci_dev *dev = adapter->pdev;
5120         int size;
5121         int i;
5122
5123         if (adapter->config_space == NULL)
5124                 return;
5125
5126         if (adapter->hw.mac_type >= e1000_82571)
5127                 size = PCIE_CONFIG_SPACE_LEN;
5128         else
5129                 size = PCI_CONFIG_SPACE_LEN;
5130         for (i = 0; i < (size / 4); i++)
5131                 pci_write_config_dword(dev, i * 4, adapter->config_space[i]);
5132         kfree(adapter->config_space);
5133         adapter->config_space = NULL;
5134         return;
5135 }
5136 #endif /* CONFIG_PM */
5137
5138 static int
5139 e1000_suspend(struct pci_dev *pdev, pm_message_t state)
5140 {
5141         struct net_device *netdev = pci_get_drvdata(pdev);
5142         struct e1000_adapter *adapter = netdev_priv(netdev);
5143         uint32_t ctrl, ctrl_ext, rctl, status;
5144         uint32_t wufc = adapter->wol;
5145 #ifdef CONFIG_PM
5146         int retval = 0;
5147 #endif
5148
5149         netif_device_detach(netdev);
5150
5151         if (netif_running(netdev)) {
5152                 WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
5153                 e1000_down(adapter);
5154         }
5155
5156 #ifdef CONFIG_PM
5157         /* Implement our own version of pci_save_state(pdev) because pci-
5158          * express adapters have 256-byte config spaces. */
5159         retval = e1000_pci_save_state(adapter);
5160         if (retval)
5161                 return retval;
5162 #endif
5163
5164         status = E1000_READ_REG(&adapter->hw, STATUS);
5165         if (status & E1000_STATUS_LU)
5166                 wufc &= ~E1000_WUFC_LNKC;
5167
5168         if (wufc) {
5169                 e1000_setup_rctl(adapter);
5170                 e1000_set_multi(netdev);
5171
5172                 /* turn on all-multi mode if wake on multicast is enabled */
5173                 if (wufc & E1000_WUFC_MC) {
5174                         rctl = E1000_READ_REG(&adapter->hw, RCTL);
5175                         rctl |= E1000_RCTL_MPE;
5176                         E1000_WRITE_REG(&adapter->hw, RCTL, rctl);
5177                 }
5178
5179                 if (adapter->hw.mac_type >= e1000_82540) {
5180                         ctrl = E1000_READ_REG(&adapter->hw, CTRL);
5181                         /* advertise wake from D3Cold */
5182                         #define E1000_CTRL_ADVD3WUC 0x00100000
5183                         /* phy power management enable */
5184                         #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
5185                         ctrl |= E1000_CTRL_ADVD3WUC |
5186                                 E1000_CTRL_EN_PHY_PWR_MGMT;
5187                         E1000_WRITE_REG(&adapter->hw, CTRL, ctrl);
5188                 }
5189
5190                 if (adapter->hw.media_type == e1000_media_type_fiber ||
5191                    adapter->hw.media_type == e1000_media_type_internal_serdes) {
5192                         /* keep the laser running in D3 */
5193                         ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT);
5194                         ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
5195                         E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext);
5196                 }
5197
5198                 /* Allow time for pending master requests to run */
5199                 e1000_disable_pciex_master(&adapter->hw);
5200
5201                 E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN);
5202                 E1000_WRITE_REG(&adapter->hw, WUFC, wufc);
5203                 pci_enable_wake(pdev, PCI_D3hot, 1);
5204                 pci_enable_wake(pdev, PCI_D3cold, 1);
5205         } else {
5206                 E1000_WRITE_REG(&adapter->hw, WUC, 0);
5207                 E1000_WRITE_REG(&adapter->hw, WUFC, 0);
5208                 pci_enable_wake(pdev, PCI_D3hot, 0);
5209                 pci_enable_wake(pdev, PCI_D3cold, 0);
5210         }
5211
5212         e1000_release_manageability(adapter);
5213
5214         /* make sure adapter isn't asleep if manageability is enabled */
5215         if (adapter->en_mng_pt) {
5216                 pci_enable_wake(pdev, PCI_D3hot, 1);
5217                 pci_enable_wake(pdev, PCI_D3cold, 1);
5218         }
5219
5220         if (adapter->hw.phy_type == e1000_phy_igp_3)
5221                 e1000_phy_powerdown_workaround(&adapter->hw);
5222
5223         if (netif_running(netdev))
5224                 e1000_free_irq(adapter);
5225
5226         /* Release control of h/w to f/w.  If f/w is AMT enabled, this
5227          * would have already happened in close and is redundant. */
5228         e1000_release_hw_control(adapter);
5229
5230         pci_disable_device(pdev);
5231
5232         pci_set_power_state(pdev, pci_choose_state(pdev, state));
5233
5234         return 0;
5235 }
5236
5237 #ifdef CONFIG_PM
5238 static int
5239 e1000_resume(struct pci_dev *pdev)
5240 {
5241         struct net_device *netdev = pci_get_drvdata(pdev);
5242         struct e1000_adapter *adapter = netdev_priv(netdev);
5243         uint32_t err;
5244
5245         pci_set_power_state(pdev, PCI_D0);
5246         e1000_pci_restore_state(adapter);
5247         if ((err = pci_enable_device(pdev))) {
5248                 printk(KERN_ERR "e1000: Cannot enable PCI device from suspend\n");
5249                 return err;
5250         }
5251         pci_set_master(pdev);
5252
5253         pci_enable_wake(pdev, PCI_D3hot, 0);
5254         pci_enable_wake(pdev, PCI_D3cold, 0);
5255
5256         if (netif_running(netdev) && (err = e1000_request_irq(adapter)))
5257                 return err;
5258
5259         e1000_power_up_phy(adapter);
5260         e1000_reset(adapter);
5261         E1000_WRITE_REG(&adapter->hw, WUS, ~0);
5262
5263         e1000_init_manageability(adapter);
5264
5265         if (netif_running(netdev))
5266                 e1000_up(adapter);
5267
5268         netif_device_attach(netdev);
5269
5270         /* If the controller is 82573 and f/w is AMT, do not set
5271          * DRV_LOAD until the interface is up.  For all other cases,
5272          * let the f/w know that the h/w is now under the control
5273          * of the driver. */
5274         if (adapter->hw.mac_type != e1000_82573 ||
5275             !e1000_check_mng_mode(&adapter->hw))
5276                 e1000_get_hw_control(adapter);
5277
5278         return 0;
5279 }
5280 #endif
5281
5282 static void e1000_shutdown(struct pci_dev *pdev)
5283 {
5284         e1000_suspend(pdev, PMSG_SUSPEND);
5285 }
5286
5287 #ifdef CONFIG_NET_POLL_CONTROLLER
5288 /*
5289  * Polling 'interrupt' - used by things like netconsole to send skbs
5290  * without having to re-enable interrupts. It's not called while
5291  * the interrupt routine is executing.
5292  */
5293 static void
5294 e1000_netpoll(struct net_device *netdev)
5295 {
5296         struct e1000_adapter *adapter = netdev_priv(netdev);
5297
5298         disable_irq(adapter->pdev->irq);
5299         e1000_intr(adapter->pdev->irq, netdev);
5300         e1000_clean_tx_irq(adapter, adapter->tx_ring);
5301 #ifndef CONFIG_E1000_NAPI
5302         adapter->clean_rx(adapter, adapter->rx_ring);
5303 #endif
5304         enable_irq(adapter->pdev->irq);
5305 }
5306 #endif
5307
5308 /**
5309  * e1000_io_error_detected - called when PCI error is detected
5310  * @pdev: Pointer to PCI device
5311  * @state: The current pci conneection state
5312  *
5313  * This function is called after a PCI bus error affecting
5314  * this device has been detected.
5315  */
5316 static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
5317 {
5318         struct net_device *netdev = pci_get_drvdata(pdev);
5319         struct e1000_adapter *adapter = netdev->priv;
5320
5321         netif_device_detach(netdev);
5322
5323         if (netif_running(netdev))
5324                 e1000_down(adapter);
5325         pci_disable_device(pdev);
5326
5327         /* Request a slot slot reset. */
5328         return PCI_ERS_RESULT_NEED_RESET;
5329 }
5330
5331 /**
5332  * e1000_io_slot_reset - called after the pci bus has been reset.
5333  * @pdev: Pointer to PCI device
5334  *
5335  * Restart the card from scratch, as if from a cold-boot. Implementation
5336  * resembles the first-half of the e1000_resume routine.
5337  */
5338 static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
5339 {
5340         struct net_device *netdev = pci_get_drvdata(pdev);
5341         struct e1000_adapter *adapter = netdev->priv;
5342
5343         if (pci_enable_device(pdev)) {
5344                 printk(KERN_ERR "e1000: Cannot re-enable PCI device after reset.\n");
5345                 return PCI_ERS_RESULT_DISCONNECT;
5346         }
5347         pci_set_master(pdev);
5348
5349         pci_enable_wake(pdev, PCI_D3hot, 0);
5350         pci_enable_wake(pdev, PCI_D3cold, 0);
5351
5352         e1000_reset(adapter);
5353         E1000_WRITE_REG(&adapter->hw, WUS, ~0);
5354
5355         return PCI_ERS_RESULT_RECOVERED;
5356 }
5357
5358 /**
5359  * e1000_io_resume - called when traffic can start flowing again.
5360  * @pdev: Pointer to PCI device
5361  *
5362  * This callback is called when the error recovery driver tells us that
5363  * its OK to resume normal operation. Implementation resembles the
5364  * second-half of the e1000_resume routine.
5365  */
5366 static void e1000_io_resume(struct pci_dev *pdev)
5367 {
5368         struct net_device *netdev = pci_get_drvdata(pdev);
5369         struct e1000_adapter *adapter = netdev->priv;
5370
5371         e1000_init_manageability(adapter);
5372
5373         if (netif_running(netdev)) {
5374                 if (e1000_up(adapter)) {
5375                         printk("e1000: can't bring device back up after reset\n");
5376                         return;
5377                 }
5378         }
5379
5380         netif_device_attach(netdev);
5381
5382         /* If the controller is 82573 and f/w is AMT, do not set
5383          * DRV_LOAD until the interface is up.  For all other cases,
5384          * let the f/w know that the h/w is now under the control
5385          * of the driver. */
5386         if (adapter->hw.mac_type != e1000_82573 ||
5387             !e1000_check_mng_mode(&adapter->hw))
5388                 e1000_get_hw_control(adapter);
5389
5390 }
5391
5392 /* e1000_main.c */