drivers/mtd/onenand/onenand_base.c

   1 /*
   2  *  linux/drivers/mtd/onenand/onenand_base.c
   3  *
   4  *  Copyright © 2005-2009 Samsung Electronics
   5  *  Copyright © 2007 Nokia Corporation
   6  *
   7  *  Kyungmin Park <kyungmin.park@samsung.com>
   8  *
   9  *  Credits:
  10  *      Adrian Hunter <ext-adrian.hunter@nokia.com>:
  11  *      auto-placement support, read-while load support, various fixes
  12  *
  13  *      Vishak G <vishak.g at samsung.com>, Rohit Hagargundgi <h.rohit at samsung.com>
  14  *      Flex-OneNAND support
  15  *      Amul Kumar Saha <amul.saha at samsung.com>
  16  *      OTP support
  17  *
  18  * This program is free software; you can redistribute it and/or modify
  19  * it under the terms of the GNU General Public License version 2 as
  20  * published by the Free Software Foundation.
  21  */
  22
  23 #include <linux/kernel.h>
  24 #include <linux/module.h>
  25 #include <linux/moduleparam.h>
  26 #include <linux/slab.h>
  27 #include <linux/init.h>
  28 #include <linux/sched.h>
  29 #include <linux/delay.h>
  30 #include <linux/interrupt.h>
  31 #include <linux/jiffies.h>
  32 #include <linux/mtd/mtd.h>
  33 #include <linux/mtd/onenand.h>
  34 #include <linux/mtd/partitions.h>
  35
  36 #include <asm/io.h>
  37
  38 /*
  39  * Multiblock erase if number of blocks to erase is 2 or more.
  40  * Maximum number of blocks for simultaneous erase is 64.
  41  */
  42 #define MB_ERASE_MIN_BLK_COUNT 2
  43 #define MB_ERASE_MAX_BLK_COUNT 64
  44
  45 /* Default Flex-OneNAND boundary and lock respectively */
  46 static int flex_bdry[MAX_DIES * 2] = { -1, 0, -1, 0 };
  47
  48 module_param_array(flex_bdry, int, NULL, 0400);
  49 MODULE_PARM_DESC(flex_bdry,     "SLC Boundary information for Flex-OneNAND"
  50                                 "Syntax:flex_bdry=DIE_BDRY,LOCK,..."
  51                                 "DIE_BDRY: SLC boundary of the die"
  52                                 "LOCK: Locking information for SLC boundary"
  53                                 "    : 0->Set boundary in unlocked status"
  54                                 "    : 1->Set boundary in locked status");
  55
  56 /* Default OneNAND/Flex-OneNAND OTP options*/
  57 static int otp;
  58
  59 module_param(otp, int, 0400);
  60 MODULE_PARM_DESC(otp,   "Corresponding behaviour of OneNAND in OTP"
  61                         "Syntax : otp=LOCK_TYPE"
  62                         "LOCK_TYPE : Keys issued, for specific OTP Lock type"
  63                         "          : 0 -> Default (No Blocks Locked)"
  64                         "          : 1 -> OTP Block lock"
  65                         "          : 2 -> 1st Block lock"
  66                         "          : 3 -> BOTH OTP Block and 1st Block lock");
  67
  68 /**
  69  *  onenand_oob_128 - oob info for Flex-Onenand with 4KB page
  70  *  For now, we expose only 64 out of 80 ecc bytes
  71  */
  72 static struct nand_ecclayout onenand_oob_128 = {
  73         .eccbytes       = 64,
  74         .eccpos         = {
  75                 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
  76                 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
  77                 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
  78                 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
  79                 70, 71, 72, 73, 74, 75, 76, 77, 78, 79,
  80                 86, 87, 88, 89, 90, 91, 92, 93, 94, 95,
  81                 102, 103, 104, 105
  82                 },
  83         .oobfree        = {
  84                 {2, 4}, {18, 4}, {34, 4}, {50, 4},
  85                 {66, 4}, {82, 4}, {98, 4}, {114, 4}
  86         }
  87 };
  88
  89 /**
  90  * onenand_oob_64 - oob info for large (2KB) page
  91  */
  92 static struct nand_ecclayout onenand_oob_64 = {
  93         .eccbytes       = 20,
  94         .eccpos         = {
  95                 8, 9, 10, 11, 12,
  96                 24, 25, 26, 27, 28,
  97                 40, 41, 42, 43, 44,
  98                 56, 57, 58, 59, 60,
  99                 },
 100         .oobfree        = {
 101                 {2, 3}, {14, 2}, {18, 3}, {30, 2},
 102                 {34, 3}, {46, 2}, {50, 3}, {62, 2}
 103         }
 104 };
 105
 106 /**
 107  * onenand_oob_32 - oob info for middle (1KB) page
 108  */
 109 static struct nand_ecclayout onenand_oob_32 = {
 110         .eccbytes       = 10,
 111         .eccpos         = {
 112                 8, 9, 10, 11, 12,
 113                 24, 25, 26, 27, 28,
 114                 },
 115         .oobfree        = { {2, 3}, {14, 2}, {18, 3}, {30, 2} }
 116 };
 117
 118 static const unsigned char ffchars[] = {
 119         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 120         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 16 */
 121         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 122         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 32 */
 123         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 124         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 48 */
 125         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 126         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 64 */
 127         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 128         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 80 */
 129         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 130         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 96 */
 131         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 132         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 112 */
 133         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 134         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 128 */
 135 };
 136
 137 /**
 138  * onenand_readw - [OneNAND Interface] Read OneNAND register
 139  * @param addr          address to read
 140  *
 141  * Read OneNAND register
 142  */
 143 static unsigned short onenand_readw(void __iomem *addr)
 144 {
 145         return readw(addr);
 146 }
 147
 148 /**
 149  * onenand_writew - [OneNAND Interface] Write OneNAND register with value
 150  * @param value         value to write
 151  * @param addr          address to write
 152  *
 153  * Write OneNAND register with value
 154  */
 155 static void onenand_writew(unsigned short value, void __iomem *addr)
 156 {
 157         writew(value, addr);
 158 }
 159
 160 /**
 161  * onenand_block_address - [DEFAULT] Get block address
 162  * @param this          onenand chip data structure
 163  * @param block         the block
 164  * @return              translated block address if DDP, otherwise same
 165  *
 166  * Setup Start Address 1 Register (F100h)
 167  */
 168 static int onenand_block_address(struct onenand_chip *this, int block)
 169 {
 170         /* Device Flash Core select, NAND Flash Block Address */
 171         if (block & this->density_mask)
 172                 return ONENAND_DDP_CHIP1 | (block ^ this->density_mask);
 173
 174         return block;
 175 }
 176
 177 /**
 178  * onenand_bufferram_address - [DEFAULT] Get bufferram address
 179  * @param this          onenand chip data structure
 180  * @param block         the block
 181  * @return              set DBS value if DDP, otherwise 0
 182  *
 183  * Setup Start Address 2 Register (F101h) for DDP
 184  */
 185 static int onenand_bufferram_address(struct onenand_chip *this, int block)
 186 {
 187         /* Device BufferRAM Select */
 188         if (block & this->density_mask)
 189                 return ONENAND_DDP_CHIP1;
 190
 191         return ONENAND_DDP_CHIP0;
 192 }
 193
 194 /**
 195  * onenand_page_address - [DEFAULT] Get page address
 196  * @param page          the page address
 197  * @param sector        the sector address
 198  * @return              combined page and sector address
 199  *
 200  * Setup Start Address 8 Register (F107h)
 201  */
 202 static int onenand_page_address(int page, int sector)
 203 {
 204         /* Flash Page Address, Flash Sector Address */
 205         int fpa, fsa;
 206
 207         fpa = page & ONENAND_FPA_MASK;
 208         fsa = sector & ONENAND_FSA_MASK;
 209
 210         return ((fpa << ONENAND_FPA_SHIFT) | fsa);
 211 }
 212
 213 /**
 214  * onenand_buffer_address - [DEFAULT] Get buffer address
 215  * @param dataram1      DataRAM index
 216  * @param sectors       the sector address
 217  * @param count         the number of sectors
 218  * @return              the start buffer value
 219  *
 220  * Setup Start Buffer Register (F200h)
 221  */
 222 static int onenand_buffer_address(int dataram1, int sectors, int count)
 223 {
 224         int bsa, bsc;
 225
 226         /* BufferRAM Sector Address */
 227         bsa = sectors & ONENAND_BSA_MASK;
 228
 229         if (dataram1)
 230                 bsa |= ONENAND_BSA_DATARAM1;    /* DataRAM1 */
 231         else
 232                 bsa |= ONENAND_BSA_DATARAM0;    /* DataRAM0 */
 233
 234         /* BufferRAM Sector Count */
 235         bsc = count & ONENAND_BSC_MASK;
 236
 237         return ((bsa << ONENAND_BSA_SHIFT) | bsc);
 238 }
 239
 240 /**
 241  * flexonenand_block- For given address return block number
 242  * @param this         - OneNAND device structure
 243  * @param addr          - Address for which block number is needed
 244  */
 245 static unsigned flexonenand_block(struct onenand_chip *this, loff_t addr)
 246 {
 247         unsigned boundary, blk, die = 0;
 248
 249         if (ONENAND_IS_DDP(this) && addr >= this->diesize[0]) {
 250                 die = 1;
 251                 addr -= this->diesize[0];
 252         }
 253
 254         boundary = this->boundary[die];
 255
 256         blk = addr >> (this->erase_shift - 1);
 257         if (blk > boundary)
 258                 blk = (blk + boundary + 1) >> 1;
 259
 260         blk += die ? this->density_mask : 0;
 261         return blk;
 262 }
 263
 264 inline unsigned onenand_block(struct onenand_chip *this, loff_t addr)
 265 {
 266         if (!FLEXONENAND(this))
 267                 return addr >> this->erase_shift;
 268         return flexonenand_block(this, addr);
 269 }
 270
 271 /**
 272  * flexonenand_addr - Return address of the block
 273  * @this:               OneNAND device structure
 274  * @block:              Block number on Flex-OneNAND
 275  *
 276  * Return address of the block
 277  */
 278 static loff_t flexonenand_addr(struct onenand_chip *this, int block)
 279 {
 280         loff_t ofs = 0;
 281         int die = 0, boundary;
 282
 283         if (ONENAND_IS_DDP(this) && block >= this->density_mask) {
 284                 block -= this->density_mask;
 285                 die = 1;
 286                 ofs = this->diesize[0];
 287         }
 288
 289         boundary = this->boundary[die];
 290         ofs += (loff_t)block << (this->erase_shift - 1);
 291         if (block > (boundary + 1))
 292                 ofs += (loff_t)(block - boundary - 1) << (this->erase_shift - 1);
 293         return ofs;
 294 }
 295
 296 loff_t onenand_addr(struct onenand_chip *this, int block)
 297 {
 298         if (!FLEXONENAND(this))
 299                 return (loff_t)block << this->erase_shift;
 300         return flexonenand_addr(this, block);
 301 }
 302 EXPORT_SYMBOL(onenand_addr);
 303
 304 /**
 305  * onenand_get_density - [DEFAULT] Get OneNAND density
 306  * @param dev_id        OneNAND device ID
 307  *
 308  * Get OneNAND density from device ID
 309  */
 310 static inline int onenand_get_density(int dev_id)
 311 {
 312         int density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
 313         return (density & ONENAND_DEVICE_DENSITY_MASK);
 314 }
 315
 316 /**
 317  * flexonenand_region - [Flex-OneNAND] Return erase region of addr
 318  * @param mtd           MTD device structure
 319  * @param addr          address whose erase region needs to be identified
 320  */
 321 int flexonenand_region(struct mtd_info *mtd, loff_t addr)
 322 {
 323         int i;
 324
 325         for (i = 0; i < mtd->numeraseregions; i++)
 326                 if (addr < mtd->eraseregions[i].offset)
 327                         break;
 328         return i - 1;
 329 }
 330 EXPORT_SYMBOL(flexonenand_region);
 331
 332 /**
 333  * onenand_command - [DEFAULT] Send command to OneNAND device
 334  * @param mtd           MTD device structure
 335  * @param cmd           the command to be sent
 336  * @param addr          offset to read from or write to
 337  * @param len           number of bytes to read or write
 338  *
 339  * Send command to OneNAND device. This function is used for middle/large page
 340  * devices (1KB/2KB Bytes per page)
 341  */
 342 static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t len)
 343 {
 344         struct onenand_chip *this = mtd->priv;
 345         int value, block, page;
 346
 347         /* Address translation */
 348         switch (cmd) {
 349         case ONENAND_CMD_UNLOCK:
 350         case ONENAND_CMD_LOCK:
 351         case ONENAND_CMD_LOCK_TIGHT:
 352         case ONENAND_CMD_UNLOCK_ALL:
 353                 block = -1;
 354                 page = -1;
 355                 break;
 356
 357         case FLEXONENAND_CMD_PI_ACCESS:
 358                 /* addr contains die index */
 359                 block = addr * this->density_mask;
 360                 page = -1;
 361                 break;
 362
 363         case ONENAND_CMD_ERASE:
 364         case ONENAND_CMD_MULTIBLOCK_ERASE:
 365         case ONENAND_CMD_ERASE_VERIFY:
 366         case ONENAND_CMD_BUFFERRAM:
 367         case ONENAND_CMD_OTP_ACCESS:
 368                 block = onenand_block(this, addr);
 369                 page = -1;
 370                 break;
 371
 372         case FLEXONENAND_CMD_READ_PI:
 373                 cmd = ONENAND_CMD_READ;
 374                 block = addr * this->density_mask;
 375                 page = 0;
 376                 break;
 377
 378         default:
 379                 block = onenand_block(this, addr);
 380                 page = (int) (addr - onenand_addr(this, block)) >> this->page_shift;
 381
 382                 if (ONENAND_IS_2PLANE(this)) {
 383                         /* Make the even block number */
 384                         block &= ~1;
 385                         /* Is it the odd plane? */
 386                         if (addr & this->writesize)
 387                                 block++;
 388                         page >>= 1;
 389                 }
 390                 page &= this->page_mask;
 391                 break;
 392         }
 393
 394         /* NOTE: The setting order of the registers is very important! */
 395         if (cmd == ONENAND_CMD_BUFFERRAM) {
 396                 /* Select DataRAM for DDP */
 397                 value = onenand_bufferram_address(this, block);
 398                 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
 399
 400                 if (ONENAND_IS_MLC(this) || ONENAND_IS_2PLANE(this) ||
 401                     ONENAND_IS_4KB_PAGE(this))
 402                         /* It is always BufferRAM0 */
 403                         ONENAND_SET_BUFFERRAM0(this);
 404                 else
 405                         /* Switch to the next data buffer */
 406                         ONENAND_SET_NEXT_BUFFERRAM(this);
 407
 408                 return 0;
 409         }
 410
 411         if (block != -1) {
 412                 /* Write 'DFS, FBA' of Flash */
 413                 value = onenand_block_address(this, block);
 414                 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
 415
 416                 /* Select DataRAM for DDP */
 417                 value = onenand_bufferram_address(this, block);
 418                 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
 419         }
 420
 421         if (page != -1) {
 422                 /* Now we use page size operation */
 423                 int sectors = 0, count = 0;
 424                 int dataram;
 425
 426                 switch (cmd) {
 427                 case FLEXONENAND_CMD_RECOVER_LSB:
 428                 case ONENAND_CMD_READ:
 429                 case ONENAND_CMD_READOOB:
 430                         if (ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this))
 431                                 /* It is always BufferRAM0 */
 432                                 dataram = ONENAND_SET_BUFFERRAM0(this);
 433                         else
 434                                 dataram = ONENAND_SET_NEXT_BUFFERRAM(this);
 435                         break;
 436
 437                 default:
 438                         if (ONENAND_IS_2PLANE(this) && cmd == ONENAND_CMD_PROG)
 439                                 cmd = ONENAND_CMD_2X_PROG;
 440                         dataram = ONENAND_CURRENT_BUFFERRAM(this);
 441                         break;
 442                 }
 443
 444                 /* Write 'FPA, FSA' of Flash */
 445                 value = onenand_page_address(page, sectors);
 446                 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS8);
 447
 448                 /* Write 'BSA, BSC' of DataRAM */
 449                 value = onenand_buffer_address(dataram, sectors, count);
 450                 this->write_word(value, this->base + ONENAND_REG_START_BUFFER);
 451         }
 452
 453         /* Interrupt clear */
 454         this->write_word(ONENAND_INT_CLEAR, this->base + ONENAND_REG_INTERRUPT);
 455
 456         /* Write command */
 457         this->write_word(cmd, this->base + ONENAND_REG_COMMAND);
 458
 459         return 0;
 460 }
 461
 462 /**
 463  * onenand_read_ecc - return ecc status
 464  * @param this          onenand chip structure
 465  */
 466 static inline int onenand_read_ecc(struct onenand_chip *this)
 467 {
 468         int ecc, i, result = 0;
 469
 470         if (!FLEXONENAND(this) && !ONENAND_IS_4KB_PAGE(this))
 471                 return this->read_word(this->base + ONENAND_REG_ECC_STATUS);
 472
 473         for (i = 0; i < 4; i++) {
 474                 ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS + i*2);
 475                 if (likely(!ecc))
 476                         continue;
 477                 if (ecc & FLEXONENAND_UNCORRECTABLE_ERROR)
 478                         return ONENAND_ECC_2BIT_ALL;
 479                 else
 480                         result = ONENAND_ECC_1BIT_ALL;
 481         }
 482
 483         return result;
 484 }
 485
 486 /**
 487  * onenand_wait - [DEFAULT] wait until the command is done
 488  * @param mtd           MTD device structure
 489  * @param state         state to select the max. timeout value
 490  *
 491  * Wait for command done. This applies to all OneNAND command
 492  * Read can take up to 30us, erase up to 2ms and program up to 350us
 493  * according to general OneNAND specs
 494  */
 495 static int onenand_wait(struct mtd_info *mtd, int state)
 496 {
 497         struct onenand_chip * this = mtd->priv;
 498         unsigned long timeout;
 499         unsigned int flags = ONENAND_INT_MASTER;
 500         unsigned int interrupt = 0;
 501         unsigned int ctrl;
 502
 503         /* The 20 msec is enough */
 504         timeout = jiffies + msecs_to_jiffies(20);
 505         while (time_before(jiffies, timeout)) {
 506                 interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
 507
 508                 if (interrupt & flags)
 509                         break;
 510
 511                 if (state != FL_READING && state != FL_PREPARING_ERASE)
 512                         cond_resched();
 513         }
 514         /* To get correct interrupt status in timeout case */
 515         interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
 516
 517         ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
 518
 519         /*
 520          * In the Spec. it checks the controller status first
 521          * However if you get the correct information in case of
 522          * power off recovery (POR) test, it should read ECC status first
 523          */
 524         if (interrupt & ONENAND_INT_READ) {
 525                 int ecc = onenand_read_ecc(this);
 526                 if (ecc) {
 527                         if (ecc & ONENAND_ECC_2BIT_ALL) {
 528                                 printk(KERN_ERR "%s: ECC error = 0x%04x\n",
 529                                         __func__, ecc);
 530                                 mtd->ecc_stats.failed++;
 531                                 return -EBADMSG;
 532                         } else if (ecc & ONENAND_ECC_1BIT_ALL) {
 533                                 printk(KERN_DEBUG "%s: correctable ECC error = 0x%04x\n",
 534                                         __func__, ecc);
 535                                 mtd->ecc_stats.corrected++;
 536                         }
 537                 }
 538         } else if (state == FL_READING) {
 539                 printk(KERN_ERR "%s: read timeout! ctrl=0x%04x intr=0x%04x\n",
 540                         __func__, ctrl, interrupt);
 541                 return -EIO;
 542         }
 543
 544         if (state == FL_PREPARING_ERASE && !(interrupt & ONENAND_INT_ERASE)) {
 545                 printk(KERN_ERR "%s: mb erase timeout! ctrl=0x%04x intr=0x%04x\n",
 546                        __func__, ctrl, interrupt);
 547                 return -EIO;
 548         }
 549
 550         if (!(interrupt & ONENAND_INT_MASTER)) {
 551                 printk(KERN_ERR "%s: timeout! ctrl=0x%04x intr=0x%04x\n",
 552                        __func__, ctrl, interrupt);
 553                 return -EIO;
 554         }
 555
 556         /* If there's controller error, it's a real error */
 557         if (ctrl & ONENAND_CTRL_ERROR) {
 558                 printk(KERN_ERR "%s: controller error = 0x%04x\n",
 559                         __func__, ctrl);
 560                 if (ctrl & ONENAND_CTRL_LOCK)
 561                         printk(KERN_ERR "%s: it's locked error.\n", __func__);
 562                 return -EIO;
 563         }
 564
 565         return 0;
 566 }
 567
 568 /*
 569  * onenand_interrupt - [DEFAULT] onenand interrupt handler
 570  * @param irq           onenand interrupt number
 571  * @param dev_id        interrupt data
 572  *
 573  * complete the work
 574  */
 575 static irqreturn_t onenand_interrupt(int irq, void *data)
 576 {
 577         struct onenand_chip *this = data;
 578
 579         /* To handle shared interrupt */
 580         if (!this->complete.done)
 581                 complete(&this->complete);
 582
 583         return IRQ_HANDLED;
 584 }
 585
 586 /*
 587  * onenand_interrupt_wait - [DEFAULT] wait until the command is done
 588  * @param mtd           MTD device structure
 589  * @param state         state to select the max. timeout value
 590  *
 591  * Wait for command done.
 592  */
 593 static int onenand_interrupt_wait(struct mtd_info *mtd, int state)
 594 {
 595         struct onenand_chip *this = mtd->priv;
 596
 597         wait_for_completion(&this->complete);
 598
 599         return onenand_wait(mtd, state);
 600 }
 601
 602 /*
 603  * onenand_try_interrupt_wait - [DEFAULT] try interrupt wait
 604  * @param mtd           MTD device structure
 605  * @param state         state to select the max. timeout value
 606  *
 607  * Try interrupt based wait (It is used one-time)
 608  */
 609 static int onenand_try_interrupt_wait(struct mtd_info *mtd, int state)
 610 {
 611         struct onenand_chip *this = mtd->priv;
 612         unsigned long remain, timeout;
 613
 614         /* We use interrupt wait first */
 615         this->wait = onenand_interrupt_wait;
 616
 617         timeout = msecs_to_jiffies(100);
 618         remain = wait_for_completion_timeout(&this->complete, timeout);
 619         if (!remain) {
 620                 printk(KERN_INFO "OneNAND: There's no interrupt. "
 621                                 "We use the normal wait\n");
 622
 623                 /* Release the irq */
 624                 free_irq(this->irq, this);
 625
 626                 this->wait = onenand_wait;
 627         }
 628
 629         return onenand_wait(mtd, state);
 630 }
 631
 632 /*
 633  * onenand_setup_wait - [OneNAND Interface] setup onenand wait method
 634  * @param mtd           MTD device structure
 635  *
 636  * There's two method to wait onenand work
 637  * 1. polling - read interrupt status register
 638  * 2. interrupt - use the kernel interrupt method
 639  */
 640 static void onenand_setup_wait(struct mtd_info *mtd)
 641 {
 642         struct onenand_chip *this = mtd->priv;
 643         int syscfg;
 644
 645         init_completion(&this->complete);
 646
 647         if (this->irq <= 0) {
 648                 this->wait = onenand_wait;
 649                 return;
 650         }
 651
 652         if (request_irq(this->irq, &onenand_interrupt,
 653                                 IRQF_SHARED, "onenand", this)) {
 654                 /* If we can't get irq, use the normal wait */
 655                 this->wait = onenand_wait;
 656                 return;
 657         }
 658
 659         /* Enable interrupt */
 660         syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
 661         syscfg |= ONENAND_SYS_CFG1_IOBE;
 662         this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
 663
 664         this->wait = onenand_try_interrupt_wait;
 665 }
 666
 667 /**
 668  * onenand_bufferram_offset - [DEFAULT] BufferRAM offset
 669  * @param mtd           MTD data structure
 670  * @param area          BufferRAM area
 671  * @return              offset given area
 672  *
 673  * Return BufferRAM offset given area
 674  */
 675 static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area)
 676 {
 677         struct onenand_chip *this = mtd->priv;
 678
 679         if (ONENAND_CURRENT_BUFFERRAM(this)) {
 680                 /* Note: the 'this->writesize' is a real page size */
 681                 if (area == ONENAND_DATARAM)
 682                         return this->writesize;
 683                 if (area == ONENAND_SPARERAM)
 684                         return mtd->oobsize;
 685         }
 686
 687         return 0;
 688 }
 689
 690 /**
 691  * onenand_read_bufferram - [OneNAND Interface] Read the bufferram area
 692  * @param mtd           MTD data structure
 693  * @param area          BufferRAM area
 694  * @param buffer        the databuffer to put/get data
 695  * @param offset        offset to read from or write to
 696  * @param count         number of bytes to read/write
 697  *
 698  * Read the BufferRAM area
 699  */
 700 static int onenand_read_bufferram(struct mtd_info *mtd, int area,
 701                 unsigned char *buffer, int offset, size_t count)
 702 {
 703         struct onenand_chip *this = mtd->priv;
 704         void __iomem *bufferram;
 705
 706         bufferram = this->base + area;
 707
 708         bufferram += onenand_bufferram_offset(mtd, area);
 709
 710         if (ONENAND_CHECK_BYTE_ACCESS(count)) {
 711                 unsigned short word;
 712
 713                 /* Align with word(16-bit) size */
 714                 count--;
 715
 716                 /* Read word and save byte */
 717                 word = this->read_word(bufferram + offset + count);
 718                 buffer[count] = (word & 0xff);
 719         }
 720
 721         memcpy(buffer, bufferram + offset, count);
 722
 723         return 0;
 724 }
 725
 726 /**
 727  * onenand_sync_read_bufferram - [OneNAND Interface] Read the bufferram area with Sync. Burst mode
 728  * @param mtd           MTD data structure
 729  * @param area          BufferRAM area
 730  * @param buffer        the databuffer to put/get data
 731  * @param offset        offset to read from or write to
 732  * @param count         number of bytes to read/write
 733  *
 734  * Read the BufferRAM area with Sync. Burst Mode
 735  */
 736 static int onenand_sync_read_bufferram(struct mtd_info *mtd, int area,
 737                 unsigned char *buffer, int offset, size_t count)
 738 {
 739         struct onenand_chip *this = mtd->priv;
 740         void __iomem *bufferram;
 741
 742         bufferram = this->base + area;
 743
 744         bufferram += onenand_bufferram_offset(mtd, area);
 745
 746         this->mmcontrol(mtd, ONENAND_SYS_CFG1_SYNC_READ);
 747
 748         if (ONENAND_CHECK_BYTE_ACCESS(count)) {
 749                 unsigned short word;
 750
 751                 /* Align with word(16-bit) size */
 752                 count--;
 753
 754                 /* Read word and save byte */
 755                 word = this->read_word(bufferram + offset + count);
 756                 buffer[count] = (word & 0xff);
 757         }
 758
 759         memcpy(buffer, bufferram + offset, count);
 760
 761         this->mmcontrol(mtd, 0);
 762
 763         return 0;
 764 }
 765
 766 /**
 767  * onenand_write_bufferram - [OneNAND Interface] Write the bufferram area
 768  * @param mtd           MTD data structure
 769  * @param area          BufferRAM area
 770  * @param buffer        the databuffer to put/get data
 771  * @param offset        offset to read from or write to
 772  * @param count         number of bytes to read/write
 773  *
 774  * Write the BufferRAM area
 775  */
 776 static int onenand_write_bufferram(struct mtd_info *mtd, int area,
 777                 const unsigned char *buffer, int offset, size_t count)
 778 {
 779         struct onenand_chip *this = mtd->priv;
 780         void __iomem *bufferram;
 781
 782         bufferram = this->base + area;
 783
 784         bufferram += onenand_bufferram_offset(mtd, area);
 785
 786         if (ONENAND_CHECK_BYTE_ACCESS(count)) {
 787                 unsigned short word;
 788                 int byte_offset;
 789
 790                 /* Align with word(16-bit) size */
 791                 count--;
 792
 793                 /* Calculate byte access offset */
 794                 byte_offset = offset + count;
 795
 796                 /* Read word and save byte */
 797                 word = this->read_word(bufferram + byte_offset);
 798                 word = (word & ~0xff) | buffer[count];
 799                 this->write_word(word, bufferram + byte_offset);
 800         }
 801
 802         memcpy(bufferram + offset, buffer, count);
 803
 804         return 0;
 805 }
 806
 807 /**
 808  * onenand_get_2x_blockpage - [GENERIC] Get blockpage at 2x program mode
 809  * @param mtd           MTD data structure
 810  * @param addr          address to check
 811  * @return              blockpage address
 812  *
 813  * Get blockpage address at 2x program mode
 814  */
 815 static int onenand_get_2x_blockpage(struct mtd_info *mtd, loff_t addr)
 816 {
 817         struct onenand_chip *this = mtd->priv;
 818         int blockpage, block, page;
 819
 820         /* Calculate the even block number */
 821         block = (int) (addr >> this->erase_shift) & ~1;
 822         /* Is it the odd plane? */
 823         if (addr & this->writesize)
 824                 block++;
 825         page = (int) (addr >> (this->page_shift + 1)) & this->page_mask;
 826         blockpage = (block << 7) | page;
 827
 828         return blockpage;
 829 }
 830
 831 /**
 832  * onenand_check_bufferram - [GENERIC] Check BufferRAM information
 833  * @param mtd           MTD data structure
 834  * @param addr          address to check
 835  * @return              1 if there are valid data, otherwise 0
 836  *
 837  * Check bufferram if there is data we required
 838  */
 839 static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
 840 {
 841         struct onenand_chip *this = mtd->priv;
 842         int blockpage, found = 0;
 843         unsigned int i;
 844
 845         if (ONENAND_IS_2PLANE(this))
 846                 blockpage = onenand_get_2x_blockpage(mtd, addr);
 847         else
 848                 blockpage = (int) (addr >> this->page_shift);
 849
 850         /* Is there valid data? */
 851         i = ONENAND_CURRENT_BUFFERRAM(this);
 852         if (this->bufferram[i].blockpage == blockpage)
 853                 found = 1;
 854         else {
 855                 /* Check another BufferRAM */
 856                 i = ONENAND_NEXT_BUFFERRAM(this);
 857                 if (this->bufferram[i].blockpage == blockpage) {
 858                         ONENAND_SET_NEXT_BUFFERRAM(this);
 859                         found = 1;
 860                 }
 861         }
 862
 863         if (found && ONENAND_IS_DDP(this)) {
 864                 /* Select DataRAM for DDP */
 865                 int block = onenand_block(this, addr);
 866                 int value = onenand_bufferram_address(this, block);
 867                 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
 868         }
 869
 870         return found;
 871 }
 872
 873 /**
 874  * onenand_update_bufferram - [GENERIC] Update BufferRAM information
 875  * @param mtd           MTD data structure
 876  * @param addr          address to update
 877  * @param valid         valid flag
 878  *
 879  * Update BufferRAM information
 880  */
 881 static void onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
 882                 int valid)
 883 {
 884         struct onenand_chip *this = mtd->priv;
 885         int blockpage;
 886         unsigned int i;
 887
 888         if (ONENAND_IS_2PLANE(this))
 889                 blockpage = onenand_get_2x_blockpage(mtd, addr);
 890         else
 891                 blockpage = (int) (addr >> this->page_shift);
 892
 893         /* Invalidate another BufferRAM */
 894         i = ONENAND_NEXT_BUFFERRAM(this);
 895         if (this->bufferram[i].blockpage == blockpage)
 896                 this->bufferram[i].blockpage = -1;
 897
 898         /* Update BufferRAM */
 899         i = ONENAND_CURRENT_BUFFERRAM(this);
 900         if (valid)
 901                 this->bufferram[i].blockpage = blockpage;
 902         else
 903                 this->bufferram[i].blockpage = -1;
 904 }
 905
 906 /**
 907  * onenand_invalidate_bufferram - [GENERIC] Invalidate BufferRAM information
 908  * @param mtd           MTD data structure
 909  * @param addr          start address to invalidate
 910  * @param len           length to invalidate
 911  *
 912  * Invalidate BufferRAM information
 913  */
 914 static void onenand_invalidate_bufferram(struct mtd_info *mtd, loff_t addr,
 915                 unsigned int len)
 916 {
 917         struct onenand_chip *this = mtd->priv;
 918         int i;
 919         loff_t end_addr = addr + len;
 920
 921         /* Invalidate BufferRAM */
 922         for (i = 0; i < MAX_BUFFERRAM; i++) {
 923                 loff_t buf_addr = this->bufferram[i].blockpage << this->page_shift;
 924                 if (buf_addr >= addr && buf_addr < end_addr)
 925                         this->bufferram[i].blockpage = -1;
 926         }
 927 }
 928
 929 /**
 930  * onenand_get_device - [GENERIC] Get chip for selected access
 931  * @param mtd           MTD device structure
 932  * @param new_state     the state which is requested
 933  *
 934  * Get the device and lock it for exclusive access
 935  */
 936 static int onenand_get_device(struct mtd_info *mtd, int new_state)
 937 {
 938         struct onenand_chip *this = mtd->priv;
 939         DECLARE_WAITQUEUE(wait, current);
 940
 941         /*
 942          * Grab the lock and see if the device is available
 943          */
 944         while (1) {
 945                 spin_lock(&this->chip_lock);
 946                 if (this->state == FL_READY) {
 947                         this->state = new_state;
 948                         spin_unlock(&this->chip_lock);
 949                         break;
 950                 }
 951                 if (new_state == FL_PM_SUSPENDED) {
 952                         spin_unlock(&this->chip_lock);
 953                         return (this->state == FL_PM_SUSPENDED) ? 0 : -EAGAIN;
 954                 }
 955                 set_current_state(TASK_UNINTERRUPTIBLE);
 956                 add_wait_queue(&this->wq, &wait);
 957                 spin_unlock(&this->chip_lock);
 958                 schedule();
 959                 remove_wait_queue(&this->wq, &wait);
 960         }
 961
 962         return 0;
 963 }
 964
 965 /**
 966  * onenand_release_device - [GENERIC] release chip
 967  * @param mtd           MTD device structure
 968  *
 969  * Deselect, release chip lock and wake up anyone waiting on the device
 970  */
 971 static void onenand_release_device(struct mtd_info *mtd)
 972 {
 973         struct onenand_chip *this = mtd->priv;
 974
 975         /* Release the chip */
 976         spin_lock(&this->chip_lock);
 977         this->state = FL_READY;
 978         wake_up(&this->wq);
 979         spin_unlock(&this->chip_lock);
 980 }
 981
 982 /**
 983  * onenand_transfer_auto_oob - [Internal] oob auto-placement transfer
 984  * @param mtd           MTD device structure
 985  * @param buf           destination address
 986  * @param column        oob offset to read from
 987  * @param thislen       oob length to read
 988  */
 989 static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int column,
 990                                 int thislen)
 991 {
 992         struct onenand_chip *this = mtd->priv;
 993         struct nand_oobfree *free;
 994         int readcol = column;
 995         int readend = column + thislen;
 996         int lastgap = 0;
 997         unsigned int i;
 998         uint8_t *oob_buf = this->oob_buf;
 999
1000         free = this->ecclayout->oobfree;
1001         for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
1002                 if (readcol >= lastgap)
1003                         readcol += free->offset - lastgap;
1004                 if (readend >= lastgap)
1005                         readend += free->offset - lastgap;
1006                 lastgap = free->offset + free->length;
1007         }
1008         this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
1009         free = this->ecclayout->oobfree;
1010         for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
1011                 int free_end = free->offset + free->length;
1012                 if (free->offset < readend && free_end > readcol) {
1013                         int st = max_t(int,free->offset,readcol);
1014                         int ed = min_t(int,free_end,readend);
1015                         int n = ed - st;
1016                         memcpy(buf, oob_buf + st, n);
1017                         buf += n;
1018                 } else if (column == 0)
1019                         break;
1020         }
1021         return 0;
1022 }
1023
1024 /**
1025  * onenand_recover_lsb - [Flex-OneNAND] Recover LSB page data
1026  * @param mtd           MTD device structure
1027  * @param addr          address to recover
1028  * @param status        return value from onenand_wait / onenand_bbt_wait
1029  *
1030  * MLC NAND Flash cell has paired pages - LSB page and MSB page. LSB page has
1031  * lower page address and MSB page has higher page address in paired pages.
1032  * If power off occurs during MSB page program, the paired LSB page data can
1033  * become corrupt. LSB page recovery read is a way to read LSB page though page
1034  * data are corrupted. When uncorrectable error occurs as a result of LSB page
1035  * read after power up, issue LSB page recovery read.
1036  */
1037 static int onenand_recover_lsb(struct mtd_info *mtd, loff_t addr, int status)
1038 {
1039         struct onenand_chip *this = mtd->priv;
1040         int i;
1041
1042         /* Recovery is only for Flex-OneNAND */
1043         if (!FLEXONENAND(this))
1044                 return status;
1045
1046         /* check if we failed due to uncorrectable error */
1047         if (status != -EBADMSG && status != ONENAND_BBT_READ_ECC_ERROR)
1048                 return status;
1049
1050         /* check if address lies in MLC region */
1051         i = flexonenand_region(mtd, addr);
1052         if (mtd->eraseregions[i].erasesize < (1 << this->erase_shift))
1053                 return status;
1054
1055         /* We are attempting to reread, so decrement stats.failed
1056          * which was incremented by onenand_wait due to read failure
1057          */
1058         printk(KERN_INFO "%s: Attempting to recover from uncorrectable read\n",
1059                 __func__);
1060         mtd->ecc_stats.failed--;
1061
1062         /* Issue the LSB page recovery command */
1063         this->command(mtd, FLEXONENAND_CMD_RECOVER_LSB, addr, this->writesize);
1064         return this->wait(mtd, FL_READING);
1065 }
1066
1067 /**
1068  * onenand_mlc_read_ops_nolock - MLC OneNAND read main and/or out-of-band
1069  * @param mtd           MTD device structure
1070  * @param from          offset to read from
1071  * @param ops:          oob operation description structure
1072  *
1073  * MLC OneNAND / Flex-OneNAND has 4KB page size and 4KB dataram.
1074  * So, read-while-load is not present.
1075  */
1076 static int onenand_mlc_read_ops_nolock(struct mtd_info *mtd, loff_t from,
1077                                 struct mtd_oob_ops *ops)
1078 {
1079         struct onenand_chip *this = mtd->priv;
1080         struct mtd_ecc_stats stats;
1081         size_t len = ops->len;
1082         size_t ooblen = ops->ooblen;
1083         u_char *buf = ops->datbuf;
1084         u_char *oobbuf = ops->oobbuf;
1085         int read = 0, column, thislen;
1086         int oobread = 0, oobcolumn, thisooblen, oobsize;
1087         int ret = 0;
1088         int writesize = this->writesize;
1089
1090         DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
1091               __func__, (unsigned int) from, (int) len);
1092
1093         if (ops->mode == MTD_OOB_AUTO)
1094                 oobsize = this->ecclayout->oobavail;
1095         else
1096                 oobsize = mtd->oobsize;
1097
1098         oobcolumn = from & (mtd->oobsize - 1);
1099
1100         /* Do not allow reads past end of device */
1101         if (from + len > mtd->size) {
1102                 printk(KERN_ERR "%s: Attempt read beyond end of device\n",
1103                         __func__);
1104                 ops->retlen = 0;
1105                 ops->oobretlen = 0;
1106                 return -EINVAL;
1107         }
1108
1109         stats = mtd->ecc_stats;
1110
1111         while (read < len) {
1112                 cond_resched();
1113
1114                 thislen = min_t(int, writesize, len - read);
1115
1116                 column = from & (writesize - 1);
1117                 if (column + thislen > writesize)
1118                         thislen = writesize - column;
1119
1120                 if (!onenand_check_bufferram(mtd, from)) {
1121                         this->command(mtd, ONENAND_CMD_READ, from, writesize);
1122
1123                         ret = this->wait(mtd, FL_READING);
1124                         if (unlikely(ret))
1125                                 ret = onenand_recover_lsb(mtd, from, ret);
1126                         onenand_update_bufferram(mtd, from, !ret);
1127                         if (ret == -EBADMSG)
1128                                 ret = 0;
1129                 }
1130
1131                 this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
1132                 if (oobbuf) {
1133                         thisooblen = oobsize - oobcolumn;
1134                         thisooblen = min_t(int, thisooblen, ooblen - oobread);
1135
1136                         if (ops->mode == MTD_OOB_AUTO)
1137                                 onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
1138                         else
1139                                 this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
1140                         oobread += thisooblen;
1141                         oobbuf += thisooblen;
1142                         oobcolumn = 0;
1143                 }
1144
1145                 read += thislen;
1146                 if (read == len)
1147                         break;
1148
1149                 from += thislen;
1150                 buf += thislen;
1151         }
1152
1153         /*
1154          * Return success, if no ECC failures, else -EBADMSG
1155          * fs driver will take care of that, because
1156          * retlen == desired len and result == -EBADMSG
1157          */
1158         ops->retlen = read;
1159         ops->oobretlen = oobread;
1160
1161         if (ret)
1162                 return ret;
1163
1164         if (mtd->ecc_stats.failed - stats.failed)
1165                 return -EBADMSG;
1166
1167         return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
1168 }
1169
1170 /**
1171  * onenand_read_ops_nolock - [OneNAND Interface] OneNAND read main and/or out-of-band
1172  * @param mtd           MTD device structure
1173  * @param from          offset to read from
1174  * @param ops:          oob operation description structure
1175  *
1176  * OneNAND read main and/or out-of-band data
1177  */
1178 static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from,
1179                                 struct mtd_oob_ops *ops)
1180 {
1181         struct onenand_chip *this = mtd->priv;
1182         struct mtd_ecc_stats stats;
1183         size_t len = ops->len;
1184         size_t ooblen = ops->ooblen;
1185         u_char *buf = ops->datbuf;
1186         u_char *oobbuf = ops->oobbuf;
1187         int read = 0, column, thislen;
1188         int oobread = 0, oobcolumn, thisooblen, oobsize;
1189         int ret = 0, boundary = 0;
1190         int writesize = this->writesize;
1191
1192         DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
1193                         __func__, (unsigned int) from, (int) len);
1194
1195         if (ops->mode == MTD_OOB_AUTO)
1196                 oobsize = this->ecclayout->oobavail;
1197         else
1198                 oobsize = mtd->oobsize;
1199
1200         oobcolumn = from & (mtd->oobsize - 1);
1201
1202         /* Do not allow reads past end of device */
1203         if ((from + len) > mtd->size) {
1204                 printk(KERN_ERR "%s: Attempt read beyond end of device\n",
1205                         __func__);
1206                 ops->retlen = 0;
1207                 ops->oobretlen = 0;
1208                 return -EINVAL;
1209         }
1210
1211         stats = mtd->ecc_stats;
1212
1213         /* Read-while-load method */
1214
1215         /* Do first load to bufferRAM */
1216         if (read < len) {
1217                 if (!onenand_check_bufferram(mtd, from)) {
1218                         this->command(mtd, ONENAND_CMD_READ, from, writesize);
1219                         ret = this->wait(mtd, FL_READING);
1220                         onenand_update_bufferram(mtd, from, !ret);
1221                         if (ret == -EBADMSG)
1222                                 ret = 0;
1223                 }
1224         }
1225
1226         thislen = min_t(int, writesize, len - read);
1227         column = from & (writesize - 1);
1228         if (column + thislen > writesize)
1229                 thislen = writesize - column;
1230
1231         while (!ret) {
1232                 /* If there is more to load then start next load */
1233                 from += thislen;
1234                 if (read + thislen < len) {
1235                         this->command(mtd, ONENAND_CMD_READ, from, writesize);
1236                         /*
1237                          * Chip boundary handling in DDP
1238                          * Now we issued chip 1 read and pointed chip 1
1239                          * bufferram so we have to point chip 0 bufferram.
1240                          */
1241                         if (ONENAND_IS_DDP(this) &&
1242                             unlikely(from == (this->chipsize >> 1))) {
1243                                 this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2);
1244                                 boundary = 1;
1245                         } else
1246                                 boundary = 0;
1247                         ONENAND_SET_PREV_BUFFERRAM(this);
1248                 }
1249                 /* While load is going, read from last bufferRAM */
1250                 this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
1251
1252                 /* Read oob area if needed */
1253                 if (oobbuf) {
1254                         thisooblen = oobsize - oobcolumn;
1255                         thisooblen = min_t(int, thisooblen, ooblen - oobread);
1256
1257                         if (ops->mode == MTD_OOB_AUTO)
1258                                 onenand_transfer_auto_oob(mtd, oobbuf, oobcolumn, thisooblen);
1259                         else
1260                                 this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, oobcolumn, thisooblen);
1261                         oobread += thisooblen;
1262                         oobbuf += thisooblen;
1263                         oobcolumn = 0;
1264                 }
1265
1266                 /* See if we are done */
1267                 read += thislen;
1268                 if (read == len)
1269                         break;
1270                 /* Set up for next read from bufferRAM */
1271                 if (unlikely(boundary))
1272                         this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
1273                 ONENAND_SET_NEXT_BUFFERRAM(this);
1274                 buf += thislen;
1275                 thislen = min_t(int, writesize, len - read);
1276                 column = 0;
1277                 cond_resched();
1278                 /* Now wait for load */
1279                 ret = this->wait(mtd, FL_READING);
1280                 onenand_update_bufferram(mtd, from, !ret);
1281                 if (ret == -EBADMSG)
1282                         ret = 0;
1283         }
1284
1285         /*
1286          * Return success, if no ECC failures, else -EBADMSG
1287          * fs driver will take care of that, because
1288          * retlen == desired len and result == -EBADMSG
1289          */
1290         ops->retlen = read;
1291         ops->oobretlen = oobread;
1292
1293         if (ret)
1294                 return ret;
1295
1296         if (mtd->ecc_stats.failed - stats.failed)
1297                 return -EBADMSG;
1298
1299         return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
1300 }
1301
1302 /**
1303  * onenand_read_oob_nolock - [MTD Interface] OneNAND read out-of-band
1304  * @param mtd           MTD device structure
1305  * @param from          offset to read from
1306  * @param ops:          oob operation description structure
1307  *
1308  * OneNAND read out-of-band data from the spare area
1309  */
1310 static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from,
1311                         struct mtd_oob_ops *ops)
1312 {
1313         struct onenand_chip *this = mtd->priv;
1314         struct mtd_ecc_stats stats;
1315         int read = 0, thislen, column, oobsize;
1316         size_t len = ops->ooblen;
1317         mtd_oob_mode_t mode = ops->mode;
1318         u_char *buf = ops->oobbuf;
1319         int ret = 0, readcmd;
1320
1321         from += ops->ooboffs;
1322
1323         DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %i\n",
1324                 __func__, (unsigned int) from, (int) len);
1325
1326         /* Initialize return length value */
1327         ops->oobretlen = 0;
1328
1329         if (mode == MTD_OOB_AUTO)
1330                 oobsize = this->ecclayout->oobavail;
1331         else
1332                 oobsize = mtd->oobsize;
1333
1334         column = from & (mtd->oobsize - 1);
1335
1336         if (unlikely(column >= oobsize)) {
1337                 printk(KERN_ERR "%s: Attempted to start read outside oob\n",
1338                         __func__);
1339                 return -EINVAL;
1340         }
1341
1342         /* Do not allow reads past end of device */
1343         if (unlikely(from >= mtd->size ||
1344                      column + len > ((mtd->size >> this->page_shift) -
1345                                      (from >> this->page_shift)) * oobsize)) {
1346                 printk(KERN_ERR "%s: Attempted to read beyond end of device\n",
1347                         __func__);
1348                 return -EINVAL;
1349         }
1350
1351         stats = mtd->ecc_stats;
1352
1353         readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
1354
1355         while (read < len) {
1356                 cond_resched();
1357
1358                 thislen = oobsize - column;
1359                 thislen = min_t(int, thislen, len);
1360
1361                 this->command(mtd, readcmd, from, mtd->oobsize);
1362
1363                 onenand_update_bufferram(mtd, from, 0);
1364
1365                 ret = this->wait(mtd, FL_READING);
1366                 if (unlikely(ret))
1367                         ret = onenand_recover_lsb(mtd, from, ret);
1368
1369                 if (ret && ret != -EBADMSG) {
1370                         printk(KERN_ERR "%s: read failed = 0x%x\n",
1371                                 __func__, ret);
1372                         break;
1373                 }
1374
1375                 if (mode == MTD_OOB_AUTO)
1376                         onenand_transfer_auto_oob(mtd, buf, column, thislen);
1377                 else
1378                         this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
1379
1380                 read += thislen;
1381
1382                 if (read == len)
1383                         break;
1384
1385                 buf += thislen;
1386
1387                 /* Read more? */
1388                 if (read < len) {
1389                         /* Page size */
1390                         from += mtd->writesize;
1391                         column = 0;
1392                 }
1393         }
1394
1395         ops->oobretlen = read;
1396
1397         if (ret)
1398                 return ret;
1399
1400         if (mtd->ecc_stats.failed - stats.failed)
1401                 return -EBADMSG;
1402
1403         return 0;
1404 }
1405
1406 /**
1407  * onenand_read - [MTD Interface] Read data from flash
1408  * @param mtd           MTD device structure
1409  * @param from          offset to read from
1410  * @param len           number of bytes to read
1411  * @param retlen        pointer to variable to store the number of read bytes
1412  * @param buf           the databuffer to put data
1413  *
1414  * Read with ecc
1415 */
1416 static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
1417         size_t *retlen, u_char *buf)
1418 {
1419         struct onenand_chip *this = mtd->priv;
1420         struct mtd_oob_ops ops = {
1421                 .len    = len,
1422                 .ooblen = 0,
1423                 .datbuf = buf,
1424                 .oobbuf = NULL,
1425         };
1426         int ret;
1427
1428         onenand_get_device(mtd, FL_READING);
1429         ret = ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this) ?
1430                 onenand_mlc_read_ops_nolock(mtd, from, &ops) :
1431                 onenand_read_ops_nolock(mtd, from, &ops);
1432         onenand_release_device(mtd);
1433
1434         *retlen = ops.retlen;
1435         return ret;
1436 }
1437
1438 /**
1439  * onenand_read_oob - [MTD Interface] Read main and/or out-of-band
1440  * @param mtd:          MTD device structure
1441  * @param from:         offset to read from
1442  * @param ops:          oob operation description structure
1443
1444  * Read main and/or out-of-band
1445  */
1446 static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
1447                             struct mtd_oob_ops *ops)
1448 {
1449         struct onenand_chip *this = mtd->priv;
1450         int ret;
1451
1452         switch (ops->mode) {
1453         case MTD_OOB_PLACE:
1454         case MTD_OOB_AUTO:
1455                 break;
1456         case MTD_OOB_RAW:
1457                 /* Not implemented yet */
1458         default:
1459                 return -EINVAL;
1460         }
1461
1462         onenand_get_device(mtd, FL_READING);
1463         if (ops->datbuf)
1464                 ret = ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this) ?
1465                         onenand_mlc_read_ops_nolock(mtd, from, ops) :
1466                         onenand_read_ops_nolock(mtd, from, ops);
1467         else
1468                 ret = onenand_read_oob_nolock(mtd, from, ops);
1469         onenand_release_device(mtd);
1470
1471         return ret;
1472 }
1473
1474 /**
1475  * onenand_bbt_wait - [DEFAULT] wait until the command is done
1476  * @param mtd           MTD device structure
1477  * @param state         state to select the max. timeout value
1478  *
1479  * Wait for command done.
1480  */
1481 static int onenand_bbt_wait(struct mtd_info *mtd, int state)
1482 {
1483         struct onenand_chip *this = mtd->priv;
1484         unsigned long timeout;
1485         unsigned int interrupt;
1486         unsigned int ctrl;
1487
1488         /* The 20 msec is enough */
1489         timeout = jiffies + msecs_to_jiffies(20);
1490         while (time_before(jiffies, timeout)) {
1491                 interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
1492                 if (interrupt & ONENAND_INT_MASTER)
1493                         break;
1494         }
1495         /* To get correct interrupt status in timeout case */
1496         interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
1497         ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
1498
1499         if (interrupt & ONENAND_INT_READ) {
1500                 int ecc = onenand_read_ecc(this);
1501                 if (ecc & ONENAND_ECC_2BIT_ALL) {
1502                         printk(KERN_WARNING "%s: ecc error = 0x%04x, "
1503                                 "controller error 0x%04x\n",
1504                                 __func__, ecc, ctrl);
1505                         return ONENAND_BBT_READ_ECC_ERROR;
1506                 }
1507         } else {
1508                 printk(KERN_ERR "%s: read timeout! ctrl=0x%04x intr=0x%04x\n",
1509                         __func__, ctrl, interrupt);
1510                 return ONENAND_BBT_READ_FATAL_ERROR;
1511         }
1512
1513         /* Initial bad block case: 0x2400 or 0x0400 */
1514         if (ctrl & ONENAND_CTRL_ERROR) {
1515                 printk(KERN_DEBUG "%s: controller error = 0x%04x\n",
1516                         __func__, ctrl);
1517                 return ONENAND_BBT_READ_ERROR;
1518         }
1519
1520         return 0;
1521 }
1522
1523 /**
1524  * onenand_bbt_read_oob - [MTD Interface] OneNAND read out-of-band for bbt scan
1525  * @param mtd           MTD device structure
1526  * @param from          offset to read from
1527  * @param ops           oob operation description structure
1528  *
1529  * OneNAND read out-of-band data from the spare area for bbt scan
1530  */
1531 int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from,
1532                             struct mtd_oob_ops *ops)
1533 {
1534         struct onenand_chip *this = mtd->priv;
1535         int read = 0, thislen, column;
1536         int ret = 0, readcmd;
1537         size_t len = ops->ooblen;
1538         u_char *buf = ops->oobbuf;
1539
1540         DEBUG(MTD_DEBUG_LEVEL3, "%s: from = 0x%08x, len = %zi\n",
1541                 __func__, (unsigned int) from, len);
1542
1543         /* Initialize return value */
1544         ops->oobretlen = 0;
1545
1546         /* Do not allow reads past end of device */
1547         if (unlikely((from + len) > mtd->size)) {
1548                 printk(KERN_ERR "%s: Attempt read beyond end of device\n",
1549                         __func__);
1550                 return ONENAND_BBT_READ_FATAL_ERROR;
1551         }
1552
1553         /* Grab the lock and see if the device is available */
1554         onenand_get_device(mtd, FL_READING);
1555
1556         column = from & (mtd->oobsize - 1);
1557
1558         readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
1559
1560         while (read < len) {
1561                 cond_resched();
1562
1563                 thislen = mtd->oobsize - column;
1564                 thislen = min_t(int, thislen, len);
1565
1566                 this->command(mtd, readcmd, from, mtd->oobsize);
1567
1568                 onenand_update_bufferram(mtd, from, 0);
1569
1570                 ret = this->bbt_wait(mtd, FL_READING);
1571                 if (unlikely(ret))
1572                         ret = onenand_recover_lsb(mtd, from, ret);
1573
1574                 if (ret)
1575                         break;
1576
1577                 this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
1578                 read += thislen;
1579                 if (read == len)
1580                         break;
1581
1582                 buf += thislen;
1583
1584                 /* Read more? */
1585                 if (read < len) {
1586                         /* Update Page size */
1587                         from += this->writesize;
1588                         column = 0;
1589                 }
1590         }
1591
1592         /* Deselect and wake up anyone waiting on the device */
1593         onenand_release_device(mtd);
1594
1595         ops->oobretlen = read;
1596         return ret;
1597 }
1598
1599 #ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
1600 /**
1601  * onenand_verify_oob - [GENERIC] verify the oob contents after a write
1602  * @param mtd           MTD device structure
1603  * @param buf           the databuffer to verify
1604  * @param to            offset to read from
1605  */
1606 static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to)
1607 {
1608         struct onenand_chip *this = mtd->priv;
1609         u_char *oob_buf = this->oob_buf;
1610         int status, i, readcmd;
1611
1612         readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB;
1613
1614         this->command(mtd, readcmd, to, mtd->oobsize);
1615         onenand_update_bufferram(mtd, to, 0);
1616         status = this->wait(mtd, FL_READING);
1617         if (status)
1618                 return status;
1619
1620         this->read_bufferram(mtd, ONENAND_SPARERAM, oob_buf, 0, mtd->oobsize);
1621         for (i = 0; i < mtd->oobsize; i++)
1622                 if (buf[i] != 0xFF && buf[i] != oob_buf[i])
1623                         return -EBADMSG;
1624
1625         return 0;
1626 }
1627
1628 /**
1629  * onenand_verify - [GENERIC] verify the chip contents after a write
1630  * @param mtd          MTD device structure
1631  * @param buf          the databuffer to verify
1632  * @param addr         offset to read from
1633  * @param len          number of bytes to read and compare
1634  */
1635 static int onenand_verify(struct mtd_info *mtd, const u_char *buf, loff_t addr, size_t len)
1636 {
1637         struct onenand_chip *this = mtd->priv;
1638         int ret = 0;
1639         int thislen, column;
1640
1641         while (len != 0) {
1642                 thislen = min_t(int, this->writesize, len);
1643                 column = addr & (this->writesize - 1);
1644                 if (column + thislen > this->writesize)
1645                         thislen = this->writesize - column;
1646
1647                 this->command(mtd, ONENAND_CMD_READ, addr, this->writesize);
1648
1649                 onenand_update_bufferram(mtd, addr, 0);
1650
1651                 ret = this->wait(mtd, FL_READING);
1652                 if (ret)
1653                         return ret;
1654
1655                 onenand_update_bufferram(mtd, addr, 1);
1656
1657                 this->read_bufferram(mtd, ONENAND_DATARAM, this->verify_buf, 0, mtd->writesize);
1658
1659                 if (memcmp(buf, this->verify_buf, thislen))
1660                         return -EBADMSG;
1661
1662                 len -= thislen;
1663                 buf += thislen;
1664                 addr += thislen;
1665         }
1666
1667         return 0;
1668 }
1669 #else
1670 #define onenand_verify(...)             (0)
1671 #define onenand_verify_oob(...)         (0)
1672 #endif
1673
1674 #define NOTALIGNED(x)   ((x & (this->subpagesize - 1)) != 0)
1675
1676 static void onenand_panic_wait(struct mtd_info *mtd)
1677 {
1678         struct onenand_chip *this = mtd->priv;
1679         unsigned int interrupt;
1680         int i;
1681
1682         for (i = 0; i < 2000; i++) {
1683                 interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
1684                 if (interrupt & ONENAND_INT_MASTER)
1685                         break;
1686                 udelay(10);
1687         }
1688 }
1689
1690 /**
1691  * onenand_panic_write - [MTD Interface] write buffer to FLASH in a panic context
1692  * @param mtd           MTD device structure
1693  * @param to            offset to write to
1694  * @param len           number of bytes to write
1695  * @param retlen        pointer to variable to store the number of written bytes
1696  * @param buf           the data to write
1697  *
1698  * Write with ECC
1699  */
1700 static int onenand_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
1701                          size_t *retlen, const u_char *buf)
1702 {
1703         struct onenand_chip *this = mtd->priv;
1704         int column, subpage;
1705         int written = 0;
1706         int ret = 0;
1707
1708         if (this->state == FL_PM_SUSPENDED)
1709                 return -EBUSY;
1710
1711         /* Wait for any existing operation to clear */
1712         onenand_panic_wait(mtd);
1713
1714         DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
1715                 __func__, (unsigned int) to, (int) len);
1716
1717         /* Initialize retlen, in case of early exit */
1718         *retlen = 0;
1719
1720         /* Do not allow writes past end of device */
1721         if (unlikely((to + len) > mtd->size)) {
1722                 printk(KERN_ERR "%s: Attempt write to past end of device\n",
1723                         __func__);
1724                 return -EINVAL;
1725         }
1726
1727         /* Reject writes, which are not page aligned */
1728         if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) {
1729                 printk(KERN_ERR "%s: Attempt to write not page aligned data\n",
1730                         __func__);
1731                 return -EINVAL;
1732         }
1733
1734         column = to & (mtd->writesize - 1);
1735
1736         /* Loop until all data write */
1737         while (written < len) {
1738                 int thislen = min_t(int, mtd->writesize - column, len - written);
1739                 u_char *wbuf = (u_char *) buf;
1740
1741                 this->command(mtd, ONENAND_CMD_BUFFERRAM, to, thislen);
1742
1743                 /* Partial page write */
1744                 subpage = thislen < mtd->writesize;
1745                 if (subpage) {
1746                         memset(this->page_buf, 0xff, mtd->writesize);
1747                         memcpy(this->page_buf + column, buf, thislen);
1748                         wbuf = this->page_buf;
1749                 }
1750
1751                 this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, mtd->writesize);
1752                 this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize);
1753
1754                 this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
1755
1756                 onenand_panic_wait(mtd);
1757
1758                 /* In partial page write we don't update bufferram */
1759                 onenand_update_bufferram(mtd, to, !ret && !subpage);
1760                 if (ONENAND_IS_2PLANE(this)) {
1761                         ONENAND_SET_BUFFERRAM1(this);
1762                         onenand_update_bufferram(mtd, to + this->writesize, !ret && !subpage);
1763                 }
1764
1765                 if (ret) {
1766                         printk(KERN_ERR "%s: write failed %d\n", __func__, ret);
1767                         break;
1768                 }
1769
1770                 written += thislen;
1771
1772                 if (written == len)
1773                         break;
1774
1775                 column = 0;
1776                 to += thislen;
1777                 buf += thislen;
1778         }
1779
1780         *retlen = written;
1781         return ret;
1782 }
1783
1784 /**
1785  * onenand_fill_auto_oob - [Internal] oob auto-placement transfer
1786  * @param mtd           MTD device structure
1787  * @param oob_buf       oob buffer
1788  * @param buf           source address
1789  * @param column        oob offset to write to
1790  * @param thislen       oob length to write
1791  */
1792 static int onenand_fill_auto_oob(struct mtd_info *mtd, u_char *oob_buf,
1793                                   const u_char *buf, int column, int thislen)
1794 {
1795         struct onenand_chip *this = mtd->priv;
1796         struct nand_oobfree *free;
1797         int writecol = column;
1798         int writeend = column + thislen;
1799         int lastgap = 0;
1800         unsigned int i;
1801
1802         free = this->ecclayout->oobfree;
1803         for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
1804                 if (writecol >= lastgap)
1805                         writecol += free->offset - lastgap;
1806                 if (writeend >= lastgap)
1807                         writeend += free->offset - lastgap;
1808                 lastgap = free->offset + free->length;
1809         }
1810         free = this->ecclayout->oobfree;
1811         for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free->length; i++, free++) {
1812                 int free_end = free->offset + free->length;
1813                 if (free->offset < writeend && free_end > writecol) {
1814                         int st = max_t(int,free->offset,writecol);
1815                         int ed = min_t(int,free_end,writeend);
1816                         int n = ed - st;
1817                         memcpy(oob_buf + st, buf, n);
1818                         buf += n;
1819                 } else if (column == 0)
1820                         break;
1821         }
1822         return 0;
1823 }
1824
1825 /**
1826  * onenand_write_ops_nolock - [OneNAND Interface] write main and/or out-of-band
1827  * @param mtd           MTD device structure
1828  * @param to            offset to write to
1829  * @param ops           oob operation description structure
1830  *
1831  * Write main and/or oob with ECC
1832  */
1833 static int onenand_write_ops_nolock(struct mtd_info *mtd, loff_t to,
1834                                 struct mtd_oob_ops *ops)
1835 {
1836         struct onenand_chip *this = mtd->priv;
1837         int written = 0, column, thislen = 0, subpage = 0;
1838         int prev = 0, prevlen = 0, prev_subpage = 0, first = 1;
1839         int oobwritten = 0, oobcolumn, thisooblen, oobsize;
1840         size_t len = ops->len;
1841         size_t ooblen = ops->ooblen;
1842         const u_char *buf = ops->datbuf;
1843         const u_char *oob = ops->oobbuf;
1844         u_char *oobbuf;
1845         int ret = 0;
1846
1847         DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
1848                 __func__, (unsigned int) to, (int) len);
1849
1850         /* Initialize retlen, in case of early exit */
1851         ops->retlen = 0;
1852         ops->oobretlen = 0;
1853
1854         /* Do not allow writes past end of device */
1855         if (unlikely((to + len) > mtd->size)) {
1856                 printk(KERN_ERR "%s: Attempt write to past end of device\n",
1857                         __func__);
1858                 return -EINVAL;
1859         }
1860
1861         /* Reject writes, which are not page aligned */
1862         if (unlikely(NOTALIGNED(to) || NOTALIGNED(len))) {
1863                 printk(KERN_ERR "%s: Attempt to write not page aligned data\n",
1864                         __func__);
1865                 return -EINVAL;
1866         }
1867
1868         /* Check zero length */
1869         if (!len)
1870                 return 0;
1871
1872         if (ops->mode == MTD_OOB_AUTO)
1873                 oobsize = this->ecclayout->oobavail;
1874         else
1875                 oobsize = mtd->oobsize;
1876
1877         oobcolumn = to & (mtd->oobsize - 1);
1878
1879         column = to & (mtd->writesize - 1);
1880
1881         /* Loop until all data write */
1882         while (1) {
1883                 if (written < len) {
1884                         u_char *wbuf = (u_char *) buf;
1885
1886                         thislen = min_t(int, mtd->writesize - column, len - written);
1887                         thisooblen = min_t(int, oobsize - oobcolumn, ooblen - oobwritten);
1888
1889                         cond_resched();
1890
1891                         this->command(mtd, ONENAND_CMD_BUFFERRAM, to, thislen);
1892
1893                         /* Partial page write */
1894                         subpage = thislen < mtd->writesize;
1895                         if (subpage) {
1896                                 memset(this->page_buf, 0xff, mtd->writesize);
1897                                 memcpy(this->page_buf + column, buf, thislen);
1898                                 wbuf = this->page_buf;
1899                         }
1900
1901                         this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, mtd->writesize);
1902
1903                         if (oob) {
1904                                 oobbuf = this->oob_buf;
1905
1906                                 /* We send data to spare ram with oobsize
1907                                  * to prevent byte access */
1908                                 memset(oobbuf, 0xff, mtd->oobsize);
1909                                 if (ops->mode == MTD_OOB_AUTO)
1910                                         onenand_fill_auto_oob(mtd, oobbuf, oob, oobcolumn, thisooblen);
1911                                 else
1912                                         memcpy(oobbuf + oobcolumn, oob, thisooblen);
1913
1914                                 oobwritten += thisooblen;
1915                                 oob += thisooblen;
1916                                 oobcolumn = 0;
1917                         } else
1918                                 oobbuf = (u_char *) ffchars;
1919
1920                         this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
1921                 } else
1922                         ONENAND_SET_NEXT_BUFFERRAM(this);
1923
1924                 /*
1925                  * 2 PLANE, MLC, and Flex-OneNAND do not support
1926                  * write-while-program feature.
1927                  */
1928                 if (!ONENAND_IS_2PLANE(this) && !ONENAND_IS_4KB_PAGE(this) && !first) {
1929                         ONENAND_SET_PREV_BUFFERRAM(this);
1930
1931                         ret = this->wait(mtd, FL_WRITING);
1932
1933                         /* In partial page write we don't update bufferram */
1934                         onenand_update_bufferram(mtd, prev, !ret && !prev_subpage);
1935                         if (ret) {
1936                                 written -= prevlen;
1937                                 printk(KERN_ERR "%s: write failed %d\n",
1938                                         __func__, ret);
1939                                 break;
1940                         }
1941
1942                         if (written == len) {
1943                                 /* Only check verify write turn on */
1944                                 ret = onenand_verify(mtd, buf - len, to - len, len);
1945                                 if (ret)
1946                                         printk(KERN_ERR "%s: verify failed %d\n",
1947                                                 __func__, ret);
1948                                 break;
1949                         }
1950
1951                         ONENAND_SET_NEXT_BUFFERRAM(this);
1952                 }
1953
1954                 this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
1955
1956                 /*
1957                  * 2 PLANE, MLC, and Flex-OneNAND wait here
1958                  */
1959                 if (ONENAND_IS_2PLANE(this) || ONENAND_IS_4KB_PAGE(this)) {
1960                         ret = this->wait(mtd, FL_WRITING);
1961
1962                         /* In partial page write we don't update bufferram */
1963                         onenand_update_bufferram(mtd, to, !ret && !subpage);
1964                         if (ret) {
1965                                 printk(KERN_ERR "%s: write failed %d\n",
1966                                         __func__, ret);
1967                                 break;
1968                         }
1969
1970                         /* Only check verify write turn on */
1971                         ret = onenand_verify(mtd, buf, to, thislen);
1972                         if (ret) {
1973                                 printk(KERN_ERR "%s: verify failed %d\n",
1974                                         __func__, ret);
1975                                 break;
1976                         }
1977
1978                         written += thislen;
1979
1980                         if (written == len)
1981                                 break;
1982
1983                 } else
1984                         written += thislen;
1985
1986                 column = 0;
1987                 prev_subpage = subpage;
1988                 prev = to;
1989                 prevlen = thislen;
1990                 to += thislen;
1991                 buf += thislen;
1992                 first = 0;
1993         }
1994
1995         /* In error case, clear all bufferrams */
1996         if (written != len)
1997                 onenand_invalidate_bufferram(mtd, 0, -1);
1998
1999         ops->retlen = written;
2000         ops->oobretlen = oobwritten;
2001
2002         return ret;
2003 }
2004
2005
2006 /**
2007  * onenand_write_oob_nolock - [Internal] OneNAND write out-of-band
2008  * @param mtd           MTD device structure
2009  * @param to            offset to write to
2010  * @param len           number of bytes to write
2011  * @param retlen        pointer to variable to store the number of written bytes
2012  * @param buf           the data to write
2013  * @param mode          operation mode
2014  *
2015  * OneNAND write out-of-band
2016  */
2017 static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to,
2018                                     struct mtd_oob_ops *ops)
2019 {
2020         struct onenand_chip *this = mtd->priv;
2021         int column, ret = 0, oobsize;
2022         int written = 0, oobcmd;
2023         u_char *oobbuf;
2024         size_t len = ops->ooblen;
2025         const u_char *buf = ops->oobbuf;
2026         mtd_oob_mode_t mode = ops->mode;
2027
2028         to += ops->ooboffs;
2029
2030         DEBUG(MTD_DEBUG_LEVEL3, "%s: to = 0x%08x, len = %i\n",
2031                 __func__, (unsigned int) to, (int) len);
2032
2033         /* Initialize retlen, in case of early exit */
2034         ops->oobretlen = 0;
2035
2036         if (mode == MTD_OOB_AUTO)
2037                 oobsize = this->ecclayout->oobavail;
2038         else
2039                 oobsize = mtd->oobsize;
2040
2041         column = to & (mtd->oobsize - 1);
2042
2043         if (unlikely(column >= oobsize)) {
2044                 printk(KERN_ERR "%s: Attempted to start write outside oob\n",
2045                         __func__);
2046                 return -EINVAL;
2047         }
2048
2049         /* For compatibility with NAND: Do not allow write past end of page */
2050         if (unlikely(column + len > oobsize)) {
2051                 printk(KERN_ERR "%s: Attempt to write past end of page\n",
2052                         __func__);
2053                 return -EINVAL;
2054         }
2055
2056         /* Do not allow reads past end of device */
2057         if (unlikely(to >= mtd->size ||
2058                      column + len > ((mtd->size >> this->page_shift) -
2059                                      (to >> this->page_shift)) * oobsize)) {
2060                 printk(KERN_ERR "%s: Attempted to write past end of device\n",
2061                        __func__);
2062                 return -EINVAL;
2063         }
2064
2065         oobbuf = this->oob_buf;
2066
2067         oobcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_PROG : ONENAND_CMD_PROGOOB;
2068
2069         /* Loop until all data write */
2070         while (written < len) {
2071                 int thislen = min_t(int, oobsize, len - written);
2072
2073                 cond_resched();
2074
2075                 this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize);
2076
2077                 /* We send data to spare ram with oobsize
2078                  * to prevent byte access */
2079                 memset(oobbuf, 0xff, mtd->oobsize);
2080                 if (mode == MTD_OOB_AUTO)
2081                         onenand_fill_auto_oob(mtd, oobbuf, buf, column, thislen);
2082                 else
2083                         memcpy(oobbuf + column, buf, thislen);
2084                 this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
2085
2086                 if (ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this)) {
2087                         /* Set main area of DataRAM to 0xff*/
2088                         memset(this->page_buf, 0xff, mtd->writesize);
2089                         this->write_bufferram(mtd, ONENAND_DATARAM,
2090                                          this->page_buf, 0, mtd->writesize);
2091                 }
2092
2093                 this->command(mtd, oobcmd, to, mtd->oobsize);
2094
2095                 onenand_update_bufferram(mtd, to, 0);
2096                 if (ONENAND_IS_2PLANE(this)) {
2097                         ONENAND_SET_BUFFERRAM1(this);
2098                         onenand_update_bufferram(mtd, to + this->writesize, 0);
2099                 }
2100
2101                 ret = this->wait(mtd, FL_WRITING);
2102                 if (ret) {
2103                         printk(KERN_ERR "%s: write failed %d\n", __func__, ret);
2104                         break;
2105                 }
2106
2107                 ret = onenand_verify_oob(mtd, oobbuf, to);
2108                 if (ret) {
2109                         printk(KERN_ERR "%s: verify failed %d\n",
2110                                 __func__, ret);
2111                         break;
2112                 }
2113
2114                 written += thislen;
2115                 if (written == len)
2116                         break;
2117
2118                 to += mtd->writesize;
2119                 buf += thislen;
2120                 column = 0;
2121         }
2122
2123         ops->oobretlen = written;
2124
2125         return ret;
2126 }
2127
2128 /**
2129  * onenand_write - [MTD Interface] write buffer to FLASH
2130  * @param mtd           MTD device structure
2131  * @param to            offset to write to
2132  * @param len           number of bytes to write
2133  * @param retlen        pointer to variable to store the number of written bytes
2134  * @param buf           the data to write
2135  *
2136  * Write with ECC
2137  */
2138 static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
2139         size_t *retlen, const u_char *buf)
2140 {
2141         struct mtd_oob_ops ops = {
2142                 .len    = len,
2143                 .ooblen = 0,
2144                 .datbuf = (u_char *) buf,
2145                 .oobbuf = NULL,
2146         };
2147         int ret;
2148
2149         onenand_get_device(mtd, FL_WRITING);
2150         ret = onenand_write_ops_nolock(mtd, to, &ops);
2151         onenand_release_device(mtd);
2152
2153         *retlen = ops.retlen;
2154         return ret;
2155 }
2156
2157 /**
2158  * onenand_write_oob - [MTD Interface] NAND write data and/or out-of-band
2159  * @param mtd:          MTD device structure
2160  * @param to:           offset to write
2161  * @param ops:          oob operation description structure
2162  */
2163 static int onenand_write_oob(struct mtd_info *mtd, loff_t to,
2164                              struct mtd_oob_ops *ops)
2165 {
2166         int ret;
2167
2168         switch (ops->mode) {
2169         case MTD_OOB_PLACE:
2170         case MTD_OOB_AUTO:
2171                 break;
2172         case MTD_OOB_RAW:
2173                 /* Not implemented yet */
2174         default:
2175                 return -EINVAL;
2176         }
2177
2178         onenand_get_device(mtd, FL_WRITING);
2179         if (ops->datbuf)
2180                 ret = onenand_write_ops_nolock(mtd, to, ops);
2181         else
2182                 ret = onenand_write_oob_nolock(mtd, to, ops);
2183         onenand_release_device(mtd);
2184
2185         return ret;
2186 }
2187
2188 /**
2189  * onenand_block_isbad_nolock - [GENERIC] Check if a block is marked bad
2190  * @param mtd           MTD device structure
2191  * @param ofs           offset from device start
2192  * @param allowbbt      1, if its allowed to access the bbt area
2193  *
2194  * Check, if the block is bad. Either by reading the bad block table or
2195  * calling of the scan function.
2196  */
2197 static int onenand_block_isbad_nolock(struct mtd_info *mtd, loff_t ofs, int allowbbt)
2198 {
2199         struct onenand_chip *this = mtd->priv;
2200         struct bbm_info *bbm = this->bbm;
2201
2202         /* Return info from the table */
2203         return bbm->isbad_bbt(mtd, ofs, allowbbt);
2204 }
2205
2206
2207 static int onenand_multiblock_erase_verify(struct mtd_info *mtd,
2208                                            struct erase_info *instr)
2209 {
2210         struct onenand_chip *this = mtd->priv;
2211         loff_t addr = instr->addr;
2212         int len = instr->len;
2213         unsigned int block_size = (1 << this->erase_shift);
2214         int ret = 0;
2215
2216         while (len) {
2217                 this->command(mtd, ONENAND_CMD_ERASE_VERIFY, addr, block_size);
2218                 ret = this->wait(mtd, FL_VERIFYING_ERASE);
2219                 if (ret) {
2220                         printk(KERN_ERR "%s: Failed verify, block %d\n",
2221                                __func__, onenand_block(this, addr));
2222                         instr->state = MTD_ERASE_FAILED;
2223                         instr->fail_addr = addr;
2224                         return -1;
2225                 }
2226                 len -= block_size;
2227                 addr += block_size;
2228         }
2229         return 0;
2230 }
2231
2232 /**
2233  * onenand_multiblock_erase - [Internal] erase block(s) using multiblock erase
2234  * @param mtd           MTD device structure
2235  * @param instr         erase instruction
2236  * @param region        erase region
2237  *
2238  * Erase one or more blocks up to 64 block at a time
2239  */
2240 static int onenand_multiblock_erase(struct mtd_info *mtd,
2241                                     struct erase_info *instr,
2242                                     unsigned int block_size)
2243 {
2244         struct onenand_chip *this = mtd->priv;
2245         loff_t addr = instr->addr;
2246         int len = instr->len;
2247         int eb_count = 0;
2248         int ret = 0;
2249         int bdry_block = 0;
2250
2251         instr->state = MTD_ERASING;
2252
2253         if (ONENAND_IS_DDP(this)) {
2254                 loff_t bdry_addr = this->chipsize >> 1;
2255                 if (addr < bdry_addr && (addr + len) > bdry_addr)
2256                         bdry_block = bdry_addr >> this->erase_shift;
2257         }
2258
2259         /* Pre-check bbs */
2260         while (len) {
2261                 /* Check if we have a bad block, we do not erase bad blocks */
2262                 if (onenand_block_isbad_nolock(mtd, addr, 0)) {
2263                         printk(KERN_WARNING "%s: attempt to erase a bad block "
2264                                "at addr 0x%012llx\n",
2265                                __func__, (unsigned long long) addr);
2266                         instr->state = MTD_ERASE_FAILED;
2267                         return -EIO;
2268                 }
2269                 len -= block_size;
2270                 addr += block_size;
2271         }
2272
2273         len = instr->len;
2274         addr = instr->addr;
2275
2276         /* loop over 64 eb batches */
2277         while (len) {
2278                 struct erase_info verify_instr = *instr;
2279                 int max_eb_count = MB_ERASE_MAX_BLK_COUNT;
2280
2281                 verify_instr.addr = addr;
2282                 verify_instr.len = 0;
2283
2284                 /* do not cross chip boundary */
2285                 if (bdry_block) {
2286                         int this_block = (addr >> this->erase_shift);
2287
2288                         if (this_block < bdry_block) {
2289                                 max_eb_count = min(max_eb_count,
2290                                                    (bdry_block - this_block));
2291                         }
2292                 }
2293
2294                 eb_count = 0;
2295
2296                 while (len > block_size && eb_count < (max_eb_count - 1)) {
2297                         this->command(mtd, ONENAND_CMD_MULTIBLOCK_ERASE,
2298                                       addr, block_size);
2299                         onenand_invalidate_bufferram(mtd, addr, block_size);
2300
2301                         ret = this->wait(mtd, FL_PREPARING_ERASE);
2302                         if (ret) {
2303                                 printk(KERN_ERR "%s: Failed multiblock erase, "
2304                                        "block %d\n", __func__,
2305                                        onenand_block(this, addr));
2306                                 instr->state = MTD_ERASE_FAILED;
2307                                 instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
2308                                 return -EIO;
2309                         }
2310
2311                         len -= block_size;
2312                         addr += block_size;
2313                         eb_count++;
2314                 }
2315
2316                 /* last block of 64-eb series */
2317                 cond_resched();
2318                 this->command(mtd, ONENAND_CMD_ERASE, addr, block_size);
2319                 onenand_invalidate_bufferram(mtd, addr, block_size);
2320
2321                 ret = this->wait(mtd, FL_ERASING);
2322                 /* Check if it is write protected */
2323                 if (ret) {
2324                         printk(KERN_ERR "%s: Failed erase, block %d\n",
2325                                __func__, onenand_block(this, addr));
2326                         instr->state = MTD_ERASE_FAILED;
2327                         instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
2328                         return -EIO;
2329                 }
2330
2331                 len -= block_size;
2332                 addr += block_size;
2333                 eb_count++;
2334
2335                 /* verify */
2336                 verify_instr.len = eb_count * block_size;
2337                 if (onenand_multiblock_erase_verify(mtd, &verify_instr)) {
2338                         instr->state = verify_instr.state;
2339                         instr->fail_addr = verify_instr.fail_addr;
2340                         return -EIO;
2341                 }
2342
2343         }
2344         return 0;
2345 }
2346
2347
2348 /**
2349  * onenand_block_by_block_erase - [Internal] erase block(s) using regular erase
2350  * @param mtd           MTD device structure
2351  * @param instr         erase instruction
2352  * @param region        erase region
2353  * @param block_size    erase block size
2354  *
2355  * Erase one or more blocks one block at a time
2356  */
2357 static int onenand_block_by_block_erase(struct mtd_info *mtd,
2358                                         struct erase_info *instr,
2359                                         struct mtd_erase_region_info *region,
2360                                         unsigned int block_size)
2361 {
2362         struct onenand_chip *this = mtd->priv;
2363         loff_t addr = instr->addr;
2364         int len = instr->len;
2365         loff_t region_end = 0;
2366         int ret = 0;
2367
2368         if (region) {
2369                 /* region is set for Flex-OneNAND */
2370                 region_end = region->offset + region->erasesize * region->numblocks;
2371         }
2372
2373         instr->state = MTD_ERASING;
2374
2375         /* Loop through the blocks */
2376         while (len) {
2377                 cond_resched();
2378
2379                 /* Check if we have a bad block, we do not erase bad blocks */
2380                 if (onenand_block_isbad_nolock(mtd, addr, 0)) {
2381                         printk(KERN_WARNING "%s: attempt to erase a bad block "
2382                                         "at addr 0x%012llx\n",
2383                                         __func__, (unsigned long long) addr);
2384                         instr->state = MTD_ERASE_FAILED;
2385                         return -EIO;
2386                 }
2387
2388                 this->command(mtd, ONENAND_CMD_ERASE, addr, block_size);
2389
2390                 onenand_invalidate_bufferram(mtd, addr, block_size);
2391
2392                 ret = this->wait(mtd, FL_ERASING);
2393                 /* Check, if it is write protected */
2394                 if (ret) {
2395                         printk(KERN_ERR "%s: Failed erase, block %d\n",
2396                                 __func__, onenand_block(this, addr));
2397                         instr->state = MTD_ERASE_FAILED;
2398                         instr->fail_addr = addr;
2399                         return -EIO;
2400                 }
2401
2402                 len -= block_size;
2403                 addr += block_size;
2404
2405                 if (addr == region_end) {
2406                         if (!len)
2407                                 break;
2408                         region++;
2409
2410                         block_size = region->erasesize;
2411                         region_end = region->offset + region->erasesize * region->numblocks;
2412
2413                         if (len & (block_size - 1)) {
2414                                 /* FIXME: This should be handled at MTD partitioning level. */
2415                                 printk(KERN_ERR "%s: Unaligned address\n",
2416                                         __func__);
2417                                 return -EIO;
2418                         }
2419                 }
2420         }
2421         return 0;
2422 }
2423
2424 /**
2425  * onenand_erase - [MTD Interface] erase block(s)
2426  * @param mtd           MTD device structure
2427  * @param instr         erase instruction
2428  *
2429  * Erase one or more blocks
2430  */
2431 static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
2432 {
2433         struct onenand_chip *this = mtd->priv;
2434         unsigned int block_size;
2435         loff_t addr = instr->addr;
2436         loff_t len = instr->len;
2437         int ret = 0;
2438         struct mtd_erase_region_info *region = NULL;
2439         loff_t region_offset = 0;
2440
2441         DEBUG(MTD_DEBUG_LEVEL3, "%s: start=0x%012llx, len=%llu\n", __func__,
2442               (unsigned long long) instr->addr, (unsigned long long) instr->len);
2443
2444         /* Do not allow erase past end of device */
2445         if (unlikely((len + addr) > mtd->size)) {
2446                 printk(KERN_ERR "%s: Erase past end of device\n", __func__);
2447                 return -EINVAL;
2448         }
2449
2450         if (FLEXONENAND(this)) {
2451                 /* Find the eraseregion of this address */
2452                 int i = flexonenand_region(mtd, addr);
2453
2454                 region = &mtd->eraseregions[i];
2455                 block_size = region->erasesize;
2456
2457                 /* Start address within region must align on block boundary.
2458                  * Erase region's start offset is always block start address.
2459                  */
2460                 region_offset = region->offset;
2461         } else
2462                 block_size = 1 << this->erase_shift;
2463
2464         /* Start address must align on block boundary */
2465         if (unlikely((addr - region_offset) & (block_size - 1))) {
2466                 printk(KERN_ERR "%s: Unaligned address\n", __func__);
2467                 return -EINVAL;
2468         }
2469
2470         /* Length must align on block boundary */
2471         if (unlikely(len & (block_size - 1))) {
2472                 printk(KERN_ERR "%s: Length not block aligned\n", __func__);
2473                 return -EINVAL;
2474         }
2475
2476         instr->fail_addr = MTD_FAIL_ADDR_UNKNOWN;
2477
2478         /* Grab the lock and see if the device is available */
2479         onenand_get_device(mtd, FL_ERASING);
2480
2481         if (region || instr->len < MB_ERASE_MIN_BLK_COUNT * block_size) {
2482                 /* region is set for Flex-OneNAND (no mb erase) */
2483                 ret = onenand_block_by_block_erase(mtd, instr,
2484                                                    region, block_size);
2485         } else {
2486                 ret = onenand_multiblock_erase(mtd, instr, block_size);
2487         }
2488
2489         /* Deselect and wake up anyone waiting on the device */
2490         onenand_release_device(mtd);
2491
2492         /* Do call back function */
2493         if (!ret) {
2494                 instr->state = MTD_ERASE_DONE;
2495                 mtd_erase_callback(instr);
2496         }
2497
2498         return ret;
2499 }
2500
2501 /**
2502  * onenand_sync - [MTD Interface] sync
2503  * @param mtd           MTD device structure
2504  *
2505  * Sync is actually a wait for chip ready function
2506  */
2507 static void onenand_sync(struct mtd_info *mtd)
2508 {
2509         DEBUG(MTD_DEBUG_LEVEL3, "%s: called\n", __func__);
2510
2511         /* Grab the lock and see if the device is available */
2512         onenand_get_device(mtd, FL_SYNCING);
2513
2514         /* Release it and go back */
2515         onenand_release_device(mtd);
2516 }
2517
2518 /**
2519  * onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
2520  * @param mtd           MTD device structure
2521  * @param ofs           offset relative to mtd start
2522  *
2523  * Check whether the block is bad
2524  */
2525 static int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs)
2526 {
2527         int ret;
2528
2529         /* Check for invalid offset */
2530         if (ofs > mtd->size)
2531                 return -EINVAL;
2532
2533         onenand_get_device(mtd, FL_READING);
2534         ret = onenand_block_isbad_nolock(mtd, ofs, 0);
2535         onenand_release_device(mtd);
2536         return ret;
2537 }
2538
2539 /**
2540  * onenand_default_block_markbad - [DEFAULT] mark a block bad
2541  * @param mtd           MTD device structure
2542  * @param ofs           offset from device start
2543  *
2544  * This is the default implementation, which can be overridden by
2545  * a hardware specific driver.
2546  */
2547 static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
2548 {
2549         struct onenand_chip *this = mtd->priv;
2550         struct bbm_info *bbm = this->bbm;
2551         u_char buf[2] = {0, 0};
2552         struct mtd_oob_ops ops = {
2553                 .mode = MTD_OOB_PLACE,
2554                 .ooblen = 2,
2555                 .oobbuf = buf,
2556                 .ooboffs = 0,
2557         };
2558         int block;
2559
2560         /* Get block number */
2561         block = onenand_block(this, ofs);
2562         if (bbm->bbt)
2563                 bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
2564
2565         /* We write two bytes, so we don't have to mess with 16-bit access */
2566         ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
2567         /* FIXME : What to do when marking SLC block in partition
2568          *         with MLC erasesize? For now, it is not advisable to
2569          *         create partitions containing both SLC and MLC regions.
2570          */
2571         return onenand_write_oob_nolock(mtd, ofs, &ops);
2572 }
2573
2574 /**
2575  * onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
2576  * @param mtd           MTD device structure
2577  * @param ofs           offset relative to mtd start
2578  *
2579  * Mark the block as bad
2580  */
2581 static int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
2582 {
2583         struct onenand_chip *this = mtd->priv;
2584         int ret;
2585
2586         ret = onenand_block_isbad(mtd, ofs);
2587         if (ret) {
2588                 /* If it was bad already, return success and do nothing */
2589                 if (ret > 0)
2590                         return 0;
2591                 return ret;
2592         }
2593
2594         onenand_get_device(mtd, FL_WRITING);
2595         ret = this->block_markbad(mtd, ofs);
2596         onenand_release_device(mtd);
2597         return ret;
2598 }
2599
2600 /**
2601  * onenand_do_lock_cmd - [OneNAND Interface] Lock or unlock block(s)
2602  * @param mtd           MTD device structure
2603  * @param ofs           offset relative to mtd start
2604  * @param len           number of bytes to lock or unlock
2605  * @param cmd           lock or unlock command
2606  *
2607  * Lock or unlock one or more blocks
2608  */
2609 static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int cmd)
2610 {
2611         struct onenand_chip *this = mtd->priv;
2612         int start, end, block, value, status;
2613         int wp_status_mask;
2614
2615         start = onenand_block(this, ofs);
2616         end = onenand_block(this, ofs + len) - 1;
2617
2618         if (cmd == ONENAND_CMD_LOCK)
2619                 wp_status_mask = ONENAND_WP_LS;
2620         else
2621                 wp_status_mask = ONENAND_WP_US;
2622
2623         /* Continuous lock scheme */
2624         if (this->options & ONENAND_HAS_CONT_LOCK) {
2625                 /* Set start block address */
2626                 this->write_word(start, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
2627                 /* Set end block address */
2628                 this->write_word(end, this->base +  ONENAND_REG_END_BLOCK_ADDRESS);
2629                 /* Write lock command */
2630                 this->command(mtd, cmd, 0, 0);
2631
2632                 /* There's no return value */
2633                 this->wait(mtd, FL_LOCKING);
2634
2635                 /* Sanity check */
2636                 while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
2637                     & ONENAND_CTRL_ONGO)
2638                         continue;
2639
2640                 /* Check lock status */
2641                 status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
2642                 if (!(status & wp_status_mask))
2643                         printk(KERN_ERR "%s: wp status = 0x%x\n",
2644                                 __func__, status);
2645
2646                 return 0;
2647         }
2648
2649         /* Block lock scheme */
2650         for (block = start; block < end + 1; block++) {
2651                 /* Set block address */
2652                 value = onenand_block_address(this, block);
2653                 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
2654                 /* Select DataRAM for DDP */
2655                 value = onenand_bufferram_address(this, block);
2656                 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
2657                 /* Set start block address */
2658                 this->write_word(block, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
2659                 /* Write lock command */
2660                 this->command(mtd, cmd, 0, 0);
2661
2662                 /* There's no return value */
2663                 this->wait(mtd, FL_LOCKING);
2664
2665                 /* Sanity check */
2666                 while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
2667                     & ONENAND_CTRL_ONGO)
2668                         continue;
2669
2670                 /* Check lock status */
2671                 status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
2672                 if (!(status & wp_status_mask))
2673                         printk(KERN_ERR "%s: block = %d, wp status = 0x%x\n",
2674                                 __func__, block, status);
2675         }
2676
2677         return 0;
2678 }
2679
2680 /**
2681  * onenand_lock - [MTD Interface] Lock block(s)
2682  * @param mtd           MTD device structure
2683  * @param ofs           offset relative to mtd start
2684  * @param len           number of bytes to unlock
2685  *
2686  * Lock one or more blocks
2687  */
2688 static int onenand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
2689 {
2690         int ret;
2691
2692         onenand_get_device(mtd, FL_LOCKING);
2693         ret = onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_LOCK);
2694         onenand_release_device(mtd);
2695         return ret;
2696 }
2697
2698 /**
2699  * onenand_unlock - [MTD Interface] Unlock block(s)
2700  * @param mtd           MTD device structure
2701  * @param ofs           offset relative to mtd start
2702  * @param len           number of bytes to unlock
2703  *
2704  * Unlock one or more blocks
2705  */
2706 static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
2707 {
2708         int ret;
2709
2710         onenand_get_device(mtd, FL_LOCKING);
2711         ret = onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
2712         onenand_release_device(mtd);
2713         return ret;
2714 }
2715
2716 /**
2717  * onenand_check_lock_status - [OneNAND Interface] Check lock status
2718  * @param this          onenand chip data structure
2719  *
2720  * Check lock status
2721  */
2722 static int onenand_check_lock_status(struct onenand_chip *this)
2723 {
2724         unsigned int value, block, status;
2725         unsigned int end;
2726
2727         end = this->chipsize >> this->erase_shift;
2728         for (block = 0; block < end; block++) {
2729                 /* Set block address */
2730                 value = onenand_block_address(this, block);
2731                 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
2732                 /* Select DataRAM for DDP */
2733                 value = onenand_bufferram_address(this, block);
2734                 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
2735                 /* Set start block address */
2736                 this->write_word(block, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
2737
2738                 /* Check lock status */
2739                 status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
2740                 if (!(status & ONENAND_WP_US)) {
2741                         printk(KERN_ERR "%s: block = %d, wp status = 0x%x\n",
2742                                 __func__, block, status);
2743                         return 0;
2744                 }
2745         }
2746
2747         return 1;
2748 }
2749
2750 /**
2751  * onenand_unlock_all - [OneNAND Interface] unlock all blocks
2752  * @param mtd           MTD device structure
2753  *
2754  * Unlock all blocks
2755  */
2756 static void onenand_unlock_all(struct mtd_info *mtd)
2757 {
2758         struct onenand_chip *this = mtd->priv;
2759         loff_t ofs = 0;
2760         loff_t len = mtd->size;
2761
2762         if (this->options & ONENAND_HAS_UNLOCK_ALL) {
2763                 /* Set start block address */
2764                 this->write_word(0, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
2765                 /* Write unlock command */
2766                 this->command(mtd, ONENAND_CMD_UNLOCK_ALL, 0, 0);
2767
2768                 /* There's no return value */
2769                 this->wait(mtd, FL_LOCKING);
2770
2771                 /* Sanity check */
2772                 while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
2773                     & ONENAND_CTRL_ONGO)
2774                         continue;
2775
2776                 /* Don't check lock status */
2777                 if (this->options & ONENAND_SKIP_UNLOCK_CHECK)
2778                         return;
2779
2780                 /* Check lock status */
2781                 if (onenand_check_lock_status(this))
2782                         return;
2783
2784                 /* Workaround for all block unlock in DDP */
2785                 if (ONENAND_IS_DDP(this) && !FLEXONENAND(this)) {
2786                         /* All blocks on another chip */
2787                         ofs = this->chipsize >> 1;
2788                         len = this->chipsize >> 1;
2789                 }
2790         }
2791
2792         onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
2793 }
2794
2795 #ifdef CONFIG_MTD_ONENAND_OTP
2796
2797 /**
2798  * onenand_otp_command - Send OTP specific command to OneNAND device
2799  * @param mtd    MTD device structure
2800  * @param cmd    the command to be sent
2801  * @param addr   offset to read from or write to
2802  * @param len    number of bytes to read or write
2803  */
2804 static int onenand_otp_command(struct mtd_info *mtd, int cmd, loff_t addr,
2805                                 size_t len)
2806 {
2807         struct onenand_chip *this = mtd->priv;
2808         int value, block, page;
2809
2810         /* Address translation */
2811         switch (cmd) {
2812         case ONENAND_CMD_OTP_ACCESS:
2813                 block = (int) (addr >> this->erase_shift);
2814                 page = -1;
2815                 break;
2816
2817         default:
2818                 block = (int) (addr >> this->erase_shift);
2819                 page = (int) (addr >> this->page_shift);
2820
2821                 if (ONENAND_IS_2PLANE(this)) {
2822                         /* Make the even block number */
2823                         block &= ~1;
2824                         /* Is it the odd plane? */
2825                         if (addr & this->writesize)
2826                                 block++;
2827                         page >>= 1;
2828                 }
2829                 page &= this->page_mask;
2830                 break;
2831         }
2832
2833         if (block != -1) {
2834                 /* Write 'DFS, FBA' of Flash */
2835                 value = onenand_block_address(this, block);
2836                 this->write_word(value, this->base +
2837                                 ONENAND_REG_START_ADDRESS1);
2838         }
2839
2840         if (page != -1) {
2841                 /* Now we use page size operation */
2842                 int sectors = 4, count = 4;
2843                 int dataram;
2844
2845                 switch (cmd) {
2846                 default:
2847                         if (ONENAND_IS_2PLANE(this) && cmd == ONENAND_CMD_PROG)
2848                                 cmd = ONENAND_CMD_2X_PROG;
2849                         dataram = ONENAND_CURRENT_BUFFERRAM(this);
2850                         break;
2851                 }
2852
2853                 /* Write 'FPA, FSA' of Flash */
2854                 value = onenand_page_address(page, sectors);
2855                 this->write_word(value, this->base +
2856                                 ONENAND_REG_START_ADDRESS8);
2857
2858                 /* Write 'BSA, BSC' of DataRAM */
2859                 value = onenand_buffer_address(dataram, sectors, count);
2860                 this->write_word(value, this->base + ONENAND_REG_START_BUFFER);
2861         }
2862
2863         /* Interrupt clear */
2864         this->write_word(ONENAND_INT_CLEAR, this->base + ONENAND_REG_INTERRUPT);
2865
2866         /* Write command */
2867         this->write_word(cmd, this->base + ONENAND_REG_COMMAND);
2868
2869         return 0;
2870 }
2871
2872 /**
2873  * onenand_otp_write_oob_nolock - [Internal] OneNAND write out-of-band, specific to OTP
2874  * @param mtd           MTD device structure
2875  * @param to            offset to write to
2876  * @param len           number of bytes to write
2877  * @param retlen        pointer to variable to store the number of written bytes
2878  * @param buf           the data to write
2879  *
2880  * OneNAND write out-of-band only for OTP
2881  */
2882 static int onenand_otp_write_oob_nolock(struct mtd_info *mtd, loff_t to,
2883                                     struct mtd_oob_ops *ops)
2884 {
2885         struct onenand_chip *this = mtd->priv;
2886         int column, ret = 0, oobsize;
2887         int written = 0;
2888         u_char *oobbuf;
2889         size_t len = ops->ooblen;
2890         const u_char *buf = ops->oobbuf;
2891         int block, value, status;
2892
2893         to += ops->ooboffs;
2894
2895         /* Initialize retlen, in case of early exit */
2896         ops->oobretlen = 0;
2897
2898         oobsize = mtd->oobsize;
2899
2900         column = to & (mtd->oobsize - 1);
2901
2902         oobbuf = this->oob_buf;
2903
2904         /* Loop until all data write */
2905         while (written < len) {
2906                 int thislen = min_t(int, oobsize, len - written);
2907
2908                 cond_resched();
2909
2910                 block = (int) (to >> this->erase_shift);
2911                 /*
2912                  * Write 'DFS, FBA' of Flash
2913                  * Add: F100h DQ=DFS, FBA
2914                  */
2915
2916                 value = onenand_block_address(this, block);
2917                 this->write_word(value, this->base +
2918                                 ONENAND_REG_START_ADDRESS1);
2919
2920                 /*
2921                  * Select DataRAM for DDP
2922                  * Add: F101h DQ=DBS
2923                  */
2924
2925                 value = onenand_bufferram_address(this, block);
2926                 this->write_word(value, this->base +
2927                                 ONENAND_REG_START_ADDRESS2);
2928                 ONENAND_SET_NEXT_BUFFERRAM(this);
2929
2930                 /*
2931                  * Enter OTP access mode
2932                  */
2933                 this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
2934                 this->wait(mtd, FL_OTPING);
2935
2936                 /* We send data to spare ram with oobsize
2937                  * to prevent byte access */
2938                 memcpy(oobbuf + column, buf, thislen);
2939
2940                 /*
2941                  * Write Data into DataRAM
2942                  * Add: 8th Word
2943                  * in sector0/spare/page0
2944                  * DQ=XXFCh
2945                  */
2946                 this->write_bufferram(mtd, ONENAND_SPARERAM,
2947                                         oobbuf, 0, mtd->oobsize);
2948
2949                 onenand_otp_command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
2950                 onenand_update_bufferram(mtd, to, 0);
2951                 if (ONENAND_IS_2PLANE(this)) {
2952                         ONENAND_SET_BUFFERRAM1(this);
2953                         onenand_update_bufferram(mtd, to + this->writesize, 0);
2954                 }
2955
2956                 ret = this->wait(mtd, FL_WRITING);
2957                 if (ret) {
2958                         printk(KERN_ERR "%s: write failed %d\n", __func__, ret);
2959                         break;
2960                 }
2961
2962                 /* Exit OTP access mode */
2963                 this->command(mtd, ONENAND_CMD_RESET, 0, 0);
2964                 this->wait(mtd, FL_RESETING);
2965
2966                 status = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
2967                 status &= 0x60;
2968
2969                 if (status == 0x60) {
2970                         printk(KERN_DEBUG "\nBLOCK\tSTATUS\n");
2971                         printk(KERN_DEBUG "1st Block\tLOCKED\n");
2972                         printk(KERN_DEBUG "OTP Block\tLOCKED\n");
2973                 } else if (status == 0x20) {
2974                         printk(KERN_DEBUG "\nBLOCK\tSTATUS\n");
2975                         printk(KERN_DEBUG "1st Block\tLOCKED\n");
2976                         printk(KERN_DEBUG "OTP Block\tUN-LOCKED\n");
2977                 } else if (status == 0x40) {
2978                         printk(KERN_DEBUG "\nBLOCK\tSTATUS\n");
2979                         printk(KERN_DEBUG "1st Block\tUN-LOCKED\n");
2980                         printk(KERN_DEBUG "OTP Block\tLOCKED\n");
2981                 } else {
2982                         printk(KERN_DEBUG "Reboot to check\n");
2983                 }
2984
2985                 written += thislen;
2986                 if (written == len)
2987                         break;
2988
2989                 to += mtd->writesize;
2990                 buf += thislen;
2991                 column = 0;
2992         }
2993
2994         ops->oobretlen = written;
2995
2996         return ret;
2997 }
2998
2999 /* Internal OTP operation */
3000 typedef int (*otp_op_t)(struct mtd_info *mtd, loff_t form, size_t len,
3001                 size_t *retlen, u_char *buf);
3002
3003 /**
3004  * do_otp_read - [DEFAULT] Read OTP block area
3005  * @param mtd           MTD device structure
3006  * @param from          The offset to read
3007  * @param len           number of bytes to read
3008  * @param retlen        pointer to variable to store the number of readbytes
3009  * @param buf           the databuffer to put/get data
3010  *
3011  * Read OTP block area.
3012  */
3013 static int do_otp_read(struct mtd_info *mtd, loff_t from, size_t len,
3014                 size_t *retlen, u_char *buf)
3015 {
3016         struct onenand_chip *this = mtd->priv;
3017         struct mtd_oob_ops ops = {
3018                 .len    = len,
3019                 .ooblen = 0,
3020                 .datbuf = buf,
3021                 .oobbuf = NULL,
3022         };
3023         int ret;
3024
3025         /* Enter OTP access mode */
3026         this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
3027         this->wait(mtd, FL_OTPING);
3028
3029         ret = ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this) ?
3030                 onenand_mlc_read_ops_nolock(mtd, from, &ops) :
3031                 onenand_read_ops_nolock(mtd, from, &ops);
3032
3033         /* Exit OTP access mode */
3034         this->command(mtd, ONENAND_CMD_RESET, 0, 0);
3035         this->wait(mtd, FL_RESETING);
3036
3037         return ret;
3038 }
3039
3040 /**
3041  * do_otp_write - [DEFAULT] Write OTP block area
3042  * @param mtd           MTD device structure
3043  * @param to            The offset to write
3044  * @param len           number of bytes to write
3045  * @param retlen        pointer to variable to store the number of write bytes
3046  * @param buf           the databuffer to put/get data
3047  *
3048  * Write OTP block area.
3049  */
3050 static int do_otp_write(struct mtd_info *mtd, loff_t to, size_t len,
3051                 size_t *retlen, u_char *buf)
3052 {
3053         struct onenand_chip *this = mtd->priv;
3054         unsigned char *pbuf = buf;
3055         int ret;
3056         struct mtd_oob_ops ops;
3057
3058         /* Force buffer page aligned */
3059         if (len < mtd->writesize) {
3060                 memcpy(this->page_buf, buf, len);
3061                 memset(this->page_buf + len, 0xff, mtd->writesize - len);
3062                 pbuf = this->page_buf;
3063                 len = mtd->writesize;
3064         }
3065
3066         /* Enter OTP access mode */
3067         this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
3068         this->wait(mtd, FL_OTPING);
3069
3070         ops.len = len;
3071         ops.ooblen = 0;
3072         ops.datbuf = pbuf;
3073         ops.oobbuf = NULL;
3074         ret = onenand_write_ops_nolock(mtd, to, &ops);
3075         *retlen = ops.retlen;
3076
3077         /* Exit OTP access mode */
3078         this->command(mtd, ONENAND_CMD_RESET, 0, 0);
3079         this->wait(mtd, FL_RESETING);
3080
3081         return ret;
3082 }
3083
3084 /**
3085  * do_otp_lock - [DEFAULT] Lock OTP block area
3086  * @param mtd           MTD device structure
3087  * @param from          The offset to lock
3088  * @param len           number of bytes to lock
3089  * @param retlen        pointer to variable to store the number of lock bytes
3090  * @param buf           the databuffer to put/get data
3091  *
3092  * Lock OTP block area.
3093  */
3094 static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len,
3095                 size_t *retlen, u_char *buf)
3096 {
3097         struct onenand_chip *this = mtd->priv;
3098         struct mtd_oob_ops ops;
3099         int ret;
3100
3101         if (FLEXONENAND(this)) {
3102
3103                 /* Enter OTP access mode */
3104                 this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
3105                 this->wait(mtd, FL_OTPING);
3106                 /*
3107                  * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of
3108                  * main area of page 49.
3109                  */
3110                 ops.len = mtd->writesize;
3111                 ops.ooblen = 0;
3112                 ops.datbuf = buf;
3113                 ops.oobbuf = NULL;
3114                 ret = onenand_write_ops_nolock(mtd, mtd->writesize * 49, &ops);
3115                 *retlen = ops.retlen;
3116
3117                 /* Exit OTP access mode */
3118                 this->command(mtd, ONENAND_CMD_RESET, 0, 0);
3119                 this->wait(mtd, FL_RESETING);
3120         } else {
3121                 ops.mode = MTD_OOB_PLACE;
3122                 ops.ooblen = len;
3123                 ops.oobbuf = buf;
3124                 ops.ooboffs = 0;
3125                 ret = onenand_otp_write_oob_nolock(mtd, from, &ops);
3126                 *retlen = ops.oobretlen;
3127         }
3128
3129         return ret;
3130 }
3131
3132 /**
3133  * onenand_otp_walk - [DEFAULT] Handle OTP operation
3134  * @param mtd           MTD device structure
3135  * @param from          The offset to read/write
3136  * @param len           number of bytes to read/write
3137  * @param retlen        pointer to variable to store the number of read bytes
3138  * @param buf           the databuffer to put/get data
3139  * @param action        do given action
3140  * @param mode          specify user and factory
3141  *
3142  * Handle OTP operation.
3143  */
3144 static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len,
3145                         size_t *retlen, u_char *buf,
3146                         otp_op_t action, int mode)
3147 {
3148         struct onenand_chip *this = mtd->priv;
3149         int otp_pages;
3150         int density;
3151         int ret = 0;
3152
3153         *retlen = 0;
3154
3155         density = onenand_get_density(this->device_id);
3156         if (density < ONENAND_DEVICE_DENSITY_512Mb)
3157                 otp_pages = 20;
3158         else
3159                 otp_pages = 50;
3160
3161         if (mode == MTD_OTP_FACTORY) {
3162                 from += mtd->writesize * otp_pages;
3163                 otp_pages = ONENAND_PAGES_PER_BLOCK - otp_pages;
3164         }
3165
3166         /* Check User/Factory boundary */
3167         if (mode == MTD_OTP_USER) {
3168                 if (mtd->writesize * otp_pages < from + len)
3169                         return 0;
3170         } else {
3171                 if (mtd->writesize * otp_pages <  len)
3172                         return 0;
3173         }
3174
3175         onenand_get_device(mtd, FL_OTPING);
3176         while (len > 0 && otp_pages > 0) {
3177                 if (!action) {  /* OTP Info functions */
3178                         struct otp_info *otpinfo;
3179
3180                         len -= sizeof(struct otp_info);
3181                         if (len <= 0) {
3182                                 ret = -ENOSPC;
3183                                 break;
3184                         }
3185
3186                         otpinfo = (struct otp_info *) buf;
3187                         otpinfo->start = from;
3188                         otpinfo->length = mtd->writesize;
3189                         otpinfo->locked = 0;
3190
3191                         from += mtd->writesize;
3192                         buf += sizeof(struct otp_info);
3193                         *retlen += sizeof(struct otp_info);
3194                 } else {
3195                         size_t tmp_retlen;
3196
3197                         ret = action(mtd, from, len, &tmp_retlen, buf);
3198
3199                         buf += tmp_retlen;
3200                         len -= tmp_retlen;
3201                         *retlen += tmp_retlen;
3202
3203                         if (ret)
3204                                 break;
3205                 }
3206                 otp_pages--;
3207         }
3208         onenand_release_device(mtd);
3209
3210         return ret;
3211 }
3212
3213 /**
3214  * onenand_get_fact_prot_info - [MTD Interface] Read factory OTP info
3215  * @param mtd           MTD device structure
3216  * @param buf           the databuffer to put/get data
3217  * @param len           number of bytes to read
3218  *
3219  * Read factory OTP info.
3220  */
3221 static int onenand_get_fact_prot_info(struct mtd_info *mtd,
3222                         struct otp_info *buf, size_t len)
3223 {
3224         size_t retlen;
3225         int ret;
3226
3227         ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_FACTORY);
3228
3229         return ret ? : retlen;
3230 }
3231
3232 /**
3233  * onenand_read_fact_prot_reg - [MTD Interface] Read factory OTP area
3234  * @param mtd           MTD device structure
3235  * @param from          The offset to read
3236  * @param len           number of bytes to read
3237  * @param retlen        pointer to variable to store the number of read bytes
3238  * @param buf           the databuffer to put/get data
3239  *
3240  * Read factory OTP area.
3241  */
3242 static int onenand_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
3243                         size_t len, size_t *retlen, u_char *buf)
3244 {
3245         return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_read, MTD_OTP_FACTORY);
3246 }
3247
3248 /**
3249  * onenand_get_user_prot_info - [MTD Interface] Read user OTP info
3250  * @param mtd           MTD device structure
3251  * @param buf           the databuffer to put/get data
3252  * @param len           number of bytes to read
3253  *
3254  * Read user OTP info.
3255  */
3256 static int onenand_get_user_prot_info(struct mtd_info *mtd,
3257                         struct otp_info *buf, size_t len)
3258 {
3259         size_t retlen;
3260         int ret;
3261
3262         ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_USER);
3263
3264         return ret ? : retlen;
3265 }
3266
3267 /**
3268  * onenand_read_user_prot_reg - [MTD Interface] Read user OTP area
3269  * @param mtd           MTD device structure
3270  * @param from          The offset to read
3271  * @param len           number of bytes to read
3272  * @param retlen        pointer to variable to store the number of read bytes
3273  * @param buf           the databuffer to put/get data
3274  *
3275  * Read user OTP area.
3276  */
3277 static int onenand_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
3278                         size_t len, size_t *retlen, u_char *buf)
3279 {
3280         return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_read, MTD_OTP_USER);
3281 }
3282
3283 /**
3284  * onenand_write_user_prot_reg - [MTD Interface] Write user OTP area
3285  * @param mtd           MTD device structure
3286  * @param from          The offset to write
3287  * @param len           number of bytes to write
3288  * @param retlen        pointer to variable to store the number of write bytes
3289  * @param buf           the databuffer to put/get data
3290  *
3291  * Write user OTP area.
3292  */
3293 static int onenand_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
3294                         size_t len, size_t *retlen, u_char *buf)
3295 {
3296         return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_write, MTD_OTP_USER);
3297 }
3298
3299 /**
3300  * onenand_lock_user_prot_reg - [MTD Interface] Lock user OTP area
3301  * @param mtd           MTD device structure
3302  * @param from          The offset to lock
3303  * @param len           number of bytes to unlock
3304  *
3305  * Write lock mark on spare area in page 0 in OTP block
3306  */
3307 static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
3308                         size_t len)
3309 {
3310         struct onenand_chip *this = mtd->priv;
3311         u_char *buf = FLEXONENAND(this) ? this->page_buf : this->oob_buf;
3312         size_t retlen;
3313         int ret;
3314         unsigned int otp_lock_offset = ONENAND_OTP_LOCK_OFFSET;
3315
3316         memset(buf, 0xff, FLEXONENAND(this) ? this->writesize
3317                                                  : mtd->oobsize);
3318         /*
3319          * Write lock mark to 8th word of sector0 of page0 of the spare0.
3320          * We write 16 bytes spare area instead of 2 bytes.
3321          * For Flex-OneNAND, we write lock mark to 1st word of sector 4 of
3322          * main area of page 49.
3323          */
3324
3325         from = 0;
3326         len = FLEXONENAND(this) ? mtd->writesize : 16;
3327
3328         /*
3329          * Note: OTP lock operation
3330          *       OTP block : 0xXXFC                     XX 1111 1100
3331          *       1st block : 0xXXF3 (If chip support)   XX 1111 0011
3332          *       Both      : 0xXXF0 (If chip support)   XX 1111 0000
3333          */
3334         if (FLEXONENAND(this))
3335                 otp_lock_offset = FLEXONENAND_OTP_LOCK_OFFSET;
3336
3337         /* ONENAND_OTP_AREA | ONENAND_OTP_BLOCK0 | ONENAND_OTP_AREA_BLOCK0 */
3338         if (otp == 1)
3339                 buf[otp_lock_offset] = 0xFC;
3340         else if (otp == 2)
3341                 buf[otp_lock_offset] = 0xF3;
3342         else if (otp == 3)
3343                 buf[otp_lock_offset] = 0xF0;
3344         else if (otp != 0)
3345                 printk(KERN_DEBUG "[OneNAND] Invalid option selected for OTP\n");
3346
3347         ret = onenand_otp_walk(mtd, from, len, &retlen, buf, do_otp_lock, MTD_OTP_USER);
3348
3349         return ret ? : retlen;
3350 }
3351
3352 #endif  /* CONFIG_MTD_ONENAND_OTP */
3353
3354 /**
3355  * onenand_check_features - Check and set OneNAND features
3356  * @param mtd           MTD data structure
3357  *
3358  * Check and set OneNAND features
3359  * - lock scheme
3360  * - two plane
3361  */
3362 static void onenand_check_features(struct mtd_info *mtd)
3363 {
3364         struct onenand_chip *this = mtd->priv;
3365         unsigned int density, process;
3366
3367         /* Lock scheme depends on density and process */
3368         density = onenand_get_density(this->device_id);
3369         process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT;
3370
3371         /* Lock scheme */
3372         switch (density) {
3373         case ONENAND_DEVICE_DENSITY_4Gb:
3374                 if (ONENAND_IS_DDP(this))
3375                         this->options |= ONENAND_HAS_2PLANE;
3376                 else
3377                         this->options |= ONENAND_HAS_4KB_PAGE;
3378
3379         case ONENAND_DEVICE_DENSITY_2Gb:
3380                 /* 2Gb DDP does not have 2 plane */
3381                 if (!ONENAND_IS_DDP(this))
3382                         this->options |= ONENAND_HAS_2PLANE;
3383                 this->options |= ONENAND_HAS_UNLOCK_ALL;
3384
3385         case ONENAND_DEVICE_DENSITY_1Gb:
3386                 /* A-Die has all block unlock */
3387                 if (process)
3388                         this->options |= ONENAND_HAS_UNLOCK_ALL;
3389                 break;
3390
3391         default:
3392                 /* Some OneNAND has continuous lock scheme */
3393                 if (!process)
3394                         this->options |= ONENAND_HAS_CONT_LOCK;
3395                 break;
3396         }
3397
3398         if (ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this))
3399                 this->options &= ~ONENAND_HAS_2PLANE;
3400
3401         if (FLEXONENAND(this)) {
3402                 this->options &= ~ONENAND_HAS_CONT_LOCK;
3403                 this->options |= ONENAND_HAS_UNLOCK_ALL;
3404         }
3405
3406         if (this->options & ONENAND_HAS_CONT_LOCK)
3407                 printk(KERN_DEBUG "Lock scheme is Continuous Lock\n");
3408         if (this->options & ONENAND_HAS_UNLOCK_ALL)
3409                 printk(KERN_DEBUG "Chip support all block unlock\n");
3410         if (this->options & ONENAND_HAS_2PLANE)
3411                 printk(KERN_DEBUG "Chip has 2 plane\n");
3412         if (this->options & ONENAND_HAS_4KB_PAGE)
3413                 printk(KERN_DEBUG "Chip has 4KiB pagesize\n");
3414 }
3415
3416 /**
3417  * onenand_print_device_info - Print device & version ID
3418  * @param device        device ID
3419  * @param version       version ID
3420  *
3421  * Print device & version ID
3422  */
3423 static void onenand_print_device_info(int device, int version)
3424 {
3425         int vcc, demuxed, ddp, density, flexonenand;
3426
3427         vcc = device & ONENAND_DEVICE_VCC_MASK;
3428         demuxed = device & ONENAND_DEVICE_IS_DEMUX;
3429         ddp = device & ONENAND_DEVICE_IS_DDP;
3430         density = onenand_get_density(device);
3431         flexonenand = device & DEVICE_IS_FLEXONENAND;
3432         printk(KERN_INFO "%s%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n",
3433                 demuxed ? "" : "Muxed ",
3434                 flexonenand ? "Flex-" : "",
3435                 ddp ? "(DDP)" : "",
3436                 (16 << density),
3437                 vcc ? "2.65/3.3" : "1.8",
3438                 device);
3439         printk(KERN_INFO "OneNAND version = 0x%04x\n", version);
3440 }
3441
3442 static const struct onenand_manufacturers onenand_manuf_ids[] = {
3443         {ONENAND_MFR_SAMSUNG, "Samsung"},
3444         {ONENAND_MFR_NUMONYX, "Numonyx"},
3445 };
3446
3447 /**
3448  * onenand_check_maf - Check manufacturer ID
3449  * @param manuf         manufacturer ID
3450  *
3451  * Check manufacturer ID
3452  */
3453 static int onenand_check_maf(int manuf)
3454 {
3455         int size = ARRAY_SIZE(onenand_manuf_ids);
3456         char *name;
3457         int i;
3458
3459         for (i = 0; i < size; i++)
3460                 if (manuf == onenand_manuf_ids[i].id)
3461                         break;
3462
3463         if (i < size)
3464                 name = onenand_manuf_ids[i].name;
3465         else
3466                 name = "Unknown";
3467
3468         printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n", name, manuf);
3469
3470         return (i == size);
3471 }
3472
3473 /**
3474 * flexonenand_get_boundary      - Reads the SLC boundary
3475 * @param onenand_info           - onenand info structure
3476 **/
3477 static int flexonenand_get_boundary(struct mtd_info *mtd)
3478 {
3479         struct onenand_chip *this = mtd->priv;
3480         unsigned die, bdry;
3481         int ret, syscfg, locked;
3482
3483         /* Disable ECC */
3484         syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
3485         this->write_word((syscfg | 0x0100), this->base + ONENAND_REG_SYS_CFG1);
3486
3487         for (die = 0; die < this->dies; die++) {
3488                 this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0);
3489                 this->wait(mtd, FL_SYNCING);
3490
3491                 this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
3492                 ret = this->wait(mtd, FL_READING);
3493
3494                 bdry = this->read_word(this->base + ONENAND_DATARAM);
3495                 if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3)
3496                         locked = 0;
3497                 else
3498                         locked = 1;
3499                 this->boundary[die] = bdry & FLEXONENAND_PI_MASK;
3500
3501                 this->command(mtd, ONENAND_CMD_RESET, 0, 0);
3502                 ret = this->wait(mtd, FL_RESETING);
3503
3504                 printk(KERN_INFO "Die %d boundary: %d%s\n", die,
3505                        this->boundary[die], locked ? "(Locked)" : "(Unlocked)");
3506         }
3507
3508         /* Enable ECC */
3509         this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
3510         return 0;
3511 }
3512
3513 /**
3514  * flexonenand_get_size - Fill up fields in onenand_chip and mtd_info
3515  *                        boundary[], diesize[], mtd->size, mtd->erasesize
3516  * @param mtd           - MTD device structure
3517  */
3518 static void flexonenand_get_size(struct mtd_info *mtd)
3519 {
3520         struct onenand_chip *this = mtd->priv;
3521         int die, i, eraseshift, density;
3522         int blksperdie, maxbdry;
3523         loff_t ofs;
3524
3525         density = onenand_get_density(this->device_id);
3526         blksperdie = ((loff_t)(16 << density) << 20) >> (this->erase_shift);
3527         blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
3528         maxbdry = blksperdie - 1;
3529         eraseshift = this->erase_shift - 1;
3530
3531         mtd->numeraseregions = this->dies << 1;
3532
3533         /* This fills up the device boundary */
3534         flexonenand_get_boundary(mtd);
3535         die = ofs = 0;
3536         i = -1;
3537         for (; die < this->dies; die++) {
3538                 if (!die || this->boundary[die-1] != maxbdry) {
3539                         i++;
3540                         mtd->eraseregions[i].offset = ofs;
3541                         mtd->eraseregions[i].erasesize = 1 << eraseshift;
3542                         mtd->eraseregions[i].numblocks =
3543                                                         this->boundary[die] + 1;
3544                         ofs += mtd->eraseregions[i].numblocks << eraseshift;
3545                         eraseshift++;
3546                 } else {
3547                         mtd->numeraseregions -= 1;
3548                         mtd->eraseregions[i].numblocks +=
3549                                                         this->boundary[die] + 1;
3550                         ofs += (this->boundary[die] + 1) << (eraseshift - 1);
3551                 }
3552                 if (this->boundary[die] != maxbdry) {
3553                         i++;
3554                         mtd->eraseregions[i].offset = ofs;
3555                         mtd->eraseregions[i].erasesize = 1 << eraseshift;
3556                         mtd->eraseregions[i].numblocks = maxbdry ^
3557                                                          this->boundary[die];
3558                         ofs += mtd->eraseregions[i].numblocks << eraseshift;
3559                         eraseshift--;
3560                 } else
3561                         mtd->numeraseregions -= 1;
3562         }
3563
3564         /* Expose MLC erase size except when all blocks are SLC */
3565         mtd->erasesize = 1 << this->erase_shift;
3566         if (mtd->numeraseregions == 1)
3567                 mtd->erasesize >>= 1;
3568
3569         printk(KERN_INFO "Device has %d eraseregions\n", mtd->numeraseregions);
3570         for (i = 0; i < mtd->numeraseregions; i++)
3571                 printk(KERN_INFO "[offset: 0x%08x, erasesize: 0x%05x,"
3572                         " numblocks: %04u]\n",
3573                         (unsigned int) mtd->eraseregions[i].offset,
3574                         mtd->eraseregions[i].erasesize,
3575                         mtd->eraseregions[i].numblocks);
3576
3577         for (die = 0, mtd->size = 0; die < this->dies; die++) {
3578                 this->diesize[die] = (loff_t)blksperdie << this->erase_shift;
3579                 this->diesize[die] -= (loff_t)(this->boundary[die] + 1)
3580                                                  << (this->erase_shift - 1);
3581                 mtd->size += this->diesize[die];
3582         }
3583 }
3584
3585 /**
3586  * flexonenand_check_blocks_erased - Check if blocks are erased
3587  * @param mtd_info      - mtd info structure
3588  * @param start         - first erase block to check
3589  * @param end           - last erase block to check
3590  *
3591  * Converting an unerased block from MLC to SLC
3592  * causes byte values to change. Since both data and its ECC
3593  * have changed, reads on the block give uncorrectable error.
3594  * This might lead to the block being detected as bad.
3595  *
3596  * Avoid this by ensuring that the block to be converted is
3597  * erased.
3598  */
3599 static int flexonenand_check_blocks_erased(struct mtd_info *mtd, int start, int end)
3600 {
3601         struct onenand_chip *this = mtd->priv;
3602         int i, ret;
3603         int block;
3604         struct mtd_oob_ops ops = {
3605                 .mode = MTD_OOB_PLACE,
3606                 .ooboffs = 0,
3607                 .ooblen = mtd->oobsize,
3608                 .datbuf = NULL,
3609                 .oobbuf = this->oob_buf,
3610         };
3611         loff_t addr;
3612
3613         printk(KERN_DEBUG "Check blocks from %d to %d\n", start, end);
3614
3615         for (block = start; block <= end; block++) {
3616                 addr = flexonenand_addr(this, block);
3617                 if (onenand_block_isbad_nolock(mtd, addr, 0))
3618                         continue;
3619
3620                 /*
3621                  * Since main area write results in ECC write to spare,
3622                  * it is sufficient to check only ECC bytes for change.
3623                  */
3624                 ret = onenand_read_oob_nolock(mtd, addr, &ops);
3625                 if (ret)
3626                         return ret;
3627
3628                 for (i = 0; i < mtd->oobsize; i++)
3629                         if (this->oob_buf[i] != 0xff)
3630                                 break;
3631
3632                 if (i != mtd->oobsize) {
3633                         printk(KERN_WARNING "%s: Block %d not erased.\n",
3634                                 __func__, block);
3635                         return 1;
3636                 }
3637         }
3638
3639         return 0;
3640 }
3641
3642 /**
3643  * flexonenand_set_boundary     - Writes the SLC boundary
3644  * @param mtd                   - mtd info structure
3645  */
3646 int flexonenand_set_boundary(struct mtd_info *mtd, int die,
3647                                     int boundary, int lock)
3648 {
3649         struct onenand_chip *this = mtd->priv;
3650         int ret, density, blksperdie, old, new, thisboundary;
3651         loff_t addr;
3652
3653         /* Change only once for SDP Flex-OneNAND */
3654         if (die && (!ONENAND_IS_DDP(this)))
3655                 return 0;
3656
3657         /* boundary value of -1 indicates no required change */
3658         if (boundary < 0 || boundary == this->boundary[die])
3659                 return 0;
3660
3661         density = onenand_get_density(this->device_id);
3662         blksperdie = ((16 << density) << 20) >> this->erase_shift;
3663         blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0;
3664
3665         if (boundary >= blksperdie) {
3666                 printk(KERN_ERR "%s: Invalid boundary value. "
3667                                 "Boundary not changed.\n", __func__);
3668                 return -EINVAL;
3669         }
3670
3671         /* Check if converting blocks are erased */
3672         old = this->boundary[die] + (die * this->density_mask);
3673         new = boundary + (die * this->density_mask);
3674         ret = flexonenand_check_blocks_erased(mtd, min(old, new) + 1, max(old, new));
3675         if (ret) {
3676                 printk(KERN_ERR "%s: Please erase blocks "
3677                                 "before boundary change\n", __func__);
3678                 return ret;
3679         }
3680
3681         this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0);
3682         this->wait(mtd, FL_SYNCING);
3683
3684         /* Check is boundary is locked */
3685         this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
3686         ret = this->wait(mtd, FL_READING);
3687
3688         thisboundary = this->read_word(this->base + ONENAND_DATARAM);
3689         if ((thisboundary >> FLEXONENAND_PI_UNLOCK_SHIFT) != 3) {
3690                 printk(KERN_ERR "%s: boundary locked\n", __func__);
3691                 ret = 1;
3692                 goto out;
3693         }
3694
3695         printk(KERN_INFO "Changing die %d boundary: %d%s\n",
3696                         die, boundary, lock ? "(Locked)" : "(Unlocked)");
3697
3698         addr = die ? this->diesize[0] : 0;
3699
3700         boundary &= FLEXONENAND_PI_MASK;
3701         boundary |= lock ? 0 : (3 << FLEXONENAND_PI_UNLOCK_SHIFT);
3702
3703         this->command(mtd, ONENAND_CMD_ERASE, addr, 0);
3704         ret = this->wait(mtd, FL_ERASING);
3705         if (ret) {
3706                 printk(KERN_ERR "%s: Failed PI erase for Die %d\n",
3707                        __func__, die);
3708                 goto out;
3709         }
3710
3711         this->write_word(boundary, this->base + ONENAND_DATARAM);
3712         this->command(mtd, ONENAND_CMD_PROG, addr, 0);
3713         ret = this->wait(mtd, FL_WRITING);
3714         if (ret) {
3715                 printk(KERN_ERR "%s: Failed PI write for Die %d\n",
3716                         __func__, die);
3717                 goto out;
3718         }
3719
3720         this->command(mtd, FLEXONENAND_CMD_PI_UPDATE, die, 0);
3721         ret = this->wait(mtd, FL_WRITING);
3722 out:
3723         this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_REG_COMMAND);
3724         this->wait(mtd, FL_RESETING);
3725         if (!ret)
3726                 /* Recalculate device size on boundary change*/
3727                 flexonenand_get_size(mtd);
3728
3729         return ret;
3730 }
3731
3732 /**
3733  * onenand_probe - [OneNAND Interface] Probe the OneNAND device
3734  * @param mtd           MTD device structure
3735  *
3736  * OneNAND detection method:
3737  *   Compare the values from command with ones from register
3738  */
3739 static int onenand_probe(struct mtd_info *mtd)
3740 {
3741         struct onenand_chip *this = mtd->priv;
3742         int bram_maf_id, bram_dev_id, maf_id, dev_id, ver_id;
3743         int density;
3744         int syscfg;
3745
3746         /* Save system configuration 1 */
3747         syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
3748         /* Clear Sync. Burst Read mode to read BootRAM */
3749         this->write_word((syscfg & ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE), this->base + ONENAND_REG_SYS_CFG1);
3750
3751         /* Send the command for reading device ID from BootRAM */
3752         this->write_word(ONENAND_CMD_READID, this->base + ONENAND_BOOTRAM);
3753
3754         /* Read manufacturer and device IDs from BootRAM */
3755         bram_maf_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x0);
3756         bram_dev_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x2);
3757
3758         /* Reset OneNAND to read default register values */
3759         this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_BOOTRAM);
3760         /* Wait reset */
3761         this->wait(mtd, FL_RESETING);
3762
3763         /* Restore system configuration 1 */
3764         this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
3765
3766         /* Workaround */
3767         if (syscfg & ONENAND_SYS_CFG1_SYNC_WRITE) {
3768                 bram_maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
3769                 bram_dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
3770         }
3771
3772         /* Check manufacturer ID */
3773         if (onenand_check_maf(bram_maf_id))
3774                 return -ENXIO;
3775
3776         /* Read manufacturer and device IDs from Register */
3777         maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
3778         dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
3779         ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
3780         this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY);
3781
3782         /* Check OneNAND device */
3783         if (maf_id != bram_maf_id || dev_id != bram_dev_id)
3784                 return -ENXIO;
3785
3786         /* Flash device information */
3787         onenand_print_device_info(dev_id, ver_id);
3788         this->device_id = dev_id;
3789         this->version_id = ver_id;
3790
3791         /* Check OneNAND features */
3792         onenand_check_features(mtd);
3793
3794         density = onenand_get_density(dev_id);
3795         if (FLEXONENAND(this)) {
3796                 this->dies = ONENAND_IS_DDP(this) ? 2 : 1;
3797                 /* Maximum possible erase regions */
3798                 mtd->numeraseregions = this->dies << 1;
3799                 mtd->eraseregions = kzalloc(sizeof(struct mtd_erase_region_info)
3800                                         * (this->dies << 1), GFP_KERNEL);
3801                 if (!mtd->eraseregions)
3802                         return -ENOMEM;
3803         }
3804
3805         /*
3806          * For Flex-OneNAND, chipsize represents maximum possible device size.
3807          * mtd->size represents the actual device size.
3808          */
3809         this->chipsize = (16 << density) << 20;
3810
3811         /* OneNAND page size & block size */
3812         /* The data buffer size is equal to page size */
3813         mtd->writesize = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
3814         /* We use the full BufferRAM */
3815         if (ONENAND_IS_MLC(this) || ONENAND_IS_4KB_PAGE(this))
3816                 mtd->writesize <<= 1;
3817
3818         mtd->oobsize = mtd->writesize >> 5;
3819         /* Pages per a block are always 64 in OneNAND */
3820         mtd->erasesize = mtd->writesize << 6;
3821         /*
3822          * Flex-OneNAND SLC area has 64 pages per block.
3823          * Flex-OneNAND MLC area has 128 pages per block.
3824          * Expose MLC erase size to find erase_shift and page_mask.
3825          */
3826         if (FLEXONENAND(this))
3827                 mtd->erasesize <<= 1;
3828
3829         this->erase_shift = ffs(mtd->erasesize) - 1;
3830         this->page_shift = ffs(mtd->writesize) - 1;
3831         this->page_mask = (1 << (this->erase_shift - this->page_shift)) - 1;
3832         /* Set density mask. it is used for DDP */
3833         if (ONENAND_IS_DDP(this))
3834                 this->density_mask = this->chipsize >> (this->erase_shift + 1);
3835         /* It's real page size */
3836         this->writesize = mtd->writesize;
3837
3838         /* REVISIT: Multichip handling */
3839
3840         if (FLEXONENAND(this))
3841                 flexonenand_get_size(mtd);
3842         else
3843                 mtd->size = this->chipsize;
3844
3845         /*
3846          * We emulate the 4KiB page and 256KiB erase block size
3847          * But oobsize is still 64 bytes.
3848          * It is only valid if you turn on 2X program support,
3849          * Otherwise it will be ignored by compiler.
3850          */
3851         if (ONENAND_IS_2PLANE(this)) {
3852                 mtd->writesize <<= 1;
3853                 mtd->erasesize <<= 1;
3854         }
3855
3856         return 0;
3857 }
3858
3859 /**
3860  * onenand_suspend - [MTD Interface] Suspend the OneNAND flash
3861  * @param mtd           MTD device structure
3862  */
3863 static int onenand_suspend(struct mtd_info *mtd)
3864 {
3865         return onenand_get_device(mtd, FL_PM_SUSPENDED);
3866 }
3867
3868 /**
3869  * onenand_resume - [MTD Interface] Resume the OneNAND flash
3870  * @param mtd           MTD device structure
3871  */
3872 static void onenand_resume(struct mtd_info *mtd)
3873 {
3874         struct onenand_chip *this = mtd->priv;
3875
3876         if (this->state == FL_PM_SUSPENDED)
3877                 onenand_release_device(mtd);
3878         else
3879                 printk(KERN_ERR "%s: resume() called for the chip which is not "
3880                                 "in suspended state\n", __func__);
3881 }
3882
3883 /**
3884  * onenand_scan - [OneNAND Interface] Scan for the OneNAND device
3885  * @param mtd           MTD device structure
3886  * @param maxchips      Number of chips to scan for
3887  *
3888  * This fills out all the not initialized function pointers
3889  * with the defaults.
3890  * The flash ID is read and the mtd/chip structures are
3891  * filled with the appropriate values.
3892  */
3893 int onenand_scan(struct mtd_info *mtd, int maxchips)
3894 {
3895         int i, ret;
3896         struct onenand_chip *this = mtd->priv;
3897
3898         if (!this->read_word)
3899                 this->read_word = onenand_readw;
3900         if (!this->write_word)
3901                 this->write_word = onenand_writew;
3902
3903         if (!this->command)
3904                 this->command = onenand_command;
3905         if (!this->wait)
3906                 onenand_setup_wait(mtd);
3907         if (!this->bbt_wait)
3908                 this->bbt_wait = onenand_bbt_wait;
3909         if (!this->unlock_all)
3910                 this->unlock_all = onenand_unlock_all;
3911
3912         if (!this->read_bufferram)
3913                 this->read_bufferram = onenand_read_bufferram;
3914         if (!this->write_bufferram)
3915                 this->write_bufferram = onenand_write_bufferram;
3916
3917         if (!this->block_markbad)
3918                 this->block_markbad = onenand_default_block_markbad;
3919         if (!this->scan_bbt)
3920                 this->scan_bbt = onenand_default_bbt;
3921
3922         if (onenand_probe(mtd))
3923                 return -ENXIO;
3924
3925         /* Set Sync. Burst Read after probing */
3926         if (this->mmcontrol) {
3927                 printk(KERN_INFO "OneNAND Sync. Burst Read support\n");
3928                 this->read_bufferram = onenand_sync_read_bufferram;
3929         }
3930
3931         /* Allocate buffers, if necessary */
3932         if (!this->page_buf) {
3933                 this->page_buf = kzalloc(mtd->writesize, GFP_KERNEL);
3934                 if (!this->page_buf) {
3935                         printk(KERN_ERR "%s: Can't allocate page_buf\n",
3936                                 __func__);
3937                         return -ENOMEM;
3938                 }
3939 #ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
3940                 this->verify_buf = kzalloc(mtd->writesize, GFP_KERNEL);
3941                 if (!this->verify_buf) {
3942                         kfree(this->page_buf);
3943                         return -ENOMEM;
3944                 }
3945 #endif
3946                 this->options |= ONENAND_PAGEBUF_ALLOC;
3947         }
3948         if (!this->oob_buf) {
3949                 this->oob_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
3950                 if (!this->oob_buf) {
3951                         printk(KERN_ERR "%s: Can't allocate oob_buf\n",
3952                                 __func__);
3953                         if (this->options & ONENAND_PAGEBUF_ALLOC) {
3954                                 this->options &= ~ONENAND_PAGEBUF_ALLOC;
3955                                 kfree(this->page_buf);
3956                         }
3957                         return -ENOMEM;
3958                 }
3959                 this->options |= ONENAND_OOBBUF_ALLOC;
3960         }
3961
3962         this->state = FL_READY;
3963         init_waitqueue_head(&this->wq);
3964         spin_lock_init(&this->chip_lock);
3965
3966         /*
3967          * Allow subpage writes up to oobsize.
3968          */
3969         switch (mtd->oobsize) {
3970         case 128:
3971                 this->ecclayout = &onenand_oob_128;
3972                 mtd->subpage_sft = 0;
3973                 break;
3974         case 64:
3975                 this->ecclayout = &onenand_oob_64;
3976                 mtd->subpage_sft = 2;
3977                 break;
3978
3979         case 32:
3980                 this->ecclayout = &onenand_oob_32;
3981                 mtd->subpage_sft = 1;
3982                 break;
3983
3984         default:
3985                 printk(KERN_WARNING "%s: No OOB scheme defined for oobsize %d\n",
3986                         __func__, mtd->oobsize);
3987                 mtd->subpage_sft = 0;
3988                 /* To prevent kernel oops */
3989                 this->ecclayout = &onenand_oob_32;
3990                 break;
3991         }
3992
3993         this->subpagesize = mtd->writesize >> mtd->subpage_sft;
3994
3995         /*
3996          * The number of bytes available for a client to place data into
3997          * the out of band area
3998          */
3999         this->ecclayout->oobavail = 0;
4000         for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES &&
4001             this->ecclayout->oobfree[i].length; i++)
4002                 this->ecclayout->oobavail +=
4003                         this->ecclayout->oobfree[i].length;
4004         mtd->oobavail = this->ecclayout->oobavail;
4005
4006         mtd->ecclayout = this->ecclayout;
4007
4008         /* Fill in remaining MTD driver data */
4009         mtd->type = MTD_NANDFLASH;
4010         mtd->flags = MTD_CAP_NANDFLASH;
4011         mtd->erase = onenand_erase;
4012         mtd->point = NULL;
4013         mtd->unpoint = NULL;
4014         mtd->read = onenand_read;
4015         mtd->write = onenand_write;
4016         mtd->read_oob = onenand_read_oob;
4017         mtd->write_oob = onenand_write_oob;
4018         mtd->panic_write = onenand_panic_write;
4019 #ifdef CONFIG_MTD_ONENAND_OTP
4020         mtd->get_fact_prot_info = onenand_get_fact_prot_info;
4021         mtd->read_fact_prot_reg = onenand_read_fact_prot_reg;
4022         mtd->get_user_prot_info = onenand_get_user_prot_info;
4023         mtd->read_user_prot_reg = onenand_read_user_prot_reg;
4024         mtd->write_user_prot_reg = onenand_write_user_prot_reg;
4025         mtd->lock_user_prot_reg = onenand_lock_user_prot_reg;
4026 #endif
4027         mtd->sync = onenand_sync;
4028         mtd->lock = onenand_lock;
4029         mtd->unlock = onenand_unlock;
4030         mtd->suspend = onenand_suspend;
4031         mtd->resume = onenand_resume;
4032         mtd->block_isbad = onenand_block_isbad;
4033         mtd->block_markbad = onenand_block_markbad;
4034         mtd->owner = THIS_MODULE;
4035
4036         /* Unlock whole block */
4037         this->unlock_all(mtd);
4038
4039         ret = this->scan_bbt(mtd);
4040         if ((!FLEXONENAND(this)) || ret)
4041                 return ret;
4042
4043         /* Change Flex-OneNAND boundaries if required */
4044         for (i = 0; i < MAX_DIES; i++)
4045                 flexonenand_set_boundary(mtd, i, flex_bdry[2 * i],
4046                                                  flex_bdry[(2 * i) + 1]);
4047
4048         return 0;
4049 }
4050
4051 /**
4052  * onenand_release - [OneNAND Interface] Free resources held by the OneNAND device
4053  * @param mtd           MTD device structure
4054  */
4055 void onenand_release(struct mtd_info *mtd)
4056 {
4057         struct onenand_chip *this = mtd->priv;
4058
4059 #ifdef CONFIG_MTD_PARTITIONS
4060         /* Deregister partitions */
4061         del_mtd_partitions (mtd);
4062 #endif
4063         /* Deregister the device */
4064         del_mtd_device (mtd);
4065
4066         /* Free bad block table memory, if allocated */
4067         if (this->bbm) {
4068                 struct bbm_info *bbm = this->bbm;
4069                 kfree(bbm->bbt);
4070                 kfree(this->bbm);
4071         }
4072         /* Buffers allocated by onenand_scan */
4073         if (this->options & ONENAND_PAGEBUF_ALLOC) {
4074                 kfree(this->page_buf);
4075 #ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
4076                 kfree(this->verify_buf);
4077 #endif
4078         }
4079         if (this->options & ONENAND_OOBBUF_ALLOC)
4080                 kfree(this->oob_buf);
4081         kfree(mtd->eraseregions);
4082 }
4083
4084 EXPORT_SYMBOL_GPL(onenand_scan);
4085 EXPORT_SYMBOL_GPL(onenand_release);
4086
4087 MODULE_LICENSE("GPL");
4088 MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
4089 MODULE_DESCRIPTION("Generic OneNAND flash driver code");