2 * A V4L2 driver for OmniVision OV7670 cameras.
4 * Copyright 2006 One Laptop Per Child Association, Inc. Written
5 * by Jonathan Corbet with substantial inspiration from Mark
6 * McClelland's ovcamchip code.
8 * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
10 * This file may be distributed under the terms of the GNU General
11 * Public License, version 2.
13 #include <linux/init.h>
14 #include <linux/module.h>
15 #include <linux/slab.h>
16 #include <linux/i2c.h>
17 #include <linux/delay.h>
18 #include <linux/videodev2.h>
19 #include <media/v4l2-device.h>
20 #include <media/v4l2-chip-ident.h>
21 #include <media/v4l2-mediabus.h>
24 MODULE_AUTHOR("Jonathan Corbet <corbet@lwn.net>");
25 MODULE_DESCRIPTION("A low-level driver for OmniVision ov7670 sensors");
26 MODULE_LICENSE("GPL");
29 module_param(debug, bool, 0644);
30 MODULE_PARM_DESC(debug, "Debug level (0-1)");
33 * Basic window sizes. These probably belong somewhere more globally
37 #define VGA_HEIGHT 480
38 #define QVGA_WIDTH 320
39 #define QVGA_HEIGHT 240
41 #define CIF_HEIGHT 288
42 #define QCIF_WIDTH 176
43 #define QCIF_HEIGHT 144
46 * Our nominal (default) frame rate.
48 #define OV7670_FRAME_RATE 30
51 * The 7670 sits on i2c with ID 0x42
53 #define OV7670_I2C_ADDR 0x42
56 #define REG_GAIN 0x00 /* Gain lower 8 bits (rest in vref) */
57 #define REG_BLUE 0x01 /* blue gain */
58 #define REG_RED 0x02 /* red gain */
59 #define REG_VREF 0x03 /* Pieces of GAIN, VSTART, VSTOP */
60 #define REG_COM1 0x04 /* Control 1 */
61 #define COM1_CCIR656 0x40 /* CCIR656 enable */
62 #define REG_BAVE 0x05 /* U/B Average level */
63 #define REG_GbAVE 0x06 /* Y/Gb Average level */
64 #define REG_AECHH 0x07 /* AEC MS 5 bits */
65 #define REG_RAVE 0x08 /* V/R Average level */
66 #define REG_COM2 0x09 /* Control 2 */
67 #define COM2_SSLEEP 0x10 /* Soft sleep mode */
68 #define REG_PID 0x0a /* Product ID MSB */
69 #define REG_VER 0x0b /* Product ID LSB */
70 #define REG_COM3 0x0c /* Control 3 */
71 #define COM3_SWAP 0x40 /* Byte swap */
72 #define COM3_SCALEEN 0x08 /* Enable scaling */
73 #define COM3_DCWEN 0x04 /* Enable downsamp/crop/window */
74 #define REG_COM4 0x0d /* Control 4 */
75 #define REG_COM5 0x0e /* All "reserved" */
76 #define REG_COM6 0x0f /* Control 6 */
77 #define REG_AECH 0x10 /* More bits of AEC value */
78 #define REG_CLKRC 0x11 /* Clocl control */
79 #define CLK_EXT 0x40 /* Use external clock directly */
80 #define CLK_SCALE 0x3f /* Mask for internal clock scale */
81 #define REG_COM7 0x12 /* Control 7 */
82 #define COM7_RESET 0x80 /* Register reset */
83 #define COM7_FMT_MASK 0x38
84 #define COM7_FMT_VGA 0x00
85 #define COM7_FMT_CIF 0x20 /* CIF format */
86 #define COM7_FMT_QVGA 0x10 /* QVGA format */
87 #define COM7_FMT_QCIF 0x08 /* QCIF format */
88 #define COM7_RGB 0x04 /* bits 0 and 2 - RGB format */
89 #define COM7_YUV 0x00 /* YUV */
90 #define COM7_BAYER 0x01 /* Bayer format */
91 #define COM7_PBAYER 0x05 /* "Processed bayer" */
92 #define REG_COM8 0x13 /* Control 8 */
93 #define COM8_FASTAEC 0x80 /* Enable fast AGC/AEC */
94 #define COM8_AECSTEP 0x40 /* Unlimited AEC step size */
95 #define COM8_BFILT 0x20 /* Band filter enable */
96 #define COM8_AGC 0x04 /* Auto gain enable */
97 #define COM8_AWB 0x02 /* White balance enable */
98 #define COM8_AEC 0x01 /* Auto exposure enable */
99 #define REG_COM9 0x14 /* Control 9 - gain ceiling */
100 #define REG_COM10 0x15 /* Control 10 */
101 #define COM10_HSYNC 0x40 /* HSYNC instead of HREF */
102 #define COM10_PCLK_HB 0x20 /* Suppress PCLK on horiz blank */
103 #define COM10_HREF_REV 0x08 /* Reverse HREF */
104 #define COM10_VS_LEAD 0x04 /* VSYNC on clock leading edge */
105 #define COM10_VS_NEG 0x02 /* VSYNC negative */
106 #define COM10_HS_NEG 0x01 /* HSYNC negative */
107 #define REG_HSTART 0x17 /* Horiz start high bits */
108 #define REG_HSTOP 0x18 /* Horiz stop high bits */
109 #define REG_VSTART 0x19 /* Vert start high bits */
110 #define REG_VSTOP 0x1a /* Vert stop high bits */
111 #define REG_PSHFT 0x1b /* Pixel delay after HREF */
112 #define REG_MIDH 0x1c /* Manuf. ID high */
113 #define REG_MIDL 0x1d /* Manuf. ID low */
114 #define REG_MVFP 0x1e /* Mirror / vflip */
115 #define MVFP_MIRROR 0x20 /* Mirror image */
116 #define MVFP_FLIP 0x10 /* Vertical flip */
118 #define REG_AEW 0x24 /* AGC upper limit */
119 #define REG_AEB 0x25 /* AGC lower limit */
120 #define REG_VPT 0x26 /* AGC/AEC fast mode op region */
121 #define REG_HSYST 0x30 /* HSYNC rising edge delay */
122 #define REG_HSYEN 0x31 /* HSYNC falling edge delay */
123 #define REG_HREF 0x32 /* HREF pieces */
124 #define REG_TSLB 0x3a /* lots of stuff */
125 #define TSLB_YLAST 0x04 /* UYVY or VYUY - see com13 */
126 #define REG_COM11 0x3b /* Control 11 */
127 #define COM11_NIGHT 0x80 /* NIght mode enable */
128 #define COM11_NMFR 0x60 /* Two bit NM frame rate */
129 #define COM11_HZAUTO 0x10 /* Auto detect 50/60 Hz */
130 #define COM11_50HZ 0x08 /* Manual 50Hz select */
131 #define COM11_EXP 0x02
132 #define REG_COM12 0x3c /* Control 12 */
133 #define COM12_HREF 0x80 /* HREF always */
134 #define REG_COM13 0x3d /* Control 13 */
135 #define COM13_GAMMA 0x80 /* Gamma enable */
136 #define COM13_UVSAT 0x40 /* UV saturation auto adjustment */
137 #define COM13_UVSWAP 0x01 /* V before U - w/TSLB */
138 #define REG_COM14 0x3e /* Control 14 */
139 #define COM14_DCWEN 0x10 /* DCW/PCLK-scale enable */
140 #define REG_EDGE 0x3f /* Edge enhancement factor */
141 #define REG_COM15 0x40 /* Control 15 */
142 #define COM15_R10F0 0x00 /* Data range 10 to F0 */
143 #define COM15_R01FE 0x80 /* 01 to FE */
144 #define COM15_R00FF 0xc0 /* 00 to FF */
145 #define COM15_RGB565 0x10 /* RGB565 output */
146 #define COM15_RGB555 0x30 /* RGB555 output */
147 #define REG_COM16 0x41 /* Control 16 */
148 #define COM16_AWBGAIN 0x08 /* AWB gain enable */
149 #define REG_COM17 0x42 /* Control 17 */
150 #define COM17_AECWIN 0xc0 /* AEC window - must match COM4 */
151 #define COM17_CBAR 0x08 /* DSP Color bar */
154 * This matrix defines how the colors are generated, must be
155 * tweaked to adjust hue and saturation.
157 * Order: v-red, v-green, v-blue, u-red, u-green, u-blue
159 * They are nine-bit signed quantities, with the sign bit
160 * stored in 0x58. Sign for v-red is bit 0, and up from there.
162 #define REG_CMATRIX_BASE 0x4f
163 #define CMATRIX_LEN 6
164 #define REG_CMATRIX_SIGN 0x58
167 #define REG_BRIGHT 0x55 /* Brightness */
168 #define REG_CONTRAS 0x56 /* Contrast control */
170 #define REG_GFIX 0x69 /* Fix gain control */
172 #define REG_REG76 0x76 /* OV's name */
173 #define R76_BLKPCOR 0x80 /* Black pixel correction enable */
174 #define R76_WHTPCOR 0x40 /* White pixel correction enable */
176 #define REG_RGB444 0x8c /* RGB 444 control */
177 #define R444_ENABLE 0x02 /* Turn on RGB444, overrides 5x5 */
178 #define R444_RGBX 0x01 /* Empty nibble at end */
180 #define REG_HAECC1 0x9f /* Hist AEC/AGC control 1 */
181 #define REG_HAECC2 0xa0 /* Hist AEC/AGC control 2 */
183 #define REG_BD50MAX 0xa5 /* 50hz banding step limit */
184 #define REG_HAECC3 0xa6 /* Hist AEC/AGC control 3 */
185 #define REG_HAECC4 0xa7 /* Hist AEC/AGC control 4 */
186 #define REG_HAECC5 0xa8 /* Hist AEC/AGC control 5 */
187 #define REG_HAECC6 0xa9 /* Hist AEC/AGC control 6 */
188 #define REG_HAECC7 0xaa /* Hist AEC/AGC control 7 */
189 #define REG_BD60MAX 0xab /* 60hz banding step limit */
193 * Information we maintain about a known sensor.
195 struct ov7670_format_struct; /* coming later */
197 struct v4l2_subdev sd;
198 struct ov7670_format_struct *fmt; /* Current format */
199 unsigned char sat; /* Saturation value */
200 int hue; /* Hue value */
201 u8 clkrc; /* Clock divider value */
204 static inline struct ov7670_info *to_state(struct v4l2_subdev *sd)
206 return container_of(sd, struct ov7670_info, sd);
212 * The default register settings, as obtained from OmniVision. There
213 * is really no making sense of most of these - lots of "reserved" values
216 * These settings give VGA YUYV.
220 unsigned char reg_num;
224 static struct regval_list ov7670_default_regs[] = {
225 { REG_COM7, COM7_RESET },
227 * Clock scale: 3 = 15fps
231 { REG_CLKRC, 0x1 }, /* OV: clock scale (30 fps) */
232 { REG_TSLB, 0x04 }, /* OV */
233 { REG_COM7, 0 }, /* VGA */
235 * Set the hardware window. These values from OV don't entirely
236 * make sense - hstop is less than hstart. But they work...
238 { REG_HSTART, 0x13 }, { REG_HSTOP, 0x01 },
239 { REG_HREF, 0xb6 }, { REG_VSTART, 0x02 },
240 { REG_VSTOP, 0x7a }, { REG_VREF, 0x0a },
242 { REG_COM3, 0 }, { REG_COM14, 0 },
243 /* Mystery scaling numbers */
244 { 0x70, 0x3a }, { 0x71, 0x35 },
245 { 0x72, 0x11 }, { 0x73, 0xf0 },
246 { 0xa2, 0x02 }, { REG_COM10, 0x0 },
248 /* Gamma curve values */
249 { 0x7a, 0x20 }, { 0x7b, 0x10 },
250 { 0x7c, 0x1e }, { 0x7d, 0x35 },
251 { 0x7e, 0x5a }, { 0x7f, 0x69 },
252 { 0x80, 0x76 }, { 0x81, 0x80 },
253 { 0x82, 0x88 }, { 0x83, 0x8f },
254 { 0x84, 0x96 }, { 0x85, 0xa3 },
255 { 0x86, 0xaf }, { 0x87, 0xc4 },
256 { 0x88, 0xd7 }, { 0x89, 0xe8 },
258 /* AGC and AEC parameters. Note we start by disabling those features,
259 then turn them only after tweaking the values. */
260 { REG_COM8, COM8_FASTAEC | COM8_AECSTEP | COM8_BFILT },
261 { REG_GAIN, 0 }, { REG_AECH, 0 },
262 { REG_COM4, 0x40 }, /* magic reserved bit */
263 { REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */
264 { REG_BD50MAX, 0x05 }, { REG_BD60MAX, 0x07 },
265 { REG_AEW, 0x95 }, { REG_AEB, 0x33 },
266 { REG_VPT, 0xe3 }, { REG_HAECC1, 0x78 },
267 { REG_HAECC2, 0x68 }, { 0xa1, 0x03 }, /* magic */
268 { REG_HAECC3, 0xd8 }, { REG_HAECC4, 0xd8 },
269 { REG_HAECC5, 0xf0 }, { REG_HAECC6, 0x90 },
270 { REG_HAECC7, 0x94 },
271 { REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC },
273 /* Almost all of these are magic "reserved" values. */
274 { REG_COM5, 0x61 }, { REG_COM6, 0x4b },
275 { 0x16, 0x02 }, { REG_MVFP, 0x07 },
276 { 0x21, 0x02 }, { 0x22, 0x91 },
277 { 0x29, 0x07 }, { 0x33, 0x0b },
278 { 0x35, 0x0b }, { 0x37, 0x1d },
279 { 0x38, 0x71 }, { 0x39, 0x2a },
280 { REG_COM12, 0x78 }, { 0x4d, 0x40 },
281 { 0x4e, 0x20 }, { REG_GFIX, 0 },
282 { 0x6b, 0x4a }, { 0x74, 0x10 },
283 { 0x8d, 0x4f }, { 0x8e, 0 },
284 { 0x8f, 0 }, { 0x90, 0 },
285 { 0x91, 0 }, { 0x96, 0 },
286 { 0x9a, 0 }, { 0xb0, 0x84 },
287 { 0xb1, 0x0c }, { 0xb2, 0x0e },
288 { 0xb3, 0x82 }, { 0xb8, 0x0a },
290 /* More reserved magic, some of which tweaks white balance */
291 { 0x43, 0x0a }, { 0x44, 0xf0 },
292 { 0x45, 0x34 }, { 0x46, 0x58 },
293 { 0x47, 0x28 }, { 0x48, 0x3a },
294 { 0x59, 0x88 }, { 0x5a, 0x88 },
295 { 0x5b, 0x44 }, { 0x5c, 0x67 },
296 { 0x5d, 0x49 }, { 0x5e, 0x0e },
297 { 0x6c, 0x0a }, { 0x6d, 0x55 },
298 { 0x6e, 0x11 }, { 0x6f, 0x9f }, /* "9e for advance AWB" */
299 { 0x6a, 0x40 }, { REG_BLUE, 0x40 },
301 { REG_COM8, COM8_FASTAEC|COM8_AECSTEP|COM8_BFILT|COM8_AGC|COM8_AEC|COM8_AWB },
303 /* Matrix coefficients */
304 { 0x4f, 0x80 }, { 0x50, 0x80 },
305 { 0x51, 0 }, { 0x52, 0x22 },
306 { 0x53, 0x5e }, { 0x54, 0x80 },
309 { REG_COM16, COM16_AWBGAIN }, { REG_EDGE, 0 },
310 { 0x75, 0x05 }, { 0x76, 0xe1 },
311 { 0x4c, 0 }, { 0x77, 0x01 },
312 { REG_COM13, 0xc3 }, { 0x4b, 0x09 },
313 { 0xc9, 0x60 }, { REG_COM16, 0x38 },
316 { 0x34, 0x11 }, { REG_COM11, COM11_EXP|COM11_HZAUTO },
317 { 0xa4, 0x88 }, { 0x96, 0 },
318 { 0x97, 0x30 }, { 0x98, 0x20 },
319 { 0x99, 0x30 }, { 0x9a, 0x84 },
320 { 0x9b, 0x29 }, { 0x9c, 0x03 },
321 { 0x9d, 0x4c }, { 0x9e, 0x3f },
324 /* Extra-weird stuff. Some sort of multiplexor register */
325 { 0x79, 0x01 }, { 0xc8, 0xf0 },
326 { 0x79, 0x0f }, { 0xc8, 0x00 },
327 { 0x79, 0x10 }, { 0xc8, 0x7e },
328 { 0x79, 0x0a }, { 0xc8, 0x80 },
329 { 0x79, 0x0b }, { 0xc8, 0x01 },
330 { 0x79, 0x0c }, { 0xc8, 0x0f },
331 { 0x79, 0x0d }, { 0xc8, 0x20 },
332 { 0x79, 0x09 }, { 0xc8, 0x80 },
333 { 0x79, 0x02 }, { 0xc8, 0xc0 },
334 { 0x79, 0x03 }, { 0xc8, 0x40 },
335 { 0x79, 0x05 }, { 0xc8, 0x30 },
338 { 0xff, 0xff }, /* END MARKER */
343 * Here we'll try to encapsulate the changes for just the output
346 * RGB656 and YUV422 come from OV; RGB444 is homebrewed.
348 * IMPORTANT RULE: the first entry must be for COM7, see ov7670_s_fmt for why.
352 static struct regval_list ov7670_fmt_yuv422[] = {
353 { REG_COM7, 0x0 }, /* Selects YUV mode */
354 { REG_RGB444, 0 }, /* No RGB444 please */
355 { REG_COM1, 0 }, /* CCIR601 */
356 { REG_COM15, COM15_R00FF },
357 { REG_COM9, 0x18 }, /* 4x gain ceiling; 0x8 is reserved bit */
358 { 0x4f, 0x80 }, /* "matrix coefficient 1" */
359 { 0x50, 0x80 }, /* "matrix coefficient 2" */
360 { 0x51, 0 }, /* vb */
361 { 0x52, 0x22 }, /* "matrix coefficient 4" */
362 { 0x53, 0x5e }, /* "matrix coefficient 5" */
363 { 0x54, 0x80 }, /* "matrix coefficient 6" */
364 { REG_COM13, COM13_GAMMA|COM13_UVSAT },
368 static struct regval_list ov7670_fmt_rgb565[] = {
369 { REG_COM7, COM7_RGB }, /* Selects RGB mode */
370 { REG_RGB444, 0 }, /* No RGB444 please */
371 { REG_COM1, 0x0 }, /* CCIR601 */
372 { REG_COM15, COM15_RGB565 },
373 { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */
374 { 0x4f, 0xb3 }, /* "matrix coefficient 1" */
375 { 0x50, 0xb3 }, /* "matrix coefficient 2" */
376 { 0x51, 0 }, /* vb */
377 { 0x52, 0x3d }, /* "matrix coefficient 4" */
378 { 0x53, 0xa7 }, /* "matrix coefficient 5" */
379 { 0x54, 0xe4 }, /* "matrix coefficient 6" */
380 { REG_COM13, COM13_GAMMA|COM13_UVSAT },
384 static struct regval_list ov7670_fmt_rgb444[] = {
385 { REG_COM7, COM7_RGB }, /* Selects RGB mode */
386 { REG_RGB444, R444_ENABLE }, /* Enable xxxxrrrr ggggbbbb */
387 { REG_COM1, 0x0 }, /* CCIR601 */
388 { REG_COM15, COM15_R01FE|COM15_RGB565 }, /* Data range needed? */
389 { REG_COM9, 0x38 }, /* 16x gain ceiling; 0x8 is reserved bit */
390 { 0x4f, 0xb3 }, /* "matrix coefficient 1" */
391 { 0x50, 0xb3 }, /* "matrix coefficient 2" */
392 { 0x51, 0 }, /* vb */
393 { 0x52, 0x3d }, /* "matrix coefficient 4" */
394 { 0x53, 0xa7 }, /* "matrix coefficient 5" */
395 { 0x54, 0xe4 }, /* "matrix coefficient 6" */
396 { REG_COM13, COM13_GAMMA|COM13_UVSAT|0x2 }, /* Magic rsvd bit */
400 static struct regval_list ov7670_fmt_raw[] = {
401 { REG_COM7, COM7_BAYER },
402 { REG_COM13, 0x08 }, /* No gamma, magic rsvd bit */
403 { REG_COM16, 0x3d }, /* Edge enhancement, denoise */
404 { REG_REG76, 0xe1 }, /* Pix correction, magic rsvd */
411 * Low-level register I/O.
413 * Note that there are two versions of these. On the XO 1, the
414 * i2c controller only does SMBUS, so that's what we use. The
415 * ov7670 is not really an SMBUS device, though, so the communication
416 * is not always entirely reliable.
418 #ifdef CONFIG_OLPC_XO_1
419 static int ov7670_read(struct v4l2_subdev *sd, unsigned char reg,
420 unsigned char *value)
422 struct i2c_client *client = v4l2_get_subdevdata(sd);
425 ret = i2c_smbus_read_byte_data(client, reg);
427 *value = (unsigned char)ret;
434 static int ov7670_write(struct v4l2_subdev *sd, unsigned char reg,
437 struct i2c_client *client = v4l2_get_subdevdata(sd);
438 int ret = i2c_smbus_write_byte_data(client, reg, value);
440 if (reg == REG_COM7 && (value & COM7_RESET))
441 msleep(5); /* Wait for reset to run */
445 #else /* ! CONFIG_OLPC_XO_1 */
447 * On most platforms, we'd rather do straight i2c I/O.
449 static int ov7670_read(struct v4l2_subdev *sd, unsigned char reg,
450 unsigned char *value)
452 struct i2c_client *client = v4l2_get_subdevdata(sd);
458 * Send out the register address...
460 msg.addr = client->addr;
464 ret = i2c_transfer(client->adapter, &msg, 1);
466 printk(KERN_ERR "Error %d on register write\n", ret);
470 * ...then read back the result.
472 msg.flags = I2C_M_RD;
473 ret = i2c_transfer(client->adapter, &msg, 1);
482 static int ov7670_write(struct v4l2_subdev *sd, unsigned char reg,
485 struct i2c_client *client = v4l2_get_subdevdata(sd);
487 unsigned char data[2] = { reg, value };
490 msg.addr = client->addr;
494 ret = i2c_transfer(client->adapter, &msg, 1);
497 if (reg == REG_COM7 && (value & COM7_RESET))
498 msleep(5); /* Wait for reset to run */
501 #endif /* CONFIG_OLPC_XO_1 */
505 * Write a list of register settings; ff/ff stops the process.
507 static int ov7670_write_array(struct v4l2_subdev *sd, struct regval_list *vals)
509 while (vals->reg_num != 0xff || vals->value != 0xff) {
510 int ret = ov7670_write(sd, vals->reg_num, vals->value);
520 * Stuff that knows about the sensor.
522 static int ov7670_reset(struct v4l2_subdev *sd, u32 val)
524 ov7670_write(sd, REG_COM7, COM7_RESET);
530 static int ov7670_init(struct v4l2_subdev *sd, u32 val)
532 return ov7670_write_array(sd, ov7670_default_regs);
537 static int ov7670_detect(struct v4l2_subdev *sd)
542 ret = ov7670_init(sd, 0);
545 ret = ov7670_read(sd, REG_MIDH, &v);
548 if (v != 0x7f) /* OV manuf. id. */
550 ret = ov7670_read(sd, REG_MIDL, &v);
556 * OK, we know we have an OmniVision chip...but which one?
558 ret = ov7670_read(sd, REG_PID, &v);
561 if (v != 0x76) /* PID + VER = 0x76 / 0x73 */
563 ret = ov7670_read(sd, REG_VER, &v);
566 if (v != 0x73) /* PID + VER = 0x76 / 0x73 */
573 * Store information about the video data format. The color matrix
574 * is deeply tied into the format, so keep the relevant values here.
575 * The magic matrix numbers come from OmniVision.
577 static struct ov7670_format_struct {
578 enum v4l2_mbus_pixelcode mbus_code;
579 enum v4l2_colorspace colorspace;
580 struct regval_list *regs;
581 int cmatrix[CMATRIX_LEN];
582 } ov7670_formats[] = {
584 .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8,
585 .colorspace = V4L2_COLORSPACE_JPEG,
586 .regs = ov7670_fmt_yuv422,
587 .cmatrix = { 128, -128, 0, -34, -94, 128 },
590 .mbus_code = V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE,
591 .colorspace = V4L2_COLORSPACE_SRGB,
592 .regs = ov7670_fmt_rgb444,
593 .cmatrix = { 179, -179, 0, -61, -176, 228 },
596 .mbus_code = V4L2_MBUS_FMT_RGB565_2X8_LE,
597 .colorspace = V4L2_COLORSPACE_SRGB,
598 .regs = ov7670_fmt_rgb565,
599 .cmatrix = { 179, -179, 0, -61, -176, 228 },
602 .mbus_code = V4L2_MBUS_FMT_SBGGR8_1X8,
603 .colorspace = V4L2_COLORSPACE_SRGB,
604 .regs = ov7670_fmt_raw,
605 .cmatrix = { 0, 0, 0, 0, 0, 0 },
608 #define N_OV7670_FMTS ARRAY_SIZE(ov7670_formats)
612 * Then there is the issue of window sizes. Try to capture the info here.
616 * QCIF mode is done (by OV) in a very strange way - it actually looks like
617 * VGA with weird scaling options - they do *not* use the canned QCIF mode
618 * which is allegedly provided by the sensor. So here's the weird register
621 static struct regval_list ov7670_qcif_regs[] = {
622 { REG_COM3, COM3_SCALEEN|COM3_DCWEN },
623 { REG_COM3, COM3_DCWEN },
624 { REG_COM14, COM14_DCWEN | 0x01},
640 static struct ov7670_win_size {
643 unsigned char com7_bit;
644 int hstart; /* Start/stop values for the camera. Note */
645 int hstop; /* that they do not always make complete */
646 int vstart; /* sense to humans, but evidently the sensor */
647 int vstop; /* will do the right thing... */
648 struct regval_list *regs; /* Regs to tweak */
650 } ov7670_win_sizes[] = {
654 .height = VGA_HEIGHT,
655 .com7_bit = COM7_FMT_VGA,
656 .hstart = 158, /* These values from */
657 .hstop = 14, /* Omnivision */
665 .height = CIF_HEIGHT,
666 .com7_bit = COM7_FMT_CIF,
667 .hstart = 170, /* Empirically determined */
676 .height = QVGA_HEIGHT,
677 .com7_bit = COM7_FMT_QVGA,
678 .hstart = 164, /* Empirically determined */
687 .height = QCIF_HEIGHT,
688 .com7_bit = COM7_FMT_VGA, /* see comment above */
689 .hstart = 456, /* Empirically determined */
693 .regs = ov7670_qcif_regs,
697 #define N_WIN_SIZES (ARRAY_SIZE(ov7670_win_sizes))
701 * Store a set of start/stop values into the camera.
703 static int ov7670_set_hw(struct v4l2_subdev *sd, int hstart, int hstop,
704 int vstart, int vstop)
709 * Horizontal: 11 bits, top 8 live in hstart and hstop. Bottom 3 of
710 * hstart are in href[2:0], bottom 3 of hstop in href[5:3]. There is
711 * a mystery "edge offset" value in the top two bits of href.
713 ret = ov7670_write(sd, REG_HSTART, (hstart >> 3) & 0xff);
714 ret += ov7670_write(sd, REG_HSTOP, (hstop >> 3) & 0xff);
715 ret += ov7670_read(sd, REG_HREF, &v);
716 v = (v & 0xc0) | ((hstop & 0x7) << 3) | (hstart & 0x7);
718 ret += ov7670_write(sd, REG_HREF, v);
720 * Vertical: similar arrangement, but only 10 bits.
722 ret += ov7670_write(sd, REG_VSTART, (vstart >> 2) & 0xff);
723 ret += ov7670_write(sd, REG_VSTOP, (vstop >> 2) & 0xff);
724 ret += ov7670_read(sd, REG_VREF, &v);
725 v = (v & 0xf0) | ((vstop & 0x3) << 2) | (vstart & 0x3);
727 ret += ov7670_write(sd, REG_VREF, v);
732 static int ov7670_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
733 enum v4l2_mbus_pixelcode *code)
735 if (index >= N_OV7670_FMTS)
738 *code = ov7670_formats[index].mbus_code;
742 static int ov7670_try_fmt_internal(struct v4l2_subdev *sd,
743 struct v4l2_mbus_framefmt *fmt,
744 struct ov7670_format_struct **ret_fmt,
745 struct ov7670_win_size **ret_wsize)
748 struct ov7670_win_size *wsize;
750 for (index = 0; index < N_OV7670_FMTS; index++)
751 if (ov7670_formats[index].mbus_code == fmt->code)
753 if (index >= N_OV7670_FMTS) {
754 /* default to first format */
756 fmt->code = ov7670_formats[0].mbus_code;
759 *ret_fmt = ov7670_formats + index;
761 * Fields: the OV devices claim to be progressive.
763 fmt->field = V4L2_FIELD_NONE;
765 * Round requested image size down to the nearest
766 * we support, but not below the smallest.
768 for (wsize = ov7670_win_sizes; wsize < ov7670_win_sizes + N_WIN_SIZES;
770 if (fmt->width >= wsize->width && fmt->height >= wsize->height)
772 if (wsize >= ov7670_win_sizes + N_WIN_SIZES)
773 wsize--; /* Take the smallest one */
774 if (ret_wsize != NULL)
777 * Note the size we'll actually handle.
779 fmt->width = wsize->width;
780 fmt->height = wsize->height;
781 fmt->colorspace = ov7670_formats[index].colorspace;
785 static int ov7670_try_mbus_fmt(struct v4l2_subdev *sd,
786 struct v4l2_mbus_framefmt *fmt)
788 return ov7670_try_fmt_internal(sd, fmt, NULL, NULL);
794 static int ov7670_s_mbus_fmt(struct v4l2_subdev *sd,
795 struct v4l2_mbus_framefmt *fmt)
797 struct ov7670_format_struct *ovfmt;
798 struct ov7670_win_size *wsize;
799 struct ov7670_info *info = to_state(sd);
803 ret = ov7670_try_fmt_internal(sd, fmt, &ovfmt, &wsize);
808 * COM7 is a pain in the ass, it doesn't like to be read then
809 * quickly written afterward. But we have everything we need
810 * to set it absolutely here, as long as the format-specific
811 * register sets list it first.
813 com7 = ovfmt->regs[0].value;
814 com7 |= wsize->com7_bit;
815 ov7670_write(sd, REG_COM7, com7);
817 * Now write the rest of the array. Also store start/stops
819 ov7670_write_array(sd, ovfmt->regs + 1);
820 ov7670_set_hw(sd, wsize->hstart, wsize->hstop, wsize->vstart,
824 ret = ov7670_write_array(sd, wsize->regs);
828 * If we're running RGB565, we must rewrite clkrc after setting
829 * the other parameters or the image looks poor. If we're *not*
830 * doing RGB565, we must not rewrite clkrc or the image looks
833 * (Update) Now that we retain clkrc state, we should be able
834 * to write it unconditionally, and that will make the frame
835 * rate persistent too.
838 ret = ov7670_write(sd, REG_CLKRC, info->clkrc);
843 * Implement G/S_PARM. There is a "high quality" mode we could try
844 * to do someday; for now, we just do the frame rate tweak.
846 static int ov7670_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
848 struct v4l2_captureparm *cp = &parms->parm.capture;
849 struct ov7670_info *info = to_state(sd);
851 if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
854 memset(cp, 0, sizeof(struct v4l2_captureparm));
855 cp->capability = V4L2_CAP_TIMEPERFRAME;
856 cp->timeperframe.numerator = 1;
857 cp->timeperframe.denominator = OV7670_FRAME_RATE;
858 if ((info->clkrc & CLK_EXT) == 0 && (info->clkrc & CLK_SCALE) > 1)
859 cp->timeperframe.denominator /= (info->clkrc & CLK_SCALE);
863 static int ov7670_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
865 struct v4l2_captureparm *cp = &parms->parm.capture;
866 struct v4l2_fract *tpf = &cp->timeperframe;
867 struct ov7670_info *info = to_state(sd);
870 if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
872 if (cp->extendedmode != 0)
875 if (tpf->numerator == 0 || tpf->denominator == 0)
876 div = 1; /* Reset to full rate */
878 div = (tpf->numerator*OV7670_FRAME_RATE)/tpf->denominator;
881 else if (div > CLK_SCALE)
883 info->clkrc = (info->clkrc & 0x80) | div;
885 tpf->denominator = OV7670_FRAME_RATE/div;
886 return ov7670_write(sd, REG_CLKRC, info->clkrc);
892 * Code for dealing with controls.
899 static int ov7670_store_cmatrix(struct v4l2_subdev *sd,
900 int matrix[CMATRIX_LEN])
903 unsigned char signbits = 0;
906 * Weird crap seems to exist in the upper part of
907 * the sign bits register, so let's preserve it.
909 ret = ov7670_read(sd, REG_CMATRIX_SIGN, &signbits);
912 for (i = 0; i < CMATRIX_LEN; i++) {
916 signbits |= (1 << i);
917 if (matrix[i] < -255)
920 raw = (-1 * matrix[i]) & 0xff;
926 raw = matrix[i] & 0xff;
928 ret += ov7670_write(sd, REG_CMATRIX_BASE + i, raw);
930 ret += ov7670_write(sd, REG_CMATRIX_SIGN, signbits);
936 * Hue also requires messing with the color matrix. It also requires
937 * trig functions, which tend not to be well supported in the kernel.
938 * So here is a simple table of sine values, 0-90 degrees, in steps
939 * of five degrees. Values are multiplied by 1000.
941 * The following naive approximate trig functions require an argument
942 * carefully limited to -180 <= theta <= 180.
945 static const int ov7670_sin_table[] = {
946 0, 87, 173, 258, 342, 422,
947 499, 573, 642, 707, 766, 819,
948 866, 906, 939, 965, 984, 996,
952 static int ov7670_sine(int theta)
962 sine = ov7670_sin_table[theta/SIN_STEP];
965 sine = 1000 - ov7670_sin_table[theta/SIN_STEP];
970 static int ov7670_cosine(int theta)
975 else if (theta < -180)
977 return ov7670_sine(theta);
983 static void ov7670_calc_cmatrix(struct ov7670_info *info,
984 int matrix[CMATRIX_LEN])
988 * Apply the current saturation setting first.
990 for (i = 0; i < CMATRIX_LEN; i++)
991 matrix[i] = (info->fmt->cmatrix[i]*info->sat) >> 7;
993 * Then, if need be, rotate the hue value.
995 if (info->hue != 0) {
996 int sinth, costh, tmpmatrix[CMATRIX_LEN];
998 memcpy(tmpmatrix, matrix, CMATRIX_LEN*sizeof(int));
999 sinth = ov7670_sine(info->hue);
1000 costh = ov7670_cosine(info->hue);
1002 matrix[0] = (matrix[3]*sinth + matrix[0]*costh)/1000;
1003 matrix[1] = (matrix[4]*sinth + matrix[1]*costh)/1000;
1004 matrix[2] = (matrix[5]*sinth + matrix[2]*costh)/1000;
1005 matrix[3] = (matrix[3]*costh - matrix[0]*sinth)/1000;
1006 matrix[4] = (matrix[4]*costh - matrix[1]*sinth)/1000;
1007 matrix[5] = (matrix[5]*costh - matrix[2]*sinth)/1000;
1013 static int ov7670_s_sat(struct v4l2_subdev *sd, int value)
1015 struct ov7670_info *info = to_state(sd);
1016 int matrix[CMATRIX_LEN];
1020 ov7670_calc_cmatrix(info, matrix);
1021 ret = ov7670_store_cmatrix(sd, matrix);
1025 static int ov7670_g_sat(struct v4l2_subdev *sd, __s32 *value)
1027 struct ov7670_info *info = to_state(sd);
1033 static int ov7670_s_hue(struct v4l2_subdev *sd, int value)
1035 struct ov7670_info *info = to_state(sd);
1036 int matrix[CMATRIX_LEN];
1039 if (value < -180 || value > 180)
1042 ov7670_calc_cmatrix(info, matrix);
1043 ret = ov7670_store_cmatrix(sd, matrix);
1048 static int ov7670_g_hue(struct v4l2_subdev *sd, __s32 *value)
1050 struct ov7670_info *info = to_state(sd);
1058 * Some weird registers seem to store values in a sign/magnitude format!
1060 static unsigned char ov7670_sm_to_abs(unsigned char v)
1062 if ((v & 0x80) == 0)
1064 return 128 - (v & 0x7f);
1068 static unsigned char ov7670_abs_to_sm(unsigned char v)
1072 return (128 - v) | 0x80;
1075 static int ov7670_s_brightness(struct v4l2_subdev *sd, int value)
1077 unsigned char com8 = 0, v;
1080 ov7670_read(sd, REG_COM8, &com8);
1082 ov7670_write(sd, REG_COM8, com8);
1083 v = ov7670_abs_to_sm(value);
1084 ret = ov7670_write(sd, REG_BRIGHT, v);
1088 static int ov7670_g_brightness(struct v4l2_subdev *sd, __s32 *value)
1090 unsigned char v = 0;
1091 int ret = ov7670_read(sd, REG_BRIGHT, &v);
1093 *value = ov7670_sm_to_abs(v);
1097 static int ov7670_s_contrast(struct v4l2_subdev *sd, int value)
1099 return ov7670_write(sd, REG_CONTRAS, (unsigned char) value);
1102 static int ov7670_g_contrast(struct v4l2_subdev *sd, __s32 *value)
1104 unsigned char v = 0;
1105 int ret = ov7670_read(sd, REG_CONTRAS, &v);
1111 static int ov7670_g_hflip(struct v4l2_subdev *sd, __s32 *value)
1114 unsigned char v = 0;
1116 ret = ov7670_read(sd, REG_MVFP, &v);
1117 *value = (v & MVFP_MIRROR) == MVFP_MIRROR;
1122 static int ov7670_s_hflip(struct v4l2_subdev *sd, int value)
1124 unsigned char v = 0;
1127 ret = ov7670_read(sd, REG_MVFP, &v);
1132 msleep(10); /* FIXME */
1133 ret += ov7670_write(sd, REG_MVFP, v);
1139 static int ov7670_g_vflip(struct v4l2_subdev *sd, __s32 *value)
1142 unsigned char v = 0;
1144 ret = ov7670_read(sd, REG_MVFP, &v);
1145 *value = (v & MVFP_FLIP) == MVFP_FLIP;
1150 static int ov7670_s_vflip(struct v4l2_subdev *sd, int value)
1152 unsigned char v = 0;
1155 ret = ov7670_read(sd, REG_MVFP, &v);
1160 msleep(10); /* FIXME */
1161 ret += ov7670_write(sd, REG_MVFP, v);
1166 * GAIN is split between REG_GAIN and REG_VREF[7:6]. If one believes
1167 * the data sheet, the VREF parts should be the most significant, but
1168 * experience shows otherwise. There seems to be little value in
1169 * messing with the VREF bits, so we leave them alone.
1171 static int ov7670_g_gain(struct v4l2_subdev *sd, __s32 *value)
1176 ret = ov7670_read(sd, REG_GAIN, &gain);
1181 static int ov7670_s_gain(struct v4l2_subdev *sd, int value)
1186 ret = ov7670_write(sd, REG_GAIN, value & 0xff);
1187 /* Have to turn off AGC as well */
1189 ret = ov7670_read(sd, REG_COM8, &com8);
1190 ret = ov7670_write(sd, REG_COM8, com8 & ~COM8_AGC);
1198 static int ov7670_g_autogain(struct v4l2_subdev *sd, __s32 *value)
1203 ret = ov7670_read(sd, REG_COM8, &com8);
1204 *value = (com8 & COM8_AGC) != 0;
1208 static int ov7670_s_autogain(struct v4l2_subdev *sd, int value)
1213 ret = ov7670_read(sd, REG_COM8, &com8);
1219 ret = ov7670_write(sd, REG_COM8, com8);
1225 * Exposure is spread all over the place: top 6 bits in AECHH, middle
1226 * 8 in AECH, and two stashed in COM1 just for the hell of it.
1228 static int ov7670_g_exp(struct v4l2_subdev *sd, __s32 *value)
1231 unsigned char com1, aech, aechh;
1233 ret = ov7670_read(sd, REG_COM1, &com1) +
1234 ov7670_read(sd, REG_AECH, &aech) +
1235 ov7670_read(sd, REG_AECHH, &aechh);
1236 *value = ((aechh & 0x3f) << 10) | (aech << 2) | (com1 & 0x03);
1240 static int ov7670_s_exp(struct v4l2_subdev *sd, int value)
1243 unsigned char com1, com8, aech, aechh;
1245 ret = ov7670_read(sd, REG_COM1, &com1) +
1246 ov7670_read(sd, REG_COM8, &com8);
1247 ov7670_read(sd, REG_AECHH, &aechh);
1251 com1 = (com1 & 0xfc) | (value & 0x03);
1252 aech = (value >> 2) & 0xff;
1253 aechh = (aechh & 0xc0) | ((value >> 10) & 0x3f);
1254 ret = ov7670_write(sd, REG_COM1, com1) +
1255 ov7670_write(sd, REG_AECH, aech) +
1256 ov7670_write(sd, REG_AECHH, aechh);
1257 /* Have to turn off AEC as well */
1259 ret = ov7670_write(sd, REG_COM8, com8 & ~COM8_AEC);
1264 * Tweak autoexposure.
1266 static int ov7670_g_autoexp(struct v4l2_subdev *sd, __s32 *value)
1270 enum v4l2_exposure_auto_type *atype = (enum v4l2_exposure_auto_type *) value;
1272 ret = ov7670_read(sd, REG_COM8, &com8);
1273 if (com8 & COM8_AEC)
1274 *atype = V4L2_EXPOSURE_AUTO;
1276 *atype = V4L2_EXPOSURE_MANUAL;
1280 static int ov7670_s_autoexp(struct v4l2_subdev *sd,
1281 enum v4l2_exposure_auto_type value)
1286 ret = ov7670_read(sd, REG_COM8, &com8);
1288 if (value == V4L2_EXPOSURE_AUTO)
1292 ret = ov7670_write(sd, REG_COM8, com8);
1299 static int ov7670_queryctrl(struct v4l2_subdev *sd,
1300 struct v4l2_queryctrl *qc)
1302 /* Fill in min, max, step and default value for these controls. */
1304 case V4L2_CID_BRIGHTNESS:
1305 return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
1306 case V4L2_CID_CONTRAST:
1307 return v4l2_ctrl_query_fill(qc, 0, 127, 1, 64);
1308 case V4L2_CID_VFLIP:
1309 case V4L2_CID_HFLIP:
1310 return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
1311 case V4L2_CID_SATURATION:
1312 return v4l2_ctrl_query_fill(qc, 0, 256, 1, 128);
1314 return v4l2_ctrl_query_fill(qc, -180, 180, 5, 0);
1316 return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
1317 case V4L2_CID_AUTOGAIN:
1318 return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
1319 case V4L2_CID_EXPOSURE:
1320 return v4l2_ctrl_query_fill(qc, 0, 65535, 1, 500);
1321 case V4L2_CID_EXPOSURE_AUTO:
1322 return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
1327 static int ov7670_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
1330 case V4L2_CID_BRIGHTNESS:
1331 return ov7670_g_brightness(sd, &ctrl->value);
1332 case V4L2_CID_CONTRAST:
1333 return ov7670_g_contrast(sd, &ctrl->value);
1334 case V4L2_CID_SATURATION:
1335 return ov7670_g_sat(sd, &ctrl->value);
1337 return ov7670_g_hue(sd, &ctrl->value);
1338 case V4L2_CID_VFLIP:
1339 return ov7670_g_vflip(sd, &ctrl->value);
1340 case V4L2_CID_HFLIP:
1341 return ov7670_g_hflip(sd, &ctrl->value);
1343 return ov7670_g_gain(sd, &ctrl->value);
1344 case V4L2_CID_AUTOGAIN:
1345 return ov7670_g_autogain(sd, &ctrl->value);
1346 case V4L2_CID_EXPOSURE:
1347 return ov7670_g_exp(sd, &ctrl->value);
1348 case V4L2_CID_EXPOSURE_AUTO:
1349 return ov7670_g_autoexp(sd, &ctrl->value);
1354 static int ov7670_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
1357 case V4L2_CID_BRIGHTNESS:
1358 return ov7670_s_brightness(sd, ctrl->value);
1359 case V4L2_CID_CONTRAST:
1360 return ov7670_s_contrast(sd, ctrl->value);
1361 case V4L2_CID_SATURATION:
1362 return ov7670_s_sat(sd, ctrl->value);
1364 return ov7670_s_hue(sd, ctrl->value);
1365 case V4L2_CID_VFLIP:
1366 return ov7670_s_vflip(sd, ctrl->value);
1367 case V4L2_CID_HFLIP:
1368 return ov7670_s_hflip(sd, ctrl->value);
1370 return ov7670_s_gain(sd, ctrl->value);
1371 case V4L2_CID_AUTOGAIN:
1372 return ov7670_s_autogain(sd, ctrl->value);
1373 case V4L2_CID_EXPOSURE:
1374 return ov7670_s_exp(sd, ctrl->value);
1375 case V4L2_CID_EXPOSURE_AUTO:
1376 return ov7670_s_autoexp(sd,
1377 (enum v4l2_exposure_auto_type) ctrl->value);
1382 static int ov7670_g_chip_ident(struct v4l2_subdev *sd,
1383 struct v4l2_dbg_chip_ident *chip)
1385 struct i2c_client *client = v4l2_get_subdevdata(sd);
1387 return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_OV7670, 0);
1390 #ifdef CONFIG_VIDEO_ADV_DEBUG
1391 static int ov7670_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
1393 struct i2c_client *client = v4l2_get_subdevdata(sd);
1394 unsigned char val = 0;
1397 if (!v4l2_chip_match_i2c_client(client, ®->match))
1399 if (!capable(CAP_SYS_ADMIN))
1401 ret = ov7670_read(sd, reg->reg & 0xff, &val);
1407 static int ov7670_s_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
1409 struct i2c_client *client = v4l2_get_subdevdata(sd);
1411 if (!v4l2_chip_match_i2c_client(client, ®->match))
1413 if (!capable(CAP_SYS_ADMIN))
1415 ov7670_write(sd, reg->reg & 0xff, reg->val & 0xff);
1420 /* ----------------------------------------------------------------------- */
1422 static const struct v4l2_subdev_core_ops ov7670_core_ops = {
1423 .g_chip_ident = ov7670_g_chip_ident,
1424 .g_ctrl = ov7670_g_ctrl,
1425 .s_ctrl = ov7670_s_ctrl,
1426 .queryctrl = ov7670_queryctrl,
1427 .reset = ov7670_reset,
1428 .init = ov7670_init,
1429 #ifdef CONFIG_VIDEO_ADV_DEBUG
1430 .g_register = ov7670_g_register,
1431 .s_register = ov7670_s_register,
1435 static const struct v4l2_subdev_video_ops ov7670_video_ops = {
1436 .enum_mbus_fmt = ov7670_enum_mbus_fmt,
1437 .try_mbus_fmt = ov7670_try_mbus_fmt,
1438 .s_mbus_fmt = ov7670_s_mbus_fmt,
1439 .s_parm = ov7670_s_parm,
1440 .g_parm = ov7670_g_parm,
1443 static const struct v4l2_subdev_ops ov7670_ops = {
1444 .core = &ov7670_core_ops,
1445 .video = &ov7670_video_ops,
1448 /* ----------------------------------------------------------------------- */
1450 static int ov7670_probe(struct i2c_client *client,
1451 const struct i2c_device_id *id)
1453 struct v4l2_subdev *sd;
1454 struct ov7670_info *info;
1457 info = kzalloc(sizeof(struct ov7670_info), GFP_KERNEL);
1461 v4l2_i2c_subdev_init(sd, client, &ov7670_ops);
1463 /* Make sure it's an ov7670 */
1464 ret = ov7670_detect(sd);
1466 v4l_dbg(1, debug, client,
1467 "chip found @ 0x%x (%s) is not an ov7670 chip.\n",
1468 client->addr << 1, client->adapter->name);
1472 v4l_info(client, "chip found @ 0x%02x (%s)\n",
1473 client->addr << 1, client->adapter->name);
1475 info->fmt = &ov7670_formats[0];
1476 info->sat = 128; /* Review this */
1477 info->clkrc = 1; /* 30fps */
1483 static int ov7670_remove(struct i2c_client *client)
1485 struct v4l2_subdev *sd = i2c_get_clientdata(client);
1487 v4l2_device_unregister_subdev(sd);
1488 kfree(to_state(sd));
1492 static const struct i2c_device_id ov7670_id[] = {
1496 MODULE_DEVICE_TABLE(i2c, ov7670_id);
1498 static struct i2c_driver ov7670_driver = {
1500 .owner = THIS_MODULE,
1503 .probe = ov7670_probe,
1504 .remove = ov7670_remove,
1505 .id_table = ov7670_id,
1508 static __init int init_ov7670(void)
1510 return i2c_add_driver(&ov7670_driver);
1513 static __exit void exit_ov7670(void)
1515 i2c_del_driver(&ov7670_driver);
1518 module_init(init_ov7670);
1519 module_exit(exit_ov7670);