drivers/media/video/em28xx/em28xx-cards.c

   1 /*
   2    em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
   3                     video capture devices
   4
   5    Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
   6                       Markus Rechberger <mrechberger@gmail.com>
   7                       Mauro Carvalho Chehab <mchehab@infradead.org>
   8                       Sascha Sommer <saschasommer@freenet.de>
   9
  10    This program is free software; you can redistribute it and/or modify
  11    it under the terms of the GNU General Public License as published by
  12    the Free Software Foundation; either version 2 of the License, or
  13    (at your option) any later version.
  14
  15    This program is distributed in the hope that it will be useful,
  16    but WITHOUT ANY WARRANTY; without even the implied warranty of
  17    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18    GNU General Public License for more details.
  19
  20    You should have received a copy of the GNU General Public License
  21    along with this program; if not, write to the Free Software
  22    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23  */
  24
  25 #include <linux/init.h>
  26 #include <linux/module.h>
  27 #include <linux/delay.h>
  28 #include <linux/i2c.h>
  29 #include <linux/usb.h>
  30 #include <media/tuner.h>
  31 #include <media/msp3400.h>
  32 #include <media/saa7115.h>
  33 #include <media/tvp5150.h>
  34 #include <media/tveeprom.h>
  35 #include <media/v4l2-common.h>
  36 #include <media/v4l2-chip-ident.h>
  37
  38 #include "em28xx.h"
  39
  40 static int tuner = -1;
  41 module_param(tuner, int, 0444);
  42 MODULE_PARM_DESC(tuner, "tuner type");
  43
  44 static unsigned int disable_ir;
  45 module_param(disable_ir, int, 0444);
  46 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
  47
  48 struct em28xx_hash_table {
  49         unsigned long hash;
  50         unsigned int  model;
  51         unsigned int  tuner;
  52 };
  53
  54 /*
  55  *  Reset sequences for analog/digital modes
  56  */
  57
  58 /* Reset for the most [analog] boards */
  59 static struct em28xx_reg_seq default_analog[] = {
  60         {EM28XX_R08_GPIO,       0x6d,   ~EM_GPIO_4,     10},
  61         {       -1,             -1,     -1,             -1},
  62 };
  63
  64 /* Reset for the most [digital] boards */
  65 static struct em28xx_reg_seq default_digital[] = {
  66         {EM28XX_R08_GPIO,       0x6e,   ~EM_GPIO_4,     10},
  67         {       -1,             -1,     -1,             -1},
  68 };
  69
  70 /* Board Hauppauge WinTV HVR 900 analog */
  71 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
  72         {EM28XX_R08_GPIO,       0x2d,   ~EM_GPIO_4,     10},
  73         {0x05,                  0xff,   0x10,           10},
  74         {  -1,                  -1,     -1,             -1},
  75 };
  76
  77 /* Board Hauppauge WinTV HVR 900 digital */
  78 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
  79         {EM28XX_R08_GPIO,       0x2e,   ~EM_GPIO_4,     10},
  80         {EM2880_R04_GPO,        0x04,   0x0f,           10},
  81         {EM2880_R04_GPO,        0x0c,   0x0f,           10},
  82         { -1,                   -1,     -1,             -1},
  83 };
  84
  85 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
  86 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
  87         {EM28XX_R08_GPIO,       0x69,   ~EM_GPIO_4,      10},
  88         {       -1,             -1,     -1,              -1},
  89 };
  90
  91 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
  92
  93 /* Board  - EM2870 Kworld 355u
  94    Analog - No input analog */
  95
  96 /* Callback for the most boards */
  97 static struct em28xx_reg_seq default_tuner_gpio[] = {
  98         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
  99         {EM28XX_R08_GPIO,       0,              EM_GPIO_4,      10},
 100         {EM28XX_R08_GPIO,       EM_GPIO_4,      EM_GPIO_4,      10},
 101         {  -1,                  -1,             -1,             -1},
 102 };
 103
 104 /* Pinnacle PCTV HD Mini (80e) GPIOs
 105    0-5: not used
 106    6:   demod reset, active low
 107    7:   LED on, active high */
 108 static struct em28xx_reg_seq em2874_pinnacle_80e_digital[] = {
 109         {EM28XX_R06_I2C_CLK,    0x45,   0xff,             10}, /*400 KHz*/
 110         {EM2874_R80_GPIO,       0x80,   0xff,             100},/*Demod reset*/
 111         {EM2874_R80_GPIO,       0xc0,   0xff,             10},
 112         {  -1,                  -1,     -1,               -1},
 113 };
 114
 115 /*
 116  *  Board definitions
 117  */
 118 struct em28xx_board em28xx_boards[] = {
 119         [EM2750_BOARD_UNKNOWN] = {
 120                 .name          = "Unknown EM2750/EM2751 webcam grabber",
 121                 .xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
 122                 .tuner_type    = TUNER_ABSENT,  /* This is a webcam */
 123                 .input         = { {
 124                         .type     = EM28XX_VMUX_COMPOSITE1,
 125                         .vmux     = 0,
 126                         .amux     = EM28XX_AMUX_VIDEO,
 127                 } },
 128         },
 129         [EM2800_BOARD_UNKNOWN] = {
 130                 .name         = "Unknown EM2800 video grabber",
 131                 .is_em2800    = 1,
 132                 .tda9887_conf = TDA9887_PRESENT,
 133                 .decoder      = EM28XX_SAA711X,
 134                 .tuner_type   = TUNER_ABSENT,
 135                 .input        = { {
 136                         .type     = EM28XX_VMUX_COMPOSITE1,
 137                         .vmux     = SAA7115_COMPOSITE0,
 138                         .amux     = EM28XX_AMUX_LINE_IN,
 139                 }, {
 140                         .type     = EM28XX_VMUX_SVIDEO,
 141                         .vmux     = SAA7115_SVIDEO3,
 142                         .amux     = EM28XX_AMUX_LINE_IN,
 143                 } },
 144         },
 145         [EM2820_BOARD_UNKNOWN] = {
 146                 .name          = "Unknown EM2750/28xx video grabber",
 147                 .tuner_type    = TUNER_ABSENT,
 148         },
 149         [EM2750_BOARD_DLCW_130] = {
 150                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
 151                 .name          = "Huaqi DLCW-130",
 152                 .valid         = EM28XX_BOARD_NOT_VALIDATED,
 153                 .xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
 154                 .tuner_type    = TUNER_ABSENT,  /* This is a webcam */
 155                 .input         = { {
 156                         .type     = EM28XX_VMUX_COMPOSITE1,
 157                         .vmux     = 0,
 158                         .amux     = EM28XX_AMUX_VIDEO,
 159                 } },
 160         },
 161         [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
 162                 .name         = "Kworld PVR TV 2800 RF",
 163                 .tuner_type   = TUNER_TEMIC_PAL,
 164                 .tda9887_conf = TDA9887_PRESENT,
 165                 .decoder      = EM28XX_SAA711X,
 166                 .input        = { {
 167                         .type     = EM28XX_VMUX_COMPOSITE1,
 168                         .vmux     = SAA7115_COMPOSITE0,
 169                         .amux     = EM28XX_AMUX_LINE_IN,
 170                 }, {
 171                         .type     = EM28XX_VMUX_SVIDEO,
 172                         .vmux     = SAA7115_SVIDEO3,
 173                         .amux     = EM28XX_AMUX_LINE_IN,
 174                 } },
 175         },
 176         [EM2820_BOARD_TERRATEC_CINERGY_250] = {
 177                 .name         = "Terratec Cinergy 250 USB",
 178                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 179                 .tda9887_conf = TDA9887_PRESENT,
 180                 .decoder      = EM28XX_SAA711X,
 181                 .input        = { {
 182                         .type     = EM28XX_VMUX_TELEVISION,
 183                         .vmux     = SAA7115_COMPOSITE2,
 184                         .amux     = EM28XX_AMUX_LINE_IN,
 185                 }, {
 186                         .type     = EM28XX_VMUX_COMPOSITE1,
 187                         .vmux     = SAA7115_COMPOSITE0,
 188                         .amux     = EM28XX_AMUX_LINE_IN,
 189                 }, {
 190                         .type     = EM28XX_VMUX_SVIDEO,
 191                         .vmux     = SAA7115_SVIDEO3,
 192                         .amux     = EM28XX_AMUX_LINE_IN,
 193                 } },
 194         },
 195         [EM2820_BOARD_PINNACLE_USB_2] = {
 196                 .name         = "Pinnacle PCTV USB 2",
 197                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 198                 .tda9887_conf = TDA9887_PRESENT,
 199                 .decoder      = EM28XX_SAA711X,
 200                 .input        = { {
 201                         .type     = EM28XX_VMUX_TELEVISION,
 202                         .vmux     = SAA7115_COMPOSITE2,
 203                         .amux     = EM28XX_AMUX_VIDEO,
 204                 }, {
 205                         .type     = EM28XX_VMUX_COMPOSITE1,
 206                         .vmux     = SAA7115_COMPOSITE0,
 207                         .amux     = EM28XX_AMUX_LINE_IN,
 208                 }, {
 209                         .type     = EM28XX_VMUX_SVIDEO,
 210                         .vmux     = SAA7115_SVIDEO3,
 211                         .amux     = EM28XX_AMUX_LINE_IN,
 212                 } },
 213         },
 214         [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
 215                 .name         = "Hauppauge WinTV USB 2",
 216                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 217                 .tda9887_conf = TDA9887_PRESENT |
 218                                 TDA9887_PORT1_ACTIVE|
 219                                 TDA9887_PORT2_ACTIVE,
 220                 .decoder      = EM28XX_TVP5150,
 221                 .has_msp34xx  = 1,
 222                 .input        = { {
 223                         .type     = EM28XX_VMUX_TELEVISION,
 224                         .vmux     = TVP5150_COMPOSITE0,
 225                         .amux     = MSP_INPUT_DEFAULT,
 226                 }, {
 227                         .type     = EM28XX_VMUX_SVIDEO,
 228                         .vmux     = TVP5150_SVIDEO,
 229                         .amux     = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
 230                                         MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
 231                 } },
 232         },
 233         [EM2820_BOARD_DLINK_USB_TV] = {
 234                 .name         = "D-Link DUB-T210 TV Tuner",
 235                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 236                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 237                 .tda9887_conf = TDA9887_PRESENT,
 238                 .decoder      = EM28XX_SAA711X,
 239                 .input        = { {
 240                         .type     = EM28XX_VMUX_TELEVISION,
 241                         .vmux     = SAA7115_COMPOSITE2,
 242                         .amux     = EM28XX_AMUX_LINE_IN,
 243                 }, {
 244                         .type     = EM28XX_VMUX_COMPOSITE1,
 245                         .vmux     = SAA7115_COMPOSITE0,
 246                         .amux     = EM28XX_AMUX_LINE_IN,
 247                 }, {
 248                         .type     = EM28XX_VMUX_SVIDEO,
 249                         .vmux     = SAA7115_SVIDEO3,
 250                         .amux     = EM28XX_AMUX_LINE_IN,
 251                 } },
 252         },
 253         [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
 254                 .name         = "Hercules Smart TV USB 2.0",
 255                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 256                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 257                 .tda9887_conf = TDA9887_PRESENT,
 258                 .decoder      = EM28XX_SAA711X,
 259                 .input        = { {
 260                         .type     = EM28XX_VMUX_TELEVISION,
 261                         .vmux     = SAA7115_COMPOSITE2,
 262                         .amux     = EM28XX_AMUX_LINE_IN,
 263                 }, {
 264                         .type     = EM28XX_VMUX_COMPOSITE1,
 265                         .vmux     = SAA7115_COMPOSITE0,
 266                         .amux     = EM28XX_AMUX_LINE_IN,
 267                 }, {
 268                         .type     = EM28XX_VMUX_SVIDEO,
 269                         .vmux     = SAA7115_SVIDEO3,
 270                         .amux     = EM28XX_AMUX_LINE_IN,
 271                 } },
 272         },
 273         [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
 274                 .name         = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
 275                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 276                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 277                 .tda9887_conf = TDA9887_PRESENT,
 278                 .decoder      = EM28XX_SAA711X,
 279                 .input        = { {
 280                         .type     = EM28XX_VMUX_TELEVISION,
 281                         .vmux     = SAA7115_COMPOSITE2,
 282                         .amux     = EM28XX_AMUX_VIDEO,
 283                 }, {
 284                         .type     = EM28XX_VMUX_COMPOSITE1,
 285                         .vmux     = SAA7115_COMPOSITE0,
 286                         .amux     = EM28XX_AMUX_LINE_IN,
 287                 }, {
 288                         .type     = EM28XX_VMUX_SVIDEO,
 289                         .vmux     = SAA7115_SVIDEO3,
 290                         .amux     = EM28XX_AMUX_LINE_IN,
 291                 } },
 292         },
 293         [EM2820_BOARD_GADMEI_UTV310] = {
 294                 .name         = "Gadmei UTV310",
 295                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 296                 .tuner_type   = TUNER_TNF_5335MF,
 297                 .tda9887_conf = TDA9887_PRESENT,
 298                 .decoder      = EM28XX_SAA711X,
 299                 .input        = { {
 300                         .type     = EM28XX_VMUX_TELEVISION,
 301                         .vmux     = SAA7115_COMPOSITE1,
 302                         .amux     = EM28XX_AMUX_LINE_IN,
 303                 }, {
 304                         .type     = EM28XX_VMUX_COMPOSITE1,
 305                         .vmux     = SAA7115_COMPOSITE0,
 306                         .amux     = EM28XX_AMUX_LINE_IN,
 307                 }, {
 308                         .type     = EM28XX_VMUX_SVIDEO,
 309                         .vmux     = SAA7115_SVIDEO3,
 310                         .amux     = EM28XX_AMUX_LINE_IN,
 311                 } },
 312         },
 313         [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
 314                 .name         = "Leadtek Winfast USB II Deluxe",
 315                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 316                 .tuner_type   = TUNER_PHILIPS_FM1216ME_MK3,
 317                 .tda9887_conf = TDA9887_PRESENT,
 318                 .decoder      = EM28XX_SAA711X,
 319                 .input        = { {
 320                         .type     = EM28XX_VMUX_TELEVISION,
 321                         .vmux     = SAA7115_COMPOSITE2,
 322                         .amux     = EM28XX_AMUX_VIDEO,
 323                 }, {
 324                         .type     = EM28XX_VMUX_COMPOSITE1,
 325                         .vmux     = SAA7115_COMPOSITE0,
 326                         .amux     = EM28XX_AMUX_LINE_IN,
 327                 }, {
 328                         .type     = EM28XX_VMUX_SVIDEO,
 329                         .vmux     = SAA7115_COMPOSITE0,
 330                         .amux     = EM28XX_AMUX_LINE_IN,
 331                 } },
 332         },
 333         [EM2820_BOARD_PINNACLE_DVC_100] = {
 334                 .name         = "Pinnacle Dazzle DVC 100",
 335                 .decoder      = EM28XX_SAA711X,
 336                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
 337                 .input        = { {
 338                         .type     = EM28XX_VMUX_COMPOSITE1,
 339                         .vmux     = SAA7115_COMPOSITE0,
 340                         .amux     = EM28XX_AMUX_LINE_IN,
 341                 }, {
 342                         .type     = EM28XX_VMUX_SVIDEO,
 343                         .vmux     = SAA7115_SVIDEO3,
 344                         .amux     = EM28XX_AMUX_LINE_IN,
 345                 } },
 346         },
 347         [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
 348                 .name         = "Videology 20K14XUSB USB2.0",
 349                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 350                 .tuner_type   = TUNER_ABSENT,   /* This is a webcam */
 351                 .input        = { {
 352                         .type     = EM28XX_VMUX_COMPOSITE1,
 353                         .vmux     = 0,
 354                         .amux     = EM28XX_AMUX_VIDEO,
 355                 } },
 356         },
 357         [EM2821_BOARD_PROLINK_PLAYTV_USB2] = {
 358                 .name         = "SIIG AVTuner-PVR/Prolink PlayTV USB 2.0",
 359                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 360                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,  /* unknown? */
 361                 .tda9887_conf = TDA9887_PRESENT,        /* unknown? */
 362                 .decoder      = EM28XX_SAA711X,
 363                 .input        = { {
 364                         .type     = EM28XX_VMUX_TELEVISION,
 365                         .vmux     = SAA7115_COMPOSITE2,
 366                         .amux     = EM28XX_AMUX_LINE_IN,
 367                 }, {
 368                         .type     = EM28XX_VMUX_COMPOSITE1,
 369                         .vmux     = SAA7115_COMPOSITE0,
 370                         .amux     = EM28XX_AMUX_LINE_IN,
 371                 }, {
 372                         .type     = EM28XX_VMUX_SVIDEO,
 373                         .vmux     = SAA7115_SVIDEO3,
 374                         .amux     = EM28XX_AMUX_LINE_IN,
 375                 } },
 376         },
 377         [EM2821_BOARD_SUPERCOMP_USB_2] = {
 378                 .name         = "Supercomp USB 2.0 TV",
 379                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 380                 .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
 381                 .tda9887_conf = TDA9887_PRESENT |
 382                                 TDA9887_PORT1_ACTIVE |
 383                                 TDA9887_PORT2_ACTIVE,
 384                 .decoder      = EM28XX_SAA711X,
 385                 .input        = { {
 386                         .type     = EM28XX_VMUX_TELEVISION,
 387                         .vmux     = SAA7115_COMPOSITE2,
 388                         .amux     = EM28XX_AMUX_LINE_IN,
 389                 }, {
 390                         .type     = EM28XX_VMUX_COMPOSITE1,
 391                         .vmux     = SAA7115_COMPOSITE0,
 392                         .amux     = EM28XX_AMUX_VIDEO,
 393                 }, {
 394                         .type     = EM28XX_VMUX_SVIDEO,
 395                         .vmux     = SAA7115_SVIDEO3,
 396                         .amux     = EM28XX_AMUX_LINE_IN,
 397                 } },
 398         },
 399         [EM2821_BOARD_USBGEAR_VD204] = {
 400                 .name         = "Usbgear VD204v9",
 401                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 402                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
 403                 .decoder      = EM28XX_SAA711X,
 404                 .input        = { {
 405                         .type  = EM28XX_VMUX_COMPOSITE1,
 406                         .vmux  = SAA7115_COMPOSITE0,
 407                         .amux  = EM28XX_AMUX_LINE_IN,
 408                 }, {
 409                         .type  = EM28XX_VMUX_SVIDEO,
 410                         .vmux  = SAA7115_SVIDEO3,
 411                         .amux  = EM28XX_AMUX_LINE_IN,
 412                 } },
 413         },
 414         [EM2860_BOARD_NETGMBH_CAM] = {
 415                 /* Beijing Huaqi Information Digital Technology Co., Ltd */
 416                 .name         = "NetGMBH Cam",
 417                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 418                 .tuner_type   = TUNER_ABSENT,   /* This is a webcam */
 419                 .input        = { {
 420                         .type     = EM28XX_VMUX_COMPOSITE1,
 421                         .vmux     = 0,
 422                         .amux     = EM28XX_AMUX_VIDEO,
 423                 } },
 424         },
 425         [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
 426                 .name         = "Typhoon DVD Maker",
 427                 .decoder      = EM28XX_SAA711X,
 428                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
 429                 .input        = { {
 430                         .type  = EM28XX_VMUX_COMPOSITE1,
 431                         .vmux  = SAA7115_COMPOSITE0,
 432                         .amux  = EM28XX_AMUX_LINE_IN,
 433                 }, {
 434                         .type  = EM28XX_VMUX_SVIDEO,
 435                         .vmux  = SAA7115_SVIDEO3,
 436                         .amux  = EM28XX_AMUX_LINE_IN,
 437                 } },
 438         },
 439         [EM2860_BOARD_GADMEI_UTV330] = {
 440                 .name         = "Gadmei UTV330",
 441                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 442                 .tuner_type   = TUNER_TNF_5335MF,
 443                 .tda9887_conf = TDA9887_PRESENT,
 444                 .decoder      = EM28XX_SAA711X,
 445                 .input        = { {
 446                         .type     = EM28XX_VMUX_TELEVISION,
 447                         .vmux     = SAA7115_COMPOSITE2,
 448                         .amux     = EM28XX_AMUX_VIDEO,
 449                 }, {
 450                         .type     = EM28XX_VMUX_COMPOSITE1,
 451                         .vmux     = SAA7115_COMPOSITE0,
 452                         .amux     = EM28XX_AMUX_LINE_IN,
 453                 }, {
 454                         .type     = EM28XX_VMUX_SVIDEO,
 455                         .vmux     = SAA7115_SVIDEO3,
 456                         .amux     = EM28XX_AMUX_LINE_IN,
 457                 } },
 458         },
 459         [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
 460                 .name         = "Terratec Cinergy A Hybrid XS",
 461                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 462                 .tuner_type   = TUNER_XC2028,
 463                 .tuner_gpio   = default_tuner_gpio,
 464                 .decoder      = EM28XX_TVP5150,
 465
 466                 .input        = { {
 467                         .type     = EM28XX_VMUX_TELEVISION,
 468                         .vmux     = TVP5150_COMPOSITE0,
 469                         .amux     = EM28XX_AMUX_VIDEO,
 470                         .gpio     = hauppauge_wintv_hvr_900_analog,
 471                 }, {
 472                         .type     = EM28XX_VMUX_COMPOSITE1,
 473                         .vmux     = TVP5150_COMPOSITE1,
 474                         .amux     = EM28XX_AMUX_LINE_IN,
 475                         .gpio     = hauppauge_wintv_hvr_900_analog,
 476                 }, {
 477                         .type     = EM28XX_VMUX_SVIDEO,
 478                         .vmux     = TVP5150_SVIDEO,
 479                         .amux     = EM28XX_AMUX_LINE_IN,
 480                         .gpio     = hauppauge_wintv_hvr_900_analog,
 481                 } },
 482         },
 483         [EM2861_BOARD_KWORLD_PVRTV_300U] = {
 484                 .name         = "KWorld PVRTV 300U",
 485                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 486                 .tuner_type   = TUNER_XC2028,
 487                 .tuner_gpio   = default_tuner_gpio,
 488                 .decoder      = EM28XX_TVP5150,
 489                 .input        = { {
 490                         .type     = EM28XX_VMUX_TELEVISION,
 491                         .vmux     = TVP5150_COMPOSITE0,
 492                         .amux     = EM28XX_AMUX_VIDEO,
 493                 }, {
 494                         .type     = EM28XX_VMUX_COMPOSITE1,
 495                         .vmux     = TVP5150_COMPOSITE1,
 496                         .amux     = EM28XX_AMUX_LINE_IN,
 497                 }, {
 498                         .type     = EM28XX_VMUX_SVIDEO,
 499                         .vmux     = TVP5150_SVIDEO,
 500                         .amux     = EM28XX_AMUX_LINE_IN,
 501                 } },
 502         },
 503         [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
 504                 .name          = "Yakumo MovieMixer",
 505                 .tuner_type   = TUNER_ABSENT,   /* Capture only device */
 506                 .decoder       = EM28XX_TVP5150,
 507                 .input         = { {
 508                         .type     = EM28XX_VMUX_TELEVISION,
 509                         .vmux     = TVP5150_COMPOSITE0,
 510                         .amux     = EM28XX_AMUX_VIDEO,
 511                 }, {
 512                         .type     = EM28XX_VMUX_COMPOSITE1,
 513                         .vmux     = TVP5150_COMPOSITE1,
 514                         .amux     = EM28XX_AMUX_LINE_IN,
 515                 }, {
 516                         .type     = EM28XX_VMUX_SVIDEO,
 517                         .vmux     = TVP5150_SVIDEO,
 518                         .amux     = EM28XX_AMUX_LINE_IN,
 519                 } },
 520         },
 521         [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
 522                 .name         = "Plextor ConvertX PX-TV100U",
 523                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 524                 .tuner_type   = TUNER_TNF_5335MF,
 525                 .tda9887_conf = TDA9887_PRESENT,
 526                 .decoder      = EM28XX_TVP5150,
 527                 .input        = { {
 528                         .type     = EM28XX_VMUX_TELEVISION,
 529                         .vmux     = TVP5150_COMPOSITE0,
 530                         .amux     = EM28XX_AMUX_LINE_IN,
 531                 }, {
 532                         .type     = EM28XX_VMUX_COMPOSITE1,
 533                         .vmux     = TVP5150_COMPOSITE1,
 534                         .amux     = EM28XX_AMUX_LINE_IN,
 535                 }, {
 536                         .type     = EM28XX_VMUX_SVIDEO,
 537                         .vmux     = TVP5150_SVIDEO,
 538                         .amux     = EM28XX_AMUX_LINE_IN,
 539                 } },
 540         },
 541
 542         /* Those boards with em2870 are DVB Only*/
 543
 544         [EM2870_BOARD_TERRATEC_XS] = {
 545                 .name         = "Terratec Cinergy T XS",
 546                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 547                 .tuner_type   = TUNER_XC2028,
 548                 .tuner_gpio   = default_tuner_gpio,
 549         },
 550         [EM2870_BOARD_TERRATEC_XS_MT2060] = {
 551                 .name         = "Terratec Cinergy T XS (MT2060)",
 552                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 553                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 554         },
 555         [EM2870_BOARD_KWORLD_350U] = {
 556                 .name         = "Kworld 350 U DVB-T",
 557                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 558                 .tuner_type   = TUNER_XC2028,
 559                 .tuner_gpio   = default_tuner_gpio,
 560         },
 561         [EM2870_BOARD_KWORLD_355U] = {
 562                 .name         = "Kworld 355 U DVB-T",
 563                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 564         },
 565         [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
 566                 .name         = "Pinnacle PCTV DVB-T",
 567                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 568                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 569                 /* djh - I have serious doubts this is right... */
 570                 .xclk         = EM28XX_XCLK_IR_RC5_MODE |
 571                                 EM28XX_XCLK_FREQUENCY_10MHZ,
 572         },
 573         [EM2870_BOARD_COMPRO_VIDEOMATE] = {
 574                 .name         = "Compro, VideoMate U3",
 575                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 576                 .tuner_type   = TUNER_ABSENT, /* MT2060 */
 577         },
 578
 579         [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
 580                 .name         = "Terratec Hybrid XS Secam",
 581                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 582                 .has_msp34xx  = 1,
 583                 .tuner_type   = TUNER_XC2028,
 584                 .tuner_gpio   = default_tuner_gpio,
 585                 .decoder      = EM28XX_TVP5150,
 586                 .input        = { {
 587                         .type     = EM28XX_VMUX_TELEVISION,
 588                         .vmux     = TVP5150_COMPOSITE0,
 589                         .amux     = EM28XX_AMUX_VIDEO,
 590                         .gpio     = default_analog,
 591                 }, {
 592                         .type     = EM28XX_VMUX_COMPOSITE1,
 593                         .vmux     = TVP5150_COMPOSITE1,
 594                         .amux     = EM28XX_AMUX_LINE_IN,
 595                         .gpio     = default_analog,
 596                 }, {
 597                         .type     = EM28XX_VMUX_SVIDEO,
 598                         .vmux     = TVP5150_SVIDEO,
 599                         .amux     = EM28XX_AMUX_LINE_IN,
 600                         .gpio     = default_analog,
 601                 } },
 602         },
 603         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
 604                 .name         = "Hauppauge WinTV HVR 900",
 605                 .tda9887_conf = TDA9887_PRESENT,
 606                 .tuner_type   = TUNER_XC2028,
 607                 .tuner_gpio   = default_tuner_gpio,
 608                 .mts_firmware = 1,
 609                 .has_dvb      = 1,
 610                 .dvb_gpio     = hauppauge_wintv_hvr_900_digital,
 611                 .decoder      = EM28XX_TVP5150,
 612                 .input        = { {
 613                         .type     = EM28XX_VMUX_TELEVISION,
 614                         .vmux     = TVP5150_COMPOSITE0,
 615                         .amux     = EM28XX_AMUX_VIDEO,
 616                         .gpio     = hauppauge_wintv_hvr_900_analog,
 617                 }, {
 618                         .type     = EM28XX_VMUX_COMPOSITE1,
 619                         .vmux     = TVP5150_COMPOSITE1,
 620                         .amux     = EM28XX_AMUX_LINE_IN,
 621                         .gpio     = hauppauge_wintv_hvr_900_analog,
 622                 }, {
 623                         .type     = EM28XX_VMUX_SVIDEO,
 624                         .vmux     = TVP5150_SVIDEO,
 625                         .amux     = EM28XX_AMUX_LINE_IN,
 626                         .gpio     = hauppauge_wintv_hvr_900_analog,
 627                 } },
 628         },
 629         [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
 630                 .name         = "Hauppauge WinTV HVR 900 (R2)",
 631                 .tda9887_conf = TDA9887_PRESENT,
 632                 .tuner_type   = TUNER_XC2028,
 633                 .tuner_gpio   = default_tuner_gpio,
 634                 .mts_firmware = 1,
 635                 .decoder      = EM28XX_TVP5150,
 636                 .input        = { {
 637                         .type     = EM28XX_VMUX_TELEVISION,
 638                         .vmux     = TVP5150_COMPOSITE0,
 639                         .amux     = EM28XX_AMUX_VIDEO,
 640                         .gpio     = hauppauge_wintv_hvr_900_analog,
 641                 }, {
 642                         .type     = EM28XX_VMUX_COMPOSITE1,
 643                         .vmux     = TVP5150_COMPOSITE1,
 644                         .amux     = EM28XX_AMUX_LINE_IN,
 645                         .gpio     = hauppauge_wintv_hvr_900_analog,
 646                 }, {
 647                         .type     = EM28XX_VMUX_SVIDEO,
 648                         .vmux     = TVP5150_SVIDEO,
 649                         .amux     = EM28XX_AMUX_LINE_IN,
 650                         .gpio     = hauppauge_wintv_hvr_900_analog,
 651                 } },
 652         },
 653         [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
 654                 .name           = "Hauppauge WinTV HVR 850",
 655                 .tuner_type     = TUNER_XC2028,
 656                 .tuner_gpio     = default_tuner_gpio,
 657                 .mts_firmware   = 1,
 658                 .has_dvb        = 1,
 659                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 660                 .ir_codes       = ir_codes_hauppauge_new,
 661                 .decoder        = EM28XX_TVP5150,
 662                 .input          = { {
 663                         .type     = EM28XX_VMUX_TELEVISION,
 664                         .vmux     = TVP5150_COMPOSITE0,
 665                         .amux     = EM28XX_AMUX_VIDEO,
 666                         .gpio     = hauppauge_wintv_hvr_900_analog,
 667                 }, {
 668                         .type     = EM28XX_VMUX_COMPOSITE1,
 669                         .vmux     = TVP5150_COMPOSITE1,
 670                         .amux     = EM28XX_AMUX_LINE_IN,
 671                         .gpio     = hauppauge_wintv_hvr_900_analog,
 672                 }, {
 673                         .type     = EM28XX_VMUX_SVIDEO,
 674                         .vmux     = TVP5150_SVIDEO,
 675                         .amux     = EM28XX_AMUX_LINE_IN,
 676                         .gpio     = hauppauge_wintv_hvr_900_analog,
 677                 } },
 678         },
 679         [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
 680                 .name           = "Hauppauge WinTV HVR 950",
 681                 .tuner_type     = TUNER_XC2028,
 682                 .tuner_gpio     = default_tuner_gpio,
 683                 .mts_firmware   = 1,
 684                 .has_dvb        = 1,
 685                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 686                 .ir_codes       = ir_codes_hauppauge_new,
 687                 .decoder        = EM28XX_TVP5150,
 688                 .input          = { {
 689                         .type     = EM28XX_VMUX_TELEVISION,
 690                         .vmux     = TVP5150_COMPOSITE0,
 691                         .amux     = EM28XX_AMUX_VIDEO,
 692                         .gpio     = hauppauge_wintv_hvr_900_analog,
 693                 }, {
 694                         .type     = EM28XX_VMUX_COMPOSITE1,
 695                         .vmux     = TVP5150_COMPOSITE1,
 696                         .amux     = EM28XX_AMUX_LINE_IN,
 697                         .gpio     = hauppauge_wintv_hvr_900_analog,
 698                 }, {
 699                         .type     = EM28XX_VMUX_SVIDEO,
 700                         .vmux     = TVP5150_SVIDEO,
 701                         .amux     = EM28XX_AMUX_LINE_IN,
 702                         .gpio     = hauppauge_wintv_hvr_900_analog,
 703                 } },
 704         },
 705         [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
 706                 .name           = "Pinnacle PCTV HD Pro Stick",
 707                 .tuner_type     = TUNER_XC2028,
 708                 .tuner_gpio   = default_tuner_gpio,
 709                 .mts_firmware   = 1,
 710                 .has_dvb        = 1,
 711                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 712                 .ir_codes       = ir_codes_pinnacle_pctv_hd,
 713                 .decoder        = EM28XX_TVP5150,
 714                 .input          = { {
 715                         .type     = EM28XX_VMUX_TELEVISION,
 716                         .vmux     = TVP5150_COMPOSITE0,
 717                         .amux     = EM28XX_AMUX_VIDEO,
 718                         .gpio     = hauppauge_wintv_hvr_900_analog,
 719                 }, {
 720                         .type     = EM28XX_VMUX_COMPOSITE1,
 721                         .vmux     = TVP5150_COMPOSITE1,
 722                         .amux     = EM28XX_AMUX_LINE_IN,
 723                         .gpio     = hauppauge_wintv_hvr_900_analog,
 724                 }, {
 725                         .type     = EM28XX_VMUX_SVIDEO,
 726                         .vmux     = TVP5150_SVIDEO,
 727                         .amux     = EM28XX_AMUX_LINE_IN,
 728                         .gpio     = hauppauge_wintv_hvr_900_analog,
 729                 } },
 730         },
 731         [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
 732                 .name           = "AMD ATI TV Wonder HD 600",
 733                 .tuner_type     = TUNER_XC2028,
 734                 .tuner_gpio     = default_tuner_gpio,
 735                 .mts_firmware   = 1,
 736                 .has_dvb        = 1,
 737                 .dvb_gpio       = hauppauge_wintv_hvr_900_digital,
 738                 .ir_codes       = ir_codes_ati_tv_wonder_hd_600,
 739                 .decoder        = EM28XX_TVP5150,
 740                 .input          = { {
 741                         .type     = EM28XX_VMUX_TELEVISION,
 742                         .vmux     = TVP5150_COMPOSITE0,
 743                         .amux     = EM28XX_AMUX_VIDEO,
 744                         .gpio     = hauppauge_wintv_hvr_900_analog,
 745                 }, {
 746                         .type     = EM28XX_VMUX_COMPOSITE1,
 747                         .vmux     = TVP5150_COMPOSITE1,
 748                         .amux     = EM28XX_AMUX_LINE_IN,
 749                         .gpio     = hauppauge_wintv_hvr_900_analog,
 750                 }, {
 751                         .type     = EM28XX_VMUX_SVIDEO,
 752                         .vmux     = TVP5150_SVIDEO,
 753                         .amux     = EM28XX_AMUX_LINE_IN,
 754                         .gpio     = hauppauge_wintv_hvr_900_analog,
 755                 } },
 756         },
 757         [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
 758                 .name           = "Terratec Hybrid XS",
 759                 .tuner_type     = TUNER_XC2028,
 760                 .tuner_gpio     = default_tuner_gpio,
 761                 .decoder        = EM28XX_TVP5150,
 762                 .has_dvb        = 1,
 763                 .dvb_gpio       = default_analog,
 764                 .input          = { {
 765                         .type     = EM28XX_VMUX_TELEVISION,
 766                         .vmux     = TVP5150_COMPOSITE0,
 767                         .amux     = EM28XX_AMUX_VIDEO,
 768                         .gpio     = default_analog,
 769                 }, {
 770                         .type     = EM28XX_VMUX_COMPOSITE1,
 771                         .vmux     = TVP5150_COMPOSITE1,
 772                         .amux     = EM28XX_AMUX_LINE_IN,
 773                         .gpio     = default_analog,
 774                 }, {
 775                         .type     = EM28XX_VMUX_SVIDEO,
 776                         .vmux     = TVP5150_SVIDEO,
 777                         .amux     = EM28XX_AMUX_LINE_IN,
 778                         .gpio     = default_analog,
 779                 } },
 780         },
 781         /* maybe there's a reason behind it why Terratec sells the Hybrid XS
 782            as Prodigy XS with a different PID, let's keep it separated for now
 783            maybe we'll need it lateron */
 784         [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
 785                 .name         = "Terratec Prodigy XS",
 786                 .tuner_type   = TUNER_XC2028,
 787                 .tuner_gpio   = default_tuner_gpio,
 788                 .decoder      = EM28XX_TVP5150,
 789                 .input        = { {
 790                         .type     = EM28XX_VMUX_TELEVISION,
 791                         .vmux     = TVP5150_COMPOSITE0,
 792                         .amux     = EM28XX_AMUX_VIDEO,
 793                         .gpio     = hauppauge_wintv_hvr_900_analog,
 794                 }, {
 795                         .type     = EM28XX_VMUX_COMPOSITE1,
 796                         .vmux     = TVP5150_COMPOSITE1,
 797                         .amux     = EM28XX_AMUX_LINE_IN,
 798                         .gpio     = hauppauge_wintv_hvr_900_analog,
 799                 }, {
 800                         .type     = EM28XX_VMUX_SVIDEO,
 801                         .vmux     = TVP5150_SVIDEO,
 802                         .amux     = EM28XX_AMUX_LINE_IN,
 803                         .gpio     = hauppauge_wintv_hvr_900_analog,
 804                 } },
 805         },
 806         [EM2820_BOARD_MSI_VOX_USB_2] = {
 807                 .name              = "MSI VOX USB 2.0",
 808                 .tuner_type        = TUNER_LG_PAL_NEW_TAPC,
 809                 .tda9887_conf      = TDA9887_PRESENT      |
 810                                      TDA9887_PORT1_ACTIVE |
 811                                      TDA9887_PORT2_ACTIVE,
 812                 .max_range_640_480 = 1,
 813                 .decoder           = EM28XX_SAA711X,
 814                 .input             = { {
 815                         .type      = EM28XX_VMUX_TELEVISION,
 816                         .vmux      = SAA7115_COMPOSITE4,
 817                         .amux      = EM28XX_AMUX_VIDEO,
 818                 }, {
 819                         .type      = EM28XX_VMUX_COMPOSITE1,
 820                         .vmux      = SAA7115_COMPOSITE0,
 821                         .amux      = EM28XX_AMUX_LINE_IN,
 822                 }, {
 823                         .type      = EM28XX_VMUX_SVIDEO,
 824                         .vmux      = SAA7115_SVIDEO3,
 825                         .amux      = EM28XX_AMUX_LINE_IN,
 826                 } },
 827         },
 828         [EM2800_BOARD_TERRATEC_CINERGY_200] = {
 829                 .name         = "Terratec Cinergy 200 USB",
 830                 .is_em2800    = 1,
 831                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 832                 .tda9887_conf = TDA9887_PRESENT,
 833                 .decoder      = EM28XX_SAA711X,
 834                 .input        = { {
 835                         .type     = EM28XX_VMUX_TELEVISION,
 836                         .vmux     = SAA7115_COMPOSITE2,
 837                         .amux     = EM28XX_AMUX_VIDEO,
 838                 }, {
 839                         .type     = EM28XX_VMUX_COMPOSITE1,
 840                         .vmux     = SAA7115_COMPOSITE0,
 841                         .amux     = EM28XX_AMUX_LINE_IN,
 842                 }, {
 843                         .type     = EM28XX_VMUX_SVIDEO,
 844                         .vmux     = SAA7115_SVIDEO3,
 845                         .amux     = EM28XX_AMUX_LINE_IN,
 846                 } },
 847         },
 848         [EM2800_BOARD_GRABBEEX_USB2800] = {
 849                 .name         = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
 850                 .is_em2800    = 1,
 851                 .decoder      = EM28XX_SAA711X,
 852                 .tuner_type   = TUNER_ABSENT, /* capture only board */
 853                 .input        = { {
 854                         .type     = EM28XX_VMUX_COMPOSITE1,
 855                         .vmux     = SAA7115_COMPOSITE0,
 856                         .amux     = EM28XX_AMUX_LINE_IN,
 857                 }, {
 858                         .type     = EM28XX_VMUX_SVIDEO,
 859                         .vmux     = SAA7115_SVIDEO3,
 860                         .amux     = EM28XX_AMUX_LINE_IN,
 861                 } },
 862         },
 863         [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
 864                 .name         = "Leadtek Winfast USB II",
 865                 .is_em2800    = 1,
 866                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 867                 .tda9887_conf = TDA9887_PRESENT,
 868                 .decoder      = EM28XX_SAA711X,
 869                 .input        = { {
 870                         .type     = EM28XX_VMUX_TELEVISION,
 871                         .vmux     = SAA7115_COMPOSITE2,
 872                         .amux     = EM28XX_AMUX_VIDEO,
 873                 }, {
 874                         .type     = EM28XX_VMUX_COMPOSITE1,
 875                         .vmux     = SAA7115_COMPOSITE0,
 876                         .amux     = EM28XX_AMUX_LINE_IN,
 877                 }, {
 878                         .type     = EM28XX_VMUX_SVIDEO,
 879                         .vmux     = SAA7115_SVIDEO3,
 880                         .amux     = EM28XX_AMUX_LINE_IN,
 881                 } },
 882         },
 883         [EM2800_BOARD_KWORLD_USB2800] = {
 884                 .name         = "Kworld USB2800",
 885                 .is_em2800    = 1,
 886                 .tuner_type   = TUNER_PHILIPS_FCV1236D,
 887                 .tda9887_conf = TDA9887_PRESENT,
 888                 .decoder      = EM28XX_SAA711X,
 889                 .input        = { {
 890                         .type     = EM28XX_VMUX_TELEVISION,
 891                         .vmux     = SAA7115_COMPOSITE2,
 892                         .amux     = EM28XX_AMUX_VIDEO,
 893                 }, {
 894                         .type     = EM28XX_VMUX_COMPOSITE1,
 895                         .vmux     = SAA7115_COMPOSITE0,
 896                         .amux     = EM28XX_AMUX_LINE_IN,
 897                 }, {
 898                         .type     = EM28XX_VMUX_SVIDEO,
 899                         .vmux     = SAA7115_SVIDEO3,
 900                         .amux     = EM28XX_AMUX_LINE_IN,
 901                 } },
 902         },
 903         [EM2820_BOARD_PINNACLE_DVC_90] = {
 904                 .name         = "Pinnacle Dazzle DVC 90/DVC 100",
 905                 .tuner_type   = TUNER_ABSENT, /* capture only board */
 906                 .decoder      = EM28XX_SAA711X,
 907                 .input        = { {
 908                         .type     = EM28XX_VMUX_COMPOSITE1,
 909                         .vmux     = SAA7115_COMPOSITE0,
 910                         .amux     = EM28XX_AMUX_LINE_IN,
 911                 }, {
 912                         .type     = EM28XX_VMUX_SVIDEO,
 913                         .vmux     = SAA7115_SVIDEO3,
 914                         .amux     = EM28XX_AMUX_LINE_IN,
 915                 } },
 916         },
 917         [EM2800_BOARD_VGEAR_POCKETTV] = {
 918                 .name         = "V-Gear PocketTV",
 919                 .is_em2800    = 1,
 920                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
 921                 .tda9887_conf = TDA9887_PRESENT,
 922                 .decoder      = EM28XX_SAA711X,
 923                 .input        = { {
 924                         .type     = EM28XX_VMUX_TELEVISION,
 925                         .vmux     = SAA7115_COMPOSITE2,
 926                         .amux     = EM28XX_AMUX_VIDEO,
 927                 }, {
 928                         .type     = EM28XX_VMUX_COMPOSITE1,
 929                         .vmux     = SAA7115_COMPOSITE0,
 930                         .amux     = EM28XX_AMUX_LINE_IN,
 931                 }, {
 932                         .type     = EM28XX_VMUX_SVIDEO,
 933                         .vmux     = SAA7115_SVIDEO3,
 934                         .amux     = EM28XX_AMUX_LINE_IN,
 935                 } },
 936         },
 937         [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
 938                 .name         = "Pixelview Prolink PlayTV USB 2.0",
 939                 .tda9887_conf = TDA9887_PRESENT,
 940                 .tuner_type   = TUNER_YMEC_TVF_5533MF,
 941                 .decoder      = EM28XX_SAA711X,
 942                 .input        = { {
 943                         .type     = EM28XX_VMUX_TELEVISION,
 944                         .vmux     = SAA7115_COMPOSITE2,
 945                         .amux     = EM28XX_AMUX_VIDEO,
 946                         .aout     = EM28XX_AOUT_MONO |  /* I2S */
 947                                     EM28XX_AOUT_MASTER, /* Line out pin */
 948                 }, {
 949                         .type     = EM28XX_VMUX_COMPOSITE1,
 950                         .vmux     = SAA7115_COMPOSITE0,
 951                         .amux     = EM28XX_AMUX_LINE_IN,
 952                 }, {
 953                         .type     = EM28XX_VMUX_SVIDEO,
 954                         .vmux     = SAA7115_SVIDEO3,
 955                         .amux     = EM28XX_AMUX_LINE_IN,
 956                 } },
 957         },
 958         [EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA] = {
 959                 .name                = "PointNix Intra-Oral Camera",
 960                 .has_snapshot_button = 1,
 961                 .tda9887_conf        = TDA9887_PRESENT,
 962                 .tuner_type          = TUNER_ABSENT,
 963                 .decoder             = EM28XX_SAA711X,
 964                 .input               = { {
 965                         .type     = EM28XX_VMUX_SVIDEO,
 966                         .vmux     = SAA7115_SVIDEO3,
 967                         .amux     = EM28XX_AMUX_VIDEO,
 968                 } },
 969         },
 970         [EM2880_BOARD_MSI_DIGIVOX_AD] = {
 971                 .name         = "MSI DigiVox A/D",
 972                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 973                 .tuner_type   = TUNER_XC2028,
 974                 .tuner_gpio   = default_tuner_gpio,
 975                 .decoder      = EM28XX_TVP5150,
 976                 .input        = { {
 977                         .type     = EM28XX_VMUX_TELEVISION,
 978                         .vmux     = TVP5150_COMPOSITE0,
 979                         .amux     = EM28XX_AMUX_VIDEO,
 980                         .gpio     = em2880_msi_digivox_ad_analog,
 981                 }, {
 982                         .type     = EM28XX_VMUX_COMPOSITE1,
 983                         .vmux     = TVP5150_COMPOSITE1,
 984                         .amux     = EM28XX_AMUX_LINE_IN,
 985                         .gpio     = em2880_msi_digivox_ad_analog,
 986                 }, {
 987                         .type     = EM28XX_VMUX_SVIDEO,
 988                         .vmux     = TVP5150_SVIDEO,
 989                         .amux     = EM28XX_AMUX_LINE_IN,
 990                         .gpio     = em2880_msi_digivox_ad_analog,
 991                 } },
 992         },
 993         [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
 994                 .name         = "MSI DigiVox A/D II",
 995                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
 996                 .tuner_type   = TUNER_XC2028,
 997                 .tuner_gpio   = default_tuner_gpio,
 998                 .decoder      = EM28XX_TVP5150,
 999                 .input        = { {
1000                         .type     = EM28XX_VMUX_TELEVISION,
1001                         .vmux     = TVP5150_COMPOSITE0,
1002                         .amux     = EM28XX_AMUX_VIDEO,
1003                         .gpio     = em2880_msi_digivox_ad_analog,
1004                 }, {
1005                         .type     = EM28XX_VMUX_COMPOSITE1,
1006                         .vmux     = TVP5150_COMPOSITE1,
1007                         .amux     = EM28XX_AMUX_LINE_IN,
1008                         .gpio     = em2880_msi_digivox_ad_analog,
1009                 }, {
1010                         .type     = EM28XX_VMUX_SVIDEO,
1011                         .vmux     = TVP5150_SVIDEO,
1012                         .amux     = EM28XX_AMUX_LINE_IN,
1013                         .gpio     = em2880_msi_digivox_ad_analog,
1014                 } },
1015         },
1016         [EM2880_BOARD_KWORLD_DVB_305U] = {
1017                 .name         = "KWorld DVB-T 305U",
1018                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1019                 .tuner_type   = TUNER_XC2028,
1020                 .tuner_gpio   = default_tuner_gpio,
1021                 .decoder      = EM28XX_TVP5150,
1022                 .input        = { {
1023                         .type     = EM28XX_VMUX_TELEVISION,
1024                         .vmux     = TVP5150_COMPOSITE0,
1025                         .amux     = EM28XX_AMUX_VIDEO,
1026                 }, {
1027                         .type     = EM28XX_VMUX_COMPOSITE1,
1028                         .vmux     = TVP5150_COMPOSITE1,
1029                         .amux     = EM28XX_AMUX_LINE_IN,
1030                 }, {
1031                         .type     = EM28XX_VMUX_SVIDEO,
1032                         .vmux     = TVP5150_SVIDEO,
1033                         .amux     = EM28XX_AMUX_LINE_IN,
1034                 } },
1035         },
1036         [EM2880_BOARD_KWORLD_DVB_310U] = {
1037                 .name         = "KWorld DVB-T 310U",
1038                 .tuner_type   = TUNER_XC2028,
1039                 .tuner_gpio   = default_tuner_gpio,
1040                 .has_dvb      = 1,
1041                 .dvb_gpio     = default_digital,
1042                 .mts_firmware = 1,
1043                 .decoder      = EM28XX_TVP5150,
1044                 .input        = { {
1045                         .type     = EM28XX_VMUX_TELEVISION,
1046                         .vmux     = TVP5150_COMPOSITE0,
1047                         .amux     = EM28XX_AMUX_VIDEO,
1048                         .gpio     = default_analog,
1049                 }, {
1050                         .type     = EM28XX_VMUX_COMPOSITE1,
1051                         .vmux     = TVP5150_COMPOSITE1,
1052                         .amux     = EM28XX_AMUX_LINE_IN,
1053                         .gpio     = default_analog,
1054                 }, {    /* S-video has not been tested yet */
1055                         .type     = EM28XX_VMUX_SVIDEO,
1056                         .vmux     = TVP5150_SVIDEO,
1057                         .amux     = EM28XX_AMUX_LINE_IN,
1058                         .gpio     = default_analog,
1059                 } },
1060         },
1061         [EM2881_BOARD_DNT_DA2_HYBRID] = {
1062                 .name         = "DNT DA2 Hybrid",
1063                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1064                 .tuner_type   = TUNER_XC2028,
1065                 .tuner_gpio   = default_tuner_gpio,
1066                 .decoder      = EM28XX_TVP5150,
1067                 .input        = { {
1068                         .type     = EM28XX_VMUX_TELEVISION,
1069                         .vmux     = TVP5150_COMPOSITE0,
1070                         .amux     = EM28XX_AMUX_VIDEO,
1071                         .gpio     = default_analog,
1072                 }, {
1073                         .type     = EM28XX_VMUX_COMPOSITE1,
1074                         .vmux     = TVP5150_COMPOSITE1,
1075                         .amux     = EM28XX_AMUX_LINE_IN,
1076                         .gpio     = default_analog,
1077                 }, {
1078                         .type     = EM28XX_VMUX_SVIDEO,
1079                         .vmux     = TVP5150_SVIDEO,
1080                         .amux     = EM28XX_AMUX_LINE_IN,
1081                         .gpio     = default_analog,
1082                 } },
1083         },
1084         [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1085                 .name         = "Pinnacle Hybrid Pro",
1086                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1087                 .tuner_type   = TUNER_XC2028,
1088                 .tuner_gpio   = default_tuner_gpio,
1089                 .decoder      = EM28XX_TVP5150,
1090                 .input        = { {
1091                         .type     = EM28XX_VMUX_TELEVISION,
1092                         .vmux     = TVP5150_COMPOSITE0,
1093                         .amux     = EM28XX_AMUX_VIDEO,
1094                         .gpio     = default_analog,
1095                 }, {
1096                         .type     = EM28XX_VMUX_COMPOSITE1,
1097                         .vmux     = TVP5150_COMPOSITE1,
1098                         .amux     = EM28XX_AMUX_LINE_IN,
1099                         .gpio     = default_analog,
1100                 }, {
1101                         .type     = EM28XX_VMUX_SVIDEO,
1102                         .vmux     = TVP5150_SVIDEO,
1103                         .amux     = EM28XX_AMUX_LINE_IN,
1104                         .gpio     = default_analog,
1105                 } },
1106         },
1107         [EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
1108                 .name         = "Pinnacle Hybrid Pro (2)",
1109                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1110                 .tuner_type   = TUNER_XC2028,
1111                 .tuner_gpio   = default_tuner_gpio,
1112                 .mts_firmware = 1,
1113                 .decoder      = EM28XX_TVP5150,
1114                 .input        = { {
1115                         .type     = EM28XX_VMUX_TELEVISION,
1116                         .vmux     = TVP5150_COMPOSITE0,
1117                         .amux     = EM28XX_AMUX_VIDEO,
1118                         .gpio     = hauppauge_wintv_hvr_900_analog,
1119                 }, {
1120                         .type     = EM28XX_VMUX_COMPOSITE1,
1121                         .vmux     = TVP5150_COMPOSITE1,
1122                         .amux     = EM28XX_AMUX_LINE_IN,
1123                         .gpio     = hauppauge_wintv_hvr_900_analog,
1124                 }, {
1125                         .type     = EM28XX_VMUX_SVIDEO,
1126                         .vmux     = TVP5150_SVIDEO,
1127                         .amux     = EM28XX_AMUX_LINE_IN,
1128                         .gpio     = hauppauge_wintv_hvr_900_analog,
1129                 } },
1130         },
1131         [EM2882_BOARD_KWORLD_VS_DVBT] = {
1132                 .name         = "Kworld VS-DVB-T 323UR",
1133                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1134                 .tuner_type   = TUNER_XC2028,
1135                 .tuner_gpio   = default_tuner_gpio,
1136                 .decoder      = EM28XX_TVP5150,
1137                 .input        = { {
1138                         .type     = EM28XX_VMUX_TELEVISION,
1139                         .vmux     = TVP5150_COMPOSITE0,
1140                         .amux     = EM28XX_AMUX_VIDEO,
1141                 }, {
1142                         .type     = EM28XX_VMUX_COMPOSITE1,
1143                         .vmux     = TVP5150_COMPOSITE1,
1144                         .amux     = EM28XX_AMUX_LINE_IN,
1145                 }, {
1146                         .type     = EM28XX_VMUX_SVIDEO,
1147                         .vmux     = TVP5150_SVIDEO,
1148                         .amux     = EM28XX_AMUX_LINE_IN,
1149                 } },
1150         },
1151         [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1152                 .name         = "Terratec Hybrid XS (em2882)",
1153                 .valid        = EM28XX_BOARD_NOT_VALIDATED,
1154                 .tuner_type   = TUNER_XC2028,
1155                 .tuner_gpio   = default_tuner_gpio,
1156                 .decoder      = EM28XX_TVP5150,
1157                 .input        = { {
1158                         .type     = EM28XX_VMUX_TELEVISION,
1159                         .vmux     = TVP5150_COMPOSITE0,
1160                         .amux     = EM28XX_AMUX_VIDEO,
1161                         .gpio     = hauppauge_wintv_hvr_900_analog,
1162                 }, {
1163                         .type     = EM28XX_VMUX_COMPOSITE1,
1164                         .vmux     = TVP5150_COMPOSITE1,
1165                         .amux     = EM28XX_AMUX_LINE_IN,
1166                         .gpio     = hauppauge_wintv_hvr_900_analog,
1167                 }, {
1168                         .type     = EM28XX_VMUX_SVIDEO,
1169                         .vmux     = TVP5150_SVIDEO,
1170                         .amux     = EM28XX_AMUX_LINE_IN,
1171                         .gpio     = hauppauge_wintv_hvr_900_analog,
1172                 } },
1173         },
1174         [EM2883_BOARD_KWORLD_HYBRID_A316] = {
1175                 .name         = "Kworld PlusTV HD Hybrid 330",
1176                 .tuner_type   = TUNER_XC2028,
1177                 .tuner_gpio   = default_tuner_gpio,
1178                 .decoder      = EM28XX_TVP5150,
1179                 .mts_firmware = 1,
1180                 .has_dvb      = 1,
1181                 .dvb_gpio     = default_digital,
1182                 .input        = { {
1183                         .type     = EM28XX_VMUX_TELEVISION,
1184                         .vmux     = TVP5150_COMPOSITE0,
1185                         .amux     = EM28XX_AMUX_VIDEO,
1186                         .gpio     = default_analog,
1187                 }, {
1188                         .type     = EM28XX_VMUX_COMPOSITE1,
1189                         .vmux     = TVP5150_COMPOSITE1,
1190                         .amux     = EM28XX_AMUX_LINE_IN,
1191                         .gpio     = hauppauge_wintv_hvr_900_analog,
1192                 }, {
1193                         .type     = EM28XX_VMUX_SVIDEO,
1194                         .vmux     = TVP5150_SVIDEO,
1195                         .amux     = EM28XX_AMUX_LINE_IN,
1196                         .gpio     = hauppauge_wintv_hvr_900_analog,
1197                 } },
1198         },
1199         [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1200                 .name         = "Compro VideoMate ForYou/Stereo",
1201                 .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
1202                 .tda9887_conf = TDA9887_PRESENT,
1203                 .decoder      = EM28XX_TVP5150,
1204                 .input        = { {
1205                         .type     = EM28XX_VMUX_TELEVISION,
1206                         .vmux     = TVP5150_COMPOSITE0,
1207                         .amux     = EM28XX_AMUX_LINE_IN,
1208                 }, {
1209                         .type     = EM28XX_VMUX_SVIDEO,
1210                         .vmux     = TVP5150_SVIDEO,
1211                         .amux     = EM28XX_AMUX_LINE_IN,
1212                 } },
1213         },
1214
1215         /* em2874 tuners are DVB only */
1216
1217         [EM2874_BOARD_PINNACLE_PCTV_80E] = {
1218                 .name         = "Pinnacle PCTV HD Mini",
1219                 .tuner_type   = TUNER_ABSENT,
1220                 .has_dvb      = 1,
1221                 .dvb_gpio     = em2874_pinnacle_80e_digital,
1222                 .ir_codes     = ir_codes_pinnacle_pctv_hd,
1223                 .decoder      = EM28XX_NODECODER,
1224                 .i2c_speed    = EM28XX_I2C_CLK_WAIT_ENABLE |
1225                                 EM2874_I2C_SECONDARY_BUS_SELECT |
1226                                 EM28XX_I2C_FREQ_400_KHZ,
1227 #ifdef DJH_DEBUG
1228                 .input        = { {
1229                         .type     = EM28XX_VMUX_TELEVISION,
1230                         .vmux     = TVP5150_COMPOSITE0,
1231                         .amux     = EM28XX_AMUX_LINE_IN,
1232                 } },
1233 #endif
1234         },
1235 };
1236 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1237
1238 /* table of devices that work with this driver */
1239 struct usb_device_id em28xx_id_table [] = {
1240         { USB_DEVICE(0xeb1a, 0x2750),
1241                         .driver_info = EM2750_BOARD_UNKNOWN },
1242         { USB_DEVICE(0xeb1a, 0x2751),
1243                         .driver_info = EM2750_BOARD_UNKNOWN },
1244         { USB_DEVICE(0xeb1a, 0x2800),
1245                         .driver_info = EM2800_BOARD_UNKNOWN },
1246         { USB_DEVICE(0xeb1a, 0x2820),
1247                         .driver_info = EM2820_BOARD_UNKNOWN },
1248         { USB_DEVICE(0xeb1a, 0x2821),
1249                         .driver_info = EM2820_BOARD_UNKNOWN },
1250         { USB_DEVICE(0xeb1a, 0x2860),
1251                         .driver_info = EM2820_BOARD_UNKNOWN },
1252         { USB_DEVICE(0xeb1a, 0x2861),
1253                         .driver_info = EM2820_BOARD_UNKNOWN },
1254         { USB_DEVICE(0xeb1a, 0x2870),
1255                         .driver_info = EM2820_BOARD_UNKNOWN },
1256         { USB_DEVICE(0xeb1a, 0x2881),
1257                         .driver_info = EM2820_BOARD_UNKNOWN },
1258         { USB_DEVICE(0xeb1a, 0x2883),
1259                         .driver_info = EM2820_BOARD_UNKNOWN },
1260         { USB_DEVICE(0xeb1a, 0xe300),
1261                         .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
1262         { USB_DEVICE(0xeb1a, 0xe305),
1263                         .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
1264         { USB_DEVICE(0xeb1a, 0xe310),
1265                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
1266         { USB_DEVICE(0xeb1a, 0xa316),
1267                         .driver_info = EM2883_BOARD_KWORLD_HYBRID_A316 },
1268         { USB_DEVICE(0xeb1a, 0xe320),
1269                         .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
1270         { USB_DEVICE(0xeb1a, 0xe323),
1271                         .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
1272         { USB_DEVICE(0xeb1a, 0xe350),
1273                         .driver_info = EM2870_BOARD_KWORLD_350U },
1274         { USB_DEVICE(0xeb1a, 0xe355),
1275                         .driver_info = EM2870_BOARD_KWORLD_355U },
1276         { USB_DEVICE(0xeb1a, 0x2801),
1277                         .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
1278         { USB_DEVICE(0xeb1a, 0xe357),
1279                         .driver_info = EM2870_BOARD_KWORLD_355U },
1280         { USB_DEVICE(0x0ccd, 0x0036),
1281                         .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
1282         { USB_DEVICE(0x0ccd, 0x004c),
1283                         .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
1284         { USB_DEVICE(0x0ccd, 0x004f),
1285                         .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
1286         { USB_DEVICE(0x0ccd, 0x005e),
1287                         .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1288         { USB_DEVICE(0x0ccd, 0x0042),
1289                         .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
1290         { USB_DEVICE(0x0ccd, 0x0043),
1291                         .driver_info = EM2870_BOARD_TERRATEC_XS },
1292         { USB_DEVICE(0x0ccd, 0x0047),
1293                         .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
1294         { USB_DEVICE(0x185b, 0x2870),
1295                         .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
1296         { USB_DEVICE(0x185b, 0x2041),
1297                         .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
1298         { USB_DEVICE(0x2040, 0x4200),
1299                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1300         { USB_DEVICE(0x2040, 0x4201),
1301                         .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1302         { USB_DEVICE(0x2040, 0x6500),
1303                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
1304         { USB_DEVICE(0x2040, 0x6502),
1305                         .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
1306         { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
1307                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1308         { USB_DEVICE(0x2040, 0x6517), /* HP  HVR-950 */
1309                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1310         { USB_DEVICE(0x2040, 0x651b), /* RP  HVR-950 */
1311                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1312         { USB_DEVICE(0x2040, 0x651f),
1313                         .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
1314         { USB_DEVICE(0x0438, 0xb002),
1315                         .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
1316         { USB_DEVICE(0x2001, 0xf112),
1317                         .driver_info = EM2820_BOARD_DLINK_USB_TV },
1318         { USB_DEVICE(0x2304, 0x0207),
1319                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1320         { USB_DEVICE(0x2304, 0x0208),
1321                         .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
1322         { USB_DEVICE(0x2304, 0x021a),
1323                         .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1324         { USB_DEVICE(0x2304, 0x0226),
1325                         .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
1326         { USB_DEVICE(0x2304, 0x0227),
1327                         .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
1328         { USB_DEVICE(0x2304, 0x023f),
1329                         .driver_info = EM2874_BOARD_PINNACLE_PCTV_80E },
1330         { USB_DEVICE(0x0413, 0x6023),
1331                         .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
1332         { USB_DEVICE(0x093b, 0xa005),
1333                         .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
1334         { },
1335 };
1336 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
1337
1338 /*
1339  * EEPROM hash table for devices with generic USB IDs
1340  */
1341 static struct em28xx_hash_table em28xx_eeprom_hash [] = {
1342         /* P/N: SA 60002070465 Tuner: TVF7533-MF */
1343         {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
1344         {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
1345 };
1346
1347 /* I2C devicelist hash table for devices with generic USB IDs */
1348 static struct em28xx_hash_table em28xx_i2c_hash[] = {
1349         {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
1350         {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
1351         {0x1ba50080, EM2860_BOARD_POINTNIX_INTRAORAL_CAMERA, TUNER_ABSENT},
1352 };
1353
1354 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
1355 {
1356         int rc = 0;
1357         struct em28xx *dev = ptr;
1358
1359         if (dev->tuner_type != TUNER_XC2028)
1360                 return 0;
1361
1362         if (command != XC2028_TUNER_RESET)
1363                 return 0;
1364
1365         rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
1366
1367         return rc;
1368 }
1369 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
1370
1371 static void inline em28xx_set_model(struct em28xx *dev)
1372 {
1373         memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
1374 }
1375
1376 /* Since em28xx_pre_card_setup() requires a proper dev->model,
1377  * this won't work for boards with generic PCI IDs
1378  */
1379 void em28xx_pre_card_setup(struct em28xx *dev)
1380 {
1381         int rc;
1382
1383         em28xx_set_model(dev);
1384
1385         em28xx_info("Identified as %s (card=%d)\n",
1386                     dev->board.name, dev->model);
1387
1388         /* Set the default GPO/GPIO for legacy devices */
1389         dev->reg_gpo_num = EM2880_R04_GPO;
1390         dev->reg_gpio_num = EM28XX_R08_GPIO;
1391
1392         dev->wait_after_write = 5;
1393
1394         /* Based on the Chip ID, set the device configuration */
1395         rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
1396         if (rc > 0) {
1397                 dev->chip_id = rc;
1398
1399                 switch (dev->chip_id) {
1400                 case CHIP_ID_EM2750:
1401                         em28xx_info("chip ID is em2750\n");
1402                         break;
1403                 case CHIP_ID_EM2820:
1404                         em28xx_info("chip ID is em2820\n");
1405                         break;
1406                 case CHIP_ID_EM2840:
1407                         em28xx_info("chip ID is em2840\n");
1408                         break;
1409                 case CHIP_ID_EM2860:
1410                         em28xx_info("chip ID is em2860\n");
1411                         break;
1412                 case CHIP_ID_EM2870:
1413                         em28xx_info("chip ID is em2870\n");
1414                         dev->wait_after_write = 0;
1415                         break;
1416                 case CHIP_ID_EM2874:
1417                         em28xx_info("chip ID is em2874\n");
1418                         dev->reg_gpio_num = EM2874_R80_GPIO;
1419                         dev->wait_after_write = 0;
1420                         break;
1421                 case CHIP_ID_EM2883:
1422                         em28xx_info("chip ID is em2882/em2883\n");
1423                         dev->wait_after_write = 0;
1424                         break;
1425                 default:
1426                         em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
1427                 }
1428         }
1429
1430         /* Prepopulate cached GPO register content */
1431         rc = em28xx_read_reg(dev, dev->reg_gpo_num);
1432         if (rc >= 0)
1433                 dev->reg_gpo = rc;
1434
1435         /* Those are the default values for the majority of boards
1436            Use those values if not specified otherwise at boards entry
1437          */
1438         if (!dev->board.xclk)
1439                 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
1440                                   EM28XX_XCLK_FREQUENCY_12MHZ;
1441
1442         if (!dev->board.i2c_speed)
1443                 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1444                                        EM28XX_I2C_FREQ_100_KHZ;
1445
1446         em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
1447         em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
1448         msleep(50);
1449
1450         /* request some modules */
1451         switch (dev->model) {
1452         case EM2861_BOARD_PLEXTOR_PX_TV100U:
1453                 /* FIXME guess */
1454                 /* Turn on analog audio output */
1455                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1456                 break;
1457         case EM2861_BOARD_KWORLD_PVRTV_300U:
1458         case EM2880_BOARD_KWORLD_DVB_305U:
1459                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
1460                 msleep(10);
1461                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
1462                 msleep(10);
1463                 break;
1464         case EM2870_BOARD_COMPRO_VIDEOMATE:
1465                 /* TODO: someone can do some cleanup here...
1466                          not everything's needed */
1467                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
1468                 msleep(10);
1469                 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
1470                 msleep(10);
1471                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1472                 mdelay(70);
1473                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1474                 mdelay(70);
1475                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
1476                 mdelay(70);
1477                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
1478                 mdelay(70);
1479                 break;
1480         case EM2870_BOARD_TERRATEC_XS_MT2060:
1481                 /* this device needs some gpio writes to get the DVB-T
1482                    demod work */
1483                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1484                 mdelay(70);
1485                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1486                 mdelay(70);
1487                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1488                 mdelay(70);
1489                 break;
1490         case EM2870_BOARD_PINNACLE_PCTV_DVB:
1491                 /* this device needs some gpio writes to get the
1492                    DVB-T demod work */
1493                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1494                 mdelay(70);
1495                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
1496                 mdelay(70);
1497                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
1498                 mdelay(70);
1499                 break;
1500         case EM2820_BOARD_GADMEI_UTV310:
1501         case EM2820_BOARD_MSI_VOX_USB_2:
1502                 /* enables audio for that devices */
1503                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
1504                 break;
1505         }
1506
1507         em28xx_gpio_set(dev, dev->board.tuner_gpio);
1508         em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
1509
1510         /* Unlock device */
1511         em28xx_set_mode(dev, EM28XX_SUSPEND);
1512 }
1513
1514 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
1515 {
1516         memset(ctl, 0, sizeof(*ctl));
1517
1518         ctl->fname   = XC2028_DEFAULT_FIRMWARE;
1519         ctl->max_len = 64;
1520         ctl->mts = em28xx_boards[dev->model].mts_firmware;
1521
1522         switch (dev->model) {
1523         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1524                 ctl->demod = XC3028_FE_ZARLINK456;
1525                 break;
1526         case EM2880_BOARD_TERRATEC_HYBRID_XS:
1527                 ctl->demod = XC3028_FE_ZARLINK456;
1528                 break;
1529         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1530                 /* djh - Not sure which demod we need here */
1531                 ctl->demod = XC3028_FE_DEFAULT;
1532                 break;
1533         case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
1534                 ctl->demod = XC3028_FE_DEFAULT;
1535                 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
1536                 break;
1537         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
1538         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
1539         case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
1540                 /* FIXME: Better to specify the needed IF */
1541                 ctl->demod = XC3028_FE_DEFAULT;
1542                 break;
1543         default:
1544                 ctl->demod = XC3028_FE_OREN538;
1545         }
1546 }
1547
1548 static void em28xx_config_tuner(struct em28xx *dev)
1549 {
1550         struct v4l2_priv_tun_config  xc2028_cfg;
1551         struct tuner_setup           tun_setup;
1552         struct v4l2_frequency        f;
1553
1554         if (dev->tuner_type == TUNER_ABSENT)
1555                 return;
1556
1557         tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
1558         tun_setup.type = dev->tuner_type;
1559         tun_setup.addr = dev->tuner_addr;
1560         tun_setup.tuner_callback = em28xx_tuner_callback;
1561
1562         em28xx_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
1563
1564         if (dev->tuner_type == TUNER_XC2028) {
1565                 struct xc2028_ctrl           ctl;
1566
1567                 em28xx_setup_xc3028(dev, &ctl);
1568
1569                 xc2028_cfg.tuner = TUNER_XC2028;
1570                 xc2028_cfg.priv  = &ctl;
1571
1572                 em28xx_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
1573         }
1574
1575         /* configure tuner */
1576         f.tuner = 0;
1577         f.type = V4L2_TUNER_ANALOG_TV;
1578         f.frequency = 9076;     /* just a magic number */
1579         dev->ctl_freq = f.frequency;
1580         em28xx_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, &f);
1581 }
1582
1583 static int em28xx_hint_board(struct em28xx *dev)
1584 {
1585         int i;
1586
1587         /* HINT method: EEPROM
1588          *
1589          * This method works only for boards with eeprom.
1590          * Uses a hash of all eeprom bytes. The hash should be
1591          * unique for a vendor/tuner pair.
1592          * There are a high chance that tuners for different
1593          * video standards produce different hashes.
1594          */
1595         for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
1596                 if (dev->hash == em28xx_eeprom_hash[i].hash) {
1597                         dev->model = em28xx_eeprom_hash[i].model;
1598                         dev->tuner_type = em28xx_eeprom_hash[i].tuner;
1599
1600                         em28xx_errdev("Your board has no unique USB ID.\n");
1601                         em28xx_errdev("A hint were successfully done, "
1602                                       "based on eeprom hash.\n");
1603                         em28xx_errdev("This method is not 100%% failproof.\n");
1604                         em28xx_errdev("If the board were missdetected, "
1605                                       "please email this log to:\n");
1606                         em28xx_errdev("\tV4L Mailing List "
1607                                       " <video4linux-list@redhat.com>\n");
1608                         em28xx_errdev("Board detected as %s\n",
1609                                       em28xx_boards[dev->model].name);
1610
1611                         return 0;
1612                 }
1613         }
1614
1615         /* HINT method: I2C attached devices
1616          *
1617          * This method works for all boards.
1618          * Uses a hash of i2c scanned devices.
1619          * Devices with the same i2c attached chips will
1620          * be considered equal.
1621          * This method is less precise than the eeprom one.
1622          */
1623
1624         /* user did not request i2c scanning => do it now */
1625         if (!dev->i2c_hash)
1626                 em28xx_do_i2c_scan(dev);
1627
1628         for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
1629                 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
1630                         dev->model = em28xx_i2c_hash[i].model;
1631                         dev->tuner_type = em28xx_i2c_hash[i].tuner;
1632                         em28xx_errdev("Your board has no unique USB ID.\n");
1633                         em28xx_errdev("A hint were successfully done, "
1634                                       "based on i2c devicelist hash.\n");
1635                         em28xx_errdev("This method is not 100%% failproof.\n");
1636                         em28xx_errdev("If the board were missdetected, "
1637                                       "please email this log to:\n");
1638                         em28xx_errdev("\tV4L Mailing List "
1639                                       " <video4linux-list@redhat.com>\n");
1640                         em28xx_errdev("Board detected as %s\n",
1641                                       em28xx_boards[dev->model].name);
1642
1643                         return 0;
1644                 }
1645         }
1646
1647         em28xx_errdev("Your board has no unique USB ID and thus need a "
1648                       "hint to be detected.\n");
1649         em28xx_errdev("You may try to use card=<n> insmod option to "
1650                       "workaround that.\n");
1651         em28xx_errdev("Please send an email with this log to:\n");
1652         em28xx_errdev("\tV4L Mailing List <video4linux-list@redhat.com>\n");
1653         em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
1654         em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
1655
1656         em28xx_errdev("Here is a list of valid choices for the card=<n>"
1657                       " insmod option:\n");
1658         for (i = 0; i < em28xx_bcount; i++) {
1659                 em28xx_errdev("    card=%d -> %s\n",
1660                                 i, em28xx_boards[i].name);
1661         }
1662         return -1;
1663 }
1664
1665 /* ----------------------------------------------------------------------- */
1666 void em28xx_set_ir(struct em28xx *dev, struct IR_i2c *ir)
1667 {
1668         if (disable_ir) {
1669                 ir->get_key = NULL;
1670                 return ;
1671         }
1672
1673         /* detect & configure */
1674         switch (dev->model) {
1675         case (EM2800_BOARD_UNKNOWN):
1676                 break;
1677         case (EM2820_BOARD_UNKNOWN):
1678                 break;
1679         case (EM2800_BOARD_TERRATEC_CINERGY_200):
1680         case (EM2820_BOARD_TERRATEC_CINERGY_250):
1681                 ir->ir_codes = ir_codes_em_terratec;
1682                 ir->get_key = em28xx_get_key_terratec;
1683                 snprintf(ir->c.name, sizeof(ir->c.name),
1684                          "i2c IR (EM28XX Terratec)");
1685                 break;
1686         case (EM2820_BOARD_PINNACLE_USB_2):
1687                 ir->ir_codes = ir_codes_pinnacle_grey;
1688                 ir->get_key = em28xx_get_key_pinnacle_usb_grey;
1689                 snprintf(ir->c.name, sizeof(ir->c.name),
1690                          "i2c IR (EM28XX Pinnacle PCTV)");
1691                 break;
1692         case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2):
1693                 ir->ir_codes = ir_codes_hauppauge_new;
1694                 ir->get_key = em28xx_get_key_em_haup;
1695                 snprintf(ir->c.name, sizeof(ir->c.name),
1696                          "i2c IR (EM2840 Hauppauge)");
1697                 break;
1698         case (EM2820_BOARD_MSI_VOX_USB_2):
1699                 break;
1700         case (EM2800_BOARD_LEADTEK_WINFAST_USBII):
1701                 break;
1702         case (EM2800_BOARD_KWORLD_USB2800):
1703                 break;
1704         case (EM2800_BOARD_GRABBEEX_USB2800):
1705                 break;
1706         }
1707 }
1708
1709 void em28xx_card_setup(struct em28xx *dev)
1710 {
1711         em28xx_set_model(dev);
1712
1713         dev->tuner_type = em28xx_boards[dev->model].tuner_type;
1714         if (em28xx_boards[dev->model].tuner_addr)
1715                 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
1716
1717         /* request some modules */
1718         switch (dev->model) {
1719         case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
1720         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
1721         case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
1722         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
1723         case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
1724         {
1725                 struct tveeprom tv;
1726 #ifdef CONFIG_MODULES
1727                 request_module("tveeprom");
1728 #endif
1729                 /* Call first TVeeprom */
1730
1731                 dev->i2c_client.addr = 0xa0 >> 1;
1732                 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
1733
1734                 dev->tuner_type = tv.tuner_type;
1735
1736                 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
1737                         dev->i2s_speed = 2048000;
1738                         dev->board.has_msp34xx = 1;
1739                 }
1740 #ifdef CONFIG_MODULES
1741                 if (tv.has_ir)
1742                         request_module("ir-kbd-i2c");
1743 #endif
1744                 break;
1745         }
1746         case EM2820_BOARD_KWORLD_PVRTV2800RF:
1747                 /* GPIO enables sound on KWORLD PVR TV 2800RF */
1748                 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
1749                 break;
1750         case EM2820_BOARD_UNKNOWN:
1751         case EM2800_BOARD_UNKNOWN:
1752                 /*
1753                  * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
1754                  *
1755                  * This occurs because they share identical USB vendor and
1756                  * product IDs.
1757                  *
1758                  * What we do here is look up the EEPROM hash of the K-WORLD
1759                  * and if it is found then we decide that we do not have
1760                  * a DIGIVOX and reset the device to the K-WORLD instead.
1761                  *
1762                  * This solution is only valid if they do not share eeprom
1763                  * hash identities which has not been determined as yet.
1764                  */
1765         case EM2880_BOARD_MSI_DIGIVOX_AD:
1766                 if (!em28xx_hint_board(dev))
1767                         em28xx_set_model(dev);
1768                 break;
1769         }
1770
1771         if (dev->board.has_snapshot_button)
1772                 em28xx_register_snapshot_button(dev);
1773
1774         if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
1775                 em28xx_errdev("\n\n");
1776                 em28xx_errdev("The support for this board weren't "
1777                               "valid yet.\n");
1778                 em28xx_errdev("Please send a report of having this working\n");
1779                 em28xx_errdev("not to V4L mailing list (and/or to other "
1780                                 "addresses)\n\n");
1781         }
1782
1783         /* Allow override tuner type by a module parameter */
1784         if (tuner >= 0)
1785                 dev->tuner_type = tuner;
1786
1787 #ifdef CONFIG_MODULES
1788         /* request some modules */
1789         if (dev->board.has_msp34xx)
1790                 request_module("msp3400");
1791         if (dev->board.decoder == EM28XX_SAA711X)
1792                 request_module("saa7115");
1793         if (dev->board.decoder == EM28XX_TVP5150)
1794                 request_module("tvp5150");
1795         if (dev->board.tuner_type != TUNER_ABSENT)
1796                 request_module("tuner");
1797 #endif
1798
1799         em28xx_config_tuner(dev);
1800
1801         em28xx_ir_init(dev);
1802 }
1803