drivers/media/video/cx88/cx88-tvaudio.c

   1 /*
   2
   3     cx88x-audio.c - Conexant CX23880/23881 audio downstream driver driver
   4
   5      (c) 2001 Michael Eskin, Tom Zakrajsek [Windows version]
   6      (c) 2002 Yurij Sysoev <yurij@naturesoft.net>
   7      (c) 2003 Gerd Knorr <kraxel@bytesex.org>
   8
   9     -----------------------------------------------------------------------
  10
  11     Lot of voodoo here.  Even the data sheet doesn't help to
  12     understand what is going on here, the documentation for the audio
  13     part of the cx2388x chip is *very* bad.
  14
  15     Some of this comes from party done linux driver sources I got from
  16     [undocumented].
  17
  18     Some comes from the dscaler sources, one of the dscaler driver guy works
  19     for Conexant ...
  20
  21     -----------------------------------------------------------------------
  22
  23     This program is free software; you can redistribute it and/or modify
  24     it under the terms of the GNU General Public License as published by
  25     the Free Software Foundation; either version 2 of the License, or
  26     (at your option) any later version.
  27
  28     This program is distributed in the hope that it will be useful,
  29     but WITHOUT ANY WARRANTY; without even the implied warranty of
  30     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  31     GNU General Public License for more details.
  32
  33     You should have received a copy of the GNU General Public License
  34     along with this program; if not, write to the Free Software
  35     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  36 */
  37
  38 #include <linux/module.h>
  39 #include <linux/moduleparam.h>
  40 #include <linux/errno.h>
  41 #include <linux/kernel.h>
  42 #include <linux/slab.h>
  43 #include <linux/mm.h>
  44 #include <linux/poll.h>
  45 #include <linux/pci.h>
  46 #include <linux/signal.h>
  47 #include <linux/ioport.h>
  48 #include <linux/sched.h>
  49 #include <linux/types.h>
  50 #include <linux/interrupt.h>
  51 #include <linux/vmalloc.h>
  52 #include <linux/init.h>
  53 #include <linux/smp_lock.h>
  54 #include <linux/delay.h>
  55 #include <linux/config.h>
  56 #include <linux/kthread.h>
  57
  58 #include "cx88.h"
  59
  60 static unsigned int audio_debug = 0;
  61 module_param(audio_debug, int, 0644);
  62 MODULE_PARM_DESC(audio_debug, "enable debug messages [audio]");
  63
  64 static unsigned int always_analog = 0;
  65 module_param(always_analog,int,0644);
  66 MODULE_PARM_DESC(always_analog,"force analog audio out");
  67
  68
  69 #define dprintk(fmt, arg...)    if (audio_debug) \
  70         printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg)
  71
  72 /* ----------------------------------------------------------- */
  73
  74 static char *aud_ctl_names[64] = {
  75         [EN_BTSC_FORCE_MONO] = "BTSC_FORCE_MONO",
  76         [EN_BTSC_FORCE_STEREO] = "BTSC_FORCE_STEREO",
  77         [EN_BTSC_FORCE_SAP] = "BTSC_FORCE_SAP",
  78         [EN_BTSC_AUTO_STEREO] = "BTSC_AUTO_STEREO",
  79         [EN_BTSC_AUTO_SAP] = "BTSC_AUTO_SAP",
  80         [EN_A2_FORCE_MONO1] = "A2_FORCE_MONO1",
  81         [EN_A2_FORCE_MONO2] = "A2_FORCE_MONO2",
  82         [EN_A2_FORCE_STEREO] = "A2_FORCE_STEREO",
  83         [EN_A2_AUTO_MONO2] = "A2_AUTO_MONO2",
  84         [EN_A2_AUTO_STEREO] = "A2_AUTO_STEREO",
  85         [EN_EIAJ_FORCE_MONO1] = "EIAJ_FORCE_MONO1",
  86         [EN_EIAJ_FORCE_MONO2] = "EIAJ_FORCE_MONO2",
  87         [EN_EIAJ_FORCE_STEREO] = "EIAJ_FORCE_STEREO",
  88         [EN_EIAJ_AUTO_MONO2] = "EIAJ_AUTO_MONO2",
  89         [EN_EIAJ_AUTO_STEREO] = "EIAJ_AUTO_STEREO",
  90         [EN_NICAM_FORCE_MONO1] = "NICAM_FORCE_MONO1",
  91         [EN_NICAM_FORCE_MONO2] = "NICAM_FORCE_MONO2",
  92         [EN_NICAM_FORCE_STEREO] = "NICAM_FORCE_STEREO",
  93         [EN_NICAM_AUTO_MONO2] = "NICAM_AUTO_MONO2",
  94         [EN_NICAM_AUTO_STEREO] = "NICAM_AUTO_STEREO",
  95         [EN_FMRADIO_FORCE_MONO] = "FMRADIO_FORCE_MONO",
  96         [EN_FMRADIO_FORCE_STEREO] = "FMRADIO_FORCE_STEREO",
  97         [EN_FMRADIO_AUTO_STEREO] = "FMRADIO_AUTO_STEREO",
  98 };
  99
 100 struct rlist {
 101         u32 reg;
 102         u32 val;
 103 };
 104
 105 static void set_audio_registers(struct cx88_core *core, const struct rlist *l)
 106 {
 107         int i;
 108
 109         for (i = 0; l[i].reg; i++) {
 110                 switch (l[i].reg) {
 111                 case AUD_PDF_DDS_CNST_BYTE2:
 112                 case AUD_PDF_DDS_CNST_BYTE1:
 113                 case AUD_PDF_DDS_CNST_BYTE0:
 114                 case AUD_QAM_MODE:
 115                 case AUD_PHACC_FREQ_8MSB:
 116                 case AUD_PHACC_FREQ_8LSB:
 117                         cx_writeb(l[i].reg, l[i].val);
 118                         break;
 119                 default:
 120                         cx_write(l[i].reg, l[i].val);
 121                         break;
 122                 }
 123         }
 124 }
 125
 126 static void set_audio_start(struct cx88_core *core, u32 mode)
 127 {
 128         /* mute */
 129         cx_write(AUD_VOL_CTL, (1 << 6));
 130
 131         /* start programming */
 132         cx_write(AUD_INIT, mode);
 133         cx_write(AUD_INIT_LD, 0x0001);
 134         cx_write(AUD_SOFT_RESET, 0x0001);
 135 }
 136
 137 static void set_audio_finish(struct cx88_core *core, u32 ctl)
 138 {
 139         u32 volume;
 140
 141 #ifndef CONFIG_VIDEO_CX88_ALSA
 142         /* restart dma; This avoids buzz in NICAM and is good in others  */
 143         cx88_stop_audio_dma(core);
 144 #endif
 145         cx_write(AUD_RATE_THRES_DMD, 0x000000C0);
 146 #ifndef CONFIG_VIDEO_CX88_ALSA
 147         cx88_start_audio_dma(core);
 148 #endif
 149
 150         if (cx88_boards[core->board].blackbird) {
 151                 /* sets sound input from external adc */
 152                 switch (core->board) {
 153                 case CX88_BOARD_HAUPPAUGE_ROSLYN:
 154                 case CX88_BOARD_KWORLD_MCE200_DELUXE:
 155                 case CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT:
 156                 case CX88_BOARD_PIXELVIEW_PLAYTV_P7000:
 157                 case CX88_BOARD_ASUS_PVR_416:
 158                         cx_clear(AUD_CTL, EN_I2SIN_ENABLE);
 159                         break;
 160                 default:
 161                         cx_set(AUD_CTL, EN_I2SIN_ENABLE);
 162                 }
 163
 164                 cx_write(AUD_I2SINPUTCNTL, 4);
 165                 cx_write(AUD_BAUDRATE, 1);
 166                 /* 'pass-thru mode': this enables the i2s output to the mpeg encoder */
 167                 cx_set(AUD_CTL, EN_I2SOUT_ENABLE);
 168                 cx_write(AUD_I2SOUTPUTCNTL, 1);
 169                 cx_write(AUD_I2SCNTL, 0);
 170                 /* cx_write(AUD_APB_IN_RATE_ADJ, 0); */
 171         }
 172         if ((always_analog) || (!cx88_boards[core->board].blackbird)) {
 173                 ctl |= EN_DAC_ENABLE;
 174                 cx_write(AUD_CTL, ctl);
 175         }
 176
 177         /* finish programming */
 178         cx_write(AUD_SOFT_RESET, 0x0000);
 179
 180         /* unmute */
 181         volume = cx_sread(SHADOW_AUD_VOL_CTL);
 182         cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, volume);
 183 }
 184
 185 /* ----------------------------------------------------------- */
 186
 187 static void set_audio_standard_BTSC(struct cx88_core *core, unsigned int sap,
 188                                     u32 mode)
 189 {
 190         static const struct rlist btsc[] = {
 191                 {AUD_AFE_12DB_EN, 0x00000001},
 192                 {AUD_OUT1_SEL, 0x00000013},
 193                 {AUD_OUT1_SHIFT, 0x00000000},
 194                 {AUD_POLY0_DDS_CONSTANT, 0x0012010c},
 195                 {AUD_DMD_RA_DDS, 0x00c3e7aa},
 196                 {AUD_DBX_IN_GAIN, 0x00004734},
 197                 {AUD_DBX_WBE_GAIN, 0x00004640},
 198                 {AUD_DBX_SE_GAIN, 0x00008d31},
 199                 {AUD_DCOC_0_SRC, 0x0000001a},
 200                 {AUD_IIR1_4_SEL, 0x00000021},
 201                 {AUD_DCOC_PASS_IN, 0x00000003},
 202                 {AUD_DCOC_0_SHIFT_IN0, 0x0000000a},
 203                 {AUD_DCOC_0_SHIFT_IN1, 0x00000008},
 204                 {AUD_DCOC_1_SHIFT_IN0, 0x0000000a},
 205                 {AUD_DCOC_1_SHIFT_IN1, 0x00000008},
 206                 {AUD_DN0_FREQ, 0x0000283b},
 207                 {AUD_DN2_SRC_SEL, 0x00000008},
 208                 {AUD_DN2_FREQ, 0x00003000},
 209                 {AUD_DN2_AFC, 0x00000002},
 210                 {AUD_DN2_SHFT, 0x00000000},
 211                 {AUD_IIR2_2_SEL, 0x00000020},
 212                 {AUD_IIR2_2_SHIFT, 0x00000000},
 213                 {AUD_IIR2_3_SEL, 0x0000001f},
 214                 {AUD_IIR2_3_SHIFT, 0x00000000},
 215                 {AUD_CRDC1_SRC_SEL, 0x000003ce},
 216                 {AUD_CRDC1_SHIFT, 0x00000000},
 217                 {AUD_CORDIC_SHIFT_1, 0x00000007},
 218                 {AUD_DCOC_1_SRC, 0x0000001b},
 219                 {AUD_DCOC1_SHIFT, 0x00000000},
 220                 {AUD_RDSI_SEL, 0x00000008},
 221                 {AUD_RDSQ_SEL, 0x00000008},
 222                 {AUD_RDSI_SHIFT, 0x00000000},
 223                 {AUD_RDSQ_SHIFT, 0x00000000},
 224                 {AUD_POLYPH80SCALEFAC, 0x00000003},
 225                 { /* end of list */ },
 226         };
 227         static const struct rlist btsc_sap[] = {
 228                 {AUD_AFE_12DB_EN, 0x00000001},
 229                 {AUD_DBX_IN_GAIN, 0x00007200},
 230                 {AUD_DBX_WBE_GAIN, 0x00006200},
 231                 {AUD_DBX_SE_GAIN, 0x00006200},
 232                 {AUD_IIR1_1_SEL, 0x00000000},
 233                 {AUD_IIR1_3_SEL, 0x00000001},
 234                 {AUD_DN1_SRC_SEL, 0x00000007},
 235                 {AUD_IIR1_4_SHIFT, 0x00000006},
 236                 {AUD_IIR2_1_SHIFT, 0x00000000},
 237                 {AUD_IIR2_2_SHIFT, 0x00000000},
 238                 {AUD_IIR3_0_SHIFT, 0x00000000},
 239                 {AUD_IIR3_1_SHIFT, 0x00000000},
 240                 {AUD_IIR3_0_SEL, 0x0000000d},
 241                 {AUD_IIR3_1_SEL, 0x0000000e},
 242                 {AUD_DEEMPH1_SRC_SEL, 0x00000014},
 243                 {AUD_DEEMPH1_SHIFT, 0x00000000},
 244                 {AUD_DEEMPH1_G0, 0x00004000},
 245                 {AUD_DEEMPH1_A0, 0x00000000},
 246                 {AUD_DEEMPH1_B0, 0x00000000},
 247                 {AUD_DEEMPH1_A1, 0x00000000},
 248                 {AUD_DEEMPH1_B1, 0x00000000},
 249                 {AUD_OUT0_SEL, 0x0000003f},
 250                 {AUD_OUT1_SEL, 0x0000003f},
 251                 {AUD_DN1_AFC, 0x00000002},
 252                 {AUD_DCOC_0_SHIFT_IN0, 0x0000000a},
 253                 {AUD_DCOC_0_SHIFT_IN1, 0x00000008},
 254                 {AUD_DCOC_1_SHIFT_IN0, 0x0000000a},
 255                 {AUD_DCOC_1_SHIFT_IN1, 0x00000008},
 256                 {AUD_IIR1_0_SEL, 0x0000001d},
 257                 {AUD_IIR1_2_SEL, 0x0000001e},
 258                 {AUD_IIR2_1_SEL, 0x00000002},
 259                 {AUD_IIR2_2_SEL, 0x00000004},
 260                 {AUD_IIR3_2_SEL, 0x0000000f},
 261                 {AUD_DCOC2_SHIFT, 0x00000001},
 262                 {AUD_IIR3_2_SHIFT, 0x00000001},
 263                 {AUD_DEEMPH0_SRC_SEL, 0x00000014},
 264                 {AUD_CORDIC_SHIFT_1, 0x00000006},
 265                 {AUD_POLY0_DDS_CONSTANT, 0x000e4db2},
 266                 {AUD_DMD_RA_DDS, 0x00f696e6},
 267                 {AUD_IIR2_3_SEL, 0x00000025},
 268                 {AUD_IIR1_4_SEL, 0x00000021},
 269                 {AUD_DN1_FREQ, 0x0000c965},
 270                 {AUD_DCOC_PASS_IN, 0x00000003},
 271                 {AUD_DCOC_0_SRC, 0x0000001a},
 272                 {AUD_DCOC_1_SRC, 0x0000001b},
 273                 {AUD_DCOC1_SHIFT, 0x00000000},
 274                 {AUD_RDSI_SEL, 0x00000009},
 275                 {AUD_RDSQ_SEL, 0x00000009},
 276                 {AUD_RDSI_SHIFT, 0x00000000},
 277                 {AUD_RDSQ_SHIFT, 0x00000000},
 278                 {AUD_POLYPH80SCALEFAC, 0x00000003},
 279                 { /* end of list */ },
 280         };
 281
 282         mode |= EN_FMRADIO_EN_RDS;
 283
 284         if (sap) {
 285                 dprintk("%s SAP (status: unknown)\n", __FUNCTION__);
 286                 set_audio_start(core, SEL_SAP);
 287                 set_audio_registers(core, btsc_sap);
 288                 set_audio_finish(core, mode);
 289         } else {
 290                 dprintk("%s (status: known-good)\n", __FUNCTION__);
 291                 set_audio_start(core, SEL_BTSC);
 292                 set_audio_registers(core, btsc);
 293                 set_audio_finish(core, mode);
 294         }
 295 }
 296
 297 static void set_audio_standard_NICAM(struct cx88_core *core, u32 mode)
 298 {
 299         static const struct rlist nicam_l[] = {
 300                 {AUD_AFE_12DB_EN, 0x00000001},
 301                 {AUD_RATE_ADJ1, 0x00000060},
 302                 {AUD_RATE_ADJ2, 0x000000F9},
 303                 {AUD_RATE_ADJ3, 0x000001CC},
 304                 {AUD_RATE_ADJ4, 0x000002B3},
 305                 {AUD_RATE_ADJ5, 0x00000726},
 306                 {AUD_DEEMPHDENOM1_R, 0x0000F3D0},
 307                 {AUD_DEEMPHDENOM2_R, 0x00000000},
 308                 {AUD_ERRLOGPERIOD_R, 0x00000064},
 309                 {AUD_ERRINTRPTTHSHLD1_R, 0x00000FFF},
 310                 {AUD_ERRINTRPTTHSHLD2_R, 0x0000001F},
 311                 {AUD_ERRINTRPTTHSHLD3_R, 0x0000000F},
 312                 {AUD_POLYPH80SCALEFAC, 0x00000003},
 313                 {AUD_DMD_RA_DDS, 0x00C00000},
 314                 {AUD_PLL_INT, 0x0000001E},
 315                 {AUD_PLL_DDS, 0x00000000},
 316                 {AUD_PLL_FRAC, 0x0000E542},
 317                 {AUD_START_TIMER, 0x00000000},
 318                 {AUD_DEEMPHNUMER1_R, 0x000353DE},
 319                 {AUD_DEEMPHNUMER2_R, 0x000001B1},
 320                 {AUD_PDF_DDS_CNST_BYTE2, 0x06},
 321                 {AUD_PDF_DDS_CNST_BYTE1, 0x82},
 322                 {AUD_PDF_DDS_CNST_BYTE0, 0x12},
 323                 {AUD_QAM_MODE, 0x05},
 324                 {AUD_PHACC_FREQ_8MSB, 0x34},
 325                 {AUD_PHACC_FREQ_8LSB, 0x4C},
 326                 {AUD_DEEMPHGAIN_R, 0x00006680},
 327                 {AUD_RATE_THRES_DMD, 0x000000C0},
 328                 { /* end of list */ },
 329         };
 330
 331         static const struct rlist nicam_bgdki_common[] = {
 332                 {AUD_AFE_12DB_EN, 0x00000001},
 333                 {AUD_RATE_ADJ1, 0x00000010},
 334                 {AUD_RATE_ADJ2, 0x00000040},
 335                 {AUD_RATE_ADJ3, 0x00000100},
 336                 {AUD_RATE_ADJ4, 0x00000400},
 337                 {AUD_RATE_ADJ5, 0x00001000},
 338                 {AUD_ERRLOGPERIOD_R, 0x00000fff},
 339                 {AUD_ERRINTRPTTHSHLD1_R, 0x000003ff},
 340                 {AUD_ERRINTRPTTHSHLD2_R, 0x000000ff},
 341                 {AUD_ERRINTRPTTHSHLD3_R, 0x0000003f},
 342                 {AUD_POLYPH80SCALEFAC, 0x00000003},
 343                 {AUD_DEEMPHGAIN_R, 0x000023c2},
 344                 {AUD_DEEMPHNUMER1_R, 0x0002a7bc},
 345                 {AUD_DEEMPHNUMER2_R, 0x0003023e},
 346                 {AUD_DEEMPHDENOM1_R, 0x0000f3d0},
 347                 {AUD_DEEMPHDENOM2_R, 0x00000000},
 348                 {AUD_PDF_DDS_CNST_BYTE2, 0x06},
 349                 {AUD_PDF_DDS_CNST_BYTE1, 0x82},
 350                 {AUD_QAM_MODE, 0x05},
 351                 { /* end of list */ },
 352         };
 353
 354         static const struct rlist nicam_i[] = {
 355                 {AUD_PDF_DDS_CNST_BYTE0, 0x12},
 356                 {AUD_PHACC_FREQ_8MSB, 0x3a},
 357                 {AUD_PHACC_FREQ_8LSB, 0x93},
 358                 { /* end of list */ },
 359         };
 360
 361         static const struct rlist nicam_default[] = {
 362                 {AUD_PDF_DDS_CNST_BYTE0, 0x16},
 363                 {AUD_PHACC_FREQ_8MSB, 0x34},
 364                 {AUD_PHACC_FREQ_8LSB, 0x4c},
 365                 { /* end of list */ },
 366         };
 367
 368         set_audio_start(core,SEL_NICAM);
 369         switch (core->tvaudio) {
 370         case WW_L:
 371                 dprintk("%s SECAM-L NICAM (status: devel)\n", __FUNCTION__);
 372                 set_audio_registers(core, nicam_l);
 373                 break;
 374         case WW_I:
 375                 dprintk("%s PAL-I NICAM (status: known-good)\n", __FUNCTION__);
 376                 set_audio_registers(core, nicam_bgdki_common);
 377                 set_audio_registers(core, nicam_i);
 378                 break;
 379         default:
 380                 dprintk("%s PAL-BGDK NICAM (status: known-good)\n", __FUNCTION__);
 381                 set_audio_registers(core, nicam_bgdki_common);
 382                 set_audio_registers(core, nicam_default);
 383                 break;
 384         };
 385
 386         mode |= EN_DMTRX_LR | EN_DMTRX_BYPASS;
 387         set_audio_finish(core, mode);
 388 }
 389
 390 static void set_audio_standard_A2(struct cx88_core *core, u32 mode)
 391 {
 392         static const struct rlist a2_bgdk_common[] = {
 393                 {AUD_ERRLOGPERIOD_R, 0x00000064},
 394                 {AUD_ERRINTRPTTHSHLD1_R, 0x00000fff},
 395                 {AUD_ERRINTRPTTHSHLD2_R, 0x0000001f},
 396                 {AUD_ERRINTRPTTHSHLD3_R, 0x0000000f},
 397                 {AUD_PDF_DDS_CNST_BYTE2, 0x06},
 398                 {AUD_PDF_DDS_CNST_BYTE1, 0x82},
 399                 {AUD_PDF_DDS_CNST_BYTE0, 0x12},
 400                 {AUD_QAM_MODE, 0x05},
 401                 {AUD_PHACC_FREQ_8MSB, 0x34},
 402                 {AUD_PHACC_FREQ_8LSB, 0x4c},
 403                 {AUD_RATE_ADJ1, 0x00000100},
 404                 {AUD_RATE_ADJ2, 0x00000200},
 405                 {AUD_RATE_ADJ3, 0x00000300},
 406                 {AUD_RATE_ADJ4, 0x00000400},
 407                 {AUD_RATE_ADJ5, 0x00000500},
 408                 {AUD_THR_FR, 0x00000000},
 409                 {AAGC_HYST, 0x0000001a},
 410                 {AUD_PILOT_BQD_1_K0, 0x0000755b},
 411                 {AUD_PILOT_BQD_1_K1, 0x00551340},
 412                 {AUD_PILOT_BQD_1_K2, 0x006d30be},
 413                 {AUD_PILOT_BQD_1_K3, 0xffd394af},
 414                 {AUD_PILOT_BQD_1_K4, 0x00400000},
 415                 {AUD_PILOT_BQD_2_K0, 0x00040000},
 416                 {AUD_PILOT_BQD_2_K1, 0x002a4841},
 417                 {AUD_PILOT_BQD_2_K2, 0x00400000},
 418                 {AUD_PILOT_BQD_2_K3, 0x00000000},
 419                 {AUD_PILOT_BQD_2_K4, 0x00000000},
 420                 {AUD_MODE_CHG_TIMER, 0x00000040},
 421                 {AUD_AFE_12DB_EN, 0x00000001},
 422                 {AUD_CORDIC_SHIFT_0, 0x00000007},
 423                 {AUD_CORDIC_SHIFT_1, 0x00000007},
 424                 {AUD_DEEMPH0_G0, 0x00000380},
 425                 {AUD_DEEMPH1_G0, 0x00000380},
 426                 {AUD_DCOC_0_SRC, 0x0000001a},
 427                 {AUD_DCOC0_SHIFT, 0x00000000},
 428                 {AUD_DCOC_0_SHIFT_IN0, 0x0000000a},
 429                 {AUD_DCOC_0_SHIFT_IN1, 0x00000008},
 430                 {AUD_DCOC_PASS_IN, 0x00000003},
 431                 {AUD_IIR3_0_SEL, 0x00000021},
 432                 {AUD_DN2_AFC, 0x00000002},
 433                 {AUD_DCOC_1_SRC, 0x0000001b},
 434                 {AUD_DCOC1_SHIFT, 0x00000000},
 435                 {AUD_DCOC_1_SHIFT_IN0, 0x0000000a},
 436                 {AUD_DCOC_1_SHIFT_IN1, 0x00000008},
 437                 {AUD_IIR3_1_SEL, 0x00000023},
 438                 {AUD_RDSI_SEL, 0x00000017},
 439                 {AUD_RDSI_SHIFT, 0x00000000},
 440                 {AUD_RDSQ_SEL, 0x00000017},
 441                 {AUD_RDSQ_SHIFT, 0x00000000},
 442                 {AUD_PLL_INT, 0x0000001e},
 443                 {AUD_PLL_DDS, 0x00000000},
 444                 {AUD_PLL_FRAC, 0x0000e542},
 445                 {AUD_POLYPH80SCALEFAC, 0x00000001},
 446                 {AUD_START_TIMER, 0x00000000},
 447                 { /* end of list */ },
 448         };
 449
 450         static const struct rlist a2_bg[] = {
 451                 {AUD_DMD_RA_DDS, 0x002a4f2f},
 452                 {AUD_C1_UP_THR, 0x00007000},
 453                 {AUD_C1_LO_THR, 0x00005400},
 454                 {AUD_C2_UP_THR, 0x00005400},
 455                 {AUD_C2_LO_THR, 0x00003000},
 456                 { /* end of list */ },
 457         };
 458
 459         static const struct rlist a2_dk[] = {
 460                 {AUD_DMD_RA_DDS, 0x002a4f2f},
 461                 {AUD_C1_UP_THR, 0x00007000},
 462                 {AUD_C1_LO_THR, 0x00005400},
 463                 {AUD_C2_UP_THR, 0x00005400},
 464                 {AUD_C2_LO_THR, 0x00003000},
 465                 {AUD_DN0_FREQ, 0x00003a1c},
 466                 {AUD_DN2_FREQ, 0x0000d2e0},
 467                 { /* end of list */ },
 468         };
 469
 470         static const struct rlist a1_i[] = {
 471                 {AUD_ERRLOGPERIOD_R, 0x00000064},
 472                 {AUD_ERRINTRPTTHSHLD1_R, 0x00000fff},
 473                 {AUD_ERRINTRPTTHSHLD2_R, 0x0000001f},
 474                 {AUD_ERRINTRPTTHSHLD3_R, 0x0000000f},
 475                 {AUD_PDF_DDS_CNST_BYTE2, 0x06},
 476                 {AUD_PDF_DDS_CNST_BYTE1, 0x82},
 477                 {AUD_PDF_DDS_CNST_BYTE0, 0x12},
 478                 {AUD_QAM_MODE, 0x05},
 479                 {AUD_PHACC_FREQ_8MSB, 0x3a},
 480                 {AUD_PHACC_FREQ_8LSB, 0x93},
 481                 {AUD_DMD_RA_DDS, 0x002a4f2f},
 482                 {AUD_PLL_INT, 0x0000001e},
 483                 {AUD_PLL_DDS, 0x00000004},
 484                 {AUD_PLL_FRAC, 0x0000e542},
 485                 {AUD_RATE_ADJ1, 0x00000100},
 486                 {AUD_RATE_ADJ2, 0x00000200},
 487                 {AUD_RATE_ADJ3, 0x00000300},
 488                 {AUD_RATE_ADJ4, 0x00000400},
 489                 {AUD_RATE_ADJ5, 0x00000500},
 490                 {AUD_THR_FR, 0x00000000},
 491                 {AUD_PILOT_BQD_1_K0, 0x0000755b},
 492                 {AUD_PILOT_BQD_1_K1, 0x00551340},
 493                 {AUD_PILOT_BQD_1_K2, 0x006d30be},
 494                 {AUD_PILOT_BQD_1_K3, 0xffd394af},
 495                 {AUD_PILOT_BQD_1_K4, 0x00400000},
 496                 {AUD_PILOT_BQD_2_K0, 0x00040000},
 497                 {AUD_PILOT_BQD_2_K1, 0x002a4841},
 498                 {AUD_PILOT_BQD_2_K2, 0x00400000},
 499                 {AUD_PILOT_BQD_2_K3, 0x00000000},
 500                 {AUD_PILOT_BQD_2_K4, 0x00000000},
 501                 {AUD_MODE_CHG_TIMER, 0x00000060},
 502                 {AUD_AFE_12DB_EN, 0x00000001},
 503                 {AAGC_HYST, 0x0000000a},
 504                 {AUD_CORDIC_SHIFT_0, 0x00000007},
 505                 {AUD_CORDIC_SHIFT_1, 0x00000007},
 506                 {AUD_C1_UP_THR, 0x00007000},
 507                 {AUD_C1_LO_THR, 0x00005400},
 508                 {AUD_C2_UP_THR, 0x00005400},
 509                 {AUD_C2_LO_THR, 0x00003000},
 510                 {AUD_DCOC_0_SRC, 0x0000001a},
 511                 {AUD_DCOC0_SHIFT, 0x00000000},
 512                 {AUD_DCOC_0_SHIFT_IN0, 0x0000000a},
 513                 {AUD_DCOC_0_SHIFT_IN1, 0x00000008},
 514                 {AUD_DCOC_PASS_IN, 0x00000003},
 515                 {AUD_IIR3_0_SEL, 0x00000021},
 516                 {AUD_DN2_AFC, 0x00000002},
 517                 {AUD_DCOC_1_SRC, 0x0000001b},
 518                 {AUD_DCOC1_SHIFT, 0x00000000},
 519                 {AUD_DCOC_1_SHIFT_IN0, 0x0000000a},
 520                 {AUD_DCOC_1_SHIFT_IN1, 0x00000008},
 521                 {AUD_IIR3_1_SEL, 0x00000023},
 522                 {AUD_DN0_FREQ, 0x000035a3},
 523                 {AUD_DN2_FREQ, 0x000029c7},
 524                 {AUD_CRDC0_SRC_SEL, 0x00000511},
 525                 {AUD_IIR1_0_SEL, 0x00000001},
 526                 {AUD_IIR1_1_SEL, 0x00000000},
 527                 {AUD_IIR3_2_SEL, 0x00000003},
 528                 {AUD_IIR3_2_SHIFT, 0x00000000},
 529                 {AUD_IIR3_0_SEL, 0x00000002},
 530                 {AUD_IIR2_0_SEL, 0x00000021},
 531                 {AUD_IIR2_0_SHIFT, 0x00000002},
 532                 {AUD_DEEMPH0_SRC_SEL, 0x0000000b},
 533                 {AUD_DEEMPH1_SRC_SEL, 0x0000000b},
 534                 {AUD_POLYPH80SCALEFAC, 0x00000001},
 535                 {AUD_START_TIMER, 0x00000000},
 536                 { /* end of list */ },
 537         };
 538
 539         static const struct rlist am_l[] = {
 540                 {AUD_ERRLOGPERIOD_R, 0x00000064},
 541                 {AUD_ERRINTRPTTHSHLD1_R, 0x00000FFF},
 542                 {AUD_ERRINTRPTTHSHLD2_R, 0x0000001F},
 543                 {AUD_ERRINTRPTTHSHLD3_R, 0x0000000F},
 544                 {AUD_PDF_DDS_CNST_BYTE2, 0x48},
 545                 {AUD_PDF_DDS_CNST_BYTE1, 0x3D},
 546                 {AUD_QAM_MODE, 0x00},
 547                 {AUD_PDF_DDS_CNST_BYTE0, 0xf5},
 548                 {AUD_PHACC_FREQ_8MSB, 0x3a},
 549                 {AUD_PHACC_FREQ_8LSB, 0x4a},
 550                 {AUD_DEEMPHGAIN_R, 0x00006680},
 551                 {AUD_DEEMPHNUMER1_R, 0x000353DE},
 552                 {AUD_DEEMPHNUMER2_R, 0x000001B1},
 553                 {AUD_DEEMPHDENOM1_R, 0x0000F3D0},
 554                 {AUD_DEEMPHDENOM2_R, 0x00000000},
 555                 {AUD_FM_MODE_ENABLE, 0x00000007},
 556                 {AUD_POLYPH80SCALEFAC, 0x00000003},
 557                 {AUD_AFE_12DB_EN, 0x00000001},
 558                 {AAGC_GAIN, 0x00000000},
 559                 {AAGC_HYST, 0x00000018},
 560                 {AAGC_DEF, 0x00000020},
 561                 {AUD_DN0_FREQ, 0x00000000},
 562                 {AUD_POLY0_DDS_CONSTANT, 0x000E4DB2},
 563                 {AUD_DCOC_0_SRC, 0x00000021},
 564                 {AUD_IIR1_0_SEL, 0x00000000},
 565                 {AUD_IIR1_0_SHIFT, 0x00000007},
 566                 {AUD_IIR1_1_SEL, 0x00000002},
 567                 {AUD_IIR1_1_SHIFT, 0x00000000},
 568                 {AUD_DCOC_1_SRC, 0x00000003},
 569                 {AUD_DCOC1_SHIFT, 0x00000000},
 570                 {AUD_DCOC_PASS_IN, 0x00000000},
 571                 {AUD_IIR1_2_SEL, 0x00000023},
 572                 {AUD_IIR1_2_SHIFT, 0x00000000},
 573                 {AUD_IIR1_3_SEL, 0x00000004},
 574                 {AUD_IIR1_3_SHIFT, 0x00000007},
 575                 {AUD_IIR1_4_SEL, 0x00000005},
 576                 {AUD_IIR1_4_SHIFT, 0x00000007},
 577                 {AUD_IIR3_0_SEL, 0x00000007},
 578                 {AUD_IIR3_0_SHIFT, 0x00000000},
 579                 {AUD_DEEMPH0_SRC_SEL, 0x00000011},
 580                 {AUD_DEEMPH0_SHIFT, 0x00000000},
 581                 {AUD_DEEMPH0_G0, 0x00007000},
 582                 {AUD_DEEMPH0_A0, 0x00000000},
 583                 {AUD_DEEMPH0_B0, 0x00000000},
 584                 {AUD_DEEMPH0_A1, 0x00000000},
 585                 {AUD_DEEMPH0_B1, 0x00000000},
 586                 {AUD_DEEMPH1_SRC_SEL, 0x00000011},
 587                 {AUD_DEEMPH1_SHIFT, 0x00000000},
 588                 {AUD_DEEMPH1_G0, 0x00007000},
 589                 {AUD_DEEMPH1_A0, 0x00000000},
 590                 {AUD_DEEMPH1_B0, 0x00000000},
 591                 {AUD_DEEMPH1_A1, 0x00000000},
 592                 {AUD_DEEMPH1_B1, 0x00000000},
 593                 {AUD_OUT0_SEL, 0x0000003F},
 594                 {AUD_OUT1_SEL, 0x0000003F},
 595                 {AUD_DMD_RA_DDS, 0x00F5C285},
 596                 {AUD_PLL_INT, 0x0000001E},
 597                 {AUD_PLL_DDS, 0x00000000},
 598                 {AUD_PLL_FRAC, 0x0000E542},
 599                 {AUD_RATE_ADJ1, 0x00000100},
 600                 {AUD_RATE_ADJ2, 0x00000200},
 601                 {AUD_RATE_ADJ3, 0x00000300},
 602                 {AUD_RATE_ADJ4, 0x00000400},
 603                 {AUD_RATE_ADJ5, 0x00000500},
 604                 {AUD_RATE_THRES_DMD, 0x000000C0},
 605                 { /* end of list */ },
 606         };
 607
 608         static const struct rlist a2_deemph50[] = {
 609                 {AUD_DEEMPH0_G0, 0x00000380},
 610                 {AUD_DEEMPH1_G0, 0x00000380},
 611                 {AUD_DEEMPHGAIN_R, 0x000011e1},
 612                 {AUD_DEEMPHNUMER1_R, 0x0002a7bc},
 613                 {AUD_DEEMPHNUMER2_R, 0x0003023c},
 614                 { /* end of list */ },
 615         };
 616
 617         set_audio_start(core, SEL_A2);
 618         switch (core->tvaudio) {
 619         case WW_BG:
 620                 dprintk("%s PAL-BG A1/2 (status: known-good)\n", __FUNCTION__);
 621                 set_audio_registers(core, a2_bgdk_common);
 622                 set_audio_registers(core, a2_bg);
 623                 set_audio_registers(core, a2_deemph50);
 624                 break;
 625         case WW_DK:
 626                 dprintk("%s PAL-DK A1/2 (status: known-good)\n", __FUNCTION__);
 627                 set_audio_registers(core, a2_bgdk_common);
 628                 set_audio_registers(core, a2_dk);
 629                 set_audio_registers(core, a2_deemph50);
 630                 break;
 631         case WW_I:
 632                 dprintk("%s PAL-I A1 (status: known-good)\n", __FUNCTION__);
 633                 set_audio_registers(core, a1_i);
 634                 set_audio_registers(core, a2_deemph50);
 635                 break;
 636         case WW_L:
 637                 dprintk("%s AM-L (status: devel)\n", __FUNCTION__);
 638                 set_audio_registers(core, am_l);
 639                 break;
 640         default:
 641                 dprintk("%s Warning: wrong value\n", __FUNCTION__);
 642                 return;
 643                 break;
 644         };
 645
 646         mode |= EN_FMRADIO_EN_RDS | EN_DMTRX_SUMDIFF;
 647         set_audio_finish(core, mode);
 648 }
 649
 650 static void set_audio_standard_EIAJ(struct cx88_core *core)
 651 {
 652         static const struct rlist eiaj[] = {
 653                 /* TODO: eiaj register settings are not there yet ... */
 654
 655                 { /* end of list */ },
 656         };
 657         dprintk("%s (status: unknown)\n", __FUNCTION__);
 658
 659         set_audio_start(core, SEL_EIAJ);
 660         set_audio_registers(core, eiaj);
 661         set_audio_finish(core, EN_EIAJ_AUTO_STEREO);
 662 }
 663
 664 static void set_audio_standard_FM(struct cx88_core *core,
 665                                   enum cx88_deemph_type deemph)
 666 {
 667         static const struct rlist fm_deemph_50[] = {
 668                 {AUD_DEEMPH0_G0, 0x0C45},
 669                 {AUD_DEEMPH0_A0, 0x6262},
 670                 {AUD_DEEMPH0_B0, 0x1C29},
 671                 {AUD_DEEMPH0_A1, 0x3FC66},
 672                 {AUD_DEEMPH0_B1, 0x399A},
 673
 674                 {AUD_DEEMPH1_G0, 0x0D80},
 675                 {AUD_DEEMPH1_A0, 0x6262},
 676                 {AUD_DEEMPH1_B0, 0x1C29},
 677                 {AUD_DEEMPH1_A1, 0x3FC66},
 678                 {AUD_DEEMPH1_B1, 0x399A},
 679
 680                 {AUD_POLYPH80SCALEFAC, 0x0003},
 681                 { /* end of list */ },
 682         };
 683         static const struct rlist fm_deemph_75[] = {
 684                 {AUD_DEEMPH0_G0, 0x091B},
 685                 {AUD_DEEMPH0_A0, 0x6B68},
 686                 {AUD_DEEMPH0_B0, 0x11EC},
 687                 {AUD_DEEMPH0_A1, 0x3FC66},
 688                 {AUD_DEEMPH0_B1, 0x399A},
 689
 690                 {AUD_DEEMPH1_G0, 0x0AA0},
 691                 {AUD_DEEMPH1_A0, 0x6B68},
 692                 {AUD_DEEMPH1_B0, 0x11EC},
 693                 {AUD_DEEMPH1_A1, 0x3FC66},
 694                 {AUD_DEEMPH1_B1, 0x399A},
 695
 696                 {AUD_POLYPH80SCALEFAC, 0x0003},
 697                 { /* end of list */ },
 698         };
 699
 700         /* It is enough to leave default values? */
 701         static const struct rlist fm_no_deemph[] = {
 702
 703                 {AUD_POLYPH80SCALEFAC, 0x0003},
 704                 { /* end of list */ },
 705         };
 706
 707         dprintk("%s (status: unknown)\n", __FUNCTION__);
 708         set_audio_start(core, SEL_FMRADIO);
 709
 710         switch (deemph) {
 711         case FM_NO_DEEMPH:
 712                 set_audio_registers(core, fm_no_deemph);
 713                 break;
 714
 715         case FM_DEEMPH_50:
 716                 set_audio_registers(core, fm_deemph_50);
 717                 break;
 718
 719         case FM_DEEMPH_75:
 720                 set_audio_registers(core, fm_deemph_75);
 721                 break;
 722         }
 723
 724         set_audio_finish(core, EN_FMRADIO_AUTO_STEREO);
 725 }
 726
 727 /* ----------------------------------------------------------- */
 728
 729 static int cx88_detect_nicam(struct cx88_core *core)
 730 {
 731         int i, j = 0;
 732
 733         dprintk("start nicam autodetect.\n");
 734
 735         for (i = 0; i < 6; i++) {
 736                 /* if bit1=1 then nicam is detected */
 737                 j += ((cx_read(AUD_NICAM_STATUS2) & 0x02) >> 1);
 738
 739                 if (j == 1) {
 740                         dprintk("nicam is detected.\n");
 741                         return 1;
 742                 }
 743
 744                 /* wait a little bit for next reading status */
 745                 msleep(10);
 746         }
 747
 748         dprintk("nicam is not detected.\n");
 749         return 0;
 750 }
 751
 752 void cx88_set_tvaudio(struct cx88_core *core)
 753 {
 754         switch (core->tvaudio) {
 755         case WW_BTSC:
 756                 set_audio_standard_BTSC(core, 0, EN_BTSC_AUTO_STEREO);
 757                 break;
 758         case WW_BG:
 759         case WW_DK:
 760         case WW_I:
 761         case WW_L:
 762                 /* prepare all dsp registers */
 763                 set_audio_standard_A2(core, EN_A2_FORCE_MONO1);
 764
 765                 /* set nicam mode - otherwise
 766                    AUD_NICAM_STATUS2 contains wrong values */
 767                 set_audio_standard_NICAM(core, EN_NICAM_AUTO_STEREO);
 768                 if (0 == cx88_detect_nicam(core)) {
 769                         /* fall back to fm / am mono */
 770                         set_audio_standard_A2(core, EN_A2_FORCE_MONO1);
 771                         core->use_nicam = 0;
 772                 } else {
 773                         core->use_nicam = 1;
 774                 }
 775                 break;
 776         case WW_EIAJ:
 777                 set_audio_standard_EIAJ(core);
 778                 break;
 779         case WW_FM:
 780                 set_audio_standard_FM(core, FM_NO_DEEMPH);
 781                 break;
 782         case WW_NONE:
 783         default:
 784                 printk("%s/0: unknown tv audio mode [%d]\n",
 785                        core->name, core->tvaudio);
 786                 break;
 787         }
 788         return;
 789 }
 790
 791 void cx88_newstation(struct cx88_core *core)
 792 {
 793         core->audiomode_manual = UNSET;
 794 }
 795
 796 void cx88_get_stereo(struct cx88_core *core, struct v4l2_tuner *t)
 797 {
 798         static char *m[] = { "stereo", "dual mono", "mono", "sap" };
 799         static char *p[] = { "no pilot", "pilot c1", "pilot c2", "?" };
 800         u32 reg, mode, pilot;
 801
 802         reg = cx_read(AUD_STATUS);
 803         mode = reg & 0x03;
 804         pilot = (reg >> 2) & 0x03;
 805
 806         if (core->astat != reg)
 807                 dprintk("AUD_STATUS: 0x%x [%s/%s] ctl=%s\n",
 808                         reg, m[mode], p[pilot],
 809                         aud_ctl_names[cx_read(AUD_CTL) & 63]);
 810         core->astat = reg;
 811
 812 /* TODO
 813        Reading from AUD_STATUS is not enough
 814        for auto-detecting sap/dual-fm/nicam.
 815        Add some code here later.
 816 */
 817
 818 # if 0
 819         t->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_SAP |
 820             V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
 821         t->rxsubchans = V4L2_TUNER_SUB_MONO;
 822         t->audmode = V4L2_TUNER_MODE_MONO;
 823
 824         switch (core->tvaudio) {
 825         case WW_BTSC:
 826                 t->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_SAP;
 827                 t->rxsubchans = V4L2_TUNER_SUB_STEREO;
 828                 if (1 == pilot) {
 829                         /* SAP */
 830                         t->rxsubchans |= V4L2_TUNER_SUB_SAP;
 831                 }
 832                 break;
 833         case WW_A2_BG:
 834         case WW_A2_DK:
 835         case WW_A2_M:
 836                 if (1 == pilot) {
 837                         /* stereo */
 838                         t->rxsubchans =
 839                             V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
 840                         if (0 == mode)
 841                                 t->audmode = V4L2_TUNER_MODE_STEREO;
 842                 }
 843                 if (2 == pilot) {
 844                         /* dual language -- FIXME */
 845                         t->rxsubchans =
 846                             V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
 847                         t->audmode = V4L2_TUNER_MODE_LANG1;
 848                 }
 849                 break;
 850         case WW_NICAM_BGDKL:
 851                 if (0 == mode) {
 852                         t->audmode = V4L2_TUNER_MODE_STEREO;
 853                         t->rxsubchans |= V4L2_TUNER_SUB_STEREO;
 854                 }
 855                 break;
 856         case WW_SYSTEM_L_AM:
 857                 if (0x0 == mode && !(cx_read(AUD_INIT) & 0x04)) {
 858                         t->audmode = V4L2_TUNER_MODE_STEREO;
 859                         t->rxsubchans |= V4L2_TUNER_SUB_STEREO;
 860                 }
 861                 break;
 862         default:
 863                 /* nothing */
 864                 break;
 865         }
 866 # endif
 867         return;
 868 }
 869
 870 void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual)
 871 {
 872         u32 ctl = UNSET;
 873         u32 mask = UNSET;
 874
 875         if (manual) {
 876                 core->audiomode_manual = mode;
 877         } else {
 878                 if (UNSET != core->audiomode_manual)
 879                         return;
 880         }
 881         core->audiomode_current = mode;
 882
 883         switch (core->tvaudio) {
 884         case WW_BTSC:
 885                 switch (mode) {
 886                 case V4L2_TUNER_MODE_MONO:
 887                         set_audio_standard_BTSC(core, 0, EN_BTSC_FORCE_MONO);
 888                         break;
 889                 case V4L2_TUNER_MODE_LANG1:
 890                         set_audio_standard_BTSC(core, 0, EN_BTSC_AUTO_STEREO);
 891                         break;
 892                 case V4L2_TUNER_MODE_LANG2:
 893                         set_audio_standard_BTSC(core, 1, EN_BTSC_FORCE_SAP);
 894                         break;
 895                 case V4L2_TUNER_MODE_STEREO:
 896                 case V4L2_TUNER_MODE_LANG1_LANG2:
 897                         set_audio_standard_BTSC(core, 0, EN_BTSC_FORCE_STEREO);
 898                         break;
 899                 }
 900                 break;
 901         case WW_BG:
 902         case WW_DK:
 903         case WW_I:
 904         case WW_L:
 905                 if (1 == core->use_nicam) {
 906                         switch (mode) {
 907                         case V4L2_TUNER_MODE_MONO:
 908                         case V4L2_TUNER_MODE_LANG1:
 909                                 set_audio_standard_NICAM(core,
 910                                                          EN_NICAM_FORCE_MONO1);
 911                                 break;
 912                         case V4L2_TUNER_MODE_LANG2:
 913                                 set_audio_standard_NICAM(core,
 914                                                          EN_NICAM_FORCE_MONO2);
 915                                 break;
 916                         case V4L2_TUNER_MODE_STEREO:
 917                         case V4L2_TUNER_MODE_LANG1_LANG2:
 918                                 set_audio_standard_NICAM(core,
 919                                                          EN_NICAM_FORCE_STEREO);
 920                                 break;
 921                         }
 922                 } else {
 923                         if ((core->tvaudio == WW_I) || (core->tvaudio == WW_L)) {
 924                                 /* fall back to fm / am mono */
 925                                 set_audio_standard_A2(core, EN_A2_FORCE_MONO1);
 926                         } else {
 927                                 /* TODO: Add A2 autodection */
 928                                 switch (mode) {
 929                                 case V4L2_TUNER_MODE_MONO:
 930                                 case V4L2_TUNER_MODE_LANG1:
 931                                         set_audio_standard_A2(core,
 932                                                               EN_A2_FORCE_MONO1);
 933                                         break;
 934                                 case V4L2_TUNER_MODE_LANG2:
 935                                         set_audio_standard_A2(core,
 936                                                               EN_A2_FORCE_MONO2);
 937                                         break;
 938                                 case V4L2_TUNER_MODE_STEREO:
 939                                 case V4L2_TUNER_MODE_LANG1_LANG2:
 940                                         set_audio_standard_A2(core,
 941                                                               EN_A2_FORCE_STEREO);
 942                                         break;
 943                                 }
 944                         }
 945                 }
 946                 break;
 947         case WW_FM:
 948                 switch (mode) {
 949                 case V4L2_TUNER_MODE_MONO:
 950                         ctl = EN_FMRADIO_FORCE_MONO;
 951                         mask = 0x3f;
 952                         break;
 953                 case V4L2_TUNER_MODE_STEREO:
 954                         ctl = EN_FMRADIO_AUTO_STEREO;
 955                         mask = 0x3f;
 956                         break;
 957                 }
 958                 break;
 959         }
 960
 961         if (UNSET != ctl) {
 962                 dprintk("cx88_set_stereo: mask 0x%x, ctl 0x%x "
 963                         "[status=0x%x,ctl=0x%x,vol=0x%x]\n",
 964                         mask, ctl, cx_read(AUD_STATUS),
 965                         cx_read(AUD_CTL), cx_sread(SHADOW_AUD_VOL_CTL));
 966                 cx_andor(AUD_CTL, mask, ctl);
 967         }
 968         return;
 969 }
 970
 971 int cx88_audio_thread(void *data)
 972 {
 973         struct cx88_core *core = data;
 974         struct v4l2_tuner t;
 975         u32 mode = 0;
 976
 977         dprintk("cx88: tvaudio thread started\n");
 978         for (;;) {
 979                 msleep_interruptible(1000);
 980                 if (kthread_should_stop())
 981                         break;
 982
 983                 /* just monitor the audio status for now ... */
 984                 memset(&t, 0, sizeof(t));
 985                 cx88_get_stereo(core, &t);
 986
 987                 if (UNSET != core->audiomode_manual)
 988                         /* manually set, don't do anything. */
 989                         continue;
 990
 991                 /* monitor signal */
 992                 if (t.rxsubchans & V4L2_TUNER_SUB_STEREO)
 993                         mode = V4L2_TUNER_MODE_STEREO;
 994                 else
 995                         mode = V4L2_TUNER_MODE_MONO;
 996                 if (mode == core->audiomode_current)
 997                         continue;
 998
 999                 /* automatically switch to best available mode */
1000                 cx88_set_stereo(core, mode, 0);
1001         }
1002
1003         dprintk("cx88: tvaudio thread exiting\n");
1004         return 0;
1005 }
1006
1007 /* ----------------------------------------------------------- */
1008
1009 EXPORT_SYMBOL(cx88_set_tvaudio);
1010 EXPORT_SYMBOL(cx88_newstation);
1011 EXPORT_SYMBOL(cx88_set_stereo);
1012 EXPORT_SYMBOL(cx88_get_stereo);
1013 EXPORT_SYMBOL(cx88_audio_thread);
1014
1015 /*
1016  * Local variables:
1017  * c-basic-offset: 8
1018  * End:
1019  * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
1020  */