2 # Generic video config states
7 depends on VIDEO_DEV && VIDEO_V4L2_COMMON
8 default VIDEO_DEV && VIDEO_V4L2_COMMON
12 depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
13 default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
18 config VIDEOBUF_DMA_SG
23 config VIDEOBUF_VMALLOC
27 config VIDEOBUF_DMA_CONTIG
46 depends on MEDIA_TUNER
48 config V4L2_MEM2MEM_DEV
50 depends on VIDEOBUF_GEN
53 # Multimedia Video device configuration
56 menuconfig VIDEO_CAPTURE_DRIVERS
57 bool "Video capture adapters"
61 Say Y here to enable selecting the video adapters for
62 webcams, analog TV, and hybrid analog/digital TV.
63 Some of those devices also supports FM radio.
65 if VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2
67 config VIDEO_ADV_DEBUG
68 bool "Enable advanced debug functionality"
71 Say Y here to enable advanced debugging functionality on some
75 config VIDEO_FIXED_MINOR_RANGES
76 bool "Enable old-style fixed minor ranges for video devices"
79 Say Y here to enable the old-style fixed-range minor assignments.
80 Only useful if you rely on the old behavior and use mknod instead of udev.
84 config VIDEO_HELPER_CHIPS_AUTO
85 bool "Autoselect pertinent encoders/decoders and other helper chips"
88 Most video cards may require additional modules to encode or
89 decode audio/video standards. This option will autoselect
90 all pertinent modules to each selected video module.
92 Unselect this only if you know exactly what you are doing, since
93 it may break support on some boards.
98 tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
99 depends on I2C && VIDEO_IR
102 Most boards have an IR chip directly connected via GPIO. However,
103 some video boards have the IR connected via I2C bus.
105 If your board doesn't have an I2C IR chip, you may disable this
111 # Encoder / Decoder module configuration
114 menu "Encoders/decoders and other helper chips"
115 depends on !VIDEO_HELPER_CHIPS_AUTO
117 comment "Audio decoders"
120 tristate "Simple audio decoder chips"
121 depends on VIDEO_V4L2 && I2C
123 Support for several audio decoder chips found on some bt8xx boards:
124 Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
125 tea6320, tea6420, tda8425, ta8874z.
126 Microchip: pic16c54 based design on ProVideo PV951 board.
128 To compile this driver as a module, choose M here: the
129 module will be called tvaudio.
132 tristate "Philips TDA7432 audio processor"
133 depends on VIDEO_V4L2 && I2C
135 Support for tda7432 audio decoder chip found on some bt8xx boards.
137 To compile this driver as a module, choose M here: the
138 module will be called tda7432.
141 tristate "Philips TDA9840 audio processor"
144 Support for tda9840 audio decoder chip found on some Zoran boards.
146 To compile this driver as a module, choose M here: the
147 module will be called tda9840.
150 tristate "Philips TDA9875 audio processor"
151 depends on VIDEO_V4L2 && I2C
153 Support for tda9875 audio decoder chip found on some bt8xx boards.
155 To compile this driver as a module, choose M here: the
156 module will be called tda9875.
158 config VIDEO_TEA6415C
159 tristate "Philips TEA6415C audio processor"
162 Support for tea6415c audio decoder chip found on some bt8xx boards.
164 To compile this driver as a module, choose M here: the
165 module will be called tea6415c.
168 tristate "Philips TEA6420 audio processor"
171 Support for tea6420 audio decoder chip found on some bt8xx boards.
173 To compile this driver as a module, choose M here: the
174 module will be called tea6420.
177 tristate "Micronas MSP34xx audio decoders"
178 depends on VIDEO_V4L2 && I2C
180 Support for the Micronas MSP34xx series of audio decoders.
182 To compile this driver as a module, choose M here: the
183 module will be called msp3400.
186 tristate "Cirrus Logic CS5345 audio ADC"
187 depends on VIDEO_V4L2 && I2C
189 Support for the Cirrus Logic CS5345 24-bit, 192 kHz
190 stereo A/D converter.
192 To compile this driver as a module, choose M here: the
193 module will be called cs5345.
195 config VIDEO_CS53L32A
196 tristate "Cirrus Logic CS53L32A audio ADC"
197 depends on VIDEO_V4L2 && I2C
199 Support for the Cirrus Logic CS53L32A low voltage
200 stereo A/D converter.
202 To compile this driver as a module, choose M here: the
203 module will be called cs53l32a.
206 tristate "Mitsubishi M52790 A/V switch"
207 depends on VIDEO_V4L2 && I2C
209 Support for the Mitsubishi M52790 A/V switch.
211 To compile this driver as a module, choose M here: the
212 module will be called m52790.
214 config VIDEO_TLV320AIC23B
215 tristate "Texas Instruments TLV320AIC23B audio codec"
216 depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
218 Support for the Texas Instruments TLV320AIC23B audio codec.
220 To compile this driver as a module, choose M here: the
221 module will be called tlv320aic23b.
224 tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
225 depends on VIDEO_V4L2 && I2C
227 Support for the Wolfson Microelectronics WM8775 high
228 performance stereo A/D Converter with a 4 channel input mixer.
230 To compile this driver as a module, choose M here: the
231 module will be called wm8775.
234 tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
235 depends on VIDEO_V4L2 && I2C
237 Support for the Wolfson Microelectronics WM8739
238 stereo A/D Converter.
240 To compile this driver as a module, choose M here: the
241 module will be called wm8739.
243 config VIDEO_VP27SMPX
244 tristate "Panasonic VP27s internal MPX"
245 depends on VIDEO_V4L2 && I2C
247 Support for the internal MPX of the Panasonic VP27s tuner.
249 To compile this driver as a module, choose M here: the
250 module will be called vp27smpx.
252 comment "RDS decoders"
255 tristate "SAA6588 Radio Chip RDS decoder support"
256 depends on VIDEO_V4L2 && I2C
259 Support for this Radio Data System (RDS) decoder. This allows
260 seeing radio station identification transmitted using this
263 To compile this driver as a module, choose M here: the
264 module will be called saa6588.
266 comment "Video decoders"
269 tristate "Analog Devices ADV7180 decoder"
270 depends on VIDEO_V4L2 && I2C
272 Support for the Analog Devices ADV7180 video decoder.
274 To compile this driver as a module, choose M here: the
275 module will be called adv7180.
278 tristate "BT819A VideoStream decoder"
279 depends on VIDEO_V4L2 && I2C
281 Support for BT819A video decoder.
283 To compile this driver as a module, choose M here: the
284 module will be called bt819.
287 tristate "BT856 VideoStream decoder"
288 depends on VIDEO_V4L2 && I2C
290 Support for BT856 video decoder.
292 To compile this driver as a module, choose M here: the
293 module will be called bt856.
296 tristate "BT866 VideoStream decoder"
297 depends on VIDEO_V4L2 && I2C
299 Support for BT866 video decoder.
301 To compile this driver as a module, choose M here: the
302 module will be called bt866.
305 tristate "KS0127 video decoder"
306 depends on VIDEO_V4L2 && I2C
308 Support for KS0127 video decoder.
310 This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
313 To compile this driver as a module, choose M here: the
314 module will be called ks0127.
317 tristate "OmniVision OV7670 sensor support"
318 depends on I2C && VIDEO_V4L2
320 This is a Video4Linux2 sensor-level driver for the OmniVision
321 OV7670 VGA camera. It currently only works with the M88ALP01
325 tristate "Micron mt9v011 sensor support"
326 depends on I2C && VIDEO_V4L2
328 This is a Video4Linux2 sensor-level driver for the Micron
329 mt0v011 1.3 Mpixel camera. It currently only works with the
333 tristate "TCM825x camera sensor support"
334 depends on I2C && VIDEO_V4L2
336 This is a driver for the Toshiba TCM825x VGA camera sensor.
337 It is used for example in Nokia N800.
340 tristate "Philips SAA7110 video decoder"
341 depends on VIDEO_V4L2 && I2C
343 Support for the Philips SAA7110 video decoders.
345 To compile this driver as a module, choose M here: the
346 module will be called saa7110.
349 tristate "Philips SAA7111/3/4/5 video decoders"
350 depends on VIDEO_V4L2 && I2C
352 Support for the Philips SAA7111/3/4/5 video decoders.
354 To compile this driver as a module, choose M here: the
355 module will be called saa7115.
358 tristate "Philips SAA7171/3/4 audio/video decoders"
359 depends on VIDEO_V4L2 && I2C
361 Support for the Philips SAA7171/3/4 audio/video decoders.
363 To compile this driver as a module, choose M here: the
364 module will be called saa717x.
367 tristate "Philips SAA7191 video decoder"
368 depends on VIDEO_V4L2 && I2C
370 Support for the Philips SAA7191 video decoder.
372 To compile this driver as a module, choose M here: the
373 module will be called saa7191.
376 tristate "Texas Instruments TVP514x video decoder"
377 depends on VIDEO_V4L2 && I2C
379 This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
380 decoder. It is currently working with the TI OMAP3 camera
383 To compile this driver as a module, choose M here: the
384 module will be called tvp514x.
387 tristate "Texas Instruments TVP5150 video decoder"
388 depends on VIDEO_V4L2 && I2C
390 Support for the Texas Instruments TVP5150 video decoder.
392 To compile this driver as a module, choose M here: the
393 module will be called tvp5150.
396 tristate "Texas Instruments TVP7002 video decoder"
397 depends on VIDEO_V4L2 && I2C
399 Support for the Texas Instruments TVP7002 video decoder.
401 To compile this driver as a module, choose M here: the
402 module will be called tvp7002.
405 tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
406 depends on VIDEO_V4L2 && I2C
408 Support for VPX322x video decoders.
410 To compile this driver as a module, choose M here: the
411 module will be called vpx3220.
413 comment "Video and audio decoders"
415 source "drivers/media/video/cx25840/Kconfig"
417 comment "MPEG video encoders"
420 tristate "Conexant CX2341x MPEG encoders"
421 depends on VIDEO_V4L2 && VIDEO_V4L2_COMMON
423 Support for the Conexant CX23416 MPEG encoders
424 and CX23415 MPEG encoder/decoders.
426 This module currently supports the encoding functions only.
428 To compile this driver as a module, choose M here: the
429 module will be called cx2341x.
431 comment "Video encoders"
434 tristate "Philips SAA7127/9 digital video encoders"
435 depends on VIDEO_V4L2 && I2C
437 Support for the Philips SAA7127/9 digital video encoders.
439 To compile this driver as a module, choose M here: the
440 module will be called saa7127.
443 tristate "Philips SAA7185 video encoder"
444 depends on VIDEO_V4L2 && I2C
446 Support for the Philips SAA7185 video encoder.
448 To compile this driver as a module, choose M here: the
449 module will be called saa7185.
452 tristate "Analog Devices ADV7170 video encoder"
453 depends on VIDEO_V4L2 && I2C
455 Support for the Analog Devices ADV7170 video encoder driver
457 To compile this driver as a module, choose M here: the
458 module will be called adv7170.
461 tristate "Analog Devices ADV7175 video encoder"
462 depends on VIDEO_V4L2 && I2C
464 Support for the Analog Devices ADV7175 video encoder driver
466 To compile this driver as a module, choose M here: the
467 module will be called adv7175.
470 tristate "THS7303 Video Amplifier"
473 Support for TI THS7303 video amplifier
475 To compile this driver as a module, choose M here: the
476 module will be called ths7303.
479 tristate "ADV7343 video encoder"
482 Support for Analog Devices I2C bus based ADV7343 encoder.
484 To compile this driver as a module, choose M here: the
485 module will be called adv7343.
488 tristate "AK8813/AK8814 video encoders"
491 Video output driver for AKM AK8813 and AK8814 TV encoders
493 comment "Video improvement chips"
495 config VIDEO_UPD64031A
496 tristate "NEC Electronics uPD64031A Ghost Reduction"
497 depends on VIDEO_V4L2 && I2C
499 Support for the NEC Electronics uPD64031A Ghost Reduction
500 video chip. It is most often found in NTSC TV cards made for
501 Japan and is used to reduce the 'ghosting' effect that can
502 be present in analog TV broadcasts.
504 To compile this driver as a module, choose M here: the
505 module will be called upd64031a.
507 config VIDEO_UPD64083
508 tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
509 depends on VIDEO_V4L2 && I2C
511 Support for the NEC Electronics uPD64083 3-Dimensional Y/C
512 separation video chip. It is used to improve the quality of
513 the colors of a composite signal.
515 To compile this driver as a module, choose M here: the
516 module will be called upd64083.
518 endmenu # encoder / decoder chips
520 config DISPLAY_DAVINCI_DM646X_EVM
521 tristate "DM646x EVM Video Display"
522 depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
523 select VIDEOBUF_DMA_CONTIG
524 select VIDEO_DAVINCI_VPIF
528 Support for DM6467 based display device.
530 To compile this driver as a module, choose M here: the
531 module will be called vpif_display.
534 tristate "SuperH VOU video output driver"
535 depends on VIDEO_DEV && ARCH_SHMOBILE
536 select VIDEOBUF_DMA_CONTIG
538 Support for the Video Output Unit (VOU) on SuperH SoCs.
540 config CAPTURE_DAVINCI_DM646X_EVM
541 tristate "DM646x EVM Video Capture"
542 depends on VIDEO_DEV && MACH_DAVINCI_DM6467_EVM
543 select VIDEOBUF_DMA_CONTIG
544 select VIDEO_DAVINCI_VPIF
546 Support for DM6467 based capture device.
548 To compile this driver as a module, choose M here: the
549 module will be called vpif_capture.
551 config VIDEO_DAVINCI_VPIF
552 tristate "DaVinci VPIF Driver"
553 depends on DISPLAY_DAVINCI_DM646X_EVM
555 Support for DaVinci VPIF Driver.
557 To compile this driver as a module, choose M here: the
558 module will be called vpif.
561 tristate "Virtual Video Driver"
562 depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
563 depends on (FRAMEBUFFER_CONSOLE || STI_CONSOLE) && FONTS
565 select VIDEOBUF_VMALLOC
568 Enables a virtual video driver. This device shows a color bar
569 and a timestamp, as a real device would generate by using V4L2
571 Say Y here if you want to test video apps or debug V4L devices.
574 config VIDEO_VPSS_SYSTEM
575 tristate "VPSS System module driver"
576 depends on ARCH_DAVINCI
578 Support for vpss system module for video driver
580 config VIDEO_VPFE_CAPTURE
581 tristate "VPFE Video Capture Driver"
582 depends on VIDEO_V4L2 && ARCH_DAVINCI
583 select VIDEOBUF_DMA_CONTIG
585 Support for DMXXXX VPFE based frame grabber. This is the
586 common V4L2 module for following DMXXX SoCs from Texas
587 Instruments:- DM6446 & DM355.
589 To compile this driver as a module, choose M here: the
590 module will be called vpfe-capture.
592 config VIDEO_DM6446_CCDC
593 tristate "DM6446 CCDC HW module"
594 depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE
595 select VIDEO_VPSS_SYSTEM
598 Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
599 with decoder modules such as TVP5146 over BT656 or
600 sensor module such as MT9T001 over a raw interface. This
601 module configures the interface and CCDC/ISIF to do
602 video frame capture from slave decoders.
604 To compile this driver as a module, choose M here: the
605 module will be called vpfe.
607 config VIDEO_DM355_CCDC
608 tristate "DM355 CCDC HW module"
609 depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE
610 select VIDEO_VPSS_SYSTEM
613 Enables DM355 CCD hw module. DM355 CCDC hw interfaces
614 with decoder modules such as TVP5146 over BT656 or
615 sensor module such as MT9T001 over a raw interface. This
616 module configures the interface and CCDC/ISIF to do
617 video frame capture from a slave decoders
619 To compile this driver as a module, choose M here: the
620 module will be called vpfe.
623 tristate "ISIF HW module"
624 depends on ARCH_DAVINCI_DM365 && VIDEO_VPFE_CAPTURE
625 select VIDEO_VPSS_SYSTEM
628 Enables ISIF hw module. This is the hardware module for
629 configuring ISIF in VPFE to capture Raw Bayer RGB data from
630 a image sensor or YUV data from a YUV source.
632 To compile this driver as a module, choose M here: the
633 module will be called vpfe.
635 source "drivers/media/video/omap/Kconfig"
637 source "drivers/media/video/bt8xx/Kconfig"
640 tristate "Mediavision Pro Movie Studio Video For Linux"
641 depends on ISA && VIDEO_V4L2
643 Say Y if you have such a thing.
645 To compile this driver as a module, choose M here: the
646 module will be called pms.
649 tristate "Quickcam BW Video For Linux"
650 depends on PARPORT && VIDEO_V4L2
652 Say Y have if you the black and white version of the QuickCam
653 camera. See the next option for the color version.
655 To compile this driver as a module, choose M here: the
656 module will be called bw-qcam.
659 tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
660 depends on EXPERIMENTAL && PARPORT && VIDEO_V4L2
662 This is the video4linux driver for the colour version of the
663 Connectix QuickCam. If you have one of these cameras, say Y here,
664 otherwise say N. This driver does not work with the original
665 monochrome QuickCam, QuickCam VC or QuickClip. It is also available
666 as a module (c-qcam).
667 Read <file:Documentation/video4linux/CQcam.txt> for more information.
670 tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
671 depends on PARPORT_1284 && PARPORT && VIDEO_V4L2
673 Video4linux driver for Winbond's w9966 based Webcams.
674 Currently tested with the LifeView FlyCam Supra.
675 If you have one of these cameras, say Y here
677 This driver is also available as a module (w9966).
679 Check out <file:Documentation/video4linux/w9966.txt> for more
683 tristate "CPiA Video For Linux (DEPRECATED)"
684 depends on VIDEO_V4L1
687 This driver is DEPRECATED please use the gspca cpia1 module
688 instead. Note that you need atleast version 0.6.4 of libv4l for
689 the cpia1 gspca module.
691 This is the video4linux driver for cameras based on Vision's CPiA
692 (Colour Processor Interface ASIC), such as the Creative Labs Video
693 Blaster Webcam II. If you have one of these cameras, say Y here
694 and select parallel port and/or USB lowlevel support below,
695 otherwise say N. This will not work with the Creative Webcam III.
697 Please read <file:Documentation/video4linux/README.cpia> for more
700 This driver is also available as a module (cpia).
703 tristate "CPiA Parallel Port Lowlevel Support"
704 depends on PARPORT_1284 && VIDEO_CPIA && PARPORT
706 This is the lowlevel parallel port support for cameras based on
707 Vision's CPiA (Colour Processor Interface ASIC), such as the
708 Creative Webcam II. If you have the parallel port version of one
709 of these cameras, say Y here, otherwise say N. It is also available
710 as a module (cpia_pp).
712 config VIDEO_CPIA_USB
713 tristate "CPiA USB Lowlevel Support"
714 depends on VIDEO_CPIA && USB
716 This is the lowlevel USB support for cameras based on Vision's CPiA
717 (Colour Processor Interface ASIC), such as the Creative Webcam II.
718 If you have the USB version of one of these cameras, say Y here,
719 otherwise say N. This will not work with the Creative Webcam III.
720 It is also available as a module (cpia_usb).
722 source "drivers/media/video/cpia2/Kconfig"
724 config VIDEO_SAA5246A
725 tristate "SAA5246A, SAA5281 Teletext processor"
726 depends on I2C && VIDEO_V4L2
728 Support for I2C bus based teletext using the SAA5246A or SAA5281
729 chip. Useful only if you live in Europe.
731 To compile this driver as a module, choose M here: the
732 module will be called saa5246a.
735 tristate "SAA5249 Teletext processor"
736 depends on I2C && VIDEO_V4L2
738 Support for I2C bus based teletext using the SAA5249 chip. At the
739 moment this is only useful on some European WinTV cards.
741 To compile this driver as a module, choose M here: the
742 module will be called saa5249.
745 tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
746 depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
747 select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
749 Say Y here to build in support for the Vino video input system found
750 on SGI Indy machines.
753 tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
754 depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
756 Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
757 driver for PCI. There is a product page at
758 <http://www.stradis.com/>.
760 source "drivers/media/video/zoran/Kconfig"
763 tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
764 depends on PCI && SONY_LAPTOP && VIDEO_V4L2
766 This is the video4linux driver for the Motion Eye camera found
767 in the Vaio Picturebook laptops. Please read the material in
768 <file:Documentation/video4linux/meye.txt> for more information.
770 If you say Y or M here, you need to say Y or M to "Sony Laptop
771 Extras" in the misc device section.
773 To compile this driver as a module, choose M here: the
774 module will be called meye.
776 source "drivers/media/video/saa7134/Kconfig"
779 tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
780 depends on PCI && VIDEO_V4L2 && I2C
781 select VIDEO_SAA7146_VV
783 select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
784 select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
785 select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
786 select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
788 This is a video4linux driver for the 'Multimedia eXtension Board'
789 TV card by Siemens-Nixdorf.
791 To compile this driver as a module, choose M here: the
792 module will be called mxb.
794 config VIDEO_HEXIUM_ORION
795 tristate "Hexium HV-PCI6 and Orion frame grabber"
796 depends on PCI && VIDEO_V4L2 && I2C
797 select VIDEO_SAA7146_VV
799 This is a video4linux driver for the Hexium HV-PCI6 and
800 Orion frame grabber cards by Hexium.
802 To compile this driver as a module, choose M here: the
803 module will be called hexium_orion.
805 config VIDEO_HEXIUM_GEMINI
806 tristate "Hexium Gemini frame grabber"
807 depends on PCI && VIDEO_V4L2 && I2C
808 select VIDEO_SAA7146_VV
810 This is a video4linux driver for the Hexium Gemini frame
811 grabber card by Hexium. Please note that the Gemini Dual
812 card is *not* fully supported.
814 To compile this driver as a module, choose M here: the
815 module will be called hexium_gemini.
817 source "drivers/media/video/cx88/Kconfig"
819 source "drivers/media/video/cx23885/Kconfig"
821 source "drivers/media/video/au0828/Kconfig"
823 source "drivers/media/video/ivtv/Kconfig"
825 source "drivers/media/video/cx18/Kconfig"
827 source "drivers/media/video/saa7164/Kconfig"
830 tristate "AR devices"
831 depends on M32R && VIDEO_V4L2
833 This is a video4linux driver for the Renesas AR (Artificial Retina)
836 config VIDEO_M32R_AR_M64278
837 tristate "AR device with color module M64278(VGA)"
838 depends on PLAT_M32700UT
841 This is a video4linux driver for the Renesas AR (Artificial
842 Retina) with M64278E-800 camera module.
843 This module supports VGA(640x480 pixels) resolutions.
845 To compile this driver as a module, choose M here: the
846 module will be called arv.
848 config VIDEO_CAFE_CCIC
849 tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
850 depends on PCI && I2C && VIDEO_V4L2
853 This is a video4linux2 driver for the Marvell 88ALP01 integrated
854 CMOS camera controller. This is the controller found on first-
855 generation OLPC systems.
858 tristate "SoC camera support"
859 depends on VIDEO_V4L2 && HAS_DMA && I2C
862 SoC Camera is a common API to several cameras, not connecting
863 over a bus like PCI or USB. For example some i2c camera connected
864 directly to the data bus of an SoC.
866 config SOC_CAMERA_MT9M001
867 tristate "mt9m001 support"
868 depends on SOC_CAMERA && I2C
869 select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
871 This driver supports MT9M001 cameras from Micron, monochrome
874 config SOC_CAMERA_MT9M111
875 tristate "mt9m111 and mt9m112 support"
876 depends on SOC_CAMERA && I2C
878 This driver supports MT9M111 and MT9M112 cameras from Micron
880 config SOC_CAMERA_MT9T031
881 tristate "mt9t031 support"
882 depends on SOC_CAMERA && I2C
884 This driver supports MT9T031 cameras from Micron.
886 config SOC_CAMERA_MT9T112
887 tristate "mt9t112 support"
888 depends on SOC_CAMERA && I2C
890 This driver supports MT9T112 cameras from Aptina.
892 config SOC_CAMERA_MT9V022
893 tristate "mt9v022 support"
894 depends on SOC_CAMERA && I2C
895 select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
897 This driver supports MT9V022 cameras from Micron
899 config SOC_CAMERA_RJ54N1
900 tristate "rj54n1cb0c support"
901 depends on SOC_CAMERA && I2C
903 This is a rj54n1cb0c video driver
905 config SOC_CAMERA_TW9910
906 tristate "tw9910 support"
907 depends on SOC_CAMERA && I2C
909 This is a tw9910 video driver
911 config SOC_CAMERA_PLATFORM
912 tristate "platform camera support"
913 depends on SOC_CAMERA
915 This is a generic SoC camera platform driver, useful for testing
917 config SOC_CAMERA_OV772X
918 tristate "ov772x camera support"
919 depends on SOC_CAMERA && I2C
921 This is a ov772x camera driver
923 config SOC_CAMERA_OV9640
924 tristate "ov9640 camera support"
925 depends on SOC_CAMERA && I2C
927 This is a ov9640 camera driver
933 tristate "i.MX1/i.MXL CMOS Sensor Interface driver"
934 depends on VIDEO_DEV && ARCH_MX1 && SOC_CAMERA
936 select VIDEOBUF_DMA_CONTIG
939 This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
945 tristate "i.MX3x Camera Sensor Interface driver"
946 depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
947 select VIDEOBUF_DMA_CONTIG
950 This is a v4l2 driver for the i.MX3x Camera Sensor Interface
953 tristate "PXA27x Quick Capture Interface driver"
954 depends on VIDEO_DEV && PXA27x && SOC_CAMERA
955 select VIDEOBUF_DMA_SG
957 This is a v4l2 driver for the PXA27x Quick Capture Interface
959 config VIDEO_SH_MOBILE_CEU
960 tristate "SuperH Mobile CEU Interface driver"
961 depends on VIDEO_DEV && SOC_CAMERA && HAS_DMA && HAVE_CLK
962 select VIDEOBUF_DMA_CONTIG
964 This is a v4l2 driver for the SuperH Mobile CEU Interface
967 tristate "OMAP2 Camera Capture Interface driver"
968 depends on VIDEO_DEV && ARCH_OMAP2
969 select VIDEOBUF_DMA_SG
971 This is a v4l2 driver for the TI OMAP2 camera capture interface
974 # USB Multimedia device configuration
977 menuconfig V4L_USB_DRIVERS
978 bool "V4L USB devices"
982 if V4L_USB_DRIVERS && USB
984 source "drivers/media/video/uvc/Kconfig"
986 source "drivers/media/video/gspca/Kconfig"
988 source "drivers/media/video/pvrusb2/Kconfig"
990 source "drivers/media/video/hdpvr/Kconfig"
992 source "drivers/media/video/em28xx/Kconfig"
994 source "drivers/media/video/tlg2300/Kconfig"
996 source "drivers/media/video/cx231xx/Kconfig"
998 source "drivers/media/video/usbvision/Kconfig"
1000 source "drivers/media/video/usbvideo/Kconfig"
1002 source "drivers/media/video/et61x251/Kconfig"
1005 tristate "USB SE401 Camera support"
1006 depends on VIDEO_V4L1
1008 Say Y here if you want to connect this type of camera to your
1009 computer's USB port. See <file:Documentation/video4linux/se401.txt>
1010 for more information and for a list of supported cameras.
1012 To compile this driver as a module, choose M here: the
1013 module will be called se401.
1015 source "drivers/media/video/sn9c102/Kconfig"
1017 source "drivers/media/video/pwc/Kconfig"
1020 tristate "USB ZR364XX Camera support"
1021 depends on VIDEO_V4L2
1023 select VIDEOBUF_VMALLOC
1025 Say Y here if you want to connect this type of camera to your
1026 computer's USB port.
1027 See <file:Documentation/video4linux/zr364xx.txt> for more info
1028 and list of supported cameras.
1030 To compile this driver as a module, choose M here: the
1031 module will be called zr364xx.
1033 config USB_STKWEBCAM
1034 tristate "USB Syntek DC1125 Camera support"
1035 depends on VIDEO_V4L2 && EXPERIMENTAL
1037 Say Y here if you want to use this type of camera.
1038 Supported devices are typically found in some Asus laptops,
1039 with USB id 174f:a311 and 05e1:0501. Other Syntek cameras
1040 may be supported by the stk11xx driver, from which this is
1041 derived, see http://stk11xx.sourceforge.net
1043 To compile this driver as a module, choose M here: the
1044 module will be called stkwebcam.
1047 tristate "USB Sensoray 2255 video capture device"
1048 depends on VIDEO_V4L2
1049 select VIDEOBUF_VMALLOC
1052 Say Y here if you want support for the Sensoray 2255 USB device.
1053 This driver can be compiled as a module, called s2255drv.
1055 endif # V4L_USB_DRIVERS
1056 endif # VIDEO_CAPTURE_DRIVERS
1058 menuconfig V4L_MEM2MEM_DRIVERS
1059 bool "Memory-to-memory multimedia devices"
1060 depends on VIDEO_V4L2
1063 Say Y here to enable selecting drivers for V4L devices that
1064 use system memory for both source and destination buffers, as opposed
1065 to capture and output drivers, which use memory buffers for just
1068 if V4L_MEM2MEM_DRIVERS
1070 config VIDEO_MEM2MEM_TESTDEV
1071 tristate "Virtual test device for mem2mem framework"
1072 depends on VIDEO_DEV && VIDEO_V4L2
1073 select VIDEOBUF_VMALLOC
1074 select V4L2_MEM2MEM_DEV
1077 This is a virtual test device for the memory-to-memory driver
1080 endif # V4L_MEM2MEM_DRIVERS