1 /* Linux driver for devices based on the DiBcom DiB0700 USB bridge
3 * This program is free software; you can redistribute it and/or modify it
4 * under the terms of the GNU General Public License as published by the Free
5 * Software Foundation, version 2.
7 * Copyright (C) 2005-9 DiBcom, SA et al
11 #include "dib3000mc.h"
17 #include "tuner-xc2028.h"
25 static int force_lna_activation;
26 module_param(force_lna_activation, int, 0644);
27 MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), "
28 "if applicable for the device (default: 0=automatic/off).");
30 struct dib0700_adapter_state {
31 int (*set_param_save) (struct dvb_frontend *, struct dvb_frontend_parameters *);
34 /* Hauppauge Nova-T 500 (aka Bristol)
35 * has a LNA on GPIO0 which is enabled by setting 1 */
36 static struct mt2060_config bristol_mt2060_config[2] = {
46 static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = {
47 .band_caps = BAND_VHF | BAND_UHF,
48 .setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0),
68 static struct dib3000mc_config bristol_dib3000mc_config[2] = {
69 { .agc = &bristol_dib3000p_mt2060_agc_config,
71 .ln_adc_level = 0x1cc7,
72 .output_mpeg2_in_188_bytes = 1,
74 { .agc = &bristol_dib3000p_mt2060_agc_config,
76 .ln_adc_level = 0x1cc7,
77 .output_mpeg2_in_188_bytes = 1,
81 static int bristol_frontend_attach(struct dvb_usb_adapter *adap)
83 struct dib0700_state *st = adap->dev->priv;
85 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
86 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
87 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
88 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
90 if (force_lna_activation)
91 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
93 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
95 if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) {
96 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
100 st->mt2060_if1[adap->id] = 1220;
101 return (adap->fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap,
102 (10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0;
105 static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval)
107 struct i2c_msg msg[2] = {
108 { .addr = 0x50, .flags = 0, .buf = &adrs, .len = 1 },
109 { .addr = 0x50, .flags = I2C_M_RD, .buf = pval, .len = 1 },
111 if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO;
115 static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
117 struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
118 struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1);
121 if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
122 adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) {
123 if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a;
125 return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id],
126 if1) == NULL ? -ENODEV : 0;
129 /* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */
132 static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = {
136 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
137 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
138 (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
139 | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
174 BAND_VHF | BAND_LBAND,
176 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1,
177 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
178 (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8)
179 | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
216 static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = {
220 (3 << 14) | (1 << 12) | (524 << 0),
225 static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = {
226 { .output_mpeg2_in_188_bytes = 1,
227 .hostbus_diversity = 1,
228 .tuner_is_baseband = 1,
230 .agc_config_count = 2,
231 .agc = stk7700d_7000p_mt2266_agc_config,
232 .bw = &stk7700d_mt2266_pll_config,
234 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
235 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
236 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
238 { .output_mpeg2_in_188_bytes = 1,
239 .hostbus_diversity = 1,
240 .tuner_is_baseband = 1,
242 .agc_config_count = 2,
243 .agc = stk7700d_7000p_mt2266_agc_config,
244 .bw = &stk7700d_mt2266_pll_config,
246 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
247 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
248 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
252 static struct mt2266_config stk7700d_mt2266_config[2] = {
253 { .i2c_address = 0x60
255 { .i2c_address = 0x60
259 static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap)
262 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
264 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
265 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
266 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
267 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
269 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
271 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
272 stk7700d_dib7000p_mt2266_config)
274 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__);
279 adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,0x80+(adap->id << 1),
280 &stk7700d_dib7000p_mt2266_config[adap->id]);
282 return adap->fe == NULL ? -ENODEV : 0;
285 static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap)
288 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
290 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
291 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
292 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
293 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
295 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
297 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
298 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
299 stk7700d_dib7000p_mt2266_config)
301 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", __func__);
306 adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap,0x80+(adap->id << 1),
307 &stk7700d_dib7000p_mt2266_config[adap->id]);
309 return adap->fe == NULL ? -ENODEV : 0;
312 static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap)
314 struct i2c_adapter *tun_i2c;
315 tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
316 return dvb_attach(mt2266_attach, adap->fe, tun_i2c,
317 &stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0;
320 /* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */
321 static struct dibx000_agc_config xc3028_agc_config = {
322 BAND_VHF | BAND_UHF, /* band_caps */
324 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0,
325 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
326 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
327 (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) |
328 (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */
331 21, /* time_stabiliz */
343 39718, /* agc2_max */
352 29, /* agc2_slope1 */
353 29, /* agc2_slope2 */
360 1, /* perform_agc_softsplit */
363 /* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */
364 static struct dibx000_bandwidth_config xc3028_bw_config = {
365 60000, 30000, /* internal, sampling */
366 1, 8, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass */
367 0, 0, 1, 1, 0, /* misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc,
369 (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */
370 (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */
372 30000000, /* xtal_hz */
375 static struct dib7000p_config stk7700ph_dib7700_xc3028_config = {
376 .output_mpeg2_in_188_bytes = 1,
377 .tuner_is_baseband = 1,
379 .agc_config_count = 1,
380 .agc = &xc3028_agc_config,
381 .bw = &xc3028_bw_config,
383 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
384 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
385 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
388 static int stk7700ph_xc3028_callback(void *ptr, int component,
389 int command, int arg)
391 struct dvb_usb_adapter *adap = ptr;
394 case XC2028_TUNER_RESET:
395 /* Send the tuner in then out of reset */
396 dib7000p_set_gpio(adap->fe, 8, 0, 0); msleep(10);
397 dib7000p_set_gpio(adap->fe, 8, 0, 1);
399 case XC2028_RESET_CLK:
402 err("%s: unknown command %d, arg %d\n", __func__,
409 static struct xc2028_ctrl stk7700ph_xc3028_ctrl = {
410 .fname = XC2028_DEFAULT_FIRMWARE,
412 .demod = XC3028_FE_DIBCOM52,
415 static struct xc2028_config stk7700ph_xc3028_config = {
417 .ctrl = &stk7700ph_xc3028_ctrl,
420 static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap)
422 struct usb_device_descriptor *desc = &adap->dev->udev->descriptor;
424 if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
425 desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX))
426 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
428 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
430 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
431 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
432 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
433 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
435 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
437 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
440 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
441 &stk7700ph_dib7700_xc3028_config) != 0) {
442 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
447 adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
448 &stk7700ph_dib7700_xc3028_config);
450 return adap->fe == NULL ? -ENODEV : 0;
453 static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap)
455 struct i2c_adapter *tun_i2c;
457 tun_i2c = dib7000p_get_i2c_master(adap->fe,
458 DIBX000_I2C_INTERFACE_TUNER, 1);
460 stk7700ph_xc3028_config.i2c_adap = tun_i2c;
462 /* FIXME: generalize & move to common area */
463 adap->fe->callback = stk7700ph_xc3028_callback;
465 return dvb_attach(xc2028_attach, adap->fe, &stk7700ph_xc3028_config)
466 == NULL ? -ENODEV : 0;
469 #define DEFAULT_RC_INTERVAL 50
471 static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
473 /* Number of keypresses to ignore before start repeating */
474 #define RC_REPEAT_DELAY 6
477 * This function is used only when firmware is < 1.20 version. Newer
478 * firmwares use bulk mode, with functions implemented at dib0700_core,
479 * at dib0700_rc_urb_completion()
481 static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
487 struct dib0700_state *st = d->priv;
489 if (st->fw_version >= 0x10200) {
490 /* For 1.20 firmware , We need to keep the RC polling
491 callback so we can reuse the input device setup in
492 dvb-usb-remote.c. However, the actual work is being done
493 in the bulk URB completion handler. */
497 i = dib0700_ctrl_rd(d, rc_request, 2, key, 4);
499 err("RC Query Failed");
503 /* losing half of KEY_0 events from Philipps rc5 remotes.. */
504 if (key[0] == 0 && key[1] == 0 && key[2] == 0 && key[3] == 0)
507 /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]); */
509 dib0700_rc_setup(d); /* reset ir sensor data to prevent false events */
512 switch (d->props.rc.core.protocol) {
514 /* NEC protocol sends repeat code as 0 0 0 FF */
515 if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
517 keycode = d->last_event;
519 keycode = key[3-2] << 8 | key[3-3];
520 d->last_event = keycode;
523 ir_keydown(d->rc_input_dev, keycode, 0);
526 /* RC-5 protocol changes toggle bit on new keypress */
527 keycode = key[3-2] << 8 | key[3-3];
529 ir_keydown(d->rc_input_dev, keycode, toggle);
536 /* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
537 static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
540 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
541 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
542 (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
543 | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
583 static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = {
586 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
587 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
588 (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
589 | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0),
629 static struct dibx000_bandwidth_config stk7700p_pll_config = {
633 (3 << 14) | (1 << 12) | (524 << 0),
639 static struct dib7000m_config stk7700p_dib7000m_config = {
641 .output_mpeg2_in_188_bytes = 1,
644 .agc_config_count = 1,
645 .agc = &stk7700p_7000m_mt2060_agc_config,
646 .bw = &stk7700p_pll_config,
648 .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
649 .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
650 .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
653 static struct dib7000p_config stk7700p_dib7000p_config = {
654 .output_mpeg2_in_188_bytes = 1,
656 .agc_config_count = 1,
657 .agc = &stk7700p_7000p_mt2060_agc_config,
658 .bw = &stk7700p_pll_config,
660 .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
661 .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
662 .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
665 static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap)
667 struct dib0700_state *st = adap->dev->priv;
668 /* unless there is no real power management in DVB - we leave the device on GPIO6 */
670 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
671 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50);
673 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
674 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
676 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
677 dib0700_ctrl_clock(adap->dev, 72, 1);
678 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100);
680 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
682 st->mt2060_if1[0] = 1220;
684 if (dib7000pc_detection(&adap->dev->i2c_adap)) {
685 adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
686 st->is_dib7000pc = 1;
688 adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
690 return adap->fe == NULL ? -ENODEV : 0;
693 static struct mt2060_config stk7700p_mt2060_config = {
697 static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
699 struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap;
700 struct dib0700_state *st = adap->dev->priv;
701 struct i2c_adapter *tun_i2c;
704 if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
705 adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) {
706 if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a;
708 if (st->is_dib7000pc)
709 tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
711 tun_i2c = dib7000m_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
713 return dvb_attach(mt2060_attach, adap->fe, tun_i2c, &stk7700p_mt2060_config,
714 if1) == NULL ? -ENODEV : 0;
717 /* DIB7070 generic */
718 static struct dibx000_agc_config dib7070_agc_config = {
719 BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
720 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
721 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
722 (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
723 | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
760 static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
762 deb_info("reset: %d", onoff);
763 return dib7000p_set_gpio(fe, 8, 0, !onoff);
766 static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
768 deb_info("sleep: %d", onoff);
769 return dib7000p_set_gpio(fe, 9, 0, onoff);
772 static struct dib0070_config dib7070p_dib0070_config[2] = {
774 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
775 .reset = dib7070_tuner_reset,
776 .sleep = dib7070_tuner_sleep,
778 .clock_pad_drive = 4,
781 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
782 .reset = dib7070_tuner_reset,
783 .sleep = dib7070_tuner_sleep,
789 static struct dib0070_config dib7770p_dib0070_config = {
790 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
791 .reset = dib7070_tuner_reset,
792 .sleep = dib7070_tuner_sleep,
794 .clock_pad_drive = 0,
799 static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
801 struct dvb_usb_adapter *adap = fe->dvb->priv;
802 struct dib0700_adapter_state *state = adap->priv;
805 u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
807 case BAND_VHF: offset = 950; break;
809 default: offset = 550; break;
811 deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
812 dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
813 return state->set_param_save(fe, fep);
816 static int dib7770_set_param_override(struct dvb_frontend *fe,
817 struct dvb_frontend_parameters *fep)
819 struct dvb_usb_adapter *adap = fe->dvb->priv;
820 struct dib0700_adapter_state *state = adap->priv;
823 u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
826 dib7000p_set_gpio(fe, 0, 0, 1);
831 dib7000p_set_gpio(fe, 0, 0, 0);
835 deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
836 dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
837 return state->set_param_save(fe, fep);
840 static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap)
842 struct dib0700_adapter_state *st = adap->priv;
843 struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe,
844 DIBX000_I2C_INTERFACE_TUNER, 1);
846 if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
847 &dib7770p_dib0070_config) == NULL)
850 st->set_param_save = adap->fe->ops.tuner_ops.set_params;
851 adap->fe->ops.tuner_ops.set_params = dib7770_set_param_override;
855 static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
857 struct dib0700_adapter_state *st = adap->priv;
858 struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
861 if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL)
864 if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL)
868 st->set_param_save = adap->fe->ops.tuner_ops.set_params;
869 adap->fe->ops.tuner_ops.set_params = dib7070_set_param_override;
873 static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
875 return dib7000p_pid_filter(adapter->fe, index, pid, onoff);
878 static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff)
880 return dib7000p_pid_filter_ctrl(adapter->fe, onoff);
883 static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
887 (3 << 14) | (1 << 12) | (524 << 0),
893 static struct dib7000p_config dib7070p_dib7000p_config = {
894 .output_mpeg2_in_188_bytes = 1,
896 .agc_config_count = 1,
897 .agc = &dib7070_agc_config,
898 .bw = &dib7070_bw_config_12_mhz,
899 .tuner_is_baseband = 1,
902 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
903 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
904 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
906 .hostbus_diversity = 1,
910 static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
912 struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
913 if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
914 p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
915 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
917 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
919 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
920 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
921 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
922 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
924 dib0700_ctrl_clock(adap->dev, 72, 1);
927 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
929 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
931 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
932 &dib7070p_dib7000p_config) != 0) {
933 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
938 adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
939 &dib7070p_dib7000p_config);
940 return adap->fe == NULL ? -ENODEV : 0;
944 static struct dib7000p_config dib7770p_dib7000p_config = {
945 .output_mpeg2_in_188_bytes = 1,
947 .agc_config_count = 1,
948 .agc = &dib7070_agc_config,
949 .bw = &dib7070_bw_config_12_mhz,
950 .tuner_is_baseband = 1,
953 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
954 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
955 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
957 .hostbus_diversity = 1,
958 .enable_current_mirror = 1,
959 .disable_sample_and_hold = 0,
962 static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap)
964 struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
965 if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
966 p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
967 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
969 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
971 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
972 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
973 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
974 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
976 dib0700_ctrl_clock(adap->dev, 72, 1);
979 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
981 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
983 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
984 &dib7770p_dib7000p_config) != 0) {
985 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
990 adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80,
991 &dib7770p_dib7000p_config);
992 return adap->fe == NULL ? -ENODEV : 0;
995 /* DIB807x generic */
996 static struct dibx000_agc_config dib807x_agc_config[2] = {
999 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
1000 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
1001 * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0,
1002 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
1004 (0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) |
1005 (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
1006 (0 << 0), /* setup*/
1009 10, /* time_stabiliz*/
1019 65535, /* agc1_max*/
1022 65535, /* agc2_max*/
1028 206, /* agc1_slope1*/
1029 255, /* agc1_slope2*/
1032 88, /* agc2_slope1*/
1033 90, /* agc2_slope2*/
1040 0, /* perform_agc_softsplit*/
1043 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
1044 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
1045 * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1046 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
1048 (0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) |
1049 (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
1050 (0 << 0), /* setup */
1053 10, /* time_stabiliz*/
1063 65535, /* agc1_max*/
1066 65535, /* agc2_max*/
1072 206, /* agc1_slope1*/
1073 255, /* agc1_slope2*/
1076 88, /* agc2_slope1*/
1077 90, /* agc2_slope2*/
1084 0, /* perform_agc_softsplit*/
1088 static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = {
1089 60000, 15000, /* internal, sampling*/
1090 1, 20, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass*/
1091 0, 0, 1, 1, 2, /* misc: refdiv, bypclk_div, IO_CLK_en_core,
1093 (3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/
1094 (0 << 25) | 0, /* ifreq = 0.000000 MHz*/
1096 12000000, /* xtal_hz*/
1099 static struct dib8000_config dib807x_dib8000_config[2] = {
1101 .output_mpeg2_in_188_bytes = 1,
1103 .agc_config_count = 2,
1104 .agc = dib807x_agc_config,
1105 .pll = &dib807x_bw_config_12_mhz,
1106 .tuner_is_baseband = 1,
1108 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1109 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1110 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1112 .hostbus_diversity = 1,
1114 .agc_control = &dib0070_ctrl_agc_filter,
1115 .output_mode = OUTMODE_MPEG2_FIFO,
1118 .output_mpeg2_in_188_bytes = 1,
1120 .agc_config_count = 2,
1121 .agc = dib807x_agc_config,
1122 .pll = &dib807x_bw_config_12_mhz,
1123 .tuner_is_baseband = 1,
1125 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1126 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1127 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1129 .hostbus_diversity = 1,
1130 .agc_control = &dib0070_ctrl_agc_filter,
1131 .output_mode = OUTMODE_MPEG2_FIFO,
1136 static int dib80xx_tuner_reset(struct dvb_frontend *fe, int onoff)
1138 return dib8000_set_gpio(fe, 5, 0, !onoff);
1141 static int dib80xx_tuner_sleep(struct dvb_frontend *fe, int onoff)
1143 return dib8000_set_gpio(fe, 0, 0, onoff);
1146 static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = {
1151 static struct dib0070_config dib807x_dib0070_config[2] = {
1153 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
1154 .reset = dib80xx_tuner_reset,
1155 .sleep = dib80xx_tuner_sleep,
1157 .clock_pad_drive = 4,
1159 .force_crystal_mode = 1,
1160 .enable_third_order_filter = 1,
1162 .wbd_gain = dib8070_wbd_gain_cfg,
1163 .osc_buffer_state = 0,
1164 .freq_offset_khz_uhf = -100,
1165 .freq_offset_khz_vhf = -100,
1167 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
1168 .reset = dib80xx_tuner_reset,
1169 .sleep = dib80xx_tuner_sleep,
1171 .clock_pad_drive = 2,
1173 .force_crystal_mode = 1,
1174 .enable_third_order_filter = 1,
1176 .wbd_gain = dib8070_wbd_gain_cfg,
1177 .osc_buffer_state = 0,
1178 .freq_offset_khz_uhf = -25,
1179 .freq_offset_khz_vhf = -25,
1183 static int dib807x_set_param_override(struct dvb_frontend *fe,
1184 struct dvb_frontend_parameters *fep)
1186 struct dvb_usb_adapter *adap = fe->dvb->priv;
1187 struct dib0700_adapter_state *state = adap->priv;
1189 u16 offset = dib0070_wbd_offset(fe);
1190 u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
1195 case BAND_UHF: /* fall-thru wanted */
1197 offset += 250; break;
1199 deb_info("WBD for DiB8000: %d\n", offset);
1200 dib8000_set_wbd_ref(fe, offset);
1202 return state->set_param_save(fe, fep);
1205 static int dib807x_tuner_attach(struct dvb_usb_adapter *adap)
1207 struct dib0700_adapter_state *st = adap->priv;
1208 struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe,
1209 DIBX000_I2C_INTERFACE_TUNER, 1);
1211 if (adap->id == 0) {
1212 if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
1213 &dib807x_dib0070_config[0]) == NULL)
1216 if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
1217 &dib807x_dib0070_config[1]) == NULL)
1221 st->set_param_save = adap->fe->ops.tuner_ops.set_params;
1222 adap->fe->ops.tuner_ops.set_params = dib807x_set_param_override;
1226 static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index,
1229 return dib8000_pid_filter(adapter->fe, index, pid, onoff);
1232 static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter,
1235 return dib8000_pid_filter_ctrl(adapter->fe, onoff);
1239 static int stk807x_frontend_attach(struct dvb_usb_adapter *adap)
1241 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1243 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1244 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1245 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1247 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1249 dib0700_ctrl_clock(adap->dev, 72, 1);
1252 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1254 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1256 dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
1259 adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
1260 &dib807x_dib8000_config[0]);
1262 return adap->fe == NULL ? -ENODEV : 0;
1266 static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap)
1268 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
1270 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1272 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1273 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1274 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1276 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1278 dib0700_ctrl_clock(adap->dev, 72, 1);
1281 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1283 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1285 /* initialize IC 0 */
1286 dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80);
1288 adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
1289 &dib807x_dib8000_config[0]);
1291 return adap->fe == NULL ? -ENODEV : 0;
1294 static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap)
1296 /* initialize IC 1 */
1297 dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82);
1299 adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82,
1300 &dib807x_dib8000_config[1]);
1302 return adap->fe == NULL ? -ENODEV : 0;
1306 struct dibx000_agc_config dib8090_agc_config[2] = {
1308 BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
1309 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
1310 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1311 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
1312 (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
1313 | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
1351 /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1,
1352 * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
1353 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
1354 (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8)
1355 | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0),
1393 static struct dibx000_bandwidth_config dib8090_pll_config_12mhz = {
1397 (3 << 14) | (1 << 12) | (599 << 0),
1403 static int dib8090_get_adc_power(struct dvb_frontend *fe)
1405 return dib8000_get_adc_power(fe, 1);
1408 static struct dib8000_config dib809x_dib8000_config = {
1409 .output_mpeg2_in_188_bytes = 1,
1411 .agc_config_count = 2,
1412 .agc = dib8090_agc_config,
1413 .agc_control = dib0090_dcc_freq,
1414 .pll = &dib8090_pll_config_12mhz,
1415 .tuner_is_baseband = 1,
1417 .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
1418 .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
1419 .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
1421 .hostbus_diversity = 1,
1423 .output_mode = OUTMODE_MPEG2_FIFO,
1425 .diversity_delay = 144,
1429 static struct dib0090_config dib809x_dib0090_config = {
1433 .io.pll_loopdiv = 20,
1434 .io.adc_clock_ratio = 8,
1435 .io.pll_int_loop_filt = 0,
1436 .io.clock_khz = 12000,
1437 .reset = dib80xx_tuner_reset,
1438 .sleep = dib80xx_tuner_sleep,
1441 .i2c_address = DEFAULT_DIB0090_I2C_ADDRESS,
1442 .wbd_vhf_offset = 100,
1443 .wbd_cband_offset = 450,
1446 .get_adc_power = dib8090_get_adc_power,
1447 .freq_offset_khz_uhf = 0,
1448 .freq_offset_khz_vhf = -143,
1451 static int dib8096_set_param_override(struct dvb_frontend *fe,
1452 struct dvb_frontend_parameters *fep)
1454 struct dvb_usb_adapter *adap = fe->dvb->priv;
1455 struct dib0700_adapter_state *state = adap->priv;
1456 u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
1459 enum frontend_tune_state tune_state = CT_SHUTDOWN;
1460 u16 ltgain, rf_gain_limit;
1462 ret = state->set_param_save(fe, fep);
1477 offset += (dib0090_get_wbd_offset(fe) * 8 * 18 / 33 + 1) / 2;
1478 dib8000_set_wbd_ref(fe, offset);
1481 if (band == BAND_CBAND) {
1482 deb_info("tuning in CBAND - soft-AGC startup\n");
1483 /* TODO specific wbd target for dib0090 - needed for startup ? */
1484 dib0090_set_tune_state(fe, CT_AGC_START);
1486 ret = dib0090_gain_control(fe);
1488 tune_state = dib0090_get_tune_state(fe);
1489 if (tune_state == CT_AGC_STEP_0)
1490 dib8000_set_gpio(fe, 6, 0, 1);
1491 else if (tune_state == CT_AGC_STEP_1) {
1492 dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, <gain);
1493 if (rf_gain_limit == 0)
1494 dib8000_set_gpio(fe, 6, 0, 0);
1496 } while (tune_state < CT_AGC_STOP);
1497 dib0090_pwm_gain_reset(fe);
1498 dib8000_pwm_agc_reset(fe);
1499 dib8000_set_tune_state(fe, CT_DEMOD_START);
1501 deb_info("not tuning in CBAND - standard AGC startup\n");
1502 dib0090_pwm_gain_reset(fe);
1508 static int dib809x_tuner_attach(struct dvb_usb_adapter *adap)
1510 struct dib0700_adapter_state *st = adap->priv;
1511 struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
1513 if (dvb_attach(dib0090_register, adap->fe, tun_i2c, &dib809x_dib0090_config) == NULL)
1516 st->set_param_save = adap->fe->ops.tuner_ops.set_params;
1517 adap->fe->ops.tuner_ops.set_params = dib8096_set_param_override;
1521 static int stk809x_frontend_attach(struct dvb_usb_adapter *adap)
1523 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1525 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1526 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1527 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1529 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1531 dib0700_ctrl_clock(adap->dev, 72, 1);
1534 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1536 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1538 dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80);
1540 adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config);
1542 return adap->fe == NULL ? -ENODEV : 0;
1546 static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
1548 .output_mpeg2_in_188_bytes = 1,
1550 .agc_config_count = 1,
1551 .agc = &dib7070_agc_config,
1552 .bw = &dib7070_bw_config_12_mhz,
1553 .tuner_is_baseband = 1,
1556 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
1557 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
1558 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
1560 .hostbus_diversity = 1,
1562 .output_mpeg2_in_188_bytes = 1,
1564 .agc_config_count = 1,
1565 .agc = &dib7070_agc_config,
1566 .bw = &dib7070_bw_config_12_mhz,
1567 .tuner_is_baseband = 1,
1570 .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
1571 .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
1572 .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
1574 .hostbus_diversity = 1,
1578 static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap)
1580 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1582 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1583 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1584 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1585 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1587 dib0700_ctrl_clock(adap->dev, 72, 1);
1590 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1592 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1594 if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18,
1595 stk7070pd_dib7000p_config) != 0) {
1596 err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n",
1601 adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]);
1602 return adap->fe == NULL ? -ENODEV : 0;
1605 static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap)
1607 adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]);
1608 return adap->fe == NULL ? -ENODEV : 0;
1612 static struct s5h1411_config pinnacle_801e_config = {
1613 .output_mode = S5H1411_PARALLEL_OUTPUT,
1614 .gpio = S5H1411_GPIO_OFF,
1615 .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINOUS_NONINVERTING_CLOCK,
1616 .qam_if = S5H1411_IF_44000,
1617 .vsb_if = S5H1411_IF_44000,
1618 .inversion = S5H1411_INVERSION_OFF,
1619 .status_mode = S5H1411_DEMODLOCKING
1622 /* Pinnacle PCTV HD Pro 801e GPIOs map:
1623 GPIO0 - currently unknown
1624 GPIO1 - xc5000 tuner reset
1625 GPIO2 - CX25843 sleep
1626 GPIO3 - currently unknown
1627 GPIO4 - currently unknown
1628 GPIO6 - currently unknown
1629 GPIO7 - currently unknown
1630 GPIO9 - currently unknown
1631 GPIO10 - CX25843 reset
1633 static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap)
1635 struct dib0700_state *st = adap->dev->priv;
1637 /* Make use of the new i2c functions from FW 1.20 */
1638 st->fw_use_new_i2c_api = 1;
1640 /* The s5h1411 requires the dib0700 to not be in master mode */
1641 st->disable_streaming_master_mode = 1;
1643 /* All msleep values taken from Windows USB trace */
1644 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0);
1645 dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0);
1646 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1648 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1650 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1652 dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
1653 dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
1654 dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
1655 dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
1656 dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0);
1659 /* Put the CX25843 to sleep for now since we're in digital mode */
1660 dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1);
1662 /* GPIOs are initialized, do the attach */
1663 adap->fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config,
1664 &adap->dev->i2c_adap);
1665 return adap->fe == NULL ? -ENODEV : 0;
1668 static int dib0700_xc5000_tuner_callback(void *priv, int component,
1669 int command, int arg)
1671 struct dvb_usb_adapter *adap = priv;
1673 if (command == XC5000_TUNER_RESET) {
1674 /* Reset the tuner */
1675 dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0);
1677 dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1);
1680 err("xc5000: unknown tuner callback command: %d\n", command);
1687 static struct xc5000_config s5h1411_xc5000_tunerconfig = {
1688 .i2c_address = 0x64,
1692 static int xc5000_tuner_attach(struct dvb_usb_adapter *adap)
1694 /* FIXME: generalize & move to common area */
1695 adap->fe->callback = dib0700_xc5000_tuner_callback;
1697 return dvb_attach(xc5000_attach, adap->fe, &adap->dev->i2c_adap,
1698 &s5h1411_xc5000_tunerconfig)
1699 == NULL ? -ENODEV : 0;
1702 static struct lgdt3305_config hcw_lgdt3305_config = {
1704 .mpeg_mode = LGDT3305_MPEG_PARALLEL,
1705 .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE,
1706 .tpvalid_polarity = LGDT3305_TP_VALID_LOW,
1708 .spectral_inversion = 1,
1711 .usref_8vsb = 0x0500,
1714 static struct mxl5007t_config hcw_mxl5007t_config = {
1715 .xtal_freq_hz = MxL_XTAL_25_MHZ,
1716 .if_freq_hz = MxL_IF_6_MHZ,
1721 GPIO0 - LNA_CTR (H: LNA power enabled, L: LNA power disabled)
1722 GPIO1 - ANT_SEL (H: VPA, L: MCX)
1728 MXL is behind LG's i2c repeater. LG is on SCL2/SDA2 gpios on the DIB
1730 static int lgdt3305_frontend_attach(struct dvb_usb_adapter *adap)
1732 struct dib0700_state *st = adap->dev->priv;
1734 /* Make use of the new i2c functions from FW 1.20 */
1735 st->fw_use_new_i2c_api = 1;
1737 st->disable_streaming_master_mode = 1;
1739 /* fe power enable */
1740 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
1742 dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
1746 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1748 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
1750 dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
1753 adap->fe = dvb_attach(lgdt3305_attach,
1754 &hcw_lgdt3305_config,
1755 &adap->dev->i2c_adap);
1757 return adap->fe == NULL ? -ENODEV : 0;
1760 static int mxl5007t_tuner_attach(struct dvb_usb_adapter *adap)
1762 return dvb_attach(mxl5007t_attach, adap->fe,
1763 &adap->dev->i2c_adap, 0x60,
1764 &hcw_mxl5007t_config) == NULL ? -ENODEV : 0;
1768 /* DVB-USB and USB stuff follows */
1769 struct usb_device_id dib0700_usb_id_table[] = {
1770 /* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) },
1771 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) },
1772 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) },
1773 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
1774 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
1775 /* 5 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
1776 { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) },
1777 { USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) },
1778 { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) },
1779 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) },
1780 /* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
1781 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV2000E) },
1782 { USB_DEVICE(USB_VID_TERRATEC,
1783 USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) },
1784 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) },
1785 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700D) },
1786 /* 15 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070P) },
1787 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DVB_T_FLASH) },
1788 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070PD) },
1789 { USB_DEVICE(USB_VID_PINNACLE,
1790 USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) },
1791 { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500_PC) },
1792 /* 20 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_EXPRESS) },
1793 { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U7000) },
1794 { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14BR) },
1795 { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000) },
1796 { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100) },
1797 /* 25 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_3) },
1798 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_MYTV_T) },
1799 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_USB_XE) },
1800 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_EXPRESSCARD_320CX) },
1801 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV72E) },
1802 /* 30 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73E) },
1803 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_EC372S) },
1804 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
1805 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) },
1806 { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
1807 /* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
1808 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) },
1809 { USB_DEVICE(USB_VID_GIGABYTE, USB_PID_GIGABYTE_U8000) },
1810 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700PH) },
1811 { USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3000H) },
1812 /* 40 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E) },
1813 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV801E_SE) },
1814 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_EXPRESS) },
1815 { USB_DEVICE(USB_VID_TERRATEC,
1816 USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2) },
1817 { USB_DEVICE(USB_VID_SONY, USB_PID_SONY_PLAYTV) },
1818 /* 45 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_PD378S) },
1819 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC) },
1820 { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_TIGER_ATSC_B210) },
1821 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_MC770) },
1822 { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT) },
1823 /* 50 */{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DTT_Dlx) },
1824 { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_H) },
1825 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T3) },
1826 { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T5) },
1827 { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D) },
1828 /* 55 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D_2) },
1829 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73A) },
1830 { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV73ESE) },
1831 { USB_DEVICE(USB_VID_PCTV, USB_PID_PINNACLE_PCTV282E) },
1832 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7770P) },
1833 /* 60 */{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS_2) },
1834 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) },
1835 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) },
1836 { USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) },
1837 { USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) },
1838 /* 65 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) },
1839 { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) },
1840 { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK8096GP) },
1841 { USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_DIVERSITY) },
1842 { 0 } /* Terminating entry */
1844 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
1846 #define DIB0700_DEFAULT_DEVICE_PROPERTIES \
1847 .caps = DVB_USB_IS_AN_I2C_ADAPTER, \
1848 .usb_ctrl = DEVICE_SPECIFIC, \
1849 .firmware = "dvb-usb-dib0700-1.20.fw", \
1850 .download_firmware = dib0700_download_firmware, \
1851 .no_reconnect = 1, \
1852 .size_of_priv = sizeof(struct dib0700_state), \
1853 .i2c_algo = &dib0700_i2c_algo, \
1854 .identify_state = dib0700_identify_state
1856 #define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \
1857 .streaming_ctrl = dib0700_streaming_ctrl, \
1864 .buffersize = 39480, \
1869 struct dvb_usb_device_properties dib0700_devices[] = {
1871 DIB0700_DEFAULT_DEVICE_PROPERTIES,
1876 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
1877 .pid_filter_count = 32,
1878 .pid_filter = stk70x0p_pid_filter,
1879 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
1880 .frontend_attach = stk7700p_frontend_attach,
1881 .tuner_attach = stk7700p_tuner_attach,
1883 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
1887 .num_device_descs = 8,
1889 { "DiBcom STK7700P reference design",
1890 { &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] },
1893 { "Hauppauge Nova-T Stick",
1894 { &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL },
1897 { "AVerMedia AVerTV DVB-T Volar",
1898 { &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] },
1901 { "Compro Videomate U500",
1902 { &dib0700_usb_id_table[6], &dib0700_usb_id_table[19] },
1905 { "Uniwill STK7700P based (Hama and others)",
1906 { &dib0700_usb_id_table[7], NULL },
1909 { "Leadtek Winfast DTV Dongle (STK7700P based)",
1910 { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] },
1913 { "AVerMedia AVerTV DVB-T Express",
1914 { &dib0700_usb_id_table[20] },
1918 { &dib0700_usb_id_table[21], NULL },
1924 .rc_interval = DEFAULT_RC_INTERVAL,
1925 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
1926 .rc_query = dib0700_rc_query_old_firmware,
1928 .allowed_protos = IR_TYPE_RC5 |
1931 .change_protocol = dib0700_change_protocol,
1934 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
1939 .frontend_attach = bristol_frontend_attach,
1940 .tuner_attach = bristol_tuner_attach,
1942 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
1944 .frontend_attach = bristol_frontend_attach,
1945 .tuner_attach = bristol_tuner_attach,
1947 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
1951 .num_device_descs = 1,
1953 { "Hauppauge Nova-T 500 Dual DVB-T",
1954 { &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL },
1960 .rc_interval = DEFAULT_RC_INTERVAL,
1961 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
1962 .rc_query = dib0700_rc_query_old_firmware,
1964 .allowed_protos = IR_TYPE_RC5 |
1967 .change_protocol = dib0700_change_protocol,
1970 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
1975 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
1976 .pid_filter_count = 32,
1977 .pid_filter = stk70x0p_pid_filter,
1978 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
1979 .frontend_attach = stk7700d_frontend_attach,
1980 .tuner_attach = stk7700d_tuner_attach,
1982 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
1984 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
1985 .pid_filter_count = 32,
1986 .pid_filter = stk70x0p_pid_filter,
1987 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
1988 .frontend_attach = stk7700d_frontend_attach,
1989 .tuner_attach = stk7700d_tuner_attach,
1991 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
1995 .num_device_descs = 5,
1997 { "Pinnacle PCTV 2000e",
1998 { &dib0700_usb_id_table[11], NULL },
2001 { "Terratec Cinergy DT XS Diversity",
2002 { &dib0700_usb_id_table[12], NULL },
2005 { "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity",
2006 { &dib0700_usb_id_table[13], NULL },
2009 { "DiBcom STK7700D reference design",
2010 { &dib0700_usb_id_table[14], NULL },
2013 { "YUAN High-Tech DiBcom STK7700D",
2014 { &dib0700_usb_id_table[55], NULL },
2021 .rc_interval = DEFAULT_RC_INTERVAL,
2022 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
2023 .rc_query = dib0700_rc_query_old_firmware,
2025 .allowed_protos = IR_TYPE_RC5 |
2028 .change_protocol = dib0700_change_protocol,
2031 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
2036 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
2037 .pid_filter_count = 32,
2038 .pid_filter = stk70x0p_pid_filter,
2039 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
2040 .frontend_attach = stk7700P2_frontend_attach,
2041 .tuner_attach = stk7700d_tuner_attach,
2043 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
2047 .num_device_descs = 3,
2049 { "ASUS My Cinema U3000 Mini DVBT Tuner",
2050 { &dib0700_usb_id_table[23], NULL },
2054 { &dib0700_usb_id_table[31], NULL },
2057 { "Terratec Cinergy T Express",
2058 { &dib0700_usb_id_table[42], NULL },
2064 .rc_interval = DEFAULT_RC_INTERVAL,
2065 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
2066 .module_name = "dib0700",
2067 .rc_query = dib0700_rc_query_old_firmware,
2069 .allowed_protos = IR_TYPE_RC5 |
2072 .change_protocol = dib0700_change_protocol,
2075 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
2080 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
2081 .pid_filter_count = 32,
2082 .pid_filter = stk70x0p_pid_filter,
2083 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
2084 .frontend_attach = stk7070p_frontend_attach,
2085 .tuner_attach = dib7070p_tuner_attach,
2087 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
2089 .size_of_priv = sizeof(struct dib0700_adapter_state),
2093 .num_device_descs = 11,
2095 { "DiBcom STK7070P reference design",
2096 { &dib0700_usb_id_table[15], NULL },
2099 { "Pinnacle PCTV DVB-T Flash Stick",
2100 { &dib0700_usb_id_table[16], NULL },
2103 { "Artec T14BR DVB-T",
2104 { &dib0700_usb_id_table[22], NULL },
2107 { "ASUS My Cinema U3100 Mini DVBT Tuner",
2108 { &dib0700_usb_id_table[24], NULL },
2111 { "Hauppauge Nova-T Stick",
2112 { &dib0700_usb_id_table[25], NULL },
2115 { "Hauppauge Nova-T MyTV.t",
2116 { &dib0700_usb_id_table[26], NULL },
2119 { "Pinnacle PCTV 72e",
2120 { &dib0700_usb_id_table[29], NULL },
2123 { "Pinnacle PCTV 73e",
2124 { &dib0700_usb_id_table[30], NULL },
2127 { "Elgato EyeTV DTT",
2128 { &dib0700_usb_id_table[49], NULL },
2132 { &dib0700_usb_id_table[45], NULL },
2135 { "Elgato EyeTV Dtt Dlx PD378S",
2136 { &dib0700_usb_id_table[50], NULL },
2142 .rc_interval = DEFAULT_RC_INTERVAL,
2143 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
2144 .module_name = "dib0700",
2145 .rc_query = dib0700_rc_query_old_firmware,
2147 .allowed_protos = IR_TYPE_RC5 |
2150 .change_protocol = dib0700_change_protocol,
2153 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
2158 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
2159 .pid_filter_count = 32,
2160 .pid_filter = stk70x0p_pid_filter,
2161 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
2162 .frontend_attach = stk7070p_frontend_attach,
2163 .tuner_attach = dib7070p_tuner_attach,
2165 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
2167 .size_of_priv = sizeof(struct dib0700_adapter_state),
2171 .num_device_descs = 3,
2173 { "Pinnacle PCTV 73A",
2174 { &dib0700_usb_id_table[56], NULL },
2177 { "Pinnacle PCTV 73e SE",
2178 { &dib0700_usb_id_table[57], &dib0700_usb_id_table[65], NULL },
2181 { "Pinnacle PCTV 282e",
2182 { &dib0700_usb_id_table[58], &dib0700_usb_id_table[66], NULL },
2188 .rc_interval = DEFAULT_RC_INTERVAL,
2189 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
2190 .module_name = "dib0700",
2191 .rc_query = dib0700_rc_query_old_firmware,
2193 .allowed_protos = IR_TYPE_RC5 |
2196 .change_protocol = dib0700_change_protocol,
2199 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
2204 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
2205 .pid_filter_count = 32,
2206 .pid_filter = stk70x0p_pid_filter,
2207 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
2208 .frontend_attach = stk7070pd_frontend_attach0,
2209 .tuner_attach = dib7070p_tuner_attach,
2211 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
2213 .size_of_priv = sizeof(struct dib0700_adapter_state),
2215 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
2216 .pid_filter_count = 32,
2217 .pid_filter = stk70x0p_pid_filter,
2218 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
2219 .frontend_attach = stk7070pd_frontend_attach1,
2220 .tuner_attach = dib7070p_tuner_attach,
2222 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
2224 .size_of_priv = sizeof(struct dib0700_adapter_state),
2228 .num_device_descs = 6,
2230 { "DiBcom STK7070PD reference design",
2231 { &dib0700_usb_id_table[17], NULL },
2234 { "Pinnacle PCTV Dual DVB-T Diversity Stick",
2235 { &dib0700_usb_id_table[18], NULL },
2238 { "Hauppauge Nova-TD Stick (52009)",
2239 { &dib0700_usb_id_table[35], NULL },
2242 { "Hauppauge Nova-TD-500 (84xxx)",
2243 { &dib0700_usb_id_table[36], NULL },
2246 { "Terratec Cinergy DT USB XS Diversity/ T5",
2247 { &dib0700_usb_id_table[43],
2248 &dib0700_usb_id_table[53], NULL},
2252 { &dib0700_usb_id_table[44], NULL },
2258 .rc_interval = DEFAULT_RC_INTERVAL,
2259 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
2260 .module_name = "dib0700",
2261 .rc_query = dib0700_rc_query_old_firmware,
2263 .allowed_protos = IR_TYPE_RC5 |
2266 .change_protocol = dib0700_change_protocol,
2269 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
2274 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
2275 .pid_filter_count = 32,
2276 .pid_filter = stk70x0p_pid_filter,
2277 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
2278 .frontend_attach = stk7070pd_frontend_attach0,
2279 .tuner_attach = dib7070p_tuner_attach,
2281 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
2283 .size_of_priv = sizeof(struct dib0700_adapter_state),
2285 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
2286 .pid_filter_count = 32,
2287 .pid_filter = stk70x0p_pid_filter,
2288 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
2289 .frontend_attach = stk7070pd_frontend_attach1,
2290 .tuner_attach = dib7070p_tuner_attach,
2292 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
2294 .size_of_priv = sizeof(struct dib0700_adapter_state),
2298 .num_device_descs = 1,
2300 { "Elgato EyeTV Diversity",
2301 { &dib0700_usb_id_table[68], NULL },
2307 .rc_interval = DEFAULT_RC_INTERVAL,
2308 .rc_codes = RC_MAP_DIB0700_NEC_TABLE,
2309 .module_name = "dib0700",
2310 .rc_query = dib0700_rc_query_old_firmware,
2312 .allowed_protos = IR_TYPE_RC5 |
2315 .change_protocol = dib0700_change_protocol,
2318 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
2323 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
2324 .pid_filter_count = 32,
2325 .pid_filter = stk70x0p_pid_filter,
2326 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
2327 .frontend_attach = stk7700ph_frontend_attach,
2328 .tuner_attach = stk7700ph_tuner_attach,
2330 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
2332 .size_of_priv = sizeof(struct
2333 dib0700_adapter_state),
2337 .num_device_descs = 9,
2339 { "Terratec Cinergy HT USB XE",
2340 { &dib0700_usb_id_table[27], NULL },
2343 { "Pinnacle Expresscard 320cx",
2344 { &dib0700_usb_id_table[28], NULL },
2347 { "Terratec Cinergy HT Express",
2348 { &dib0700_usb_id_table[32], NULL },
2351 { "Gigabyte U8000-RH",
2352 { &dib0700_usb_id_table[37], NULL },
2355 { "YUAN High-Tech STK7700PH",
2356 { &dib0700_usb_id_table[38], NULL },
2359 { "Asus My Cinema-U3000Hybrid",
2360 { &dib0700_usb_id_table[39], NULL },
2363 { "YUAN High-Tech MC770",
2364 { &dib0700_usb_id_table[48], NULL },
2367 { "Leadtek WinFast DTV Dongle H",
2368 { &dib0700_usb_id_table[51], NULL },
2371 { "YUAN High-Tech STK7700D",
2372 { &dib0700_usb_id_table[54], NULL },
2378 .rc_interval = DEFAULT_RC_INTERVAL,
2379 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
2380 .module_name = "dib0700",
2381 .rc_query = dib0700_rc_query_old_firmware,
2383 .allowed_protos = IR_TYPE_RC5 |
2386 .change_protocol = dib0700_change_protocol,
2389 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
2393 .frontend_attach = s5h1411_frontend_attach,
2394 .tuner_attach = xc5000_tuner_attach,
2396 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
2398 .size_of_priv = sizeof(struct
2399 dib0700_adapter_state),
2403 .num_device_descs = 2,
2405 { "Pinnacle PCTV HD Pro USB Stick",
2406 { &dib0700_usb_id_table[40], NULL },
2409 { "Pinnacle PCTV HD USB Stick",
2410 { &dib0700_usb_id_table[41], NULL },
2416 .rc_interval = DEFAULT_RC_INTERVAL,
2417 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
2418 .module_name = "dib0700",
2419 .rc_query = dib0700_rc_query_old_firmware,
2421 .allowed_protos = IR_TYPE_RC5 |
2424 .change_protocol = dib0700_change_protocol,
2427 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
2431 .frontend_attach = lgdt3305_frontend_attach,
2432 .tuner_attach = mxl5007t_tuner_attach,
2434 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
2436 .size_of_priv = sizeof(struct
2437 dib0700_adapter_state),
2441 .num_device_descs = 2,
2443 { "Hauppauge ATSC MiniCard (B200)",
2444 { &dib0700_usb_id_table[46], NULL },
2447 { "Hauppauge ATSC MiniCard (B210)",
2448 { &dib0700_usb_id_table[47], NULL },
2452 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
2457 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
2458 .pid_filter_count = 32,
2459 .pid_filter = stk70x0p_pid_filter,
2460 .pid_filter_ctrl = stk70x0p_pid_filter_ctrl,
2461 .frontend_attach = stk7770p_frontend_attach,
2462 .tuner_attach = dib7770p_tuner_attach,
2464 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
2467 sizeof(struct dib0700_adapter_state),
2471 .num_device_descs = 2,
2473 { "DiBcom STK7770P reference design",
2474 { &dib0700_usb_id_table[59], NULL },
2477 { "Terratec Cinergy T USB XXS (HD)/ T3",
2478 { &dib0700_usb_id_table[33],
2479 &dib0700_usb_id_table[52],
2480 &dib0700_usb_id_table[60], NULL},
2486 .rc_interval = DEFAULT_RC_INTERVAL,
2487 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
2488 .module_name = "dib0700",
2489 .rc_query = dib0700_rc_query_old_firmware,
2491 .allowed_protos = IR_TYPE_RC5 |
2494 .change_protocol = dib0700_change_protocol,
2497 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
2501 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
2502 .pid_filter_count = 32,
2503 .pid_filter = stk80xx_pid_filter,
2504 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
2505 .frontend_attach = stk807x_frontend_attach,
2506 .tuner_attach = dib807x_tuner_attach,
2508 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
2511 sizeof(struct dib0700_adapter_state),
2515 .num_device_descs = 3,
2517 { "DiBcom STK807xP reference design",
2518 { &dib0700_usb_id_table[62], NULL },
2521 { "Prolink Pixelview SBTVD",
2522 { &dib0700_usb_id_table[63], NULL },
2525 { "EvolutePC TVWay+",
2526 { &dib0700_usb_id_table[64], NULL },
2532 .rc_interval = DEFAULT_RC_INTERVAL,
2533 .rc_codes = RC_MAP_DIB0700_NEC_TABLE,
2534 .module_name = "dib0700",
2535 .rc_query = dib0700_rc_query_old_firmware,
2537 .allowed_protos = IR_TYPE_RC5 |
2540 .change_protocol = dib0700_change_protocol,
2543 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
2547 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
2548 .pid_filter_count = 32,
2549 .pid_filter = stk80xx_pid_filter,
2550 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
2551 .frontend_attach = stk807xpvr_frontend_attach0,
2552 .tuner_attach = dib807x_tuner_attach,
2554 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
2557 sizeof(struct dib0700_adapter_state),
2560 .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
2561 .pid_filter_count = 32,
2562 .pid_filter = stk80xx_pid_filter,
2563 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
2564 .frontend_attach = stk807xpvr_frontend_attach1,
2565 .tuner_attach = dib807x_tuner_attach,
2567 DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
2570 sizeof(struct dib0700_adapter_state),
2574 .num_device_descs = 1,
2576 { "DiBcom STK807xPVR reference design",
2577 { &dib0700_usb_id_table[61], NULL },
2583 .rc_interval = DEFAULT_RC_INTERVAL,
2584 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
2585 .module_name = "dib0700",
2586 .rc_query = dib0700_rc_query_old_firmware,
2588 .allowed_protos = IR_TYPE_RC5 |
2591 .change_protocol = dib0700_change_protocol,
2594 }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
2598 .caps = DVB_USB_ADAP_HAS_PID_FILTER |
2599 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
2600 .pid_filter_count = 32,
2601 .pid_filter = stk80xx_pid_filter,
2602 .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
2603 .frontend_attach = stk809x_frontend_attach,
2604 .tuner_attach = dib809x_tuner_attach,
2606 DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
2609 sizeof(struct dib0700_adapter_state),
2613 .num_device_descs = 1,
2615 { "DiBcom STK8096GP reference design",
2616 { &dib0700_usb_id_table[67], NULL },
2622 .rc_interval = DEFAULT_RC_INTERVAL,
2623 .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
2624 .module_name = "dib0700",
2625 .rc_query = dib0700_rc_query_old_firmware,
2627 .allowed_protos = IR_TYPE_RC5 |
2630 .change_protocol = dib0700_change_protocol,
2636 int dib0700_device_count = ARRAY_SIZE(dib0700_devices);