Merge branch 'wm8996-rename' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie...
[pandora-kernel.git] / drivers / md / raid1.h
1 #ifndef _RAID1_H
2 #define _RAID1_H
3
4 typedef struct mirror_info mirror_info_t;
5
6 struct mirror_info {
7         mdk_rdev_t      *rdev;
8         sector_t        head_position;
9 };
10
11 /*
12  * memory pools need a pointer to the mddev, so they can force an unplug
13  * when memory is tight, and a count of the number of drives that the
14  * pool was allocated for, so they know how much to allocate and free.
15  * mddev->raid_disks cannot be used, as it can change while a pool is active
16  * These two datums are stored in a kmalloced struct.
17  */
18
19 struct pool_info {
20         mddev_t *mddev;
21         int     raid_disks;
22 };
23
24
25 typedef struct r1bio_s r1bio_t;
26
27 struct r1_private_data_s {
28         mddev_t                 *mddev;
29         mirror_info_t           *mirrors;
30         int                     raid_disks;
31         int                     last_used;
32         sector_t                next_seq_sect;
33         spinlock_t              device_lock;
34
35         struct list_head        retry_list;
36         /* queue pending writes and submit them on unplug */
37         struct bio_list         pending_bio_list;
38
39         /* for use when syncing mirrors: */
40
41         spinlock_t              resync_lock;
42         int                     nr_pending;
43         int                     nr_waiting;
44         int                     nr_queued;
45         int                     barrier;
46         sector_t                next_resync;
47         int                     fullsync;  /* set to 1 if a full sync is needed,
48                                             * (fresh device added).
49                                             * Cleared when a sync completes.
50                                             */
51         int                     recovery_disabled; /* when the same as
52                                                     * mddev->recovery_disabled
53                                                     * we don't allow recovery
54                                                     * to be attempted as we
55                                                     * expect a read error
56                                                     */
57
58         wait_queue_head_t       wait_barrier;
59
60         struct pool_info        *poolinfo;
61
62         struct page             *tmppage;
63
64         mempool_t *r1bio_pool;
65         mempool_t *r1buf_pool;
66
67         /* When taking over an array from a different personality, we store
68          * the new thread here until we fully activate the array.
69          */
70         struct mdk_thread_s     *thread;
71 };
72
73 typedef struct r1_private_data_s conf_t;
74
75 /*
76  * this is our 'private' RAID1 bio.
77  *
78  * it contains information about what kind of IO operations were started
79  * for this RAID1 operation, and about their status:
80  */
81
82 struct r1bio_s {
83         atomic_t                remaining; /* 'have we finished' count,
84                                             * used from IRQ handlers
85                                             */
86         atomic_t                behind_remaining; /* number of write-behind ios remaining
87                                                  * in this BehindIO request
88                                                  */
89         sector_t                sector;
90         int                     sectors;
91         unsigned long           state;
92         mddev_t                 *mddev;
93         /*
94          * original bio going to /dev/mdx
95          */
96         struct bio              *master_bio;
97         /*
98          * if the IO is in READ direction, then this is where we read
99          */
100         int                     read_disk;
101
102         struct list_head        retry_list;
103         /* Next two are only valid when R1BIO_BehindIO is set */
104         struct bio_vec          *behind_bvecs;
105         int                     behind_page_count;
106         /*
107          * if the IO is in WRITE direction, then multiple bios are used.
108          * We choose the number when they are allocated.
109          */
110         struct bio              *bios[0];
111         /* DO NOT PUT ANY NEW FIELDS HERE - bios array is contiguously alloced*/
112 };
113
114 /* when we get a read error on a read-only array, we redirect to another
115  * device without failing the first device, or trying to over-write to
116  * correct the read error.  To keep track of bad blocks on a per-bio
117  * level, we store IO_BLOCKED in the appropriate 'bios' pointer
118  */
119 #define IO_BLOCKED ((struct bio *)1)
120 /* When we successfully write to a known bad-block, we need to remove the
121  * bad-block marking which must be done from process context.  So we record
122  * the success by setting bios[n] to IO_MADE_GOOD
123  */
124 #define IO_MADE_GOOD ((struct bio *)2)
125
126 #define BIO_SPECIAL(bio) ((unsigned long)bio <= 2)
127
128 /* bits for r1bio.state */
129 #define R1BIO_Uptodate  0
130 #define R1BIO_IsSync    1
131 #define R1BIO_Degraded  2
132 #define R1BIO_BehindIO  3
133 /* Set ReadError on bios that experience a readerror so that
134  * raid1d knows what to do with them.
135  */
136 #define R1BIO_ReadError 4
137 /* For write-behind requests, we call bi_end_io when
138  * the last non-write-behind device completes, providing
139  * any write was successful.  Otherwise we call when
140  * any write-behind write succeeds, otherwise we call
141  * with failure when last write completes (and all failed).
142  * Record that bi_end_io was called with this flag...
143  */
144 #define R1BIO_Returned 6
145 /* If a write for this request means we can clear some
146  * known-bad-block records, we set this flag
147  */
148 #define R1BIO_MadeGood 7
149 #define R1BIO_WriteError 8
150
151 extern int md_raid1_congested(mddev_t *mddev, int bits);
152
153 #endif