drivers/i2c/chips/tps65010.c

   1 /*
   2  * tps65010 - driver for tps6501x power management chips
   3  *
   4  * Copyright (C) 2004 Texas Instruments
   5  * Copyright (C) 2004-2005 David Brownell
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  20  */
  21
  22 #include <linux/config.h>
  23 #include <linux/kernel.h>
  24 #include <linux/module.h>
  25 #include <linux/init.h>
  26 #include <linux/slab.h>
  27 #include <linux/interrupt.h>
  28 #include <linux/device.h>
  29 #include <linux/i2c.h>
  30 #include <linux/delay.h>
  31 #include <linux/workqueue.h>
  32 #include <linux/suspend.h>
  33 #include <linux/debugfs.h>
  34 #include <linux/seq_file.h>
  35
  36 #include <asm/irq.h>
  37 #include <asm/mach-types.h>
  38
  39 #include <asm/arch/gpio.h>
  40 #include <asm/arch/mux.h>
  41 #include <asm/arch/tps65010.h>
  42
  43 /*-------------------------------------------------------------------------*/
  44
  45 #define DRIVER_VERSION  "2 May 2005"
  46 #define DRIVER_NAME     (tps65010_driver.name)
  47
  48 MODULE_DESCRIPTION("TPS6501x Power Management Driver");
  49 MODULE_LICENSE("GPL");
  50
  51 static unsigned short normal_i2c[] = { 0x48, /* 0x49, */ I2C_CLIENT_END };
  52 static unsigned short normal_i2c_range[] = { I2C_CLIENT_END };
  53
  54 I2C_CLIENT_INSMOD;
  55
  56 static struct i2c_driver tps65010_driver;
  57
  58 /*-------------------------------------------------------------------------*/
  59
  60 /* This driver handles a family of multipurpose chips, which incorporate
  61  * voltage regulators, lithium ion/polymer battery charging, GPIOs, LEDs,
  62  * and other features often needed in portable devices like cell phones
  63  * or digital cameras.
  64  *
  65  * The tps65011 and tps65013 have different voltage settings compared
  66  * to tps65010 and tps65012.  The tps65013 has a NO_CHG status/irq.
  67  * All except tps65010 have "wait" mode, possibly defaulted so that
  68  * battery-insert != device-on.
  69  *
  70  * We could distinguish between some models by checking VDCDC1.UVLO or
  71  * other registers, unless they've been changed already after powerup
  72  * as part of board setup by a bootloader.
  73  */
  74 enum tps_model {
  75         TPS_UNKNOWN = 0,
  76         TPS65010,
  77         TPS65011,
  78         TPS65012,
  79         TPS65013,
  80 };
  81
  82 struct tps65010 {
  83         struct i2c_client       client;
  84         struct semaphore        lock;
  85         int                     irq;
  86         struct work_struct      work;
  87         struct dentry           *file;
  88         unsigned                charging:1;
  89         unsigned                por:1;
  90         unsigned                model:8;
  91         u16                     vbus;
  92         unsigned long           flags;
  93 #define FLAG_VBUS_CHANGED       0
  94 #define FLAG_IRQ_ENABLE         1
  95
  96         /* copies of last register state */
  97         u8                      chgstatus, regstatus, chgconf;
  98         u8                      nmask1, nmask2;
  99
 100         /* not currently tracking GPIO state */
 101 };
 102
 103 #define POWER_POLL_DELAY        msecs_to_jiffies(800)
 104
 105 /*-------------------------------------------------------------------------*/
 106
 107 #if     defined(DEBUG) || defined(CONFIG_DEBUG_FS)
 108
 109 static void dbg_chgstat(char *buf, size_t len, u8 chgstatus)
 110 {
 111         snprintf(buf, len, "%02x%s%s%s%s%s%s%s%s\n",
 112                 chgstatus,
 113                 (chgstatus & TPS_CHG_USB) ? " USB" : "",
 114                 (chgstatus & TPS_CHG_AC) ? " AC" : "",
 115                 (chgstatus & TPS_CHG_THERM) ? " therm" : "",
 116                 (chgstatus & TPS_CHG_TERM) ? " done" :
 117                         ((chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
 118                                 ? " (charging)" : ""),
 119                 (chgstatus & TPS_CHG_TAPER_TMO) ? " taper_tmo" : "",
 120                 (chgstatus & TPS_CHG_CHG_TMO) ? " charge_tmo" : "",
 121                 (chgstatus & TPS_CHG_PRECHG_TMO) ? " prechg_tmo" : "",
 122                 (chgstatus & TPS_CHG_TEMP_ERR) ? " temp_err" : "");
 123 }
 124
 125 static void dbg_regstat(char *buf, size_t len, u8 regstatus)
 126 {
 127         snprintf(buf, len, "%02x %s%s%s%s%s%s%s%s\n",
 128                 regstatus,
 129                 (regstatus & TPS_REG_ONOFF) ? "off" : "(on)",
 130                 (regstatus & TPS_REG_COVER) ? " uncover" : "",
 131                 (regstatus & TPS_REG_UVLO) ? " UVLO" : "",
 132                 (regstatus & TPS_REG_NO_CHG) ? " NO_CHG" : "",
 133                 (regstatus & TPS_REG_PG_LD02) ? " ld02_bad" : "",
 134                 (regstatus & TPS_REG_PG_LD01) ? " ld01_bad" : "",
 135                 (regstatus & TPS_REG_PG_MAIN) ? " main_bad" : "",
 136                 (regstatus & TPS_REG_PG_CORE) ? " core_bad" : "");
 137 }
 138
 139 static void dbg_chgconf(int por, char *buf, size_t len, u8 chgconfig)
 140 {
 141         const char *hibit;
 142
 143         if (por)
 144                 hibit = (chgconfig & TPS_CHARGE_POR)
 145                                 ? "POR=69ms" : "POR=1sec";
 146         else
 147                 hibit = (chgconfig & TPS65013_AUA) ? "AUA" : "";
 148
 149         snprintf(buf, len, "%02x %s%s%s AC=%d%% USB=%dmA %sCharge\n",
 150                 chgconfig, hibit,
 151                 (chgconfig & TPS_CHARGE_RESET) ? " reset" : "",
 152                 (chgconfig & TPS_CHARGE_FAST) ? " fast" : "",
 153                 ({int p; switch ((chgconfig >> 3) & 3) {
 154                 case 3:         p = 100; break;
 155                 case 2:         p = 75; break;
 156                 case 1:         p = 50; break;
 157                 default:        p = 25; break;
 158                 }; p; }),
 159                 (chgconfig & TPS_VBUS_CHARGING)
 160                         ? ((chgconfig & TPS_VBUS_500MA) ? 500 : 100)
 161                         : 0,
 162                 (chgconfig & TPS_CHARGE_ENABLE) ? "" : "No");
 163 }
 164
 165 #endif
 166
 167 #ifdef  DEBUG
 168
 169 static void show_chgstatus(const char *label, u8 chgstatus)
 170 {
 171         char buf [100];
 172
 173         dbg_chgstat(buf, sizeof buf, chgstatus);
 174         pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
 175 }
 176
 177 static void show_regstatus(const char *label, u8 regstatus)
 178 {
 179         char buf [100];
 180
 181         dbg_regstat(buf, sizeof buf, regstatus);
 182         pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
 183 }
 184
 185 static void show_chgconfig(int por, const char *label, u8 chgconfig)
 186 {
 187         char buf [100];
 188
 189         dbg_chgconf(por, buf, sizeof buf, chgconfig);
 190         pr_debug("%s: %s %s", DRIVER_NAME, label, buf);
 191 }
 192
 193 #else
 194
 195 static inline void show_chgstatus(const char *label, u8 chgstatus) { }
 196 static inline void show_regstatus(const char *label, u8 chgstatus) { }
 197 static inline void show_chgconfig(int por, const char *label, u8 chgconfig) { }
 198
 199 #endif
 200
 201 #ifdef  CONFIG_DEBUG_FS
 202
 203 static int dbg_show(struct seq_file *s, void *_)
 204 {
 205         struct tps65010 *tps = s->private;
 206         u8              value, v2;
 207         unsigned        i;
 208         char            buf[100];
 209         const char      *chip;
 210
 211         switch (tps->model) {
 212         case TPS65010:  chip = "tps65010"; break;
 213         case TPS65011:  chip = "tps65011"; break;
 214         case TPS65012:  chip = "tps65012"; break;
 215         case TPS65013:  chip = "tps65013"; break;
 216         default:        chip = NULL; break;
 217         }
 218         seq_printf(s, "driver  %s\nversion %s\nchip    %s\n\n",
 219                         DRIVER_NAME, DRIVER_VERSION, chip);
 220
 221         down(&tps->lock);
 222
 223         /* FIXME how can we tell whether a battery is present?
 224          * likely involves a charge gauging chip (like BQ26501).
 225          */
 226
 227         seq_printf(s, "%scharging\n\n", tps->charging ? "" : "(not) ");
 228
 229
 230         /* registers for monitoring battery charging and status; note
 231          * that reading chgstat and regstat may ack IRQs...
 232          */
 233         value = i2c_smbus_read_byte_data(&tps->client, TPS_CHGCONFIG);
 234         dbg_chgconf(tps->por, buf, sizeof buf, value);
 235         seq_printf(s, "chgconfig %s", buf);
 236
 237         value = i2c_smbus_read_byte_data(&tps->client, TPS_CHGSTATUS);
 238         dbg_chgstat(buf, sizeof buf, value);
 239         seq_printf(s, "chgstat   %s", buf);
 240         value = i2c_smbus_read_byte_data(&tps->client, TPS_MASK1);
 241         dbg_chgstat(buf, sizeof buf, value);
 242         seq_printf(s, "mask1     %s", buf);
 243         /* ignore ackint1 */
 244
 245         value = i2c_smbus_read_byte_data(&tps->client, TPS_REGSTATUS);
 246         dbg_regstat(buf, sizeof buf, value);
 247         seq_printf(s, "regstat   %s", buf);
 248         value = i2c_smbus_read_byte_data(&tps->client, TPS_MASK2);
 249         dbg_regstat(buf, sizeof buf, value);
 250         seq_printf(s, "mask2     %s\n", buf);
 251         /* ignore ackint2 */
 252
 253         (void) schedule_delayed_work(&tps->work, POWER_POLL_DELAY);
 254
 255
 256         /* VMAIN voltage, enable lowpower, etc */
 257         value = i2c_smbus_read_byte_data(&tps->client, TPS_VDCDC1);
 258         seq_printf(s, "vdcdc1    %02x\n", value);
 259
 260         /* VCORE voltage, vibrator on/off */
 261         value = i2c_smbus_read_byte_data(&tps->client, TPS_VDCDC2);
 262         seq_printf(s, "vdcdc2    %02x\n", value);
 263
 264         /* both LD0s, and their lowpower behavior */
 265         value = i2c_smbus_read_byte_data(&tps->client, TPS_VREGS1);
 266         seq_printf(s, "vregs1    %02x\n\n", value);
 267
 268
 269         /* LEDs and GPIOs */
 270         value = i2c_smbus_read_byte_data(&tps->client, TPS_LED1_ON);
 271         v2 = i2c_smbus_read_byte_data(&tps->client, TPS_LED1_PER);
 272         seq_printf(s, "led1 %s, on=%02x, per=%02x, %d/%d msec\n",
 273                 (value & 0x80)
 274                         ? ((v2 & 0x80) ? "on" : "off")
 275                         : ((v2 & 0x80) ? "blink" : "(nPG)"),
 276                 value, v2,
 277                 (value & 0x7f) * 10, (v2 & 0x7f) * 100);
 278
 279         value = i2c_smbus_read_byte_data(&tps->client, TPS_LED2_ON);
 280         v2 = i2c_smbus_read_byte_data(&tps->client, TPS_LED2_PER);
 281         seq_printf(s, "led2 %s, on=%02x, per=%02x, %d/%d msec\n",
 282                 (value & 0x80)
 283                         ? ((v2 & 0x80) ? "on" : "off")
 284                         : ((v2 & 0x80) ? "blink" : "off"),
 285                 value, v2,
 286                 (value & 0x7f) * 10, (v2 & 0x7f) * 100);
 287
 288         value = i2c_smbus_read_byte_data(&tps->client, TPS_DEFGPIO);
 289         v2 = i2c_smbus_read_byte_data(&tps->client, TPS_MASK3);
 290         seq_printf(s, "defgpio %02x mask3 %02x\n", value, v2);
 291
 292         for (i = 0; i < 4; i++) {
 293                 if (value & (1 << (4 + i)))
 294                         seq_printf(s, "  gpio%d-out %s\n", i + 1,
 295                                 (value & (1 << i)) ? "low" : "hi ");
 296                 else
 297                         seq_printf(s, "  gpio%d-in  %s %s %s\n", i + 1,
 298                                 (value & (1 << i)) ? "hi " : "low",
 299                                 (v2 & (1 << i)) ? "no-irq" : "irq",
 300                                 (v2 & (1 << (4 + i))) ? "rising" : "falling");
 301         }
 302
 303         up(&tps->lock);
 304         return 0;
 305 }
 306
 307 static int dbg_tps_open(struct inode *inode, struct file *file)
 308 {
 309         return single_open(file, dbg_show, inode->u.generic_ip);
 310 }
 311
 312 static struct file_operations debug_fops = {
 313         .open           = dbg_tps_open,
 314         .read           = seq_read,
 315         .llseek         = seq_lseek,
 316         .release        = single_release,
 317 };
 318
 319 #define DEBUG_FOPS      &debug_fops
 320
 321 #else
 322 #define DEBUG_FOPS      NULL
 323 #endif
 324
 325 /*-------------------------------------------------------------------------*/
 326
 327 /* handle IRQS in a task context, so we can use I2C calls */
 328 static void tps65010_interrupt(struct tps65010 *tps)
 329 {
 330         u8 tmp = 0, mask, poll;
 331
 332         /* IRQs won't trigger irqs for certain events, but we can get
 333          * others by polling (normally, with external power applied).
 334          */
 335         poll = 0;
 336
 337         /* regstatus irqs */
 338         if (tps->nmask2) {
 339                 tmp = i2c_smbus_read_byte_data(&tps->client, TPS_REGSTATUS);
 340                 mask = tmp ^ tps->regstatus;
 341                 tps->regstatus = tmp;
 342                 mask &= tps->nmask2;
 343         } else
 344                 mask = 0;
 345         if (mask) {
 346                 tps->regstatus =  tmp;
 347                 /* may need to shut something down ... */
 348
 349                 /* "off" usually means deep sleep */
 350                 if (tmp & TPS_REG_ONOFF) {
 351                         pr_info("%s: power off button\n", DRIVER_NAME);
 352 #if 0
 353                         /* REVISIT:  this might need its own workqueue
 354                          * plus tweaks including deadlock avoidance ...
 355                          */
 356                         software_suspend();
 357 #endif
 358                         poll = 1;
 359                 }
 360         }
 361
 362         /* chgstatus irqs */
 363         if (tps->nmask1) {
 364                 tmp = i2c_smbus_read_byte_data(&tps->client, TPS_CHGSTATUS);
 365                 mask = tmp ^ tps->chgstatus;
 366                 tps->chgstatus = tmp;
 367                 mask &= tps->nmask1;
 368         } else
 369                 mask = 0;
 370         if (mask) {
 371                 unsigned        charging = 0;
 372
 373                 show_chgstatus("chg/irq", tmp);
 374                 if (tmp & (TPS_CHG_USB|TPS_CHG_AC))
 375                         show_chgconfig(tps->por, "conf", tps->chgconf);
 376
 377                 /* Unless it was turned off or disabled, we charge any
 378                  * battery whenever there's power available for it
 379                  * and the charger hasn't been disabled.
 380                  */
 381                 if (!(tps->chgstatus & ~(TPS_CHG_USB|TPS_CHG_AC))
 382                                 && (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
 383                                 && (tps->chgconf & TPS_CHARGE_ENABLE)
 384                                 ) {
 385                         if (tps->chgstatus & TPS_CHG_USB) {
 386                                 /* VBUS options are readonly until reconnect */
 387                                 if (mask & TPS_CHG_USB)
 388                                         set_bit(FLAG_VBUS_CHANGED, &tps->flags);
 389                                 charging = 1;
 390                         } else if (tps->chgstatus & TPS_CHG_AC)
 391                                 charging = 1;
 392                 }
 393                 if (charging != tps->charging) {
 394                         tps->charging = charging;
 395                         pr_info("%s: battery %scharging\n",
 396                                 DRIVER_NAME, charging ? "" :
 397                                 ((tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC))
 398                                         ? "NOT " : "dis"));
 399                 }
 400         }
 401
 402         /* always poll to detect (a) power removal, without tps65013
 403          * NO_CHG IRQ; or (b) restart of charging after stop.
 404          */
 405         if ((tps->model != TPS65013 || !tps->charging)
 406                         && (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC)))
 407                 poll = 1;
 408         if (poll)
 409                 (void) schedule_delayed_work(&tps->work, POWER_POLL_DELAY);
 410
 411         /* also potentially gpio-in rise or fall */
 412 }
 413
 414 /* handle IRQs and polling using keventd for now */
 415 static void tps65010_work(void *_tps)
 416 {
 417         struct tps65010         *tps = _tps;
 418
 419         down(&tps->lock);
 420
 421         tps65010_interrupt(tps);
 422
 423         if (test_and_clear_bit(FLAG_VBUS_CHANGED, &tps->flags)) {
 424                 int     status;
 425                 u8      chgconfig, tmp;
 426
 427                 chgconfig = i2c_smbus_read_byte_data(&tps->client,
 428                                         TPS_CHGCONFIG);
 429                 chgconfig &= ~(TPS_VBUS_500MA | TPS_VBUS_CHARGING);
 430                 if (tps->vbus == 500)
 431                         chgconfig |= TPS_VBUS_500MA | TPS_VBUS_CHARGING;
 432                 else if (tps->vbus >= 100)
 433                         chgconfig |= TPS_VBUS_CHARGING;
 434
 435                 status = i2c_smbus_write_byte_data(&tps->client,
 436                                 TPS_CHGCONFIG, chgconfig);
 437
 438                 /* vbus update fails unless VBUS is connected! */
 439                 tmp = i2c_smbus_read_byte_data(&tps->client, TPS_CHGCONFIG);
 440                 tps->chgconf = tmp;
 441                 show_chgconfig(tps->por, "update vbus", tmp);
 442         }
 443
 444         if (test_and_clear_bit(FLAG_IRQ_ENABLE, &tps->flags))
 445                 enable_irq(tps->irq);
 446
 447         up(&tps->lock);
 448 }
 449
 450 static irqreturn_t tps65010_irq(int irq, void *_tps, struct pt_regs *regs)
 451 {
 452         struct tps65010         *tps = _tps;
 453
 454         disable_irq_nosync(irq);
 455         set_bit(FLAG_IRQ_ENABLE, &tps->flags);
 456         (void) schedule_work(&tps->work);
 457         return IRQ_HANDLED;
 458 }
 459
 460 /*-------------------------------------------------------------------------*/
 461
 462 static struct tps65010 *the_tps;
 463
 464 static int __exit tps65010_detach_client(struct i2c_client *client)
 465 {
 466         struct tps65010         *tps;
 467
 468         tps = container_of(client, struct tps65010, client);
 469 #ifdef  CONFIG_ARM
 470         if (machine_is_omap_h2())
 471                 omap_free_gpio(58);
 472         if (machine_is_omap_osk())
 473                 omap_free_gpio(OMAP_MPUIO(1));
 474 #endif
 475         free_irq(tps->irq, tps);
 476         debugfs_remove(tps->file);
 477         if (i2c_detach_client(client) == 0)
 478                 kfree(tps);
 479         the_tps = NULL;
 480         return 0;
 481 }
 482
 483 static int tps65010_noscan(struct i2c_adapter *bus)
 484 {
 485         /* pure paranoia, in case someone adds another i2c bus
 486          * after our init section's gone...
 487          */
 488         return -ENODEV;
 489 }
 490
 491 /* no error returns, they'd just make bus scanning stop */
 492 static int __init
 493 tps65010_probe(struct i2c_adapter *bus, int address, int kind)
 494 {
 495         struct tps65010         *tps;
 496         int                     status;
 497
 498         if (the_tps) {
 499                 dev_dbg(&bus->dev, "only one %s for now\n", DRIVER_NAME);
 500                 return 0;
 501         }
 502
 503         tps = kmalloc(sizeof *tps, GFP_KERNEL);
 504         if (!tps)
 505                 return 0;
 506
 507         memset(tps, 0, sizeof *tps);
 508         init_MUTEX(&tps->lock);
 509         INIT_WORK(&tps->work, tps65010_work, tps);
 510         tps->irq = -1;
 511         tps->client.addr = address;
 512         tps->client.adapter = bus;
 513         tps->client.driver = &tps65010_driver;
 514         strlcpy(tps->client.name, DRIVER_NAME, I2C_NAME_SIZE);
 515
 516         status = i2c_attach_client(&tps->client);
 517         if (status < 0) {
 518                 dev_dbg(&bus->dev, "can't attach %s to device %d, err %d\n",
 519                                 DRIVER_NAME, address, status);
 520                 goto fail1;
 521         }
 522
 523 #ifdef  CONFIG_ARM
 524         if (machine_is_omap_h2()) {
 525                 tps->model = TPS65010;
 526                 omap_cfg_reg(W4_GPIO58);
 527                 tps->irq = OMAP_GPIO_IRQ(58);
 528                 omap_request_gpio(58);
 529                 omap_set_gpio_direction(58, 1);
 530                 set_irq_type(tps->irq, IRQT_FALLING);
 531         }
 532         if (machine_is_omap_osk()) {
 533                 tps->model = TPS65010;
 534                 // omap_cfg_reg(U19_1610_MPUIO1);
 535                 tps->irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1));
 536                 omap_request_gpio(OMAP_MPUIO(1));
 537                 omap_set_gpio_direction(OMAP_MPUIO(1), 1);
 538                 set_irq_type(tps->irq, IRQT_FALLING);
 539         }
 540         if (machine_is_omap_h3()) {
 541                 tps->model = TPS65013;
 542
 543                 // FIXME set up this board's IRQ ...
 544         }
 545 #else
 546 #define set_irq_type(num,trigger)       do{}while(0)
 547 #endif
 548
 549         if (tps->irq > 0) {
 550                 set_irq_type(tps->irq, IRQT_LOW);
 551                 status = request_irq(tps->irq, tps65010_irq,
 552                         SA_SAMPLE_RANDOM, DRIVER_NAME, tps);
 553                 if (status < 0) {
 554                         dev_dbg(&tps->client.dev, "can't get IRQ %d, err %d\n",
 555                                         tps->irq, status);
 556                         i2c_detach_client(&tps->client);
 557                         goto fail1;
 558                 }
 559 #ifdef  CONFIG_ARM
 560                 /* annoying race here, ideally we'd have an option
 561                  * to claim the irq now and enable it later.
 562                  */
 563                 disable_irq(tps->irq);
 564                 set_bit(FLAG_IRQ_ENABLE, &tps->flags);
 565 #endif
 566         } else
 567                 printk(KERN_WARNING "%s: IRQ not configured!\n",
 568                                 DRIVER_NAME);
 569
 570
 571         switch (tps->model) {
 572         case TPS65010:
 573         case TPS65012:
 574                 tps->por = 1;
 575                 break;
 576         case TPS_UNKNOWN:
 577                 printk(KERN_WARNING "%s: unknown TPS chip\n", DRIVER_NAME);
 578                 break;
 579         /* else CHGCONFIG.POR is replaced by AUA, enabling a WAIT mode */
 580         }
 581         tps->chgconf = i2c_smbus_read_byte_data(&tps->client, TPS_CHGCONFIG);
 582         show_chgconfig(tps->por, "conf/init", tps->chgconf);
 583
 584         show_chgstatus("chg/init",
 585                 i2c_smbus_read_byte_data(&tps->client, TPS_CHGSTATUS));
 586         show_regstatus("reg/init",
 587                 i2c_smbus_read_byte_data(&tps->client, TPS_REGSTATUS));
 588
 589         pr_debug("%s: vdcdc1 0x%02x, vdcdc2 %02x, vregs1 %02x\n", DRIVER_NAME,
 590                 i2c_smbus_read_byte_data(&tps->client, TPS_VDCDC1),
 591                 i2c_smbus_read_byte_data(&tps->client, TPS_VDCDC2),
 592                 i2c_smbus_read_byte_data(&tps->client, TPS_VREGS1));
 593         pr_debug("%s: defgpio 0x%02x, mask3 0x%02x\n", DRIVER_NAME,
 594                 i2c_smbus_read_byte_data(&tps->client, TPS_DEFGPIO),
 595                 i2c_smbus_read_byte_data(&tps->client, TPS_MASK3));
 596
 597         tps65010_driver.attach_adapter = tps65010_noscan;
 598         the_tps = tps;
 599
 600 #if     defined(CONFIG_USB_GADGET) && !defined(CONFIG_USB_OTG)
 601         /* USB hosts can't draw VBUS.  OTG devices could, later
 602          * when OTG infrastructure enables it.  USB peripherals
 603          * could be relying on VBUS while booting, though.
 604          */
 605         tps->vbus = 100;
 606 #endif
 607
 608         /* unmask the "interesting" irqs, then poll once to
 609          * kickstart monitoring, initialize shadowed status
 610          * registers, and maybe disable VBUS draw.
 611          */
 612         tps->nmask1 = ~0;
 613         (void) i2c_smbus_write_byte_data(&tps->client, TPS_MASK1, ~tps->nmask1);
 614
 615         tps->nmask2 = TPS_REG_ONOFF;
 616         if (tps->model == TPS65013)
 617                 tps->nmask2 |= TPS_REG_NO_CHG;
 618         (void) i2c_smbus_write_byte_data(&tps->client, TPS_MASK2, ~tps->nmask2);
 619
 620         (void) i2c_smbus_write_byte_data(&tps->client, TPS_MASK3, 0x0f
 621                 | i2c_smbus_read_byte_data(&tps->client, TPS_MASK3));
 622
 623         tps65010_work(tps);
 624
 625         tps->file = debugfs_create_file(DRIVER_NAME, S_IRUGO, NULL,
 626                                 tps, DEBUG_FOPS);
 627         return 0;
 628 fail1:
 629         kfree(tps);
 630         return 0;
 631 }
 632
 633 static int __init tps65010_scan_bus(struct i2c_adapter *bus)
 634 {
 635         if (!i2c_check_functionality(bus, I2C_FUNC_SMBUS_BYTE_DATA))
 636                 return -EINVAL;
 637         return i2c_probe(bus, &addr_data, tps65010_probe);
 638 }
 639
 640 static struct i2c_driver tps65010_driver = {
 641         .owner          = THIS_MODULE,
 642         .name           = "tps65010",
 643         .flags          = I2C_DF_NOTIFY,
 644         .attach_adapter = tps65010_scan_bus,
 645         .detach_client  = __exit_p(tps65010_detach_client),
 646 };
 647
 648 /*-------------------------------------------------------------------------*/
 649
 650 /* Draw from VBUS:
 651  *   0 mA -- DON'T DRAW (might supply power instead)
 652  * 100 mA -- usb unit load (slowest charge rate)
 653  * 500 mA -- usb high power (fast battery charge)
 654  */
 655 int tps65010_set_vbus_draw(unsigned mA)
 656 {
 657         unsigned long   flags;
 658
 659         if (!the_tps)
 660                 return -ENODEV;
 661
 662         /* assumes non-SMP */
 663         local_irq_save(flags);
 664         if (mA >= 500)
 665                 mA = 500;
 666         else if (mA >= 100)
 667                 mA = 100;
 668         else
 669                 mA = 0;
 670         the_tps->vbus = mA;
 671         if ((the_tps->chgstatus & TPS_CHG_USB)
 672                         && test_and_set_bit(
 673                                 FLAG_VBUS_CHANGED, &the_tps->flags)) {
 674                 /* gadget drivers call this in_irq() */
 675                 (void) schedule_work(&the_tps->work);
 676         }
 677         local_irq_restore(flags);
 678
 679         return 0;
 680 }
 681 EXPORT_SYMBOL(tps65010_set_vbus_draw);
 682
 683 /*-------------------------------------------------------------------------*/
 684 /* tps65010_set_gpio_out_value parameter:
 685  * gpio:  GPIO1, GPIO2, GPIO3 or GPIO4
 686  * value: LOW or HIGH
 687  */
 688 int tps65010_set_gpio_out_value(unsigned gpio, unsigned value)
 689 {
 690         int      status;
 691         unsigned defgpio;
 692
 693         if (!the_tps)
 694                 return -ENODEV;
 695         if ((gpio < GPIO1) || (gpio > GPIO4))
 696                 return -EINVAL;
 697
 698         down(&the_tps->lock);
 699
 700         defgpio = i2c_smbus_read_byte_data(&the_tps->client, TPS_DEFGPIO);
 701
 702         /* Configure GPIO for output */
 703         defgpio |= 1 << (gpio + 3);
 704
 705         /* Writing 1 forces a logic 0 on that GPIO and vice versa */
 706         switch (value) {
 707         case LOW:
 708                 defgpio |= 1 << (gpio - 1);    /* set GPIO low by writing 1 */
 709                 break;
 710         /* case HIGH: */
 711         default:
 712                 defgpio &= ~(1 << (gpio - 1)); /* set GPIO high by writing 0 */
 713                 break;
 714         }
 715
 716         status = i2c_smbus_write_byte_data(&the_tps->client,
 717                 TPS_DEFGPIO, defgpio);
 718
 719         pr_debug("%s: gpio%dout = %s, defgpio 0x%02x\n", DRIVER_NAME,
 720                 gpio, value ? "high" : "low",
 721                 i2c_smbus_read_byte_data(&the_tps->client, TPS_DEFGPIO));
 722
 723         up(&the_tps->lock);
 724         return status;
 725 }
 726 EXPORT_SYMBOL(tps65010_set_gpio_out_value);
 727
 728 /*-------------------------------------------------------------------------*/
 729 /* tps65010_set_led parameter:
 730  * led:  LED1 or LED2
 731  * mode: ON, OFF or BLINK
 732  */
 733 int tps65010_set_led(unsigned led, unsigned mode)
 734 {
 735         int      status;
 736         unsigned led_on, led_per, offs;
 737
 738         if (!the_tps)
 739                 return -ENODEV;
 740
 741         if (led == LED1)
 742                 offs = 0;
 743         else {
 744                 offs = 2;
 745                 led = LED2;
 746         }
 747
 748         down(&the_tps->lock);
 749
 750         pr_debug("%s: led%i_on   0x%02x\n", DRIVER_NAME, led,
 751                 i2c_smbus_read_byte_data(&the_tps->client,
 752                                 TPS_LED1_ON + offs));
 753
 754         pr_debug("%s: led%i_per  0x%02x\n", DRIVER_NAME, led,
 755                 i2c_smbus_read_byte_data(&the_tps->client,
 756                                 TPS_LED1_PER + offs));
 757
 758         switch (mode) {
 759         case OFF:
 760                 led_on  = 1 << 7;
 761                 led_per = 0 << 7;
 762                 break;
 763         case ON:
 764                 led_on  = 1 << 7;
 765                 led_per = 1 << 7;
 766                 break;
 767         case BLINK:
 768                 led_on  = 0x30 | (0 << 7);
 769                 led_per = 0x08 | (1 << 7);
 770                 break;
 771         default:
 772                 printk(KERN_ERR "%s: Wrong mode parameter for set_led()\n",
 773                        DRIVER_NAME);
 774                 up(&the_tps->lock);
 775                 return -EINVAL;
 776         }
 777
 778         status = i2c_smbus_write_byte_data(&the_tps->client,
 779                         TPS_LED1_ON + offs, led_on);
 780
 781         if (status != 0) {
 782                 printk(KERN_ERR "%s: Failed to write led%i_on register\n",
 783                        DRIVER_NAME, led);
 784                 up(&the_tps->lock);
 785                 return status;
 786         }
 787
 788         pr_debug("%s: led%i_on   0x%02x\n", DRIVER_NAME, led,
 789                 i2c_smbus_read_byte_data(&the_tps->client, TPS_LED1_ON + offs));
 790
 791         status = i2c_smbus_write_byte_data(&the_tps->client,
 792                         TPS_LED1_PER + offs, led_per);
 793
 794         if (status != 0) {
 795                 printk(KERN_ERR "%s: Failed to write led%i_per register\n",
 796                        DRIVER_NAME, led);
 797                 up(&the_tps->lock);
 798                 return status;
 799         }
 800
 801         pr_debug("%s: led%i_per  0x%02x\n", DRIVER_NAME, led,
 802                 i2c_smbus_read_byte_data(&the_tps->client,
 803                                 TPS_LED1_PER + offs));
 804
 805         up(&the_tps->lock);
 806
 807         return status;
 808 }
 809 EXPORT_SYMBOL(tps65010_set_led);
 810
 811 /*-------------------------------------------------------------------------*/
 812 /* tps65010_set_vib parameter:
 813  * value: ON or OFF
 814  */
 815 int tps65010_set_vib(unsigned value)
 816 {
 817         int      status;
 818         unsigned vdcdc2;
 819
 820         if (!the_tps)
 821                 return -ENODEV;
 822
 823         down(&the_tps->lock);
 824
 825         vdcdc2 = i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC2);
 826         vdcdc2 &= ~(1 << 1);
 827         if (value)
 828                 vdcdc2 |= (1 << 1);
 829         status = i2c_smbus_write_byte_data(&the_tps->client,
 830                 TPS_VDCDC2, vdcdc2);
 831
 832         pr_debug("%s: vibrator %s\n", DRIVER_NAME, value ? "on" : "off");
 833
 834         up(&the_tps->lock);
 835         return status;
 836 }
 837 EXPORT_SYMBOL(tps65010_set_vib);
 838
 839 /*-------------------------------------------------------------------------*/
 840 /* tps65010_set_low_pwr parameter:
 841  * mode: ON or OFF
 842  */
 843 int tps65010_set_low_pwr(unsigned mode)
 844 {
 845         int      status;
 846         unsigned vdcdc1;
 847
 848         if (!the_tps)
 849                 return -ENODEV;
 850
 851         down(&the_tps->lock);
 852
 853         pr_debug("%s: %s low_pwr, vdcdc1 0x%02x\n", DRIVER_NAME,
 854                 mode ? "enable" : "disable",
 855                 i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1));
 856
 857         vdcdc1 = i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1);
 858
 859         switch (mode) {
 860         case OFF:
 861                 vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */
 862                 break;
 863         /* case ON: */
 864         default:
 865                 vdcdc1 |= TPS_ENABLE_LP;  /* enable ENABLE_LP bit */
 866                 break;
 867         }
 868
 869         status = i2c_smbus_write_byte_data(&the_tps->client,
 870                         TPS_VDCDC1, vdcdc1);
 871
 872         if (status != 0)
 873                 printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
 874                         DRIVER_NAME);
 875         else
 876                 pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
 877                         i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1));
 878
 879         up(&the_tps->lock);
 880
 881         return status;
 882 }
 883 EXPORT_SYMBOL(tps65010_set_low_pwr);
 884
 885 /*-------------------------------------------------------------------------*/
 886 /* tps65010_config_vregs1 parameter:
 887  * value to be written to VREGS1 register
 888  * Note: The complete register is written, set all bits you need
 889  */
 890 int tps65010_config_vregs1(unsigned value)
 891 {
 892         int      status;
 893
 894         if (!the_tps)
 895                 return -ENODEV;
 896
 897         down(&the_tps->lock);
 898
 899         pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
 900                         i2c_smbus_read_byte_data(&the_tps->client, TPS_VREGS1));
 901
 902         status = i2c_smbus_write_byte_data(&the_tps->client,
 903                         TPS_VREGS1, value);
 904
 905         if (status != 0)
 906                 printk(KERN_ERR "%s: Failed to write vregs1 register\n",
 907                         DRIVER_NAME);
 908         else
 909                 pr_debug("%s: vregs1 0x%02x\n", DRIVER_NAME,
 910                         i2c_smbus_read_byte_data(&the_tps->client, TPS_VREGS1));
 911
 912         up(&the_tps->lock);
 913
 914         return status;
 915 }
 916 EXPORT_SYMBOL(tps65010_config_vregs1);
 917
 918 /*-------------------------------------------------------------------------*/
 919 /* tps65013_set_low_pwr parameter:
 920  * mode: ON or OFF
 921  */
 922
 923 /* FIXME: Assumes AC or USB power is present. Setting AUA bit is not
 924         required if power supply is through a battery */
 925
 926 int tps65013_set_low_pwr(unsigned mode)
 927 {
 928         int      status;
 929         unsigned vdcdc1, chgconfig;
 930
 931         if (!the_tps || the_tps->por)
 932                 return -ENODEV;
 933
 934         down(&the_tps->lock);
 935
 936         pr_debug("%s: %s low_pwr, chgconfig 0x%02x vdcdc1 0x%02x\n",
 937                 DRIVER_NAME,
 938                 mode ? "enable" : "disable",
 939                 i2c_smbus_read_byte_data(&the_tps->client, TPS_CHGCONFIG),
 940                 i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1));
 941
 942         chgconfig = i2c_smbus_read_byte_data(&the_tps->client, TPS_CHGCONFIG);
 943         vdcdc1 = i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1);
 944
 945         switch (mode) {
 946         case OFF:
 947                 chgconfig &= ~TPS65013_AUA; /* disable AUA bit */
 948                 vdcdc1 &= ~TPS_ENABLE_LP; /* disable ENABLE_LP bit */
 949                 break;
 950         /* case ON: */
 951         default:
 952                 chgconfig |= TPS65013_AUA;  /* enable AUA bit */
 953                 vdcdc1 |= TPS_ENABLE_LP;  /* enable ENABLE_LP bit */
 954                 break;
 955         }
 956
 957         status = i2c_smbus_write_byte_data(&the_tps->client,
 958                         TPS_CHGCONFIG, chgconfig);
 959         if (status != 0) {
 960                 printk(KERN_ERR "%s: Failed to write chconfig register\n",
 961          DRIVER_NAME);
 962                 up(&the_tps->lock);
 963                 return status;
 964         }
 965
 966         chgconfig = i2c_smbus_read_byte_data(&the_tps->client, TPS_CHGCONFIG);
 967         the_tps->chgconf = chgconfig;
 968         show_chgconfig(0, "chgconf", chgconfig);
 969
 970         status = i2c_smbus_write_byte_data(&the_tps->client,
 971                         TPS_VDCDC1, vdcdc1);
 972
 973         if (status != 0)
 974                 printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
 975          DRIVER_NAME);
 976         else
 977                 pr_debug("%s: vdcdc1 0x%02x\n", DRIVER_NAME,
 978                         i2c_smbus_read_byte_data(&the_tps->client, TPS_VDCDC1));
 979
 980         up(&the_tps->lock);
 981
 982         return status;
 983 }
 984 EXPORT_SYMBOL(tps65013_set_low_pwr);
 985
 986 /*-------------------------------------------------------------------------*/
 987
 988 static int __init tps_init(void)
 989 {
 990         u32     tries = 3;
 991         int     status = -ENODEV;
 992
 993         printk(KERN_INFO "%s: version %s\n", DRIVER_NAME, DRIVER_VERSION);
 994
 995         /* some boards have startup glitches */
 996         while (tries--) {
 997                 status = i2c_add_driver(&tps65010_driver);
 998                 if (the_tps)
 999                         break;
1000                 i2c_del_driver(&tps65010_driver);
1001                 if (!tries) {
1002                         printk(KERN_ERR "%s: no chip?\n", DRIVER_NAME);
1003                         return -ENODEV;
1004                 }
1005                 pr_debug("%s: re-probe ...\n", DRIVER_NAME);
1006                 msleep(10);
1007         }
1008
1009 #ifdef  CONFIG_ARM
1010         if (machine_is_omap_osk()) {
1011
1012                 // FIXME: More should be placed in the initialization code
1013                 //        of the submodules (DSP, ethernet, power management,
1014                 //        board-osk.c). Careful: I2C is initialized "late".
1015
1016                 /* Let LED1 (D9) blink */
1017                 tps65010_set_led(LED1, BLINK);
1018
1019                 /* Disable LED 2 (D2) */
1020                 tps65010_set_led(LED2, OFF);
1021
1022                 /* Set GPIO 1 HIGH to disable VBUS power supply;
1023                  * OHCI driver powers it up/down as needed.
1024                  */
1025                 tps65010_set_gpio_out_value(GPIO1, HIGH);
1026
1027                 /* Set GPIO 2 low to turn on LED D3 */
1028                 tps65010_set_gpio_out_value(GPIO2, HIGH);
1029
1030                 /* Set GPIO 3 low to take ethernet out of reset */
1031                 tps65010_set_gpio_out_value(GPIO3, LOW);
1032
1033                 /* gpio4 for VDD_DSP */
1034
1035                 /* Enable LOW_PWR */
1036                 tps65010_set_low_pwr(ON);
1037
1038                 /* Switch VLDO2 to 3.0V for AIC23 */
1039                 tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V | TPS_LDO1_ENABLE);
1040
1041         } else if (machine_is_omap_h2()) {
1042                 /* gpio3 for SD, gpio4 for VDD_DSP */
1043
1044                 /* Enable LOW_PWR */
1045                 tps65010_set_low_pwr(ON);
1046         } else if (machine_is_omap_h3()) {
1047                 /* gpio4 for SD, gpio3 for VDD_DSP */
1048 #ifdef CONFIG_PM
1049                 /* Enable LOW_PWR */
1050                 tps65013_set_low_pwr(ON);
1051 #endif
1052         }
1053 #endif
1054
1055         return status;
1056 }
1057 /* NOTE:  this MUST be initialized before the other parts of the system
1058  * that rely on it ... but after the i2c bus on which this relies.
1059  * That is, much earlier than on PC-type systems, which don't often use
1060  * I2C as a core system bus.
1061  */
1062 subsys_initcall(tps_init);
1063
1064 static void __exit tps_exit(void)
1065 {
1066         i2c_del_driver(&tps65010_driver);
1067 }
1068 module_exit(tps_exit);
1069