perf tools: Dont use openat()
[pandora-kernel.git] / drivers / i2c / chips / pcf8574.c
1 /*
2     Copyright (c) 2000  Frodo Looijaard <frodol@dds.nl>, 
3                         Philip Edelbrock <phil@netroedge.com>,
4                         Dan Eaton <dan.eaton@rocketlogix.com>
5     Ported to Linux 2.6 by Aurelien Jarno <aurel32@debian.org> with 
6     the help of Jean Delvare <khali@linux-fr.org>
7
8     This program is free software; you can redistribute it and/or modify
9     it under the terms of the GNU General Public License as published by
10     the Free Software Foundation; either version 2 of the License, or
11     (at your option) any later version.
12     
13     This program is distributed in the hope that it will be useful,
14     but WITHOUT ANY WARRANTY; without even the implied warranty of
15     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16     GNU General Public License for more details.
17
18     You should have received a copy of the GNU General Public License
19     along with this program; if not, write to the Free Software
20     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22
23 /* A few notes about the PCF8574:
24
25 * The PCF8574 is an 8-bit I/O expander for the I2C bus produced by
26   Philips Semiconductors.  It is designed to provide a byte I2C
27   interface to up to 8 separate devices.
28   
29 * The PCF8574 appears as a very simple SMBus device which can be
30   read from or written to with SMBUS byte read/write accesses.
31
32   --Dan
33
34 */
35
36 #include <linux/module.h>
37 #include <linux/init.h>
38 #include <linux/slab.h>
39 #include <linux/i2c.h>
40
41 /* Addresses to scan: none, device can't be detected */
42 static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
43
44 /* Insmod parameters */
45 I2C_CLIENT_INSMOD_2(pcf8574, pcf8574a);
46
47 /* Each client has this additional data */
48 struct pcf8574_data {
49         int write;                      /* Remember last written value */
50 };
51
52 static void pcf8574_init_client(struct i2c_client *client);
53
54 /* following are the sysfs callback functions */
55 static ssize_t show_read(struct device *dev, struct device_attribute *attr, char *buf)
56 {
57         struct i2c_client *client = to_i2c_client(dev);
58         return sprintf(buf, "%u\n", i2c_smbus_read_byte(client));
59 }
60
61 static DEVICE_ATTR(read, S_IRUGO, show_read, NULL);
62
63 static ssize_t show_write(struct device *dev, struct device_attribute *attr, char *buf)
64 {
65         struct pcf8574_data *data = i2c_get_clientdata(to_i2c_client(dev));
66
67         if (data->write < 0)
68                 return data->write;
69
70         return sprintf(buf, "%d\n", data->write);
71 }
72
73 static ssize_t set_write(struct device *dev, struct device_attribute *attr, const char *buf,
74                          size_t count)
75 {
76         struct i2c_client *client = to_i2c_client(dev);
77         struct pcf8574_data *data = i2c_get_clientdata(client);
78         unsigned long val = simple_strtoul(buf, NULL, 10);
79
80         if (val > 0xff)
81                 return -EINVAL;
82
83         data->write = val;
84         i2c_smbus_write_byte(client, data->write);
85         return count;
86 }
87
88 static DEVICE_ATTR(write, S_IWUSR | S_IRUGO, show_write, set_write);
89
90 static struct attribute *pcf8574_attributes[] = {
91         &dev_attr_read.attr,
92         &dev_attr_write.attr,
93         NULL
94 };
95
96 static const struct attribute_group pcf8574_attr_group = {
97         .attrs = pcf8574_attributes,
98 };
99
100 /*
101  * Real code
102  */
103
104 /* Return 0 if detection is successful, -ENODEV otherwise */
105 static int pcf8574_detect(struct i2c_client *client, int kind,
106                           struct i2c_board_info *info)
107 {
108         struct i2c_adapter *adapter = client->adapter;
109         const char *client_name;
110
111         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
112                 return -ENODEV;
113
114         /* Now, we would do the remaining detection. But the PCF8574 is plainly
115            impossible to detect! Stupid chip. */
116
117         /* Determine the chip type */
118         if (kind <= 0) {
119                 if (client->addr >= 0x38 && client->addr <= 0x3f)
120                         kind = pcf8574a;
121                 else
122                         kind = pcf8574;
123         }
124
125         if (kind == pcf8574a)
126                 client_name = "pcf8574a";
127         else
128                 client_name = "pcf8574";
129         strlcpy(info->type, client_name, I2C_NAME_SIZE);
130
131         return 0;
132 }
133
134 static int pcf8574_probe(struct i2c_client *client,
135                          const struct i2c_device_id *id)
136 {
137         struct pcf8574_data *data;
138         int err;
139
140         data = kzalloc(sizeof(struct pcf8574_data), GFP_KERNEL);
141         if (!data) {
142                 err = -ENOMEM;
143                 goto exit;
144         }
145
146         i2c_set_clientdata(client, data);
147
148         /* Initialize the PCF8574 chip */
149         pcf8574_init_client(client);
150
151         /* Register sysfs hooks */
152         err = sysfs_create_group(&client->dev.kobj, &pcf8574_attr_group);
153         if (err)
154                 goto exit_free;
155         return 0;
156
157       exit_free:
158         kfree(data);
159       exit:
160         return err;
161 }
162
163 static int pcf8574_remove(struct i2c_client *client)
164 {
165         sysfs_remove_group(&client->dev.kobj, &pcf8574_attr_group);
166         kfree(i2c_get_clientdata(client));
167         return 0;
168 }
169
170 /* Called when we have found a new PCF8574. */
171 static void pcf8574_init_client(struct i2c_client *client)
172 {
173         struct pcf8574_data *data = i2c_get_clientdata(client);
174         data->write = -EAGAIN;
175 }
176
177 static const struct i2c_device_id pcf8574_id[] = {
178         { "pcf8574", 0 },
179         { "pcf8574a", 0 },
180         { }
181 };
182
183 static struct i2c_driver pcf8574_driver = {
184         .driver = {
185                 .name   = "pcf8574",
186         },
187         .probe          = pcf8574_probe,
188         .remove         = pcf8574_remove,
189         .id_table       = pcf8574_id,
190
191         .detect         = pcf8574_detect,
192         .address_data   = &addr_data,
193 };
194
195 static int __init pcf8574_init(void)
196 {
197         return i2c_add_driver(&pcf8574_driver);
198 }
199
200 static void __exit pcf8574_exit(void)
201 {
202         i2c_del_driver(&pcf8574_driver);
203 }
204
205
206 MODULE_AUTHOR
207     ("Frodo Looijaard <frodol@dds.nl>, "
208      "Philip Edelbrock <phil@netroedge.com>, "
209      "Dan Eaton <dan.eaton@rocketlogix.com> "
210      "and Aurelien Jarno <aurelien@aurel32.net>");
211 MODULE_DESCRIPTION("PCF8574 driver");
212 MODULE_LICENSE("GPL");
213
214 module_init(pcf8574_init);
215 module_exit(pcf8574_exit);