drivers/hwmon/smsc47m1.c

   1 /*
   2     smsc47m1.c - Part of lm_sensors, Linux kernel modules
   3                  for hardware monitoring
   4
   5     Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x,
   6     LPC47M15x, LPC47M192 and LPC47M997 Super-I/O chips.
   7
   8     Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
   9     Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
  10     Ported to Linux 2.6 by Gabriele Gorla <gorlik@yahoo.com>
  11                         and Jean Delvare
  12
  13     This program is free software; you can redistribute it and/or modify
  14     it under the terms of the GNU General Public License as published by
  15     the Free Software Foundation; either version 2 of the License, or
  16     (at your option) any later version.
  17
  18     This program is distributed in the hope that it will be useful,
  19     but WITHOUT ANY WARRANTY; without even the implied warranty of
  20     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21     GNU General Public License for more details.
  22
  23     You should have received a copy of the GNU General Public License
  24     along with this program; if not, write to the Free Software
  25     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  26 */
  27
  28 #include <linux/module.h>
  29 #include <linux/slab.h>
  30 #include <linux/ioport.h>
  31 #include <linux/jiffies.h>
  32 #include <linux/i2c.h>
  33 #include <linux/i2c-isa.h>
  34 #include <linux/hwmon.h>
  35 #include <linux/err.h>
  36 #include <linux/init.h>
  37 #include <asm/io.h>
  38
  39 /* Address is autodetected, there is no default value */
  40 static unsigned short address;
  41
  42 /* Super-I/0 registers and commands */
  43
  44 #define REG     0x2e    /* The register to read/write */
  45 #define VAL     0x2f    /* The value to read/write */
  46
  47 static inline void
  48 superio_outb(int reg, int val)
  49 {
  50         outb(reg, REG);
  51         outb(val, VAL);
  52 }
  53
  54 static inline int
  55 superio_inb(int reg)
  56 {
  57         outb(reg, REG);
  58         return inb(VAL);
  59 }
  60
  61 /* logical device for fans is 0x0A */
  62 #define superio_select() superio_outb(0x07, 0x0A)
  63
  64 static inline void
  65 superio_enter(void)
  66 {
  67         outb(0x55, REG);
  68 }
  69
  70 static inline void
  71 superio_exit(void)
  72 {
  73         outb(0xAA, REG);
  74 }
  75
  76 #define SUPERIO_REG_ACT         0x30
  77 #define SUPERIO_REG_BASE        0x60
  78 #define SUPERIO_REG_DEVID       0x20
  79
  80 /* Logical device registers */
  81
  82 #define SMSC_EXTENT             0x80
  83
  84 /* nr is 0 or 1 in the macros below */
  85 #define SMSC47M1_REG_ALARM              0x04
  86 #define SMSC47M1_REG_TPIN(nr)           (0x34 - (nr))
  87 #define SMSC47M1_REG_PPIN(nr)           (0x36 - (nr))
  88 #define SMSC47M1_REG_PWM(nr)            (0x56 + (nr))
  89 #define SMSC47M1_REG_FANDIV             0x58
  90 #define SMSC47M1_REG_FAN(nr)            (0x59 + (nr))
  91 #define SMSC47M1_REG_FAN_PRELOAD(nr)    (0x5B + (nr))
  92
  93 #define MIN_FROM_REG(reg,div)           ((reg)>=192 ? 0 : \
  94                                          983040/((192-(reg))*(div)))
  95 #define FAN_FROM_REG(reg,div,preload)   ((reg)<=(preload) || (reg)==255 ? 0 : \
  96                                          983040/(((reg)-(preload))*(div)))
  97 #define DIV_FROM_REG(reg)               (1 << (reg))
  98 #define PWM_FROM_REG(reg)               (((reg) & 0x7E) << 1)
  99 #define PWM_EN_FROM_REG(reg)            ((~(reg)) & 0x01)
 100 #define PWM_TO_REG(reg)                 (((reg) >> 1) & 0x7E)
 101
 102 struct smsc47m1_data {
 103         struct i2c_client client;
 104         struct class_device *class_dev;
 105         struct semaphore lock;
 106
 107         struct semaphore update_lock;
 108         unsigned long last_updated;     /* In jiffies */
 109
 110         u8 fan[2];              /* Register value */
 111         u8 fan_preload[2];      /* Register value */
 112         u8 fan_div[2];          /* Register encoding, shifted right */
 113         u8 alarms;              /* Register encoding */
 114         u8 pwm[2];              /* Register value (bit 7 is enable) */
 115 };
 116
 117
 118 static int smsc47m1_detect(struct i2c_adapter *adapter);
 119 static int smsc47m1_detach_client(struct i2c_client *client);
 120
 121 static int smsc47m1_read_value(struct i2c_client *client, u8 reg);
 122 static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value);
 123
 124 static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
 125                 int init);
 126
 127
 128 static struct i2c_driver smsc47m1_driver = {
 129         .driver = {
 130                 .name   = "smsc47m1",
 131         },
 132         .attach_adapter = smsc47m1_detect,
 133         .detach_client  = smsc47m1_detach_client,
 134 };
 135
 136 /* nr is 0 or 1 in the callback functions below */
 137
 138 static ssize_t get_fan(struct device *dev, char *buf, int nr)
 139 {
 140         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 141         /* This chip (stupidly) stops monitoring fan speed if PWM is
 142            enabled and duty cycle is 0%. This is fine if the monitoring
 143            and control concern the same fan, but troublesome if they are
 144            not (which could as well happen). */
 145         int rpm = (data->pwm[nr] & 0x7F) == 0x00 ? 0 :
 146                   FAN_FROM_REG(data->fan[nr],
 147                                DIV_FROM_REG(data->fan_div[nr]),
 148                                data->fan_preload[nr]);
 149         return sprintf(buf, "%d\n", rpm);
 150 }
 151
 152 static ssize_t get_fan_min(struct device *dev, char *buf, int nr)
 153 {
 154         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 155         int rpm = MIN_FROM_REG(data->fan_preload[nr],
 156                                DIV_FROM_REG(data->fan_div[nr]));
 157         return sprintf(buf, "%d\n", rpm);
 158 }
 159
 160 static ssize_t get_fan_div(struct device *dev, char *buf, int nr)
 161 {
 162         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 163         return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
 164 }
 165
 166 static ssize_t get_pwm(struct device *dev, char *buf, int nr)
 167 {
 168         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 169         return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
 170 }
 171
 172 static ssize_t get_pwm_en(struct device *dev, char *buf, int nr)
 173 {
 174         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 175         return sprintf(buf, "%d\n", PWM_EN_FROM_REG(data->pwm[nr]));
 176 }
 177
 178 static ssize_t get_alarms(struct device *dev, struct device_attribute *attr, char *buf)
 179 {
 180         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 181         return sprintf(buf, "%d\n", data->alarms);
 182 }
 183
 184 static ssize_t set_fan_min(struct device *dev, const char *buf,
 185                 size_t count, int nr)
 186 {
 187         struct i2c_client *client = to_i2c_client(dev);
 188         struct smsc47m1_data *data = i2c_get_clientdata(client);
 189         long rpmdiv, val = simple_strtol(buf, NULL, 10);
 190
 191         down(&data->update_lock);
 192         rpmdiv = val * DIV_FROM_REG(data->fan_div[nr]);
 193
 194         if (983040 > 192 * rpmdiv || 2 * rpmdiv > 983040) {
 195                 up(&data->update_lock);
 196                 return -EINVAL;
 197         }
 198
 199         data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv);
 200         smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
 201                              data->fan_preload[nr]);
 202         up(&data->update_lock);
 203
 204         return count;
 205 }
 206
 207 /* Note: we save and restore the fan minimum here, because its value is
 208    determined in part by the fan clock divider.  This follows the principle
 209    of least suprise; the user doesn't expect the fan minimum to change just
 210    because the divider changed. */
 211 static ssize_t set_fan_div(struct device *dev, const char *buf,
 212                 size_t count, int nr)
 213 {
 214         struct i2c_client *client = to_i2c_client(dev);
 215         struct smsc47m1_data *data = i2c_get_clientdata(client);
 216
 217         long new_div = simple_strtol(buf, NULL, 10), tmp;
 218         u8 old_div = DIV_FROM_REG(data->fan_div[nr]);
 219
 220         if (new_div == old_div) /* No change */
 221                 return count;
 222
 223         down(&data->update_lock);
 224         switch (new_div) {
 225         case 1: data->fan_div[nr] = 0; break;
 226         case 2: data->fan_div[nr] = 1; break;
 227         case 4: data->fan_div[nr] = 2; break;
 228         case 8: data->fan_div[nr] = 3; break;
 229         default:
 230                 up(&data->update_lock);
 231                 return -EINVAL;
 232         }
 233
 234         tmp = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV) & 0x0F;
 235         tmp |= (data->fan_div[0] << 4) | (data->fan_div[1] << 6);
 236         smsc47m1_write_value(client, SMSC47M1_REG_FANDIV, tmp);
 237
 238         /* Preserve fan min */
 239         tmp = 192 - (old_div * (192 - data->fan_preload[nr])
 240                      + new_div / 2) / new_div;
 241         data->fan_preload[nr] = SENSORS_LIMIT(tmp, 0, 191);
 242         smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
 243                              data->fan_preload[nr]);
 244         up(&data->update_lock);
 245
 246         return count;
 247 }
 248
 249 static ssize_t set_pwm(struct device *dev, const char *buf,
 250                 size_t count, int nr)
 251 {
 252         struct i2c_client *client = to_i2c_client(dev);
 253         struct smsc47m1_data *data = i2c_get_clientdata(client);
 254
 255         long val = simple_strtol(buf, NULL, 10);
 256
 257         if (val < 0 || val > 255)
 258                 return -EINVAL;
 259
 260         down(&data->update_lock);
 261         data->pwm[nr] &= 0x81; /* Preserve additional bits */
 262         data->pwm[nr] |= PWM_TO_REG(val);
 263         smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
 264                              data->pwm[nr]);
 265         up(&data->update_lock);
 266
 267         return count;
 268 }
 269
 270 static ssize_t set_pwm_en(struct device *dev, const char *buf,
 271                 size_t count, int nr)
 272 {
 273         struct i2c_client *client = to_i2c_client(dev);
 274         struct smsc47m1_data *data = i2c_get_clientdata(client);
 275
 276         long val = simple_strtol(buf, NULL, 10);
 277
 278         if (val != 0 && val != 1)
 279                 return -EINVAL;
 280
 281         down(&data->update_lock);
 282         data->pwm[nr] &= 0xFE; /* preserve the other bits */
 283         data->pwm[nr] |= !val;
 284         smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
 285                              data->pwm[nr]);
 286         up(&data->update_lock);
 287
 288         return count;
 289 }
 290
 291 #define fan_present(offset)                                             \
 292 static ssize_t get_fan##offset (struct device *dev, struct device_attribute *attr, char *buf)           \
 293 {                                                                       \
 294         return get_fan(dev, buf, offset - 1);                           \
 295 }                                                                       \
 296 static ssize_t get_fan##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)     \
 297 {                                                                       \
 298         return get_fan_min(dev, buf, offset - 1);                       \
 299 }                                                                       \
 300 static ssize_t set_fan##offset##_min (struct device *dev, struct device_attribute *attr,                \
 301                 const char *buf, size_t count)                          \
 302 {                                                                       \
 303         return set_fan_min(dev, buf, count, offset - 1);                \
 304 }                                                                       \
 305 static ssize_t get_fan##offset##_div (struct device *dev, struct device_attribute *attr, char *buf)     \
 306 {                                                                       \
 307         return get_fan_div(dev, buf, offset - 1);                       \
 308 }                                                                       \
 309 static ssize_t set_fan##offset##_div (struct device *dev, struct device_attribute *attr,                \
 310                 const char *buf, size_t count)                          \
 311 {                                                                       \
 312         return set_fan_div(dev, buf, count, offset - 1);                \
 313 }                                                                       \
 314 static ssize_t get_pwm##offset (struct device *dev, struct device_attribute *attr, char *buf)           \
 315 {                                                                       \
 316         return get_pwm(dev, buf, offset - 1);                           \
 317 }                                                                       \
 318 static ssize_t set_pwm##offset (struct device *dev, struct device_attribute *attr,                      \
 319                 const char *buf, size_t count)                          \
 320 {                                                                       \
 321         return set_pwm(dev, buf, count, offset - 1);                    \
 322 }                                                                       \
 323 static ssize_t get_pwm##offset##_en (struct device *dev, struct device_attribute *attr, char *buf)      \
 324 {                                                                       \
 325         return get_pwm_en(dev, buf, offset - 1);                        \
 326 }                                                                       \
 327 static ssize_t set_pwm##offset##_en (struct device *dev, struct device_attribute *attr,         \
 328                 const char *buf, size_t count)                          \
 329 {                                                                       \
 330         return set_pwm_en(dev, buf, count, offset - 1);                 \
 331 }                                                                       \
 332 static DEVICE_ATTR(fan##offset##_input, S_IRUGO, get_fan##offset,       \
 333                 NULL);                                                  \
 334 static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,                \
 335                 get_fan##offset##_min, set_fan##offset##_min);          \
 336 static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR,                \
 337                 get_fan##offset##_div, set_fan##offset##_div);          \
 338 static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR,                      \
 339                 get_pwm##offset, set_pwm##offset);                      \
 340 static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR,             \
 341                 get_pwm##offset##_en, set_pwm##offset##_en);
 342
 343 fan_present(1);
 344 fan_present(2);
 345
 346 static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL);
 347
 348 static int __init smsc47m1_find(unsigned short *addr)
 349 {
 350         u8 val;
 351
 352         superio_enter();
 353         val = superio_inb(SUPERIO_REG_DEVID);
 354
 355         /*
 356          * SMSC LPC47M10x/LPC47M13x (device id 0x59), LPC47M14x (device id
 357          * 0x5F) and LPC47B27x (device id 0x51) have fan control.
 358          * The LPC47M15x and LPC47M192 chips "with hardware monitoring block"
 359          * can do much more besides (device id 0x60).
 360          * The LPC47M997 is undocumented, but seems to be compatible with
 361          * the LPC47M192, and has the same device id.
 362          */
 363         if (val == 0x51)
 364                 printk(KERN_INFO "smsc47m1: Found SMSC LPC47B27x\n");
 365         else if (val == 0x59)
 366                 printk(KERN_INFO "smsc47m1: Found SMSC LPC47M10x/LPC47M13x\n");
 367         else if (val == 0x5F)
 368                 printk(KERN_INFO "smsc47m1: Found SMSC LPC47M14x\n");
 369         else if (val == 0x60)
 370                 printk(KERN_INFO "smsc47m1: Found SMSC "
 371                        "LPC47M15x/LPC47M192/LPC47M997\n");
 372         else {
 373                 superio_exit();
 374                 return -ENODEV;
 375         }
 376
 377         superio_select();
 378         *addr = (superio_inb(SUPERIO_REG_BASE) << 8)
 379               |  superio_inb(SUPERIO_REG_BASE + 1);
 380         val = superio_inb(SUPERIO_REG_ACT);
 381         if (*addr == 0 || (val & 0x01) == 0) {
 382                 printk(KERN_INFO "smsc47m1: Device is disabled, will not use\n");
 383                 superio_exit();
 384                 return -ENODEV;
 385         }
 386
 387         superio_exit();
 388         return 0;
 389 }
 390
 391 static int smsc47m1_detect(struct i2c_adapter *adapter)
 392 {
 393         struct i2c_client *new_client;
 394         struct smsc47m1_data *data;
 395         int err = 0;
 396         int fan1, fan2, pwm1, pwm2;
 397
 398         if (!request_region(address, SMSC_EXTENT, smsc47m1_driver.driver.name)) {
 399                 dev_err(&adapter->dev, "Region 0x%x already in use!\n", address);
 400                 return -EBUSY;
 401         }
 402
 403         if (!(data = kzalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) {
 404                 err = -ENOMEM;
 405                 goto error_release;
 406         }
 407
 408         new_client = &data->client;
 409         i2c_set_clientdata(new_client, data);
 410         new_client->addr = address;
 411         init_MUTEX(&data->lock);
 412         new_client->adapter = adapter;
 413         new_client->driver = &smsc47m1_driver;
 414         new_client->flags = 0;
 415
 416         strlcpy(new_client->name, "smsc47m1", I2C_NAME_SIZE);
 417         init_MUTEX(&data->update_lock);
 418
 419         /* If no function is properly configured, there's no point in
 420            actually registering the chip. */
 421         fan1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(0)) & 0x05)
 422                == 0x05;
 423         fan2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(1)) & 0x05)
 424                == 0x05;
 425         pwm1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(0)) & 0x05)
 426                == 0x04;
 427         pwm2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(1)) & 0x05)
 428                == 0x04;
 429         if (!(fan1 || fan2 || pwm1 || pwm2)) {
 430                 dev_warn(&new_client->dev, "Device is not configured, will not use\n");
 431                 err = -ENODEV;
 432                 goto error_free;
 433         }
 434
 435         if ((err = i2c_attach_client(new_client)))
 436                 goto error_free;
 437
 438         /* Some values (fan min, clock dividers, pwm registers) may be
 439            needed before any update is triggered, so we better read them
 440            at least once here. We don't usually do it that way, but in
 441            this particular case, manually reading 5 registers out of 8
 442            doesn't make much sense and we're better using the existing
 443            function. */
 444         smsc47m1_update_device(&new_client->dev, 1);
 445
 446         /* Register sysfs hooks */
 447         data->class_dev = hwmon_device_register(&new_client->dev);
 448         if (IS_ERR(data->class_dev)) {
 449                 err = PTR_ERR(data->class_dev);
 450                 goto error_detach;
 451         }
 452
 453         if (fan1) {
 454                 device_create_file(&new_client->dev, &dev_attr_fan1_input);
 455                 device_create_file(&new_client->dev, &dev_attr_fan1_min);
 456                 device_create_file(&new_client->dev, &dev_attr_fan1_div);
 457         } else
 458                 dev_dbg(&new_client->dev, "Fan 1 not enabled by hardware, "
 459                         "skipping\n");
 460
 461         if (fan2) {
 462                 device_create_file(&new_client->dev, &dev_attr_fan2_input);
 463                 device_create_file(&new_client->dev, &dev_attr_fan2_min);
 464                 device_create_file(&new_client->dev, &dev_attr_fan2_div);
 465         } else
 466                 dev_dbg(&new_client->dev, "Fan 2 not enabled by hardware, "
 467                         "skipping\n");
 468
 469         if (pwm1) {
 470                 device_create_file(&new_client->dev, &dev_attr_pwm1);
 471                 device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
 472         } else
 473                 dev_dbg(&new_client->dev, "PWM 1 not enabled by hardware, "
 474                         "skipping\n");
 475         if (pwm2) {
 476                 device_create_file(&new_client->dev, &dev_attr_pwm2);
 477                 device_create_file(&new_client->dev, &dev_attr_pwm2_enable);
 478         } else
 479                 dev_dbg(&new_client->dev, "PWM 2 not enabled by hardware, "
 480                         "skipping\n");
 481
 482         device_create_file(&new_client->dev, &dev_attr_alarms);
 483
 484         return 0;
 485
 486 error_detach:
 487         i2c_detach_client(new_client);
 488 error_free:
 489         kfree(data);
 490 error_release:
 491         release_region(address, SMSC_EXTENT);
 492         return err;
 493 }
 494
 495 static int smsc47m1_detach_client(struct i2c_client *client)
 496 {
 497         struct smsc47m1_data *data = i2c_get_clientdata(client);
 498         int err;
 499
 500         hwmon_device_unregister(data->class_dev);
 501
 502         if ((err = i2c_detach_client(client)))
 503                 return err;
 504
 505         release_region(client->addr, SMSC_EXTENT);
 506         kfree(data);
 507
 508         return 0;
 509 }
 510
 511 static int smsc47m1_read_value(struct i2c_client *client, u8 reg)
 512 {
 513         int res;
 514
 515         down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 516         res = inb_p(client->addr + reg);
 517         up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 518         return res;
 519 }
 520
 521 static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value)
 522 {
 523         down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 524         outb_p(value, client->addr + reg);
 525         up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 526 }
 527
 528 static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
 529                 int init)
 530 {
 531         struct i2c_client *client = to_i2c_client(dev);
 532         struct smsc47m1_data *data = i2c_get_clientdata(client);
 533
 534         down(&data->update_lock);
 535
 536         if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) {
 537                 int i;
 538
 539                 for (i = 0; i < 2; i++) {
 540                         data->fan[i] = smsc47m1_read_value(client,
 541                                        SMSC47M1_REG_FAN(i));
 542                         data->fan_preload[i] = smsc47m1_read_value(client,
 543                                                SMSC47M1_REG_FAN_PRELOAD(i));
 544                         data->pwm[i] = smsc47m1_read_value(client,
 545                                        SMSC47M1_REG_PWM(i));
 546                 }
 547
 548                 i = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV);
 549                 data->fan_div[0] = (i >> 4) & 0x03;
 550                 data->fan_div[1] = i >> 6;
 551
 552                 data->alarms = smsc47m1_read_value(client,
 553                                SMSC47M1_REG_ALARM) >> 6;
 554                 /* Clear alarms if needed */
 555                 if (data->alarms)
 556                         smsc47m1_write_value(client, SMSC47M1_REG_ALARM, 0xC0);
 557
 558                 data->last_updated = jiffies;
 559         }
 560
 561         up(&data->update_lock);
 562         return data;
 563 }
 564
 565 static int __init sm_smsc47m1_init(void)
 566 {
 567         if (smsc47m1_find(&address)) {
 568                 return -ENODEV;
 569         }
 570
 571         return i2c_isa_add_driver(&smsc47m1_driver);
 572 }
 573
 574 static void __exit sm_smsc47m1_exit(void)
 575 {
 576         i2c_isa_del_driver(&smsc47m1_driver);
 577 }
 578
 579 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
 580 MODULE_DESCRIPTION("SMSC LPC47M1xx fan sensors driver");
 581 MODULE_LICENSE("GPL");
 582
 583 module_init(sm_smsc47m1_init);
 584 module_exit(sm_smsc47m1_exit);