Merge branch 'xen/dev-evtchn' into upstream/evtchn
[pandora-kernel.git] / drivers / hwmon / ds1621.c
1 /*
2     ds1621.c - Part of lm_sensors, Linux kernel modules for hardware
3              monitoring
4     Christian W. Zuckschwerdt  <zany@triq.net>  2000-11-23
5     based on lm75.c by Frodo Looijaard <frodol@dds.nl>
6     Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with 
7     the help of Jean Delvare <khali@linux-fr.org>
8
9     This program is free software; you can redistribute it and/or modify
10     it under the terms of the GNU General Public License as published by
11     the Free Software Foundation; either version 2 of the License, or
12     (at your option) any later version.
13
14     This program is distributed in the hope that it will be useful,
15     but WITHOUT ANY WARRANTY; without even the implied warranty of
16     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17     GNU General Public License for more details.
18
19     You should have received a copy of the GNU General Public License
20     along with this program; if not, write to the Free Software
21     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 */
23
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/slab.h>
27 #include <linux/jiffies.h>
28 #include <linux/i2c.h>
29 #include <linux/hwmon.h>
30 #include <linux/hwmon-sysfs.h>
31 #include <linux/err.h>
32 #include <linux/mutex.h>
33 #include <linux/sysfs.h>
34 #include "lm75.h"
35
36 /* Addresses to scan */
37 static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
38                                         0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
39
40 /* Insmod parameters */
41 static int polarity = -1;
42 module_param(polarity, int, 0);
43 MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low");
44
45 /* Many DS1621 constants specified below */
46 /* Config register used for detection         */
47 /*  7    6    5    4    3    2    1    0      */
48 /* |Done|THF |TLF |NVB | X  | X  |POL |1SHOT| */
49 #define DS1621_REG_CONFIG_NVB           0x10
50 #define DS1621_REG_CONFIG_POLARITY      0x02
51 #define DS1621_REG_CONFIG_1SHOT         0x01
52 #define DS1621_REG_CONFIG_DONE          0x80
53
54 /* The DS1621 registers */
55 static const u8 DS1621_REG_TEMP[3] = {
56         0xAA,           /* input, word, RO */
57         0xA2,           /* min, word, RW */
58         0xA1,           /* max, word, RW */
59 };
60 #define DS1621_REG_CONF                 0xAC /* byte, RW */
61 #define DS1621_COM_START                0xEE /* no data */
62 #define DS1621_COM_STOP                 0x22 /* no data */
63
64 /* The DS1621 configuration register */
65 #define DS1621_ALARM_TEMP_HIGH          0x40
66 #define DS1621_ALARM_TEMP_LOW           0x20
67
68 /* Conversions */
69 #define ALARMS_FROM_REG(val) ((val) & \
70                               (DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW))
71
72 /* Each client has this additional data */
73 struct ds1621_data {
74         struct device *hwmon_dev;
75         struct mutex update_lock;
76         char valid;                     /* !=0 if following fields are valid */
77         unsigned long last_updated;     /* In jiffies */
78
79         u16 temp[3];                    /* Register values, word */
80         u8 conf;                        /* Register encoding, combined */
81 };
82
83 /* Temperature registers are word-sized.
84    DS1621 uses a high-byte first convention, which is exactly opposite to
85    the SMBus standard. */
86 static int ds1621_read_temp(struct i2c_client *client, u8 reg)
87 {
88         int ret;
89
90         ret = i2c_smbus_read_word_data(client, reg);
91         if (ret < 0)
92                 return ret;
93         return swab16(ret);
94 }
95
96 static int ds1621_write_temp(struct i2c_client *client, u8 reg, u16 value)
97 {
98         return i2c_smbus_write_word_data(client, reg, swab16(value));
99 }
100
101 static void ds1621_init_client(struct i2c_client *client)
102 {
103         u8 conf, new_conf;
104
105         new_conf = conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
106         /* switch to continuous conversion mode */
107         new_conf &= ~DS1621_REG_CONFIG_1SHOT;
108
109         /* setup output polarity */
110         if (polarity == 0)
111                 new_conf &= ~DS1621_REG_CONFIG_POLARITY;
112         else if (polarity == 1)
113                 new_conf |= DS1621_REG_CONFIG_POLARITY;
114         
115         if (conf != new_conf)
116                 i2c_smbus_write_byte_data(client, DS1621_REG_CONF, new_conf);
117         
118         /* start conversion */
119         i2c_smbus_write_byte(client, DS1621_COM_START);
120 }
121
122 static struct ds1621_data *ds1621_update_client(struct device *dev)
123 {
124         struct i2c_client *client = to_i2c_client(dev);
125         struct ds1621_data *data = i2c_get_clientdata(client);
126         u8 new_conf;
127
128         mutex_lock(&data->update_lock);
129
130         if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
131             || !data->valid) {
132                 int i;
133
134                 dev_dbg(&client->dev, "Starting ds1621 update\n");
135
136                 data->conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
137
138                 for (i = 0; i < ARRAY_SIZE(data->temp); i++)
139                         data->temp[i] = ds1621_read_temp(client,
140                                                          DS1621_REG_TEMP[i]);
141
142                 /* reset alarms if necessary */
143                 new_conf = data->conf;
144                 if (data->temp[0] > data->temp[1])      /* input > min */
145                         new_conf &= ~DS1621_ALARM_TEMP_LOW;
146                 if (data->temp[0] < data->temp[2])      /* input < max */
147                         new_conf &= ~DS1621_ALARM_TEMP_HIGH;
148                 if (data->conf != new_conf)
149                         i2c_smbus_write_byte_data(client, DS1621_REG_CONF,
150                                                   new_conf);
151
152                 data->last_updated = jiffies;
153                 data->valid = 1;
154         }
155
156         mutex_unlock(&data->update_lock);
157
158         return data;
159 }
160
161 static ssize_t show_temp(struct device *dev, struct device_attribute *da,
162                          char *buf)
163 {
164         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
165         struct ds1621_data *data = ds1621_update_client(dev);
166         return sprintf(buf, "%d\n",
167                        LM75_TEMP_FROM_REG(data->temp[attr->index]));
168 }
169
170 static ssize_t set_temp(struct device *dev, struct device_attribute *da,
171                         const char *buf, size_t count)
172 {
173         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
174         struct i2c_client *client = to_i2c_client(dev);
175         struct ds1621_data *data = i2c_get_clientdata(client);
176         u16 val = LM75_TEMP_TO_REG(simple_strtol(buf, NULL, 10));
177
178         mutex_lock(&data->update_lock);
179         data->temp[attr->index] = val;
180         ds1621_write_temp(client, DS1621_REG_TEMP[attr->index],
181                           data->temp[attr->index]);
182         mutex_unlock(&data->update_lock);
183         return count;
184 }
185
186 static ssize_t show_alarms(struct device *dev, struct device_attribute *da,
187                            char *buf)
188 {
189         struct ds1621_data *data = ds1621_update_client(dev);
190         return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->conf));
191 }
192
193 static ssize_t show_alarm(struct device *dev, struct device_attribute *da,
194                           char *buf)
195 {
196         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
197         struct ds1621_data *data = ds1621_update_client(dev);
198         return sprintf(buf, "%d\n", !!(data->conf & attr->index));
199 }
200
201 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
202 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
203 static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp, set_temp, 1);
204 static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp, set_temp, 2);
205 static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL,
206                 DS1621_ALARM_TEMP_LOW);
207 static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL,
208                 DS1621_ALARM_TEMP_HIGH);
209
210 static struct attribute *ds1621_attributes[] = {
211         &sensor_dev_attr_temp1_input.dev_attr.attr,
212         &sensor_dev_attr_temp1_min.dev_attr.attr,
213         &sensor_dev_attr_temp1_max.dev_attr.attr,
214         &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
215         &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
216         &dev_attr_alarms.attr,
217         NULL
218 };
219
220 static const struct attribute_group ds1621_group = {
221         .attrs = ds1621_attributes,
222 };
223
224
225 /* Return 0 if detection is successful, -ENODEV otherwise */
226 static int ds1621_detect(struct i2c_client *client,
227                          struct i2c_board_info *info)
228 {
229         struct i2c_adapter *adapter = client->adapter;
230         int conf, temp;
231         int i;
232
233         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA 
234                                      | I2C_FUNC_SMBUS_WORD_DATA 
235                                      | I2C_FUNC_SMBUS_WRITE_BYTE))
236                 return -ENODEV;
237
238         /* Now, we do the remaining detection. It is lousy. */
239         /* The NVB bit should be low if no EEPROM write has been  requested
240            during the latest 10ms, which is highly improbable in our case. */
241         conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
242         if (conf < 0 || conf & DS1621_REG_CONFIG_NVB)
243                 return -ENODEV;
244         /* The 7 lowest bits of a temperature should always be 0. */
245         for (i = 0; i < ARRAY_SIZE(DS1621_REG_TEMP); i++) {
246                 temp = i2c_smbus_read_word_data(client, DS1621_REG_TEMP[i]);
247                 if (temp < 0 || (temp & 0x7f00))
248                         return -ENODEV;
249         }
250
251         strlcpy(info->type, "ds1621", I2C_NAME_SIZE);
252
253         return 0;
254 }
255
256 static int ds1621_probe(struct i2c_client *client,
257                         const struct i2c_device_id *id)
258 {
259         struct ds1621_data *data;
260         int err;
261
262         data = kzalloc(sizeof(struct ds1621_data), GFP_KERNEL);
263         if (!data) {
264                 err = -ENOMEM;
265                 goto exit;
266         }
267
268         i2c_set_clientdata(client, data);
269         mutex_init(&data->update_lock);
270
271         /* Initialize the DS1621 chip */
272         ds1621_init_client(client);
273
274         /* Register sysfs hooks */
275         if ((err = sysfs_create_group(&client->dev.kobj, &ds1621_group)))
276                 goto exit_free;
277
278         data->hwmon_dev = hwmon_device_register(&client->dev);
279         if (IS_ERR(data->hwmon_dev)) {
280                 err = PTR_ERR(data->hwmon_dev);
281                 goto exit_remove_files;
282         }
283
284         return 0;
285
286       exit_remove_files:
287         sysfs_remove_group(&client->dev.kobj, &ds1621_group);
288       exit_free:
289         kfree(data);
290       exit:
291         return err;
292 }
293
294 static int ds1621_remove(struct i2c_client *client)
295 {
296         struct ds1621_data *data = i2c_get_clientdata(client);
297
298         hwmon_device_unregister(data->hwmon_dev);
299         sysfs_remove_group(&client->dev.kobj, &ds1621_group);
300
301         kfree(data);
302
303         return 0;
304 }
305
306 static const struct i2c_device_id ds1621_id[] = {
307         { "ds1621", 0 },
308         { "ds1625", 0 },
309         { }
310 };
311 MODULE_DEVICE_TABLE(i2c, ds1621_id);
312
313 /* This is the driver that will be inserted */
314 static struct i2c_driver ds1621_driver = {
315         .class          = I2C_CLASS_HWMON,
316         .driver = {
317                 .name   = "ds1621",
318         },
319         .probe          = ds1621_probe,
320         .remove         = ds1621_remove,
321         .id_table       = ds1621_id,
322         .detect         = ds1621_detect,
323         .address_list   = normal_i2c,
324 };
325
326 static int __init ds1621_init(void)
327 {
328         return i2c_add_driver(&ds1621_driver);
329 }
330
331 static void __exit ds1621_exit(void)
332 {
333         i2c_del_driver(&ds1621_driver);
334 }
335
336
337 MODULE_AUTHOR("Christian W. Zuckschwerdt <zany@triq.net>");
338 MODULE_DESCRIPTION("DS1621 driver");
339 MODULE_LICENSE("GPL");
340
341 module_init(ds1621_init);
342 module_exit(ds1621_exit);