drivers/hid/hid-wacom.c

   1 /*
   2  *  Bluetooth Wacom Tablet support
   3  *
   4  *  Copyright (c) 1999 Andreas Gal
   5  *  Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
   6  *  Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
   7  *  Copyright (c) 2006-2007 Jiri Kosina
   8  *  Copyright (c) 2007 Paul Walmsley
   9  *  Copyright (c) 2008 Jiri Slaby <jirislaby@gmail.com>
  10  *  Copyright (c) 2006 Andrew Zabolotny <zap@homelink.ru>
  11  *  Copyright (c) 2009 Bastien Nocera <hadess@hadess.net>
  12  */
  13
  14 /*
  15  * This program is free software; you can redistribute it and/or modify it
  16  * under the terms of the GNU General Public License as published by the Free
  17  * Software Foundation; either version 2 of the License, or (at your option)
  18  * any later version.
  19  */
  20
  21 #include <linux/device.h>
  22 #include <linux/hid.h>
  23 #include <linux/module.h>
  24 #include <linux/slab.h>
  25 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
  26 #include <linux/power_supply.h>
  27 #endif
  28
  29 #include "hid-ids.h"
  30
  31 struct wacom_data {
  32         __u16 tool;
  33         unsigned char butstate;
  34         unsigned char high_speed;
  35 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
  36         int battery_capacity;
  37         struct power_supply battery;
  38         struct power_supply ac;
  39 #endif
  40 };
  41
  42 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
  43 /*percent of battery capacity, 0 means AC online*/
  44 static unsigned short batcap[8] = { 1, 15, 25, 35, 50, 70, 100, 0 };
  45
  46 static enum power_supply_property wacom_battery_props[] = {
  47         POWER_SUPPLY_PROP_PRESENT,
  48         POWER_SUPPLY_PROP_CAPACITY
  49 };
  50
  51 static enum power_supply_property wacom_ac_props[] = {
  52         POWER_SUPPLY_PROP_PRESENT,
  53         POWER_SUPPLY_PROP_ONLINE
  54 };
  55
  56 static int wacom_battery_get_property(struct power_supply *psy,
  57                                 enum power_supply_property psp,
  58                                 union power_supply_propval *val)
  59 {
  60         struct wacom_data *wdata = container_of(psy,
  61                                         struct wacom_data, battery);
  62         int power_state = batcap[wdata->battery_capacity];
  63         int ret = 0;
  64
  65         switch (psp) {
  66         case POWER_SUPPLY_PROP_PRESENT:
  67                 val->intval = 1;
  68                 break;
  69         case POWER_SUPPLY_PROP_CAPACITY:
  70                 /* show 100% battery capacity when charging */
  71                 if (power_state == 0)
  72                         val->intval = 100;
  73                 else
  74                         val->intval = power_state;
  75                 break;
  76         default:
  77                 ret = -EINVAL;
  78                 break;
  79         }
  80         return ret;
  81 }
  82
  83 static int wacom_ac_get_property(struct power_supply *psy,
  84                                 enum power_supply_property psp,
  85                                 union power_supply_propval *val)
  86 {
  87         struct wacom_data *wdata = container_of(psy, struct wacom_data, ac);
  88         int power_state = batcap[wdata->battery_capacity];
  89         int ret = 0;
  90
  91         switch (psp) {
  92         case POWER_SUPPLY_PROP_PRESENT:
  93                 /* fall through */
  94         case POWER_SUPPLY_PROP_ONLINE:
  95                 if (power_state == 0)
  96                         val->intval = 1;
  97                 else
  98                         val->intval = 0;
  99                 break;
 100         default:
 101                 ret = -EINVAL;
 102                 break;
 103         }
 104         return ret;
 105 }
 106 #endif
 107
 108 static void wacom_poke(struct hid_device *hdev, u8 speed)
 109 {
 110         struct wacom_data *wdata = hid_get_drvdata(hdev);
 111         int limit, ret;
 112         char rep_data[2];
 113
 114         rep_data[0] = 0x03 ; rep_data[1] = 0x00;
 115         limit = 3;
 116         do {
 117                 ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
 118                                 HID_FEATURE_REPORT);
 119         } while (ret < 0 && limit-- > 0);
 120
 121         if (ret >= 0) {
 122                 if (speed == 0)
 123                         rep_data[0] = 0x05;
 124                 else
 125                         rep_data[0] = 0x06;
 126
 127                 rep_data[1] = 0x00;
 128                 limit = 3;
 129                 do {
 130                         ret = hdev->hid_output_raw_report(hdev, rep_data, 2,
 131                                         HID_FEATURE_REPORT);
 132                 } while (ret < 0 && limit-- > 0);
 133
 134                 if (ret >= 0) {
 135                         wdata->high_speed = speed;
 136                         return;
 137                 }
 138         }
 139
 140         /*
 141          * Note that if the raw queries fail, it's not a hard failure and it
 142          * is safe to continue
 143          */
 144         dev_warn(&hdev->dev, "failed to poke device, command %d, err %d\n",
 145                                 rep_data[0], ret);
 146         return;
 147 }
 148
 149 static ssize_t wacom_show_speed(struct device *dev,
 150                                 struct device_attribute
 151                                 *attr, char *buf)
 152 {
 153         struct wacom_data *wdata = dev_get_drvdata(dev);
 154
 155         return snprintf(buf, PAGE_SIZE, "%i\n", wdata->high_speed);
 156 }
 157
 158 static ssize_t wacom_store_speed(struct device *dev,
 159                                 struct device_attribute *attr,
 160                                 const char *buf, size_t count)
 161 {
 162         struct hid_device *hdev = container_of(dev, struct hid_device, dev);
 163         int new_speed;
 164
 165         if (sscanf(buf, "%1d", &new_speed ) != 1)
 166                 return -EINVAL;
 167
 168         if (new_speed == 0 || new_speed == 1) {
 169                 wacom_poke(hdev, new_speed);
 170                 return strnlen(buf, PAGE_SIZE);
 171         } else
 172                 return -EINVAL;
 173 }
 174
 175 static DEVICE_ATTR(speed, S_IRUGO | S_IWUGO,
 176                 wacom_show_speed, wacom_store_speed);
 177
 178 static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
 179                 u8 *raw_data, int size)
 180 {
 181         struct wacom_data *wdata = hid_get_drvdata(hdev);
 182         struct hid_input *hidinput;
 183         struct input_dev *input;
 184         unsigned char *data = (unsigned char *) raw_data;
 185         int tool, x, y, rw;
 186
 187         if (!(hdev->claimed & HID_CLAIMED_INPUT))
 188                 return 0;
 189
 190         tool = 0;
 191         hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
 192         input = hidinput->input;
 193
 194         /* Check if this is a tablet report */
 195         if (data[0] != 0x03)
 196                 return 0;
 197
 198         /* Get X & Y positions */
 199         x = le16_to_cpu(*(__le16 *) &data[2]);
 200         y = le16_to_cpu(*(__le16 *) &data[4]);
 201
 202         /* Get current tool identifier */
 203         if (data[1] & 0x90) { /* If pen is in the in/active area */
 204                 switch ((data[1] >> 5) & 3) {
 205                 case 0: /* Pen */
 206                         tool = BTN_TOOL_PEN;
 207                         break;
 208
 209                 case 1: /* Rubber */
 210                         tool = BTN_TOOL_RUBBER;
 211                         break;
 212
 213                 case 2: /* Mouse with wheel */
 214                 case 3: /* Mouse without wheel */
 215                         tool = BTN_TOOL_MOUSE;
 216                         break;
 217                 }
 218
 219                 /* Reset tool if out of active tablet area */
 220                 if (!(data[1] & 0x10))
 221                         tool = 0;
 222         }
 223
 224         /* If tool changed, notify input subsystem */
 225         if (wdata->tool != tool) {
 226                 if (wdata->tool) {
 227                         /* Completely reset old tool state */
 228                         if (wdata->tool == BTN_TOOL_MOUSE) {
 229                                 input_report_key(input, BTN_LEFT, 0);
 230                                 input_report_key(input, BTN_RIGHT, 0);
 231                                 input_report_key(input, BTN_MIDDLE, 0);
 232                                 input_report_abs(input, ABS_DISTANCE,
 233                                                 input->absmax[ABS_DISTANCE]);
 234                         } else {
 235                                 input_report_key(input, BTN_TOUCH, 0);
 236                                 input_report_key(input, BTN_STYLUS, 0);
 237                                 input_report_key(input, BTN_STYLUS2, 0);
 238                                 input_report_abs(input, ABS_PRESSURE, 0);
 239                         }
 240                         input_report_key(input, wdata->tool, 0);
 241                         input_sync(input);
 242                 }
 243                 wdata->tool = tool;
 244                 if (tool)
 245                         input_report_key(input, tool, 1);
 246         }
 247
 248         if (tool) {
 249                 input_report_abs(input, ABS_X, x);
 250                 input_report_abs(input, ABS_Y, y);
 251
 252                 switch ((data[1] >> 5) & 3) {
 253                 case 2: /* Mouse with wheel */
 254                         input_report_key(input, BTN_MIDDLE, data[1] & 0x04);
 255                         rw = (data[6] & 0x01) ? -1 :
 256                                 (data[6] & 0x02) ? 1 : 0;
 257                         input_report_rel(input, REL_WHEEL, rw);
 258                         /* fall through */
 259
 260                 case 3: /* Mouse without wheel */
 261                         input_report_key(input, BTN_LEFT, data[1] & 0x01);
 262                         input_report_key(input, BTN_RIGHT, data[1] & 0x02);
 263                         /* Compute distance between mouse and tablet */
 264                         rw = 44 - (data[6] >> 2);
 265                         if (rw < 0)
 266                                 rw = 0;
 267                         else if (rw > 31)
 268                                 rw = 31;
 269                         input_report_abs(input, ABS_DISTANCE, rw);
 270                         break;
 271
 272                 default:
 273                         input_report_abs(input, ABS_PRESSURE,
 274                                         data[6] | (((__u16) (data[1] & 0x08)) << 5));
 275                         input_report_key(input, BTN_TOUCH, data[1] & 0x01);
 276                         input_report_key(input, BTN_STYLUS, data[1] & 0x02);
 277                         input_report_key(input, BTN_STYLUS2, (tool == BTN_TOOL_PEN) && data[1] & 0x04);
 278                         break;
 279                 }
 280
 281                 input_sync(input);
 282         }
 283
 284         /* Report the state of the two buttons at the top of the tablet
 285          * as two extra fingerpad keys (buttons 4 & 5). */
 286         rw = data[7] & 0x03;
 287         if (rw != wdata->butstate) {
 288                 wdata->butstate = rw;
 289                 input_report_key(input, BTN_0, rw & 0x02);
 290                 input_report_key(input, BTN_1, rw & 0x01);
 291                 input_report_key(input, BTN_TOOL_FINGER, 0xf0);
 292                 input_event(input, EV_MSC, MSC_SERIAL, 0xf0);
 293                 input_sync(input);
 294         }
 295
 296 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 297         /* Store current battery capacity */
 298         rw = (data[7] >> 2 & 0x07);
 299         if (rw != wdata->battery_capacity)
 300                 wdata->battery_capacity = rw;
 301 #endif
 302         return 1;
 303 }
 304
 305 static int wacom_probe(struct hid_device *hdev,
 306                 const struct hid_device_id *id)
 307 {
 308         struct hid_input *hidinput;
 309         struct input_dev *input;
 310         struct wacom_data *wdata;
 311         int ret;
 312
 313         wdata = kzalloc(sizeof(*wdata), GFP_KERNEL);
 314         if (wdata == NULL) {
 315                 dev_err(&hdev->dev, "can't alloc wacom descriptor\n");
 316                 return -ENOMEM;
 317         }
 318
 319         hid_set_drvdata(hdev, wdata);
 320
 321         /* Parse the HID report now */
 322         ret = hid_parse(hdev);
 323         if (ret) {
 324                 dev_err(&hdev->dev, "parse failed\n");
 325                 goto err_free;
 326         }
 327
 328         ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
 329         if (ret) {
 330                 dev_err(&hdev->dev, "hw start failed\n");
 331                 goto err_free;
 332         }
 333
 334         ret = device_create_file(&hdev->dev, &dev_attr_speed);
 335         if (ret)
 336                 dev_warn(&hdev->dev,
 337                         "can't create sysfs speed attribute err: %d\n", ret);
 338
 339         /* Set Wacom mode 2 with high reporting speed */
 340         wacom_poke(hdev, 1);
 341
 342 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 343         wdata->battery.properties = wacom_battery_props;
 344         wdata->battery.num_properties = ARRAY_SIZE(wacom_battery_props);
 345         wdata->battery.get_property = wacom_battery_get_property;
 346         wdata->battery.name = "wacom_battery";
 347         wdata->battery.type = POWER_SUPPLY_TYPE_BATTERY;
 348         wdata->battery.use_for_apm = 0;
 349
 350         ret = power_supply_register(&hdev->dev, &wdata->battery);
 351         if (ret) {
 352                 dev_warn(&hdev->dev,
 353                         "can't create sysfs battery attribute, err: %d\n", ret);
 354                 /*
 355                  * battery attribute is not critical for the tablet, but if it
 356                  * failed then there is no need to create ac attribute
 357                  */
 358                 goto move_on;
 359         }
 360
 361         wdata->ac.properties = wacom_ac_props;
 362         wdata->ac.num_properties = ARRAY_SIZE(wacom_ac_props);
 363         wdata->ac.get_property = wacom_ac_get_property;
 364         wdata->ac.name = "wacom_ac";
 365         wdata->ac.type = POWER_SUPPLY_TYPE_MAINS;
 366         wdata->ac.use_for_apm = 0;
 367
 368         ret = power_supply_register(&hdev->dev, &wdata->ac);
 369         if (ret) {
 370                 dev_warn(&hdev->dev,
 371                         "can't create ac battery attribute, err: %d\n", ret);
 372                 /*
 373                  * ac attribute is not critical for the tablet, but if it
 374                  * failed then we don't want to battery attribute to exist
 375                  */
 376                 power_supply_unregister(&wdata->battery);
 377         }
 378
 379 move_on:
 380 #endif
 381         hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
 382         input = hidinput->input;
 383
 384         /* Basics */
 385         input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL);
 386         input->absbit[0] |= BIT(ABS_X) | BIT(ABS_Y) |
 387                 BIT(ABS_PRESSURE) | BIT(ABS_DISTANCE);
 388         input->relbit[0] |= BIT(REL_WHEEL);
 389         set_bit(BTN_TOOL_PEN, input->keybit);
 390         set_bit(BTN_TOUCH, input->keybit);
 391         set_bit(BTN_STYLUS, input->keybit);
 392         set_bit(BTN_STYLUS2, input->keybit);
 393         set_bit(BTN_LEFT, input->keybit);
 394         set_bit(BTN_RIGHT, input->keybit);
 395         set_bit(BTN_MIDDLE, input->keybit);
 396
 397         /* Pad */
 398         input->evbit[0] |= BIT(EV_MSC);
 399         input->mscbit[0] |= BIT(MSC_SERIAL);
 400         set_bit(BTN_0, input->keybit);
 401         set_bit(BTN_1, input->keybit);
 402         set_bit(BTN_TOOL_FINGER, input->keybit);
 403
 404         /* Distance, rubber and mouse */
 405         input->absbit[0] |= BIT(ABS_DISTANCE);
 406         set_bit(BTN_TOOL_RUBBER, input->keybit);
 407         set_bit(BTN_TOOL_MOUSE, input->keybit);
 408
 409         input->absmax[ABS_PRESSURE] = 511;
 410         input->absmax[ABS_DISTANCE] = 32;
 411
 412         input->absmax[ABS_X] = 16704;
 413         input->absmax[ABS_Y] = 12064;
 414         input->absfuzz[ABS_X] = 4;
 415         input->absfuzz[ABS_Y] = 4;
 416
 417         return 0;
 418 err_free:
 419         kfree(wdata);
 420         return ret;
 421 }
 422
 423 static void wacom_remove(struct hid_device *hdev)
 424 {
 425 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 426         struct wacom_data *wdata = hid_get_drvdata(hdev);
 427 #endif
 428         hid_hw_stop(hdev);
 429
 430 #ifdef CONFIG_HID_WACOM_POWER_SUPPLY
 431         power_supply_unregister(&wdata->battery);
 432         power_supply_unregister(&wdata->ac);
 433 #endif
 434         kfree(hid_get_drvdata(hdev));
 435 }
 436
 437 static const struct hid_device_id wacom_devices[] = {
 438         { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) },
 439         { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) },
 440         { }
 441 };
 442 MODULE_DEVICE_TABLE(hid, wacom_devices);
 443
 444 static struct hid_driver wacom_driver = {
 445         .name = "wacom",
 446         .id_table = wacom_devices,
 447         .probe = wacom_probe,
 448         .remove = wacom_remove,
 449         .raw_event = wacom_raw_event,
 450 };
 451
 452 static int __init wacom_init(void)
 453 {
 454         int ret;
 455
 456         ret = hid_register_driver(&wacom_driver);
 457         if (ret)
 458                 printk(KERN_ERR "can't register wacom driver\n");
 459         return ret;
 460 }
 461
 462 static void __exit wacom_exit(void)
 463 {
 464         hid_unregister_driver(&wacom_driver);
 465 }
 466
 467 module_init(wacom_init);
 468 module_exit(wacom_exit);
 469 MODULE_LICENSE("GPL");
 470