drivers/gpu/drm/via/via_dmablit.c

   1 /* via_dmablit.c -- PCI DMA BitBlt support for the VIA Unichrome/Pro
   2  *
   3  * Copyright (C) 2005 Thomas Hellstrom, All Rights Reserved.
   4  *
   5  * Permission is hereby granted, free of charge, to any person obtaining a
   6  * copy of this software and associated documentation files (the "Software"),
   7  * to deal in the Software without restriction, including without limitation
   8  * the rights to use, copy, modify, merge, publish, distribute, sub license,
   9  * and/or sell copies of the Software, and to permit persons to whom the
  10  * Software is furnished to do so, subject to the following conditions:
  11  *
  12  * The above copyright notice and this permission notice (including the
  13  * next paragraph) shall be included in all copies or substantial portions
  14  * of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
  19  * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
  20  * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
  21  * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
  22  * USE OR OTHER DEALINGS IN THE SOFTWARE.
  23  *
  24  * Authors:
  25  *    Thomas Hellstrom.
  26  *    Partially based on code obtained from Digeo Inc.
  27  */
  28
  29
  30 /*
  31  * Unmaps the DMA mappings.
  32  * FIXME: Is this a NoOp on x86? Also
  33  * FIXME: What happens if this one is called and a pending blit has previously done
  34  * the same DMA mappings?
  35  */
  36
  37 #include "drmP.h"
  38 #include "via_drm.h"
  39 #include "via_drv.h"
  40 #include "via_dmablit.h"
  41
  42 #include <linux/pagemap.h>
  43
  44 #define VIA_PGDN(x)          (((unsigned long)(x)) & PAGE_MASK)
  45 #define VIA_PGOFF(x)        (((unsigned long)(x)) & ~PAGE_MASK)
  46 #define VIA_PFN(x)            ((unsigned long)(x) >> PAGE_SHIFT)
  47
  48 typedef struct _drm_via_descriptor {
  49         uint32_t mem_addr;
  50         uint32_t dev_addr;
  51         uint32_t size;
  52         uint32_t next;
  53 } drm_via_descriptor_t;
  54
  55
  56 /*
  57  * Unmap a DMA mapping.
  58  */
  59
  60
  61
  62 static void
  63 via_unmap_blit_from_device(struct pci_dev *pdev, drm_via_sg_info_t *vsg)
  64 {
  65         int num_desc = vsg->num_desc;
  66         unsigned cur_descriptor_page = num_desc / vsg->descriptors_per_page;
  67         unsigned descriptor_this_page = num_desc % vsg->descriptors_per_page;
  68         drm_via_descriptor_t *desc_ptr = vsg->desc_pages[cur_descriptor_page] +
  69                 descriptor_this_page;
  70         dma_addr_t next = vsg->chain_start;
  71
  72         while(num_desc--) {
  73                 if (descriptor_this_page-- == 0) {
  74                         cur_descriptor_page--;
  75                         descriptor_this_page = vsg->descriptors_per_page - 1;
  76                         desc_ptr = vsg->desc_pages[cur_descriptor_page] +
  77                                 descriptor_this_page;
  78                 }
  79                 dma_unmap_single(&pdev->dev, next, sizeof(*desc_ptr), DMA_TO_DEVICE);
  80                 dma_unmap_page(&pdev->dev, desc_ptr->mem_addr, desc_ptr->size, vsg->direction);
  81                 next = (dma_addr_t) desc_ptr->next;
  82                 desc_ptr--;
  83         }
  84 }
  85
  86 /*
  87  * If mode = 0, count how many descriptors are needed.
  88  * If mode = 1, Map the DMA pages for the device, put together and map also the descriptors.
  89  * Descriptors are run in reverse order by the hardware because we are not allowed to update the
  90  * 'next' field without syncing calls when the descriptor is already mapped.
  91  */
  92
  93 static void
  94 via_map_blit_for_device(struct pci_dev *pdev,
  95                    const drm_via_dmablit_t *xfer,
  96                    drm_via_sg_info_t *vsg,
  97                    int mode)
  98 {
  99         unsigned cur_descriptor_page = 0;
 100         unsigned num_descriptors_this_page = 0;
 101         unsigned char *mem_addr = xfer->mem_addr;
 102         unsigned char *cur_mem;
 103         unsigned char *first_addr = (unsigned char *)VIA_PGDN(mem_addr);
 104         uint32_t fb_addr = xfer->fb_addr;
 105         uint32_t cur_fb;
 106         unsigned long line_len;
 107         unsigned remaining_len;
 108         int num_desc = 0;
 109         int cur_line;
 110         dma_addr_t next = 0 | VIA_DMA_DPR_EC;
 111         drm_via_descriptor_t *desc_ptr = NULL;
 112
 113         if (mode == 1)
 114                 desc_ptr = vsg->desc_pages[cur_descriptor_page];
 115
 116         for (cur_line = 0; cur_line < xfer->num_lines; ++cur_line) {
 117
 118                 line_len = xfer->line_length;
 119                 cur_fb = fb_addr;
 120                 cur_mem = mem_addr;
 121
 122                 while (line_len > 0) {
 123
 124                         remaining_len = min(PAGE_SIZE-VIA_PGOFF(cur_mem), line_len);
 125                         line_len -= remaining_len;
 126
 127                         if (mode == 1) {
 128                                 desc_ptr->mem_addr =
 129                                         dma_map_page(&pdev->dev,
 130                                                      vsg->pages[VIA_PFN(cur_mem) -
 131                                                                 VIA_PFN(first_addr)],
 132                                                      VIA_PGOFF(cur_mem), remaining_len,
 133                                                      vsg->direction);
 134                                 desc_ptr->dev_addr = cur_fb;
 135
 136                                 desc_ptr->size = remaining_len;
 137                                 desc_ptr->next = (uint32_t) next;
 138                                 next = dma_map_single(&pdev->dev, desc_ptr, sizeof(*desc_ptr),
 139                                                       DMA_TO_DEVICE);
 140                                 desc_ptr++;
 141                                 if (++num_descriptors_this_page >= vsg->descriptors_per_page) {
 142                                         num_descriptors_this_page = 0;
 143                                         desc_ptr = vsg->desc_pages[++cur_descriptor_page];
 144                                 }
 145                         }
 146
 147                         num_desc++;
 148                         cur_mem += remaining_len;
 149                         cur_fb += remaining_len;
 150                 }
 151
 152                 mem_addr += xfer->mem_stride;
 153                 fb_addr += xfer->fb_stride;
 154         }
 155
 156         if (mode == 1) {
 157                 vsg->chain_start = next;
 158                 vsg->state = dr_via_device_mapped;
 159         }
 160         vsg->num_desc = num_desc;
 161 }
 162
 163 /*
 164  * Function that frees up all resources for a blit. It is usable even if the
 165  * blit info has only been partially built as long as the status enum is consistent
 166  * with the actual status of the used resources.
 167  */
 168
 169
 170 static void
 171 via_free_sg_info(struct pci_dev *pdev, drm_via_sg_info_t *vsg)
 172 {
 173         struct page *page;
 174         int i;
 175
 176         switch(vsg->state) {
 177         case dr_via_device_mapped:
 178                 via_unmap_blit_from_device(pdev, vsg);
 179         case dr_via_desc_pages_alloc:
 180                 for (i=0; i<vsg->num_desc_pages; ++i) {
 181                         if (vsg->desc_pages[i] != NULL)
 182                           free_page((unsigned long)vsg->desc_pages[i]);
 183                 }
 184                 kfree(vsg->desc_pages);
 185         case dr_via_pages_locked:
 186                 for (i=0; i<vsg->num_pages; ++i) {
 187                         if ( NULL != (page = vsg->pages[i])) {
 188                                 if (! PageReserved(page) && (DMA_FROM_DEVICE == vsg->direction))
 189                                         SetPageDirty(page);
 190                                 page_cache_release(page);
 191                         }
 192                 }
 193         case dr_via_pages_alloc:
 194                 vfree(vsg->pages);
 195         default:
 196                 vsg->state = dr_via_sg_init;
 197         }
 198         vfree(vsg->bounce_buffer);
 199         vsg->bounce_buffer = NULL;
 200         vsg->free_on_sequence = 0;
 201 }
 202
 203 /*
 204  * Fire a blit engine.
 205  */
 206
 207 static void
 208 via_fire_dmablit(struct drm_device *dev, drm_via_sg_info_t *vsg, int engine)
 209 {
 210         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 211
 212         VIA_WRITE(VIA_PCI_DMA_MAR0 + engine*0x10, 0);
 213         VIA_WRITE(VIA_PCI_DMA_DAR0 + engine*0x10, 0);
 214         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DD | VIA_DMA_CSR_TD |
 215                   VIA_DMA_CSR_DE);
 216         VIA_WRITE(VIA_PCI_DMA_MR0  + engine*0x04, VIA_DMA_MR_CM | VIA_DMA_MR_TDIE);
 217         VIA_WRITE(VIA_PCI_DMA_BCR0 + engine*0x10, 0);
 218         VIA_WRITE(VIA_PCI_DMA_DPR0 + engine*0x10, vsg->chain_start);
 219         DRM_WRITEMEMORYBARRIER();
 220         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DE | VIA_DMA_CSR_TS);
 221         VIA_READ(VIA_PCI_DMA_CSR0 + engine*0x04);
 222 }
 223
 224 /*
 225  * Obtain a page pointer array and lock all pages into system memory. A segmentation violation will
 226  * occur here if the calling user does not have access to the submitted address.
 227  */
 228
 229 static int
 230 via_lock_all_dma_pages(drm_via_sg_info_t *vsg,  drm_via_dmablit_t *xfer)
 231 {
 232         int ret;
 233         unsigned long first_pfn = VIA_PFN(xfer->mem_addr);
 234         vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride -1)) -
 235                 first_pfn + 1;
 236
 237         if (NULL == (vsg->pages = vmalloc(sizeof(struct page *) * vsg->num_pages)))
 238                 return -ENOMEM;
 239         memset(vsg->pages, 0, sizeof(struct page *) * vsg->num_pages);
 240         down_read(&current->mm->mmap_sem);
 241         ret = get_user_pages(current, current->mm,
 242                              (unsigned long)xfer->mem_addr,
 243                              vsg->num_pages,
 244                              (vsg->direction == DMA_FROM_DEVICE),
 245                              0, vsg->pages, NULL);
 246
 247         up_read(&current->mm->mmap_sem);
 248         if (ret != vsg->num_pages) {
 249                 if (ret < 0)
 250                         return ret;
 251                 vsg->state = dr_via_pages_locked;
 252                 return -EINVAL;
 253         }
 254         vsg->state = dr_via_pages_locked;
 255         DRM_DEBUG("DMA pages locked\n");
 256         return 0;
 257 }
 258
 259 /*
 260  * Allocate DMA capable memory for the blit descriptor chain, and an array that keeps track of the
 261  * pages we allocate. We don't want to use kmalloc for the descriptor chain because it may be
 262  * quite large for some blits, and pages don't need to be contingous.
 263  */
 264
 265 static int
 266 via_alloc_desc_pages(drm_via_sg_info_t *vsg)
 267 {
 268         int i;
 269
 270         vsg->descriptors_per_page = PAGE_SIZE / sizeof( drm_via_descriptor_t);
 271         vsg->num_desc_pages = (vsg->num_desc + vsg->descriptors_per_page - 1) /
 272                 vsg->descriptors_per_page;
 273
 274         if (NULL ==  (vsg->desc_pages = kcalloc(vsg->num_desc_pages, sizeof(void *), GFP_KERNEL)))
 275                 return -ENOMEM;
 276
 277         vsg->state = dr_via_desc_pages_alloc;
 278         for (i=0; i<vsg->num_desc_pages; ++i) {
 279                 if (NULL == (vsg->desc_pages[i] =
 280                              (drm_via_descriptor_t *) __get_free_page(GFP_KERNEL)))
 281                         return -ENOMEM;
 282         }
 283         DRM_DEBUG("Allocated %d pages for %d descriptors.\n", vsg->num_desc_pages,
 284                   vsg->num_desc);
 285         return 0;
 286 }
 287
 288 static void
 289 via_abort_dmablit(struct drm_device *dev, int engine)
 290 {
 291         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 292
 293         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TA);
 294 }
 295
 296 static void
 297 via_dmablit_engine_off(struct drm_device *dev, int engine)
 298 {
 299         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 300
 301         VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_TD | VIA_DMA_CSR_DD);
 302 }
 303
 304
 305
 306 /*
 307  * The dmablit part of the IRQ handler. Trying to do only reasonably fast things here.
 308  * The rest, like unmapping and freeing memory for done blits is done in a separate workqueue
 309  * task. Basically the task of the interrupt handler is to submit a new blit to the engine, while
 310  * the workqueue task takes care of processing associated with the old blit.
 311  */
 312
 313 void
 314 via_dmablit_handler(struct drm_device *dev, int engine, int from_irq)
 315 {
 316         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 317         drm_via_blitq_t *blitq = dev_priv->blit_queues + engine;
 318         int cur;
 319         int done_transfer;
 320         unsigned long irqsave=0;
 321         uint32_t status = 0;
 322
 323         DRM_DEBUG("DMA blit handler called. engine = %d, from_irq = %d, blitq = 0x%lx\n",
 324                   engine, from_irq, (unsigned long) blitq);
 325
 326         if (from_irq) {
 327                 spin_lock(&blitq->blit_lock);
 328         } else {
 329                 spin_lock_irqsave(&blitq->blit_lock, irqsave);
 330         }
 331
 332         done_transfer = blitq->is_active &&
 333           (( status = VIA_READ(VIA_PCI_DMA_CSR0 + engine*0x04)) & VIA_DMA_CSR_TD);
 334         done_transfer = done_transfer || ( blitq->aborting && !(status & VIA_DMA_CSR_DE));
 335
 336         cur = blitq->cur;
 337         if (done_transfer) {
 338
 339                 blitq->blits[cur]->aborted = blitq->aborting;
 340                 blitq->done_blit_handle++;
 341                 DRM_WAKEUP(blitq->blit_queue + cur);
 342
 343                 cur++;
 344                 if (cur >= VIA_NUM_BLIT_SLOTS)
 345                         cur = 0;
 346                 blitq->cur = cur;
 347
 348                 /*
 349                  * Clear transfer done flag.
 350                  */
 351
 352                 VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04,  VIA_DMA_CSR_TD);
 353
 354                 blitq->is_active = 0;
 355                 blitq->aborting = 0;
 356                 schedule_work(&blitq->wq);
 357
 358         } else if (blitq->is_active && time_after_eq(jiffies, blitq->end)) {
 359
 360                 /*
 361                  * Abort transfer after one second.
 362                  */
 363
 364                 via_abort_dmablit(dev, engine);
 365                 blitq->aborting = 1;
 366                 blitq->end = jiffies + DRM_HZ;
 367         }
 368
 369         if (!blitq->is_active) {
 370                 if (blitq->num_outstanding) {
 371                         via_fire_dmablit(dev, blitq->blits[cur], engine);
 372                         blitq->is_active = 1;
 373                         blitq->cur = cur;
 374                         blitq->num_outstanding--;
 375                         blitq->end = jiffies + DRM_HZ;
 376                         if (!timer_pending(&blitq->poll_timer))
 377                                 mod_timer(&blitq->poll_timer, jiffies + 1);
 378                 } else {
 379                         if (timer_pending(&blitq->poll_timer)) {
 380                                 del_timer(&blitq->poll_timer);
 381                         }
 382                         via_dmablit_engine_off(dev, engine);
 383                 }
 384         }
 385
 386         if (from_irq) {
 387                 spin_unlock(&blitq->blit_lock);
 388         } else {
 389                 spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 390         }
 391 }
 392
 393
 394
 395 /*
 396  * Check whether this blit is still active, performing necessary locking.
 397  */
 398
 399 static int
 400 via_dmablit_active(drm_via_blitq_t *blitq, int engine, uint32_t handle, wait_queue_head_t **queue)
 401 {
 402         unsigned long irqsave;
 403         uint32_t slot;
 404         int active;
 405
 406         spin_lock_irqsave(&blitq->blit_lock, irqsave);
 407
 408         /*
 409          * Allow for handle wraparounds.
 410          */
 411
 412         active = ((blitq->done_blit_handle - handle) > (1 << 23)) &&
 413                 ((blitq->cur_blit_handle - handle) <= (1 << 23));
 414
 415         if (queue && active) {
 416                 slot = handle - blitq->done_blit_handle + blitq->cur -1;
 417                 if (slot >= VIA_NUM_BLIT_SLOTS) {
 418                         slot -= VIA_NUM_BLIT_SLOTS;
 419                 }
 420                 *queue = blitq->blit_queue + slot;
 421         }
 422
 423         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 424
 425         return active;
 426 }
 427
 428 /*
 429  * Sync. Wait for at least three seconds for the blit to be performed.
 430  */
 431
 432 static int
 433 via_dmablit_sync(struct drm_device *dev, uint32_t handle, int engine)
 434 {
 435
 436         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 437         drm_via_blitq_t *blitq = dev_priv->blit_queues + engine;
 438         wait_queue_head_t *queue;
 439         int ret = 0;
 440
 441         if (via_dmablit_active(blitq, engine, handle, &queue)) {
 442                 DRM_WAIT_ON(ret, *queue, 3 * DRM_HZ,
 443                             !via_dmablit_active(blitq, engine, handle, NULL));
 444         }
 445         DRM_DEBUG("DMA blit sync handle 0x%x engine %d returned %d\n",
 446                   handle, engine, ret);
 447
 448         return ret;
 449 }
 450
 451
 452 /*
 453  * A timer that regularly polls the blit engine in cases where we don't have interrupts:
 454  * a) Broken hardware (typically those that don't have any video capture facility).
 455  * b) Blit abort. The hardware doesn't send an interrupt when a blit is aborted.
 456  * The timer and hardware IRQ's can and do work in parallel. If the hardware has
 457  * irqs, it will shorten the latency somewhat.
 458  */
 459
 460
 461
 462 static void
 463 via_dmablit_timer(unsigned long data)
 464 {
 465         drm_via_blitq_t *blitq = (drm_via_blitq_t *) data;
 466         struct drm_device *dev = blitq->dev;
 467         int engine = (int)
 468                 (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues);
 469
 470         DRM_DEBUG("Polling timer called for engine %d, jiffies %lu\n", engine,
 471                   (unsigned long) jiffies);
 472
 473         via_dmablit_handler(dev, engine, 0);
 474
 475         if (!timer_pending(&blitq->poll_timer)) {
 476                 mod_timer(&blitq->poll_timer, jiffies + 1);
 477
 478                /*
 479                 * Rerun handler to delete timer if engines are off, and
 480                 * to shorten abort latency. This is a little nasty.
 481                 */
 482
 483                via_dmablit_handler(dev, engine, 0);
 484
 485         }
 486 }
 487
 488
 489
 490
 491 /*
 492  * Workqueue task that frees data and mappings associated with a blit.
 493  * Also wakes up waiting processes. Each of these tasks handles one
 494  * blit engine only and may not be called on each interrupt.
 495  */
 496
 497
 498 static void
 499 via_dmablit_workqueue(struct work_struct *work)
 500 {
 501         drm_via_blitq_t *blitq = container_of(work, drm_via_blitq_t, wq);
 502         struct drm_device *dev = blitq->dev;
 503         unsigned long irqsave;
 504         drm_via_sg_info_t *cur_sg;
 505         int cur_released;
 506
 507
 508         DRM_DEBUG("Workqueue task called for blit engine %ld\n",(unsigned long)
 509                   (blitq - ((drm_via_private_t *)dev->dev_private)->blit_queues));
 510
 511         spin_lock_irqsave(&blitq->blit_lock, irqsave);
 512
 513         while(blitq->serviced != blitq->cur) {
 514
 515                 cur_released = blitq->serviced++;
 516
 517                 DRM_DEBUG("Releasing blit slot %d\n", cur_released);
 518
 519                 if (blitq->serviced >= VIA_NUM_BLIT_SLOTS)
 520                         blitq->serviced = 0;
 521
 522                 cur_sg = blitq->blits[cur_released];
 523                 blitq->num_free++;
 524
 525                 spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 526
 527                 DRM_WAKEUP(&blitq->busy_queue);
 528
 529                 via_free_sg_info(dev->pdev, cur_sg);
 530                 kfree(cur_sg);
 531
 532                 spin_lock_irqsave(&blitq->blit_lock, irqsave);
 533         }
 534
 535         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 536 }
 537
 538
 539 /*
 540  * Init all blit engines. Currently we use two, but some hardware have 4.
 541  */
 542
 543
 544 void
 545 via_init_dmablit(struct drm_device *dev)
 546 {
 547         int i,j;
 548         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 549         drm_via_blitq_t *blitq;
 550
 551         pci_set_master(dev->pdev);
 552
 553         for (i=0; i< VIA_NUM_BLIT_ENGINES; ++i) {
 554                 blitq = dev_priv->blit_queues + i;
 555                 blitq->dev = dev;
 556                 blitq->cur_blit_handle = 0;
 557                 blitq->done_blit_handle = 0;
 558                 blitq->head = 0;
 559                 blitq->cur = 0;
 560                 blitq->serviced = 0;
 561                 blitq->num_free = VIA_NUM_BLIT_SLOTS - 1;
 562                 blitq->num_outstanding = 0;
 563                 blitq->is_active = 0;
 564                 blitq->aborting = 0;
 565                 spin_lock_init(&blitq->blit_lock);
 566                 for (j=0; j<VIA_NUM_BLIT_SLOTS; ++j) {
 567                         DRM_INIT_WAITQUEUE(blitq->blit_queue + j);
 568                 }
 569                 DRM_INIT_WAITQUEUE(&blitq->busy_queue);
 570                 INIT_WORK(&blitq->wq, via_dmablit_workqueue);
 571                 setup_timer(&blitq->poll_timer, via_dmablit_timer,
 572                                 (unsigned long)blitq);
 573         }
 574 }
 575
 576 /*
 577  * Build all info and do all mappings required for a blit.
 578  */
 579
 580
 581 static int
 582 via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmablit_t *xfer)
 583 {
 584         int draw = xfer->to_fb;
 585         int ret = 0;
 586
 587         vsg->direction = (draw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
 588         vsg->bounce_buffer = NULL;
 589
 590         vsg->state = dr_via_sg_init;
 591
 592         if (xfer->num_lines <= 0 || xfer->line_length <= 0) {
 593                 DRM_ERROR("Zero size bitblt.\n");
 594                 return -EINVAL;
 595         }
 596
 597         /*
 598          * Below check is a driver limitation, not a hardware one. We
 599          * don't want to lock unused pages, and don't want to incoporate the
 600          * extra logic of avoiding them. Make sure there are no.
 601          * (Not a big limitation anyway.)
 602          */
 603
 604         if ((xfer->mem_stride - xfer->line_length) > 2*PAGE_SIZE) {
 605                 DRM_ERROR("Too large system memory stride. Stride: %d, "
 606                           "Length: %d\n", xfer->mem_stride, xfer->line_length);
 607                 return -EINVAL;
 608         }
 609
 610         if ((xfer->mem_stride == xfer->line_length) &&
 611            (xfer->fb_stride == xfer->line_length)) {
 612                 xfer->mem_stride *= xfer->num_lines;
 613                 xfer->line_length = xfer->mem_stride;
 614                 xfer->fb_stride = xfer->mem_stride;
 615                 xfer->num_lines = 1;
 616         }
 617
 618         /*
 619          * Don't lock an arbitrary large number of pages, since that causes a
 620          * DOS security hole.
 621          */
 622
 623         if (xfer->num_lines > 2048 || (xfer->num_lines*xfer->mem_stride > (2048*2048*4))) {
 624                 DRM_ERROR("Too large PCI DMA bitblt.\n");
 625                 return -EINVAL;
 626         }
 627
 628         /*
 629          * we allow a negative fb stride to allow flipping of images in
 630          * transfer.
 631          */
 632
 633         if (xfer->mem_stride < xfer->line_length ||
 634                 abs(xfer->fb_stride) < xfer->line_length) {
 635                 DRM_ERROR("Invalid frame-buffer / memory stride.\n");
 636                 return -EINVAL;
 637         }
 638
 639         /*
 640          * A hardware bug seems to be worked around if system memory addresses start on
 641          * 16 byte boundaries. This seems a bit restrictive however. VIA is contacted
 642          * about this. Meanwhile, impose the following restrictions:
 643          */
 644
 645 #ifdef VIA_BUGFREE
 646         if ((((unsigned long)xfer->mem_addr & 3) != ((unsigned long)xfer->fb_addr & 3)) ||
 647             ((xfer->num_lines > 1) && ((xfer->mem_stride & 3) != (xfer->fb_stride & 3)))) {
 648                 DRM_ERROR("Invalid DRM bitblt alignment.\n");
 649                 return -EINVAL;
 650         }
 651 #else
 652         if ((((unsigned long)xfer->mem_addr & 15) ||
 653               ((unsigned long)xfer->fb_addr & 3)) ||
 654            ((xfer->num_lines > 1) &&
 655            ((xfer->mem_stride & 15) || (xfer->fb_stride & 3)))) {
 656                 DRM_ERROR("Invalid DRM bitblt alignment.\n");
 657                 return -EINVAL;
 658         }
 659 #endif
 660
 661         if (0 != (ret = via_lock_all_dma_pages(vsg, xfer))) {
 662                 DRM_ERROR("Could not lock DMA pages.\n");
 663                 via_free_sg_info(dev->pdev, vsg);
 664                 return ret;
 665         }
 666
 667         via_map_blit_for_device(dev->pdev, xfer, vsg, 0);
 668         if (0 != (ret = via_alloc_desc_pages(vsg))) {
 669                 DRM_ERROR("Could not allocate DMA descriptor pages.\n");
 670                 via_free_sg_info(dev->pdev, vsg);
 671                 return ret;
 672         }
 673         via_map_blit_for_device(dev->pdev, xfer, vsg, 1);
 674
 675         return 0;
 676 }
 677
 678
 679 /*
 680  * Reserve one free slot in the blit queue. Will wait for one second for one
 681  * to become available. Otherwise -EBUSY is returned.
 682  */
 683
 684 static int
 685 via_dmablit_grab_slot(drm_via_blitq_t *blitq, int engine)
 686 {
 687         int ret=0;
 688         unsigned long irqsave;
 689
 690         DRM_DEBUG("Num free is %d\n", blitq->num_free);
 691         spin_lock_irqsave(&blitq->blit_lock, irqsave);
 692         while(blitq->num_free == 0) {
 693                 spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 694
 695                 DRM_WAIT_ON(ret, blitq->busy_queue, DRM_HZ, blitq->num_free > 0);
 696                 if (ret) {
 697                         return (-EINTR == ret) ? -EAGAIN : ret;
 698                 }
 699
 700                 spin_lock_irqsave(&blitq->blit_lock, irqsave);
 701         }
 702
 703         blitq->num_free--;
 704         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 705
 706         return 0;
 707 }
 708
 709 /*
 710  * Hand back a free slot if we changed our mind.
 711  */
 712
 713 static void
 714 via_dmablit_release_slot(drm_via_blitq_t *blitq)
 715 {
 716         unsigned long irqsave;
 717
 718         spin_lock_irqsave(&blitq->blit_lock, irqsave);
 719         blitq->num_free++;
 720         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 721         DRM_WAKEUP( &blitq->busy_queue );
 722 }
 723
 724 /*
 725  * Grab a free slot. Build blit info and queue a blit.
 726  */
 727
 728
 729 static int
 730 via_dmablit(struct drm_device *dev, drm_via_dmablit_t *xfer)
 731 {
 732         drm_via_private_t *dev_priv = (drm_via_private_t *)dev->dev_private;
 733         drm_via_sg_info_t *vsg;
 734         drm_via_blitq_t *blitq;
 735         int ret;
 736         int engine;
 737         unsigned long irqsave;
 738
 739         if (dev_priv == NULL) {
 740                 DRM_ERROR("Called without initialization.\n");
 741                 return -EINVAL;
 742         }
 743
 744         engine = (xfer->to_fb) ? 0 : 1;
 745         blitq = dev_priv->blit_queues + engine;
 746         if (0 != (ret = via_dmablit_grab_slot(blitq, engine))) {
 747                 return ret;
 748         }
 749         if (NULL == (vsg = kmalloc(sizeof(*vsg), GFP_KERNEL))) {
 750                 via_dmablit_release_slot(blitq);
 751                 return -ENOMEM;
 752         }
 753         if (0 != (ret = via_build_sg_info(dev, vsg, xfer))) {
 754                 via_dmablit_release_slot(blitq);
 755                 kfree(vsg);
 756                 return ret;
 757         }
 758         spin_lock_irqsave(&blitq->blit_lock, irqsave);
 759
 760         blitq->blits[blitq->head++] = vsg;
 761         if (blitq->head >= VIA_NUM_BLIT_SLOTS)
 762                 blitq->head = 0;
 763         blitq->num_outstanding++;
 764         xfer->sync.sync_handle = ++blitq->cur_blit_handle;
 765
 766         spin_unlock_irqrestore(&blitq->blit_lock, irqsave);
 767         xfer->sync.engine = engine;
 768
 769         via_dmablit_handler(dev, engine, 0);
 770
 771         return 0;
 772 }
 773
 774 /*
 775  * Sync on a previously submitted blit. Note that the X server use signals extensively, and
 776  * that there is a very big probability that this IOCTL will be interrupted by a signal. In that
 777  * case it returns with -EAGAIN for the signal to be delivered.
 778  * The caller should then reissue the IOCTL. This is similar to what is being done for drmGetLock().
 779  */
 780
 781 int
 782 via_dma_blit_sync( struct drm_device *dev, void *data, struct drm_file *file_priv )
 783 {
 784         drm_via_blitsync_t *sync = data;
 785         int err;
 786
 787         if (sync->engine >= VIA_NUM_BLIT_ENGINES)
 788                 return -EINVAL;
 789
 790         err = via_dmablit_sync(dev, sync->sync_handle, sync->engine);
 791
 792         if (-EINTR == err)
 793                 err = -EAGAIN;
 794
 795         return err;
 796 }
 797
 798
 799 /*
 800  * Queue a blit and hand back a handle to be used for sync. This IOCTL may be interrupted by a signal
 801  * while waiting for a free slot in the blit queue. In that case it returns with -EAGAIN and should
 802  * be reissued. See the above IOCTL code.
 803  */
 804
 805 int
 806 via_dma_blit( struct drm_device *dev, void *data, struct drm_file *file_priv )
 807 {
 808         drm_via_dmablit_t *xfer = data;
 809         int err;
 810
 811         err = via_dmablit(dev, xfer);
 812
 813         return err;
 814 }