drivers/gpu/drm/nouveau/nv04_dfp.c

   1 /*
   2  * Copyright 2003 NVIDIA, Corporation
   3  * Copyright 2006 Dave Airlie
   4  * Copyright 2007 Maarten Maathuis
   5  * Copyright 2007-2009 Stuart Bennett
   6  *
   7  * Permission is hereby granted, free of charge, to any person obtaining a
   8  * copy of this software and associated documentation files (the "Software"),
   9  * to deal in the Software without restriction, including without limitation
  10  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
  11  * and/or sell copies of the Software, and to permit persons to whom the
  12  * Software is furnished to do so, subject to the following conditions:
  13  *
  14  * The above copyright notice and this permission notice (including the next
  15  * paragraph) shall be included in all copies or substantial portions of the
  16  * Software.
  17  *
  18  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  19  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  20  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  21  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  22  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  23  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  24  * DEALINGS IN THE SOFTWARE.
  25  */
  26
  27 #include "drmP.h"
  28 #include "drm_crtc_helper.h"
  29
  30 #include "nouveau_drv.h"
  31 #include "nouveau_encoder.h"
  32 #include "nouveau_connector.h"
  33 #include "nouveau_crtc.h"
  34 #include "nouveau_hw.h"
  35 #include "nvreg.h"
  36
  37 #include "i2c/sil164.h"
  38
  39 #define FP_TG_CONTROL_ON  (NV_PRAMDAC_FP_TG_CONTROL_DISPEN_POS |        \
  40                            NV_PRAMDAC_FP_TG_CONTROL_HSYNC_POS |         \
  41                            NV_PRAMDAC_FP_TG_CONTROL_VSYNC_POS)
  42 #define FP_TG_CONTROL_OFF (NV_PRAMDAC_FP_TG_CONTROL_DISPEN_DISABLE |    \
  43                            NV_PRAMDAC_FP_TG_CONTROL_HSYNC_DISABLE |     \
  44                            NV_PRAMDAC_FP_TG_CONTROL_VSYNC_DISABLE)
  45
  46 static inline bool is_fpc_off(uint32_t fpc)
  47 {
  48         return ((fpc & (FP_TG_CONTROL_ON | FP_TG_CONTROL_OFF)) ==
  49                         FP_TG_CONTROL_OFF);
  50 }
  51
  52 int nv04_dfp_get_bound_head(struct drm_device *dev, struct dcb_entry *dcbent)
  53 {
  54         /* special case of nv_read_tmds to find crtc associated with an output.
  55          * this does not give a correct answer for off-chip dvi, but there's no
  56          * use for such an answer anyway
  57          */
  58         int ramdac = (dcbent->or & OUTPUT_C) >> 2;
  59
  60         NVWriteRAMDAC(dev, ramdac, NV_PRAMDAC_FP_TMDS_CONTROL,
  61         NV_PRAMDAC_FP_TMDS_CONTROL_WRITE_DISABLE | 0x4);
  62         return ((NVReadRAMDAC(dev, ramdac, NV_PRAMDAC_FP_TMDS_DATA) & 0x8) >> 3) ^ ramdac;
  63 }
  64
  65 void nv04_dfp_bind_head(struct drm_device *dev, struct dcb_entry *dcbent,
  66                         int head, bool dl)
  67 {
  68         /* The BIOS scripts don't do this for us, sadly
  69          * Luckily we do know the values ;-)
  70          *
  71          * head < 0 indicates we wish to force a setting with the overrideval
  72          * (for VT restore etc.)
  73          */
  74
  75         int ramdac = (dcbent->or & OUTPUT_C) >> 2;
  76         uint8_t tmds04 = 0x80;
  77
  78         if (head != ramdac)
  79                 tmds04 = 0x88;
  80
  81         if (dcbent->type == OUTPUT_LVDS)
  82                 tmds04 |= 0x01;
  83
  84         nv_write_tmds(dev, dcbent->or, 0, 0x04, tmds04);
  85
  86         if (dl) /* dual link */
  87                 nv_write_tmds(dev, dcbent->or, 1, 0x04, tmds04 ^ 0x08);
  88 }
  89
  90 void nv04_dfp_disable(struct drm_device *dev, int head)
  91 {
  92         struct drm_nouveau_private *dev_priv = dev->dev_private;
  93         struct nv04_crtc_reg *crtcstate = dev_priv->mode_reg.crtc_reg;
  94
  95         if (NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL) &
  96             FP_TG_CONTROL_ON) {
  97                 /* digital remnants must be cleaned before new crtc
  98                  * values programmed.  delay is time for the vga stuff
  99                  * to realise it's in control again
 100                  */
 101                 NVWriteRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL,
 102                               FP_TG_CONTROL_OFF);
 103                 msleep(50);
 104         }
 105         /* don't inadvertently turn it on when state written later */
 106         crtcstate[head].fp_control = FP_TG_CONTROL_OFF;
 107 }
 108
 109 void nv04_dfp_update_fp_control(struct drm_encoder *encoder, int mode)
 110 {
 111         struct drm_device *dev = encoder->dev;
 112         struct drm_nouveau_private *dev_priv = dev->dev_private;
 113         struct drm_crtc *crtc;
 114         struct nouveau_crtc *nv_crtc;
 115         uint32_t *fpc;
 116
 117         if (mode == DRM_MODE_DPMS_ON) {
 118                 nv_crtc = nouveau_crtc(encoder->crtc);
 119                 fpc = &dev_priv->mode_reg.crtc_reg[nv_crtc->index].fp_control;
 120
 121                 if (is_fpc_off(*fpc)) {
 122                         /* using saved value is ok, as (is_digital && dpms_on &&
 123                          * fp_control==OFF) is (at present) *only* true when
 124                          * fpc's most recent change was by below "off" code
 125                          */
 126                         *fpc = nv_crtc->dpms_saved_fp_control;
 127                 }
 128
 129                 nv_crtc->fp_users |= 1 << nouveau_encoder(encoder)->dcb->index;
 130                 NVWriteRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_FP_TG_CONTROL, *fpc);
 131         } else {
 132                 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 133                         nv_crtc = nouveau_crtc(crtc);
 134                         fpc = &dev_priv->mode_reg.crtc_reg[nv_crtc->index].fp_control;
 135
 136                         nv_crtc->fp_users &= ~(1 << nouveau_encoder(encoder)->dcb->index);
 137                         if (!is_fpc_off(*fpc) && !nv_crtc->fp_users) {
 138                                 nv_crtc->dpms_saved_fp_control = *fpc;
 139                                 /* cut the FP output */
 140                                 *fpc &= ~FP_TG_CONTROL_ON;
 141                                 *fpc |= FP_TG_CONTROL_OFF;
 142                                 NVWriteRAMDAC(dev, nv_crtc->index,
 143                                               NV_PRAMDAC_FP_TG_CONTROL, *fpc);
 144                         }
 145                 }
 146         }
 147 }
 148
 149 static struct drm_encoder *get_tmds_slave(struct drm_encoder *encoder)
 150 {
 151         struct drm_device *dev = encoder->dev;
 152         struct dcb_entry *dcb = nouveau_encoder(encoder)->dcb;
 153         struct drm_encoder *slave;
 154
 155         if (dcb->type != OUTPUT_TMDS || dcb->location == DCB_LOC_ON_CHIP)
 156                 return NULL;
 157
 158         /* Some BIOSes (e.g. the one in a Quadro FX1000) report several
 159          * TMDS transmitters at the same I2C address, in the same I2C
 160          * bus. This can still work because in that case one of them is
 161          * always hard-wired to a reasonable configuration using straps,
 162          * and the other one needs to be programmed.
 163          *
 164          * I don't think there's a way to know which is which, even the
 165          * blob programs the one exposed via I2C for *both* heads, so
 166          * let's do the same.
 167          */
 168         list_for_each_entry(slave, &dev->mode_config.encoder_list, head) {
 169                 struct dcb_entry *slave_dcb = nouveau_encoder(slave)->dcb;
 170
 171                 if (slave_dcb->type == OUTPUT_TMDS && get_slave_funcs(slave) &&
 172                     slave_dcb->tmdsconf.slave_addr == dcb->tmdsconf.slave_addr)
 173                         return slave;
 174         }
 175
 176         return NULL;
 177 }
 178
 179 static bool nv04_dfp_mode_fixup(struct drm_encoder *encoder,
 180                                 struct drm_display_mode *mode,
 181                                 struct drm_display_mode *adjusted_mode)
 182 {
 183         struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
 184         struct nouveau_connector *nv_connector = nouveau_encoder_connector_get(nv_encoder);
 185
 186         /* For internal panels and gpu scaling on DVI we need the native mode */
 187         if (nv_connector->scaling_mode != DRM_MODE_SCALE_NONE) {
 188                 if (!nv_connector->native_mode)
 189                         return false;
 190                 nv_encoder->mode = *nv_connector->native_mode;
 191                 adjusted_mode->clock = nv_connector->native_mode->clock;
 192         } else {
 193                 nv_encoder->mode = *adjusted_mode;
 194         }
 195
 196         return true;
 197 }
 198
 199 static void nv04_dfp_prepare_sel_clk(struct drm_device *dev,
 200                                      struct nouveau_encoder *nv_encoder, int head)
 201 {
 202         struct drm_nouveau_private *dev_priv = dev->dev_private;
 203         struct nv04_mode_state *state = &dev_priv->mode_reg;
 204         uint32_t bits1618 = nv_encoder->dcb->or & OUTPUT_A ? 0x10000 : 0x40000;
 205
 206         if (nv_encoder->dcb->location != DCB_LOC_ON_CHIP)
 207                 return;
 208
 209         /* SEL_CLK is only used on the primary ramdac
 210          * It toggles spread spectrum PLL output and sets the bindings of PLLs
 211          * to heads on digital outputs
 212          */
 213         if (head)
 214                 state->sel_clk |= bits1618;
 215         else
 216                 state->sel_clk &= ~bits1618;
 217
 218         /* nv30:
 219          *      bit 0           NVClk spread spectrum on/off
 220          *      bit 2           MemClk spread spectrum on/off
 221          *      bit 4           PixClk1 spread spectrum on/off toggle
 222          *      bit 6           PixClk2 spread spectrum on/off toggle
 223          *
 224          * nv40 (observations from bios behaviour and mmio traces):
 225          *      bits 4&6        as for nv30
 226          *      bits 5&7        head dependent as for bits 4&6, but do not appear with 4&6;
 227          *                      maybe a different spread mode
 228          *      bits 8&10       seen on dual-link dvi outputs, purpose unknown (set by POST scripts)
 229          *      The logic behind turning spread spectrum on/off in the first place,
 230          *      and which bit-pair to use, is unclear on nv40 (for earlier cards, the fp table
 231          *      entry has the necessary info)
 232          */
 233         if (nv_encoder->dcb->type == OUTPUT_LVDS && dev_priv->saved_reg.sel_clk & 0xf0) {
 234                 int shift = (dev_priv->saved_reg.sel_clk & 0x50) ? 0 : 1;
 235
 236                 state->sel_clk &= ~0xf0;
 237                 state->sel_clk |= (head ? 0x40 : 0x10) << shift;
 238         }
 239 }
 240
 241 static void nv04_dfp_prepare(struct drm_encoder *encoder)
 242 {
 243         struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
 244         struct drm_encoder_helper_funcs *helper = encoder->helper_private;
 245         struct drm_device *dev = encoder->dev;
 246         struct drm_nouveau_private *dev_priv = dev->dev_private;
 247         int head = nouveau_crtc(encoder->crtc)->index;
 248         struct nv04_crtc_reg *crtcstate = dev_priv->mode_reg.crtc_reg;
 249         uint8_t *cr_lcd = &crtcstate[head].CRTC[NV_CIO_CRE_LCD__INDEX];
 250         uint8_t *cr_lcd_oth = &crtcstate[head ^ 1].CRTC[NV_CIO_CRE_LCD__INDEX];
 251
 252         helper->dpms(encoder, DRM_MODE_DPMS_OFF);
 253
 254         nv04_dfp_prepare_sel_clk(dev, nv_encoder, head);
 255
 256         /* Some NV4x have unknown values (0x3f, 0x50, 0x54, 0x6b, 0x79, 0x7f)
 257          * at LCD__INDEX which we don't alter
 258          */
 259         if (!(*cr_lcd & 0x44)) {
 260                 *cr_lcd = 0x3;
 261
 262                 if (nv_two_heads(dev)) {
 263                         if (nv_encoder->dcb->location == DCB_LOC_ON_CHIP)
 264                                 *cr_lcd |= head ? 0x0 : 0x8;
 265                         else {
 266                                 *cr_lcd |= (nv_encoder->dcb->or << 4) & 0x30;
 267                                 if (nv_encoder->dcb->type == OUTPUT_LVDS)
 268                                         *cr_lcd |= 0x30;
 269                                 if ((*cr_lcd & 0x30) == (*cr_lcd_oth & 0x30)) {
 270                                         /* avoid being connected to both crtcs */
 271                                         *cr_lcd_oth &= ~0x30;
 272                                         NVWriteVgaCrtc(dev, head ^ 1,
 273                                                        NV_CIO_CRE_LCD__INDEX,
 274                                                        *cr_lcd_oth);
 275                                 }
 276                         }
 277                 }
 278         }
 279 }
 280
 281
 282 static void nv04_dfp_mode_set(struct drm_encoder *encoder,
 283                               struct drm_display_mode *mode,
 284                               struct drm_display_mode *adjusted_mode)
 285 {
 286         struct drm_device *dev = encoder->dev;
 287         struct drm_nouveau_private *dev_priv = dev->dev_private;
 288         struct nouveau_crtc *nv_crtc = nouveau_crtc(encoder->crtc);
 289         struct nv04_crtc_reg *regp = &dev_priv->mode_reg.crtc_reg[nv_crtc->index];
 290         struct nv04_crtc_reg *savep = &dev_priv->saved_reg.crtc_reg[nv_crtc->index];
 291         struct nouveau_connector *nv_connector = nouveau_crtc_connector_get(nv_crtc);
 292         struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
 293         struct drm_display_mode *output_mode = &nv_encoder->mode;
 294         uint32_t mode_ratio, panel_ratio;
 295
 296         NV_DEBUG_KMS(dev, "Output mode on CRTC %d:\n", nv_crtc->index);
 297         drm_mode_debug_printmodeline(output_mode);
 298
 299         /* Initialize the FP registers in this CRTC. */
 300         regp->fp_horiz_regs[FP_DISPLAY_END] = output_mode->hdisplay - 1;
 301         regp->fp_horiz_regs[FP_TOTAL] = output_mode->htotal - 1;
 302         if (!nv_gf4_disp_arch(dev) ||
 303             (output_mode->hsync_start - output_mode->hdisplay) >=
 304                                         dev_priv->vbios.digital_min_front_porch)
 305                 regp->fp_horiz_regs[FP_CRTC] = output_mode->hdisplay;
 306         else
 307                 regp->fp_horiz_regs[FP_CRTC] = output_mode->hsync_start - dev_priv->vbios.digital_min_front_porch - 1;
 308         regp->fp_horiz_regs[FP_SYNC_START] = output_mode->hsync_start - 1;
 309         regp->fp_horiz_regs[FP_SYNC_END] = output_mode->hsync_end - 1;
 310         regp->fp_horiz_regs[FP_VALID_START] = output_mode->hskew;
 311         regp->fp_horiz_regs[FP_VALID_END] = output_mode->hdisplay - 1;
 312
 313         regp->fp_vert_regs[FP_DISPLAY_END] = output_mode->vdisplay - 1;
 314         regp->fp_vert_regs[FP_TOTAL] = output_mode->vtotal - 1;
 315         regp->fp_vert_regs[FP_CRTC] = output_mode->vtotal - 5 - 1;
 316         regp->fp_vert_regs[FP_SYNC_START] = output_mode->vsync_start - 1;
 317         regp->fp_vert_regs[FP_SYNC_END] = output_mode->vsync_end - 1;
 318         regp->fp_vert_regs[FP_VALID_START] = 0;
 319         regp->fp_vert_regs[FP_VALID_END] = output_mode->vdisplay - 1;
 320
 321         /* bit26: a bit seen on some g7x, no as yet discernable purpose */
 322         regp->fp_control = NV_PRAMDAC_FP_TG_CONTROL_DISPEN_POS |
 323                            (savep->fp_control & (1 << 26 | NV_PRAMDAC_FP_TG_CONTROL_READ_PROG));
 324         /* Deal with vsync/hsync polarity */
 325         /* LVDS screens do set this, but modes with +ve syncs are very rare */
 326         if (output_mode->flags & DRM_MODE_FLAG_PVSYNC)
 327                 regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_VSYNC_POS;
 328         if (output_mode->flags & DRM_MODE_FLAG_PHSYNC)
 329                 regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_HSYNC_POS;
 330         /* panel scaling first, as native would get set otherwise */
 331         if (nv_connector->scaling_mode == DRM_MODE_SCALE_NONE ||
 332             nv_connector->scaling_mode == DRM_MODE_SCALE_CENTER)        /* panel handles it */
 333                 regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_MODE_CENTER;
 334         else if (adjusted_mode->hdisplay == output_mode->hdisplay &&
 335                  adjusted_mode->vdisplay == output_mode->vdisplay) /* native mode */
 336                 regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_MODE_NATIVE;
 337         else /* gpu needs to scale */
 338                 regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_MODE_SCALE;
 339         if (nvReadEXTDEV(dev, NV_PEXTDEV_BOOT_0) & NV_PEXTDEV_BOOT_0_STRAP_FP_IFACE_12BIT)
 340                 regp->fp_control |= NV_PRAMDAC_FP_TG_CONTROL_WIDTH_12;
 341         if (nv_encoder->dcb->location != DCB_LOC_ON_CHIP &&
 342             output_mode->clock > 165000)
 343                 regp->fp_control |= (2 << 24);
 344         if (nv_encoder->dcb->type == OUTPUT_LVDS) {
 345                 bool duallink, dummy;
 346
 347                 nouveau_bios_parse_lvds_table(dev, nv_connector->native_mode->
 348                                               clock, &duallink, &dummy);
 349                 if (duallink)
 350                         regp->fp_control |= (8 << 28);
 351         } else
 352         if (output_mode->clock > 165000)
 353                 regp->fp_control |= (8 << 28);
 354
 355         regp->fp_debug_0 = NV_PRAMDAC_FP_DEBUG_0_YWEIGHT_ROUND |
 356                            NV_PRAMDAC_FP_DEBUG_0_XWEIGHT_ROUND |
 357                            NV_PRAMDAC_FP_DEBUG_0_YINTERP_BILINEAR |
 358                            NV_PRAMDAC_FP_DEBUG_0_XINTERP_BILINEAR |
 359                            NV_RAMDAC_FP_DEBUG_0_TMDS_ENABLED |
 360                            NV_PRAMDAC_FP_DEBUG_0_YSCALE_ENABLE |
 361                            NV_PRAMDAC_FP_DEBUG_0_XSCALE_ENABLE;
 362
 363         /* We want automatic scaling */
 364         regp->fp_debug_1 = 0;
 365         /* This can override HTOTAL and VTOTAL */
 366         regp->fp_debug_2 = 0;
 367
 368         /* Use 20.12 fixed point format to avoid floats */
 369         mode_ratio = (1 << 12) * adjusted_mode->hdisplay / adjusted_mode->vdisplay;
 370         panel_ratio = (1 << 12) * output_mode->hdisplay / output_mode->vdisplay;
 371         /* if ratios are equal, SCALE_ASPECT will automatically (and correctly)
 372          * get treated the same as SCALE_FULLSCREEN */
 373         if (nv_connector->scaling_mode == DRM_MODE_SCALE_ASPECT &&
 374             mode_ratio != panel_ratio) {
 375                 uint32_t diff, scale;
 376                 bool divide_by_2 = nv_gf4_disp_arch(dev);
 377
 378                 if (mode_ratio < panel_ratio) {
 379                         /* vertical needs to expand to glass size (automatic)
 380                          * horizontal needs to be scaled at vertical scale factor
 381                          * to maintain aspect */
 382
 383                         scale = (1 << 12) * adjusted_mode->vdisplay / output_mode->vdisplay;
 384                         regp->fp_debug_1 = NV_PRAMDAC_FP_DEBUG_1_XSCALE_TESTMODE_ENABLE |
 385                                            XLATE(scale, divide_by_2, NV_PRAMDAC_FP_DEBUG_1_XSCALE_VALUE);
 386
 387                         /* restrict area of screen used, horizontally */
 388                         diff = output_mode->hdisplay -
 389                                output_mode->vdisplay * mode_ratio / (1 << 12);
 390                         regp->fp_horiz_regs[FP_VALID_START] += diff / 2;
 391                         regp->fp_horiz_regs[FP_VALID_END] -= diff / 2;
 392                 }
 393
 394                 if (mode_ratio > panel_ratio) {
 395                         /* horizontal needs to expand to glass size (automatic)
 396                          * vertical needs to be scaled at horizontal scale factor
 397                          * to maintain aspect */
 398
 399                         scale = (1 << 12) * adjusted_mode->hdisplay / output_mode->hdisplay;
 400                         regp->fp_debug_1 = NV_PRAMDAC_FP_DEBUG_1_YSCALE_TESTMODE_ENABLE |
 401                                            XLATE(scale, divide_by_2, NV_PRAMDAC_FP_DEBUG_1_YSCALE_VALUE);
 402
 403                         /* restrict area of screen used, vertically */
 404                         diff = output_mode->vdisplay -
 405                                (1 << 12) * output_mode->hdisplay / mode_ratio;
 406                         regp->fp_vert_regs[FP_VALID_START] += diff / 2;
 407                         regp->fp_vert_regs[FP_VALID_END] -= diff / 2;
 408                 }
 409         }
 410
 411         /* Output property. */
 412         if (nv_connector->use_dithering) {
 413                 if (dev_priv->chipset == 0x11)
 414                         regp->dither = savep->dither | 0x00010000;
 415                 else {
 416                         int i;
 417                         regp->dither = savep->dither | 0x00000001;
 418                         for (i = 0; i < 3; i++) {
 419                                 regp->dither_regs[i] = 0xe4e4e4e4;
 420                                 regp->dither_regs[i + 3] = 0x44444444;
 421                         }
 422                 }
 423         } else {
 424                 if (dev_priv->chipset != 0x11) {
 425                         /* reset them */
 426                         int i;
 427                         for (i = 0; i < 3; i++) {
 428                                 regp->dither_regs[i] = savep->dither_regs[i];
 429                                 regp->dither_regs[i + 3] = savep->dither_regs[i + 3];
 430                         }
 431                 }
 432                 regp->dither = savep->dither;
 433         }
 434
 435         regp->fp_margin_color = 0;
 436 }
 437
 438 static void nv04_dfp_commit(struct drm_encoder *encoder)
 439 {
 440         struct drm_device *dev = encoder->dev;
 441         struct drm_nouveau_private *dev_priv = dev->dev_private;
 442         struct drm_encoder_helper_funcs *helper = encoder->helper_private;
 443         struct nouveau_crtc *nv_crtc = nouveau_crtc(encoder->crtc);
 444         struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
 445         struct dcb_entry *dcbe = nv_encoder->dcb;
 446         int head = nouveau_crtc(encoder->crtc)->index;
 447         struct drm_encoder *slave_encoder;
 448
 449         if (dcbe->type == OUTPUT_TMDS)
 450                 run_tmds_table(dev, dcbe, head, nv_encoder->mode.clock);
 451         else if (dcbe->type == OUTPUT_LVDS)
 452                 call_lvds_script(dev, dcbe, head, LVDS_RESET, nv_encoder->mode.clock);
 453
 454         /* update fp_control state for any changes made by scripts,
 455          * so correct value is written at DPMS on */
 456         dev_priv->mode_reg.crtc_reg[head].fp_control =
 457                 NVReadRAMDAC(dev, head, NV_PRAMDAC_FP_TG_CONTROL);
 458
 459         /* This could use refinement for flatpanels, but it should work this way */
 460         if (dev_priv->chipset < 0x44)
 461                 NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + nv04_dac_output_offset(encoder), 0xf0000000);
 462         else
 463                 NVWriteRAMDAC(dev, 0, NV_PRAMDAC_TEST_CONTROL + nv04_dac_output_offset(encoder), 0x00100000);
 464
 465         /* Init external transmitters */
 466         slave_encoder = get_tmds_slave(encoder);
 467         if (slave_encoder)
 468                 get_slave_funcs(slave_encoder)->mode_set(
 469                         slave_encoder, &nv_encoder->mode, &nv_encoder->mode);
 470
 471         helper->dpms(encoder, DRM_MODE_DPMS_ON);
 472
 473         NV_INFO(dev, "Output %s is running on CRTC %d using output %c\n",
 474                 drm_get_connector_name(&nouveau_encoder_connector_get(nv_encoder)->base),
 475                 nv_crtc->index, '@' + ffs(nv_encoder->dcb->or));
 476 }
 477
 478 static void nv04_dfp_update_backlight(struct drm_encoder *encoder, int mode)
 479 {
 480 #ifdef __powerpc__
 481         struct drm_device *dev = encoder->dev;
 482
 483         /* BIOS scripts usually take care of the backlight, thanks
 484          * Apple for your consistency.
 485          */
 486         if (dev->pci_device == 0x0179 || dev->pci_device == 0x0189 ||
 487             dev->pci_device == 0x0329) {
 488                 if (mode == DRM_MODE_DPMS_ON) {
 489                         nv_mask(dev, NV_PBUS_DEBUG_DUALHEAD_CTL, 0, 1 << 31);
 490                         nv_mask(dev, NV_PCRTC_GPIO_EXT, 3, 1);
 491                 } else {
 492                         nv_mask(dev, NV_PBUS_DEBUG_DUALHEAD_CTL, 1 << 31, 0);
 493                         nv_mask(dev, NV_PCRTC_GPIO_EXT, 3, 0);
 494                 }
 495         }
 496 #endif
 497 }
 498
 499 static inline bool is_powersaving_dpms(int mode)
 500 {
 501         return (mode != DRM_MODE_DPMS_ON);
 502 }
 503
 504 static void nv04_lvds_dpms(struct drm_encoder *encoder, int mode)
 505 {
 506         struct drm_device *dev = encoder->dev;
 507         struct drm_crtc *crtc = encoder->crtc;
 508         struct drm_nouveau_private *dev_priv = dev->dev_private;
 509         struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
 510         bool was_powersaving = is_powersaving_dpms(nv_encoder->last_dpms);
 511
 512         if (nv_encoder->last_dpms == mode)
 513                 return;
 514         nv_encoder->last_dpms = mode;
 515
 516         NV_INFO(dev, "Setting dpms mode %d on lvds encoder (output %d)\n",
 517                      mode, nv_encoder->dcb->index);
 518
 519         if (was_powersaving && is_powersaving_dpms(mode))
 520                 return;
 521
 522         if (nv_encoder->dcb->lvdsconf.use_power_scripts) {
 523                 struct nouveau_connector *nv_connector = nouveau_encoder_connector_get(nv_encoder);
 524
 525                 /* when removing an output, crtc may not be set, but PANEL_OFF
 526                  * must still be run
 527                  */
 528                 int head = crtc ? nouveau_crtc(crtc)->index :
 529                            nv04_dfp_get_bound_head(dev, nv_encoder->dcb);
 530
 531                 if (mode == DRM_MODE_DPMS_ON) {
 532                         if (!nv_connector->native_mode) {
 533                                 NV_ERROR(dev, "Not turning on LVDS without native mode\n");
 534                                 return;
 535                         }
 536                         call_lvds_script(dev, nv_encoder->dcb, head,
 537                                          LVDS_PANEL_ON, nv_connector->native_mode->clock);
 538                 } else
 539                         /* pxclk of 0 is fine for PANEL_OFF, and for a
 540                          * disconnected LVDS encoder there is no native_mode
 541                          */
 542                         call_lvds_script(dev, nv_encoder->dcb, head,
 543                                          LVDS_PANEL_OFF, 0);
 544         }
 545
 546         nv04_dfp_update_backlight(encoder, mode);
 547         nv04_dfp_update_fp_control(encoder, mode);
 548
 549         if (mode == DRM_MODE_DPMS_ON)
 550                 nv04_dfp_prepare_sel_clk(dev, nv_encoder, nouveau_crtc(crtc)->index);
 551         else {
 552                 dev_priv->mode_reg.sel_clk = NVReadRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK);
 553                 dev_priv->mode_reg.sel_clk &= ~0xf0;
 554         }
 555         NVWriteRAMDAC(dev, 0, NV_PRAMDAC_SEL_CLK, dev_priv->mode_reg.sel_clk);
 556 }
 557
 558 static void nv04_tmds_dpms(struct drm_encoder *encoder, int mode)
 559 {
 560         struct drm_device *dev = encoder->dev;
 561         struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
 562
 563         if (nv_encoder->last_dpms == mode)
 564                 return;
 565         nv_encoder->last_dpms = mode;
 566
 567         NV_INFO(dev, "Setting dpms mode %d on tmds encoder (output %d)\n",
 568                      mode, nv_encoder->dcb->index);
 569
 570         nv04_dfp_update_backlight(encoder, mode);
 571         nv04_dfp_update_fp_control(encoder, mode);
 572 }
 573
 574 static void nv04_dfp_save(struct drm_encoder *encoder)
 575 {
 576         struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
 577         struct drm_device *dev = encoder->dev;
 578
 579         if (nv_two_heads(dev))
 580                 nv_encoder->restore.head =
 581                         nv04_dfp_get_bound_head(dev, nv_encoder->dcb);
 582 }
 583
 584 static void nv04_dfp_restore(struct drm_encoder *encoder)
 585 {
 586         struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
 587         struct drm_device *dev = encoder->dev;
 588         struct drm_nouveau_private *dev_priv = dev->dev_private;
 589         int head = nv_encoder->restore.head;
 590
 591         if (nv_encoder->dcb->type == OUTPUT_LVDS) {
 592                 struct drm_display_mode *native_mode = nouveau_encoder_connector_get(nv_encoder)->native_mode;
 593                 if (native_mode)
 594                         call_lvds_script(dev, nv_encoder->dcb, head, LVDS_PANEL_ON,
 595                                          native_mode->clock);
 596                 else
 597                         NV_ERROR(dev, "Not restoring LVDS without native mode\n");
 598
 599         } else if (nv_encoder->dcb->type == OUTPUT_TMDS) {
 600                 int clock = nouveau_hw_pllvals_to_clk
 601                                         (&dev_priv->saved_reg.crtc_reg[head].pllvals);
 602
 603                 run_tmds_table(dev, nv_encoder->dcb, head, clock);
 604         }
 605
 606         nv_encoder->last_dpms = NV_DPMS_CLEARED;
 607 }
 608
 609 static void nv04_dfp_destroy(struct drm_encoder *encoder)
 610 {
 611         struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
 612
 613         NV_DEBUG_KMS(encoder->dev, "\n");
 614
 615         if (get_slave_funcs(encoder))
 616                 get_slave_funcs(encoder)->destroy(encoder);
 617
 618         drm_encoder_cleanup(encoder);
 619         kfree(nv_encoder);
 620 }
 621
 622 static void nv04_tmds_slave_init(struct drm_encoder *encoder)
 623 {
 624         struct drm_device *dev = encoder->dev;
 625         struct dcb_entry *dcb = nouveau_encoder(encoder)->dcb;
 626         struct nouveau_i2c_chan *i2c = nouveau_i2c_find(dev, 2);
 627         struct i2c_board_info info[] = {
 628                 {
 629                         .type = "sil164",
 630                         .addr = (dcb->tmdsconf.slave_addr == 0x7 ? 0x3a : 0x38),
 631                         .platform_data = &(struct sil164_encoder_params) {
 632                                 SIL164_INPUT_EDGE_RISING
 633                         }
 634                 },
 635                 { }
 636         };
 637         int type;
 638
 639         if (!nv_gf4_disp_arch(dev) || !i2c ||
 640             get_tmds_slave(encoder))
 641                 return;
 642
 643         type = nouveau_i2c_identify(dev, "TMDS transmitter", info, 2);
 644         if (type < 0)
 645                 return;
 646
 647         drm_i2c_encoder_init(dev, to_encoder_slave(encoder),
 648                              &i2c->adapter, &info[type]);
 649 }
 650
 651 static const struct drm_encoder_helper_funcs nv04_lvds_helper_funcs = {
 652         .dpms = nv04_lvds_dpms,
 653         .save = nv04_dfp_save,
 654         .restore = nv04_dfp_restore,
 655         .mode_fixup = nv04_dfp_mode_fixup,
 656         .prepare = nv04_dfp_prepare,
 657         .commit = nv04_dfp_commit,
 658         .mode_set = nv04_dfp_mode_set,
 659         .detect = NULL,
 660 };
 661
 662 static const struct drm_encoder_helper_funcs nv04_tmds_helper_funcs = {
 663         .dpms = nv04_tmds_dpms,
 664         .save = nv04_dfp_save,
 665         .restore = nv04_dfp_restore,
 666         .mode_fixup = nv04_dfp_mode_fixup,
 667         .prepare = nv04_dfp_prepare,
 668         .commit = nv04_dfp_commit,
 669         .mode_set = nv04_dfp_mode_set,
 670         .detect = NULL,
 671 };
 672
 673 static const struct drm_encoder_funcs nv04_dfp_funcs = {
 674         .destroy = nv04_dfp_destroy,
 675 };
 676
 677 int
 678 nv04_dfp_create(struct drm_connector *connector, struct dcb_entry *entry)
 679 {
 680         const struct drm_encoder_helper_funcs *helper;
 681         struct nouveau_encoder *nv_encoder = NULL;
 682         struct drm_encoder *encoder;
 683         int type;
 684
 685         switch (entry->type) {
 686         case OUTPUT_TMDS:
 687                 type = DRM_MODE_ENCODER_TMDS;
 688                 helper = &nv04_tmds_helper_funcs;
 689                 break;
 690         case OUTPUT_LVDS:
 691                 type = DRM_MODE_ENCODER_LVDS;
 692                 helper = &nv04_lvds_helper_funcs;
 693                 break;
 694         default:
 695                 return -EINVAL;
 696         }
 697
 698         nv_encoder = kzalloc(sizeof(*nv_encoder), GFP_KERNEL);
 699         if (!nv_encoder)
 700                 return -ENOMEM;
 701
 702         encoder = to_drm_encoder(nv_encoder);
 703
 704         nv_encoder->dcb = entry;
 705         nv_encoder->or = ffs(entry->or) - 1;
 706
 707         drm_encoder_init(connector->dev, encoder, &nv04_dfp_funcs, type);
 708         drm_encoder_helper_add(encoder, helper);
 709
 710         encoder->possible_crtcs = entry->heads;
 711         encoder->possible_clones = 0;
 712
 713         if (entry->type == OUTPUT_TMDS &&
 714             entry->location != DCB_LOC_ON_CHIP)
 715                 nv04_tmds_slave_init(encoder);
 716
 717         drm_mode_connector_attach_encoder(connector, encoder);
 718         return 0;
 719 }