drivers/gpu/drm/i915/intel_crt.c

   1 /*
   2  * Copyright © 2006-2007 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  21  * DEALINGS IN THE SOFTWARE.
  22  *
  23  * Authors:
  24  *      Eric Anholt <eric@anholt.net>
  25  */
  26
  27 #include <linux/i2c.h>
  28 #include <linux/slab.h>
  29 #include "drmP.h"
  30 #include "drm.h"
  31 #include "drm_crtc.h"
  32 #include "drm_crtc_helper.h"
  33 #include "intel_drv.h"
  34 #include "i915_drm.h"
  35 #include "i915_drv.h"
  36
  37 static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
  38 {
  39         struct drm_device *dev = encoder->dev;
  40         struct drm_i915_private *dev_priv = dev->dev_private;
  41         u32 temp, reg;
  42
  43         if (HAS_PCH_SPLIT(dev))
  44                 reg = PCH_ADPA;
  45         else
  46                 reg = ADPA;
  47
  48         temp = I915_READ(reg);
  49         temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
  50         temp &= ~ADPA_DAC_ENABLE;
  51
  52         switch(mode) {
  53         case DRM_MODE_DPMS_ON:
  54                 temp |= ADPA_DAC_ENABLE;
  55                 break;
  56         case DRM_MODE_DPMS_STANDBY:
  57                 temp |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
  58                 break;
  59         case DRM_MODE_DPMS_SUSPEND:
  60                 temp |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
  61                 break;
  62         case DRM_MODE_DPMS_OFF:
  63                 temp |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
  64                 break;
  65         }
  66
  67         I915_WRITE(reg, temp);
  68 }
  69
  70 static int intel_crt_mode_valid(struct drm_connector *connector,
  71                                 struct drm_display_mode *mode)
  72 {
  73         struct drm_device *dev = connector->dev;
  74
  75         int max_clock = 0;
  76         if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
  77                 return MODE_NO_DBLESCAN;
  78
  79         if (mode->clock < 25000)
  80                 return MODE_CLOCK_LOW;
  81
  82         if (!IS_I9XX(dev))
  83                 max_clock = 350000;
  84         else
  85                 max_clock = 400000;
  86         if (mode->clock > max_clock)
  87                 return MODE_CLOCK_HIGH;
  88
  89         return MODE_OK;
  90 }
  91
  92 static bool intel_crt_mode_fixup(struct drm_encoder *encoder,
  93                                  struct drm_display_mode *mode,
  94                                  struct drm_display_mode *adjusted_mode)
  95 {
  96         return true;
  97 }
  98
  99 static void intel_crt_mode_set(struct drm_encoder *encoder,
 100                                struct drm_display_mode *mode,
 101                                struct drm_display_mode *adjusted_mode)
 102 {
 103
 104         struct drm_device *dev = encoder->dev;
 105         struct drm_crtc *crtc = encoder->crtc;
 106         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 107         struct drm_i915_private *dev_priv = dev->dev_private;
 108         int dpll_md_reg;
 109         u32 adpa, dpll_md;
 110         u32 adpa_reg;
 111
 112         if (intel_crtc->pipe == 0)
 113                 dpll_md_reg = DPLL_A_MD;
 114         else
 115                 dpll_md_reg = DPLL_B_MD;
 116
 117         if (HAS_PCH_SPLIT(dev))
 118                 adpa_reg = PCH_ADPA;
 119         else
 120                 adpa_reg = ADPA;
 121
 122         /*
 123          * Disable separate mode multiplier used when cloning SDVO to CRT
 124          * XXX this needs to be adjusted when we really are cloning
 125          */
 126         if (IS_I965G(dev) && !HAS_PCH_SPLIT(dev)) {
 127                 dpll_md = I915_READ(dpll_md_reg);
 128                 I915_WRITE(dpll_md_reg,
 129                            dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
 130         }
 131
 132         adpa = 0;
 133         if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 134                 adpa |= ADPA_HSYNC_ACTIVE_HIGH;
 135         if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
 136                 adpa |= ADPA_VSYNC_ACTIVE_HIGH;
 137
 138         if (intel_crtc->pipe == 0) {
 139                 if (HAS_PCH_CPT(dev))
 140                         adpa |= PORT_TRANS_A_SEL_CPT;
 141                 else
 142                         adpa |= ADPA_PIPE_A_SELECT;
 143                 if (!HAS_PCH_SPLIT(dev))
 144                         I915_WRITE(BCLRPAT_A, 0);
 145         } else {
 146                 if (HAS_PCH_CPT(dev))
 147                         adpa |= PORT_TRANS_B_SEL_CPT;
 148                 else
 149                         adpa |= ADPA_PIPE_B_SELECT;
 150                 if (!HAS_PCH_SPLIT(dev))
 151                         I915_WRITE(BCLRPAT_B, 0);
 152         }
 153
 154         I915_WRITE(adpa_reg, adpa);
 155 }
 156
 157 static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
 158 {
 159         struct drm_device *dev = connector->dev;
 160         struct drm_i915_private *dev_priv = dev->dev_private;
 161         u32 adpa, temp;
 162         bool ret;
 163         bool turn_off_dac = false;
 164
 165         temp = adpa = I915_READ(PCH_ADPA);
 166
 167         if (HAS_PCH_SPLIT(dev))
 168                 turn_off_dac = true;
 169
 170         adpa &= ~ADPA_CRT_HOTPLUG_MASK;
 171         if (turn_off_dac)
 172                 adpa &= ~ADPA_DAC_ENABLE;
 173
 174         /* disable HPD first */
 175         I915_WRITE(PCH_ADPA, adpa);
 176         (void)I915_READ(PCH_ADPA);
 177
 178         adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 |
 179                         ADPA_CRT_HOTPLUG_WARMUP_10MS |
 180                         ADPA_CRT_HOTPLUG_SAMPLE_4S |
 181                         ADPA_CRT_HOTPLUG_VOLTAGE_50 | /* default */
 182                         ADPA_CRT_HOTPLUG_VOLREF_325MV |
 183                         ADPA_CRT_HOTPLUG_ENABLE |
 184                         ADPA_CRT_HOTPLUG_FORCE_TRIGGER);
 185
 186         DRM_DEBUG_KMS("pch crt adpa 0x%x", adpa);
 187         I915_WRITE(PCH_ADPA, adpa);
 188
 189         if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
 190                      1000, 1))
 191                 DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
 192
 193         if (turn_off_dac) {
 194                 I915_WRITE(PCH_ADPA, temp);
 195                 (void)I915_READ(PCH_ADPA);
 196         }
 197
 198         /* Check the status to see if both blue and green are on now */
 199         adpa = I915_READ(PCH_ADPA);
 200         adpa &= ADPA_CRT_HOTPLUG_MONITOR_MASK;
 201         if ((adpa == ADPA_CRT_HOTPLUG_MONITOR_COLOR) ||
 202                 (adpa == ADPA_CRT_HOTPLUG_MONITOR_MONO))
 203                 ret = true;
 204         else
 205                 ret = false;
 206
 207         return ret;
 208 }
 209
 210 /**
 211  * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
 212  *
 213  * Not for i915G/i915GM
 214  *
 215  * \return true if CRT is connected.
 216  * \return false if CRT is disconnected.
 217  */
 218 static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 219 {
 220         struct drm_device *dev = connector->dev;
 221         struct drm_i915_private *dev_priv = dev->dev_private;
 222         u32 hotplug_en, orig, stat;
 223         bool ret = false;
 224         int i, tries = 0;
 225
 226         if (HAS_PCH_SPLIT(dev))
 227                 return intel_ironlake_crt_detect_hotplug(connector);
 228
 229         /*
 230          * On 4 series desktop, CRT detect sequence need to be done twice
 231          * to get a reliable result.
 232          */
 233
 234         if (IS_G4X(dev) && !IS_GM45(dev))
 235                 tries = 2;
 236         else
 237                 tries = 1;
 238         hotplug_en = orig = I915_READ(PORT_HOTPLUG_EN);
 239         hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
 240
 241         for (i = 0; i < tries ; i++) {
 242                 /* turn on the FORCE_DETECT */
 243                 I915_WRITE(PORT_HOTPLUG_EN, hotplug_en);
 244                 /* wait for FORCE_DETECT to go off */
 245                 if (wait_for((I915_READ(PORT_HOTPLUG_EN) &
 246                               CRT_HOTPLUG_FORCE_DETECT) == 0,
 247                              1000, 1))
 248                         DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off");
 249         }
 250
 251         stat = I915_READ(PORT_HOTPLUG_STAT);
 252         if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE)
 253                 ret = true;
 254
 255         /* clear the interrupt we just generated, if any */
 256         I915_WRITE(PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
 257
 258         /* and put the bits back */
 259         I915_WRITE(PORT_HOTPLUG_EN, orig);
 260
 261         return ret;
 262 }
 263
 264 static bool intel_crt_detect_ddc(struct drm_encoder *encoder)
 265 {
 266         struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
 267
 268         /* CRT should always be at 0, but check anyway */
 269         if (intel_encoder->type != INTEL_OUTPUT_ANALOG)
 270                 return false;
 271
 272         return intel_ddc_probe(intel_encoder);
 273 }
 274
 275 static enum drm_connector_status
 276 intel_crt_load_detect(struct drm_crtc *crtc, struct intel_encoder *intel_encoder)
 277 {
 278         struct drm_encoder *encoder = &intel_encoder->enc;
 279         struct drm_device *dev = encoder->dev;
 280         struct drm_i915_private *dev_priv = dev->dev_private;
 281         struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 282         uint32_t pipe = intel_crtc->pipe;
 283         uint32_t save_bclrpat;
 284         uint32_t save_vtotal;
 285         uint32_t vtotal, vactive;
 286         uint32_t vsample;
 287         uint32_t vblank, vblank_start, vblank_end;
 288         uint32_t dsl;
 289         uint32_t bclrpat_reg;
 290         uint32_t vtotal_reg;
 291         uint32_t vblank_reg;
 292         uint32_t vsync_reg;
 293         uint32_t pipeconf_reg;
 294         uint32_t pipe_dsl_reg;
 295         uint8_t st00;
 296         enum drm_connector_status status;
 297
 298         if (pipe == 0) {
 299                 bclrpat_reg = BCLRPAT_A;
 300                 vtotal_reg = VTOTAL_A;
 301                 vblank_reg = VBLANK_A;
 302                 vsync_reg = VSYNC_A;
 303                 pipeconf_reg = PIPEACONF;
 304                 pipe_dsl_reg = PIPEADSL;
 305         } else {
 306                 bclrpat_reg = BCLRPAT_B;
 307                 vtotal_reg = VTOTAL_B;
 308                 vblank_reg = VBLANK_B;
 309                 vsync_reg = VSYNC_B;
 310                 pipeconf_reg = PIPEBCONF;
 311                 pipe_dsl_reg = PIPEBDSL;
 312         }
 313
 314         save_bclrpat = I915_READ(bclrpat_reg);
 315         save_vtotal = I915_READ(vtotal_reg);
 316         vblank = I915_READ(vblank_reg);
 317
 318         vtotal = ((save_vtotal >> 16) & 0xfff) + 1;
 319         vactive = (save_vtotal & 0x7ff) + 1;
 320
 321         vblank_start = (vblank & 0xfff) + 1;
 322         vblank_end = ((vblank >> 16) & 0xfff) + 1;
 323
 324         /* Set the border color to purple. */
 325         I915_WRITE(bclrpat_reg, 0x500050);
 326
 327         if (IS_I9XX(dev)) {
 328                 uint32_t pipeconf = I915_READ(pipeconf_reg);
 329                 I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);
 330                 /* Wait for next Vblank to substitue
 331                  * border color for Color info */
 332                 intel_wait_for_vblank(dev, pipe);
 333                 st00 = I915_READ8(VGA_MSR_WRITE);
 334                 status = ((st00 & (1 << 4)) != 0) ?
 335                         connector_status_connected :
 336                         connector_status_disconnected;
 337
 338                 I915_WRITE(pipeconf_reg, pipeconf);
 339         } else {
 340                 bool restore_vblank = false;
 341                 int count, detect;
 342
 343                 /*
 344                 * If there isn't any border, add some.
 345                 * Yes, this will flicker
 346                 */
 347                 if (vblank_start <= vactive && vblank_end >= vtotal) {
 348                         uint32_t vsync = I915_READ(vsync_reg);
 349                         uint32_t vsync_start = (vsync & 0xffff) + 1;
 350
 351                         vblank_start = vsync_start;
 352                         I915_WRITE(vblank_reg,
 353                                    (vblank_start - 1) |
 354                                    ((vblank_end - 1) << 16));
 355                         restore_vblank = true;
 356                 }
 357                 /* sample in the vertical border, selecting the larger one */
 358                 if (vblank_start - vactive >= vtotal - vblank_end)
 359                         vsample = (vblank_start + vactive) >> 1;
 360                 else
 361                         vsample = (vtotal + vblank_end) >> 1;
 362
 363                 /*
 364                  * Wait for the border to be displayed
 365                  */
 366                 while (I915_READ(pipe_dsl_reg) >= vactive)
 367                         ;
 368                 while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample)
 369                         ;
 370                 /*
 371                  * Watch ST00 for an entire scanline
 372                  */
 373                 detect = 0;
 374                 count = 0;
 375                 do {
 376                         count++;
 377                         /* Read the ST00 VGA status register */
 378                         st00 = I915_READ8(VGA_MSR_WRITE);
 379                         if (st00 & (1 << 4))
 380                                 detect++;
 381                 } while ((I915_READ(pipe_dsl_reg) == dsl));
 382
 383                 /* restore vblank if necessary */
 384                 if (restore_vblank)
 385                         I915_WRITE(vblank_reg, vblank);
 386                 /*
 387                  * If more than 3/4 of the scanline detected a monitor,
 388                  * then it is assumed to be present. This works even on i830,
 389                  * where there isn't any way to force the border color across
 390                  * the screen
 391                  */
 392                 status = detect * 4 > count * 3 ?
 393                          connector_status_connected :
 394                          connector_status_disconnected;
 395         }
 396
 397         /* Restore previous settings */
 398         I915_WRITE(bclrpat_reg, save_bclrpat);
 399
 400         return status;
 401 }
 402
 403 static enum drm_connector_status
 404 intel_crt_detect(struct drm_connector *connector, bool force)
 405 {
 406         struct drm_device *dev = connector->dev;
 407         struct drm_encoder *encoder = intel_attached_encoder(connector);
 408         struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
 409         struct drm_crtc *crtc;
 410         int dpms_mode;
 411         enum drm_connector_status status;
 412
 413         if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) {
 414                 if (intel_crt_detect_hotplug(connector))
 415                         return connector_status_connected;
 416                 else
 417                         return connector_status_disconnected;
 418         }
 419
 420         if (intel_crt_detect_ddc(encoder))
 421                 return connector_status_connected;
 422
 423         if (!force)
 424                 return connector->status;
 425
 426         /* for pre-945g platforms use load detect */
 427         if (encoder->crtc && encoder->crtc->enabled) {
 428                 status = intel_crt_load_detect(encoder->crtc, intel_encoder);
 429         } else {
 430                 crtc = intel_get_load_detect_pipe(intel_encoder, connector,
 431                                                   NULL, &dpms_mode);
 432                 if (crtc) {
 433                         status = intel_crt_load_detect(crtc, intel_encoder);
 434                         intel_release_load_detect_pipe(intel_encoder,
 435                                                        connector, dpms_mode);
 436                 } else
 437                         status = connector_status_unknown;
 438         }
 439
 440         return status;
 441 }
 442
 443 static void intel_crt_destroy(struct drm_connector *connector)
 444 {
 445         drm_sysfs_connector_remove(connector);
 446         drm_connector_cleanup(connector);
 447         kfree(connector);
 448 }
 449
 450 static int intel_crt_get_modes(struct drm_connector *connector)
 451 {
 452         int ret;
 453         struct drm_encoder *encoder = intel_attached_encoder(connector);
 454         struct intel_encoder *intel_encoder = enc_to_intel_encoder(encoder);
 455         struct i2c_adapter *ddc_bus;
 456         struct drm_device *dev = connector->dev;
 457
 458
 459         ret = intel_ddc_get_modes(connector, intel_encoder->ddc_bus);
 460         if (ret || !IS_G4X(dev))
 461                 goto end;
 462
 463         /* Try to probe digital port for output in DVI-I -> VGA mode. */
 464         ddc_bus = intel_i2c_create(connector->dev, GPIOD, "CRTDDC_D");
 465
 466         if (!ddc_bus) {
 467                 dev_printk(KERN_ERR, &connector->dev->pdev->dev,
 468                            "DDC bus registration failed for CRTDDC_D.\n");
 469                 goto end;
 470         }
 471         /* Try to get modes by GPIOD port */
 472         ret = intel_ddc_get_modes(connector, ddc_bus);
 473         intel_i2c_destroy(ddc_bus);
 474
 475 end:
 476         return ret;
 477
 478 }
 479
 480 static int intel_crt_set_property(struct drm_connector *connector,
 481                                   struct drm_property *property,
 482                                   uint64_t value)
 483 {
 484         return 0;
 485 }
 486
 487 /*
 488  * Routines for controlling stuff on the analog port
 489  */
 490
 491 static const struct drm_encoder_helper_funcs intel_crt_helper_funcs = {
 492         .dpms = intel_crt_dpms,
 493         .mode_fixup = intel_crt_mode_fixup,
 494         .prepare = intel_encoder_prepare,
 495         .commit = intel_encoder_commit,
 496         .mode_set = intel_crt_mode_set,
 497 };
 498
 499 static const struct drm_connector_funcs intel_crt_connector_funcs = {
 500         .dpms = drm_helper_connector_dpms,
 501         .detect = intel_crt_detect,
 502         .fill_modes = drm_helper_probe_single_connector_modes,
 503         .destroy = intel_crt_destroy,
 504         .set_property = intel_crt_set_property,
 505 };
 506
 507 static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {
 508         .mode_valid = intel_crt_mode_valid,
 509         .get_modes = intel_crt_get_modes,
 510         .best_encoder = intel_attached_encoder,
 511 };
 512
 513 static const struct drm_encoder_funcs intel_crt_enc_funcs = {
 514         .destroy = intel_encoder_destroy,
 515 };
 516
 517 void intel_crt_init(struct drm_device *dev)
 518 {
 519         struct drm_connector *connector;
 520         struct intel_encoder *intel_encoder;
 521         struct intel_connector *intel_connector;
 522         struct drm_i915_private *dev_priv = dev->dev_private;
 523         u32 i2c_reg;
 524
 525         intel_encoder = kzalloc(sizeof(struct intel_encoder), GFP_KERNEL);
 526         if (!intel_encoder)
 527                 return;
 528
 529         intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
 530         if (!intel_connector) {
 531                 kfree(intel_encoder);
 532                 return;
 533         }
 534
 535         connector = &intel_connector->base;
 536         drm_connector_init(dev, &intel_connector->base,
 537                            &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
 538
 539         drm_encoder_init(dev, &intel_encoder->enc, &intel_crt_enc_funcs,
 540                          DRM_MODE_ENCODER_DAC);
 541
 542         drm_mode_connector_attach_encoder(&intel_connector->base,
 543                                           &intel_encoder->enc);
 544
 545         /* Set up the DDC bus. */
 546         if (HAS_PCH_SPLIT(dev))
 547                 i2c_reg = PCH_GPIOA;
 548         else {
 549                 i2c_reg = GPIOA;
 550                 /* Use VBT information for CRT DDC if available */
 551                 if (dev_priv->crt_ddc_bus != 0)
 552                         i2c_reg = dev_priv->crt_ddc_bus;
 553         }
 554         intel_encoder->ddc_bus = intel_i2c_create(dev, i2c_reg, "CRTDDC_A");
 555         if (!intel_encoder->ddc_bus) {
 556                 dev_printk(KERN_ERR, &dev->pdev->dev, "DDC bus registration "
 557                            "failed.\n");
 558                 return;
 559         }
 560
 561         intel_encoder->type = INTEL_OUTPUT_ANALOG;
 562         intel_encoder->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
 563                                    (1 << INTEL_ANALOG_CLONE_BIT) |
 564                                    (1 << INTEL_SDVO_LVDS_CLONE_BIT);
 565         intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
 566         connector->interlace_allowed = 1;
 567         connector->doublescan_allowed = 0;
 568
 569         drm_encoder_helper_add(&intel_encoder->enc, &intel_crt_helper_funcs);
 570         drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 571
 572         drm_sysfs_connector_add(connector);
 573
 574         if (I915_HAS_HOTPLUG(dev))
 575                 connector->polled = DRM_CONNECTOR_POLL_HPD;
 576         else
 577                 connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 578
 579         dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
 580 }