drivers/char/vme_scc.c

   1 /*
   2  * drivers/char/vme_scc.c: MVME147, MVME162, BVME6000 SCC serial ports
   3  * implementation.
   4  * Copyright 1999 Richard Hirst <richard@sleepie.demon.co.uk>
   5  *
   6  * Based on atari_SCC.c which was
   7  *   Copyright 1994-95 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
   8  *   Partially based on PC-Linux serial.c by Linus Torvalds and Theodore Ts'o
   9  *
  10  * This file is subject to the terms and conditions of the GNU General Public
  11  * License.  See the file COPYING in the main directory of this archive
  12  * for more details.
  13  *
  14  */
  15
  16 #include <linux/module.h>
  17 #include <linux/kdev_t.h>
  18 #include <asm/io.h>
  19 #include <linux/kernel.h>
  20 #include <linux/ioport.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/errno.h>
  23 #include <linux/tty.h>
  24 #include <linux/tty_flip.h>
  25 #include <linux/mm.h>
  26 #include <linux/serial.h>
  27 #include <linux/fcntl.h>
  28 #include <linux/major.h>
  29 #include <linux/delay.h>
  30 #include <linux/slab.h>
  31 #include <linux/miscdevice.h>
  32 #include <linux/console.h>
  33 #include <linux/init.h>
  34 #include <asm/setup.h>
  35 #include <asm/bootinfo.h>
  36
  37 #ifdef CONFIG_MVME147_SCC
  38 #include <asm/mvme147hw.h>
  39 #endif
  40 #ifdef CONFIG_MVME162_SCC
  41 #include <asm/mvme16xhw.h>
  42 #endif
  43 #ifdef CONFIG_BVME6000_SCC
  44 #include <asm/bvme6000hw.h>
  45 #endif
  46
  47 #include <linux/generic_serial.h>
  48 #include "scc.h"
  49
  50
  51 #define CHANNEL_A       0
  52 #define CHANNEL_B       1
  53
  54 #define SCC_MINOR_BASE  64
  55
  56 /* Shadows for all SCC write registers */
  57 static unsigned char scc_shadow[2][16];
  58
  59 /* Location to access for SCC register access delay */
  60 static volatile unsigned char *scc_del = NULL;
  61
  62 /* To keep track of STATUS_REG state for detection of Ext/Status int source */
  63 static unsigned char scc_last_status_reg[2];
  64
  65 /***************************** Prototypes *****************************/
  66
  67 /* Function prototypes */
  68 static void scc_disable_tx_interrupts(void * ptr);
  69 static void scc_enable_tx_interrupts(void * ptr);
  70 static void scc_disable_rx_interrupts(void * ptr);
  71 static void scc_enable_rx_interrupts(void * ptr);
  72 static int  scc_carrier_raised(struct tty_port *port);
  73 static void scc_shutdown_port(void * ptr);
  74 static int scc_set_real_termios(void  *ptr);
  75 static void scc_hungup(void  *ptr);
  76 static void scc_close(void  *ptr);
  77 static int scc_chars_in_buffer(void * ptr);
  78 static int scc_open(struct tty_struct * tty, struct file * filp);
  79 static int scc_ioctl(struct tty_struct * tty, struct file * filp,
  80                      unsigned int cmd, unsigned long arg);
  81 static void scc_throttle(struct tty_struct *tty);
  82 static void scc_unthrottle(struct tty_struct *tty);
  83 static irqreturn_t scc_tx_int(int irq, void *data);
  84 static irqreturn_t scc_rx_int(int irq, void *data);
  85 static irqreturn_t scc_stat_int(int irq, void *data);
  86 static irqreturn_t scc_spcond_int(int irq, void *data);
  87 static void scc_setsignals(struct scc_port *port, int dtr, int rts);
  88 static int scc_break_ctl(struct tty_struct *tty, int break_state);
  89
  90 static struct tty_driver *scc_driver;
  91
  92 static struct scc_port scc_ports[2];
  93
  94 /*---------------------------------------------------------------------------
  95  * Interface from generic_serial.c back here
  96  *--------------------------------------------------------------------------*/
  97
  98 static struct real_driver scc_real_driver = {
  99         scc_disable_tx_interrupts,
 100         scc_enable_tx_interrupts,
 101         scc_disable_rx_interrupts,
 102         scc_enable_rx_interrupts,
 103         scc_shutdown_port,
 104         scc_set_real_termios,
 105         scc_chars_in_buffer,
 106         scc_close,
 107         scc_hungup,
 108         NULL
 109 };
 110
 111
 112 static const struct tty_operations scc_ops = {
 113         .open   = scc_open,
 114         .close = gs_close,
 115         .write = gs_write,
 116         .put_char = gs_put_char,
 117         .flush_chars = gs_flush_chars,
 118         .write_room = gs_write_room,
 119         .chars_in_buffer = gs_chars_in_buffer,
 120         .flush_buffer = gs_flush_buffer,
 121         .ioctl = scc_ioctl,
 122         .throttle = scc_throttle,
 123         .unthrottle = scc_unthrottle,
 124         .set_termios = gs_set_termios,
 125         .stop = gs_stop,
 126         .start = gs_start,
 127         .hangup = gs_hangup,
 128         .break_ctl = scc_break_ctl,
 129 };
 130
 131 static const struct tty_port_operations scc_port_ops = {
 132         .carrier_raised = scc_carrier_raised,
 133 };
 134
 135 /*----------------------------------------------------------------------------
 136  * vme_scc_init() and support functions
 137  *---------------------------------------------------------------------------*/
 138
 139 static int __init scc_init_drivers(void)
 140 {
 141         int error;
 142
 143         scc_driver = alloc_tty_driver(2);
 144         if (!scc_driver)
 145                 return -ENOMEM;
 146         scc_driver->owner = THIS_MODULE;
 147         scc_driver->driver_name = "scc";
 148         scc_driver->name = "ttyS";
 149         scc_driver->major = TTY_MAJOR;
 150         scc_driver->minor_start = SCC_MINOR_BASE;
 151         scc_driver->type = TTY_DRIVER_TYPE_SERIAL;
 152         scc_driver->subtype = SERIAL_TYPE_NORMAL;
 153         scc_driver->init_termios = tty_std_termios;
 154         scc_driver->init_termios.c_cflag =
 155           B9600 | CS8 | CREAD | HUPCL | CLOCAL;
 156         scc_driver->init_termios.c_ispeed = 9600;
 157         scc_driver->init_termios.c_ospeed = 9600;
 158         scc_driver->flags = TTY_DRIVER_REAL_RAW;
 159         tty_set_operations(scc_driver, &scc_ops);
 160
 161         if ((error = tty_register_driver(scc_driver))) {
 162                 printk(KERN_ERR "scc: Couldn't register scc driver, error = %d\n",
 163                        error);
 164                 put_tty_driver(scc_driver);
 165                 return 1;
 166         }
 167
 168         return 0;
 169 }
 170
 171
 172 /* ports[] array is indexed by line no (i.e. [0] for ttyS0, [1] for ttyS1).
 173  */
 174
 175 static void __init scc_init_portstructs(void)
 176 {
 177         struct scc_port *port;
 178         int i;
 179
 180         for (i = 0; i < 2; i++) {
 181                 port = scc_ports + i;
 182                 tty_port_init(&port->gs.port);
 183                 port->gs.port.ops = &scc_port_ops;
 184                 port->gs.magic = SCC_MAGIC;
 185                 port->gs.close_delay = HZ/2;
 186                 port->gs.closing_wait = 30 * HZ;
 187                 port->gs.rd = &scc_real_driver;
 188 #ifdef NEW_WRITE_LOCKING
 189                 port->gs.port_write_mutex = MUTEX;
 190 #endif
 191                 init_waitqueue_head(&port->gs.port.open_wait);
 192                 init_waitqueue_head(&port->gs.port.close_wait);
 193         }
 194 }
 195
 196
 197 #ifdef CONFIG_MVME147_SCC
 198 static int __init mvme147_scc_init(void)
 199 {
 200         struct scc_port *port;
 201         int error;
 202
 203         printk(KERN_INFO "SCC: MVME147 Serial Driver\n");
 204         /* Init channel A */
 205         port = &scc_ports[0];
 206         port->channel = CHANNEL_A;
 207         port->ctrlp = (volatile unsigned char *)M147_SCC_A_ADDR;
 208         port->datap = port->ctrlp + 1;
 209         port->port_a = &scc_ports[0];
 210         port->port_b = &scc_ports[1];
 211         error = request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
 212                             "SCC-A TX", port);
 213         if (error)
 214                 goto fail;
 215         error = request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
 216                             "SCC-A status", port);
 217         if (error)
 218                 goto fail_free_a_tx;
 219         error = request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
 220                             "SCC-A RX", port);
 221         if (error)
 222                 goto fail_free_a_stat;
 223         error = request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int,
 224                             IRQF_DISABLED, "SCC-A special cond", port);
 225         if (error)
 226                 goto fail_free_a_rx;
 227
 228         {
 229                 SCC_ACCESS_INIT(port);
 230
 231                 /* disable interrupts for this channel */
 232                 SCCwrite(INT_AND_DMA_REG, 0);
 233                 /* Set the interrupt vector */
 234                 SCCwrite(INT_VECTOR_REG, MVME147_IRQ_SCC_BASE);
 235                 /* Interrupt parameters: vector includes status, status low */
 236                 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
 237                 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
 238         }
 239
 240         /* Init channel B */
 241         port = &scc_ports[1];
 242         port->channel = CHANNEL_B;
 243         port->ctrlp = (volatile unsigned char *)M147_SCC_B_ADDR;
 244         port->datap = port->ctrlp + 1;
 245         port->port_a = &scc_ports[0];
 246         port->port_b = &scc_ports[1];
 247         error = request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
 248                             "SCC-B TX", port);
 249         if (error)
 250                 goto fail_free_a_spcond;
 251         error = request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
 252                             "SCC-B status", port);
 253         if (error)
 254                 goto fail_free_b_tx;
 255         error = request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
 256                             "SCC-B RX", port);
 257         if (error)
 258                 goto fail_free_b_stat;
 259         error = request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int,
 260                             IRQF_DISABLED, "SCC-B special cond", port);
 261         if (error)
 262                 goto fail_free_b_rx;
 263
 264         {
 265                 SCC_ACCESS_INIT(port);
 266
 267                 /* disable interrupts for this channel */
 268                 SCCwrite(INT_AND_DMA_REG, 0);
 269         }
 270
 271         /* Ensure interrupts are enabled in the PCC chip */
 272         m147_pcc->serial_cntrl=PCC_LEVEL_SERIAL|PCC_INT_ENAB;
 273
 274         /* Initialise the tty driver structures and register */
 275         scc_init_portstructs();
 276         scc_init_drivers();
 277
 278         return 0;
 279
 280 fail_free_b_rx:
 281         free_irq(MVME147_IRQ_SCCB_RX, port);
 282 fail_free_b_stat:
 283         free_irq(MVME147_IRQ_SCCB_STAT, port);
 284 fail_free_b_tx:
 285         free_irq(MVME147_IRQ_SCCB_TX, port);
 286 fail_free_a_spcond:
 287         free_irq(MVME147_IRQ_SCCA_SPCOND, port);
 288 fail_free_a_rx:
 289         free_irq(MVME147_IRQ_SCCA_RX, port);
 290 fail_free_a_stat:
 291         free_irq(MVME147_IRQ_SCCA_STAT, port);
 292 fail_free_a_tx:
 293         free_irq(MVME147_IRQ_SCCA_TX, port);
 294 fail:
 295         return error;
 296 }
 297 #endif
 298
 299
 300 #ifdef CONFIG_MVME162_SCC
 301 static int __init mvme162_scc_init(void)
 302 {
 303         struct scc_port *port;
 304         int error;
 305
 306         if (!(mvme16x_config & MVME16x_CONFIG_GOT_SCCA))
 307                 return (-ENODEV);
 308
 309         printk(KERN_INFO "SCC: MVME162 Serial Driver\n");
 310         /* Init channel A */
 311         port = &scc_ports[0];
 312         port->channel = CHANNEL_A;
 313         port->ctrlp = (volatile unsigned char *)MVME_SCC_A_ADDR;
 314         port->datap = port->ctrlp + 2;
 315         port->port_a = &scc_ports[0];
 316         port->port_b = &scc_ports[1];
 317         error = request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
 318                             "SCC-A TX", port);
 319         if (error)
 320                 goto fail;
 321         error = request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
 322                             "SCC-A status", port);
 323         if (error)
 324                 goto fail_free_a_tx;
 325         error = request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
 326                             "SCC-A RX", port);
 327         if (error)
 328                 goto fail_free_a_stat;
 329         error = request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int,
 330                             IRQF_DISABLED, "SCC-A special cond", port);
 331         if (error)
 332                 goto fail_free_a_rx;
 333
 334         {
 335                 SCC_ACCESS_INIT(port);
 336
 337                 /* disable interrupts for this channel */
 338                 SCCwrite(INT_AND_DMA_REG, 0);
 339                 /* Set the interrupt vector */
 340                 SCCwrite(INT_VECTOR_REG, MVME162_IRQ_SCC_BASE);
 341                 /* Interrupt parameters: vector includes status, status low */
 342                 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
 343                 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
 344         }
 345
 346         /* Init channel B */
 347         port = &scc_ports[1];
 348         port->channel = CHANNEL_B;
 349         port->ctrlp = (volatile unsigned char *)MVME_SCC_B_ADDR;
 350         port->datap = port->ctrlp + 2;
 351         port->port_a = &scc_ports[0];
 352         port->port_b = &scc_ports[1];
 353         error = request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
 354                             "SCC-B TX", port);
 355         if (error)
 356                 goto fail_free_a_spcond;
 357         error = request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
 358                             "SCC-B status", port);
 359         if (error)
 360                 goto fail_free_b_tx;
 361         error = request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
 362                             "SCC-B RX", port);
 363         if (error)
 364                 goto fail_free_b_stat;
 365         error = request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int,
 366                             IRQF_DISABLED, "SCC-B special cond", port);
 367         if (error)
 368                 goto fail_free_b_rx;
 369
 370         {
 371                 SCC_ACCESS_INIT(port);  /* Either channel will do */
 372
 373                 /* disable interrupts for this channel */
 374                 SCCwrite(INT_AND_DMA_REG, 0);
 375         }
 376
 377         /* Ensure interrupts are enabled in the MC2 chip */
 378         *(volatile char *)0xfff4201d = 0x14;
 379
 380         /* Initialise the tty driver structures and register */
 381         scc_init_portstructs();
 382         scc_init_drivers();
 383
 384         return 0;
 385
 386 fail_free_b_rx:
 387         free_irq(MVME162_IRQ_SCCB_RX, port);
 388 fail_free_b_stat:
 389         free_irq(MVME162_IRQ_SCCB_STAT, port);
 390 fail_free_b_tx:
 391         free_irq(MVME162_IRQ_SCCB_TX, port);
 392 fail_free_a_spcond:
 393         free_irq(MVME162_IRQ_SCCA_SPCOND, port);
 394 fail_free_a_rx:
 395         free_irq(MVME162_IRQ_SCCA_RX, port);
 396 fail_free_a_stat:
 397         free_irq(MVME162_IRQ_SCCA_STAT, port);
 398 fail_free_a_tx:
 399         free_irq(MVME162_IRQ_SCCA_TX, port);
 400 fail:
 401         return error;
 402 }
 403 #endif
 404
 405
 406 #ifdef CONFIG_BVME6000_SCC
 407 static int __init bvme6000_scc_init(void)
 408 {
 409         struct scc_port *port;
 410         int error;
 411
 412         printk(KERN_INFO "SCC: BVME6000 Serial Driver\n");
 413         /* Init channel A */
 414         port = &scc_ports[0];
 415         port->channel = CHANNEL_A;
 416         port->ctrlp = (volatile unsigned char *)BVME_SCC_A_ADDR;
 417         port->datap = port->ctrlp + 4;
 418         port->port_a = &scc_ports[0];
 419         port->port_b = &scc_ports[1];
 420         error = request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
 421                             "SCC-A TX", port);
 422         if (error)
 423                 goto fail;
 424         error = request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
 425                             "SCC-A status", port);
 426         if (error)
 427                 goto fail_free_a_tx;
 428         error = request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
 429                             "SCC-A RX", port);
 430         if (error)
 431                 goto fail_free_a_stat;
 432         error = request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int,
 433                             IRQF_DISABLED, "SCC-A special cond", port);
 434         if (error)
 435                 goto fail_free_a_rx;
 436
 437         {
 438                 SCC_ACCESS_INIT(port);
 439
 440                 /* disable interrupts for this channel */
 441                 SCCwrite(INT_AND_DMA_REG, 0);
 442                 /* Set the interrupt vector */
 443                 SCCwrite(INT_VECTOR_REG, BVME_IRQ_SCC_BASE);
 444                 /* Interrupt parameters: vector includes status, status low */
 445                 SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT);
 446                 SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB);
 447         }
 448
 449         /* Init channel B */
 450         port = &scc_ports[1];
 451         port->channel = CHANNEL_B;
 452         port->ctrlp = (volatile unsigned char *)BVME_SCC_B_ADDR;
 453         port->datap = port->ctrlp + 4;
 454         port->port_a = &scc_ports[0];
 455         port->port_b = &scc_ports[1];
 456         error = request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
 457                             "SCC-B TX", port);
 458         if (error)
 459                 goto fail_free_a_spcond;
 460         error = request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
 461                             "SCC-B status", port);
 462         if (error)
 463                 goto fail_free_b_tx;
 464         error = request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
 465                             "SCC-B RX", port);
 466         if (error)
 467                 goto fail_free_b_stat;
 468         error = request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int,
 469                             IRQF_DISABLED, "SCC-B special cond", port);
 470         if (error)
 471                 goto fail_free_b_rx;
 472
 473         {
 474                 SCC_ACCESS_INIT(port);  /* Either channel will do */
 475
 476                 /* disable interrupts for this channel */
 477                 SCCwrite(INT_AND_DMA_REG, 0);
 478         }
 479
 480         /* Initialise the tty driver structures and register */
 481         scc_init_portstructs();
 482         scc_init_drivers();
 483
 484         return 0;
 485
 486 fail:
 487         free_irq(BVME_IRQ_SCCA_STAT, port);
 488 fail_free_a_tx:
 489         free_irq(BVME_IRQ_SCCA_RX, port);
 490 fail_free_a_stat:
 491         free_irq(BVME_IRQ_SCCA_SPCOND, port);
 492 fail_free_a_rx:
 493         free_irq(BVME_IRQ_SCCB_TX, port);
 494 fail_free_a_spcond:
 495         free_irq(BVME_IRQ_SCCB_STAT, port);
 496 fail_free_b_tx:
 497         free_irq(BVME_IRQ_SCCB_RX, port);
 498 fail_free_b_stat:
 499         free_irq(BVME_IRQ_SCCB_SPCOND, port);
 500 fail_free_b_rx:
 501         return error;
 502 }
 503 #endif
 504
 505
 506 static int __init vme_scc_init(void)
 507 {
 508         int res = -ENODEV;
 509
 510 #ifdef CONFIG_MVME147_SCC
 511         if (MACH_IS_MVME147)
 512                 res = mvme147_scc_init();
 513 #endif
 514 #ifdef CONFIG_MVME162_SCC
 515         if (MACH_IS_MVME16x)
 516                 res = mvme162_scc_init();
 517 #endif
 518 #ifdef CONFIG_BVME6000_SCC
 519         if (MACH_IS_BVME6000)
 520                 res = bvme6000_scc_init();
 521 #endif
 522         return res;
 523 }
 524
 525 module_init(vme_scc_init);
 526
 527
 528 /*---------------------------------------------------------------------------
 529  * Interrupt handlers
 530  *--------------------------------------------------------------------------*/
 531
 532 static irqreturn_t scc_rx_int(int irq, void *data)
 533 {
 534         unsigned char   ch;
 535         struct scc_port *port = data;
 536         struct tty_struct *tty = port->gs.port.tty;
 537         SCC_ACCESS_INIT(port);
 538
 539         ch = SCCread_NB(RX_DATA_REG);
 540         if (!tty) {
 541                 printk(KERN_WARNING "scc_rx_int with NULL tty!\n");
 542                 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 543                 return IRQ_HANDLED;
 544         }
 545         tty_insert_flip_char(tty, ch, 0);
 546
 547         /* Check if another character is already ready; in that case, the
 548          * spcond_int() function must be used, because this character may have an
 549          * error condition that isn't signalled by the interrupt vector used!
 550          */
 551         if (SCCread(INT_PENDING_REG) &
 552             (port->channel == CHANNEL_A ? IPR_A_RX : IPR_B_RX)) {
 553                 scc_spcond_int (irq, data);
 554                 return IRQ_HANDLED;
 555         }
 556
 557         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 558
 559         tty_flip_buffer_push(tty);
 560         return IRQ_HANDLED;
 561 }
 562
 563
 564 static irqreturn_t scc_spcond_int(int irq, void *data)
 565 {
 566         struct scc_port *port = data;
 567         struct tty_struct *tty = port->gs.port.tty;
 568         unsigned char   stat, ch, err;
 569         int             int_pending_mask = port->channel == CHANNEL_A ?
 570                                            IPR_A_RX : IPR_B_RX;
 571         SCC_ACCESS_INIT(port);
 572
 573         if (!tty) {
 574                 printk(KERN_WARNING "scc_spcond_int with NULL tty!\n");
 575                 SCCwrite(COMMAND_REG, CR_ERROR_RESET);
 576                 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 577                 return IRQ_HANDLED;
 578         }
 579         do {
 580                 stat = SCCread(SPCOND_STATUS_REG);
 581                 ch = SCCread_NB(RX_DATA_REG);
 582
 583                 if (stat & SCSR_RX_OVERRUN)
 584                         err = TTY_OVERRUN;
 585                 else if (stat & SCSR_PARITY_ERR)
 586                         err = TTY_PARITY;
 587                 else if (stat & SCSR_CRC_FRAME_ERR)
 588                         err = TTY_FRAME;
 589                 else
 590                         err = 0;
 591
 592                 tty_insert_flip_char(tty, ch, err);
 593
 594                 /* ++TeSche: *All* errors have to be cleared manually,
 595                  * else the condition persists for the next chars
 596                  */
 597                 if (err)
 598                   SCCwrite(COMMAND_REG, CR_ERROR_RESET);
 599
 600         } while(SCCread(INT_PENDING_REG) & int_pending_mask);
 601
 602         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 603
 604         tty_flip_buffer_push(tty);
 605         return IRQ_HANDLED;
 606 }
 607
 608
 609 static irqreturn_t scc_tx_int(int irq, void *data)
 610 {
 611         struct scc_port *port = data;
 612         SCC_ACCESS_INIT(port);
 613
 614         if (!port->gs.port.tty) {
 615                 printk(KERN_WARNING "scc_tx_int with NULL tty!\n");
 616                 SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
 617                 SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET);
 618                 SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 619                 return IRQ_HANDLED;
 620         }
 621         while ((SCCread_NB(STATUS_REG) & SR_TX_BUF_EMPTY)) {
 622                 if (port->x_char) {
 623                         SCCwrite(TX_DATA_REG, port->x_char);
 624                         port->x_char = 0;
 625                 }
 626                 else if ((port->gs.xmit_cnt <= 0) ||
 627                          port->gs.port.tty->stopped ||
 628                          port->gs.port.tty->hw_stopped)
 629                         break;
 630                 else {
 631                         SCCwrite(TX_DATA_REG, port->gs.xmit_buf[port->gs.xmit_tail++]);
 632                         port->gs.xmit_tail = port->gs.xmit_tail & (SERIAL_XMIT_SIZE-1);
 633                         if (--port->gs.xmit_cnt <= 0)
 634                                 break;
 635                 }
 636         }
 637         if ((port->gs.xmit_cnt <= 0) || port->gs.port.tty->stopped ||
 638             port->gs.port.tty->hw_stopped) {
 639                 /* disable tx interrupts */
 640                 SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
 641                 SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET);   /* disable tx_int on next tx underrun? */
 642                 port->gs.port.flags &= ~GS_TX_INTEN;
 643         }
 644         if (port->gs.port.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars)
 645                 tty_wakeup(port->gs.port.tty);
 646
 647         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 648         return IRQ_HANDLED;
 649 }
 650
 651
 652 static irqreturn_t scc_stat_int(int irq, void *data)
 653 {
 654         struct scc_port *port = data;
 655         unsigned channel = port->channel;
 656         unsigned char   last_sr, sr, changed;
 657         SCC_ACCESS_INIT(port);
 658
 659         last_sr = scc_last_status_reg[channel];
 660         sr = scc_last_status_reg[channel] = SCCread_NB(STATUS_REG);
 661         changed = last_sr ^ sr;
 662
 663         if (changed & SR_DCD) {
 664                 port->c_dcd = !!(sr & SR_DCD);
 665                 if (!(port->gs.port.flags & ASYNC_CHECK_CD))
 666                         ;       /* Don't report DCD changes */
 667                 else if (port->c_dcd) {
 668                         wake_up_interruptible(&port->gs.port.open_wait);
 669                 }
 670                 else {
 671                         if (port->gs.port.tty)
 672                                 tty_hangup (port->gs.port.tty);
 673                 }
 674         }
 675         SCCwrite(COMMAND_REG, CR_EXTSTAT_RESET);
 676         SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET);
 677         return IRQ_HANDLED;
 678 }
 679
 680
 681 /*---------------------------------------------------------------------------
 682  * generic_serial.c callback funtions
 683  *--------------------------------------------------------------------------*/
 684
 685 static void scc_disable_tx_interrupts(void *ptr)
 686 {
 687         struct scc_port *port = ptr;
 688         unsigned long   flags;
 689         SCC_ACCESS_INIT(port);
 690
 691         local_irq_save(flags);
 692         SCCmod(INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0);
 693         port->gs.port.flags &= ~GS_TX_INTEN;
 694         local_irq_restore(flags);
 695 }
 696
 697
 698 static void scc_enable_tx_interrupts(void *ptr)
 699 {
 700         struct scc_port *port = ptr;
 701         unsigned long   flags;
 702         SCC_ACCESS_INIT(port);
 703
 704         local_irq_save(flags);
 705         SCCmod(INT_AND_DMA_REG, 0xff, IDR_TX_INT_ENAB);
 706         /* restart the transmitter */
 707         scc_tx_int (0, port);
 708         local_irq_restore(flags);
 709 }
 710
 711
 712 static void scc_disable_rx_interrupts(void *ptr)
 713 {
 714         struct scc_port *port = ptr;
 715         unsigned long   flags;
 716         SCC_ACCESS_INIT(port);
 717
 718         local_irq_save(flags);
 719         SCCmod(INT_AND_DMA_REG,
 720             ~(IDR_RX_INT_MASK|IDR_PARERR_AS_SPCOND|IDR_EXTSTAT_INT_ENAB), 0);
 721         local_irq_restore(flags);
 722 }
 723
 724
 725 static void scc_enable_rx_interrupts(void *ptr)
 726 {
 727         struct scc_port *port = ptr;
 728         unsigned long   flags;
 729         SCC_ACCESS_INIT(port);
 730
 731         local_irq_save(flags);
 732         SCCmod(INT_AND_DMA_REG, 0xff,
 733                 IDR_EXTSTAT_INT_ENAB|IDR_PARERR_AS_SPCOND|IDR_RX_INT_ALL);
 734         local_irq_restore(flags);
 735 }
 736
 737
 738 static int scc_carrier_raised(struct tty_port *port)
 739 {
 740         struct scc_port *sc = container_of(port, struct scc_port, gs.port);
 741         unsigned channel = sc->channel;
 742
 743         return !!(scc_last_status_reg[channel] & SR_DCD);
 744 }
 745
 746
 747 static void scc_shutdown_port(void *ptr)
 748 {
 749         struct scc_port *port = ptr;
 750
 751         port->gs.port.flags &= ~ GS_ACTIVE;
 752         if (port->gs.port.tty && (port->gs.port.tty->termios->c_cflag & HUPCL)) {
 753                 scc_setsignals (port, 0, 0);
 754         }
 755 }
 756
 757
 758 static int scc_set_real_termios (void *ptr)
 759 {
 760         /* the SCC has char sizes 5,7,6,8 in that order! */
 761         static int chsize_map[4] = { 0, 2, 1, 3 };
 762         unsigned cflag, baud, chsize, channel, brgval = 0;
 763         unsigned long flags;
 764         struct scc_port *port = ptr;
 765         SCC_ACCESS_INIT(port);
 766
 767         if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0;
 768
 769         channel = port->channel;
 770
 771         if (channel == CHANNEL_A)
 772                 return 0;               /* Settings controlled by boot PROM */
 773
 774         cflag  = port->gs.port.tty->termios->c_cflag;
 775         baud = port->gs.baud;
 776         chsize = (cflag & CSIZE) >> 4;
 777
 778         if (baud == 0) {
 779                 /* speed == 0 -> drop DTR */
 780                 local_irq_save(flags);
 781                 SCCmod(TX_CTRL_REG, ~TCR_DTR, 0);
 782                 local_irq_restore(flags);
 783                 return 0;
 784         }
 785         else if ((MACH_IS_MVME16x && (baud < 50 || baud > 38400)) ||
 786                  (MACH_IS_MVME147 && (baud < 50 || baud > 19200)) ||
 787                  (MACH_IS_BVME6000 &&(baud < 50 || baud > 76800))) {
 788                 printk(KERN_NOTICE "SCC: Bad speed requested, %d\n", baud);
 789                 return 0;
 790         }
 791
 792         if (cflag & CLOCAL)
 793                 port->gs.port.flags &= ~ASYNC_CHECK_CD;
 794         else
 795                 port->gs.port.flags |= ASYNC_CHECK_CD;
 796
 797 #ifdef CONFIG_MVME147_SCC
 798         if (MACH_IS_MVME147)
 799                 brgval = (M147_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2;
 800 #endif
 801 #ifdef CONFIG_MVME162_SCC
 802         if (MACH_IS_MVME16x)
 803                 brgval = (MVME_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2;
 804 #endif
 805 #ifdef CONFIG_BVME6000_SCC
 806         if (MACH_IS_BVME6000)
 807                 brgval = (BVME_SCC_RTxC + baud/2) / (16 * 2 * baud) - 2;
 808 #endif
 809         /* Now we have all parameters and can go to set them: */
 810         local_irq_save(flags);
 811
 812         /* receiver's character size and auto-enables */
 813         SCCmod(RX_CTRL_REG, ~(RCR_CHSIZE_MASK|RCR_AUTO_ENAB_MODE),
 814                         (chsize_map[chsize] << 6) |
 815                         ((cflag & CRTSCTS) ? RCR_AUTO_ENAB_MODE : 0));
 816         /* parity and stop bits (both, Tx and Rx), clock mode never changes */
 817         SCCmod (AUX1_CTRL_REG,
 818                 ~(A1CR_PARITY_MASK | A1CR_MODE_MASK),
 819                 ((cflag & PARENB
 820                   ? (cflag & PARODD ? A1CR_PARITY_ODD : A1CR_PARITY_EVEN)
 821                   : A1CR_PARITY_NONE)
 822                  | (cflag & CSTOPB ? A1CR_MODE_ASYNC_2 : A1CR_MODE_ASYNC_1)));
 823         /* sender's character size, set DTR for valid baud rate */
 824         SCCmod(TX_CTRL_REG, ~TCR_CHSIZE_MASK, chsize_map[chsize] << 5 | TCR_DTR);
 825         /* clock sources never change */
 826         /* disable BRG before changing the value */
 827         SCCmod(DPLL_CTRL_REG, ~DCR_BRG_ENAB, 0);
 828         /* BRG value */
 829         SCCwrite(TIMER_LOW_REG, brgval & 0xff);
 830         SCCwrite(TIMER_HIGH_REG, (brgval >> 8) & 0xff);
 831         /* BRG enable, and clock source never changes */
 832         SCCmod(DPLL_CTRL_REG, 0xff, DCR_BRG_ENAB);
 833
 834         local_irq_restore(flags);
 835
 836         return 0;
 837 }
 838
 839
 840 static int scc_chars_in_buffer (void *ptr)
 841 {
 842         struct scc_port *port = ptr;
 843         SCC_ACCESS_INIT(port);
 844
 845         return (SCCread (SPCOND_STATUS_REG) & SCSR_ALL_SENT) ? 0  : 1;
 846 }
 847
 848
 849 /* Comment taken from sx.c (2.4.0):
 850    I haven't the foggiest why the decrement use count has to happen
 851    here. The whole linux serial drivers stuff needs to be redesigned.
 852    My guess is that this is a hack to minimize the impact of a bug
 853    elsewhere. Thinking about it some more. (try it sometime) Try
 854    running minicom on a serial port that is driven by a modularized
 855    driver. Have the modem hangup. Then remove the driver module. Then
 856    exit minicom.  I expect an "oops".  -- REW */
 857
 858 static void scc_hungup(void *ptr)
 859 {
 860         scc_disable_tx_interrupts(ptr);
 861         scc_disable_rx_interrupts(ptr);
 862 }
 863
 864
 865 static void scc_close(void *ptr)
 866 {
 867         scc_disable_tx_interrupts(ptr);
 868         scc_disable_rx_interrupts(ptr);
 869 }
 870
 871
 872 /*---------------------------------------------------------------------------
 873  * Internal support functions
 874  *--------------------------------------------------------------------------*/
 875
 876 static void scc_setsignals(struct scc_port *port, int dtr, int rts)
 877 {
 878         unsigned long flags;
 879         unsigned char t;
 880         SCC_ACCESS_INIT(port);
 881
 882         local_irq_save(flags);
 883         t = SCCread(TX_CTRL_REG);
 884         if (dtr >= 0) t = dtr? (t | TCR_DTR): (t & ~TCR_DTR);
 885         if (rts >= 0) t = rts? (t | TCR_RTS): (t & ~TCR_RTS);
 886         SCCwrite(TX_CTRL_REG, t);
 887         local_irq_restore(flags);
 888 }
 889
 890
 891 static void scc_send_xchar(struct tty_struct *tty, char ch)
 892 {
 893         struct scc_port *port = tty->driver_data;
 894
 895         port->x_char = ch;
 896         if (ch)
 897                 scc_enable_tx_interrupts(port);
 898 }
 899
 900
 901 /*---------------------------------------------------------------------------
 902  * Driver entrypoints referenced from above
 903  *--------------------------------------------------------------------------*/
 904
 905 static int scc_open (struct tty_struct * tty, struct file * filp)
 906 {
 907         int line = tty->index;
 908         int retval;
 909         struct scc_port *port = &scc_ports[line];
 910         int i, channel = port->channel;
 911         unsigned long   flags;
 912         SCC_ACCESS_INIT(port);
 913 #if defined(CONFIG_MVME162_SCC) || defined(CONFIG_MVME147_SCC)
 914         static const struct {
 915                 unsigned reg, val;
 916         } mvme_init_tab[] = {
 917                 /* Values for MVME162 and MVME147 */
 918                 /* no parity, 1 stop bit, async, 1:16 */
 919                 { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 },
 920                 /* parity error is special cond, ints disabled, no DMA */
 921                 { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB },
 922                 /* Rx 8 bits/char, no auto enable, Rx off */
 923                 { RX_CTRL_REG, RCR_CHSIZE_8 },
 924                 /* DTR off, Tx 8 bits/char, RTS off, Tx off */
 925                 { TX_CTRL_REG, TCR_CHSIZE_8 },
 926                 /* special features off */
 927                 { AUX2_CTRL_REG, 0 },
 928                 { CLK_CTRL_REG, CCR_RXCLK_BRG | CCR_TXCLK_BRG },
 929                 { DPLL_CTRL_REG, DCR_BRG_ENAB | DCR_BRG_USE_PCLK },
 930                 /* Start Rx */
 931                 { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 },
 932                 /* Start Tx */
 933                 { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 },
 934                 /* Ext/Stat ints: DCD only */
 935                 { INT_CTRL_REG, ICR_ENAB_DCD_INT },
 936                 /* Reset Ext/Stat ints */
 937                 { COMMAND_REG, CR_EXTSTAT_RESET },
 938                 /* ...again */
 939                 { COMMAND_REG, CR_EXTSTAT_RESET },
 940         };
 941 #endif
 942 #if defined(CONFIG_BVME6000_SCC)
 943         static const struct {
 944                 unsigned reg, val;
 945         } bvme_init_tab[] = {
 946                 /* Values for BVME6000 */
 947                 /* no parity, 1 stop bit, async, 1:16 */
 948                 { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 },
 949                 /* parity error is special cond, ints disabled, no DMA */
 950                 { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB },
 951                 /* Rx 8 bits/char, no auto enable, Rx off */
 952                 { RX_CTRL_REG, RCR_CHSIZE_8 },
 953                 /* DTR off, Tx 8 bits/char, RTS off, Tx off */
 954                 { TX_CTRL_REG, TCR_CHSIZE_8 },
 955                 /* special features off */
 956                 { AUX2_CTRL_REG, 0 },
 957                 { CLK_CTRL_REG, CCR_RTxC_XTAL | CCR_RXCLK_BRG | CCR_TXCLK_BRG },
 958                 { DPLL_CTRL_REG, DCR_BRG_ENAB },
 959                 /* Start Rx */
 960                 { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 },
 961                 /* Start Tx */
 962                 { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 },
 963                 /* Ext/Stat ints: DCD only */
 964                 { INT_CTRL_REG, ICR_ENAB_DCD_INT },
 965                 /* Reset Ext/Stat ints */
 966                 { COMMAND_REG, CR_EXTSTAT_RESET },
 967                 /* ...again */
 968                 { COMMAND_REG, CR_EXTSTAT_RESET },
 969         };
 970 #endif
 971         if (!(port->gs.port.flags & ASYNC_INITIALIZED)) {
 972                 local_irq_save(flags);
 973 #if defined(CONFIG_MVME147_SCC) || defined(CONFIG_MVME162_SCC)
 974                 if (MACH_IS_MVME147 || MACH_IS_MVME16x) {
 975                         for (i = 0; i < ARRAY_SIZE(mvme_init_tab); ++i)
 976                                 SCCwrite(mvme_init_tab[i].reg, mvme_init_tab[i].val);
 977                 }
 978 #endif
 979 #if defined(CONFIG_BVME6000_SCC)
 980                 if (MACH_IS_BVME6000) {
 981                         for (i = 0; i < ARRAY_SIZE(bvme_init_tab); ++i)
 982                                 SCCwrite(bvme_init_tab[i].reg, bvme_init_tab[i].val);
 983                 }
 984 #endif
 985
 986                 /* remember status register for detection of DCD and CTS changes */
 987                 scc_last_status_reg[channel] = SCCread(STATUS_REG);
 988
 989                 port->c_dcd = 0;        /* Prevent initial 1->0 interrupt */
 990                 scc_setsignals (port, 1,1);
 991                 local_irq_restore(flags);
 992         }
 993
 994         tty->driver_data = port;
 995         port->gs.port.tty = tty;
 996         port->gs.port.count++;
 997         retval = gs_init_port(&port->gs);
 998         if (retval) {
 999                 port->gs.port.count--;
1000                 return retval;
1001         }
1002         port->gs.port.flags |= GS_ACTIVE;
1003         retval = gs_block_til_ready(port, filp);
1004
1005         if (retval) {
1006                 port->gs.port.count--;
1007                 return retval;
1008         }
1009
1010         port->c_dcd = tty_port_carrier_raised(&port->gs.port);
1011
1012         scc_enable_rx_interrupts(port);
1013
1014         return 0;
1015 }
1016
1017
1018 static void scc_throttle (struct tty_struct * tty)
1019 {
1020         struct scc_port *port = tty->driver_data;
1021         unsigned long   flags;
1022         SCC_ACCESS_INIT(port);
1023
1024         if (tty->termios->c_cflag & CRTSCTS) {
1025                 local_irq_save(flags);
1026                 SCCmod(TX_CTRL_REG, ~TCR_RTS, 0);
1027                 local_irq_restore(flags);
1028         }
1029         if (I_IXOFF(tty))
1030                 scc_send_xchar(tty, STOP_CHAR(tty));
1031 }
1032
1033
1034 static void scc_unthrottle (struct tty_struct * tty)
1035 {
1036         struct scc_port *port = tty->driver_data;
1037         unsigned long   flags;
1038         SCC_ACCESS_INIT(port);
1039
1040         if (tty->termios->c_cflag & CRTSCTS) {
1041                 local_irq_save(flags);
1042                 SCCmod(TX_CTRL_REG, 0xff, TCR_RTS);
1043                 local_irq_restore(flags);
1044         }
1045         if (I_IXOFF(tty))
1046                 scc_send_xchar(tty, START_CHAR(tty));
1047 }
1048
1049
1050 static int scc_ioctl(struct tty_struct *tty, struct file *file,
1051                      unsigned int cmd, unsigned long arg)
1052 {
1053         return -ENOIOCTLCMD;
1054 }
1055
1056
1057 static int scc_break_ctl(struct tty_struct *tty, int break_state)
1058 {
1059         struct scc_port *port = tty->driver_data;
1060         unsigned long   flags;
1061         SCC_ACCESS_INIT(port);
1062
1063         local_irq_save(flags);
1064         SCCmod(TX_CTRL_REG, ~TCR_SEND_BREAK,
1065                         break_state ? TCR_SEND_BREAK : 0);
1066         local_irq_restore(flags);
1067         return 0;
1068 }
1069
1070
1071 /*---------------------------------------------------------------------------
1072  * Serial console stuff...
1073  *--------------------------------------------------------------------------*/
1074
1075 #define scc_delay() do { __asm__ __volatile__ (" nop; nop"); } while (0)
1076
1077 static void scc_ch_write (char ch)
1078 {
1079         volatile char *p = NULL;
1080
1081 #ifdef CONFIG_MVME147_SCC
1082         if (MACH_IS_MVME147)
1083                 p = (volatile char *)M147_SCC_A_ADDR;
1084 #endif
1085 #ifdef CONFIG_MVME162_SCC
1086         if (MACH_IS_MVME16x)
1087                 p = (volatile char *)MVME_SCC_A_ADDR;
1088 #endif
1089 #ifdef CONFIG_BVME6000_SCC
1090         if (MACH_IS_BVME6000)
1091                 p = (volatile char *)BVME_SCC_A_ADDR;
1092 #endif
1093
1094         do {
1095                 scc_delay();
1096         }
1097         while (!(*p & 4));
1098         scc_delay();
1099         *p = 8;
1100         scc_delay();
1101         *p = ch;
1102 }
1103
1104 /* The console must be locked when we get here. */
1105
1106 static void scc_console_write (struct console *co, const char *str, unsigned count)
1107 {
1108         unsigned long   flags;
1109
1110         local_irq_save(flags);
1111
1112         while (count--)
1113         {
1114                 if (*str == '\n')
1115                         scc_ch_write ('\r');
1116                 scc_ch_write (*str++);
1117         }
1118         local_irq_restore(flags);
1119 }
1120
1121 static struct tty_driver *scc_console_device(struct console *c, int *index)
1122 {
1123         *index = c->index;
1124         return scc_driver;
1125 }
1126
1127 static struct console sercons = {
1128         .name           = "ttyS",
1129         .write          = scc_console_write,
1130         .device         = scc_console_device,
1131         .flags          = CON_PRINTBUFFER,
1132         .index          = -1,
1133 };
1134
1135
1136 static int __init vme_scc_console_init(void)
1137 {
1138         if (vme_brdtype == VME_TYPE_MVME147 ||
1139                         vme_brdtype == VME_TYPE_MVME162 ||
1140                         vme_brdtype == VME_TYPE_MVME172 ||
1141                         vme_brdtype == VME_TYPE_BVME4000 ||
1142                         vme_brdtype == VME_TYPE_BVME6000)
1143                 register_console(&sercons);
1144         return 0;
1145 }
1146 console_initcall(vme_scc_console_init);