drivers/char/ipmi/ipmi_si_intf.c

   1 /*
   2  * ipmi_si.c
   3  *
   4  * The interface to the IPMI driver for the system interfaces (KCS, SMIC,
   5  * BT).
   6  *
   7  * Author: MontaVista Software, Inc.
   8  *         Corey Minyard <minyard@mvista.com>
   9  *         source@mvista.com
  10  *
  11  * Copyright 2002 MontaVista Software Inc.
  12  * Copyright 2006 IBM Corp., Christian Krafft <krafft@de.ibm.com>
  13  *
  14  *  This program is free software; you can redistribute it and/or modify it
  15  *  under the terms of the GNU General Public License as published by the
  16  *  Free Software Foundation; either version 2 of the License, or (at your
  17  *  option) any later version.
  18  *
  19  *
  20  *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
  21  *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
  22  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  23  *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  24  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
  25  *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
  26  *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  27  *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  28  *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  29  *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  30  *
  31  *  You should have received a copy of the GNU General Public License along
  32  *  with this program; if not, write to the Free Software Foundation, Inc.,
  33  *  675 Mass Ave, Cambridge, MA 02139, USA.
  34  */
  35
  36 /*
  37  * This file holds the "policy" for the interface to the SMI state
  38  * machine.  It does the configuration, handles timers and interrupts,
  39  * and drives the real SMI state machine.
  40  */
  41
  42 #include <linux/module.h>
  43 #include <linux/moduleparam.h>
  44 #include <asm/system.h>
  45 #include <linux/sched.h>
  46 #include <linux/timer.h>
  47 #include <linux/errno.h>
  48 #include <linux/spinlock.h>
  49 #include <linux/slab.h>
  50 #include <linux/delay.h>
  51 #include <linux/list.h>
  52 #include <linux/pci.h>
  53 #include <linux/ioport.h>
  54 #include <linux/notifier.h>
  55 #include <linux/mutex.h>
  56 #include <linux/kthread.h>
  57 #include <asm/irq.h>
  58 #include <linux/interrupt.h>
  59 #include <linux/rcupdate.h>
  60 #include <linux/ipmi_smi.h>
  61 #include <asm/io.h>
  62 #include "ipmi_si_sm.h"
  63 #include <linux/init.h>
  64 #include <linux/dmi.h>
  65 #include <linux/string.h>
  66 #include <linux/ctype.h>
  67 #include <linux/pnp.h>
  68
  69 #ifdef CONFIG_PPC_OF
  70 #include <linux/of_device.h>
  71 #include <linux/of_platform.h>
  72 #endif
  73
  74 #define PFX "ipmi_si: "
  75
  76 /* Measure times between events in the driver. */
  77 #undef DEBUG_TIMING
  78
  79 /* Call every 10 ms. */
  80 #define SI_TIMEOUT_TIME_USEC    10000
  81 #define SI_USEC_PER_JIFFY       (1000000/HZ)
  82 #define SI_TIMEOUT_JIFFIES      (SI_TIMEOUT_TIME_USEC/SI_USEC_PER_JIFFY)
  83 #define SI_SHORT_TIMEOUT_USEC  250 /* .25ms when the SM request a
  84                                       short timeout */
  85
  86 enum si_intf_state {
  87         SI_NORMAL,
  88         SI_GETTING_FLAGS,
  89         SI_GETTING_EVENTS,
  90         SI_CLEARING_FLAGS,
  91         SI_CLEARING_FLAGS_THEN_SET_IRQ,
  92         SI_GETTING_MESSAGES,
  93         SI_ENABLE_INTERRUPTS1,
  94         SI_ENABLE_INTERRUPTS2,
  95         SI_DISABLE_INTERRUPTS1,
  96         SI_DISABLE_INTERRUPTS2
  97         /* FIXME - add watchdog stuff. */
  98 };
  99
 100 /* Some BT-specific defines we need here. */
 101 #define IPMI_BT_INTMASK_REG             2
 102 #define IPMI_BT_INTMASK_CLEAR_IRQ_BIT   2
 103 #define IPMI_BT_INTMASK_ENABLE_IRQ_BIT  1
 104
 105 enum si_type {
 106     SI_KCS, SI_SMIC, SI_BT
 107 };
 108 static char *si_to_str[] = { "kcs", "smic", "bt" };
 109
 110 enum ipmi_addr_src {
 111         SI_INVALID = 0, SI_HOTMOD, SI_HARDCODED, SI_SPMI, SI_ACPI, SI_SMBIOS,
 112         SI_PCI, SI_DEVICETREE, SI_DEFAULT
 113 };
 114 static char *ipmi_addr_src_to_str[] = { NULL, "hotmod", "hardcoded", "SPMI",
 115                                         "ACPI", "SMBIOS", "PCI",
 116                                         "device-tree", "default" };
 117
 118 #define DEVICE_NAME "ipmi_si"
 119
 120 static struct platform_driver ipmi_driver = {
 121         .driver = {
 122                 .name = DEVICE_NAME,
 123                 .bus = &platform_bus_type
 124         }
 125 };
 126
 127
 128 /*
 129  * Indexes into stats[] in smi_info below.
 130  */
 131 enum si_stat_indexes {
 132         /*
 133          * Number of times the driver requested a timer while an operation
 134          * was in progress.
 135          */
 136         SI_STAT_short_timeouts = 0,
 137
 138         /*
 139          * Number of times the driver requested a timer while nothing was in
 140          * progress.
 141          */
 142         SI_STAT_long_timeouts,
 143
 144         /* Number of times the interface was idle while being polled. */
 145         SI_STAT_idles,
 146
 147         /* Number of interrupts the driver handled. */
 148         SI_STAT_interrupts,
 149
 150         /* Number of time the driver got an ATTN from the hardware. */
 151         SI_STAT_attentions,
 152
 153         /* Number of times the driver requested flags from the hardware. */
 154         SI_STAT_flag_fetches,
 155
 156         /* Number of times the hardware didn't follow the state machine. */
 157         SI_STAT_hosed_count,
 158
 159         /* Number of completed messages. */
 160         SI_STAT_complete_transactions,
 161
 162         /* Number of IPMI events received from the hardware. */
 163         SI_STAT_events,
 164
 165         /* Number of watchdog pretimeouts. */
 166         SI_STAT_watchdog_pretimeouts,
 167
 168         /* Number of asyncronous messages received. */
 169         SI_STAT_incoming_messages,
 170
 171
 172         /* This *must* remain last, add new values above this. */
 173         SI_NUM_STATS
 174 };
 175
 176 struct smi_info {
 177         int                    intf_num;
 178         ipmi_smi_t             intf;
 179         struct si_sm_data      *si_sm;
 180         struct si_sm_handlers  *handlers;
 181         enum si_type           si_type;
 182         spinlock_t             si_lock;
 183         spinlock_t             msg_lock;
 184         struct list_head       xmit_msgs;
 185         struct list_head       hp_xmit_msgs;
 186         struct ipmi_smi_msg    *curr_msg;
 187         enum si_intf_state     si_state;
 188
 189         /*
 190          * Used to handle the various types of I/O that can occur with
 191          * IPMI
 192          */
 193         struct si_sm_io io;
 194         int (*io_setup)(struct smi_info *info);
 195         void (*io_cleanup)(struct smi_info *info);
 196         int (*irq_setup)(struct smi_info *info);
 197         void (*irq_cleanup)(struct smi_info *info);
 198         unsigned int io_size;
 199         enum ipmi_addr_src addr_source; /* ACPI, PCI, SMBIOS, hardcode, etc. */
 200         void (*addr_source_cleanup)(struct smi_info *info);
 201         void *addr_source_data;
 202
 203         /*
 204          * Per-OEM handler, called from handle_flags().  Returns 1
 205          * when handle_flags() needs to be re-run or 0 indicating it
 206          * set si_state itself.
 207          */
 208         int (*oem_data_avail_handler)(struct smi_info *smi_info);
 209
 210         /*
 211          * Flags from the last GET_MSG_FLAGS command, used when an ATTN
 212          * is set to hold the flags until we are done handling everything
 213          * from the flags.
 214          */
 215 #define RECEIVE_MSG_AVAIL       0x01
 216 #define EVENT_MSG_BUFFER_FULL   0x02
 217 #define WDT_PRE_TIMEOUT_INT     0x08
 218 #define OEM0_DATA_AVAIL     0x20
 219 #define OEM1_DATA_AVAIL     0x40
 220 #define OEM2_DATA_AVAIL     0x80
 221 #define OEM_DATA_AVAIL      (OEM0_DATA_AVAIL | \
 222                              OEM1_DATA_AVAIL | \
 223                              OEM2_DATA_AVAIL)
 224         unsigned char       msg_flags;
 225
 226         /* Does the BMC have an event buffer? */
 227         char                has_event_buffer;
 228
 229         /*
 230          * If set to true, this will request events the next time the
 231          * state machine is idle.
 232          */
 233         atomic_t            req_events;
 234
 235         /*
 236          * If true, run the state machine to completion on every send
 237          * call.  Generally used after a panic to make sure stuff goes
 238          * out.
 239          */
 240         int                 run_to_completion;
 241
 242         /* The I/O port of an SI interface. */
 243         int                 port;
 244
 245         /*
 246          * The space between start addresses of the two ports.  For
 247          * instance, if the first port is 0xca2 and the spacing is 4, then
 248          * the second port is 0xca6.
 249          */
 250         unsigned int        spacing;
 251
 252         /* zero if no irq; */
 253         int                 irq;
 254
 255         /* The timer for this si. */
 256         struct timer_list   si_timer;
 257
 258         /* The time (in jiffies) the last timeout occurred at. */
 259         unsigned long       last_timeout_jiffies;
 260
 261         /* Used to gracefully stop the timer without race conditions. */
 262         atomic_t            stop_operation;
 263
 264         /*
 265          * The driver will disable interrupts when it gets into a
 266          * situation where it cannot handle messages due to lack of
 267          * memory.  Once that situation clears up, it will re-enable
 268          * interrupts.
 269          */
 270         int interrupt_disabled;
 271
 272         /* From the get device id response... */
 273         struct ipmi_device_id device_id;
 274
 275         /* Driver model stuff. */
 276         struct device *dev;
 277         struct platform_device *pdev;
 278
 279         /*
 280          * True if we allocated the device, false if it came from
 281          * someplace else (like PCI).
 282          */
 283         int dev_registered;
 284
 285         /* Slave address, could be reported from DMI. */
 286         unsigned char slave_addr;
 287
 288         /* Counters and things for the proc filesystem. */
 289         atomic_t stats[SI_NUM_STATS];
 290
 291         struct task_struct *thread;
 292
 293         struct list_head link;
 294 };
 295
 296 #define smi_inc_stat(smi, stat) \
 297         atomic_inc(&(smi)->stats[SI_STAT_ ## stat])
 298 #define smi_get_stat(smi, stat) \
 299         ((unsigned int) atomic_read(&(smi)->stats[SI_STAT_ ## stat]))
 300
 301 #define SI_MAX_PARMS 4
 302
 303 static int force_kipmid[SI_MAX_PARMS];
 304 static int num_force_kipmid;
 305 #ifdef CONFIG_PCI
 306 static int pci_registered;
 307 #endif
 308 #ifdef CONFIG_PPC_OF
 309 static int of_registered;
 310 #endif
 311
 312 static unsigned int kipmid_max_busy_us[SI_MAX_PARMS];
 313 static int num_max_busy_us;
 314
 315 static int unload_when_empty = 1;
 316
 317 static int add_smi(struct smi_info *smi);
 318 static int try_smi_init(struct smi_info *smi);
 319 static void cleanup_one_si(struct smi_info *to_clean);
 320
 321 static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list);
 322 static int register_xaction_notifier(struct notifier_block *nb)
 323 {
 324         return atomic_notifier_chain_register(&xaction_notifier_list, nb);
 325 }
 326
 327 static void deliver_recv_msg(struct smi_info *smi_info,
 328                              struct ipmi_smi_msg *msg)
 329 {
 330         /* Deliver the message to the upper layer with the lock
 331            released. */
 332
 333         if (smi_info->run_to_completion) {
 334                 ipmi_smi_msg_received(smi_info->intf, msg);
 335         } else {
 336                 spin_unlock(&(smi_info->si_lock));
 337                 ipmi_smi_msg_received(smi_info->intf, msg);
 338                 spin_lock(&(smi_info->si_lock));
 339         }
 340 }
 341
 342 static void return_hosed_msg(struct smi_info *smi_info, int cCode)
 343 {
 344         struct ipmi_smi_msg *msg = smi_info->curr_msg;
 345
 346         if (cCode < 0 || cCode > IPMI_ERR_UNSPECIFIED)
 347                 cCode = IPMI_ERR_UNSPECIFIED;
 348         /* else use it as is */
 349
 350         /* Make it a reponse */
 351         msg->rsp[0] = msg->data[0] | 4;
 352         msg->rsp[1] = msg->data[1];
 353         msg->rsp[2] = cCode;
 354         msg->rsp_size = 3;
 355
 356         smi_info->curr_msg = NULL;
 357         deliver_recv_msg(smi_info, msg);
 358 }
 359
 360 static enum si_sm_result start_next_msg(struct smi_info *smi_info)
 361 {
 362         int              rv;
 363         struct list_head *entry = NULL;
 364 #ifdef DEBUG_TIMING
 365         struct timeval t;
 366 #endif
 367
 368         /*
 369          * No need to save flags, we aleady have interrupts off and we
 370          * already hold the SMI lock.
 371          */
 372         if (!smi_info->run_to_completion)
 373                 spin_lock(&(smi_info->msg_lock));
 374
 375         /* Pick the high priority queue first. */
 376         if (!list_empty(&(smi_info->hp_xmit_msgs))) {
 377                 entry = smi_info->hp_xmit_msgs.next;
 378         } else if (!list_empty(&(smi_info->xmit_msgs))) {
 379                 entry = smi_info->xmit_msgs.next;
 380         }
 381
 382         if (!entry) {
 383                 smi_info->curr_msg = NULL;
 384                 rv = SI_SM_IDLE;
 385         } else {
 386                 int err;
 387
 388                 list_del(entry);
 389                 smi_info->curr_msg = list_entry(entry,
 390                                                 struct ipmi_smi_msg,
 391                                                 link);
 392 #ifdef DEBUG_TIMING
 393                 do_gettimeofday(&t);
 394                 printk(KERN_DEBUG "**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec);
 395 #endif
 396                 err = atomic_notifier_call_chain(&xaction_notifier_list,
 397                                 0, smi_info);
 398                 if (err & NOTIFY_STOP_MASK) {
 399                         rv = SI_SM_CALL_WITHOUT_DELAY;
 400                         goto out;
 401                 }
 402                 err = smi_info->handlers->start_transaction(
 403                         smi_info->si_sm,
 404                         smi_info->curr_msg->data,
 405                         smi_info->curr_msg->data_size);
 406                 if (err)
 407                         return_hosed_msg(smi_info, err);
 408
 409                 rv = SI_SM_CALL_WITHOUT_DELAY;
 410         }
 411  out:
 412         if (!smi_info->run_to_completion)
 413                 spin_unlock(&(smi_info->msg_lock));
 414
 415         return rv;
 416 }
 417
 418 static void start_enable_irq(struct smi_info *smi_info)
 419 {
 420         unsigned char msg[2];
 421
 422         /*
 423          * If we are enabling interrupts, we have to tell the
 424          * BMC to use them.
 425          */
 426         msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 427         msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
 428
 429         smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
 430         smi_info->si_state = SI_ENABLE_INTERRUPTS1;
 431 }
 432
 433 static void start_disable_irq(struct smi_info *smi_info)
 434 {
 435         unsigned char msg[2];
 436
 437         msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 438         msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
 439
 440         smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
 441         smi_info->si_state = SI_DISABLE_INTERRUPTS1;
 442 }
 443
 444 static void start_clear_flags(struct smi_info *smi_info)
 445 {
 446         unsigned char msg[3];
 447
 448         /* Make sure the watchdog pre-timeout flag is not set at startup. */
 449         msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 450         msg[1] = IPMI_CLEAR_MSG_FLAGS_CMD;
 451         msg[2] = WDT_PRE_TIMEOUT_INT;
 452
 453         smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
 454         smi_info->si_state = SI_CLEARING_FLAGS;
 455 }
 456
 457 /*
 458  * When we have a situtaion where we run out of memory and cannot
 459  * allocate messages, we just leave them in the BMC and run the system
 460  * polled until we can allocate some memory.  Once we have some
 461  * memory, we will re-enable the interrupt.
 462  */
 463 static inline void disable_si_irq(struct smi_info *smi_info)
 464 {
 465         if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
 466                 start_disable_irq(smi_info);
 467                 smi_info->interrupt_disabled = 1;
 468                 if (!atomic_read(&smi_info->stop_operation))
 469                         mod_timer(&smi_info->si_timer,
 470                                   jiffies + SI_TIMEOUT_JIFFIES);
 471         }
 472 }
 473
 474 static inline void enable_si_irq(struct smi_info *smi_info)
 475 {
 476         if ((smi_info->irq) && (smi_info->interrupt_disabled)) {
 477                 start_enable_irq(smi_info);
 478                 smi_info->interrupt_disabled = 0;
 479         }
 480 }
 481
 482 static void handle_flags(struct smi_info *smi_info)
 483 {
 484  retry:
 485         if (smi_info->msg_flags & WDT_PRE_TIMEOUT_INT) {
 486                 /* Watchdog pre-timeout */
 487                 smi_inc_stat(smi_info, watchdog_pretimeouts);
 488
 489                 start_clear_flags(smi_info);
 490                 smi_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT;
 491                 spin_unlock(&(smi_info->si_lock));
 492                 ipmi_smi_watchdog_pretimeout(smi_info->intf);
 493                 spin_lock(&(smi_info->si_lock));
 494         } else if (smi_info->msg_flags & RECEIVE_MSG_AVAIL) {
 495                 /* Messages available. */
 496                 smi_info->curr_msg = ipmi_alloc_smi_msg();
 497                 if (!smi_info->curr_msg) {
 498                         disable_si_irq(smi_info);
 499                         smi_info->si_state = SI_NORMAL;
 500                         return;
 501                 }
 502                 enable_si_irq(smi_info);
 503
 504                 smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
 505                 smi_info->curr_msg->data[1] = IPMI_GET_MSG_CMD;
 506                 smi_info->curr_msg->data_size = 2;
 507
 508                 smi_info->handlers->start_transaction(
 509                         smi_info->si_sm,
 510                         smi_info->curr_msg->data,
 511                         smi_info->curr_msg->data_size);
 512                 smi_info->si_state = SI_GETTING_MESSAGES;
 513         } else if (smi_info->msg_flags & EVENT_MSG_BUFFER_FULL) {
 514                 /* Events available. */
 515                 smi_info->curr_msg = ipmi_alloc_smi_msg();
 516                 if (!smi_info->curr_msg) {
 517                         disable_si_irq(smi_info);
 518                         smi_info->si_state = SI_NORMAL;
 519                         return;
 520                 }
 521                 enable_si_irq(smi_info);
 522
 523                 smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
 524                 smi_info->curr_msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD;
 525                 smi_info->curr_msg->data_size = 2;
 526
 527                 smi_info->handlers->start_transaction(
 528                         smi_info->si_sm,
 529                         smi_info->curr_msg->data,
 530                         smi_info->curr_msg->data_size);
 531                 smi_info->si_state = SI_GETTING_EVENTS;
 532         } else if (smi_info->msg_flags & OEM_DATA_AVAIL &&
 533                    smi_info->oem_data_avail_handler) {
 534                 if (smi_info->oem_data_avail_handler(smi_info))
 535                         goto retry;
 536         } else
 537                 smi_info->si_state = SI_NORMAL;
 538 }
 539
 540 static void handle_transaction_done(struct smi_info *smi_info)
 541 {
 542         struct ipmi_smi_msg *msg;
 543 #ifdef DEBUG_TIMING
 544         struct timeval t;
 545
 546         do_gettimeofday(&t);
 547         printk(KERN_DEBUG "**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec);
 548 #endif
 549         switch (smi_info->si_state) {
 550         case SI_NORMAL:
 551                 if (!smi_info->curr_msg)
 552                         break;
 553
 554                 smi_info->curr_msg->rsp_size
 555                         = smi_info->handlers->get_result(
 556                                 smi_info->si_sm,
 557                                 smi_info->curr_msg->rsp,
 558                                 IPMI_MAX_MSG_LENGTH);
 559
 560                 /*
 561                  * Do this here becase deliver_recv_msg() releases the
 562                  * lock, and a new message can be put in during the
 563                  * time the lock is released.
 564                  */
 565                 msg = smi_info->curr_msg;
 566                 smi_info->curr_msg = NULL;
 567                 deliver_recv_msg(smi_info, msg);
 568                 break;
 569
 570         case SI_GETTING_FLAGS:
 571         {
 572                 unsigned char msg[4];
 573                 unsigned int  len;
 574
 575                 /* We got the flags from the SMI, now handle them. */
 576                 len = smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
 577                 if (msg[2] != 0) {
 578                         /* Error fetching flags, just give up for now. */
 579                         smi_info->si_state = SI_NORMAL;
 580                 } else if (len < 4) {
 581                         /*
 582                          * Hmm, no flags.  That's technically illegal, but
 583                          * don't use uninitialized data.
 584                          */
 585                         smi_info->si_state = SI_NORMAL;
 586                 } else {
 587                         smi_info->msg_flags = msg[3];
 588                         handle_flags(smi_info);
 589                 }
 590                 break;
 591         }
 592
 593         case SI_CLEARING_FLAGS:
 594         case SI_CLEARING_FLAGS_THEN_SET_IRQ:
 595         {
 596                 unsigned char msg[3];
 597
 598                 /* We cleared the flags. */
 599                 smi_info->handlers->get_result(smi_info->si_sm, msg, 3);
 600                 if (msg[2] != 0) {
 601                         /* Error clearing flags */
 602                         dev_warn(smi_info->dev,
 603                                  "Error clearing flags: %2.2x\n", msg[2]);
 604                 }
 605                 if (smi_info->si_state == SI_CLEARING_FLAGS_THEN_SET_IRQ)
 606                         start_enable_irq(smi_info);
 607                 else
 608                         smi_info->si_state = SI_NORMAL;
 609                 break;
 610         }
 611
 612         case SI_GETTING_EVENTS:
 613         {
 614                 smi_info->curr_msg->rsp_size
 615                         = smi_info->handlers->get_result(
 616                                 smi_info->si_sm,
 617                                 smi_info->curr_msg->rsp,
 618                                 IPMI_MAX_MSG_LENGTH);
 619
 620                 /*
 621                  * Do this here becase deliver_recv_msg() releases the
 622                  * lock, and a new message can be put in during the
 623                  * time the lock is released.
 624                  */
 625                 msg = smi_info->curr_msg;
 626                 smi_info->curr_msg = NULL;
 627                 if (msg->rsp[2] != 0) {
 628                         /* Error getting event, probably done. */
 629                         msg->done(msg);
 630
 631                         /* Take off the event flag. */
 632                         smi_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL;
 633                         handle_flags(smi_info);
 634                 } else {
 635                         smi_inc_stat(smi_info, events);
 636
 637                         /*
 638                          * Do this before we deliver the message
 639                          * because delivering the message releases the
 640                          * lock and something else can mess with the
 641                          * state.
 642                          */
 643                         handle_flags(smi_info);
 644
 645                         deliver_recv_msg(smi_info, msg);
 646                 }
 647                 break;
 648         }
 649
 650         case SI_GETTING_MESSAGES:
 651         {
 652                 smi_info->curr_msg->rsp_size
 653                         = smi_info->handlers->get_result(
 654                                 smi_info->si_sm,
 655                                 smi_info->curr_msg->rsp,
 656                                 IPMI_MAX_MSG_LENGTH);
 657
 658                 /*
 659                  * Do this here becase deliver_recv_msg() releases the
 660                  * lock, and a new message can be put in during the
 661                  * time the lock is released.
 662                  */
 663                 msg = smi_info->curr_msg;
 664                 smi_info->curr_msg = NULL;
 665                 if (msg->rsp[2] != 0) {
 666                         /* Error getting event, probably done. */
 667                         msg->done(msg);
 668
 669                         /* Take off the msg flag. */
 670                         smi_info->msg_flags &= ~RECEIVE_MSG_AVAIL;
 671                         handle_flags(smi_info);
 672                 } else {
 673                         smi_inc_stat(smi_info, incoming_messages);
 674
 675                         /*
 676                          * Do this before we deliver the message
 677                          * because delivering the message releases the
 678                          * lock and something else can mess with the
 679                          * state.
 680                          */
 681                         handle_flags(smi_info);
 682
 683                         deliver_recv_msg(smi_info, msg);
 684                 }
 685                 break;
 686         }
 687
 688         case SI_ENABLE_INTERRUPTS1:
 689         {
 690                 unsigned char msg[4];
 691
 692                 /* We got the flags from the SMI, now handle them. */
 693                 smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
 694                 if (msg[2] != 0) {
 695                         dev_warn(smi_info->dev, "Could not enable interrupts"
 696                                  ", failed get, using polled mode.\n");
 697                         smi_info->si_state = SI_NORMAL;
 698                 } else {
 699                         msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 700                         msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
 701                         msg[2] = (msg[3] |
 702                                   IPMI_BMC_RCV_MSG_INTR |
 703                                   IPMI_BMC_EVT_MSG_INTR);
 704                         smi_info->handlers->start_transaction(
 705                                 smi_info->si_sm, msg, 3);
 706                         smi_info->si_state = SI_ENABLE_INTERRUPTS2;
 707                 }
 708                 break;
 709         }
 710
 711         case SI_ENABLE_INTERRUPTS2:
 712         {
 713                 unsigned char msg[4];
 714
 715                 /* We got the flags from the SMI, now handle them. */
 716                 smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
 717                 if (msg[2] != 0)
 718                         dev_warn(smi_info->dev, "Could not enable interrupts"
 719                                  ", failed set, using polled mode.\n");
 720                 else
 721                         smi_info->interrupt_disabled = 0;
 722                 smi_info->si_state = SI_NORMAL;
 723                 break;
 724         }
 725
 726         case SI_DISABLE_INTERRUPTS1:
 727         {
 728                 unsigned char msg[4];
 729
 730                 /* We got the flags from the SMI, now handle them. */
 731                 smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
 732                 if (msg[2] != 0) {
 733                         dev_warn(smi_info->dev, "Could not disable interrupts"
 734                                  ", failed get.\n");
 735                         smi_info->si_state = SI_NORMAL;
 736                 } else {
 737                         msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 738                         msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
 739                         msg[2] = (msg[3] &
 740                                   ~(IPMI_BMC_RCV_MSG_INTR |
 741                                     IPMI_BMC_EVT_MSG_INTR));
 742                         smi_info->handlers->start_transaction(
 743                                 smi_info->si_sm, msg, 3);
 744                         smi_info->si_state = SI_DISABLE_INTERRUPTS2;
 745                 }
 746                 break;
 747         }
 748
 749         case SI_DISABLE_INTERRUPTS2:
 750         {
 751                 unsigned char msg[4];
 752
 753                 /* We got the flags from the SMI, now handle them. */
 754                 smi_info->handlers->get_result(smi_info->si_sm, msg, 4);
 755                 if (msg[2] != 0) {
 756                         dev_warn(smi_info->dev, "Could not disable interrupts"
 757                                  ", failed set.\n");
 758                 }
 759                 smi_info->si_state = SI_NORMAL;
 760                 break;
 761         }
 762         }
 763 }
 764
 765 /*
 766  * Called on timeouts and events.  Timeouts should pass the elapsed
 767  * time, interrupts should pass in zero.  Must be called with
 768  * si_lock held and interrupts disabled.
 769  */
 770 static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
 771                                            int time)
 772 {
 773         enum si_sm_result si_sm_result;
 774
 775  restart:
 776         /*
 777          * There used to be a loop here that waited a little while
 778          * (around 25us) before giving up.  That turned out to be
 779          * pointless, the minimum delays I was seeing were in the 300us
 780          * range, which is far too long to wait in an interrupt.  So
 781          * we just run until the state machine tells us something
 782          * happened or it needs a delay.
 783          */
 784         si_sm_result = smi_info->handlers->event(smi_info->si_sm, time);
 785         time = 0;
 786         while (si_sm_result == SI_SM_CALL_WITHOUT_DELAY)
 787                 si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
 788
 789         if (si_sm_result == SI_SM_TRANSACTION_COMPLETE) {
 790                 smi_inc_stat(smi_info, complete_transactions);
 791
 792                 handle_transaction_done(smi_info);
 793                 si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
 794         } else if (si_sm_result == SI_SM_HOSED) {
 795                 smi_inc_stat(smi_info, hosed_count);
 796
 797                 /*
 798                  * Do the before return_hosed_msg, because that
 799                  * releases the lock.
 800                  */
 801                 smi_info->si_state = SI_NORMAL;
 802                 if (smi_info->curr_msg != NULL) {
 803                         /*
 804                          * If we were handling a user message, format
 805                          * a response to send to the upper layer to
 806                          * tell it about the error.
 807                          */
 808                         return_hosed_msg(smi_info, IPMI_ERR_UNSPECIFIED);
 809                 }
 810                 si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0);
 811         }
 812
 813         /*
 814          * We prefer handling attn over new messages.  But don't do
 815          * this if there is not yet an upper layer to handle anything.
 816          */
 817         if (likely(smi_info->intf) && si_sm_result == SI_SM_ATTN) {
 818                 unsigned char msg[2];
 819
 820                 smi_inc_stat(smi_info, attentions);
 821
 822                 /*
 823                  * Got a attn, send down a get message flags to see
 824                  * what's causing it.  It would be better to handle
 825                  * this in the upper layer, but due to the way
 826                  * interrupts work with the SMI, that's not really
 827                  * possible.
 828                  */
 829                 msg[0] = (IPMI_NETFN_APP_REQUEST << 2);
 830                 msg[1] = IPMI_GET_MSG_FLAGS_CMD;
 831
 832                 smi_info->handlers->start_transaction(
 833                         smi_info->si_sm, msg, 2);
 834                 smi_info->si_state = SI_GETTING_FLAGS;
 835                 goto restart;
 836         }
 837
 838         /* If we are currently idle, try to start the next message. */
 839         if (si_sm_result == SI_SM_IDLE) {
 840                 smi_inc_stat(smi_info, idles);
 841
 842                 si_sm_result = start_next_msg(smi_info);
 843                 if (si_sm_result != SI_SM_IDLE)
 844                         goto restart;
 845         }
 846
 847         if ((si_sm_result == SI_SM_IDLE)
 848             && (atomic_read(&smi_info->req_events))) {
 849                 /*
 850                  * We are idle and the upper layer requested that I fetch
 851                  * events, so do so.
 852                  */
 853                 atomic_set(&smi_info->req_events, 0);
 854
 855                 smi_info->curr_msg = ipmi_alloc_smi_msg();
 856                 if (!smi_info->curr_msg)
 857                         goto out;
 858
 859                 smi_info->curr_msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2);
 860                 smi_info->curr_msg->data[1] = IPMI_READ_EVENT_MSG_BUFFER_CMD;
 861                 smi_info->curr_msg->data_size = 2;
 862
 863                 smi_info->handlers->start_transaction(
 864                         smi_info->si_sm,
 865                         smi_info->curr_msg->data,
 866                         smi_info->curr_msg->data_size);
 867                 smi_info->si_state = SI_GETTING_EVENTS;
 868                 goto restart;
 869         }
 870  out:
 871         return si_sm_result;
 872 }
 873
 874 static void sender(void                *send_info,
 875                    struct ipmi_smi_msg *msg,
 876                    int                 priority)
 877 {
 878         struct smi_info   *smi_info = send_info;
 879         enum si_sm_result result;
 880         unsigned long     flags;
 881 #ifdef DEBUG_TIMING
 882         struct timeval    t;
 883 #endif
 884
 885         if (atomic_read(&smi_info->stop_operation)) {
 886                 msg->rsp[0] = msg->data[0] | 4;
 887                 msg->rsp[1] = msg->data[1];
 888                 msg->rsp[2] = IPMI_ERR_UNSPECIFIED;
 889                 msg->rsp_size = 3;
 890                 deliver_recv_msg(smi_info, msg);
 891                 return;
 892         }
 893
 894 #ifdef DEBUG_TIMING
 895         do_gettimeofday(&t);
 896         printk("**Enqueue: %d.%9.9d\n", t.tv_sec, t.tv_usec);
 897 #endif
 898
 899         mod_timer(&smi_info->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
 900
 901         if (smi_info->thread)
 902                 wake_up_process(smi_info->thread);
 903
 904         if (smi_info->run_to_completion) {
 905                 /*
 906                  * If we are running to completion, then throw it in
 907                  * the list and run transactions until everything is
 908                  * clear.  Priority doesn't matter here.
 909                  */
 910
 911                 /*
 912                  * Run to completion means we are single-threaded, no
 913                  * need for locks.
 914                  */
 915                 list_add_tail(&(msg->link), &(smi_info->xmit_msgs));
 916
 917                 result = smi_event_handler(smi_info, 0);
 918                 while (result != SI_SM_IDLE) {
 919                         udelay(SI_SHORT_TIMEOUT_USEC);
 920                         result = smi_event_handler(smi_info,
 921                                                    SI_SHORT_TIMEOUT_USEC);
 922                 }
 923                 return;
 924         }
 925
 926         spin_lock_irqsave(&smi_info->msg_lock, flags);
 927         if (priority > 0)
 928                 list_add_tail(&msg->link, &smi_info->hp_xmit_msgs);
 929         else
 930                 list_add_tail(&msg->link, &smi_info->xmit_msgs);
 931         spin_unlock_irqrestore(&smi_info->msg_lock, flags);
 932
 933         spin_lock_irqsave(&smi_info->si_lock, flags);
 934         if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL)
 935                 start_next_msg(smi_info);
 936         spin_unlock_irqrestore(&smi_info->si_lock, flags);
 937 }
 938
 939 static void set_run_to_completion(void *send_info, int i_run_to_completion)
 940 {
 941         struct smi_info   *smi_info = send_info;
 942         enum si_sm_result result;
 943
 944         smi_info->run_to_completion = i_run_to_completion;
 945         if (i_run_to_completion) {
 946                 result = smi_event_handler(smi_info, 0);
 947                 while (result != SI_SM_IDLE) {
 948                         udelay(SI_SHORT_TIMEOUT_USEC);
 949                         result = smi_event_handler(smi_info,
 950                                                    SI_SHORT_TIMEOUT_USEC);
 951                 }
 952         }
 953 }
 954
 955 /*
 956  * Use -1 in the nsec value of the busy waiting timespec to tell that
 957  * we are spinning in kipmid looking for something and not delaying
 958  * between checks
 959  */
 960 static inline void ipmi_si_set_not_busy(struct timespec *ts)
 961 {
 962         ts->tv_nsec = -1;
 963 }
 964 static inline int ipmi_si_is_busy(struct timespec *ts)
 965 {
 966         return ts->tv_nsec != -1;
 967 }
 968
 969 static int ipmi_thread_busy_wait(enum si_sm_result smi_result,
 970                                  const struct smi_info *smi_info,
 971                                  struct timespec *busy_until)
 972 {
 973         unsigned int max_busy_us = 0;
 974
 975         if (smi_info->intf_num < num_max_busy_us)
 976                 max_busy_us = kipmid_max_busy_us[smi_info->intf_num];
 977         if (max_busy_us == 0 || smi_result != SI_SM_CALL_WITH_DELAY)
 978                 ipmi_si_set_not_busy(busy_until);
 979         else if (!ipmi_si_is_busy(busy_until)) {
 980                 getnstimeofday(busy_until);
 981                 timespec_add_ns(busy_until, max_busy_us*NSEC_PER_USEC);
 982         } else {
 983                 struct timespec now;
 984                 getnstimeofday(&now);
 985                 if (unlikely(timespec_compare(&now, busy_until) > 0)) {
 986                         ipmi_si_set_not_busy(busy_until);
 987                         return 0;
 988                 }
 989         }
 990         return 1;
 991 }
 992
 993
 994 /*
 995  * A busy-waiting loop for speeding up IPMI operation.
 996  *
 997  * Lousy hardware makes this hard.  This is only enabled for systems
 998  * that are not BT and do not have interrupts.  It starts spinning
 999  * when an operation is complete or until max_busy tells it to stop
1000  * (if that is enabled).  See the paragraph on kimid_max_busy_us in
1001  * Documentation/IPMI.txt for details.
1002  */
1003 static int ipmi_thread(void *data)
1004 {
1005         struct smi_info *smi_info = data;
1006         unsigned long flags;
1007         enum si_sm_result smi_result;
1008         struct timespec busy_until;
1009
1010         ipmi_si_set_not_busy(&busy_until);
1011         set_user_nice(current, 19);
1012         while (!kthread_should_stop()) {
1013                 int busy_wait;
1014
1015                 spin_lock_irqsave(&(smi_info->si_lock), flags);
1016                 smi_result = smi_event_handler(smi_info, 0);
1017                 spin_unlock_irqrestore(&(smi_info->si_lock), flags);
1018                 busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
1019                                                   &busy_until);
1020                 if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
1021                         ; /* do nothing */
1022                 else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
1023                         schedule();
1024                 else if (smi_result == SI_SM_IDLE)
1025                         schedule_timeout_interruptible(100);
1026                 else
1027                         schedule_timeout_interruptible(1);
1028         }
1029         return 0;
1030 }
1031
1032
1033 static void poll(void *send_info)
1034 {
1035         struct smi_info *smi_info = send_info;
1036         unsigned long flags;
1037
1038         /*
1039          * Make sure there is some delay in the poll loop so we can
1040          * drive time forward and timeout things.
1041          */
1042         udelay(10);
1043         spin_lock_irqsave(&smi_info->si_lock, flags);
1044         smi_event_handler(smi_info, 10);
1045         spin_unlock_irqrestore(&smi_info->si_lock, flags);
1046 }
1047
1048 static void request_events(void *send_info)
1049 {
1050         struct smi_info *smi_info = send_info;
1051
1052         if (atomic_read(&smi_info->stop_operation) ||
1053                                 !smi_info->has_event_buffer)
1054                 return;
1055
1056         atomic_set(&smi_info->req_events, 1);
1057 }
1058
1059 static int initialized;
1060
1061 static void smi_timeout(unsigned long data)
1062 {
1063         struct smi_info   *smi_info = (struct smi_info *) data;
1064         enum si_sm_result smi_result;
1065         unsigned long     flags;
1066         unsigned long     jiffies_now;
1067         long              time_diff;
1068         long              timeout;
1069 #ifdef DEBUG_TIMING
1070         struct timeval    t;
1071 #endif
1072
1073         spin_lock_irqsave(&(smi_info->si_lock), flags);
1074 #ifdef DEBUG_TIMING
1075         do_gettimeofday(&t);
1076         printk(KERN_DEBUG "**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec);
1077 #endif
1078         jiffies_now = jiffies;
1079         time_diff = (((long)jiffies_now - (long)smi_info->last_timeout_jiffies)
1080                      * SI_USEC_PER_JIFFY);
1081         smi_result = smi_event_handler(smi_info, time_diff);
1082
1083         spin_unlock_irqrestore(&(smi_info->si_lock), flags);
1084
1085         smi_info->last_timeout_jiffies = jiffies_now;
1086
1087         if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
1088                 /* Running with interrupts, only do long timeouts. */
1089                 timeout = jiffies + SI_TIMEOUT_JIFFIES;
1090                 smi_inc_stat(smi_info, long_timeouts);
1091                 goto do_mod_timer;
1092         }
1093
1094         /*
1095          * If the state machine asks for a short delay, then shorten
1096          * the timer timeout.
1097          */
1098         if (smi_result == SI_SM_CALL_WITH_DELAY) {
1099                 smi_inc_stat(smi_info, short_timeouts);
1100                 timeout = jiffies + 1;
1101         } else {
1102                 smi_inc_stat(smi_info, long_timeouts);
1103                 timeout = jiffies + SI_TIMEOUT_JIFFIES;
1104         }
1105
1106  do_mod_timer:
1107         if (smi_result != SI_SM_IDLE)
1108                 mod_timer(&(smi_info->si_timer), timeout);
1109 }
1110
1111 static irqreturn_t si_irq_handler(int irq, void *data)
1112 {
1113         struct smi_info *smi_info = data;
1114         unsigned long   flags;
1115 #ifdef DEBUG_TIMING
1116         struct timeval  t;
1117 #endif
1118
1119         spin_lock_irqsave(&(smi_info->si_lock), flags);
1120
1121         smi_inc_stat(smi_info, interrupts);
1122
1123 #ifdef DEBUG_TIMING
1124         do_gettimeofday(&t);
1125         printk(KERN_DEBUG "**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec);
1126 #endif
1127         smi_event_handler(smi_info, 0);
1128         spin_unlock_irqrestore(&(smi_info->si_lock), flags);
1129         return IRQ_HANDLED;
1130 }
1131
1132 static irqreturn_t si_bt_irq_handler(int irq, void *data)
1133 {
1134         struct smi_info *smi_info = data;
1135         /* We need to clear the IRQ flag for the BT interface. */
1136         smi_info->io.outputb(&smi_info->io, IPMI_BT_INTMASK_REG,
1137                              IPMI_BT_INTMASK_CLEAR_IRQ_BIT
1138                              | IPMI_BT_INTMASK_ENABLE_IRQ_BIT);
1139         return si_irq_handler(irq, data);
1140 }
1141
1142 static int smi_start_processing(void       *send_info,
1143                                 ipmi_smi_t intf)
1144 {
1145         struct smi_info *new_smi = send_info;
1146         int             enable = 0;
1147
1148         new_smi->intf = intf;
1149
1150         /* Try to claim any interrupts. */
1151         if (new_smi->irq_setup)
1152                 new_smi->irq_setup(new_smi);
1153
1154         /* Set up the timer that drives the interface. */
1155         setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi);
1156         new_smi->last_timeout_jiffies = jiffies;
1157         mod_timer(&new_smi->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
1158
1159         /*
1160          * Check if the user forcefully enabled the daemon.
1161          */
1162         if (new_smi->intf_num < num_force_kipmid)
1163                 enable = force_kipmid[new_smi->intf_num];
1164         /*
1165          * The BT interface is efficient enough to not need a thread,
1166          * and there is no need for a thread if we have interrupts.
1167          */
1168         else if ((new_smi->si_type != SI_BT) && (!new_smi->irq))
1169                 enable = 1;
1170
1171         if (enable) {
1172                 new_smi->thread = kthread_run(ipmi_thread, new_smi,
1173                                               "kipmi%d", new_smi->intf_num);
1174                 if (IS_ERR(new_smi->thread)) {
1175                         dev_notice(new_smi->dev, "Could not start"
1176                                    " kernel thread due to error %ld, only using"
1177                                    " timers to drive the interface\n",
1178                                    PTR_ERR(new_smi->thread));
1179                         new_smi->thread = NULL;
1180                 }
1181         }
1182
1183         return 0;
1184 }
1185
1186 static void set_maintenance_mode(void *send_info, int enable)
1187 {
1188         struct smi_info   *smi_info = send_info;
1189
1190         if (!enable)
1191                 atomic_set(&smi_info->req_events, 0);
1192 }
1193
1194 static struct ipmi_smi_handlers handlers = {
1195         .owner                  = THIS_MODULE,
1196         .start_processing       = smi_start_processing,
1197         .sender                 = sender,
1198         .request_events         = request_events,
1199         .set_maintenance_mode   = set_maintenance_mode,
1200         .set_run_to_completion  = set_run_to_completion,
1201         .poll                   = poll,
1202 };
1203
1204 /*
1205  * There can be 4 IO ports passed in (with or without IRQs), 4 addresses,
1206  * a default IO port, and 1 ACPI/SPMI address.  That sets SI_MAX_DRIVERS.
1207  */
1208
1209 static LIST_HEAD(smi_infos);
1210 static DEFINE_MUTEX(smi_infos_lock);
1211 static int smi_num; /* Used to sequence the SMIs */
1212
1213 #define DEFAULT_REGSPACING      1
1214 #define DEFAULT_REGSIZE         1
1215
1216 static int           si_trydefaults = 1;
1217 static char          *si_type[SI_MAX_PARMS];
1218 #define MAX_SI_TYPE_STR 30
1219 static char          si_type_str[MAX_SI_TYPE_STR];
1220 static unsigned long addrs[SI_MAX_PARMS];
1221 static unsigned int num_addrs;
1222 static unsigned int  ports[SI_MAX_PARMS];
1223 static unsigned int num_ports;
1224 static int           irqs[SI_MAX_PARMS];
1225 static unsigned int num_irqs;
1226 static int           regspacings[SI_MAX_PARMS];
1227 static unsigned int num_regspacings;
1228 static int           regsizes[SI_MAX_PARMS];
1229 static unsigned int num_regsizes;
1230 static int           regshifts[SI_MAX_PARMS];
1231 static unsigned int num_regshifts;
1232 static int slave_addrs[SI_MAX_PARMS]; /* Leaving 0 chooses the default value */
1233 static unsigned int num_slave_addrs;
1234
1235 #define IPMI_IO_ADDR_SPACE  0
1236 #define IPMI_MEM_ADDR_SPACE 1
1237 static char *addr_space_to_str[] = { "i/o", "mem" };
1238
1239 static int hotmod_handler(const char *val, struct kernel_param *kp);
1240
1241 module_param_call(hotmod, hotmod_handler, NULL, NULL, 0200);
1242 MODULE_PARM_DESC(hotmod, "Add and remove interfaces.  See"
1243                  " Documentation/IPMI.txt in the kernel sources for the"
1244                  " gory details.");
1245
1246 module_param_named(trydefaults, si_trydefaults, bool, 0);
1247 MODULE_PARM_DESC(trydefaults, "Setting this to 'false' will disable the"
1248                  " default scan of the KCS and SMIC interface at the standard"
1249                  " address");
1250 module_param_string(type, si_type_str, MAX_SI_TYPE_STR, 0);
1251 MODULE_PARM_DESC(type, "Defines the type of each interface, each"
1252                  " interface separated by commas.  The types are 'kcs',"
1253                  " 'smic', and 'bt'.  For example si_type=kcs,bt will set"
1254                  " the first interface to kcs and the second to bt");
1255 module_param_array(addrs, ulong, &num_addrs, 0);
1256 MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the"
1257                  " addresses separated by commas.  Only use if an interface"
1258                  " is in memory.  Otherwise, set it to zero or leave"
1259                  " it blank.");
1260 module_param_array(ports, uint, &num_ports, 0);
1261 MODULE_PARM_DESC(ports, "Sets the port address of each interface, the"
1262                  " addresses separated by commas.  Only use if an interface"
1263                  " is a port.  Otherwise, set it to zero or leave"
1264                  " it blank.");
1265 module_param_array(irqs, int, &num_irqs, 0);
1266 MODULE_PARM_DESC(irqs, "Sets the interrupt of each interface, the"
1267                  " addresses separated by commas.  Only use if an interface"
1268                  " has an interrupt.  Otherwise, set it to zero or leave"
1269                  " it blank.");
1270 module_param_array(regspacings, int, &num_regspacings, 0);
1271 MODULE_PARM_DESC(regspacings, "The number of bytes between the start address"
1272                  " and each successive register used by the interface.  For"
1273                  " instance, if the start address is 0xca2 and the spacing"
1274                  " is 2, then the second address is at 0xca4.  Defaults"
1275                  " to 1.");
1276 module_param_array(regsizes, int, &num_regsizes, 0);
1277 MODULE_PARM_DESC(regsizes, "The size of the specific IPMI register in bytes."
1278                  " This should generally be 1, 2, 4, or 8 for an 8-bit,"
1279                  " 16-bit, 32-bit, or 64-bit register.  Use this if you"
1280                  " the 8-bit IPMI register has to be read from a larger"
1281                  " register.");
1282 module_param_array(regshifts, int, &num_regshifts, 0);
1283 MODULE_PARM_DESC(regshifts, "The amount to shift the data read from the."
1284                  " IPMI register, in bits.  For instance, if the data"
1285                  " is read from a 32-bit word and the IPMI data is in"
1286                  " bit 8-15, then the shift would be 8");
1287 module_param_array(slave_addrs, int, &num_slave_addrs, 0);
1288 MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for"
1289                  " the controller.  Normally this is 0x20, but can be"
1290                  " overridden by this parm.  This is an array indexed"
1291                  " by interface number.");
1292 module_param_array(force_kipmid, int, &num_force_kipmid, 0);
1293 MODULE_PARM_DESC(force_kipmid, "Force the kipmi daemon to be enabled (1) or"
1294                  " disabled(0).  Normally the IPMI driver auto-detects"
1295                  " this, but the value may be overridden by this parm.");
1296 module_param(unload_when_empty, int, 0);
1297 MODULE_PARM_DESC(unload_when_empty, "Unload the module if no interfaces are"
1298                  " specified or found, default is 1.  Setting to 0"
1299                  " is useful for hot add of devices using hotmod.");
1300 module_param_array(kipmid_max_busy_us, uint, &num_max_busy_us, 0644);
1301 MODULE_PARM_DESC(kipmid_max_busy_us,
1302                  "Max time (in microseconds) to busy-wait for IPMI data before"
1303                  " sleeping. 0 (default) means to wait forever. Set to 100-500"
1304                  " if kipmid is using up a lot of CPU time.");
1305
1306
1307 static void std_irq_cleanup(struct smi_info *info)
1308 {
1309         if (info->si_type == SI_BT)
1310                 /* Disable the interrupt in the BT interface. */
1311                 info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, 0);
1312         free_irq(info->irq, info);
1313 }
1314
1315 static int std_irq_setup(struct smi_info *info)
1316 {
1317         int rv;
1318
1319         if (!info->irq)
1320                 return 0;
1321
1322         if (info->si_type == SI_BT) {
1323                 rv = request_irq(info->irq,
1324                                  si_bt_irq_handler,
1325                                  IRQF_SHARED | IRQF_DISABLED,
1326                                  DEVICE_NAME,
1327                                  info);
1328                 if (!rv)
1329                         /* Enable the interrupt in the BT interface. */
1330                         info->io.outputb(&info->io, IPMI_BT_INTMASK_REG,
1331                                          IPMI_BT_INTMASK_ENABLE_IRQ_BIT);
1332         } else
1333                 rv = request_irq(info->irq,
1334                                  si_irq_handler,
1335                                  IRQF_SHARED | IRQF_DISABLED,
1336                                  DEVICE_NAME,
1337                                  info);
1338         if (rv) {
1339                 dev_warn(info->dev, "%s unable to claim interrupt %d,"
1340                          " running polled\n",
1341                          DEVICE_NAME, info->irq);
1342                 info->irq = 0;
1343         } else {
1344                 info->irq_cleanup = std_irq_cleanup;
1345                 dev_info(info->dev, "Using irq %d\n", info->irq);
1346         }
1347
1348         return rv;
1349 }
1350
1351 static unsigned char port_inb(struct si_sm_io *io, unsigned int offset)
1352 {
1353         unsigned int addr = io->addr_data;
1354
1355         return inb(addr + (offset * io->regspacing));
1356 }
1357
1358 static void port_outb(struct si_sm_io *io, unsigned int offset,
1359                       unsigned char b)
1360 {
1361         unsigned int addr = io->addr_data;
1362
1363         outb(b, addr + (offset * io->regspacing));
1364 }
1365
1366 static unsigned char port_inw(struct si_sm_io *io, unsigned int offset)
1367 {
1368         unsigned int addr = io->addr_data;
1369
1370         return (inw(addr + (offset * io->regspacing)) >> io->regshift) & 0xff;
1371 }
1372
1373 static void port_outw(struct si_sm_io *io, unsigned int offset,
1374                       unsigned char b)
1375 {
1376         unsigned int addr = io->addr_data;
1377
1378         outw(b << io->regshift, addr + (offset * io->regspacing));
1379 }
1380
1381 static unsigned char port_inl(struct si_sm_io *io, unsigned int offset)
1382 {
1383         unsigned int addr = io->addr_data;
1384
1385         return (inl(addr + (offset * io->regspacing)) >> io->regshift) & 0xff;
1386 }
1387
1388 static void port_outl(struct si_sm_io *io, unsigned int offset,
1389                       unsigned char b)
1390 {
1391         unsigned int addr = io->addr_data;
1392
1393         outl(b << io->regshift, addr+(offset * io->regspacing));
1394 }
1395
1396 static void port_cleanup(struct smi_info *info)
1397 {
1398         unsigned int addr = info->io.addr_data;
1399         int          idx;
1400
1401         if (addr) {
1402                 for (idx = 0; idx < info->io_size; idx++)
1403                         release_region(addr + idx * info->io.regspacing,
1404                                        info->io.regsize);
1405         }
1406 }
1407
1408 static int port_setup(struct smi_info *info)
1409 {
1410         unsigned int addr = info->io.addr_data;
1411         int          idx;
1412
1413         if (!addr)
1414                 return -ENODEV;
1415
1416         info->io_cleanup = port_cleanup;
1417
1418         /*
1419          * Figure out the actual inb/inw/inl/etc routine to use based
1420          * upon the register size.
1421          */
1422         switch (info->io.regsize) {
1423         case 1:
1424                 info->io.inputb = port_inb;
1425                 info->io.outputb = port_outb;
1426                 break;
1427         case 2:
1428                 info->io.inputb = port_inw;
1429                 info->io.outputb = port_outw;
1430                 break;
1431         case 4:
1432                 info->io.inputb = port_inl;
1433                 info->io.outputb = port_outl;
1434                 break;
1435         default:
1436                 dev_warn(info->dev, "Invalid register size: %d\n",
1437                          info->io.regsize);
1438                 return -EINVAL;
1439         }
1440
1441         /*
1442          * Some BIOSes reserve disjoint I/O regions in their ACPI
1443          * tables.  This causes problems when trying to register the
1444          * entire I/O region.  Therefore we must register each I/O
1445          * port separately.
1446          */
1447         for (idx = 0; idx < info->io_size; idx++) {
1448                 if (request_region(addr + idx * info->io.regspacing,
1449                                    info->io.regsize, DEVICE_NAME) == NULL) {
1450                         /* Undo allocations */
1451                         while (idx--) {
1452                                 release_region(addr + idx * info->io.regspacing,
1453                                                info->io.regsize);
1454                         }
1455                         return -EIO;
1456                 }
1457         }
1458         return 0;
1459 }
1460
1461 static unsigned char intf_mem_inb(struct si_sm_io *io, unsigned int offset)
1462 {
1463         return readb((io->addr)+(offset * io->regspacing));
1464 }
1465
1466 static void intf_mem_outb(struct si_sm_io *io, unsigned int offset,
1467                      unsigned char b)
1468 {
1469         writeb(b, (io->addr)+(offset * io->regspacing));
1470 }
1471
1472 static unsigned char intf_mem_inw(struct si_sm_io *io, unsigned int offset)
1473 {
1474         return (readw((io->addr)+(offset * io->regspacing)) >> io->regshift)
1475                 & 0xff;
1476 }
1477
1478 static void intf_mem_outw(struct si_sm_io *io, unsigned int offset,
1479                      unsigned char b)
1480 {
1481         writeb(b << io->regshift, (io->addr)+(offset * io->regspacing));
1482 }
1483
1484 static unsigned char intf_mem_inl(struct si_sm_io *io, unsigned int offset)
1485 {
1486         return (readl((io->addr)+(offset * io->regspacing)) >> io->regshift)
1487                 & 0xff;
1488 }
1489
1490 static void intf_mem_outl(struct si_sm_io *io, unsigned int offset,
1491                      unsigned char b)
1492 {
1493         writel(b << io->regshift, (io->addr)+(offset * io->regspacing));
1494 }
1495
1496 #ifdef readq
1497 static unsigned char mem_inq(struct si_sm_io *io, unsigned int offset)
1498 {
1499         return (readq((io->addr)+(offset * io->regspacing)) >> io->regshift)
1500                 & 0xff;
1501 }
1502
1503 static void mem_outq(struct si_sm_io *io, unsigned int offset,
1504                      unsigned char b)
1505 {
1506         writeq(b << io->regshift, (io->addr)+(offset * io->regspacing));
1507 }
1508 #endif
1509
1510 static void mem_cleanup(struct smi_info *info)
1511 {
1512         unsigned long addr = info->io.addr_data;
1513         int           mapsize;
1514
1515         if (info->io.addr) {
1516                 iounmap(info->io.addr);
1517
1518                 mapsize = ((info->io_size * info->io.regspacing)
1519                            - (info->io.regspacing - info->io.regsize));
1520
1521                 release_mem_region(addr, mapsize);
1522         }
1523 }
1524
1525 static int mem_setup(struct smi_info *info)
1526 {
1527         unsigned long addr = info->io.addr_data;
1528         int           mapsize;
1529
1530         if (!addr)
1531                 return -ENODEV;
1532
1533         info->io_cleanup = mem_cleanup;
1534
1535         /*
1536          * Figure out the actual readb/readw/readl/etc routine to use based
1537          * upon the register size.
1538          */
1539         switch (info->io.regsize) {
1540         case 1:
1541                 info->io.inputb = intf_mem_inb;
1542                 info->io.outputb = intf_mem_outb;
1543                 break;
1544         case 2:
1545                 info->io.inputb = intf_mem_inw;
1546                 info->io.outputb = intf_mem_outw;
1547                 break;
1548         case 4:
1549                 info->io.inputb = intf_mem_inl;
1550                 info->io.outputb = intf_mem_outl;
1551                 break;
1552 #ifdef readq
1553         case 8:
1554                 info->io.inputb = mem_inq;
1555                 info->io.outputb = mem_outq;
1556                 break;
1557 #endif
1558         default:
1559                 dev_warn(info->dev, "Invalid register size: %d\n",
1560                          info->io.regsize);
1561                 return -EINVAL;
1562         }
1563
1564         /*
1565          * Calculate the total amount of memory to claim.  This is an
1566          * unusual looking calculation, but it avoids claiming any
1567          * more memory than it has to.  It will claim everything
1568          * between the first address to the end of the last full
1569          * register.
1570          */
1571         mapsize = ((info->io_size * info->io.regspacing)
1572                    - (info->io.regspacing - info->io.regsize));
1573
1574         if (request_mem_region(addr, mapsize, DEVICE_NAME) == NULL)
1575                 return -EIO;
1576
1577         info->io.addr = ioremap(addr, mapsize);
1578         if (info->io.addr == NULL) {
1579                 release_mem_region(addr, mapsize);
1580                 return -EIO;
1581         }
1582         return 0;
1583 }
1584
1585 /*
1586  * Parms come in as <op1>[:op2[:op3...]].  ops are:
1587  *   add|remove,kcs|bt|smic,mem|i/o,<address>[,<opt1>[,<opt2>[,...]]]
1588  * Options are:
1589  *   rsp=<regspacing>
1590  *   rsi=<regsize>
1591  *   rsh=<regshift>
1592  *   irq=<irq>
1593  *   ipmb=<ipmb addr>
1594  */
1595 enum hotmod_op { HM_ADD, HM_REMOVE };
1596 struct hotmod_vals {
1597         char *name;
1598         int  val;
1599 };
1600 static struct hotmod_vals hotmod_ops[] = {
1601         { "add",        HM_ADD },
1602         { "remove",     HM_REMOVE },
1603         { NULL }
1604 };
1605 static struct hotmod_vals hotmod_si[] = {
1606         { "kcs",        SI_KCS },
1607         { "smic",       SI_SMIC },
1608         { "bt",         SI_BT },
1609         { NULL }
1610 };
1611 static struct hotmod_vals hotmod_as[] = {
1612         { "mem",        IPMI_MEM_ADDR_SPACE },
1613         { "i/o",        IPMI_IO_ADDR_SPACE },
1614         { NULL }
1615 };
1616
1617 static int parse_str(struct hotmod_vals *v, int *val, char *name, char **curr)
1618 {
1619         char *s;
1620         int  i;
1621
1622         s = strchr(*curr, ',');
1623         if (!s) {
1624                 printk(KERN_WARNING PFX "No hotmod %s given.\n", name);
1625                 return -EINVAL;
1626         }
1627         *s = '\0';
1628         s++;
1629         for (i = 0; hotmod_ops[i].name; i++) {
1630                 if (strcmp(*curr, v[i].name) == 0) {
1631                         *val = v[i].val;
1632                         *curr = s;
1633                         return 0;
1634                 }
1635         }
1636
1637         printk(KERN_WARNING PFX "Invalid hotmod %s '%s'\n", name, *curr);
1638         return -EINVAL;
1639 }
1640
1641 static int check_hotmod_int_op(const char *curr, const char *option,
1642                                const char *name, int *val)
1643 {
1644         char *n;
1645
1646         if (strcmp(curr, name) == 0) {
1647                 if (!option) {
1648                         printk(KERN_WARNING PFX
1649                                "No option given for '%s'\n",
1650                                curr);
1651                         return -EINVAL;
1652                 }
1653                 *val = simple_strtoul(option, &n, 0);
1654                 if ((*n != '\0') || (*option == '\0')) {
1655                         printk(KERN_WARNING PFX
1656                                "Bad option given for '%s'\n",
1657                                curr);
1658                         return -EINVAL;
1659                 }
1660                 return 1;
1661         }
1662         return 0;
1663 }
1664
1665 static int hotmod_handler(const char *val, struct kernel_param *kp)
1666 {
1667         char *str = kstrdup(val, GFP_KERNEL);
1668         int  rv;
1669         char *next, *curr, *s, *n, *o;
1670         enum hotmod_op op;
1671         enum si_type si_type;
1672         int  addr_space;
1673         unsigned long addr;
1674         int regspacing;
1675         int regsize;
1676         int regshift;
1677         int irq;
1678         int ipmb;
1679         int ival;
1680         int len;
1681         struct smi_info *info;
1682
1683         if (!str)
1684                 return -ENOMEM;
1685
1686         /* Kill any trailing spaces, as we can get a "\n" from echo. */
1687         len = strlen(str);
1688         ival = len - 1;
1689         while ((ival >= 0) && isspace(str[ival])) {
1690                 str[ival] = '\0';
1691                 ival--;
1692         }
1693
1694         for (curr = str; curr; curr = next) {
1695                 regspacing = 1;
1696                 regsize = 1;
1697                 regshift = 0;
1698                 irq = 0;
1699                 ipmb = 0; /* Choose the default if not specified */
1700
1701                 next = strchr(curr, ':');
1702                 if (next) {
1703                         *next = '\0';
1704                         next++;
1705                 }
1706
1707                 rv = parse_str(hotmod_ops, &ival, "operation", &curr);
1708                 if (rv)
1709                         break;
1710                 op = ival;
1711
1712                 rv = parse_str(hotmod_si, &ival, "interface type", &curr);
1713                 if (rv)
1714                         break;
1715                 si_type = ival;
1716
1717                 rv = parse_str(hotmod_as, &addr_space, "address space", &curr);
1718                 if (rv)
1719                         break;
1720
1721                 s = strchr(curr, ',');
1722                 if (s) {
1723                         *s = '\0';
1724                         s++;
1725                 }
1726                 addr = simple_strtoul(curr, &n, 0);
1727                 if ((*n != '\0') || (*curr == '\0')) {
1728                         printk(KERN_WARNING PFX "Invalid hotmod address"
1729                                " '%s'\n", curr);
1730                         break;
1731                 }
1732
1733                 while (s) {
1734                         curr = s;
1735                         s = strchr(curr, ',');
1736                         if (s) {
1737                                 *s = '\0';
1738                                 s++;
1739                         }
1740                         o = strchr(curr, '=');
1741                         if (o) {
1742                                 *o = '\0';
1743                                 o++;
1744                         }
1745                         rv = check_hotmod_int_op(curr, o, "rsp", &regspacing);
1746                         if (rv < 0)
1747                                 goto out;
1748                         else if (rv)
1749                                 continue;
1750                         rv = check_hotmod_int_op(curr, o, "rsi", &regsize);
1751                         if (rv < 0)
1752                                 goto out;
1753                         else if (rv)
1754                                 continue;
1755                         rv = check_hotmod_int_op(curr, o, "rsh", &regshift);
1756                         if (rv < 0)
1757                                 goto out;
1758                         else if (rv)
1759                                 continue;
1760                         rv = check_hotmod_int_op(curr, o, "irq", &irq);
1761                         if (rv < 0)
1762                                 goto out;
1763                         else if (rv)
1764                                 continue;
1765                         rv = check_hotmod_int_op(curr, o, "ipmb", &ipmb);
1766                         if (rv < 0)
1767                                 goto out;
1768                         else if (rv)
1769                                 continue;
1770
1771                         rv = -EINVAL;
1772                         printk(KERN_WARNING PFX
1773                                "Invalid hotmod option '%s'\n",
1774                                curr);
1775                         goto out;
1776                 }
1777
1778                 if (op == HM_ADD) {
1779                         info = kzalloc(sizeof(*info), GFP_KERNEL);
1780                         if (!info) {
1781                                 rv = -ENOMEM;
1782                                 goto out;
1783                         }
1784
1785                         info->addr_source = SI_HOTMOD;
1786                         info->si_type = si_type;
1787                         info->io.addr_data = addr;
1788                         info->io.addr_type = addr_space;
1789                         if (addr_space == IPMI_MEM_ADDR_SPACE)
1790                                 info->io_setup = mem_setup;
1791                         else
1792                                 info->io_setup = port_setup;
1793
1794                         info->io.addr = NULL;
1795                         info->io.regspacing = regspacing;
1796                         if (!info->io.regspacing)
1797                                 info->io.regspacing = DEFAULT_REGSPACING;
1798                         info->io.regsize = regsize;
1799                         if (!info->io.regsize)
1800                                 info->io.regsize = DEFAULT_REGSPACING;
1801                         info->io.regshift = regshift;
1802                         info->irq = irq;
1803                         if (info->irq)
1804                                 info->irq_setup = std_irq_setup;
1805                         info->slave_addr = ipmb;
1806
1807                         if (!add_smi(info)) {
1808                                 if (try_smi_init(info))
1809                                         cleanup_one_si(info);
1810                         } else {
1811                                 kfree(info);
1812                         }
1813                 } else {
1814                         /* remove */
1815                         struct smi_info *e, *tmp_e;
1816
1817                         mutex_lock(&smi_infos_lock);
1818                         list_for_each_entry_safe(e, tmp_e, &smi_infos, link) {
1819                                 if (e->io.addr_type != addr_space)
1820                                         continue;
1821                                 if (e->si_type != si_type)
1822                                         continue;
1823                                 if (e->io.addr_data == addr)
1824                                         cleanup_one_si(e);
1825                         }
1826                         mutex_unlock(&smi_infos_lock);
1827                 }
1828         }
1829         rv = len;
1830  out:
1831         kfree(str);
1832         return rv;
1833 }
1834
1835 static __devinit void hardcode_find_bmc(void)
1836 {
1837         int             i;
1838         struct smi_info *info;
1839
1840         for (i = 0; i < SI_MAX_PARMS; i++) {
1841                 if (!ports[i] && !addrs[i])
1842                         continue;
1843
1844                 info = kzalloc(sizeof(*info), GFP_KERNEL);
1845                 if (!info)
1846                         return;
1847
1848                 info->addr_source = SI_HARDCODED;
1849                 printk(KERN_INFO PFX "probing via hardcoded address\n");
1850
1851                 if (!si_type[i] || strcmp(si_type[i], "kcs") == 0) {
1852                         info->si_type = SI_KCS;
1853                 } else if (strcmp(si_type[i], "smic") == 0) {
1854                         info->si_type = SI_SMIC;
1855                 } else if (strcmp(si_type[i], "bt") == 0) {
1856                         info->si_type = SI_BT;
1857                 } else {
1858                         printk(KERN_WARNING PFX "Interface type specified "
1859                                "for interface %d, was invalid: %s\n",
1860                                i, si_type[i]);
1861                         kfree(info);
1862                         continue;
1863                 }
1864
1865                 if (ports[i]) {
1866                         /* An I/O port */
1867                         info->io_setup = port_setup;
1868                         info->io.addr_data = ports[i];
1869                         info->io.addr_type = IPMI_IO_ADDR_SPACE;
1870                 } else if (addrs[i]) {
1871                         /* A memory port */
1872                         info->io_setup = mem_setup;
1873                         info->io.addr_data = addrs[i];
1874                         info->io.addr_type = IPMI_MEM_ADDR_SPACE;
1875                 } else {
1876                         printk(KERN_WARNING PFX "Interface type specified "
1877                                "for interface %d, but port and address were "
1878                                "not set or set to zero.\n", i);
1879                         kfree(info);
1880                         continue;
1881                 }
1882
1883                 info->io.addr = NULL;
1884                 info->io.regspacing = regspacings[i];
1885                 if (!info->io.regspacing)
1886                         info->io.regspacing = DEFAULT_REGSPACING;
1887                 info->io.regsize = regsizes[i];
1888                 if (!info->io.regsize)
1889                         info->io.regsize = DEFAULT_REGSPACING;
1890                 info->io.regshift = regshifts[i];
1891                 info->irq = irqs[i];
1892                 if (info->irq)
1893                         info->irq_setup = std_irq_setup;
1894                 info->slave_addr = slave_addrs[i];
1895
1896                 if (!add_smi(info)) {
1897                         if (try_smi_init(info))
1898                                 cleanup_one_si(info);
1899                 } else {
1900                         kfree(info);
1901                 }
1902         }
1903 }
1904
1905 #ifdef CONFIG_ACPI
1906
1907 #include <linux/acpi.h>
1908
1909 /*
1910  * Once we get an ACPI failure, we don't try any more, because we go
1911  * through the tables sequentially.  Once we don't find a table, there
1912  * are no more.
1913  */
1914 static int acpi_failure;
1915
1916 /* For GPE-type interrupts. */
1917 static u32 ipmi_acpi_gpe(void *context)
1918 {
1919         struct smi_info *smi_info = context;
1920         unsigned long   flags;
1921 #ifdef DEBUG_TIMING
1922         struct timeval t;
1923 #endif
1924
1925         spin_lock_irqsave(&(smi_info->si_lock), flags);
1926
1927         smi_inc_stat(smi_info, interrupts);
1928
1929 #ifdef DEBUG_TIMING
1930         do_gettimeofday(&t);
1931         printk("**ACPI_GPE: %d.%9.9d\n", t.tv_sec, t.tv_usec);
1932 #endif
1933         smi_event_handler(smi_info, 0);
1934         spin_unlock_irqrestore(&(smi_info->si_lock), flags);
1935
1936         return ACPI_INTERRUPT_HANDLED;
1937 }
1938
1939 static void acpi_gpe_irq_cleanup(struct smi_info *info)
1940 {
1941         if (!info->irq)
1942                 return;
1943
1944         acpi_remove_gpe_handler(NULL, info->irq, &ipmi_acpi_gpe);
1945 }
1946
1947 static int acpi_gpe_irq_setup(struct smi_info *info)
1948 {
1949         acpi_status status;
1950
1951         if (!info->irq)
1952                 return 0;
1953
1954         /* FIXME - is level triggered right? */
1955         status = acpi_install_gpe_handler(NULL,
1956                                           info->irq,
1957                                           ACPI_GPE_LEVEL_TRIGGERED,
1958                                           &ipmi_acpi_gpe,
1959                                           info);
1960         if (status != AE_OK) {
1961                 dev_warn(info->dev, "%s unable to claim ACPI GPE %d,"
1962                          " running polled\n", DEVICE_NAME, info->irq);
1963                 info->irq = 0;
1964                 return -EINVAL;
1965         } else {
1966                 info->irq_cleanup = acpi_gpe_irq_cleanup;
1967                 dev_info(info->dev, "Using ACPI GPE %d\n", info->irq);
1968                 return 0;
1969         }
1970 }
1971
1972 /*
1973  * Defined at
1974  * http://h21007.www2.hp.com/portal/download/files
1975  * /unprot/hpspmi.pdf
1976  */
1977 struct SPMITable {
1978         s8      Signature[4];
1979         u32     Length;
1980         u8      Revision;
1981         u8      Checksum;
1982         s8      OEMID[6];
1983         s8      OEMTableID[8];
1984         s8      OEMRevision[4];
1985         s8      CreatorID[4];
1986         s8      CreatorRevision[4];
1987         u8      InterfaceType;
1988         u8      IPMIlegacy;
1989         s16     SpecificationRevision;
1990
1991         /*
1992          * Bit 0 - SCI interrupt supported
1993          * Bit 1 - I/O APIC/SAPIC
1994          */
1995         u8      InterruptType;
1996
1997         /*
1998          * If bit 0 of InterruptType is set, then this is the SCI
1999          * interrupt in the GPEx_STS register.
2000          */
2001         u8      GPE;
2002
2003         s16     Reserved;
2004
2005         /*
2006          * If bit 1 of InterruptType is set, then this is the I/O
2007          * APIC/SAPIC interrupt.
2008          */
2009         u32     GlobalSystemInterrupt;
2010
2011         /* The actual register address. */
2012         struct acpi_generic_address addr;
2013
2014         u8      UID[4];
2015
2016         s8      spmi_id[1]; /* A '\0' terminated array starts here. */
2017 };
2018
2019 static __devinit int try_init_spmi(struct SPMITable *spmi)
2020 {
2021         struct smi_info  *info;
2022
2023         if (spmi->IPMIlegacy != 1) {
2024                 printk(KERN_INFO PFX "Bad SPMI legacy %d\n", spmi->IPMIlegacy);
2025                 return -ENODEV;
2026         }
2027
2028         info = kzalloc(sizeof(*info), GFP_KERNEL);
2029         if (!info) {
2030                 printk(KERN_ERR PFX "Could not allocate SI data (3)\n");
2031                 return -ENOMEM;
2032         }
2033
2034         info->addr_source = SI_SPMI;
2035         printk(KERN_INFO PFX "probing via SPMI\n");
2036
2037         /* Figure out the interface type. */
2038         switch (spmi->InterfaceType) {
2039         case 1: /* KCS */
2040                 info->si_type = SI_KCS;
2041                 break;
2042         case 2: /* SMIC */
2043                 info->si_type = SI_SMIC;
2044                 break;
2045         case 3: /* BT */
2046                 info->si_type = SI_BT;
2047                 break;
2048         default:
2049                 printk(KERN_INFO PFX "Unknown ACPI/SPMI SI type %d\n",
2050                        spmi->InterfaceType);
2051                 kfree(info);
2052                 return -EIO;
2053         }
2054
2055         if (spmi->InterruptType & 1) {
2056                 /* We've got a GPE interrupt. */
2057                 info->irq = spmi->GPE;
2058                 info->irq_setup = acpi_gpe_irq_setup;
2059         } else if (spmi->InterruptType & 2) {
2060                 /* We've got an APIC/SAPIC interrupt. */
2061                 info->irq = spmi->GlobalSystemInterrupt;
2062                 info->irq_setup = std_irq_setup;
2063         } else {
2064                 /* Use the default interrupt setting. */
2065                 info->irq = 0;
2066                 info->irq_setup = NULL;
2067         }
2068
2069         if (spmi->addr.bit_width) {
2070                 /* A (hopefully) properly formed register bit width. */
2071                 info->io.regspacing = spmi->addr.bit_width / 8;
2072         } else {
2073                 info->io.regspacing = DEFAULT_REGSPACING;
2074         }
2075         info->io.regsize = info->io.regspacing;
2076         info->io.regshift = spmi->addr.bit_offset;
2077
2078         if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
2079                 info->io_setup = mem_setup;
2080                 info->io.addr_type = IPMI_MEM_ADDR_SPACE;
2081         } else if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
2082                 info->io_setup = port_setup;
2083                 info->io.addr_type = IPMI_IO_ADDR_SPACE;
2084         } else {
2085                 kfree(info);
2086                 printk(KERN_WARNING PFX "Unknown ACPI I/O Address type\n");
2087                 return -EIO;
2088         }
2089         info->io.addr_data = spmi->addr.address;
2090
2091         pr_info("ipmi_si: SPMI: %s %#lx regsize %d spacing %d irq %d\n",
2092                  (info->io.addr_type == IPMI_IO_ADDR_SPACE) ? "io" : "mem",
2093                  info->io.addr_data, info->io.regsize, info->io.regspacing,
2094                  info->irq);
2095
2096         if (add_smi(info))
2097                 kfree(info);
2098
2099         return 0;
2100 }
2101
2102 static __devinit void spmi_find_bmc(void)
2103 {
2104         acpi_status      status;
2105         struct SPMITable *spmi;
2106         int              i;
2107
2108         if (acpi_disabled)
2109                 return;
2110
2111         if (acpi_failure)
2112                 return;
2113
2114         for (i = 0; ; i++) {
2115                 status = acpi_get_table(ACPI_SIG_SPMI, i+1,
2116                                         (struct acpi_table_header **)&spmi);
2117                 if (status != AE_OK)
2118                         return;
2119
2120                 try_init_spmi(spmi);
2121         }
2122 }
2123
2124 static int __devinit ipmi_pnp_probe(struct pnp_dev *dev,
2125                                     const struct pnp_device_id *dev_id)
2126 {
2127         struct acpi_device *acpi_dev;
2128         struct smi_info *info;
2129         struct resource *res;
2130         acpi_handle handle;
2131         acpi_status status;
2132         unsigned long long tmp;
2133
2134         acpi_dev = pnp_acpi_device(dev);
2135         if (!acpi_dev)
2136                 return -ENODEV;
2137
2138         info = kzalloc(sizeof(*info), GFP_KERNEL);
2139         if (!info)
2140                 return -ENOMEM;
2141
2142         info->addr_source = SI_ACPI;
2143         printk(KERN_INFO PFX "probing via ACPI\n");
2144
2145         handle = acpi_dev->handle;
2146
2147         /* _IFT tells us the interface type: KCS, BT, etc */
2148         status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp);
2149         if (ACPI_FAILURE(status))
2150                 goto err_free;
2151
2152         switch (tmp) {
2153         case 1:
2154                 info->si_type = SI_KCS;
2155                 break;
2156         case 2:
2157                 info->si_type = SI_SMIC;
2158                 break;
2159         case 3:
2160                 info->si_type = SI_BT;
2161                 break;
2162         default:
2163                 dev_info(&dev->dev, "unknown IPMI type %lld\n", tmp);
2164                 goto err_free;
2165         }
2166
2167         res = pnp_get_resource(dev, IORESOURCE_IO, 0);
2168         if (res) {
2169                 info->io_setup = port_setup;
2170                 info->io.addr_type = IPMI_IO_ADDR_SPACE;
2171         } else {
2172                 res = pnp_get_resource(dev, IORESOURCE_MEM, 0);
2173                 if (res) {
2174                         info->io_setup = mem_setup;
2175                         info->io.addr_type = IPMI_MEM_ADDR_SPACE;
2176                 }
2177         }
2178         if (!res) {
2179                 dev_err(&dev->dev, "no I/O or memory address\n");
2180                 goto err_free;
2181         }
2182         info->io.addr_data = res->start;
2183
2184         info->io.regspacing = DEFAULT_REGSPACING;
2185         res = pnp_get_resource(dev,
2186                                (info->io.addr_type == IPMI_IO_ADDR_SPACE) ?
2187                                         IORESOURCE_IO : IORESOURCE_MEM,
2188                                1);
2189         if (res) {
2190                 if (res->start > info->io.addr_data)
2191                         info->io.regspacing = res->start - info->io.addr_data;
2192         }
2193         info->io.regsize = DEFAULT_REGSPACING;
2194         info->io.regshift = 0;
2195
2196         /* If _GPE exists, use it; otherwise use standard interrupts */
2197         status = acpi_evaluate_integer(handle, "_GPE", NULL, &tmp);
2198         if (ACPI_SUCCESS(status)) {
2199                 info->irq = tmp;
2200                 info->irq_setup = acpi_gpe_irq_setup;
2201         } else if (pnp_irq_valid(dev, 0)) {
2202                 info->irq = pnp_irq(dev, 0);
2203                 info->irq_setup = std_irq_setup;
2204         }
2205
2206         info->dev = &dev->dev;
2207         pnp_set_drvdata(dev, info);
2208
2209         dev_info(info->dev, "%pR regsize %d spacing %d irq %d\n",
2210                  res, info->io.regsize, info->io.regspacing,
2211                  info->irq);
2212
2213         if (add_smi(info))
2214                 goto err_free;
2215
2216         return 0;
2217
2218 err_free:
2219         kfree(info);
2220         return -EINVAL;
2221 }
2222
2223 static void __devexit ipmi_pnp_remove(struct pnp_dev *dev)
2224 {
2225         struct smi_info *info = pnp_get_drvdata(dev);
2226
2227         cleanup_one_si(info);
2228 }
2229
2230 static const struct pnp_device_id pnp_dev_table[] = {
2231         {"IPI0001", 0},
2232         {"", 0},
2233 };
2234
2235 static struct pnp_driver ipmi_pnp_driver = {
2236         .name           = DEVICE_NAME,
2237         .probe          = ipmi_pnp_probe,
2238         .remove         = __devexit_p(ipmi_pnp_remove),
2239         .id_table       = pnp_dev_table,
2240 };
2241 #endif
2242
2243 #ifdef CONFIG_DMI
2244 struct dmi_ipmi_data {
2245         u8              type;
2246         u8              addr_space;
2247         unsigned long   base_addr;
2248         u8              irq;
2249         u8              offset;
2250         u8              slave_addr;
2251 };
2252
2253 static int __devinit decode_dmi(const struct dmi_header *dm,
2254                                 struct dmi_ipmi_data *dmi)
2255 {
2256         const u8        *data = (const u8 *)dm;
2257         unsigned long   base_addr;
2258         u8              reg_spacing;
2259         u8              len = dm->length;
2260
2261         dmi->type = data[4];
2262
2263         memcpy(&base_addr, data+8, sizeof(unsigned long));
2264         if (len >= 0x11) {
2265                 if (base_addr & 1) {
2266                         /* I/O */
2267                         base_addr &= 0xFFFE;
2268                         dmi->addr_space = IPMI_IO_ADDR_SPACE;
2269                 } else
2270                         /* Memory */
2271                         dmi->addr_space = IPMI_MEM_ADDR_SPACE;
2272
2273                 /* If bit 4 of byte 0x10 is set, then the lsb for the address
2274                    is odd. */
2275                 dmi->base_addr = base_addr | ((data[0x10] & 0x10) >> 4);
2276
2277                 dmi->irq = data[0x11];
2278
2279                 /* The top two bits of byte 0x10 hold the register spacing. */
2280                 reg_spacing = (data[0x10] & 0xC0) >> 6;
2281                 switch (reg_spacing) {
2282                 case 0x00: /* Byte boundaries */
2283                     dmi->offset = 1;
2284                     break;
2285                 case 0x01: /* 32-bit boundaries */
2286                     dmi->offset = 4;
2287                     break;
2288                 case 0x02: /* 16-byte boundaries */
2289                     dmi->offset = 16;
2290                     break;
2291                 default:
2292                     /* Some other interface, just ignore it. */
2293                     return -EIO;
2294                 }
2295         } else {
2296                 /* Old DMI spec. */
2297                 /*
2298                  * Note that technically, the lower bit of the base
2299                  * address should be 1 if the address is I/O and 0 if
2300                  * the address is in memory.  So many systems get that
2301                  * wrong (and all that I have seen are I/O) so we just
2302                  * ignore that bit and assume I/O.  Systems that use
2303                  * memory should use the newer spec, anyway.
2304                  */
2305                 dmi->base_addr = base_addr & 0xfffe;
2306                 dmi->addr_space = IPMI_IO_ADDR_SPACE;
2307                 dmi->offset = 1;
2308         }
2309
2310         dmi->slave_addr = data[6];
2311
2312         return 0;
2313 }
2314
2315 static __devinit void try_init_dmi(struct dmi_ipmi_data *ipmi_data)
2316 {
2317         struct smi_info *info;
2318
2319         info = kzalloc(sizeof(*info), GFP_KERNEL);
2320         if (!info) {
2321                 printk(KERN_ERR PFX "Could not allocate SI data\n");
2322                 return;
2323         }
2324
2325         info->addr_source = SI_SMBIOS;
2326         printk(KERN_INFO PFX "probing via SMBIOS\n");
2327
2328         switch (ipmi_data->type) {
2329         case 0x01: /* KCS */
2330                 info->si_type = SI_KCS;
2331                 break;
2332         case 0x02: /* SMIC */
2333                 info->si_type = SI_SMIC;
2334                 break;
2335         case 0x03: /* BT */
2336                 info->si_type = SI_BT;
2337                 break;
2338         default:
2339                 kfree(info);
2340                 return;
2341         }
2342
2343         switch (ipmi_data->addr_space) {
2344         case IPMI_MEM_ADDR_SPACE:
2345                 info->io_setup = mem_setup;
2346                 info->io.addr_type = IPMI_MEM_ADDR_SPACE;
2347                 break;
2348
2349         case IPMI_IO_ADDR_SPACE:
2350                 info->io_setup = port_setup;
2351                 info->io.addr_type = IPMI_IO_ADDR_SPACE;
2352                 break;
2353
2354         default:
2355                 kfree(info);
2356                 printk(KERN_WARNING PFX "Unknown SMBIOS I/O Address type: %d\n",
2357                        ipmi_data->addr_space);
2358                 return;
2359         }
2360         info->io.addr_data = ipmi_data->base_addr;
2361
2362         info->io.regspacing = ipmi_data->offset;
2363         if (!info->io.regspacing)
2364                 info->io.regspacing = DEFAULT_REGSPACING;
2365         info->io.regsize = DEFAULT_REGSPACING;
2366         info->io.regshift = 0;
2367
2368         info->slave_addr = ipmi_data->slave_addr;
2369
2370         info->irq = ipmi_data->irq;
2371         if (info->irq)
2372                 info->irq_setup = std_irq_setup;
2373
2374         pr_info("ipmi_si: SMBIOS: %s %#lx regsize %d spacing %d irq %d\n",
2375                  (info->io.addr_type == IPMI_IO_ADDR_SPACE) ? "io" : "mem",
2376                  info->io.addr_data, info->io.regsize, info->io.regspacing,
2377                  info->irq);
2378
2379         if (add_smi(info))
2380                 kfree(info);
2381 }
2382
2383 static void __devinit dmi_find_bmc(void)
2384 {
2385         const struct dmi_device *dev = NULL;
2386         struct dmi_ipmi_data data;
2387         int                  rv;
2388
2389         while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) {
2390                 memset(&data, 0, sizeof(data));
2391                 rv = decode_dmi((const struct dmi_header *) dev->device_data,
2392                                 &data);
2393                 if (!rv)
2394                         try_init_dmi(&data);
2395         }
2396 }
2397 #endif /* CONFIG_DMI */
2398
2399 #ifdef CONFIG_PCI
2400
2401 #define PCI_ERMC_CLASSCODE              0x0C0700
2402 #define PCI_ERMC_CLASSCODE_MASK         0xffffff00
2403 #define PCI_ERMC_CLASSCODE_TYPE_MASK    0xff
2404 #define PCI_ERMC_CLASSCODE_TYPE_SMIC    0x00
2405 #define PCI_ERMC_CLASSCODE_TYPE_KCS     0x01
2406 #define PCI_ERMC_CLASSCODE_TYPE_BT      0x02
2407
2408 #define PCI_HP_VENDOR_ID    0x103C
2409 #define PCI_MMC_DEVICE_ID   0x121A
2410 #define PCI_MMC_ADDR_CW     0x10
2411
2412 static void ipmi_pci_cleanup(struct smi_info *info)
2413 {
2414         struct pci_dev *pdev = info->addr_source_data;
2415
2416         pci_disable_device(pdev);
2417 }
2418
2419 static int __devinit ipmi_pci_probe(struct pci_dev *pdev,
2420                                     const struct pci_device_id *ent)
2421 {
2422         int rv;
2423         int class_type = pdev->class & PCI_ERMC_CLASSCODE_TYPE_MASK;
2424         struct smi_info *info;
2425
2426         info = kzalloc(sizeof(*info), GFP_KERNEL);
2427         if (!info)
2428                 return -ENOMEM;
2429
2430         info->addr_source = SI_PCI;
2431         dev_info(&pdev->dev, "probing via PCI");
2432
2433         switch (class_type) {
2434         case PCI_ERMC_CLASSCODE_TYPE_SMIC:
2435                 info->si_type = SI_SMIC;
2436                 break;
2437
2438         case PCI_ERMC_CLASSCODE_TYPE_KCS:
2439                 info->si_type = SI_KCS;
2440                 break;
2441
2442         case PCI_ERMC_CLASSCODE_TYPE_BT:
2443                 info->si_type = SI_BT;
2444                 break;
2445
2446         default:
2447                 kfree(info);
2448                 dev_info(&pdev->dev, "Unknown IPMI type: %d\n", class_type);
2449                 return -ENOMEM;
2450         }
2451
2452         rv = pci_enable_device(pdev);
2453         if (rv) {
2454                 dev_err(&pdev->dev, "couldn't enable PCI device\n");
2455                 kfree(info);
2456                 return rv;
2457         }
2458
2459         info->addr_source_cleanup = ipmi_pci_cleanup;
2460         info->addr_source_data = pdev;
2461
2462         if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) {
2463                 info->io_setup = port_setup;
2464                 info->io.addr_type = IPMI_IO_ADDR_SPACE;
2465         } else {
2466                 info->io_setup = mem_setup;
2467                 info->io.addr_type = IPMI_MEM_ADDR_SPACE;
2468         }
2469         info->io.addr_data = pci_resource_start(pdev, 0);
2470
2471         info->io.regspacing = DEFAULT_REGSPACING;
2472         info->io.regsize = DEFAULT_REGSPACING;
2473         info->io.regshift = 0;
2474
2475         info->irq = pdev->irq;
2476         if (info->irq)
2477                 info->irq_setup = std_irq_setup;
2478
2479         info->dev = &pdev->dev;
2480         pci_set_drvdata(pdev, info);
2481
2482         dev_info(&pdev->dev, "%pR regsize %d spacing %d irq %d\n",
2483                 &pdev->resource[0], info->io.regsize, info->io.regspacing,
2484                 info->irq);
2485
2486         if (add_smi(info))
2487                 kfree(info);
2488
2489         return 0;
2490 }
2491
2492 static void __devexit ipmi_pci_remove(struct pci_dev *pdev)
2493 {
2494         struct smi_info *info = pci_get_drvdata(pdev);
2495         cleanup_one_si(info);
2496 }
2497
2498 #ifdef CONFIG_PM
2499 static int ipmi_pci_suspend(struct pci_dev *pdev, pm_message_t state)
2500 {
2501         return 0;
2502 }
2503
2504 static int ipmi_pci_resume(struct pci_dev *pdev)
2505 {
2506         return 0;
2507 }
2508 #endif
2509
2510 static struct pci_device_id ipmi_pci_devices[] = {
2511         { PCI_DEVICE(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID) },
2512         { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE_MASK) },
2513         { 0, }
2514 };
2515 MODULE_DEVICE_TABLE(pci, ipmi_pci_devices);
2516
2517 static struct pci_driver ipmi_pci_driver = {
2518         .name =         DEVICE_NAME,
2519         .id_table =     ipmi_pci_devices,
2520         .probe =        ipmi_pci_probe,
2521         .remove =       __devexit_p(ipmi_pci_remove),
2522 #ifdef CONFIG_PM
2523         .suspend =      ipmi_pci_suspend,
2524         .resume =       ipmi_pci_resume,
2525 #endif
2526 };
2527 #endif /* CONFIG_PCI */
2528
2529
2530 #ifdef CONFIG_PPC_OF
2531 static int __devinit ipmi_of_probe(struct platform_device *dev,
2532                          const struct of_device_id *match)
2533 {
2534         struct smi_info *info;
2535         struct resource resource;
2536         const int *regsize, *regspacing, *regshift;
2537         struct device_node *np = dev->dev.of_node;
2538         int ret;
2539         int proplen;
2540
2541         dev_info(&dev->dev, "probing via device tree\n");
2542
2543         ret = of_address_to_resource(np, 0, &resource);
2544         if (ret) {
2545                 dev_warn(&dev->dev, PFX "invalid address from OF\n");
2546                 return ret;
2547         }
2548
2549         regsize = of_get_property(np, "reg-size", &proplen);
2550         if (regsize && proplen != 4) {
2551                 dev_warn(&dev->dev, PFX "invalid regsize from OF\n");
2552                 return -EINVAL;
2553         }
2554
2555         regspacing = of_get_property(np, "reg-spacing", &proplen);
2556         if (regspacing && proplen != 4) {
2557                 dev_warn(&dev->dev, PFX "invalid regspacing from OF\n");
2558                 return -EINVAL;
2559         }
2560
2561         regshift = of_get_property(np, "reg-shift", &proplen);
2562         if (regshift && proplen != 4) {
2563                 dev_warn(&dev->dev, PFX "invalid regshift from OF\n");
2564                 return -EINVAL;
2565         }
2566
2567         info = kzalloc(sizeof(*info), GFP_KERNEL);
2568
2569         if (!info) {
2570                 dev_err(&dev->dev,
2571                         "could not allocate memory for OF probe\n");
2572                 return -ENOMEM;
2573         }
2574
2575         info->si_type           = (enum si_type) match->data;
2576         info->addr_source       = SI_DEVICETREE;
2577         info->irq_setup         = std_irq_setup;
2578
2579         if (resource.flags & IORESOURCE_IO) {
2580                 info->io_setup          = port_setup;
2581                 info->io.addr_type      = IPMI_IO_ADDR_SPACE;
2582         } else {
2583                 info->io_setup          = mem_setup;
2584                 info->io.addr_type      = IPMI_MEM_ADDR_SPACE;
2585         }
2586
2587         info->io.addr_data      = resource.start;
2588
2589         info->io.regsize        = regsize ? *regsize : DEFAULT_REGSIZE;
2590         info->io.regspacing     = regspacing ? *regspacing : DEFAULT_REGSPACING;
2591         info->io.regshift       = regshift ? *regshift : 0;
2592
2593         info->irq               = irq_of_parse_and_map(dev->dev.of_node, 0);
2594         info->dev               = &dev->dev;
2595
2596         dev_dbg(&dev->dev, "addr 0x%lx regsize %d spacing %d irq %d\n",
2597                 info->io.addr_data, info->io.regsize, info->io.regspacing,
2598                 info->irq);
2599
2600         dev_set_drvdata(&dev->dev, info);
2601
2602         if (add_smi(info)) {
2603                 kfree(info);
2604                 return -EBUSY;
2605         }
2606
2607         return 0;
2608 }
2609
2610 static int __devexit ipmi_of_remove(struct platform_device *dev)
2611 {
2612         cleanup_one_si(dev_get_drvdata(&dev->dev));
2613         return 0;
2614 }
2615
2616 static struct of_device_id ipmi_match[] =
2617 {
2618         { .type = "ipmi", .compatible = "ipmi-kcs",
2619           .data = (void *)(unsigned long) SI_KCS },
2620         { .type = "ipmi", .compatible = "ipmi-smic",
2621           .data = (void *)(unsigned long) SI_SMIC },
2622         { .type = "ipmi", .compatible = "ipmi-bt",
2623           .data = (void *)(unsigned long) SI_BT },
2624         {},
2625 };
2626
2627 static struct of_platform_driver ipmi_of_platform_driver = {
2628         .driver = {
2629                 .name = "ipmi",
2630                 .owner = THIS_MODULE,
2631                 .of_match_table = ipmi_match,
2632         },
2633         .probe          = ipmi_of_probe,
2634         .remove         = __devexit_p(ipmi_of_remove),
2635 };
2636 #endif /* CONFIG_PPC_OF */
2637
2638 static int wait_for_msg_done(struct smi_info *smi_info)
2639 {
2640         enum si_sm_result     smi_result;
2641
2642         smi_result = smi_info->handlers->event(smi_info->si_sm, 0);
2643         for (;;) {
2644                 if (smi_result == SI_SM_CALL_WITH_DELAY ||
2645                     smi_result == SI_SM_CALL_WITH_TICK_DELAY) {
2646                         schedule_timeout_uninterruptible(1);
2647                         smi_result = smi_info->handlers->event(
2648                                 smi_info->si_sm, 100);
2649                 } else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
2650                         smi_result = smi_info->handlers->event(
2651                                 smi_info->si_sm, 0);
2652                 } else
2653                         break;
2654         }
2655         if (smi_result == SI_SM_HOSED)
2656                 /*
2657                  * We couldn't get the state machine to run, so whatever's at
2658                  * the port is probably not an IPMI SMI interface.
2659                  */
2660                 return -ENODEV;
2661
2662         return 0;
2663 }
2664
2665 static int try_get_dev_id(struct smi_info *smi_info)
2666 {
2667         unsigned char         msg[2];
2668         unsigned char         *resp;
2669         unsigned long         resp_len;
2670         int                   rv = 0;
2671
2672         resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
2673         if (!resp)
2674                 return -ENOMEM;
2675
2676         /*
2677          * Do a Get Device ID command, since it comes back with some
2678          * useful info.
2679          */
2680         msg[0] = IPMI_NETFN_APP_REQUEST << 2;
2681         msg[1] = IPMI_GET_DEVICE_ID_CMD;
2682         smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
2683
2684         rv = wait_for_msg_done(smi_info);
2685         if (rv)
2686                 goto out;
2687
2688         resp_len = smi_info->handlers->get_result(smi_info->si_sm,
2689                                                   resp, IPMI_MAX_MSG_LENGTH);
2690
2691         /* Check and record info from the get device id, in case we need it. */
2692         rv = ipmi_demangle_device_id(resp, resp_len, &smi_info->device_id);
2693
2694  out:
2695         kfree(resp);
2696         return rv;
2697 }
2698
2699 static int try_enable_event_buffer(struct smi_info *smi_info)
2700 {
2701         unsigned char         msg[3];
2702         unsigned char         *resp;
2703         unsigned long         resp_len;
2704         int                   rv = 0;
2705
2706         resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
2707         if (!resp)
2708                 return -ENOMEM;
2709
2710         msg[0] = IPMI_NETFN_APP_REQUEST << 2;
2711         msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
2712         smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
2713
2714         rv = wait_for_msg_done(smi_info);
2715         if (rv) {
2716                 printk(KERN_WARNING PFX "Error getting response from get"
2717                        " global enables command, the event buffer is not"
2718                        " enabled.\n");
2719                 goto out;
2720         }
2721
2722         resp_len = smi_info->handlers->get_result(smi_info->si_sm,
2723                                                   resp, IPMI_MAX_MSG_LENGTH);
2724
2725         if (resp_len < 4 ||
2726                         resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
2727                         resp[1] != IPMI_GET_BMC_GLOBAL_ENABLES_CMD   ||
2728                         resp[2] != 0) {
2729                 printk(KERN_WARNING PFX "Invalid return from get global"
2730                        " enables command, cannot enable the event buffer.\n");
2731                 rv = -EINVAL;
2732                 goto out;
2733         }
2734
2735         if (resp[3] & IPMI_BMC_EVT_MSG_BUFF)
2736                 /* buffer is already enabled, nothing to do. */
2737                 goto out;
2738
2739         msg[0] = IPMI_NETFN_APP_REQUEST << 2;
2740         msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
2741         msg[2] = resp[3] | IPMI_BMC_EVT_MSG_BUFF;
2742         smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
2743
2744         rv = wait_for_msg_done(smi_info);
2745         if (rv) {
2746                 printk(KERN_WARNING PFX "Error getting response from set"
2747                        " global, enables command, the event buffer is not"
2748                        " enabled.\n");
2749                 goto out;
2750         }
2751
2752         resp_len = smi_info->handlers->get_result(smi_info->si_sm,
2753                                                   resp, IPMI_MAX_MSG_LENGTH);
2754
2755         if (resp_len < 3 ||
2756                         resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
2757                         resp[1] != IPMI_SET_BMC_GLOBAL_ENABLES_CMD) {
2758                 printk(KERN_WARNING PFX "Invalid return from get global,"
2759                        "enables command, not enable the event buffer.\n");
2760                 rv = -EINVAL;
2761                 goto out;
2762         }
2763
2764         if (resp[2] != 0)
2765                 /*
2766                  * An error when setting the event buffer bit means
2767                  * that the event buffer is not supported.
2768                  */
2769                 rv = -ENOENT;
2770  out:
2771         kfree(resp);
2772         return rv;
2773 }
2774
2775 static int type_file_read_proc(char *page, char **start, off_t off,
2776                                int count, int *eof, void *data)
2777 {
2778         struct smi_info *smi = data;
2779
2780         return sprintf(page, "%s\n", si_to_str[smi->si_type]);
2781 }
2782
2783 static int stat_file_read_proc(char *page, char **start, off_t off,
2784                                int count, int *eof, void *data)
2785 {
2786         char            *out = (char *) page;
2787         struct smi_info *smi = data;
2788
2789         out += sprintf(out, "interrupts_enabled:    %d\n",
2790                        smi->irq && !smi->interrupt_disabled);
2791         out += sprintf(out, "short_timeouts:        %u\n",
2792                        smi_get_stat(smi, short_timeouts));
2793         out += sprintf(out, "long_timeouts:         %u\n",
2794                        smi_get_stat(smi, long_timeouts));
2795         out += sprintf(out, "idles:                 %u\n",
2796                        smi_get_stat(smi, idles));
2797         out += sprintf(out, "interrupts:            %u\n",
2798                        smi_get_stat(smi, interrupts));
2799         out += sprintf(out, "attentions:            %u\n",
2800                        smi_get_stat(smi, attentions));
2801         out += sprintf(out, "flag_fetches:          %u\n",
2802                        smi_get_stat(smi, flag_fetches));
2803         out += sprintf(out, "hosed_count:           %u\n",
2804                        smi_get_stat(smi, hosed_count));
2805         out += sprintf(out, "complete_transactions: %u\n",
2806                        smi_get_stat(smi, complete_transactions));
2807         out += sprintf(out, "events:                %u\n",
2808                        smi_get_stat(smi, events));
2809         out += sprintf(out, "watchdog_pretimeouts:  %u\n",
2810                        smi_get_stat(smi, watchdog_pretimeouts));
2811         out += sprintf(out, "incoming_messages:     %u\n",
2812                        smi_get_stat(smi, incoming_messages));
2813
2814         return out - page;
2815 }
2816
2817 static int param_read_proc(char *page, char **start, off_t off,
2818                            int count, int *eof, void *data)
2819 {
2820         struct smi_info *smi = data;
2821
2822         return sprintf(page,
2823                        "%s,%s,0x%lx,rsp=%d,rsi=%d,rsh=%d,irq=%d,ipmb=%d\n",
2824                        si_to_str[smi->si_type],
2825                        addr_space_to_str[smi->io.addr_type],
2826                        smi->io.addr_data,
2827                        smi->io.regspacing,
2828                        smi->io.regsize,
2829                        smi->io.regshift,
2830                        smi->irq,
2831                        smi->slave_addr);
2832 }
2833
2834 /*
2835  * oem_data_avail_to_receive_msg_avail
2836  * @info - smi_info structure with msg_flags set
2837  *
2838  * Converts flags from OEM_DATA_AVAIL to RECEIVE_MSG_AVAIL
2839  * Returns 1 indicating need to re-run handle_flags().
2840  */
2841 static int oem_data_avail_to_receive_msg_avail(struct smi_info *smi_info)
2842 {
2843         smi_info->msg_flags = ((smi_info->msg_flags & ~OEM_DATA_AVAIL) |
2844                                RECEIVE_MSG_AVAIL);
2845         return 1;
2846 }
2847
2848 /*
2849  * setup_dell_poweredge_oem_data_handler
2850  * @info - smi_info.device_id must be populated
2851  *
2852  * Systems that match, but have firmware version < 1.40 may assert
2853  * OEM0_DATA_AVAIL on their own, without being told via Set Flags that
2854  * it's safe to do so.  Such systems will de-assert OEM1_DATA_AVAIL
2855  * upon receipt of IPMI_GET_MSG_CMD, so we should treat these flags
2856  * as RECEIVE_MSG_AVAIL instead.
2857  *
2858  * As Dell has no plans to release IPMI 1.5 firmware that *ever*
2859  * assert the OEM[012] bits, and if it did, the driver would have to
2860  * change to handle that properly, we don't actually check for the
2861  * firmware version.
2862  * Device ID = 0x20                BMC on PowerEdge 8G servers
2863  * Device Revision = 0x80
2864  * Firmware Revision1 = 0x01       BMC version 1.40
2865  * Firmware Revision2 = 0x40       BCD encoded
2866  * IPMI Version = 0x51             IPMI 1.5
2867  * Manufacturer ID = A2 02 00      Dell IANA
2868  *
2869  * Additionally, PowerEdge systems with IPMI < 1.5 may also assert
2870  * OEM0_DATA_AVAIL and needs to be treated as RECEIVE_MSG_AVAIL.
2871  *
2872  */
2873 #define DELL_POWEREDGE_8G_BMC_DEVICE_ID  0x20
2874 #define DELL_POWEREDGE_8G_BMC_DEVICE_REV 0x80
2875 #define DELL_POWEREDGE_8G_BMC_IPMI_VERSION 0x51
2876 #define DELL_IANA_MFR_ID 0x0002a2
2877 static void setup_dell_poweredge_oem_data_handler(struct smi_info *smi_info)
2878 {
2879         struct ipmi_device_id *id = &smi_info->device_id;
2880         if (id->manufacturer_id == DELL_IANA_MFR_ID) {
2881                 if (id->device_id       == DELL_POWEREDGE_8G_BMC_DEVICE_ID  &&
2882                     id->device_revision == DELL_POWEREDGE_8G_BMC_DEVICE_REV &&
2883                     id->ipmi_version   == DELL_POWEREDGE_8G_BMC_IPMI_VERSION) {
2884                         smi_info->oem_data_avail_handler =
2885                                 oem_data_avail_to_receive_msg_avail;
2886                 } else if (ipmi_version_major(id) < 1 ||
2887                            (ipmi_version_major(id) == 1 &&
2888                             ipmi_version_minor(id) < 5)) {
2889                         smi_info->oem_data_avail_handler =
2890                                 oem_data_avail_to_receive_msg_avail;
2891                 }
2892         }
2893 }
2894
2895 #define CANNOT_RETURN_REQUESTED_LENGTH 0xCA
2896 static void return_hosed_msg_badsize(struct smi_info *smi_info)
2897 {
2898         struct ipmi_smi_msg *msg = smi_info->curr_msg;
2899
2900         /* Make it a reponse */
2901         msg->rsp[0] = msg->data[0] | 4;
2902         msg->rsp[1] = msg->data[1];
2903         msg->rsp[2] = CANNOT_RETURN_REQUESTED_LENGTH;
2904         msg->rsp_size = 3;
2905         smi_info->curr_msg = NULL;
2906         deliver_recv_msg(smi_info, msg);
2907 }
2908
2909 /*
2910  * dell_poweredge_bt_xaction_handler
2911  * @info - smi_info.device_id must be populated
2912  *
2913  * Dell PowerEdge servers with the BT interface (x6xx and 1750) will
2914  * not respond to a Get SDR command if the length of the data
2915  * requested is exactly 0x3A, which leads to command timeouts and no
2916  * data returned.  This intercepts such commands, and causes userspace
2917  * callers to try again with a different-sized buffer, which succeeds.
2918  */
2919
2920 #define STORAGE_NETFN 0x0A
2921 #define STORAGE_CMD_GET_SDR 0x23
2922 static int dell_poweredge_bt_xaction_handler(struct notifier_block *self,
2923                                              unsigned long unused,
2924                                              void *in)
2925 {
2926         struct smi_info *smi_info = in;
2927         unsigned char *data = smi_info->curr_msg->data;
2928         unsigned int size   = smi_info->curr_msg->data_size;
2929         if (size >= 8 &&
2930             (data[0]>>2) == STORAGE_NETFN &&
2931             data[1] == STORAGE_CMD_GET_SDR &&
2932             data[7] == 0x3A) {
2933                 return_hosed_msg_badsize(smi_info);
2934                 return NOTIFY_STOP;
2935         }
2936         return NOTIFY_DONE;
2937 }
2938
2939 static struct notifier_block dell_poweredge_bt_xaction_notifier = {
2940         .notifier_call  = dell_poweredge_bt_xaction_handler,
2941 };
2942
2943 /*
2944  * setup_dell_poweredge_bt_xaction_handler
2945  * @info - smi_info.device_id must be filled in already
2946  *
2947  * Fills in smi_info.device_id.start_transaction_pre_hook
2948  * when we know what function to use there.
2949  */
2950 static void
2951 setup_dell_poweredge_bt_xaction_handler(struct smi_info *smi_info)
2952 {
2953         struct ipmi_device_id *id = &smi_info->device_id;
2954         if (id->manufacturer_id == DELL_IANA_MFR_ID &&
2955             smi_info->si_type == SI_BT)
2956                 register_xaction_notifier(&dell_poweredge_bt_xaction_notifier);
2957 }
2958
2959 /*
2960  * setup_oem_data_handler
2961  * @info - smi_info.device_id must be filled in already
2962  *
2963  * Fills in smi_info.device_id.oem_data_available_handler
2964  * when we know what function to use there.
2965  */
2966
2967 static void setup_oem_data_handler(struct smi_info *smi_info)
2968 {
2969         setup_dell_poweredge_oem_data_handler(smi_info);
2970 }
2971
2972 static void setup_xaction_handlers(struct smi_info *smi_info)
2973 {
2974         setup_dell_poweredge_bt_xaction_handler(smi_info);
2975 }
2976
2977 static inline void wait_for_timer_and_thread(struct smi_info *smi_info)
2978 {
2979         if (smi_info->intf) {
2980                 /*
2981                  * The timer and thread are only running if the
2982                  * interface has been started up and registered.
2983                  */
2984                 if (smi_info->thread != NULL)
2985                         kthread_stop(smi_info->thread);
2986                 del_timer_sync(&smi_info->si_timer);
2987         }
2988 }
2989
2990 static __devinitdata struct ipmi_default_vals
2991 {
2992         int type;
2993         int port;
2994 } ipmi_defaults[] =
2995 {
2996         { .type = SI_KCS, .port = 0xca2 },
2997         { .type = SI_SMIC, .port = 0xca9 },
2998         { .type = SI_BT, .port = 0xe4 },
2999         { .port = 0 }
3000 };
3001
3002 static __devinit void default_find_bmc(void)
3003 {
3004         struct smi_info *info;
3005         int             i;
3006
3007         for (i = 0; ; i++) {
3008                 if (!ipmi_defaults[i].port)
3009                         break;
3010 #ifdef CONFIG_PPC
3011                 if (check_legacy_ioport(ipmi_defaults[i].port))
3012                         continue;
3013 #endif
3014                 info = kzalloc(sizeof(*info), GFP_KERNEL);
3015                 if (!info)
3016                         return;
3017
3018                 info->addr_source = SI_DEFAULT;
3019
3020                 info->si_type = ipmi_defaults[i].type;
3021                 info->io_setup = port_setup;
3022                 info->io.addr_data = ipmi_defaults[i].port;
3023                 info->io.addr_type = IPMI_IO_ADDR_SPACE;
3024
3025                 info->io.addr = NULL;
3026                 info->io.regspacing = DEFAULT_REGSPACING;
3027                 info->io.regsize = DEFAULT_REGSPACING;
3028                 info->io.regshift = 0;
3029
3030                 if (add_smi(info) == 0) {
3031                         if ((try_smi_init(info)) == 0) {
3032                                 /* Found one... */
3033                                 printk(KERN_INFO PFX "Found default %s"
3034                                 " state machine at %s address 0x%lx\n",
3035                                 si_to_str[info->si_type],
3036                                 addr_space_to_str[info->io.addr_type],
3037                                 info->io.addr_data);
3038                         } else
3039                                 cleanup_one_si(info);
3040                 } else {
3041                         kfree(info);
3042                 }
3043         }
3044 }
3045
3046 static int is_new_interface(struct smi_info *info)
3047 {
3048         struct smi_info *e;
3049
3050         list_for_each_entry(e, &smi_infos, link) {
3051                 if (e->io.addr_type != info->io.addr_type)
3052                         continue;
3053                 if (e->io.addr_data == info->io.addr_data)
3054                         return 0;
3055         }
3056
3057         return 1;
3058 }
3059
3060 static int add_smi(struct smi_info *new_smi)
3061 {
3062         int rv = 0;
3063
3064         printk(KERN_INFO PFX "Adding %s-specified %s state machine",
3065                         ipmi_addr_src_to_str[new_smi->addr_source],
3066                         si_to_str[new_smi->si_type]);
3067         mutex_lock(&smi_infos_lock);
3068         if (!is_new_interface(new_smi)) {
3069                 printk(KERN_CONT " duplicate interface\n");
3070                 rv = -EBUSY;
3071                 goto out_err;
3072         }
3073
3074         printk(KERN_CONT "\n");
3075
3076         /* So we know not to free it unless we have allocated one. */
3077         new_smi->intf = NULL;
3078         new_smi->si_sm = NULL;
3079         new_smi->handlers = NULL;
3080
3081         list_add_tail(&new_smi->link, &smi_infos);
3082
3083 out_err:
3084         mutex_unlock(&smi_infos_lock);
3085         return rv;
3086 }
3087
3088 static int try_smi_init(struct smi_info *new_smi)
3089 {
3090         int rv = 0;
3091         int i;
3092
3093         printk(KERN_INFO PFX "Trying %s-specified %s state"
3094                " machine at %s address 0x%lx, slave address 0x%x,"
3095                " irq %d\n",
3096                ipmi_addr_src_to_str[new_smi->addr_source],
3097                si_to_str[new_smi->si_type],
3098                addr_space_to_str[new_smi->io.addr_type],
3099                new_smi->io.addr_data,
3100                new_smi->slave_addr, new_smi->irq);
3101
3102         switch (new_smi->si_type) {
3103         case SI_KCS:
3104                 new_smi->handlers = &kcs_smi_handlers;
3105                 break;
3106
3107         case SI_SMIC:
3108                 new_smi->handlers = &smic_smi_handlers;
3109                 break;
3110
3111         case SI_BT:
3112                 new_smi->handlers = &bt_smi_handlers;
3113                 break;
3114
3115         default:
3116                 /* No support for anything else yet. */
3117                 rv = -EIO;
3118                 goto out_err;
3119         }
3120
3121         /* Allocate the state machine's data and initialize it. */
3122         new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL);
3123         if (!new_smi->si_sm) {
3124                 printk(KERN_ERR PFX
3125                        "Could not allocate state machine memory\n");
3126                 rv = -ENOMEM;
3127                 goto out_err;
3128         }
3129         new_smi->io_size = new_smi->handlers->init_data(new_smi->si_sm,
3130                                                         &new_smi->io);
3131
3132         /* Now that we know the I/O size, we can set up the I/O. */
3133         rv = new_smi->io_setup(new_smi);
3134         if (rv) {
3135                 printk(KERN_ERR PFX "Could not set up I/O space\n");
3136                 goto out_err;
3137         }
3138
3139         spin_lock_init(&(new_smi->si_lock));
3140         spin_lock_init(&(new_smi->msg_lock));
3141
3142         /* Do low-level detection first. */
3143         if (new_smi->handlers->detect(new_smi->si_sm)) {
3144                 if (new_smi->addr_source)
3145                         printk(KERN_INFO PFX "Interface detection failed\n");
3146                 rv = -ENODEV;
3147                 goto out_err;
3148         }
3149
3150         /*
3151          * Attempt a get device id command.  If it fails, we probably
3152          * don't have a BMC here.
3153          */
3154         rv = try_get_dev_id(new_smi);
3155         if (rv) {
3156                 if (new_smi->addr_source)
3157                         printk(KERN_INFO PFX "There appears to be no BMC"
3158                                " at this location\n");
3159                 goto out_err;
3160         }
3161
3162         setup_oem_data_handler(new_smi);
3163         setup_xaction_handlers(new_smi);
3164
3165         INIT_LIST_HEAD(&(new_smi->xmit_msgs));
3166         INIT_LIST_HEAD(&(new_smi->hp_xmit_msgs));
3167         new_smi->curr_msg = NULL;
3168         atomic_set(&new_smi->req_events, 0);
3169         new_smi->run_to_completion = 0;
3170         for (i = 0; i < SI_NUM_STATS; i++)
3171                 atomic_set(&new_smi->stats[i], 0);
3172
3173         new_smi->interrupt_disabled = 1;
3174         atomic_set(&new_smi->stop_operation, 0);
3175         new_smi->intf_num = smi_num;
3176         smi_num++;
3177
3178         rv = try_enable_event_buffer(new_smi);
3179         if (rv == 0)
3180                 new_smi->has_event_buffer = 1;
3181
3182         /*
3183          * Start clearing the flags before we enable interrupts or the
3184          * timer to avoid racing with the timer.
3185          */
3186         start_clear_flags(new_smi);
3187         /* IRQ is defined to be set when non-zero. */
3188         if (new_smi->irq)
3189                 new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ;
3190
3191         if (!new_smi->dev) {
3192                 /*
3193                  * If we don't already have a device from something
3194                  * else (like PCI), then register a new one.
3195                  */
3196                 new_smi->pdev = platform_device_alloc("ipmi_si",
3197                                                       new_smi->intf_num);
3198                 if (!new_smi->pdev) {
3199                         printk(KERN_ERR PFX
3200                                "Unable to allocate platform device\n");
3201                         goto out_err;
3202                 }
3203                 new_smi->dev = &new_smi->pdev->dev;
3204                 new_smi->dev->driver = &ipmi_driver.driver;
3205
3206                 rv = platform_device_add(new_smi->pdev);
3207                 if (rv) {
3208                         printk(KERN_ERR PFX
3209                                "Unable to register system interface device:"
3210                                " %d\n",
3211                                rv);
3212                         goto out_err;
3213                 }
3214                 new_smi->dev_registered = 1;
3215         }
3216
3217         rv = ipmi_register_smi(&handlers,
3218                                new_smi,
3219                                &new_smi->device_id,
3220                                new_smi->dev,
3221                                "bmc",
3222                                new_smi->slave_addr);
3223         if (rv) {
3224                 dev_err(new_smi->dev, "Unable to register device: error %d\n",
3225                         rv);
3226                 goto out_err_stop_timer;
3227         }
3228
3229         rv = ipmi_smi_add_proc_entry(new_smi->intf, "type",
3230                                      type_file_read_proc,
3231                                      new_smi);
3232         if (rv) {
3233                 dev_err(new_smi->dev, "Unable to create proc entry: %d\n", rv);
3234                 goto out_err_stop_timer;
3235         }
3236
3237         rv = ipmi_smi_add_proc_entry(new_smi->intf, "si_stats",
3238                                      stat_file_read_proc,
3239                                      new_smi);
3240         if (rv) {
3241                 dev_err(new_smi->dev, "Unable to create proc entry: %d\n", rv);
3242                 goto out_err_stop_timer;
3243         }
3244
3245         rv = ipmi_smi_add_proc_entry(new_smi->intf, "params",
3246                                      param_read_proc,
3247                                      new_smi);
3248         if (rv) {
3249                 dev_err(new_smi->dev, "Unable to create proc entry: %d\n", rv);
3250                 goto out_err_stop_timer;
3251         }
3252
3253         dev_info(new_smi->dev, "IPMI %s interface initialized\n",
3254                  si_to_str[new_smi->si_type]);
3255
3256         return 0;
3257
3258  out_err_stop_timer:
3259         atomic_inc(&new_smi->stop_operation);
3260         wait_for_timer_and_thread(new_smi);
3261
3262  out_err:
3263         new_smi->interrupt_disabled = 1;
3264
3265         if (new_smi->intf) {
3266                 ipmi_unregister_smi(new_smi->intf);
3267                 new_smi->intf = NULL;
3268         }
3269
3270         if (new_smi->irq_cleanup) {
3271                 new_smi->irq_cleanup(new_smi);
3272                 new_smi->irq_cleanup = NULL;
3273         }
3274
3275         /*
3276          * Wait until we know that we are out of any interrupt
3277          * handlers might have been running before we freed the
3278          * interrupt.
3279          */
3280         synchronize_sched();
3281
3282         if (new_smi->si_sm) {
3283                 if (new_smi->handlers)
3284                         new_smi->handlers->cleanup(new_smi->si_sm);
3285                 kfree(new_smi->si_sm);
3286                 new_smi->si_sm = NULL;
3287         }
3288         if (new_smi->addr_source_cleanup) {
3289                 new_smi->addr_source_cleanup(new_smi);
3290                 new_smi->addr_source_cleanup = NULL;
3291         }
3292         if (new_smi->io_cleanup) {
3293                 new_smi->io_cleanup(new_smi);
3294                 new_smi->io_cleanup = NULL;
3295         }
3296
3297         if (new_smi->dev_registered) {
3298                 platform_device_unregister(new_smi->pdev);
3299                 new_smi->dev_registered = 0;
3300         }
3301
3302         return rv;
3303 }
3304
3305 static __devinit int init_ipmi_si(void)
3306 {
3307         int  i;
3308         char *str;
3309         int  rv;
3310         struct smi_info *e;
3311         enum ipmi_addr_src type = SI_INVALID;
3312
3313         if (initialized)
3314                 return 0;
3315         initialized = 1;
3316
3317         /* Register the device drivers. */
3318         rv = driver_register(&ipmi_driver.driver);
3319         if (rv) {
3320                 printk(KERN_ERR PFX "Unable to register driver: %d\n", rv);
3321                 return rv;
3322         }
3323
3324
3325         /* Parse out the si_type string into its components. */
3326         str = si_type_str;
3327         if (*str != '\0') {
3328                 for (i = 0; (i < SI_MAX_PARMS) && (*str != '\0'); i++) {
3329                         si_type[i] = str;
3330                         str = strchr(str, ',');
3331                         if (str) {
3332                                 *str = '\0';
3333                                 str++;
3334                         } else {
3335                                 break;
3336                         }
3337                 }
3338         }
3339
3340         printk(KERN_INFO "IPMI System Interface driver.\n");
3341
3342         hardcode_find_bmc();
3343
3344         /* If the user gave us a device, they presumably want us to use it */
3345         mutex_lock(&smi_infos_lock);
3346         if (!list_empty(&smi_infos)) {
3347                 mutex_unlock(&smi_infos_lock);
3348                 return 0;
3349         }
3350         mutex_unlock(&smi_infos_lock);
3351
3352 #ifdef CONFIG_PCI
3353         rv = pci_register_driver(&ipmi_pci_driver);
3354         if (rv)
3355                 printk(KERN_ERR PFX "Unable to register PCI driver: %d\n", rv);
3356         else
3357                 pci_registered = 1;
3358 #endif
3359
3360 #ifdef CONFIG_ACPI
3361         pnp_register_driver(&ipmi_pnp_driver);
3362 #endif
3363
3364 #ifdef CONFIG_DMI
3365         dmi_find_bmc();
3366 #endif
3367
3368 #ifdef CONFIG_ACPI
3369         spmi_find_bmc();
3370 #endif
3371
3372 #ifdef CONFIG_PPC_OF
3373         of_register_platform_driver(&ipmi_of_platform_driver);
3374         of_registered = 1;
3375 #endif
3376
3377         /* We prefer devices with interrupts, but in the case of a machine
3378            with multiple BMCs we assume that there will be several instances
3379            of a given type so if we succeed in registering a type then also
3380            try to register everything else of the same type */
3381
3382         mutex_lock(&smi_infos_lock);
3383         list_for_each_entry(e, &smi_infos, link) {
3384                 /* Try to register a device if it has an IRQ and we either
3385                    haven't successfully registered a device yet or this
3386                    device has the same type as one we successfully registered */
3387                 if (e->irq && (!type || e->addr_source == type)) {
3388                         if (!try_smi_init(e)) {
3389                                 type = e->addr_source;
3390                         }
3391                 }
3392         }
3393
3394         /* type will only have been set if we successfully registered an si */
3395         if (type) {
3396                 mutex_unlock(&smi_infos_lock);
3397                 return 0;
3398         }
3399
3400         /* Fall back to the preferred device */
3401
3402         list_for_each_entry(e, &smi_infos, link) {
3403                 if (!e->irq && (!type || e->addr_source == type)) {
3404                         if (!try_smi_init(e)) {
3405                                 type = e->addr_source;
3406                         }
3407                 }
3408         }
3409         mutex_unlock(&smi_infos_lock);
3410
3411         if (type)
3412                 return 0;
3413
3414         if (si_trydefaults) {
3415                 mutex_lock(&smi_infos_lock);
3416                 if (list_empty(&smi_infos)) {
3417                         /* No BMC was found, try defaults. */
3418                         mutex_unlock(&smi_infos_lock);
3419                         default_find_bmc();
3420                 } else
3421                         mutex_unlock(&smi_infos_lock);
3422         }
3423
3424         mutex_lock(&smi_infos_lock);
3425         if (unload_when_empty && list_empty(&smi_infos)) {
3426                 mutex_unlock(&smi_infos_lock);
3427 #ifdef CONFIG_PCI
3428                 if (pci_registered)
3429                         pci_unregister_driver(&ipmi_pci_driver);
3430 #endif
3431
3432 #ifdef CONFIG_PPC_OF
3433                 if (of_registered)
3434                         of_unregister_platform_driver(&ipmi_of_platform_driver);
3435 #endif
3436                 driver_unregister(&ipmi_driver.driver);
3437                 printk(KERN_WARNING PFX
3438                        "Unable to find any System Interface(s)\n");
3439                 return -ENODEV;
3440         } else {
3441                 mutex_unlock(&smi_infos_lock);
3442                 return 0;
3443         }
3444 }
3445 module_init(init_ipmi_si);
3446
3447 static void cleanup_one_si(struct smi_info *to_clean)
3448 {
3449         int           rv = 0;
3450         unsigned long flags;
3451
3452         if (!to_clean)
3453                 return;
3454
3455         list_del(&to_clean->link);
3456
3457         /* Tell the driver that we are shutting down. */
3458         atomic_inc(&to_clean->stop_operation);
3459
3460         /*
3461          * Make sure the timer and thread are stopped and will not run
3462          * again.
3463          */
3464         wait_for_timer_and_thread(to_clean);
3465
3466         /*
3467          * Timeouts are stopped, now make sure the interrupts are off
3468          * for the device.  A little tricky with locks to make sure
3469          * there are no races.
3470          */
3471         spin_lock_irqsave(&to_clean->si_lock, flags);
3472         while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
3473                 spin_unlock_irqrestore(&to_clean->si_lock, flags);
3474                 poll(to_clean);
3475                 schedule_timeout_uninterruptible(1);
3476                 spin_lock_irqsave(&to_clean->si_lock, flags);
3477         }
3478         disable_si_irq(to_clean);
3479         spin_unlock_irqrestore(&to_clean->si_lock, flags);
3480         while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
3481                 poll(to_clean);
3482                 schedule_timeout_uninterruptible(1);
3483         }
3484
3485         /* Clean up interrupts and make sure that everything is done. */
3486         if (to_clean->irq_cleanup)
3487                 to_clean->irq_cleanup(to_clean);
3488         while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) {
3489                 poll(to_clean);
3490                 schedule_timeout_uninterruptible(1);
3491         }
3492
3493         if (to_clean->intf)
3494                 rv = ipmi_unregister_smi(to_clean->intf);
3495
3496         if (rv) {
3497                 printk(KERN_ERR PFX "Unable to unregister device: errno=%d\n",
3498                        rv);
3499         }
3500
3501         if (to_clean->handlers)
3502                 to_clean->handlers->cleanup(to_clean->si_sm);
3503
3504         kfree(to_clean->si_sm);
3505
3506         if (to_clean->addr_source_cleanup)
3507                 to_clean->addr_source_cleanup(to_clean);
3508         if (to_clean->io_cleanup)
3509                 to_clean->io_cleanup(to_clean);
3510
3511         if (to_clean->dev_registered)
3512                 platform_device_unregister(to_clean->pdev);
3513
3514         kfree(to_clean);
3515 }
3516
3517 static __exit void cleanup_ipmi_si(void)
3518 {
3519         struct smi_info *e, *tmp_e;
3520
3521         if (!initialized)
3522                 return;
3523
3524 #ifdef CONFIG_PCI
3525         if (pci_registered)
3526                 pci_unregister_driver(&ipmi_pci_driver);
3527 #endif
3528 #ifdef CONFIG_ACPI
3529         pnp_unregister_driver(&ipmi_pnp_driver);
3530 #endif
3531
3532 #ifdef CONFIG_PPC_OF
3533         if (of_registered)
3534                 of_unregister_platform_driver(&ipmi_of_platform_driver);
3535 #endif
3536
3537         mutex_lock(&smi_infos_lock);
3538         list_for_each_entry_safe(e, tmp_e, &smi_infos, link)
3539                 cleanup_one_si(e);
3540         mutex_unlock(&smi_infos_lock);
3541
3542         driver_unregister(&ipmi_driver.driver);
3543 }
3544 module_exit(cleanup_ipmi_si);
3545
3546 MODULE_LICENSE("GPL");
3547 MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
3548 MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT"
3549                    " system interfaces.");