drivers/bluetooth/ath3k.c

   1 /*
   2  * Copyright (c) 2008-2009 Atheros Communications Inc.
   3  *
   4  *  This program is free software; you can redistribute it and/or modify
   5  *  it under the terms of the GNU General Public License as published by
   6  *  the Free Software Foundation; either version 2 of the License, or
   7  *  (at your option) any later version.
   8  *
   9  *  This program is distributed in the hope that it will be useful,
  10  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  *  GNU General Public License for more details.
  13  *
  14  *  You should have received a copy of the GNU General Public License
  15  *  along with this program; if not, write to the Free Software
  16  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  17  *
  18  */
  19
  20
  21 #include <linux/module.h>
  22 #include <linux/kernel.h>
  23 #include <linux/init.h>
  24 #include <linux/slab.h>
  25 #include <linux/types.h>
  26 #include <linux/errno.h>
  27 #include <linux/device.h>
  28 #include <linux/firmware.h>
  29 #include <linux/usb.h>
  30 #include <net/bluetooth/bluetooth.h>
  31
  32 #define VERSION "1.0"
  33 #define ATH3K_FIRMWARE  "ath3k-1.fw"
  34
  35 #define ATH3K_DNLOAD                            0x01
  36 #define ATH3K_GETSTATE                          0x05
  37 #define ATH3K_SET_NORMAL_MODE                   0x07
  38 #define ATH3K_GETVERSION                        0x09
  39 #define USB_REG_SWITCH_VID_PID                  0x0a
  40
  41 #define ATH3K_MODE_MASK                         0x3F
  42 #define ATH3K_NORMAL_MODE                       0x0E
  43
  44 #define ATH3K_PATCH_UPDATE                      0x80
  45 #define ATH3K_SYSCFG_UPDATE                     0x40
  46
  47 #define ATH3K_XTAL_FREQ_26M                     0x00
  48 #define ATH3K_XTAL_FREQ_40M                     0x01
  49 #define ATH3K_XTAL_FREQ_19P2                    0x02
  50 #define ATH3K_NAME_LEN                          0xFF
  51
  52 struct ath3k_version {
  53         unsigned int    rom_version;
  54         unsigned int    build_version;
  55         unsigned int    ram_version;
  56         unsigned char   ref_clock;
  57         unsigned char   reserved[0x07];
  58 };
  59
  60 static struct usb_device_id ath3k_table[] = {
  61         /* Atheros AR3011 */
  62         { USB_DEVICE(0x0CF3, 0x3000) },
  63
  64         /* Atheros AR3011 with sflash firmware*/
  65         { USB_DEVICE(0x0CF3, 0x3002) },
  66         { USB_DEVICE(0x0CF3, 0xE019) },
  67         { USB_DEVICE(0x13d3, 0x3304) },
  68         { USB_DEVICE(0x0930, 0x0215) },
  69         { USB_DEVICE(0x0489, 0xE03D) },
  70         { USB_DEVICE(0x0489, 0xE027) },
  71
  72         /* Atheros AR9285 Malbec with sflash firmware */
  73         { USB_DEVICE(0x03F0, 0x311D) },
  74
  75         /* Atheros AR3012 with sflash firmware*/
  76         { USB_DEVICE(0x0CF3, 0x0036) },
  77         { USB_DEVICE(0x0CF3, 0x3004) },
  78         { USB_DEVICE(0x0CF3, 0x3008) },
  79         { USB_DEVICE(0x0CF3, 0x311D) },
  80         { USB_DEVICE(0x0CF3, 0x817a) },
  81         { USB_DEVICE(0x13d3, 0x3375) },
  82         { USB_DEVICE(0x04CA, 0x3004) },
  83         { USB_DEVICE(0x04CA, 0x3005) },
  84         { USB_DEVICE(0x04CA, 0x3006) },
  85         { USB_DEVICE(0x04CA, 0x3008) },
  86         { USB_DEVICE(0x13d3, 0x3362) },
  87         { USB_DEVICE(0x0CF3, 0xE004) },
  88         { USB_DEVICE(0x0930, 0x0219) },
  89         { USB_DEVICE(0x0489, 0xe057) },
  90         { USB_DEVICE(0x13d3, 0x3393) },
  91         { USB_DEVICE(0x0489, 0xe04e) },
  92         { USB_DEVICE(0x0489, 0xe056) },
  93
  94         /* Atheros AR5BBU12 with sflash firmware */
  95         { USB_DEVICE(0x0489, 0xE02C) },
  96
  97         /* Atheros AR5BBU22 with sflash firmware */
  98         { USB_DEVICE(0x0489, 0xE03C) },
  99         { USB_DEVICE(0x0489, 0xE036) },
 100
 101         { }     /* Terminating entry */
 102 };
 103
 104 MODULE_DEVICE_TABLE(usb, ath3k_table);
 105
 106 #define BTUSB_ATH3012           0x80
 107 /* This table is to load patch and sysconfig files
 108  * for AR3012 */
 109 static struct usb_device_id ath3k_blist_tbl[] = {
 110
 111         /* Atheros AR3012 with sflash firmware*/
 112         { USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
 113         { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
 114         { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
 115         { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
 116         { USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
 117         { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
 118         { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
 119         { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
 120         { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
 121         { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
 122         { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 123         { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
 124         { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 125         { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
 126         { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 127         { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
 128         { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
 129
 130         /* Atheros AR5BBU22 with sflash firmware */
 131         { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
 132         { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
 133
 134         { }     /* Terminating entry */
 135 };
 136
 137 #define USB_REQ_DFU_DNLOAD      1
 138 #define BULK_SIZE               4096
 139 #define FW_HDR_SIZE             20
 140
 141 static int ath3k_load_firmware(struct usb_device *udev,
 142                                 const struct firmware *firmware)
 143 {
 144         u8 *send_buf;
 145         int err, pipe, len, size, sent = 0;
 146         int count = firmware->size;
 147
 148         BT_DBG("udev %p", udev);
 149
 150         pipe = usb_sndctrlpipe(udev, 0);
 151
 152         send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
 153         if (!send_buf) {
 154                 BT_ERR("Can't allocate memory chunk for firmware");
 155                 return -ENOMEM;
 156         }
 157
 158         memcpy(send_buf, firmware->data, 20);
 159         if ((err = usb_control_msg(udev, pipe,
 160                                 USB_REQ_DFU_DNLOAD,
 161                                 USB_TYPE_VENDOR, 0, 0,
 162                                 send_buf, 20, USB_CTRL_SET_TIMEOUT)) < 0) {
 163                 BT_ERR("Can't change to loading configuration err");
 164                 goto error;
 165         }
 166         sent += 20;
 167         count -= 20;
 168
 169         while (count) {
 170                 size = min_t(uint, count, BULK_SIZE);
 171                 pipe = usb_sndbulkpipe(udev, 0x02);
 172                 memcpy(send_buf, firmware->data + sent, size);
 173
 174                 err = usb_bulk_msg(udev, pipe, send_buf, size,
 175                                         &len, 3000);
 176
 177                 if (err || (len != size)) {
 178                         BT_ERR("Error in firmware loading err = %d,"
 179                                 "len = %d, size = %d", err, len, size);
 180                         goto error;
 181                 }
 182
 183                 sent  += size;
 184                 count -= size;
 185         }
 186
 187 error:
 188         kfree(send_buf);
 189         return err;
 190 }
 191
 192 static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
 193 {
 194         int pipe = 0;
 195
 196         pipe = usb_rcvctrlpipe(udev, 0);
 197         return usb_control_msg(udev, pipe, ATH3K_GETSTATE,
 198                         USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
 199                         state, 0x01, USB_CTRL_SET_TIMEOUT);
 200 }
 201
 202 static int ath3k_get_version(struct usb_device *udev,
 203                         struct ath3k_version *version)
 204 {
 205         int pipe = 0;
 206
 207         pipe = usb_rcvctrlpipe(udev, 0);
 208         return usb_control_msg(udev, pipe, ATH3K_GETVERSION,
 209                         USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, version,
 210                         sizeof(struct ath3k_version),
 211                         USB_CTRL_SET_TIMEOUT);
 212 }
 213
 214 static int ath3k_load_fwfile(struct usb_device *udev,
 215                 const struct firmware *firmware)
 216 {
 217         u8 *send_buf;
 218         int err, pipe, len, size, count, sent = 0;
 219         int ret;
 220
 221         count = firmware->size;
 222
 223         send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
 224         if (!send_buf) {
 225                 BT_ERR("Can't allocate memory chunk for firmware");
 226                 return -ENOMEM;
 227         }
 228
 229         size = min_t(uint, count, FW_HDR_SIZE);
 230         memcpy(send_buf, firmware->data, size);
 231
 232         pipe = usb_sndctrlpipe(udev, 0);
 233         ret = usb_control_msg(udev, pipe, ATH3K_DNLOAD,
 234                         USB_TYPE_VENDOR, 0, 0, send_buf,
 235                         size, USB_CTRL_SET_TIMEOUT);
 236         if (ret < 0) {
 237                 BT_ERR("Can't change to loading configuration err");
 238                 kfree(send_buf);
 239                 return ret;
 240         }
 241
 242         sent += size;
 243         count -= size;
 244
 245         while (count) {
 246                 size = min_t(uint, count, BULK_SIZE);
 247                 pipe = usb_sndbulkpipe(udev, 0x02);
 248
 249                 memcpy(send_buf, firmware->data + sent, size);
 250
 251                 err = usb_bulk_msg(udev, pipe, send_buf, size,
 252                                         &len, 3000);
 253                 if (err || (len != size)) {
 254                         BT_ERR("Error in firmware loading err = %d,"
 255                                 "len = %d, size = %d", err, len, size);
 256                         kfree(send_buf);
 257                         return err;
 258                 }
 259                 sent  += size;
 260                 count -= size;
 261         }
 262
 263         kfree(send_buf);
 264         return 0;
 265 }
 266
 267 static int ath3k_switch_pid(struct usb_device *udev)
 268 {
 269         int pipe = 0;
 270
 271         pipe = usb_sndctrlpipe(udev, 0);
 272         return usb_control_msg(udev, pipe, USB_REG_SWITCH_VID_PID,
 273                         USB_TYPE_VENDOR, 0, 0,
 274                         NULL, 0, USB_CTRL_SET_TIMEOUT);
 275 }
 276
 277 static int ath3k_set_normal_mode(struct usb_device *udev)
 278 {
 279         unsigned char fw_state;
 280         int pipe = 0, ret;
 281
 282         ret = ath3k_get_state(udev, &fw_state);
 283         if (ret < 0) {
 284                 BT_ERR("Can't get state to change to normal mode err");
 285                 return ret;
 286         }
 287
 288         if ((fw_state & ATH3K_MODE_MASK) == ATH3K_NORMAL_MODE) {
 289                 BT_DBG("firmware was already in normal mode");
 290                 return 0;
 291         }
 292
 293         pipe = usb_sndctrlpipe(udev, 0);
 294         return usb_control_msg(udev, pipe, ATH3K_SET_NORMAL_MODE,
 295                         USB_TYPE_VENDOR, 0, 0,
 296                         NULL, 0, USB_CTRL_SET_TIMEOUT);
 297 }
 298
 299 static int ath3k_load_patch(struct usb_device *udev)
 300 {
 301         unsigned char fw_state;
 302         char filename[ATH3K_NAME_LEN] = {0};
 303         const struct firmware *firmware;
 304         struct ath3k_version fw_version, pt_version;
 305         int ret;
 306
 307         ret = ath3k_get_state(udev, &fw_state);
 308         if (ret < 0) {
 309                 BT_ERR("Can't get state to change to load ram patch err");
 310                 return ret;
 311         }
 312
 313         if (fw_state & ATH3K_PATCH_UPDATE) {
 314                 BT_DBG("Patch was already downloaded");
 315                 return 0;
 316         }
 317
 318         ret = ath3k_get_version(udev, &fw_version);
 319         if (ret < 0) {
 320                 BT_ERR("Can't get version to change to load ram patch err");
 321                 return ret;
 322         }
 323
 324         snprintf(filename, ATH3K_NAME_LEN, "ar3k/AthrBT_0x%08x.dfu",
 325                 fw_version.rom_version);
 326
 327         ret = request_firmware(&firmware, filename, &udev->dev);
 328         if (ret < 0) {
 329                 BT_ERR("Patch file not found %s", filename);
 330                 return ret;
 331         }
 332
 333         pt_version.rom_version = *(int *)(firmware->data + firmware->size - 8);
 334         pt_version.build_version = *(int *)
 335                 (firmware->data + firmware->size - 4);
 336
 337         if ((pt_version.rom_version != fw_version.rom_version) ||
 338                 (pt_version.build_version <= fw_version.build_version)) {
 339                 BT_ERR("Patch file version did not match with firmware");
 340                 release_firmware(firmware);
 341                 return -EINVAL;
 342         }
 343
 344         ret = ath3k_load_fwfile(udev, firmware);
 345         release_firmware(firmware);
 346
 347         return ret;
 348 }
 349
 350 static int ath3k_load_syscfg(struct usb_device *udev)
 351 {
 352         unsigned char fw_state;
 353         char filename[ATH3K_NAME_LEN] = {0};
 354         const struct firmware *firmware;
 355         struct ath3k_version fw_version;
 356         int clk_value, ret;
 357
 358         ret = ath3k_get_state(udev, &fw_state);
 359         if (ret < 0) {
 360                 BT_ERR("Can't get state to change to load configration err");
 361                 return -EBUSY;
 362         }
 363
 364         ret = ath3k_get_version(udev, &fw_version);
 365         if (ret < 0) {
 366                 BT_ERR("Can't get version to change to load ram patch err");
 367                 return ret;
 368         }
 369
 370         switch (fw_version.ref_clock) {
 371
 372         case ATH3K_XTAL_FREQ_26M:
 373                 clk_value = 26;
 374                 break;
 375         case ATH3K_XTAL_FREQ_40M:
 376                 clk_value = 40;
 377                 break;
 378         case ATH3K_XTAL_FREQ_19P2:
 379                 clk_value = 19;
 380                 break;
 381         default:
 382                 clk_value = 0;
 383                 break;
 384         }
 385
 386         snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
 387                 fw_version.rom_version, clk_value, ".dfu");
 388
 389         ret = request_firmware(&firmware, filename, &udev->dev);
 390         if (ret < 0) {
 391                 BT_ERR("Configuration file not found %s", filename);
 392                 return ret;
 393         }
 394
 395         ret = ath3k_load_fwfile(udev, firmware);
 396         release_firmware(firmware);
 397
 398         return ret;
 399 }
 400
 401 static int ath3k_probe(struct usb_interface *intf,
 402                         const struct usb_device_id *id)
 403 {
 404         const struct firmware *firmware;
 405         struct usb_device *udev = interface_to_usbdev(intf);
 406         int ret;
 407
 408         BT_DBG("intf %p id %p", intf, id);
 409
 410         if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
 411                 return -ENODEV;
 412
 413         /* match device ID in ath3k blacklist table */
 414         if (!id->driver_info) {
 415                 const struct usb_device_id *match;
 416                 match = usb_match_id(intf, ath3k_blist_tbl);
 417                 if (match)
 418                         id = match;
 419         }
 420
 421         /* load patch and sysconfig files for AR3012 */
 422         if (id->driver_info & BTUSB_ATH3012) {
 423
 424                 /* New firmware with patch and sysconfig files already loaded */
 425                 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001)
 426                         return -ENODEV;
 427
 428                 ret = ath3k_load_patch(udev);
 429                 if (ret < 0) {
 430                         BT_ERR("Loading patch file failed");
 431                         return ret;
 432                 }
 433                 ret = ath3k_load_syscfg(udev);
 434                 if (ret < 0) {
 435                         BT_ERR("Loading sysconfig file failed");
 436                         return ret;
 437                 }
 438                 ret = ath3k_set_normal_mode(udev);
 439                 if (ret < 0) {
 440                         BT_ERR("Set normal mode failed");
 441                         return ret;
 442                 }
 443                 ath3k_switch_pid(udev);
 444                 return 0;
 445         }
 446
 447         ret = request_firmware(&firmware, ATH3K_FIRMWARE, &udev->dev);
 448         if (ret < 0) {
 449                 if (ret == -ENOENT)
 450                         BT_ERR("Firmware file \"%s\" not found",
 451                                                         ATH3K_FIRMWARE);
 452                 else
 453                         BT_ERR("Firmware file \"%s\" request failed (err=%d)",
 454                                                         ATH3K_FIRMWARE, ret);
 455                 return ret;
 456         }
 457
 458         ret = ath3k_load_firmware(udev, firmware);
 459         release_firmware(firmware);
 460
 461         return ret;
 462 }
 463
 464 static void ath3k_disconnect(struct usb_interface *intf)
 465 {
 466         BT_DBG("ath3k_disconnect intf %p", intf);
 467 }
 468
 469 static struct usb_driver ath3k_driver = {
 470         .name           = "ath3k",
 471         .probe          = ath3k_probe,
 472         .disconnect     = ath3k_disconnect,
 473         .id_table       = ath3k_table,
 474         .disable_hub_initiated_lpm = 1,
 475 };
 476
 477 module_usb_driver(ath3k_driver);
 478
 479 MODULE_AUTHOR("Atheros Communications");
 480 MODULE_DESCRIPTION("Atheros AR30xx firmware driver");
 481 MODULE_VERSION(VERSION);
 482 MODULE_LICENSE("GPL");
 483 MODULE_FIRMWARE(ATH3K_FIRMWARE);