V4L/DVB (11743): Analog Devices ADV7343 video encoder driver
[pandora-kernel.git] / drivers / block / cciss.h
1 #ifndef CCISS_H
2 #define CCISS_H
3
4 #include <linux/genhd.h>
5
6 #include "cciss_cmd.h"
7
8
9 #define NWD_SHIFT       4
10 #define MAX_PART        (1 << NWD_SHIFT)
11
12 #define IO_OK           0
13 #define IO_ERROR        1
14 #define IO_NEEDS_RETRY  3
15
16 #define VENDOR_LEN      8
17 #define MODEL_LEN       16
18 #define REV_LEN         4
19
20 struct ctlr_info;
21 typedef struct ctlr_info ctlr_info_t;
22
23 struct access_method {
24         void (*submit_command)(ctlr_info_t *h, CommandList_struct *c);
25         void (*set_intr_mask)(ctlr_info_t *h, unsigned long val);
26         unsigned long (*fifo_full)(ctlr_info_t *h);
27         unsigned long (*intr_pending)(ctlr_info_t *h);
28         unsigned long (*command_completed)(ctlr_info_t *h);
29 };
30 typedef struct _drive_info_struct
31 {
32         __u32   LunID;  
33         int     usage_count;
34         struct request_queue *queue;
35         sector_t nr_blocks;
36         int     block_size;
37         int     heads;
38         int     sectors;
39         int     cylinders;
40         int     raid_level; /* set to -1 to indicate that
41                              * the drive is not in use/configured
42                              */
43         int     busy_configuring; /* This is set when a drive is being removed
44                                    * to prevent it from being opened or it's
45                                    * queue from being started.
46                                    */
47         struct  device dev;
48         __u8 serial_no[16]; /* from inquiry page 0x83,
49                              * not necc. null terminated.
50                              */
51         char vendor[VENDOR_LEN + 1]; /* SCSI vendor string */
52         char model[MODEL_LEN + 1];   /* SCSI model string */
53         char rev[REV_LEN + 1];       /* SCSI revision string */
54 } drive_info_struct;
55
56 struct ctlr_info 
57 {
58         int     ctlr;
59         char    devname[8];
60         char    *product_name;
61         char    firm_ver[4]; // Firmware version 
62         struct pci_dev *pdev;
63         __u32   board_id;
64         void __iomem *vaddr;
65         unsigned long paddr;
66         int     nr_cmds; /* Number of commands allowed on this controller */
67         CfgTable_struct __iomem *cfgtable;
68         int     interrupts_enabled;
69         int     major;
70         int     max_commands;
71         int     commands_outstanding;
72         int     max_outstanding; /* Debug */ 
73         int     num_luns;
74         int     highest_lun;
75         int     usage_count;  /* number of opens all all minor devices */
76 #       define DOORBELL_INT     0
77 #       define PERF_MODE_INT    1
78 #       define SIMPLE_MODE_INT  2
79 #       define MEMQ_MODE_INT    3
80         unsigned int intr[4];
81         unsigned int msix_vector;
82         unsigned int msi_vector;
83         int     cciss_max_sectors;
84         BYTE    cciss_read;
85         BYTE    cciss_write;
86         BYTE    cciss_read_capacity;
87
88         // information about each logical volume
89         drive_info_struct drv[CISS_MAX_LUN];
90
91         struct access_method access;
92
93         /* queue and queue Info */ 
94         struct hlist_head reqQ;
95         struct hlist_head cmpQ;
96         unsigned int Qdepth;
97         unsigned int maxQsinceinit;
98         unsigned int maxSG;
99         spinlock_t lock;
100
101         //* pointers to command and error info pool */ 
102         CommandList_struct      *cmd_pool;
103         dma_addr_t              cmd_pool_dhandle; 
104         ErrorInfo_struct        *errinfo_pool;
105         dma_addr_t              errinfo_pool_dhandle; 
106         unsigned long           *cmd_pool_bits;
107         int                     nr_allocs;
108         int                     nr_frees; 
109         int                     busy_configuring;
110         int                     busy_initializing;
111
112         /* This element holds the zero based queue number of the last
113          * queue to be started.  It is used for fairness.
114         */
115         int                     next_to_run;
116
117         // Disk structures we need to pass back
118         struct gendisk   *gendisk[CISS_MAX_LUN];
119 #ifdef CONFIG_CISS_SCSI_TAPE
120         void *scsi_ctlr; /* ptr to structure containing scsi related stuff */
121         /* list of block side commands the scsi error handling sucked up */
122         /* and saved for later processing */
123 #endif
124         unsigned char alive;
125         struct completion *rescan_wait;
126         struct task_struct *cciss_scan_thread;
127         struct device dev;
128 };
129
130 /*  Defining the diffent access_menthods */
131 /*
132  * Memory mapped FIFO interface (SMART 53xx cards)
133  */
134 #define SA5_DOORBELL    0x20
135 #define SA5_REQUEST_PORT_OFFSET 0x40
136 #define SA5_REPLY_INTR_MASK_OFFSET      0x34
137 #define SA5_REPLY_PORT_OFFSET           0x44
138 #define SA5_INTR_STATUS         0x30
139 #define SA5_SCRATCHPAD_OFFSET   0xB0
140
141 #define SA5_CTCFG_OFFSET        0xB4
142 #define SA5_CTMEM_OFFSET        0xB8
143
144 #define SA5_INTR_OFF            0x08
145 #define SA5B_INTR_OFF           0x04
146 #define SA5_INTR_PENDING        0x08
147 #define SA5B_INTR_PENDING       0x04
148 #define FIFO_EMPTY              0xffffffff      
149 #define CCISS_FIRMWARE_READY    0xffff0000 /* value in scratchpad register */
150
151 #define  CISS_ERROR_BIT         0x02
152
153 #define CCISS_INTR_ON   1 
154 #define CCISS_INTR_OFF  0
155 /* 
156         Send the command to the hardware 
157 */
158 static void SA5_submit_command( ctlr_info_t *h, CommandList_struct *c) 
159 {
160 #ifdef CCISS_DEBUG
161          printk("Sending %x - down to controller\n", c->busaddr );
162 #endif /* CCISS_DEBUG */ 
163          writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
164          h->commands_outstanding++;
165          if ( h->commands_outstanding > h->max_outstanding)
166                 h->max_outstanding = h->commands_outstanding;
167 }
168
169 /*  
170  *  This card is the opposite of the other cards.  
171  *   0 turns interrupts on... 
172  *   0x08 turns them off... 
173  */
174 static void SA5_intr_mask(ctlr_info_t *h, unsigned long val)
175 {
176         if (val) 
177         { /* Turn interrupts on */
178                 h->interrupts_enabled = 1;
179                 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
180         } else /* Turn them off */
181         {
182                 h->interrupts_enabled = 0;
183                 writel( SA5_INTR_OFF, 
184                         h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
185         }
186 }
187 /*
188  *  This card is the opposite of the other cards.
189  *   0 turns interrupts on...
190  *   0x04 turns them off...
191  */
192 static void SA5B_intr_mask(ctlr_info_t *h, unsigned long val)
193 {
194         if (val)
195         { /* Turn interrupts on */
196                 h->interrupts_enabled = 1;
197                 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
198         } else /* Turn them off */
199         {
200                 h->interrupts_enabled = 0;
201                 writel( SA5B_INTR_OFF,
202                         h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
203         }
204 }
205 /*
206  *  Returns true if fifo is full.  
207  * 
208  */ 
209 static unsigned long SA5_fifo_full(ctlr_info_t *h)
210 {
211         if( h->commands_outstanding >= h->max_commands)
212                 return(1);
213         else 
214                 return(0);
215
216 }
217 /* 
218  *   returns value read from hardware. 
219  *     returns FIFO_EMPTY if there is nothing to read 
220  */ 
221 static unsigned long SA5_completed(ctlr_info_t *h)
222 {
223         unsigned long register_value 
224                 = readl(h->vaddr + SA5_REPLY_PORT_OFFSET);
225         if(register_value != FIFO_EMPTY)
226         {
227                 h->commands_outstanding--;
228 #ifdef CCISS_DEBUG
229                 printk("cciss:  Read %lx back from board\n", register_value);
230 #endif /* CCISS_DEBUG */ 
231         } 
232 #ifdef CCISS_DEBUG
233         else
234         {
235                 printk("cciss:  FIFO Empty read\n");
236         }
237 #endif 
238         return ( register_value); 
239
240 }
241 /*
242  *      Returns true if an interrupt is pending.. 
243  */
244 static unsigned long SA5_intr_pending(ctlr_info_t *h)
245 {
246         unsigned long register_value  = 
247                 readl(h->vaddr + SA5_INTR_STATUS);
248 #ifdef CCISS_DEBUG
249         printk("cciss: intr_pending %lx\n", register_value);
250 #endif  /* CCISS_DEBUG */
251         if( register_value &  SA5_INTR_PENDING) 
252                 return  1;      
253         return 0 ;
254 }
255
256 /*
257  *      Returns true if an interrupt is pending..
258  */
259 static unsigned long SA5B_intr_pending(ctlr_info_t *h)
260 {
261         unsigned long register_value  =
262                 readl(h->vaddr + SA5_INTR_STATUS);
263 #ifdef CCISS_DEBUG
264         printk("cciss: intr_pending %lx\n", register_value);
265 #endif  /* CCISS_DEBUG */
266         if( register_value &  SA5B_INTR_PENDING)
267                 return  1;
268         return 0 ;
269 }
270
271
272 static struct access_method SA5_access = {
273         SA5_submit_command,
274         SA5_intr_mask,
275         SA5_fifo_full,
276         SA5_intr_pending,
277         SA5_completed,
278 };
279
280 static struct access_method SA5B_access = {
281         SA5_submit_command,
282         SA5B_intr_mask,
283         SA5_fifo_full,
284         SA5B_intr_pending,
285         SA5_completed,
286 };
287
288 struct board_type {
289         __u32   board_id;
290         char    *product_name;
291         struct access_method *access;
292         int nr_cmds; /* Max cmds this kind of ctlr can handle. */
293 };
294
295 #define CCISS_LOCK(i)   (&hba[i]->lock)
296
297 #endif /* CCISS_H */
298