drivers/block/cciss.c

   1 /*
   2  *    Disk Array driver for HP SA 5xxx and 6xxx Controllers
   3  *    Copyright 2000, 2006 Hewlett-Packard Development Company, L.P.
   4  *
   5  *    This program is free software; you can redistribute it and/or modify
   6  *    it under the terms of the GNU General Public License as published by
   7  *    the Free Software Foundation; either version 2 of the License, or
   8  *    (at your option) any later version.
   9  *
  10  *    This program is distributed in the hope that it will be useful,
  11  *    but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  13  *    NON INFRINGEMENT.  See the GNU General Public License for more details.
  14  *
  15  *    You should have received a copy of the GNU General Public License
  16  *    along with this program; if not, write to the Free Software
  17  *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  18  *
  19  *    Questions/Comments/Bugfixes to iss_storagedev@hp.com
  20  *
  21  */
  22
  23 #include <linux/module.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/types.h>
  26 #include <linux/pci.h>
  27 #include <linux/kernel.h>
  28 #include <linux/slab.h>
  29 #include <linux/delay.h>
  30 #include <linux/major.h>
  31 #include <linux/fs.h>
  32 #include <linux/bio.h>
  33 #include <linux/blkpg.h>
  34 #include <linux/timer.h>
  35 #include <linux/proc_fs.h>
  36 #include <linux/init.h>
  37 #include <linux/hdreg.h>
  38 #include <linux/spinlock.h>
  39 #include <linux/compat.h>
  40 #include <linux/blktrace_api.h>
  41 #include <asm/uaccess.h>
  42 #include <asm/io.h>
  43
  44 #include <linux/dma-mapping.h>
  45 #include <linux/blkdev.h>
  46 #include <linux/genhd.h>
  47 #include <linux/completion.h>
  48 #include <scsi/scsi.h>
  49 #include <scsi/sg.h>
  50 #include <scsi/scsi_ioctl.h>
  51 #include <linux/cdrom.h>
  52
  53 #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
  54 #define DRIVER_NAME "HP CISS Driver (v 3.6.14)"
  55 #define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,14)
  56
  57 /* Embedded module documentation macros - see modules.h */
  58 MODULE_AUTHOR("Hewlett-Packard Company");
  59 MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.14");
  60 MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
  61                         " SA6i P600 P800 P400 P400i E200 E200i E500");
  62 MODULE_VERSION("3.6.14");
  63 MODULE_LICENSE("GPL");
  64
  65 #include "cciss_cmd.h"
  66 #include "cciss.h"
  67 #include <linux/cciss_ioctl.h>
  68
  69 /* define the PCI info for the cards we can control */
  70 static const struct pci_device_id cciss_pci_device_id[] = {
  71         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISS,  0x0E11, 0x4070},
  72         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4080},
  73         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4082},
  74         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4083},
  75         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x4091},
  76         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409A},
  77         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409B},
  78         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409C},
  79         {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409D},
  80         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSA,     0x103C, 0x3225},
  81         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3223},
  82         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3234},
  83         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3235},
  84         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3211},
  85         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3212},
  86         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3213},
  87         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3214},
  88         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3215},
  89         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3237},
  90         {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x323D},
  91         {PCI_VENDOR_ID_HP,     PCI_ANY_ID,      PCI_ANY_ID, PCI_ANY_ID,
  92                 PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
  93         {0,}
  94 };
  95
  96 MODULE_DEVICE_TABLE(pci, cciss_pci_device_id);
  97
  98 /*  board_id = Subsystem Device ID & Vendor ID
  99  *  product = Marketing Name for the board
 100  *  access = Address of the struct of function pointers
 101  *  nr_cmds = Number of commands supported by controller
 102  */
 103 static struct board_type products[] = {
 104         {0x40700E11, "Smart Array 5300", &SA5_access, 512},
 105         {0x40800E11, "Smart Array 5i", &SA5B_access, 512},
 106         {0x40820E11, "Smart Array 532", &SA5B_access, 512},
 107         {0x40830E11, "Smart Array 5312", &SA5B_access, 512},
 108         {0x409A0E11, "Smart Array 641", &SA5_access, 512},
 109         {0x409B0E11, "Smart Array 642", &SA5_access, 512},
 110         {0x409C0E11, "Smart Array 6400", &SA5_access, 512},
 111         {0x409D0E11, "Smart Array 6400 EM", &SA5_access, 512},
 112         {0x40910E11, "Smart Array 6i", &SA5_access, 512},
 113         {0x3225103C, "Smart Array P600", &SA5_access, 512},
 114         {0x3223103C, "Smart Array P800", &SA5_access, 512},
 115         {0x3234103C, "Smart Array P400", &SA5_access, 512},
 116         {0x3235103C, "Smart Array P400i", &SA5_access, 512},
 117         {0x3211103C, "Smart Array E200i", &SA5_access, 120},
 118         {0x3212103C, "Smart Array E200", &SA5_access, 120},
 119         {0x3213103C, "Smart Array E200i", &SA5_access, 120},
 120         {0x3214103C, "Smart Array E200i", &SA5_access, 120},
 121         {0x3215103C, "Smart Array E200i", &SA5_access, 120},
 122         {0x3237103C, "Smart Array E500", &SA5_access, 512},
 123         {0x323D103C, "Smart Array P700m", &SA5_access, 512},
 124         {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120},
 125 };
 126
 127 /* How long to wait (in milliseconds) for board to go into simple mode */
 128 #define MAX_CONFIG_WAIT 30000
 129 #define MAX_IOCTL_CONFIG_WAIT 1000
 130
 131 /*define how many times we will try a command because of bus resets */
 132 #define MAX_CMD_RETRIES 3
 133
 134 #define READ_AHEAD       1024
 135 #define MAX_CTLR        32
 136
 137 /* Originally cciss driver only supports 8 major numbers */
 138 #define MAX_CTLR_ORIG   8
 139
 140 static ctlr_info_t *hba[MAX_CTLR];
 141
 142 static void do_cciss_request(struct request_queue *q);
 143 static irqreturn_t do_cciss_intr(int irq, void *dev_id);
 144 static int cciss_open(struct inode *inode, struct file *filep);
 145 static int cciss_release(struct inode *inode, struct file *filep);
 146 static int cciss_ioctl(struct inode *inode, struct file *filep,
 147                        unsigned int cmd, unsigned long arg);
 148 static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
 149
 150 static int cciss_revalidate(struct gendisk *disk);
 151 static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk);
 152 static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
 153                            int clear_all);
 154
 155 static void cciss_read_capacity(int ctlr, int logvol, int withirq,
 156                         sector_t *total_size, unsigned int *block_size);
 157 static void cciss_read_capacity_16(int ctlr, int logvol, int withirq,
 158                         sector_t *total_size, unsigned int *block_size);
 159 static void cciss_geometry_inquiry(int ctlr, int logvol,
 160                         int withirq, sector_t total_size,
 161                         unsigned int block_size, InquiryData_struct *inq_buff,
 162                                    drive_info_struct *drv);
 163 static void cciss_getgeometry(int cntl_num);
 164 static void __devinit cciss_interrupt_mode(ctlr_info_t *, struct pci_dev *,
 165                                            __u32);
 166 static void start_io(ctlr_info_t *h);
 167 static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size,
 168                    unsigned int use_unit_num, unsigned int log_unit,
 169                    __u8 page_code, unsigned char *scsi3addr, int cmd_type);
 170 static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
 171                            unsigned int use_unit_num, unsigned int log_unit,
 172                            __u8 page_code, int cmd_type);
 173
 174 static void fail_all_cmds(unsigned long ctlr);
 175
 176 #ifdef CONFIG_PROC_FS
 177 static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
 178                                int length, int *eof, void *data);
 179 static void cciss_procinit(int i);
 180 #else
 181 static void cciss_procinit(int i)
 182 {
 183 }
 184 #endif                          /* CONFIG_PROC_FS */
 185
 186 #ifdef CONFIG_COMPAT
 187 static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg);
 188 #endif
 189
 190 static struct block_device_operations cciss_fops = {
 191         .owner = THIS_MODULE,
 192         .open = cciss_open,
 193         .release = cciss_release,
 194         .ioctl = cciss_ioctl,
 195         .getgeo = cciss_getgeo,
 196 #ifdef CONFIG_COMPAT
 197         .compat_ioctl = cciss_compat_ioctl,
 198 #endif
 199         .revalidate_disk = cciss_revalidate,
 200 };
 201
 202 /*
 203  * Enqueuing and dequeuing functions for cmdlists.
 204  */
 205 static inline void addQ(CommandList_struct **Qptr, CommandList_struct *c)
 206 {
 207         if (*Qptr == NULL) {
 208                 *Qptr = c;
 209                 c->next = c->prev = c;
 210         } else {
 211                 c->prev = (*Qptr)->prev;
 212                 c->next = (*Qptr);
 213                 (*Qptr)->prev->next = c;
 214                 (*Qptr)->prev = c;
 215         }
 216 }
 217
 218 static inline CommandList_struct *removeQ(CommandList_struct **Qptr,
 219                                           CommandList_struct *c)
 220 {
 221         if (c && c->next != c) {
 222                 if (*Qptr == c)
 223                         *Qptr = c->next;
 224                 c->prev->next = c->next;
 225                 c->next->prev = c->prev;
 226         } else {
 227                 *Qptr = NULL;
 228         }
 229         return c;
 230 }
 231
 232 #include "cciss_scsi.c"         /* For SCSI tape support */
 233
 234 #define RAID_UNKNOWN 6
 235
 236 #ifdef CONFIG_PROC_FS
 237
 238 /*
 239  * Report information about this controller.
 240  */
 241 #define ENG_GIG 1000000000
 242 #define ENG_GIG_FACTOR (ENG_GIG/512)
 243 static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
 244         "UNKNOWN"
 245 };
 246
 247 static struct proc_dir_entry *proc_cciss;
 248
 249 static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
 250                                int length, int *eof, void *data)
 251 {
 252         off_t pos = 0;
 253         off_t len = 0;
 254         int size, i, ctlr;
 255         ctlr_info_t *h = (ctlr_info_t *) data;
 256         drive_info_struct *drv;
 257         unsigned long flags;
 258         sector_t vol_sz, vol_sz_frac;
 259
 260         ctlr = h->ctlr;
 261
 262         /* prevent displaying bogus info during configuration
 263          * or deconfiguration of a logical volume
 264          */
 265         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
 266         if (h->busy_configuring) {
 267                 spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
 268                 return -EBUSY;
 269         }
 270         h->busy_configuring = 1;
 271         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
 272
 273         size = sprintf(buffer, "%s: HP %s Controller\n"
 274                        "Board ID: 0x%08lx\n"
 275                        "Firmware Version: %c%c%c%c\n"
 276                        "IRQ: %d\n"
 277                        "Logical drives: %d\n"
 278                        "Max sectors: %d\n"
 279                        "Current Q depth: %d\n"
 280                        "Current # commands on controller: %d\n"
 281                        "Max Q depth since init: %d\n"
 282                        "Max # commands on controller since init: %d\n"
 283                        "Max SG entries since init: %d\n\n",
 284                        h->devname,
 285                        h->product_name,
 286                        (unsigned long)h->board_id,
 287                        h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
 288                        h->firm_ver[3], (unsigned int)h->intr[SIMPLE_MODE_INT],
 289                        h->num_luns,
 290                        h->cciss_max_sectors,
 291                        h->Qdepth, h->commands_outstanding,
 292                        h->maxQsinceinit, h->max_outstanding, h->maxSG);
 293
 294         pos += size;
 295         len += size;
 296         cciss_proc_tape_report(ctlr, buffer, &pos, &len);
 297         for (i = 0; i <= h->highest_lun; i++) {
 298
 299                 drv = &h->drv[i];
 300                 if (drv->heads == 0)
 301                         continue;
 302
 303                 vol_sz = drv->nr_blocks;
 304                 vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
 305                 vol_sz_frac *= 100;
 306                 sector_div(vol_sz_frac, ENG_GIG_FACTOR);
 307
 308                 if (drv->raid_level > 5)
 309                         drv->raid_level = RAID_UNKNOWN;
 310                 size = sprintf(buffer + len, "cciss/c%dd%d:"
 311                                "\t%4u.%02uGB\tRAID %s\n",
 312                                ctlr, i, (int)vol_sz, (int)vol_sz_frac,
 313                                raid_label[drv->raid_level]);
 314                 pos += size;
 315                 len += size;
 316         }
 317
 318         *eof = 1;
 319         *start = buffer + offset;
 320         len -= offset;
 321         if (len > length)
 322                 len = length;
 323         h->busy_configuring = 0;
 324         return len;
 325 }
 326
 327 static int
 328 cciss_proc_write(struct file *file, const char __user *buffer,
 329                  unsigned long count, void *data)
 330 {
 331         unsigned char cmd[80];
 332         int len;
 333 #ifdef CONFIG_CISS_SCSI_TAPE
 334         ctlr_info_t *h = (ctlr_info_t *) data;
 335         int rc;
 336 #endif
 337
 338         if (count > sizeof(cmd) - 1)
 339                 return -EINVAL;
 340         if (copy_from_user(cmd, buffer, count))
 341                 return -EFAULT;
 342         cmd[count] = '\0';
 343         len = strlen(cmd);      // above 3 lines ensure safety
 344         if (len && cmd[len - 1] == '\n')
 345                 cmd[--len] = '\0';
 346 #       ifdef CONFIG_CISS_SCSI_TAPE
 347         if (strcmp("engage scsi", cmd) == 0) {
 348                 rc = cciss_engage_scsi(h->ctlr);
 349                 if (rc != 0)
 350                         return -rc;
 351                 return count;
 352         }
 353         /* might be nice to have "disengage" too, but it's not
 354            safely possible. (only 1 module use count, lock issues.) */
 355 #       endif
 356         return -EINVAL;
 357 }
 358
 359 /*
 360  * Get us a file in /proc/cciss that says something about each controller.
 361  * Create /proc/cciss if it doesn't exist yet.
 362  */
 363 static void __devinit cciss_procinit(int i)
 364 {
 365         struct proc_dir_entry *pde;
 366
 367         if (proc_cciss == NULL) {
 368                 proc_cciss = proc_mkdir("cciss", proc_root_driver);
 369                 if (!proc_cciss)
 370                         return;
 371         }
 372
 373         pde = create_proc_read_entry(hba[i]->devname,
 374                                      S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH,
 375                                      proc_cciss, cciss_proc_get_info, hba[i]);
 376         pde->write_proc = cciss_proc_write;
 377 }
 378 #endif                          /* CONFIG_PROC_FS */
 379
 380 /*
 381  * For operations that cannot sleep, a command block is allocated at init,
 382  * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
 383  * which ones are free or in use.  For operations that can wait for kmalloc
 384  * to possible sleep, this routine can be called with get_from_pool set to 0.
 385  * cmd_free() MUST be called with a got_from_pool set to 0 if cmd_alloc was.
 386  */
 387 static CommandList_struct *cmd_alloc(ctlr_info_t *h, int get_from_pool)
 388 {
 389         CommandList_struct *c;
 390         int i;
 391         u64bit temp64;
 392         dma_addr_t cmd_dma_handle, err_dma_handle;
 393
 394         if (!get_from_pool) {
 395                 c = (CommandList_struct *) pci_alloc_consistent(h->pdev,
 396                         sizeof(CommandList_struct), &cmd_dma_handle);
 397                 if (c == NULL)
 398                         return NULL;
 399                 memset(c, 0, sizeof(CommandList_struct));
 400
 401                 c->cmdindex = -1;
 402
 403                 c->err_info = (ErrorInfo_struct *)
 404                     pci_alloc_consistent(h->pdev, sizeof(ErrorInfo_struct),
 405                             &err_dma_handle);
 406
 407                 if (c->err_info == NULL) {
 408                         pci_free_consistent(h->pdev,
 409                                 sizeof(CommandList_struct), c, cmd_dma_handle);
 410                         return NULL;
 411                 }
 412                 memset(c->err_info, 0, sizeof(ErrorInfo_struct));
 413         } else {                /* get it out of the controllers pool */
 414
 415                 do {
 416                         i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds);
 417                         if (i == h->nr_cmds)
 418                                 return NULL;
 419                 } while (test_and_set_bit
 420                          (i & (BITS_PER_LONG - 1),
 421                           h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0);
 422 #ifdef CCISS_DEBUG
 423                 printk(KERN_DEBUG "cciss: using command buffer %d\n", i);
 424 #endif
 425                 c = h->cmd_pool + i;
 426                 memset(c, 0, sizeof(CommandList_struct));
 427                 cmd_dma_handle = h->cmd_pool_dhandle
 428                     + i * sizeof(CommandList_struct);
 429                 c->err_info = h->errinfo_pool + i;
 430                 memset(c->err_info, 0, sizeof(ErrorInfo_struct));
 431                 err_dma_handle = h->errinfo_pool_dhandle
 432                     + i * sizeof(ErrorInfo_struct);
 433                 h->nr_allocs++;
 434
 435                 c->cmdindex = i;
 436         }
 437
 438         c->busaddr = (__u32) cmd_dma_handle;
 439         temp64.val = (__u64) err_dma_handle;
 440         c->ErrDesc.Addr.lower = temp64.val32.lower;
 441         c->ErrDesc.Addr.upper = temp64.val32.upper;
 442         c->ErrDesc.Len = sizeof(ErrorInfo_struct);
 443
 444         c->ctlr = h->ctlr;
 445         return c;
 446 }
 447
 448 /*
 449  * Frees a command block that was previously allocated with cmd_alloc().
 450  */
 451 static void cmd_free(ctlr_info_t *h, CommandList_struct *c, int got_from_pool)
 452 {
 453         int i;
 454         u64bit temp64;
 455
 456         if (!got_from_pool) {
 457                 temp64.val32.lower = c->ErrDesc.Addr.lower;
 458                 temp64.val32.upper = c->ErrDesc.Addr.upper;
 459                 pci_free_consistent(h->pdev, sizeof(ErrorInfo_struct),
 460                                     c->err_info, (dma_addr_t) temp64.val);
 461                 pci_free_consistent(h->pdev, sizeof(CommandList_struct),
 462                                     c, (dma_addr_t) c->busaddr);
 463         } else {
 464                 i = c - h->cmd_pool;
 465                 clear_bit(i & (BITS_PER_LONG - 1),
 466                           h->cmd_pool_bits + (i / BITS_PER_LONG));
 467                 h->nr_frees++;
 468         }
 469 }
 470
 471 static inline ctlr_info_t *get_host(struct gendisk *disk)
 472 {
 473         return disk->queue->queuedata;
 474 }
 475
 476 static inline drive_info_struct *get_drv(struct gendisk *disk)
 477 {
 478         return disk->private_data;
 479 }
 480
 481 /*
 482  * Open.  Make sure the device is really there.
 483  */
 484 static int cciss_open(struct inode *inode, struct file *filep)
 485 {
 486         ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
 487         drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk);
 488
 489 #ifdef CCISS_DEBUG
 490         printk(KERN_DEBUG "cciss_open %s\n", inode->i_bdev->bd_disk->disk_name);
 491 #endif                          /* CCISS_DEBUG */
 492
 493         if (host->busy_initializing || drv->busy_configuring)
 494                 return -EBUSY;
 495         /*
 496          * Root is allowed to open raw volume zero even if it's not configured
 497          * so array config can still work. Root is also allowed to open any
 498          * volume that has a LUN ID, so it can issue IOCTL to reread the
 499          * disk information.  I don't think I really like this
 500          * but I'm already using way to many device nodes to claim another one
 501          * for "raw controller".
 502          */
 503         if (drv->heads == 0) {
 504                 if (iminor(inode) != 0) {       /* not node 0? */
 505                         /* if not node 0 make sure it is a partition = 0 */
 506                         if (iminor(inode) & 0x0f) {
 507                                 return -ENXIO;
 508                                 /* if it is, make sure we have a LUN ID */
 509                         } else if (drv->LunID == 0) {
 510                                 return -ENXIO;
 511                         }
 512                 }
 513                 if (!capable(CAP_SYS_ADMIN))
 514                         return -EPERM;
 515         }
 516         drv->usage_count++;
 517         host->usage_count++;
 518         return 0;
 519 }
 520
 521 /*
 522  * Close.  Sync first.
 523  */
 524 static int cciss_release(struct inode *inode, struct file *filep)
 525 {
 526         ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
 527         drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk);
 528
 529 #ifdef CCISS_DEBUG
 530         printk(KERN_DEBUG "cciss_release %s\n",
 531                inode->i_bdev->bd_disk->disk_name);
 532 #endif                          /* CCISS_DEBUG */
 533
 534         drv->usage_count--;
 535         host->usage_count--;
 536         return 0;
 537 }
 538
 539 #ifdef CONFIG_COMPAT
 540
 541 static int do_ioctl(struct file *f, unsigned cmd, unsigned long arg)
 542 {
 543         int ret;
 544         lock_kernel();
 545         ret = cciss_ioctl(f->f_path.dentry->d_inode, f, cmd, arg);
 546         unlock_kernel();
 547         return ret;
 548 }
 549
 550 static int cciss_ioctl32_passthru(struct file *f, unsigned cmd,
 551                                   unsigned long arg);
 552 static int cciss_ioctl32_big_passthru(struct file *f, unsigned cmd,
 553                                       unsigned long arg);
 554
 555 static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg)
 556 {
 557         switch (cmd) {
 558         case CCISS_GETPCIINFO:
 559         case CCISS_GETINTINFO:
 560         case CCISS_SETINTINFO:
 561         case CCISS_GETNODENAME:
 562         case CCISS_SETNODENAME:
 563         case CCISS_GETHEARTBEAT:
 564         case CCISS_GETBUSTYPES:
 565         case CCISS_GETFIRMVER:
 566         case CCISS_GETDRIVVER:
 567         case CCISS_REVALIDVOLS:
 568         case CCISS_DEREGDISK:
 569         case CCISS_REGNEWDISK:
 570         case CCISS_REGNEWD:
 571         case CCISS_RESCANDISK:
 572         case CCISS_GETLUNINFO:
 573                 return do_ioctl(f, cmd, arg);
 574
 575         case CCISS_PASSTHRU32:
 576                 return cciss_ioctl32_passthru(f, cmd, arg);
 577         case CCISS_BIG_PASSTHRU32:
 578                 return cciss_ioctl32_big_passthru(f, cmd, arg);
 579
 580         default:
 581                 return -ENOIOCTLCMD;
 582         }
 583 }
 584
 585 static int cciss_ioctl32_passthru(struct file *f, unsigned cmd,
 586                                   unsigned long arg)
 587 {
 588         IOCTL32_Command_struct __user *arg32 =
 589             (IOCTL32_Command_struct __user *) arg;
 590         IOCTL_Command_struct arg64;
 591         IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64));
 592         int err;
 593         u32 cp;
 594
 595         err = 0;
 596         err |=
 597             copy_from_user(&arg64.LUN_info, &arg32->LUN_info,
 598                            sizeof(arg64.LUN_info));
 599         err |=
 600             copy_from_user(&arg64.Request, &arg32->Request,
 601                            sizeof(arg64.Request));
 602         err |=
 603             copy_from_user(&arg64.error_info, &arg32->error_info,
 604                            sizeof(arg64.error_info));
 605         err |= get_user(arg64.buf_size, &arg32->buf_size);
 606         err |= get_user(cp, &arg32->buf);
 607         arg64.buf = compat_ptr(cp);
 608         err |= copy_to_user(p, &arg64, sizeof(arg64));
 609
 610         if (err)
 611                 return -EFAULT;
 612
 613         err = do_ioctl(f, CCISS_PASSTHRU, (unsigned long)p);
 614         if (err)
 615                 return err;
 616         err |=
 617             copy_in_user(&arg32->error_info, &p->error_info,
 618                          sizeof(arg32->error_info));
 619         if (err)
 620                 return -EFAULT;
 621         return err;
 622 }
 623
 624 static int cciss_ioctl32_big_passthru(struct file *file, unsigned cmd,
 625                                       unsigned long arg)
 626 {
 627         BIG_IOCTL32_Command_struct __user *arg32 =
 628             (BIG_IOCTL32_Command_struct __user *) arg;
 629         BIG_IOCTL_Command_struct arg64;
 630         BIG_IOCTL_Command_struct __user *p =
 631             compat_alloc_user_space(sizeof(arg64));
 632         int err;
 633         u32 cp;
 634
 635         err = 0;
 636         err |=
 637             copy_from_user(&arg64.LUN_info, &arg32->LUN_info,
 638                            sizeof(arg64.LUN_info));
 639         err |=
 640             copy_from_user(&arg64.Request, &arg32->Request,
 641                            sizeof(arg64.Request));
 642         err |=
 643             copy_from_user(&arg64.error_info, &arg32->error_info,
 644                            sizeof(arg64.error_info));
 645         err |= get_user(arg64.buf_size, &arg32->buf_size);
 646         err |= get_user(arg64.malloc_size, &arg32->malloc_size);
 647         err |= get_user(cp, &arg32->buf);
 648         arg64.buf = compat_ptr(cp);
 649         err |= copy_to_user(p, &arg64, sizeof(arg64));
 650
 651         if (err)
 652                 return -EFAULT;
 653
 654         err = do_ioctl(file, CCISS_BIG_PASSTHRU, (unsigned long)p);
 655         if (err)
 656                 return err;
 657         err |=
 658             copy_in_user(&arg32->error_info, &p->error_info,
 659                          sizeof(arg32->error_info));
 660         if (err)
 661                 return -EFAULT;
 662         return err;
 663 }
 664 #endif
 665
 666 static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo)
 667 {
 668         drive_info_struct *drv = get_drv(bdev->bd_disk);
 669
 670         if (!drv->cylinders)
 671                 return -ENXIO;
 672
 673         geo->heads = drv->heads;
 674         geo->sectors = drv->sectors;
 675         geo->cylinders = drv->cylinders;
 676         return 0;
 677 }
 678
 679 /*
 680  * ioctl
 681  */
 682 static int cciss_ioctl(struct inode *inode, struct file *filep,
 683                        unsigned int cmd, unsigned long arg)
 684 {
 685         struct block_device *bdev = inode->i_bdev;
 686         struct gendisk *disk = bdev->bd_disk;
 687         ctlr_info_t *host = get_host(disk);
 688         drive_info_struct *drv = get_drv(disk);
 689         int ctlr = host->ctlr;
 690         void __user *argp = (void __user *)arg;
 691
 692 #ifdef CCISS_DEBUG
 693         printk(KERN_DEBUG "cciss_ioctl: Called with cmd=%x %lx\n", cmd, arg);
 694 #endif                          /* CCISS_DEBUG */
 695
 696         switch (cmd) {
 697         case CCISS_GETPCIINFO:
 698                 {
 699                         cciss_pci_info_struct pciinfo;
 700
 701                         if (!arg)
 702                                 return -EINVAL;
 703                         pciinfo.domain = pci_domain_nr(host->pdev->bus);
 704                         pciinfo.bus = host->pdev->bus->number;
 705                         pciinfo.dev_fn = host->pdev->devfn;
 706                         pciinfo.board_id = host->board_id;
 707                         if (copy_to_user
 708                             (argp, &pciinfo, sizeof(cciss_pci_info_struct)))
 709                                 return -EFAULT;
 710                         return 0;
 711                 }
 712         case CCISS_GETINTINFO:
 713                 {
 714                         cciss_coalint_struct intinfo;
 715                         if (!arg)
 716                                 return -EINVAL;
 717                         intinfo.delay =
 718                             readl(&host->cfgtable->HostWrite.CoalIntDelay);
 719                         intinfo.count =
 720                             readl(&host->cfgtable->HostWrite.CoalIntCount);
 721                         if (copy_to_user
 722                             (argp, &intinfo, sizeof(cciss_coalint_struct)))
 723                                 return -EFAULT;
 724                         return 0;
 725                 }
 726         case CCISS_SETINTINFO:
 727                 {
 728                         cciss_coalint_struct intinfo;
 729                         unsigned long flags;
 730                         int i;
 731
 732                         if (!arg)
 733                                 return -EINVAL;
 734                         if (!capable(CAP_SYS_ADMIN))
 735                                 return -EPERM;
 736                         if (copy_from_user
 737                             (&intinfo, argp, sizeof(cciss_coalint_struct)))
 738                                 return -EFAULT;
 739                         if ((intinfo.delay == 0) && (intinfo.count == 0))
 740                         {
 741 //                      printk("cciss_ioctl: delay and count cannot be 0\n");
 742                                 return -EINVAL;
 743                         }
 744                         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
 745                         /* Update the field, and then ring the doorbell */
 746                         writel(intinfo.delay,
 747                                &(host->cfgtable->HostWrite.CoalIntDelay));
 748                         writel(intinfo.count,
 749                                &(host->cfgtable->HostWrite.CoalIntCount));
 750                         writel(CFGTBL_ChangeReq, host->vaddr + SA5_DOORBELL);
 751
 752                         for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) {
 753                                 if (!(readl(host->vaddr + SA5_DOORBELL)
 754                                       & CFGTBL_ChangeReq))
 755                                         break;
 756                                 /* delay and try again */
 757                                 udelay(1000);
 758                         }
 759                         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
 760                         if (i >= MAX_IOCTL_CONFIG_WAIT)
 761                                 return -EAGAIN;
 762                         return 0;
 763                 }
 764         case CCISS_GETNODENAME:
 765                 {
 766                         NodeName_type NodeName;
 767                         int i;
 768
 769                         if (!arg)
 770                                 return -EINVAL;
 771                         for (i = 0; i < 16; i++)
 772                                 NodeName[i] =
 773                                     readb(&host->cfgtable->ServerName[i]);
 774                         if (copy_to_user(argp, NodeName, sizeof(NodeName_type)))
 775                                 return -EFAULT;
 776                         return 0;
 777                 }
 778         case CCISS_SETNODENAME:
 779                 {
 780                         NodeName_type NodeName;
 781                         unsigned long flags;
 782                         int i;
 783
 784                         if (!arg)
 785                                 return -EINVAL;
 786                         if (!capable(CAP_SYS_ADMIN))
 787                                 return -EPERM;
 788
 789                         if (copy_from_user
 790                             (NodeName, argp, sizeof(NodeName_type)))
 791                                 return -EFAULT;
 792
 793                         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
 794
 795                         /* Update the field, and then ring the doorbell */
 796                         for (i = 0; i < 16; i++)
 797                                 writeb(NodeName[i],
 798                                        &host->cfgtable->ServerName[i]);
 799
 800                         writel(CFGTBL_ChangeReq, host->vaddr + SA5_DOORBELL);
 801
 802                         for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) {
 803                                 if (!(readl(host->vaddr + SA5_DOORBELL)
 804                                       & CFGTBL_ChangeReq))
 805                                         break;
 806                                 /* delay and try again */
 807                                 udelay(1000);
 808                         }
 809                         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
 810                         if (i >= MAX_IOCTL_CONFIG_WAIT)
 811                                 return -EAGAIN;
 812                         return 0;
 813                 }
 814
 815         case CCISS_GETHEARTBEAT:
 816                 {
 817                         Heartbeat_type heartbeat;
 818
 819                         if (!arg)
 820                                 return -EINVAL;
 821                         heartbeat = readl(&host->cfgtable->HeartBeat);
 822                         if (copy_to_user
 823                             (argp, &heartbeat, sizeof(Heartbeat_type)))
 824                                 return -EFAULT;
 825                         return 0;
 826                 }
 827         case CCISS_GETBUSTYPES:
 828                 {
 829                         BusTypes_type BusTypes;
 830
 831                         if (!arg)
 832                                 return -EINVAL;
 833                         BusTypes = readl(&host->cfgtable->BusTypes);
 834                         if (copy_to_user
 835                             (argp, &BusTypes, sizeof(BusTypes_type)))
 836                                 return -EFAULT;
 837                         return 0;
 838                 }
 839         case CCISS_GETFIRMVER:
 840                 {
 841                         FirmwareVer_type firmware;
 842
 843                         if (!arg)
 844                                 return -EINVAL;
 845                         memcpy(firmware, host->firm_ver, 4);
 846
 847                         if (copy_to_user
 848                             (argp, firmware, sizeof(FirmwareVer_type)))
 849                                 return -EFAULT;
 850                         return 0;
 851                 }
 852         case CCISS_GETDRIVVER:
 853                 {
 854                         DriverVer_type DriverVer = DRIVER_VERSION;
 855
 856                         if (!arg)
 857                                 return -EINVAL;
 858
 859                         if (copy_to_user
 860                             (argp, &DriverVer, sizeof(DriverVer_type)))
 861                                 return -EFAULT;
 862                         return 0;
 863                 }
 864
 865         case CCISS_REVALIDVOLS:
 866                 return rebuild_lun_table(host, NULL);
 867
 868         case CCISS_GETLUNINFO:{
 869                         LogvolInfo_struct luninfo;
 870
 871                         luninfo.LunID = drv->LunID;
 872                         luninfo.num_opens = drv->usage_count;
 873                         luninfo.num_parts = 0;
 874                         if (copy_to_user(argp, &luninfo,
 875                                          sizeof(LogvolInfo_struct)))
 876                                 return -EFAULT;
 877                         return 0;
 878                 }
 879         case CCISS_DEREGDISK:
 880                 return rebuild_lun_table(host, disk);
 881
 882         case CCISS_REGNEWD:
 883                 return rebuild_lun_table(host, NULL);
 884
 885         case CCISS_PASSTHRU:
 886                 {
 887                         IOCTL_Command_struct iocommand;
 888                         CommandList_struct *c;
 889                         char *buff = NULL;
 890                         u64bit temp64;
 891                         unsigned long flags;
 892                         DECLARE_COMPLETION_ONSTACK(wait);
 893
 894                         if (!arg)
 895                                 return -EINVAL;
 896
 897                         if (!capable(CAP_SYS_RAWIO))
 898                                 return -EPERM;
 899
 900                         if (copy_from_user
 901                             (&iocommand, argp, sizeof(IOCTL_Command_struct)))
 902                                 return -EFAULT;
 903                         if ((iocommand.buf_size < 1) &&
 904                             (iocommand.Request.Type.Direction != XFER_NONE)) {
 905                                 return -EINVAL;
 906                         }
 907 #if 0                           /* 'buf_size' member is 16-bits, and always smaller than kmalloc limit */
 908                         /* Check kmalloc limits */
 909                         if (iocommand.buf_size > 128000)
 910                                 return -EINVAL;
 911 #endif
 912                         if (iocommand.buf_size > 0) {
 913                                 buff = kmalloc(iocommand.buf_size, GFP_KERNEL);
 914                                 if (buff == NULL)
 915                                         return -EFAULT;
 916                         }
 917                         if (iocommand.Request.Type.Direction == XFER_WRITE) {
 918                                 /* Copy the data into the buffer we created */
 919                                 if (copy_from_user
 920                                     (buff, iocommand.buf, iocommand.buf_size)) {
 921                                         kfree(buff);
 922                                         return -EFAULT;
 923                                 }
 924                         } else {
 925                                 memset(buff, 0, iocommand.buf_size);
 926                         }
 927                         if ((c = cmd_alloc(host, 0)) == NULL) {
 928                                 kfree(buff);
 929                                 return -ENOMEM;
 930                         }
 931                         // Fill in the command type
 932                         c->cmd_type = CMD_IOCTL_PEND;
 933                         // Fill in Command Header
 934                         c->Header.ReplyQueue = 0;       // unused in simple mode
 935                         if (iocommand.buf_size > 0)     // buffer to fill
 936                         {
 937                                 c->Header.SGList = 1;
 938                                 c->Header.SGTotal = 1;
 939                         } else  // no buffers to fill
 940                         {
 941                                 c->Header.SGList = 0;
 942                                 c->Header.SGTotal = 0;
 943                         }
 944                         c->Header.LUN = iocommand.LUN_info;
 945                         c->Header.Tag.lower = c->busaddr;       // use the kernel address the cmd block for tag
 946
 947                         // Fill in Request block
 948                         c->Request = iocommand.Request;
 949
 950                         // Fill in the scatter gather information
 951                         if (iocommand.buf_size > 0) {
 952                                 temp64.val = pci_map_single(host->pdev, buff,
 953                                         iocommand.buf_size,
 954                                         PCI_DMA_BIDIRECTIONAL);
 955                                 c->SG[0].Addr.lower = temp64.val32.lower;
 956                                 c->SG[0].Addr.upper = temp64.val32.upper;
 957                                 c->SG[0].Len = iocommand.buf_size;
 958                                 c->SG[0].Ext = 0;       // we are not chaining
 959                         }
 960                         c->waiting = &wait;
 961
 962                         /* Put the request on the tail of the request queue */
 963                         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
 964                         addQ(&host->reqQ, c);
 965                         host->Qdepth++;
 966                         start_io(host);
 967                         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
 968
 969                         wait_for_completion(&wait);
 970
 971                         /* unlock the buffers from DMA */
 972                         temp64.val32.lower = c->SG[0].Addr.lower;
 973                         temp64.val32.upper = c->SG[0].Addr.upper;
 974                         pci_unmap_single(host->pdev, (dma_addr_t) temp64.val,
 975                                          iocommand.buf_size,
 976                                          PCI_DMA_BIDIRECTIONAL);
 977
 978                         /* Copy the error information out */
 979                         iocommand.error_info = *(c->err_info);
 980                         if (copy_to_user
 981                             (argp, &iocommand, sizeof(IOCTL_Command_struct))) {
 982                                 kfree(buff);
 983                                 cmd_free(host, c, 0);
 984                                 return -EFAULT;
 985                         }
 986
 987                         if (iocommand.Request.Type.Direction == XFER_READ) {
 988                                 /* Copy the data out of the buffer we created */
 989                                 if (copy_to_user
 990                                     (iocommand.buf, buff, iocommand.buf_size)) {
 991                                         kfree(buff);
 992                                         cmd_free(host, c, 0);
 993                                         return -EFAULT;
 994                                 }
 995                         }
 996                         kfree(buff);
 997                         cmd_free(host, c, 0);
 998                         return 0;
 999                 }
1000         case CCISS_BIG_PASSTHRU:{
1001                         BIG_IOCTL_Command_struct *ioc;
1002                         CommandList_struct *c;
1003                         unsigned char **buff = NULL;
1004                         int *buff_size = NULL;
1005                         u64bit temp64;
1006                         unsigned long flags;
1007                         BYTE sg_used = 0;
1008                         int status = 0;
1009                         int i;
1010                         DECLARE_COMPLETION_ONSTACK(wait);
1011                         __u32 left;
1012                         __u32 sz;
1013                         BYTE __user *data_ptr;
1014
1015                         if (!arg)
1016                                 return -EINVAL;
1017                         if (!capable(CAP_SYS_RAWIO))
1018                                 return -EPERM;
1019                         ioc = (BIG_IOCTL_Command_struct *)
1020                             kmalloc(sizeof(*ioc), GFP_KERNEL);
1021                         if (!ioc) {
1022                                 status = -ENOMEM;
1023                                 goto cleanup1;
1024                         }
1025                         if (copy_from_user(ioc, argp, sizeof(*ioc))) {
1026                                 status = -EFAULT;
1027                                 goto cleanup1;
1028                         }
1029                         if ((ioc->buf_size < 1) &&
1030                             (ioc->Request.Type.Direction != XFER_NONE)) {
1031                                 status = -EINVAL;
1032                                 goto cleanup1;
1033                         }
1034                         /* Check kmalloc limits  using all SGs */
1035                         if (ioc->malloc_size > MAX_KMALLOC_SIZE) {
1036                                 status = -EINVAL;
1037                                 goto cleanup1;
1038                         }
1039                         if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) {
1040                                 status = -EINVAL;
1041                                 goto cleanup1;
1042                         }
1043                         buff =
1044                             kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL);
1045                         if (!buff) {
1046                                 status = -ENOMEM;
1047                                 goto cleanup1;
1048                         }
1049                         buff_size = kmalloc(MAXSGENTRIES * sizeof(int),
1050                                                    GFP_KERNEL);
1051                         if (!buff_size) {
1052                                 status = -ENOMEM;
1053                                 goto cleanup1;
1054                         }
1055                         left = ioc->buf_size;
1056                         data_ptr = ioc->buf;
1057                         while (left) {
1058                                 sz = (left >
1059                                       ioc->malloc_size) ? ioc->
1060                                     malloc_size : left;
1061                                 buff_size[sg_used] = sz;
1062                                 buff[sg_used] = kmalloc(sz, GFP_KERNEL);
1063                                 if (buff[sg_used] == NULL) {
1064                                         status = -ENOMEM;
1065                                         goto cleanup1;
1066                                 }
1067                                 if (ioc->Request.Type.Direction == XFER_WRITE) {
1068                                         if (copy_from_user
1069                                             (buff[sg_used], data_ptr, sz)) {
1070                                                 status = -ENOMEM;
1071                                                 goto cleanup1;
1072                                         }
1073                                 } else {
1074                                         memset(buff[sg_used], 0, sz);
1075                                 }
1076                                 left -= sz;
1077                                 data_ptr += sz;
1078                                 sg_used++;
1079                         }
1080                         if ((c = cmd_alloc(host, 0)) == NULL) {
1081                                 status = -ENOMEM;
1082                                 goto cleanup1;
1083                         }
1084                         c->cmd_type = CMD_IOCTL_PEND;
1085                         c->Header.ReplyQueue = 0;
1086
1087                         if (ioc->buf_size > 0) {
1088                                 c->Header.SGList = sg_used;
1089                                 c->Header.SGTotal = sg_used;
1090                         } else {
1091                                 c->Header.SGList = 0;
1092                                 c->Header.SGTotal = 0;
1093                         }
1094                         c->Header.LUN = ioc->LUN_info;
1095                         c->Header.Tag.lower = c->busaddr;
1096
1097                         c->Request = ioc->Request;
1098                         if (ioc->buf_size > 0) {
1099                                 int i;
1100                                 for (i = 0; i < sg_used; i++) {
1101                                         temp64.val =
1102                                             pci_map_single(host->pdev, buff[i],
1103                                                     buff_size[i],
1104                                                     PCI_DMA_BIDIRECTIONAL);
1105                                         c->SG[i].Addr.lower =
1106                                             temp64.val32.lower;
1107                                         c->SG[i].Addr.upper =
1108                                             temp64.val32.upper;
1109                                         c->SG[i].Len = buff_size[i];
1110                                         c->SG[i].Ext = 0;       /* we are not chaining */
1111                                 }
1112                         }
1113                         c->waiting = &wait;
1114                         /* Put the request on the tail of the request queue */
1115                         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
1116                         addQ(&host->reqQ, c);
1117                         host->Qdepth++;
1118                         start_io(host);
1119                         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
1120                         wait_for_completion(&wait);
1121                         /* unlock the buffers from DMA */
1122                         for (i = 0; i < sg_used; i++) {
1123                                 temp64.val32.lower = c->SG[i].Addr.lower;
1124                                 temp64.val32.upper = c->SG[i].Addr.upper;
1125                                 pci_unmap_single(host->pdev,
1126                                         (dma_addr_t) temp64.val, buff_size[i],
1127                                         PCI_DMA_BIDIRECTIONAL);
1128                         }
1129                         /* Copy the error information out */
1130                         ioc->error_info = *(c->err_info);
1131                         if (copy_to_user(argp, ioc, sizeof(*ioc))) {
1132                                 cmd_free(host, c, 0);
1133                                 status = -EFAULT;
1134                                 goto cleanup1;
1135                         }
1136                         if (ioc->Request.Type.Direction == XFER_READ) {
1137                                 /* Copy the data out of the buffer we created */
1138                                 BYTE __user *ptr = ioc->buf;
1139                                 for (i = 0; i < sg_used; i++) {
1140                                         if (copy_to_user
1141                                             (ptr, buff[i], buff_size[i])) {
1142                                                 cmd_free(host, c, 0);
1143                                                 status = -EFAULT;
1144                                                 goto cleanup1;
1145                                         }
1146                                         ptr += buff_size[i];
1147                                 }
1148                         }
1149                         cmd_free(host, c, 0);
1150                         status = 0;
1151                       cleanup1:
1152                         if (buff) {
1153                                 for (i = 0; i < sg_used; i++)
1154                                         kfree(buff[i]);
1155                                 kfree(buff);
1156                         }
1157                         kfree(buff_size);
1158                         kfree(ioc);
1159                         return status;
1160                 }
1161
1162         /* scsi_cmd_ioctl handles these, below, though some are not */
1163         /* very meaningful for cciss.  SG_IO is the main one people want. */
1164
1165         case SG_GET_VERSION_NUM:
1166         case SG_SET_TIMEOUT:
1167         case SG_GET_TIMEOUT:
1168         case SG_GET_RESERVED_SIZE:
1169         case SG_SET_RESERVED_SIZE:
1170         case SG_EMULATED_HOST:
1171         case SG_IO:
1172         case SCSI_IOCTL_SEND_COMMAND:
1173                 return scsi_cmd_ioctl(filep, disk->queue, disk, cmd, argp);
1174
1175         /* scsi_cmd_ioctl would normally handle these, below, but */
1176         /* they aren't a good fit for cciss, as CD-ROMs are */
1177         /* not supported, and we don't have any bus/target/lun */
1178         /* which we present to the kernel. */
1179
1180         case CDROM_SEND_PACKET:
1181         case CDROMCLOSETRAY:
1182         case CDROMEJECT:
1183         case SCSI_IOCTL_GET_IDLUN:
1184         case SCSI_IOCTL_GET_BUS_NUMBER:
1185         default:
1186                 return -ENOTTY;
1187         }
1188 }
1189
1190 static inline void complete_buffers(struct bio *bio, int status)
1191 {
1192         while (bio) {
1193                 struct bio *xbh = bio->bi_next;
1194
1195                 bio->bi_next = NULL;
1196                 bio_endio(bio, status ? 0 : -EIO);
1197                 bio = xbh;
1198         }
1199 }
1200
1201 static void cciss_check_queues(ctlr_info_t *h)
1202 {
1203         int start_queue = h->next_to_run;
1204         int i;
1205
1206         /* check to see if we have maxed out the number of commands that can
1207          * be placed on the queue.  If so then exit.  We do this check here
1208          * in case the interrupt we serviced was from an ioctl and did not
1209          * free any new commands.
1210          */
1211         if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds)
1212                 return;
1213
1214         /* We have room on the queue for more commands.  Now we need to queue
1215          * them up.  We will also keep track of the next queue to run so
1216          * that every queue gets a chance to be started first.
1217          */
1218         for (i = 0; i < h->highest_lun + 1; i++) {
1219                 int curr_queue = (start_queue + i) % (h->highest_lun + 1);
1220                 /* make sure the disk has been added and the drive is real
1221                  * because this can be called from the middle of init_one.
1222                  */
1223                 if (!(h->drv[curr_queue].queue) || !(h->drv[curr_queue].heads))
1224                         continue;
1225                 blk_start_queue(h->gendisk[curr_queue]->queue);
1226
1227                 /* check to see if we have maxed out the number of commands
1228                  * that can be placed on the queue.
1229                  */
1230                 if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds) {
1231                         if (curr_queue == start_queue) {
1232                                 h->next_to_run =
1233                                     (start_queue + 1) % (h->highest_lun + 1);
1234                                 break;
1235                         } else {
1236                                 h->next_to_run = curr_queue;
1237                                 break;
1238                         }
1239                 } else {
1240                         curr_queue = (curr_queue + 1) % (h->highest_lun + 1);
1241                 }
1242         }
1243 }
1244
1245 static void cciss_softirq_done(struct request *rq)
1246 {
1247         CommandList_struct *cmd = rq->completion_data;
1248         ctlr_info_t *h = hba[cmd->ctlr];
1249         unsigned long flags;
1250         u64bit temp64;
1251         int i, ddir;
1252
1253         if (cmd->Request.Type.Direction == XFER_READ)
1254                 ddir = PCI_DMA_FROMDEVICE;
1255         else
1256                 ddir = PCI_DMA_TODEVICE;
1257
1258         /* command did not need to be retried */
1259         /* unmap the DMA mapping for all the scatter gather elements */
1260         for (i = 0; i < cmd->Header.SGList; i++) {
1261                 temp64.val32.lower = cmd->SG[i].Addr.lower;
1262                 temp64.val32.upper = cmd->SG[i].Addr.upper;
1263                 pci_unmap_page(h->pdev, temp64.val, cmd->SG[i].Len, ddir);
1264         }
1265
1266         complete_buffers(rq->bio, (rq->errors == 0));
1267
1268         if (blk_fs_request(rq)) {
1269                 const int rw = rq_data_dir(rq);
1270
1271                 disk_stat_add(rq->rq_disk, sectors[rw], rq->nr_sectors);
1272         }
1273
1274 #ifdef CCISS_DEBUG
1275         printk("Done with %p\n", rq);
1276 #endif                          /* CCISS_DEBUG */
1277
1278         add_disk_randomness(rq->rq_disk);
1279         spin_lock_irqsave(&h->lock, flags);
1280         end_that_request_last(rq, (rq->errors == 0));
1281         cmd_free(h, cmd, 1);
1282         cciss_check_queues(h);
1283         spin_unlock_irqrestore(&h->lock, flags);
1284 }
1285
1286 /* This function will check the usage_count of the drive to be updated/added.
1287  * If the usage_count is zero then the drive information will be updated and
1288  * the disk will be re-registered with the kernel.  If not then it will be
1289  * left alone for the next reboot.  The exception to this is disk 0 which
1290  * will always be left registered with the kernel since it is also the
1291  * controller node.  Any changes to disk 0 will show up on the next
1292  * reboot.
1293  */
1294 static void cciss_update_drive_info(int ctlr, int drv_index)
1295 {
1296         ctlr_info_t *h = hba[ctlr];
1297         struct gendisk *disk;
1298         InquiryData_struct *inq_buff = NULL;
1299         unsigned int block_size;
1300         sector_t total_size;
1301         unsigned long flags = 0;
1302         int ret = 0;
1303
1304         /* if the disk already exists then deregister it before proceeding */
1305         if (h->drv[drv_index].raid_level != -1) {
1306                 spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
1307                 h->drv[drv_index].busy_configuring = 1;
1308                 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
1309                 ret = deregister_disk(h->gendisk[drv_index],
1310                                       &h->drv[drv_index], 0);
1311                 h->drv[drv_index].busy_configuring = 0;
1312         }
1313
1314         /* If the disk is in use return */
1315         if (ret)
1316                 return;
1317
1318         /* Get information about the disk and modify the driver structure */
1319         inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
1320         if (inq_buff == NULL)
1321                 goto mem_msg;
1322
1323         /* testing to see if 16-byte CDBs are already being used */
1324         if (h->cciss_read == CCISS_READ_16) {
1325                 cciss_read_capacity_16(h->ctlr, drv_index, 1,
1326                         &total_size, &block_size);
1327                 goto geo_inq;
1328         }
1329
1330         cciss_read_capacity(ctlr, drv_index, 1,
1331                             &total_size, &block_size);
1332
1333         /* if read_capacity returns all F's this volume is >2TB in size */
1334         /* so we switch to 16-byte CDB's for all read/write ops */
1335         if (total_size == 0xFFFFFFFFULL) {
1336                 cciss_read_capacity_16(ctlr, drv_index, 1,
1337                 &total_size, &block_size);
1338                 h->cciss_read = CCISS_READ_16;
1339                 h->cciss_write = CCISS_WRITE_16;
1340         } else {
1341                 h->cciss_read = CCISS_READ_10;
1342                 h->cciss_write = CCISS_WRITE_10;
1343         }
1344 geo_inq:
1345         cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
1346                                inq_buff, &h->drv[drv_index]);
1347
1348         ++h->num_luns;
1349         disk = h->gendisk[drv_index];
1350         set_capacity(disk, h->drv[drv_index].nr_blocks);
1351
1352         /* if it's the controller it's already added */
1353         if (drv_index) {
1354                 disk->queue = blk_init_queue(do_cciss_request, &h->lock);
1355                 sprintf(disk->disk_name, "cciss/c%dd%d", ctlr, drv_index);
1356                 disk->major = h->major;
1357                 disk->first_minor = drv_index << NWD_SHIFT;
1358                 disk->fops = &cciss_fops;
1359                 disk->private_data = &h->drv[drv_index];
1360
1361                 /* Set up queue information */
1362                 disk->queue->backing_dev_info.ra_pages = READ_AHEAD;
1363                 blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask);
1364
1365                 /* This is a hardware imposed limit. */
1366                 blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES);
1367
1368                 /* This is a limit in the driver and could be eliminated. */
1369                 blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES);
1370
1371                 blk_queue_max_sectors(disk->queue, h->cciss_max_sectors);
1372
1373                 blk_queue_softirq_done(disk->queue, cciss_softirq_done);
1374
1375                 disk->queue->queuedata = hba[ctlr];
1376
1377                 blk_queue_hardsect_size(disk->queue,
1378                                         hba[ctlr]->drv[drv_index].block_size);
1379
1380                 h->drv[drv_index].queue = disk->queue;
1381                 add_disk(disk);
1382         }
1383
1384       freeret:
1385         kfree(inq_buff);
1386         return;
1387       mem_msg:
1388         printk(KERN_ERR "cciss: out of memory\n");
1389         goto freeret;
1390 }
1391
1392 /* This function will find the first index of the controllers drive array
1393  * that has a -1 for the raid_level and will return that index.  This is
1394  * where new drives will be added.  If the index to be returned is greater
1395  * than the highest_lun index for the controller then highest_lun is set
1396  * to this new index.  If there are no available indexes then -1 is returned.
1397  */
1398 static int cciss_find_free_drive_index(int ctlr)
1399 {
1400         int i;
1401
1402         for (i = 0; i < CISS_MAX_LUN; i++) {
1403                 if (hba[ctlr]->drv[i].raid_level == -1) {
1404                         if (i > hba[ctlr]->highest_lun)
1405                                 hba[ctlr]->highest_lun = i;
1406                         return i;
1407                 }
1408         }
1409         return -1;
1410 }
1411
1412 /* This function will add and remove logical drives from the Logical
1413  * drive array of the controller and maintain persistency of ordering
1414  * so that mount points are preserved until the next reboot.  This allows
1415  * for the removal of logical drives in the middle of the drive array
1416  * without a re-ordering of those drives.
1417  * INPUT
1418  * h            = The controller to perform the operations on
1419  * del_disk     = The disk to remove if specified.  If the value given
1420  *                is NULL then no disk is removed.
1421  */
1422 static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
1423 {
1424         int ctlr = h->ctlr;
1425         int num_luns;
1426         ReportLunData_struct *ld_buff = NULL;
1427         drive_info_struct *drv = NULL;
1428         int return_code;
1429         int listlength = 0;
1430         int i;
1431         int drv_found;
1432         int drv_index = 0;
1433         __u32 lunid = 0;
1434         unsigned long flags;
1435
1436         /* Set busy_configuring flag for this operation */
1437         spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
1438         if (h->busy_configuring) {
1439                 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
1440                 return -EBUSY;
1441         }
1442         h->busy_configuring = 1;
1443
1444         /* if del_disk is NULL then we are being called to add a new disk
1445          * and update the logical drive table.  If it is not NULL then
1446          * we will check if the disk is in use or not.
1447          */
1448         if (del_disk != NULL) {
1449                 drv = get_drv(del_disk);
1450                 drv->busy_configuring = 1;
1451                 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
1452                 return_code = deregister_disk(del_disk, drv, 1);
1453                 drv->busy_configuring = 0;
1454                 h->busy_configuring = 0;
1455                 return return_code;
1456         } else {
1457                 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
1458                 if (!capable(CAP_SYS_RAWIO))
1459                         return -EPERM;
1460
1461                 ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
1462                 if (ld_buff == NULL)
1463                         goto mem_msg;
1464
1465                 return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
1466                                               sizeof(ReportLunData_struct), 0,
1467                                               0, 0, TYPE_CMD);
1468
1469                 if (return_code == IO_OK) {
1470                         listlength =
1471                                 be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
1472                 } else {        /* reading number of logical volumes failed */
1473                         printk(KERN_WARNING "cciss: report logical volume"
1474                                " command failed\n");
1475                         listlength = 0;
1476                         goto freeret;
1477                 }
1478
1479                 num_luns = listlength / 8;      /* 8 bytes per entry */
1480                 if (num_luns > CISS_MAX_LUN) {
1481                         num_luns = CISS_MAX_LUN;
1482                         printk(KERN_WARNING "cciss: more luns configured"
1483                                " on controller than can be handled by"
1484                                " this driver.\n");
1485                 }
1486
1487                 /* Compare controller drive array to drivers drive array.
1488                  * Check for updates in the drive information and any new drives
1489                  * on the controller.
1490                  */
1491                 for (i = 0; i < num_luns; i++) {
1492                         int j;
1493
1494                         drv_found = 0;
1495
1496                         lunid = (0xff &
1497                                  (unsigned int)(ld_buff->LUN[i][3])) << 24;
1498                         lunid |= (0xff &
1499                                   (unsigned int)(ld_buff->LUN[i][2])) << 16;
1500                         lunid |= (0xff &
1501                                   (unsigned int)(ld_buff->LUN[i][1])) << 8;
1502                         lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
1503
1504                         /* Find if the LUN is already in the drive array
1505                          * of the controller.  If so then update its info
1506                          * if not is use.  If it does not exist then find
1507                          * the first free index and add it.
1508                          */
1509                         for (j = 0; j <= h->highest_lun; j++) {
1510                                 if (h->drv[j].LunID == lunid) {
1511                                         drv_index = j;
1512                                         drv_found = 1;
1513                                 }
1514                         }
1515
1516                         /* check if the drive was found already in the array */
1517                         if (!drv_found) {
1518                                 drv_index = cciss_find_free_drive_index(ctlr);
1519                                 if (drv_index == -1)
1520                                         goto freeret;
1521
1522                                 /*Check if the gendisk needs to be allocated */
1523                                 if (!h->gendisk[drv_index]){
1524                                         h->gendisk[drv_index] = alloc_disk(1 << NWD_SHIFT);
1525                                         if (!h->gendisk[drv_index]){
1526                                                 printk(KERN_ERR "cciss: could not allocate new disk %d\n", drv_index);
1527                                                 goto mem_msg;
1528                                         }
1529                                 }
1530                         }
1531                         h->drv[drv_index].LunID = lunid;
1532                         cciss_update_drive_info(ctlr, drv_index);
1533                 }               /* end for */
1534         }                       /* end else */
1535
1536       freeret:
1537         kfree(ld_buff);
1538         h->busy_configuring = 0;
1539         /* We return -1 here to tell the ACU that we have registered/updated
1540          * all of the drives that we can and to keep it from calling us
1541          * additional times.
1542          */
1543         return -1;
1544       mem_msg:
1545         printk(KERN_ERR "cciss: out of memory\n");
1546         goto freeret;
1547 }
1548
1549 /* This function will deregister the disk and it's queue from the
1550  * kernel.  It must be called with the controller lock held and the
1551  * drv structures busy_configuring flag set.  It's parameters are:
1552  *
1553  * disk = This is the disk to be deregistered
1554  * drv  = This is the drive_info_struct associated with the disk to be
1555  *        deregistered.  It contains information about the disk used
1556  *        by the driver.
1557  * clear_all = This flag determines whether or not the disk information
1558  *             is going to be completely cleared out and the highest_lun
1559  *             reset.  Sometimes we want to clear out information about
1560  *             the disk in preparation for re-adding it.  In this case
1561  *             the highest_lun should be left unchanged and the LunID
1562  *             should not be cleared.
1563 */
1564 static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
1565                            int clear_all)
1566 {
1567         int i;
1568         ctlr_info_t *h = get_host(disk);
1569
1570         if (!capable(CAP_SYS_RAWIO))
1571                 return -EPERM;
1572
1573         /* make sure logical volume is NOT is use */
1574         if (clear_all || (h->gendisk[0] == disk)) {
1575                 if (drv->usage_count > 1)
1576                         return -EBUSY;
1577         } else if (drv->usage_count > 0)
1578                 return -EBUSY;
1579
1580         /* invalidate the devices and deregister the disk.  If it is disk
1581          * zero do not deregister it but just zero out it's values.  This
1582          * allows us to delete disk zero but keep the controller registered.
1583          */
1584         if (h->gendisk[0] != disk) {
1585                 if (disk) {
1586                         struct request_queue *q = disk->queue;
1587                         if (disk->flags & GENHD_FL_UP)
1588                                 del_gendisk(disk);
1589                         if (q) {
1590                                 blk_cleanup_queue(q);
1591                                 /* Set drv->queue to NULL so that we do not try
1592                                  * to call blk_start_queue on this queue in the
1593                                  * interrupt handler
1594                                  */
1595                                 drv->queue = NULL;
1596                         }
1597                         /* If clear_all is set then we are deleting the logical
1598                          * drive, not just refreshing its info.  For drives
1599                          * other than disk 0 we will call put_disk.  We do not
1600                          * do this for disk 0 as we need it to be able to
1601                          * configure the controller.
1602                         */
1603                         if (clear_all){
1604                                 /* This isn't pretty, but we need to find the
1605                                  * disk in our array and NULL our the pointer.
1606                                  * This is so that we will call alloc_disk if
1607                                  * this index is used again later.
1608                                 */
1609                                 for (i=0; i < CISS_MAX_LUN; i++){
1610                                         if(h->gendisk[i] == disk){
1611                                                 h->gendisk[i] = NULL;
1612                                                 break;
1613                                         }
1614                                 }
1615                                 put_disk(disk);
1616                         }
1617                 }
1618         } else {
1619                 set_capacity(disk, 0);
1620         }
1621
1622         --h->num_luns;
1623         /* zero out the disk size info */
1624         drv->nr_blocks = 0;
1625         drv->block_size = 0;
1626         drv->heads = 0;
1627         drv->sectors = 0;
1628         drv->cylinders = 0;
1629         drv->raid_level = -1;   /* This can be used as a flag variable to
1630                                  * indicate that this element of the drive
1631                                  * array is free.
1632                                  */
1633
1634         if (clear_all) {
1635                 /* check to see if it was the last disk */
1636                 if (drv == h->drv + h->highest_lun) {
1637                         /* if so, find the new hightest lun */
1638                         int i, newhighest = -1;
1639                         for (i = 0; i < h->highest_lun; i++) {
1640                                 /* if the disk has size > 0, it is available */
1641                                 if (h->drv[i].heads)
1642                                         newhighest = i;
1643                         }
1644                         h->highest_lun = newhighest;
1645                 }
1646
1647                 drv->LunID = 0;
1648         }
1649         return 0;
1650 }
1651
1652 static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num,      /* 0: address the controller,
1653                                                                                                                            1: address logical volume log_unit,
1654                                                                                                                            2: periph device address is scsi3addr */
1655                     unsigned int log_unit, __u8 page_code,
1656                     unsigned char *scsi3addr, int cmd_type)
1657 {
1658         ctlr_info_t *h = hba[ctlr];
1659         u64bit buff_dma_handle;
1660         int status = IO_OK;
1661
1662         c->cmd_type = CMD_IOCTL_PEND;
1663         c->Header.ReplyQueue = 0;
1664         if (buff != NULL) {
1665                 c->Header.SGList = 1;
1666                 c->Header.SGTotal = 1;
1667         } else {
1668                 c->Header.SGList = 0;
1669                 c->Header.SGTotal = 0;
1670         }
1671         c->Header.Tag.lower = c->busaddr;
1672
1673         c->Request.Type.Type = cmd_type;
1674         if (cmd_type == TYPE_CMD) {
1675                 switch (cmd) {
1676                 case CISS_INQUIRY:
1677                         /* If the logical unit number is 0 then, this is going
1678                            to controller so It's a physical command
1679                            mode = 0 target = 0.  So we have nothing to write.
1680                            otherwise, if use_unit_num == 1,
1681                            mode = 1(volume set addressing) target = LUNID
1682                            otherwise, if use_unit_num == 2,
1683                            mode = 0(periph dev addr) target = scsi3addr */
1684                         if (use_unit_num == 1) {
1685                                 c->Header.LUN.LogDev.VolId =
1686                                     h->drv[log_unit].LunID;
1687                                 c->Header.LUN.LogDev.Mode = 1;
1688                         } else if (use_unit_num == 2) {
1689                                 memcpy(c->Header.LUN.LunAddrBytes, scsi3addr,
1690                                        8);
1691                                 c->Header.LUN.LogDev.Mode = 0;
1692                         }
1693                         /* are we trying to read a vital product page */
1694                         if (page_code != 0) {
1695                                 c->Request.CDB[1] = 0x01;
1696                                 c->Request.CDB[2] = page_code;
1697                         }
1698                         c->Request.CDBLen = 6;
1699                         c->Request.Type.Attribute = ATTR_SIMPLE;
1700                         c->Request.Type.Direction = XFER_READ;
1701                         c->Request.Timeout = 0;
1702                         c->Request.CDB[0] = CISS_INQUIRY;
1703                         c->Request.CDB[4] = size & 0xFF;
1704                         break;
1705                 case CISS_REPORT_LOG:
1706                 case CISS_REPORT_PHYS:
1707                         /* Talking to controller so It's a physical command
1708                            mode = 00 target = 0.  Nothing to write.
1709                          */
1710                         c->Request.CDBLen = 12;
1711                         c->Request.Type.Attribute = ATTR_SIMPLE;
1712                         c->Request.Type.Direction = XFER_READ;
1713                         c->Request.Timeout = 0;
1714                         c->Request.CDB[0] = cmd;
1715                         c->Request.CDB[6] = (size >> 24) & 0xFF;        //MSB
1716                         c->Request.CDB[7] = (size >> 16) & 0xFF;
1717                         c->Request.CDB[8] = (size >> 8) & 0xFF;
1718                         c->Request.CDB[9] = size & 0xFF;
1719                         break;
1720
1721                 case CCISS_READ_CAPACITY:
1722                         c->Header.LUN.LogDev.VolId = h->drv[log_unit].LunID;
1723                         c->Header.LUN.LogDev.Mode = 1;
1724                         c->Request.CDBLen = 10;
1725                         c->Request.Type.Attribute = ATTR_SIMPLE;
1726                         c->Request.Type.Direction = XFER_READ;
1727                         c->Request.Timeout = 0;
1728                         c->Request.CDB[0] = cmd;
1729                         break;
1730                 case CCISS_READ_CAPACITY_16:
1731                         c->Header.LUN.LogDev.VolId = h->drv[log_unit].LunID;
1732                         c->Header.LUN.LogDev.Mode = 1;
1733                         c->Request.CDBLen = 16;
1734                         c->Request.Type.Attribute = ATTR_SIMPLE;
1735                         c->Request.Type.Direction = XFER_READ;
1736                         c->Request.Timeout = 0;
1737                         c->Request.CDB[0] = cmd;
1738                         c->Request.CDB[1] = 0x10;
1739                         c->Request.CDB[10] = (size >> 24) & 0xFF;
1740                         c->Request.CDB[11] = (size >> 16) & 0xFF;
1741                         c->Request.CDB[12] = (size >> 8) & 0xFF;
1742                         c->Request.CDB[13] = size & 0xFF;
1743                         c->Request.Timeout = 0;
1744                         c->Request.CDB[0] = cmd;
1745                         break;
1746                 case CCISS_CACHE_FLUSH:
1747                         c->Request.CDBLen = 12;
1748                         c->Request.Type.Attribute = ATTR_SIMPLE;
1749                         c->Request.Type.Direction = XFER_WRITE;
1750                         c->Request.Timeout = 0;
1751                         c->Request.CDB[0] = BMIC_WRITE;
1752                         c->Request.CDB[6] = BMIC_CACHE_FLUSH;
1753                         break;
1754                 default:
1755                         printk(KERN_WARNING
1756                                "cciss%d:  Unknown Command 0x%c\n", ctlr, cmd);
1757                         return IO_ERROR;
1758                 }
1759         } else if (cmd_type == TYPE_MSG) {
1760                 switch (cmd) {
1761                 case 0: /* ABORT message */
1762                         c->Request.CDBLen = 12;
1763                         c->Request.Type.Attribute = ATTR_SIMPLE;
1764                         c->Request.Type.Direction = XFER_WRITE;
1765                         c->Request.Timeout = 0;
1766                         c->Request.CDB[0] = cmd;        /* abort */
1767                         c->Request.CDB[1] = 0;  /* abort a command */
1768                         /* buff contains the tag of the command to abort */
1769                         memcpy(&c->Request.CDB[4], buff, 8);
1770                         break;
1771                 case 1: /* RESET message */
1772                         c->Request.CDBLen = 12;
1773                         c->Request.Type.Attribute = ATTR_SIMPLE;
1774                         c->Request.Type.Direction = XFER_WRITE;
1775                         c->Request.Timeout = 0;
1776                         memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
1777                         c->Request.CDB[0] = cmd;        /* reset */
1778                         c->Request.CDB[1] = 0x04;       /* reset a LUN */
1779                         break;
1780                 case 3: /* No-Op message */
1781                         c->Request.CDBLen = 1;
1782                         c->Request.Type.Attribute = ATTR_SIMPLE;
1783                         c->Request.Type.Direction = XFER_WRITE;
1784                         c->Request.Timeout = 0;
1785                         c->Request.CDB[0] = cmd;
1786                         break;
1787                 default:
1788                         printk(KERN_WARNING
1789                                "cciss%d: unknown message type %d\n", ctlr, cmd);
1790                         return IO_ERROR;
1791                 }
1792         } else {
1793                 printk(KERN_WARNING
1794                        "cciss%d: unknown command type %d\n", ctlr, cmd_type);
1795                 return IO_ERROR;
1796         }
1797         /* Fill in the scatter gather information */
1798         if (size > 0) {
1799                 buff_dma_handle.val = (__u64) pci_map_single(h->pdev,
1800                                                              buff, size,
1801                                                              PCI_DMA_BIDIRECTIONAL);
1802                 c->SG[0].Addr.lower = buff_dma_handle.val32.lower;
1803                 c->SG[0].Addr.upper = buff_dma_handle.val32.upper;
1804                 c->SG[0].Len = size;
1805                 c->SG[0].Ext = 0;       /* we are not chaining */
1806         }
1807         return status;
1808 }
1809
1810 static int sendcmd_withirq(__u8 cmd,
1811                            int ctlr,
1812                            void *buff,
1813                            size_t size,
1814                            unsigned int use_unit_num,
1815                            unsigned int log_unit, __u8 page_code, int cmd_type)
1816 {
1817         ctlr_info_t *h = hba[ctlr];
1818         CommandList_struct *c;
1819         u64bit buff_dma_handle;
1820         unsigned long flags;
1821         int return_status;
1822         DECLARE_COMPLETION_ONSTACK(wait);
1823
1824         if ((c = cmd_alloc(h, 0)) == NULL)
1825                 return -ENOMEM;
1826         return_status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num,
1827                                  log_unit, page_code, NULL, cmd_type);
1828         if (return_status != IO_OK) {
1829                 cmd_free(h, c, 0);
1830                 return return_status;
1831         }
1832       resend_cmd2:
1833         c->waiting = &wait;
1834
1835         /* Put the request on the tail of the queue and send it */
1836         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
1837         addQ(&h->reqQ, c);
1838         h->Qdepth++;
1839         start_io(h);
1840         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
1841
1842         wait_for_completion(&wait);
1843
1844         if (c->err_info->CommandStatus != 0) {  /* an error has occurred */
1845                 switch (c->err_info->CommandStatus) {
1846                 case CMD_TARGET_STATUS:
1847                         printk(KERN_WARNING "cciss: cmd %p has "
1848                                " completed with errors\n", c);
1849                         if (c->err_info->ScsiStatus) {
1850                                 printk(KERN_WARNING "cciss: cmd %p "
1851                                        "has SCSI Status = %x\n",
1852                                        c, c->err_info->ScsiStatus);
1853                         }
1854
1855                         break;
1856                 case CMD_DATA_UNDERRUN:
1857                 case CMD_DATA_OVERRUN:
1858                         /* expected for inquire and report lun commands */
1859                         break;
1860                 case CMD_INVALID:
1861                         printk(KERN_WARNING "cciss: Cmd %p is "
1862                                "reported invalid\n", c);
1863                         return_status = IO_ERROR;
1864                         break;
1865                 case CMD_PROTOCOL_ERR:
1866                         printk(KERN_WARNING "cciss: cmd %p has "
1867                                "protocol error \n", c);
1868                         return_status = IO_ERROR;
1869                         break;
1870                 case CMD_HARDWARE_ERR:
1871                         printk(KERN_WARNING "cciss: cmd %p had "
1872                                " hardware error\n", c);
1873                         return_status = IO_ERROR;
1874                         break;
1875                 case CMD_CONNECTION_LOST:
1876                         printk(KERN_WARNING "cciss: cmd %p had "
1877                                "connection lost\n", c);
1878                         return_status = IO_ERROR;
1879                         break;
1880                 case CMD_ABORTED:
1881                         printk(KERN_WARNING "cciss: cmd %p was "
1882                                "aborted\n", c);
1883                         return_status = IO_ERROR;
1884                         break;
1885                 case CMD_ABORT_FAILED:
1886                         printk(KERN_WARNING "cciss: cmd %p reports "
1887                                "abort failed\n", c);
1888                         return_status = IO_ERROR;
1889                         break;
1890                 case CMD_UNSOLICITED_ABORT:
1891                         printk(KERN_WARNING
1892                                "cciss%d: unsolicited abort %p\n", ctlr, c);
1893                         if (c->retry_count < MAX_CMD_RETRIES) {
1894                                 printk(KERN_WARNING
1895                                        "cciss%d: retrying %p\n", ctlr, c);
1896                                 c->retry_count++;
1897                                 /* erase the old error information */
1898                                 memset(c->err_info, 0,
1899                                        sizeof(ErrorInfo_struct));
1900                                 return_status = IO_OK;
1901                                 INIT_COMPLETION(wait);
1902                                 goto resend_cmd2;
1903                         }
1904                         return_status = IO_ERROR;
1905                         break;
1906                 default:
1907                         printk(KERN_WARNING "cciss: cmd %p returned "
1908                                "unknown status %x\n", c,
1909                                c->err_info->CommandStatus);
1910                         return_status = IO_ERROR;
1911                 }
1912         }
1913         /* unlock the buffers from DMA */
1914         buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
1915         buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
1916         pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val,
1917                          c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
1918         cmd_free(h, c, 0);
1919         return return_status;
1920 }
1921
1922 static void cciss_geometry_inquiry(int ctlr, int logvol,
1923                                    int withirq, sector_t total_size,
1924                                    unsigned int block_size,
1925                                    InquiryData_struct *inq_buff,
1926                                    drive_info_struct *drv)
1927 {
1928         int return_code;
1929         unsigned long t;
1930
1931         memset(inq_buff, 0, sizeof(InquiryData_struct));
1932         if (withirq)
1933                 return_code = sendcmd_withirq(CISS_INQUIRY, ctlr,
1934                                               inq_buff, sizeof(*inq_buff), 1,
1935                                               logvol, 0xC1, TYPE_CMD);
1936         else
1937                 return_code = sendcmd(CISS_INQUIRY, ctlr, inq_buff,
1938                                       sizeof(*inq_buff), 1, logvol, 0xC1, NULL,
1939                                       TYPE_CMD);
1940         if (return_code == IO_OK) {
1941                 if (inq_buff->data_byte[8] == 0xFF) {
1942                         printk(KERN_WARNING
1943                                "cciss: reading geometry failed, volume "
1944                                "does not support reading geometry\n");
1945                         drv->heads = 255;
1946                         drv->sectors = 32;      // Sectors per track
1947                         drv->cylinders = total_size + 1;
1948                         drv->raid_level = RAID_UNKNOWN;
1949                 } else {
1950                         drv->heads = inq_buff->data_byte[6];
1951                         drv->sectors = inq_buff->data_byte[7];
1952                         drv->cylinders = (inq_buff->data_byte[4] & 0xff) << 8;
1953                         drv->cylinders += inq_buff->data_byte[5];
1954                         drv->raid_level = inq_buff->data_byte[8];
1955                 }
1956                 drv->block_size = block_size;
1957                 drv->nr_blocks = total_size + 1;
1958                 t = drv->heads * drv->sectors;
1959                 if (t > 1) {
1960                         sector_t real_size = total_size + 1;
1961                         unsigned long rem = sector_div(real_size, t);
1962                         if (rem)
1963                                 real_size++;
1964                         drv->cylinders = real_size;
1965                 }
1966         } else {                /* Get geometry failed */
1967                 printk(KERN_WARNING "cciss: reading geometry failed\n");
1968         }
1969         printk(KERN_INFO "      heads=%d, sectors=%d, cylinders=%d\n\n",
1970                drv->heads, drv->sectors, drv->cylinders);
1971 }
1972
1973 static void
1974 cciss_read_capacity(int ctlr, int logvol, int withirq, sector_t *total_size,
1975                     unsigned int *block_size)
1976 {
1977         ReadCapdata_struct *buf;
1978         int return_code;
1979
1980         buf = kzalloc(sizeof(ReadCapdata_struct), GFP_KERNEL);
1981         if (!buf) {
1982                 printk(KERN_WARNING "cciss: out of memory\n");
1983                 return;
1984         }
1985
1986         if (withirq)
1987                 return_code = sendcmd_withirq(CCISS_READ_CAPACITY,
1988                                 ctlr, buf, sizeof(ReadCapdata_struct),
1989                                         1, logvol, 0, TYPE_CMD);
1990         else
1991                 return_code = sendcmd(CCISS_READ_CAPACITY,
1992                                 ctlr, buf, sizeof(ReadCapdata_struct),
1993                                         1, logvol, 0, NULL, TYPE_CMD);
1994         if (return_code == IO_OK) {
1995                 *total_size = be32_to_cpu(*(__be32 *) buf->total_size);
1996                 *block_size = be32_to_cpu(*(__be32 *) buf->block_size);
1997         } else {                /* read capacity command failed */
1998                 printk(KERN_WARNING "cciss: read capacity failed\n");
1999                 *total_size = 0;
2000                 *block_size = BLOCK_SIZE;
2001         }
2002         if (*total_size != 0)
2003                 printk(KERN_INFO "      blocks= %llu block_size= %d\n",
2004                 (unsigned long long)*total_size+1, *block_size);
2005         kfree(buf);
2006 }
2007
2008 static void
2009 cciss_read_capacity_16(int ctlr, int logvol, int withirq, sector_t *total_size,                                 unsigned int *block_size)
2010 {
2011         ReadCapdata_struct_16 *buf;
2012         int return_code;
2013
2014         buf = kzalloc(sizeof(ReadCapdata_struct_16), GFP_KERNEL);
2015         if (!buf) {
2016                 printk(KERN_WARNING "cciss: out of memory\n");
2017                 return;
2018         }
2019
2020         if (withirq) {
2021                 return_code = sendcmd_withirq(CCISS_READ_CAPACITY_16,
2022                         ctlr, buf, sizeof(ReadCapdata_struct_16),
2023                                 1, logvol, 0, TYPE_CMD);
2024         }
2025         else {
2026                 return_code = sendcmd(CCISS_READ_CAPACITY_16,
2027                         ctlr, buf, sizeof(ReadCapdata_struct_16),
2028                                 1, logvol, 0, NULL, TYPE_CMD);
2029         }
2030         if (return_code == IO_OK) {
2031                 *total_size = be64_to_cpu(*(__be64 *) buf->total_size);
2032                 *block_size = be32_to_cpu(*(__be32 *) buf->block_size);
2033         } else {                /* read capacity command failed */
2034                 printk(KERN_WARNING "cciss: read capacity failed\n");
2035                 *total_size = 0;
2036                 *block_size = BLOCK_SIZE;
2037         }
2038         printk(KERN_INFO "      blocks= %llu block_size= %d\n",
2039                (unsigned long long)*total_size+1, *block_size);
2040         kfree(buf);
2041 }
2042
2043 static int cciss_revalidate(struct gendisk *disk)
2044 {
2045         ctlr_info_t *h = get_host(disk);
2046         drive_info_struct *drv = get_drv(disk);
2047         int logvol;
2048         int FOUND = 0;
2049         unsigned int block_size;
2050         sector_t total_size;
2051         InquiryData_struct *inq_buff = NULL;
2052
2053         for (logvol = 0; logvol < CISS_MAX_LUN; logvol++) {
2054                 if (h->drv[logvol].LunID == drv->LunID) {
2055                         FOUND = 1;
2056                         break;
2057                 }
2058         }
2059
2060         if (!FOUND)
2061                 return 1;
2062
2063         inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
2064         if (inq_buff == NULL) {
2065                 printk(KERN_WARNING "cciss: out of memory\n");
2066                 return 1;
2067         }
2068         if (h->cciss_read == CCISS_READ_10) {
2069                 cciss_read_capacity(h->ctlr, logvol, 1,
2070                                         &total_size, &block_size);
2071         } else {
2072                 cciss_read_capacity_16(h->ctlr, logvol, 1,
2073                                         &total_size, &block_size);
2074         }
2075         cciss_geometry_inquiry(h->ctlr, logvol, 1, total_size, block_size,
2076                                inq_buff, drv);
2077
2078         blk_queue_hardsect_size(drv->queue, drv->block_size);
2079         set_capacity(disk, drv->nr_blocks);
2080
2081         kfree(inq_buff);
2082         return 0;
2083 }
2084
2085 /*
2086  *   Wait polling for a command to complete.
2087  *   The memory mapped FIFO is polled for the completion.
2088  *   Used only at init time, interrupts from the HBA are disabled.
2089  */
2090 static unsigned long pollcomplete(int ctlr)
2091 {
2092         unsigned long done;
2093         int i;
2094
2095         /* Wait (up to 20 seconds) for a command to complete */
2096
2097         for (i = 20 * HZ; i > 0; i--) {
2098                 done = hba[ctlr]->access.command_completed(hba[ctlr]);
2099                 if (done == FIFO_EMPTY)
2100                         schedule_timeout_uninterruptible(1);
2101                 else
2102                         return done;
2103         }
2104         /* Invalid address to tell caller we ran out of time */
2105         return 1;
2106 }
2107
2108 static int add_sendcmd_reject(__u8 cmd, int ctlr, unsigned long complete)
2109 {
2110         /* We get in here if sendcmd() is polling for completions
2111            and gets some command back that it wasn't expecting --
2112            something other than that which it just sent down.
2113            Ordinarily, that shouldn't happen, but it can happen when
2114            the scsi tape stuff gets into error handling mode, and
2115            starts using sendcmd() to try to abort commands and
2116            reset tape drives.  In that case, sendcmd may pick up
2117            completions of commands that were sent to logical drives
2118            through the block i/o system, or cciss ioctls completing, etc.
2119            In that case, we need to save those completions for later
2120            processing by the interrupt handler.
2121          */
2122
2123 #ifdef CONFIG_CISS_SCSI_TAPE
2124         struct sendcmd_reject_list *srl = &hba[ctlr]->scsi_rejects;
2125
2126         /* If it's not the scsi tape stuff doing error handling, (abort */
2127         /* or reset) then we don't expect anything weird. */
2128         if (cmd != CCISS_RESET_MSG && cmd != CCISS_ABORT_MSG) {
2129 #endif
2130                 printk(KERN_WARNING "cciss cciss%d: SendCmd "
2131                        "Invalid command list address returned! (%lx)\n",
2132                        ctlr, complete);
2133                 /* not much we can do. */
2134 #ifdef CONFIG_CISS_SCSI_TAPE
2135                 return 1;
2136         }
2137
2138         /* We've sent down an abort or reset, but something else
2139            has completed */
2140         if (srl->ncompletions >= (hba[ctlr]->nr_cmds + 2)) {
2141                 /* Uh oh.  No room to save it for later... */
2142                 printk(KERN_WARNING "cciss%d: Sendcmd: Invalid command addr, "
2143                        "reject list overflow, command lost!\n", ctlr);
2144                 return 1;
2145         }
2146         /* Save it for later */
2147         srl->complete[srl->ncompletions] = complete;
2148         srl->ncompletions++;
2149 #endif
2150         return 0;
2151 }
2152
2153 /*
2154  * Send a command to the controller, and wait for it to complete.
2155  * Only used at init time.
2156  */
2157 static int sendcmd(__u8 cmd, int ctlr, void *buff, size_t size, unsigned int use_unit_num,      /* 0: address the controller,
2158                                                                                                    1: address logical volume log_unit,
2159                                                                                                    2: periph device address is scsi3addr */
2160                    unsigned int log_unit,
2161                    __u8 page_code, unsigned char *scsi3addr, int cmd_type)
2162 {
2163         CommandList_struct *c;
2164         int i;
2165         unsigned long complete;
2166         ctlr_info_t *info_p = hba[ctlr];
2167         u64bit buff_dma_handle;
2168         int status, done = 0;
2169
2170         if ((c = cmd_alloc(info_p, 1)) == NULL) {
2171                 printk(KERN_WARNING "cciss: unable to get memory");
2172                 return IO_ERROR;
2173         }
2174         status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num,
2175                           log_unit, page_code, scsi3addr, cmd_type);
2176         if (status != IO_OK) {
2177                 cmd_free(info_p, c, 1);
2178                 return status;
2179         }
2180       resend_cmd1:
2181         /*
2182          * Disable interrupt
2183          */
2184 #ifdef CCISS_DEBUG
2185         printk(KERN_DEBUG "cciss: turning intr off\n");
2186 #endif                          /* CCISS_DEBUG */
2187         info_p->access.set_intr_mask(info_p, CCISS_INTR_OFF);
2188
2189         /* Make sure there is room in the command FIFO */
2190         /* Actually it should be completely empty at this time */
2191         /* unless we are in here doing error handling for the scsi */
2192         /* tape side of the driver. */
2193         for (i = 200000; i > 0; i--) {
2194                 /* if fifo isn't full go */
2195                 if (!(info_p->access.fifo_full(info_p))) {
2196
2197                         break;
2198                 }
2199                 udelay(10);
2200                 printk(KERN_WARNING "cciss cciss%d: SendCmd FIFO full,"
2201                        " waiting!\n", ctlr);
2202         }
2203         /*
2204          * Send the cmd
2205          */
2206         info_p->access.submit_command(info_p, c);
2207         done = 0;
2208         do {
2209                 complete = pollcomplete(ctlr);
2210
2211 #ifdef CCISS_DEBUG
2212                 printk(KERN_DEBUG "cciss: command completed\n");
2213 #endif                          /* CCISS_DEBUG */
2214
2215                 if (complete == 1) {
2216                         printk(KERN_WARNING
2217                                "cciss cciss%d: SendCmd Timeout out, "
2218                                "No command list address returned!\n", ctlr);
2219                         status = IO_ERROR;
2220                         done = 1;
2221                         break;
2222                 }
2223
2224                 /* This will need to change for direct lookup completions */
2225                 if ((complete & CISS_ERROR_BIT)
2226                     && (complete & ~CISS_ERROR_BIT) == c->busaddr) {
2227                         /* if data overrun or underun on Report command
2228                            ignore it
2229                          */
2230                         if (((c->Request.CDB[0] == CISS_REPORT_LOG) ||
2231                              (c->Request.CDB[0] == CISS_REPORT_PHYS) ||
2232                              (c->Request.CDB[0] == CISS_INQUIRY)) &&
2233                             ((c->err_info->CommandStatus ==
2234                               CMD_DATA_OVERRUN) ||
2235                              (c->err_info->CommandStatus == CMD_DATA_UNDERRUN)
2236                             )) {
2237                                 complete = c->busaddr;
2238                         } else {
2239                                 if (c->err_info->CommandStatus ==
2240                                     CMD_UNSOLICITED_ABORT) {
2241                                         printk(KERN_WARNING "cciss%d: "
2242                                                "unsolicited abort %p\n",
2243                                                ctlr, c);
2244                                         if (c->retry_count < MAX_CMD_RETRIES) {
2245                                                 printk(KERN_WARNING
2246                                                        "cciss%d: retrying %p\n",
2247                                                        ctlr, c);
2248                                                 c->retry_count++;
2249                                                 /* erase the old error */
2250                                                 /* information */
2251                                                 memset(c->err_info, 0,
2252                                                        sizeof
2253                                                        (ErrorInfo_struct));
2254                                                 goto resend_cmd1;
2255                                         } else {
2256                                                 printk(KERN_WARNING
2257                                                        "cciss%d: retried %p too "
2258                                                        "many times\n", ctlr, c);
2259                                                 status = IO_ERROR;
2260                                                 goto cleanup1;
2261                                         }
2262                                 } else if (c->err_info->CommandStatus ==
2263                                            CMD_UNABORTABLE) {
2264                                         printk(KERN_WARNING
2265                                                "cciss%d: command could not be aborted.\n",
2266                                                ctlr);
2267                                         status = IO_ERROR;
2268                                         goto cleanup1;
2269                                 }
2270                                 printk(KERN_WARNING "ciss ciss%d: sendcmd"
2271                                        " Error %x \n", ctlr,
2272                                        c->err_info->CommandStatus);
2273                                 printk(KERN_WARNING "ciss ciss%d: sendcmd"
2274                                        " offensive info\n"
2275                                        "  size %x\n   num %x   value %x\n",
2276                                        ctlr,
2277                                        c->err_info->MoreErrInfo.Invalid_Cmd.
2278                                        offense_size,
2279                                        c->err_info->MoreErrInfo.Invalid_Cmd.
2280                                        offense_num,
2281                                        c->err_info->MoreErrInfo.Invalid_Cmd.
2282                                        offense_value);
2283                                 status = IO_ERROR;
2284                                 goto cleanup1;
2285                         }
2286                 }
2287                 /* This will need changing for direct lookup completions */
2288                 if (complete != c->busaddr) {
2289                         if (add_sendcmd_reject(cmd, ctlr, complete) != 0) {
2290                                 BUG();  /* we are pretty much hosed if we get here. */
2291                         }
2292                         continue;
2293                 } else
2294                         done = 1;
2295         } while (!done);
2296
2297       cleanup1:
2298         /* unlock the data buffer from DMA */
2299         buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
2300         buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
2301         pci_unmap_single(info_p->pdev, (dma_addr_t) buff_dma_handle.val,
2302                          c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
2303 #ifdef CONFIG_CISS_SCSI_TAPE
2304         /* if we saved some commands for later, process them now. */
2305         if (info_p->scsi_rejects.ncompletions > 0)
2306                 do_cciss_intr(0, info_p);
2307 #endif
2308         cmd_free(info_p, c, 1);
2309         return status;
2310 }
2311
2312 /*
2313  * Map (physical) PCI mem into (virtual) kernel space
2314  */
2315 static void __iomem *remap_pci_mem(ulong base, ulong size)
2316 {
2317         ulong page_base = ((ulong) base) & PAGE_MASK;
2318         ulong page_offs = ((ulong) base) - page_base;
2319         void __iomem *page_remapped = ioremap(page_base, page_offs + size);
2320
2321         return page_remapped ? (page_remapped + page_offs) : NULL;
2322 }
2323
2324 /*
2325  * Takes jobs of the Q and sends them to the hardware, then puts it on
2326  * the Q to wait for completion.
2327  */
2328 static void start_io(ctlr_info_t *h)
2329 {
2330         CommandList_struct *c;
2331
2332         while ((c = h->reqQ) != NULL) {
2333                 /* can't do anything if fifo is full */
2334                 if ((h->access.fifo_full(h))) {
2335                         printk(KERN_WARNING "cciss: fifo full\n");
2336                         break;
2337                 }
2338
2339                 /* Get the first entry from the Request Q */
2340                 removeQ(&(h->reqQ), c);
2341                 h->Qdepth--;
2342
2343                 /* Tell the controller execute command */
2344                 h->access.submit_command(h, c);
2345
2346                 /* Put job onto the completed Q */
2347                 addQ(&(h->cmpQ), c);
2348         }
2349 }
2350
2351 /* Assumes that CCISS_LOCK(h->ctlr) is held. */
2352 /* Zeros out the error record and then resends the command back */
2353 /* to the controller */
2354 static inline void resend_cciss_cmd(ctlr_info_t *h, CommandList_struct *c)
2355 {
2356         /* erase the old error information */
2357         memset(c->err_info, 0, sizeof(ErrorInfo_struct));
2358
2359         /* add it to software queue and then send it to the controller */
2360         addQ(&(h->reqQ), c);
2361         h->Qdepth++;
2362         if (h->Qdepth > h->maxQsinceinit)
2363                 h->maxQsinceinit = h->Qdepth;
2364
2365         start_io(h);
2366 }
2367
2368 static inline int evaluate_target_status(CommandList_struct *cmd)
2369 {
2370         unsigned char sense_key;
2371         int error_count = 1;
2372
2373         if (cmd->err_info->ScsiStatus != 0x02) { /* not check condition? */
2374                 if (!blk_pc_request(cmd->rq))
2375                         printk(KERN_WARNING "cciss: cmd %p "
2376                                "has SCSI Status 0x%x\n",
2377                                cmd, cmd->err_info->ScsiStatus);
2378                 return error_count;
2379         }
2380
2381         /* check the sense key */
2382         sense_key = 0xf & cmd->err_info->SenseInfo[2];
2383         /* no status or recovered error */
2384         if ((sense_key == 0x0) || (sense_key == 0x1))
2385                 error_count = 0;
2386
2387         if (!blk_pc_request(cmd->rq)) { /* Not SG_IO or similar? */
2388                 if (error_count != 0)
2389                         printk(KERN_WARNING "cciss: cmd %p has CHECK CONDITION"
2390                                " sense key = 0x%x\n", cmd, sense_key);
2391                 return error_count;
2392         }
2393
2394         /* SG_IO or similar, copy sense data back */
2395         if (cmd->rq->sense) {
2396                 if (cmd->rq->sense_len > cmd->err_info->SenseLen)
2397                         cmd->rq->sense_len = cmd->err_info->SenseLen;
2398                 memcpy(cmd->rq->sense, cmd->err_info->SenseInfo,
2399                         cmd->rq->sense_len);
2400         } else
2401                 cmd->rq->sense_len = 0;
2402
2403         return error_count;
2404 }
2405
2406 /* checks the status of the job and calls complete buffers to mark all
2407  * buffers for the completed job. Note that this function does not need
2408  * to hold the hba/queue lock.
2409  */
2410 static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
2411                                     int timeout)
2412 {
2413         int retry_cmd = 0;
2414         struct request *rq = cmd->rq;
2415
2416         rq->errors = 0;
2417
2418         if (timeout)
2419                 rq->errors = 1;
2420
2421         if (cmd->err_info->CommandStatus == 0)  /* no error has occurred */
2422                 goto after_error_processing;
2423
2424         switch (cmd->err_info->CommandStatus) {
2425         case CMD_TARGET_STATUS:
2426                 rq->errors = evaluate_target_status(cmd);
2427                 break;
2428         case CMD_DATA_UNDERRUN:
2429                 if (blk_fs_request(cmd->rq)) {
2430                         printk(KERN_WARNING "cciss: cmd %p has"
2431                                " completed with data underrun "
2432                                "reported\n", cmd);
2433                         cmd->rq->data_len = cmd->err_info->ResidualCnt;
2434                 }
2435                 break;
2436         case CMD_DATA_OVERRUN:
2437                 if (blk_fs_request(cmd->rq))
2438                         printk(KERN_WARNING "cciss: cmd %p has"
2439                                " completed with data overrun "
2440                                "reported\n", cmd);
2441                 break;
2442         case CMD_INVALID:
2443                 printk(KERN_WARNING "cciss: cmd %p is "
2444                        "reported invalid\n", cmd);
2445                 rq->errors = 1;
2446                 break;
2447         case CMD_PROTOCOL_ERR:
2448                 printk(KERN_WARNING "cciss: cmd %p has "
2449                        "protocol error \n", cmd);
2450                 rq->errors = 1;
2451                 break;
2452         case CMD_HARDWARE_ERR:
2453                 printk(KERN_WARNING "cciss: cmd %p had "
2454                        " hardware error\n", cmd);
2455                 rq->errors = 1;
2456                 break;
2457         case CMD_CONNECTION_LOST:
2458                 printk(KERN_WARNING "cciss: cmd %p had "
2459                        "connection lost\n", cmd);
2460                 rq->errors = 1;
2461                 break;
2462         case CMD_ABORTED:
2463                 printk(KERN_WARNING "cciss: cmd %p was "
2464                        "aborted\n", cmd);
2465                 rq->errors = 1;
2466                 break;
2467         case CMD_ABORT_FAILED:
2468                 printk(KERN_WARNING "cciss: cmd %p reports "
2469                        "abort failed\n", cmd);
2470                 rq->errors = 1;
2471                 break;
2472         case CMD_UNSOLICITED_ABORT:
2473                 printk(KERN_WARNING "cciss%d: unsolicited "
2474                        "abort %p\n", h->ctlr, cmd);
2475                 if (cmd->retry_count < MAX_CMD_RETRIES) {
2476                         retry_cmd = 1;
2477                         printk(KERN_WARNING
2478                                "cciss%d: retrying %p\n", h->ctlr, cmd);
2479                         cmd->retry_count++;
2480                 } else
2481                         printk(KERN_WARNING
2482                                "cciss%d: %p retried too "
2483                                "many times\n", h->ctlr, cmd);
2484                 rq->errors = 1;
2485                 break;
2486         case CMD_TIMEOUT:
2487                 printk(KERN_WARNING "cciss: cmd %p timedout\n", cmd);
2488                 rq->errors = 1;
2489                 break;
2490         default:
2491                 printk(KERN_WARNING "cciss: cmd %p returned "
2492                        "unknown status %x\n", cmd,
2493                        cmd->err_info->CommandStatus);
2494                 rq->errors = 1;
2495         }
2496
2497 after_error_processing:
2498
2499         /* We need to return this command */
2500         if (retry_cmd) {
2501                 resend_cciss_cmd(h, cmd);
2502                 return;
2503         }
2504         cmd->rq->data_len = 0;
2505         cmd->rq->completion_data = cmd;
2506         blk_add_trace_rq(cmd->rq->q, cmd->rq, BLK_TA_COMPLETE);
2507         blk_complete_request(cmd->rq);
2508 }
2509
2510 /*
2511  * Get a request and submit it to the controller.
2512  */
2513 static void do_cciss_request(struct request_queue *q)
2514 {
2515         ctlr_info_t *h = q->queuedata;
2516         CommandList_struct *c;
2517         sector_t start_blk;
2518         int seg;
2519         struct request *creq;
2520         u64bit temp64;
2521         struct scatterlist tmp_sg[MAXSGENTRIES];
2522         drive_info_struct *drv;
2523         int i, dir;
2524
2525         /* We call start_io here in case there is a command waiting on the
2526          * queue that has not been sent.
2527          */
2528         if (blk_queue_plugged(q))
2529                 goto startio;
2530
2531       queue:
2532         creq = elv_next_request(q);
2533         if (!creq)
2534                 goto startio;
2535
2536         BUG_ON(creq->nr_phys_segments > MAXSGENTRIES);
2537
2538         if ((c = cmd_alloc(h, 1)) == NULL)
2539                 goto full;
2540
2541         blkdev_dequeue_request(creq);
2542
2543         spin_unlock_irq(q->queue_lock);
2544
2545         c->cmd_type = CMD_RWREQ;
2546         c->rq = creq;
2547
2548         /* fill in the request */
2549         drv = creq->rq_disk->private_data;
2550         c->Header.ReplyQueue = 0;       // unused in simple mode
2551         /* got command from pool, so use the command block index instead */
2552         /* for direct lookups. */
2553         /* The first 2 bits are reserved for controller error reporting. */
2554         c->Header.Tag.lower = (c->cmdindex << 3);
2555         c->Header.Tag.lower |= 0x04;    /* flag for direct lookup. */
2556         c->Header.LUN.LogDev.VolId = drv->LunID;
2557         c->Header.LUN.LogDev.Mode = 1;
2558         c->Request.CDBLen = 10; // 12 byte commands not in FW yet;
2559         c->Request.Type.Type = TYPE_CMD;        // It is a command.
2560         c->Request.Type.Attribute = ATTR_SIMPLE;
2561         c->Request.Type.Direction =
2562             (rq_data_dir(creq) == READ) ? XFER_READ : XFER_WRITE;
2563         c->Request.Timeout = 0; // Don't time out
2564         c->Request.CDB[0] =
2565             (rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
2566         start_blk = creq->sector;
2567 #ifdef CCISS_DEBUG
2568         printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n", (int)creq->sector,
2569                (int)creq->nr_sectors);
2570 #endif                          /* CCISS_DEBUG */
2571
2572         seg = blk_rq_map_sg(q, creq, tmp_sg);
2573
2574         /* get the DMA records for the setup */
2575         if (c->Request.Type.Direction == XFER_READ)
2576                 dir = PCI_DMA_FROMDEVICE;
2577         else
2578                 dir = PCI_DMA_TODEVICE;
2579
2580         for (i = 0; i < seg; i++) {
2581                 c->SG[i].Len = tmp_sg[i].length;
2582                 temp64.val = (__u64) pci_map_page(h->pdev, tmp_sg[i].page,
2583                                                   tmp_sg[i].offset,
2584                                                   tmp_sg[i].length, dir);
2585                 c->SG[i].Addr.lower = temp64.val32.lower;
2586                 c->SG[i].Addr.upper = temp64.val32.upper;
2587                 c->SG[i].Ext = 0;       // we are not chaining
2588         }
2589         /* track how many SG entries we are using */
2590         if (seg > h->maxSG)
2591                 h->maxSG = seg;
2592
2593 #ifdef CCISS_DEBUG
2594         printk(KERN_DEBUG "cciss: Submitting %d sectors in %d segments\n",
2595                creq->nr_sectors, seg);
2596 #endif                          /* CCISS_DEBUG */
2597
2598         c->Header.SGList = c->Header.SGTotal = seg;
2599         if (likely(blk_fs_request(creq))) {
2600                 if(h->cciss_read == CCISS_READ_10) {
2601                         c->Request.CDB[1] = 0;
2602                         c->Request.CDB[2] = (start_blk >> 24) & 0xff;   //MSB
2603                         c->Request.CDB[3] = (start_blk >> 16) & 0xff;
2604                         c->Request.CDB[4] = (start_blk >> 8) & 0xff;
2605                         c->Request.CDB[5] = start_blk & 0xff;
2606                         c->Request.CDB[6] = 0;  // (sect >> 24) & 0xff; MSB
2607                         c->Request.CDB[7] = (creq->nr_sectors >> 8) & 0xff;
2608                         c->Request.CDB[8] = creq->nr_sectors & 0xff;
2609                         c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
2610                 } else {
2611                         c->Request.CDBLen = 16;
2612                         c->Request.CDB[1]= 0;
2613                         c->Request.CDB[2]= (start_blk >> 56) & 0xff;    //MSB
2614                         c->Request.CDB[3]= (start_blk >> 48) & 0xff;
2615                         c->Request.CDB[4]= (start_blk >> 40) & 0xff;
2616                         c->Request.CDB[5]= (start_blk >> 32) & 0xff;
2617                         c->Request.CDB[6]= (start_blk >> 24) & 0xff;
2618                         c->Request.CDB[7]= (start_blk >> 16) & 0xff;
2619                         c->Request.CDB[8]= (start_blk >>  8) & 0xff;
2620                         c->Request.CDB[9]= start_blk & 0xff;
2621                         c->Request.CDB[10]= (creq->nr_sectors >>  24) & 0xff;
2622                         c->Request.CDB[11]= (creq->nr_sectors >>  16) & 0xff;
2623                         c->Request.CDB[12]= (creq->nr_sectors >>  8) & 0xff;
2624                         c->Request.CDB[13]= creq->nr_sectors & 0xff;
2625                         c->Request.CDB[14] = c->Request.CDB[15] = 0;
2626                 }
2627         } else if (blk_pc_request(creq)) {
2628                 c->Request.CDBLen = creq->cmd_len;
2629                 memcpy(c->Request.CDB, creq->cmd, BLK_MAX_CDB);
2630         } else {
2631                 printk(KERN_WARNING "cciss%d: bad request type %d\n", h->ctlr, creq->cmd_type);
2632                 BUG();
2633         }
2634
2635         spin_lock_irq(q->queue_lock);
2636
2637         addQ(&(h->reqQ), c);
2638         h->Qdepth++;
2639         if (h->Qdepth > h->maxQsinceinit)
2640                 h->maxQsinceinit = h->Qdepth;
2641
2642         goto queue;
2643 full:
2644         blk_stop_queue(q);
2645 startio:
2646         /* We will already have the driver lock here so not need
2647          * to lock it.
2648          */
2649         start_io(h);
2650 }
2651
2652 static inline unsigned long get_next_completion(ctlr_info_t *h)
2653 {
2654 #ifdef CONFIG_CISS_SCSI_TAPE
2655         /* Any rejects from sendcmd() lying around? Process them first */
2656         if (h->scsi_rejects.ncompletions == 0)
2657                 return h->access.command_completed(h);
2658         else {
2659                 struct sendcmd_reject_list *srl;
2660                 int n;
2661                 srl = &h->scsi_rejects;
2662                 n = --srl->ncompletions;
2663                 /* printk("cciss%d: processing saved reject\n", h->ctlr); */
2664                 printk("p");
2665                 return srl->complete[n];
2666         }
2667 #else
2668         return h->access.command_completed(h);
2669 #endif
2670 }
2671
2672 static inline int interrupt_pending(ctlr_info_t *h)
2673 {
2674 #ifdef CONFIG_CISS_SCSI_TAPE
2675         return (h->access.intr_pending(h)
2676                 || (h->scsi_rejects.ncompletions > 0));
2677 #else
2678         return h->access.intr_pending(h);
2679 #endif
2680 }
2681
2682 static inline long interrupt_not_for_us(ctlr_info_t *h)
2683 {
2684 #ifdef CONFIG_CISS_SCSI_TAPE
2685         return (((h->access.intr_pending(h) == 0) ||
2686                  (h->interrupts_enabled == 0))
2687                 && (h->scsi_rejects.ncompletions == 0));
2688 #else
2689         return (((h->access.intr_pending(h) == 0) ||
2690                  (h->interrupts_enabled == 0)));
2691 #endif
2692 }
2693
2694 static irqreturn_t do_cciss_intr(int irq, void *dev_id)
2695 {
2696         ctlr_info_t *h = dev_id;
2697         CommandList_struct *c;
2698         unsigned long flags;
2699         __u32 a, a1, a2;
2700
2701         if (interrupt_not_for_us(h))
2702                 return IRQ_NONE;
2703         /*
2704          * If there are completed commands in the completion queue,
2705          * we had better do something about it.
2706          */
2707         spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
2708         while (interrupt_pending(h)) {
2709                 while ((a = get_next_completion(h)) != FIFO_EMPTY) {
2710                         a1 = a;
2711                         if ((a & 0x04)) {
2712                                 a2 = (a >> 3);
2713                                 if (a2 >= h->nr_cmds) {
2714                                         printk(KERN_WARNING
2715                                                "cciss: controller cciss%d failed, stopping.\n",
2716                                                h->ctlr);
2717                                         fail_all_cmds(h->ctlr);
2718                                         return IRQ_HANDLED;
2719                                 }
2720
2721                                 c = h->cmd_pool + a2;
2722                                 a = c->busaddr;
2723
2724                         } else {
2725                                 a &= ~3;
2726                                 if ((c = h->cmpQ) == NULL) {
2727                                         printk(KERN_WARNING
2728                                                "cciss: Completion of %08x ignored\n",
2729                                                a1);
2730                                         continue;
2731                                 }
2732                                 while (c->busaddr != a) {
2733                                         c = c->next;
2734                                         if (c == h->cmpQ)
2735                                                 break;
2736                                 }
2737                         }
2738                         /*
2739                          * If we've found the command, take it off the
2740                          * completion Q and free it
2741                          */
2742                         if (c->busaddr == a) {
2743                                 removeQ(&h->cmpQ, c);
2744                                 if (c->cmd_type == CMD_RWREQ) {
2745                                         complete_command(h, c, 0);
2746                                 } else if (c->cmd_type == CMD_IOCTL_PEND) {
2747                                         complete(c->waiting);
2748                                 }
2749 #                               ifdef CONFIG_CISS_SCSI_TAPE
2750                                 else if (c->cmd_type == CMD_SCSI)
2751                                         complete_scsi_command(c, 0, a1);
2752 #                               endif
2753                                 continue;
2754                         }
2755                 }
2756         }
2757
2758         spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
2759         return IRQ_HANDLED;
2760 }
2761
2762 /*
2763  *  We cannot read the structure directly, for portability we must use
2764  *   the io functions.
2765  *   This is for debug only.
2766  */
2767 #ifdef CCISS_DEBUG
2768 static void print_cfg_table(CfgTable_struct *tb)
2769 {
2770         int i;
2771         char temp_name[17];
2772
2773         printk("Controller Configuration information\n");
2774         printk("------------------------------------\n");
2775         for (i = 0; i < 4; i++)
2776                 temp_name[i] = readb(&(tb->Signature[i]));
2777         temp_name[4] = '\0';
2778         printk("   Signature = %s\n", temp_name);
2779         printk("   Spec Number = %d\n", readl(&(tb->SpecValence)));
2780         printk("   Transport methods supported = 0x%x\n",
2781                readl(&(tb->TransportSupport)));
2782         printk("   Transport methods active = 0x%x\n",
2783                readl(&(tb->TransportActive)));
2784         printk("   Requested transport Method = 0x%x\n",
2785                readl(&(tb->HostWrite.TransportRequest)));
2786         printk("   Coalesce Interrupt Delay = 0x%x\n",
2787                readl(&(tb->HostWrite.CoalIntDelay)));
2788         printk("   Coalesce Interrupt Count = 0x%x\n",
2789                readl(&(tb->HostWrite.CoalIntCount)));
2790         printk("   Max outstanding commands = 0x%d\n",
2791                readl(&(tb->CmdsOutMax)));
2792         printk("   Bus Types = 0x%x\n", readl(&(tb->BusTypes)));
2793         for (i = 0; i < 16; i++)
2794                 temp_name[i] = readb(&(tb->ServerName[i]));
2795         temp_name[16] = '\0';
2796         printk("   Server Name = %s\n", temp_name);
2797         printk("   Heartbeat Counter = 0x%x\n\n\n", readl(&(tb->HeartBeat)));
2798 }
2799 #endif                          /* CCISS_DEBUG */
2800
2801 static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
2802 {
2803         int i, offset, mem_type, bar_type;
2804         if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */
2805                 return 0;
2806         offset = 0;
2807         for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
2808                 bar_type = pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE;
2809                 if (bar_type == PCI_BASE_ADDRESS_SPACE_IO)
2810                         offset += 4;
2811                 else {
2812                         mem_type = pci_resource_flags(pdev, i) &
2813                             PCI_BASE_ADDRESS_MEM_TYPE_MASK;
2814                         switch (mem_type) {
2815                         case PCI_BASE_ADDRESS_MEM_TYPE_32:
2816                         case PCI_BASE_ADDRESS_MEM_TYPE_1M:
2817                                 offset += 4;    /* 32 bit */
2818                                 break;
2819                         case PCI_BASE_ADDRESS_MEM_TYPE_64:
2820                                 offset += 8;
2821                                 break;
2822                         default:        /* reserved in PCI 2.2 */
2823                                 printk(KERN_WARNING
2824                                        "Base address is invalid\n");
2825                                 return -1;
2826                                 break;
2827                         }
2828                 }
2829                 if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0)
2830                         return i + 1;
2831         }
2832         return -1;
2833 }
2834
2835 /* If MSI/MSI-X is supported by the kernel we will try to enable it on
2836  * controllers that are capable. If not, we use IO-APIC mode.
2837  */
2838
2839 static void __devinit cciss_interrupt_mode(ctlr_info_t *c,
2840                                            struct pci_dev *pdev, __u32 board_id)
2841 {
2842 #ifdef CONFIG_PCI_MSI
2843         int err;
2844         struct msix_entry cciss_msix_entries[4] = { {0, 0}, {0, 1},
2845         {0, 2}, {0, 3}
2846         };
2847
2848         /* Some boards advertise MSI but don't really support it */
2849         if ((board_id == 0x40700E11) ||
2850             (board_id == 0x40800E11) ||
2851             (board_id == 0x40820E11) || (board_id == 0x40830E11))
2852                 goto default_int_mode;
2853
2854         if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
2855                 err = pci_enable_msix(pdev, cciss_msix_entries, 4);
2856                 if (!err) {
2857                         c->intr[0] = cciss_msix_entries[0].vector;
2858                         c->intr[1] = cciss_msix_entries[1].vector;
2859                         c->intr[2] = cciss_msix_entries[2].vector;
2860                         c->intr[3] = cciss_msix_entries[3].vector;
2861                         c->msix_vector = 1;
2862                         return;
2863                 }
2864                 if (err > 0) {
2865                         printk(KERN_WARNING "cciss: only %d MSI-X vectors "
2866                                "available\n", err);
2867                         goto default_int_mode;
2868                 } else {
2869                         printk(KERN_WARNING "cciss: MSI-X init failed %d\n",
2870                                err);
2871                         goto default_int_mode;
2872                 }
2873         }
2874         if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) {
2875                 if (!pci_enable_msi(pdev)) {
2876                         c->msi_vector = 1;
2877                 } else {
2878                         printk(KERN_WARNING "cciss: MSI init failed\n");
2879                 }
2880         }
2881 default_int_mode:
2882 #endif                          /* CONFIG_PCI_MSI */
2883         /* if we get here we're going to use the default interrupt mode */
2884         c->intr[SIMPLE_MODE_INT] = pdev->irq;
2885         return;
2886 }
2887
2888 static int cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
2889 {
2890         ushort subsystem_vendor_id, subsystem_device_id, command;
2891         __u32 board_id, scratchpad = 0;
2892         __u64 cfg_offset;
2893         __u32 cfg_base_addr;
2894         __u64 cfg_base_addr_index;
2895         int i, err;
2896
2897         /* check to see if controller has been disabled */
2898         /* BEFORE trying to enable it */
2899         (void)pci_read_config_word(pdev, PCI_COMMAND, &command);
2900         if (!(command & 0x02)) {
2901                 printk(KERN_WARNING
2902                        "cciss: controller appears to be disabled\n");
2903                 return -ENODEV;
2904         }
2905
2906         err = pci_enable_device(pdev);
2907         if (err) {
2908                 printk(KERN_ERR "cciss: Unable to Enable PCI device\n");
2909                 return err;
2910         }
2911
2912         err = pci_request_regions(pdev, "cciss");
2913         if (err) {
2914                 printk(KERN_ERR "cciss: Cannot obtain PCI resources, "
2915                        "aborting\n");
2916                 return err;
2917         }
2918
2919         subsystem_vendor_id = pdev->subsystem_vendor;
2920         subsystem_device_id = pdev->subsystem_device;
2921         board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
2922                     subsystem_vendor_id);
2923
2924 #ifdef CCISS_DEBUG
2925         printk("command = %x\n", command);
2926         printk("irq = %x\n", pdev->irq);
2927         printk("board_id = %x\n", board_id);
2928 #endif                          /* CCISS_DEBUG */
2929
2930 /* If the kernel supports MSI/MSI-X we will try to enable that functionality,
2931  * else we use the IO-APIC interrupt assigned to us by system ROM.
2932  */
2933         cciss_interrupt_mode(c, pdev, board_id);
2934
2935         /*
2936          * Memory base addr is first addr , the second points to the config
2937          *   table
2938          */
2939
2940         c->paddr = pci_resource_start(pdev, 0); /* addressing mode bits already removed */
2941 #ifdef CCISS_DEBUG
2942         printk("address 0 = %x\n", c->paddr);
2943 #endif                          /* CCISS_DEBUG */
2944         c->vaddr = remap_pci_mem(c->paddr, 0x250);
2945
2946         /* Wait for the board to become ready.  (PCI hotplug needs this.)
2947          * We poll for up to 120 secs, once per 100ms. */
2948         for (i = 0; i < 1200; i++) {
2949                 scratchpad = readl(c->vaddr + SA5_SCRATCHPAD_OFFSET);
2950                 if (scratchpad == CCISS_FIRMWARE_READY)
2951                         break;
2952                 set_current_state(TASK_INTERRUPTIBLE);
2953                 schedule_timeout(HZ / 10);      /* wait 100ms */
2954         }
2955         if (scratchpad != CCISS_FIRMWARE_READY) {
2956                 printk(KERN_WARNING "cciss: Board not ready.  Timed out.\n");
2957                 err = -ENODEV;
2958                 goto err_out_free_res;
2959         }
2960
2961         /* get the address index number */
2962         cfg_base_addr = readl(c->vaddr + SA5_CTCFG_OFFSET);
2963         cfg_base_addr &= (__u32) 0x0000ffff;
2964 #ifdef CCISS_DEBUG
2965         printk("cfg base address = %x\n", cfg_base_addr);
2966 #endif                          /* CCISS_DEBUG */
2967         cfg_base_addr_index = find_PCI_BAR_index(pdev, cfg_base_addr);
2968 #ifdef CCISS_DEBUG
2969         printk("cfg base address index = %x\n", cfg_base_addr_index);
2970 #endif                          /* CCISS_DEBUG */
2971         if (cfg_base_addr_index == -1) {
2972                 printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n");
2973                 err = -ENODEV;
2974                 goto err_out_free_res;
2975         }
2976
2977         cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET);
2978 #ifdef CCISS_DEBUG
2979         printk("cfg offset = %x\n", cfg_offset);
2980 #endif                          /* CCISS_DEBUG */
2981         c->cfgtable = remap_pci_mem(pci_resource_start(pdev,
2982                                                        cfg_base_addr_index) +
2983                                     cfg_offset, sizeof(CfgTable_struct));
2984         c->board_id = board_id;
2985
2986 #ifdef CCISS_DEBUG
2987         print_cfg_table(c->cfgtable);
2988 #endif                          /* CCISS_DEBUG */
2989
2990         for (i = 0; i < ARRAY_SIZE(products); i++) {
2991                 if (board_id == products[i].board_id) {
2992                         c->product_name = products[i].product_name;
2993                         c->access = *(products[i].access);
2994                         c->nr_cmds = products[i].nr_cmds;
2995                         break;
2996                 }
2997         }
2998         if ((readb(&c->cfgtable->Signature[0]) != 'C') ||
2999             (readb(&c->cfgtable->Signature[1]) != 'I') ||
3000             (readb(&c->cfgtable->Signature[2]) != 'S') ||
3001             (readb(&c->cfgtable->Signature[3]) != 'S')) {
3002                 printk("Does not appear to be a valid CISS config table\n");
3003                 err = -ENODEV;
3004                 goto err_out_free_res;
3005         }
3006         /* We didn't find the controller in our list. We know the
3007          * signature is valid. If it's an HP device let's try to
3008          * bind to the device and fire it up. Otherwise we bail.
3009          */
3010         if (i == ARRAY_SIZE(products)) {
3011                 if (subsystem_vendor_id == PCI_VENDOR_ID_HP) {
3012                         c->product_name = products[i-1].product_name;
3013                         c->access = *(products[i-1].access);
3014                         c->nr_cmds = products[i-1].nr_cmds;
3015                         printk(KERN_WARNING "cciss: This is an unknown "
3016                                 "Smart Array controller.\n"
3017                                 "cciss: Please update to the latest driver "
3018                                 "available from www.hp.com.\n");
3019                 } else {
3020                         printk(KERN_WARNING "cciss: Sorry, I don't know how"
3021                                 " to access the Smart Array controller %08lx\n"
3022                                         , (unsigned long)board_id);
3023                         err = -ENODEV;
3024                         goto err_out_free_res;
3025                 }
3026         }
3027 #ifdef CONFIG_X86
3028         {
3029                 /* Need to enable prefetch in the SCSI core for 6400 in x86 */
3030                 __u32 prefetch;
3031                 prefetch = readl(&(c->cfgtable->SCSI_Prefetch));
3032                 prefetch |= 0x100;
3033                 writel(prefetch, &(c->cfgtable->SCSI_Prefetch));
3034         }
3035 #endif
3036
3037         /* Disabling DMA prefetch for the P600
3038          * An ASIC bug may result in a prefetch beyond
3039          * physical memory.
3040          */
3041         if(board_id == 0x3225103C) {
3042                 __u32 dma_prefetch;
3043                 dma_prefetch = readl(c->vaddr + I2O_DMA1_CFG);
3044                 dma_prefetch |= 0x8000;
3045                 writel(dma_prefetch, c->vaddr + I2O_DMA1_CFG);
3046         }
3047
3048 #ifdef CCISS_DEBUG
3049         printk("Trying to put board into Simple mode\n");
3050 #endif                          /* CCISS_DEBUG */
3051         c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
3052         /* Update the field, and then ring the doorbell */
3053         writel(CFGTBL_Trans_Simple, &(c->cfgtable->HostWrite.TransportRequest));
3054         writel(CFGTBL_ChangeReq, c->vaddr + SA5_DOORBELL);
3055
3056         /* under certain very rare conditions, this can take awhile.
3057          * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
3058          * as we enter this code.) */
3059         for (i = 0; i < MAX_CONFIG_WAIT; i++) {
3060                 if (!(readl(c->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
3061                         break;
3062                 /* delay and try again */
3063                 set_current_state(TASK_INTERRUPTIBLE);
3064                 schedule_timeout(10);
3065         }
3066
3067 #ifdef CCISS_DEBUG
3068         printk(KERN_DEBUG "I counter got to %d %x\n", i,
3069                readl(c->vaddr + SA5_DOORBELL));
3070 #endif                          /* CCISS_DEBUG */
3071 #ifdef CCISS_DEBUG
3072         print_cfg_table(c->cfgtable);
3073 #endif                          /* CCISS_DEBUG */
3074
3075         if (!(readl(&(c->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) {
3076                 printk(KERN_WARNING "cciss: unable to get board into"
3077                        " simple mode\n");
3078                 err = -ENODEV;
3079                 goto err_out_free_res;
3080         }
3081         return 0;
3082
3083 err_out_free_res:
3084         /*
3085          * Deliberately omit pci_disable_device(): it does something nasty to
3086          * Smart Array controllers that pci_enable_device does not undo
3087          */
3088         pci_release_regions(pdev);
3089         return err;
3090 }
3091
3092 /*
3093  * Gets information about the local volumes attached to the controller.
3094  */
3095 static void cciss_getgeometry(int cntl_num)
3096 {
3097         ReportLunData_struct *ld_buff;
3098         InquiryData_struct *inq_buff;
3099         int return_code;
3100         int i;
3101         int listlength = 0;
3102         __u32 lunid = 0;
3103         unsigned block_size;
3104         sector_t total_size;
3105
3106         ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
3107         if (ld_buff == NULL) {
3108                 printk(KERN_ERR "cciss: out of memory\n");
3109                 return;
3110         }
3111         inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
3112         if (inq_buff == NULL) {
3113                 printk(KERN_ERR "cciss: out of memory\n");
3114                 kfree(ld_buff);
3115                 return;
3116         }
3117         /* Get the firmware version */
3118         return_code = sendcmd(CISS_INQUIRY, cntl_num, inq_buff,
3119                               sizeof(InquiryData_struct), 0, 0, 0, NULL,
3120                               TYPE_CMD);
3121         if (return_code == IO_OK) {
3122                 hba[cntl_num]->firm_ver[0] = inq_buff->data_byte[32];
3123                 hba[cntl_num]->firm_ver[1] = inq_buff->data_byte[33];
3124                 hba[cntl_num]->firm_ver[2] = inq_buff->data_byte[34];
3125                 hba[cntl_num]->firm_ver[3] = inq_buff->data_byte[35];
3126         } else {                /* send command failed */
3127
3128                 printk(KERN_WARNING "cciss: unable to determine firmware"
3129                        " version of controller\n");
3130         }
3131         /* Get the number of logical volumes */
3132         return_code = sendcmd(CISS_REPORT_LOG, cntl_num, ld_buff,
3133                               sizeof(ReportLunData_struct), 0, 0, 0, NULL,
3134                               TYPE_CMD);
3135
3136         if (return_code == IO_OK) {
3137 #ifdef CCISS_DEBUG
3138                 printk("LUN Data\n--------------------------\n");
3139 #endif                          /* CCISS_DEBUG */
3140
3141                 listlength |=
3142                     (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24;
3143                 listlength |=
3144                     (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16;
3145                 listlength |=
3146                     (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8;
3147                 listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]);
3148         } else {                /* reading number of logical volumes failed */
3149
3150                 printk(KERN_WARNING "cciss: report logical volume"
3151                        " command failed\n");
3152                 listlength = 0;
3153         }
3154         hba[cntl_num]->num_luns = listlength / 8;       // 8 bytes pre entry
3155         if (hba[cntl_num]->num_luns > CISS_MAX_LUN) {
3156                 printk(KERN_ERR
3157                        "ciss:  only %d number of logical volumes supported\n",
3158                        CISS_MAX_LUN);
3159                 hba[cntl_num]->num_luns = CISS_MAX_LUN;
3160         }
3161 #ifdef CCISS_DEBUG
3162         printk(KERN_DEBUG "Length = %x %x %x %x = %d\n",
3163                ld_buff->LUNListLength[0], ld_buff->LUNListLength[1],
3164                ld_buff->LUNListLength[2], ld_buff->LUNListLength[3],
3165                hba[cntl_num]->num_luns);
3166 #endif                          /* CCISS_DEBUG */
3167
3168         hba[cntl_num]->highest_lun = hba[cntl_num]->num_luns - 1;
3169         for (i = 0; i < CISS_MAX_LUN; i++) {
3170                 if (i < hba[cntl_num]->num_luns) {
3171                         lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3]))
3172                             << 24;
3173                         lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2]))
3174                             << 16;
3175                         lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1]))
3176                             << 8;
3177                         lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
3178
3179                         hba[cntl_num]->drv[i].LunID = lunid;
3180
3181 #ifdef CCISS_DEBUG
3182                         printk(KERN_DEBUG "LUN[%d]:  %x %x %x %x = %x\n", i,
3183                                ld_buff->LUN[i][0], ld_buff->LUN[i][1],
3184                                ld_buff->LUN[i][2], ld_buff->LUN[i][3],
3185                                hba[cntl_num]->drv[i].LunID);
3186 #endif                          /* CCISS_DEBUG */
3187
3188                 /* testing to see if 16-byte CDBs are already being used */
3189                 if(hba[cntl_num]->cciss_read == CCISS_READ_16) {
3190                         cciss_read_capacity_16(cntl_num, i, 0,
3191                                             &total_size, &block_size);
3192                         goto geo_inq;
3193                 }
3194                 cciss_read_capacity(cntl_num, i, 0, &total_size, &block_size);
3195
3196                 /* If read_capacity returns all F's the logical is >2TB */
3197                 /* so we switch to 16-byte CDBs for all read/write ops */
3198                 if(total_size == 0xFFFFFFFFULL) {
3199                         cciss_read_capacity_16(cntl_num, i, 0,
3200                         &total_size, &block_size);
3201                         hba[cntl_num]->cciss_read = CCISS_READ_16;
3202                         hba[cntl_num]->cciss_write = CCISS_WRITE_16;
3203                 } else {
3204                         hba[cntl_num]->cciss_read = CCISS_READ_10;
3205                         hba[cntl_num]->cciss_write = CCISS_WRITE_10;
3206                 }
3207 geo_inq:
3208                         cciss_geometry_inquiry(cntl_num, i, 0, total_size,
3209                                                block_size, inq_buff,
3210                                                &hba[cntl_num]->drv[i]);
3211                 } else {
3212                         /* initialize raid_level to indicate a free space */
3213                         hba[cntl_num]->drv[i].raid_level = -1;
3214                 }
3215         }
3216         kfree(ld_buff);
3217         kfree(inq_buff);
3218 }
3219
3220 /* Function to find the first free pointer into our hba[] array */
3221 /* Returns -1 if no free entries are left.  */
3222 static int alloc_cciss_hba(void)
3223 {
3224         int i;
3225
3226         for (i = 0; i < MAX_CTLR; i++) {
3227                 if (!hba[i]) {
3228                         ctlr_info_t *p;
3229
3230                         p = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL);
3231                         if (!p)
3232                                 goto Enomem;
3233                         p->gendisk[0] = alloc_disk(1 << NWD_SHIFT);
3234                         if (!p->gendisk[0]) {
3235                                 kfree(p);
3236                                 goto Enomem;
3237                         }
3238                         hba[i] = p;
3239                         return i;
3240                 }
3241         }
3242         printk(KERN_WARNING "cciss: This driver supports a maximum"
3243                " of %d controllers.\n", MAX_CTLR);
3244         return -1;
3245 Enomem:
3246         printk(KERN_ERR "cciss: out of memory.\n");
3247         return -1;
3248 }
3249
3250 static void free_hba(int i)
3251 {
3252         ctlr_info_t *p = hba[i];
3253         int n;
3254
3255         hba[i] = NULL;
3256         for (n = 0; n < CISS_MAX_LUN; n++)
3257                 put_disk(p->gendisk[n]);
3258         kfree(p);
3259 }
3260
3261 /*
3262  *  This is it.  Find all the controllers and register them.  I really hate
3263  *  stealing all these major device numbers.
3264  *  returns the number of block devices registered.
3265  */
3266 static int __devinit cciss_init_one(struct pci_dev *pdev,
3267                                     const struct pci_device_id *ent)
3268 {
3269         int i;
3270         int j = 0;
3271         int rc;
3272         int dac;
3273
3274         i = alloc_cciss_hba();
3275         if (i < 0)
3276                 return -1;
3277
3278         hba[i]->busy_initializing = 1;
3279
3280         if (cciss_pci_init(hba[i], pdev) != 0)
3281                 goto clean1;
3282
3283         sprintf(hba[i]->devname, "cciss%d", i);
3284         hba[i]->ctlr = i;
3285         hba[i]->pdev = pdev;
3286
3287         /* configure PCI DMA stuff */
3288         if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK))
3289                 dac = 1;
3290         else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK))
3291                 dac = 0;
3292         else {
3293                 printk(KERN_ERR "cciss: no suitable DMA available\n");
3294                 goto clean1;
3295         }
3296
3297         /*
3298          * register with the major number, or get a dynamic major number
3299          * by passing 0 as argument.  This is done for greater than
3300          * 8 controller support.
3301          */
3302         if (i < MAX_CTLR_ORIG)
3303                 hba[i]->major = COMPAQ_CISS_MAJOR + i;
3304         rc = register_blkdev(hba[i]->major, hba[i]->devname);
3305         if (rc == -EBUSY || rc == -EINVAL) {
3306                 printk(KERN_ERR
3307                        "cciss:  Unable to get major number %d for %s "
3308                        "on hba %d\n", hba[i]->major, hba[i]->devname, i);
3309                 goto clean1;
3310         } else {
3311                 if (i >= MAX_CTLR_ORIG)
3312                         hba[i]->major = rc;
3313         }
3314
3315         /* make sure the board interrupts are off */
3316         hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_OFF);
3317         if (request_irq(hba[i]->intr[SIMPLE_MODE_INT], do_cciss_intr,
3318                         IRQF_DISABLED | IRQF_SHARED, hba[i]->devname, hba[i])) {
3319                 printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
3320                        hba[i]->intr[SIMPLE_MODE_INT], hba[i]->devname);
3321                 goto clean2;
3322         }
3323
3324         printk(KERN_INFO "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
3325                hba[i]->devname, pdev->device, pci_name(pdev),
3326                hba[i]->intr[SIMPLE_MODE_INT], dac ? "" : " not");
3327
3328         hba[i]->cmd_pool_bits =
3329             kmalloc(((hba[i]->nr_cmds + BITS_PER_LONG -
3330                       1) / BITS_PER_LONG) * sizeof(unsigned long), GFP_KERNEL);
3331         hba[i]->cmd_pool = (CommandList_struct *)
3332             pci_alloc_consistent(hba[i]->pdev,
3333                     hba[i]->nr_cmds * sizeof(CommandList_struct),
3334                     &(hba[i]->cmd_pool_dhandle));
3335         hba[i]->errinfo_pool = (ErrorInfo_struct *)
3336             pci_alloc_consistent(hba[i]->pdev,
3337                     hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
3338                     &(hba[i]->errinfo_pool_dhandle));
3339         if ((hba[i]->cmd_pool_bits == NULL)
3340             || (hba[i]->cmd_pool == NULL)
3341             || (hba[i]->errinfo_pool == NULL)) {
3342                 printk(KERN_ERR "cciss: out of memory");
3343                 goto clean4;
3344         }
3345 #ifdef CONFIG_CISS_SCSI_TAPE
3346         hba[i]->scsi_rejects.complete =
3347             kmalloc(sizeof(hba[i]->scsi_rejects.complete[0]) *
3348                     (hba[i]->nr_cmds + 5), GFP_KERNEL);
3349         if (hba[i]->scsi_rejects.complete == NULL) {
3350                 printk(KERN_ERR "cciss: out of memory");
3351                 goto clean4;
3352         }
3353 #endif
3354         spin_lock_init(&hba[i]->lock);
3355
3356         /* Initialize the pdev driver private data.
3357            have it point to hba[i].  */
3358         pci_set_drvdata(pdev, hba[i]);
3359         /* command and error info recs zeroed out before
3360            they are used */
3361         memset(hba[i]->cmd_pool_bits, 0,
3362                ((hba[i]->nr_cmds + BITS_PER_LONG -
3363                  1) / BITS_PER_LONG) * sizeof(unsigned long));
3364
3365 #ifdef CCISS_DEBUG
3366         printk(KERN_DEBUG "Scanning for drives on controller cciss%d\n", i);
3367 #endif                          /* CCISS_DEBUG */
3368
3369         cciss_getgeometry(i);
3370
3371         cciss_scsi_setup(i);
3372
3373         /* Turn the interrupts on so we can service requests */
3374         hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON);
3375
3376         cciss_procinit(i);
3377
3378         hba[i]->cciss_max_sectors = 2048;
3379
3380         hba[i]->busy_initializing = 0;
3381
3382         do {
3383                 drive_info_struct *drv = &(hba[i]->drv[j]);
3384                 struct gendisk *disk = hba[i]->gendisk[j];
3385                 struct request_queue *q;
3386
3387                 /* Check if the disk was allocated already */
3388                 if (!disk){
3389                         hba[i]->gendisk[j] = alloc_disk(1 << NWD_SHIFT);
3390                         disk = hba[i]->gendisk[j];
3391                 }
3392
3393                 /* Check that the disk was able to be allocated */
3394                 if (!disk) {
3395                         printk(KERN_ERR "cciss: unable to allocate memory for disk %d\n", j);
3396                         goto clean4;
3397                 }
3398
3399                 q = blk_init_queue(do_cciss_request, &hba[i]->lock);
3400                 if (!q) {
3401                         printk(KERN_ERR
3402                                "cciss:  unable to allocate queue for disk %d\n",
3403                                j);
3404                         goto clean4;
3405                 }
3406                 drv->queue = q;
3407
3408                 q->backing_dev_info.ra_pages = READ_AHEAD;
3409                 blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
3410
3411                 /* This is a hardware imposed limit. */
3412                 blk_queue_max_hw_segments(q, MAXSGENTRIES);
3413
3414                 /* This is a limit in the driver and could be eliminated. */
3415                 blk_queue_max_phys_segments(q, MAXSGENTRIES);
3416
3417                 blk_queue_max_sectors(q, hba[i]->cciss_max_sectors);
3418
3419                 blk_queue_softirq_done(q, cciss_softirq_done);
3420
3421                 q->queuedata = hba[i];
3422                 sprintf(disk->disk_name, "cciss/c%dd%d", i, j);
3423                 disk->major = hba[i]->major;
3424                 disk->first_minor = j << NWD_SHIFT;
3425                 disk->fops = &cciss_fops;
3426                 disk->queue = q;
3427                 disk->private_data = drv;
3428                 disk->driverfs_dev = &pdev->dev;
3429                 /* we must register the controller even if no disks exist */
3430                 /* this is for the online array utilities */
3431                 if (!drv->heads && j)
3432                         continue;
3433                 blk_queue_hardsect_size(q, drv->block_size);
3434                 set_capacity(disk, drv->nr_blocks);
3435                 add_disk(disk);
3436                 j++;
3437         } while (j <= hba[i]->highest_lun);
3438
3439         return 1;
3440
3441       clean4:
3442 #ifdef CONFIG_CISS_SCSI_TAPE
3443         kfree(hba[i]->scsi_rejects.complete);
3444 #endif
3445         kfree(hba[i]->cmd_pool_bits);
3446         if (hba[i]->cmd_pool)
3447                 pci_free_consistent(hba[i]->pdev,
3448                                     hba[i]->nr_cmds * sizeof(CommandList_struct),
3449                                     hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
3450         if (hba[i]->errinfo_pool)
3451                 pci_free_consistent(hba[i]->pdev,
3452                                     hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
3453                                     hba[i]->errinfo_pool,
3454                                     hba[i]->errinfo_pool_dhandle);
3455         free_irq(hba[i]->intr[SIMPLE_MODE_INT], hba[i]);
3456       clean2:
3457         unregister_blkdev(hba[i]->major, hba[i]->devname);
3458       clean1:
3459         hba[i]->busy_initializing = 0;
3460         /* cleanup any queues that may have been initialized */
3461         for (j=0; j <= hba[i]->highest_lun; j++){
3462                 drive_info_struct *drv = &(hba[i]->drv[j]);
3463                 if (drv->queue)
3464                         blk_cleanup_queue(drv->queue);
3465         }
3466         /*
3467          * Deliberately omit pci_disable_device(): it does something nasty to
3468          * Smart Array controllers that pci_enable_device does not undo
3469          */
3470         pci_release_regions(pdev);
3471         pci_set_drvdata(pdev, NULL);
3472         free_hba(i);
3473         return -1;
3474 }
3475
3476 static void cciss_shutdown(struct pci_dev *pdev)
3477 {
3478         ctlr_info_t *tmp_ptr;
3479         int i;
3480         char flush_buf[4];
3481         int return_code;
3482
3483         tmp_ptr = pci_get_drvdata(pdev);
3484         if (tmp_ptr == NULL)
3485                 return;
3486         i = tmp_ptr->ctlr;
3487         if (hba[i] == NULL)
3488                 return;
3489
3490         /* Turn board interrupts off  and send the flush cache command */
3491         /* sendcmd will turn off interrupt, and send the flush...
3492          * To write all data in the battery backed cache to disks */
3493         memset(flush_buf, 0, 4);
3494         return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0, 0, 0, NULL,
3495                               TYPE_CMD);
3496         if (return_code == IO_OK) {
3497                 printk(KERN_INFO "Completed flushing cache on controller %d\n", i);
3498         } else {
3499                 printk(KERN_WARNING "Error flushing cache on controller %d\n", i);
3500         }
3501         free_irq(hba[i]->intr[2], hba[i]);
3502 }
3503
3504 static void __devexit cciss_remove_one(struct pci_dev *pdev)
3505 {
3506         ctlr_info_t *tmp_ptr;
3507         int i, j;
3508
3509         if (pci_get_drvdata(pdev) == NULL) {
3510                 printk(KERN_ERR "cciss: Unable to remove device \n");
3511                 return;
3512         }
3513         tmp_ptr = pci_get_drvdata(pdev);
3514         i = tmp_ptr->ctlr;
3515         if (hba[i] == NULL) {
3516                 printk(KERN_ERR "cciss: device appears to "
3517                        "already be removed \n");
3518                 return;
3519         }
3520
3521         remove_proc_entry(hba[i]->devname, proc_cciss);
3522         unregister_blkdev(hba[i]->major, hba[i]->devname);
3523
3524         /* remove it from the disk list */
3525         for (j = 0; j < CISS_MAX_LUN; j++) {
3526                 struct gendisk *disk = hba[i]->gendisk[j];
3527                 if (disk) {
3528                         struct request_queue *q = disk->queue;
3529
3530                         if (disk->flags & GENHD_FL_UP)
3531                                 del_gendisk(disk);
3532                         if (q)
3533                                 blk_cleanup_queue(q);
3534                 }
3535         }
3536
3537         cciss_unregister_scsi(i);       /* unhook from SCSI subsystem */
3538
3539         cciss_shutdown(pdev);
3540
3541 #ifdef CONFIG_PCI_MSI
3542         if (hba[i]->msix_vector)
3543                 pci_disable_msix(hba[i]->pdev);
3544         else if (hba[i]->msi_vector)
3545                 pci_disable_msi(hba[i]->pdev);
3546 #endif                          /* CONFIG_PCI_MSI */
3547
3548         iounmap(hba[i]->vaddr);
3549
3550         pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(CommandList_struct),
3551                             hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
3552         pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
3553                             hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle);
3554         kfree(hba[i]->cmd_pool_bits);
3555 #ifdef CONFIG_CISS_SCSI_TAPE
3556         kfree(hba[i]->scsi_rejects.complete);
3557 #endif
3558         /*
3559          * Deliberately omit pci_disable_device(): it does something nasty to
3560          * Smart Array controllers that pci_enable_device does not undo
3561          */
3562         pci_release_regions(pdev);
3563         pci_set_drvdata(pdev, NULL);
3564         free_hba(i);
3565 }
3566
3567 static struct pci_driver cciss_pci_driver = {
3568         .name = "cciss",
3569         .probe = cciss_init_one,
3570         .remove = __devexit_p(cciss_remove_one),
3571         .id_table = cciss_pci_device_id,        /* id_table */
3572         .shutdown = cciss_shutdown,
3573 };
3574
3575 /*
3576  *  This is it.  Register the PCI driver information for the cards we control
3577  *  the OS will call our registered routines when it finds one of our cards.
3578  */
3579 static int __init cciss_init(void)
3580 {
3581         printk(KERN_INFO DRIVER_NAME "\n");
3582
3583         /* Register for our PCI devices */
3584         return pci_register_driver(&cciss_pci_driver);
3585 }
3586
3587 static void __exit cciss_cleanup(void)
3588 {
3589         int i;
3590
3591         pci_unregister_driver(&cciss_pci_driver);
3592         /* double check that all controller entrys have been removed */
3593         for (i = 0; i < MAX_CTLR; i++) {
3594                 if (hba[i] != NULL) {
3595                         printk(KERN_WARNING "cciss: had to remove"
3596                                " controller %d\n", i);
3597                         cciss_remove_one(hba[i]->pdev);
3598                 }
3599         }
3600         remove_proc_entry("cciss", proc_root_driver);
3601 }
3602
3603 static void fail_all_cmds(unsigned long ctlr)
3604 {
3605         /* If we get here, the board is apparently dead. */
3606         ctlr_info_t *h = hba[ctlr];
3607         CommandList_struct *c;
3608         unsigned long flags;
3609
3610         printk(KERN_WARNING "cciss%d: controller not responding.\n", h->ctlr);
3611         h->alive = 0;           /* the controller apparently died... */
3612
3613         spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
3614
3615         pci_disable_device(h->pdev);    /* Make sure it is really dead. */
3616
3617         /* move everything off the request queue onto the completed queue */
3618         while ((c = h->reqQ) != NULL) {
3619                 removeQ(&(h->reqQ), c);
3620                 h->Qdepth--;
3621                 addQ(&(h->cmpQ), c);
3622         }
3623
3624         /* Now, fail everything on the completed queue with a HW error */
3625         while ((c = h->cmpQ) != NULL) {
3626                 removeQ(&h->cmpQ, c);
3627                 c->err_info->CommandStatus = CMD_HARDWARE_ERR;
3628                 if (c->cmd_type == CMD_RWREQ) {
3629                         complete_command(h, c, 0);
3630                 } else if (c->cmd_type == CMD_IOCTL_PEND)
3631                         complete(c->waiting);
3632 #ifdef CONFIG_CISS_SCSI_TAPE
3633                 else if (c->cmd_type == CMD_SCSI)
3634                         complete_scsi_command(c, 0, 0);
3635 #endif
3636         }
3637         spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
3638         return;
3639 }
3640
3641 module_init(cciss_init);
3642 module_exit(cciss_cleanup);