[libata] pata_cs5536: new API build fix
[pandora-kernel.git] / drivers / ata / pata_cs5536.c
1 /*
2  * pata_cs5536.c        - CS5536 PATA for new ATA layer
3  *                        (C) 2007 Martin K. Petersen <mkp@mkp.net>
4  *
5  * This program is free software; you can redistribute it and/or modify
6  * it under the terms of the GNU General Public License version 2 as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12  * GNU General Public License for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program; if not, write to the Free Software
16  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
17  *
18  * Documentation:
19  *      Available from AMD web site.
20  *
21  * The IDE timing registers for the CS5536 live in the Geode Machine
22  * Specific Register file and not PCI config space.  Most BIOSes
23  * virtualize the PCI registers so the chip looks like a standard IDE
24  * controller.  Unfortunately not all implementations get this right.
25  * In particular some have problems with unaligned accesses to the
26  * virtualized PCI registers.  This driver always does full dword
27  * writes to work around the issue.  Also, in case of a bad BIOS this
28  * driver can be loaded with the "msr=1" parameter which forces using
29  * the Machine Specific Registers to configure the device.
30  */
31
32 #include <linux/kernel.h>
33 #include <linux/module.h>
34 #include <linux/pci.h>
35 #include <linux/init.h>
36 #include <linux/blkdev.h>
37 #include <linux/delay.h>
38 #include <linux/libata.h>
39 #include <scsi/scsi_host.h>
40 #include <asm/msr.h>
41
42 #define DRV_NAME        "pata_cs5536"
43 #define DRV_VERSION     "0.0.5"
44
45 enum {
46         CFG                     = 0,
47         DTC                     = 1,
48         CAST                    = 2,
49         ETC                     = 3,
50
51         MSR_IDE_BASE            = 0x51300000,
52         MSR_IDE_CFG             = (MSR_IDE_BASE + 0x10),
53         MSR_IDE_DTC             = (MSR_IDE_BASE + 0x12),
54         MSR_IDE_CAST            = (MSR_IDE_BASE + 0x13),
55         MSR_IDE_ETC             = (MSR_IDE_BASE + 0x14),
56
57         PCI_IDE_CFG             = 0x40,
58         PCI_IDE_DTC             = 0x48,
59         PCI_IDE_CAST            = 0x4c,
60         PCI_IDE_ETC             = 0x50,
61
62         IDE_CFG_CHANEN          = 0x2,
63         IDE_CFG_CABLE           = 0x10000,
64
65         IDE_D0_SHIFT            = 24,
66         IDE_D1_SHIFT            = 16,
67         IDE_DRV_MASK            = 0xff,
68
69         IDE_CAST_D0_SHIFT       = 6,
70         IDE_CAST_D1_SHIFT       = 4,
71         IDE_CAST_DRV_MASK       = 0x3,
72         IDE_CAST_CMD_MASK       = 0xff,
73         IDE_CAST_CMD_SHIFT      = 24,
74
75         IDE_ETC_NODMA           = 0x03,
76 };
77
78 static int use_msr;
79
80 static const u32 msr_reg[4] = {
81         MSR_IDE_CFG, MSR_IDE_DTC, MSR_IDE_CAST, MSR_IDE_ETC,
82 };
83
84 static const u8 pci_reg[4] = {
85         PCI_IDE_CFG, PCI_IDE_DTC, PCI_IDE_CAST, PCI_IDE_ETC,
86 };
87
88 static inline int cs5536_read(struct pci_dev *pdev, int reg, int *val)
89 {
90         if (unlikely(use_msr)) {
91                 u32 dummy;
92
93                 rdmsr(msr_reg[reg], *val, dummy);
94                 return 0;
95         }
96
97         return pci_read_config_dword(pdev, pci_reg[reg], val);
98 }
99
100 static inline int cs5536_write(struct pci_dev *pdev, int reg, int val)
101 {
102         if (unlikely(use_msr)) {
103                 wrmsr(msr_reg[reg], val, 0);
104                 return 0;
105         }
106
107         return pci_write_config_dword(pdev, pci_reg[reg], val);
108 }
109
110 /**
111  *      cs5536_cable_detect     -       detect cable type
112  *      @ap: Port to detect on
113  *      @deadline: deadline jiffies for the operation
114  *
115  *      Perform cable detection for ATA66 capable cable. Return a libata
116  *      cable type.
117  */
118
119 static int cs5536_cable_detect(struct ata_port *ap)
120 {
121         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
122         u32 cfg;
123
124         cs5536_read(pdev, CFG, &cfg);
125
126         if (cfg & (IDE_CFG_CABLE << ap->port_no))
127                 return ATA_CBL_PATA80;
128         else
129                 return ATA_CBL_PATA40;
130 }
131
132 /**
133  *      cs5536_set_piomode              -       PIO setup
134  *      @ap: ATA interface
135  *      @adev: device on the interface
136  */
137
138 static void cs5536_set_piomode(struct ata_port *ap, struct ata_device *adev)
139 {
140         static const u8 drv_timings[5] = {
141                 0x98, 0x55, 0x32, 0x21, 0x20,
142         };
143
144         static const u8 addr_timings[5] = {
145                 0x2, 0x1, 0x0, 0x0, 0x0,
146         };
147
148         static const u8 cmd_timings[5] = {
149                 0x99, 0x92, 0x90, 0x22, 0x20,
150         };
151
152         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
153         struct ata_device *pair = ata_dev_pair(adev);
154         int mode = adev->pio_mode - XFER_PIO_0;
155         int cmdmode = mode;
156         int dshift = ap->port_no ? IDE_D1_SHIFT : IDE_D0_SHIFT;
157         int cshift = ap->port_no ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
158         u32 dtc, cast, etc;
159
160         if (pair)
161                 cmdmode = min(mode, pair->pio_mode - XFER_PIO_0);
162
163         cs5536_read(pdev, DTC, &dtc);
164         cs5536_read(pdev, CAST, &cast);
165         cs5536_read(pdev, ETC, &etc);
166
167         dtc &= ~(IDE_DRV_MASK << dshift);
168         dtc |= drv_timings[mode] << dshift;
169
170         cast &= ~(IDE_CAST_DRV_MASK << cshift);
171         cast |= addr_timings[mode] << cshift;
172
173         cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
174         cast |= cmd_timings[cmdmode] << IDE_CAST_CMD_SHIFT;
175
176         etc &= ~(IDE_DRV_MASK << dshift);
177         etc |= IDE_ETC_NODMA << dshift;
178
179         cs5536_write(pdev, DTC, dtc);
180         cs5536_write(pdev, CAST, cast);
181         cs5536_write(pdev, ETC, etc);
182 }
183
184 /**
185  *      cs5536_set_dmamode              -       DMA timing setup
186  *      @ap: ATA interface
187  *      @adev: Device being configured
188  *
189  */
190
191 static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev)
192 {
193         static const u8 udma_timings[6] = {
194                 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
195         };
196
197         static const u8 mwdma_timings[3] = {
198                 0x67, 0x21, 0x20,
199         };
200
201         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
202         u32 dtc, etc;
203         int mode = adev->dma_mode;
204         int dshift = ap->port_no ? IDE_D1_SHIFT : IDE_D0_SHIFT;
205
206         if (mode >= XFER_UDMA_0) {
207                 cs5536_read(pdev, ETC, &etc);
208
209                 etc &= ~(IDE_DRV_MASK << dshift);
210                 etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
211
212                 cs5536_write(pdev, ETC, etc);
213         } else { /* MWDMA */
214                 cs5536_read(pdev, DTC, &dtc);
215
216                 dtc &= ~(IDE_DRV_MASK << dshift);
217                 dtc |= mwdma_timings[mode] << dshift;
218
219                 cs5536_write(pdev, DTC, dtc);
220         }
221 }
222
223 static struct scsi_host_template cs5536_sht = {
224         .module                 = THIS_MODULE,
225         .name                   = DRV_NAME,
226         .ioctl                  = ata_scsi_ioctl,
227         .queuecommand           = ata_scsi_queuecmd,
228         .can_queue              = ATA_DEF_QUEUE,
229         .this_id                = ATA_SHT_THIS_ID,
230         .sg_tablesize           = LIBATA_MAX_PRD,
231         .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
232         .emulated               = ATA_SHT_EMULATED,
233         .use_clustering         = ATA_SHT_USE_CLUSTERING,
234         .proc_name              = DRV_NAME,
235         .dma_boundary           = ATA_DMA_BOUNDARY,
236         .slave_configure        = ata_scsi_slave_config,
237         .slave_destroy          = ata_scsi_slave_destroy,
238         .bios_param             = ata_std_bios_param,
239 };
240
241 static struct ata_port_operations cs5536_port_ops = {
242         .set_piomode            = cs5536_set_piomode,
243         .set_dmamode            = cs5536_set_dmamode,
244         .mode_filter            = ata_pci_default_filter,
245
246         .tf_load                = ata_tf_load,
247         .tf_read                = ata_tf_read,
248         .check_status           = ata_check_status,
249         .exec_command           = ata_exec_command,
250         .dev_select             = ata_std_dev_select,
251
252         .freeze                 = ata_bmdma_freeze,
253         .thaw                   = ata_bmdma_thaw,
254         .error_handler          = ata_bmdma_error_handler,
255         .post_internal_cmd      = ata_bmdma_post_internal_cmd,
256         .cable_detect           = cs5536_cable_detect,
257
258         .bmdma_setup            = ata_bmdma_setup,
259         .bmdma_start            = ata_bmdma_start,
260         .bmdma_stop             = ata_bmdma_stop,
261         .bmdma_status           = ata_bmdma_status,
262
263         .qc_prep                = ata_qc_prep,
264         .qc_issue               = ata_qc_issue_prot,
265
266         .data_xfer              = ata_data_xfer,
267
268         .irq_handler            = ata_interrupt,
269         .irq_clear              = ata_bmdma_irq_clear,
270         .irq_on                 = ata_irq_on,
271
272         .port_start             = ata_port_start,
273 };
274
275 /**
276  *      cs5536_init_one
277  *      @dev: PCI device
278  *      @id: Entry in match table
279  *
280  */
281
282 static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
283 {
284         static const struct ata_port_info info = {
285                 .sht = &cs5536_sht,
286                 .flags = ATA_FLAG_SLAVE_POSS,
287                 .pio_mask = 0x1f,
288                 .mwdma_mask = 0x07,
289                 .udma_mask = ATA_UDMA5,
290                 .port_ops = &cs5536_port_ops,
291         };
292
293         const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
294         u32 cfg;
295
296         if (use_msr)
297                 printk(KERN_ERR DRV_NAME ": Using MSR regs instead of PCI\n");
298
299         cs5536_read(dev, CFG, &cfg);
300
301         if ((cfg & IDE_CFG_CHANEN) == 0) {
302                 printk(KERN_ERR DRV_NAME ": disabled by BIOS\n");
303                 return -ENODEV;
304         }
305
306         return ata_pci_init_one(dev, ppi);
307 }
308
309 static const struct pci_device_id cs5536[] = {
310         { PCI_VDEVICE(AMD,      PCI_DEVICE_ID_AMD_CS5536_IDE), },
311         { },
312 };
313
314 static struct pci_driver cs5536_pci_driver = {
315         .name           = DRV_NAME,
316         .id_table       = cs5536,
317         .probe          = cs5536_init_one,
318         .remove         = ata_pci_remove_one,
319 #ifdef CONFIG_PM
320         .suspend        = ata_pci_device_suspend,
321         .resume         = ata_pci_device_resume,
322 #endif
323 };
324
325 static int __init cs5536_init(void)
326 {
327         return pci_register_driver(&cs5536_pci_driver);
328 }
329
330 static void __exit cs5536_exit(void)
331 {
332         pci_unregister_driver(&cs5536_pci_driver);
333 }
334
335 MODULE_AUTHOR("Martin K. Petersen");
336 MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
337 MODULE_LICENSE("GPL");
338 MODULE_DEVICE_TABLE(pci, cs5536);
339 MODULE_VERSION(DRV_VERSION);
340 module_param_named(msr, use_msr, int, 0644);
341 MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
342
343 module_init(cs5536_init);
344 module_exit(cs5536_exit);