drivers/acpi/executer/exoparg2.c

   1 /******************************************************************************
   2  *
   3  * Module Name: exoparg2 - AML execution - opcodes with 2 arguments
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2005, R. Byron Moore
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44
  45 #include <acpi/acpi.h>
  46 #include <acpi/acparser.h>
  47 #include <acpi/acinterp.h>
  48 #include <acpi/acevents.h>
  49 #include <acpi/amlcode.h>
  50
  51
  52 #define _COMPONENT          ACPI_EXECUTER
  53          ACPI_MODULE_NAME    ("exoparg2")
  54
  55
  56 /*!
  57  * Naming convention for AML interpreter execution routines.
  58  *
  59  * The routines that begin execution of AML opcodes are named with a common
  60  * convention based upon the number of arguments, the number of target operands,
  61  * and whether or not a value is returned:
  62  *
  63  *      AcpiExOpcode_xA_yT_zR
  64  *
  65  * Where:
  66  *
  67  * xA - ARGUMENTS:    The number of arguments (input operands) that are
  68  *                    required for this opcode type (1 through 6 args).
  69  * yT - TARGETS:      The number of targets (output operands) that are required
  70  *                    for this opcode type (0, 1, or 2 targets).
  71  * zR - RETURN VALUE: Indicates whether this opcode type returns a value
  72  *                    as the function return (0 or 1).
  73  *
  74  * The AcpiExOpcode* functions are called via the Dispatcher component with
  75  * fully resolved operands.
  76 !*/
  77
  78
  79 /*******************************************************************************
  80  *
  81  * FUNCTION:    acpi_ex_opcode_2A_0T_0R
  82  *
  83  * PARAMETERS:  walk_state          - Current walk state
  84  *
  85  * RETURN:      Status
  86  *
  87  * DESCRIPTION: Execute opcode with two arguments, no target, and no return
  88  *              value.
  89  *
  90  * ALLOCATION:  Deletes both operands
  91  *
  92  ******************************************************************************/
  93
  94 acpi_status
  95 acpi_ex_opcode_2A_0T_0R (
  96         struct acpi_walk_state          *walk_state)
  97 {
  98         union acpi_operand_object       **operand = &walk_state->operands[0];
  99         struct acpi_namespace_node      *node;
 100         u32                             value;
 101         acpi_status                     status = AE_OK;
 102
 103
 104         ACPI_FUNCTION_TRACE_STR ("ex_opcode_2A_0T_0R",
 105                         acpi_ps_get_opcode_name (walk_state->opcode));
 106
 107
 108         /* Examine the opcode */
 109
 110         switch (walk_state->opcode) {
 111         case AML_NOTIFY_OP:         /* Notify (notify_object, notify_value) */
 112
 113                 /* The first operand is a namespace node */
 114
 115                 node = (struct acpi_namespace_node *) operand[0];
 116
 117                 /* Second value is the notify value */
 118
 119                 value = (u32) operand[1]->integer.value;
 120
 121                 /* Are notifies allowed on this object? */
 122
 123                 if (!acpi_ev_is_notify_object (node)) {
 124                         ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 125                                         "Unexpected notify object type [%s]\n",
 126                                         acpi_ut_get_type_name (node->type)));
 127
 128                         status = AE_AML_OPERAND_TYPE;
 129                         break;
 130                 }
 131
 132 #ifdef ACPI_GPE_NOTIFY_CHECK
 133                 /*
 134                  * GPE method wake/notify check.  Here, we want to ensure that we
 135                  * don't receive any "device_wake" Notifies from a GPE _Lxx or _Exx
 136                  * GPE method during system runtime.  If we do, the GPE is marked
 137                  * as "wake-only" and disabled.
 138                  *
 139                  * 1) Is the Notify() value == device_wake?
 140                  * 2) Is this a GPE deferred method?  (An _Lxx or _Exx method)
 141                  * 3) Did the original GPE happen at system runtime?
 142                  *    (versus during wake)
 143                  *
 144                  * If all three cases are true, this is a wake-only GPE that should
 145                  * be disabled at runtime.
 146                  */
 147                 if (value == 2)     /* device_wake */ {
 148                         status = acpi_ev_check_for_wake_only_gpe (walk_state->gpe_event_info);
 149                         if (ACPI_FAILURE (status)) {
 150                                 /* AE_WAKE_ONLY_GPE only error, means ignore this notify */
 151
 152                                 return_ACPI_STATUS (AE_OK)
 153                         }
 154                 }
 155 #endif
 156
 157                 /*
 158                  * Dispatch the notify to the appropriate handler
 159                  * NOTE: the request is queued for execution after this method
 160                  * completes.  The notify handlers are NOT invoked synchronously
 161                  * from this thread -- because handlers may in turn run other
 162                  * control methods.
 163                  */
 164                 status = acpi_ev_queue_notify_request (node, value);
 165                 break;
 166
 167
 168         default:
 169
 170                 ACPI_REPORT_ERROR (("acpi_ex_opcode_2A_0T_0R: Unknown opcode %X\n",
 171                                 walk_state->opcode));
 172                 status = AE_AML_BAD_OPCODE;
 173         }
 174
 175         return_ACPI_STATUS (status);
 176 }
 177
 178
 179 /*******************************************************************************
 180  *
 181  * FUNCTION:    acpi_ex_opcode_2A_2T_1R
 182  *
 183  * PARAMETERS:  walk_state          - Current walk state
 184  *
 185  * RETURN:      Status
 186  *
 187  * DESCRIPTION: Execute a dyadic operator (2 operands) with 2 output targets
 188  *              and one implicit return value.
 189  *
 190  ******************************************************************************/
 191
 192 acpi_status
 193 acpi_ex_opcode_2A_2T_1R (
 194         struct acpi_walk_state          *walk_state)
 195 {
 196         union acpi_operand_object       **operand = &walk_state->operands[0];
 197         union acpi_operand_object       *return_desc1 = NULL;
 198         union acpi_operand_object       *return_desc2 = NULL;
 199         acpi_status                     status;
 200
 201
 202         ACPI_FUNCTION_TRACE_STR ("ex_opcode_2A_2T_1R",
 203                 acpi_ps_get_opcode_name (walk_state->opcode));
 204
 205
 206         /* Execute the opcode */
 207
 208         switch (walk_state->opcode) {
 209         case AML_DIVIDE_OP:
 210
 211                 /* Divide (Dividend, Divisor, remainder_result quotient_result) */
 212
 213                 return_desc1 = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
 214                 if (!return_desc1) {
 215                         status = AE_NO_MEMORY;
 216                         goto cleanup;
 217                 }
 218
 219                 return_desc2 = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
 220                 if (!return_desc2) {
 221                         status = AE_NO_MEMORY;
 222                         goto cleanup;
 223                 }
 224
 225                 /* Quotient to return_desc1, remainder to return_desc2 */
 226
 227                 status = acpi_ut_divide (operand[0]->integer.value,
 228                                    operand[1]->integer.value,
 229                                    &return_desc1->integer.value,
 230                                    &return_desc2->integer.value);
 231                 if (ACPI_FAILURE (status)) {
 232                         goto cleanup;
 233                 }
 234                 break;
 235
 236
 237         default:
 238
 239                 ACPI_REPORT_ERROR (("acpi_ex_opcode_2A_2T_1R: Unknown opcode %X\n",
 240                                 walk_state->opcode));
 241                 status = AE_AML_BAD_OPCODE;
 242                 goto cleanup;
 243         }
 244
 245         /* Store the results to the target reference operands */
 246
 247         status = acpi_ex_store (return_desc2, operand[2], walk_state);
 248         if (ACPI_FAILURE (status)) {
 249                 goto cleanup;
 250         }
 251
 252         status = acpi_ex_store (return_desc1, operand[3], walk_state);
 253         if (ACPI_FAILURE (status)) {
 254                 goto cleanup;
 255         }
 256
 257         /* Return the remainder */
 258
 259         walk_state->result_obj = return_desc1;
 260
 261
 262 cleanup:
 263         /*
 264          * Since the remainder is not returned indirectly, remove a reference to
 265          * it. Only the quotient is returned indirectly.
 266          */
 267         acpi_ut_remove_reference (return_desc2);
 268
 269         if (ACPI_FAILURE (status)) {
 270                 /* Delete the return object */
 271
 272                 acpi_ut_remove_reference (return_desc1);
 273         }
 274
 275         return_ACPI_STATUS (status);
 276 }
 277
 278
 279 /*******************************************************************************
 280  *
 281  * FUNCTION:    acpi_ex_opcode_2A_1T_1R
 282  *
 283  * PARAMETERS:  walk_state          - Current walk state
 284  *
 285  * RETURN:      Status
 286  *
 287  * DESCRIPTION: Execute opcode with two arguments, one target, and a return
 288  *              value.
 289  *
 290  ******************************************************************************/
 291
 292 acpi_status
 293 acpi_ex_opcode_2A_1T_1R (
 294         struct acpi_walk_state          *walk_state)
 295 {
 296         union acpi_operand_object       **operand = &walk_state->operands[0];
 297         union acpi_operand_object       *return_desc = NULL;
 298         acpi_integer                    index;
 299         acpi_status                     status = AE_OK;
 300         acpi_size                       length;
 301
 302
 303         ACPI_FUNCTION_TRACE_STR ("ex_opcode_2A_1T_1R",
 304                 acpi_ps_get_opcode_name (walk_state->opcode));
 305
 306
 307         /* Execute the opcode */
 308
 309         if (walk_state->op_info->flags & AML_MATH) {
 310                 /* All simple math opcodes (add, etc.) */
 311
 312                 return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
 313                 if (!return_desc) {
 314                         status = AE_NO_MEMORY;
 315                         goto cleanup;
 316                 }
 317
 318                 return_desc->integer.value = acpi_ex_do_math_op (walk_state->opcode,
 319                                   operand[0]->integer.value,
 320                                   operand[1]->integer.value);
 321                 goto store_result_to_target;
 322         }
 323
 324         switch (walk_state->opcode) {
 325         case AML_MOD_OP: /* Mod (Dividend, Divisor, remainder_result (ACPI 2.0) */
 326
 327                 return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
 328                 if (!return_desc) {
 329                         status = AE_NO_MEMORY;
 330                         goto cleanup;
 331                 }
 332
 333                 /* return_desc will contain the remainder */
 334
 335                 status = acpi_ut_divide (operand[0]->integer.value,
 336                                    operand[1]->integer.value,
 337                                    NULL,
 338                                    &return_desc->integer.value);
 339                 break;
 340
 341
 342         case AML_CONCAT_OP: /* Concatenate (Data1, Data2, Result) */
 343
 344                 status = acpi_ex_do_concatenate (operand[0], operand[1],
 345                                  &return_desc, walk_state);
 346                 break;
 347
 348
 349         case AML_TO_STRING_OP: /* to_string (Buffer, Length, Result) (ACPI 2.0) */
 350
 351                 /*
 352                  * Input object is guaranteed to be a buffer at this point (it may have
 353                  * been converted.)  Copy the raw buffer data to a new object of
 354                  * type String.
 355                  */
 356
 357                 /*
 358                  * Get the length of the new string. It is the smallest of:
 359                  * 1) Length of the input buffer
 360                  * 2) Max length as specified in the to_string operator
 361                  * 3) Length of input buffer up to a zero byte (null terminator)
 362                  *
 363                  * NOTE: A length of zero is ok, and will create a zero-length, null
 364                  *       terminated string.
 365                  */
 366                 length = 0;
 367                 while ((length < operand[0]->buffer.length) &&
 368                            (length < operand[1]->integer.value) &&
 369                            (operand[0]->buffer.pointer[length])) {
 370                         length++;
 371                         if (length > ACPI_MAX_STRING_CONVERSION) {
 372                                 status = AE_AML_STRING_LIMIT;
 373                                 goto cleanup;
 374                         }
 375                 }
 376
 377                 /* Allocate a new string object */
 378
 379                 return_desc = acpi_ut_create_string_object (length);
 380                 if (!return_desc) {
 381                         status = AE_NO_MEMORY;
 382                         goto cleanup;
 383                 }
 384
 385                 /* Copy the raw buffer data with no transform. NULL terminated already*/
 386
 387                 ACPI_MEMCPY (return_desc->string.pointer,
 388                         operand[0]->buffer.pointer, length);
 389                 break;
 390
 391
 392         case AML_CONCAT_RES_OP:
 393
 394                 /* concatenate_res_template (Buffer, Buffer, Result) (ACPI 2.0) */
 395
 396                 status = acpi_ex_concat_template (operand[0], operand[1],
 397                                  &return_desc, walk_state);
 398                 break;
 399
 400
 401         case AML_INDEX_OP:              /* Index (Source Index Result) */
 402
 403                 /* Create the internal return object */
 404
 405                 return_desc = acpi_ut_create_internal_object (ACPI_TYPE_LOCAL_REFERENCE);
 406                 if (!return_desc) {
 407                         status = AE_NO_MEMORY;
 408                         goto cleanup;
 409                 }
 410
 411                 index = operand[1]->integer.value;
 412
 413                 /* At this point, the Source operand is a Package, Buffer, or String */
 414
 415                 if (ACPI_GET_OBJECT_TYPE (operand[0]) == ACPI_TYPE_PACKAGE) {
 416                         /* Object to be indexed is a Package */
 417
 418                         if (index >= operand[0]->package.count) {
 419                                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 420                                         "Index value (%X%8.8X) beyond package end (%X)\n",
 421                                         ACPI_FORMAT_UINT64 (index), operand[0]->package.count));
 422                                 status = AE_AML_PACKAGE_LIMIT;
 423                                 goto cleanup;
 424                         }
 425
 426                         return_desc->reference.target_type = ACPI_TYPE_PACKAGE;
 427                         return_desc->reference.object    = operand[0];
 428                         return_desc->reference.where     = &operand[0]->package.elements [
 429                                           index];
 430                 }
 431                 else {
 432                         /* Object to be indexed is a Buffer/String */
 433
 434                         if (index >= operand[0]->buffer.length) {
 435                                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 436                                         "Index value (%X%8.8X) beyond end of buffer (%X)\n",
 437                                         ACPI_FORMAT_UINT64 (index), operand[0]->buffer.length));
 438                                 status = AE_AML_BUFFER_LIMIT;
 439                                 goto cleanup;
 440                         }
 441
 442                         return_desc->reference.target_type = ACPI_TYPE_BUFFER_FIELD;
 443                         return_desc->reference.object    = operand[0];
 444                 }
 445
 446                 /*
 447                  * Add a reference to the target package/buffer/string for the life
 448                  * of the index.
 449                  */
 450                 acpi_ut_add_reference (operand[0]);
 451
 452                 /* Complete the Index reference object */
 453
 454                 return_desc->reference.opcode    = AML_INDEX_OP;
 455                 return_desc->reference.offset    = (u32) index;
 456
 457                 /* Store the reference to the Target */
 458
 459                 status = acpi_ex_store (return_desc, operand[2], walk_state);
 460
 461                 /* Return the reference */
 462
 463                 walk_state->result_obj = return_desc;
 464                 goto cleanup;
 465
 466
 467         default:
 468
 469                 ACPI_REPORT_ERROR (("acpi_ex_opcode_2A_1T_1R: Unknown opcode %X\n",
 470                                 walk_state->opcode));
 471                 status = AE_AML_BAD_OPCODE;
 472                 break;
 473         }
 474
 475
 476 store_result_to_target:
 477
 478         if (ACPI_SUCCESS (status)) {
 479                 /*
 480                  * Store the result of the operation (which is now in return_desc) into
 481                  * the Target descriptor.
 482                  */
 483                 status = acpi_ex_store (return_desc, operand[2], walk_state);
 484                 if (ACPI_FAILURE (status)) {
 485                         goto cleanup;
 486                 }
 487
 488                 if (!walk_state->result_obj) {
 489                         walk_state->result_obj = return_desc;
 490                 }
 491         }
 492
 493
 494 cleanup:
 495
 496         /* Delete return object on error */
 497
 498         if (ACPI_FAILURE (status)) {
 499                 acpi_ut_remove_reference (return_desc);
 500         }
 501
 502         return_ACPI_STATUS (status);
 503 }
 504
 505
 506 /*******************************************************************************
 507  *
 508  * FUNCTION:    acpi_ex_opcode_2A_0T_1R
 509  *
 510  * PARAMETERS:  walk_state          - Current walk state
 511  *
 512  * RETURN:      Status
 513  *
 514  * DESCRIPTION: Execute opcode with 2 arguments, no target, and a return value
 515  *
 516  ******************************************************************************/
 517
 518 acpi_status
 519 acpi_ex_opcode_2A_0T_1R (
 520         struct acpi_walk_state          *walk_state)
 521 {
 522         union acpi_operand_object       **operand = &walk_state->operands[0];
 523         union acpi_operand_object       *return_desc = NULL;
 524         acpi_status                     status = AE_OK;
 525         u8                              logical_result = FALSE;
 526
 527
 528         ACPI_FUNCTION_TRACE_STR ("ex_opcode_2A_0T_1R",
 529                 acpi_ps_get_opcode_name (walk_state->opcode));
 530
 531
 532         /* Create the internal return object */
 533
 534         return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
 535         if (!return_desc) {
 536                 status = AE_NO_MEMORY;
 537                 goto cleanup;
 538         }
 539
 540         /* Execute the Opcode */
 541
 542         if (walk_state->op_info->flags & AML_LOGICAL_NUMERIC) {
 543                 /* logical_op (Operand0, Operand1) */
 544
 545                 status = acpi_ex_do_logical_numeric_op (walk_state->opcode,
 546                                   operand[0]->integer.value, operand[1]->integer.value,
 547                                   &logical_result);
 548                 goto store_logical_result;
 549         }
 550         else if (walk_state->op_info->flags & AML_LOGICAL) {
 551                 /* logical_op (Operand0, Operand1) */
 552
 553                 status = acpi_ex_do_logical_op (walk_state->opcode, operand[0],
 554                                  operand[1], &logical_result);
 555                 goto store_logical_result;
 556         }
 557
 558         switch (walk_state->opcode) {
 559         case AML_ACQUIRE_OP:            /* Acquire (mutex_object, Timeout) */
 560
 561                 status = acpi_ex_acquire_mutex (operand[1], operand[0], walk_state);
 562                 if (status == AE_TIME) {
 563                         logical_result = TRUE;      /* TRUE = Acquire timed out */
 564                         status = AE_OK;
 565                 }
 566                 break;
 567
 568
 569         case AML_WAIT_OP:               /* Wait (event_object, Timeout) */
 570
 571                 status = acpi_ex_system_wait_event (operand[1], operand[0]);
 572                 if (status == AE_TIME) {
 573                         logical_result = TRUE;      /* TRUE, Wait timed out */
 574                         status = AE_OK;
 575                 }
 576                 break;
 577
 578
 579         default:
 580
 581                 ACPI_REPORT_ERROR (("acpi_ex_opcode_2A_0T_1R: Unknown opcode %X\n",
 582                         walk_state->opcode));
 583                 status = AE_AML_BAD_OPCODE;
 584                 goto cleanup;
 585         }
 586
 587
 588 store_logical_result:
 589         /*
 590          * Set return value to according to logical_result. logical TRUE (all ones)
 591          * Default is FALSE (zero)
 592          */
 593         if (logical_result) {
 594                 return_desc->integer.value = ACPI_INTEGER_MAX;
 595         }
 596
 597         walk_state->result_obj = return_desc;
 598
 599
 600 cleanup:
 601
 602         /* Delete return object on error */
 603
 604         if (ACPI_FAILURE (status)) {
 605                 acpi_ut_remove_reference (return_desc);
 606         }
 607
 608         return_ACPI_STATUS (status);
 609 }
 610
 611