drivers/acpi/acpica/utxface.c

   1 /******************************************************************************
   2  *
   3  * Module Name: utxface - External interfaces for "global" ACPI functions
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2008, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acevents.h"
  47 #include "acnamesp.h"
  48 #include "acdebug.h"
  49 #include "actables.h"
  50
  51 #define _COMPONENT          ACPI_UTILITIES
  52 ACPI_MODULE_NAME("utxface")
  53
  54 #ifndef ACPI_ASL_COMPILER
  55 /*******************************************************************************
  56  *
  57  * FUNCTION:    acpi_initialize_subsystem
  58  *
  59  * PARAMETERS:  None
  60  *
  61  * RETURN:      Status
  62  *
  63  * DESCRIPTION: Initializes all global variables.  This is the first function
  64  *              called, so any early initialization belongs here.
  65  *
  66  ******************************************************************************/
  67 acpi_status __init acpi_initialize_subsystem(void)
  68 {
  69         acpi_status status;
  70
  71         ACPI_FUNCTION_TRACE(acpi_initialize_subsystem);
  72
  73         acpi_gbl_startup_flags = ACPI_SUBSYSTEM_INITIALIZE;
  74         ACPI_DEBUG_EXEC(acpi_ut_init_stack_ptr_trace());
  75
  76         /* Initialize the OS-Dependent layer */
  77
  78         status = acpi_os_initialize();
  79         if (ACPI_FAILURE(status)) {
  80                 ACPI_EXCEPTION((AE_INFO, status, "During OSL initialization"));
  81                 return_ACPI_STATUS(status);
  82         }
  83
  84         /* Initialize all globals used by the subsystem */
  85
  86         status = acpi_ut_init_globals();
  87         if (ACPI_FAILURE(status)) {
  88                 ACPI_EXCEPTION((AE_INFO, status,
  89                                 "During initialization of globals"));
  90                 return_ACPI_STATUS(status);
  91         }
  92
  93         /* Create the default mutex objects */
  94
  95         status = acpi_ut_mutex_initialize();
  96         if (ACPI_FAILURE(status)) {
  97                 ACPI_EXCEPTION((AE_INFO, status,
  98                                 "During Global Mutex creation"));
  99                 return_ACPI_STATUS(status);
 100         }
 101
 102         /*
 103          * Initialize the namespace manager and
 104          * the root of the namespace tree
 105          */
 106         status = acpi_ns_root_initialize();
 107         if (ACPI_FAILURE(status)) {
 108                 ACPI_EXCEPTION((AE_INFO, status,
 109                                 "During Namespace initialization"));
 110                 return_ACPI_STATUS(status);
 111         }
 112
 113         /* If configured, initialize the AML debugger */
 114
 115         ACPI_DEBUGGER_EXEC(status = acpi_db_initialize());
 116         return_ACPI_STATUS(status);
 117 }
 118
 119 /*******************************************************************************
 120  *
 121  * FUNCTION:    acpi_enable_subsystem
 122  *
 123  * PARAMETERS:  Flags           - Init/enable Options
 124  *
 125  * RETURN:      Status
 126  *
 127  * DESCRIPTION: Completes the subsystem initialization including hardware.
 128  *              Puts system into ACPI mode if it isn't already.
 129  *
 130  ******************************************************************************/
 131 acpi_status acpi_enable_subsystem(u32 flags)
 132 {
 133         acpi_status status = AE_OK;
 134
 135         ACPI_FUNCTION_TRACE(acpi_enable_subsystem);
 136
 137         /* Enable ACPI mode */
 138
 139         if (!(flags & ACPI_NO_ACPI_ENABLE)) {
 140                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 141                                   "[Init] Going into ACPI mode\n"));
 142
 143                 acpi_gbl_original_mode = acpi_hw_get_mode();
 144
 145                 status = acpi_enable();
 146                 if (ACPI_FAILURE(status)) {
 147                         ACPI_WARNING((AE_INFO, "AcpiEnable failed"));
 148                         return_ACPI_STATUS(status);
 149                 }
 150         }
 151
 152         /*
 153          * Obtain a permanent mapping for the FACS. This is required for the
 154          * Global Lock and the Firmware Waking Vector
 155          */
 156         status = acpi_tb_initialize_facs();
 157         if (ACPI_FAILURE(status)) {
 158                 ACPI_WARNING((AE_INFO, "Could not map the FACS table"));
 159                 return_ACPI_STATUS(status);
 160         }
 161
 162         /*
 163          * Install the default op_region handlers. These are installed unless
 164          * other handlers have already been installed via the
 165          * install_address_space_handler interface.
 166          */
 167         if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) {
 168                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 169                                   "[Init] Installing default address space handlers\n"));
 170
 171                 status = acpi_ev_install_region_handlers();
 172                 if (ACPI_FAILURE(status)) {
 173                         return_ACPI_STATUS(status);
 174                 }
 175         }
 176
 177         /*
 178          * Initialize ACPI Event handling (Fixed and General Purpose)
 179          *
 180          * Note1: We must have the hardware and events initialized before we can
 181          * execute any control methods safely. Any control method can require
 182          * ACPI hardware support, so the hardware must be fully initialized before
 183          * any method execution!
 184          *
 185          * Note2: Fixed events are initialized and enabled here. GPEs are
 186          * initialized, but cannot be enabled until after the hardware is
 187          * completely initialized (SCI and global_lock activated)
 188          */
 189         if (!(flags & ACPI_NO_EVENT_INIT)) {
 190                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 191                                   "[Init] Initializing ACPI events\n"));
 192
 193                 status = acpi_ev_initialize_events();
 194                 if (ACPI_FAILURE(status)) {
 195                         return_ACPI_STATUS(status);
 196                 }
 197         }
 198
 199         /*
 200          * Install the SCI handler and Global Lock handler. This completes the
 201          * hardware initialization.
 202          */
 203         if (!(flags & ACPI_NO_HANDLER_INIT)) {
 204                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 205                                   "[Init] Installing SCI/GL handlers\n"));
 206
 207                 status = acpi_ev_install_xrupt_handlers();
 208                 if (ACPI_FAILURE(status)) {
 209                         return_ACPI_STATUS(status);
 210                 }
 211         }
 212
 213         return_ACPI_STATUS(status);
 214 }
 215
 216 ACPI_EXPORT_SYMBOL(acpi_enable_subsystem)
 217
 218 /*******************************************************************************
 219  *
 220  * FUNCTION:    acpi_initialize_objects
 221  *
 222  * PARAMETERS:  Flags           - Init/enable Options
 223  *
 224  * RETURN:      Status
 225  *
 226  * DESCRIPTION: Completes namespace initialization by initializing device
 227  *              objects and executing AML code for Regions, buffers, etc.
 228  *
 229  ******************************************************************************/
 230 acpi_status acpi_initialize_objects(u32 flags)
 231 {
 232         acpi_status status = AE_OK;
 233
 234         ACPI_FUNCTION_TRACE(acpi_initialize_objects);
 235
 236         /*
 237          * Run all _REG methods
 238          *
 239          * Note: Any objects accessed by the _REG methods will be automatically
 240          * initialized, even if they contain executable AML (see the call to
 241          * acpi_ns_initialize_objects below).
 242          */
 243         if (!(flags & ACPI_NO_ADDRESS_SPACE_INIT)) {
 244                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 245                                   "[Init] Executing _REG OpRegion methods\n"));
 246
 247                 status = acpi_ev_initialize_op_regions();
 248                 if (ACPI_FAILURE(status)) {
 249                         return_ACPI_STATUS(status);
 250                 }
 251         }
 252
 253         /*
 254          * Initialize the objects that remain uninitialized. This runs the
 255          * executable AML that may be part of the declaration of these objects:
 256          * operation_regions, buffer_fields, Buffers, and Packages.
 257          */
 258         if (!(flags & ACPI_NO_OBJECT_INIT)) {
 259                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 260                                   "[Init] Completing Initialization of ACPI Objects\n"));
 261
 262                 status = acpi_ns_initialize_objects();
 263                 if (ACPI_FAILURE(status)) {
 264                         return_ACPI_STATUS(status);
 265                 }
 266         }
 267
 268         /*
 269          * Initialize all device objects in the namespace. This runs the device
 270          * _STA and _INI methods.
 271          */
 272         if (!(flags & ACPI_NO_DEVICE_INIT)) {
 273                 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
 274                                   "[Init] Initializing ACPI Devices\n"));
 275
 276                 status = acpi_ns_initialize_devices();
 277                 if (ACPI_FAILURE(status)) {
 278                         return_ACPI_STATUS(status);
 279                 }
 280         }
 281
 282         /*
 283          * Complete the GPE initialization for the GPE blocks defined in the FADT
 284          * (GPE block 0 and 1).
 285          *
 286          * Note1: This is where the _PRW methods are executed for the GPEs. These
 287          * methods can only be executed after the SCI and Global Lock handlers are
 288          * installed and initialized.
 289          *
 290          * Note2: Currently, there seems to be no need to run the _REG methods
 291          * before execution of the _PRW methods and enabling of the GPEs.
 292          */
 293         if (!(flags & ACPI_NO_EVENT_INIT)) {
 294                 status = acpi_ev_install_fadt_gpes();
 295                 if (ACPI_FAILURE(status))
 296                         return (status);
 297         }
 298
 299         /*
 300          * Empty the caches (delete the cached objects) on the assumption that
 301          * the table load filled them up more than they will be at runtime --
 302          * thus wasting non-paged memory.
 303          */
 304         status = acpi_purge_cached_objects();
 305
 306         acpi_gbl_startup_flags |= ACPI_INITIALIZED_OK;
 307         return_ACPI_STATUS(status);
 308 }
 309
 310 ACPI_EXPORT_SYMBOL(acpi_initialize_objects)
 311
 312 #endif
 313 /*******************************************************************************
 314  *
 315  * FUNCTION:    acpi_terminate
 316  *
 317  * PARAMETERS:  None
 318  *
 319  * RETURN:      Status
 320  *
 321  * DESCRIPTION: Shutdown the ACPI subsystem.  Release all resources.
 322  *
 323  ******************************************************************************/
 324 acpi_status acpi_terminate(void)
 325 {
 326         acpi_status status;
 327
 328         ACPI_FUNCTION_TRACE(acpi_terminate);
 329
 330         /* Terminate the AML Debugger if present */
 331
 332         ACPI_DEBUGGER_EXEC(acpi_gbl_db_terminate_threads = TRUE);
 333
 334         /* Shutdown and free all resources */
 335
 336         acpi_ut_subsystem_shutdown();
 337
 338         /* Free the mutex objects */
 339
 340         acpi_ut_mutex_terminate();
 341
 342 #ifdef ACPI_DEBUGGER
 343
 344         /* Shut down the debugger */
 345
 346         acpi_db_terminate();
 347 #endif
 348
 349         /* Now we can shutdown the OS-dependent layer */
 350
 351         status = acpi_os_terminate();
 352         return_ACPI_STATUS(status);
 353 }
 354
 355 ACPI_EXPORT_SYMBOL(acpi_terminate)
 356 #ifndef ACPI_ASL_COMPILER
 357 #ifdef ACPI_FUTURE_USAGE
 358 /*******************************************************************************
 359  *
 360  * FUNCTION:    acpi_subsystem_status
 361  *
 362  * PARAMETERS:  None
 363  *
 364  * RETURN:      Status of the ACPI subsystem
 365  *
 366  * DESCRIPTION: Other drivers that use the ACPI subsystem should call this
 367  *              before making any other calls, to ensure the subsystem
 368  *              initialized successfully.
 369  *
 370  ******************************************************************************/
 371 acpi_status acpi_subsystem_status(void)
 372 {
 373
 374         if (acpi_gbl_startup_flags & ACPI_INITIALIZED_OK) {
 375                 return (AE_OK);
 376         } else {
 377                 return (AE_ERROR);
 378         }
 379 }
 380
 381 ACPI_EXPORT_SYMBOL(acpi_subsystem_status)
 382
 383 /*******************************************************************************
 384  *
 385  * FUNCTION:    acpi_get_system_info
 386  *
 387  * PARAMETERS:  out_buffer      - A buffer to receive the resources for the
 388  *                                device
 389  *
 390  * RETURN:      Status          - the status of the call
 391  *
 392  * DESCRIPTION: This function is called to get information about the current
 393  *              state of the ACPI subsystem.  It will return system information
 394  *              in the out_buffer.
 395  *
 396  *              If the function fails an appropriate status will be returned
 397  *              and the value of out_buffer is undefined.
 398  *
 399  ******************************************************************************/
 400 acpi_status acpi_get_system_info(struct acpi_buffer * out_buffer)
 401 {
 402         struct acpi_system_info *info_ptr;
 403         acpi_status status;
 404
 405         ACPI_FUNCTION_TRACE(acpi_get_system_info);
 406
 407         /* Parameter validation */
 408
 409         status = acpi_ut_validate_buffer(out_buffer);
 410         if (ACPI_FAILURE(status)) {
 411                 return_ACPI_STATUS(status);
 412         }
 413
 414         /* Validate/Allocate/Clear caller buffer */
 415
 416         status =
 417             acpi_ut_initialize_buffer(out_buffer,
 418                                       sizeof(struct acpi_system_info));
 419         if (ACPI_FAILURE(status)) {
 420                 return_ACPI_STATUS(status);
 421         }
 422
 423         /*
 424          * Populate the return buffer
 425          */
 426         info_ptr = (struct acpi_system_info *)out_buffer->pointer;
 427
 428         info_ptr->acpi_ca_version = ACPI_CA_VERSION;
 429
 430         /* System flags (ACPI capabilities) */
 431
 432         info_ptr->flags = ACPI_SYS_MODE_ACPI;
 433
 434         /* Timer resolution - 24 or 32 bits  */
 435
 436         if (acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER) {
 437                 info_ptr->timer_resolution = 24;
 438         } else {
 439                 info_ptr->timer_resolution = 32;
 440         }
 441
 442         /* Clear the reserved fields */
 443
 444         info_ptr->reserved1 = 0;
 445         info_ptr->reserved2 = 0;
 446
 447         /* Current debug levels */
 448
 449         info_ptr->debug_layer = acpi_dbg_layer;
 450         info_ptr->debug_level = acpi_dbg_level;
 451
 452         return_ACPI_STATUS(AE_OK);
 453 }
 454
 455 ACPI_EXPORT_SYMBOL(acpi_get_system_info)
 456
 457 /*****************************************************************************
 458  *
 459  * FUNCTION:    acpi_install_initialization_handler
 460  *
 461  * PARAMETERS:  Handler             - Callback procedure
 462  *              Function            - Not (currently) used, see below
 463  *
 464  * RETURN:      Status
 465  *
 466  * DESCRIPTION: Install an initialization handler
 467  *
 468  * TBD: When a second function is added, must save the Function also.
 469  *
 470  ****************************************************************************/
 471 acpi_status
 472 acpi_install_initialization_handler(acpi_init_handler handler, u32 function)
 473 {
 474
 475         if (!handler) {
 476                 return (AE_BAD_PARAMETER);
 477         }
 478
 479         if (acpi_gbl_init_handler) {
 480                 return (AE_ALREADY_EXISTS);
 481         }
 482
 483         acpi_gbl_init_handler = handler;
 484         return AE_OK;
 485 }
 486
 487 ACPI_EXPORT_SYMBOL(acpi_install_initialization_handler)
 488 #endif                          /*  ACPI_FUTURE_USAGE  */
 489 /*****************************************************************************
 490  *
 491  * FUNCTION:    acpi_purge_cached_objects
 492  *
 493  * PARAMETERS:  None
 494  *
 495  * RETURN:      Status
 496  *
 497  * DESCRIPTION: Empty all caches (delete the cached objects)
 498  *
 499  ****************************************************************************/
 500 acpi_status acpi_purge_cached_objects(void)
 501 {
 502         ACPI_FUNCTION_TRACE(acpi_purge_cached_objects);
 503
 504         (void)acpi_os_purge_cache(acpi_gbl_state_cache);
 505         (void)acpi_os_purge_cache(acpi_gbl_operand_cache);
 506         (void)acpi_os_purge_cache(acpi_gbl_ps_node_cache);
 507         (void)acpi_os_purge_cache(acpi_gbl_ps_node_ext_cache);
 508         return_ACPI_STATUS(AE_OK);
 509 }
 510
 511 ACPI_EXPORT_SYMBOL(acpi_purge_cached_objects)
 512 #endif