drivers/acpi/acpica/tbfadt.c

   1 /******************************************************************************
   2  *
   3  * Module Name: tbfadt   - FADT table utilities
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2008, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "actables.h"
  47
  48 #define _COMPONENT          ACPI_TABLES
  49 ACPI_MODULE_NAME("tbfadt")
  50
  51 /* Local prototypes */
  52 static inline void
  53 acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
  54                              u8 space_id, u8 byte_width, u64 address);
  55
  56 static void acpi_tb_convert_fadt(void);
  57
  58 static void acpi_tb_validate_fadt(void);
  59
  60 static void acpi_tb_setup_fadt_registers(void);
  61
  62 /* Table for conversion of FADT to common internal format and FADT validation */
  63
  64 typedef struct acpi_fadt_info {
  65         char *name;
  66         u8 address64;
  67         u8 address32;
  68         u8 length;
  69         u8 default_length;
  70         u8 type;
  71
  72 } acpi_fadt_info;
  73
  74 #define ACPI_FADT_REQUIRED          1
  75 #define ACPI_FADT_SEPARATE_LENGTH   2
  76
  77 static struct acpi_fadt_info fadt_info_table[] = {
  78         {"Pm1aEventBlock",
  79          ACPI_FADT_OFFSET(xpm1a_event_block),
  80          ACPI_FADT_OFFSET(pm1a_event_block),
  81          ACPI_FADT_OFFSET(pm1_event_length),
  82          ACPI_PM1_REGISTER_WIDTH * 2,   /* Enable + Status register */
  83          ACPI_FADT_REQUIRED},
  84
  85         {"Pm1bEventBlock",
  86          ACPI_FADT_OFFSET(xpm1b_event_block),
  87          ACPI_FADT_OFFSET(pm1b_event_block),
  88          ACPI_FADT_OFFSET(pm1_event_length),
  89          ACPI_PM1_REGISTER_WIDTH * 2,   /* Enable + Status register */
  90          0},
  91
  92         {"Pm1aControlBlock",
  93          ACPI_FADT_OFFSET(xpm1a_control_block),
  94          ACPI_FADT_OFFSET(pm1a_control_block),
  95          ACPI_FADT_OFFSET(pm1_control_length),
  96          ACPI_PM1_REGISTER_WIDTH,
  97          ACPI_FADT_REQUIRED},
  98
  99         {"Pm1bControlBlock",
 100          ACPI_FADT_OFFSET(xpm1b_control_block),
 101          ACPI_FADT_OFFSET(pm1b_control_block),
 102          ACPI_FADT_OFFSET(pm1_control_length),
 103          ACPI_PM1_REGISTER_WIDTH,
 104          0},
 105
 106         {"Pm2ControlBlock",
 107          ACPI_FADT_OFFSET(xpm2_control_block),
 108          ACPI_FADT_OFFSET(pm2_control_block),
 109          ACPI_FADT_OFFSET(pm2_control_length),
 110          ACPI_PM2_REGISTER_WIDTH,
 111          ACPI_FADT_SEPARATE_LENGTH},
 112
 113         {"PmTimerBlock",
 114          ACPI_FADT_OFFSET(xpm_timer_block),
 115          ACPI_FADT_OFFSET(pm_timer_block),
 116          ACPI_FADT_OFFSET(pm_timer_length),
 117          ACPI_PM_TIMER_WIDTH,
 118          ACPI_FADT_REQUIRED},
 119
 120         {"Gpe0Block",
 121          ACPI_FADT_OFFSET(xgpe0_block),
 122          ACPI_FADT_OFFSET(gpe0_block),
 123          ACPI_FADT_OFFSET(gpe0_block_length),
 124          0,
 125          ACPI_FADT_SEPARATE_LENGTH},
 126
 127         {"Gpe1Block",
 128          ACPI_FADT_OFFSET(xgpe1_block),
 129          ACPI_FADT_OFFSET(gpe1_block),
 130          ACPI_FADT_OFFSET(gpe1_block_length),
 131          0,
 132          ACPI_FADT_SEPARATE_LENGTH}
 133 };
 134
 135 #define ACPI_FADT_INFO_ENTRIES \
 136                         (sizeof (fadt_info_table) / sizeof (struct acpi_fadt_info))
 137
 138 /* Table used to split Event Blocks into separate status/enable registers */
 139
 140 typedef struct acpi_fadt_pm_info {
 141         struct acpi_generic_address *target;
 142         u8 source;
 143         u8 register_num;
 144
 145 } acpi_fadt_pm_info;
 146
 147 static struct acpi_fadt_pm_info fadt_pm_info_table[] = {
 148         {&acpi_gbl_xpm1a_status,
 149          ACPI_FADT_OFFSET(xpm1a_event_block),
 150          0},
 151
 152         {&acpi_gbl_xpm1a_enable,
 153          ACPI_FADT_OFFSET(xpm1a_event_block),
 154          1},
 155
 156         {&acpi_gbl_xpm1b_status,
 157          ACPI_FADT_OFFSET(xpm1b_event_block),
 158          0},
 159
 160         {&acpi_gbl_xpm1b_enable,
 161          ACPI_FADT_OFFSET(xpm1b_event_block),
 162          1}
 163 };
 164
 165 #define ACPI_FADT_PM_INFO_ENTRIES \
 166                         (sizeof (fadt_pm_info_table) / sizeof (struct acpi_fadt_pm_info))
 167
 168 /*******************************************************************************
 169  *
 170  * FUNCTION:    acpi_tb_init_generic_address
 171  *
 172  * PARAMETERS:  generic_address     - GAS struct to be initialized
 173  *              byte_width          - Width of this register
 174  *              Address             - Address of the register
 175  *
 176  * RETURN:      None
 177  *
 178  * DESCRIPTION: Initialize a Generic Address Structure (GAS)
 179  *              See the ACPI specification for a full description and
 180  *              definition of this structure.
 181  *
 182  ******************************************************************************/
 183
 184 static inline void
 185 acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
 186                              u8 space_id, u8 byte_width, u64 address)
 187 {
 188
 189         /*
 190          * The 64-bit Address field is non-aligned in the byte packed
 191          * GAS struct.
 192          */
 193         ACPI_MOVE_64_TO_64(&generic_address->address, &address);
 194
 195         /* All other fields are byte-wide */
 196
 197         generic_address->space_id = space_id;
 198         generic_address->bit_width = (u8)ACPI_MUL_8(byte_width);
 199         generic_address->bit_offset = 0;
 200         generic_address->access_width = 0;      /* Access width ANY */
 201 }
 202
 203 /*******************************************************************************
 204  *
 205  * FUNCTION:    acpi_tb_parse_fadt
 206  *
 207  * PARAMETERS:  table_index         - Index for the FADT
 208  *
 209  * RETURN:      None
 210  *
 211  * DESCRIPTION: Initialize the FADT, DSDT and FACS tables
 212  *              (FADT contains the addresses of the DSDT and FACS)
 213  *
 214  ******************************************************************************/
 215
 216 void acpi_tb_parse_fadt(u32 table_index)
 217 {
 218         u32 length;
 219         struct acpi_table_header *table;
 220
 221         /*
 222          * The FADT has multiple versions with different lengths,
 223          * and it contains pointers to both the DSDT and FACS tables.
 224          *
 225          * Get a local copy of the FADT and convert it to a common format
 226          * Map entire FADT, assumed to be smaller than one page.
 227          */
 228         length = acpi_gbl_root_table_list.tables[table_index].length;
 229
 230         table =
 231             acpi_os_map_memory(acpi_gbl_root_table_list.tables[table_index].
 232                                address, length);
 233         if (!table) {
 234                 return;
 235         }
 236
 237         /*
 238          * Validate the FADT checksum before we copy the table. Ignore
 239          * checksum error as we want to try to get the DSDT and FACS.
 240          */
 241         (void)acpi_tb_verify_checksum(table, length);
 242
 243         /* Create a local copy of the FADT in common ACPI 2.0+ format */
 244
 245         acpi_tb_create_local_fadt(table, length);
 246
 247         /* All done with the real FADT, unmap it */
 248
 249         acpi_os_unmap_memory(table, length);
 250
 251         /* Obtain the DSDT and FACS tables via their addresses within the FADT */
 252
 253         acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xdsdt,
 254                               ACPI_SIG_DSDT, ACPI_TABLE_INDEX_DSDT);
 255
 256         acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xfacs,
 257                               ACPI_SIG_FACS, ACPI_TABLE_INDEX_FACS);
 258 }
 259
 260 /*******************************************************************************
 261  *
 262  * FUNCTION:    acpi_tb_create_local_fadt
 263  *
 264  * PARAMETERS:  Table               - Pointer to BIOS FADT
 265  *              Length              - Length of the table
 266  *
 267  * RETURN:      None
 268  *
 269  * DESCRIPTION: Get a local copy of the FADT and convert it to a common format.
 270  *              Performs validation on some important FADT fields.
 271  *
 272  * NOTE:        We create a local copy of the FADT regardless of the version.
 273  *
 274  ******************************************************************************/
 275
 276 void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
 277 {
 278
 279         /*
 280          * Check if the FADT is larger than the largest table that we expect
 281          * (the ACPI 2.0/3.0 version). If so, truncate the table, and issue
 282          * a warning.
 283          */
 284         if (length > sizeof(struct acpi_table_fadt)) {
 285                 ACPI_WARNING((AE_INFO,
 286                               "FADT (revision %u) is longer than ACPI 2.0 version, "
 287                               "truncating length 0x%X to 0x%X",
 288                               table->revision, length,
 289                               (u32)sizeof(struct acpi_table_fadt)));
 290         }
 291
 292         /* Clear the entire local FADT */
 293
 294         ACPI_MEMSET(&acpi_gbl_FADT, 0, sizeof(struct acpi_table_fadt));
 295
 296         /* Copy the original FADT, up to sizeof (struct acpi_table_fadt) */
 297
 298         ACPI_MEMCPY(&acpi_gbl_FADT, table,
 299                     ACPI_MIN(length, sizeof(struct acpi_table_fadt)));
 300
 301         /* Convert the local copy of the FADT to the common internal format */
 302
 303         acpi_tb_convert_fadt();
 304
 305         /* Validate FADT values now, before we make any changes */
 306
 307         acpi_tb_validate_fadt();
 308
 309         /* Initialize the global ACPI register structures */
 310
 311         acpi_tb_setup_fadt_registers();
 312 }
 313
 314 /*******************************************************************************
 315  *
 316  * FUNCTION:    acpi_tb_convert_fadt
 317  *
 318  * PARAMETERS:  None, uses acpi_gbl_FADT
 319  *
 320  * RETURN:      None
 321  *
 322  * DESCRIPTION: Converts all versions of the FADT to a common internal format.
 323  *              Expand 32-bit addresses to 64-bit as necessary.
 324  *
 325  * NOTE:        acpi_gbl_FADT must be of size (struct acpi_table_fadt),
 326  *              and must contain a copy of the actual FADT.
 327  *
 328  * Notes on 64-bit register addresses:
 329  *
 330  * After this FADT conversion, later ACPICA code will only use the 64-bit "X"
 331  * fields of the FADT for all ACPI register addresses.
 332  *
 333  * The 64-bit "X" fields are optional extensions to the original 32-bit FADT
 334  * V1.0 fields. Even if they are present in the FADT, they are optional and
 335  * are unused if the BIOS sets them to zero. Therefore, we must copy/expand
 336  * 32-bit V1.0 fields if the corresponding X field is zero.
 337  *
 338  * For ACPI 1.0 FADTs, all 32-bit address fields are expanded to the
 339  * corresponding "X" fields in the internal FADT.
 340  *
 341  * For ACPI 2.0+ FADTs, all valid (non-zero) 32-bit address fields are expanded
 342  * to the corresponding 64-bit X fields. For compatibility with other ACPI
 343  * implementations, we ignore the 64-bit field if the 32-bit field is valid,
 344  * regardless of whether the host OS is 32-bit or 64-bit.
 345  *
 346  ******************************************************************************/
 347
 348 static void acpi_tb_convert_fadt(void)
 349 {
 350         struct acpi_generic_address *address64;
 351         u32 address32;
 352         u32 i;
 353
 354         /* Update the local FADT table header length */
 355
 356         acpi_gbl_FADT.header.length = sizeof(struct acpi_table_fadt);
 357
 358         /*
 359          * Expand the 32-bit FACS and DSDT addresses to 64-bit as necessary.
 360          * Later code will always use the X 64-bit field. Also, check for an
 361          * address mismatch between the 32-bit and 64-bit address fields
 362          * (FIRMWARE_CTRL/X_FIRMWARE_CTRL, DSDT/X_DSDT) which would indicate
 363          * the presence of two FACS or two DSDT tables.
 364          */
 365         if (!acpi_gbl_FADT.Xfacs) {
 366                 acpi_gbl_FADT.Xfacs = (u64) acpi_gbl_FADT.facs;
 367         } else if (acpi_gbl_FADT.facs &&
 368                    (acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) {
 369                 ACPI_WARNING((AE_INFO,
 370                     "32/64 FACS address mismatch in FADT - two FACS tables!"));
 371         }
 372
 373         if (!acpi_gbl_FADT.Xdsdt) {
 374                 acpi_gbl_FADT.Xdsdt = (u64) acpi_gbl_FADT.dsdt;
 375         } else if (acpi_gbl_FADT.dsdt &&
 376                    (acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) {
 377                 ACPI_WARNING((AE_INFO,
 378                     "32/64 DSDT address mismatch in FADT - two DSDT tables!"));
 379         }
 380
 381         /*
 382          * For ACPI 1.0 FADTs (revision 1 or 2), ensure that reserved fields which
 383          * should be zero are indeed zero. This will workaround BIOSs that
 384          * inadvertently place values in these fields.
 385          *
 386          * The ACPI 1.0 reserved fields that will be zeroed are the bytes located at
 387          * offset 45, 55, 95, and the word located at offset 109, 110.
 388          */
 389         if (acpi_gbl_FADT.header.revision < FADT2_REVISION_ID) {
 390                 acpi_gbl_FADT.preferred_profile = 0;
 391                 acpi_gbl_FADT.pstate_control = 0;
 392                 acpi_gbl_FADT.cst_control = 0;
 393                 acpi_gbl_FADT.boot_flags = 0;
 394         }
 395
 396         /*
 397          * Expand the ACPI 1.0 32-bit addresses to the ACPI 2.0 64-bit "X"
 398          * generic address structures as necessary. Later code will always use
 399          * the 64-bit address structures.
 400          *
 401          * March 2009:
 402          * We now always use the 32-bit address if it is valid (non-null). This
 403          * is not in accordance with the ACPI specification which states that
 404          * the 64-bit address supersedes the 32-bit version, but we do this for
 405          * compatibility with other ACPI implementations. Most notably, in the
 406          * case where both the 32 and 64 versions are non-null, we use the 32-bit
 407          * version. This is the only address that is guaranteed to have been
 408          * tested by the BIOS manufacturer.
 409          */
 410         for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
 411                 address32 = *ACPI_ADD_PTR(u32,
 412                                           &acpi_gbl_FADT,
 413                                           fadt_info_table[i].address32);
 414
 415                 address64 = ACPI_ADD_PTR(struct acpi_generic_address,
 416                                          &acpi_gbl_FADT,
 417                                          fadt_info_table[i].address64);
 418
 419                 /*
 420                  * If both 32- and 64-bit addresses are valid (non-zero),
 421                  * they must match.
 422                  */
 423                 if (address64->address && address32 &&
 424                     (address64->address != (u64) address32)) {
 425                         ACPI_ERROR((AE_INFO,
 426                                     "32/64X address mismatch in %s: %8.8X/%8.8X%8.8X, using 32",
 427                                     fadt_info_table[i].name, address32,
 428                                     ACPI_FORMAT_UINT64(address64->address)));
 429                 }
 430
 431                 /* Always use 32-bit address if it is valid (non-null) */
 432
 433                 if (address32) {
 434                         /*
 435                          * Copy the 32-bit address to the 64-bit GAS structure. The
 436                          * Space ID is always I/O for 32-bit legacy address fields
 437                         */
 438                         acpi_tb_init_generic_address(address64,
 439                                                      ACPI_ADR_SPACE_SYSTEM_IO,
 440                                                      *ACPI_ADD_PTR(u8,
 441                                                                    &acpi_gbl_FADT,
 442                                                                    fadt_info_table
 443                                                                    [i].length),
 444                                                      (u64) address32);
 445                 }
 446         }
 447 }
 448
 449 /*******************************************************************************
 450  *
 451  * FUNCTION:    acpi_tb_validate_fadt
 452  *
 453  * PARAMETERS:  Table           - Pointer to the FADT to be validated
 454  *
 455  * RETURN:      None
 456  *
 457  * DESCRIPTION: Validate various important fields within the FADT. If a problem
 458  *              is found, issue a message, but no status is returned.
 459  *              Used by both the table manager and the disassembler.
 460  *
 461  * Possible additional checks:
 462  * (acpi_gbl_FADT.pm1_event_length >= 4)
 463  * (acpi_gbl_FADT.pm1_control_length >= 2)
 464  * (acpi_gbl_FADT.pm_timer_length >= 4)
 465  * Gpe block lengths must be multiple of 2
 466  *
 467  ******************************************************************************/
 468
 469 static void acpi_tb_validate_fadt(void)
 470 {
 471         char *name;
 472         struct acpi_generic_address *address64;
 473         u8 length;
 474         u32 i;
 475
 476         /*
 477          * Check for FACS and DSDT address mismatches. An address mismatch between
 478          * the 32-bit and 64-bit address fields (FIRMWARE_CTRL/X_FIRMWARE_CTRL and
 479          * DSDT/X_DSDT) would indicate the presence of two FACS or two DSDT tables.
 480          */
 481         if (acpi_gbl_FADT.facs &&
 482             (acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) {
 483                 ACPI_WARNING((AE_INFO,
 484                               "32/64X FACS address mismatch in FADT - "
 485                               "%8.8X/%8.8X%8.8X, using 32",
 486                               acpi_gbl_FADT.facs,
 487                               ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xfacs)));
 488
 489                 acpi_gbl_FADT.Xfacs = (u64) acpi_gbl_FADT.facs;
 490         }
 491
 492         if (acpi_gbl_FADT.dsdt &&
 493             (acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) {
 494                 ACPI_WARNING((AE_INFO,
 495                               "32/64X DSDT address mismatch in FADT - "
 496                               "%8.8X/%8.8X%8.8X, using 32",
 497                               acpi_gbl_FADT.dsdt,
 498                               ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xdsdt)));
 499
 500                 acpi_gbl_FADT.Xdsdt = (u64) acpi_gbl_FADT.dsdt;
 501         }
 502
 503         /* Examine all of the 64-bit extended address fields (X fields) */
 504
 505         for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
 506                 /*
 507                  * Generate pointer to the 64-bit address, get the register
 508                  * length (width) and the register name
 509                  */
 510                 address64 = ACPI_ADD_PTR(struct acpi_generic_address,
 511                                          &acpi_gbl_FADT,
 512                                          fadt_info_table[i].address64);
 513                 length =
 514                     *ACPI_ADD_PTR(u8, &acpi_gbl_FADT,
 515                                   fadt_info_table[i].length);
 516                 name = fadt_info_table[i].name;
 517
 518                 /*
 519                  * For each extended field, check for length mismatch between the
 520                  * legacy length field and the corresponding 64-bit X length field.
 521                  */
 522                 if (address64->address &&
 523                     (address64->bit_width != ACPI_MUL_8(length))) {
 524                         ACPI_WARNING((AE_INFO,
 525                                       "32/64X length mismatch in %s: %d/%d",
 526                                       name, ACPI_MUL_8(length),
 527                                       address64->bit_width));
 528                 }
 529
 530                 if (fadt_info_table[i].type & ACPI_FADT_REQUIRED) {
 531                         /*
 532                          * Field is required (Pm1a_event, Pm1a_control, pm_timer).
 533                          * Both the address and length must be non-zero.
 534                          */
 535                         if (!address64->address || !length) {
 536                                 ACPI_ERROR((AE_INFO,
 537                                             "Required field %s has zero address and/or length:"
 538                                             " %8.8X%8.8X/%X",
 539                                             name,
 540                                             ACPI_FORMAT_UINT64(address64->
 541                                                                address),
 542                                             length));
 543                         }
 544                 } else if (fadt_info_table[i].type & ACPI_FADT_SEPARATE_LENGTH) {
 545                         /*
 546                          * Field is optional (PM2Control, GPE0, GPE1) AND has its own
 547                          * length field. If present, both the address and length must
 548                          * be valid.
 549                          */
 550                         if ((address64->address && !length) ||
 551                             (!address64->address && length)) {
 552                                 ACPI_WARNING((AE_INFO,
 553                                               "Optional field %s has zero address or length: "
 554                                               "%8.8X%8.8X/%X",
 555                                               name,
 556                                               ACPI_FORMAT_UINT64(address64->
 557                                                                  address),
 558                                               length));
 559                         }
 560                 }
 561         }
 562 }
 563
 564 /*******************************************************************************
 565  *
 566  * FUNCTION:    acpi_tb_setup_fadt_registers
 567  *
 568  * PARAMETERS:  None, uses acpi_gbl_FADT.
 569  *
 570  * RETURN:      None
 571  *
 572  * DESCRIPTION: Initialize global ACPI PM1 register definitions. Optionally,
 573  *              force FADT register definitions to their default lengths.
 574  *
 575  ******************************************************************************/
 576
 577 static void acpi_tb_setup_fadt_registers(void)
 578 {
 579         struct acpi_generic_address *target64;
 580         struct acpi_generic_address *source64;
 581         u8 pm1_register_byte_width;
 582         u32 i;
 583
 584         /*
 585          * Optionally check all register lengths against the default values and
 586          * update them if they are incorrect.
 587          */
 588         if (acpi_gbl_use_default_register_widths) {
 589                 for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
 590                         target64 =
 591                             ACPI_ADD_PTR(struct acpi_generic_address,
 592                                          &acpi_gbl_FADT,
 593                                          fadt_info_table[i].address64);
 594
 595                         /*
 596                          * If a valid register (Address != 0) and the (default_length > 0)
 597                          * (Not a GPE register), then check the width against the default.
 598                          */
 599                         if ((target64->address) &&
 600                             (fadt_info_table[i].default_length > 0) &&
 601                             (fadt_info_table[i].default_length !=
 602                              target64->bit_width)) {
 603                                 ACPI_WARNING((AE_INFO,
 604                                               "Invalid length for %s: %d, using default %d",
 605                                               fadt_info_table[i].name,
 606                                               target64->bit_width,
 607                                               fadt_info_table[i].
 608                                               default_length));
 609
 610                                 /* Incorrect size, set width to the default */
 611
 612                                 target64->bit_width =
 613                                     fadt_info_table[i].default_length;
 614                         }
 615                 }
 616         }
 617
 618         /*
 619          * Get the length of the individual PM1 registers (enable and status).
 620          * Each register is defined to be (event block length / 2). Extra divide
 621          * by 8 converts bits to bytes.
 622          */
 623         pm1_register_byte_width = (u8)
 624             ACPI_DIV_16(acpi_gbl_FADT.xpm1a_event_block.bit_width);
 625
 626         /*
 627          * Calculate separate GAS structs for the PM1x (A/B) Status and Enable
 628          * registers. These addresses do not appear (directly) in the FADT, so it
 629          * is useful to pre-calculate them from the PM1 Event Block definitions.
 630          *
 631          * The PM event blocks are split into two register blocks, first is the
 632          * PM Status Register block, followed immediately by the PM Enable
 633          * Register block. Each is of length (pm1_event_length/2)
 634          *
 635          * Note: The PM1A event block is required by the ACPI specification.
 636          * However, the PM1B event block is optional and is rarely, if ever,
 637          * used.
 638          */
 639
 640         for (i = 0; i < ACPI_FADT_PM_INFO_ENTRIES; i++) {
 641                 source64 =
 642                     ACPI_ADD_PTR(struct acpi_generic_address, &acpi_gbl_FADT,
 643                                  fadt_pm_info_table[i].source);
 644
 645                 if (source64->address) {
 646                         acpi_tb_init_generic_address(fadt_pm_info_table[i].
 647                                                      target, source64->space_id,
 648                                                      pm1_register_byte_width,
 649                                                      source64->address +
 650                                                      (fadt_pm_info_table[i].
 651                                                       register_num *
 652                                                       pm1_register_byte_width));
 653                 }
 654         }
 655 }