drivers/acpi/acpica/evgpe.c

   1 /******************************************************************************
   2  *
   3  * Module Name: evgpe - General Purpose Event handling and dispatch
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2011, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acevents.h"
  47 #include "acnamesp.h"
  48
  49 #define _COMPONENT          ACPI_EVENTS
  50 ACPI_MODULE_NAME("evgpe")
  51
  52 /* Local prototypes */
  53 static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context);
  54
  55 static void ACPI_SYSTEM_XFACE acpi_ev_asynch_enable_gpe(void *context);
  56
  57 /*******************************************************************************
  58  *
  59  * FUNCTION:    acpi_ev_update_gpe_enable_mask
  60  *
  61  * PARAMETERS:  gpe_event_info          - GPE to update
  62  *
  63  * RETURN:      Status
  64  *
  65  * DESCRIPTION: Updates GPE register enable mask based upon whether there are
  66  *              runtime references to this GPE
  67  *
  68  ******************************************************************************/
  69
  70 acpi_status
  71 acpi_ev_update_gpe_enable_mask(struct acpi_gpe_event_info *gpe_event_info)
  72 {
  73         struct acpi_gpe_register_info *gpe_register_info;
  74         u32 register_bit;
  75
  76         ACPI_FUNCTION_TRACE(ev_update_gpe_enable_mask);
  77
  78         gpe_register_info = gpe_event_info->register_info;
  79         if (!gpe_register_info) {
  80                 return_ACPI_STATUS(AE_NOT_EXIST);
  81         }
  82
  83         register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info,
  84                                                 gpe_register_info);
  85
  86         /* Clear the run bit up front */
  87
  88         ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit);
  89
  90         /* Set the mask bit only if there are references to this GPE */
  91
  92         if (gpe_event_info->runtime_count) {
  93                 ACPI_SET_BIT(gpe_register_info->enable_for_run, (u8)register_bit);
  94         }
  95
  96         return_ACPI_STATUS(AE_OK);
  97 }
  98
  99 /*******************************************************************************
 100  *
 101  * FUNCTION:    acpi_ev_enable_gpe
 102  *
 103  * PARAMETERS:  gpe_event_info  - GPE to enable
 104  *
 105  * RETURN:      Status
 106  *
 107  * DESCRIPTION: Clear a GPE of stale events and enable it.
 108  *
 109  ******************************************************************************/
 110 acpi_status
 111 acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
 112 {
 113         acpi_status status;
 114
 115         ACPI_FUNCTION_TRACE(ev_enable_gpe);
 116
 117         /*
 118          * We will only allow a GPE to be enabled if it has either an associated
 119          * method (_Lxx/_Exx) or a handler, or is using the implicit notify
 120          * feature. Otherwise, the GPE will be immediately disabled by
 121          * acpi_ev_gpe_dispatch the first time it fires.
 122          */
 123         if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
 124             ACPI_GPE_DISPATCH_NONE) {
 125                 return_ACPI_STATUS(AE_NO_HANDLER);
 126         }
 127
 128         /* Clear the GPE (of stale events) */
 129         status = acpi_hw_clear_gpe(gpe_event_info);
 130         if (ACPI_FAILURE(status)) {
 131                 return_ACPI_STATUS(status);
 132         }
 133
 134         /* Enable the requested GPE */
 135         status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
 136
 137         return_ACPI_STATUS(status);
 138 }
 139
 140
 141 /*******************************************************************************
 142  *
 143  * FUNCTION:    acpi_ev_add_gpe_reference
 144  *
 145  * PARAMETERS:  gpe_event_info          - Add a reference to this GPE
 146  *
 147  * RETURN:      Status
 148  *
 149  * DESCRIPTION: Add a reference to a GPE. On the first reference, the GPE is
 150  *              hardware-enabled.
 151  *
 152  ******************************************************************************/
 153
 154 acpi_status acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
 155 {
 156         acpi_status status = AE_OK;
 157
 158         ACPI_FUNCTION_TRACE(ev_add_gpe_reference);
 159
 160         if (gpe_event_info->runtime_count == ACPI_UINT8_MAX) {
 161                 return_ACPI_STATUS(AE_LIMIT);
 162         }
 163
 164         gpe_event_info->runtime_count++;
 165         if (gpe_event_info->runtime_count == 1) {
 166
 167                 /* Enable on first reference */
 168
 169                 status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
 170                 if (ACPI_SUCCESS(status)) {
 171                         status = acpi_ev_enable_gpe(gpe_event_info);
 172                 }
 173
 174                 if (ACPI_FAILURE(status)) {
 175                         gpe_event_info->runtime_count--;
 176                 }
 177         }
 178
 179         return_ACPI_STATUS(status);
 180 }
 181
 182 /*******************************************************************************
 183  *
 184  * FUNCTION:    acpi_ev_remove_gpe_reference
 185  *
 186  * PARAMETERS:  gpe_event_info          - Remove a reference to this GPE
 187  *
 188  * RETURN:      Status
 189  *
 190  * DESCRIPTION: Remove a reference to a GPE. When the last reference is
 191  *              removed, the GPE is hardware-disabled.
 192  *
 193  ******************************************************************************/
 194
 195 acpi_status acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
 196 {
 197         acpi_status status = AE_OK;
 198
 199         ACPI_FUNCTION_TRACE(ev_remove_gpe_reference);
 200
 201         if (!gpe_event_info->runtime_count) {
 202                 return_ACPI_STATUS(AE_LIMIT);
 203         }
 204
 205         gpe_event_info->runtime_count--;
 206         if (!gpe_event_info->runtime_count) {
 207
 208                 /* Disable on last reference */
 209
 210                 status = acpi_ev_update_gpe_enable_mask(gpe_event_info);
 211                 if (ACPI_SUCCESS(status)) {
 212                         status = acpi_hw_low_set_gpe(gpe_event_info,
 213                                                      ACPI_GPE_DISABLE);
 214                 }
 215
 216                 if (ACPI_FAILURE(status)) {
 217                         gpe_event_info->runtime_count++;
 218                 }
 219         }
 220
 221         return_ACPI_STATUS(status);
 222 }
 223
 224 /*******************************************************************************
 225  *
 226  * FUNCTION:    acpi_ev_low_get_gpe_info
 227  *
 228  * PARAMETERS:  gpe_number          - Raw GPE number
 229  *              gpe_block           - A GPE info block
 230  *
 231  * RETURN:      A GPE event_info struct. NULL if not a valid GPE (The gpe_number
 232  *              is not within the specified GPE block)
 233  *
 234  * DESCRIPTION: Returns the event_info struct associated with this GPE. This is
 235  *              the low-level implementation of ev_get_gpe_event_info.
 236  *
 237  ******************************************************************************/
 238
 239 struct acpi_gpe_event_info *acpi_ev_low_get_gpe_info(u32 gpe_number,
 240                                                      struct acpi_gpe_block_info
 241                                                      *gpe_block)
 242 {
 243         u32 gpe_index;
 244
 245         /*
 246          * Validate that the gpe_number is within the specified gpe_block.
 247          * (Two steps)
 248          */
 249         if (!gpe_block || (gpe_number < gpe_block->block_base_number)) {
 250                 return (NULL);
 251         }
 252
 253         gpe_index = gpe_number - gpe_block->block_base_number;
 254         if (gpe_index >= gpe_block->gpe_count) {
 255                 return (NULL);
 256         }
 257
 258         return (&gpe_block->event_info[gpe_index]);
 259 }
 260
 261
 262 /*******************************************************************************
 263  *
 264  * FUNCTION:    acpi_ev_get_gpe_event_info
 265  *
 266  * PARAMETERS:  gpe_device          - Device node. NULL for GPE0/GPE1
 267  *              gpe_number          - Raw GPE number
 268  *
 269  * RETURN:      A GPE event_info struct. NULL if not a valid GPE
 270  *
 271  * DESCRIPTION: Returns the event_info struct associated with this GPE.
 272  *              Validates the gpe_block and the gpe_number
 273  *
 274  *              Should be called only when the GPE lists are semaphore locked
 275  *              and not subject to change.
 276  *
 277  ******************************************************************************/
 278
 279 struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device,
 280                                                        u32 gpe_number)
 281 {
 282         union acpi_operand_object *obj_desc;
 283         struct acpi_gpe_event_info *gpe_info;
 284         u32 i;
 285
 286         ACPI_FUNCTION_ENTRY();
 287
 288         /* A NULL gpe_device means use the FADT-defined GPE block(s) */
 289
 290         if (!gpe_device) {
 291
 292                 /* Examine GPE Block 0 and 1 (These blocks are permanent) */
 293
 294                 for (i = 0; i < ACPI_MAX_GPE_BLOCKS; i++) {
 295                         gpe_info = acpi_ev_low_get_gpe_info(gpe_number,
 296                                                             acpi_gbl_gpe_fadt_blocks
 297                                                             [i]);
 298                         if (gpe_info) {
 299                                 return (gpe_info);
 300                         }
 301                 }
 302
 303                 /* The gpe_number was not in the range of either FADT GPE block */
 304
 305                 return (NULL);
 306         }
 307
 308         /* A Non-NULL gpe_device means this is a GPE Block Device */
 309
 310         obj_desc = acpi_ns_get_attached_object((struct acpi_namespace_node *)
 311                                                gpe_device);
 312         if (!obj_desc || !obj_desc->device.gpe_block) {
 313                 return (NULL);
 314         }
 315
 316         return (acpi_ev_low_get_gpe_info
 317                 (gpe_number, obj_desc->device.gpe_block));
 318 }
 319
 320 /*******************************************************************************
 321  *
 322  * FUNCTION:    acpi_ev_gpe_detect
 323  *
 324  * PARAMETERS:  gpe_xrupt_list      - Interrupt block for this interrupt.
 325  *                                    Can have multiple GPE blocks attached.
 326  *
 327  * RETURN:      INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED
 328  *
 329  * DESCRIPTION: Detect if any GP events have occurred. This function is
 330  *              executed at interrupt level.
 331  *
 332  ******************************************************************************/
 333
 334 u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list)
 335 {
 336         acpi_status status;
 337         struct acpi_gpe_block_info *gpe_block;
 338         struct acpi_gpe_register_info *gpe_register_info;
 339         u32 int_status = ACPI_INTERRUPT_NOT_HANDLED;
 340         u8 enabled_status_byte;
 341         u32 status_reg;
 342         u32 enable_reg;
 343         acpi_cpu_flags flags;
 344         u32 i;
 345         u32 j;
 346
 347         ACPI_FUNCTION_NAME(ev_gpe_detect);
 348
 349         /* Check for the case where there are no GPEs */
 350
 351         if (!gpe_xrupt_list) {
 352                 return (int_status);
 353         }
 354
 355         /*
 356          * We need to obtain the GPE lock for both the data structs and registers
 357          * Note: Not necessary to obtain the hardware lock, since the GPE
 358          * registers are owned by the gpe_lock.
 359          */
 360         flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
 361
 362         /* Examine all GPE blocks attached to this interrupt level */
 363
 364         gpe_block = gpe_xrupt_list->gpe_block_list_head;
 365         while (gpe_block) {
 366                 /*
 367                  * Read all of the 8-bit GPE status and enable registers in this GPE
 368                  * block, saving all of them. Find all currently active GP events.
 369                  */
 370                 for (i = 0; i < gpe_block->register_count; i++) {
 371
 372                         /* Get the next status/enable pair */
 373
 374                         gpe_register_info = &gpe_block->register_info[i];
 375
 376                         /*
 377                          * Optimization: If there are no GPEs enabled within this
 378                          * register, we can safely ignore the entire register.
 379                          */
 380                         if (!(gpe_register_info->enable_for_run |
 381                               gpe_register_info->enable_for_wake)) {
 382                                 continue;
 383                         }
 384
 385                         /* Read the Status Register */
 386
 387                         status =
 388                             acpi_hw_read(&status_reg,
 389                                          &gpe_register_info->status_address);
 390                         if (ACPI_FAILURE(status)) {
 391                                 goto unlock_and_exit;
 392                         }
 393
 394                         /* Read the Enable Register */
 395
 396                         status =
 397                             acpi_hw_read(&enable_reg,
 398                                          &gpe_register_info->enable_address);
 399                         if (ACPI_FAILURE(status)) {
 400                                 goto unlock_and_exit;
 401                         }
 402
 403                         ACPI_DEBUG_PRINT((ACPI_DB_INTERRUPTS,
 404                                           "Read GPE Register at GPE%02X: Status=%02X, Enable=%02X\n",
 405                                           gpe_register_info->base_gpe_number,
 406                                           status_reg, enable_reg));
 407
 408                         /* Check if there is anything active at all in this register */
 409
 410                         enabled_status_byte = (u8) (status_reg & enable_reg);
 411                         if (!enabled_status_byte) {
 412
 413                                 /* No active GPEs in this register, move on */
 414
 415                                 continue;
 416                         }
 417
 418                         /* Now look at the individual GPEs in this byte register */
 419
 420                         for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
 421
 422                                 /* Examine one GPE bit */
 423
 424                                 if (enabled_status_byte & (1 << j)) {
 425                                         /*
 426                                          * Found an active GPE. Dispatch the event to a handler
 427                                          * or method.
 428                                          */
 429                                         int_status |=
 430                                             acpi_ev_gpe_dispatch(gpe_block->
 431                                                                  node,
 432                                                                  &gpe_block->
 433                                                 event_info[((acpi_size) i * ACPI_GPE_REGISTER_WIDTH) + j], j + gpe_register_info->base_gpe_number);
 434                                 }
 435                         }
 436                 }
 437
 438                 gpe_block = gpe_block->next;
 439         }
 440
 441       unlock_and_exit:
 442
 443         acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
 444         return (int_status);
 445 }
 446
 447 /*******************************************************************************
 448  *
 449  * FUNCTION:    acpi_ev_asynch_execute_gpe_method
 450  *
 451  * PARAMETERS:  Context (gpe_event_info) - Info for this GPE
 452  *
 453  * RETURN:      None
 454  *
 455  * DESCRIPTION: Perform the actual execution of a GPE control method. This
 456  *              function is called from an invocation of acpi_os_execute and
 457  *              therefore does NOT execute at interrupt level - so that
 458  *              the control method itself is not executed in the context of
 459  *              an interrupt handler.
 460  *
 461  ******************************************************************************/
 462
 463 static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
 464 {
 465         struct acpi_gpe_event_info *gpe_event_info = context;
 466         acpi_status status;
 467         struct acpi_gpe_event_info *local_gpe_event_info;
 468         struct acpi_evaluate_info *info;
 469         struct acpi_gpe_notify_object *notify_object;
 470
 471         ACPI_FUNCTION_TRACE(ev_asynch_execute_gpe_method);
 472
 473         /* Allocate a local GPE block */
 474
 475         local_gpe_event_info =
 476             ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_event_info));
 477         if (!local_gpe_event_info) {
 478                 ACPI_EXCEPTION((AE_INFO, AE_NO_MEMORY, "while handling a GPE"));
 479                 return_VOID;
 480         }
 481
 482         status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
 483         if (ACPI_FAILURE(status)) {
 484                 ACPI_FREE(local_gpe_event_info);
 485                 return_VOID;
 486         }
 487
 488         /* Must revalidate the gpe_number/gpe_block */
 489
 490         if (!acpi_ev_valid_gpe_event(gpe_event_info)) {
 491                 status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
 492                 ACPI_FREE(local_gpe_event_info);
 493                 return_VOID;
 494         }
 495
 496         /*
 497          * Take a snapshot of the GPE info for this level - we copy the info to
 498          * prevent a race condition with remove_handler/remove_block.
 499          */
 500         ACPI_MEMCPY(local_gpe_event_info, gpe_event_info,
 501                     sizeof(struct acpi_gpe_event_info));
 502
 503         status = acpi_ut_release_mutex(ACPI_MTX_EVENTS);
 504         if (ACPI_FAILURE(status)) {
 505                 return_VOID;
 506         }
 507
 508         /* Do the correct dispatch - normal method or implicit notify */
 509
 510         switch (local_gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) {
 511         case ACPI_GPE_DISPATCH_NOTIFY:
 512
 513                 /*
 514                  * Implicit notify.
 515                  * Dispatch a DEVICE_WAKE notify to the appropriate handler.
 516                  * NOTE: the request is queued for execution after this method
 517                  * completes. The notify handlers are NOT invoked synchronously
 518                  * from this thread -- because handlers may in turn run other
 519                  * control methods.
 520                  */
 521                 status = acpi_ev_queue_notify_request(
 522                                 local_gpe_event_info->dispatch.device.node,
 523                                 ACPI_NOTIFY_DEVICE_WAKE);
 524
 525                 notify_object = local_gpe_event_info->dispatch.device.next;
 526                 while (ACPI_SUCCESS(status) && notify_object) {
 527                         status = acpi_ev_queue_notify_request(
 528                                         notify_object->node,
 529                                         ACPI_NOTIFY_DEVICE_WAKE);
 530                         notify_object = notify_object->next;
 531                 }
 532
 533                 break;
 534
 535         case ACPI_GPE_DISPATCH_METHOD:
 536
 537                 /* Allocate the evaluation information block */
 538
 539                 info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
 540                 if (!info) {
 541                         status = AE_NO_MEMORY;
 542                 } else {
 543                         /*
 544                          * Invoke the GPE Method (_Lxx, _Exx) i.e., evaluate the _Lxx/_Exx
 545                          * control method that corresponds to this GPE
 546                          */
 547                         info->prefix_node =
 548                             local_gpe_event_info->dispatch.method_node;
 549                         info->flags = ACPI_IGNORE_RETURN_VALUE;
 550
 551                         status = acpi_ns_evaluate(info);
 552                         ACPI_FREE(info);
 553                 }
 554
 555                 if (ACPI_FAILURE(status)) {
 556                         ACPI_EXCEPTION((AE_INFO, status,
 557                                         "while evaluating GPE method [%4.4s]",
 558                                         acpi_ut_get_node_name
 559                                         (local_gpe_event_info->dispatch.
 560                                          method_node)));
 561                 }
 562
 563                 break;
 564
 565         default:
 566                 return_VOID;    /* Should never happen */
 567         }
 568
 569         /* Defer enabling of GPE until all notify handlers are done */
 570
 571         status = acpi_os_execute(OSL_NOTIFY_HANDLER,
 572                                  acpi_ev_asynch_enable_gpe,
 573                                  local_gpe_event_info);
 574         if (ACPI_FAILURE(status)) {
 575                 ACPI_FREE(local_gpe_event_info);
 576         }
 577         return_VOID;
 578 }
 579
 580
 581 /*******************************************************************************
 582  *
 583  * FUNCTION:    acpi_ev_asynch_enable_gpe
 584  *
 585  * PARAMETERS:  Context (gpe_event_info) - Info for this GPE
 586  *              Callback from acpi_os_execute
 587  *
 588  * RETURN:      None
 589  *
 590  * DESCRIPTION: Asynchronous clear/enable for GPE. This allows the GPE to
 591  *              complete (i.e., finish execution of Notify)
 592  *
 593  ******************************************************************************/
 594
 595 static void ACPI_SYSTEM_XFACE acpi_ev_asynch_enable_gpe(void *context)
 596 {
 597         struct acpi_gpe_event_info *gpe_event_info = context;
 598
 599         (void)acpi_ev_finish_gpe(gpe_event_info);
 600
 601         ACPI_FREE(gpe_event_info);
 602         return;
 603 }
 604
 605
 606 /*******************************************************************************
 607  *
 608  * FUNCTION:    acpi_ev_finish_gpe
 609  *
 610  * PARAMETERS:  gpe_event_info      - Info for this GPE
 611  *
 612  * RETURN:      Status
 613  *
 614  * DESCRIPTION: Clear/Enable a GPE. Common code that is used after execution
 615  *              of a GPE method or a synchronous or asynchronous GPE handler.
 616  *
 617  ******************************************************************************/
 618
 619 acpi_status acpi_ev_finish_gpe(struct acpi_gpe_event_info *gpe_event_info)
 620 {
 621         acpi_status status;
 622
 623         if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) ==
 624             ACPI_GPE_LEVEL_TRIGGERED) {
 625                 /*
 626                  * GPE is level-triggered, we clear the GPE status bit after
 627                  * handling the event.
 628                  */
 629                 status = acpi_hw_clear_gpe(gpe_event_info);
 630                 if (ACPI_FAILURE(status)) {
 631                         return (status);
 632                 }
 633         }
 634
 635         /*
 636          * Enable this GPE, conditionally. This means that the GPE will
 637          * only be physically enabled if the enable_for_run bit is set
 638          * in the event_info.
 639          */
 640         (void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_CONDITIONAL_ENABLE);
 641         return (AE_OK);
 642 }
 643
 644
 645 /*******************************************************************************
 646  *
 647  * FUNCTION:    acpi_ev_gpe_dispatch
 648  *
 649  * PARAMETERS:  gpe_device      - Device node. NULL for GPE0/GPE1
 650  *              gpe_event_info  - Info for this GPE
 651  *              gpe_number      - Number relative to the parent GPE block
 652  *
 653  * RETURN:      INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED
 654  *
 655  * DESCRIPTION: Dispatch a General Purpose Event to either a function (e.g. EC)
 656  *              or method (e.g. _Lxx/_Exx) handler.
 657  *
 658  *              This function executes at interrupt level.
 659  *
 660  ******************************************************************************/
 661
 662 u32
 663 acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device,
 664                     struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
 665 {
 666         acpi_status status;
 667         u32 return_value;
 668
 669         ACPI_FUNCTION_TRACE(ev_gpe_dispatch);
 670
 671         /* Invoke global event handler if present */
 672
 673         acpi_gpe_count++;
 674         if (acpi_gbl_global_event_handler) {
 675                 acpi_gbl_global_event_handler(ACPI_EVENT_TYPE_GPE, gpe_device,
 676                                               gpe_number,
 677                                               acpi_gbl_global_event_handler_context);
 678         }
 679
 680         /*
 681          * If edge-triggered, clear the GPE status bit now. Note that
 682          * level-triggered events are cleared after the GPE is serviced.
 683          */
 684         if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) ==
 685             ACPI_GPE_EDGE_TRIGGERED) {
 686                 status = acpi_hw_clear_gpe(gpe_event_info);
 687                 if (ACPI_FAILURE(status)) {
 688                         ACPI_EXCEPTION((AE_INFO, status,
 689                                         "Unable to clear GPE%02X", gpe_number));
 690                         return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
 691                 }
 692         }
 693
 694         /*
 695          * Always disable the GPE so that it does not keep firing before
 696          * any asynchronous activity completes (either from the execution
 697          * of a GPE method or an asynchronous GPE handler.)
 698          *
 699          * If there is no handler or method to run, just disable the
 700          * GPE and leave it disabled permanently to prevent further such
 701          * pointless events from firing.
 702          */
 703         status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
 704         if (ACPI_FAILURE(status)) {
 705                 ACPI_EXCEPTION((AE_INFO, status,
 706                                 "Unable to disable GPE%02X", gpe_number));
 707                 return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
 708         }
 709
 710         /*
 711          * Dispatch the GPE to either an installed handler or the control
 712          * method associated with this GPE (_Lxx or _Exx). If a handler
 713          * exists, we invoke it and do not attempt to run the method.
 714          * If there is neither a handler nor a method, leave the GPE
 715          * disabled.
 716          */
 717         switch (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) {
 718         case ACPI_GPE_DISPATCH_HANDLER:
 719
 720                 /* Invoke the installed handler (at interrupt level) */
 721
 722                 return_value =
 723                     gpe_event_info->dispatch.handler->address(gpe_device,
 724                                                               gpe_number,
 725                                                               gpe_event_info->
 726                                                               dispatch.handler->
 727                                                               context);
 728
 729                 /* If requested, clear (if level-triggered) and reenable the GPE */
 730
 731                 if (return_value & ACPI_REENABLE_GPE) {
 732                         (void)acpi_ev_finish_gpe(gpe_event_info);
 733                 }
 734                 break;
 735
 736         case ACPI_GPE_DISPATCH_METHOD:
 737         case ACPI_GPE_DISPATCH_NOTIFY:
 738
 739                 /*
 740                  * Execute the method associated with the GPE
 741                  * NOTE: Level-triggered GPEs are cleared after the method completes.
 742                  */
 743                 status = acpi_os_execute(OSL_GPE_HANDLER,
 744                                          acpi_ev_asynch_execute_gpe_method,
 745                                          gpe_event_info);
 746                 if (ACPI_FAILURE(status)) {
 747                         ACPI_EXCEPTION((AE_INFO, status,
 748                                         "Unable to queue handler for GPE%2X - event disabled",
 749                                         gpe_number));
 750                 }
 751                 break;
 752
 753         default:
 754
 755                 /*
 756                  * No handler or method to run!
 757                  * 03/2010: This case should no longer be possible. We will not allow
 758                  * a GPE to be enabled if it has no handler or method.
 759                  */
 760                 ACPI_ERROR((AE_INFO,
 761                             "No handler or method for GPE%02X, disabling event",
 762                             gpe_number));
 763
 764                 break;
 765         }
 766
 767         return_UINT32(ACPI_INTERRUPT_HANDLED);
 768 }