arch/x86_64/kernel/io_apic.c

   1 /*
   2  *      Intel IO-APIC support for multi-Pentium hosts.
   3  *
   4  *      Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo
   5  *
   6  *      Many thanks to Stig Venaas for trying out countless experimental
   7  *      patches and reporting/debugging problems patiently!
   8  *
   9  *      (c) 1999, Multiple IO-APIC support, developed by
  10  *      Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and
  11  *      Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>,
  12  *      further tested and cleaned up by Zach Brown <zab@redhat.com>
  13  *      and Ingo Molnar <mingo@redhat.com>
  14  *
  15  *      Fixes
  16  *      Maciej W. Rozycki       :       Bits for genuine 82489DX APICs;
  17  *                                      thanks to Eric Gilmore
  18  *                                      and Rolf G. Tews
  19  *                                      for testing these extensively
  20  *      Paul Diefenbaugh        :       Added full ACPI support
  21  */
  22
  23 #include <linux/mm.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/init.h>
  26 #include <linux/delay.h>
  27 #include <linux/sched.h>
  28 #include <linux/smp_lock.h>
  29 #include <linux/pci.h>
  30 #include <linux/mc146818rtc.h>
  31 #include <linux/acpi.h>
  32 #include <linux/sysdev.h>
  33 #include <linux/msi.h>
  34 #include <linux/htirq.h>
  35 #ifdef CONFIG_ACPI
  36 #include <acpi/acpi_bus.h>
  37 #endif
  38
  39 #include <asm/io.h>
  40 #include <asm/smp.h>
  41 #include <asm/desc.h>
  42 #include <asm/proto.h>
  43 #include <asm/mach_apic.h>
  44 #include <asm/acpi.h>
  45 #include <asm/dma.h>
  46 #include <asm/nmi.h>
  47 #include <asm/msidef.h>
  48 #include <asm/hypertransport.h>
  49
  50 static int assign_irq_vector(int irq, cpumask_t mask);
  51
  52 #define __apicdebuginit  __init
  53
  54 int sis_apic_bug; /* not actually supported, dummy for compile */
  55
  56 static int no_timer_check;
  57
  58 static int disable_timer_pin_1 __initdata;
  59
  60 int timer_over_8254 __initdata = 0;
  61
  62 /* Where if anywhere is the i8259 connect in external int mode */
  63 static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
  64
  65 static DEFINE_SPINLOCK(ioapic_lock);
  66 static DEFINE_SPINLOCK(vector_lock);
  67
  68 /*
  69  * # of IRQ routing registers
  70  */
  71 int nr_ioapic_registers[MAX_IO_APICS];
  72
  73 /*
  74  * Rough estimation of how many shared IRQs there are, can
  75  * be changed anytime.
  76  */
  77 #define MAX_PLUS_SHARED_IRQS NR_IRQ_VECTORS
  78 #define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS)
  79
  80 /*
  81  * This is performance-critical, we want to do it O(1)
  82  *
  83  * the indexing order of this array favors 1:1 mappings
  84  * between pins and IRQs.
  85  */
  86
  87 static struct irq_pin_list {
  88         short apic, pin, next;
  89 } irq_2_pin[PIN_MAP_SIZE];
  90
  91 #define __DO_ACTION(R, ACTION, FINAL)                                   \
  92                                                                         \
  93 {                                                                       \
  94         int pin;                                                        \
  95         struct irq_pin_list *entry = irq_2_pin + irq;                   \
  96                                                                         \
  97         BUG_ON(irq >= NR_IRQS);                                         \
  98         for (;;) {                                                      \
  99                 unsigned int reg;                                       \
 100                 pin = entry->pin;                                       \
 101                 if (pin == -1)                                          \
 102                         break;                                          \
 103                 reg = io_apic_read(entry->apic, 0x10 + R + pin*2);      \
 104                 reg ACTION;                                             \
 105                 io_apic_modify(entry->apic, reg);                       \
 106                 if (!entry->next)                                       \
 107                         break;                                          \
 108                 entry = irq_2_pin + entry->next;                        \
 109         }                                                               \
 110         FINAL;                                                          \
 111 }
 112
 113 union entry_union {
 114         struct { u32 w1, w2; };
 115         struct IO_APIC_route_entry entry;
 116 };
 117
 118 static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin)
 119 {
 120         union entry_union eu;
 121         unsigned long flags;
 122         spin_lock_irqsave(&ioapic_lock, flags);
 123         eu.w1 = io_apic_read(apic, 0x10 + 2 * pin);
 124         eu.w2 = io_apic_read(apic, 0x11 + 2 * pin);
 125         spin_unlock_irqrestore(&ioapic_lock, flags);
 126         return eu.entry;
 127 }
 128
 129 static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e)
 130 {
 131         unsigned long flags;
 132         union entry_union eu;
 133         eu.entry = e;
 134         spin_lock_irqsave(&ioapic_lock, flags);
 135         io_apic_write(apic, 0x10 + 2*pin, eu.w1);
 136         io_apic_write(apic, 0x11 + 2*pin, eu.w2);
 137         spin_unlock_irqrestore(&ioapic_lock, flags);
 138 }
 139
 140 #ifdef CONFIG_SMP
 141 static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector)
 142 {
 143         int apic, pin;
 144         struct irq_pin_list *entry = irq_2_pin + irq;
 145
 146         BUG_ON(irq >= NR_IRQS);
 147         for (;;) {
 148                 unsigned int reg;
 149                 apic = entry->apic;
 150                 pin = entry->pin;
 151                 if (pin == -1)
 152                         break;
 153                 io_apic_write(apic, 0x11 + pin*2, dest);
 154                 reg = io_apic_read(apic, 0x10 + pin*2);
 155                 reg &= ~0x000000ff;
 156                 reg |= vector;
 157                 io_apic_modify(apic, reg);
 158                 if (!entry->next)
 159                         break;
 160                 entry = irq_2_pin + entry->next;
 161         }
 162 }
 163
 164 static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
 165 {
 166         unsigned long flags;
 167         unsigned int dest;
 168         cpumask_t tmp;
 169         int vector;
 170
 171         cpus_and(tmp, mask, cpu_online_map);
 172         if (cpus_empty(tmp))
 173                 tmp = TARGET_CPUS;
 174
 175         cpus_and(mask, tmp, CPU_MASK_ALL);
 176
 177         vector = assign_irq_vector(irq, mask);
 178         if (vector < 0)
 179                 return;
 180
 181         cpus_clear(tmp);
 182         cpu_set(vector >> 8, tmp);
 183         dest = cpu_mask_to_apicid(tmp);
 184
 185         /*
 186          * Only the high 8 bits are valid.
 187          */
 188         dest = SET_APIC_LOGICAL_ID(dest);
 189
 190         spin_lock_irqsave(&ioapic_lock, flags);
 191         __target_IO_APIC_irq(irq, dest, vector & 0xff);
 192         set_native_irq_info(irq, mask);
 193         spin_unlock_irqrestore(&ioapic_lock, flags);
 194 }
 195 #endif
 196
 197 /*
 198  * The common case is 1:1 IRQ<->pin mappings. Sometimes there are
 199  * shared ISA-space IRQs, so we have to support them. We are super
 200  * fast in the common case, and fast for shared ISA-space IRQs.
 201  */
 202 static void add_pin_to_irq(unsigned int irq, int apic, int pin)
 203 {
 204         static int first_free_entry = NR_IRQS;
 205         struct irq_pin_list *entry = irq_2_pin + irq;
 206
 207         BUG_ON(irq >= NR_IRQS);
 208         while (entry->next)
 209                 entry = irq_2_pin + entry->next;
 210
 211         if (entry->pin != -1) {
 212                 entry->next = first_free_entry;
 213                 entry = irq_2_pin + entry->next;
 214                 if (++first_free_entry >= PIN_MAP_SIZE)
 215                         panic("io_apic.c: ran out of irq_2_pin entries!");
 216         }
 217         entry->apic = apic;
 218         entry->pin = pin;
 219 }
 220
 221
 222 #define DO_ACTION(name,R,ACTION, FINAL)                                 \
 223                                                                         \
 224         static void name##_IO_APIC_irq (unsigned int irq)               \
 225         __DO_ACTION(R, ACTION, FINAL)
 226
 227 DO_ACTION( __mask,             0, |= 0x00010000, io_apic_sync(entry->apic) )
 228                                                 /* mask = 1 */
 229 DO_ACTION( __unmask,           0, &= 0xfffeffff, )
 230                                                 /* mask = 0 */
 231
 232 static void mask_IO_APIC_irq (unsigned int irq)
 233 {
 234         unsigned long flags;
 235
 236         spin_lock_irqsave(&ioapic_lock, flags);
 237         __mask_IO_APIC_irq(irq);
 238         spin_unlock_irqrestore(&ioapic_lock, flags);
 239 }
 240
 241 static void unmask_IO_APIC_irq (unsigned int irq)
 242 {
 243         unsigned long flags;
 244
 245         spin_lock_irqsave(&ioapic_lock, flags);
 246         __unmask_IO_APIC_irq(irq);
 247         spin_unlock_irqrestore(&ioapic_lock, flags);
 248 }
 249
 250 static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
 251 {
 252         struct IO_APIC_route_entry entry;
 253
 254         /* Check delivery_mode to be sure we're not clearing an SMI pin */
 255         entry = ioapic_read_entry(apic, pin);
 256         if (entry.delivery_mode == dest_SMI)
 257                 return;
 258         /*
 259          * Disable it in the IO-APIC irq-routing table:
 260          */
 261         memset(&entry, 0, sizeof(entry));
 262         entry.mask = 1;
 263         ioapic_write_entry(apic, pin, entry);
 264 }
 265
 266 static void clear_IO_APIC (void)
 267 {
 268         int apic, pin;
 269
 270         for (apic = 0; apic < nr_ioapics; apic++)
 271                 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++)
 272                         clear_IO_APIC_pin(apic, pin);
 273 }
 274
 275 int skip_ioapic_setup;
 276 int ioapic_force;
 277
 278 /* dummy parsing: see setup.c */
 279
 280 static int __init disable_ioapic_setup(char *str)
 281 {
 282         skip_ioapic_setup = 1;
 283         return 0;
 284 }
 285 early_param("noapic", disable_ioapic_setup);
 286
 287 /* Actually the next is obsolete, but keep it for paranoid reasons -AK */
 288 static int __init disable_timer_pin_setup(char *arg)
 289 {
 290         disable_timer_pin_1 = 1;
 291         return 1;
 292 }
 293 __setup("disable_timer_pin_1", disable_timer_pin_setup);
 294
 295 static int __init setup_disable_8254_timer(char *s)
 296 {
 297         timer_over_8254 = -1;
 298         return 1;
 299 }
 300 static int __init setup_enable_8254_timer(char *s)
 301 {
 302         timer_over_8254 = 2;
 303         return 1;
 304 }
 305
 306 __setup("disable_8254_timer", setup_disable_8254_timer);
 307 __setup("enable_8254_timer", setup_enable_8254_timer);
 308
 309
 310 /*
 311  * Find the IRQ entry number of a certain pin.
 312  */
 313 static int find_irq_entry(int apic, int pin, int type)
 314 {
 315         int i;
 316
 317         for (i = 0; i < mp_irq_entries; i++)
 318                 if (mp_irqs[i].mpc_irqtype == type &&
 319                     (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid ||
 320                      mp_irqs[i].mpc_dstapic == MP_APIC_ALL) &&
 321                     mp_irqs[i].mpc_dstirq == pin)
 322                         return i;
 323
 324         return -1;
 325 }
 326
 327 /*
 328  * Find the pin to which IRQ[irq] (ISA) is connected
 329  */
 330 static int __init find_isa_irq_pin(int irq, int type)
 331 {
 332         int i;
 333
 334         for (i = 0; i < mp_irq_entries; i++) {
 335                 int lbus = mp_irqs[i].mpc_srcbus;
 336
 337                 if (test_bit(lbus, mp_bus_not_pci) &&
 338                     (mp_irqs[i].mpc_irqtype == type) &&
 339                     (mp_irqs[i].mpc_srcbusirq == irq))
 340
 341                         return mp_irqs[i].mpc_dstirq;
 342         }
 343         return -1;
 344 }
 345
 346 static int __init find_isa_irq_apic(int irq, int type)
 347 {
 348         int i;
 349
 350         for (i = 0; i < mp_irq_entries; i++) {
 351                 int lbus = mp_irqs[i].mpc_srcbus;
 352
 353                 if (test_bit(lbus, mp_bus_not_pci) &&
 354                     (mp_irqs[i].mpc_irqtype == type) &&
 355                     (mp_irqs[i].mpc_srcbusirq == irq))
 356                         break;
 357         }
 358         if (i < mp_irq_entries) {
 359                 int apic;
 360                 for(apic = 0; apic < nr_ioapics; apic++) {
 361                         if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic)
 362                                 return apic;
 363                 }
 364         }
 365
 366         return -1;
 367 }
 368
 369 /*
 370  * Find a specific PCI IRQ entry.
 371  * Not an __init, possibly needed by modules
 372  */
 373 static int pin_2_irq(int idx, int apic, int pin);
 374
 375 int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
 376 {
 377         int apic, i, best_guess = -1;
 378
 379         apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
 380                 bus, slot, pin);
 381         if (mp_bus_id_to_pci_bus[bus] == -1) {
 382                 apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
 383                 return -1;
 384         }
 385         for (i = 0; i < mp_irq_entries; i++) {
 386                 int lbus = mp_irqs[i].mpc_srcbus;
 387
 388                 for (apic = 0; apic < nr_ioapics; apic++)
 389                         if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic ||
 390                             mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
 391                                 break;
 392
 393                 if (!test_bit(lbus, mp_bus_not_pci) &&
 394                     !mp_irqs[i].mpc_irqtype &&
 395                     (bus == lbus) &&
 396                     (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
 397                         int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq);
 398
 399                         if (!(apic || IO_APIC_IRQ(irq)))
 400                                 continue;
 401
 402                         if (pin == (mp_irqs[i].mpc_srcbusirq & 3))
 403                                 return irq;
 404                         /*
 405                          * Use the first all-but-pin matching entry as a
 406                          * best-guess fuzzy result for broken mptables.
 407                          */
 408                         if (best_guess < 0)
 409                                 best_guess = irq;
 410                 }
 411         }
 412         BUG_ON(best_guess >= NR_IRQS);
 413         return best_guess;
 414 }
 415
 416 /* ISA interrupts are always polarity zero edge triggered,
 417  * when listed as conforming in the MP table. */
 418
 419 #define default_ISA_trigger(idx)        (0)
 420 #define default_ISA_polarity(idx)       (0)
 421
 422 /* PCI interrupts are always polarity one level triggered,
 423  * when listed as conforming in the MP table. */
 424
 425 #define default_PCI_trigger(idx)        (1)
 426 #define default_PCI_polarity(idx)       (1)
 427
 428 static int __init MPBIOS_polarity(int idx)
 429 {
 430         int bus = mp_irqs[idx].mpc_srcbus;
 431         int polarity;
 432
 433         /*
 434          * Determine IRQ line polarity (high active or low active):
 435          */
 436         switch (mp_irqs[idx].mpc_irqflag & 3)
 437         {
 438                 case 0: /* conforms, ie. bus-type dependent polarity */
 439                         if (test_bit(bus, mp_bus_not_pci))
 440                                 polarity = default_ISA_polarity(idx);
 441                         else
 442                                 polarity = default_PCI_polarity(idx);
 443                         break;
 444                 case 1: /* high active */
 445                 {
 446                         polarity = 0;
 447                         break;
 448                 }
 449                 case 2: /* reserved */
 450                 {
 451                         printk(KERN_WARNING "broken BIOS!!\n");
 452                         polarity = 1;
 453                         break;
 454                 }
 455                 case 3: /* low active */
 456                 {
 457                         polarity = 1;
 458                         break;
 459                 }
 460                 default: /* invalid */
 461                 {
 462                         printk(KERN_WARNING "broken BIOS!!\n");
 463                         polarity = 1;
 464                         break;
 465                 }
 466         }
 467         return polarity;
 468 }
 469
 470 static int MPBIOS_trigger(int idx)
 471 {
 472         int bus = mp_irqs[idx].mpc_srcbus;
 473         int trigger;
 474
 475         /*
 476          * Determine IRQ trigger mode (edge or level sensitive):
 477          */
 478         switch ((mp_irqs[idx].mpc_irqflag>>2) & 3)
 479         {
 480                 case 0: /* conforms, ie. bus-type dependent */
 481                         if (test_bit(bus, mp_bus_not_pci))
 482                                 trigger = default_ISA_trigger(idx);
 483                         else
 484                                 trigger = default_PCI_trigger(idx);
 485                         break;
 486                 case 1: /* edge */
 487                 {
 488                         trigger = 0;
 489                         break;
 490                 }
 491                 case 2: /* reserved */
 492                 {
 493                         printk(KERN_WARNING "broken BIOS!!\n");
 494                         trigger = 1;
 495                         break;
 496                 }
 497                 case 3: /* level */
 498                 {
 499                         trigger = 1;
 500                         break;
 501                 }
 502                 default: /* invalid */
 503                 {
 504                         printk(KERN_WARNING "broken BIOS!!\n");
 505                         trigger = 0;
 506                         break;
 507                 }
 508         }
 509         return trigger;
 510 }
 511
 512 static inline int irq_polarity(int idx)
 513 {
 514         return MPBIOS_polarity(idx);
 515 }
 516
 517 static inline int irq_trigger(int idx)
 518 {
 519         return MPBIOS_trigger(idx);
 520 }
 521
 522 static int pin_2_irq(int idx, int apic, int pin)
 523 {
 524         int irq, i;
 525         int bus = mp_irqs[idx].mpc_srcbus;
 526
 527         /*
 528          * Debugging check, we are in big trouble if this message pops up!
 529          */
 530         if (mp_irqs[idx].mpc_dstirq != pin)
 531                 printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
 532
 533         if (test_bit(bus, mp_bus_not_pci)) {
 534                 irq = mp_irqs[idx].mpc_srcbusirq;
 535         } else {
 536                 /*
 537                  * PCI IRQs are mapped in order
 538                  */
 539                 i = irq = 0;
 540                 while (i < apic)
 541                         irq += nr_ioapic_registers[i++];
 542                 irq += pin;
 543         }
 544         BUG_ON(irq >= NR_IRQS);
 545         return irq;
 546 }
 547
 548 static inline int IO_APIC_irq_trigger(int irq)
 549 {
 550         int apic, idx, pin;
 551
 552         for (apic = 0; apic < nr_ioapics; apic++) {
 553                 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
 554                         idx = find_irq_entry(apic,pin,mp_INT);
 555                         if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin)))
 556                                 return irq_trigger(idx);
 557                 }
 558         }
 559         /*
 560          * nonexistent IRQs are edge default
 561          */
 562         return 0;
 563 }
 564
 565 /* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */
 566 unsigned int irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_EXTERNAL_VECTOR, 0 };
 567
 568 static int __assign_irq_vector(int irq, cpumask_t mask)
 569 {
 570         /*
 571          * NOTE! The local APIC isn't very good at handling
 572          * multiple interrupts at the same interrupt level.
 573          * As the interrupt level is determined by taking the
 574          * vector number and shifting that right by 4, we
 575          * want to spread these out a bit so that they don't
 576          * all fall in the same interrupt level.
 577          *
 578          * Also, we've got to be careful not to trash gate
 579          * 0x80, because int 0x80 is hm, kind of importantish. ;)
 580          */
 581         static struct {
 582                 int vector;
 583                 int offset;
 584         } pos[NR_CPUS] = { [ 0 ... NR_CPUS - 1] = {FIRST_DEVICE_VECTOR, 0} };
 585         int old_vector = -1;
 586         int cpu;
 587
 588         BUG_ON((unsigned)irq >= NR_IRQ_VECTORS);
 589
 590         if (IO_APIC_VECTOR(irq) > 0)
 591                 old_vector = IO_APIC_VECTOR(irq);
 592         if ((old_vector > 0) && cpu_isset(old_vector >> 8, mask)) {
 593                 return old_vector;
 594         }
 595
 596         for_each_cpu_mask(cpu, mask) {
 597                 int vector, offset;
 598                 vector = pos[cpu].vector;
 599                 offset = pos[cpu].offset;
 600 next:
 601                 vector += 8;
 602                 if (vector >= FIRST_SYSTEM_VECTOR) {
 603                         /* If we run out of vectors on large boxen, must share them. */
 604                         offset = (offset + 1) % 8;
 605                         vector = FIRST_DEVICE_VECTOR + offset;
 606                 }
 607                 if (unlikely(pos[cpu].vector == vector))
 608                         continue;
 609                 if (vector == IA32_SYSCALL_VECTOR)
 610                         goto next;
 611                 if (per_cpu(vector_irq, cpu)[vector] != -1)
 612                         goto next;
 613                 /* Found one! */
 614                 pos[cpu].vector = vector;
 615                 pos[cpu].offset = offset;
 616                 if (old_vector >= 0) {
 617                         int old_cpu = old_vector >> 8;
 618                         old_vector &= 0xff;
 619                         per_cpu(vector_irq, old_cpu)[old_vector] = -1;
 620                 }
 621                 per_cpu(vector_irq, cpu)[vector] = irq;
 622                 vector |= cpu << 8;
 623                 IO_APIC_VECTOR(irq) = vector;
 624                 return vector;
 625         }
 626         return -ENOSPC;
 627 }
 628
 629 static int assign_irq_vector(int irq, cpumask_t mask)
 630 {
 631         int vector;
 632         unsigned long flags;
 633
 634         spin_lock_irqsave(&vector_lock, flags);
 635         vector = __assign_irq_vector(irq, mask);
 636         spin_unlock_irqrestore(&vector_lock, flags);
 637         return vector;
 638 }
 639
 640 extern void (*interrupt[NR_IRQS])(void);
 641
 642 static struct irq_chip ioapic_chip;
 643
 644 #define IOAPIC_AUTO     -1
 645 #define IOAPIC_EDGE     0
 646 #define IOAPIC_LEVEL    1
 647
 648 static void ioapic_register_intr(int irq, int vector, unsigned long trigger)
 649 {
 650         if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
 651                         trigger == IOAPIC_LEVEL)
 652                 set_irq_chip_and_handler(irq, &ioapic_chip,
 653                                          handle_fasteoi_irq);
 654         else
 655                 set_irq_chip_and_handler(irq, &ioapic_chip,
 656                                          handle_edge_irq);
 657 }
 658
 659 static void __init setup_IO_APIC_irqs(void)
 660 {
 661         struct IO_APIC_route_entry entry;
 662         int apic, pin, idx, irq, first_notcon = 1, vector;
 663         unsigned long flags;
 664
 665         apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
 666
 667         for (apic = 0; apic < nr_ioapics; apic++) {
 668         for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
 669
 670                 /*
 671                  * add it to the IO-APIC irq-routing table:
 672                  */
 673                 memset(&entry,0,sizeof(entry));
 674
 675                 entry.delivery_mode = INT_DELIVERY_MODE;
 676                 entry.dest_mode = INT_DEST_MODE;
 677                 entry.mask = 0;                         /* enable IRQ */
 678                 entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
 679
 680                 idx = find_irq_entry(apic,pin,mp_INT);
 681                 if (idx == -1) {
 682                         if (first_notcon) {
 683                                 apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin);
 684                                 first_notcon = 0;
 685                         } else
 686                                 apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mpc_apicid, pin);
 687                         continue;
 688                 }
 689
 690                 entry.trigger = irq_trigger(idx);
 691                 entry.polarity = irq_polarity(idx);
 692
 693                 if (irq_trigger(idx)) {
 694                         entry.trigger = 1;
 695                         entry.mask = 1;
 696                         entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
 697                 }
 698
 699                 irq = pin_2_irq(idx, apic, pin);
 700                 add_pin_to_irq(irq, apic, pin);
 701
 702                 if (!apic && !IO_APIC_IRQ(irq))
 703                         continue;
 704
 705                 if (IO_APIC_IRQ(irq)) {
 706                         cpumask_t mask;
 707                         vector = assign_irq_vector(irq, TARGET_CPUS);
 708                         if (vector < 0)
 709                                 continue;
 710
 711                         cpus_clear(mask);
 712                         cpu_set(vector >> 8, mask);
 713                         entry.dest.logical.logical_dest = cpu_mask_to_apicid(mask);
 714                         entry.vector = vector & 0xff;
 715
 716                         ioapic_register_intr(irq, vector, IOAPIC_AUTO);
 717                         if (!apic && (irq < 16))
 718                                 disable_8259A_irq(irq);
 719                 }
 720                 ioapic_write_entry(apic, pin, entry);
 721
 722                 spin_lock_irqsave(&ioapic_lock, flags);
 723                 set_native_irq_info(irq, TARGET_CPUS);
 724                 spin_unlock_irqrestore(&ioapic_lock, flags);
 725         }
 726         }
 727
 728         if (!first_notcon)
 729                 apic_printk(APIC_VERBOSE," not connected.\n");
 730 }
 731
 732 /*
 733  * Set up the 8259A-master output pin as broadcast to all
 734  * CPUs.
 735  */
 736 static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
 737 {
 738         struct IO_APIC_route_entry entry;
 739         unsigned long flags;
 740
 741         memset(&entry,0,sizeof(entry));
 742
 743         disable_8259A_irq(0);
 744
 745         /* mask LVT0 */
 746         apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 747
 748         /*
 749          * We use logical delivery to get the timer IRQ
 750          * to the first CPU.
 751          */
 752         entry.dest_mode = INT_DEST_MODE;
 753         entry.mask = 0;                                 /* unmask IRQ now */
 754         entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
 755         entry.delivery_mode = INT_DELIVERY_MODE;
 756         entry.polarity = 0;
 757         entry.trigger = 0;
 758         entry.vector = vector;
 759
 760         /*
 761          * The timer IRQ doesn't have to know that behind the
 762          * scene we have a 8259A-master in AEOI mode ...
 763          */
 764         set_irq_chip_and_handler(0, &ioapic_chip, handle_edge_irq);
 765
 766         /*
 767          * Add it to the IO-APIC irq-routing table:
 768          */
 769         spin_lock_irqsave(&ioapic_lock, flags);
 770         io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
 771         io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
 772         spin_unlock_irqrestore(&ioapic_lock, flags);
 773
 774         enable_8259A_irq(0);
 775 }
 776
 777 void __init UNEXPECTED_IO_APIC(void)
 778 {
 779 }
 780
 781 void __apicdebuginit print_IO_APIC(void)
 782 {
 783         int apic, i;
 784         union IO_APIC_reg_00 reg_00;
 785         union IO_APIC_reg_01 reg_01;
 786         union IO_APIC_reg_02 reg_02;
 787         unsigned long flags;
 788
 789         if (apic_verbosity == APIC_QUIET)
 790                 return;
 791
 792         printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries);
 793         for (i = 0; i < nr_ioapics; i++)
 794                 printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n",
 795                        mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]);
 796
 797         /*
 798          * We are a bit conservative about what we expect.  We have to
 799          * know about every hardware change ASAP.
 800          */
 801         printk(KERN_INFO "testing the IO APIC.......................\n");
 802
 803         for (apic = 0; apic < nr_ioapics; apic++) {
 804
 805         spin_lock_irqsave(&ioapic_lock, flags);
 806         reg_00.raw = io_apic_read(apic, 0);
 807         reg_01.raw = io_apic_read(apic, 1);
 808         if (reg_01.bits.version >= 0x10)
 809                 reg_02.raw = io_apic_read(apic, 2);
 810         spin_unlock_irqrestore(&ioapic_lock, flags);
 811
 812         printk("\n");
 813         printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid);
 814         printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
 815         printk(KERN_DEBUG ".......    : physical APIC id: %02X\n", reg_00.bits.ID);
 816         if (reg_00.bits.__reserved_1 || reg_00.bits.__reserved_2)
 817                 UNEXPECTED_IO_APIC();
 818
 819         printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)&reg_01);
 820         printk(KERN_DEBUG ".......     : max redirection entries: %04X\n", reg_01.bits.entries);
 821         if (    (reg_01.bits.entries != 0x0f) && /* older (Neptune) boards */
 822                 (reg_01.bits.entries != 0x17) && /* typical ISA+PCI boards */
 823                 (reg_01.bits.entries != 0x1b) && /* Compaq Proliant boards */
 824                 (reg_01.bits.entries != 0x1f) && /* dual Xeon boards */
 825                 (reg_01.bits.entries != 0x22) && /* bigger Xeon boards */
 826                 (reg_01.bits.entries != 0x2E) &&
 827                 (reg_01.bits.entries != 0x3F) &&
 828                 (reg_01.bits.entries != 0x03)
 829         )
 830                 UNEXPECTED_IO_APIC();
 831
 832         printk(KERN_DEBUG ".......     : PRQ implemented: %X\n", reg_01.bits.PRQ);
 833         printk(KERN_DEBUG ".......     : IO APIC version: %04X\n", reg_01.bits.version);
 834         if (    (reg_01.bits.version != 0x01) && /* 82489DX IO-APICs */
 835                 (reg_01.bits.version != 0x02) && /* 82801BA IO-APICs (ICH2) */
 836                 (reg_01.bits.version != 0x10) && /* oldest IO-APICs */
 837                 (reg_01.bits.version != 0x11) && /* Pentium/Pro IO-APICs */
 838                 (reg_01.bits.version != 0x13) && /* Xeon IO-APICs */
 839                 (reg_01.bits.version != 0x20)    /* Intel P64H (82806 AA) */
 840         )
 841                 UNEXPECTED_IO_APIC();
 842         if (reg_01.bits.__reserved_1 || reg_01.bits.__reserved_2)
 843                 UNEXPECTED_IO_APIC();
 844
 845         if (reg_01.bits.version >= 0x10) {
 846                 printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw);
 847                 printk(KERN_DEBUG ".......     : arbitration: %02X\n", reg_02.bits.arbitration);
 848                 if (reg_02.bits.__reserved_1 || reg_02.bits.__reserved_2)
 849                         UNEXPECTED_IO_APIC();
 850         }
 851
 852         printk(KERN_DEBUG ".... IRQ redirection table:\n");
 853
 854         printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol"
 855                           " Stat Dest Deli Vect:   \n");
 856
 857         for (i = 0; i <= reg_01.bits.entries; i++) {
 858                 struct IO_APIC_route_entry entry;
 859
 860                 entry = ioapic_read_entry(apic, i);
 861
 862                 printk(KERN_DEBUG " %02x %03X %02X  ",
 863                         i,
 864                         entry.dest.logical.logical_dest,
 865                         entry.dest.physical.physical_dest
 866                 );
 867
 868                 printk("%1d    %1d    %1d   %1d   %1d    %1d    %1d    %02X\n",
 869                         entry.mask,
 870                         entry.trigger,
 871                         entry.irr,
 872                         entry.polarity,
 873                         entry.delivery_status,
 874                         entry.dest_mode,
 875                         entry.delivery_mode,
 876                         entry.vector
 877                 );
 878         }
 879         }
 880         printk(KERN_DEBUG "IRQ to pin mappings:\n");
 881         for (i = 0; i < NR_IRQS; i++) {
 882                 struct irq_pin_list *entry = irq_2_pin + i;
 883                 if (entry->pin < 0)
 884                         continue;
 885                 printk(KERN_DEBUG "IRQ%d ", i);
 886                 for (;;) {
 887                         printk("-> %d:%d", entry->apic, entry->pin);
 888                         if (!entry->next)
 889                                 break;
 890                         entry = irq_2_pin + entry->next;
 891                 }
 892                 printk("\n");
 893         }
 894
 895         printk(KERN_INFO ".................................... done.\n");
 896
 897         return;
 898 }
 899
 900 #if 0
 901
 902 static __apicdebuginit void print_APIC_bitfield (int base)
 903 {
 904         unsigned int v;
 905         int i, j;
 906
 907         if (apic_verbosity == APIC_QUIET)
 908                 return;
 909
 910         printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG);
 911         for (i = 0; i < 8; i++) {
 912                 v = apic_read(base + i*0x10);
 913                 for (j = 0; j < 32; j++) {
 914                         if (v & (1<<j))
 915                                 printk("1");
 916                         else
 917                                 printk("0");
 918                 }
 919                 printk("\n");
 920         }
 921 }
 922
 923 void __apicdebuginit print_local_APIC(void * dummy)
 924 {
 925         unsigned int v, ver, maxlvt;
 926
 927         if (apic_verbosity == APIC_QUIET)
 928                 return;
 929
 930         printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 931                 smp_processor_id(), hard_smp_processor_id());
 932         v = apic_read(APIC_ID);
 933         printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, GET_APIC_ID(v));
 934         v = apic_read(APIC_LVR);
 935         printk(KERN_INFO "... APIC VERSION: %08x\n", v);
 936         ver = GET_APIC_VERSION(v);
 937         maxlvt = get_maxlvt();
 938
 939         v = apic_read(APIC_TASKPRI);
 940         printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK);
 941
 942         v = apic_read(APIC_ARBPRI);
 943         printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
 944                 v & APIC_ARBPRI_MASK);
 945         v = apic_read(APIC_PROCPRI);
 946         printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
 947
 948         v = apic_read(APIC_EOI);
 949         printk(KERN_DEBUG "... APIC EOI: %08x\n", v);
 950         v = apic_read(APIC_RRR);
 951         printk(KERN_DEBUG "... APIC RRR: %08x\n", v);
 952         v = apic_read(APIC_LDR);
 953         printk(KERN_DEBUG "... APIC LDR: %08x\n", v);
 954         v = apic_read(APIC_DFR);
 955         printk(KERN_DEBUG "... APIC DFR: %08x\n", v);
 956         v = apic_read(APIC_SPIV);
 957         printk(KERN_DEBUG "... APIC SPIV: %08x\n", v);
 958
 959         printk(KERN_DEBUG "... APIC ISR field:\n");
 960         print_APIC_bitfield(APIC_ISR);
 961         printk(KERN_DEBUG "... APIC TMR field:\n");
 962         print_APIC_bitfield(APIC_TMR);
 963         printk(KERN_DEBUG "... APIC IRR field:\n");
 964         print_APIC_bitfield(APIC_IRR);
 965
 966         v = apic_read(APIC_ESR);
 967         printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
 968
 969         v = apic_read(APIC_ICR);
 970         printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
 971         v = apic_read(APIC_ICR2);
 972         printk(KERN_DEBUG "... APIC ICR2: %08x\n", v);
 973
 974         v = apic_read(APIC_LVTT);
 975         printk(KERN_DEBUG "... APIC LVTT: %08x\n", v);
 976
 977         if (maxlvt > 3) {                       /* PC is LVT#4. */
 978                 v = apic_read(APIC_LVTPC);
 979                 printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v);
 980         }
 981         v = apic_read(APIC_LVT0);
 982         printk(KERN_DEBUG "... APIC LVT0: %08x\n", v);
 983         v = apic_read(APIC_LVT1);
 984         printk(KERN_DEBUG "... APIC LVT1: %08x\n", v);
 985
 986         if (maxlvt > 2) {                       /* ERR is LVT#3. */
 987                 v = apic_read(APIC_LVTERR);
 988                 printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v);
 989         }
 990
 991         v = apic_read(APIC_TMICT);
 992         printk(KERN_DEBUG "... APIC TMICT: %08x\n", v);
 993         v = apic_read(APIC_TMCCT);
 994         printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
 995         v = apic_read(APIC_TDCR);
 996         printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
 997         printk("\n");
 998 }
 999
1000 void print_all_local_APICs (void)
1001 {
1002         on_each_cpu(print_local_APIC, NULL, 1, 1);
1003 }
1004
1005 void __apicdebuginit print_PIC(void)
1006 {
1007         unsigned int v;
1008         unsigned long flags;
1009
1010         if (apic_verbosity == APIC_QUIET)
1011                 return;
1012
1013         printk(KERN_DEBUG "\nprinting PIC contents\n");
1014
1015         spin_lock_irqsave(&i8259A_lock, flags);
1016
1017         v = inb(0xa1) << 8 | inb(0x21);
1018         printk(KERN_DEBUG "... PIC  IMR: %04x\n", v);
1019
1020         v = inb(0xa0) << 8 | inb(0x20);
1021         printk(KERN_DEBUG "... PIC  IRR: %04x\n", v);
1022
1023         outb(0x0b,0xa0);
1024         outb(0x0b,0x20);
1025         v = inb(0xa0) << 8 | inb(0x20);
1026         outb(0x0a,0xa0);
1027         outb(0x0a,0x20);
1028
1029         spin_unlock_irqrestore(&i8259A_lock, flags);
1030
1031         printk(KERN_DEBUG "... PIC  ISR: %04x\n", v);
1032
1033         v = inb(0x4d1) << 8 | inb(0x4d0);
1034         printk(KERN_DEBUG "... PIC ELCR: %04x\n", v);
1035 }
1036
1037 #endif  /*  0  */
1038
1039 static void __init enable_IO_APIC(void)
1040 {
1041         union IO_APIC_reg_01 reg_01;
1042         int i8259_apic, i8259_pin;
1043         int i, apic;
1044         unsigned long flags;
1045
1046         for (i = 0; i < PIN_MAP_SIZE; i++) {
1047                 irq_2_pin[i].pin = -1;
1048                 irq_2_pin[i].next = 0;
1049         }
1050
1051         /*
1052          * The number of IO-APIC IRQ registers (== #pins):
1053          */
1054         for (apic = 0; apic < nr_ioapics; apic++) {
1055                 spin_lock_irqsave(&ioapic_lock, flags);
1056                 reg_01.raw = io_apic_read(apic, 1);
1057                 spin_unlock_irqrestore(&ioapic_lock, flags);
1058                 nr_ioapic_registers[apic] = reg_01.bits.entries+1;
1059         }
1060         for(apic = 0; apic < nr_ioapics; apic++) {
1061                 int pin;
1062                 /* See if any of the pins is in ExtINT mode */
1063                 for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) {
1064                         struct IO_APIC_route_entry entry;
1065                         entry = ioapic_read_entry(apic, pin);
1066
1067                         /* If the interrupt line is enabled and in ExtInt mode
1068                          * I have found the pin where the i8259 is connected.
1069                          */
1070                         if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) {
1071                                 ioapic_i8259.apic = apic;
1072                                 ioapic_i8259.pin  = pin;
1073                                 goto found_i8259;
1074                         }
1075                 }
1076         }
1077  found_i8259:
1078         /* Look to see what if the MP table has reported the ExtINT */
1079         i8259_pin  = find_isa_irq_pin(0, mp_ExtINT);
1080         i8259_apic = find_isa_irq_apic(0, mp_ExtINT);
1081         /* Trust the MP table if nothing is setup in the hardware */
1082         if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) {
1083                 printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n");
1084                 ioapic_i8259.pin  = i8259_pin;
1085                 ioapic_i8259.apic = i8259_apic;
1086         }
1087         /* Complain if the MP table and the hardware disagree */
1088         if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) &&
1089                 (i8259_pin >= 0) && (ioapic_i8259.pin >= 0))
1090         {
1091                 printk(KERN_WARNING "ExtINT in hardware and MP table differ\n");
1092         }
1093
1094         /*
1095          * Do not trust the IO-APIC being empty at bootup
1096          */
1097         clear_IO_APIC();
1098 }
1099
1100 /*
1101  * Not an __init, needed by the reboot code
1102  */
1103 void disable_IO_APIC(void)
1104 {
1105         /*
1106          * Clear the IO-APIC before rebooting:
1107          */
1108         clear_IO_APIC();
1109
1110         /*
1111          * If the i8259 is routed through an IOAPIC
1112          * Put that IOAPIC in virtual wire mode
1113          * so legacy interrupts can be delivered.
1114          */
1115         if (ioapic_i8259.pin != -1) {
1116                 struct IO_APIC_route_entry entry;
1117
1118                 memset(&entry, 0, sizeof(entry));
1119                 entry.mask            = 0; /* Enabled */
1120                 entry.trigger         = 0; /* Edge */
1121                 entry.irr             = 0;
1122                 entry.polarity        = 0; /* High */
1123                 entry.delivery_status = 0;
1124                 entry.dest_mode       = 0; /* Physical */
1125                 entry.delivery_mode   = dest_ExtINT; /* ExtInt */
1126                 entry.vector          = 0;
1127                 entry.dest.physical.physical_dest =
1128                                         GET_APIC_ID(apic_read(APIC_ID));
1129
1130                 /*
1131                  * Add it to the IO-APIC irq-routing table:
1132                  */
1133                 ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry);
1134         }
1135
1136         disconnect_bsp_APIC(ioapic_i8259.pin != -1);
1137 }
1138
1139 /*
1140  * There is a nasty bug in some older SMP boards, their mptable lies
1141  * about the timer IRQ. We do the following to work around the situation:
1142  *
1143  *      - timer IRQ defaults to IO-APIC IRQ
1144  *      - if this function detects that timer IRQs are defunct, then we fall
1145  *        back to ISA timer IRQs
1146  */
1147 static int __init timer_irq_works(void)
1148 {
1149         unsigned long t1 = jiffies;
1150
1151         local_irq_enable();
1152         /* Let ten ticks pass... */
1153         mdelay((10 * 1000) / HZ);
1154
1155         /*
1156          * Expect a few ticks at least, to be sure some possible
1157          * glue logic does not lock up after one or two first
1158          * ticks in a non-ExtINT mode.  Also the local APIC
1159          * might have cached one ExtINT interrupt.  Finally, at
1160          * least one tick may be lost due to delays.
1161          */
1162
1163         /* jiffies wrap? */
1164         if (jiffies - t1 > 4)
1165                 return 1;
1166         return 0;
1167 }
1168
1169 /*
1170  * In the SMP+IOAPIC case it might happen that there are an unspecified
1171  * number of pending IRQ events unhandled. These cases are very rare,
1172  * so we 'resend' these IRQs via IPIs, to the same CPU. It's much
1173  * better to do it this way as thus we do not have to be aware of
1174  * 'pending' interrupts in the IRQ path, except at this point.
1175  */
1176 /*
1177  * Edge triggered needs to resend any interrupt
1178  * that was delayed but this is now handled in the device
1179  * independent code.
1180  */
1181
1182 /*
1183  * Starting up a edge-triggered IO-APIC interrupt is
1184  * nasty - we need to make sure that we get the edge.
1185  * If it is already asserted for some reason, we need
1186  * return 1 to indicate that is was pending.
1187  *
1188  * This is not complete - we should be able to fake
1189  * an edge even if it isn't on the 8259A...
1190  */
1191
1192 static unsigned int startup_ioapic_irq(unsigned int irq)
1193 {
1194         int was_pending = 0;
1195         unsigned long flags;
1196
1197         spin_lock_irqsave(&ioapic_lock, flags);
1198         if (irq < 16) {
1199                 disable_8259A_irq(irq);
1200                 if (i8259A_irq_pending(irq))
1201                         was_pending = 1;
1202         }
1203         __unmask_IO_APIC_irq(irq);
1204         spin_unlock_irqrestore(&ioapic_lock, flags);
1205
1206         return was_pending;
1207 }
1208
1209 static int ioapic_retrigger_irq(unsigned int irq)
1210 {
1211         cpumask_t mask;
1212         unsigned vector;
1213
1214         vector = irq_vector[irq];
1215         cpus_clear(mask);
1216         cpu_set(vector >> 8, mask);
1217
1218         send_IPI_mask(mask, vector & 0xff);
1219
1220         return 1;
1221 }
1222
1223 /*
1224  * Level and edge triggered IO-APIC interrupts need different handling,
1225  * so we use two separate IRQ descriptors. Edge triggered IRQs can be
1226  * handled with the level-triggered descriptor, but that one has slightly
1227  * more overhead. Level-triggered interrupts cannot be handled with the
1228  * edge-triggered handler, without risking IRQ storms and other ugly
1229  * races.
1230  */
1231
1232 static void ack_apic_edge(unsigned int irq)
1233 {
1234         move_native_irq(irq);
1235         ack_APIC_irq();
1236 }
1237
1238 static void ack_apic_level(unsigned int irq)
1239 {
1240         int do_unmask_irq = 0;
1241
1242 #if defined(CONFIG_GENERIC_PENDING_IRQ) || defined(CONFIG_IRQBALANCE)
1243         /* If we are moving the irq we need to mask it */
1244         if (unlikely(irq_desc[irq].status & IRQ_MOVE_PENDING)) {
1245                 do_unmask_irq = 1;
1246                 mask_IO_APIC_irq(irq);
1247         }
1248 #endif
1249
1250         /*
1251          * We must acknowledge the irq before we move it or the acknowledge will
1252          * not propogate properly.
1253          */
1254         ack_APIC_irq();
1255
1256         /* Now we can move and renable the irq */
1257         move_masked_irq(irq);
1258         if (unlikely(do_unmask_irq))
1259                 unmask_IO_APIC_irq(irq);
1260 }
1261
1262 static struct irq_chip ioapic_chip __read_mostly = {
1263         .name           = "IO-APIC",
1264         .startup        = startup_ioapic_irq,
1265         .mask           = mask_IO_APIC_irq,
1266         .unmask         = unmask_IO_APIC_irq,
1267         .ack            = ack_apic_edge,
1268         .eoi            = ack_apic_level,
1269 #ifdef CONFIG_SMP
1270         .set_affinity   = set_ioapic_affinity_irq,
1271 #endif
1272         .retrigger      = ioapic_retrigger_irq,
1273 };
1274
1275 static inline void init_IO_APIC_traps(void)
1276 {
1277         int irq;
1278
1279         /*
1280          * NOTE! The local APIC isn't very good at handling
1281          * multiple interrupts at the same interrupt level.
1282          * As the interrupt level is determined by taking the
1283          * vector number and shifting that right by 4, we
1284          * want to spread these out a bit so that they don't
1285          * all fall in the same interrupt level.
1286          *
1287          * Also, we've got to be careful not to trash gate
1288          * 0x80, because int 0x80 is hm, kind of importantish. ;)
1289          */
1290         for (irq = 0; irq < NR_IRQS ; irq++) {
1291                 int tmp = irq;
1292                 if (IO_APIC_IRQ(tmp) && !IO_APIC_VECTOR(tmp)) {
1293                         /*
1294                          * Hmm.. We don't have an entry for this,
1295                          * so default to an old-fashioned 8259
1296                          * interrupt if we can..
1297                          */
1298                         if (irq < 16)
1299                                 make_8259A_irq(irq);
1300                         else
1301                                 /* Strange. Oh, well.. */
1302                                 irq_desc[irq].chip = &no_irq_chip;
1303                 }
1304         }
1305 }
1306
1307 static void enable_lapic_irq (unsigned int irq)
1308 {
1309         unsigned long v;
1310
1311         v = apic_read(APIC_LVT0);
1312         apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
1313 }
1314
1315 static void disable_lapic_irq (unsigned int irq)
1316 {
1317         unsigned long v;
1318
1319         v = apic_read(APIC_LVT0);
1320         apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
1321 }
1322
1323 static void ack_lapic_irq (unsigned int irq)
1324 {
1325         ack_APIC_irq();
1326 }
1327
1328 static void end_lapic_irq (unsigned int i) { /* nothing */ }
1329
1330 static struct hw_interrupt_type lapic_irq_type __read_mostly = {
1331         .typename = "local-APIC-edge",
1332         .startup = NULL, /* startup_irq() not used for IRQ0 */
1333         .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */
1334         .enable = enable_lapic_irq,
1335         .disable = disable_lapic_irq,
1336         .ack = ack_lapic_irq,
1337         .end = end_lapic_irq,
1338 };
1339
1340 static void setup_nmi (void)
1341 {
1342         /*
1343          * Dirty trick to enable the NMI watchdog ...
1344          * We put the 8259A master into AEOI mode and
1345          * unmask on all local APICs LVT0 as NMI.
1346          *
1347          * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
1348          * is from Maciej W. Rozycki - so we do not have to EOI from
1349          * the NMI handler or the timer interrupt.
1350          */
1351         printk(KERN_INFO "activating NMI Watchdog ...");
1352
1353         enable_NMI_through_LVT0(NULL);
1354
1355         printk(" done.\n");
1356 }
1357
1358 /*
1359  * This looks a bit hackish but it's about the only one way of sending
1360  * a few INTA cycles to 8259As and any associated glue logic.  ICR does
1361  * not support the ExtINT mode, unfortunately.  We need to send these
1362  * cycles as some i82489DX-based boards have glue logic that keeps the
1363  * 8259A interrupt line asserted until INTA.  --macro
1364  */
1365 static inline void unlock_ExtINT_logic(void)
1366 {
1367         int apic, pin, i;
1368         struct IO_APIC_route_entry entry0, entry1;
1369         unsigned char save_control, save_freq_select;
1370         unsigned long flags;
1371
1372         pin  = find_isa_irq_pin(8, mp_INT);
1373         apic = find_isa_irq_apic(8, mp_INT);
1374         if (pin == -1)
1375                 return;
1376
1377         spin_lock_irqsave(&ioapic_lock, flags);
1378         *(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
1379         *(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
1380         spin_unlock_irqrestore(&ioapic_lock, flags);
1381         clear_IO_APIC_pin(apic, pin);
1382
1383         memset(&entry1, 0, sizeof(entry1));
1384
1385         entry1.dest_mode = 0;                   /* physical delivery */
1386         entry1.mask = 0;                        /* unmask IRQ now */
1387         entry1.dest.physical.physical_dest = hard_smp_processor_id();
1388         entry1.delivery_mode = dest_ExtINT;
1389         entry1.polarity = entry0.polarity;
1390         entry1.trigger = 0;
1391         entry1.vector = 0;
1392
1393         spin_lock_irqsave(&ioapic_lock, flags);
1394         io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
1395         io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
1396         spin_unlock_irqrestore(&ioapic_lock, flags);
1397
1398         save_control = CMOS_READ(RTC_CONTROL);
1399         save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
1400         CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6,
1401                    RTC_FREQ_SELECT);
1402         CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL);
1403
1404         i = 100;
1405         while (i-- > 0) {
1406                 mdelay(10);
1407                 if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF)
1408                         i -= 10;
1409         }
1410
1411         CMOS_WRITE(save_control, RTC_CONTROL);
1412         CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
1413         clear_IO_APIC_pin(apic, pin);
1414
1415         spin_lock_irqsave(&ioapic_lock, flags);
1416         io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
1417         io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
1418         spin_unlock_irqrestore(&ioapic_lock, flags);
1419 }
1420
1421 /*
1422  * This code may look a bit paranoid, but it's supposed to cooperate with
1423  * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
1424  * is so screwy.  Thanks to Brian Perkins for testing/hacking this beast
1425  * fanatically on his truly buggy board.
1426  *
1427  * FIXME: really need to revamp this for modern platforms only.
1428  */
1429 static inline void check_timer(void)
1430 {
1431         int apic1, pin1, apic2, pin2;
1432         int vector;
1433
1434         /*
1435          * get/set the timer IRQ vector:
1436          */
1437         disable_8259A_irq(0);
1438         vector = assign_irq_vector(0, TARGET_CPUS);
1439
1440         /*
1441          * Subtle, code in do_timer_interrupt() expects an AEOI
1442          * mode for the 8259A whenever interrupts are routed
1443          * through I/O APICs.  Also IRQ0 has to be enabled in
1444          * the 8259A which implies the virtual wire has to be
1445          * disabled in the local APIC.
1446          */
1447         apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
1448         init_8259A(1);
1449         if (timer_over_8254 > 0)
1450                 enable_8259A_irq(0);
1451
1452         pin1  = find_isa_irq_pin(0, mp_INT);
1453         apic1 = find_isa_irq_apic(0, mp_INT);
1454         pin2  = ioapic_i8259.pin;
1455         apic2 = ioapic_i8259.apic;
1456
1457         apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
1458                 vector, apic1, pin1, apic2, pin2);
1459
1460         if (pin1 != -1) {
1461                 /*
1462                  * Ok, does IRQ0 through the IOAPIC work?
1463                  */
1464                 unmask_IO_APIC_irq(0);
1465                 if (!no_timer_check && timer_irq_works()) {
1466                         nmi_watchdog_default();
1467                         if (nmi_watchdog == NMI_IO_APIC) {
1468                                 disable_8259A_irq(0);
1469                                 setup_nmi();
1470                                 enable_8259A_irq(0);
1471                         }
1472                         if (disable_timer_pin_1 > 0)
1473                                 clear_IO_APIC_pin(0, pin1);
1474                         return;
1475                 }
1476                 clear_IO_APIC_pin(apic1, pin1);
1477                 apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not "
1478                                 "connected to IO-APIC\n");
1479         }
1480
1481         apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) "
1482                                 "through the 8259A ... ");
1483         if (pin2 != -1) {
1484                 apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...",
1485                         apic2, pin2);
1486                 /*
1487                  * legacy devices should be connected to IO APIC #0
1488                  */
1489                 setup_ExtINT_IRQ0_pin(apic2, pin2, vector);
1490                 if (timer_irq_works()) {
1491                         apic_printk(APIC_VERBOSE," works.\n");
1492                         nmi_watchdog_default();
1493                         if (nmi_watchdog == NMI_IO_APIC) {
1494                                 setup_nmi();
1495                         }
1496                         return;
1497                 }
1498                 /*
1499                  * Cleanup, just in case ...
1500                  */
1501                 clear_IO_APIC_pin(apic2, pin2);
1502         }
1503         apic_printk(APIC_VERBOSE," failed.\n");
1504
1505         if (nmi_watchdog == NMI_IO_APIC) {
1506                 printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
1507                 nmi_watchdog = 0;
1508         }
1509
1510         apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
1511
1512         disable_8259A_irq(0);
1513         irq_desc[0].chip = &lapic_irq_type;
1514         apic_write(APIC_LVT0, APIC_DM_FIXED | vector);  /* Fixed mode */
1515         enable_8259A_irq(0);
1516
1517         if (timer_irq_works()) {
1518                 apic_printk(APIC_VERBOSE," works.\n");
1519                 return;
1520         }
1521         apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
1522         apic_printk(APIC_VERBOSE," failed.\n");
1523
1524         apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ...");
1525
1526         init_8259A(0);
1527         make_8259A_irq(0);
1528         apic_write(APIC_LVT0, APIC_DM_EXTINT);
1529
1530         unlock_ExtINT_logic();
1531
1532         if (timer_irq_works()) {
1533                 apic_printk(APIC_VERBOSE," works.\n");
1534                 return;
1535         }
1536         apic_printk(APIC_VERBOSE," failed :(.\n");
1537         panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n");
1538 }
1539
1540 static int __init notimercheck(char *s)
1541 {
1542         no_timer_check = 1;
1543         return 1;
1544 }
1545 __setup("no_timer_check", notimercheck);
1546
1547 /*
1548  *
1549  * IRQ's that are handled by the PIC in the MPS IOAPIC case.
1550  * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ.
1551  *   Linux doesn't really care, as it's not actually used
1552  *   for any interrupt handling anyway.
1553  */
1554 #define PIC_IRQS        (1<<2)
1555
1556 void __init setup_IO_APIC(void)
1557 {
1558         enable_IO_APIC();
1559
1560         if (acpi_ioapic)
1561                 io_apic_irqs = ~0;      /* all IRQs go through IOAPIC */
1562         else
1563                 io_apic_irqs = ~PIC_IRQS;
1564
1565         apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n");
1566
1567         sync_Arb_IDs();
1568         setup_IO_APIC_irqs();
1569         init_IO_APIC_traps();
1570         check_timer();
1571         if (!acpi_ioapic)
1572                 print_IO_APIC();
1573 }
1574
1575 struct sysfs_ioapic_data {
1576         struct sys_device dev;
1577         struct IO_APIC_route_entry entry[0];
1578 };
1579 static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS];
1580
1581 static int ioapic_suspend(struct sys_device *dev, pm_message_t state)
1582 {
1583         struct IO_APIC_route_entry *entry;
1584         struct sysfs_ioapic_data *data;
1585         int i;
1586
1587         data = container_of(dev, struct sysfs_ioapic_data, dev);
1588         entry = data->entry;
1589         for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ )
1590                 *entry = ioapic_read_entry(dev->id, i);
1591
1592         return 0;
1593 }
1594
1595 static int ioapic_resume(struct sys_device *dev)
1596 {
1597         struct IO_APIC_route_entry *entry;
1598         struct sysfs_ioapic_data *data;
1599         unsigned long flags;
1600         union IO_APIC_reg_00 reg_00;
1601         int i;
1602
1603         data = container_of(dev, struct sysfs_ioapic_data, dev);
1604         entry = data->entry;
1605
1606         spin_lock_irqsave(&ioapic_lock, flags);
1607         reg_00.raw = io_apic_read(dev->id, 0);
1608         if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) {
1609                 reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid;
1610                 io_apic_write(dev->id, 0, reg_00.raw);
1611         }
1612         spin_unlock_irqrestore(&ioapic_lock, flags);
1613         for (i = 0; i < nr_ioapic_registers[dev->id]; i++)
1614                 ioapic_write_entry(dev->id, i, entry[i]);
1615
1616         return 0;
1617 }
1618
1619 static struct sysdev_class ioapic_sysdev_class = {
1620         set_kset_name("ioapic"),
1621         .suspend = ioapic_suspend,
1622         .resume = ioapic_resume,
1623 };
1624
1625 static int __init ioapic_init_sysfs(void)
1626 {
1627         struct sys_device * dev;
1628         int i, size, error = 0;
1629
1630         error = sysdev_class_register(&ioapic_sysdev_class);
1631         if (error)
1632                 return error;
1633
1634         for (i = 0; i < nr_ioapics; i++ ) {
1635                 size = sizeof(struct sys_device) + nr_ioapic_registers[i]
1636                         * sizeof(struct IO_APIC_route_entry);
1637                 mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL);
1638                 if (!mp_ioapic_data[i]) {
1639                         printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
1640                         continue;
1641                 }
1642                 memset(mp_ioapic_data[i], 0, size);
1643                 dev = &mp_ioapic_data[i]->dev;
1644                 dev->id = i;
1645                 dev->cls = &ioapic_sysdev_class;
1646                 error = sysdev_register(dev);
1647                 if (error) {
1648                         kfree(mp_ioapic_data[i]);
1649                         mp_ioapic_data[i] = NULL;
1650                         printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i);
1651                         continue;
1652                 }
1653         }
1654
1655         return 0;
1656 }
1657
1658 device_initcall(ioapic_init_sysfs);
1659
1660 /*
1661  * Dynamic irq allocate and deallocation
1662  */
1663 int create_irq(void)
1664 {
1665         /* Allocate an unused irq */
1666         int irq;
1667         int new;
1668         int vector = 0;
1669         unsigned long flags;
1670
1671         irq = -ENOSPC;
1672         spin_lock_irqsave(&vector_lock, flags);
1673         for (new = (NR_IRQS - 1); new >= 0; new--) {
1674                 if (platform_legacy_irq(new))
1675                         continue;
1676                 if (irq_vector[new] != 0)
1677                         continue;
1678                 vector = __assign_irq_vector(new, TARGET_CPUS);
1679                 if (likely(vector > 0))
1680                         irq = new;
1681                 break;
1682         }
1683         spin_unlock_irqrestore(&vector_lock, flags);
1684
1685         if (irq >= 0) {
1686                 dynamic_irq_init(irq);
1687         }
1688         return irq;
1689 }
1690
1691 void destroy_irq(unsigned int irq)
1692 {
1693         unsigned long flags;
1694
1695         dynamic_irq_cleanup(irq);
1696
1697         spin_lock_irqsave(&vector_lock, flags);
1698         irq_vector[irq] = 0;
1699         spin_unlock_irqrestore(&vector_lock, flags);
1700 }
1701
1702 /*
1703  * MSI mesage composition
1704  */
1705 #ifdef CONFIG_PCI_MSI
1706 static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg)
1707 {
1708         int vector;
1709         unsigned dest;
1710
1711         vector = assign_irq_vector(irq, TARGET_CPUS);
1712         if (vector >= 0) {
1713                 cpumask_t tmp;
1714
1715                 cpus_clear(tmp);
1716                 cpu_set(vector >> 8, tmp);
1717                 dest = cpu_mask_to_apicid(tmp);
1718
1719                 msg->address_hi = MSI_ADDR_BASE_HI;
1720                 msg->address_lo =
1721                         MSI_ADDR_BASE_LO |
1722                         ((INT_DEST_MODE == 0) ?
1723                                 MSI_ADDR_DEST_MODE_PHYSICAL:
1724                                 MSI_ADDR_DEST_MODE_LOGICAL) |
1725                         ((INT_DELIVERY_MODE != dest_LowestPrio) ?
1726                                 MSI_ADDR_REDIRECTION_CPU:
1727                                 MSI_ADDR_REDIRECTION_LOWPRI) |
1728                         MSI_ADDR_DEST_ID(dest);
1729
1730                 msg->data =
1731                         MSI_DATA_TRIGGER_EDGE |
1732                         MSI_DATA_LEVEL_ASSERT |
1733                         ((INT_DELIVERY_MODE != dest_LowestPrio) ?
1734                                 MSI_DATA_DELIVERY_FIXED:
1735                                 MSI_DATA_DELIVERY_LOWPRI) |
1736                         MSI_DATA_VECTOR(vector);
1737         }
1738         return vector;
1739 }
1740
1741 #ifdef CONFIG_SMP
1742 static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask)
1743 {
1744         struct msi_msg msg;
1745         unsigned int dest;
1746         cpumask_t tmp;
1747         int vector;
1748
1749         cpus_and(tmp, mask, cpu_online_map);
1750         if (cpus_empty(tmp))
1751                 tmp = TARGET_CPUS;
1752
1753         cpus_and(mask, tmp, CPU_MASK_ALL);
1754
1755         vector = assign_irq_vector(irq, mask);
1756         if (vector < 0)
1757                 return;
1758
1759         cpus_clear(tmp);
1760         cpu_set(vector >> 8, tmp);
1761         dest = cpu_mask_to_apicid(tmp);
1762
1763         read_msi_msg(irq, &msg);
1764
1765         msg.data &= ~MSI_DATA_VECTOR_MASK;
1766         msg.data |= MSI_DATA_VECTOR(vector);
1767         msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
1768         msg.address_lo |= MSI_ADDR_DEST_ID(dest);
1769
1770         write_msi_msg(irq, &msg);
1771         set_native_irq_info(irq, mask);
1772 }
1773 #endif /* CONFIG_SMP */
1774
1775 /*
1776  * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices,
1777  * which implement the MSI or MSI-X Capability Structure.
1778  */
1779 static struct irq_chip msi_chip = {
1780         .name           = "PCI-MSI",
1781         .unmask         = unmask_msi_irq,
1782         .mask           = mask_msi_irq,
1783         .ack            = ack_apic_edge,
1784 #ifdef CONFIG_SMP
1785         .set_affinity   = set_msi_irq_affinity,
1786 #endif
1787         .retrigger      = ioapic_retrigger_irq,
1788 };
1789
1790 int arch_setup_msi_irq(unsigned int irq, struct pci_dev *dev)
1791 {
1792         struct msi_msg msg;
1793         int ret;
1794         ret = msi_compose_msg(dev, irq, &msg);
1795         if (ret < 0)
1796                 return ret;
1797
1798         write_msi_msg(irq, &msg);
1799
1800         set_irq_chip_and_handler(irq, &msi_chip, handle_edge_irq);
1801
1802         return 0;
1803 }
1804
1805 void arch_teardown_msi_irq(unsigned int irq)
1806 {
1807         return;
1808 }
1809
1810 #endif /* CONFIG_PCI_MSI */
1811
1812 /*
1813  * Hypertransport interrupt support
1814  */
1815 #ifdef CONFIG_HT_IRQ
1816
1817 #ifdef CONFIG_SMP
1818
1819 static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector)
1820 {
1821         u32 low, high;
1822         low  = read_ht_irq_low(irq);
1823         high = read_ht_irq_high(irq);
1824
1825         low  &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK);
1826         high &= ~(HT_IRQ_HIGH_DEST_ID_MASK);
1827
1828         low  |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest);
1829         high |= HT_IRQ_HIGH_DEST_ID(dest);
1830
1831         write_ht_irq_low(irq, low);
1832         write_ht_irq_high(irq, high);
1833 }
1834
1835 static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask)
1836 {
1837         unsigned int dest;
1838         cpumask_t tmp;
1839         int vector;
1840
1841         cpus_and(tmp, mask, cpu_online_map);
1842         if (cpus_empty(tmp))
1843                 tmp = TARGET_CPUS;
1844
1845         cpus_and(mask, tmp, CPU_MASK_ALL);
1846
1847         vector = assign_irq_vector(irq, mask);
1848         if (vector < 0)
1849                 return;
1850
1851         cpus_clear(tmp);
1852         cpu_set(vector >> 8, tmp);
1853         dest = cpu_mask_to_apicid(tmp);
1854
1855         target_ht_irq(irq, dest, vector & 0xff);
1856         set_native_irq_info(irq, mask);
1857 }
1858 #endif
1859
1860 static struct hw_interrupt_type ht_irq_chip = {
1861         .name           = "PCI-HT",
1862         .mask           = mask_ht_irq,
1863         .unmask         = unmask_ht_irq,
1864         .ack            = ack_apic_edge,
1865 #ifdef CONFIG_SMP
1866         .set_affinity   = set_ht_irq_affinity,
1867 #endif
1868         .retrigger      = ioapic_retrigger_irq,
1869 };
1870
1871 int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
1872 {
1873         int vector;
1874
1875         vector = assign_irq_vector(irq, TARGET_CPUS);
1876         if (vector >= 0) {
1877                 u32 low, high;
1878                 unsigned dest;
1879                 cpumask_t tmp;
1880
1881                 cpus_clear(tmp);
1882                 cpu_set(vector >> 8, tmp);
1883                 dest = cpu_mask_to_apicid(tmp);
1884
1885                 high =  HT_IRQ_HIGH_DEST_ID(dest);
1886
1887                 low =   HT_IRQ_LOW_BASE |
1888                         HT_IRQ_LOW_DEST_ID(dest) |
1889                         HT_IRQ_LOW_VECTOR(vector) |
1890                         ((INT_DEST_MODE == 0) ?
1891                                 HT_IRQ_LOW_DM_PHYSICAL :
1892                                 HT_IRQ_LOW_DM_LOGICAL) |
1893                         HT_IRQ_LOW_RQEOI_EDGE |
1894                         ((INT_DELIVERY_MODE != dest_LowestPrio) ?
1895                                 HT_IRQ_LOW_MT_FIXED :
1896                                 HT_IRQ_LOW_MT_ARBITRATED);
1897
1898                 write_ht_irq_low(irq, low);
1899                 write_ht_irq_high(irq, high);
1900
1901                 set_irq_chip_and_handler(irq, &ht_irq_chip, handle_edge_irq);
1902         }
1903         return vector;
1904 }
1905 #endif /* CONFIG_HT_IRQ */
1906
1907 /* --------------------------------------------------------------------------
1908                           ACPI-based IOAPIC Configuration
1909    -------------------------------------------------------------------------- */
1910
1911 #ifdef CONFIG_ACPI
1912
1913 #define IO_APIC_MAX_ID          0xFE
1914
1915 int __init io_apic_get_redir_entries (int ioapic)
1916 {
1917         union IO_APIC_reg_01    reg_01;
1918         unsigned long flags;
1919
1920         spin_lock_irqsave(&ioapic_lock, flags);
1921         reg_01.raw = io_apic_read(ioapic, 1);
1922         spin_unlock_irqrestore(&ioapic_lock, flags);
1923
1924         return reg_01.bits.entries;
1925 }
1926
1927
1928 int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
1929 {
1930         struct IO_APIC_route_entry entry;
1931         unsigned long flags;
1932         int vector;
1933         cpumask_t mask;
1934
1935         if (!IO_APIC_IRQ(irq)) {
1936                 apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
1937                         ioapic);
1938                 return -EINVAL;
1939         }
1940
1941         /*
1942          * IRQs < 16 are already in the irq_2_pin[] map
1943          */
1944         if (irq >= 16)
1945                 add_pin_to_irq(irq, ioapic, pin);
1946
1947
1948         vector = assign_irq_vector(irq, TARGET_CPUS);
1949         if (vector < 0)
1950                 return vector;
1951
1952         cpus_clear(mask);
1953         cpu_set(vector >> 8, mask);
1954
1955         /*
1956          * Generate a PCI IRQ routing entry and program the IOAPIC accordingly.
1957          * Note that we mask (disable) IRQs now -- these get enabled when the
1958          * corresponding device driver registers for this IRQ.
1959          */
1960
1961         memset(&entry,0,sizeof(entry));
1962
1963         entry.delivery_mode = INT_DELIVERY_MODE;
1964         entry.dest_mode = INT_DEST_MODE;
1965         entry.dest.logical.logical_dest = cpu_mask_to_apicid(mask);
1966         entry.trigger = triggering;
1967         entry.polarity = polarity;
1968         entry.mask = 1;                                  /* Disabled (masked) */
1969         entry.vector = vector & 0xff;
1970
1971         apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry (%d-%d -> 0x%x -> "
1972                 "IRQ %d Mode:%i Active:%i)\n", ioapic,
1973                mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq,
1974                triggering, polarity);
1975
1976         ioapic_register_intr(irq, entry.vector, triggering);
1977
1978         if (!ioapic && (irq < 16))
1979                 disable_8259A_irq(irq);
1980
1981         ioapic_write_entry(ioapic, pin, entry);
1982
1983         spin_lock_irqsave(&ioapic_lock, flags);
1984         set_native_irq_info(irq, TARGET_CPUS);
1985         spin_unlock_irqrestore(&ioapic_lock, flags);
1986
1987         return 0;
1988 }
1989
1990 #endif /* CONFIG_ACPI */
1991
1992
1993 /*
1994  * This function currently is only a helper for the i386 smp boot process where
1995  * we need to reprogram the ioredtbls to cater for the cpus which have come online
1996  * so mask in all cases should simply be TARGET_CPUS
1997  */
1998 #ifdef CONFIG_SMP
1999 void __init setup_ioapic_dest(void)
2000 {
2001         int pin, ioapic, irq, irq_entry;
2002
2003         if (skip_ioapic_setup == 1)
2004                 return;
2005
2006         for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
2007                 for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
2008                         irq_entry = find_irq_entry(ioapic, pin, mp_INT);
2009                         if (irq_entry == -1)
2010                                 continue;
2011                         irq = pin_2_irq(irq_entry, ioapic, pin);
2012                         set_ioapic_affinity_irq(irq, TARGET_CPUS);
2013                 }
2014
2015         }
2016 }
2017 #endif