arch/x86/kernel/hpet.c

   1 #include <linux/clocksource.h>
   2 #include <linux/clockchips.h>
   3 #include <linux/interrupt.h>
   4 #include <linux/sysdev.h>
   5 #include <linux/delay.h>
   6 #include <linux/errno.h>
   7 #include <linux/i8253.h>
   8 #include <linux/slab.h>
   9 #include <linux/hpet.h>
  10 #include <linux/init.h>
  11 #include <linux/cpu.h>
  12 #include <linux/pm.h>
  13 #include <linux/io.h>
  14
  15 #include <asm/fixmap.h>
  16 #include <asm/hpet.h>
  17 #include <asm/time.h>
  18
  19 #define HPET_MASK                       CLOCKSOURCE_MASK(32)
  20
  21 /* FSEC = 10^-15
  22    NSEC = 10^-9 */
  23 #define FSEC_PER_NSEC                   1000000L
  24
  25 #define HPET_DEV_USED_BIT               2
  26 #define HPET_DEV_USED                   (1 << HPET_DEV_USED_BIT)
  27 #define HPET_DEV_VALID                  0x8
  28 #define HPET_DEV_FSB_CAP                0x1000
  29 #define HPET_DEV_PERI_CAP               0x2000
  30
  31 #define HPET_MIN_CYCLES                 128
  32 #define HPET_MIN_PROG_DELTA             (HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1))
  33
  34 #define EVT_TO_HPET_DEV(evt) container_of(evt, struct hpet_dev, evt)
  35
  36 /*
  37  * HPET address is set in acpi/boot.c, when an ACPI entry exists
  38  */
  39 unsigned long                           hpet_address;
  40 u8                                      hpet_blockid; /* OS timer block num */
  41 u8                                      hpet_msi_disable;
  42
  43 #ifdef CONFIG_PCI_MSI
  44 static unsigned long                    hpet_num_timers;
  45 #endif
  46 static void __iomem                     *hpet_virt_address;
  47
  48 struct hpet_dev {
  49         struct clock_event_device       evt;
  50         unsigned int                    num;
  51         int                             cpu;
  52         unsigned int                    irq;
  53         unsigned int                    flags;
  54         char                            name[10];
  55 };
  56
  57 inline unsigned int hpet_readl(unsigned int a)
  58 {
  59         return readl(hpet_virt_address + a);
  60 }
  61
  62 static inline void hpet_writel(unsigned int d, unsigned int a)
  63 {
  64         writel(d, hpet_virt_address + a);
  65 }
  66
  67 #ifdef CONFIG_X86_64
  68 #include <asm/pgtable.h>
  69 #endif
  70
  71 static inline void hpet_set_mapping(void)
  72 {
  73         hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
  74 #ifdef CONFIG_X86_64
  75         __set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE);
  76 #endif
  77 }
  78
  79 static inline void hpet_clear_mapping(void)
  80 {
  81         iounmap(hpet_virt_address);
  82         hpet_virt_address = NULL;
  83 }
  84
  85 /*
  86  * HPET command line enable / disable
  87  */
  88 static int boot_hpet_disable;
  89 int hpet_force_user;
  90 static int hpet_verbose;
  91
  92 static int __init hpet_setup(char *str)
  93 {
  94         if (str) {
  95                 if (!strncmp("disable", str, 7))
  96                         boot_hpet_disable = 1;
  97                 if (!strncmp("force", str, 5))
  98                         hpet_force_user = 1;
  99                 if (!strncmp("verbose", str, 7))
 100                         hpet_verbose = 1;
 101         }
 102         return 1;
 103 }
 104 __setup("hpet=", hpet_setup);
 105
 106 static int __init disable_hpet(char *str)
 107 {
 108         boot_hpet_disable = 1;
 109         return 1;
 110 }
 111 __setup("nohpet", disable_hpet);
 112
 113 static inline int is_hpet_capable(void)
 114 {
 115         return !boot_hpet_disable && hpet_address;
 116 }
 117
 118 /*
 119  * HPET timer interrupt enable / disable
 120  */
 121 static int hpet_legacy_int_enabled;
 122
 123 /**
 124  * is_hpet_enabled - check whether the hpet timer interrupt is enabled
 125  */
 126 int is_hpet_enabled(void)
 127 {
 128         return is_hpet_capable() && hpet_legacy_int_enabled;
 129 }
 130 EXPORT_SYMBOL_GPL(is_hpet_enabled);
 131
 132 static void _hpet_print_config(const char *function, int line)
 133 {
 134         u32 i, timers, l, h;
 135         printk(KERN_INFO "hpet: %s(%d):\n", function, line);
 136         l = hpet_readl(HPET_ID);
 137         h = hpet_readl(HPET_PERIOD);
 138         timers = ((l & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1;
 139         printk(KERN_INFO "hpet: ID: 0x%x, PERIOD: 0x%x\n", l, h);
 140         l = hpet_readl(HPET_CFG);
 141         h = hpet_readl(HPET_STATUS);
 142         printk(KERN_INFO "hpet: CFG: 0x%x, STATUS: 0x%x\n", l, h);
 143         l = hpet_readl(HPET_COUNTER);
 144         h = hpet_readl(HPET_COUNTER+4);
 145         printk(KERN_INFO "hpet: COUNTER_l: 0x%x, COUNTER_h: 0x%x\n", l, h);
 146
 147         for (i = 0; i < timers; i++) {
 148                 l = hpet_readl(HPET_Tn_CFG(i));
 149                 h = hpet_readl(HPET_Tn_CFG(i)+4);
 150                 printk(KERN_INFO "hpet: T%d: CFG_l: 0x%x, CFG_h: 0x%x\n",
 151                        i, l, h);
 152                 l = hpet_readl(HPET_Tn_CMP(i));
 153                 h = hpet_readl(HPET_Tn_CMP(i)+4);
 154                 printk(KERN_INFO "hpet: T%d: CMP_l: 0x%x, CMP_h: 0x%x\n",
 155                        i, l, h);
 156                 l = hpet_readl(HPET_Tn_ROUTE(i));
 157                 h = hpet_readl(HPET_Tn_ROUTE(i)+4);
 158                 printk(KERN_INFO "hpet: T%d ROUTE_l: 0x%x, ROUTE_h: 0x%x\n",
 159                        i, l, h);
 160         }
 161 }
 162
 163 #define hpet_print_config()                                     \
 164 do {                                                            \
 165         if (hpet_verbose)                                       \
 166                 _hpet_print_config(__FUNCTION__, __LINE__);     \
 167 } while (0)
 168
 169 /*
 170  * When the hpet driver (/dev/hpet) is enabled, we need to reserve
 171  * timer 0 and timer 1 in case of RTC emulation.
 172  */
 173 #ifdef CONFIG_HPET
 174
 175 static void hpet_reserve_msi_timers(struct hpet_data *hd);
 176
 177 static void hpet_reserve_platform_timers(unsigned int id)
 178 {
 179         struct hpet __iomem *hpet = hpet_virt_address;
 180         struct hpet_timer __iomem *timer = &hpet->hpet_timers[2];
 181         unsigned int nrtimers, i;
 182         struct hpet_data hd;
 183
 184         nrtimers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1;
 185
 186         memset(&hd, 0, sizeof(hd));
 187         hd.hd_phys_address      = hpet_address;
 188         hd.hd_address           = hpet;
 189         hd.hd_nirqs             = nrtimers;
 190         hpet_reserve_timer(&hd, 0);
 191
 192 #ifdef CONFIG_HPET_EMULATE_RTC
 193         hpet_reserve_timer(&hd, 1);
 194 #endif
 195
 196         /*
 197          * NOTE that hd_irq[] reflects IOAPIC input pins (LEGACY_8254
 198          * is wrong for i8259!) not the output IRQ.  Many BIOS writers
 199          * don't bother configuring *any* comparator interrupts.
 200          */
 201         hd.hd_irq[0] = HPET_LEGACY_8254;
 202         hd.hd_irq[1] = HPET_LEGACY_RTC;
 203
 204         for (i = 2; i < nrtimers; timer++, i++) {
 205                 hd.hd_irq[i] = (readl(&timer->hpet_config) &
 206                         Tn_INT_ROUTE_CNF_MASK) >> Tn_INT_ROUTE_CNF_SHIFT;
 207         }
 208
 209         hpet_reserve_msi_timers(&hd);
 210
 211         hpet_alloc(&hd);
 212
 213 }
 214 #else
 215 static void hpet_reserve_platform_timers(unsigned int id) { }
 216 #endif
 217
 218 /*
 219  * Common hpet info
 220  */
 221 static unsigned long hpet_freq;
 222
 223 static void hpet_legacy_set_mode(enum clock_event_mode mode,
 224                           struct clock_event_device *evt);
 225 static int hpet_legacy_next_event(unsigned long delta,
 226                            struct clock_event_device *evt);
 227
 228 /*
 229  * The hpet clock event device
 230  */
 231 static struct clock_event_device hpet_clockevent = {
 232         .name           = "hpet",
 233         .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 234         .set_mode       = hpet_legacy_set_mode,
 235         .set_next_event = hpet_legacy_next_event,
 236         .irq            = 0,
 237         .rating         = 50,
 238 };
 239
 240 static void hpet_stop_counter(void)
 241 {
 242         unsigned long cfg = hpet_readl(HPET_CFG);
 243         cfg &= ~HPET_CFG_ENABLE;
 244         hpet_writel(cfg, HPET_CFG);
 245 }
 246
 247 static void hpet_reset_counter(void)
 248 {
 249         hpet_writel(0, HPET_COUNTER);
 250         hpet_writel(0, HPET_COUNTER + 4);
 251 }
 252
 253 static void hpet_start_counter(void)
 254 {
 255         unsigned int cfg = hpet_readl(HPET_CFG);
 256         cfg |= HPET_CFG_ENABLE;
 257         hpet_writel(cfg, HPET_CFG);
 258 }
 259
 260 static void hpet_restart_counter(void)
 261 {
 262         hpet_stop_counter();
 263         hpet_reset_counter();
 264         hpet_start_counter();
 265 }
 266
 267 static void hpet_resume_device(void)
 268 {
 269         force_hpet_resume();
 270 }
 271
 272 static void hpet_resume_counter(struct clocksource *cs)
 273 {
 274         hpet_resume_device();
 275         hpet_restart_counter();
 276 }
 277
 278 static void hpet_enable_legacy_int(void)
 279 {
 280         unsigned int cfg = hpet_readl(HPET_CFG);
 281
 282         cfg |= HPET_CFG_LEGACY;
 283         hpet_writel(cfg, HPET_CFG);
 284         hpet_legacy_int_enabled = 1;
 285 }
 286
 287 static void hpet_legacy_clockevent_register(void)
 288 {
 289         /* Start HPET legacy interrupts */
 290         hpet_enable_legacy_int();
 291
 292         /*
 293          * Start hpet with the boot cpu mask and make it
 294          * global after the IO_APIC has been initialized.
 295          */
 296         hpet_clockevent.cpumask = cpumask_of(smp_processor_id());
 297         clockevents_config_and_register(&hpet_clockevent, hpet_freq,
 298                                         HPET_MIN_PROG_DELTA, 0x7FFFFFFF);
 299         global_clock_event = &hpet_clockevent;
 300         printk(KERN_DEBUG "hpet clockevent registered\n");
 301 }
 302
 303 static int hpet_setup_msi_irq(unsigned int irq);
 304
 305 static void hpet_set_mode(enum clock_event_mode mode,
 306                           struct clock_event_device *evt, int timer)
 307 {
 308         unsigned int cfg, cmp, now;
 309         uint64_t delta;
 310
 311         switch (mode) {
 312         case CLOCK_EVT_MODE_PERIODIC:
 313                 hpet_stop_counter();
 314                 delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult;
 315                 delta >>= evt->shift;
 316                 now = hpet_readl(HPET_COUNTER);
 317                 cmp = now + (unsigned int) delta;
 318                 cfg = hpet_readl(HPET_Tn_CFG(timer));
 319                 /* Make sure we use edge triggered interrupts */
 320                 cfg &= ~HPET_TN_LEVEL;
 321                 cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
 322                        HPET_TN_SETVAL | HPET_TN_32BIT;
 323                 hpet_writel(cfg, HPET_Tn_CFG(timer));
 324                 hpet_writel(cmp, HPET_Tn_CMP(timer));
 325                 udelay(1);
 326                 /*
 327                  * HPET on AMD 81xx needs a second write (with HPET_TN_SETVAL
 328                  * cleared) to T0_CMP to set the period. The HPET_TN_SETVAL
 329                  * bit is automatically cleared after the first write.
 330                  * (See AMD-8111 HyperTransport I/O Hub Data Sheet,
 331                  * Publication # 24674)
 332                  */
 333                 hpet_writel((unsigned int) delta, HPET_Tn_CMP(timer));
 334                 hpet_start_counter();
 335                 hpet_print_config();
 336                 break;
 337
 338         case CLOCK_EVT_MODE_ONESHOT:
 339                 cfg = hpet_readl(HPET_Tn_CFG(timer));
 340                 cfg &= ~HPET_TN_PERIODIC;
 341                 cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
 342                 hpet_writel(cfg, HPET_Tn_CFG(timer));
 343                 break;
 344
 345         case CLOCK_EVT_MODE_UNUSED:
 346         case CLOCK_EVT_MODE_SHUTDOWN:
 347                 cfg = hpet_readl(HPET_Tn_CFG(timer));
 348                 cfg &= ~HPET_TN_ENABLE;
 349                 hpet_writel(cfg, HPET_Tn_CFG(timer));
 350                 break;
 351
 352         case CLOCK_EVT_MODE_RESUME:
 353                 if (timer == 0) {
 354                         hpet_enable_legacy_int();
 355                 } else {
 356                         struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
 357                         hpet_setup_msi_irq(hdev->irq);
 358                         disable_irq(hdev->irq);
 359                         irq_set_affinity(hdev->irq, cpumask_of(hdev->cpu));
 360                         enable_irq(hdev->irq);
 361                 }
 362                 hpet_print_config();
 363                 break;
 364         }
 365 }
 366
 367 static int hpet_next_event(unsigned long delta,
 368                            struct clock_event_device *evt, int timer)
 369 {
 370         u32 cnt;
 371         s32 res;
 372
 373         cnt = hpet_readl(HPET_COUNTER);
 374         cnt += (u32) delta;
 375         hpet_writel(cnt, HPET_Tn_CMP(timer));
 376
 377         /*
 378          * HPETs are a complete disaster. The compare register is
 379          * based on a equal comparison and neither provides a less
 380          * than or equal functionality (which would require to take
 381          * the wraparound into account) nor a simple count down event
 382          * mode. Further the write to the comparator register is
 383          * delayed internally up to two HPET clock cycles in certain
 384          * chipsets (ATI, ICH9,10). Some newer AMD chipsets have even
 385          * longer delays. We worked around that by reading back the
 386          * compare register, but that required another workaround for
 387          * ICH9,10 chips where the first readout after write can
 388          * return the old stale value. We already had a minimum
 389          * programming delta of 5us enforced, but a NMI or SMI hitting
 390          * between the counter readout and the comparator write can
 391          * move us behind that point easily. Now instead of reading
 392          * the compare register back several times, we make the ETIME
 393          * decision based on the following: Return ETIME if the
 394          * counter value after the write is less than HPET_MIN_CYCLES
 395          * away from the event or if the counter is already ahead of
 396          * the event. The minimum programming delta for the generic
 397          * clockevents code is set to 1.5 * HPET_MIN_CYCLES.
 398          */
 399         res = (s32)(cnt - hpet_readl(HPET_COUNTER));
 400
 401         return res < HPET_MIN_CYCLES ? -ETIME : 0;
 402 }
 403
 404 static void hpet_legacy_set_mode(enum clock_event_mode mode,
 405                         struct clock_event_device *evt)
 406 {
 407         hpet_set_mode(mode, evt, 0);
 408 }
 409
 410 static int hpet_legacy_next_event(unsigned long delta,
 411                         struct clock_event_device *evt)
 412 {
 413         return hpet_next_event(delta, evt, 0);
 414 }
 415
 416 /*
 417  * HPET MSI Support
 418  */
 419 #ifdef CONFIG_PCI_MSI
 420
 421 static DEFINE_PER_CPU(struct hpet_dev *, cpu_hpet_dev);
 422 static struct hpet_dev  *hpet_devs;
 423
 424 void hpet_msi_unmask(struct irq_data *data)
 425 {
 426         struct hpet_dev *hdev = data->handler_data;
 427         unsigned int cfg;
 428
 429         /* unmask it */
 430         cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
 431         cfg |= HPET_TN_FSB;
 432         hpet_writel(cfg, HPET_Tn_CFG(hdev->num));
 433 }
 434
 435 void hpet_msi_mask(struct irq_data *data)
 436 {
 437         struct hpet_dev *hdev = data->handler_data;
 438         unsigned int cfg;
 439
 440         /* mask it */
 441         cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
 442         cfg &= ~HPET_TN_FSB;
 443         hpet_writel(cfg, HPET_Tn_CFG(hdev->num));
 444 }
 445
 446 void hpet_msi_write(struct hpet_dev *hdev, struct msi_msg *msg)
 447 {
 448         hpet_writel(msg->data, HPET_Tn_ROUTE(hdev->num));
 449         hpet_writel(msg->address_lo, HPET_Tn_ROUTE(hdev->num) + 4);
 450 }
 451
 452 void hpet_msi_read(struct hpet_dev *hdev, struct msi_msg *msg)
 453 {
 454         msg->data = hpet_readl(HPET_Tn_ROUTE(hdev->num));
 455         msg->address_lo = hpet_readl(HPET_Tn_ROUTE(hdev->num) + 4);
 456         msg->address_hi = 0;
 457 }
 458
 459 static void hpet_msi_set_mode(enum clock_event_mode mode,
 460                                 struct clock_event_device *evt)
 461 {
 462         struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
 463         hpet_set_mode(mode, evt, hdev->num);
 464 }
 465
 466 static int hpet_msi_next_event(unsigned long delta,
 467                                 struct clock_event_device *evt)
 468 {
 469         struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
 470         return hpet_next_event(delta, evt, hdev->num);
 471 }
 472
 473 static int hpet_setup_msi_irq(unsigned int irq)
 474 {
 475         if (arch_setup_hpet_msi(irq, hpet_blockid)) {
 476                 destroy_irq(irq);
 477                 return -EINVAL;
 478         }
 479         return 0;
 480 }
 481
 482 static int hpet_assign_irq(struct hpet_dev *dev)
 483 {
 484         unsigned int irq;
 485
 486         irq = create_irq_nr(0, -1);
 487         if (!irq)
 488                 return -EINVAL;
 489
 490         irq_set_handler_data(irq, dev);
 491
 492         if (hpet_setup_msi_irq(irq))
 493                 return -EINVAL;
 494
 495         dev->irq = irq;
 496         return 0;
 497 }
 498
 499 static irqreturn_t hpet_interrupt_handler(int irq, void *data)
 500 {
 501         struct hpet_dev *dev = (struct hpet_dev *)data;
 502         struct clock_event_device *hevt = &dev->evt;
 503
 504         if (!hevt->event_handler) {
 505                 printk(KERN_INFO "Spurious HPET timer interrupt on HPET timer %d\n",
 506                                 dev->num);
 507                 return IRQ_HANDLED;
 508         }
 509
 510         hevt->event_handler(hevt);
 511         return IRQ_HANDLED;
 512 }
 513
 514 static int hpet_setup_irq(struct hpet_dev *dev)
 515 {
 516
 517         if (request_irq(dev->irq, hpet_interrupt_handler,
 518                         IRQF_TIMER | IRQF_DISABLED | IRQF_NOBALANCING,
 519                         dev->name, dev))
 520                 return -1;
 521
 522         disable_irq(dev->irq);
 523         irq_set_affinity(dev->irq, cpumask_of(dev->cpu));
 524         enable_irq(dev->irq);
 525
 526         printk(KERN_DEBUG "hpet: %s irq %d for MSI\n",
 527                          dev->name, dev->irq);
 528
 529         return 0;
 530 }
 531
 532 /* This should be called in specific @cpu */
 533 static void init_one_hpet_msi_clockevent(struct hpet_dev *hdev, int cpu)
 534 {
 535         struct clock_event_device *evt = &hdev->evt;
 536
 537         WARN_ON(cpu != smp_processor_id());
 538         if (!(hdev->flags & HPET_DEV_VALID))
 539                 return;
 540
 541         if (hpet_setup_msi_irq(hdev->irq))
 542                 return;
 543
 544         hdev->cpu = cpu;
 545         per_cpu(cpu_hpet_dev, cpu) = hdev;
 546         evt->name = hdev->name;
 547         hpet_setup_irq(hdev);
 548         evt->irq = hdev->irq;
 549
 550         evt->rating = 110;
 551         evt->features = CLOCK_EVT_FEAT_ONESHOT;
 552         if (hdev->flags & HPET_DEV_PERI_CAP)
 553                 evt->features |= CLOCK_EVT_FEAT_PERIODIC;
 554
 555         evt->set_mode = hpet_msi_set_mode;
 556         evt->set_next_event = hpet_msi_next_event;
 557         evt->cpumask = cpumask_of(hdev->cpu);
 558
 559         clockevents_config_and_register(evt, hpet_freq, HPET_MIN_PROG_DELTA,
 560                                         0x7FFFFFFF);
 561 }
 562
 563 #ifdef CONFIG_HPET
 564 /* Reserve at least one timer for userspace (/dev/hpet) */
 565 #define RESERVE_TIMERS 1
 566 #else
 567 #define RESERVE_TIMERS 0
 568 #endif
 569
 570 static void hpet_msi_capability_lookup(unsigned int start_timer)
 571 {
 572         unsigned int id;
 573         unsigned int num_timers;
 574         unsigned int num_timers_used = 0;
 575         int i;
 576
 577         if (hpet_msi_disable)
 578                 return;
 579
 580         if (boot_cpu_has(X86_FEATURE_ARAT))
 581                 return;
 582         id = hpet_readl(HPET_ID);
 583
 584         num_timers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT);
 585         num_timers++; /* Value read out starts from 0 */
 586         hpet_print_config();
 587
 588         hpet_devs = kzalloc(sizeof(struct hpet_dev) * num_timers, GFP_KERNEL);
 589         if (!hpet_devs)
 590                 return;
 591
 592         hpet_num_timers = num_timers;
 593
 594         for (i = start_timer; i < num_timers - RESERVE_TIMERS; i++) {
 595                 struct hpet_dev *hdev = &hpet_devs[num_timers_used];
 596                 unsigned int cfg = hpet_readl(HPET_Tn_CFG(i));
 597
 598                 /* Only consider HPET timer with MSI support */
 599                 if (!(cfg & HPET_TN_FSB_CAP))
 600                         continue;
 601
 602                 hdev->flags = 0;
 603                 if (cfg & HPET_TN_PERIODIC_CAP)
 604                         hdev->flags |= HPET_DEV_PERI_CAP;
 605                 hdev->num = i;
 606
 607                 sprintf(hdev->name, "hpet%d", i);
 608                 if (hpet_assign_irq(hdev))
 609                         continue;
 610
 611                 hdev->flags |= HPET_DEV_FSB_CAP;
 612                 hdev->flags |= HPET_DEV_VALID;
 613                 num_timers_used++;
 614                 if (num_timers_used == num_possible_cpus())
 615                         break;
 616         }
 617
 618         printk(KERN_INFO "HPET: %d timers in total, %d timers will be used for per-cpu timer\n",
 619                 num_timers, num_timers_used);
 620 }
 621
 622 #ifdef CONFIG_HPET
 623 static void hpet_reserve_msi_timers(struct hpet_data *hd)
 624 {
 625         int i;
 626
 627         if (!hpet_devs)
 628                 return;
 629
 630         for (i = 0; i < hpet_num_timers; i++) {
 631                 struct hpet_dev *hdev = &hpet_devs[i];
 632
 633                 if (!(hdev->flags & HPET_DEV_VALID))
 634                         continue;
 635
 636                 hd->hd_irq[hdev->num] = hdev->irq;
 637                 hpet_reserve_timer(hd, hdev->num);
 638         }
 639 }
 640 #endif
 641
 642 static struct hpet_dev *hpet_get_unused_timer(void)
 643 {
 644         int i;
 645
 646         if (!hpet_devs)
 647                 return NULL;
 648
 649         for (i = 0; i < hpet_num_timers; i++) {
 650                 struct hpet_dev *hdev = &hpet_devs[i];
 651
 652                 if (!(hdev->flags & HPET_DEV_VALID))
 653                         continue;
 654                 if (test_and_set_bit(HPET_DEV_USED_BIT,
 655                         (unsigned long *)&hdev->flags))
 656                         continue;
 657                 return hdev;
 658         }
 659         return NULL;
 660 }
 661
 662 struct hpet_work_struct {
 663         struct delayed_work work;
 664         struct completion complete;
 665 };
 666
 667 static void hpet_work(struct work_struct *w)
 668 {
 669         struct hpet_dev *hdev;
 670         int cpu = smp_processor_id();
 671         struct hpet_work_struct *hpet_work;
 672
 673         hpet_work = container_of(w, struct hpet_work_struct, work.work);
 674
 675         hdev = hpet_get_unused_timer();
 676         if (hdev)
 677                 init_one_hpet_msi_clockevent(hdev, cpu);
 678
 679         complete(&hpet_work->complete);
 680 }
 681
 682 static int hpet_cpuhp_notify(struct notifier_block *n,
 683                 unsigned long action, void *hcpu)
 684 {
 685         unsigned long cpu = (unsigned long)hcpu;
 686         struct hpet_work_struct work;
 687         struct hpet_dev *hdev = per_cpu(cpu_hpet_dev, cpu);
 688
 689         switch (action & 0xf) {
 690         case CPU_ONLINE:
 691                 INIT_DELAYED_WORK_ONSTACK(&work.work, hpet_work);
 692                 init_completion(&work.complete);
 693                 /* FIXME: add schedule_work_on() */
 694                 schedule_delayed_work_on(cpu, &work.work, 0);
 695                 wait_for_completion(&work.complete);
 696                 destroy_timer_on_stack(&work.work.timer);
 697                 break;
 698         case CPU_DEAD:
 699                 if (hdev) {
 700                         free_irq(hdev->irq, hdev);
 701                         hdev->flags &= ~HPET_DEV_USED;
 702                         per_cpu(cpu_hpet_dev, cpu) = NULL;
 703                 }
 704                 break;
 705         }
 706         return NOTIFY_OK;
 707 }
 708 #else
 709
 710 static int hpet_setup_msi_irq(unsigned int irq)
 711 {
 712         return 0;
 713 }
 714 static void hpet_msi_capability_lookup(unsigned int start_timer)
 715 {
 716         return;
 717 }
 718
 719 #ifdef CONFIG_HPET
 720 static void hpet_reserve_msi_timers(struct hpet_data *hd)
 721 {
 722         return;
 723 }
 724 #endif
 725
 726 static int hpet_cpuhp_notify(struct notifier_block *n,
 727                 unsigned long action, void *hcpu)
 728 {
 729         return NOTIFY_OK;
 730 }
 731
 732 #endif
 733
 734 /*
 735  * Clock source related code
 736  */
 737 static cycle_t read_hpet(struct clocksource *cs)
 738 {
 739         return (cycle_t)hpet_readl(HPET_COUNTER);
 740 }
 741
 742 #ifdef CONFIG_X86_64
 743 static cycle_t __vsyscall_fn vread_hpet(void)
 744 {
 745         return readl((const void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0);
 746 }
 747 #endif
 748
 749 static struct clocksource clocksource_hpet = {
 750         .name           = "hpet",
 751         .rating         = 250,
 752         .read           = read_hpet,
 753         .mask           = HPET_MASK,
 754         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 755         .resume         = hpet_resume_counter,
 756 #ifdef CONFIG_X86_64
 757         .vread          = vread_hpet,
 758 #endif
 759 };
 760
 761 static int hpet_clocksource_register(void)
 762 {
 763         u64 start, now;
 764         cycle_t t1;
 765
 766         /* Start the counter */
 767         hpet_restart_counter();
 768
 769         /* Verify whether hpet counter works */
 770         t1 = hpet_readl(HPET_COUNTER);
 771         rdtscll(start);
 772
 773         /*
 774          * We don't know the TSC frequency yet, but waiting for
 775          * 200000 TSC cycles is safe:
 776          * 4 GHz == 50us
 777          * 1 GHz == 200us
 778          */
 779         do {
 780                 rep_nop();
 781                 rdtscll(now);
 782         } while ((now - start) < 200000UL);
 783
 784         if (t1 == hpet_readl(HPET_COUNTER)) {
 785                 printk(KERN_WARNING
 786                        "HPET counter not counting. HPET disabled\n");
 787                 return -ENODEV;
 788         }
 789
 790         clocksource_register_hz(&clocksource_hpet, (u32)hpet_freq);
 791         return 0;
 792 }
 793
 794 /**
 795  * hpet_enable - Try to setup the HPET timer. Returns 1 on success.
 796  */
 797 int __init hpet_enable(void)
 798 {
 799         unsigned long hpet_period;
 800         unsigned int id;
 801         u64 freq;
 802         int i;
 803
 804         if (!is_hpet_capable())
 805                 return 0;
 806
 807         hpet_set_mapping();
 808
 809         /*
 810          * Read the period and check for a sane value:
 811          */
 812         hpet_period = hpet_readl(HPET_PERIOD);
 813
 814         /*
 815          * AMD SB700 based systems with spread spectrum enabled use a
 816          * SMM based HPET emulation to provide proper frequency
 817          * setting. The SMM code is initialized with the first HPET
 818          * register access and takes some time to complete. During
 819          * this time the config register reads 0xffffffff. We check
 820          * for max. 1000 loops whether the config register reads a non
 821          * 0xffffffff value to make sure that HPET is up and running
 822          * before we go further. A counting loop is safe, as the HPET
 823          * access takes thousands of CPU cycles. On non SB700 based
 824          * machines this check is only done once and has no side
 825          * effects.
 826          */
 827         for (i = 0; hpet_readl(HPET_CFG) == 0xFFFFFFFF; i++) {
 828                 if (i == 1000) {
 829                         printk(KERN_WARNING
 830                                "HPET config register value = 0xFFFFFFFF. "
 831                                "Disabling HPET\n");
 832                         goto out_nohpet;
 833                 }
 834         }
 835
 836         if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD)
 837                 goto out_nohpet;
 838
 839         /*
 840          * The period is a femto seconds value. Convert it to a
 841          * frequency.
 842          */
 843         freq = FSEC_PER_SEC;
 844         do_div(freq, hpet_period);
 845         hpet_freq = freq;
 846
 847         /*
 848          * Read the HPET ID register to retrieve the IRQ routing
 849          * information and the number of channels
 850          */
 851         id = hpet_readl(HPET_ID);
 852         hpet_print_config();
 853
 854 #ifdef CONFIG_HPET_EMULATE_RTC
 855         /*
 856          * The legacy routing mode needs at least two channels, tick timer
 857          * and the rtc emulation channel.
 858          */
 859         if (!(id & HPET_ID_NUMBER))
 860                 goto out_nohpet;
 861 #endif
 862
 863         if (hpet_clocksource_register())
 864                 goto out_nohpet;
 865
 866         if (id & HPET_ID_LEGSUP) {
 867                 hpet_legacy_clockevent_register();
 868                 return 1;
 869         }
 870         return 0;
 871
 872 out_nohpet:
 873         hpet_clear_mapping();
 874         hpet_address = 0;
 875         return 0;
 876 }
 877
 878 /*
 879  * Needs to be late, as the reserve_timer code calls kalloc !
 880  *
 881  * Not a problem on i386 as hpet_enable is called from late_time_init,
 882  * but on x86_64 it is necessary !
 883  */
 884 static __init int hpet_late_init(void)
 885 {
 886         int cpu;
 887
 888         if (boot_hpet_disable)
 889                 return -ENODEV;
 890
 891         if (!hpet_address) {
 892                 if (!force_hpet_address)
 893                         return -ENODEV;
 894
 895                 hpet_address = force_hpet_address;
 896                 hpet_enable();
 897         }
 898
 899         if (!hpet_virt_address)
 900                 return -ENODEV;
 901
 902         if (hpet_readl(HPET_ID) & HPET_ID_LEGSUP)
 903                 hpet_msi_capability_lookup(2);
 904         else
 905                 hpet_msi_capability_lookup(0);
 906
 907         hpet_reserve_platform_timers(hpet_readl(HPET_ID));
 908         hpet_print_config();
 909
 910         if (hpet_msi_disable)
 911                 return 0;
 912
 913         if (boot_cpu_has(X86_FEATURE_ARAT))
 914                 return 0;
 915
 916         for_each_online_cpu(cpu) {
 917                 hpet_cpuhp_notify(NULL, CPU_ONLINE, (void *)(long)cpu);
 918         }
 919
 920         /* This notifier should be called after workqueue is ready */
 921         hotcpu_notifier(hpet_cpuhp_notify, -20);
 922
 923         return 0;
 924 }
 925 fs_initcall(hpet_late_init);
 926
 927 void hpet_disable(void)
 928 {
 929         if (is_hpet_capable() && hpet_virt_address) {
 930                 unsigned int cfg = hpet_readl(HPET_CFG);
 931
 932                 if (hpet_legacy_int_enabled) {
 933                         cfg &= ~HPET_CFG_LEGACY;
 934                         hpet_legacy_int_enabled = 0;
 935                 }
 936                 cfg &= ~HPET_CFG_ENABLE;
 937                 hpet_writel(cfg, HPET_CFG);
 938         }
 939 }
 940
 941 #ifdef CONFIG_HPET_EMULATE_RTC
 942
 943 /* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET
 944  * is enabled, we support RTC interrupt functionality in software.
 945  * RTC has 3 kinds of interrupts:
 946  * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock
 947  *    is updated
 948  * 2) Alarm Interrupt - generate an interrupt at a specific time of day
 949  * 3) Periodic Interrupt - generate periodic interrupt, with frequencies
 950  *    2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2)
 951  * (1) and (2) above are implemented using polling at a frequency of
 952  * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt
 953  * overhead. (DEFAULT_RTC_INT_FREQ)
 954  * For (3), we use interrupts at 64Hz or user specified periodic
 955  * frequency, whichever is higher.
 956  */
 957 #include <linux/mc146818rtc.h>
 958 #include <linux/rtc.h>
 959 #include <asm/rtc.h>
 960
 961 #define DEFAULT_RTC_INT_FREQ    64
 962 #define DEFAULT_RTC_SHIFT       6
 963 #define RTC_NUM_INTS            1
 964
 965 static unsigned long hpet_rtc_flags;
 966 static int hpet_prev_update_sec;
 967 static struct rtc_time hpet_alarm_time;
 968 static unsigned long hpet_pie_count;
 969 static u32 hpet_t1_cmp;
 970 static u32 hpet_default_delta;
 971 static u32 hpet_pie_delta;
 972 static unsigned long hpet_pie_limit;
 973
 974 static rtc_irq_handler irq_handler;
 975
 976 /*
 977  * Check that the hpet counter c1 is ahead of the c2
 978  */
 979 static inline int hpet_cnt_ahead(u32 c1, u32 c2)
 980 {
 981         return (s32)(c2 - c1) < 0;
 982 }
 983
 984 /*
 985  * Registers a IRQ handler.
 986  */
 987 int hpet_register_irq_handler(rtc_irq_handler handler)
 988 {
 989         if (!is_hpet_enabled())
 990                 return -ENODEV;
 991         if (irq_handler)
 992                 return -EBUSY;
 993
 994         irq_handler = handler;
 995
 996         return 0;
 997 }
 998 EXPORT_SYMBOL_GPL(hpet_register_irq_handler);
 999
1000 /*
1001  * Deregisters the IRQ handler registered with hpet_register_irq_handler()
1002  * and does cleanup.
1003  */
1004 void hpet_unregister_irq_handler(rtc_irq_handler handler)
1005 {
1006         if (!is_hpet_enabled())
1007                 return;
1008
1009         irq_handler = NULL;
1010         hpet_rtc_flags = 0;
1011 }
1012 EXPORT_SYMBOL_GPL(hpet_unregister_irq_handler);
1013
1014 /*
1015  * Timer 1 for RTC emulation. We use one shot mode, as periodic mode
1016  * is not supported by all HPET implementations for timer 1.
1017  *
1018  * hpet_rtc_timer_init() is called when the rtc is initialized.
1019  */
1020 int hpet_rtc_timer_init(void)
1021 {
1022         unsigned int cfg, cnt, delta;
1023         unsigned long flags;
1024
1025         if (!is_hpet_enabled())
1026                 return 0;
1027
1028         if (!hpet_default_delta) {
1029                 uint64_t clc;
1030
1031                 clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC;
1032                 clc >>= hpet_clockevent.shift + DEFAULT_RTC_SHIFT;
1033                 hpet_default_delta = clc;
1034         }
1035
1036         if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
1037                 delta = hpet_default_delta;
1038         else
1039                 delta = hpet_pie_delta;
1040
1041         local_irq_save(flags);
1042
1043         cnt = delta + hpet_readl(HPET_COUNTER);
1044         hpet_writel(cnt, HPET_T1_CMP);
1045         hpet_t1_cmp = cnt;
1046
1047         cfg = hpet_readl(HPET_T1_CFG);
1048         cfg &= ~HPET_TN_PERIODIC;
1049         cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
1050         hpet_writel(cfg, HPET_T1_CFG);
1051
1052         local_irq_restore(flags);
1053
1054         return 1;
1055 }
1056 EXPORT_SYMBOL_GPL(hpet_rtc_timer_init);
1057
1058 /*
1059  * The functions below are called from rtc driver.
1060  * Return 0 if HPET is not being used.
1061  * Otherwise do the necessary changes and return 1.
1062  */
1063 int hpet_mask_rtc_irq_bit(unsigned long bit_mask)
1064 {
1065         if (!is_hpet_enabled())
1066                 return 0;
1067
1068         hpet_rtc_flags &= ~bit_mask;
1069         return 1;
1070 }
1071 EXPORT_SYMBOL_GPL(hpet_mask_rtc_irq_bit);
1072
1073 int hpet_set_rtc_irq_bit(unsigned long bit_mask)
1074 {
1075         unsigned long oldbits = hpet_rtc_flags;
1076
1077         if (!is_hpet_enabled())
1078                 return 0;
1079
1080         hpet_rtc_flags |= bit_mask;
1081
1082         if ((bit_mask & RTC_UIE) && !(oldbits & RTC_UIE))
1083                 hpet_prev_update_sec = -1;
1084
1085         if (!oldbits)
1086                 hpet_rtc_timer_init();
1087
1088         return 1;
1089 }
1090 EXPORT_SYMBOL_GPL(hpet_set_rtc_irq_bit);
1091
1092 int hpet_set_alarm_time(unsigned char hrs, unsigned char min,
1093                         unsigned char sec)
1094 {
1095         if (!is_hpet_enabled())
1096                 return 0;
1097
1098         hpet_alarm_time.tm_hour = hrs;
1099         hpet_alarm_time.tm_min = min;
1100         hpet_alarm_time.tm_sec = sec;
1101
1102         return 1;
1103 }
1104 EXPORT_SYMBOL_GPL(hpet_set_alarm_time);
1105
1106 int hpet_set_periodic_freq(unsigned long freq)
1107 {
1108         uint64_t clc;
1109
1110         if (!is_hpet_enabled())
1111                 return 0;
1112
1113         if (freq <= DEFAULT_RTC_INT_FREQ)
1114                 hpet_pie_limit = DEFAULT_RTC_INT_FREQ / freq;
1115         else {
1116                 clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC;
1117                 do_div(clc, freq);
1118                 clc >>= hpet_clockevent.shift;
1119                 hpet_pie_delta = clc;
1120                 hpet_pie_limit = 0;
1121         }
1122         return 1;
1123 }
1124 EXPORT_SYMBOL_GPL(hpet_set_periodic_freq);
1125
1126 int hpet_rtc_dropped_irq(void)
1127 {
1128         return is_hpet_enabled();
1129 }
1130 EXPORT_SYMBOL_GPL(hpet_rtc_dropped_irq);
1131
1132 static void hpet_rtc_timer_reinit(void)
1133 {
1134         unsigned int cfg, delta;
1135         int lost_ints = -1;
1136
1137         if (unlikely(!hpet_rtc_flags)) {
1138                 cfg = hpet_readl(HPET_T1_CFG);
1139                 cfg &= ~HPET_TN_ENABLE;
1140                 hpet_writel(cfg, HPET_T1_CFG);
1141                 return;
1142         }
1143
1144         if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
1145                 delta = hpet_default_delta;
1146         else
1147                 delta = hpet_pie_delta;
1148
1149         /*
1150          * Increment the comparator value until we are ahead of the
1151          * current count.
1152          */
1153         do {
1154                 hpet_t1_cmp += delta;
1155                 hpet_writel(hpet_t1_cmp, HPET_T1_CMP);
1156                 lost_ints++;
1157         } while (!hpet_cnt_ahead(hpet_t1_cmp, hpet_readl(HPET_COUNTER)));
1158
1159         if (lost_ints) {
1160                 if (hpet_rtc_flags & RTC_PIE)
1161                         hpet_pie_count += lost_ints;
1162                 if (printk_ratelimit())
1163                         printk(KERN_WARNING "hpet1: lost %d rtc interrupts\n",
1164                                 lost_ints);
1165         }
1166 }
1167
1168 irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
1169 {
1170         struct rtc_time curr_time;
1171         unsigned long rtc_int_flag = 0;
1172
1173         hpet_rtc_timer_reinit();
1174         memset(&curr_time, 0, sizeof(struct rtc_time));
1175
1176         if (hpet_rtc_flags & (RTC_UIE | RTC_AIE))
1177                 get_rtc_time(&curr_time);
1178
1179         if (hpet_rtc_flags & RTC_UIE &&
1180             curr_time.tm_sec != hpet_prev_update_sec) {
1181                 if (hpet_prev_update_sec >= 0)
1182                         rtc_int_flag = RTC_UF;
1183                 hpet_prev_update_sec = curr_time.tm_sec;
1184         }
1185
1186         if (hpet_rtc_flags & RTC_PIE &&
1187             ++hpet_pie_count >= hpet_pie_limit) {
1188                 rtc_int_flag |= RTC_PF;
1189                 hpet_pie_count = 0;
1190         }
1191
1192         if (hpet_rtc_flags & RTC_AIE &&
1193             (curr_time.tm_sec == hpet_alarm_time.tm_sec) &&
1194             (curr_time.tm_min == hpet_alarm_time.tm_min) &&
1195             (curr_time.tm_hour == hpet_alarm_time.tm_hour))
1196                         rtc_int_flag |= RTC_AF;
1197
1198         if (rtc_int_flag) {
1199                 rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8));
1200                 if (irq_handler)
1201                         irq_handler(rtc_int_flag, dev_id);
1202         }
1203         return IRQ_HANDLED;
1204 }
1205 EXPORT_SYMBOL_GPL(hpet_rtc_interrupt);
1206 #endif