Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
[pandora-kernel.git] / arch / x86 / include / asm / irqflags.h
1 #ifndef _X86_IRQFLAGS_H_
2 #define _X86_IRQFLAGS_H_
3
4 #include <asm/processor-flags.h>
5
6 #ifndef __ASSEMBLY__
7 /*
8  * Interrupt control:
9  */
10
11 static inline unsigned long native_save_fl(void)
12 {
13         unsigned long flags;
14
15         /*
16          * "=rm" is safe here, because "pop" adjusts the stack before
17          * it evaluates its effective address -- this is part of the
18          * documented behavior of the "pop" instruction.
19          */
20         asm volatile("# __raw_save_flags\n\t"
21                      "pushf ; pop %0"
22                      : "=rm" (flags)
23                      : /* no input */
24                      : "memory");
25
26         return flags;
27 }
28
29 static inline void native_restore_fl(unsigned long flags)
30 {
31         asm volatile("push %0 ; popf"
32                      : /* no output */
33                      :"g" (flags)
34                      :"memory", "cc");
35 }
36
37 static inline void native_irq_disable(void)
38 {
39         asm volatile("cli": : :"memory");
40 }
41
42 static inline void native_irq_enable(void)
43 {
44         asm volatile("sti": : :"memory");
45 }
46
47 static inline void native_safe_halt(void)
48 {
49         asm volatile("sti; hlt": : :"memory");
50 }
51
52 static inline void native_halt(void)
53 {
54         asm volatile("hlt": : :"memory");
55 }
56
57 #endif
58
59 #ifdef CONFIG_PARAVIRT
60 #include <asm/paravirt.h>
61 #else
62 #ifndef __ASSEMBLY__
63
64 static inline unsigned long __raw_local_save_flags(void)
65 {
66         return native_save_fl();
67 }
68
69 static inline void raw_local_irq_restore(unsigned long flags)
70 {
71         native_restore_fl(flags);
72 }
73
74 static inline void raw_local_irq_disable(void)
75 {
76         native_irq_disable();
77 }
78
79 static inline void raw_local_irq_enable(void)
80 {
81         native_irq_enable();
82 }
83
84 /*
85  * Used in the idle loop; sti takes one instruction cycle
86  * to complete:
87  */
88 static inline void raw_safe_halt(void)
89 {
90         native_safe_halt();
91 }
92
93 /*
94  * Used when interrupts are already enabled or to
95  * shutdown the processor:
96  */
97 static inline void halt(void)
98 {
99         native_halt();
100 }
101
102 /*
103  * For spinlocks, etc:
104  */
105 static inline unsigned long __raw_local_irq_save(void)
106 {
107         unsigned long flags = __raw_local_save_flags();
108
109         raw_local_irq_disable();
110
111         return flags;
112 }
113 #else
114
115 #define ENABLE_INTERRUPTS(x)    sti
116 #define DISABLE_INTERRUPTS(x)   cli
117
118 #ifdef CONFIG_X86_64
119 #define SWAPGS  swapgs
120 /*
121  * Currently paravirt can't handle swapgs nicely when we
122  * don't have a stack we can rely on (such as a user space
123  * stack).  So we either find a way around these or just fault
124  * and emulate if a guest tries to call swapgs directly.
125  *
126  * Either way, this is a good way to document that we don't
127  * have a reliable stack. x86_64 only.
128  */
129 #define SWAPGS_UNSAFE_STACK     swapgs
130
131 #define PARAVIRT_ADJUST_EXCEPTION_FRAME /*  */
132
133 #define INTERRUPT_RETURN        iretq
134 #define USERGS_SYSRET64                         \
135         swapgs;                                 \
136         sysretq;
137 #define USERGS_SYSRET32                         \
138         swapgs;                                 \
139         sysretl
140 #define ENABLE_INTERRUPTS_SYSEXIT32             \
141         swapgs;                                 \
142         sti;                                    \
143         sysexit
144
145 #else
146 #define INTERRUPT_RETURN                iret
147 #define ENABLE_INTERRUPTS_SYSEXIT       sti; sysexit
148 #define GET_CR0_INTO_EAX                movl %cr0, %eax
149 #endif
150
151
152 #endif /* __ASSEMBLY__ */
153 #endif /* CONFIG_PARAVIRT */
154
155 #ifndef __ASSEMBLY__
156 #define raw_local_save_flags(flags)                             \
157         do { (flags) = __raw_local_save_flags(); } while (0)
158
159 #define raw_local_irq_save(flags)                               \
160         do { (flags) = __raw_local_irq_save(); } while (0)
161
162 static inline int raw_irqs_disabled_flags(unsigned long flags)
163 {
164         return !(flags & X86_EFLAGS_IF);
165 }
166
167 static inline int raw_irqs_disabled(void)
168 {
169         unsigned long flags = __raw_local_save_flags();
170
171         return raw_irqs_disabled_flags(flags);
172 }
173
174 #else
175
176 #ifdef CONFIG_X86_64
177 #define ARCH_LOCKDEP_SYS_EXIT           call lockdep_sys_exit_thunk
178 #define ARCH_LOCKDEP_SYS_EXIT_IRQ       \
179         TRACE_IRQS_ON; \
180         sti; \
181         SAVE_REST; \
182         LOCKDEP_SYS_EXIT; \
183         RESTORE_REST; \
184         cli; \
185         TRACE_IRQS_OFF;
186
187 #else
188 #define ARCH_LOCKDEP_SYS_EXIT                   \
189         pushl %eax;                             \
190         pushl %ecx;                             \
191         pushl %edx;                             \
192         call lockdep_sys_exit;                  \
193         popl %edx;                              \
194         popl %ecx;                              \
195         popl %eax;
196
197 #define ARCH_LOCKDEP_SYS_EXIT_IRQ
198 #endif
199
200 #ifdef CONFIG_TRACE_IRQFLAGS
201 #  define TRACE_IRQS_ON         call trace_hardirqs_on_thunk;
202 #  define TRACE_IRQS_OFF        call trace_hardirqs_off_thunk;
203 #else
204 #  define TRACE_IRQS_ON
205 #  define TRACE_IRQS_OFF
206 #endif
207 #ifdef CONFIG_DEBUG_LOCK_ALLOC
208 #  define LOCKDEP_SYS_EXIT      ARCH_LOCKDEP_SYS_EXIT
209 #  define LOCKDEP_SYS_EXIT_IRQ  ARCH_LOCKDEP_SYS_EXIT_IRQ
210 # else
211 #  define LOCKDEP_SYS_EXIT
212 #  define LOCKDEP_SYS_EXIT_IRQ
213 # endif
214
215 #endif /* __ASSEMBLY__ */
216 #endif