Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
[pandora-kernel.git] / arch / powerpc / platforms / pseries / smp.c
1 /*
2  * SMP support for pSeries machines.
3  *
4  * Dave Engebretsen, Peter Bergner, and
5  * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
6  *
7  * Plus various changes from other IBM teams...
8  *
9  *      This program is free software; you can redistribute it and/or
10  *      modify it under the terms of the GNU General Public License
11  *      as published by the Free Software Foundation; either version
12  *      2 of the License, or (at your option) any later version.
13  */
14
15
16 #include <linux/kernel.h>
17 #include <linux/sched.h>
18 #include <linux/smp.h>
19 #include <linux/interrupt.h>
20 #include <linux/delay.h>
21 #include <linux/init.h>
22 #include <linux/spinlock.h>
23 #include <linux/cache.h>
24 #include <linux/err.h>
25 #include <linux/sysdev.h>
26 #include <linux/cpu.h>
27
28 #include <asm/ptrace.h>
29 #include <linux/atomic.h>
30 #include <asm/irq.h>
31 #include <asm/page.h>
32 #include <asm/pgtable.h>
33 #include <asm/io.h>
34 #include <asm/prom.h>
35 #include <asm/smp.h>
36 #include <asm/paca.h>
37 #include <asm/machdep.h>
38 #include <asm/cputable.h>
39 #include <asm/firmware.h>
40 #include <asm/system.h>
41 #include <asm/rtas.h>
42 #include <asm/pSeries_reconfig.h>
43 #include <asm/mpic.h>
44 #include <asm/vdso_datapage.h>
45 #include <asm/cputhreads.h>
46 #include <asm/xics.h>
47
48 #include "plpar_wrappers.h"
49 #include "pseries.h"
50 #include "offline_states.h"
51
52
53 /*
54  * The Primary thread of each non-boot processor was started from the OF client
55  * interface by prom_hold_cpus and is spinning on secondary_hold_spinloop.
56  */
57 static cpumask_var_t of_spin_mask;
58
59 /* Query where a cpu is now.  Return codes #defined in plpar_wrappers.h */
60 int smp_query_cpu_stopped(unsigned int pcpu)
61 {
62         int cpu_status, status;
63         int qcss_tok = rtas_token("query-cpu-stopped-state");
64
65         if (qcss_tok == RTAS_UNKNOWN_SERVICE) {
66                 printk_once(KERN_INFO
67                         "Firmware doesn't support query-cpu-stopped-state\n");
68                 return QCSS_HARDWARE_ERROR;
69         }
70
71         status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu);
72         if (status != 0) {
73                 printk(KERN_ERR
74                        "RTAS query-cpu-stopped-state failed: %i\n", status);
75                 return status;
76         }
77
78         return cpu_status;
79 }
80
81 /**
82  * smp_startup_cpu() - start the given cpu
83  *
84  * At boot time, there is nothing to do for primary threads which were
85  * started from Open Firmware.  For anything else, call RTAS with the
86  * appropriate start location.
87  *
88  * Returns:
89  *      0       - failure
90  *      1       - success
91  */
92 static inline int __devinit smp_startup_cpu(unsigned int lcpu)
93 {
94         int status;
95         unsigned long start_here = __pa((u32)*((unsigned long *)
96                                                generic_secondary_smp_init));
97         unsigned int pcpu;
98         int start_cpu;
99
100         if (cpumask_test_cpu(lcpu, of_spin_mask))
101                 /* Already started by OF and sitting in spin loop */
102                 return 1;
103
104         pcpu = get_hard_smp_processor_id(lcpu);
105
106         /* Check to see if the CPU out of FW already for kexec */
107         if (smp_query_cpu_stopped(pcpu) == QCSS_NOT_STOPPED){
108                 cpumask_set_cpu(lcpu, of_spin_mask);
109                 return 1;
110         }
111
112         /* Fixup atomic count: it exited inside IRQ handler. */
113         task_thread_info(paca[lcpu].__current)->preempt_count   = 0;
114 #ifdef CONFIG_HOTPLUG_CPU
115         if (get_cpu_current_state(lcpu) == CPU_STATE_INACTIVE)
116                 goto out;
117 #endif
118         /* 
119          * If the RTAS start-cpu token does not exist then presume the
120          * cpu is already spinning.
121          */
122         start_cpu = rtas_token("start-cpu");
123         if (start_cpu == RTAS_UNKNOWN_SERVICE)
124                 return 1;
125
126         status = rtas_call(start_cpu, 3, 1, NULL, pcpu, start_here, pcpu);
127         if (status != 0) {
128                 printk(KERN_ERR "start-cpu failed: %i\n", status);
129                 return 0;
130         }
131
132 #ifdef CONFIG_HOTPLUG_CPU
133 out:
134 #endif
135         return 1;
136 }
137
138 static void __devinit smp_xics_setup_cpu(int cpu)
139 {
140         if (cpu != boot_cpuid)
141                 xics_setup_cpu();
142
143         if (firmware_has_feature(FW_FEATURE_SPLPAR))
144                 vpa_init(cpu);
145
146         cpumask_clear_cpu(cpu, of_spin_mask);
147 #ifdef CONFIG_HOTPLUG_CPU
148         set_cpu_current_state(cpu, CPU_STATE_ONLINE);
149         set_default_offline_state(cpu);
150 #endif
151 }
152
153 static int __devinit smp_pSeries_kick_cpu(int nr)
154 {
155         BUG_ON(nr < 0 || nr >= NR_CPUS);
156
157         if (!smp_startup_cpu(nr))
158                 return -ENOENT;
159
160         /*
161          * The processor is currently spinning, waiting for the
162          * cpu_start field to become non-zero After we set cpu_start,
163          * the processor will continue on to secondary_start
164          */
165         paca[nr].cpu_start = 1;
166 #ifdef CONFIG_HOTPLUG_CPU
167         set_preferred_offline_state(nr, CPU_STATE_ONLINE);
168
169         if (get_cpu_current_state(nr) == CPU_STATE_INACTIVE) {
170                 long rc;
171                 unsigned long hcpuid;
172
173                 hcpuid = get_hard_smp_processor_id(nr);
174                 rc = plpar_hcall_norets(H_PROD, hcpuid);
175                 if (rc != H_SUCCESS)
176                         printk(KERN_ERR "Error: Prod to wake up processor %d "
177                                                 "Ret= %ld\n", nr, rc);
178         }
179 #endif
180
181         return 0;
182 }
183
184 static int smp_pSeries_cpu_bootable(unsigned int nr)
185 {
186         /* Special case - we inhibit secondary thread startup
187          * during boot if the user requests it.
188          */
189         if (system_state < SYSTEM_RUNNING && cpu_has_feature(CPU_FTR_SMT)) {
190                 if (!smt_enabled_at_boot && cpu_thread_in_core(nr) != 0)
191                         return 0;
192                 if (smt_enabled_at_boot
193                     && cpu_thread_in_core(nr) >= smt_enabled_at_boot)
194                         return 0;
195         }
196
197         return 1;
198 }
199
200 static struct smp_ops_t pSeries_mpic_smp_ops = {
201         .message_pass   = smp_mpic_message_pass,
202         .probe          = smp_mpic_probe,
203         .kick_cpu       = smp_pSeries_kick_cpu,
204         .setup_cpu      = smp_mpic_setup_cpu,
205 };
206
207 static struct smp_ops_t pSeries_xics_smp_ops = {
208         .message_pass   = NULL, /* Use smp_muxed_ipi_message_pass */
209         .cause_ipi      = NULL, /* Filled at runtime by xics_smp_probe() */
210         .probe          = xics_smp_probe,
211         .kick_cpu       = smp_pSeries_kick_cpu,
212         .setup_cpu      = smp_xics_setup_cpu,
213         .cpu_bootable   = smp_pSeries_cpu_bootable,
214 };
215
216 /* This is called very early */
217 static void __init smp_init_pseries(void)
218 {
219         int i;
220
221         pr_debug(" -> smp_init_pSeries()\n");
222
223         alloc_bootmem_cpumask_var(&of_spin_mask);
224
225         /* Mark threads which are still spinning in hold loops. */
226         if (cpu_has_feature(CPU_FTR_SMT)) {
227                 for_each_present_cpu(i) { 
228                         if (cpu_thread_in_core(i) == 0)
229                                 cpumask_set_cpu(i, of_spin_mask);
230                 }
231         } else {
232                 cpumask_copy(of_spin_mask, cpu_present_mask);
233         }
234
235         cpumask_clear_cpu(boot_cpuid, of_spin_mask);
236
237         /* Non-lpar has additional take/give timebase */
238         if (rtas_token("freeze-time-base") != RTAS_UNKNOWN_SERVICE) {
239                 smp_ops->give_timebase = rtas_give_timebase;
240                 smp_ops->take_timebase = rtas_take_timebase;
241         }
242
243         pr_debug(" <- smp_init_pSeries()\n");
244 }
245
246 void __init smp_init_pseries_mpic(void)
247 {
248         smp_ops = &pSeries_mpic_smp_ops;
249
250         smp_init_pseries();
251 }
252
253 void __init smp_init_pseries_xics(void)
254 {
255         smp_ops = &pSeries_xics_smp_ops;
256
257         smp_init_pseries();
258 }