arch/powerpc/boot/dts/pcm032.dts

   1 /*
   2  * phyCORE-MPC5200B-IO (pcm032) board Device Tree Source
   3  *
   4  * Copyright (C) 2006-2009 Pengutronix
   5  * Sascha Hauer <s.hauer@pengutronix.de>
   6  * Juergen Beisert <j.beisert@pengutronix.de>
   7  * Wolfram Sang <w.sang@pengutronix.de>
   8  *
   9  * This program is free software; you can redistribute  it and/or modify it
  10  * under  the terms of  the GNU General  Public License as published by the
  11  * Free Software Foundation;  either version 2 of the  License, or (at your
  12  * option) any later version.
  13  */
  14
  15 /dts-v1/;
  16
  17 / {
  18         model = "phytec,pcm032";
  19         compatible = "phytec,pcm032";
  20         #address-cells = <1>;
  21         #size-cells = <1>;
  22         interrupt-parent = <&mpc5200_pic>;
  23
  24         cpus {
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27
  28                 PowerPC,5200@0 {
  29                         device_type = "cpu";
  30                         reg = <0>;
  31                         d-cache-line-size = <32>;
  32                         i-cache-line-size = <32>;
  33                         d-cache-size = <0x4000>;        // L1, 16K
  34                         i-cache-size = <0x4000>;        // L1, 16K
  35                         timebase-frequency = <0>;       // from bootloader
  36                         bus-frequency = <0>;            // from bootloader
  37                         clock-frequency = <0>;          // from bootloader
  38                 };
  39         };
  40
  41         memory {
  42                 device_type = "memory";
  43                 reg = <0x00000000 0x08000000>;  // 128MB
  44         };
  45
  46         soc5200@f0000000 {
  47                 #address-cells = <1>;
  48                 #size-cells = <1>;
  49                 compatible = "fsl,mpc5200b-immr";
  50                 ranges = <0 0xf0000000 0x0000c000>;
  51                 bus-frequency = <0>;            // from bootloader
  52                 system-frequency = <0>;         // from bootloader
  53
  54                 cdm@200 {
  55                         compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
  56                         reg = <0x200 0x38>;
  57                 };
  58
  59                 mpc5200_pic: interrupt-controller@500 {
  60                         // 5200 interrupts are encoded into two levels;
  61                         interrupt-controller;
  62                         #interrupt-cells = <3>;
  63                         compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
  64                         reg = <0x500 0x80>;
  65                 };
  66
  67                 timer@600 {     // General Purpose Timer
  68                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  69                         reg = <0x600 0x10>;
  70                         interrupts = <1 9 0>;
  71                         fsl,has-wdt;
  72                 };
  73
  74                 timer@610 {     // General Purpose Timer
  75                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  76                         reg = <0x610 0x10>;
  77                         interrupts = <1 10 0>;
  78                 };
  79
  80                 gpt2: timer@620 {       // General Purpose Timer in GPIO mode
  81                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  82                         reg = <0x620 0x10>;
  83                         interrupts = <1 11 0>;
  84                         gpio-controller;
  85                         #gpio-cells = <2>;
  86                 };
  87
  88                 gpt3: timer@630 {       // General Purpose Timer in GPIO mode
  89                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  90                         reg = <0x630 0x10>;
  91                         interrupts = <1 12 0>;
  92                         gpio-controller;
  93                         #gpio-cells = <2>;
  94                 };
  95
  96                 gpt4: timer@640 {       // General Purpose Timer in GPIO mode
  97                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
  98                         reg = <0x640 0x10>;
  99                         interrupts = <1 13 0>;
 100                         gpio-controller;
 101                         #gpio-cells = <2>;
 102                 };
 103
 104                 gpt5: timer@650 {       // General Purpose Timer in GPIO mode
 105                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 106                         reg = <0x650 0x10>;
 107                         interrupts = <1 14 0>;
 108                         gpio-controller;
 109                         #gpio-cells = <2>;
 110                 };
 111
 112                 gpt6: timer@660 {       // General Purpose Timer in GPIO mode
 113                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 114                         reg = <0x660 0x10>;
 115                         interrupts = <1 15 0>;
 116                         gpio-controller;
 117                         #gpio-cells = <2>;
 118                 };
 119
 120                 gpt7: timer@670 {       // General Purpose Timer in GPIO mode
 121                         compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 122                         reg = <0x670 0x10>;
 123                         interrupts = <1 16 0>;
 124                         gpio-controller;
 125                         #gpio-cells = <2>;
 126                 };
 127
 128                 rtc@800 {       // Real time clock
 129                         compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
 130                         reg = <0x800 0x100>;
 131                         interrupts = <1 5 0 1 6 0>;
 132                 };
 133
 134                 can@900 {
 135                         compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
 136                         interrupts = <2 17 0>;
 137                         reg = <0x900 0x80>;
 138                 };
 139
 140                 can@980 {
 141                         compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
 142                         interrupts = <2 18 0>;
 143                         reg = <0x980 0x80>;
 144                 };
 145
 146                 gpio_simple: gpio@b00 {
 147                         compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
 148                         reg = <0xb00 0x40>;
 149                         interrupts = <1 7 0>;
 150                         gpio-controller;
 151                         #gpio-cells = <2>;
 152                 };
 153
 154                 gpio_wkup: gpio@c00 {
 155                         compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
 156                         reg = <0xc00 0x40>;
 157                         interrupts = <1 8 0 0 3 0>;
 158                         gpio-controller;
 159                         #gpio-cells = <2>;
 160                 };
 161
 162                 spi@f00 {
 163                         compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
 164                         reg = <0xf00 0x20>;
 165                         interrupts = <2 13 0 2 14 0>;
 166                 };
 167
 168                 usb@1000 {
 169                         compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
 170                         reg = <0x1000 0xff>;
 171                         interrupts = <2 6 0>;
 172                 };
 173
 174                 dma-controller@1200 {
 175                         compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
 176                         reg = <0x1200 0x80>;
 177                         interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
 178                                       3 4 0  3 5 0  3 6 0  3 7 0
 179                                       3 8 0  3 9 0  3 10 0  3 11 0
 180                                       3 12 0  3 13 0  3 14 0  3 15 0>;
 181                 };
 182
 183                 xlb@1f00 {
 184                         compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
 185                         reg = <0x1f00 0x100>;
 186                 };
 187
 188                 ac97@2000 {     /* PSC1 is ac97 */
 189                         compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
 190                         cell-index = <0>;
 191                         reg = <0x2000 0x100>;
 192                         interrupts = <2 1 0>;
 193                 };
 194
 195                 /* PSC2 port is used by CAN1/2 */
 196
 197                 serial@2400 { /* PSC3 in UART mode */
 198                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 199                         cell-index = <2>;
 200                         reg = <0x2400 0x100>;
 201                         interrupts = <2 3 0>;
 202                 };
 203
 204                 /* PSC4 is ??? */
 205
 206                 /* PSC5 is ??? */
 207
 208                 serial@2c00 { /* PSC6 in UART mode */
 209                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 210                         cell-index = <5>;
 211                         reg = <0x2c00 0x100>;
 212                         interrupts = <2 4 0>;
 213                 };
 214
 215                 ethernet@3000 {
 216                         compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
 217                         reg = <0x3000 0x400>;
 218                         local-mac-address = [ 00 00 00 00 00 00 ];
 219                         interrupts = <2 5 0>;
 220                         phy-handle = <&phy0>;
 221                 };
 222
 223                 mdio@3000 {
 224                         #address-cells = <1>;
 225                         #size-cells = <0>;
 226                         compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
 227                         reg = <0x3000 0x400>;   // fec range, since we need to setup fec interrupts
 228                         interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
 229
 230                         phy0: ethernet-phy@0 {
 231                                 reg = <0>;
 232                         };
 233                 };
 234
 235                 ata@3a00 {
 236                         compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
 237                         reg = <0x3a00 0x100>;
 238                         interrupts = <2 7 0>;
 239                 };
 240
 241                 i2c@3d00 {
 242                         #address-cells = <1>;
 243                         #size-cells = <0>;
 244                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 245                         reg = <0x3d00 0x40>;
 246                         interrupts = <2 15 0>;
 247                 };
 248
 249                 i2c@3d40 {
 250                         #address-cells = <1>;
 251                         #size-cells = <0>;
 252                         compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 253                         reg = <0x3d40 0x40>;
 254                         interrupts = <2 16 0>;
 255                         rtc@51 {
 256                                 compatible = "nxp,pcf8563";
 257                                 reg = <0x51>;
 258                         };
 259                         eeprom@52 {
 260                                 compatible = "at24,24c32";
 261                                 reg = <0x52>;
 262                         };
 263                 };
 264
 265                 sram@8000 {
 266                         compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
 267                         reg = <0x8000 0x4000>;
 268                 };
 269         };
 270
 271         pci@f0000d00 {
 272                 #interrupt-cells = <1>;
 273                 #size-cells = <2>;
 274                 #address-cells = <3>;
 275                 device_type = "pci";
 276                 compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
 277                 reg = <0xf0000d00 0x100>;
 278                 interrupt-map-mask = <0xf800 0 0 7>;
 279                 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
 280                                  0xc000 0 0 2 &mpc5200_pic 1 1 3
 281                                  0xc000 0 0 3 &mpc5200_pic 1 2 3
 282                                  0xc000 0 0 4 &mpc5200_pic 1 3 3
 283
 284                                  0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
 285                                  0xc800 0 0 2 &mpc5200_pic 1 2 3
 286                                  0xc800 0 0 3 &mpc5200_pic 1 3 3
 287                                  0xc800 0 0 4 &mpc5200_pic 0 0 3>;
 288                 clock-frequency = <0>; // From boot loader
 289                 interrupts = <2 8 0 2 9 0 2 10 0>;
 290                 bus-range = <0 0>;
 291                 ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
 292                           0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 293                           0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 294         };
 295
 296         localbus {
 297                 compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
 298
 299                 #address-cells = <2>;
 300                 #size-cells = <1>;
 301
 302                 ranges = <0 0 0xfe000000 0x02000000
 303                           1 0 0xfc000000 0x02000000
 304                           2 0 0xfbe00000 0x00200000
 305                           3 0 0xf9e00000 0x02000000
 306                           4 0 0xf7e00000 0x02000000
 307                           5 0 0xe6000000 0x02000000
 308                           6 0 0xe8000000 0x02000000
 309                           7 0 0xea000000 0x02000000>;
 310
 311                 flash@0,0 {
 312                         compatible = "cfi-flash";
 313                         reg = <0 0 0x02000000>;
 314                         bank-width = <4>;
 315                         #size-cells = <1>;
 316                         #address-cells = <1>;
 317
 318                         partition@0 {
 319                                 label = "ubootl";
 320                                 reg = <0x00000000 0x00040000>;
 321                         };
 322                         partition@40000 {
 323                                 label = "kernel";
 324                                 reg = <0x00040000 0x001c0000>;
 325                         };
 326                         partition@200000 {
 327                                 label = "jffs2";
 328                                 reg = <0x00200000 0x01d00000>;
 329                         };
 330                         partition@1f00000 {
 331                                 label = "uboot";
 332                                 reg = <0x01f00000 0x00040000>;
 333                         };
 334                         partition@1f40000 {
 335                                 label = "env";
 336                                 reg = <0x01f40000 0x00040000>;
 337                         };
 338                         partition@1f80000 {
 339                                 label = "oftree";
 340                                 reg = <0x01f80000 0x00040000>;
 341                         };
 342                         partition@1fc0000 {
 343                                 label = "space";
 344                                 reg = <0x01fc0000 0x00040000>;
 345                         };
 346                 };
 347
 348                 sram@2,0 {
 349                         compatible = "mtd-ram";
 350                         reg = <2 0 0x00200000>;
 351                         bank-width = <2>;
 352                 };
 353
 354                 /*
 355                  * example snippets for FPGA
 356                  *
 357                  * fpga@3,0 {
 358                  *         compatible = "fpga_driver";
 359                  *         reg = <3 0 0x02000000>;
 360                  *         bank-width = <4>;
 361                  * };
 362                  *
 363                  * fpga@4,0 {
 364                  *         compatible = "fpga_driver";
 365                  *         reg = <4 0 0x02000000>;
 366                  *         bank-width = <4>;
 367                  * };
 368                  */
 369
 370                 /*
 371                  * example snippets for free chipselects
 372                  *
 373                  * device@5,0 {
 374                  *         compatible = "custom_driver";
 375                  *         reg = <5 0 0x02000000>;
 376                  * };
 377                  *
 378                  * device@6,0 {
 379                  *         compatible = "custom_driver";
 380                  *         reg = <6 0 0x02000000>;
 381                  * };
 382                  *
 383                  * device@7,0 {
 384                  *         compatible = "custom_driver";
 385                  *         reg = <7 0 0x02000000>;
 386                  * };
 387                  */
 388         };
 389 };
 390