arch/powerpc/boot/dts/mpc885ads.dts

   1 /*
   2  * MPC885 ADS Device Tree Source
   3  *
   4  * Copyright 2006 MontaVista Software, Inc.
   5  * Copyright 2007 Freescale Semiconductor, Inc.
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  */
  12
  13
  14 / {
  15         model = "MPC885ADS";
  16         compatible = "fsl,mpc885ads";
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19
  20         cpus {
  21                 #address-cells = <1>;
  22                 #size-cells = <0>;
  23
  24                 PowerPC,885@0 {
  25                         device_type = "cpu";
  26                         reg = <0>;
  27                         d-cache-line-size = <d#16>;
  28                         i-cache-line-size = <d#16>;
  29                         d-cache-size = <d#8192>;
  30                         i-cache-size = <d#8192>;
  31                         timebase-frequency = <0>;
  32                         bus-frequency = <0>;
  33                         clock-frequency = <0>;
  34                         interrupts = <f 2>;     // decrementer interrupt
  35                         interrupt-parent = <&PIC>;
  36                 };
  37         };
  38
  39         memory {
  40                 device_type = "memory";
  41                 reg = <0 0>;
  42         };
  43
  44         localbus@ff000100 {
  45                 compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
  46                 #address-cells = <2>;
  47                 #size-cells = <1>;
  48                 reg = <ff000100 40>;
  49
  50                 ranges = <
  51                         0 0 fe000000 00800000
  52                         1 0 ff080000 00008000
  53                         5 0 ff0a0000 00008000
  54                 >;
  55
  56                 flash@0,0 {
  57                         compatible = "jedec-flash";
  58                         reg = <0 0 800000>;
  59                         bank-width = <4>;
  60                         device-width = <1>;
  61                 };
  62
  63                 board-control@1,0 {
  64                         reg = <1 0 20 5 300 4>;
  65                         compatible = "fsl,mpc885ads-bcsr";
  66                 };
  67         };
  68
  69         soc@ff000000 {
  70                 compatible = "fsl,mpc885", "fsl,pq1-soc";
  71                 #address-cells = <1>;
  72                 #size-cells = <1>;
  73                 device_type = "soc";
  74                 ranges = <0 ff000000 00004000>;
  75                 bus-frequency = <0>;
  76
  77                 // Temporary -- will go away once kernel uses ranges for get_immrbase().
  78                 reg = <ff000000 4000>;
  79
  80                 mdio@e00 {
  81                         compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
  82                         reg = <e00 188>;
  83                         #address-cells = <1>;
  84                         #size-cells = <0>;
  85
  86                         PHY0: ethernet-phy@0 {
  87                                 reg = <0>;
  88                                 device_type = "ethernet-phy";
  89                         };
  90
  91                         PHY1: ethernet-phy@1 {
  92                                 reg = <1>;
  93                                 device_type = "ethernet-phy";
  94                         };
  95
  96                         PHY2: ethernet-phy@2 {
  97                                 reg = <2>;
  98                                 device_type = "ethernet-phy";
  99                         };
 100                 };
 101
 102                 ethernet@e00 {
 103                         device_type = "network";
 104                         compatible = "fsl,mpc885-fec-enet",
 105                                      "fsl,pq1-fec-enet";
 106                         reg = <e00 188>;
 107                         local-mac-address = [ 00 00 00 00 00 00 ];
 108                         interrupts = <3 1>;
 109                         interrupt-parent = <&PIC>;
 110                         phy-handle = <&PHY0>;
 111                         linux,network-index = <0>;
 112                 };
 113
 114                 ethernet@1e00 {
 115                         device_type = "network";
 116                         compatible = "fsl,mpc885-fec-enet",
 117                                      "fsl,pq1-fec-enet";
 118                         reg = <1e00 188>;
 119                         local-mac-address = [ 00 00 00 00 00 00 ];
 120                         interrupts = <7 1>;
 121                         interrupt-parent = <&PIC>;
 122                         phy-handle = <&PHY1>;
 123                         linux,network-index = <1>;
 124                 };
 125
 126                 PIC: interrupt-controller@0 {
 127                         interrupt-controller;
 128                         #interrupt-cells = <2>;
 129                         reg = <0 24>;
 130                         compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
 131                 };
 132
 133                 pcmcia@80 {
 134                         #address-cells = <3>;
 135                         #interrupt-cells = <1>;
 136                         #size-cells = <2>;
 137                         compatible = "fsl,pq-pcmcia";
 138                         device_type = "pcmcia";
 139                         reg = <80 80>;
 140                         interrupt-parent = <&PIC>;
 141                         interrupts = <d 1>;
 142                 };
 143
 144                 cpm@9c0 {
 145                         #address-cells = <1>;
 146                         #size-cells = <1>;
 147                         compatible = "fsl,mpc885-cpm", "fsl,cpm1";
 148                         command-proc = <9c0>;
 149                         interrupts = <0>;       // cpm error interrupt
 150                         interrupt-parent = <&CPM_PIC>;
 151                         reg = <9c0 40>;
 152                         ranges;
 153
 154                         muram@2000 {
 155                                 #address-cells = <1>;
 156                                 #size-cells = <1>;
 157                                 ranges = <0 2000 2000>;
 158
 159                                 data@0 {
 160                                         compatible = "fsl,cpm-muram-data";
 161                                         reg = <0 1c00>;
 162                                 };
 163                         };
 164
 165                         brg@9f0 {
 166                                 compatible = "fsl,mpc885-brg",
 167                                              "fsl,cpm1-brg",
 168                                              "fsl,cpm-brg";
 169                                 clock-frequency = <0>;
 170                                 reg = <9f0 10>;
 171                         };
 172
 173                         CPM_PIC: interrupt-controller@930 {
 174                                 interrupt-controller;
 175                                 #interrupt-cells = <1>;
 176                                 interrupts = <5 2 0 2>;
 177                                 interrupt-parent = <&PIC>;
 178                                 reg = <930 20>;
 179                                 compatible = "fsl,mpc885-cpm-pic",
 180                                              "fsl,cpm1-pic";
 181                         };
 182
 183                         serial@a80 {
 184                                 device_type = "serial";
 185                                 compatible = "fsl,mpc885-smc-uart",
 186                                              "fsl,cpm1-smc-uart";
 187                                 reg = <a80 10 3e80 40>;
 188                                 interrupts = <4>;
 189                                 interrupt-parent = <&CPM_PIC>;
 190                                 fsl,cpm-brg = <1>;
 191                                 fsl,cpm-command = <0090>;
 192                         };
 193
 194                         serial@a90 {
 195                                 device_type = "serial";
 196                                 compatible = "fsl,mpc885-smc-uart",
 197                                              "fsl,cpm1-smc-uart";
 198                                 reg = <a90 10 3f80 40>;
 199                                 interrupts = <3>;
 200                                 interrupt-parent = <&CPM_PIC>;
 201                                 fsl,cpm-brg = <2>;
 202                                 fsl,cpm-command = <00d0>;
 203                         };
 204
 205                         ethernet@a40 {
 206                                 device_type = "network";
 207                                 compatible = "fsl,mpc885-scc-enet",
 208                                              "fsl,cpm1-scc-enet";
 209                                 reg = <a40 18 3e00 100>;
 210                                 local-mac-address = [ 00 00 00 00 00 00 ];
 211                                 interrupts = <1c>;
 212                                 interrupt-parent = <&CPM_PIC>;
 213                                 phy-handle = <&PHY2>;
 214                                 fsl,cpm-command = <0080>;
 215                                 linux,network-index = <2>;
 216                         };
 217                 };
 218         };
 219
 220         chosen {
 221                 linux,stdout-path = "/soc/cpm/serial@a80";
 222         };
 223 };