arch/mips/powertv/asic/asic-calliope.c

   1 /*
   2  * Locations of devices in the Calliope ASIC.
   3  *
   4  * Copyright (C) 2005-2009 Scientific-Atlanta, Inc.
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or
   9  * (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  19  *
  20  * Author:       Ken Eppinett
  21  *               David Schleef <ds@schleef.org>
  22  *
  23  * Description:  Defines the platform resources for the SA settop.
  24  */
  25
  26 #include <asm/mach-powertv/asic.h>
  27
  28 const struct register_map calliope_register_map = {
  29         .eic_slow0_strt_add = 0x800000,
  30         .eic_cfg_bits = 0x800038,
  31         .eic_ready_status = 0x80004c,
  32
  33         .chipver3 = 0xA00800,
  34         .chipver2 = 0xA00804,
  35         .chipver1 = 0xA00808,
  36         .chipver0 = 0xA0080c,
  37
  38         /* The registers of IRBlaster */
  39         .uart1_intstat = 0xA01800,
  40         .uart1_inten = 0xA01804,
  41         .uart1_config1 = 0xA01808,
  42         .uart1_config2 = 0xA0180C,
  43         .uart1_divisorhi = 0xA01810,
  44         .uart1_divisorlo = 0xA01814,
  45         .uart1_data = 0xA01818,
  46         .uart1_status = 0xA0181C,
  47
  48         .int_stat_3 = 0xA02800,
  49         .int_stat_2 = 0xA02804,
  50         .int_stat_1 = 0xA02808,
  51         .int_stat_0 = 0xA0280c,
  52         .int_config = 0xA02810,
  53         .int_int_scan = 0xA02818,
  54         .ien_int_3 = 0xA02830,
  55         .ien_int_2 = 0xA02834,
  56         .ien_int_1 = 0xA02838,
  57         .ien_int_0 = 0xA0283c,
  58         .int_level_3_3 = 0xA02880,
  59         .int_level_3_2 = 0xA02884,
  60         .int_level_3_1 = 0xA02888,
  61         .int_level_3_0 = 0xA0288c,
  62         .int_level_2_3 = 0xA02890,
  63         .int_level_2_2 = 0xA02894,
  64         .int_level_2_1 = 0xA02898,
  65         .int_level_2_0 = 0xA0289c,
  66         .int_level_1_3 = 0xA028a0,
  67         .int_level_1_2 = 0xA028a4,
  68         .int_level_1_1 = 0xA028a8,
  69         .int_level_1_0 = 0xA028ac,
  70         .int_level_0_3 = 0xA028b0,
  71         .int_level_0_2 = 0xA028b4,
  72         .int_level_0_1 = 0xA028b8,
  73         .int_level_0_0 = 0xA028bc,
  74         .int_docsis_en = 0xA028F4,
  75
  76         .mips_pll_setup = 0x980000,
  77         .usb_fs = 0x980030,             /* -default 72800028- */
  78         .test_bus = 0x9800CC,
  79         .crt_spare = 0x9800d4,
  80         .usb2_ohci_int_mask = 0x9A000c,
  81         .usb2_strap = 0x9A0014,
  82         .ehci_hcapbase = 0x9BFE00,
  83         .ohci_hc_revision = 0x9BFC00,
  84         .bcm1_bs_lmi_steer = 0x9E0004,
  85         .usb2_control = 0x9E0054,
  86         .usb2_stbus_obc = 0x9BFF00,
  87         .usb2_stbus_mess_size = 0x9BFF04,
  88         .usb2_stbus_chunk_size = 0x9BFF08,
  89
  90         .pcie_regs = 0x000000,          /* -doesn't exist- */
  91         .tim_ch = 0xA02C10,
  92         .tim_cl = 0xA02C14,
  93         .gpio_dout = 0xA02c20,
  94         .gpio_din = 0xA02c24,
  95         .gpio_dir = 0xA02c2C,
  96         .watchdog = 0xA02c30,
  97         .front_panel = 0x000000,        /* -not used- */
  98 };