Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
[pandora-kernel.git] / arch / m68knommu / platform / coldfire / timers.c
1 /***************************************************************************/
2
3 /*
4  *      timers.c -- generic ColdFire hardware timer support.
5  *
6  *      Copyright (C) 1999-2008, Greg Ungerer <gerg@snapgear.com>
7  */
8
9 /***************************************************************************/
10
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/sched.h>
14 #include <linux/interrupt.h>
15 #include <linux/irq.h>
16 #include <linux/profile.h>
17 #include <linux/clocksource.h>
18 #include <asm/io.h>
19 #include <asm/traps.h>
20 #include <asm/machdep.h>
21 #include <asm/coldfire.h>
22 #include <asm/mcftimer.h>
23 #include <asm/mcfsim.h>
24
25 /***************************************************************************/
26
27 /*
28  *      By default use timer1 as the system clock timer.
29  */
30 #define FREQ    (MCF_BUSCLK / 16)
31 #define TA(a)   (MCF_MBAR + MCFTIMER_BASE1 + (a))
32
33 /*
34  *      Default the timer and vector to use for ColdFire. Some ColdFire
35  *      CPU's and some boards may want different. Their sub-architecture
36  *      startup code (in config.c) can change these if they want.
37  */
38 unsigned int    mcf_timervector = 29;
39 unsigned int    mcf_profilevector = 31;
40 unsigned int    mcf_timerlevel = 5;
41
42 /*
43  *      These provide the underlying interrupt vector support.
44  *      Unfortunately it is a little different on each ColdFire.
45  */
46 extern void mcf_settimericr(int timer, int level);
47 void coldfire_profile_init(void);
48
49 #if defined(CONFIG_M532x)
50 #define __raw_readtrr   __raw_readl
51 #define __raw_writetrr  __raw_writel
52 #else
53 #define __raw_readtrr   __raw_readw
54 #define __raw_writetrr  __raw_writew
55 #endif
56
57 static u32 mcftmr_cycles_per_jiffy;
58 static u32 mcftmr_cnt;
59
60 /***************************************************************************/
61
62 static irqreturn_t mcftmr_tick(int irq, void *dummy)
63 {
64         /* Reset the ColdFire timer */
65         __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
66
67         mcftmr_cnt += mcftmr_cycles_per_jiffy;
68         return arch_timer_interrupt(irq, dummy);
69 }
70
71 /***************************************************************************/
72
73 static struct irqaction mcftmr_timer_irq = {
74         .name    = "timer",
75         .flags   = IRQF_DISABLED | IRQF_TIMER,
76         .handler = mcftmr_tick,
77 };
78
79 /***************************************************************************/
80
81 static cycle_t mcftmr_read_clk(void)
82 {
83         unsigned long flags;
84         u32 cycles;
85         u16 tcn;
86
87         local_irq_save(flags);
88         tcn = __raw_readw(TA(MCFTIMER_TCN));
89         cycles = mcftmr_cnt;
90         local_irq_restore(flags);
91
92         return cycles + tcn;
93 }
94
95 /***************************************************************************/
96
97 static struct clocksource mcftmr_clk = {
98         .name   = "tmr",
99         .rating = 250,
100         .read   = mcftmr_read_clk,
101         .shift  = 20,
102         .mask   = CLOCKSOURCE_MASK(32),
103         .flags  = CLOCK_SOURCE_IS_CONTINUOUS,
104 };
105
106 /***************************************************************************/
107
108 void hw_timer_init(void)
109 {
110         setup_irq(mcf_timervector, &mcftmr_timer_irq);
111
112         __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
113         mcftmr_cycles_per_jiffy = FREQ / HZ;
114         __raw_writetrr(mcftmr_cycles_per_jiffy, TA(MCFTIMER_TRR));
115         __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
116                 MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
117
118         mcftmr_clk.mult = clocksource_hz2mult(FREQ, mcftmr_clk.shift);
119         clocksource_register(&mcftmr_clk);
120
121         mcf_settimericr(1, mcf_timerlevel);
122
123 #ifdef CONFIG_HIGHPROFILE
124         coldfire_profile_init();
125 #endif
126 }
127
128 /***************************************************************************/
129 #ifdef CONFIG_HIGHPROFILE
130 /***************************************************************************/
131
132 /*
133  *      By default use timer2 as the profiler clock timer.
134  */
135 #define PA(a)   (MCF_MBAR + MCFTIMER_BASE2 + (a))
136
137 /*
138  *      Choose a reasonably fast profile timer. Make it an odd value to
139  *      try and get good coverage of kernel operations.
140  */
141 #define PROFILEHZ       1013
142
143 /*
144  *      Use the other timer to provide high accuracy profiling info.
145  */
146 irqreturn_t coldfire_profile_tick(int irq, void *dummy)
147 {
148         /* Reset ColdFire timer2 */
149         __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, PA(MCFTIMER_TER));
150         if (current->pid)
151                 profile_tick(CPU_PROFILING, regs);
152         return IRQ_HANDLED;
153 }
154
155 /***************************************************************************/
156
157 void coldfire_profile_init(void)
158 {
159         printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n", PROFILEHZ);
160
161         /* Set up TIMER 2 as high speed profile clock */
162         __raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
163
164         __raw_writetrr(((MCF_CLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
165         __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
166                 MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
167
168         request_irq(mcf_profilevector, coldfire_profile_tick,
169                 (IRQF_DISABLED | IRQ_FLG_FAST), "profile timer", NULL);
170         mcf_settimericr(2, 7);
171 }
172
173 /***************************************************************************/
174 #endif  /* CONFIG_HIGHPROFILE */
175 /***************************************************************************/