2 * linux/arch/m68k/kernel/setup.c
4 * Copyright (C) 1995 Hamish Macdonald
8 * This file handles the architecture-dependent parts of system setup
11 #include <linux/kernel.h>
13 #include <linux/sched.h>
14 #include <linux/delay.h>
15 #include <linux/interrupt.h>
17 #include <linux/console.h>
18 #include <linux/genhd.h>
19 #include <linux/errno.h>
20 #include <linux/string.h>
21 #include <linux/init.h>
22 #include <linux/bootmem.h>
23 #include <linux/proc_fs.h>
24 #include <linux/seq_file.h>
25 #include <linux/module.h>
26 #include <linux/initrd.h>
28 #include <asm/bootinfo.h>
29 #include <asm/sections.h>
30 #include <asm/setup.h>
34 #include <asm/machdep.h>
36 #include <asm/amigahw.h>
39 #include <asm/atarihw.h>
40 #include <asm/atari_stram.h>
45 #include <asm/natfeat.h>
47 #if !FPSTATESIZE || !NR_IRQS
48 #warning No CPU/platform type selected, your kernel will not work!
49 #warning Are you building an allnoconfig kernel?
52 unsigned long m68k_machtype;
53 EXPORT_SYMBOL(m68k_machtype);
54 unsigned long m68k_cputype;
55 EXPORT_SYMBOL(m68k_cputype);
56 unsigned long m68k_fputype;
57 unsigned long m68k_mmutype;
58 EXPORT_SYMBOL(m68k_mmutype);
60 unsigned long vme_brdtype;
61 EXPORT_SYMBOL(vme_brdtype);
65 EXPORT_SYMBOL(m68k_is040or060);
67 extern unsigned long availmem;
70 EXPORT_SYMBOL(m68k_num_memory);
71 int m68k_realnum_memory;
72 EXPORT_SYMBOL(m68k_realnum_memory);
73 unsigned long m68k_memoffset;
74 struct mem_info m68k_memory[NUM_MEMINFO];
75 EXPORT_SYMBOL(m68k_memory);
77 struct mem_info m68k_ramdisk;
79 static char m68k_command_line[CL_SIZE];
81 void (*mach_sched_init) (irq_handler_t handler) __initdata = NULL;
82 /* machine dependent irq functions */
83 void (*mach_init_IRQ) (void) __initdata = NULL;
84 void (*mach_get_model) (char *model);
85 void (*mach_get_hardware_list) (struct seq_file *m);
86 /* machine dependent timer functions */
87 unsigned long (*mach_gettimeoffset) (void);
88 int (*mach_hwclk) (int, struct rtc_time*);
89 EXPORT_SYMBOL(mach_hwclk);
90 int (*mach_set_clock_mmss) (unsigned long);
91 unsigned int (*mach_get_ss)(void);
92 int (*mach_get_rtc_pll)(struct rtc_pll_info *);
93 int (*mach_set_rtc_pll)(struct rtc_pll_info *);
94 EXPORT_SYMBOL(mach_get_ss);
95 EXPORT_SYMBOL(mach_get_rtc_pll);
96 EXPORT_SYMBOL(mach_set_rtc_pll);
97 void (*mach_reset)( void );
98 void (*mach_halt)( void );
99 void (*mach_power_off)( void );
100 long mach_max_dma_address = 0x00ffffff; /* default set to the lower 16MB */
101 #ifdef CONFIG_HEARTBEAT
102 void (*mach_heartbeat) (int);
103 EXPORT_SYMBOL(mach_heartbeat);
105 #ifdef CONFIG_M68K_L2_CACHE
106 void (*mach_l2_flush) (int);
108 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
109 void (*mach_beep)(unsigned int, unsigned int);
110 EXPORT_SYMBOL(mach_beep);
112 #if defined(CONFIG_ISA) && defined(MULTI_ISA)
115 EXPORT_SYMBOL(isa_type);
116 EXPORT_SYMBOL(isa_sex);
119 extern int amiga_parse_bootinfo(const struct bi_record *);
120 extern int atari_parse_bootinfo(const struct bi_record *);
121 extern int mac_parse_bootinfo(const struct bi_record *);
122 extern int q40_parse_bootinfo(const struct bi_record *);
123 extern int bvme6000_parse_bootinfo(const struct bi_record *);
124 extern int mvme16x_parse_bootinfo(const struct bi_record *);
125 extern int mvme147_parse_bootinfo(const struct bi_record *);
126 extern int hp300_parse_bootinfo(const struct bi_record *);
127 extern int apollo_parse_bootinfo(const struct bi_record *);
129 extern void config_amiga(void);
130 extern void config_atari(void);
131 extern void config_mac(void);
132 extern void config_sun3(void);
133 extern void config_apollo(void);
134 extern void config_mvme147(void);
135 extern void config_mvme16x(void);
136 extern void config_bvme6000(void);
137 extern void config_hp300(void);
138 extern void config_q40(void);
139 extern void config_sun3x(void);
141 #define MASK_256K 0xfffc0000
143 extern void paging_init(void);
145 static void __init m68k_parse_bootinfo(const struct bi_record *record)
147 while (record->tag != BI_LAST) {
149 const unsigned long *data = record->data;
151 switch (record->tag) {
156 /* Already set up by head.S */
160 if (m68k_num_memory < NUM_MEMINFO) {
161 m68k_memory[m68k_num_memory].addr = data[0];
162 m68k_memory[m68k_num_memory].size = data[1];
165 printk("m68k_parse_bootinfo: too many memory chunks\n");
169 m68k_ramdisk.addr = data[0];
170 m68k_ramdisk.size = data[1];
173 case BI_COMMAND_LINE:
174 strlcpy(m68k_command_line, (const char *)data,
175 sizeof(m68k_command_line));
180 unknown = amiga_parse_bootinfo(record);
181 else if (MACH_IS_ATARI)
182 unknown = atari_parse_bootinfo(record);
183 else if (MACH_IS_MAC)
184 unknown = mac_parse_bootinfo(record);
185 else if (MACH_IS_Q40)
186 unknown = q40_parse_bootinfo(record);
187 else if (MACH_IS_BVME6000)
188 unknown = bvme6000_parse_bootinfo(record);
189 else if (MACH_IS_MVME16x)
190 unknown = mvme16x_parse_bootinfo(record);
191 else if (MACH_IS_MVME147)
192 unknown = mvme147_parse_bootinfo(record);
193 else if (MACH_IS_HP300)
194 unknown = hp300_parse_bootinfo(record);
195 else if (MACH_IS_APOLLO)
196 unknown = apollo_parse_bootinfo(record);
201 printk("m68k_parse_bootinfo: unknown tag 0x%04x ignored\n",
203 record = (struct bi_record *)((unsigned long)record +
207 m68k_realnum_memory = m68k_num_memory;
208 #ifdef CONFIG_SINGLE_MEMORY_CHUNK
209 if (m68k_num_memory > 1) {
210 printk("Ignoring last %i chunks of physical memory\n",
211 (m68k_num_memory - 1));
217 void __init setup_arch(char **cmdline_p)
223 /* The bootinfo is located right after the kernel bss */
224 m68k_parse_bootinfo((const struct bi_record *)_end);
231 /* FIXME: m68k_fputype is passed in by Penguin booter, which can
232 * be confused by software FPU emulation. BEWARE.
233 * We should really do our own FPU check at startup.
234 * [what do we do with buggy 68LC040s? if we have problems
235 * with them, we should add a test to check_bugs() below] */
236 #ifndef CONFIG_M68KFPU_EMU_ONLY
237 /* clear the fpu if we have one */
238 if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060)) {
239 volatile int zero = 0;
240 asm volatile ("frestore %0" : : "m" (zero));
247 asm (".chip 68060; movec %%pcr,%0; .chip 68k"
249 if (((pcr >> 8) & 0xff) <= 5) {
250 printk("Enabling workaround for errata I14\n");
251 asm (".chip 68060; movec %0,%%pcr; .chip 68k"
252 : : "d" (pcr | 0x20));
256 init_mm.start_code = PAGE_OFFSET;
257 init_mm.end_code = (unsigned long)_etext;
258 init_mm.end_data = (unsigned long)_edata;
259 init_mm.brk = (unsigned long)_end;
261 *cmdline_p = m68k_command_line;
262 memcpy(boot_command_line, *cmdline_p, CL_SIZE);
266 #ifdef CONFIG_DUMMY_CONSOLE
267 conswitchp = &dummy_con;
270 switch (m68k_machtype) {
296 #ifdef CONFIG_MVME147
301 #ifdef CONFIG_MVME16x
306 #ifdef CONFIG_BVME6000
327 panic("No configuration setup");
330 #ifdef CONFIG_NATFEAT
337 for (i = 1; i < m68k_num_memory; i++)
338 free_bootmem_node(NODE_DATA(i), m68k_memory[i].addr,
339 m68k_memory[i].size);
340 #ifdef CONFIG_BLK_DEV_INITRD
341 if (m68k_ramdisk.size) {
342 reserve_bootmem_node(__virt_to_node(phys_to_virt(m68k_ramdisk.addr)),
343 m68k_ramdisk.addr, m68k_ramdisk.size,
345 initrd_start = (unsigned long)phys_to_virt(m68k_ramdisk.addr);
346 initrd_end = initrd_start + m68k_ramdisk.size;
347 printk("initrd: %08lx - %08lx\n", initrd_start, initrd_end);
353 atari_stram_reserve_pages((void *)availmem);
361 #endif /* !CONFIG_SUN3 */
363 /* set ISA defs early as possible */
364 #if defined(CONFIG_ISA) && defined(MULTI_ISA)
366 isa_type = ISA_TYPE_Q40;
369 #ifdef CONFIG_AMIGA_PCMCIA
370 if (MACH_IS_AMIGA && AMIGAHW_PRESENT(PCMCIA)) {
371 isa_type = ISA_TYPE_AG;
378 static int show_cpuinfo(struct seq_file *m, void *v)
380 const char *cpu, *mmu, *fpu;
381 unsigned long clockfreq, clockfactor;
383 #define LOOP_CYCLES_68020 (8)
384 #define LOOP_CYCLES_68030 (8)
385 #define LOOP_CYCLES_68040 (3)
386 #define LOOP_CYCLES_68060 (1)
390 clockfactor = LOOP_CYCLES_68020;
391 } else if (CPU_IS_030) {
393 clockfactor = LOOP_CYCLES_68030;
394 } else if (CPU_IS_040) {
396 clockfactor = LOOP_CYCLES_68040;
397 } else if (CPU_IS_060) {
399 clockfactor = LOOP_CYCLES_68060;
405 #ifdef CONFIG_M68KFPU_EMU_ONLY
406 fpu = "none(soft float)";
408 if (m68k_fputype & FPU_68881)
410 else if (m68k_fputype & FPU_68882)
412 else if (m68k_fputype & FPU_68040)
414 else if (m68k_fputype & FPU_68060)
416 else if (m68k_fputype & FPU_SUNFPA)
422 if (m68k_mmutype & MMU_68851)
424 else if (m68k_mmutype & MMU_68030)
426 else if (m68k_mmutype & MMU_68040)
428 else if (m68k_mmutype & MMU_68060)
430 else if (m68k_mmutype & MMU_SUN3)
432 else if (m68k_mmutype & MMU_APOLLO)
437 clockfreq = loops_per_jiffy * HZ * clockfactor;
439 seq_printf(m, "CPU:\t\t%s\n"
442 "Clocking:\t%lu.%1luMHz\n"
443 "BogoMips:\t%lu.%02lu\n"
444 "Calibration:\t%lu loops\n",
446 clockfreq/1000000,(clockfreq/100000)%10,
447 loops_per_jiffy/(500000/HZ),(loops_per_jiffy/(5000/HZ))%100,
452 static void *c_start(struct seq_file *m, loff_t *pos)
454 return *pos < 1 ? (void *)1 : NULL;
456 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
461 static void c_stop(struct seq_file *m, void *v)
464 const struct seq_operations cpuinfo_op = {
468 .show = show_cpuinfo,
471 #ifdef CONFIG_PROC_HARDWARE
472 static int hardware_proc_show(struct seq_file *m, void *v)
479 mach_get_model(model);
481 strcpy(model, "Unknown m68k");
483 seq_printf(m, "Model:\t\t%s\n", model);
484 for (mem = 0, i = 0; i < m68k_num_memory; i++)
485 mem += m68k_memory[i].size;
486 seq_printf(m, "System Memory:\t%ldK\n", mem >> 10);
488 if (mach_get_hardware_list)
489 mach_get_hardware_list(m);
494 static int hardware_proc_open(struct inode *inode, struct file *file)
496 return single_open(file, hardware_proc_show, NULL);
499 static const struct file_operations hardware_proc_fops = {
500 .open = hardware_proc_open,
503 .release = single_release,
506 static int __init proc_hardware_init(void)
508 proc_create("hardware", 0, NULL, &hardware_proc_fops);
511 module_init(proc_hardware_init);
514 void check_bugs(void)
516 #ifndef CONFIG_M68KFPU_EMU
517 if (m68k_fputype == 0) {
518 printk(KERN_EMERG "*** YOU DO NOT HAVE A FLOATING POINT UNIT, "
519 "WHICH IS REQUIRED BY LINUX/M68K ***\n");
520 printk(KERN_EMERG "Upgrade your hardware or join the FPU "
521 "emulation project\n");
524 #endif /* !CONFIG_M68KFPU_EMU */
528 static int __init adb_probe_sync_enable (char *str) {
529 extern int __adb_probe_sync;
530 __adb_probe_sync = 1;
534 __setup("adb_sync", adb_probe_sync_enable);
535 #endif /* CONFIG_ADB */