arch/m32r/kernel/setup_usrv.c

   1 /*
   2  *  linux/arch/m32r/kernel/setup_usrv.c
   3  *
   4  *  Setup routines for MITSUBISHI uServer
   5  *
   6  *  Copyright (c) 2001, 2002, 2003  Hiroyuki Kondo, Hirokazu Takata,
   7  *                                  Hitoshi Yamamoto
   8  */
   9
  10 #include <linux/config.h>
  11 #include <linux/irq.h>
  12 #include <linux/kernel.h>
  13 #include <linux/init.h>
  14
  15 #include <asm/system.h>
  16 #include <asm/m32r.h>
  17 #include <asm/io.h>
  18
  19 #define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long)))
  20
  21 #if !defined(CONFIG_SMP)
  22 typedef struct {
  23         unsigned long icucr;    /* ICU Control Register */
  24 } icu_data_t;
  25 #endif /* CONFIG_SMP */
  26
  27 icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
  28
  29 static void disable_mappi_irq(unsigned int irq)
  30 {
  31         unsigned long port, data;
  32
  33         port = irq2port(irq);
  34         data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7;
  35         outl(data, port);
  36 }
  37
  38 static void enable_mappi_irq(unsigned int irq)
  39 {
  40         unsigned long port, data;
  41
  42         port = irq2port(irq);
  43         data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6;
  44         outl(data, port);
  45 }
  46
  47 static void mask_and_ack_mappi(unsigned int irq)
  48 {
  49         disable_mappi_irq(irq);
  50 }
  51
  52 static void end_mappi_irq(unsigned int irq)
  53 {
  54         enable_mappi_irq(irq);
  55 }
  56
  57 static unsigned int startup_mappi_irq(unsigned int irq)
  58 {
  59         enable_mappi_irq(irq);
  60         return 0;
  61 }
  62
  63 static void shutdown_mappi_irq(unsigned int irq)
  64 {
  65         unsigned long port;
  66
  67         port = irq2port(irq);
  68         outl(M32R_ICUCR_ILEVEL7, port);
  69 }
  70
  71 static struct hw_interrupt_type mappi_irq_type =
  72 {
  73         .typename = "M32700-IRQ",
  74         .startup = startup_mappi_irq,
  75         .shutdown = shutdown_mappi_irq,
  76         .enable = enable_mappi_irq,
  77         .disable = disable_mappi_irq,
  78         .ack = mask_and_ack_mappi,
  79         .end = end_mappi_irq
  80 };
  81
  82 /*
  83  * Interrupt Control Unit of PLD on M32700UT (Level 2)
  84  */
  85 #define irq2pldirq(x)           ((x) - M32700UT_PLD_IRQ_BASE)
  86 #define pldirq2port(x)          (unsigned long)((int)PLD_ICUCR1 + \
  87                                  (((x) - 1) * sizeof(unsigned short)))
  88
  89 typedef struct {
  90         unsigned short icucr;  /* ICU Control Register */
  91 } pld_icu_data_t;
  92
  93 static pld_icu_data_t pld_icu_data[M32700UT_NUM_PLD_IRQ];
  94
  95 static void disable_m32700ut_pld_irq(unsigned int irq)
  96 {
  97         unsigned long port, data;
  98         unsigned int pldirq;
  99
 100         pldirq = irq2pldirq(irq);
 101         port = pldirq2port(pldirq);
 102         data = pld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7;
 103         outw(data, port);
 104 }
 105
 106 static void enable_m32700ut_pld_irq(unsigned int irq)
 107 {
 108         unsigned long port, data;
 109         unsigned int pldirq;
 110
 111         pldirq = irq2pldirq(irq);
 112         port = pldirq2port(pldirq);
 113         data = pld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6;
 114         outw(data, port);
 115 }
 116
 117 static void mask_and_ack_m32700ut_pld(unsigned int irq)
 118 {
 119         disable_m32700ut_pld_irq(irq);
 120 }
 121
 122 static void end_m32700ut_pld_irq(unsigned int irq)
 123 {
 124         enable_m32700ut_pld_irq(irq);
 125         end_mappi_irq(M32R_IRQ_INT1);
 126 }
 127
 128 static unsigned int startup_m32700ut_pld_irq(unsigned int irq)
 129 {
 130         enable_m32700ut_pld_irq(irq);
 131         return 0;
 132 }
 133
 134 static void shutdown_m32700ut_pld_irq(unsigned int irq)
 135 {
 136         unsigned long port;
 137         unsigned int pldirq;
 138
 139         pldirq = irq2pldirq(irq);
 140         port = pldirq2port(pldirq);
 141         outw(PLD_ICUCR_ILEVEL7, port);
 142 }
 143
 144 static struct hw_interrupt_type m32700ut_pld_irq_type =
 145 {
 146         .typename = "USRV-PLD-IRQ",
 147         .startup = startup_m32700ut_pld_irq,
 148         .shutdown = shutdown_m32700ut_pld_irq,
 149         .enable = enable_m32700ut_pld_irq,
 150         .disable = disable_m32700ut_pld_irq,
 151         .ack = mask_and_ack_m32700ut_pld,
 152         .end = end_m32700ut_pld_irq
 153 };
 154
 155 void __init init_IRQ(void)
 156 {
 157         static int once = 0;
 158         int i;
 159
 160         if (once)
 161                 return;
 162         else
 163                 once++;
 164
 165         /* MFT2 : system timer */
 166         irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED;
 167         irq_desc[M32R_IRQ_MFT2].handler = &mappi_irq_type;
 168         irq_desc[M32R_IRQ_MFT2].action = 0;
 169         irq_desc[M32R_IRQ_MFT2].depth = 1;
 170         icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN;
 171         disable_mappi_irq(M32R_IRQ_MFT2);
 172
 173 #if defined(CONFIG_SERIAL_M32R_SIO)
 174         /* SIO0_R : uart receive data */
 175         irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED;
 176         irq_desc[M32R_IRQ_SIO0_R].handler = &mappi_irq_type;
 177         irq_desc[M32R_IRQ_SIO0_R].action = 0;
 178         irq_desc[M32R_IRQ_SIO0_R].depth = 1;
 179         icu_data[M32R_IRQ_SIO0_R].icucr = 0;
 180         disable_mappi_irq(M32R_IRQ_SIO0_R);
 181
 182         /* SIO0_S : uart send data */
 183         irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED;
 184         irq_desc[M32R_IRQ_SIO0_S].handler = &mappi_irq_type;
 185         irq_desc[M32R_IRQ_SIO0_S].action = 0;
 186         irq_desc[M32R_IRQ_SIO0_S].depth = 1;
 187         icu_data[M32R_IRQ_SIO0_S].icucr = 0;
 188         disable_mappi_irq(M32R_IRQ_SIO0_S);
 189
 190         /* SIO1_R : uart receive data */
 191         irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED;
 192         irq_desc[M32R_IRQ_SIO1_R].handler = &mappi_irq_type;
 193         irq_desc[M32R_IRQ_SIO1_R].action = 0;
 194         irq_desc[M32R_IRQ_SIO1_R].depth = 1;
 195         icu_data[M32R_IRQ_SIO1_R].icucr = 0;
 196         disable_mappi_irq(M32R_IRQ_SIO1_R);
 197
 198         /* SIO1_S : uart send data */
 199         irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED;
 200         irq_desc[M32R_IRQ_SIO1_S].handler = &mappi_irq_type;
 201         irq_desc[M32R_IRQ_SIO1_S].action = 0;
 202         irq_desc[M32R_IRQ_SIO1_S].depth = 1;
 203         icu_data[M32R_IRQ_SIO1_S].icucr = 0;
 204         disable_mappi_irq(M32R_IRQ_SIO1_S);
 205 #endif  /* CONFIG_SERIAL_M32R_SIO */
 206
 207         /* INT#67-#71: CFC#0 IREQ on PLD */
 208         for (i = 0 ; i < CONFIG_CFC_NUM ; i++ ) {
 209                 irq_desc[PLD_IRQ_CF0 + i].status = IRQ_DISABLED;
 210                 irq_desc[PLD_IRQ_CF0 + i].handler = &m32700ut_pld_irq_type;
 211                 irq_desc[PLD_IRQ_CF0 + i].action = 0;
 212                 irq_desc[PLD_IRQ_CF0 + i].depth = 1;    /* disable nested irq */
 213                 pld_icu_data[irq2pldirq(PLD_IRQ_CF0 + i)].icucr
 214                         = PLD_ICUCR_ISMOD01;    /* 'L' level sense */
 215                 disable_m32700ut_pld_irq(PLD_IRQ_CF0 + i);
 216         }
 217
 218 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 219         /* INT#76: 16552D#0 IREQ on PLD */
 220         irq_desc[PLD_IRQ_UART0].status = IRQ_DISABLED;
 221         irq_desc[PLD_IRQ_UART0].handler = &m32700ut_pld_irq_type;
 222         irq_desc[PLD_IRQ_UART0].action = 0;
 223         irq_desc[PLD_IRQ_UART0].depth = 1;      /* disable nested irq */
 224         pld_icu_data[irq2pldirq(PLD_IRQ_UART0)].icucr
 225                 = PLD_ICUCR_ISMOD03;    /* 'H' level sense */
 226         disable_m32700ut_pld_irq(PLD_IRQ_UART0);
 227
 228         /* INT#77: 16552D#1 IREQ on PLD */
 229         irq_desc[PLD_IRQ_UART1].status = IRQ_DISABLED;
 230         irq_desc[PLD_IRQ_UART1].handler = &m32700ut_pld_irq_type;
 231         irq_desc[PLD_IRQ_UART1].action = 0;
 232         irq_desc[PLD_IRQ_UART1].depth = 1;      /* disable nested irq */
 233         pld_icu_data[irq2pldirq(PLD_IRQ_UART1)].icucr
 234                 = PLD_ICUCR_ISMOD03;    /* 'H' level sense */
 235         disable_m32700ut_pld_irq(PLD_IRQ_UART1);
 236 #endif  /* CONFIG_SERIAL_8250 || CONFIG_SERIAL_8250_MODULE */
 237
 238 #if defined(CONFIG_IDC_AK4524) || defined(CONFIG_IDC_AK4524_MODULE)
 239         /* INT#80: AK4524 IREQ on PLD */
 240         irq_desc[PLD_IRQ_SNDINT].status = IRQ_DISABLED;
 241         irq_desc[PLD_IRQ_SNDINT].handler = &m32700ut_pld_irq_type;
 242         irq_desc[PLD_IRQ_SNDINT].action = 0;
 243         irq_desc[PLD_IRQ_SNDINT].depth = 1;     /* disable nested irq */
 244         pld_icu_data[irq2pldirq(PLD_IRQ_SNDINT)].icucr
 245                 = PLD_ICUCR_ISMOD01;    /* 'L' level sense */
 246         disable_m32700ut_pld_irq(PLD_IRQ_SNDINT);
 247 #endif  /* CONFIG_IDC_AK4524 || CONFIG_IDC_AK4524_MODULE */
 248
 249         /*
 250          * INT1# is used for UART, MMC, CF Controller in FPGA.
 251          * We enable it here.
 252          */
 253         icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD11;
 254         enable_mappi_irq(M32R_IRQ_INT1);
 255 }
 256