arch/blackfin/mach-bf537/boards/stamp.c

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *                2005 National ICT Australia (NICTA)
   4  *                      Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Licensed under the GPL-2 or later.
   7  */
   8
   9 #include <linux/device.h>
  10 #include <linux/kernel.h>
  11 #include <linux/platform_device.h>
  12 #include <linux/io.h>
  13 #include <linux/mtd/mtd.h>
  14 #include <linux/mtd/nand.h>
  15 #include <linux/mtd/partitions.h>
  16 #include <linux/mtd/plat-ram.h>
  17 #include <linux/mtd/physmap.h>
  18 #include <linux/spi/spi.h>
  19 #include <linux/spi/flash.h>
  20 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
  21 #include <linux/usb/isp1362.h>
  22 #endif
  23 #include <linux/i2c.h>
  24 #include <linux/i2c/adp5588.h>
  25 #include <linux/etherdevice.h>
  26 #include <linux/ata_platform.h>
  27 #include <linux/irq.h>
  28 #include <linux/interrupt.h>
  29 #include <linux/usb/sl811.h>
  30 #include <linux/spi/mmc_spi.h>
  31 #include <linux/leds.h>
  32 #include <linux/input.h>
  33 #include <asm/dma.h>
  34 #include <asm/bfin5xx_spi.h>
  35 #include <asm/reboot.h>
  36 #include <asm/portmux.h>
  37 #include <asm/dpmc.h>
  38 #include <asm/bfin_sport.h>
  39 #ifdef CONFIG_REGULATOR_FIXED_VOLTAGE
  40 #include <linux/regulator/fixed.h>
  41 #endif
  42 #include <linux/regulator/machine.h>
  43 #include <linux/regulator/consumer.h>
  44 #include <linux/regulator/userspace-consumer.h>
  45
  46 /*
  47  * Name the Board for the /proc/cpuinfo
  48  */
  49 const char bfin_board_name[] = "ADI BF537-STAMP";
  50
  51 /*
  52  *  Driver needs to know address, irq and flag pin.
  53  */
  54
  55 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
  56 #include <linux/usb/isp1760.h>
  57 static struct resource bfin_isp1760_resources[] = {
  58         [0] = {
  59                 .start  = 0x203C0000,
  60                 .end    = 0x203C0000 + 0x000fffff,
  61                 .flags  = IORESOURCE_MEM,
  62         },
  63         [1] = {
  64                 .start  = IRQ_PF7,
  65                 .end    = IRQ_PF7,
  66                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
  67         },
  68 };
  69
  70 static struct isp1760_platform_data isp1760_priv = {
  71         .is_isp1761 = 0,
  72         .bus_width_16 = 1,
  73         .port1_otg = 0,
  74         .analog_oc = 0,
  75         .dack_polarity_high = 0,
  76         .dreq_polarity_high = 0,
  77 };
  78
  79 static struct platform_device bfin_isp1760_device = {
  80         .name           = "isp1760",
  81         .id             = 0,
  82         .dev = {
  83                 .platform_data = &isp1760_priv,
  84         },
  85         .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
  86         .resource       = bfin_isp1760_resources,
  87 };
  88 #endif
  89
  90 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
  91 #include <linux/gpio_keys.h>
  92
  93 static struct gpio_keys_button bfin_gpio_keys_table[] = {
  94         {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"},
  95         {BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"},
  96         {BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"},
  97         {BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"},
  98 };
  99
 100 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
 101         .buttons        = bfin_gpio_keys_table,
 102         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
 103 };
 104
 105 static struct platform_device bfin_device_gpiokeys = {
 106         .name      = "gpio-keys",
 107         .dev = {
 108                 .platform_data = &bfin_gpio_keys_data,
 109         },
 110 };
 111 #endif
 112
 113 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 114 static struct resource bfin_pcmcia_cf_resources[] = {
 115         {
 116                 .start = 0x20310000, /* IO PORT */
 117                 .end = 0x20312000,
 118                 .flags = IORESOURCE_MEM,
 119         }, {
 120                 .start = 0x20311000, /* Attribute Memory */
 121                 .end = 0x20311FFF,
 122                 .flags = IORESOURCE_MEM,
 123         }, {
 124                 .start = IRQ_PF4,
 125                 .end = IRQ_PF4,
 126                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 127         }, {
 128                 .start = 6, /* Card Detect PF6 */
 129                 .end = 6,
 130                 .flags = IORESOURCE_IRQ,
 131         },
 132 };
 133
 134 static struct platform_device bfin_pcmcia_cf_device = {
 135         .name = "bfin_cf_pcmcia",
 136         .id = -1,
 137         .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
 138         .resource = bfin_pcmcia_cf_resources,
 139 };
 140 #endif
 141
 142 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 143 static struct platform_device rtc_device = {
 144         .name = "rtc-bfin",
 145         .id   = -1,
 146 };
 147 #endif
 148
 149 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 150 #include <linux/smc91x.h>
 151
 152 static struct smc91x_platdata smc91x_info = {
 153         .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
 154         .leda = RPC_LED_100_10,
 155         .ledb = RPC_LED_TX_RX,
 156 };
 157
 158 static struct resource smc91x_resources[] = {
 159         {
 160                 .name = "smc91x-regs",
 161                 .start = 0x20300300,
 162                 .end = 0x20300300 + 16,
 163                 .flags = IORESOURCE_MEM,
 164         }, {
 165
 166                 .start = IRQ_PF7,
 167                 .end = IRQ_PF7,
 168                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 169         },
 170 };
 171 static struct platform_device smc91x_device = {
 172         .name = "smc91x",
 173         .id = 0,
 174         .num_resources = ARRAY_SIZE(smc91x_resources),
 175         .resource = smc91x_resources,
 176         .dev    = {
 177                 .platform_data  = &smc91x_info,
 178         },
 179 };
 180 #endif
 181
 182 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 183 static struct resource dm9000_resources[] = {
 184         [0] = {
 185                 .start  = 0x203FB800,
 186                 .end    = 0x203FB800 + 1,
 187                 .flags  = IORESOURCE_MEM,
 188         },
 189         [1] = {
 190                 .start  = 0x203FB804,
 191                 .end    = 0x203FB804 + 1,
 192                 .flags  = IORESOURCE_MEM,
 193         },
 194         [2] = {
 195                 .start  = IRQ_PF9,
 196                 .end    = IRQ_PF9,
 197                 .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
 198         },
 199 };
 200
 201 static struct platform_device dm9000_device = {
 202         .name           = "dm9000",
 203         .id             = -1,
 204         .num_resources  = ARRAY_SIZE(dm9000_resources),
 205         .resource       = dm9000_resources,
 206 };
 207 #endif
 208
 209 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
 210 static struct resource sl811_hcd_resources[] = {
 211         {
 212                 .start = 0x20340000,
 213                 .end = 0x20340000,
 214                 .flags = IORESOURCE_MEM,
 215         }, {
 216                 .start = 0x20340004,
 217                 .end = 0x20340004,
 218                 .flags = IORESOURCE_MEM,
 219         }, {
 220                 .start = IRQ_PF4,
 221                 .end = IRQ_PF4,
 222                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 223         },
 224 };
 225
 226 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
 227 void sl811_port_power(struct device *dev, int is_on)
 228 {
 229         gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
 230         gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
 231 }
 232 #endif
 233
 234 static struct sl811_platform_data sl811_priv = {
 235         .potpg = 10,
 236         .power = 250,       /* == 500mA */
 237 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
 238         .port_power = &sl811_port_power,
 239 #endif
 240 };
 241
 242 static struct platform_device sl811_hcd_device = {
 243         .name = "sl811-hcd",
 244         .id = 0,
 245         .dev = {
 246                 .platform_data = &sl811_priv,
 247         },
 248         .num_resources = ARRAY_SIZE(sl811_hcd_resources),
 249         .resource = sl811_hcd_resources,
 250 };
 251 #endif
 252
 253 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 254 static struct resource isp1362_hcd_resources[] = {
 255         {
 256                 .start = 0x20360000,
 257                 .end = 0x20360000,
 258                 .flags = IORESOURCE_MEM,
 259         }, {
 260                 .start = 0x20360004,
 261                 .end = 0x20360004,
 262                 .flags = IORESOURCE_MEM,
 263         }, {
 264                 .start = IRQ_PF3,
 265                 .end = IRQ_PF3,
 266                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 267         },
 268 };
 269
 270 static struct isp1362_platform_data isp1362_priv = {
 271         .sel15Kres = 1,
 272         .clknotstop = 0,
 273         .oc_enable = 0,
 274         .int_act_high = 0,
 275         .int_edge_triggered = 0,
 276         .remote_wakeup_connected = 0,
 277         .no_power_switching = 1,
 278         .power_switching_mode = 0,
 279 };
 280
 281 static struct platform_device isp1362_hcd_device = {
 282         .name = "isp1362-hcd",
 283         .id = 0,
 284         .dev = {
 285                 .platform_data = &isp1362_priv,
 286         },
 287         .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
 288         .resource = isp1362_hcd_resources,
 289 };
 290 #endif
 291
 292 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
 293 static unsigned short bfin_can_peripherals[] = {
 294         P_CAN0_RX, P_CAN0_TX, 0
 295 };
 296
 297 static struct resource bfin_can_resources[] = {
 298         {
 299                 .start = 0xFFC02A00,
 300                 .end = 0xFFC02FFF,
 301                 .flags = IORESOURCE_MEM,
 302         },
 303         {
 304                 .start = IRQ_CAN_RX,
 305                 .end = IRQ_CAN_RX,
 306                 .flags = IORESOURCE_IRQ,
 307         },
 308         {
 309                 .start = IRQ_CAN_TX,
 310                 .end = IRQ_CAN_TX,
 311                 .flags = IORESOURCE_IRQ,
 312         },
 313         {
 314                 .start = IRQ_CAN_ERROR,
 315                 .end = IRQ_CAN_ERROR,
 316                 .flags = IORESOURCE_IRQ,
 317         },
 318 };
 319
 320 static struct platform_device bfin_can_device = {
 321         .name = "bfin_can",
 322         .num_resources = ARRAY_SIZE(bfin_can_resources),
 323         .resource = bfin_can_resources,
 324         .dev = {
 325                 .platform_data = &bfin_can_peripherals, /* Passed to driver */
 326         },
 327 };
 328 #endif
 329
 330 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 331 #include <linux/bfin_mac.h>
 332 static const unsigned short bfin_mac_peripherals[] = P_MII0;
 333
 334 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
 335         {
 336                 .addr = 1,
 337                 .irq = PHY_POLL, /* IRQ_MAC_PHYINT */
 338         },
 339 };
 340
 341 static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
 342         .phydev_number = 1,
 343         .phydev_data = bfin_phydev_data,
 344         .phy_mode = PHY_INTERFACE_MODE_MII,
 345         .mac_peripherals = bfin_mac_peripherals,
 346 };
 347
 348 static struct platform_device bfin_mii_bus = {
 349         .name = "bfin_mii_bus",
 350         .dev = {
 351                 .platform_data = &bfin_mii_bus_data,
 352         }
 353 };
 354
 355 static struct platform_device bfin_mac_device = {
 356         .name = "bfin_mac",
 357         .dev = {
 358                 .platform_data = &bfin_mii_bus,
 359         }
 360 };
 361 #endif
 362
 363 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 364 static struct resource net2272_bfin_resources[] = {
 365         {
 366                 .start = 0x20300000,
 367                 .end = 0x20300000 + 0x100,
 368                 .flags = IORESOURCE_MEM,
 369         }, {
 370                 .start = 1,
 371                 .flags = IORESOURCE_BUS,
 372         }, {
 373                 .start = IRQ_PF7,
 374                 .end = IRQ_PF7,
 375                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 376         },
 377 };
 378
 379 static struct platform_device net2272_bfin_device = {
 380         .name = "net2272",
 381         .id = -1,
 382         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
 383         .resource = net2272_bfin_resources,
 384 };
 385 #endif
 386
 387 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 388 const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
 389
 390 static struct mtd_partition bfin_plat_nand_partitions[] = {
 391         {
 392                 .name   = "linux kernel(nand)",
 393                 .size   = 0x400000,
 394                 .offset = 0,
 395         }, {
 396                 .name   = "file system(nand)",
 397                 .size   = MTDPART_SIZ_FULL,
 398                 .offset = MTDPART_OFS_APPEND,
 399         },
 400 };
 401
 402 #define BFIN_NAND_PLAT_CLE 2
 403 #define BFIN_NAND_PLAT_ALE 1
 404 static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 405 {
 406         struct nand_chip *this = mtd->priv;
 407
 408         if (cmd == NAND_CMD_NONE)
 409                 return;
 410
 411         if (ctrl & NAND_CLE)
 412                 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
 413         else
 414                 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
 415 }
 416
 417 #define BFIN_NAND_PLAT_READY GPIO_PF3
 418 static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
 419 {
 420         return gpio_get_value(BFIN_NAND_PLAT_READY);
 421 }
 422
 423 static struct platform_nand_data bfin_plat_nand_data = {
 424         .chip = {
 425                 .nr_chips = 1,
 426                 .chip_delay = 30,
 427                 .part_probe_types = part_probes,
 428                 .partitions = bfin_plat_nand_partitions,
 429                 .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
 430         },
 431         .ctrl = {
 432                 .cmd_ctrl  = bfin_plat_nand_cmd_ctrl,
 433                 .dev_ready = bfin_plat_nand_dev_ready,
 434         },
 435 };
 436
 437 #define MAX(x, y) (x > y ? x : y)
 438 static struct resource bfin_plat_nand_resources = {
 439         .start = 0x20212000,
 440         .end   = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
 441         .flags = IORESOURCE_MEM,
 442 };
 443
 444 static struct platform_device bfin_async_nand_device = {
 445         .name = "gen_nand",
 446         .id = -1,
 447         .num_resources = 1,
 448         .resource = &bfin_plat_nand_resources,
 449         .dev = {
 450                 .platform_data = &bfin_plat_nand_data,
 451         },
 452 };
 453
 454 static void bfin_plat_nand_init(void)
 455 {
 456         gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
 457 }
 458 #else
 459 static void bfin_plat_nand_init(void) {}
 460 #endif
 461
 462 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 463 static struct mtd_partition stamp_partitions[] = {
 464         {
 465                 .name       = "bootloader(nor)",
 466                 .size       = 0x40000,
 467                 .offset     = 0,
 468         }, {
 469                 .name       = "linux kernel(nor)",
 470                 .size       = 0x180000,
 471                 .offset     = MTDPART_OFS_APPEND,
 472         }, {
 473                 .name       = "file system(nor)",
 474                 .size       = 0x400000 - 0x40000 - 0x180000 - 0x10000,
 475                 .offset     = MTDPART_OFS_APPEND,
 476         }, {
 477                 .name       = "MAC Address(nor)",
 478                 .size       = MTDPART_SIZ_FULL,
 479                 .offset     = 0x3F0000,
 480                 .mask_flags = MTD_WRITEABLE,
 481         }
 482 };
 483
 484 static struct physmap_flash_data stamp_flash_data = {
 485         .width      = 2,
 486         .parts      = stamp_partitions,
 487         .nr_parts   = ARRAY_SIZE(stamp_partitions),
 488 #ifdef CONFIG_ROMKERNEL
 489         .probe_type = "map_rom",
 490 #endif
 491 };
 492
 493 static struct resource stamp_flash_resource = {
 494         .start = 0x20000000,
 495         .end   = 0x203fffff,
 496         .flags = IORESOURCE_MEM,
 497 };
 498
 499 static struct platform_device stamp_flash_device = {
 500         .name          = "physmap-flash",
 501         .id            = 0,
 502         .dev = {
 503                 .platform_data = &stamp_flash_data,
 504         },
 505         .num_resources = 1,
 506         .resource      = &stamp_flash_resource,
 507 };
 508 #endif
 509
 510 #if defined(CONFIG_MTD_M25P80) \
 511         || defined(CONFIG_MTD_M25P80_MODULE)
 512 static struct mtd_partition bfin_spi_flash_partitions[] = {
 513         {
 514                 .name = "bootloader(spi)",
 515                 .size = 0x00040000,
 516                 .offset = 0,
 517                 .mask_flags = MTD_CAP_ROM
 518         }, {
 519                 .name = "linux kernel(spi)",
 520                 .size = 0x180000,
 521                 .offset = MTDPART_OFS_APPEND,
 522         }, {
 523                 .name = "file system(spi)",
 524                 .size = MTDPART_SIZ_FULL,
 525                 .offset = MTDPART_OFS_APPEND,
 526         }
 527 };
 528
 529 static struct flash_platform_data bfin_spi_flash_data = {
 530         .name = "m25p80",
 531         .parts = bfin_spi_flash_partitions,
 532         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 533         /* .type = "m25p64", */
 534 };
 535
 536 /* SPI flash chip (m25p64) */
 537 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 538         .enable_dma = 0,         /* use dma transfer with this chip*/
 539 };
 540 #endif
 541
 542 #if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
 543 #include <linux/input/ad714x.h>
 544
 545 static struct ad714x_slider_plat ad7147_spi_slider_plat[] = {
 546         {
 547                 .start_stage = 0,
 548                 .end_stage = 7,
 549                 .max_coord = 128,
 550         },
 551 };
 552
 553 static struct ad714x_button_plat ad7147_spi_button_plat[] = {
 554         {
 555                 .keycode = BTN_FORWARD,
 556                 .l_mask = 0,
 557                 .h_mask = 0x600,
 558         },
 559         {
 560                 .keycode = BTN_LEFT,
 561                 .l_mask = 0,
 562                 .h_mask = 0x500,
 563         },
 564         {
 565                 .keycode = BTN_MIDDLE,
 566                 .l_mask = 0,
 567                 .h_mask = 0x800,
 568         },
 569         {
 570                 .keycode = BTN_RIGHT,
 571                 .l_mask = 0x100,
 572                 .h_mask = 0x400,
 573         },
 574         {
 575                 .keycode = BTN_BACK,
 576                 .l_mask = 0x200,
 577                 .h_mask = 0x400,
 578         },
 579 };
 580 static struct ad714x_platform_data ad7147_spi_platform_data = {
 581         .slider_num = 1,
 582         .button_num = 5,
 583         .slider = ad7147_spi_slider_plat,
 584         .button = ad7147_spi_button_plat,
 585         .stage_cfg_reg =  {
 586                 {0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600},
 587                 {0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650},
 588                 {0xFFFF, 0x1FFE, 0, 0x2626, 1650, 1650, 1650, 1650},
 589                 {0xFFFF, 0x1FFB, 0, 0x2626, 1650, 1650, 1650, 1650},
 590                 {0xFFFF, 0x1FEF, 0, 0x2626, 1650, 1650, 1650, 1650},
 591                 {0xFFFF, 0x1FBF, 0, 0x2626, 1650, 1650, 1650, 1650},
 592                 {0xFFFF, 0x1EFF, 0, 0x2626, 1650, 1650, 1650, 1650},
 593                 {0xFFFF, 0x1BFF, 0, 0x2626, 1600, 1600, 1600, 1600},
 594                 {0xFF7B, 0x3FFF, 0x506,  0x2626, 1100, 1100, 1150, 1150},
 595                 {0xFDFE, 0x3FFF, 0x606,  0x2626, 1100, 1100, 1150, 1150},
 596                 {0xFEBA, 0x1FFF, 0x1400, 0x2626, 1200, 1200, 1300, 1300},
 597                 {0xFFEF, 0x1FFF, 0x0,    0x2626, 1100, 1100, 1150, 1150},
 598         },
 599         .sys_cfg_reg = {0x2B2, 0x0, 0x3233, 0x819, 0x832, 0xCFF, 0xCFF, 0x0},
 600 };
 601 #endif
 602
 603 #if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
 604 #include <linux/input/ad714x.h>
 605 static struct ad714x_button_plat ad7142_i2c_button_plat[] = {
 606         {
 607                 .keycode = BTN_1,
 608                 .l_mask = 0,
 609                 .h_mask = 0x1,
 610         },
 611         {
 612                 .keycode = BTN_2,
 613                 .l_mask = 0,
 614                 .h_mask = 0x2,
 615         },
 616         {
 617                 .keycode = BTN_3,
 618                 .l_mask = 0,
 619                 .h_mask = 0x4,
 620         },
 621         {
 622                 .keycode = BTN_4,
 623                 .l_mask = 0x0,
 624                 .h_mask = 0x8,
 625         },
 626 };
 627 static struct ad714x_platform_data ad7142_i2c_platform_data = {
 628         .button_num = 4,
 629         .button = ad7142_i2c_button_plat,
 630         .stage_cfg_reg =  {
 631                 /* fixme: figure out right setting for all comoponent according
 632                  * to hardware feature of EVAL-AD7142EB board */
 633                 {0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
 634                 {0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
 635                 {0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
 636                 {0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
 637                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 638                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 639                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 640                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 641                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 642                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 643                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 644                 {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
 645         },
 646         .sys_cfg_reg = {0x0B2, 0x0, 0x690, 0x664, 0x290F, 0xF, 0xF, 0x0},
 647 };
 648 #endif
 649
 650 #if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
 651 static struct bfin5xx_spi_chip ad2s90_spi_chip_info = {
 652         .enable_dma = 0,
 653 };
 654 #endif
 655
 656 #if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
 657 static unsigned short ad2s120x_platform_data[] = {
 658         /* used as SAMPLE and RDVEL */
 659         GPIO_PF5, GPIO_PF6, 0
 660 };
 661
 662 static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = {
 663         .enable_dma = 0,
 664 };
 665 #endif
 666
 667 #if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
 668 static unsigned short ad2s1210_platform_data[] = {
 669         /* use as SAMPLE, A0, A1 */
 670         GPIO_PF7, GPIO_PF8, GPIO_PF9,
 671 # if defined(CONFIG_AD2S1210_GPIO_INPUT) || defined(CONFIG_AD2S1210_GPIO_OUTPUT)
 672         /* the RES0 and RES1 pins */
 673         GPIO_PF4, GPIO_PF5,
 674 # endif
 675         0,
 676 };
 677
 678 static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = {
 679         .enable_dma = 0,
 680 };
 681 #endif
 682
 683 #if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
 684 static struct bfin5xx_spi_chip ad7314_spi_chip_info = {
 685         .enable_dma = 0,
 686 };
 687 #endif
 688
 689 #if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
 690 static unsigned short ad7816_platform_data[] = {
 691         GPIO_PF4, /* rdwr_pin */
 692         GPIO_PF5, /* convert_pin */
 693         GPIO_PF7, /* busy_pin */
 694         0,
 695 };
 696
 697 static struct bfin5xx_spi_chip ad7816_spi_chip_info = {
 698         .enable_dma = 0,
 699 };
 700 #endif
 701
 702 #if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
 703 static unsigned long adt7310_platform_data[3] = {
 704 /* INT bound temperature alarm event. line 1 */
 705         IRQ_PG4, IRQF_TRIGGER_LOW,
 706 /* CT bound temperature alarm event irq_flags. line 0 */
 707         IRQF_TRIGGER_LOW,
 708 };
 709
 710 static struct bfin5xx_spi_chip adt7310_spi_chip_info = {
 711         .enable_dma = 0,
 712 };
 713 #endif
 714
 715 #if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
 716 static unsigned short ad7298_platform_data[] = {
 717         GPIO_PF7, /* busy_pin */
 718         0,
 719 };
 720 #endif
 721
 722 #if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
 723 static unsigned long adt7316_spi_data[2] = {
 724         IRQF_TRIGGER_LOW, /* interrupt flags */
 725         GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
 726 };
 727
 728 static struct bfin5xx_spi_chip adt7316_spi_chip_info = {
 729         .enable_dma = 0,
 730 };
 731 #endif
 732
 733 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 734 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
 735
 736 static int bfin_mmc_spi_init(struct device *dev,
 737         irqreturn_t (*detect_int)(int, void *), void *data)
 738 {
 739         return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
 740                 IRQF_TRIGGER_FALLING, "mmc-spi-detect", data);
 741 }
 742
 743 static void bfin_mmc_spi_exit(struct device *dev, void *data)
 744 {
 745         free_irq(MMC_SPI_CARD_DETECT_INT, data);
 746 }
 747
 748 static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
 749         .init = bfin_mmc_spi_init,
 750         .exit = bfin_mmc_spi_exit,
 751         .detect_delay = 100, /* msecs */
 752 };
 753
 754 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 755         .enable_dma = 0,
 756         .pio_interrupt = 0,
 757 };
 758 #endif
 759
 760 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 761 #include <linux/spi/ad7877.h>
 762 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 763         .model                  = 7877,
 764         .vref_delay_usecs       = 50,   /* internal, no capacitor */
 765         .x_plate_ohms           = 419,
 766         .y_plate_ohms           = 486,
 767         .pressure_max           = 1000,
 768         .pressure_min           = 0,
 769         .stopacq_polarity       = 1,
 770         .first_conversion_delay = 3,
 771         .acquisition_time       = 1,
 772         .averaging              = 1,
 773         .pen_down_acc_interval  = 1,
 774 };
 775 #endif
 776
 777 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
 778 #include <linux/spi/ad7879.h>
 779 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 780         .model                  = 7879, /* Model = AD7879 */
 781         .x_plate_ohms           = 620,  /* 620 Ohm from the touch datasheet */
 782         .pressure_max           = 10000,
 783         .pressure_min           = 0,
 784         .first_conversion_delay = 3,    /* wait 512us before do a first conversion */
 785         .acquisition_time       = 1,    /* 4us acquisition time per sample */
 786         .median                 = 2,    /* do 8 measurements */
 787         .averaging              = 1,    /* take the average of 4 middle samples */
 788         .pen_down_acc_interval  = 255,  /* 9.4 ms */
 789         .gpio_export            = 1,    /* Export GPIO to gpiolib */
 790         .gpio_base              = -1,   /* Dynamic allocation */
 791 };
 792 #endif
 793
 794 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
 795 #include <linux/input/adxl34x.h>
 796 static const struct adxl34x_platform_data adxl34x_info = {
 797         .x_axis_offset = 0,
 798         .y_axis_offset = 0,
 799         .z_axis_offset = 0,
 800         .tap_threshold = 0x31,
 801         .tap_duration = 0x10,
 802         .tap_latency = 0x60,
 803         .tap_window = 0xF0,
 804         .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
 805         .act_axis_control = 0xFF,
 806         .activity_threshold = 5,
 807         .inactivity_threshold = 3,
 808         .inactivity_time = 4,
 809         .free_fall_threshold = 0x7,
 810         .free_fall_time = 0x20,
 811         .data_rate = 0x8,
 812         .data_range = ADXL_FULL_RES,
 813
 814         .ev_type = EV_ABS,
 815         .ev_code_x = ABS_X,             /* EV_REL */
 816         .ev_code_y = ABS_Y,             /* EV_REL */
 817         .ev_code_z = ABS_Z,             /* EV_REL */
 818
 819         .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */
 820
 821 /*      .ev_code_ff = KEY_F,*/          /* EV_KEY */
 822 /*      .ev_code_act_inactivity = KEY_A,*/      /* EV_KEY */
 823         .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
 824         .fifo_mode = ADXL_FIFO_STREAM,
 825         .orientation_enable = ADXL_EN_ORIENTATION_3D,
 826         .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
 827         .divisor_length =  ADXL_LP_FILTER_DIVISOR_16,
 828         /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
 829         .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
 830 };
 831 #endif
 832
 833 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
 834 static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
 835         .enable_dma     = 1,
 836 };
 837 #endif
 838
 839 #if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
 840 #include <linux/spi/adf702x.h>
 841 #define TXREG 0x0160A470
 842 static const u32 adf7021_regs[] = {
 843         0x09608FA0,
 844         0x00575011,
 845         0x00A7F092,
 846         0x2B141563,
 847         0x81F29E94,
 848         0x00003155,
 849         0x050A4F66,
 850         0x00000007,
 851         0x00000008,
 852         0x000231E9,
 853         0x3296354A,
 854         0x891A2B3B,
 855         0x00000D9C,
 856         0x0000000D,
 857         0x0000000E,
 858         0x0000000F,
 859 };
 860
 861 static struct adf702x_platform_data adf7021_platform_data = {
 862         .regs_base = (void *)SPORT1_TCR1,
 863         .dma_ch_rx = CH_SPORT1_RX,
 864         .dma_ch_tx = CH_SPORT1_TX,
 865         .irq_sport_err = IRQ_SPORT1_ERROR,
 866         .gpio_int_rfs = GPIO_PF8,
 867         .pin_req = {P_SPORT1_DTPRI, P_SPORT1_RFS, P_SPORT1_DRPRI,
 868                         P_SPORT1_RSCLK, P_SPORT1_TSCLK, 0},
 869         .adf702x_model = MODEL_ADF7021,
 870         .adf702x_regs = adf7021_regs,
 871         .tx_reg = TXREG,
 872 };
 873 static inline void adf702x_mac_init(void)
 874 {
 875         random_ether_addr(adf7021_platform_data.mac_addr);
 876 }
 877 #else
 878 static inline void adf702x_mac_init(void) {}
 879 #endif
 880
 881 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 882 #include <linux/spi/ads7846.h>
 883 static int ads7873_get_pendown_state(void)
 884 {
 885         return gpio_get_value(GPIO_PF6);
 886 }
 887
 888 static struct ads7846_platform_data __initdata ad7873_pdata = {
 889         .model          = 7873,         /* AD7873 */
 890         .x_max          = 0xfff,
 891         .y_max          = 0xfff,
 892         .x_plate_ohms   = 620,
 893         .debounce_max   = 1,
 894         .debounce_rep   = 0,
 895         .debounce_tol   = (~0),
 896         .get_pendown_state = ads7873_get_pendown_state,
 897 };
 898 #endif
 899
 900 #if defined(CONFIG_MTD_DATAFLASH) \
 901         || defined(CONFIG_MTD_DATAFLASH_MODULE)
 902
 903 static struct mtd_partition bfin_spi_dataflash_partitions[] = {
 904         {
 905                 .name = "bootloader(spi)",
 906                 .size = 0x00040000,
 907                 .offset = 0,
 908                 .mask_flags = MTD_CAP_ROM
 909         }, {
 910                 .name = "linux kernel(spi)",
 911                 .size = 0x180000,
 912                 .offset = MTDPART_OFS_APPEND,
 913         }, {
 914                 .name = "file system(spi)",
 915                 .size = MTDPART_SIZ_FULL,
 916                 .offset = MTDPART_OFS_APPEND,
 917         }
 918 };
 919
 920 static struct flash_platform_data bfin_spi_dataflash_data = {
 921         .name = "SPI Dataflash",
 922         .parts = bfin_spi_dataflash_partitions,
 923         .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
 924 };
 925
 926 /* DataFlash chip */
 927 static struct bfin5xx_spi_chip data_flash_chip_info = {
 928         .enable_dma = 0,         /* use dma transfer with this chip*/
 929 };
 930 #endif
 931
 932 #if defined(CONFIG_AD7476) || defined(CONFIG_AD7476_MODULE)
 933 static struct bfin5xx_spi_chip spi_ad7476_chip_info = {
 934         .enable_dma = 0,         /* use dma transfer with this chip*/
 935 };
 936 #endif
 937
 938 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 939 #if defined(CONFIG_MTD_M25P80) \
 940         || defined(CONFIG_MTD_M25P80_MODULE)
 941         {
 942                 /* the modalias must be the same as spi device driver name */
 943                 .modalias = "m25p80", /* Name of spi_driver for this device */
 944                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 945                 .bus_num = 0, /* Framework bus number */
 946                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 947                 .platform_data = &bfin_spi_flash_data,
 948                 .controller_data = &spi_flash_chip_info,
 949                 .mode = SPI_MODE_3,
 950         },
 951 #endif
 952 #if defined(CONFIG_MTD_DATAFLASH) \
 953         || defined(CONFIG_MTD_DATAFLASH_MODULE)
 954         {       /* DataFlash chip */
 955                 .modalias = "mtd_dataflash",
 956                 .max_speed_hz = 33250000,     /* max spi clock (SCK) speed in HZ */
 957                 .bus_num = 0, /* Framework bus number */
 958                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 959                 .platform_data = &bfin_spi_dataflash_data,
 960                 .controller_data = &data_flash_chip_info,
 961                 .mode = SPI_MODE_3,
 962         },
 963 #endif
 964
 965 #if defined(CONFIG_SND_BF5XX_SOC_AD1836) \
 966         || defined(CONFIG_SND_BF5XX_SOC_AD1836_MODULE)
 967         {
 968                 .modalias = "ad1836",
 969                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 970                 .bus_num = 0,
 971                 .chip_select = 4,
 972                 .platform_data = "ad1836", /* only includes chip name for the moment */
 973                 .mode = SPI_MODE_3,
 974         },
 975 #endif
 976
 977 #if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
 978         {
 979                 .modalias = "ad193x",
 980                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 981                 .bus_num = 0,
 982                 .chip_select = 5,
 983                 .mode = SPI_MODE_3,
 984         },
 985 #endif
 986
 987 #if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADV80X_MODULE)
 988         {
 989                 .modalias = "adav801",
 990                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 991                 .bus_num = 0,
 992                 .chip_select = 1,
 993                 .mode = SPI_MODE_3,
 994         },
 995 #endif
 996
 997 #if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
 998         {
 999                 .modalias = "ad714x_captouch",
1000                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1001                 .irq = IRQ_PF4,
1002                 .bus_num = 0,
1003                 .chip_select = 5,
1004                 .mode = SPI_MODE_3,
1005                 .platform_data = &ad7147_spi_platform_data,
1006         },
1007 #endif
1008
1009 #if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
1010         {
1011                 .modalias = "ad2s90",
1012                 .bus_num = 0,
1013                 .chip_select = 3,            /* change it for your board */
1014                 .mode = SPI_MODE_3,
1015                 .platform_data = NULL,
1016                 .controller_data = &ad2s90_spi_chip_info,
1017         },
1018 #endif
1019
1020 #if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
1021         {
1022                 .modalias = "ad2s120x",
1023                 .bus_num = 0,
1024                 .chip_select = 4,            /* CS, change it for your board */
1025                 .platform_data = ad2s120x_platform_data,
1026                 .controller_data = &ad2s120x_spi_chip_info,
1027         },
1028 #endif
1029
1030 #if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
1031         {
1032                 .modalias = "ad2s1210",
1033                 .max_speed_hz = 8192000,
1034                 .bus_num = 0,
1035                 .chip_select = 4,            /* CS, change it for your board */
1036                 .platform_data = ad2s1210_platform_data,
1037                 .controller_data = &ad2s1210_spi_chip_info,
1038         },
1039 #endif
1040
1041 #if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
1042         {
1043                 .modalias = "ad7314",
1044                 .max_speed_hz = 1000000,
1045                 .bus_num = 0,
1046                 .chip_select = 4,            /* CS, change it for your board */
1047                 .controller_data = &ad7314_spi_chip_info,
1048                 .mode = SPI_MODE_1,
1049         },
1050 #endif
1051
1052 #if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
1053         {
1054                 .modalias = "ad7818",
1055                 .max_speed_hz = 1000000,
1056                 .bus_num = 0,
1057                 .chip_select = 4,            /* CS, change it for your board */
1058                 .platform_data = ad7816_platform_data,
1059                 .controller_data = &ad7816_spi_chip_info,
1060                 .mode = SPI_MODE_3,
1061         },
1062 #endif
1063
1064 #if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
1065         {
1066                 .modalias = "adt7310",
1067                 .max_speed_hz = 1000000,
1068                 .irq = IRQ_PG5,         /* CT alarm event. Line 0 */
1069                 .bus_num = 0,
1070                 .chip_select = 4,       /* CS, change it for your board */
1071                 .platform_data = adt7310_platform_data,
1072                 .controller_data = &adt7310_spi_chip_info,
1073                 .mode = SPI_MODE_3,
1074         },
1075 #endif
1076
1077 #if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
1078         {
1079                 .modalias = "ad7298",
1080                 .max_speed_hz = 1000000,
1081                 .bus_num = 0,
1082                 .chip_select = 4,            /* CS, change it for your board */
1083                 .platform_data = ad7298_platform_data,
1084                 .mode = SPI_MODE_3,
1085         },
1086 #endif
1087
1088 #if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
1089         {
1090                 .modalias = "adt7316",
1091                 .max_speed_hz = 1000000,
1092                 .irq = IRQ_PG5,         /* interrupt line */
1093                 .bus_num = 0,
1094                 .chip_select = 4,       /* CS, change it for your board */
1095                 .platform_data = adt7316_spi_data,
1096                 .controller_data = &adt7316_spi_chip_info,
1097                 .mode = SPI_MODE_3,
1098         },
1099 #endif
1100
1101 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
1102         {
1103                 .modalias = "mmc_spi",
1104                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
1105                 .bus_num = 0,
1106                 .chip_select = 4,
1107                 .platform_data = &bfin_mmc_spi_pdata,
1108                 .controller_data = &mmc_spi_chip_info,
1109                 .mode = SPI_MODE_3,
1110         },
1111 #endif
1112 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
1113         {
1114                 .modalias               = "ad7877",
1115                 .platform_data          = &bfin_ad7877_ts_info,
1116                 .irq                    = IRQ_PF6,
1117                 .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
1118                 .bus_num        = 0,
1119                 .chip_select  = 1,
1120         },
1121 #endif
1122 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
1123         {
1124                 .modalias = "ad7879",
1125                 .platform_data = &bfin_ad7879_ts_info,
1126                 .irq = IRQ_PF7,
1127                 .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
1128                 .bus_num = 0,
1129                 .chip_select = 1,
1130                 .mode = SPI_CPHA | SPI_CPOL,
1131         },
1132 #endif
1133 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
1134         {
1135                 .modalias = "spidev",
1136                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
1137                 .bus_num = 0,
1138                 .chip_select = 1,
1139         },
1140 #endif
1141 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1142         {
1143                 .modalias = "bfin-lq035q1-spi",
1144                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
1145                 .bus_num = 0,
1146                 .chip_select = 2,
1147                 .mode = SPI_CPHA | SPI_CPOL,
1148         },
1149 #endif
1150 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
1151         {
1152                 .modalias = "enc28j60",
1153                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
1154                 .irq = IRQ_PF6,
1155                 .bus_num = 0,
1156                 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1157                 .controller_data = &enc28j60_spi_chip_info,
1158                 .mode = SPI_MODE_0,
1159         },
1160 #endif
1161 #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
1162         {
1163                 .modalias       = "adxl34x",
1164                 .platform_data  = &adxl34x_info,
1165                 .irq            = IRQ_PF6,
1166                 .max_speed_hz   = 5000000,    /* max spi clock (SCK) speed in HZ */
1167                 .bus_num        = 0,
1168                 .chip_select    = 2,
1169                 .mode = SPI_MODE_3,
1170         },
1171 #endif
1172 #if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
1173         {
1174                 .modalias = "adf702x",
1175                 .max_speed_hz = 16000000,     /* max spi clock (SCK) speed in HZ */
1176                 .bus_num = 0,
1177                 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1178                 .platform_data = &adf7021_platform_data,
1179                 .mode = SPI_MODE_0,
1180         },
1181 #endif
1182 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
1183         {
1184                 .modalias = "ads7846",
1185                 .max_speed_hz = 2000000,     /* max spi clock (SCK) speed in HZ */
1186                 .bus_num = 0,
1187                 .irq = IRQ_PF6,
1188                 .chip_select = GPIO_PF10 + MAX_CTRL_CS, /* GPIO controlled SSEL */
1189                 .platform_data = &ad7873_pdata,
1190                 .mode = SPI_MODE_0,
1191         },
1192 #endif
1193 #if defined(CONFIG_AD7476) \
1194         || defined(CONFIG_AD7476_MODULE)
1195         {
1196                 .modalias = "ad7476", /* Name of spi_driver for this device */
1197                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
1198                 .bus_num = 0, /* Framework bus number */
1199                 .chip_select = 1, /* Framework chip select. */
1200                 .platform_data = NULL, /* No spi_driver specific config */
1201                 .controller_data = &spi_ad7476_chip_info,
1202                 .mode = SPI_MODE_3,
1203         },
1204 #endif
1205 #if defined(CONFIG_ADE7753) \
1206         || defined(CONFIG_ADE7753_MODULE)
1207         {
1208                 .modalias = "ade7753",
1209                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1210                 .bus_num = 0,
1211                 .chip_select = 1, /* CS, change it for your board */
1212                 .platform_data = NULL, /* No spi_driver specific config */
1213                 .mode = SPI_MODE_1,
1214         },
1215 #endif
1216 #if defined(CONFIG_ADE7754) \
1217         || defined(CONFIG_ADE7754_MODULE)
1218         {
1219                 .modalias = "ade7754",
1220                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1221                 .bus_num = 0,
1222                 .chip_select = 1, /* CS, change it for your board */
1223                 .platform_data = NULL, /* No spi_driver specific config */
1224                 .mode = SPI_MODE_1,
1225         },
1226 #endif
1227 #if defined(CONFIG_ADE7758) \
1228         || defined(CONFIG_ADE7758_MODULE)
1229         {
1230                 .modalias = "ade7758",
1231                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1232                 .bus_num = 0,
1233                 .chip_select = 1, /* CS, change it for your board */
1234                 .platform_data = NULL, /* No spi_driver specific config */
1235                 .mode = SPI_MODE_1,
1236         },
1237 #endif
1238 #if defined(CONFIG_ADE7759) \
1239         || defined(CONFIG_ADE7759_MODULE)
1240         {
1241                 .modalias = "ade7759",
1242                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1243                 .bus_num = 0,
1244                 .chip_select = 1, /* CS, change it for your board */
1245                 .platform_data = NULL, /* No spi_driver specific config */
1246                 .mode = SPI_MODE_1,
1247         },
1248 #endif
1249 #if defined(CONFIG_ADE7854_SPI) \
1250         || defined(CONFIG_ADE7854_SPI_MODULE)
1251         {
1252                 .modalias = "ade7854",
1253                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1254                 .bus_num = 0,
1255                 .chip_select = 1, /* CS, change it for your board */
1256                 .platform_data = NULL, /* No spi_driver specific config */
1257                 .mode = SPI_MODE_3,
1258         },
1259 #endif
1260 #if defined(CONFIG_ADIS16060) \
1261         || defined(CONFIG_ADIS16060_MODULE)
1262         {
1263                 .modalias = "adis16060_r",
1264                 .max_speed_hz = 2900000,     /* max spi clock (SCK) speed in HZ */
1265                 .bus_num = 0,
1266                 .chip_select = MAX_CTRL_CS + 1, /* CS for read, change it for your board */
1267                 .platform_data = NULL, /* No spi_driver specific config */
1268                 .mode = SPI_MODE_0,
1269         },
1270         {
1271                 .modalias = "adis16060_w",
1272                 .max_speed_hz = 2900000,     /* max spi clock (SCK) speed in HZ */
1273                 .bus_num = 0,
1274                 .chip_select = 2, /* CS for write, change it for your board */
1275                 .platform_data = NULL, /* No spi_driver specific config */
1276                 .mode = SPI_MODE_1,
1277         },
1278 #endif
1279 #if defined(CONFIG_ADIS16130) \
1280         || defined(CONFIG_ADIS16130_MODULE)
1281         {
1282                 .modalias = "adis16130",
1283                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1284                 .bus_num = 0,
1285                 .chip_select = 1, /* CS for read, change it for your board */
1286                 .platform_data = NULL, /* No spi_driver specific config */
1287                 .mode = SPI_MODE_3,
1288         },
1289 #endif
1290 #if defined(CONFIG_ADIS16201) \
1291         || defined(CONFIG_ADIS16201_MODULE)
1292         {
1293                 .modalias = "adis16201",
1294                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1295                 .bus_num = 0,
1296                 .chip_select = 5, /* CS, change it for your board */
1297                 .platform_data = NULL, /* No spi_driver specific config */
1298                 .mode = SPI_MODE_3,
1299                 .irq = IRQ_PF4,
1300         },
1301 #endif
1302 #if defined(CONFIG_ADIS16203) \
1303         || defined(CONFIG_ADIS16203_MODULE)
1304         {
1305                 .modalias = "adis16203",
1306                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1307                 .bus_num = 0,
1308                 .chip_select = 5, /* CS, change it for your board */
1309                 .platform_data = NULL, /* No spi_driver specific config */
1310                 .mode = SPI_MODE_3,
1311                 .irq = IRQ_PF4,
1312         },
1313 #endif
1314 #if defined(CONFIG_ADIS16204) \
1315         || defined(CONFIG_ADIS16204_MODULE)
1316         {
1317                 .modalias = "adis16204",
1318                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1319                 .bus_num = 0,
1320                 .chip_select = 5, /* CS, change it for your board */
1321                 .platform_data = NULL, /* No spi_driver specific config */
1322                 .mode = SPI_MODE_3,
1323                 .irq = IRQ_PF4,
1324         },
1325 #endif
1326 #if defined(CONFIG_ADIS16209) \
1327         || defined(CONFIG_ADIS16209_MODULE)
1328         {
1329                 .modalias = "adis16209",
1330                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1331                 .bus_num = 0,
1332                 .chip_select = 5, /* CS, change it for your board */
1333                 .platform_data = NULL, /* No spi_driver specific config */
1334                 .mode = SPI_MODE_3,
1335                 .irq = IRQ_PF4,
1336         },
1337 #endif
1338 #if defined(CONFIG_ADIS16220) \
1339         || defined(CONFIG_ADIS16220_MODULE)
1340         {
1341                 .modalias = "adis16220",
1342                 .max_speed_hz = 2000000,     /* max spi clock (SCK) speed in HZ */
1343                 .bus_num = 0,
1344                 .chip_select = 5, /* CS, change it for your board */
1345                 .platform_data = NULL, /* No spi_driver specific config */
1346                 .mode = SPI_MODE_3,
1347                 .irq = IRQ_PF4,
1348         },
1349 #endif
1350 #if defined(CONFIG_ADIS16240) \
1351         || defined(CONFIG_ADIS16240_MODULE)
1352         {
1353                 .modalias = "adis16240",
1354                 .max_speed_hz = 1500000,     /* max spi clock (SCK) speed in HZ */
1355                 .bus_num = 0,
1356                 .chip_select = 5, /* CS, change it for your board */
1357                 .platform_data = NULL, /* No spi_driver specific config */
1358                 .mode = SPI_MODE_3,
1359                 .irq = IRQ_PF4,
1360         },
1361 #endif
1362 #if defined(CONFIG_ADIS16260) \
1363         || defined(CONFIG_ADIS16260_MODULE)
1364         {
1365                 .modalias = "adis16260",
1366                 .max_speed_hz = 1500000,     /* max spi clock (SCK) speed in HZ */
1367                 .bus_num = 0,
1368                 .chip_select = 5, /* CS, change it for your board */
1369                 .platform_data = NULL, /* No spi_driver specific config */
1370                 .mode = SPI_MODE_3,
1371                 .irq = IRQ_PF4,
1372         },
1373 #endif
1374 #if defined(CONFIG_ADIS16261) \
1375         || defined(CONFIG_ADIS16261_MODULE)
1376         {
1377                 .modalias = "adis16261",
1378                 .max_speed_hz = 2500000,     /* max spi clock (SCK) speed in HZ */
1379                 .bus_num = 0,
1380                 .chip_select = 1, /* CS, change it for your board */
1381                 .platform_data = NULL, /* No spi_driver specific config */
1382                 .mode = SPI_MODE_3,
1383         },
1384 #endif
1385 #if defined(CONFIG_ADIS16300) \
1386         || defined(CONFIG_ADIS16300_MODULE)
1387         {
1388                 .modalias = "adis16300",
1389                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1390                 .bus_num = 0,
1391                 .chip_select = 5, /* CS, change it for your board */
1392                 .platform_data = NULL, /* No spi_driver specific config */
1393                 .mode = SPI_MODE_3,
1394                 .irq = IRQ_PF4,
1395         },
1396 #endif
1397 #if defined(CONFIG_ADIS16350) \
1398         || defined(CONFIG_ADIS16350_MODULE)
1399         {
1400                 .modalias = "adis16364",
1401                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1402                 .bus_num = 0,
1403                 .chip_select = 5, /* CS, change it for your board */
1404                 .platform_data = NULL, /* No spi_driver specific config */
1405                 .mode = SPI_MODE_3,
1406                 .irq = IRQ_PF4,
1407         },
1408 #endif
1409 #if defined(CONFIG_ADIS16400) \
1410         || defined(CONFIG_ADIS16400_MODULE)
1411         {
1412                 .modalias = "adis16400",
1413                 .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
1414                 .bus_num = 0,
1415                 .chip_select = 1, /* CS, change it for your board */
1416                 .platform_data = NULL, /* No spi_driver specific config */
1417                 .mode = SPI_MODE_3,
1418         },
1419 #endif
1420 };
1421
1422 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1423 /* SPI controller data */
1424 static struct bfin5xx_spi_master bfin_spi0_info = {
1425         .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
1426         .enable_dma = 1,  /* master has the ability to do dma transfer */
1427         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
1428 };
1429
1430 /* SPI (0) */
1431 static struct resource bfin_spi0_resource[] = {
1432         [0] = {
1433                 .start = SPI0_REGBASE,
1434                 .end   = SPI0_REGBASE + 0xFF,
1435                 .flags = IORESOURCE_MEM,
1436                 },
1437         [1] = {
1438                 .start = CH_SPI,
1439                 .end   = CH_SPI,
1440                 .flags = IORESOURCE_DMA,
1441         },
1442         [2] = {
1443                 .start = IRQ_SPI,
1444                 .end   = IRQ_SPI,
1445                 .flags = IORESOURCE_IRQ,
1446         },
1447 };
1448
1449 static struct platform_device bfin_spi0_device = {
1450         .name = "bfin-spi",
1451         .id = 0, /* Bus number */
1452         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
1453         .resource = bfin_spi0_resource,
1454         .dev = {
1455                 .platform_data = &bfin_spi0_info, /* Passed to driver */
1456         },
1457 };
1458 #endif  /* spi master and devices */
1459
1460 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
1461
1462 /* SPORT SPI controller data */
1463 static struct bfin5xx_spi_master bfin_sport_spi0_info = {
1464         .num_chipselect = 1, /* master only supports one device */
1465         .enable_dma = 0,  /* master don't support DMA */
1466         .pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
1467                 P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
1468 };
1469
1470 static struct resource bfin_sport_spi0_resource[] = {
1471         [0] = {
1472                 .start = SPORT0_TCR1,
1473                 .end   = SPORT0_TCR1 + 0xFF,
1474                 .flags = IORESOURCE_MEM,
1475                 },
1476         [1] = {
1477                 .start = IRQ_SPORT0_ERROR,
1478                 .end   = IRQ_SPORT0_ERROR,
1479                 .flags = IORESOURCE_IRQ,
1480                 },
1481 };
1482
1483 static struct platform_device bfin_sport_spi0_device = {
1484         .name = "bfin-sport-spi",
1485         .id = 1, /* Bus number */
1486         .num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
1487         .resource = bfin_sport_spi0_resource,
1488         .dev = {
1489                 .platform_data = &bfin_sport_spi0_info, /* Passed to driver */
1490         },
1491 };
1492
1493 static struct bfin5xx_spi_master bfin_sport_spi1_info = {
1494         .num_chipselect = 1, /* master only supports one device */
1495         .enable_dma = 0,  /* master don't support DMA */
1496         .pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
1497                 P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
1498 };
1499
1500 static struct resource bfin_sport_spi1_resource[] = {
1501         [0] = {
1502                 .start = SPORT1_TCR1,
1503                 .end   = SPORT1_TCR1 + 0xFF,
1504                 .flags = IORESOURCE_MEM,
1505                 },
1506         [1] = {
1507                 .start = IRQ_SPORT1_ERROR,
1508                 .end   = IRQ_SPORT1_ERROR,
1509                 .flags = IORESOURCE_IRQ,
1510                 },
1511 };
1512
1513 static struct platform_device bfin_sport_spi1_device = {
1514         .name = "bfin-sport-spi",
1515         .id = 2, /* Bus number */
1516         .num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
1517         .resource = bfin_sport_spi1_resource,
1518         .dev = {
1519                 .platform_data = &bfin_sport_spi1_info, /* Passed to driver */
1520         },
1521 };
1522
1523 #endif  /* sport spi master and devices */
1524
1525 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
1526 static struct platform_device bfin_fb_device = {
1527         .name = "bf537-lq035",
1528 };
1529 #endif
1530
1531 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1532 #include <asm/bfin-lq035q1.h>
1533
1534 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
1535         .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
1536         .ppi_mode = USE_RGB565_16_BIT_PPI,
1537         .use_bl = 0,    /* let something else control the LCD Blacklight */
1538         .gpio_bl = GPIO_PF7,
1539 };
1540
1541 static struct resource bfin_lq035q1_resources[] = {
1542         {
1543                 .start = IRQ_PPI_ERROR,
1544                 .end = IRQ_PPI_ERROR,
1545                 .flags = IORESOURCE_IRQ,
1546         },
1547 };
1548
1549 static struct platform_device bfin_lq035q1_device = {
1550         .name           = "bfin-lq035q1",
1551         .id             = -1,
1552         .num_resources  = ARRAY_SIZE(bfin_lq035q1_resources),
1553         .resource       = bfin_lq035q1_resources,
1554         .dev            = {
1555                 .platform_data = &bfin_lq035q1_data,
1556         },
1557 };
1558 #endif
1559
1560 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1561 #ifdef CONFIG_SERIAL_BFIN_UART0
1562 static struct resource bfin_uart0_resources[] = {
1563         {
1564                 .start = UART0_THR,
1565                 .end = UART0_GCTL+2,
1566                 .flags = IORESOURCE_MEM,
1567         },
1568         {
1569                 .start = IRQ_UART0_TX,
1570                 .end = IRQ_UART0_TX,
1571                 .flags = IORESOURCE_IRQ,
1572         },
1573         {
1574                 .start = IRQ_UART0_RX,
1575                 .end = IRQ_UART0_RX,
1576                 .flags = IORESOURCE_IRQ,
1577         },
1578         {
1579                 .start = IRQ_UART0_ERROR,
1580                 .end = IRQ_UART0_ERROR,
1581                 .flags = IORESOURCE_IRQ,
1582         },
1583         {
1584                 .start = CH_UART0_TX,
1585                 .end = CH_UART0_TX,
1586                 .flags = IORESOURCE_DMA,
1587         },
1588         {
1589                 .start = CH_UART0_RX,
1590                 .end = CH_UART0_RX,
1591                 .flags = IORESOURCE_DMA,
1592         },
1593 #ifdef CONFIG_BFIN_UART0_CTSRTS
1594         {       /* CTS pin */
1595                 .start = GPIO_PG7,
1596                 .end = GPIO_PG7,
1597                 .flags = IORESOURCE_IO,
1598         },
1599         {       /* RTS pin */
1600                 .start = GPIO_PG6,
1601                 .end = GPIO_PG6,
1602                 .flags = IORESOURCE_IO,
1603         },
1604 #endif
1605 };
1606
1607 static unsigned short bfin_uart0_peripherals[] = {
1608         P_UART0_TX, P_UART0_RX, 0
1609 };
1610
1611 static struct platform_device bfin_uart0_device = {
1612         .name = "bfin-uart",
1613         .id = 0,
1614         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
1615         .resource = bfin_uart0_resources,
1616         .dev = {
1617                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
1618         },
1619 };
1620 #endif
1621 #ifdef CONFIG_SERIAL_BFIN_UART1
1622 static struct resource bfin_uart1_resources[] = {
1623         {
1624                 .start = UART1_THR,
1625                 .end = UART1_GCTL+2,
1626                 .flags = IORESOURCE_MEM,
1627         },
1628         {
1629                 .start = IRQ_UART1_TX,
1630                 .end = IRQ_UART1_TX,
1631                 .flags = IORESOURCE_IRQ,
1632         },
1633         {
1634                 .start = IRQ_UART1_RX,
1635                 .end = IRQ_UART1_RX,
1636                 .flags = IORESOURCE_IRQ,
1637         },
1638         {
1639                 .start = IRQ_UART1_ERROR,
1640                 .end = IRQ_UART1_ERROR,
1641                 .flags = IORESOURCE_IRQ,
1642         },
1643         {
1644                 .start = CH_UART1_TX,
1645                 .end = CH_UART1_TX,
1646                 .flags = IORESOURCE_DMA,
1647         },
1648         {
1649                 .start = CH_UART1_RX,
1650                 .end = CH_UART1_RX,
1651                 .flags = IORESOURCE_DMA,
1652         },
1653 };
1654
1655 static unsigned short bfin_uart1_peripherals[] = {
1656         P_UART1_TX, P_UART1_RX, 0
1657 };
1658
1659 static struct platform_device bfin_uart1_device = {
1660         .name = "bfin-uart",
1661         .id = 1,
1662         .num_resources = ARRAY_SIZE(bfin_uart1_resources),
1663         .resource = bfin_uart1_resources,
1664         .dev = {
1665                 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
1666         },
1667 };
1668 #endif
1669 #endif
1670
1671 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1672 #ifdef CONFIG_BFIN_SIR0
1673 static struct resource bfin_sir0_resources[] = {
1674         {
1675                 .start = 0xFFC00400,
1676                 .end = 0xFFC004FF,
1677                 .flags = IORESOURCE_MEM,
1678         },
1679         {
1680                 .start = IRQ_UART0_RX,
1681                 .end = IRQ_UART0_RX+1,
1682                 .flags = IORESOURCE_IRQ,
1683         },
1684         {
1685                 .start = CH_UART0_RX,
1686                 .end = CH_UART0_RX+1,
1687                 .flags = IORESOURCE_DMA,
1688         },
1689 };
1690
1691 static struct platform_device bfin_sir0_device = {
1692         .name = "bfin_sir",
1693         .id = 0,
1694         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
1695         .resource = bfin_sir0_resources,
1696 };
1697 #endif
1698 #ifdef CONFIG_BFIN_SIR1
1699 static struct resource bfin_sir1_resources[] = {
1700         {
1701                 .start = 0xFFC02000,
1702                 .end = 0xFFC020FF,
1703                 .flags = IORESOURCE_MEM,
1704         },
1705         {
1706                 .start = IRQ_UART1_RX,
1707                 .end = IRQ_UART1_RX+1,
1708                 .flags = IORESOURCE_IRQ,
1709         },
1710         {
1711                 .start = CH_UART1_RX,
1712                 .end = CH_UART1_RX+1,
1713                 .flags = IORESOURCE_DMA,
1714         },
1715 };
1716
1717 static struct platform_device bfin_sir1_device = {
1718         .name = "bfin_sir",
1719         .id = 1,
1720         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
1721         .resource = bfin_sir1_resources,
1722 };
1723 #endif
1724 #endif
1725
1726 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1727 static struct resource bfin_twi0_resource[] = {
1728         [0] = {
1729                 .start = TWI0_REGBASE,
1730                 .end   = TWI0_REGBASE,
1731                 .flags = IORESOURCE_MEM,
1732         },
1733         [1] = {
1734                 .start = IRQ_TWI,
1735                 .end   = IRQ_TWI,
1736                 .flags = IORESOURCE_IRQ,
1737         },
1738 };
1739
1740 static struct platform_device i2c_bfin_twi_device = {
1741         .name = "i2c-bfin-twi",
1742         .id = 0,
1743         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
1744         .resource = bfin_twi0_resource,
1745 };
1746 #endif
1747
1748 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
1749 static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
1750         [0]      = KEY_GRAVE,
1751         [1]      = KEY_1,
1752         [2]      = KEY_2,
1753         [3]      = KEY_3,
1754         [4]      = KEY_4,
1755         [5]      = KEY_5,
1756         [6]      = KEY_6,
1757         [7]      = KEY_7,
1758         [8]      = KEY_8,
1759         [9]      = KEY_9,
1760         [10]     = KEY_0,
1761         [11]     = KEY_MINUS,
1762         [12]     = KEY_EQUAL,
1763         [13]     = KEY_BACKSLASH,
1764         [15]     = KEY_KP0,
1765         [16]     = KEY_Q,
1766         [17]     = KEY_W,
1767         [18]     = KEY_E,
1768         [19]     = KEY_R,
1769         [20]     = KEY_T,
1770         [21]     = KEY_Y,
1771         [22]     = KEY_U,
1772         [23]     = KEY_I,
1773         [24]     = KEY_O,
1774         [25]     = KEY_P,
1775         [26]     = KEY_LEFTBRACE,
1776         [27]     = KEY_RIGHTBRACE,
1777         [29]     = KEY_KP1,
1778         [30]     = KEY_KP2,
1779         [31]     = KEY_KP3,
1780         [32]     = KEY_A,
1781         [33]     = KEY_S,
1782         [34]     = KEY_D,
1783         [35]     = KEY_F,
1784         [36]     = KEY_G,
1785         [37]     = KEY_H,
1786         [38]     = KEY_J,
1787         [39]     = KEY_K,
1788         [40]     = KEY_L,
1789         [41]     = KEY_SEMICOLON,
1790         [42]     = KEY_APOSTROPHE,
1791         [43]     = KEY_BACKSLASH,
1792         [45]     = KEY_KP4,
1793         [46]     = KEY_KP5,
1794         [47]     = KEY_KP6,
1795         [48]     = KEY_102ND,
1796         [49]     = KEY_Z,
1797         [50]     = KEY_X,
1798         [51]     = KEY_C,
1799         [52]     = KEY_V,
1800         [53]     = KEY_B,
1801         [54]     = KEY_N,
1802         [55]     = KEY_M,
1803         [56]     = KEY_COMMA,
1804         [57]     = KEY_DOT,
1805         [58]     = KEY_SLASH,
1806         [60]     = KEY_KPDOT,
1807         [61]     = KEY_KP7,
1808         [62]     = KEY_KP8,
1809         [63]     = KEY_KP9,
1810         [64]     = KEY_SPACE,
1811         [65]     = KEY_BACKSPACE,
1812         [66]     = KEY_TAB,
1813         [67]     = KEY_KPENTER,
1814         [68]     = KEY_ENTER,
1815         [69]     = KEY_ESC,
1816         [70]     = KEY_DELETE,
1817         [74]     = KEY_KPMINUS,
1818         [76]     = KEY_UP,
1819         [77]     = KEY_DOWN,
1820         [78]     = KEY_RIGHT,
1821         [79]     = KEY_LEFT,
1822 };
1823
1824 static struct adp5588_kpad_platform_data adp5588_kpad_data = {
1825         .rows           = 8,
1826         .cols           = 10,
1827         .keymap         = adp5588_keymap,
1828         .keymapsize     = ARRAY_SIZE(adp5588_keymap),
1829         .repeat         = 0,
1830 };
1831 #endif
1832
1833 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
1834 #include <linux/mfd/adp5520.h>
1835
1836         /*
1837          *  ADP5520/5501 Backlight Data
1838          */
1839
1840 static struct adp5520_backlight_platform_data adp5520_backlight_data = {
1841         .fade_in                = ADP5520_FADE_T_1200ms,
1842         .fade_out               = ADP5520_FADE_T_1200ms,
1843         .fade_led_law           = ADP5520_BL_LAW_LINEAR,
1844         .en_ambl_sens           = 1,
1845         .abml_filt              = ADP5520_BL_AMBL_FILT_640ms,
1846         .l1_daylight_max        = ADP5520_BL_CUR_mA(15),
1847         .l1_daylight_dim        = ADP5520_BL_CUR_mA(0),
1848         .l2_office_max          = ADP5520_BL_CUR_mA(7),
1849         .l2_office_dim          = ADP5520_BL_CUR_mA(0),
1850         .l3_dark_max            = ADP5520_BL_CUR_mA(3),
1851         .l3_dark_dim            = ADP5520_BL_CUR_mA(0),
1852         .l2_trip                = ADP5520_L2_COMP_CURR_uA(700),
1853         .l2_hyst                = ADP5520_L2_COMP_CURR_uA(50),
1854         .l3_trip                = ADP5520_L3_COMP_CURR_uA(80),
1855         .l3_hyst                = ADP5520_L3_COMP_CURR_uA(20),
1856 };
1857
1858         /*
1859          *  ADP5520/5501 LEDs Data
1860          */
1861
1862 static struct led_info adp5520_leds[] = {
1863         {
1864                 .name = "adp5520-led1",
1865                 .default_trigger = "none",
1866                 .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
1867         },
1868 #ifdef ADP5520_EN_ALL_LEDS
1869         {
1870                 .name = "adp5520-led2",
1871                 .default_trigger = "none",
1872                 .flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1,
1873         },
1874         {
1875                 .name = "adp5520-led3",
1876                 .default_trigger = "none",
1877                 .flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2,
1878         },
1879 #endif
1880 };
1881
1882 static struct adp5520_leds_platform_data adp5520_leds_data = {
1883         .num_leds = ARRAY_SIZE(adp5520_leds),
1884         .leds = adp5520_leds,
1885         .fade_in = ADP5520_FADE_T_600ms,
1886         .fade_out = ADP5520_FADE_T_600ms,
1887         .led_on_time = ADP5520_LED_ONT_600ms,
1888 };
1889
1890         /*
1891          *  ADP5520 GPIO Data
1892          */
1893
1894 static struct adp5520_gpio_platform_data adp5520_gpio_data = {
1895         .gpio_start = 50,
1896         .gpio_en_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
1897         .gpio_pullup_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
1898 };
1899
1900         /*
1901          *  ADP5520 Keypad Data
1902          */
1903
1904 static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
1905         [ADP5520_KEY(0, 0)]     = KEY_GRAVE,
1906         [ADP5520_KEY(0, 1)]     = KEY_1,
1907         [ADP5520_KEY(0, 2)]     = KEY_2,
1908         [ADP5520_KEY(0, 3)]     = KEY_3,
1909         [ADP5520_KEY(1, 0)]     = KEY_4,
1910         [ADP5520_KEY(1, 1)]     = KEY_5,
1911         [ADP5520_KEY(1, 2)]     = KEY_6,
1912         [ADP5520_KEY(1, 3)]     = KEY_7,
1913         [ADP5520_KEY(2, 0)]     = KEY_8,
1914         [ADP5520_KEY(2, 1)]     = KEY_9,
1915         [ADP5520_KEY(2, 2)]     = KEY_0,
1916         [ADP5520_KEY(2, 3)]     = KEY_MINUS,
1917         [ADP5520_KEY(3, 0)]     = KEY_EQUAL,
1918         [ADP5520_KEY(3, 1)]     = KEY_BACKSLASH,
1919         [ADP5520_KEY(3, 2)]     = KEY_BACKSPACE,
1920         [ADP5520_KEY(3, 3)]     = KEY_ENTER,
1921 };
1922
1923 static struct adp5520_keys_platform_data adp5520_keys_data = {
1924         .rows_en_mask   = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
1925         .cols_en_mask   = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
1926         .keymap         = adp5520_keymap,
1927         .keymapsize     = ARRAY_SIZE(adp5520_keymap),
1928         .repeat         = 0,
1929 };
1930
1931         /*
1932          *  ADP5520/5501 Multifunction Device Init Data
1933          */
1934
1935 static struct adp5520_platform_data adp5520_pdev_data = {
1936         .backlight = &adp5520_backlight_data,
1937         .leds = &adp5520_leds_data,
1938         .gpio = &adp5520_gpio_data,
1939         .keys = &adp5520_keys_data,
1940 };
1941
1942 #endif
1943
1944 #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
1945 static struct adp5588_gpio_platform_data adp5588_gpio_data = {
1946         .gpio_start = 50,
1947         .pullup_dis_mask = 0,
1948 };
1949 #endif
1950
1951 #if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
1952 #include <linux/i2c/adp8870.h>
1953 static struct led_info adp8870_leds[] = {
1954         {
1955                 .name = "adp8870-led7",
1956                 .default_trigger = "none",
1957                 .flags = ADP8870_LED_D7 | ADP8870_LED_OFFT_600ms,
1958         },
1959 };
1960
1961
1962 static struct adp8870_backlight_platform_data adp8870_pdata = {
1963         .bl_led_assign = ADP8870_BL_D1 | ADP8870_BL_D2 | ADP8870_BL_D3 |
1964                          ADP8870_BL_D4 | ADP8870_BL_D5 | ADP8870_BL_D6, /* 1 = Backlight 0 = Individual LED */
1965         .pwm_assign = 0,                                /* 1 = Enables PWM mode */
1966
1967         .bl_fade_in = ADP8870_FADE_T_1200ms,            /* Backlight Fade-In Timer */
1968         .bl_fade_out = ADP8870_FADE_T_1200ms,           /* Backlight Fade-Out Timer */
1969         .bl_fade_law = ADP8870_FADE_LAW_CUBIC1,         /* fade-on/fade-off transfer characteristic */
1970
1971         .en_ambl_sens = 1,                              /* 1 = enable ambient light sensor */
1972         .abml_filt = ADP8870_BL_AMBL_FILT_320ms,        /* Light sensor filter time */
1973
1974         .l1_daylight_max = ADP8870_BL_CUR_mA(20),       /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
1975         .l1_daylight_dim = ADP8870_BL_CUR_mA(0),        /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
1976         .l2_bright_max = ADP8870_BL_CUR_mA(14),         /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
1977         .l2_bright_dim = ADP8870_BL_CUR_mA(0),          /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
1978         .l3_office_max = ADP8870_BL_CUR_mA(6),          /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
1979         .l3_office_dim = ADP8870_BL_CUR_mA(0),          /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
1980         .l4_indoor_max = ADP8870_BL_CUR_mA(3),          /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
1981         .l4_indor_dim = ADP8870_BL_CUR_mA(0),           /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
1982         .l5_dark_max = ADP8870_BL_CUR_mA(2),            /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
1983         .l5_dark_dim = ADP8870_BL_CUR_mA(0),            /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
1984
1985         .l2_trip = ADP8870_L2_COMP_CURR_uA(710),        /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
1986         .l2_hyst = ADP8870_L2_COMP_CURR_uA(73),         /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
1987         .l3_trip = ADP8870_L3_COMP_CURR_uA(389),        /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
1988         .l3_hyst = ADP8870_L3_COMP_CURR_uA(54),         /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
1989         .l4_trip = ADP8870_L4_COMP_CURR_uA(167),        /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
1990         .l4_hyst = ADP8870_L4_COMP_CURR_uA(16),         /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
1991         .l5_trip = ADP8870_L5_COMP_CURR_uA(43),         /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */
1992         .l5_hyst = ADP8870_L5_COMP_CURR_uA(11),         /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */
1993
1994         .leds = adp8870_leds,
1995         .num_leds = ARRAY_SIZE(adp8870_leds),
1996         .led_fade_law = ADP8870_FADE_LAW_SQUARE,        /* fade-on/fade-off transfer characteristic */
1997         .led_fade_in = ADP8870_FADE_T_600ms,
1998         .led_fade_out = ADP8870_FADE_T_600ms,
1999         .led_on_time = ADP8870_LED_ONT_200ms,
2000 };
2001 #endif
2002
2003 #if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
2004 #include <linux/i2c/adp8860.h>
2005 #include <linux/export.h>
2006 static struct led_info adp8860_leds[] = {
2007         {
2008                 .name = "adp8860-led7",
2009                 .default_trigger = "none",
2010                 .flags = ADP8860_LED_D7 | ADP8860_LED_OFFT_600ms,
2011         },
2012 };
2013
2014 static struct adp8860_backlight_platform_data adp8860_pdata = {
2015         .bl_led_assign = ADP8860_BL_D1 | ADP8860_BL_D2 | ADP8860_BL_D3 |
2016                          ADP8860_BL_D4 | ADP8860_BL_D5 | ADP8860_BL_D6, /* 1 = Backlight 0 = Individual LED */
2017
2018         .bl_fade_in = ADP8860_FADE_T_1200ms,            /* Backlight Fade-In Timer */
2019         .bl_fade_out = ADP8860_FADE_T_1200ms,           /* Backlight Fade-Out Timer */
2020         .bl_fade_law = ADP8860_FADE_LAW_CUBIC1,         /* fade-on/fade-off transfer characteristic */
2021
2022         .en_ambl_sens = 1,                              /* 1 = enable ambient light sensor */
2023         .abml_filt = ADP8860_BL_AMBL_FILT_320ms,        /* Light sensor filter time */
2024
2025         .l1_daylight_max = ADP8860_BL_CUR_mA(20),       /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2026         .l1_daylight_dim = ADP8860_BL_CUR_mA(0),        /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2027         .l2_office_max = ADP8860_BL_CUR_mA(6),          /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2028         .l2_office_dim = ADP8860_BL_CUR_mA(0),          /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2029         .l3_dark_max = ADP8860_BL_CUR_mA(2),            /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
2030         .l3_dark_dim = ADP8860_BL_CUR_mA(0),            /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
2031
2032         .l2_trip = ADP8860_L2_COMP_CURR_uA(710),        /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2033         .l2_hyst = ADP8860_L2_COMP_CURR_uA(73),         /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
2034         .l3_trip = ADP8860_L3_COMP_CURR_uA(43),         /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2035         .l3_hyst = ADP8860_L3_COMP_CURR_uA(11),         /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
2036
2037         .leds = adp8860_leds,
2038         .num_leds = ARRAY_SIZE(adp8860_leds),
2039         .led_fade_law = ADP8860_FADE_LAW_SQUARE,        /* fade-on/fade-off transfer characteristic */
2040         .led_fade_in = ADP8860_FADE_T_600ms,
2041         .led_fade_out = ADP8860_FADE_T_600ms,
2042         .led_on_time = ADP8860_LED_ONT_200ms,
2043 };
2044 #endif
2045
2046 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
2047 static struct regulator_consumer_supply ad5398_consumer = {
2048         .supply = "current",
2049 };
2050
2051 static struct regulator_init_data ad5398_regulator_data = {
2052         .constraints = {
2053                 .name = "current range",
2054                 .max_uA = 120000,
2055                 .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
2056         },
2057         .num_consumer_supplies = 1,
2058         .consumer_supplies     = &ad5398_consumer,
2059 };
2060
2061 #if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
2062         defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
2063 static struct platform_device ad5398_virt_consumer_device = {
2064         .name = "reg-virt-consumer",
2065         .id = 0,
2066         .dev = {
2067                 .platform_data = "current", /* Passed to driver */
2068         },
2069 };
2070 #endif
2071 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2072         defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2073 static struct regulator_bulk_data ad5398_bulk_data = {
2074         .supply = "current",
2075 };
2076
2077 static struct regulator_userspace_consumer_data ad5398_userspace_comsumer_data = {
2078         .name = "ad5398",
2079         .num_supplies = 1,
2080         .supplies = &ad5398_bulk_data,
2081 };
2082
2083 static struct platform_device ad5398_userspace_consumer_device = {
2084         .name = "reg-userspace-consumer",
2085         .id = 0,
2086         .dev = {
2087                 .platform_data = &ad5398_userspace_comsumer_data,
2088         },
2089 };
2090 #endif
2091 #endif
2092
2093 #if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
2094 /* INT bound temperature alarm event. line 1 */
2095 static unsigned long adt7410_platform_data[2] = {
2096         IRQ_PG4, IRQF_TRIGGER_LOW,
2097 };
2098 #endif
2099
2100 #if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
2101 /* INT bound temperature alarm event. line 1 */
2102 static unsigned long adt7316_i2c_data[2] = {
2103         IRQF_TRIGGER_LOW, /* interrupt flags */
2104         GPIO_PF4, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
2105 };
2106 #endif
2107
2108 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
2109 #if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
2110         {
2111                 I2C_BOARD_INFO("ad1937", 0x04),
2112         },
2113 #endif
2114
2115 #if defined(CONFIG_SND_SOC_ADAV80X) || defined(CONFIG_SND_SOC_ADAV80X_MODULE)
2116         {
2117                 I2C_BOARD_INFO("adav803", 0x10),
2118         },
2119 #endif
2120
2121 #if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
2122         {
2123                 I2C_BOARD_INFO("ad7142_captouch", 0x2C),
2124                 .irq = IRQ_PG5,
2125                 .platform_data = (void *)&ad7142_i2c_platform_data,
2126         },
2127 #endif
2128
2129 #if defined(CONFIG_AD7150) || defined(CONFIG_AD7150_MODULE)
2130         {
2131                 I2C_BOARD_INFO("ad7150", 0x48),
2132                 .irq = IRQ_PG5, /* fixme: use real interrupt number */
2133         },
2134 #endif
2135
2136 #if defined(CONFIG_AD7152) || defined(CONFIG_AD7152_MODULE)
2137         {
2138                 I2C_BOARD_INFO("ad7152", 0x48),
2139         },
2140 #endif
2141
2142 #if defined(CONFIG_AD774X) || defined(CONFIG_AD774X_MODULE)
2143         {
2144                 I2C_BOARD_INFO("ad774x", 0x48),
2145         },
2146 #endif
2147
2148 #if defined(CONFIG_ADE7854_I2C) || defined(CONFIG_ADE7854_I2C_MODULE)
2149         {
2150                 I2C_BOARD_INFO("ade7854", 0x38),
2151         },
2152 #endif
2153
2154 #if defined(CONFIG_ADT75) || defined(CONFIG_ADT75_MODULE)
2155         {
2156                 I2C_BOARD_INFO("adt75", 0x9),
2157                 .irq = IRQ_PG5,
2158         },
2159 #endif
2160
2161 #if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
2162         {
2163                 I2C_BOARD_INFO("adt7410", 0x48),
2164                 /* CT critical temperature event. line 0 */
2165                 .irq = IRQ_PG5,
2166                 .platform_data = (void *)&adt7410_platform_data,
2167         },
2168 #endif
2169
2170 #if defined(CONFIG_AD7291) || defined(CONFIG_AD7291_MODULE)
2171         {
2172                 I2C_BOARD_INFO("ad7291", 0x20),
2173                 .irq = IRQ_PG5,
2174         },
2175 #endif
2176
2177 #if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
2178         {
2179                 I2C_BOARD_INFO("adt7316", 0x48),
2180                 .irq = IRQ_PG6,
2181                 .platform_data = (void *)&adt7316_i2c_data,
2182         },
2183 #endif
2184
2185 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
2186         {
2187                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
2188         },
2189 #endif
2190 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
2191         {
2192                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
2193                 .irq = IRQ_PG6,
2194         },
2195 #endif
2196 #if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
2197         {
2198                 I2C_BOARD_INFO("ad7879", 0x2F),
2199                 .irq = IRQ_PG5,
2200                 .platform_data = (void *)&bfin_ad7879_ts_info,
2201         },
2202 #endif
2203 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
2204         {
2205                 I2C_BOARD_INFO("adp5588-keys", 0x34),
2206                 .irq = IRQ_PG0,
2207                 .platform_data = (void *)&adp5588_kpad_data,
2208         },
2209 #endif
2210 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
2211         {
2212                 I2C_BOARD_INFO("pmic-adp5520", 0x32),
2213                 .irq = IRQ_PG0,
2214                 .platform_data = (void *)&adp5520_pdev_data,
2215         },
2216 #endif
2217 #if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
2218         {
2219                 I2C_BOARD_INFO("adxl34x", 0x53),
2220                 .irq = IRQ_PG3,
2221                 .platform_data = (void *)&adxl34x_info,
2222         },
2223 #endif
2224 #if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
2225         {
2226                 I2C_BOARD_INFO("adp5588-gpio", 0x34),
2227                 .platform_data = (void *)&adp5588_gpio_data,
2228         },
2229 #endif
2230 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
2231         {
2232                 I2C_BOARD_INFO("bfin-adv7393", 0x2B),
2233         },
2234 #endif
2235 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
2236         {
2237                 I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2F),
2238         },
2239 #endif
2240 #if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
2241         {
2242                 I2C_BOARD_INFO("adp8870", 0x2B),
2243                 .platform_data = (void *)&adp8870_pdata,
2244         },
2245 #endif
2246 #if defined(CONFIG_SND_SOC_ADAU1371) || defined(CONFIG_SND_SOC_ADAU1371_MODULE)
2247         {
2248                 I2C_BOARD_INFO("adau1371", 0x1A),
2249         },
2250 #endif
2251 #if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
2252         {
2253                 I2C_BOARD_INFO("adau1761", 0x38),
2254         },
2255 #endif
2256 #if defined(CONFIG_SND_SOC_ADAU1361) || defined(CONFIG_SND_SOC_ADAU1361_MODULE)
2257         {
2258                 I2C_BOARD_INFO("adau1361", 0x38),
2259         },
2260 #endif
2261 #if defined(CONFIG_SND_SOC_ADAU1701) || defined(CONFIG_SND_SOC_ADAU1701_MODULE)
2262         {
2263                 I2C_BOARD_INFO("adau1701", 0x34),
2264         },
2265 #endif
2266 #if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE)
2267         {
2268                 I2C_BOARD_INFO("ad5258", 0x18),
2269         },
2270 #endif
2271 #if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
2272         {
2273                 I2C_BOARD_INFO("ssm2602", 0x1b),
2274         },
2275 #endif
2276 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
2277         {
2278                 I2C_BOARD_INFO("ad5398", 0xC),
2279                 .platform_data = (void *)&ad5398_regulator_data,
2280         },
2281 #endif
2282 #if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
2283         {
2284                 I2C_BOARD_INFO("adp8860", 0x2A),
2285                 .platform_data = (void *)&adp8860_pdata,
2286         },
2287 #endif
2288 #if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
2289         {
2290                 I2C_BOARD_INFO("adau1373", 0x1A),
2291         },
2292 #endif
2293 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
2294         {
2295                 I2C_BOARD_INFO("ad5252", 0x2e),
2296         },
2297 #endif
2298 };
2299
2300 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
2301 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2302 static struct resource bfin_sport0_uart_resources[] = {
2303         {
2304                 .start = SPORT0_TCR1,
2305                 .end = SPORT0_MRCS3+4,
2306                 .flags = IORESOURCE_MEM,
2307         },
2308         {
2309                 .start = IRQ_SPORT0_RX,
2310                 .end = IRQ_SPORT0_RX+1,
2311                 .flags = IORESOURCE_IRQ,
2312         },
2313         {
2314                 .start = IRQ_SPORT0_ERROR,
2315                 .end = IRQ_SPORT0_ERROR,
2316                 .flags = IORESOURCE_IRQ,
2317         },
2318 };
2319
2320 static unsigned short bfin_sport0_peripherals[] = {
2321         P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
2322         P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
2323 };
2324
2325 static struct platform_device bfin_sport0_uart_device = {
2326         .name = "bfin-sport-uart",
2327         .id = 0,
2328         .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
2329         .resource = bfin_sport0_uart_resources,
2330         .dev = {
2331                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
2332         },
2333 };
2334 #endif
2335 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2336 static struct resource bfin_sport1_uart_resources[] = {
2337         {
2338                 .start = SPORT1_TCR1,
2339                 .end = SPORT1_MRCS3+4,
2340                 .flags = IORESOURCE_MEM,
2341         },
2342         {
2343                 .start = IRQ_SPORT1_RX,
2344                 .end = IRQ_SPORT1_RX+1,
2345                 .flags = IORESOURCE_IRQ,
2346         },
2347         {
2348                 .start = IRQ_SPORT1_ERROR,
2349                 .end = IRQ_SPORT1_ERROR,
2350                 .flags = IORESOURCE_IRQ,
2351         },
2352 };
2353
2354 static unsigned short bfin_sport1_peripherals[] = {
2355         P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
2356         P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
2357 };
2358
2359 static struct platform_device bfin_sport1_uart_device = {
2360         .name = "bfin-sport-uart",
2361         .id = 1,
2362         .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
2363         .resource = bfin_sport1_uart_resources,
2364         .dev = {
2365                 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
2366         },
2367 };
2368 #endif
2369 #endif
2370
2371 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
2372 #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
2373 /* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
2374
2375 #ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE
2376 #define PATA_INT        IRQ_PF5
2377 static struct pata_platform_info bfin_pata_platform_data = {
2378         .ioport_shift = 1,
2379         .irq_flags = IRQF_TRIGGER_HIGH,
2380 };
2381
2382 static struct resource bfin_pata_resources[] = {
2383         {
2384                 .start = 0x20314020,
2385                 .end = 0x2031403F,
2386                 .flags = IORESOURCE_MEM,
2387         },
2388         {
2389                 .start = 0x2031401C,
2390                 .end = 0x2031401F,
2391                 .flags = IORESOURCE_MEM,
2392         },
2393         {
2394                 .start = PATA_INT,
2395                 .end = PATA_INT,
2396                 .flags = IORESOURCE_IRQ,
2397         },
2398 };
2399 #elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE)
2400 static struct pata_platform_info bfin_pata_platform_data = {
2401         .ioport_shift = 0,
2402 };
2403 /* CompactFlash Storage Card Memory Mapped Addressing
2404  * /REG = A11 = 1
2405  */
2406 static struct resource bfin_pata_resources[] = {
2407         {
2408                 .start = 0x20211800,
2409                 .end = 0x20211807,
2410                 .flags = IORESOURCE_MEM,
2411         },
2412         {
2413                 .start = 0x2021180E,    /* Device Ctl */
2414                 .end = 0x2021180E,
2415                 .flags = IORESOURCE_MEM,
2416         },
2417 };
2418 #endif
2419
2420 static struct platform_device bfin_pata_device = {
2421         .name = "pata_platform",
2422         .id = -1,
2423         .num_resources = ARRAY_SIZE(bfin_pata_resources),
2424         .resource = bfin_pata_resources,
2425         .dev = {
2426                 .platform_data = &bfin_pata_platform_data,
2427         }
2428 };
2429 #endif
2430
2431 static const unsigned int cclk_vlev_datasheet[] =
2432 {
2433         VRPAIR(VLEV_085, 250000000),
2434         VRPAIR(VLEV_090, 376000000),
2435         VRPAIR(VLEV_095, 426000000),
2436         VRPAIR(VLEV_100, 426000000),
2437         VRPAIR(VLEV_105, 476000000),
2438         VRPAIR(VLEV_110, 476000000),
2439         VRPAIR(VLEV_115, 476000000),
2440         VRPAIR(VLEV_120, 500000000),
2441         VRPAIR(VLEV_125, 533000000),
2442         VRPAIR(VLEV_130, 600000000),
2443 };
2444
2445 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
2446         .tuple_tab = cclk_vlev_datasheet,
2447         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
2448         .vr_settling_time = 25 /* us */,
2449 };
2450
2451 static struct platform_device bfin_dpmc = {
2452         .name = "bfin dpmc",
2453         .dev = {
2454                 .platform_data = &bfin_dmpc_vreg_data,
2455         },
2456 };
2457
2458 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
2459         defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \
2460         defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
2461
2462 #define SPORT_REQ(x) \
2463         [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
2464                 P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0}
2465
2466 static const u16 bfin_snd_pin[][7] = {
2467         SPORT_REQ(0),
2468         SPORT_REQ(1),
2469 };
2470
2471 static struct bfin_snd_platform_data bfin_snd_data[] = {
2472         {
2473                 .pin_req = &bfin_snd_pin[0][0],
2474         },
2475         {
2476                 .pin_req = &bfin_snd_pin[1][0],
2477         },
2478 };
2479
2480 #define BFIN_SND_RES(x) \
2481         [x] = { \
2482                 { \
2483                         .start = SPORT##x##_TCR1, \
2484                         .end = SPORT##x##_TCR1, \
2485                         .flags = IORESOURCE_MEM \
2486                 }, \
2487                 { \
2488                         .start = CH_SPORT##x##_RX, \
2489                         .end = CH_SPORT##x##_RX, \
2490                         .flags = IORESOURCE_DMA, \
2491                 }, \
2492                 { \
2493                         .start = CH_SPORT##x##_TX, \
2494                         .end = CH_SPORT##x##_TX, \
2495                         .flags = IORESOURCE_DMA, \
2496                 }, \
2497                 { \
2498                         .start = IRQ_SPORT##x##_ERROR, \
2499                         .end = IRQ_SPORT##x##_ERROR, \
2500                         .flags = IORESOURCE_IRQ, \
2501                 } \
2502         }
2503
2504 static struct resource bfin_snd_resources[][4] = {
2505         BFIN_SND_RES(0),
2506         BFIN_SND_RES(1),
2507 };
2508 #endif
2509
2510 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
2511 static struct platform_device bfin_i2s_pcm = {
2512         .name = "bfin-i2s-pcm-audio",
2513         .id = -1,
2514 };
2515 #endif
2516
2517 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
2518 static struct platform_device bfin_tdm_pcm = {
2519         .name = "bfin-tdm-pcm-audio",
2520         .id = -1,
2521 };
2522 #endif
2523
2524 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
2525 static struct platform_device bfin_ac97_pcm = {
2526         .name = "bfin-ac97-pcm-audio",
2527         .id = -1,
2528 };
2529 #endif
2530
2531 #if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
2532 static struct platform_device bfin_ad73311_codec_device = {
2533         .name = "ad73311",
2534         .id = -1,
2535 };
2536 #endif
2537
2538 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \
2539         defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE)
2540 static struct platform_device bfin_eval_adav801_device = {
2541         .name = "bfin-eval-adav801",
2542         .id = -1,
2543 };
2544 #endif
2545
2546 #if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
2547 static struct platform_device bfin_i2s = {
2548         .name = "bfin-i2s",
2549         .id = CONFIG_SND_BF5XX_SPORT_NUM,
2550         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
2551         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
2552         .dev = {
2553                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
2554         },
2555 };
2556 #endif
2557
2558 #if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE)
2559 static struct platform_device bfin_tdm = {
2560         .name = "bfin-tdm",
2561         .id = CONFIG_SND_BF5XX_SPORT_NUM,
2562         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
2563         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
2564         .dev = {
2565                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
2566         },
2567 };
2568 #endif
2569
2570 #if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
2571 static struct platform_device bfin_ac97 = {
2572         .name = "bfin-ac97",
2573         .id = CONFIG_SND_BF5XX_SPORT_NUM,
2574         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
2575         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
2576         .dev = {
2577                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
2578         },
2579 };
2580 #endif
2581
2582 #if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
2583 #define REGULATOR_ADP122        "adp122"
2584 #define REGULATOR_ADP122_UV     2500000
2585
2586 static struct regulator_consumer_supply adp122_consumers = {
2587                 .supply = REGULATOR_ADP122,
2588 };
2589
2590 static struct regulator_init_data adp_switch_regulator_data = {
2591         .constraints = {
2592                 .name = REGULATOR_ADP122,
2593                 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
2594                 .min_uV = REGULATOR_ADP122_UV,
2595                 .max_uV = REGULATOR_ADP122_UV,
2596                 .min_uA = 0,
2597                 .max_uA = 300000,
2598         },
2599         .num_consumer_supplies = 1,     /* only 1 */
2600         .consumer_supplies     = &adp122_consumers,
2601 };
2602
2603 static struct fixed_voltage_config adp_switch_pdata = {
2604         .supply_name = REGULATOR_ADP122,
2605         .microvolts = REGULATOR_ADP122_UV,
2606         .gpio = GPIO_PF2,
2607         .enable_high = 1,
2608         .enabled_at_boot = 0,
2609         .init_data = &adp_switch_regulator_data,
2610 };
2611
2612 static struct platform_device adp_switch_device = {
2613         .name = "reg-fixed-voltage",
2614         .id = 0,
2615         .dev = {
2616                 .platform_data = &adp_switch_pdata,
2617         },
2618 };
2619
2620 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2621         defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2622 static struct regulator_bulk_data adp122_bulk_data = {
2623         .supply = REGULATOR_ADP122,
2624 };
2625
2626 static struct regulator_userspace_consumer_data adp122_userspace_comsumer_data = {
2627         .name = REGULATOR_ADP122,
2628         .num_supplies = 1,
2629         .supplies = &adp122_bulk_data,
2630 };
2631
2632 static struct platform_device adp122_userspace_consumer_device = {
2633         .name = "reg-userspace-consumer",
2634         .id = 0,
2635         .dev = {
2636                 .platform_data = &adp122_userspace_comsumer_data,
2637         },
2638 };
2639 #endif
2640 #endif
2641
2642 #if defined(CONFIG_IIO_GPIO_TRIGGER) || \
2643         defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
2644
2645 static struct resource iio_gpio_trigger_resources[] = {
2646         [0] = {
2647                 .start  = IRQ_PF5,
2648                 .end    = IRQ_PF5,
2649                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
2650         },
2651 };
2652
2653 static struct platform_device iio_gpio_trigger = {
2654         .name = "iio_gpio_trigger",
2655         .num_resources = ARRAY_SIZE(iio_gpio_trigger_resources),
2656         .resource = iio_gpio_trigger_resources,
2657 };
2658 #endif
2659
2660 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \
2661         defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE)
2662 static struct platform_device bf5xx_adau1373_device = {
2663         .name = "bfin-eval-adau1373",
2664 };
2665 #endif
2666
2667 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \
2668         defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE)
2669 static struct platform_device bf5xx_adau1701_device = {
2670         .name = "bfin-eval-adau1701",
2671 };
2672 #endif
2673
2674 static struct platform_device *stamp_devices[] __initdata = {
2675
2676         &bfin_dpmc,
2677
2678 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
2679         &bfin_pcmcia_cf_device,
2680 #endif
2681
2682 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
2683         &rtc_device,
2684 #endif
2685
2686 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
2687         &sl811_hcd_device,
2688 #endif
2689
2690 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
2691         &isp1362_hcd_device,
2692 #endif
2693
2694 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
2695         &bfin_isp1760_device,
2696 #endif
2697
2698 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
2699         &smc91x_device,
2700 #endif
2701
2702 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
2703         &dm9000_device,
2704 #endif
2705
2706 #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
2707         &bfin_can_device,
2708 #endif
2709
2710 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
2711         &bfin_mii_bus,
2712         &bfin_mac_device,
2713 #endif
2714
2715 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
2716         &net2272_bfin_device,
2717 #endif
2718
2719 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
2720         &bfin_spi0_device,
2721 #endif
2722
2723 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
2724         &bfin_sport_spi0_device,
2725         &bfin_sport_spi1_device,
2726 #endif
2727
2728 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
2729         &bfin_fb_device,
2730 #endif
2731
2732 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
2733         &bfin_lq035q1_device,
2734 #endif
2735
2736 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
2737 #ifdef CONFIG_SERIAL_BFIN_UART0
2738         &bfin_uart0_device,
2739 #endif
2740 #ifdef CONFIG_SERIAL_BFIN_UART1
2741         &bfin_uart1_device,
2742 #endif
2743 #endif
2744
2745 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
2746 #ifdef CONFIG_BFIN_SIR0
2747         &bfin_sir0_device,
2748 #endif
2749 #ifdef CONFIG_BFIN_SIR1
2750         &bfin_sir1_device,
2751 #endif
2752 #endif
2753
2754 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
2755         &i2c_bfin_twi_device,
2756 #endif
2757
2758 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
2759 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2760         &bfin_sport0_uart_device,
2761 #endif
2762 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2763         &bfin_sport1_uart_device,
2764 #endif
2765 #endif
2766
2767 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
2768         &bfin_pata_device,
2769 #endif
2770
2771 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
2772         &bfin_device_gpiokeys,
2773 #endif
2774
2775 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
2776         &bfin_async_nand_device,
2777 #endif
2778
2779 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
2780         &stamp_flash_device,
2781 #endif
2782
2783 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
2784         &bfin_i2s_pcm,
2785 #endif
2786
2787 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
2788         &bfin_tdm_pcm,
2789 #endif
2790
2791 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
2792         &bfin_ac97_pcm,
2793 #endif
2794
2795 #if defined(CONFIG_SND_SOC_AD73311) || defined(CONFIG_SND_SOC_AD73311_MODULE)
2796         &bfin_ad73311_codec_device,
2797 #endif
2798
2799 #if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE)
2800         &bfin_i2s,
2801 #endif
2802
2803 #if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE)
2804         &bfin_tdm,
2805 #endif
2806
2807 #if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE)
2808         &bfin_ac97,
2809 #endif
2810
2811 #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
2812 #if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
2813         defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
2814         &ad5398_virt_consumer_device,
2815 #endif
2816 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2817         defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2818         &ad5398_userspace_consumer_device,
2819 #endif
2820 #endif
2821
2822 #if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
2823         &adp_switch_device,
2824 #if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
2825         defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
2826         &adp122_userspace_consumer_device,
2827 #endif
2828 #endif
2829
2830 #if defined(CONFIG_IIO_GPIO_TRIGGER) || \
2831         defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
2832         &iio_gpio_trigger,
2833 #endif
2834
2835 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) || \
2836         defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373_MODULE)
2837         &bf5xx_adau1373_device,
2838 #endif
2839
2840 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) || \
2841         defined(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701_MODULE)
2842         &bf5xx_adau1701_device,
2843 #endif
2844
2845 #if defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) || \
2846         defined(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X_MODULE)
2847         &bfin_eval_adav801_device,
2848 #endif
2849 };
2850
2851 static int __init net2272_init(void)
2852 {
2853 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
2854         int ret;
2855
2856         ret = gpio_request(GPIO_PF6, "net2272");
2857         if (ret)
2858                 return ret;
2859
2860         /* Reset the USB chip */
2861         gpio_direction_output(GPIO_PF6, 0);
2862         mdelay(2);
2863         gpio_set_value(GPIO_PF6, 1);
2864 #endif
2865
2866         return 0;
2867 }
2868
2869 static int __init stamp_init(void)
2870 {
2871         printk(KERN_INFO "%s(): registering device resources\n", __func__);
2872         bfin_plat_nand_init();
2873         adf702x_mac_init();
2874         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
2875         i2c_register_board_info(0, bfin_i2c_board_info,
2876                                 ARRAY_SIZE(bfin_i2c_board_info));
2877         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
2878
2879         if (net2272_init())
2880                 pr_warning("unable to configure net2272; it probably won't work\n");
2881
2882         return 0;
2883 }
2884
2885 arch_initcall(stamp_init);
2886
2887
2888 static struct platform_device *stamp_early_devices[] __initdata = {
2889 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
2890 #ifdef CONFIG_SERIAL_BFIN_UART0
2891         &bfin_uart0_device,
2892 #endif
2893 #ifdef CONFIG_SERIAL_BFIN_UART1
2894         &bfin_uart1_device,
2895 #endif
2896 #endif
2897
2898 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
2899 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
2900         &bfin_sport0_uart_device,
2901 #endif
2902 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
2903         &bfin_sport1_uart_device,
2904 #endif
2905 #endif
2906 };
2907
2908 void __init native_machine_early_platform_add_devices(void)
2909 {
2910         printk(KERN_INFO "register early platform devices\n");
2911         early_platform_add_devices(stamp_early_devices,
2912                 ARRAY_SIZE(stamp_early_devices));
2913 }
2914
2915 void native_machine_restart(char *cmd)
2916 {
2917         /* workaround reboot hang when booting from SPI */
2918         if ((bfin_read_SYSCR() & 0x7) == 0x3)
2919                 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
2920 }
2921
2922 /*
2923  * Currently the MAC address is saved in Flash by U-Boot
2924  */
2925 #define FLASH_MAC       0x203f0000
2926 void bfin_get_ether_addr(char *addr)
2927 {
2928         *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
2929         *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
2930 }
2931 EXPORT_SYMBOL(bfin_get_ether_addr);