arch/blackfin/mach-bf537/boards/stamp.c

   1 /*
   2  * File:         arch/blackfin/mach-bf537/boards/stamp.c
   3  * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
   4  * Author:       Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Created:
   7  * Description:
   8  *
   9  * Modified:
  10  *               Copyright 2005 National ICT Australia (NICTA)
  11  *               Copyright 2004-2006 Analog Devices Inc.
  12  *
  13  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License as published by
  17  * the Free Software Foundation; either version 2 of the License, or
  18  * (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, see the file COPYING, or write
  27  * to the Free Software Foundation, Inc.,
  28  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  29  */
  30
  31 #include <linux/device.h>
  32 #include <linux/kernel.h>
  33 #include <linux/platform_device.h>
  34 #include <linux/mtd/mtd.h>
  35 #include <linux/mtd/nand.h>
  36 #include <linux/mtd/partitions.h>
  37 #include <linux/mtd/plat-ram.h>
  38 #include <linux/mtd/physmap.h>
  39 #include <linux/spi/spi.h>
  40 #include <linux/spi/flash.h>
  41 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
  42 #include <linux/usb/isp1362.h>
  43 #endif
  44 #include <linux/ata_platform.h>
  45 #include <linux/irq.h>
  46 #include <linux/interrupt.h>
  47 #include <linux/i2c.h>
  48 #include <linux/usb/sl811.h>
  49 #include <linux/spi/mmc_spi.h>
  50 #include <asm/dma.h>
  51 #include <asm/bfin5xx_spi.h>
  52 #include <asm/reboot.h>
  53 #include <asm/portmux.h>
  54 #include <asm/dpmc.h>
  55
  56 /*
  57  * Name the Board for the /proc/cpuinfo
  58  */
  59 const char bfin_board_name[] = "ADI BF537-STAMP";
  60
  61 /*
  62  *  Driver needs to know address, irq and flag pin.
  63  */
  64
  65 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
  66 #include <linux/usb/isp1760.h>
  67 static struct resource bfin_isp1760_resources[] = {
  68         [0] = {
  69                 .start  = 0x203C0000,
  70                 .end    = 0x203C0000 + 0x000fffff,
  71                 .flags  = IORESOURCE_MEM,
  72         },
  73         [1] = {
  74                 .start  = IRQ_PF7,
  75                 .end    = IRQ_PF7,
  76                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
  77         },
  78 };
  79
  80 static struct isp1760_platform_data isp1760_priv = {
  81         .is_isp1761 = 0,
  82         .port1_disable = 0,
  83         .bus_width_16 = 1,
  84         .port1_otg = 0,
  85         .analog_oc = 0,
  86         .dack_polarity_high = 0,
  87         .dreq_polarity_high = 0,
  88 };
  89
  90 static struct platform_device bfin_isp1760_device = {
  91         .name           = "isp1760-hcd",
  92         .id             = 0,
  93         .dev = {
  94                 .platform_data = &isp1760_priv,
  95         },
  96         .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
  97         .resource       = bfin_isp1760_resources,
  98 };
  99 #endif
 100
 101 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 102 #include <linux/input.h>
 103 #include <linux/gpio_keys.h>
 104
 105 static struct gpio_keys_button bfin_gpio_keys_table[] = {
 106         {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"},
 107         {BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"},
 108         {BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"},
 109         {BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"},
 110 };
 111
 112 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
 113         .buttons        = bfin_gpio_keys_table,
 114         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
 115 };
 116
 117 static struct platform_device bfin_device_gpiokeys = {
 118         .name      = "gpio-keys",
 119         .dev = {
 120                 .platform_data = &bfin_gpio_keys_data,
 121         },
 122 };
 123 #endif
 124
 125 static struct resource bfin_gpios_resources = {
 126         .start = 0,
 127         .end   = MAX_BLACKFIN_GPIOS - 1,
 128         .flags = IORESOURCE_IRQ,
 129 };
 130
 131 static struct platform_device bfin_gpios_device = {
 132         .name = "simple-gpio",
 133         .id = -1,
 134         .num_resources = 1,
 135         .resource = &bfin_gpios_resources,
 136 };
 137
 138 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 139 static struct resource bfin_pcmcia_cf_resources[] = {
 140         {
 141                 .start = 0x20310000, /* IO PORT */
 142                 .end = 0x20312000,
 143                 .flags = IORESOURCE_MEM,
 144         }, {
 145                 .start = 0x20311000, /* Attribute Memory */
 146                 .end = 0x20311FFF,
 147                 .flags = IORESOURCE_MEM,
 148         }, {
 149                 .start = IRQ_PF4,
 150                 .end = IRQ_PF4,
 151                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 152         }, {
 153                 .start = 6, /* Card Detect PF6 */
 154                 .end = 6,
 155                 .flags = IORESOURCE_IRQ,
 156         },
 157 };
 158
 159 static struct platform_device bfin_pcmcia_cf_device = {
 160         .name = "bfin_cf_pcmcia",
 161         .id = -1,
 162         .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
 163         .resource = bfin_pcmcia_cf_resources,
 164 };
 165 #endif
 166
 167 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 168 static struct platform_device rtc_device = {
 169         .name = "rtc-bfin",
 170         .id   = -1,
 171 };
 172 #endif
 173
 174 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 175 static struct resource smc91x_resources[] = {
 176         {
 177                 .name = "smc91x-regs",
 178                 .start = 0x20300300,
 179                 .end = 0x20300300 + 16,
 180                 .flags = IORESOURCE_MEM,
 181         }, {
 182
 183                 .start = IRQ_PF7,
 184                 .end = IRQ_PF7,
 185                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 186         },
 187 };
 188 static struct platform_device smc91x_device = {
 189         .name = "smc91x",
 190         .id = 0,
 191         .num_resources = ARRAY_SIZE(smc91x_resources),
 192         .resource = smc91x_resources,
 193 };
 194 #endif
 195
 196 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 197 static struct resource dm9000_resources[] = {
 198         [0] = {
 199                 .start  = 0x203FB800,
 200                 .end    = 0x203FB800 + 8,
 201                 .flags  = IORESOURCE_MEM,
 202         },
 203         [1] = {
 204                 .start  = IRQ_PF9,
 205                 .end    = IRQ_PF9,
 206                 .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
 207         },
 208 };
 209
 210 static struct platform_device dm9000_device = {
 211         .name           = "dm9000",
 212         .id             = -1,
 213         .num_resources  = ARRAY_SIZE(dm9000_resources),
 214         .resource       = dm9000_resources,
 215 };
 216 #endif
 217
 218 #if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
 219 static struct resource ax88180_resources[] = {
 220         [0] = {
 221                 .start  = 0x20300000,
 222                 .end    = 0x20300000 + 0x8000,
 223                 .flags  = IORESOURCE_MEM,
 224         },
 225         [1] = {
 226                 .start  = IRQ_PF7,
 227                 .end    = IRQ_PF7,
 228                 .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL),
 229         },
 230 };
 231
 232 static struct platform_device ax88180_device = {
 233         .name           = "ax88180",
 234         .id             = -1,
 235         .num_resources  = ARRAY_SIZE(ax88180_resources),
 236         .resource       = ax88180_resources,
 237 };
 238 #endif
 239
 240 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
 241 static struct resource sl811_hcd_resources[] = {
 242         {
 243                 .start = 0x20340000,
 244                 .end = 0x20340000,
 245                 .flags = IORESOURCE_MEM,
 246         }, {
 247                 .start = 0x20340004,
 248                 .end = 0x20340004,
 249                 .flags = IORESOURCE_MEM,
 250         }, {
 251                 .start = CONFIG_USB_SL811_BFIN_IRQ,
 252                 .end = CONFIG_USB_SL811_BFIN_IRQ,
 253                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 254         },
 255 };
 256
 257 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
 258 void sl811_port_power(struct device *dev, int is_on)
 259 {
 260         gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
 261         gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
 262 }
 263 #endif
 264
 265 static struct sl811_platform_data sl811_priv = {
 266         .potpg = 10,
 267         .power = 250,       /* == 500mA */
 268 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
 269         .port_power = &sl811_port_power,
 270 #endif
 271 };
 272
 273 static struct platform_device sl811_hcd_device = {
 274         .name = "sl811-hcd",
 275         .id = 0,
 276         .dev = {
 277                 .platform_data = &sl811_priv,
 278         },
 279         .num_resources = ARRAY_SIZE(sl811_hcd_resources),
 280         .resource = sl811_hcd_resources,
 281 };
 282 #endif
 283
 284 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 285 static struct resource isp1362_hcd_resources[] = {
 286         {
 287                 .start = 0x20360000,
 288                 .end = 0x20360000,
 289                 .flags = IORESOURCE_MEM,
 290         }, {
 291                 .start = 0x20360004,
 292                 .end = 0x20360004,
 293                 .flags = IORESOURCE_MEM,
 294         }, {
 295                 .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
 296                 .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
 297                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 298         },
 299 };
 300
 301 static struct isp1362_platform_data isp1362_priv = {
 302         .sel15Kres = 1,
 303         .clknotstop = 0,
 304         .oc_enable = 0,
 305         .int_act_high = 0,
 306         .int_edge_triggered = 0,
 307         .remote_wakeup_connected = 0,
 308         .no_power_switching = 1,
 309         .power_switching_mode = 0,
 310 };
 311
 312 static struct platform_device isp1362_hcd_device = {
 313         .name = "isp1362-hcd",
 314         .id = 0,
 315         .dev = {
 316                 .platform_data = &isp1362_priv,
 317         },
 318         .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
 319         .resource = isp1362_hcd_resources,
 320 };
 321 #endif
 322
 323 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 324 static struct platform_device bfin_mii_bus = {
 325         .name = "bfin_mii_bus",
 326 };
 327
 328 static struct platform_device bfin_mac_device = {
 329         .name = "bfin_mac",
 330         .dev.platform_data = &bfin_mii_bus,
 331 };
 332 #endif
 333
 334 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 335 static struct resource net2272_bfin_resources[] = {
 336         {
 337                 .start = 0x20300000,
 338                 .end = 0x20300000 + 0x100,
 339                 .flags = IORESOURCE_MEM,
 340         }, {
 341                 .start = IRQ_PF7,
 342                 .end = IRQ_PF7,
 343                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 344         },
 345 };
 346
 347 static struct platform_device net2272_bfin_device = {
 348         .name = "net2272",
 349         .id = -1,
 350         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
 351         .resource = net2272_bfin_resources,
 352 };
 353 #endif
 354
 355 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 356 #ifdef CONFIG_MTD_PARTITIONS
 357 const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
 358
 359 static struct mtd_partition bfin_plat_nand_partitions[] = {
 360         {
 361                 .name   = "linux kernel(nand)",
 362                 .size   = 0x400000,
 363                 .offset = 0,
 364         }, {
 365                 .name   = "file system(nand)",
 366                 .size   = MTDPART_SIZ_FULL,
 367                 .offset = MTDPART_OFS_APPEND,
 368         },
 369 };
 370 #endif
 371
 372 #define BFIN_NAND_PLAT_CLE 2
 373 #define BFIN_NAND_PLAT_ALE 1
 374 static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 375 {
 376         struct nand_chip *this = mtd->priv;
 377
 378         if (cmd == NAND_CMD_NONE)
 379                 return;
 380
 381         if (ctrl & NAND_CLE)
 382                 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
 383         else
 384                 writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
 385 }
 386
 387 #define BFIN_NAND_PLAT_READY GPIO_PF3
 388 static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
 389 {
 390         return gpio_get_value(BFIN_NAND_PLAT_READY);
 391 }
 392
 393 static struct platform_nand_data bfin_plat_nand_data = {
 394         .chip = {
 395                 .chip_delay = 30,
 396 #ifdef CONFIG_MTD_PARTITIONS
 397                 .part_probe_types = part_probes,
 398                 .partitions = bfin_plat_nand_partitions,
 399                 .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
 400 #endif
 401         },
 402         .ctrl = {
 403                 .cmd_ctrl  = bfin_plat_nand_cmd_ctrl,
 404                 .dev_ready = bfin_plat_nand_dev_ready,
 405         },
 406 };
 407
 408 #define MAX(x, y) (x > y ? x : y)
 409 static struct resource bfin_plat_nand_resources = {
 410         .start = 0x20212000,
 411         .end   = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
 412         .flags = IORESOURCE_IO,
 413 };
 414
 415 static struct platform_device bfin_async_nand_device = {
 416         .name = "gen_nand",
 417         .id = -1,
 418         .num_resources = 1,
 419         .resource = &bfin_plat_nand_resources,
 420         .dev = {
 421                 .platform_data = &bfin_plat_nand_data,
 422         },
 423 };
 424
 425 static void bfin_plat_nand_init(void)
 426 {
 427         gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
 428 }
 429 #else
 430 static void bfin_plat_nand_init(void) {}
 431 #endif
 432
 433 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 434 static struct mtd_partition stamp_partitions[] = {
 435         {
 436                 .name       = "bootloader(nor)",
 437                 .size       = 0x40000,
 438                 .offset     = 0,
 439         }, {
 440                 .name       = "linux kernel(nor)",
 441                 .size       = 0x180000,
 442                 .offset     = MTDPART_OFS_APPEND,
 443         }, {
 444                 .name       = "file system(nor)",
 445                 .size       = 0x400000 - 0x40000 - 0x180000 - 0x10000,
 446                 .offset     = MTDPART_OFS_APPEND,
 447         }, {
 448                 .name       = "MAC Address(nor)",
 449                 .size       = MTDPART_SIZ_FULL,
 450                 .offset     = 0x3F0000,
 451                 .mask_flags = MTD_WRITEABLE,
 452         }
 453 };
 454
 455 static struct physmap_flash_data stamp_flash_data = {
 456         .width      = 2,
 457         .parts      = stamp_partitions,
 458         .nr_parts   = ARRAY_SIZE(stamp_partitions),
 459 };
 460
 461 static struct resource stamp_flash_resource = {
 462         .start = 0x20000000,
 463         .end   = 0x203fffff,
 464         .flags = IORESOURCE_MEM,
 465 };
 466
 467 static struct platform_device stamp_flash_device = {
 468         .name          = "physmap-flash",
 469         .id            = 0,
 470         .dev = {
 471                 .platform_data = &stamp_flash_data,
 472         },
 473         .num_resources = 1,
 474         .resource      = &stamp_flash_resource,
 475 };
 476 #endif
 477
 478 #if defined(CONFIG_MTD_M25P80) \
 479         || defined(CONFIG_MTD_M25P80_MODULE)
 480 static struct mtd_partition bfin_spi_flash_partitions[] = {
 481         {
 482                 .name = "bootloader(spi)",
 483                 .size = 0x00040000,
 484                 .offset = 0,
 485                 .mask_flags = MTD_CAP_ROM
 486         }, {
 487                 .name = "linux kernel(spi)",
 488                 .size = 0x180000,
 489                 .offset = MTDPART_OFS_APPEND,
 490         }, {
 491                 .name = "file system(spi)",
 492                 .size = MTDPART_SIZ_FULL,
 493                 .offset = MTDPART_OFS_APPEND,
 494         }
 495 };
 496
 497 static struct flash_platform_data bfin_spi_flash_data = {
 498         .name = "m25p80",
 499         .parts = bfin_spi_flash_partitions,
 500         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 501         /* .type = "m25p64", */
 502 };
 503
 504 /* SPI flash chip (m25p64) */
 505 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 506         .enable_dma = 0,         /* use dma transfer with this chip*/
 507         .bits_per_word = 8,
 508 };
 509 #endif
 510
 511 #if defined(CONFIG_BFIN_SPI_ADC) \
 512         || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 513 /* SPI ADC chip */
 514 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 515         .enable_dma = 1,         /* use dma transfer with this chip*/
 516         .bits_per_word = 16,
 517 };
 518 #endif
 519
 520 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 521         || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 522 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 523         .enable_dma = 0,
 524         .bits_per_word = 16,
 525 };
 526 #endif
 527
 528 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
 529 static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 530         .enable_dma = 0,
 531         .bits_per_word = 16,
 532 };
 533 #endif
 534
 535 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 536 #define MMC_SPI_CARD_DETECT_INT IRQ_PF5
 537
 538 static int bfin_mmc_spi_init(struct device *dev,
 539         irqreturn_t (*detect_int)(int, void *), void *data)
 540 {
 541         return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
 542                 IRQF_TRIGGER_FALLING, "mmc-spi-detect", data);
 543 }
 544
 545 static void bfin_mmc_spi_exit(struct device *dev, void *data)
 546 {
 547         free_irq(MMC_SPI_CARD_DETECT_INT, data);
 548 }
 549
 550 static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
 551         .init = bfin_mmc_spi_init,
 552         .exit = bfin_mmc_spi_exit,
 553         .detect_delay = 100, /* msecs */
 554 };
 555
 556 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 557         .enable_dma = 0,
 558         .bits_per_word = 8,
 559 };
 560 #endif
 561
 562 #if defined(CONFIG_PBX)
 563 static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 564         .ctl_reg        = 0x4, /* send zero */
 565         .enable_dma     = 0,
 566         .bits_per_word  = 8,
 567         .cs_change_per_word = 1,
 568 };
 569 #endif
 570
 571 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 572 #include <linux/spi/ad7877.h>
 573 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
 574         .enable_dma = 0,
 575         .bits_per_word = 16,
 576 };
 577
 578 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 579         .model                  = 7877,
 580         .vref_delay_usecs       = 50,   /* internal, no capacitor */
 581         .x_plate_ohms           = 419,
 582         .y_plate_ohms           = 486,
 583         .pressure_max           = 1000,
 584         .pressure_min           = 0,
 585         .stopacq_polarity       = 1,
 586         .first_conversion_delay = 3,
 587         .acquisition_time       = 1,
 588         .averaging              = 1,
 589         .pen_down_acc_interval  = 1,
 590 };
 591 #endif
 592
 593 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
 594 #include <linux/spi/ad7879.h>
 595 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 596         .model                  = 7879, /* Model = AD7879 */
 597         .x_plate_ohms           = 620,  /* 620 Ohm from the touch datasheet */
 598         .pressure_max           = 10000,
 599         .pressure_min           = 0,
 600         .first_conversion_delay = 3,    /* wait 512us before do a first conversion */
 601         .acquisition_time       = 1,    /* 4us acquisition time per sample */
 602         .median                 = 2,    /* do 8 measurements */
 603         .averaging              = 1,    /* take the average of 4 middle samples */
 604         .pen_down_acc_interval  = 255,  /* 9.4 ms */
 605         .gpio_output            = 1,    /* configure AUX/VBAT/GPIO as GPIO output */
 606         .gpio_default           = 1,    /* During initialization set GPIO = HIGH */
 607 };
 608 #endif
 609
 610 #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
 611 #include <linux/input.h>
 612 #include <linux/spi/adxl34x.h>
 613 static const struct adxl34x_platform_data adxl34x_info = {
 614         .x_axis_offset = 0,
 615         .y_axis_offset = 0,
 616         .z_axis_offset = 0,
 617         .tap_threshold = 0x31,
 618         .tap_duration = 0x10,
 619         .tap_latency = 0x60,
 620         .tap_window = 0xF0,
 621         .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
 622         .act_axis_control = 0xFF,
 623         .activity_threshold = 5,
 624         .inactivity_threshold = 3,
 625         .inactivity_time = 4,
 626         .free_fall_threshold = 0x7,
 627         .free_fall_time = 0x20,
 628         .data_rate = 0x8,
 629         .data_range = ADXL_FULL_RES,
 630
 631         .ev_type = EV_ABS,
 632         .ev_code_x = ABS_X,             /* EV_REL */
 633         .ev_code_y = ABS_Y,             /* EV_REL */
 634         .ev_code_z = ABS_Z,             /* EV_REL */
 635
 636         .ev_code_tap_x = BTN_TOUCH,             /* EV_KEY */
 637         .ev_code_tap_y = BTN_TOUCH,             /* EV_KEY */
 638         .ev_code_tap_z = BTN_TOUCH,             /* EV_KEY */
 639
 640 /*      .ev_code_ff = KEY_F,*/          /* EV_KEY */
 641 /*      .ev_code_act_inactivity = KEY_A,*/      /* EV_KEY */
 642         .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
 643         .fifo_mode = ADXL_FIFO_STREAM,
 644 };
 645 #endif
 646
 647 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 648 static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
 649         .enable_dma = 0,
 650         .bits_per_word = 16,
 651 };
 652 #endif
 653
 654 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 655 static struct bfin5xx_spi_chip spidev_chip_info = {
 656         .enable_dma = 0,
 657         .bits_per_word = 8,
 658 };
 659 #endif
 660
 661 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 662 static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
 663         .enable_dma     = 0,
 664         .bits_per_word  = 8,
 665 };
 666 #endif
 667
 668 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
 669 static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
 670         .enable_dma     = 1,
 671         .bits_per_word  = 8,
 672         .cs_gpio = GPIO_PF10,
 673 };
 674 #endif
 675
 676 #if defined(CONFIG_MTD_DATAFLASH) \
 677         || defined(CONFIG_MTD_DATAFLASH_MODULE)
 678
 679 static struct mtd_partition bfin_spi_dataflash_partitions[] = {
 680         {
 681                 .name = "bootloader(spi)",
 682                 .size = 0x00040000,
 683                 .offset = 0,
 684                 .mask_flags = MTD_CAP_ROM
 685         }, {
 686                 .name = "linux kernel(spi)",
 687                 .size = 0x180000,
 688                 .offset = MTDPART_OFS_APPEND,
 689         }, {
 690                 .name = "file system(spi)",
 691                 .size = MTDPART_SIZ_FULL,
 692                 .offset = MTDPART_OFS_APPEND,
 693         }
 694 };
 695
 696 static struct flash_platform_data bfin_spi_dataflash_data = {
 697         .name = "SPI Dataflash",
 698         .parts = bfin_spi_dataflash_partitions,
 699         .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
 700 };
 701
 702 /* DataFlash chip */
 703 static struct bfin5xx_spi_chip data_flash_chip_info = {
 704         .enable_dma = 0,         /* use dma transfer with this chip*/
 705         .bits_per_word = 8,
 706 };
 707 #endif
 708
 709 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 710 #if defined(CONFIG_MTD_M25P80) \
 711         || defined(CONFIG_MTD_M25P80_MODULE)
 712         {
 713                 /* the modalias must be the same as spi device driver name */
 714                 .modalias = "m25p80", /* Name of spi_driver for this device */
 715                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 716                 .bus_num = 0, /* Framework bus number */
 717                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 718                 .platform_data = &bfin_spi_flash_data,
 719                 .controller_data = &spi_flash_chip_info,
 720                 .mode = SPI_MODE_3,
 721         },
 722 #endif
 723 #if defined(CONFIG_MTD_DATAFLASH) \
 724         || defined(CONFIG_MTD_DATAFLASH_MODULE)
 725         {       /* DataFlash chip */
 726                 .modalias = "mtd_dataflash",
 727                 .max_speed_hz = 33250000,     /* max spi clock (SCK) speed in HZ */
 728                 .bus_num = 0, /* Framework bus number */
 729                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 730                 .platform_data = &bfin_spi_dataflash_data,
 731                 .controller_data = &data_flash_chip_info,
 732                 .mode = SPI_MODE_3,
 733         },
 734 #endif
 735 #if defined(CONFIG_BFIN_SPI_ADC) \
 736         || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 737         {
 738                 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 739                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
 740                 .bus_num = 0, /* Framework bus number */
 741                 .chip_select = 1, /* Framework chip select. */
 742                 .platform_data = NULL, /* No spi_driver specific config */
 743                 .controller_data = &spi_adc_chip_info,
 744         },
 745 #endif
 746
 747 #if defined(CONFIG_SND_BLACKFIN_AD1836) \
 748         || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 749         {
 750                 .modalias = "ad1836-spi",
 751                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 752                 .bus_num = 0,
 753                 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
 754                 .controller_data = &ad1836_spi_chip_info,
 755         },
 756 #endif
 757 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
 758         {
 759                 .modalias = "ad9960-spi",
 760                 .max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
 761                 .bus_num = 0,
 762                 .chip_select = 1,
 763                 .controller_data = &ad9960_spi_chip_info,
 764         },
 765 #endif
 766 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 767         {
 768                 .modalias = "mmc_spi",
 769                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 770                 .bus_num = 0,
 771                 .chip_select = 4,
 772                 .platform_data = &bfin_mmc_spi_pdata,
 773                 .controller_data = &mmc_spi_chip_info,
 774                 .mode = SPI_MODE_3,
 775         },
 776 #endif
 777 #if defined(CONFIG_PBX)
 778         {
 779                 .modalias = "fxs-spi",
 780                 .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
 781                 .bus_num = 0,
 782                 .chip_select = 8 - CONFIG_J11_JUMPER,
 783                 .controller_data = &spi_si3xxx_chip_info,
 784                 .mode = SPI_MODE_3,
 785         },
 786         {
 787                 .modalias = "fxo-spi",
 788                 .max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
 789                 .bus_num = 0,
 790                 .chip_select = 8 - CONFIG_J19_JUMPER,
 791                 .controller_data = &spi_si3xxx_chip_info,
 792                 .mode = SPI_MODE_3,
 793         },
 794 #endif
 795 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 796         {
 797                 .modalias               = "ad7877",
 798                 .platform_data          = &bfin_ad7877_ts_info,
 799                 .irq                    = IRQ_PF6,
 800                 .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
 801                 .bus_num        = 0,
 802                 .chip_select  = 1,
 803                 .controller_data = &spi_ad7877_chip_info,
 804         },
 805 #endif
 806 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 807         {
 808                 .modalias = "ad7879",
 809                 .platform_data = &bfin_ad7879_ts_info,
 810                 .irq = IRQ_PF7,
 811                 .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
 812                 .bus_num = 0,
 813                 .chip_select = 1,
 814                 .controller_data = &spi_ad7879_chip_info,
 815                 .mode = SPI_CPHA | SPI_CPOL,
 816         },
 817 #endif
 818 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 819         {
 820                 .modalias = "spidev",
 821                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 822                 .bus_num = 0,
 823                 .chip_select = 1,
 824                 .controller_data = &spidev_chip_info,
 825         },
 826 #endif
 827 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 828         {
 829                 .modalias = "bfin-lq035q1-spi",
 830                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 831                 .bus_num = 0,
 832                 .chip_select = 2,
 833                 .controller_data = &lq035q1_spi_chip_info,
 834                 .mode = SPI_CPHA | SPI_CPOL,
 835         },
 836 #endif
 837 #if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
 838         {
 839                 .modalias = "enc28j60",
 840                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 841                 .irq = IRQ_PF6,
 842                 .bus_num = 0,
 843                 .chip_select = 0,       /* GPIO controlled SSEL */
 844                 .controller_data = &enc28j60_spi_chip_info,
 845                 .mode = SPI_MODE_0,
 846         },
 847 #endif
 848 };
 849
 850 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 851 /* SPI controller data */
 852 static struct bfin5xx_spi_master bfin_spi0_info = {
 853         .num_chipselect = 8,
 854         .enable_dma = 1,  /* master has the ability to do dma transfer */
 855         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 856 };
 857
 858 /* SPI (0) */
 859 static struct resource bfin_spi0_resource[] = {
 860         [0] = {
 861                 .start = SPI0_REGBASE,
 862                 .end   = SPI0_REGBASE + 0xFF,
 863                 .flags = IORESOURCE_MEM,
 864                 },
 865         [1] = {
 866                 .start = CH_SPI,
 867                 .end   = CH_SPI,
 868                 .flags = IORESOURCE_IRQ,
 869         },
 870 };
 871
 872 static struct platform_device bfin_spi0_device = {
 873         .name = "bfin-spi",
 874         .id = 0, /* Bus number */
 875         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 876         .resource = bfin_spi0_resource,
 877         .dev = {
 878                 .platform_data = &bfin_spi0_info, /* Passed to driver */
 879         },
 880 };
 881 #endif  /* spi master and devices */
 882
 883 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
 884
 885 /* SPORT SPI controller data */
 886 static struct bfin5xx_spi_master bfin_sport_spi0_info = {
 887         .num_chipselect = 1, /* master only supports one device */
 888         .enable_dma = 0,  /* master don't support DMA */
 889         .pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
 890                 P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
 891 };
 892
 893 static struct resource bfin_sport_spi0_resource[] = {
 894         [0] = {
 895                 .start = SPORT0_TCR1,
 896                 .end   = SPORT0_TCR1 + 0xFF,
 897                 .flags = IORESOURCE_MEM,
 898                 },
 899         [1] = {
 900                 .start = IRQ_SPORT0_ERROR,
 901                 .end   = IRQ_SPORT0_ERROR,
 902                 .flags = IORESOURCE_IRQ,
 903                 },
 904 };
 905
 906 static struct platform_device bfin_sport_spi0_device = {
 907         .name = "bfin-sport-spi",
 908         .id = 1, /* Bus number */
 909         .num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
 910         .resource = bfin_sport_spi0_resource,
 911         .dev = {
 912                 .platform_data = &bfin_sport_spi0_info, /* Passed to driver */
 913         },
 914 };
 915
 916 static struct bfin5xx_spi_master bfin_sport_spi1_info = {
 917         .num_chipselect = 1, /* master only supports one device */
 918         .enable_dma = 0,  /* master don't support DMA */
 919         .pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
 920                 P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
 921 };
 922
 923 static struct resource bfin_sport_spi1_resource[] = {
 924         [0] = {
 925                 .start = SPORT1_TCR1,
 926                 .end   = SPORT1_TCR1 + 0xFF,
 927                 .flags = IORESOURCE_MEM,
 928                 },
 929         [1] = {
 930                 .start = IRQ_SPORT1_ERROR,
 931                 .end   = IRQ_SPORT1_ERROR,
 932                 .flags = IORESOURCE_IRQ,
 933                 },
 934 };
 935
 936 static struct platform_device bfin_sport_spi1_device = {
 937         .name = "bfin-sport-spi",
 938         .id = 2, /* Bus number */
 939         .num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
 940         .resource = bfin_sport_spi1_resource,
 941         .dev = {
 942                 .platform_data = &bfin_sport_spi1_info, /* Passed to driver */
 943         },
 944 };
 945
 946 #endif  /* sport spi master and devices */
 947
 948 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
 949 static struct platform_device bfin_fb_device = {
 950         .name = "bf537-lq035",
 951 };
 952 #endif
 953
 954 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
 955 static struct platform_device bfin_fb_adv7393_device = {
 956         .name = "bfin-adv7393",
 957 };
 958 #endif
 959
 960 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 961 #include <asm/bfin-lq035q1.h>
 962
 963 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
 964         .mode =         LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
 965         .use_bl =       0,      /* let something else control the LCD Blacklight */
 966         .gpio_bl =      GPIO_PF7,
 967 };
 968
 969 static struct resource bfin_lq035q1_resources[] = {
 970         {
 971                 .start = IRQ_PPI_ERROR,
 972                 .end = IRQ_PPI_ERROR,
 973                 .flags = IORESOURCE_IRQ,
 974         },
 975 };
 976
 977 static struct platform_device bfin_lq035q1_device = {
 978         .name           = "bfin-lq035q1",
 979         .id             = -1,
 980         .num_resources  = ARRAY_SIZE(bfin_lq035q1_resources),
 981         .resource       = bfin_lq035q1_resources,
 982         .dev            = {
 983                 .platform_data = &bfin_lq035q1_data,
 984         },
 985 };
 986 #endif
 987
 988 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 989 static struct resource bfin_uart_resources[] = {
 990 #ifdef CONFIG_SERIAL_BFIN_UART0
 991         {
 992                 .start = 0xFFC00400,
 993                 .end = 0xFFC004FF,
 994                 .flags = IORESOURCE_MEM,
 995         },
 996 #endif
 997 #ifdef CONFIG_SERIAL_BFIN_UART1
 998         {
 999                 .start = 0xFFC02000,
1000                 .end = 0xFFC020FF,
1001                 .flags = IORESOURCE_MEM,
1002         },
1003 #endif
1004 };
1005
1006 static struct platform_device bfin_uart_device = {
1007         .name = "bfin-uart",
1008         .id = 1,
1009         .num_resources = ARRAY_SIZE(bfin_uart_resources),
1010         .resource = bfin_uart_resources,
1011 };
1012 #endif
1013
1014 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1015 #ifdef CONFIG_BFIN_SIR0
1016 static struct resource bfin_sir0_resources[] = {
1017         {
1018                 .start = 0xFFC00400,
1019                 .end = 0xFFC004FF,
1020                 .flags = IORESOURCE_MEM,
1021         },
1022         {
1023                 .start = IRQ_UART0_RX,
1024                 .end = IRQ_UART0_RX+1,
1025                 .flags = IORESOURCE_IRQ,
1026         },
1027         {
1028                 .start = CH_UART0_RX,
1029                 .end = CH_UART0_RX+1,
1030                 .flags = IORESOURCE_DMA,
1031         },
1032 };
1033
1034 static struct platform_device bfin_sir0_device = {
1035         .name = "bfin_sir",
1036         .id = 0,
1037         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
1038         .resource = bfin_sir0_resources,
1039 };
1040 #endif
1041 #ifdef CONFIG_BFIN_SIR1
1042 static struct resource bfin_sir1_resources[] = {
1043         {
1044                 .start = 0xFFC02000,
1045                 .end = 0xFFC020FF,
1046                 .flags = IORESOURCE_MEM,
1047         },
1048         {
1049                 .start = IRQ_UART1_RX,
1050                 .end = IRQ_UART1_RX+1,
1051                 .flags = IORESOURCE_IRQ,
1052         },
1053         {
1054                 .start = CH_UART1_RX,
1055                 .end = CH_UART1_RX+1,
1056                 .flags = IORESOURCE_DMA,
1057         },
1058 };
1059
1060 static struct platform_device bfin_sir1_device = {
1061         .name = "bfin_sir",
1062         .id = 1,
1063         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
1064         .resource = bfin_sir1_resources,
1065 };
1066 #endif
1067 #endif
1068
1069 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1070 static struct resource bfin_twi0_resource[] = {
1071         [0] = {
1072                 .start = TWI0_REGBASE,
1073                 .end   = TWI0_REGBASE,
1074                 .flags = IORESOURCE_MEM,
1075         },
1076         [1] = {
1077                 .start = IRQ_TWI,
1078                 .end   = IRQ_TWI,
1079                 .flags = IORESOURCE_IRQ,
1080         },
1081 };
1082
1083 static struct platform_device i2c_bfin_twi_device = {
1084         .name = "i2c-bfin-twi",
1085         .id = 0,
1086         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
1087         .resource = bfin_twi0_resource,
1088 };
1089 #endif
1090
1091 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
1092 #include <linux/input.h>
1093 #include <linux/i2c/adp5588_keys.h>
1094 static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
1095         [0]      = KEY_GRAVE,
1096         [1]      = KEY_1,
1097         [2]      = KEY_2,
1098         [3]      = KEY_3,
1099         [4]      = KEY_4,
1100         [5]      = KEY_5,
1101         [6]      = KEY_6,
1102         [7]      = KEY_7,
1103         [8]      = KEY_8,
1104         [9]      = KEY_9,
1105         [10]     = KEY_0,
1106         [11]     = KEY_MINUS,
1107         [12]     = KEY_EQUAL,
1108         [13]     = KEY_BACKSLASH,
1109         [15]     = KEY_KP0,
1110         [16]     = KEY_Q,
1111         [17]     = KEY_W,
1112         [18]     = KEY_E,
1113         [19]     = KEY_R,
1114         [20]     = KEY_T,
1115         [21]     = KEY_Y,
1116         [22]     = KEY_U,
1117         [23]     = KEY_I,
1118         [24]     = KEY_O,
1119         [25]     = KEY_P,
1120         [26]     = KEY_LEFTBRACE,
1121         [27]     = KEY_RIGHTBRACE,
1122         [29]     = KEY_KP1,
1123         [30]     = KEY_KP2,
1124         [31]     = KEY_KP3,
1125         [32]     = KEY_A,
1126         [33]     = KEY_S,
1127         [34]     = KEY_D,
1128         [35]     = KEY_F,
1129         [36]     = KEY_G,
1130         [37]     = KEY_H,
1131         [38]     = KEY_J,
1132         [39]     = KEY_K,
1133         [40]     = KEY_L,
1134         [41]     = KEY_SEMICOLON,
1135         [42]     = KEY_APOSTROPHE,
1136         [43]     = KEY_BACKSLASH,
1137         [45]     = KEY_KP4,
1138         [46]     = KEY_KP5,
1139         [47]     = KEY_KP6,
1140         [48]     = KEY_102ND,
1141         [49]     = KEY_Z,
1142         [50]     = KEY_X,
1143         [51]     = KEY_C,
1144         [52]     = KEY_V,
1145         [53]     = KEY_B,
1146         [54]     = KEY_N,
1147         [55]     = KEY_M,
1148         [56]     = KEY_COMMA,
1149         [57]     = KEY_DOT,
1150         [58]     = KEY_SLASH,
1151         [60]     = KEY_KPDOT,
1152         [61]     = KEY_KP7,
1153         [62]     = KEY_KP8,
1154         [63]     = KEY_KP9,
1155         [64]     = KEY_SPACE,
1156         [65]     = KEY_BACKSPACE,
1157         [66]     = KEY_TAB,
1158         [67]     = KEY_KPENTER,
1159         [68]     = KEY_ENTER,
1160         [69]     = KEY_ESC,
1161         [70]     = KEY_DELETE,
1162         [74]     = KEY_KPMINUS,
1163         [76]     = KEY_UP,
1164         [77]     = KEY_DOWN,
1165         [78]     = KEY_RIGHT,
1166         [79]     = KEY_LEFT,
1167 };
1168
1169 static struct adp5588_kpad_platform_data adp5588_kpad_data = {
1170         .rows           = 8,
1171         .cols           = 10,
1172         .keymap         = adp5588_keymap,
1173         .keymapsize     = ARRAY_SIZE(adp5588_keymap),
1174         .repeat         = 0,
1175 };
1176 #endif
1177
1178 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
1179 #include <linux/mfd/adp5520.h>
1180
1181         /*
1182          *  ADP5520/5501 Backlight Data
1183          */
1184
1185 static struct adp5520_backlight_platfrom_data adp5520_backlight_data = {
1186         .fade_in                = FADE_T_1200ms,
1187         .fade_out               = FADE_T_1200ms,
1188         .fade_led_law           = BL_LAW_LINEAR,
1189         .en_ambl_sens           = 1,
1190         .abml_filt              = BL_AMBL_FILT_640ms,
1191         .l1_daylight_max        = BL_CUR_mA(15),
1192         .l1_daylight_dim        = BL_CUR_mA(0),
1193         .l2_office_max          = BL_CUR_mA(7),
1194         .l2_office_dim          = BL_CUR_mA(0),
1195         .l3_dark_max            = BL_CUR_mA(3),
1196         .l3_dark_dim            = BL_CUR_mA(0),
1197         .l2_trip                = L2_COMP_CURR_uA(700),
1198         .l2_hyst                = L2_COMP_CURR_uA(50),
1199         .l3_trip                = L3_COMP_CURR_uA(80),
1200         .l3_hyst                = L3_COMP_CURR_uA(20),
1201 };
1202
1203         /*
1204          *  ADP5520/5501 LEDs Data
1205          */
1206
1207 #include <linux/leds.h>
1208
1209 static struct led_info adp5520_leds[] = {
1210         {
1211                 .name = "adp5520-led1",
1212                 .default_trigger = "none",
1213                 .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | LED_OFFT_600ms,
1214         },
1215 #ifdef ADP5520_EN_ALL_LEDS
1216         {
1217                 .name = "adp5520-led2",
1218                 .default_trigger = "none",
1219                 .flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1,
1220         },
1221         {
1222                 .name = "adp5520-led3",
1223                 .default_trigger = "none",
1224                 .flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2,
1225         },
1226 #endif
1227 };
1228
1229 static struct adp5520_leds_platfrom_data adp5520_leds_data = {
1230         .num_leds = ARRAY_SIZE(adp5520_leds),
1231         .leds = adp5520_leds,
1232         .fade_in = FADE_T_600ms,
1233         .fade_out = FADE_T_600ms,
1234         .led_on_time = LED_ONT_600ms,
1235 };
1236
1237         /*
1238          *  ADP5520 GPIO Data
1239          */
1240
1241 static struct adp5520_gpio_platfrom_data adp5520_gpio_data = {
1242         .gpio_start = 50,
1243         .gpio_en_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
1244         .gpio_pullup_mask = GPIO_C1 | GPIO_C2 | GPIO_R2,
1245 };
1246
1247         /*
1248          *  ADP5520 Keypad Data
1249          */
1250
1251 #include <linux/input.h>
1252 static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
1253         [KEY(0, 0)]     = KEY_GRAVE,
1254         [KEY(0, 1)]     = KEY_1,
1255         [KEY(0, 2)]     = KEY_2,
1256         [KEY(0, 3)]     = KEY_3,
1257         [KEY(1, 0)]     = KEY_4,
1258         [KEY(1, 1)]     = KEY_5,
1259         [KEY(1, 2)]     = KEY_6,
1260         [KEY(1, 3)]     = KEY_7,
1261         [KEY(2, 0)]     = KEY_8,
1262         [KEY(2, 1)]     = KEY_9,
1263         [KEY(2, 2)]     = KEY_0,
1264         [KEY(2, 3)]     = KEY_MINUS,
1265         [KEY(3, 0)]     = KEY_EQUAL,
1266         [KEY(3, 1)]     = KEY_BACKSLASH,
1267         [KEY(3, 2)]     = KEY_BACKSPACE,
1268         [KEY(3, 3)]     = KEY_ENTER,
1269 };
1270
1271 static struct adp5520_keys_platfrom_data adp5520_keys_data = {
1272         .rows_en_mask   = ROW_R3 | ROW_R2 | ROW_R1 | ROW_R0,
1273         .cols_en_mask   = COL_C3 | COL_C2 | COL_C1 | COL_C0,
1274         .keymap         = adp5520_keymap,
1275         .keymapsize     = ARRAY_SIZE(adp5520_keymap),
1276         .repeat         = 0,
1277 };
1278
1279         /*
1280          *  ADP5520/5501 Multifuction Device Init Data
1281          */
1282
1283 static struct adp5520_subdev_info adp5520_subdevs[] = {
1284         {
1285                 .name = "adp5520-backlight",
1286                 .id = ID_ADP5520,
1287                 .platform_data = &adp5520_backlight_data,
1288         },
1289         {
1290                 .name = "adp5520-led",
1291                 .id = ID_ADP5520,
1292                 .platform_data = &adp5520_leds_data,
1293         },
1294         {
1295                 .name = "adp5520-gpio",
1296                 .id = ID_ADP5520,
1297                 .platform_data = &adp5520_gpio_data,
1298         },
1299         {
1300                 .name = "adp5520-keys",
1301                 .id = ID_ADP5520,
1302                 .platform_data = &adp5520_keys_data,
1303         },
1304 };
1305
1306 static struct adp5520_platform_data adp5520_pdev_data = {
1307         .num_subdevs = ARRAY_SIZE(adp5520_subdevs),
1308         .subdevs = adp5520_subdevs,
1309 };
1310
1311 #endif
1312
1313 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
1314 #if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE)
1315         {
1316                 I2C_BOARD_INFO("ad7142_joystick", 0x2C),
1317                 .irq = IRQ_PF5,
1318         },
1319 #endif
1320 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
1321         {
1322                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
1323         },
1324 #endif
1325 #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
1326         {
1327                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
1328                 .irq = IRQ_PG6,
1329         },
1330 #endif
1331 #if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
1332         {
1333                 I2C_BOARD_INFO("ad7879", 0x2F),
1334                 .irq = IRQ_PG5,
1335                 .platform_data = (void *)&bfin_ad7879_ts_info,
1336         },
1337 #endif
1338 #if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
1339         {
1340                 I2C_BOARD_INFO("adp5588-keys", 0x34),
1341                 .irq = IRQ_PG0,
1342                 .platform_data = (void *)&adp5588_kpad_data,
1343         },
1344 #endif
1345 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
1346         {
1347                 I2C_BOARD_INFO("pmic-adp5520", 0x32),
1348                 .irq = IRQ_PG0,
1349                 .platform_data = (void *)&adp5520_pdev_data,
1350         },
1351 #endif
1352 #if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
1353         {
1354                 I2C_BOARD_INFO("adxl34x", 0x53),
1355                 .irq = IRQ_PG3,
1356                 .platform_data = (void *)&adxl34x_info,
1357         },
1358 #endif
1359 };
1360
1361 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1362 static struct platform_device bfin_sport0_uart_device = {
1363         .name = "bfin-sport-uart",
1364         .id = 0,
1365 };
1366
1367 static struct platform_device bfin_sport1_uart_device = {
1368         .name = "bfin-sport-uart",
1369         .id = 1,
1370 };
1371 #endif
1372
1373 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
1374 #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
1375 /* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */
1376
1377 #ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE
1378 #define PATA_INT        IRQ_PF5
1379 static struct pata_platform_info bfin_pata_platform_data = {
1380         .ioport_shift = 1,
1381         .irq_flags = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
1382 };
1383
1384 static struct resource bfin_pata_resources[] = {
1385         {
1386                 .start = 0x20314020,
1387                 .end = 0x2031403F,
1388                 .flags = IORESOURCE_MEM,
1389         },
1390         {
1391                 .start = 0x2031401C,
1392                 .end = 0x2031401F,
1393                 .flags = IORESOURCE_MEM,
1394         },
1395         {
1396                 .start = PATA_INT,
1397                 .end = PATA_INT,
1398                 .flags = IORESOURCE_IRQ,
1399         },
1400 };
1401 #elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE)
1402 static struct pata_platform_info bfin_pata_platform_data = {
1403         .ioport_shift = 0,
1404 };
1405 /* CompactFlash Storage Card Memory Mapped Adressing
1406  * /REG = A11 = 1
1407  */
1408 static struct resource bfin_pata_resources[] = {
1409         {
1410                 .start = 0x20211800,
1411                 .end = 0x20211807,
1412                 .flags = IORESOURCE_MEM,
1413         },
1414         {
1415                 .start = 0x2021180E,    /* Device Ctl */
1416                 .end = 0x2021180E,
1417                 .flags = IORESOURCE_MEM,
1418         },
1419 };
1420 #endif
1421
1422 static struct platform_device bfin_pata_device = {
1423         .name = "pata_platform",
1424         .id = -1,
1425         .num_resources = ARRAY_SIZE(bfin_pata_resources),
1426         .resource = bfin_pata_resources,
1427         .dev = {
1428                 .platform_data = &bfin_pata_platform_data,
1429         }
1430 };
1431 #endif
1432
1433 static const unsigned int cclk_vlev_datasheet[] =
1434 {
1435         VRPAIR(VLEV_085, 250000000),
1436         VRPAIR(VLEV_090, 376000000),
1437         VRPAIR(VLEV_095, 426000000),
1438         VRPAIR(VLEV_100, 426000000),
1439         VRPAIR(VLEV_105, 476000000),
1440         VRPAIR(VLEV_110, 476000000),
1441         VRPAIR(VLEV_115, 476000000),
1442         VRPAIR(VLEV_120, 500000000),
1443         VRPAIR(VLEV_125, 533000000),
1444         VRPAIR(VLEV_130, 600000000),
1445 };
1446
1447 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
1448         .tuple_tab = cclk_vlev_datasheet,
1449         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
1450         .vr_settling_time = 25 /* us */,
1451 };
1452
1453 static struct platform_device bfin_dpmc = {
1454         .name = "bfin dpmc",
1455         .dev = {
1456                 .platform_data = &bfin_dmpc_vreg_data,
1457         },
1458 };
1459
1460 static struct platform_device *stamp_devices[] __initdata = {
1461
1462         &bfin_dpmc,
1463
1464 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
1465         &bfin_pcmcia_cf_device,
1466 #endif
1467
1468 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
1469         &rtc_device,
1470 #endif
1471
1472 #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
1473         &sl811_hcd_device,
1474 #endif
1475
1476 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
1477         &isp1362_hcd_device,
1478 #endif
1479
1480 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
1481         &bfin_isp1760_device,
1482 #endif
1483
1484 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
1485         &smc91x_device,
1486 #endif
1487
1488 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
1489         &dm9000_device,
1490 #endif
1491
1492 #if defined(CONFIG_AX88180) || defined(CONFIG_AX88180_MODULE)
1493         &ax88180_device,
1494 #endif
1495
1496 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
1497         &bfin_mii_bus,
1498         &bfin_mac_device,
1499 #endif
1500
1501 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
1502         &net2272_bfin_device,
1503 #endif
1504
1505 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1506         &bfin_spi0_device,
1507 #endif
1508
1509 #if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
1510         &bfin_sport_spi0_device,
1511         &bfin_sport_spi1_device,
1512 #endif
1513
1514 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
1515         &bfin_fb_device,
1516 #endif
1517
1518 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1519         &bfin_lq035q1_device,
1520 #endif
1521
1522 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
1523         &bfin_fb_adv7393_device,
1524 #endif
1525
1526 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1527         &bfin_uart_device,
1528 #endif
1529
1530 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1531 #ifdef CONFIG_BFIN_SIR0
1532         &bfin_sir0_device,
1533 #endif
1534 #ifdef CONFIG_BFIN_SIR1
1535         &bfin_sir1_device,
1536 #endif
1537 #endif
1538
1539 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1540         &i2c_bfin_twi_device,
1541 #endif
1542
1543 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1544         &bfin_sport0_uart_device,
1545         &bfin_sport1_uart_device,
1546 #endif
1547
1548 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
1549         &bfin_pata_device,
1550 #endif
1551
1552 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1553         &bfin_device_gpiokeys,
1554 #endif
1555
1556         &bfin_gpios_device,
1557
1558 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
1559         &bfin_async_nand_device,
1560 #endif
1561
1562 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
1563         &stamp_flash_device,
1564 #endif
1565 };
1566
1567 static int __init stamp_init(void)
1568 {
1569         printk(KERN_INFO "%s(): registering device resources\n", __func__);
1570         i2c_register_board_info(0, bfin_i2c_board_info,
1571                                 ARRAY_SIZE(bfin_i2c_board_info));
1572         bfin_plat_nand_init();
1573         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
1574         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
1575
1576 #if (defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)) \
1577          && defined(PATA_INT)
1578         irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
1579 #endif
1580
1581         return 0;
1582 }
1583
1584 arch_initcall(stamp_init);
1585
1586 void native_machine_restart(char *cmd)
1587 {
1588         /* workaround reboot hang when booting from SPI */
1589         if ((bfin_read_SYSCR() & 0x7) == 0x3)
1590                 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
1591 }
1592
1593 /*
1594  * Currently the MAC address is saved in Flash by U-Boot
1595  */
1596 #define FLASH_MAC       0x203f0000
1597 void bfin_get_ether_addr(char *addr)
1598 {
1599         *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
1600         *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
1601 }
1602 EXPORT_SYMBOL(bfin_get_ether_addr);