Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
[pandora-kernel.git] / arch / blackfin / mach-bf537 / boards / minotaur.c
1 /*
2  * Copyright 2004-2009 Analog Devices Inc.
3  *           2008-2009 Cambridge Signal Processing
4  *                2005 National ICT Australia (NICTA)
5  *                      Aidan Williams <aidan@nicta.com.au>
6  *
7  * Licensed under the GPL-2 or later.
8  */
9
10 #include <linux/device.h>
11 #include <linux/platform_device.h>
12 #include <linux/mtd/mtd.h>
13 #include <linux/mtd/partitions.h>
14 #include <linux/spi/spi.h>
15 #include <linux/spi/flash.h>
16 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
17 #include <linux/usb/isp1362.h>
18 #endif
19 #include <linux/ata_platform.h>
20 #include <linux/irq.h>
21 #include <linux/interrupt.h>
22 #include <linux/usb/sl811.h>
23 #include <asm/dma.h>
24 #include <asm/bfin5xx_spi.h>
25 #include <asm/reboot.h>
26 #include <linux/spi/ad7877.h>
27
28 /*
29  * Name the Board for the /proc/cpuinfo
30  */
31 char *bfin_board_name = "CamSig Minotaur BF537";
32
33 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
34 static struct resource bfin_pcmcia_cf_resources[] = {
35         {
36                 .start = 0x20310000, /* IO PORT */
37                 .end = 0x20312000,
38                 .flags = IORESOURCE_MEM,
39         }, {
40                 .start = 0x20311000, /* Attribute Memory */
41                 .end = 0x20311FFF,
42                 .flags = IORESOURCE_MEM,
43         }, {
44                 .start = IRQ_PF4,
45                 .end = IRQ_PF4,
46                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
47         }, {
48                 .start = IRQ_PF6, /* Card Detect PF6 */
49                 .end = IRQ_PF6,
50                 .flags = IORESOURCE_IRQ,
51         },
52 };
53
54 static struct platform_device bfin_pcmcia_cf_device = {
55         .name = "bfin_cf_pcmcia",
56         .id = -1,
57         .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
58         .resource = bfin_pcmcia_cf_resources,
59 };
60 #endif
61
62 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
63 static struct platform_device rtc_device = {
64         .name = "rtc-bfin",
65         .id   = -1,
66 };
67 #endif
68
69 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
70 static struct platform_device bfin_mii_bus = {
71         .name = "bfin_mii_bus",
72 };
73
74 static struct platform_device bfin_mac_device = {
75         .name = "bfin_mac",
76         .dev.platform_data = &bfin_mii_bus,
77 };
78 #endif
79
80 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
81 static struct resource net2272_bfin_resources[] = {
82         {
83                 .start = 0x20300000,
84                 .end = 0x20300000 + 0x100,
85                 .flags = IORESOURCE_MEM,
86         }, {
87                 .start = IRQ_PF7,
88                 .end = IRQ_PF7,
89                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
90         },
91 };
92
93 static struct platform_device net2272_bfin_device = {
94         .name = "net2272",
95         .id = -1,
96         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
97         .resource = net2272_bfin_resources,
98 };
99 #endif
100
101 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
102 /* all SPI peripherals info goes here */
103
104 #if defined(CONFIG_MTD_M25P80) \
105         || defined(CONFIG_MTD_M25P80_MODULE)
106
107 /* Partition sizes */
108 #define FLASH_SIZE       0x00400000
109 #define PSIZE_UBOOT      0x00030000
110 #define PSIZE_INITRAMFS  0x00240000
111
112 static struct mtd_partition bfin_spi_flash_partitions[] = {
113         {
114                 .name       = "bootloader(spi)",
115                 .size       = PSIZE_UBOOT,
116                 .offset     = 0x000000,
117                 .mask_flags = MTD_CAP_ROM
118         }, {
119                 .name       = "initramfs(spi)",
120                 .size       = PSIZE_INITRAMFS,
121                 .offset     = PSIZE_UBOOT
122         }, {
123                 .name       = "opt(spi)",
124                 .size       = FLASH_SIZE - (PSIZE_UBOOT + PSIZE_INITRAMFS),
125                 .offset     = PSIZE_UBOOT + PSIZE_INITRAMFS,
126         }
127 };
128
129 static struct flash_platform_data bfin_spi_flash_data = {
130         .name = "m25p80",
131         .parts = bfin_spi_flash_partitions,
132         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
133         .type = "m25p64",
134 };
135
136 /* SPI flash chip (m25p64) */
137 static struct bfin5xx_spi_chip spi_flash_chip_info = {
138         .enable_dma = 0,         /* use dma transfer with this chip*/
139         .bits_per_word = 8,
140 };
141 #endif
142
143 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
144 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
145         .enable_dma = 0,
146         .bits_per_word = 8,
147 };
148 #endif
149
150 static struct spi_board_info bfin_spi_board_info[] __initdata = {
151 #if defined(CONFIG_MTD_M25P80) \
152         || defined(CONFIG_MTD_M25P80_MODULE)
153         {
154                 /* the modalias must be the same as spi device driver name */
155                 .modalias = "m25p80", /* Name of spi_driver for this device */
156                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
157                 .bus_num = 0, /* Framework bus number */
158                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
159                 .platform_data = &bfin_spi_flash_data,
160                 .controller_data = &spi_flash_chip_info,
161                 .mode = SPI_MODE_3,
162         },
163 #endif
164
165 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
166         {
167                 .modalias = "mmc_spi",
168                 .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
169                 .bus_num = 0,
170                 .chip_select = 5,
171                 .controller_data = &mmc_spi_chip_info,
172                 .mode = SPI_MODE_3,
173         },
174 #endif
175 };
176
177 /* SPI controller data */
178 static struct bfin5xx_spi_master bfin_spi0_info = {
179         .num_chipselect = 8,
180         .enable_dma = 1,  /* master has the ability to do dma transfer */
181 };
182
183 /* SPI (0) */
184 static struct resource bfin_spi0_resource[] = {
185         [0] = {
186                 .start = SPI0_REGBASE,
187                 .end   = SPI0_REGBASE + 0xFF,
188                 .flags = IORESOURCE_MEM,
189                 },
190         [1] = {
191                 .start = CH_SPI,
192                 .end   = CH_SPI,
193                 .flags = IORESOURCE_DMA,
194         },
195         [2] = {
196                 .start = IRQ_SPI,
197                 .end   = IRQ_SPI,
198                 .flags = IORESOURCE_IRQ,
199         },
200 };
201
202 static struct platform_device bfin_spi0_device = {
203         .name = "bfin-spi",
204         .id = 0, /* Bus number */
205         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
206         .resource = bfin_spi0_resource,
207         .dev = {
208                 .platform_data = &bfin_spi0_info, /* Passed to driver */
209         },
210 };
211 #endif  /* spi master and devices */
212
213 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
214 #ifdef CONFIG_SERIAL_BFIN_UART0
215 static struct resource bfin_uart0_resources[] = {
216         {
217                 .start = UART0_THR,
218                 .end = UART0_GCTL+2,
219                 .flags = IORESOURCE_MEM,
220         },
221         {
222                 .start = IRQ_UART0_RX,
223                 .end = IRQ_UART0_RX+1,
224                 .flags = IORESOURCE_IRQ,
225         },
226         {
227                 .start = IRQ_UART0_ERROR,
228                 .end = IRQ_UART0_ERROR,
229                 .flags = IORESOURCE_IRQ,
230         },
231         {
232                 .start = CH_UART0_TX,
233                 .end = CH_UART0_TX,
234                 .flags = IORESOURCE_DMA,
235         },
236         {
237                 .start = CH_UART0_RX,
238                 .end = CH_UART0_RX,
239                 .flags = IORESOURCE_DMA,
240         },
241 };
242
243 unsigned short bfin_uart0_peripherals[] = {
244         P_UART0_TX, P_UART0_RX, 0
245 };
246
247 static struct platform_device bfin_uart0_device = {
248         .name = "bfin-uart",
249         .id = 0,
250         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
251         .resource = bfin_uart0_resources,
252         .dev = {
253                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
254         },
255 };
256 #endif
257 #ifdef CONFIG_SERIAL_BFIN_UART1
258 static struct resource bfin_uart1_resources[] = {
259         {
260                 .start = UART1_THR,
261                 .end = UART1_GCTL+2,
262                 .flags = IORESOURCE_MEM,
263         },
264         {
265                 .start = IRQ_UART1_RX,
266                 .end = IRQ_UART1_RX+1,
267                 .flags = IORESOURCE_IRQ,
268         },
269         {
270                 .start = IRQ_UART1_ERROR,
271                 .end = IRQ_UART1_ERROR,
272                 .flags = IORESOURCE_IRQ,
273         },
274         {
275                 .start = CH_UART1_TX,
276                 .end = CH_UART1_TX,
277                 .flags = IORESOURCE_DMA,
278         },
279         {
280                 .start = CH_UART1_RX,
281                 .end = CH_UART1_RX,
282                 .flags = IORESOURCE_DMA,
283         },
284 };
285
286 unsigned short bfin_uart1_peripherals[] = {
287         P_UART1_TX, P_UART1_RX, 0
288 };
289
290 static struct platform_device bfin_uart1_device = {
291         .name = "bfin-uart",
292         .id = 1,
293         .num_resources = ARRAY_SIZE(bfin_uart1_resources),
294         .resource = bfin_uart1_resources,
295         .dev = {
296                 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
297         },
298 };
299 #endif
300 #endif
301
302 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
303 #ifdef CONFIG_BFIN_SIR0
304 static struct resource bfin_sir0_resources[] = {
305         {
306                 .start = 0xFFC00400,
307                 .end = 0xFFC004FF,
308                 .flags = IORESOURCE_MEM,
309         },
310         {
311                 .start = IRQ_UART0_RX,
312                 .end = IRQ_UART0_RX+1,
313                 .flags = IORESOURCE_IRQ,
314         },
315         {
316                 .start = CH_UART0_RX,
317                 .end = CH_UART0_RX+1,
318                 .flags = IORESOURCE_DMA,
319         },
320 };
321
322 static struct platform_device bfin_sir0_device = {
323         .name = "bfin_sir",
324         .id = 0,
325         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
326         .resource = bfin_sir0_resources,
327 };
328 #endif
329 #ifdef CONFIG_BFIN_SIR1
330 static struct resource bfin_sir1_resources[] = {
331         {
332                 .start = 0xFFC02000,
333                 .end = 0xFFC020FF,
334                 .flags = IORESOURCE_MEM,
335         },
336         {
337                 .start = IRQ_UART1_RX,
338                 .end = IRQ_UART1_RX+1,
339                 .flags = IORESOURCE_IRQ,
340         },
341         {
342                 .start = CH_UART1_RX,
343                 .end = CH_UART1_RX+1,
344                 .flags = IORESOURCE_DMA,
345         },
346 };
347
348 static struct platform_device bfin_sir1_device = {
349         .name = "bfin_sir",
350         .id = 1,
351         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
352         .resource = bfin_sir1_resources,
353 };
354 #endif
355 #endif
356
357 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
358 static struct resource bfin_twi0_resource[] = {
359         [0] = {
360                 .start = TWI0_REGBASE,
361                 .end   = TWI0_REGBASE + 0xFF,
362                 .flags = IORESOURCE_MEM,
363         },
364         [1] = {
365                 .start = IRQ_TWI,
366                 .end   = IRQ_TWI,
367                 .flags = IORESOURCE_IRQ,
368         },
369 };
370
371 static struct platform_device i2c_bfin_twi_device = {
372         .name = "i2c-bfin-twi",
373         .id = 0,
374         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
375         .resource = bfin_twi0_resource,
376 };
377 #endif
378
379 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
380 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
381 static struct resource bfin_sport0_uart_resources[] = {
382         {
383                 .start = SPORT0_TCR1,
384                 .end = SPORT0_MRCS3+4,
385                 .flags = IORESOURCE_MEM,
386         },
387         {
388                 .start = IRQ_SPORT0_RX,
389                 .end = IRQ_SPORT0_RX+1,
390                 .flags = IORESOURCE_IRQ,
391         },
392         {
393                 .start = IRQ_SPORT0_ERROR,
394                 .end = IRQ_SPORT0_ERROR,
395                 .flags = IORESOURCE_IRQ,
396         },
397 };
398
399 unsigned short bfin_sport0_peripherals[] = {
400         P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
401         P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0
402 };
403
404 static struct platform_device bfin_sport0_uart_device = {
405         .name = "bfin-sport-uart",
406         .id = 0,
407         .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
408         .resource = bfin_sport0_uart_resources,
409         .dev = {
410                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
411         },
412 };
413 #endif
414 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
415 static struct resource bfin_sport1_uart_resources[] = {
416         {
417                 .start = SPORT1_TCR1,
418                 .end = SPORT1_MRCS3+4,
419                 .flags = IORESOURCE_MEM,
420         },
421         {
422                 .start = IRQ_SPORT1_RX,
423                 .end = IRQ_SPORT1_RX+1,
424                 .flags = IORESOURCE_IRQ,
425         },
426         {
427                 .start = IRQ_SPORT1_ERROR,
428                 .end = IRQ_SPORT1_ERROR,
429                 .flags = IORESOURCE_IRQ,
430         },
431 };
432
433 unsigned short bfin_sport1_peripherals[] = {
434         P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
435         P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_DRSEC, P_SPORT1_DTSEC, 0
436 };
437
438 static struct platform_device bfin_sport1_uart_device = {
439         .name = "bfin-sport-uart",
440         .id = 1,
441         .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
442         .resource = bfin_sport1_uart_resources,
443         .dev = {
444                 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
445         },
446 };
447 #endif
448 #endif
449
450 static struct platform_device *minotaur_devices[] __initdata = {
451 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
452         &bfin_pcmcia_cf_device,
453 #endif
454
455 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
456         &rtc_device,
457 #endif
458
459 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
460         &bfin_mii_bus,
461         &bfin_mac_device,
462 #endif
463
464 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
465         &net2272_bfin_device,
466 #endif
467
468 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
469         &bfin_spi0_device,
470 #endif
471
472 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
473 #ifdef CONFIG_SERIAL_BFIN_UART0
474         &bfin_uart0_device,
475 #endif
476 #ifdef CONFIG_SERIAL_BFIN_UART1
477         &bfin_uart1_device,
478 #endif
479 #endif
480
481 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
482 #ifdef CONFIG_BFIN_SIR0
483         &bfin_sir0_device,
484 #endif
485 #ifdef CONFIG_BFIN_SIR1
486         &bfin_sir1_device,
487 #endif
488 #endif
489
490 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
491         &i2c_bfin_twi_device,
492 #endif
493
494 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
495 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
496         &bfin_sport0_uart_device,
497 #endif
498 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
499         &bfin_sport1_uart_device,
500 #endif
501 #endif
502
503 };
504
505 static int __init minotaur_init(void)
506 {
507         printk(KERN_INFO "%s(): registering device resources\n", __func__);
508         platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices));
509 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
510         spi_register_board_info(bfin_spi_board_info,
511                                 ARRAY_SIZE(bfin_spi_board_info));
512 #endif
513
514         return 0;
515 }
516
517 arch_initcall(minotaur_init);
518
519 static struct platform_device *minotaur_early_devices[] __initdata = {
520 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
521 #ifdef CONFIG_SERIAL_BFIN_UART0
522         &bfin_uart0_device,
523 #endif
524 #ifdef CONFIG_SERIAL_BFIN_UART1
525         &bfin_uart1_device,
526 #endif
527 #endif
528
529 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
530 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
531         &bfin_sport0_uart_device,
532 #endif
533 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
534         &bfin_sport1_uart_device,
535 #endif
536 #endif
537 };
538
539 void __init native_machine_early_platform_add_devices(void)
540 {
541         printk(KERN_INFO "register early platform devices\n");
542         early_platform_add_devices(minotaur_early_devices,
543                 ARRAY_SIZE(minotaur_early_devices));
544 }
545
546 void native_machine_restart(char *cmd)
547 {
548         /* workaround reboot hang when booting from SPI */
549         if ((bfin_read_SYSCR() & 0x7) == 0x3)
550                 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
551 }