arch/blackfin/mach-bf527/boards/ezkit.c

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *                2005 National ICT Australia (NICTA)
   4  *                      Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Licensed under the GPL-2 or later.
   7  */
   8
   9 #include <linux/device.h>
  10 #include <linux/platform_device.h>
  11 #include <linux/mtd/mtd.h>
  12 #include <linux/mtd/partitions.h>
  13 #include <linux/mtd/physmap.h>
  14 #include <linux/spi/spi.h>
  15 #include <linux/spi/flash.h>
  16 #include <linux/i2c.h>
  17 #include <linux/irq.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/usb/musb.h>
  20 #include <linux/leds.h>
  21 #include <linux/input.h>
  22 #include <asm/dma.h>
  23 #include <asm/bfin5xx_spi.h>
  24 #include <asm/reboot.h>
  25 #include <asm/nand.h>
  26 #include <asm/portmux.h>
  27 #include <asm/dpmc.h>
  28 #include <linux/spi/ad7877.h>
  29 #include <asm/bfin_sport.h>
  30
  31 /*
  32  * Name the Board for the /proc/cpuinfo
  33  */
  34 #ifdef CONFIG_BFIN527_EZKIT_V2
  35 const char bfin_board_name[] = "ADI BF527-EZKIT V2";
  36 #else
  37 const char bfin_board_name[] = "ADI BF527-EZKIT";
  38 #endif
  39
  40 /*
  41  *  Driver needs to know address, irq and flag pin.
  42  */
  43
  44 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
  45 #include <linux/usb/isp1760.h>
  46 static struct resource bfin_isp1760_resources[] = {
  47         [0] = {
  48                 .start  = 0x203C0000,
  49                 .end    = 0x203C0000 + 0x000fffff,
  50                 .flags  = IORESOURCE_MEM,
  51         },
  52         [1] = {
  53                 .start  = IRQ_PF7,
  54                 .end    = IRQ_PF7,
  55                 .flags  = IORESOURCE_IRQ,
  56         },
  57 };
  58
  59 static struct isp1760_platform_data isp1760_priv = {
  60         .is_isp1761 = 0,
  61         .bus_width_16 = 1,
  62         .port1_otg = 0,
  63         .analog_oc = 0,
  64         .dack_polarity_high = 0,
  65         .dreq_polarity_high = 0,
  66 };
  67
  68 static struct platform_device bfin_isp1760_device = {
  69         .name           = "isp1760",
  70         .id             = 0,
  71         .dev = {
  72                 .platform_data = &isp1760_priv,
  73         },
  74         .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
  75         .resource       = bfin_isp1760_resources,
  76 };
  77 #endif
  78
  79 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
  80 static struct resource musb_resources[] = {
  81         [0] = {
  82                 .start  = 0xffc03800,
  83                 .end    = 0xffc03cff,
  84                 .flags  = IORESOURCE_MEM,
  85         },
  86         [1] = { /* general IRQ */
  87                 .start  = IRQ_USB_INT0,
  88                 .end    = IRQ_USB_INT0,
  89                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
  90                 .name   = "mc"
  91         },
  92         [2] = { /* DMA IRQ */
  93                 .start  = IRQ_USB_DMA,
  94                 .end    = IRQ_USB_DMA,
  95                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
  96                 .name   = "dma"
  97         },
  98 };
  99
 100 static struct musb_hdrc_config musb_config = {
 101         .multipoint     = 0,
 102         .dyn_fifo       = 0,
 103         .soft_con       = 1,
 104         .dma            = 1,
 105         .num_eps        = 8,
 106         .dma_channels   = 8,
 107         .gpio_vrsel     = GPIO_PG13,
 108         /* Some custom boards need to be active low, just set it to "0"
 109          * if it is the case.
 110          */
 111         .gpio_vrsel_active      = 1,
 112         .clkin          = 24,           /* musb CLKIN in MHZ */
 113 };
 114
 115 static struct musb_hdrc_platform_data musb_plat = {
 116 #if defined(CONFIG_USB_MUSB_OTG)
 117         .mode           = MUSB_OTG,
 118 #elif defined(CONFIG_USB_MUSB_HDRC_HCD)
 119         .mode           = MUSB_HOST,
 120 #elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
 121         .mode           = MUSB_PERIPHERAL,
 122 #endif
 123         .config         = &musb_config,
 124 };
 125
 126 static u64 musb_dmamask = ~(u32)0;
 127
 128 static struct platform_device musb_device = {
 129         .name           = "musb-blackfin",
 130         .id             = 0,
 131         .dev = {
 132                 .dma_mask               = &musb_dmamask,
 133                 .coherent_dma_mask      = 0xffffffff,
 134                 .platform_data          = &musb_plat,
 135         },
 136         .num_resources  = ARRAY_SIZE(musb_resources),
 137         .resource       = musb_resources,
 138 };
 139 #endif
 140
 141 #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
 142
 143 static struct resource bf52x_t350mcqb_resources[] = {
 144         {
 145                 .start = IRQ_PPI_ERROR,
 146                 .end = IRQ_PPI_ERROR,
 147                 .flags = IORESOURCE_IRQ,
 148         },
 149 };
 150
 151 static struct platform_device bf52x_t350mcqb_device = {
 152         .name           = "bfin-t350mcqb",
 153         .id             = -1,
 154         .num_resources  = ARRAY_SIZE(bf52x_t350mcqb_resources),
 155         .resource       = bf52x_t350mcqb_resources,
 156 };
 157 #endif
 158
 159 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 160 #include <asm/bfin-lq035q1.h>
 161
 162 static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
 163         .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
 164         .ppi_mode = USE_RGB565_8_BIT_PPI,
 165 };
 166
 167 static struct resource bfin_lq035q1_resources[] = {
 168         {
 169                 .start = IRQ_PPI_ERROR,
 170                 .end = IRQ_PPI_ERROR,
 171                 .flags = IORESOURCE_IRQ,
 172         },
 173 };
 174
 175 static struct platform_device bfin_lq035q1_device = {
 176         .name           = "bfin-lq035q1",
 177         .id             = -1,
 178         .num_resources  = ARRAY_SIZE(bfin_lq035q1_resources),
 179         .resource       = bfin_lq035q1_resources,
 180         .dev            = {
 181                 .platform_data = &bfin_lq035q1_data,
 182         },
 183 };
 184 #endif
 185
 186 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 187 static struct mtd_partition ezkit_partitions[] = {
 188         {
 189                 .name       = "bootloader(nor)",
 190                 .size       = 0x40000,
 191                 .offset     = 0,
 192         }, {
 193                 .name       = "linux kernel(nor)",
 194                 .size       = 0x1C0000,
 195                 .offset     = MTDPART_OFS_APPEND,
 196         }, {
 197                 .name       = "file system(nor)",
 198                 .size       = MTDPART_SIZ_FULL,
 199                 .offset     = MTDPART_OFS_APPEND,
 200         }
 201 };
 202
 203 static struct physmap_flash_data ezkit_flash_data = {
 204         .width      = 2,
 205         .parts      = ezkit_partitions,
 206         .nr_parts   = ARRAY_SIZE(ezkit_partitions),
 207 };
 208
 209 static struct resource ezkit_flash_resource = {
 210         .start = 0x20000000,
 211         .end   = 0x203fffff,
 212         .flags = IORESOURCE_MEM,
 213 };
 214
 215 static struct platform_device ezkit_flash_device = {
 216         .name          = "physmap-flash",
 217         .id            = 0,
 218         .dev = {
 219                 .platform_data = &ezkit_flash_data,
 220         },
 221         .num_resources = 1,
 222         .resource      = &ezkit_flash_resource,
 223 };
 224 #endif
 225
 226 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 227 static struct mtd_partition partition_info[] = {
 228         {
 229                 .name = "bootloader(nand)",
 230                 .offset = 0,
 231                 .size = 0x40000,
 232         }, {
 233                 .name = "linux kernel(nand)",
 234                 .offset = MTDPART_OFS_APPEND,
 235                 .size = 4 * 1024 * 1024,
 236         },
 237         {
 238                 .name = "file system(nand)",
 239                 .offset = MTDPART_OFS_APPEND,
 240                 .size = MTDPART_SIZ_FULL,
 241         },
 242 };
 243
 244 static struct bf5xx_nand_platform bf5xx_nand_platform = {
 245         .data_width = NFC_NWIDTH_8,
 246         .partitions = partition_info,
 247         .nr_partitions = ARRAY_SIZE(partition_info),
 248         .rd_dly = 3,
 249         .wr_dly = 3,
 250 };
 251
 252 static struct resource bf5xx_nand_resources[] = {
 253         {
 254                 .start = NFC_CTL,
 255                 .end = NFC_DATA_RD + 2,
 256                 .flags = IORESOURCE_MEM,
 257         },
 258         {
 259                 .start = CH_NFC,
 260                 .end = CH_NFC,
 261                 .flags = IORESOURCE_IRQ,
 262         },
 263 };
 264
 265 static struct platform_device bf5xx_nand_device = {
 266         .name = "bf5xx-nand",
 267         .id = 0,
 268         .num_resources = ARRAY_SIZE(bf5xx_nand_resources),
 269         .resource = bf5xx_nand_resources,
 270         .dev = {
 271                 .platform_data = &bf5xx_nand_platform,
 272         },
 273 };
 274 #endif
 275
 276 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
 277 static struct resource bfin_pcmcia_cf_resources[] = {
 278         {
 279                 .start = 0x20310000, /* IO PORT */
 280                 .end = 0x20312000,
 281                 .flags = IORESOURCE_MEM,
 282         }, {
 283                 .start = 0x20311000, /* Attribute Memory */
 284                 .end = 0x20311FFF,
 285                 .flags = IORESOURCE_MEM,
 286         }, {
 287                 .start = IRQ_PF4,
 288                 .end = IRQ_PF4,
 289                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 290         }, {
 291                 .start = 6, /* Card Detect PF6 */
 292                 .end = 6,
 293                 .flags = IORESOURCE_IRQ,
 294         },
 295 };
 296
 297 static struct platform_device bfin_pcmcia_cf_device = {
 298         .name = "bfin_cf_pcmcia",
 299         .id = -1,
 300         .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
 301         .resource = bfin_pcmcia_cf_resources,
 302 };
 303 #endif
 304
 305 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 306 static struct platform_device rtc_device = {
 307         .name = "rtc-bfin",
 308         .id   = -1,
 309 };
 310 #endif
 311
 312 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 313 #include <linux/smc91x.h>
 314
 315 static struct smc91x_platdata smc91x_info = {
 316         .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
 317         .leda = RPC_LED_100_10,
 318         .ledb = RPC_LED_TX_RX,
 319 };
 320
 321 static struct resource smc91x_resources[] = {
 322         {
 323                 .name = "smc91x-regs",
 324                 .start = 0x20300300,
 325                 .end = 0x20300300 + 16,
 326                 .flags = IORESOURCE_MEM,
 327         }, {
 328
 329                 .start = IRQ_PF7,
 330                 .end = IRQ_PF7,
 331                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 332         },
 333 };
 334 static struct platform_device smc91x_device = {
 335         .name = "smc91x",
 336         .id = 0,
 337         .num_resources = ARRAY_SIZE(smc91x_resources),
 338         .resource = smc91x_resources,
 339         .dev    = {
 340                 .platform_data  = &smc91x_info,
 341         },
 342 };
 343 #endif
 344
 345 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 346 static struct resource dm9000_resources[] = {
 347         [0] = {
 348                 .start  = 0x203FB800,
 349                 .end    = 0x203FB800 + 1,
 350                 .flags  = IORESOURCE_MEM,
 351         },
 352         [1] = {
 353                 .start  = 0x203FB800 + 4,
 354                 .end    = 0x203FB800 + 5,
 355                 .flags  = IORESOURCE_MEM,
 356         },
 357         [2] = {
 358                 .start  = IRQ_PF9,
 359                 .end    = IRQ_PF9,
 360                 .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
 361         },
 362 };
 363
 364 static struct platform_device dm9000_device = {
 365         .name           = "dm9000",
 366         .id             = -1,
 367         .num_resources  = ARRAY_SIZE(dm9000_resources),
 368         .resource       = dm9000_resources,
 369 };
 370 #endif
 371
 372 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 373 #include <linux/bfin_mac.h>
 374 static const unsigned short bfin_mac_peripherals[] = P_RMII0;
 375
 376 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
 377         {
 378                 .addr = 1,
 379                 .irq = IRQ_MAC_PHYINT,
 380         },
 381 };
 382
 383 static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
 384         .phydev_number = 1,
 385         .phydev_data = bfin_phydev_data,
 386         .phy_mode = PHY_INTERFACE_MODE_RMII,
 387         .mac_peripherals = bfin_mac_peripherals,
 388 };
 389
 390 static struct platform_device bfin_mii_bus = {
 391         .name = "bfin_mii_bus",
 392         .dev = {
 393                 .platform_data = &bfin_mii_bus_data,
 394         }
 395 };
 396
 397 static struct platform_device bfin_mac_device = {
 398         .name = "bfin_mac",
 399         .dev = {
 400                 .platform_data = &bfin_mii_bus,
 401         }
 402 };
 403 #endif
 404
 405 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 406 static struct resource net2272_bfin_resources[] = {
 407         {
 408                 .start = 0x20300000,
 409                 .end = 0x20300000 + 0x100,
 410                 .flags = IORESOURCE_MEM,
 411         }, {
 412                 .start = 1,
 413                 .flags = IORESOURCE_BUS,
 414         }, {
 415                 .start = IRQ_PF7,
 416                 .end = IRQ_PF7,
 417                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 418         },
 419 };
 420
 421 static struct platform_device net2272_bfin_device = {
 422         .name = "net2272",
 423         .id = -1,
 424         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
 425         .resource = net2272_bfin_resources,
 426 };
 427 #endif
 428
 429 #if defined(CONFIG_MTD_M25P80) \
 430         || defined(CONFIG_MTD_M25P80_MODULE)
 431 static struct mtd_partition bfin_spi_flash_partitions[] = {
 432         {
 433                 .name = "bootloader(spi)",
 434                 .size = 0x00040000,
 435                 .offset = 0,
 436                 .mask_flags = MTD_CAP_ROM
 437         }, {
 438                 .name = "linux kernel(spi)",
 439                 .size = MTDPART_SIZ_FULL,
 440                 .offset = MTDPART_OFS_APPEND,
 441         }
 442 };
 443
 444 static struct flash_platform_data bfin_spi_flash_data = {
 445         .name = "m25p80",
 446         .parts = bfin_spi_flash_partitions,
 447         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 448         .type = "m25p16",
 449 };
 450
 451 /* SPI flash chip (m25p64) */
 452 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 453         .enable_dma = 0,         /* use dma transfer with this chip*/
 454 };
 455 #endif
 456
 457 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 458 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 459         .enable_dma = 0,
 460 };
 461 #endif
 462
 463 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 464 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 465         .model                  = 7877,
 466         .vref_delay_usecs       = 50,   /* internal, no capacitor */
 467         .x_plate_ohms           = 419,
 468         .y_plate_ohms           = 486,
 469         .pressure_max           = 1000,
 470         .pressure_min           = 0,
 471         .stopacq_polarity       = 1,
 472         .first_conversion_delay = 3,
 473         .acquisition_time       = 1,
 474         .averaging              = 1,
 475         .pen_down_acc_interval  = 1,
 476 };
 477 #endif
 478
 479 #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
 480 #include <linux/spi/ad7879.h>
 481 static const struct ad7879_platform_data bfin_ad7879_ts_info = {
 482         .model                  = 7879, /* Model = AD7879 */
 483         .x_plate_ohms           = 620,  /* 620 Ohm from the touch datasheet */
 484         .pressure_max           = 10000,
 485         .pressure_min           = 0,
 486         .first_conversion_delay = 3,    /* wait 512us before do a first conversion */
 487         .acquisition_time       = 1,    /* 4us acquisition time per sample */
 488         .median                 = 2,    /* do 8 measurements */
 489         .averaging              = 1,    /* take the average of 4 middle samples */
 490         .pen_down_acc_interval  = 255,  /* 9.4 ms */
 491         .gpio_export            = 0,    /* Export GPIO to gpiolib */
 492 };
 493 #endif
 494
 495 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \
 496         defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
 497
 498 static const u16 bfin_snd_pin[][7] = {
 499         {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
 500                 P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0, 0},
 501         {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
 502                 P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_TFS, 0},
 503 };
 504
 505 static struct bfin_snd_platform_data bfin_snd_data[] = {
 506         {
 507                 .pin_req = &bfin_snd_pin[0][0],
 508         },
 509         {
 510                 .pin_req = &bfin_snd_pin[1][0],
 511         },
 512 };
 513
 514 #define BFIN_SND_RES(x) \
 515         [x] = { \
 516                 { \
 517                         .start = SPORT##x##_TCR1, \
 518                         .end = SPORT##x##_TCR1, \
 519                         .flags = IORESOURCE_MEM \
 520                 }, \
 521                 { \
 522                         .start = CH_SPORT##x##_RX, \
 523                         .end = CH_SPORT##x##_RX, \
 524                         .flags = IORESOURCE_DMA, \
 525                 }, \
 526                 { \
 527                         .start = CH_SPORT##x##_TX, \
 528                         .end = CH_SPORT##x##_TX, \
 529                         .flags = IORESOURCE_DMA, \
 530                 }, \
 531                 { \
 532                         .start = IRQ_SPORT##x##_ERROR, \
 533                         .end = IRQ_SPORT##x##_ERROR, \
 534                         .flags = IORESOURCE_IRQ, \
 535                 } \
 536         }
 537
 538 static struct resource bfin_snd_resources[][4] = {
 539         BFIN_SND_RES(0),
 540         BFIN_SND_RES(1),
 541 };
 542 #endif
 543
 544 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
 545 static struct platform_device bfin_i2s_pcm = {
 546         .name = "bfin-i2s-pcm-audio",
 547         .id = -1,
 548 };
 549 #endif
 550
 551 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
 552 static struct platform_device bfin_tdm_pcm = {
 553         .name = "bfin-tdm-pcm-audio",
 554         .id = -1,
 555 };
 556 #endif
 557
 558 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
 559 static struct platform_device bfin_ac97_pcm = {
 560         .name = "bfin-ac97-pcm-audio",
 561         .id = -1,
 562 };
 563 #endif
 564
 565 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
 566 static struct platform_device bfin_i2s = {
 567         .name = "bfin-i2s",
 568         .id = CONFIG_SND_BF5XX_SPORT_NUM,
 569         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
 570         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
 571         .dev = {
 572                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
 573         },
 574 };
 575 #endif
 576
 577 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
 578 static struct platform_device bfin_tdm = {
 579         .name = "bfin-tdm",
 580         .id = CONFIG_SND_BF5XX_SPORT_NUM,
 581         .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
 582         .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
 583         .dev = {
 584                 .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
 585         },
 586 };
 587 #endif
 588
 589 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 590 #if defined(CONFIG_MTD_M25P80) \
 591         || defined(CONFIG_MTD_M25P80_MODULE)
 592         {
 593                 /* the modalias must be the same as spi device driver name */
 594                 .modalias = "m25p80", /* Name of spi_driver for this device */
 595                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 596                 .bus_num = 0, /* Framework bus number */
 597                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 598                 .platform_data = &bfin_spi_flash_data,
 599                 .controller_data = &spi_flash_chip_info,
 600                 .mode = SPI_MODE_3,
 601         },
 602 #endif
 603
 604 #if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
 605         || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
 606         {
 607                 .modalias = "ad183x",
 608                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 609                 .bus_num = 0,
 610                 .chip_select = 4,
 611                 .platform_data = "ad1836",
 612                 .mode = SPI_MODE_3,
 613         },
 614 #endif
 615 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 616         {
 617                 .modalias = "mmc_spi",
 618                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 619                 .bus_num = 0,
 620                 .chip_select = 3,
 621                 .controller_data = &mmc_spi_chip_info,
 622                 .mode = SPI_MODE_0,
 623         },
 624 #endif
 625
 626 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 627         {
 628                 .modalias               = "ad7877",
 629                 .platform_data          = &bfin_ad7877_ts_info,
 630                 .irq                    = IRQ_PF8,
 631                 .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
 632                 .bus_num        = 0,
 633                 .chip_select  = 2,
 634         },
 635 #endif
 636 #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
 637         {
 638                 .modalias = "ad7879",
 639                 .platform_data = &bfin_ad7879_ts_info,
 640                 .irq = IRQ_PF8,
 641                 .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
 642                 .bus_num = 0,
 643                 .chip_select = 3,
 644                 .mode = SPI_CPHA | SPI_CPOL,
 645         },
 646 #endif
 647 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 648         {
 649                 .modalias = "spidev",
 650                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 651                 .bus_num = 0,
 652                 .chip_select = 1,
 653         },
 654 #endif
 655 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 656         {
 657                 .modalias = "bfin-lq035q1-spi",
 658                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 659                 .bus_num = 0,
 660                 .chip_select = 7,
 661                 .mode = SPI_CPHA | SPI_CPOL,
 662         },
 663 #endif
 664 };
 665
 666 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 667 /* SPI controller data */
 668 static struct bfin5xx_spi_master bfin_spi0_info = {
 669         .num_chipselect = 8,
 670         .enable_dma = 1,  /* master has the ability to do dma transfer */
 671         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 672 };
 673
 674 /* SPI (0) */
 675 static struct resource bfin_spi0_resource[] = {
 676         [0] = {
 677                 .start = SPI0_REGBASE,
 678                 .end   = SPI0_REGBASE + 0xFF,
 679                 .flags = IORESOURCE_MEM,
 680                 },
 681         [1] = {
 682                 .start = CH_SPI,
 683                 .end   = CH_SPI,
 684                 .flags = IORESOURCE_DMA,
 685         },
 686         [2] = {
 687                 .start = IRQ_SPI,
 688                 .end   = IRQ_SPI,
 689                 .flags = IORESOURCE_IRQ,
 690         },
 691 };
 692
 693 static struct platform_device bfin_spi0_device = {
 694         .name = "bfin-spi",
 695         .id = 0, /* Bus number */
 696         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 697         .resource = bfin_spi0_resource,
 698         .dev = {
 699                 .platform_data = &bfin_spi0_info, /* Passed to driver */
 700         },
 701 };
 702 #endif  /* spi master and devices */
 703
 704 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 705 #ifdef CONFIG_SERIAL_BFIN_UART0
 706 static struct resource bfin_uart0_resources[] = {
 707         {
 708                 .start = UART0_THR,
 709                 .end = UART0_GCTL+2,
 710                 .flags = IORESOURCE_MEM,
 711         },
 712         {
 713                 .start = IRQ_UART0_RX,
 714                 .end = IRQ_UART0_RX+1,
 715                 .flags = IORESOURCE_IRQ,
 716         },
 717         {
 718                 .start = IRQ_UART0_ERROR,
 719                 .end = IRQ_UART0_ERROR,
 720                 .flags = IORESOURCE_IRQ,
 721         },
 722         {
 723                 .start = CH_UART0_TX,
 724                 .end = CH_UART0_TX,
 725                 .flags = IORESOURCE_DMA,
 726         },
 727         {
 728                 .start = CH_UART0_RX,
 729                 .end = CH_UART0_RX,
 730                 .flags = IORESOURCE_DMA,
 731         },
 732 };
 733
 734 static unsigned short bfin_uart0_peripherals[] = {
 735         P_UART0_TX, P_UART0_RX, 0
 736 };
 737
 738 static struct platform_device bfin_uart0_device = {
 739         .name = "bfin-uart",
 740         .id = 0,
 741         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
 742         .resource = bfin_uart0_resources,
 743         .dev = {
 744                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
 745         },
 746 };
 747 #endif
 748 #ifdef CONFIG_SERIAL_BFIN_UART1
 749 static struct resource bfin_uart1_resources[] = {
 750         {
 751                 .start = UART1_THR,
 752                 .end = UART1_GCTL+2,
 753                 .flags = IORESOURCE_MEM,
 754         },
 755         {
 756                 .start = IRQ_UART1_RX,
 757                 .end = IRQ_UART1_RX+1,
 758                 .flags = IORESOURCE_IRQ,
 759         },
 760         {
 761                 .start = IRQ_UART1_ERROR,
 762                 .end = IRQ_UART1_ERROR,
 763                 .flags = IORESOURCE_IRQ,
 764         },
 765         {
 766                 .start = CH_UART1_TX,
 767                 .end = CH_UART1_TX,
 768                 .flags = IORESOURCE_DMA,
 769         },
 770         {
 771                 .start = CH_UART1_RX,
 772                 .end = CH_UART1_RX,
 773                 .flags = IORESOURCE_DMA,
 774         },
 775 #ifdef CONFIG_BFIN_UART1_CTSRTS
 776         {       /* CTS pin */
 777                 .start = GPIO_PF9,
 778                 .end = GPIO_PF9,
 779                 .flags = IORESOURCE_IO,
 780         },
 781         {       /* RTS pin */
 782                 .start = GPIO_PF10,
 783                 .end = GPIO_PF10,
 784                 .flags = IORESOURCE_IO,
 785         },
 786 #endif
 787 };
 788
 789 static unsigned short bfin_uart1_peripherals[] = {
 790         P_UART1_TX, P_UART1_RX, 0
 791 };
 792
 793 static struct platform_device bfin_uart1_device = {
 794         .name = "bfin-uart",
 795         .id = 1,
 796         .num_resources = ARRAY_SIZE(bfin_uart1_resources),
 797         .resource = bfin_uart1_resources,
 798         .dev = {
 799                 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
 800         },
 801 };
 802 #endif
 803 #endif
 804
 805 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 806 #ifdef CONFIG_BFIN_SIR0
 807 static struct resource bfin_sir0_resources[] = {
 808         {
 809                 .start = 0xFFC00400,
 810                 .end = 0xFFC004FF,
 811                 .flags = IORESOURCE_MEM,
 812         },
 813         {
 814                 .start = IRQ_UART0_RX,
 815                 .end = IRQ_UART0_RX+1,
 816                 .flags = IORESOURCE_IRQ,
 817         },
 818         {
 819                 .start = CH_UART0_RX,
 820                 .end = CH_UART0_RX+1,
 821                 .flags = IORESOURCE_DMA,
 822         },
 823 };
 824
 825 static struct platform_device bfin_sir0_device = {
 826         .name = "bfin_sir",
 827         .id = 0,
 828         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 829         .resource = bfin_sir0_resources,
 830 };
 831 #endif
 832 #ifdef CONFIG_BFIN_SIR1
 833 static struct resource bfin_sir1_resources[] = {
 834         {
 835                 .start = 0xFFC02000,
 836                 .end = 0xFFC020FF,
 837                 .flags = IORESOURCE_MEM,
 838         },
 839         {
 840                 .start = IRQ_UART1_RX,
 841                 .end = IRQ_UART1_RX+1,
 842                 .flags = IORESOURCE_IRQ,
 843         },
 844         {
 845                 .start = CH_UART1_RX,
 846                 .end = CH_UART1_RX+1,
 847                 .flags = IORESOURCE_DMA,
 848         },
 849 };
 850
 851 static struct platform_device bfin_sir1_device = {
 852         .name = "bfin_sir",
 853         .id = 1,
 854         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 855         .resource = bfin_sir1_resources,
 856 };
 857 #endif
 858 #endif
 859
 860 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 861 static struct resource bfin_twi0_resource[] = {
 862         [0] = {
 863                 .start = TWI0_REGBASE,
 864                 .end   = TWI0_REGBASE,
 865                 .flags = IORESOURCE_MEM,
 866         },
 867         [1] = {
 868                 .start = IRQ_TWI,
 869                 .end   = IRQ_TWI,
 870                 .flags = IORESOURCE_IRQ,
 871         },
 872 };
 873
 874 static struct platform_device i2c_bfin_twi_device = {
 875         .name = "i2c-bfin-twi",
 876         .id = 0,
 877         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
 878         .resource = bfin_twi0_resource,
 879 };
 880 #endif
 881
 882 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
 883 #include <linux/mfd/adp5520.h>
 884
 885         /*
 886          *  ADP5520/5501 LEDs Data
 887          */
 888
 889 static struct led_info adp5520_leds[] = {
 890         {
 891                 .name = "adp5520-led1",
 892                 .default_trigger = "none",
 893                 .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
 894         },
 895 };
 896
 897 static struct adp5520_leds_platform_data adp5520_leds_data = {
 898         .num_leds = ARRAY_SIZE(adp5520_leds),
 899         .leds = adp5520_leds,
 900         .fade_in = ADP5520_FADE_T_600ms,
 901         .fade_out = ADP5520_FADE_T_600ms,
 902         .led_on_time = ADP5520_LED_ONT_600ms,
 903 };
 904
 905         /*
 906          *  ADP5520 Keypad Data
 907          */
 908
 909 static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
 910         [ADP5520_KEY(3, 3)]     = KEY_1,
 911         [ADP5520_KEY(2, 3)]     = KEY_2,
 912         [ADP5520_KEY(1, 3)]     = KEY_3,
 913         [ADP5520_KEY(0, 3)]     = KEY_UP,
 914         [ADP5520_KEY(3, 2)]     = KEY_4,
 915         [ADP5520_KEY(2, 2)]     = KEY_5,
 916         [ADP5520_KEY(1, 2)]     = KEY_6,
 917         [ADP5520_KEY(0, 2)]     = KEY_DOWN,
 918         [ADP5520_KEY(3, 1)]     = KEY_7,
 919         [ADP5520_KEY(2, 1)]     = KEY_8,
 920         [ADP5520_KEY(1, 1)]     = KEY_9,
 921         [ADP5520_KEY(0, 1)]     = KEY_DOT,
 922         [ADP5520_KEY(3, 0)]     = KEY_BACKSPACE,
 923         [ADP5520_KEY(2, 0)]     = KEY_0,
 924         [ADP5520_KEY(1, 0)]     = KEY_HELP,
 925         [ADP5520_KEY(0, 0)]     = KEY_ENTER,
 926 };
 927
 928 static struct adp5520_keys_platform_data adp5520_keys_data = {
 929         .rows_en_mask   = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
 930         .cols_en_mask   = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
 931         .keymap         = adp5520_keymap,
 932         .keymapsize     = ARRAY_SIZE(adp5520_keymap),
 933         .repeat         = 0,
 934 };
 935
 936         /*
 937          *  ADP5520/5501 Multifunction Device Init Data
 938          */
 939
 940 static struct adp5520_platform_data adp5520_pdev_data = {
 941         .leds = &adp5520_leds_data,
 942         .keys = &adp5520_keys_data,
 943 };
 944
 945 #endif
 946
 947 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 948 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 949         {
 950                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 951         },
 952 #endif
 953 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 954         {
 955                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 956                 .irq = IRQ_PF8,
 957         },
 958 #endif
 959 #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
 960         {
 961                 I2C_BOARD_INFO("bfin-adv7393", 0x2B),
 962         },
 963 #endif
 964 #if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
 965         {
 966                 I2C_BOARD_INFO("ad7879", 0x2C),
 967                 .irq = IRQ_PF8,
 968                 .platform_data = (void *)&bfin_ad7879_ts_info,
 969         },
 970 #endif
 971 #if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
 972         {
 973                 I2C_BOARD_INFO("pmic-adp5520", 0x32),
 974                 .irq = IRQ_PF9,
 975                 .platform_data = (void *)&adp5520_pdev_data,
 976         },
 977 #endif
 978 #if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
 979         {
 980                 I2C_BOARD_INFO("ssm2602", 0x1b),
 981         },
 982 #endif
 983 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 984         {
 985                 I2C_BOARD_INFO("ad5252", 0x2f),
 986         },
 987 #endif
 988 #if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
 989         {
 990                 I2C_BOARD_INFO("adau1373", 0x1A),
 991         },
 992 #endif
 993 };
 994
 995 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 996 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 997 static struct resource bfin_sport0_uart_resources[] = {
 998         {
 999                 .start = SPORT0_TCR1,
1000                 .end = SPORT0_MRCS3+4,
1001                 .flags = IORESOURCE_MEM,
1002         },
1003         {
1004                 .start = IRQ_SPORT0_RX,
1005                 .end = IRQ_SPORT0_RX+1,
1006                 .flags = IORESOURCE_IRQ,
1007         },
1008         {
1009                 .start = IRQ_SPORT0_ERROR,
1010                 .end = IRQ_SPORT0_ERROR,
1011                 .flags = IORESOURCE_IRQ,
1012         },
1013 };
1014
1015 static unsigned short bfin_sport0_peripherals[] = {
1016         P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
1017         P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
1018 };
1019
1020 static struct platform_device bfin_sport0_uart_device = {
1021         .name = "bfin-sport-uart",
1022         .id = 0,
1023         .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
1024         .resource = bfin_sport0_uart_resources,
1025         .dev = {
1026                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
1027         },
1028 };
1029 #endif
1030 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1031 static struct resource bfin_sport1_uart_resources[] = {
1032         {
1033                 .start = SPORT1_TCR1,
1034                 .end = SPORT1_MRCS3+4,
1035                 .flags = IORESOURCE_MEM,
1036         },
1037         {
1038                 .start = IRQ_SPORT1_RX,
1039                 .end = IRQ_SPORT1_RX+1,
1040                 .flags = IORESOURCE_IRQ,
1041         },
1042         {
1043                 .start = IRQ_SPORT1_ERROR,
1044                 .end = IRQ_SPORT1_ERROR,
1045                 .flags = IORESOURCE_IRQ,
1046         },
1047 };
1048
1049 static unsigned short bfin_sport1_peripherals[] = {
1050         P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
1051         P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
1052 };
1053
1054 static struct platform_device bfin_sport1_uart_device = {
1055         .name = "bfin-sport-uart",
1056         .id = 1,
1057         .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
1058         .resource = bfin_sport1_uart_resources,
1059         .dev = {
1060                 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
1061         },
1062 };
1063 #endif
1064 #endif
1065
1066 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1067 #include <linux/gpio_keys.h>
1068
1069 static struct gpio_keys_button bfin_gpio_keys_table[] = {
1070         {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
1071         {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
1072 };
1073
1074 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
1075         .buttons        = bfin_gpio_keys_table,
1076         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
1077 };
1078
1079 static struct platform_device bfin_device_gpiokeys = {
1080         .name      = "gpio-keys",
1081         .dev = {
1082                 .platform_data = &bfin_gpio_keys_data,
1083         },
1084 };
1085 #endif
1086
1087 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
1088 #include <asm/bfin_rotary.h>
1089
1090 static struct bfin_rotary_platform_data bfin_rotary_data = {
1091         /*.rotary_up_key     = KEY_UP,*/
1092         /*.rotary_down_key   = KEY_DOWN,*/
1093         .rotary_rel_code   = REL_WHEEL,
1094         .rotary_button_key = KEY_ENTER,
1095         .debounce          = 10,        /* 0..17 */
1096         .mode              = ROT_QUAD_ENC | ROT_DEBE,
1097 };
1098
1099 static struct resource bfin_rotary_resources[] = {
1100         {
1101                 .start = IRQ_CNT,
1102                 .end = IRQ_CNT,
1103                 .flags = IORESOURCE_IRQ,
1104         },
1105 };
1106
1107 static struct platform_device bfin_rotary_device = {
1108         .name           = "bfin-rotary",
1109         .id             = -1,
1110         .num_resources  = ARRAY_SIZE(bfin_rotary_resources),
1111         .resource       = bfin_rotary_resources,
1112         .dev            = {
1113                 .platform_data = &bfin_rotary_data,
1114         },
1115 };
1116 #endif
1117
1118 static const unsigned int cclk_vlev_datasheet[] =
1119 {
1120         VRPAIR(VLEV_100, 400000000),
1121         VRPAIR(VLEV_105, 426000000),
1122         VRPAIR(VLEV_110, 500000000),
1123         VRPAIR(VLEV_115, 533000000),
1124         VRPAIR(VLEV_120, 600000000),
1125 };
1126
1127 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
1128         .tuple_tab = cclk_vlev_datasheet,
1129         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
1130         .vr_settling_time = 25 /* us */,
1131 };
1132
1133 static struct platform_device bfin_dpmc = {
1134         .name = "bfin dpmc",
1135         .dev = {
1136                 .platform_data = &bfin_dmpc_vreg_data,
1137         },
1138 };
1139
1140 static struct platform_device *stamp_devices[] __initdata = {
1141
1142         &bfin_dpmc,
1143
1144 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
1145         &bf5xx_nand_device,
1146 #endif
1147
1148 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
1149         &bfin_pcmcia_cf_device,
1150 #endif
1151
1152 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
1153         &rtc_device,
1154 #endif
1155
1156 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
1157         &bfin_isp1760_device,
1158 #endif
1159
1160 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
1161         &musb_device,
1162 #endif
1163
1164 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
1165         &smc91x_device,
1166 #endif
1167
1168 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
1169         &dm9000_device,
1170 #endif
1171
1172 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
1173         &bfin_mii_bus,
1174         &bfin_mac_device,
1175 #endif
1176
1177 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
1178         &net2272_bfin_device,
1179 #endif
1180
1181 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
1182         &bfin_spi0_device,
1183 #endif
1184
1185 #if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
1186         &bf52x_t350mcqb_device,
1187 #endif
1188
1189 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
1190         &bfin_lq035q1_device,
1191 #endif
1192
1193 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
1194 #ifdef CONFIG_SERIAL_BFIN_UART0
1195         &bfin_uart0_device,
1196 #endif
1197 #ifdef CONFIG_SERIAL_BFIN_UART1
1198         &bfin_uart1_device,
1199 #endif
1200 #endif
1201
1202 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
1203 #ifdef CONFIG_BFIN_SIR0
1204         &bfin_sir0_device,
1205 #endif
1206 #ifdef CONFIG_BFIN_SIR1
1207         &bfin_sir1_device,
1208 #endif
1209 #endif
1210
1211 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
1212         &i2c_bfin_twi_device,
1213 #endif
1214
1215 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
1216 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1217         &bfin_sport0_uart_device,
1218 #endif
1219 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1220         &bfin_sport1_uart_device,
1221 #endif
1222 #endif
1223
1224 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
1225         &bfin_device_gpiokeys,
1226 #endif
1227
1228 #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
1229         &bfin_rotary_device,
1230 #endif
1231
1232 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
1233         &ezkit_flash_device,
1234 #endif
1235
1236 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
1237         &bfin_i2s_pcm,
1238 #endif
1239
1240 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
1241         &bfin_tdm_pcm,
1242 #endif
1243
1244 #if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
1245         &bfin_ac97_pcm,
1246 #endif
1247
1248 #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
1249         &bfin_i2s,
1250 #endif
1251
1252 #if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
1253         &bfin_tdm,
1254 #endif
1255 };
1256
1257 static int __init ezkit_init(void)
1258 {
1259         printk(KERN_INFO "%s(): registering device resources\n", __func__);
1260         i2c_register_board_info(0, bfin_i2c_board_info,
1261                                 ARRAY_SIZE(bfin_i2c_board_info));
1262         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
1263         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
1264         return 0;
1265 }
1266
1267 arch_initcall(ezkit_init);
1268
1269 static struct platform_device *ezkit_early_devices[] __initdata = {
1270 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
1271 #ifdef CONFIG_SERIAL_BFIN_UART0
1272         &bfin_uart0_device,
1273 #endif
1274 #ifdef CONFIG_SERIAL_BFIN_UART1
1275         &bfin_uart1_device,
1276 #endif
1277 #endif
1278
1279 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
1280 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
1281         &bfin_sport0_uart_device,
1282 #endif
1283 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
1284         &bfin_sport1_uart_device,
1285 #endif
1286 #endif
1287 };
1288
1289 void __init native_machine_early_platform_add_devices(void)
1290 {
1291         printk(KERN_INFO "register early platform devices\n");
1292         early_platform_add_devices(ezkit_early_devices,
1293                 ARRAY_SIZE(ezkit_early_devices));
1294 }
1295
1296 void native_machine_restart(char *cmd)
1297 {
1298         /* workaround reboot hang when booting from SPI */
1299         if ((bfin_read_SYSCR() & 0x7) == 0x3)
1300                 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
1301 }
1302
1303 void bfin_get_ether_addr(char *addr)
1304 {
1305         /* the MAC is stored in OTP memory page 0xDF */
1306         u32 ret;
1307         u64 otp_mac;
1308         u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
1309
1310         ret = otp_read(0xDF, 0x00, &otp_mac);
1311         if (!(ret & 0x1)) {
1312                 char *otp_mac_p = (char *)&otp_mac;
1313                 for (ret = 0; ret < 6; ++ret)
1314                         addr[ret] = otp_mac_p[5 - ret];
1315         }
1316 }
1317 EXPORT_SYMBOL(bfin_get_ether_addr);