arch/blackfin/mach-bf518/boards/tcm-bf518.c

   1 /*
   2  * Copyright 2004-2009 Analog Devices Inc.
   3  *                2005 National ICT Australia (NICTA)
   4  *                      Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Licensed under the GPL-2 or later.
   7  */
   8
   9 #include <linux/device.h>
  10 #include <linux/etherdevice.h>
  11 #include <linux/platform_device.h>
  12 #include <linux/mtd/mtd.h>
  13 #include <linux/mtd/partitions.h>
  14 #include <linux/mtd/physmap.h>
  15 #include <linux/spi/spi.h>
  16 #include <linux/spi/flash.h>
  17
  18 #include <linux/i2c.h>
  19 #include <linux/irq.h>
  20 #include <linux/interrupt.h>
  21 #include <asm/dma.h>
  22 #include <asm/bfin5xx_spi.h>
  23 #include <asm/reboot.h>
  24 #include <asm/portmux.h>
  25 #include <asm/dpmc.h>
  26 #include <asm/bfin_sdh.h>
  27 #include <linux/spi/ad7877.h>
  28 #include <net/dsa.h>
  29
  30 /*
  31  * Name the Board for the /proc/cpuinfo
  32  */
  33 const char bfin_board_name[] = "Bluetechnix TCM-BF518";
  34
  35 /*
  36  *  Driver needs to know address, irq and flag pin.
  37  */
  38
  39 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
  40 static struct mtd_partition tcm_partitions[] = {
  41         {
  42                 .name       = "bootloader(nor)",
  43                 .size       = 0x40000,
  44                 .offset     = 0,
  45         },
  46         {
  47                 .name       = "linux(nor)",
  48                 .size       = 0x1C0000,
  49                 .offset     = MTDPART_OFS_APPEND,
  50         }
  51 };
  52
  53 static struct physmap_flash_data tcm_flash_data = {
  54         .width      = 2,
  55         .parts      = tcm_partitions,
  56         .nr_parts   = ARRAY_SIZE(tcm_partitions),
  57 };
  58
  59 static struct resource tcm_flash_resource = {
  60         .start = 0x20000000,
  61         .end   = 0x201fffff,
  62         .flags = IORESOURCE_MEM,
  63 };
  64
  65 static struct platform_device tcm_flash_device = {
  66         .name          = "physmap-flash",
  67         .id            = 0,
  68         .dev = {
  69                 .platform_data = &tcm_flash_data,
  70         },
  71         .num_resources = 1,
  72         .resource      = &tcm_flash_resource,
  73 };
  74 #endif
  75
  76 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
  77 static struct platform_device rtc_device = {
  78         .name = "rtc-bfin",
  79         .id   = -1,
  80 };
  81 #endif
  82
  83 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
  84 #include <linux/bfin_mac.h>
  85 static const unsigned short bfin_mac_peripherals[] = P_MII0;
  86
  87 static struct bfin_phydev_platform_data bfin_phydev_data[] = {
  88         {
  89                 .addr = 1,
  90                 .irq = IRQ_MAC_PHYINT,
  91         },
  92 };
  93
  94 static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
  95         .phydev_number = 1,
  96         .phydev_data = bfin_phydev_data,
  97         .phy_mode = PHY_INTERFACE_MODE_MII,
  98         .mac_peripherals = bfin_mac_peripherals,
  99 };
 100
 101 static struct platform_device bfin_mii_bus = {
 102         .name = "bfin_mii_bus",
 103         .dev = {
 104                 .platform_data = &bfin_mii_bus_data,
 105         }
 106 };
 107
 108 static struct platform_device bfin_mac_device = {
 109         .name = "bfin_mac",
 110         .dev = {
 111                 .platform_data = &bfin_mii_bus,
 112         }
 113 };
 114 #endif
 115
 116 #if defined(CONFIG_MTD_M25P80) \
 117         || defined(CONFIG_MTD_M25P80_MODULE)
 118 static struct mtd_partition bfin_spi_flash_partitions[] = {
 119         {
 120                 .name = "bootloader(spi)",
 121                 .size = 0x00040000,
 122                 .offset = 0,
 123                 .mask_flags = MTD_CAP_ROM
 124         }, {
 125                 .name = "linux kernel(spi)",
 126                 .size = MTDPART_SIZ_FULL,
 127                 .offset = MTDPART_OFS_APPEND,
 128         }
 129 };
 130
 131 static struct flash_platform_data bfin_spi_flash_data = {
 132         .name = "m25p80",
 133         .parts = bfin_spi_flash_partitions,
 134         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 135         .type = "m25p16",
 136 };
 137
 138 /* SPI flash chip (m25p64) */
 139 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 140         .enable_dma = 0,         /* use dma transfer with this chip*/
 141 };
 142 #endif
 143
 144 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 145 static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 146         .enable_dma = 0,
 147 };
 148 #endif
 149
 150 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 151 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
 152         .model                  = 7877,
 153         .vref_delay_usecs       = 50,   /* internal, no capacitor */
 154         .x_plate_ohms           = 419,
 155         .y_plate_ohms           = 486,
 156         .pressure_max           = 1000,
 157         .pressure_min           = 0,
 158         .stopacq_polarity       = 1,
 159         .first_conversion_delay = 3,
 160         .acquisition_time       = 1,
 161         .averaging              = 1,
 162         .pen_down_acc_interval  = 1,
 163 };
 164 #endif
 165
 166 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 167 #if defined(CONFIG_MTD_M25P80) \
 168         || defined(CONFIG_MTD_M25P80_MODULE)
 169         {
 170                 /* the modalias must be the same as spi device driver name */
 171                 .modalias = "m25p80", /* Name of spi_driver for this device */
 172                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 173                 .bus_num = 0, /* Framework bus number */
 174                 .chip_select = 2, /* SPI0_SSEL2 */
 175                 .platform_data = &bfin_spi_flash_data,
 176                 .controller_data = &spi_flash_chip_info,
 177                 .mode = SPI_MODE_3,
 178         },
 179 #endif
 180
 181 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 182         {
 183                 .modalias = "mmc_spi",
 184                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 185                 .bus_num = 0,
 186                 .chip_select = 5,
 187                 .controller_data = &mmc_spi_chip_info,
 188                 .mode = SPI_MODE_3,
 189         },
 190 #endif
 191 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
 192         {
 193                 .modalias               = "ad7877",
 194                 .platform_data          = &bfin_ad7877_ts_info,
 195                 .irq                    = IRQ_PF8,
 196                 .max_speed_hz   = 12500000,     /* max spi clock (SCK) speed in HZ */
 197                 .bus_num        = 0,
 198                 .chip_select  = 2,
 199         },
 200 #endif
 201 #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
 202          && defined(CONFIG_SND_SOC_WM8731_SPI)
 203         {
 204                 .modalias       = "wm8731",
 205                 .max_speed_hz   = 3125000,     /* max spi clock (SCK) speed in HZ */
 206                 .bus_num        = 0,
 207                 .chip_select    = 5,
 208                 .mode = SPI_MODE_0,
 209         },
 210 #endif
 211 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
 212         {
 213                 .modalias = "spidev",
 214                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 215                 .bus_num = 0,
 216                 .chip_select = 1,
 217         },
 218 #endif
 219 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
 220         {
 221                 .modalias = "bfin-lq035q1-spi",
 222                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 223                 .bus_num = 0,
 224                 .chip_select = 1,
 225                 .mode = SPI_CPHA | SPI_CPOL,
 226         },
 227 #endif
 228 };
 229
 230 /* SPI controller data */
 231 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 232 /* SPI (0) */
 233 static struct bfin5xx_spi_master bfin_spi0_info = {
 234         .num_chipselect = 6,
 235         .enable_dma = 1,  /* master has the ability to do dma transfer */
 236         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 237 };
 238
 239 static struct resource bfin_spi0_resource[] = {
 240         [0] = {
 241                 .start = SPI0_REGBASE,
 242                 .end   = SPI0_REGBASE + 0xFF,
 243                 .flags = IORESOURCE_MEM,
 244                 },
 245         [1] = {
 246                 .start = CH_SPI0,
 247                 .end   = CH_SPI0,
 248                 .flags = IORESOURCE_DMA,
 249         },
 250         [2] = {
 251                 .start = IRQ_SPI0,
 252                 .end   = IRQ_SPI0,
 253                 .flags = IORESOURCE_IRQ,
 254         },
 255 };
 256
 257 static struct platform_device bfin_spi0_device = {
 258         .name = "bfin-spi",
 259         .id = 0, /* Bus number */
 260         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 261         .resource = bfin_spi0_resource,
 262         .dev = {
 263                 .platform_data = &bfin_spi0_info, /* Passed to driver */
 264         },
 265 };
 266
 267 /* SPI (1) */
 268 static struct bfin5xx_spi_master bfin_spi1_info = {
 269         .num_chipselect = 6,
 270         .enable_dma = 1,  /* master has the ability to do dma transfer */
 271         .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
 272 };
 273
 274 static struct resource bfin_spi1_resource[] = {
 275         [0] = {
 276                 .start = SPI1_REGBASE,
 277                 .end   = SPI1_REGBASE + 0xFF,
 278                 .flags = IORESOURCE_MEM,
 279                 },
 280         [1] = {
 281                 .start = CH_SPI1,
 282                 .end   = CH_SPI1,
 283                 .flags = IORESOURCE_DMA,
 284         },
 285         [2] = {
 286                 .start = IRQ_SPI1,
 287                 .end   = IRQ_SPI1,
 288                 .flags = IORESOURCE_IRQ,
 289         },
 290 };
 291
 292 static struct platform_device bfin_spi1_device = {
 293         .name = "bfin-spi",
 294         .id = 1, /* Bus number */
 295         .num_resources = ARRAY_SIZE(bfin_spi1_resource),
 296         .resource = bfin_spi1_resource,
 297         .dev = {
 298                 .platform_data = &bfin_spi1_info, /* Passed to driver */
 299         },
 300 };
 301 #endif  /* spi master and devices */
 302
 303 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 304 #ifdef CONFIG_SERIAL_BFIN_UART0
 305 static struct resource bfin_uart0_resources[] = {
 306         {
 307                 .start = UART0_THR,
 308                 .end = UART0_GCTL+2,
 309                 .flags = IORESOURCE_MEM,
 310         },
 311         {
 312                 .start = IRQ_UART0_RX,
 313                 .end = IRQ_UART0_RX+1,
 314                 .flags = IORESOURCE_IRQ,
 315         },
 316         {
 317                 .start = IRQ_UART0_ERROR,
 318                 .end = IRQ_UART0_ERROR,
 319                 .flags = IORESOURCE_IRQ,
 320         },
 321         {
 322                 .start = CH_UART0_TX,
 323                 .end = CH_UART0_TX,
 324                 .flags = IORESOURCE_DMA,
 325         },
 326         {
 327                 .start = CH_UART0_RX,
 328                 .end = CH_UART0_RX,
 329                 .flags = IORESOURCE_DMA,
 330         },
 331 };
 332
 333 static unsigned short bfin_uart0_peripherals[] = {
 334         P_UART0_TX, P_UART0_RX, 0
 335 };
 336
 337 static struct platform_device bfin_uart0_device = {
 338         .name = "bfin-uart",
 339         .id = 0,
 340         .num_resources = ARRAY_SIZE(bfin_uart0_resources),
 341         .resource = bfin_uart0_resources,
 342         .dev = {
 343                 .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
 344         },
 345 };
 346 #endif
 347 #ifdef CONFIG_SERIAL_BFIN_UART1
 348 static struct resource bfin_uart1_resources[] = {
 349         {
 350                 .start = UART1_THR,
 351                 .end = UART1_GCTL+2,
 352                 .flags = IORESOURCE_MEM,
 353         },
 354         {
 355                 .start = IRQ_UART1_RX,
 356                 .end = IRQ_UART1_RX+1,
 357                 .flags = IORESOURCE_IRQ,
 358         },
 359         {
 360                 .start = IRQ_UART1_ERROR,
 361                 .end = IRQ_UART1_ERROR,
 362                 .flags = IORESOURCE_IRQ,
 363         },
 364         {
 365                 .start = CH_UART1_TX,
 366                 .end = CH_UART1_TX,
 367                 .flags = IORESOURCE_DMA,
 368         },
 369         {
 370                 .start = CH_UART1_RX,
 371                 .end = CH_UART1_RX,
 372                 .flags = IORESOURCE_DMA,
 373         },
 374 };
 375
 376 static unsigned short bfin_uart1_peripherals[] = {
 377         P_UART1_TX, P_UART1_RX, 0
 378 };
 379
 380 static struct platform_device bfin_uart1_device = {
 381         .name = "bfin-uart",
 382         .id = 1,
 383         .num_resources = ARRAY_SIZE(bfin_uart1_resources),
 384         .resource = bfin_uart1_resources,
 385         .dev = {
 386                 .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
 387         },
 388 };
 389 #endif
 390 #endif
 391
 392 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 393 #ifdef CONFIG_BFIN_SIR0
 394 static struct resource bfin_sir0_resources[] = {
 395         {
 396                 .start = 0xFFC00400,
 397                 .end = 0xFFC004FF,
 398                 .flags = IORESOURCE_MEM,
 399         },
 400         {
 401                 .start = IRQ_UART0_RX,
 402                 .end = IRQ_UART0_RX+1,
 403                 .flags = IORESOURCE_IRQ,
 404         },
 405         {
 406                 .start = CH_UART0_RX,
 407                 .end = CH_UART0_RX+1,
 408                 .flags = IORESOURCE_DMA,
 409         },
 410 };
 411
 412 static struct platform_device bfin_sir0_device = {
 413         .name = "bfin_sir",
 414         .id = 0,
 415         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 416         .resource = bfin_sir0_resources,
 417 };
 418 #endif
 419 #ifdef CONFIG_BFIN_SIR1
 420 static struct resource bfin_sir1_resources[] = {
 421         {
 422                 .start = 0xFFC02000,
 423                 .end = 0xFFC020FF,
 424                 .flags = IORESOURCE_MEM,
 425         },
 426         {
 427                 .start = IRQ_UART1_RX,
 428                 .end = IRQ_UART1_RX+1,
 429                 .flags = IORESOURCE_IRQ,
 430         },
 431         {
 432                 .start = CH_UART1_RX,
 433                 .end = CH_UART1_RX+1,
 434                 .flags = IORESOURCE_DMA,
 435         },
 436 };
 437
 438 static struct platform_device bfin_sir1_device = {
 439         .name = "bfin_sir",
 440         .id = 1,
 441         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 442         .resource = bfin_sir1_resources,
 443 };
 444 #endif
 445 #endif
 446
 447 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 448 static struct resource bfin_twi0_resource[] = {
 449         [0] = {
 450                 .start = TWI0_REGBASE,
 451                 .end   = TWI0_REGBASE,
 452                 .flags = IORESOURCE_MEM,
 453         },
 454         [1] = {
 455                 .start = IRQ_TWI,
 456                 .end   = IRQ_TWI,
 457                 .flags = IORESOURCE_IRQ,
 458         },
 459 };
 460
 461 static struct platform_device i2c_bfin_twi_device = {
 462         .name = "i2c-bfin-twi",
 463         .id = 0,
 464         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
 465         .resource = bfin_twi0_resource,
 466 };
 467 #endif
 468
 469 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
 470 #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
 471         {
 472                 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 473         },
 474 #endif
 475 #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
 476         {
 477                 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
 478                 .irq = IRQ_PF8,
 479         },
 480 #endif
 481 };
 482
 483 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 484 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 485 static struct resource bfin_sport0_uart_resources[] = {
 486         {
 487                 .start = SPORT0_TCR1,
 488                 .end = SPORT0_MRCS3+4,
 489                 .flags = IORESOURCE_MEM,
 490         },
 491         {
 492                 .start = IRQ_SPORT0_RX,
 493                 .end = IRQ_SPORT0_RX+1,
 494                 .flags = IORESOURCE_IRQ,
 495         },
 496         {
 497                 .start = IRQ_SPORT0_ERROR,
 498                 .end = IRQ_SPORT0_ERROR,
 499                 .flags = IORESOURCE_IRQ,
 500         },
 501 };
 502
 503 static unsigned short bfin_sport0_peripherals[] = {
 504         P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
 505         P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
 506 };
 507
 508 static struct platform_device bfin_sport0_uart_device = {
 509         .name = "bfin-sport-uart",
 510         .id = 0,
 511         .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
 512         .resource = bfin_sport0_uart_resources,
 513         .dev = {
 514                 .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
 515         },
 516 };
 517 #endif
 518 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 519 static struct resource bfin_sport1_uart_resources[] = {
 520         {
 521                 .start = SPORT1_TCR1,
 522                 .end = SPORT1_MRCS3+4,
 523                 .flags = IORESOURCE_MEM,
 524         },
 525         {
 526                 .start = IRQ_SPORT1_RX,
 527                 .end = IRQ_SPORT1_RX+1,
 528                 .flags = IORESOURCE_IRQ,
 529         },
 530         {
 531                 .start = IRQ_SPORT1_ERROR,
 532                 .end = IRQ_SPORT1_ERROR,
 533                 .flags = IORESOURCE_IRQ,
 534         },
 535 };
 536
 537 static unsigned short bfin_sport1_peripherals[] = {
 538         P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
 539         P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
 540 };
 541
 542 static struct platform_device bfin_sport1_uart_device = {
 543         .name = "bfin-sport-uart",
 544         .id = 1,
 545         .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
 546         .resource = bfin_sport1_uart_resources,
 547         .dev = {
 548                 .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
 549         },
 550 };
 551 #endif
 552 #endif
 553
 554 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 555 #include <linux/input.h>
 556 #include <linux/gpio_keys.h>
 557
 558 static struct gpio_keys_button bfin_gpio_keys_table[] = {
 559         {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
 560         {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
 561 };
 562
 563 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
 564         .buttons        = bfin_gpio_keys_table,
 565         .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
 566 };
 567
 568 static struct platform_device bfin_device_gpiokeys = {
 569         .name      = "gpio-keys",
 570         .dev = {
 571                 .platform_data = &bfin_gpio_keys_data,
 572         },
 573 };
 574 #endif
 575
 576 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
 577
 578 static struct bfin_sd_host bfin_sdh_data = {
 579         .dma_chan = CH_RSI,
 580         .irq_int0 = IRQ_RSI_INT0,
 581         .pin_req = {P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0},
 582 };
 583
 584 static struct platform_device bf51x_sdh_device = {
 585         .name = "bfin-sdh",
 586         .id = 0,
 587         .dev = {
 588                 .platform_data = &bfin_sdh_data,
 589         },
 590 };
 591 #endif
 592
 593 static const unsigned int cclk_vlev_datasheet[] =
 594 {
 595         VRPAIR(VLEV_100, 400000000),
 596         VRPAIR(VLEV_105, 426000000),
 597         VRPAIR(VLEV_110, 500000000),
 598         VRPAIR(VLEV_115, 533000000),
 599         VRPAIR(VLEV_120, 600000000),
 600 };
 601
 602 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
 603         .tuple_tab = cclk_vlev_datasheet,
 604         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
 605         .vr_settling_time = 25 /* us */,
 606 };
 607
 608 static struct platform_device bfin_dpmc = {
 609         .name = "bfin dpmc",
 610         .dev = {
 611                 .platform_data = &bfin_dmpc_vreg_data,
 612         },
 613 };
 614
 615 static struct platform_device *tcm_devices[] __initdata = {
 616
 617         &bfin_dpmc,
 618
 619 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 620         &rtc_device,
 621 #endif
 622
 623 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 624         &bfin_mii_bus,
 625         &bfin_mac_device,
 626 #endif
 627
 628 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 629         &bfin_spi0_device,
 630         &bfin_spi1_device,
 631 #endif
 632
 633 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 634 #ifdef CONFIG_SERIAL_BFIN_UART0
 635         &bfin_uart0_device,
 636 #endif
 637 #ifdef CONFIG_SERIAL_BFIN_UART1
 638         &bfin_uart1_device,
 639 #endif
 640 #endif
 641
 642 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 643 #ifdef CONFIG_BFIN_SIR0
 644         &bfin_sir0_device,
 645 #endif
 646 #ifdef CONFIG_BFIN_SIR1
 647         &bfin_sir1_device,
 648 #endif
 649 #endif
 650
 651 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 652         &i2c_bfin_twi_device,
 653 #endif
 654
 655 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 656 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 657         &bfin_sport0_uart_device,
 658 #endif
 659 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 660         &bfin_sport1_uart_device,
 661 #endif
 662 #endif
 663
 664 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 665         &bfin_device_gpiokeys,
 666 #endif
 667
 668 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
 669         &bf51x_sdh_device,
 670 #endif
 671
 672 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 673         &tcm_flash_device,
 674 #endif
 675 };
 676
 677 static int __init tcm_init(void)
 678 {
 679         printk(KERN_INFO "%s(): registering device resources\n", __func__);
 680         i2c_register_board_info(0, bfin_i2c_board_info,
 681                                 ARRAY_SIZE(bfin_i2c_board_info));
 682         platform_add_devices(tcm_devices, ARRAY_SIZE(tcm_devices));
 683         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 684         return 0;
 685 }
 686
 687 arch_initcall(tcm_init);
 688
 689 static struct platform_device *tcm_early_devices[] __initdata = {
 690 #if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
 691 #ifdef CONFIG_SERIAL_BFIN_UART0
 692         &bfin_uart0_device,
 693 #endif
 694 #ifdef CONFIG_SERIAL_BFIN_UART1
 695         &bfin_uart1_device,
 696 #endif
 697 #endif
 698
 699 #if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
 700 #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
 701         &bfin_sport0_uart_device,
 702 #endif
 703 #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
 704         &bfin_sport1_uart_device,
 705 #endif
 706 #endif
 707 };
 708
 709 void __init native_machine_early_platform_add_devices(void)
 710 {
 711         printk(KERN_INFO "register early platform devices\n");
 712         early_platform_add_devices(tcm_early_devices,
 713                 ARRAY_SIZE(tcm_early_devices));
 714 }
 715
 716 void native_machine_restart(char *cmd)
 717 {
 718         /* workaround reboot hang when booting from SPI */
 719         if ((bfin_read_SYSCR() & 0x7) == 0x3)
 720                 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
 721 }
 722
 723 void bfin_get_ether_addr(char *addr)
 724 {
 725         random_ether_addr(addr);
 726         printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
 727 }
 728 EXPORT_SYMBOL(bfin_get_ether_addr);