Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
[pandora-kernel.git] / arch / arm / plat-omap / include / plat / mmc.h
1 /*
2  * MMC definitions for OMAP2
3  *
4  * Copyright (C) 2006 Nokia Corporation
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10
11 #ifndef __OMAP2_MMC_H
12 #define __OMAP2_MMC_H
13
14 #include <linux/types.h>
15 #include <linux/device.h>
16 #include <linux/mmc/host.h>
17
18 #include <plat/board.h>
19
20 #define OMAP15XX_NR_MMC         1
21 #define OMAP16XX_NR_MMC         2
22 #define OMAP1_MMC_SIZE          0x080
23 #define OMAP1_MMC1_BASE         0xfffb7800
24 #define OMAP1_MMC2_BASE         0xfffb7c00      /* omap16xx only */
25
26 #define OMAP24XX_NR_MMC         2
27 #define OMAP2420_MMC_SIZE       OMAP1_MMC_SIZE
28 #define OMAP2_MMC1_BASE         0x4809c000
29
30 #define OMAP4_MMC_REG_OFFSET    0x100
31
32 #define OMAP_MMC_MAX_SLOTS      2
33
34 /*
35  * struct omap_mmc_dev_attr.flags possibilities
36  *
37  * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can
38  *    operate with either 1.8Vdc or 3.0Vdc card voltages; this flag
39  *    should be set if this is the case.  See for example Section 22.5.3
40  *    "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia
41  *    Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R).
42  *
43  * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers
44  *    don't work correctly on some MMC controller instances on some
45  *    OMAP3 SoCs; this flag should be set if this is the case.  See
46  *    for example Advisory 2.1.1.128 "MMC: Multiple Block Read
47  *    Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_
48  *    Revision F (October 2010) (SPRZ278F).
49  */
50 #define OMAP_HSMMC_SUPPORTS_DUAL_VOLT           BIT(0)
51 #define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ       BIT(1)
52
53 struct omap_mmc_dev_attr {
54         u8 flags;
55 };
56
57 struct omap_mmc_platform_data {
58         /* back-link to device */
59         struct device *dev;
60
61         /* number of slots per controller */
62         unsigned nr_slots:2;
63
64         /* set if your board has components or wiring that limits the
65          * maximum frequency on the MMC bus */
66         unsigned int max_freq;
67
68         /* switch the bus to a new slot */
69         int (*switch_slot)(struct device *dev, int slot);
70         /* initialize board-specific MMC functionality, can be NULL if
71          * not supported */
72         int (*init)(struct device *dev);
73         void (*cleanup)(struct device *dev);
74         void (*shutdown)(struct device *dev);
75
76         /* To handle board related suspend/resume functionality for MMC */
77         int (*suspend)(struct device *dev, int slot);
78         int (*resume)(struct device *dev, int slot);
79
80         /* Return context loss count due to PM states changing */
81         int (*get_context_loss_count)(struct device *dev);
82
83         u64 dma_mask;
84
85         /* Integrating attributes from the omap_hwmod layer */
86         u8 controller_flags;
87
88         /* Register offset deviation */
89         u16 reg_offset;
90
91         struct omap_mmc_slot_data {
92
93                 /*
94                  * 4/8 wires and any additional host capabilities
95                  * need to OR'd all capabilities (ref. linux/mmc/host.h)
96                  */
97                 u8  wires;      /* Used for the MMC driver on omap1 and 2420 */
98                 u32 caps;       /* Used for the MMC driver on 2430 and later */
99
100                 /*
101                  * nomux means "standard" muxing is wrong on this board, and
102                  * that board-specific code handled it before common init logic.
103                  */
104                 unsigned nomux:1;
105
106                 /* switch pin can be for card detect (default) or card cover */
107                 unsigned cover:1;
108
109                 /* use the internal clock */
110                 unsigned internal_clock:1;
111
112                 /* nonremovable e.g. eMMC */
113                 unsigned nonremovable:1;
114
115                 /* Try to sleep or power off when possible */
116                 unsigned power_saving:1;
117
118                 /* If using power_saving and the MMC power is not to go off */
119                 unsigned no_off:1;
120
121                 /* eMMC does not handle power off when not in sleep state */
122                 unsigned no_regulator_off_init:1;
123
124                 /* Regulator off remapped to sleep */
125                 unsigned vcc_aux_disable_is_sleep:1;
126
127                 /* we can put the features above into this variable */
128 #define HSMMC_HAS_PBIAS         (1 << 0)
129 #define HSMMC_HAS_UPDATED_RESET (1 << 1)
130                 unsigned features;
131
132                 int switch_pin;                 /* gpio (card detect) */
133                 int gpio_wp;                    /* gpio (write protect) */
134
135                 int (*set_bus_mode)(struct device *dev, int slot, int bus_mode);
136                 int (*set_power)(struct device *dev, int slot,
137                                  int power_on, int vdd);
138                 int (*get_ro)(struct device *dev, int slot);
139                 int (*set_sleep)(struct device *dev, int slot, int sleep,
140                                  int vdd, int cardsleep);
141                 void (*remux)(struct device *dev, int slot, int power_on);
142                 /* Call back before enabling / disabling regulators */
143                 void (*before_set_reg)(struct device *dev, int slot,
144                                        int power_on, int vdd);
145                 /* Call back after enabling / disabling regulators */
146                 void (*after_set_reg)(struct device *dev, int slot,
147                                       int power_on, int vdd);
148                 /* if we have special card, init it using this callback */
149                 void (*init_card)(struct mmc_card *card);
150
151                 /* return MMC cover switch state, can be NULL if not supported.
152                  *
153                  * possible return values:
154                  *   0 - closed
155                  *   1 - open
156                  */
157                 int (*get_cover_state)(struct device *dev, int slot);
158
159                 const char *name;
160                 u32 ocr_mask;
161
162                 /* Card detection IRQs */
163                 int card_detect_irq;
164                 int (*card_detect)(struct device *dev, int slot);
165
166                 unsigned int ban_openended:1;
167
168         } slots[OMAP_MMC_MAX_SLOTS];
169 };
170
171 /* called from board-specific card detection service routine */
172 extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
173                                         int is_closed);
174
175 #if     defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
176         defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
177 void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
178                                 int nr_controllers);
179 void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
180 int omap_mmc_add(const char *name, int id, unsigned long base,
181                                 unsigned long size, unsigned int irq,
182                                 struct omap_mmc_platform_data *data);
183 #else
184 static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
185                                 int nr_controllers)
186 {
187 }
188 static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
189 {
190 }
191 static inline int omap_mmc_add(const char *name, int id, unsigned long base,
192                                 unsigned long size, unsigned int irq,
193                                 struct omap_mmc_platform_data *data)
194 {
195         return 0;
196 }
197
198 #endif
199 #endif