arch/arm/plat-omap/dma.c

   1 /*
   2  * linux/arch/arm/plat-omap/dma.c
   3  *
   4  * Copyright (C) 2003 Nokia Corporation
   5  * Author: Juha Yrjölä <juha.yrjola@nokia.com>
   6  * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
   7  * Graphics DMA and LCD DMA graphics tranformations
   8  * by Imre Deak <imre.deak@nokia.com>
   9  * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
  10  * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
  11  * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
  12  *
  13  * Support functions for the OMAP internal DMA channels.
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License version 2 as
  17  * published by the Free Software Foundation.
  18  *
  19  */
  20
  21 #include <linux/module.h>
  22 #include <linux/init.h>
  23 #include <linux/sched.h>
  24 #include <linux/spinlock.h>
  25 #include <linux/errno.h>
  26 #include <linux/interrupt.h>
  27 #include <linux/irq.h>
  28
  29 #include <asm/system.h>
  30 #include <asm/hardware.h>
  31 #include <asm/dma.h>
  32 #include <asm/io.h>
  33
  34 #include <asm/arch/tc.h>
  35
  36 #undef DEBUG
  37
  38 #ifndef CONFIG_ARCH_OMAP1
  39 enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
  40         DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED
  41 };
  42
  43 enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
  44 #endif
  45
  46 #define OMAP_DMA_ACTIVE         0x01
  47 #define OMAP_DMA_CCR_EN         (1 << 7)
  48 #define OMAP2_DMA_CSR_CLEAR_MASK        0xffe
  49
  50 #define OMAP_FUNC_MUX_ARM_BASE  (0xfffe1000 + 0xec)
  51
  52 static int enable_1510_mode = 0;
  53
  54 struct omap_dma_lch {
  55         int next_lch;
  56         int dev_id;
  57         u16 saved_csr;
  58         u16 enabled_irqs;
  59         const char *dev_name;
  60         void (* callback)(int lch, u16 ch_status, void *data);
  61         void *data;
  62
  63 #ifndef CONFIG_ARCH_OMAP1
  64         /* required for Dynamic chaining */
  65         int prev_linked_ch;
  66         int next_linked_ch;
  67         int state;
  68         int chain_id;
  69
  70         int status;
  71 #endif
  72         long flags;
  73 };
  74
  75 #ifndef CONFIG_ARCH_OMAP1
  76 struct dma_link_info {
  77         int *linked_dmach_q;
  78         int no_of_lchs_linked;
  79
  80         int q_count;
  81         int q_tail;
  82         int q_head;
  83
  84         int chain_state;
  85         int chain_mode;
  86
  87 };
  88
  89 static struct dma_link_info dma_linked_lch[OMAP_LOGICAL_DMA_CH_COUNT];
  90
  91 /* Chain handling macros */
  92 #define OMAP_DMA_CHAIN_QINIT(chain_id)                                  \
  93         do {                                                            \
  94                 dma_linked_lch[chain_id].q_head =                       \
  95                 dma_linked_lch[chain_id].q_tail =                       \
  96                 dma_linked_lch[chain_id].q_count = 0;                   \
  97         } while (0)
  98 #define OMAP_DMA_CHAIN_QFULL(chain_id)                                  \
  99                 (dma_linked_lch[chain_id].no_of_lchs_linked ==          \
 100                 dma_linked_lch[chain_id].q_count)
 101 #define OMAP_DMA_CHAIN_QLAST(chain_id)                                  \
 102         do {                                                            \
 103                 ((dma_linked_lch[chain_id].no_of_lchs_linked-1) ==      \
 104                 dma_linked_lch[chain_id].q_count)                       \
 105         } while (0)
 106 #define OMAP_DMA_CHAIN_QEMPTY(chain_id)                                 \
 107                 (0 == dma_linked_lch[chain_id].q_count)
 108 #define __OMAP_DMA_CHAIN_INCQ(end)                                      \
 109         ((end) = ((end)+1) % dma_linked_lch[chain_id].no_of_lchs_linked)
 110 #define OMAP_DMA_CHAIN_INCQHEAD(chain_id)                               \
 111         do {                                                            \
 112                 __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_head); \
 113                 dma_linked_lch[chain_id].q_count--;                     \
 114         } while (0)
 115
 116 #define OMAP_DMA_CHAIN_INCQTAIL(chain_id)                               \
 117         do {                                                            \
 118                 __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_tail); \
 119                 dma_linked_lch[chain_id].q_count++; \
 120         } while (0)
 121 #endif
 122 static int dma_chan_count;
 123
 124 static spinlock_t dma_chan_lock;
 125 static struct omap_dma_lch dma_chan[OMAP_LOGICAL_DMA_CH_COUNT];
 126
 127 static const u8 omap1_dma_irq[OMAP_LOGICAL_DMA_CH_COUNT] = {
 128         INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3,
 129         INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7,
 130         INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10,
 131         INT_1610_DMA_CH11, INT_1610_DMA_CH12, INT_1610_DMA_CH13,
 132         INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD
 133 };
 134
 135 static inline void disable_lnk(int lch);
 136 static void omap_disable_channel_irq(int lch);
 137 static inline void omap_enable_channel_irq(int lch);
 138
 139 #define REVISIT_24XX()          printk(KERN_ERR "FIXME: no %s on 24xx\n", \
 140                                                 __func__);
 141
 142 #ifdef CONFIG_ARCH_OMAP15XX
 143 /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
 144 int omap_dma_in_1510_mode(void)
 145 {
 146         return enable_1510_mode;
 147 }
 148 #else
 149 #define omap_dma_in_1510_mode()         0
 150 #endif
 151
 152 #ifdef CONFIG_ARCH_OMAP1
 153 static inline int get_gdma_dev(int req)
 154 {
 155         u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
 156         int shift = ((req - 1) % 5) * 6;
 157
 158         return ((omap_readl(reg) >> shift) & 0x3f) + 1;
 159 }
 160
 161 static inline void set_gdma_dev(int req, int dev)
 162 {
 163         u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
 164         int shift = ((req - 1) % 5) * 6;
 165         u32 l;
 166
 167         l = omap_readl(reg);
 168         l &= ~(0x3f << shift);
 169         l |= (dev - 1) << shift;
 170         omap_writel(l, reg);
 171 }
 172 #else
 173 #define set_gdma_dev(req, dev)  do {} while (0)
 174 #endif
 175
 176 static void clear_lch_regs(int lch)
 177 {
 178         int i;
 179         u32 lch_base = OMAP_DMA_BASE + lch * 0x40;
 180
 181         for (i = 0; i < 0x2c; i += 2)
 182                 omap_writew(0, lch_base + i);
 183 }
 184
 185 void omap_set_dma_priority(int lch, int dst_port, int priority)
 186 {
 187         unsigned long reg;
 188         u32 l;
 189
 190         if (cpu_class_is_omap1()) {
 191                 switch (dst_port) {
 192                 case OMAP_DMA_PORT_OCP_T1:      /* FFFECC00 */
 193                         reg = OMAP_TC_OCPT1_PRIOR;
 194                         break;
 195                 case OMAP_DMA_PORT_OCP_T2:      /* FFFECCD0 */
 196                         reg = OMAP_TC_OCPT2_PRIOR;
 197                         break;
 198                 case OMAP_DMA_PORT_EMIFF:       /* FFFECC08 */
 199                         reg = OMAP_TC_EMIFF_PRIOR;
 200                         break;
 201                 case OMAP_DMA_PORT_EMIFS:       /* FFFECC04 */
 202                         reg = OMAP_TC_EMIFS_PRIOR;
 203                         break;
 204                 default:
 205                         BUG();
 206                         return;
 207                 }
 208                 l = omap_readl(reg);
 209                 l &= ~(0xf << 8);
 210                 l |= (priority & 0xf) << 8;
 211                 omap_writel(l, reg);
 212         }
 213
 214         if (cpu_class_is_omap2()) {
 215                 if (priority)
 216                         OMAP_DMA_CCR_REG(lch) |= (1 << 6);
 217                 else
 218                         OMAP_DMA_CCR_REG(lch) &= ~(1 << 6);
 219         }
 220 }
 221
 222 void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
 223                                   int frame_count, int sync_mode,
 224                                   int dma_trigger, int src_or_dst_synch)
 225 {
 226         OMAP_DMA_CSDP_REG(lch) &= ~0x03;
 227         OMAP_DMA_CSDP_REG(lch) |= data_type;
 228
 229         if (cpu_class_is_omap1()) {
 230                 OMAP_DMA_CCR_REG(lch) &= ~(1 << 5);
 231                 if (sync_mode == OMAP_DMA_SYNC_FRAME)
 232                         OMAP_DMA_CCR_REG(lch) |= 1 << 5;
 233
 234                 OMAP1_DMA_CCR2_REG(lch) &= ~(1 << 2);
 235                 if (sync_mode == OMAP_DMA_SYNC_BLOCK)
 236                         OMAP1_DMA_CCR2_REG(lch) |= 1 << 2;
 237         }
 238
 239         if (cpu_class_is_omap2() && dma_trigger) {
 240                 u32 val = OMAP_DMA_CCR_REG(lch);
 241
 242                 val &= ~(3 << 19);
 243                 if (dma_trigger > 63)
 244                         val |= 1 << 20;
 245                 if (dma_trigger > 31)
 246                         val |= 1 << 19;
 247
 248                 val &= ~(0x1f);
 249                 val |= (dma_trigger & 0x1f);
 250
 251                 if (sync_mode & OMAP_DMA_SYNC_FRAME)
 252                         val |= 1 << 5;
 253                 else
 254                         val &= ~(1 << 5);
 255
 256                 if (sync_mode & OMAP_DMA_SYNC_BLOCK)
 257                         val |= 1 << 18;
 258                 else
 259                         val &= ~(1 << 18);
 260
 261                 if (src_or_dst_synch)
 262                         val |= 1 << 24;         /* source synch */
 263                 else
 264                         val &= ~(1 << 24);      /* dest synch */
 265
 266                 OMAP_DMA_CCR_REG(lch) = val;
 267         }
 268
 269         OMAP_DMA_CEN_REG(lch) = elem_count;
 270         OMAP_DMA_CFN_REG(lch) = frame_count;
 271 }
 272
 273 void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 274 {
 275         u16 w;
 276
 277         BUG_ON(omap_dma_in_1510_mode());
 278
 279         if (cpu_class_is_omap2()) {
 280                 REVISIT_24XX();
 281                 return;
 282         }
 283
 284         w = OMAP1_DMA_CCR2_REG(lch) & ~0x03;
 285         switch (mode) {
 286         case OMAP_DMA_CONSTANT_FILL:
 287                 w |= 0x01;
 288                 break;
 289         case OMAP_DMA_TRANSPARENT_COPY:
 290                 w |= 0x02;
 291                 break;
 292         case OMAP_DMA_COLOR_DIS:
 293                 break;
 294         default:
 295                 BUG();
 296         }
 297         OMAP1_DMA_CCR2_REG(lch) = w;
 298
 299         w = OMAP1_DMA_LCH_CTRL_REG(lch) & ~0x0f;
 300         /* Default is channel type 2D */
 301         if (mode) {
 302                 OMAP1_DMA_COLOR_L_REG(lch) = (u16)color;
 303                 OMAP1_DMA_COLOR_U_REG(lch) = (u16)(color >> 16);
 304                 w |= 1;         /* Channel type G */
 305         }
 306         OMAP1_DMA_LCH_CTRL_REG(lch) = w;
 307 }
 308
 309 void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
 310 {
 311         if (cpu_class_is_omap2()) {
 312                 OMAP_DMA_CSDP_REG(lch) &= ~(0x3 << 16);
 313                 OMAP_DMA_CSDP_REG(lch) |= (mode << 16);
 314         }
 315 }
 316
 317 /* Note that src_port is only for omap1 */
 318 void omap_set_dma_src_params(int lch, int src_port, int src_amode,
 319                              unsigned long src_start,
 320                              int src_ei, int src_fi)
 321 {
 322         if (cpu_class_is_omap1()) {
 323                 OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 2);
 324                 OMAP_DMA_CSDP_REG(lch) |= src_port << 2;
 325         }
 326
 327         OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 12);
 328         OMAP_DMA_CCR_REG(lch) |= src_amode << 12;
 329
 330         if (cpu_class_is_omap1()) {
 331                 OMAP1_DMA_CSSA_U_REG(lch) = src_start >> 16;
 332                 OMAP1_DMA_CSSA_L_REG(lch) = src_start;
 333         }
 334
 335         if (cpu_class_is_omap2())
 336                 OMAP2_DMA_CSSA_REG(lch) = src_start;
 337
 338         OMAP_DMA_CSEI_REG(lch) = src_ei;
 339         OMAP_DMA_CSFI_REG(lch) = src_fi;
 340 }
 341
 342 void omap_set_dma_params(int lch, struct omap_dma_channel_params * params)
 343 {
 344         omap_set_dma_transfer_params(lch, params->data_type,
 345                                      params->elem_count, params->frame_count,
 346                                      params->sync_mode, params->trigger,
 347                                      params->src_or_dst_synch);
 348         omap_set_dma_src_params(lch, params->src_port,
 349                                 params->src_amode, params->src_start,
 350                                 params->src_ei, params->src_fi);
 351
 352         omap_set_dma_dest_params(lch, params->dst_port,
 353                                  params->dst_amode, params->dst_start,
 354                                  params->dst_ei, params->dst_fi);
 355         if (params->read_prio || params->write_prio)
 356                 omap_dma_set_prio_lch(lch, params->read_prio,
 357                                       params->write_prio);
 358 }
 359
 360 void omap_set_dma_src_index(int lch, int eidx, int fidx)
 361 {
 362         if (cpu_class_is_omap2()) {
 363                 REVISIT_24XX();
 364                 return;
 365         }
 366         OMAP_DMA_CSEI_REG(lch) = eidx;
 367         OMAP_DMA_CSFI_REG(lch) = fidx;
 368 }
 369
 370 void omap_set_dma_src_data_pack(int lch, int enable)
 371 {
 372         OMAP_DMA_CSDP_REG(lch) &= ~(1 << 6);
 373         if (enable)
 374                 OMAP_DMA_CSDP_REG(lch) |= (1 << 6);
 375 }
 376
 377 void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 378 {
 379         unsigned int burst = 0;
 380         OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 7);
 381
 382         switch (burst_mode) {
 383         case OMAP_DMA_DATA_BURST_DIS:
 384                 break;
 385         case OMAP_DMA_DATA_BURST_4:
 386                 if (cpu_class_is_omap2())
 387                         burst = 0x1;
 388                 else
 389                         burst = 0x2;
 390                 break;
 391         case OMAP_DMA_DATA_BURST_8:
 392                 if (cpu_class_is_omap2()) {
 393                         burst = 0x2;
 394                         break;
 395                 }
 396                 /* not supported by current hardware on OMAP1
 397                  * w |= (0x03 << 7);
 398                  * fall through
 399                  */
 400         case OMAP_DMA_DATA_BURST_16:
 401                 if (cpu_class_is_omap2()) {
 402                         burst = 0x3;
 403                         break;
 404                 }
 405                 /* OMAP1 don't support burst 16
 406                  * fall through
 407                  */
 408         default:
 409                 BUG();
 410         }
 411         OMAP_DMA_CSDP_REG(lch) |= (burst << 7);
 412 }
 413
 414 /* Note that dest_port is only for OMAP1 */
 415 void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
 416                               unsigned long dest_start,
 417                               int dst_ei, int dst_fi)
 418 {
 419         if (cpu_class_is_omap1()) {
 420                 OMAP_DMA_CSDP_REG(lch) &= ~(0x1f << 9);
 421                 OMAP_DMA_CSDP_REG(lch) |= dest_port << 9;
 422         }
 423
 424         OMAP_DMA_CCR_REG(lch) &= ~(0x03 << 14);
 425         OMAP_DMA_CCR_REG(lch) |= dest_amode << 14;
 426
 427         if (cpu_class_is_omap1()) {
 428                 OMAP1_DMA_CDSA_U_REG(lch) = dest_start >> 16;
 429                 OMAP1_DMA_CDSA_L_REG(lch) = dest_start;
 430         }
 431
 432         if (cpu_class_is_omap2())
 433                 OMAP2_DMA_CDSA_REG(lch) = dest_start;
 434
 435         OMAP_DMA_CDEI_REG(lch) = dst_ei;
 436         OMAP_DMA_CDFI_REG(lch) = dst_fi;
 437 }
 438
 439 void omap_set_dma_dest_index(int lch, int eidx, int fidx)
 440 {
 441         if (cpu_class_is_omap2()) {
 442                 REVISIT_24XX();
 443                 return;
 444         }
 445         OMAP_DMA_CDEI_REG(lch) = eidx;
 446         OMAP_DMA_CDFI_REG(lch) = fidx;
 447 }
 448
 449 void omap_set_dma_dest_data_pack(int lch, int enable)
 450 {
 451         OMAP_DMA_CSDP_REG(lch) &= ~(1 << 13);
 452         if (enable)
 453                 OMAP_DMA_CSDP_REG(lch) |= 1 << 13;
 454 }
 455
 456 void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 457 {
 458         unsigned int burst = 0;
 459         OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 14);
 460
 461         switch (burst_mode) {
 462         case OMAP_DMA_DATA_BURST_DIS:
 463                 break;
 464         case OMAP_DMA_DATA_BURST_4:
 465                 if (cpu_class_is_omap2())
 466                         burst = 0x1;
 467                 else
 468                         burst = 0x2;
 469                 break;
 470         case OMAP_DMA_DATA_BURST_8:
 471                 if (cpu_class_is_omap2())
 472                         burst = 0x2;
 473                 else
 474                         burst = 0x3;
 475                 break;
 476         case OMAP_DMA_DATA_BURST_16:
 477                 if (cpu_class_is_omap2()) {
 478                         burst = 0x3;
 479                         break;
 480                 }
 481                 /* OMAP1 don't support burst 16
 482                  * fall through
 483                  */
 484         default:
 485                 printk(KERN_ERR "Invalid DMA burst mode\n");
 486                 BUG();
 487                 return;
 488         }
 489         OMAP_DMA_CSDP_REG(lch) |= (burst << 14);
 490 }
 491
 492 static inline void omap_enable_channel_irq(int lch)
 493 {
 494         u32 status;
 495
 496         /* Clear CSR */
 497         if (cpu_class_is_omap1())
 498                 status = OMAP_DMA_CSR_REG(lch);
 499         else if (cpu_class_is_omap2())
 500                 OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
 501
 502         /* Enable some nice interrupts. */
 503         OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
 504 }
 505
 506 static void omap_disable_channel_irq(int lch)
 507 {
 508         if (cpu_class_is_omap2())
 509                 OMAP_DMA_CICR_REG(lch) = 0;
 510 }
 511
 512 void omap_enable_dma_irq(int lch, u16 bits)
 513 {
 514         dma_chan[lch].enabled_irqs |= bits;
 515 }
 516
 517 void omap_disable_dma_irq(int lch, u16 bits)
 518 {
 519         dma_chan[lch].enabled_irqs &= ~bits;
 520 }
 521
 522 static inline void enable_lnk(int lch)
 523 {
 524         if (cpu_class_is_omap1())
 525                 OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 14);
 526
 527         /* Set the ENABLE_LNK bits */
 528         if (dma_chan[lch].next_lch != -1)
 529                 OMAP_DMA_CLNK_CTRL_REG(lch) =
 530                         dma_chan[lch].next_lch | (1 << 15);
 531
 532 #ifndef CONFIG_ARCH_OMAP1
 533         if (dma_chan[lch].next_linked_ch != -1)
 534                 OMAP_DMA_CLNK_CTRL_REG(lch) =
 535                         dma_chan[lch].next_linked_ch | (1 << 15);
 536 #endif
 537 }
 538
 539 static inline void disable_lnk(int lch)
 540 {
 541         /* Disable interrupts */
 542         if (cpu_class_is_omap1()) {
 543                 OMAP_DMA_CICR_REG(lch) = 0;
 544                 /* Set the STOP_LNK bit */
 545                 OMAP_DMA_CLNK_CTRL_REG(lch) |= 1 << 14;
 546         }
 547
 548         if (cpu_class_is_omap2()) {
 549                 omap_disable_channel_irq(lch);
 550                 /* Clear the ENABLE_LNK bit */
 551                 OMAP_DMA_CLNK_CTRL_REG(lch) &= ~(1 << 15);
 552         }
 553
 554         dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 555 }
 556
 557 static inline void omap2_enable_irq_lch(int lch)
 558 {
 559         u32 val;
 560
 561         if (!cpu_class_is_omap2())
 562                 return;
 563
 564         val = omap_readl(OMAP_DMA4_IRQENABLE_L0);
 565         val |= 1 << lch;
 566         omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
 567 }
 568
 569 int omap_request_dma(int dev_id, const char *dev_name,
 570                      void (* callback)(int lch, u16 ch_status, void *data),
 571                      void *data, int *dma_ch_out)
 572 {
 573         int ch, free_ch = -1;
 574         unsigned long flags;
 575         struct omap_dma_lch *chan;
 576
 577         spin_lock_irqsave(&dma_chan_lock, flags);
 578         for (ch = 0; ch < dma_chan_count; ch++) {
 579                 if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
 580                         free_ch = ch;
 581                         if (dev_id == 0)
 582                                 break;
 583                 }
 584         }
 585         if (free_ch == -1) {
 586                 spin_unlock_irqrestore(&dma_chan_lock, flags);
 587                 return -EBUSY;
 588         }
 589         chan = dma_chan + free_ch;
 590         chan->dev_id = dev_id;
 591
 592         if (cpu_class_is_omap1())
 593                 clear_lch_regs(free_ch);
 594
 595         if (cpu_class_is_omap2())
 596                 omap_clear_dma(free_ch);
 597
 598         spin_unlock_irqrestore(&dma_chan_lock, flags);
 599
 600         chan->dev_name = dev_name;
 601         chan->callback = callback;
 602         chan->data = data;
 603 #ifndef CONFIG_ARCH_OMAP1
 604         chan->chain_id = -1;
 605         chan->next_linked_ch = -1;
 606 #endif
 607         chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
 608
 609         if (cpu_class_is_omap1())
 610                 chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
 611         else if (cpu_class_is_omap2())
 612                 chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
 613                         OMAP2_DMA_TRANS_ERR_IRQ;
 614
 615         if (cpu_is_omap16xx()) {
 616                 /* If the sync device is set, configure it dynamically. */
 617                 if (dev_id != 0) {
 618                         set_gdma_dev(free_ch + 1, dev_id);
 619                         dev_id = free_ch + 1;
 620                 }
 621                 /* Disable the 1510 compatibility mode and set the sync device
 622                  * id. */
 623                 OMAP_DMA_CCR_REG(free_ch) = dev_id | (1 << 10);
 624         } else if (cpu_is_omap730() || cpu_is_omap15xx()) {
 625                 OMAP_DMA_CCR_REG(free_ch) = dev_id;
 626         }
 627
 628         if (cpu_class_is_omap2()) {
 629                 omap2_enable_irq_lch(free_ch);
 630
 631                 omap_enable_channel_irq(free_ch);
 632                 /* Clear the CSR register and IRQ status register */
 633                 OMAP_DMA_CSR_REG(free_ch) = OMAP2_DMA_CSR_CLEAR_MASK;
 634                 omap_writel(1 << free_ch, OMAP_DMA4_IRQSTATUS_L0);
 635         }
 636
 637         *dma_ch_out = free_ch;
 638
 639         return 0;
 640 }
 641
 642 void omap_free_dma(int lch)
 643 {
 644         unsigned long flags;
 645
 646         spin_lock_irqsave(&dma_chan_lock, flags);
 647         if (dma_chan[lch].dev_id == -1) {
 648                 printk("omap_dma: trying to free nonallocated DMA channel %d\n",
 649                        lch);
 650                 spin_unlock_irqrestore(&dma_chan_lock, flags);
 651                 return;
 652         }
 653         dma_chan[lch].dev_id = -1;
 654         dma_chan[lch].next_lch = -1;
 655         dma_chan[lch].callback = NULL;
 656         spin_unlock_irqrestore(&dma_chan_lock, flags);
 657
 658         if (cpu_class_is_omap1()) {
 659                 /* Disable all DMA interrupts for the channel. */
 660                 OMAP_DMA_CICR_REG(lch) = 0;
 661                 /* Make sure the DMA transfer is stopped. */
 662                 OMAP_DMA_CCR_REG(lch) = 0;
 663         }
 664
 665         if (cpu_class_is_omap2()) {
 666                 u32 val;
 667                 /* Disable interrupts */
 668                 val = omap_readl(OMAP_DMA4_IRQENABLE_L0);
 669                 val &= ~(1 << lch);
 670                 omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
 671
 672                 /* Clear the CSR register and IRQ status register */
 673                 OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
 674                 omap_writel(1 << lch, OMAP_DMA4_IRQSTATUS_L0);
 675
 676                 /* Disable all DMA interrupts for the channel. */
 677                 OMAP_DMA_CICR_REG(lch) = 0;
 678
 679                 /* Make sure the DMA transfer is stopped. */
 680                 OMAP_DMA_CCR_REG(lch) = 0;
 681                 omap_clear_dma(lch);
 682         }
 683 }
 684
 685 /**
 686  * @brief omap_dma_set_global_params : Set global priority settings for dma
 687  *
 688  * @param arb_rate
 689  * @param max_fifo_depth
 690  * @param tparams - Number of thereads to reserve : DMA_THREAD_RESERVE_NORM
 691  *                                                  DMA_THREAD_RESERVE_ONET
 692  *                                                  DMA_THREAD_RESERVE_TWOT
 693  *                                                  DMA_THREAD_RESERVE_THREET
 694  */
 695 void
 696 omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
 697 {
 698         u32 reg;
 699
 700         if (!cpu_class_is_omap2()) {
 701                 printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
 702                 return;
 703         }
 704
 705         if (arb_rate == 0)
 706                 arb_rate = 1;
 707
 708         reg = (arb_rate & 0xff) << 16;
 709         reg |= (0xff & max_fifo_depth);
 710
 711         omap_writel(reg, OMAP_DMA4_GCR_REG);
 712 }
 713 EXPORT_SYMBOL(omap_dma_set_global_params);
 714
 715 /**
 716  * @brief omap_dma_set_prio_lch : Set channel wise priority settings
 717  *
 718  * @param lch
 719  * @param read_prio - Read priority
 720  * @param write_prio - Write priority
 721  * Both of the above can be set with one of the following values :
 722  *      DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW
 723  */
 724 int
 725 omap_dma_set_prio_lch(int lch, unsigned char read_prio,
 726                       unsigned char write_prio)
 727 {
 728         u32 w;
 729
 730         if (unlikely((lch < 0 || lch >= OMAP_LOGICAL_DMA_CH_COUNT))) {
 731                 printk(KERN_ERR "Invalid channel id\n");
 732                 return -EINVAL;
 733         }
 734         w = OMAP_DMA_CCR_REG(lch);
 735         w &= ~((1 << 6) | (1 << 26));
 736         if (cpu_is_omap2430() || cpu_is_omap34xx())
 737                 w |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
 738         else
 739                 w |= ((read_prio & 0x1) << 6);
 740
 741         OMAP_DMA_CCR_REG(lch) = w;
 742         return 0;
 743 }
 744 EXPORT_SYMBOL(omap_dma_set_prio_lch);
 745
 746 /*
 747  * Clears any DMA state so the DMA engine is ready to restart with new buffers
 748  * through omap_start_dma(). Any buffers in flight are discarded.
 749  */
 750 void omap_clear_dma(int lch)
 751 {
 752         unsigned long flags;
 753
 754         local_irq_save(flags);
 755
 756         if (cpu_class_is_omap1()) {
 757                 int status;
 758                 OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN;
 759
 760                 /* Clear pending interrupts */
 761                 status = OMAP_DMA_CSR_REG(lch);
 762         }
 763
 764         if (cpu_class_is_omap2()) {
 765                 int i;
 766                 u32 lch_base = OMAP_DMA4_BASE + lch * 0x60 + 0x80;
 767                 for (i = 0; i < 0x44; i += 4)
 768                         omap_writel(0, lch_base + i);
 769         }
 770
 771         local_irq_restore(flags);
 772 }
 773
 774 void omap_start_dma(int lch)
 775 {
 776         if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 777                 int next_lch, cur_lch;
 778                 char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT];
 779
 780                 dma_chan_link_map[lch] = 1;
 781                 /* Set the link register of the first channel */
 782                 enable_lnk(lch);
 783
 784                 memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
 785                 cur_lch = dma_chan[lch].next_lch;
 786                 do {
 787                         next_lch = dma_chan[cur_lch].next_lch;
 788
 789                         /* The loop case: we've been here already */
 790                         if (dma_chan_link_map[cur_lch])
 791                                 break;
 792                         /* Mark the current channel */
 793                         dma_chan_link_map[cur_lch] = 1;
 794
 795                         enable_lnk(cur_lch);
 796                         omap_enable_channel_irq(cur_lch);
 797
 798                         cur_lch = next_lch;
 799                 } while (next_lch != -1);
 800         } else if (cpu_class_is_omap2()) {
 801                 /* Errata: Need to write lch even if not using chaining */
 802                 OMAP_DMA_CLNK_CTRL_REG(lch) = lch;
 803         }
 804
 805         omap_enable_channel_irq(lch);
 806
 807         /* Errata: On ES2.0 BUFFERING disable must be set.
 808          * This will always fail on ES1.0 */
 809         if (cpu_is_omap24xx()) {
 810                 OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN;
 811         }
 812
 813         OMAP_DMA_CCR_REG(lch) |= OMAP_DMA_CCR_EN;
 814
 815         dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
 816 }
 817
 818 void omap_stop_dma(int lch)
 819 {
 820         if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 821                 int next_lch, cur_lch = lch;
 822                 char dma_chan_link_map[OMAP_LOGICAL_DMA_CH_COUNT];
 823
 824                 memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
 825                 do {
 826                         /* The loop case: we've been here already */
 827                         if (dma_chan_link_map[cur_lch])
 828                                 break;
 829                         /* Mark the current channel */
 830                         dma_chan_link_map[cur_lch] = 1;
 831
 832                         disable_lnk(cur_lch);
 833
 834                         next_lch = dma_chan[cur_lch].next_lch;
 835                         cur_lch = next_lch;
 836                 } while (next_lch != -1);
 837
 838                 return;
 839         }
 840
 841         /* Disable all interrupts on the channel */
 842         if (cpu_class_is_omap1())
 843                 OMAP_DMA_CICR_REG(lch) = 0;
 844
 845         OMAP_DMA_CCR_REG(lch) &= ~OMAP_DMA_CCR_EN;
 846         dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 847 }
 848
 849 /*
 850  * Allows changing the DMA callback function or data. This may be needed if
 851  * the driver shares a single DMA channel for multiple dma triggers.
 852  */
 853 int omap_set_dma_callback(int lch,
 854                           void (* callback)(int lch, u16 ch_status, void *data),
 855                           void *data)
 856 {
 857         unsigned long flags;
 858
 859         if (lch < 0)
 860                 return -ENODEV;
 861
 862         spin_lock_irqsave(&dma_chan_lock, flags);
 863         if (dma_chan[lch].dev_id == -1) {
 864                 printk(KERN_ERR "DMA callback for not set for free channel\n");
 865                 spin_unlock_irqrestore(&dma_chan_lock, flags);
 866                 return -EINVAL;
 867         }
 868         dma_chan[lch].callback = callback;
 869         dma_chan[lch].data = data;
 870         spin_unlock_irqrestore(&dma_chan_lock, flags);
 871
 872         return 0;
 873 }
 874
 875 /*
 876  * Returns current physical source address for the given DMA channel.
 877  * If the channel is running the caller must disable interrupts prior calling
 878  * this function and process the returned value before re-enabling interrupt to
 879  * prevent races with the interrupt handler. Note that in continuous mode there
 880  * is a chance for CSSA_L register overflow inbetween the two reads resulting
 881  * in incorrect return value.
 882  */
 883 dma_addr_t omap_get_dma_src_pos(int lch)
 884 {
 885         dma_addr_t offset = 0;
 886
 887         if (cpu_class_is_omap1())
 888                 offset = (dma_addr_t) (OMAP1_DMA_CSSA_L_REG(lch) |
 889                                        (OMAP1_DMA_CSSA_U_REG(lch) << 16));
 890
 891         if (cpu_class_is_omap2())
 892                 offset = OMAP_DMA_CSAC_REG(lch);
 893
 894         return offset;
 895 }
 896
 897 /*
 898  * Returns current physical destination address for the given DMA channel.
 899  * If the channel is running the caller must disable interrupts prior calling
 900  * this function and process the returned value before re-enabling interrupt to
 901  * prevent races with the interrupt handler. Note that in continuous mode there
 902  * is a chance for CDSA_L register overflow inbetween the two reads resulting
 903  * in incorrect return value.
 904  */
 905 dma_addr_t omap_get_dma_dst_pos(int lch)
 906 {
 907         dma_addr_t offset = 0;
 908
 909         if (cpu_class_is_omap1())
 910                 offset = (dma_addr_t) (OMAP1_DMA_CDSA_L_REG(lch) |
 911                                        (OMAP1_DMA_CDSA_U_REG(lch) << 16));
 912
 913         if (cpu_class_is_omap2())
 914                 offset = OMAP_DMA_CDAC_REG(lch);
 915
 916         return offset;
 917 }
 918
 919 /*
 920  * Returns current source transfer counting for the given DMA channel.
 921  * Can be used to monitor the progress of a transfer inside a block.
 922  * It must be called with disabled interrupts.
 923  */
 924 int omap_get_dma_src_addr_counter(int lch)
 925 {
 926         return (dma_addr_t) OMAP_DMA_CSAC_REG(lch);
 927 }
 928
 929 int omap_dma_running(void)
 930 {
 931         int lch;
 932
 933         /* Check if LCD DMA is running */
 934         if (cpu_is_omap16xx())
 935                 if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
 936                         return 1;
 937
 938         for (lch = 0; lch < dma_chan_count; lch++)
 939                 if (OMAP_DMA_CCR_REG(lch) & OMAP_DMA_CCR_EN)
 940                         return 1;
 941
 942         return 0;
 943 }
 944
 945 /*
 946  * lch_queue DMA will start right after lch_head one is finished.
 947  * For this DMA link to start, you still need to start (see omap_start_dma)
 948  * the first one. That will fire up the entire queue.
 949  */
 950 void omap_dma_link_lch (int lch_head, int lch_queue)
 951 {
 952         if (omap_dma_in_1510_mode()) {
 953                 printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
 954                 BUG();
 955                 return;
 956         }
 957
 958         if ((dma_chan[lch_head].dev_id == -1) ||
 959             (dma_chan[lch_queue].dev_id == -1)) {
 960                 printk(KERN_ERR "omap_dma: trying to link "
 961                        "non requested channels\n");
 962                 dump_stack();
 963         }
 964
 965         dma_chan[lch_head].next_lch = lch_queue;
 966 }
 967
 968 /*
 969  * Once the DMA queue is stopped, we can destroy it.
 970  */
 971 void omap_dma_unlink_lch (int lch_head, int lch_queue)
 972 {
 973         if (omap_dma_in_1510_mode()) {
 974                 printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
 975                 BUG();
 976                 return;
 977         }
 978
 979         if (dma_chan[lch_head].next_lch != lch_queue ||
 980             dma_chan[lch_head].next_lch == -1) {
 981                 printk(KERN_ERR "omap_dma: trying to unlink "
 982                        "non linked channels\n");
 983                 dump_stack();
 984         }
 985
 986
 987         if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
 988             (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
 989                 printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
 990                        "before unlinking\n");
 991                 dump_stack();
 992         }
 993
 994         dma_chan[lch_head].next_lch = -1;
 995 }
 996
 997 #ifndef CONFIG_ARCH_OMAP1
 998 /* Create chain of DMA channesls */
 999 static void create_dma_lch_chain(int lch_head, int lch_queue)
1000 {
1001         u32 w;
1002
1003         /* Check if this is the first link in chain */
1004         if (dma_chan[lch_head].next_linked_ch == -1) {
1005                 dma_chan[lch_head].next_linked_ch = lch_queue;
1006                 dma_chan[lch_head].prev_linked_ch = lch_queue;
1007                 dma_chan[lch_queue].next_linked_ch = lch_head;
1008                 dma_chan[lch_queue].prev_linked_ch = lch_head;
1009         }
1010
1011         /* a link exists, link the new channel in circular chain */
1012         else {
1013                 dma_chan[lch_queue].next_linked_ch =
1014                                         dma_chan[lch_head].next_linked_ch;
1015                 dma_chan[lch_queue].prev_linked_ch = lch_head;
1016                 dma_chan[lch_head].next_linked_ch = lch_queue;
1017                 dma_chan[dma_chan[lch_queue].next_linked_ch].prev_linked_ch =
1018                                         lch_queue;
1019         }
1020
1021         w = OMAP_DMA_CLNK_CTRL_REG(lch_head);
1022         w &= ~(0x1f);
1023         w |= lch_queue;
1024         OMAP_DMA_CLNK_CTRL_REG(lch_head) = w;
1025
1026         w = OMAP_DMA_CLNK_CTRL_REG(lch_queue);
1027         w &= ~(0x1f);
1028         w |= (dma_chan[lch_queue].next_linked_ch);
1029         OMAP_DMA_CLNK_CTRL_REG(lch_queue) = w;
1030 }
1031
1032 /**
1033  * @brief omap_request_dma_chain : Request a chain of DMA channels
1034  *
1035  * @param dev_id - Device id using the dma channel
1036  * @param dev_name - Device name
1037  * @param callback - Call back function
1038  * @chain_id -
1039  * @no_of_chans - Number of channels requested
1040  * @chain_mode - Dynamic or static chaining : OMAP_DMA_STATIC_CHAIN
1041  *                                            OMAP_DMA_DYNAMIC_CHAIN
1042  * @params - Channel parameters
1043  *
1044  * @return - Succes : 0
1045  *           Failure: -EINVAL/-ENOMEM
1046  */
1047 int omap_request_dma_chain(int dev_id, const char *dev_name,
1048                            void (*callback) (int chain_id, u16 ch_status,
1049                                              void *data),
1050                            int *chain_id, int no_of_chans, int chain_mode,
1051                            struct omap_dma_channel_params params)
1052 {
1053         int *channels;
1054         int i, err;
1055
1056         /* Is the chain mode valid ? */
1057         if (chain_mode != OMAP_DMA_STATIC_CHAIN
1058                         && chain_mode != OMAP_DMA_DYNAMIC_CHAIN) {
1059                 printk(KERN_ERR "Invalid chain mode requested\n");
1060                 return -EINVAL;
1061         }
1062
1063         if (unlikely((no_of_chans < 1
1064                         || no_of_chans > OMAP_LOGICAL_DMA_CH_COUNT))) {
1065                 printk(KERN_ERR "Invalid Number of channels requested\n");
1066                 return -EINVAL;
1067         }
1068
1069         /* Allocate a queue to maintain the status of the channels
1070          * in the chain */
1071         channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL);
1072         if (channels == NULL) {
1073                 printk(KERN_ERR "omap_dma: No memory for channel queue\n");
1074                 return -ENOMEM;
1075         }
1076
1077         /* request and reserve DMA channels for the chain */
1078         for (i = 0; i < no_of_chans; i++) {
1079                 err = omap_request_dma(dev_id, dev_name,
1080                                         callback, 0, &channels[i]);
1081                 if (err < 0) {
1082                         int j;
1083                         for (j = 0; j < i; j++)
1084                                 omap_free_dma(channels[j]);
1085                         kfree(channels);
1086                         printk(KERN_ERR "omap_dma: Request failed %d\n", err);
1087                         return err;
1088                 }
1089                 dma_chan[channels[i]].prev_linked_ch = -1;
1090                 dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
1091
1092                 /*
1093                  * Allowing client drivers to set common parameters now,
1094                  * so that later only relevant (src_start, dest_start
1095                  * and element count) can be set
1096                  */
1097                 omap_set_dma_params(channels[i], &params);
1098         }
1099
1100         *chain_id = channels[0];
1101         dma_linked_lch[*chain_id].linked_dmach_q = channels;
1102         dma_linked_lch[*chain_id].chain_mode = chain_mode;
1103         dma_linked_lch[*chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
1104         dma_linked_lch[*chain_id].no_of_lchs_linked = no_of_chans;
1105
1106         for (i = 0; i < no_of_chans; i++)
1107                 dma_chan[channels[i]].chain_id = *chain_id;
1108
1109         /* Reset the Queue pointers */
1110         OMAP_DMA_CHAIN_QINIT(*chain_id);
1111
1112         /* Set up the chain */
1113         if (no_of_chans == 1)
1114                 create_dma_lch_chain(channels[0], channels[0]);
1115         else {
1116                 for (i = 0; i < (no_of_chans - 1); i++)
1117                         create_dma_lch_chain(channels[i], channels[i + 1]);
1118         }
1119         return 0;
1120 }
1121 EXPORT_SYMBOL(omap_request_dma_chain);
1122
1123 /**
1124  * @brief omap_modify_dma_chain_param : Modify the chain's params - Modify the
1125  * params after setting it. Dont do this while dma is running!!
1126  *
1127  * @param chain_id - Chained logical channel id.
1128  * @param params
1129  *
1130  * @return - Success : 0
1131  *           Failure : -EINVAL
1132  */
1133 int omap_modify_dma_chain_params(int chain_id,
1134                                 struct omap_dma_channel_params params)
1135 {
1136         int *channels;
1137         u32 i;
1138
1139         /* Check for input params */
1140         if (unlikely((chain_id < 0
1141                         || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
1142                 printk(KERN_ERR "Invalid chain id\n");
1143                 return -EINVAL;
1144         }
1145
1146         /* Check if the chain exists */
1147         if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1148                 printk(KERN_ERR "Chain doesn't exists\n");
1149                 return -EINVAL;
1150         }
1151         channels = dma_linked_lch[chain_id].linked_dmach_q;
1152
1153         for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
1154                 /*
1155                  * Allowing client drivers to set common parameters now,
1156                  * so that later only relevant (src_start, dest_start
1157                  * and element count) can be set
1158                  */
1159                 omap_set_dma_params(channels[i], &params);
1160         }
1161         return 0;
1162 }
1163 EXPORT_SYMBOL(omap_modify_dma_chain_params);
1164
1165 /**
1166  * @brief omap_free_dma_chain - Free all the logical channels in a chain.
1167  *
1168  * @param chain_id
1169  *
1170  * @return - Success : 0
1171  *           Failure : -EINVAL
1172  */
1173 int omap_free_dma_chain(int chain_id)
1174 {
1175         int *channels;
1176         u32 i;
1177
1178         /* Check for input params */
1179         if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
1180                 printk(KERN_ERR "Invalid chain id\n");
1181                 return -EINVAL;
1182         }
1183
1184         /* Check if the chain exists */
1185         if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1186                 printk(KERN_ERR "Chain doesn't exists\n");
1187                 return -EINVAL;
1188         }
1189
1190         channels = dma_linked_lch[chain_id].linked_dmach_q;
1191         for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
1192                 dma_chan[channels[i]].next_linked_ch = -1;
1193                 dma_chan[channels[i]].prev_linked_ch = -1;
1194                 dma_chan[channels[i]].chain_id = -1;
1195                 dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
1196                 omap_free_dma(channels[i]);
1197         }
1198
1199         kfree(channels);
1200
1201         dma_linked_lch[chain_id].linked_dmach_q = NULL;
1202         dma_linked_lch[chain_id].chain_mode = -1;
1203         dma_linked_lch[chain_id].chain_state = -1;
1204         return (0);
1205 }
1206 EXPORT_SYMBOL(omap_free_dma_chain);
1207
1208 /**
1209  * @brief omap_dma_chain_status - Check if the chain is in
1210  * active / inactive state.
1211  * @param chain_id
1212  *
1213  * @return - Success : OMAP_DMA_CHAIN_ACTIVE/OMAP_DMA_CHAIN_INACTIVE
1214  *           Failure : -EINVAL
1215  */
1216 int omap_dma_chain_status(int chain_id)
1217 {
1218         /* Check for input params */
1219         if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
1220                 printk(KERN_ERR "Invalid chain id\n");
1221                 return -EINVAL;
1222         }
1223
1224         /* Check if the chain exists */
1225         if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1226                 printk(KERN_ERR "Chain doesn't exists\n");
1227                 return -EINVAL;
1228         }
1229         pr_debug("CHAINID=%d, qcnt=%d\n", chain_id,
1230                         dma_linked_lch[chain_id].q_count);
1231
1232         if (OMAP_DMA_CHAIN_QEMPTY(chain_id))
1233                 return OMAP_DMA_CHAIN_INACTIVE;
1234         return OMAP_DMA_CHAIN_ACTIVE;
1235 }
1236 EXPORT_SYMBOL(omap_dma_chain_status);
1237
1238 /**
1239  * @brief omap_dma_chain_a_transfer - Get a free channel from a chain,
1240  * set the params and start the transfer.
1241  *
1242  * @param chain_id
1243  * @param src_start - buffer start address
1244  * @param dest_start - Dest address
1245  * @param elem_count
1246  * @param frame_count
1247  * @param callbk_data - channel callback parameter data.
1248  *
1249  * @return  - Success : 0
1250  *            Failure: -EINVAL/-EBUSY
1251  */
1252 int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
1253                         int elem_count, int frame_count, void *callbk_data)
1254 {
1255         int *channels;
1256         u32 w, lch;
1257         int start_dma = 0;
1258
1259         /* if buffer size is less than 1 then there is
1260          * no use of starting the chain */
1261         if (elem_count < 1) {
1262                 printk(KERN_ERR "Invalid buffer size\n");
1263                 return -EINVAL;
1264         }
1265
1266         /* Check for input params */
1267         if (unlikely((chain_id < 0
1268                         || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
1269                 printk(KERN_ERR "Invalid chain id\n");
1270                 return -EINVAL;
1271         }
1272
1273         /* Check if the chain exists */
1274         if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1275                 printk(KERN_ERR "Chain doesn't exist\n");
1276                 return -EINVAL;
1277         }
1278
1279         /* Check if all the channels in chain are in use */
1280         if (OMAP_DMA_CHAIN_QFULL(chain_id))
1281                 return -EBUSY;
1282
1283         /* Frame count may be negative in case of indexed transfers */
1284         channels = dma_linked_lch[chain_id].linked_dmach_q;
1285
1286         /* Get a free channel */
1287         lch = channels[dma_linked_lch[chain_id].q_tail];
1288
1289         /* Store the callback data */
1290         dma_chan[lch].data = callbk_data;
1291
1292         /* Increment the q_tail */
1293         OMAP_DMA_CHAIN_INCQTAIL(chain_id);
1294
1295         /* Set the params to the free channel */
1296         if (src_start != 0)
1297                 OMAP2_DMA_CSSA_REG(lch) = src_start;
1298         if (dest_start != 0)
1299                 OMAP2_DMA_CDSA_REG(lch) = dest_start;
1300
1301         /* Write the buffer size */
1302         OMAP_DMA_CEN_REG(lch) = elem_count;
1303         OMAP_DMA_CFN_REG(lch) = frame_count;
1304
1305         /* If the chain is dynamically linked,
1306          * then we may have to start the chain if its not active */
1307         if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) {
1308
1309                 /* In Dynamic chain, if the chain is not started,
1310                  * queue the channel */
1311                 if (dma_linked_lch[chain_id].chain_state ==
1312                                                 DMA_CHAIN_NOTSTARTED) {
1313                         /* Enable the link in previous channel */
1314                         if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
1315                                                                 DMA_CH_QUEUED)
1316                                 enable_lnk(dma_chan[lch].prev_linked_ch);
1317                         dma_chan[lch].state = DMA_CH_QUEUED;
1318                 }
1319
1320                 /* Chain is already started, make sure its active,
1321                  * if not then start the chain */
1322                 else {
1323                         start_dma = 1;
1324
1325                         if (dma_chan[dma_chan[lch].prev_linked_ch].state ==
1326                                                         DMA_CH_STARTED) {
1327                                 enable_lnk(dma_chan[lch].prev_linked_ch);
1328                                 dma_chan[lch].state = DMA_CH_QUEUED;
1329                                 start_dma = 0;
1330                                 if (0 == ((1 << 7) & (OMAP_DMA_CCR_REG
1331                                         (dma_chan[lch].prev_linked_ch)))) {
1332                                         disable_lnk(dma_chan[lch].
1333                                                     prev_linked_ch);
1334                                         pr_debug("\n prev ch is stopped\n");
1335                                         start_dma = 1;
1336                                 }
1337                         }
1338
1339                         else if (dma_chan[dma_chan[lch].prev_linked_ch].state
1340                                                         == DMA_CH_QUEUED) {
1341                                 enable_lnk(dma_chan[lch].prev_linked_ch);
1342                                 dma_chan[lch].state = DMA_CH_QUEUED;
1343                                 start_dma = 0;
1344                         }
1345                         omap_enable_channel_irq(lch);
1346
1347                         w = OMAP_DMA_CCR_REG(lch);
1348
1349                         if ((0 == (w & (1 << 24))))
1350                                 w &= ~(1 << 25);
1351                         else
1352                                 w |= (1 << 25);
1353                         if (start_dma == 1) {
1354                                 if (0 == (w & (1 << 7))) {
1355                                         w |= (1 << 7);
1356                                         dma_chan[lch].state = DMA_CH_STARTED;
1357                                         pr_debug("starting %d\n", lch);
1358                                         OMAP_DMA_CCR_REG(lch) = w;
1359                                 } else
1360                                         start_dma = 0;
1361                         } else {
1362                                 if (0 == (w & (1 << 7)))
1363                                         OMAP_DMA_CCR_REG(lch) = w;
1364                         }
1365                         dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
1366                 }
1367         }
1368         return 0;
1369 }
1370 EXPORT_SYMBOL(omap_dma_chain_a_transfer);
1371
1372 /**
1373  * @brief omap_start_dma_chain_transfers - Start the chain
1374  *
1375  * @param chain_id
1376  *
1377  * @return - Success : 0
1378  *           Failure : -EINVAL/-EBUSY
1379  */
1380 int omap_start_dma_chain_transfers(int chain_id)
1381 {
1382         int *channels;
1383         u32 w, i;
1384
1385         if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
1386                 printk(KERN_ERR "Invalid chain id\n");
1387                 return -EINVAL;
1388         }
1389
1390         channels = dma_linked_lch[chain_id].linked_dmach_q;
1391
1392         if (dma_linked_lch[channels[0]].chain_state == DMA_CHAIN_STARTED) {
1393                 printk(KERN_ERR "Chain is already started\n");
1394                 return -EBUSY;
1395         }
1396
1397         if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_STATIC_CHAIN) {
1398                 for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked;
1399                                                                         i++) {
1400                         enable_lnk(channels[i]);
1401                         omap_enable_channel_irq(channels[i]);
1402                 }
1403         } else {
1404                 omap_enable_channel_irq(channels[0]);
1405         }
1406
1407         w = OMAP_DMA_CCR_REG(channels[0]);
1408         w |= (1 << 7);
1409         dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED;
1410         dma_chan[channels[0]].state = DMA_CH_STARTED;
1411
1412         if ((0 == (w & (1 << 24))))
1413                 w &= ~(1 << 25);
1414         else
1415                 w |= (1 << 25);
1416         OMAP_DMA_CCR_REG(channels[0]) = w;
1417
1418         dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE;
1419         return 0;
1420 }
1421 EXPORT_SYMBOL(omap_start_dma_chain_transfers);
1422
1423 /**
1424  * @brief omap_stop_dma_chain_transfers - Stop the dma transfer of a chain.
1425  *
1426  * @param chain_id
1427  *
1428  * @return - Success : 0
1429  *           Failure : EINVAL
1430  */
1431 int omap_stop_dma_chain_transfers(int chain_id)
1432 {
1433         int *channels;
1434         u32 w, i;
1435         u32 sys_cf;
1436
1437         /* Check for input params */
1438         if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
1439                 printk(KERN_ERR "Invalid chain id\n");
1440                 return -EINVAL;
1441         }
1442
1443         /* Check if the chain exists */
1444         if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1445                 printk(KERN_ERR "Chain doesn't exists\n");
1446                 return -EINVAL;
1447         }
1448         channels = dma_linked_lch[chain_id].linked_dmach_q;
1449
1450         /* DMA Errata:
1451          * Special programming model needed to disable DMA before end of block
1452          */
1453         sys_cf = omap_readl(OMAP_DMA4_OCP_SYSCONFIG);
1454         w = sys_cf;
1455         /* Middle mode reg set no Standby */
1456         w &= ~((1 << 12)|(1 << 13));
1457         omap_writel(w, OMAP_DMA4_OCP_SYSCONFIG);
1458
1459         for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
1460
1461                 /* Stop the Channel transmission */
1462                 w = OMAP_DMA_CCR_REG(channels[i]);
1463                 w &= ~(1 << 7);
1464                 OMAP_DMA_CCR_REG(channels[i]) = w;
1465
1466                 /* Disable the link in all the channels */
1467                 disable_lnk(channels[i]);
1468                 dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
1469
1470         }
1471         dma_linked_lch[chain_id].chain_state = DMA_CHAIN_NOTSTARTED;
1472
1473         /* Reset the Queue pointers */
1474         OMAP_DMA_CHAIN_QINIT(chain_id);
1475
1476         /* Errata - put in the old value */
1477         omap_writel(sys_cf, OMAP_DMA4_OCP_SYSCONFIG);
1478         return 0;
1479 }
1480 EXPORT_SYMBOL(omap_stop_dma_chain_transfers);
1481
1482 /* Get the index of the ongoing DMA in chain */
1483 /**
1484  * @brief omap_get_dma_chain_index - Get the element and frame index
1485  * of the ongoing DMA in chain
1486  *
1487  * @param chain_id
1488  * @param ei - Element index
1489  * @param fi - Frame index
1490  *
1491  * @return - Success : 0
1492  *           Failure : -EINVAL
1493  */
1494 int omap_get_dma_chain_index(int chain_id, int *ei, int *fi)
1495 {
1496         int lch;
1497         int *channels;
1498
1499         /* Check for input params */
1500         if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
1501                 printk(KERN_ERR "Invalid chain id\n");
1502                 return -EINVAL;
1503         }
1504
1505         /* Check if the chain exists */
1506         if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1507                 printk(KERN_ERR "Chain doesn't exists\n");
1508                 return -EINVAL;
1509         }
1510         if ((!ei) || (!fi))
1511                 return -EINVAL;
1512
1513         channels = dma_linked_lch[chain_id].linked_dmach_q;
1514
1515         /* Get the current channel */
1516         lch = channels[dma_linked_lch[chain_id].q_head];
1517
1518         *ei = OMAP2_DMA_CCEN_REG(lch);
1519         *fi = OMAP2_DMA_CCFN_REG(lch);
1520
1521         return 0;
1522 }
1523 EXPORT_SYMBOL(omap_get_dma_chain_index);
1524
1525 /**
1526  * @brief omap_get_dma_chain_dst_pos - Get the destination position of the
1527  * ongoing DMA in chain
1528  *
1529  * @param chain_id
1530  *
1531  * @return - Success : Destination position
1532  *           Failure : -EINVAL
1533  */
1534 int omap_get_dma_chain_dst_pos(int chain_id)
1535 {
1536         int lch;
1537         int *channels;
1538
1539         /* Check for input params */
1540         if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
1541                 printk(KERN_ERR "Invalid chain id\n");
1542                 return -EINVAL;
1543         }
1544
1545         /* Check if the chain exists */
1546         if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1547                 printk(KERN_ERR "Chain doesn't exists\n");
1548                 return -EINVAL;
1549         }
1550
1551         channels = dma_linked_lch[chain_id].linked_dmach_q;
1552
1553         /* Get the current channel */
1554         lch = channels[dma_linked_lch[chain_id].q_head];
1555
1556         return (OMAP_DMA_CDAC_REG(lch));
1557 }
1558 EXPORT_SYMBOL(omap_get_dma_chain_dst_pos);
1559
1560 /**
1561  * @brief omap_get_dma_chain_src_pos - Get the source position
1562  * of the ongoing DMA in chain
1563  * @param chain_id
1564  *
1565  * @return - Success : Destination position
1566  *           Failure : -EINVAL
1567  */
1568 int omap_get_dma_chain_src_pos(int chain_id)
1569 {
1570         int lch;
1571         int *channels;
1572
1573         /* Check for input params */
1574         if (unlikely((chain_id < 0 || chain_id >= OMAP_LOGICAL_DMA_CH_COUNT))) {
1575                 printk(KERN_ERR "Invalid chain id\n");
1576                 return -EINVAL;
1577         }
1578
1579         /* Check if the chain exists */
1580         if (dma_linked_lch[chain_id].linked_dmach_q == NULL) {
1581                 printk(KERN_ERR "Chain doesn't exists\n");
1582                 return -EINVAL;
1583         }
1584
1585         channels = dma_linked_lch[chain_id].linked_dmach_q;
1586
1587         /* Get the current channel */
1588         lch = channels[dma_linked_lch[chain_id].q_head];
1589
1590         return (OMAP_DMA_CSAC_REG(lch));
1591 }
1592 EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
1593 #endif
1594
1595 /*----------------------------------------------------------------------------*/
1596
1597 #ifdef CONFIG_ARCH_OMAP1
1598
1599 static int omap1_dma_handle_ch(int ch)
1600 {
1601         u16 csr;
1602
1603         if (enable_1510_mode && ch >= 6) {
1604                 csr = dma_chan[ch].saved_csr;
1605                 dma_chan[ch].saved_csr = 0;
1606         } else
1607                 csr = OMAP_DMA_CSR_REG(ch);
1608         if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
1609                 dma_chan[ch + 6].saved_csr = csr >> 7;
1610                 csr &= 0x7f;
1611         }
1612         if ((csr & 0x3f) == 0)
1613                 return 0;
1614         if (unlikely(dma_chan[ch].dev_id == -1)) {
1615                 printk(KERN_WARNING "Spurious interrupt from DMA channel "
1616                        "%d (CSR %04x)\n", ch, csr);
1617                 return 0;
1618         }
1619         if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
1620                 printk(KERN_WARNING "DMA timeout with device %d\n",
1621                        dma_chan[ch].dev_id);
1622         if (unlikely(csr & OMAP_DMA_DROP_IRQ))
1623                 printk(KERN_WARNING "DMA synchronization event drop occurred "
1624                        "with device %d\n", dma_chan[ch].dev_id);
1625         if (likely(csr & OMAP_DMA_BLOCK_IRQ))
1626                 dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
1627         if (likely(dma_chan[ch].callback != NULL))
1628                 dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
1629         return 1;
1630 }
1631
1632 static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
1633 {
1634         int ch = ((int) dev_id) - 1;
1635         int handled = 0;
1636
1637         for (;;) {
1638                 int handled_now = 0;
1639
1640                 handled_now += omap1_dma_handle_ch(ch);
1641                 if (enable_1510_mode && dma_chan[ch + 6].saved_csr)
1642                         handled_now += omap1_dma_handle_ch(ch + 6);
1643                 if (!handled_now)
1644                         break;
1645                 handled += handled_now;
1646         }
1647
1648         return handled ? IRQ_HANDLED : IRQ_NONE;
1649 }
1650
1651 #else
1652 #define omap1_dma_irq_handler   NULL
1653 #endif
1654
1655 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
1656
1657 static int omap2_dma_handle_ch(int ch)
1658 {
1659         u32 status = OMAP_DMA_CSR_REG(ch);
1660
1661         if (!status) {
1662                 if (printk_ratelimit())
1663                         printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n", ch);
1664                 omap_writel(1 << ch, OMAP_DMA4_IRQSTATUS_L0);
1665                 return 0;
1666         }
1667         if (unlikely(dma_chan[ch].dev_id == -1)) {
1668                 if (printk_ratelimit())
1669                         printk(KERN_WARNING "IRQ %04x for non-allocated DMA"
1670                                         "channel %d\n", status, ch);
1671                 return 0;
1672         }
1673         if (unlikely(status & OMAP_DMA_DROP_IRQ))
1674                 printk(KERN_INFO
1675                        "DMA synchronization event drop occurred with device "
1676                        "%d\n", dma_chan[ch].dev_id);
1677         if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ))
1678                 printk(KERN_INFO "DMA transaction error with device %d\n",
1679                        dma_chan[ch].dev_id);
1680         if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
1681                 printk(KERN_INFO "DMA secure error with device %d\n",
1682                        dma_chan[ch].dev_id);
1683         if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
1684                 printk(KERN_INFO "DMA misaligned error with device %d\n",
1685                        dma_chan[ch].dev_id);
1686
1687         OMAP_DMA_CSR_REG(ch) = OMAP2_DMA_CSR_CLEAR_MASK;
1688         omap_writel(1 << ch, OMAP_DMA4_IRQSTATUS_L0);
1689
1690         /* If the ch is not chained then chain_id will be -1 */
1691         if (dma_chan[ch].chain_id != -1) {
1692                 int chain_id = dma_chan[ch].chain_id;
1693                 dma_chan[ch].state = DMA_CH_NOTSTARTED;
1694                 if (OMAP_DMA_CLNK_CTRL_REG(ch) & (1 << 15))
1695                         dma_chan[dma_chan[ch].next_linked_ch].state =
1696                                                         DMA_CH_STARTED;
1697                 if (dma_linked_lch[chain_id].chain_mode ==
1698                                                 OMAP_DMA_DYNAMIC_CHAIN)
1699                         disable_lnk(ch);
1700
1701                 if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
1702                         OMAP_DMA_CHAIN_INCQHEAD(chain_id);
1703
1704                 status = OMAP_DMA_CSR_REG(ch);
1705         }
1706
1707         if (likely(dma_chan[ch].callback != NULL))
1708                 dma_chan[ch].callback(ch, status, dma_chan[ch].data);
1709
1710         OMAP_DMA_CSR_REG(ch) = status;
1711
1712         return 0;
1713 }
1714
1715 /* STATUS register count is from 1-32 while our is 0-31 */
1716 static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
1717 {
1718         u32 val;
1719         int i;
1720
1721         val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
1722         if (val == 0) {
1723                 if (printk_ratelimit())
1724                         printk(KERN_WARNING "Spurious DMA IRQ\n");
1725                 return IRQ_HANDLED;
1726         }
1727         for (i = 0; i < OMAP_LOGICAL_DMA_CH_COUNT && val != 0; i++) {
1728                 if (val & 1)
1729                         omap2_dma_handle_ch(i);
1730                 val >>= 1;
1731         }
1732
1733         return IRQ_HANDLED;
1734 }
1735
1736 static struct irqaction omap24xx_dma_irq = {
1737         .name = "DMA",
1738         .handler = omap2_dma_irq_handler,
1739         .flags = IRQF_DISABLED
1740 };
1741
1742 #else
1743 static struct irqaction omap24xx_dma_irq;
1744 #endif
1745
1746 /*----------------------------------------------------------------------------*/
1747
1748 static struct lcd_dma_info {
1749         spinlock_t lock;
1750         int reserved;
1751         void (* callback)(u16 status, void *data);
1752         void *cb_data;
1753
1754         int active;
1755         unsigned long addr, size;
1756         int rotate, data_type, xres, yres;
1757         int vxres;
1758         int mirror;
1759         int xscale, yscale;
1760         int ext_ctrl;
1761         int src_port;
1762         int single_transfer;
1763 } lcd_dma;
1764
1765 void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
1766                          int data_type)
1767 {
1768         lcd_dma.addr = addr;
1769         lcd_dma.data_type = data_type;
1770         lcd_dma.xres = fb_xres;
1771         lcd_dma.yres = fb_yres;
1772 }
1773
1774 void omap_set_lcd_dma_src_port(int port)
1775 {
1776         lcd_dma.src_port = port;
1777 }
1778
1779 void omap_set_lcd_dma_ext_controller(int external)
1780 {
1781         lcd_dma.ext_ctrl = external;
1782 }
1783
1784 void omap_set_lcd_dma_single_transfer(int single)
1785 {
1786         lcd_dma.single_transfer = single;
1787 }
1788
1789
1790 void omap_set_lcd_dma_b1_rotation(int rotate)
1791 {
1792         if (omap_dma_in_1510_mode()) {
1793                 printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
1794                 BUG();
1795                 return;
1796         }
1797         lcd_dma.rotate = rotate;
1798 }
1799
1800 void omap_set_lcd_dma_b1_mirror(int mirror)
1801 {
1802         if (omap_dma_in_1510_mode()) {
1803                 printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
1804                 BUG();
1805         }
1806         lcd_dma.mirror = mirror;
1807 }
1808
1809 void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
1810 {
1811         if (omap_dma_in_1510_mode()) {
1812                 printk(KERN_ERR "DMA virtual resulotion is not supported "
1813                                 "in 1510 mode\n");
1814                 BUG();
1815         }
1816         lcd_dma.vxres = vxres;
1817 }
1818
1819 void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
1820 {
1821         if (omap_dma_in_1510_mode()) {
1822                 printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
1823                 BUG();
1824         }
1825         lcd_dma.xscale = xscale;
1826         lcd_dma.yscale = yscale;
1827 }
1828
1829 static void set_b1_regs(void)
1830 {
1831         unsigned long top, bottom;
1832         int es;
1833         u16 w;
1834         unsigned long en, fn;
1835         long ei, fi;
1836         unsigned long vxres;
1837         unsigned int xscale, yscale;
1838
1839         switch (lcd_dma.data_type) {
1840         case OMAP_DMA_DATA_TYPE_S8:
1841                 es = 1;
1842                 break;
1843         case OMAP_DMA_DATA_TYPE_S16:
1844                 es = 2;
1845                 break;
1846         case OMAP_DMA_DATA_TYPE_S32:
1847                 es = 4;
1848                 break;
1849         default:
1850                 BUG();
1851                 return;
1852         }
1853
1854         vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
1855         xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
1856         yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
1857         BUG_ON(vxres < lcd_dma.xres);
1858 #define PIXADDR(x,y) (lcd_dma.addr + ((y) * vxres * yscale + (x) * xscale) * es)
1859 #define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
1860         switch (lcd_dma.rotate) {
1861         case 0:
1862                 if (!lcd_dma.mirror) {
1863                         top = PIXADDR(0, 0);
1864                         bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
1865                         /* 1510 DMA requires the bottom address to be 2 more
1866                          * than the actual last memory access location. */
1867                         if (omap_dma_in_1510_mode() &&
1868                             lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
1869                                 bottom += 2;
1870                         ei = PIXSTEP(0, 0, 1, 0);
1871                         fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
1872                 } else {
1873                         top = PIXADDR(lcd_dma.xres - 1, 0);
1874                         bottom = PIXADDR(0, lcd_dma.yres - 1);
1875                         ei = PIXSTEP(1, 0, 0, 0);
1876                         fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
1877                 }
1878                 en = lcd_dma.xres;
1879                 fn = lcd_dma.yres;
1880                 break;
1881         case 90:
1882                 if (!lcd_dma.mirror) {
1883                         top = PIXADDR(0, lcd_dma.yres - 1);
1884                         bottom = PIXADDR(lcd_dma.xres - 1, 0);
1885                         ei = PIXSTEP(0, 1, 0, 0);
1886                         fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
1887                 } else {
1888                         top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
1889                         bottom = PIXADDR(0, 0);
1890                         ei = PIXSTEP(0, 1, 0, 0);
1891                         fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
1892                 }
1893                 en = lcd_dma.yres;
1894                 fn = lcd_dma.xres;
1895                 break;
1896         case 180:
1897                 if (!lcd_dma.mirror) {
1898                         top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
1899                         bottom = PIXADDR(0, 0);
1900                         ei = PIXSTEP(1, 0, 0, 0);
1901                         fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
1902                 } else {
1903                         top = PIXADDR(0, lcd_dma.yres - 1);
1904                         bottom = PIXADDR(lcd_dma.xres - 1, 0);
1905                         ei = PIXSTEP(0, 0, 1, 0);
1906                         fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
1907                 }
1908                 en = lcd_dma.xres;
1909                 fn = lcd_dma.yres;
1910                 break;
1911         case 270:
1912                 if (!lcd_dma.mirror) {
1913                         top = PIXADDR(lcd_dma.xres - 1, 0);
1914                         bottom = PIXADDR(0, lcd_dma.yres - 1);
1915                         ei = PIXSTEP(0, 0, 0, 1);
1916                         fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
1917                 } else {
1918                         top = PIXADDR(0, 0);
1919                         bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
1920                         ei = PIXSTEP(0, 0, 0, 1);
1921                         fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
1922                 }
1923                 en = lcd_dma.yres;
1924                 fn = lcd_dma.xres;
1925                 break;
1926         default:
1927                 BUG();
1928                 return; /* Suppress warning about uninitialized vars */
1929         }
1930
1931         if (omap_dma_in_1510_mode()) {
1932                 omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
1933                 omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
1934                 omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
1935                 omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
1936
1937                 return;
1938         }
1939
1940         /* 1610 regs */
1941         omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
1942         omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
1943         omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
1944         omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
1945
1946         omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
1947         omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
1948
1949         w = omap_readw(OMAP1610_DMA_LCD_CSDP);
1950         w &= ~0x03;
1951         w |= lcd_dma.data_type;
1952         omap_writew(w, OMAP1610_DMA_LCD_CSDP);
1953
1954         w = omap_readw(OMAP1610_DMA_LCD_CTRL);
1955         /* Always set the source port as SDRAM for now*/
1956         w &= ~(0x03 << 6);
1957         if (lcd_dma.callback != NULL)
1958                 w |= 1 << 1;            /* Block interrupt enable */
1959         else
1960                 w &= ~(1 << 1);
1961         omap_writew(w, OMAP1610_DMA_LCD_CTRL);
1962
1963         if (!(lcd_dma.rotate || lcd_dma.mirror ||
1964               lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
1965                 return;
1966
1967         w = omap_readw(OMAP1610_DMA_LCD_CCR);
1968         /* Set the double-indexed addressing mode */
1969         w |= (0x03 << 12);
1970         omap_writew(w, OMAP1610_DMA_LCD_CCR);
1971
1972         omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
1973         omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
1974         omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
1975 }
1976
1977 static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
1978 {
1979         u16 w;
1980
1981         w = omap_readw(OMAP1610_DMA_LCD_CTRL);
1982         if (unlikely(!(w & (1 << 3)))) {
1983                 printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
1984                 return IRQ_NONE;
1985         }
1986         /* Ack the IRQ */
1987         w |= (1 << 3);
1988         omap_writew(w, OMAP1610_DMA_LCD_CTRL);
1989         lcd_dma.active = 0;
1990         if (lcd_dma.callback != NULL)
1991                 lcd_dma.callback(w, lcd_dma.cb_data);
1992
1993         return IRQ_HANDLED;
1994 }
1995
1996 int omap_request_lcd_dma(void (* callback)(u16 status, void *data),
1997                          void *data)
1998 {
1999         spin_lock_irq(&lcd_dma.lock);
2000         if (lcd_dma.reserved) {
2001                 spin_unlock_irq(&lcd_dma.lock);
2002                 printk(KERN_ERR "LCD DMA channel already reserved\n");
2003                 BUG();
2004                 return -EBUSY;
2005         }
2006         lcd_dma.reserved = 1;
2007         spin_unlock_irq(&lcd_dma.lock);
2008         lcd_dma.callback = callback;
2009         lcd_dma.cb_data = data;
2010         lcd_dma.active = 0;
2011         lcd_dma.single_transfer = 0;
2012         lcd_dma.rotate = 0;
2013         lcd_dma.vxres = 0;
2014         lcd_dma.mirror = 0;
2015         lcd_dma.xscale = 0;
2016         lcd_dma.yscale = 0;
2017         lcd_dma.ext_ctrl = 0;
2018         lcd_dma.src_port = 0;
2019
2020         return 0;
2021 }
2022
2023 void omap_free_lcd_dma(void)
2024 {
2025         spin_lock(&lcd_dma.lock);
2026         if (!lcd_dma.reserved) {
2027                 spin_unlock(&lcd_dma.lock);
2028                 printk(KERN_ERR "LCD DMA is not reserved\n");
2029                 BUG();
2030                 return;
2031         }
2032         if (!enable_1510_mode)
2033                 omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
2034                             OMAP1610_DMA_LCD_CCR);
2035         lcd_dma.reserved = 0;
2036         spin_unlock(&lcd_dma.lock);
2037 }
2038
2039 void omap_enable_lcd_dma(void)
2040 {
2041         u16 w;
2042
2043         /* Set the Enable bit only if an external controller is
2044          * connected. Otherwise the OMAP internal controller will
2045          * start the transfer when it gets enabled.
2046          */
2047         if (enable_1510_mode || !lcd_dma.ext_ctrl)
2048                 return;
2049
2050         w = omap_readw(OMAP1610_DMA_LCD_CTRL);
2051         w |= 1 << 8;
2052         omap_writew(w, OMAP1610_DMA_LCD_CTRL);
2053
2054         lcd_dma.active = 1;
2055
2056         w = omap_readw(OMAP1610_DMA_LCD_CCR);
2057         w |= 1 << 7;
2058         omap_writew(w, OMAP1610_DMA_LCD_CCR);
2059 }
2060
2061 void omap_setup_lcd_dma(void)
2062 {
2063         BUG_ON(lcd_dma.active);
2064         if (!enable_1510_mode) {
2065                 /* Set some reasonable defaults */
2066                 omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
2067                 omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
2068                 omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
2069         }
2070         set_b1_regs();
2071         if (!enable_1510_mode) {
2072                 u16 w;
2073
2074                 w = omap_readw(OMAP1610_DMA_LCD_CCR);
2075                 /* If DMA was already active set the end_prog bit to have
2076                  * the programmed register set loaded into the active
2077                  * register set.
2078                  */
2079                 w |= 1 << 11;           /* End_prog */
2080                 if (!lcd_dma.single_transfer)
2081                         w |= (3 << 8);  /* Auto_init, repeat */
2082                 omap_writew(w, OMAP1610_DMA_LCD_CCR);
2083         }
2084 }
2085
2086 void omap_stop_lcd_dma(void)
2087 {
2088         u16 w;
2089
2090         lcd_dma.active = 0;
2091         if (enable_1510_mode || !lcd_dma.ext_ctrl)
2092                 return;
2093
2094         w = omap_readw(OMAP1610_DMA_LCD_CCR);
2095         w &= ~(1 << 7);
2096         omap_writew(w, OMAP1610_DMA_LCD_CCR);
2097
2098         w = omap_readw(OMAP1610_DMA_LCD_CTRL);
2099         w &= ~(1 << 8);
2100         omap_writew(w, OMAP1610_DMA_LCD_CTRL);
2101 }
2102
2103 /*----------------------------------------------------------------------------*/
2104
2105 static int __init omap_init_dma(void)
2106 {
2107         int ch, r;
2108
2109         if (cpu_is_omap15xx()) {
2110                 printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
2111                 dma_chan_count = 9;
2112                 enable_1510_mode = 1;
2113         } else if (cpu_is_omap16xx() || cpu_is_omap730()) {
2114                 printk(KERN_INFO "OMAP DMA hardware version %d\n",
2115                        omap_readw(OMAP_DMA_HW_ID));
2116                 printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
2117                        (omap_readw(OMAP_DMA_CAPS_0_U) << 16) |
2118                        omap_readw(OMAP_DMA_CAPS_0_L),
2119                        (omap_readw(OMAP_DMA_CAPS_1_U) << 16) |
2120                        omap_readw(OMAP_DMA_CAPS_1_L),
2121                        omap_readw(OMAP_DMA_CAPS_2), omap_readw(OMAP_DMA_CAPS_3),
2122                        omap_readw(OMAP_DMA_CAPS_4));
2123                 if (!enable_1510_mode) {
2124                         u16 w;
2125
2126                         /* Disable OMAP 3.0/3.1 compatibility mode. */
2127                         w = omap_readw(OMAP_DMA_GSCR);
2128                         w |= 1 << 3;
2129                         omap_writew(w, OMAP_DMA_GSCR);
2130                         dma_chan_count = 16;
2131                 } else
2132                         dma_chan_count = 9;
2133                 if (cpu_is_omap16xx()) {
2134                         u16 w;
2135
2136                         /* this would prevent OMAP sleep */
2137                         w = omap_readw(OMAP1610_DMA_LCD_CTRL);
2138                         w &= ~(1 << 8);
2139                         omap_writew(w, OMAP1610_DMA_LCD_CTRL);
2140                 }
2141         } else if (cpu_class_is_omap2()) {
2142                 u8 revision = omap_readb(OMAP_DMA4_REVISION);
2143                 printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
2144                        revision >> 4, revision & 0xf);
2145                 dma_chan_count = OMAP_LOGICAL_DMA_CH_COUNT;
2146         } else {
2147                 dma_chan_count = 0;
2148                 return 0;
2149         }
2150
2151         memset(&lcd_dma, 0, sizeof(lcd_dma));
2152         spin_lock_init(&lcd_dma.lock);
2153         spin_lock_init(&dma_chan_lock);
2154         memset(&dma_chan, 0, sizeof(dma_chan));
2155
2156         for (ch = 0; ch < dma_chan_count; ch++) {
2157                 omap_clear_dma(ch);
2158                 dma_chan[ch].dev_id = -1;
2159                 dma_chan[ch].next_lch = -1;
2160
2161                 if (ch >= 6 && enable_1510_mode)
2162                         continue;
2163
2164                 if (cpu_class_is_omap1()) {
2165                         /* request_irq() doesn't like dev_id (ie. ch) being
2166                          * zero, so we have to kludge around this. */
2167                         r = request_irq(omap1_dma_irq[ch],
2168                                         omap1_dma_irq_handler, 0, "DMA",
2169                                         (void *) (ch + 1));
2170                         if (r != 0) {
2171                                 int i;
2172
2173                                 printk(KERN_ERR "unable to request IRQ %d "
2174                                        "for DMA (error %d)\n",
2175                                        omap1_dma_irq[ch], r);
2176                                 for (i = 0; i < ch; i++)
2177                                         free_irq(omap1_dma_irq[i],
2178                                                  (void *) (i + 1));
2179                                 return r;
2180                         }
2181                 }
2182         }
2183
2184         if (cpu_is_omap2430() || cpu_is_omap34xx())
2185                 omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
2186                                 DMA_DEFAULT_FIFO_DEPTH, 0);
2187
2188         if (cpu_class_is_omap2())
2189                 setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq);
2190
2191         /* FIXME: Update LCD DMA to work on 24xx */
2192         if (cpu_class_is_omap1()) {
2193                 r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
2194                                 "LCD DMA", NULL);
2195                 if (r != 0) {
2196                         int i;
2197
2198                         printk(KERN_ERR "unable to request IRQ for LCD DMA "
2199                                "(error %d)\n", r);
2200                         for (i = 0; i < dma_chan_count; i++)
2201                                 free_irq(omap1_dma_irq[i], (void *) (i + 1));
2202                         return r;
2203                 }
2204         }
2205
2206         return 0;
2207 }
2208
2209 arch_initcall(omap_init_dma);
2210
2211 EXPORT_SYMBOL(omap_get_dma_src_pos);
2212 EXPORT_SYMBOL(omap_get_dma_dst_pos);
2213 EXPORT_SYMBOL(omap_get_dma_src_addr_counter);
2214 EXPORT_SYMBOL(omap_clear_dma);
2215 EXPORT_SYMBOL(omap_set_dma_priority);
2216 EXPORT_SYMBOL(omap_request_dma);
2217 EXPORT_SYMBOL(omap_free_dma);
2218 EXPORT_SYMBOL(omap_start_dma);
2219 EXPORT_SYMBOL(omap_stop_dma);
2220 EXPORT_SYMBOL(omap_set_dma_callback);
2221 EXPORT_SYMBOL(omap_enable_dma_irq);
2222 EXPORT_SYMBOL(omap_disable_dma_irq);
2223
2224 EXPORT_SYMBOL(omap_set_dma_transfer_params);
2225 EXPORT_SYMBOL(omap_set_dma_color_mode);
2226 EXPORT_SYMBOL(omap_set_dma_write_mode);
2227
2228 EXPORT_SYMBOL(omap_set_dma_src_params);
2229 EXPORT_SYMBOL(omap_set_dma_src_index);
2230 EXPORT_SYMBOL(omap_set_dma_src_data_pack);
2231 EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
2232
2233 EXPORT_SYMBOL(omap_set_dma_dest_params);
2234 EXPORT_SYMBOL(omap_set_dma_dest_index);
2235 EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
2236 EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
2237
2238 EXPORT_SYMBOL(omap_set_dma_params);
2239
2240 EXPORT_SYMBOL(omap_dma_link_lch);
2241 EXPORT_SYMBOL(omap_dma_unlink_lch);
2242
2243 EXPORT_SYMBOL(omap_request_lcd_dma);
2244 EXPORT_SYMBOL(omap_free_lcd_dma);
2245 EXPORT_SYMBOL(omap_enable_lcd_dma);
2246 EXPORT_SYMBOL(omap_setup_lcd_dma);
2247 EXPORT_SYMBOL(omap_stop_lcd_dma);
2248 EXPORT_SYMBOL(omap_set_lcd_dma_b1);
2249 EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
2250 EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
2251 EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
2252 EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
2253 EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
2254 EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
2255