arch/arm/mach-s3c2412/clock.c

   1 /* linux/arch/arm/mach-s3c2412/clock.c
   2  *
   3  * Copyright (c) 2006 Simtec Electronics
   4  *      Ben Dooks <ben@simtec.co.uk>
   5  *
   6  * S3C2412,S3C2413 Clock control support
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  21 */
  22
  23 #include <linux/init.h>
  24 #include <linux/module.h>
  25 #include <linux/kernel.h>
  26 #include <linux/list.h>
  27 #include <linux/errno.h>
  28 #include <linux/err.h>
  29 #include <linux/sysdev.h>
  30 #include <linux/clk.h>
  31 #include <linux/mutex.h>
  32 #include <linux/delay.h>
  33 #include <linux/serial_core.h>
  34 #include <linux/io.h>
  35
  36 #include <asm/mach/map.h>
  37
  38 #include <mach/hardware.h>
  39
  40 #include <plat/regs-serial.h>
  41 #include <mach/regs-clock.h>
  42 #include <mach/regs-gpio.h>
  43
  44 #include <plat/s3c2412.h>
  45 #include <plat/clock.h>
  46 #include <plat/cpu.h>
  47
  48 /* We currently have to assume that the system is running
  49  * from the XTPll input, and that all ***REFCLKs are being
  50  * fed from it, as we cannot read the state of OM[4] from
  51  * software.
  52  *
  53  * It would be possible for each board initialisation to
  54  * set the correct muxing at initialisation
  55 */
  56
  57 static int s3c2412_clkcon_enable(struct clk *clk, int enable)
  58 {
  59         unsigned int clocks = clk->ctrlbit;
  60         unsigned long clkcon;
  61
  62         clkcon = __raw_readl(S3C2410_CLKCON);
  63
  64         if (enable)
  65                 clkcon |= clocks;
  66         else
  67                 clkcon &= ~clocks;
  68
  69         __raw_writel(clkcon, S3C2410_CLKCON);
  70
  71         return 0;
  72 }
  73
  74 static int s3c2412_upll_enable(struct clk *clk, int enable)
  75 {
  76         unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
  77         unsigned long orig = upllcon;
  78
  79         if (!enable)
  80                 upllcon |= S3C2412_PLLCON_OFF;
  81         else
  82                 upllcon &= ~S3C2412_PLLCON_OFF;
  83
  84         __raw_writel(upllcon, S3C2410_UPLLCON);
  85
  86         /* allow ~150uS for the PLL to settle and lock */
  87
  88         if (enable && (orig & S3C2412_PLLCON_OFF))
  89                 udelay(150);
  90
  91         return 0;
  92 }
  93
  94 /* clock selections */
  95
  96 static struct clk clk_erefclk = {
  97         .name           = "erefclk",
  98         .id             = -1,
  99 };
 100
 101 static struct clk clk_urefclk = {
 102         .name           = "urefclk",
 103         .id             = -1,
 104 };
 105
 106 static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent)
 107 {
 108         unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
 109
 110         if (parent == &clk_urefclk)
 111                 clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL;
 112         else if (parent == &clk_upll)
 113                 clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL;
 114         else
 115                 return -EINVAL;
 116
 117         clk->parent = parent;
 118
 119         __raw_writel(clksrc, S3C2412_CLKSRC);
 120         return 0;
 121 }
 122
 123 static struct clk clk_usysclk = {
 124         .name           = "usysclk",
 125         .id             = -1,
 126         .parent         = &clk_xtal,
 127         .set_parent     = s3c2412_setparent_usysclk,
 128 };
 129
 130 static struct clk clk_mrefclk = {
 131         .name           = "mrefclk",
 132         .parent         = &clk_xtal,
 133         .id             = -1,
 134 };
 135
 136 static struct clk clk_mdivclk = {
 137         .name           = "mdivclk",
 138         .parent         = &clk_xtal,
 139         .id             = -1,
 140 };
 141
 142 static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent)
 143 {
 144         unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
 145
 146         if (parent == &clk_usysclk)
 147                 clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK;
 148         else if (parent == &clk_h)
 149                 clksrc |= S3C2412_CLKSRC_USBCLK_HCLK;
 150         else
 151                 return -EINVAL;
 152
 153         clk->parent = parent;
 154
 155         __raw_writel(clksrc, S3C2412_CLKSRC);
 156         return 0;
 157 }
 158
 159 static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk,
 160                                               unsigned long rate)
 161 {
 162         unsigned long parent_rate = clk_get_rate(clk->parent);
 163         int div;
 164
 165         if (rate > parent_rate)
 166                 return parent_rate;
 167
 168         div = parent_rate / rate;
 169         if (div > 2)
 170                 div = 2;
 171
 172         return parent_rate / div;
 173 }
 174
 175 static unsigned long s3c2412_getrate_usbsrc(struct clk *clk)
 176 {
 177         unsigned long parent_rate = clk_get_rate(clk->parent);
 178         unsigned long div = __raw_readl(S3C2410_CLKDIVN);
 179
 180         return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1);
 181 }
 182
 183 static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate)
 184 {
 185         unsigned long parent_rate = clk_get_rate(clk->parent);
 186         unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
 187
 188         rate = s3c2412_roundrate_usbsrc(clk, rate);
 189
 190         if ((parent_rate / rate) == 2)
 191                 clkdivn |= S3C2412_CLKDIVN_USB48DIV;
 192         else
 193                 clkdivn &= ~S3C2412_CLKDIVN_USB48DIV;
 194
 195         __raw_writel(clkdivn, S3C2410_CLKDIVN);
 196         return 0;
 197 }
 198
 199 static struct clk clk_usbsrc = {
 200         .name           = "usbsrc",
 201         .id             = -1,
 202         .get_rate       = s3c2412_getrate_usbsrc,
 203         .set_rate       = s3c2412_setrate_usbsrc,
 204         .round_rate     = s3c2412_roundrate_usbsrc,
 205         .set_parent     = s3c2412_setparent_usbsrc,
 206 };
 207
 208 static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
 209 {
 210         unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
 211
 212         if (parent == &clk_mdivclk)
 213                 clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL;
 214         else if (parent == &clk_mpll)
 215                 clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL;
 216         else
 217                 return -EINVAL;
 218
 219         clk->parent = parent;
 220
 221         __raw_writel(clksrc, S3C2412_CLKSRC);
 222         return 0;
 223 }
 224
 225 static struct clk clk_msysclk = {
 226         .name           = "msysclk",
 227         .id             = -1,
 228         .set_parent     = s3c2412_setparent_msysclk,
 229 };
 230
 231 static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
 232 {
 233         unsigned long flags;
 234         unsigned long clkdiv;
 235         unsigned long dvs;
 236
 237         /* Note, we current equate fclk andf msysclk for S3C2412 */
 238
 239         if (parent == &clk_msysclk || parent == &clk_f)
 240                 dvs = 0;
 241         else if (parent == &clk_h)
 242                 dvs = S3C2412_CLKDIVN_DVSEN;
 243         else
 244                 return -EINVAL;
 245
 246         clk->parent = parent;
 247
 248         /* update this under irq lockdown, clkdivn is not protected
 249          * by the clock system. */
 250
 251         local_irq_save(flags);
 252
 253         clkdiv  = __raw_readl(S3C2410_CLKDIVN);
 254         clkdiv &= ~S3C2412_CLKDIVN_DVSEN;
 255         clkdiv |= dvs;
 256         __raw_writel(clkdiv, S3C2410_CLKDIVN);
 257
 258         local_irq_restore(flags);
 259
 260         return 0;
 261 }
 262
 263 static struct clk clk_armclk = {
 264         .name           = "armclk",
 265         .id             = -1,
 266         .parent         = &clk_msysclk,
 267         .set_parent     = s3c2412_setparent_armclk,
 268 };
 269
 270 /* these next clocks have an divider immediately after them,
 271  * so we can register them with their divider and leave out the
 272  * intermediate clock stage
 273 */
 274 static unsigned long s3c2412_roundrate_clksrc(struct clk *clk,
 275                                               unsigned long rate)
 276 {
 277         unsigned long parent_rate = clk_get_rate(clk->parent);
 278         int div;
 279
 280         if (rate > parent_rate)
 281                 return parent_rate;
 282
 283         /* note, we remove the +/- 1 calculations as they cancel out */
 284
 285         div = (rate / parent_rate);
 286
 287         if (div < 1)
 288                 div = 1;
 289         else if (div > 16)
 290                 div = 16;
 291
 292         return parent_rate / div;
 293 }
 294
 295 static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent)
 296 {
 297         unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
 298
 299         if (parent == &clk_erefclk)
 300                 clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL;
 301         else if (parent == &clk_mpll)
 302                 clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL;
 303         else
 304                 return -EINVAL;
 305
 306         clk->parent = parent;
 307
 308         __raw_writel(clksrc, S3C2412_CLKSRC);
 309         return 0;
 310 }
 311
 312 static unsigned long s3c2412_getrate_uart(struct clk *clk)
 313 {
 314         unsigned long parent_rate = clk_get_rate(clk->parent);
 315         unsigned long div = __raw_readl(S3C2410_CLKDIVN);
 316
 317         div &= S3C2412_CLKDIVN_UARTDIV_MASK;
 318         div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT;
 319
 320         return parent_rate / (div + 1);
 321 }
 322
 323 static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate)
 324 {
 325         unsigned long parent_rate = clk_get_rate(clk->parent);
 326         unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
 327
 328         rate = s3c2412_roundrate_clksrc(clk, rate);
 329
 330         clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK;
 331         clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT;
 332
 333         __raw_writel(clkdivn, S3C2410_CLKDIVN);
 334         return 0;
 335 }
 336
 337 static struct clk clk_uart = {
 338         .name           = "uartclk",
 339         .id             = -1,
 340         .get_rate       = s3c2412_getrate_uart,
 341         .set_rate       = s3c2412_setrate_uart,
 342         .set_parent     = s3c2412_setparent_uart,
 343         .round_rate     = s3c2412_roundrate_clksrc,
 344 };
 345
 346 static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
 347 {
 348         unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
 349
 350         if (parent == &clk_erefclk)
 351                 clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL;
 352         else if (parent == &clk_mpll)
 353                 clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL;
 354         else
 355                 return -EINVAL;
 356
 357         clk->parent = parent;
 358
 359         __raw_writel(clksrc, S3C2412_CLKSRC);
 360         return 0;
 361 }
 362
 363 static unsigned long s3c2412_getrate_i2s(struct clk *clk)
 364 {
 365         unsigned long parent_rate = clk_get_rate(clk->parent);
 366         unsigned long div = __raw_readl(S3C2410_CLKDIVN);
 367
 368         div &= S3C2412_CLKDIVN_I2SDIV_MASK;
 369         div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT;
 370
 371         return parent_rate / (div + 1);
 372 }
 373
 374 static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate)
 375 {
 376         unsigned long parent_rate = clk_get_rate(clk->parent);
 377         unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
 378
 379         rate = s3c2412_roundrate_clksrc(clk, rate);
 380
 381         clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK;
 382         clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT;
 383
 384         __raw_writel(clkdivn, S3C2410_CLKDIVN);
 385         return 0;
 386 }
 387
 388 static struct clk clk_i2s = {
 389         .name           = "i2sclk",
 390         .id             = -1,
 391         .get_rate       = s3c2412_getrate_i2s,
 392         .set_rate       = s3c2412_setrate_i2s,
 393         .set_parent     = s3c2412_setparent_i2s,
 394         .round_rate     = s3c2412_roundrate_clksrc,
 395 };
 396
 397 static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
 398 {
 399         unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
 400
 401         if (parent == &clk_usysclk)
 402                 clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK;
 403         else if (parent == &clk_h)
 404                 clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK;
 405         else
 406                 return -EINVAL;
 407
 408         clk->parent = parent;
 409
 410         __raw_writel(clksrc, S3C2412_CLKSRC);
 411         return 0;
 412 }
 413 static unsigned long s3c2412_getrate_cam(struct clk *clk)
 414 {
 415         unsigned long parent_rate = clk_get_rate(clk->parent);
 416         unsigned long div = __raw_readl(S3C2410_CLKDIVN);
 417
 418         div &= S3C2412_CLKDIVN_CAMDIV_MASK;
 419         div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT;
 420
 421         return parent_rate / (div + 1);
 422 }
 423
 424 static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate)
 425 {
 426         unsigned long parent_rate = clk_get_rate(clk->parent);
 427         unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
 428
 429         rate = s3c2412_roundrate_clksrc(clk, rate);
 430
 431         clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK;
 432         clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT;
 433
 434         __raw_writel(clkdivn, S3C2410_CLKDIVN);
 435         return 0;
 436 }
 437
 438 static struct clk clk_cam = {
 439         .name           = "camif-upll", /* same as 2440 name */
 440         .id             = -1,
 441         .get_rate       = s3c2412_getrate_cam,
 442         .set_rate       = s3c2412_setrate_cam,
 443         .set_parent     = s3c2412_setparent_cam,
 444         .round_rate     = s3c2412_roundrate_clksrc,
 445 };
 446
 447 /* standard clock definitions */
 448
 449 static struct clk init_clocks_disable[] = {
 450         {
 451                 .name           = "nand",
 452                 .id             = -1,
 453                 .parent         = &clk_h,
 454                 .enable         = s3c2412_clkcon_enable,
 455                 .ctrlbit        = S3C2412_CLKCON_NAND,
 456         }, {
 457                 .name           = "sdi",
 458                 .id             = -1,
 459                 .parent         = &clk_p,
 460                 .enable         = s3c2412_clkcon_enable,
 461                 .ctrlbit        = S3C2412_CLKCON_SDI,
 462         }, {
 463                 .name           = "adc",
 464                 .id             = -1,
 465                 .parent         = &clk_p,
 466                 .enable         = s3c2412_clkcon_enable,
 467                 .ctrlbit        = S3C2412_CLKCON_ADC,
 468         }, {
 469                 .name           = "i2c",
 470                 .id             = -1,
 471                 .parent         = &clk_p,
 472                 .enable         = s3c2412_clkcon_enable,
 473                 .ctrlbit        = S3C2412_CLKCON_IIC,
 474         }, {
 475                 .name           = "iis",
 476                 .id             = -1,
 477                 .parent         = &clk_p,
 478                 .enable         = s3c2412_clkcon_enable,
 479                 .ctrlbit        = S3C2412_CLKCON_IIS,
 480         }, {
 481                 .name           = "spi",
 482                 .id             = -1,
 483                 .parent         = &clk_p,
 484                 .enable         = s3c2412_clkcon_enable,
 485                 .ctrlbit        = S3C2412_CLKCON_SPI,
 486         }
 487 };
 488
 489 static struct clk init_clocks[] = {
 490         {
 491                 .name           = "dma",
 492                 .id             = 0,
 493                 .parent         = &clk_h,
 494                 .enable         = s3c2412_clkcon_enable,
 495                 .ctrlbit        = S3C2412_CLKCON_DMA0,
 496         }, {
 497                 .name           = "dma",
 498                 .id             = 1,
 499                 .parent         = &clk_h,
 500                 .enable         = s3c2412_clkcon_enable,
 501                 .ctrlbit        = S3C2412_CLKCON_DMA1,
 502         }, {
 503                 .name           = "dma",
 504                 .id             = 2,
 505                 .parent         = &clk_h,
 506                 .enable         = s3c2412_clkcon_enable,
 507                 .ctrlbit        = S3C2412_CLKCON_DMA2,
 508         }, {
 509                 .name           = "dma",
 510                 .id             = 3,
 511                 .parent         = &clk_h,
 512                 .enable         = s3c2412_clkcon_enable,
 513                 .ctrlbit        = S3C2412_CLKCON_DMA3,
 514         }, {
 515                 .name           = "lcd",
 516                 .id             = -1,
 517                 .parent         = &clk_h,
 518                 .enable         = s3c2412_clkcon_enable,
 519                 .ctrlbit        = S3C2412_CLKCON_LCDC,
 520         }, {
 521                 .name           = "gpio",
 522                 .id             = -1,
 523                 .parent         = &clk_p,
 524                 .enable         = s3c2412_clkcon_enable,
 525                 .ctrlbit        = S3C2412_CLKCON_GPIO,
 526         }, {
 527                 .name           = "usb-host",
 528                 .id             = -1,
 529                 .parent         = &clk_h,
 530                 .enable         = s3c2412_clkcon_enable,
 531                 .ctrlbit        = S3C2412_CLKCON_USBH,
 532         }, {
 533                 .name           = "usb-device",
 534                 .id             = -1,
 535                 .parent         = &clk_h,
 536                 .enable         = s3c2412_clkcon_enable,
 537                 .ctrlbit        = S3C2412_CLKCON_USBD,
 538         }, {
 539                 .name           = "timers",
 540                 .id             = -1,
 541                 .parent         = &clk_p,
 542                 .enable         = s3c2412_clkcon_enable,
 543                 .ctrlbit        = S3C2412_CLKCON_PWMT,
 544         }, {
 545                 .name           = "uart",
 546                 .id             = 0,
 547                 .parent         = &clk_p,
 548                 .enable         = s3c2412_clkcon_enable,
 549                 .ctrlbit        = S3C2412_CLKCON_UART0,
 550         }, {
 551                 .name           = "uart",
 552                 .id             = 1,
 553                 .parent         = &clk_p,
 554                 .enable         = s3c2412_clkcon_enable,
 555                 .ctrlbit        = S3C2412_CLKCON_UART1,
 556         }, {
 557                 .name           = "uart",
 558                 .id             = 2,
 559                 .parent         = &clk_p,
 560                 .enable         = s3c2412_clkcon_enable,
 561                 .ctrlbit        = S3C2412_CLKCON_UART2,
 562         }, {
 563                 .name           = "rtc",
 564                 .id             = -1,
 565                 .parent         = &clk_p,
 566                 .enable         = s3c2412_clkcon_enable,
 567                 .ctrlbit        = S3C2412_CLKCON_RTC,
 568         }, {
 569                 .name           = "watchdog",
 570                 .id             = -1,
 571                 .parent         = &clk_p,
 572                 .ctrlbit        = 0,
 573         }, {
 574                 .name           = "usb-bus-gadget",
 575                 .id             = -1,
 576                 .parent         = &clk_usb_bus,
 577                 .enable         = s3c2412_clkcon_enable,
 578                 .ctrlbit        = S3C2412_CLKCON_USB_DEV48,
 579         }, {
 580                 .name           = "usb-bus-host",
 581                 .id             = -1,
 582                 .parent         = &clk_usb_bus,
 583                 .enable         = s3c2412_clkcon_enable,
 584                 .ctrlbit        = S3C2412_CLKCON_USB_HOST48,
 585         }
 586 };
 587
 588 /* clocks to add where we need to check their parentage */
 589
 590 struct clk_init {
 591         struct clk      *clk;
 592         unsigned int     bit;
 593         struct clk      *src_0;
 594         struct clk      *src_1;
 595 };
 596
 597 static struct clk_init clks_src[] __initdata = {
 598         {
 599                 .clk    = &clk_usysclk,
 600                 .bit    = S3C2412_CLKSRC_USBCLK_HCLK,
 601                 .src_0  = &clk_urefclk,
 602                 .src_1  = &clk_upll,
 603         }, {
 604                 .clk    = &clk_i2s,
 605                 .bit    = S3C2412_CLKSRC_I2SCLK_MPLL,
 606                 .src_0  = &clk_erefclk,
 607                 .src_1  = &clk_mpll,
 608         }, {
 609                 .clk    = &clk_cam,
 610                 .bit    = S3C2412_CLKSRC_CAMCLK_HCLK,
 611                 .src_0  = &clk_usysclk,
 612                 .src_1  = &clk_h,
 613         }, {
 614                 .clk    = &clk_msysclk,
 615                 .bit    = S3C2412_CLKSRC_MSYSCLK_MPLL,
 616                 .src_0  = &clk_mdivclk,
 617                 .src_1  = &clk_mpll,
 618         }, {
 619                 .clk    = &clk_uart,
 620                 .bit    = S3C2412_CLKSRC_UARTCLK_MPLL,
 621                 .src_0  = &clk_erefclk,
 622                 .src_1  = &clk_mpll,
 623         }, {
 624                 .clk    = &clk_usbsrc,
 625                 .bit    = S3C2412_CLKSRC_USBCLK_HCLK,
 626                 .src_0  = &clk_usysclk,
 627                 .src_1  = &clk_h,
 628         /* here we assume  OM[4] select xtal */
 629         }, {
 630                 .clk    = &clk_erefclk,
 631                 .bit    = S3C2412_CLKSRC_EREFCLK_EXTCLK,
 632                 .src_0  = &clk_xtal,
 633                 .src_1  = &clk_ext,
 634         }, {
 635                 .clk    = &clk_urefclk,
 636                 .bit    = S3C2412_CLKSRC_UREFCLK_EXTCLK,
 637                 .src_0  = &clk_xtal,
 638                 .src_1  = &clk_ext,
 639         },
 640 };
 641
 642 /* s3c2412_clk_initparents
 643  *
 644  * Initialise the parents for the clocks that we get at start-time
 645 */
 646
 647 static void __init s3c2412_clk_initparents(void)
 648 {
 649         unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
 650         struct clk_init *cip = clks_src;
 651         struct clk *src;
 652         int ptr;
 653         int ret;
 654
 655         for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) {
 656                 ret = s3c24xx_register_clock(cip->clk);
 657                 if (ret < 0) {
 658                         printk(KERN_ERR "Failed to register clock %s (%d)\n",
 659                                cip->clk->name, ret);
 660                 }
 661
 662                 src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0;
 663
 664                 printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name);
 665                 clk_set_parent(cip->clk, src);
 666         }
 667 }
 668
 669 /* clocks to add straight away */
 670
 671 static struct clk *clks[] __initdata = {
 672         &clk_ext,
 673         &clk_usb_bus,
 674         &clk_mrefclk,
 675         &clk_armclk,
 676 };
 677
 678 int __init s3c2412_baseclk_add(void)
 679 {
 680         unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
 681         unsigned int dvs;
 682         struct clk *clkp;
 683         int ret;
 684         int ptr;
 685
 686         clk_upll.enable = s3c2412_upll_enable;
 687         clk_usb_bus.parent = &clk_usbsrc;
 688         clk_usb_bus.rate = 0x0;
 689
 690         clk_f.parent = &clk_msysclk;
 691
 692         s3c2412_clk_initparents();
 693
 694         for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
 695                 clkp = clks[ptr];
 696
 697                 ret = s3c24xx_register_clock(clkp);
 698                 if (ret < 0) {
 699                         printk(KERN_ERR "Failed to register clock %s (%d)\n",
 700                                clkp->name, ret);
 701                 }
 702         }
 703
 704         /* set the dvs state according to what we got at boot time */
 705
 706         dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN;
 707
 708         if (dvs)
 709                 clk_armclk.parent = &clk_h;
 710
 711         printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off");
 712
 713         /* ensure usb bus clock is within correct rate of 48MHz */
 714
 715         if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) {
 716                 printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n");
 717
 718                 /* for the moment, let's use the UPLL, and see if we can
 719                  * get 48MHz */
 720
 721                 clk_set_parent(&clk_usysclk, &clk_upll);
 722                 clk_set_parent(&clk_usbsrc, &clk_usysclk);
 723                 clk_set_rate(&clk_usbsrc, 48*1000*1000);
 724         }
 725
 726         printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
 727                (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on",
 728                print_mhz(clk_get_rate(&clk_upll)),
 729                print_mhz(clk_get_rate(&clk_usb_bus)));
 730
 731         /* register clocks from clock array */
 732
 733         clkp = init_clocks;
 734         for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
 735                 /* ensure that we note the clock state */
 736
 737                 clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
 738
 739                 ret = s3c24xx_register_clock(clkp);
 740                 if (ret < 0) {
 741                         printk(KERN_ERR "Failed to register clock %s (%d)\n",
 742                                clkp->name, ret);
 743                 }
 744         }
 745
 746         /* We must be careful disabling the clocks we are not intending to
 747          * be using at boot time, as subsystems such as the LCD which do
 748          * their own DMA requests to the bus can cause the system to lockup
 749          * if they where in the middle of requesting bus access.
 750          *
 751          * Disabling the LCD clock if the LCD is active is very dangerous,
 752          * and therefore the bootloader should be careful to not enable
 753          * the LCD clock if it is not needed.
 754         */
 755
 756         /* install (and disable) the clocks we do not need immediately */
 757
 758         clkp = init_clocks_disable;
 759         for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
 760
 761                 ret = s3c24xx_register_clock(clkp);
 762                 if (ret < 0) {
 763                         printk(KERN_ERR "Failed to register clock %s (%d)\n",
 764                                clkp->name, ret);
 765                 }
 766
 767                 s3c2412_clkcon_enable(clkp, 0);
 768         }
 769
 770         return 0;
 771 }