arch/arm/mach-realview/core.c

   1 /*
   2  *  linux/arch/arm/mach-realview/core.c
   3  *
   4  *  Copyright (C) 1999 - 2003 ARM Limited
   5  *  Copyright (C) 2000 Deep Blue Solutions Ltd
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  20  */
  21 #include <linux/init.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/dma-mapping.h>
  24 #include <linux/sysdev.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/amba/bus.h>
  27 #include <linux/amba/clcd.h>
  28 #include <linux/clocksource.h>
  29 #include <linux/clockchips.h>
  30 #include <linux/io.h>
  31 #include <linux/smsc911x.h>
  32 #include <linux/ata_platform.h>
  33 #include <linux/amba/mmci.h>
  34
  35 #include <asm/clkdev.h>
  36 #include <asm/system.h>
  37 #include <mach/hardware.h>
  38 #include <asm/irq.h>
  39 #include <asm/leds.h>
  40 #include <asm/mach-types.h>
  41 #include <asm/hardware/arm_timer.h>
  42 #include <asm/hardware/icst307.h>
  43
  44 #include <asm/mach/arch.h>
  45 #include <asm/mach/flash.h>
  46 #include <asm/mach/irq.h>
  47 #include <asm/mach/map.h>
  48
  49 #include <asm/hardware/gic.h>
  50
  51 #include <mach/platform.h>
  52 #include <mach/irqs.h>
  53
  54 #include "core.h"
  55 #include "clock.h"
  56
  57 #define REALVIEW_REFCOUNTER     (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
  58
  59 /* used by entry-macro.S and platsmp.c */
  60 void __iomem *gic_cpu_base_addr;
  61
  62 #ifdef CONFIG_ZONE_DMA
  63 /*
  64  * Adjust the zones if there are restrictions for DMA access.
  65  */
  66 void __init realview_adjust_zones(int node, unsigned long *size,
  67                                   unsigned long *hole)
  68 {
  69         unsigned long dma_size = SZ_256M >> PAGE_SHIFT;
  70
  71         if (!machine_is_realview_pbx() || node || (size[0] <= dma_size))
  72                 return;
  73
  74         size[ZONE_NORMAL] = size[0] - dma_size;
  75         size[ZONE_DMA] = dma_size;
  76         hole[ZONE_NORMAL] = hole[0];
  77         hole[ZONE_DMA] = 0;
  78 }
  79 #endif
  80
  81 /*
  82  * This is the RealView sched_clock implementation.  This has
  83  * a resolution of 41.7ns, and a maximum value of about 179s.
  84  */
  85 unsigned long long sched_clock(void)
  86 {
  87         unsigned long long v;
  88
  89         v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125;
  90         do_div(v, 3);
  91
  92         return v;
  93 }
  94
  95
  96 #define REALVIEW_FLASHCTRL    (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
  97
  98 static int realview_flash_init(void)
  99 {
 100         u32 val;
 101
 102         val = __raw_readl(REALVIEW_FLASHCTRL);
 103         val &= ~REALVIEW_FLASHPROG_FLVPPEN;
 104         __raw_writel(val, REALVIEW_FLASHCTRL);
 105
 106         return 0;
 107 }
 108
 109 static void realview_flash_exit(void)
 110 {
 111         u32 val;
 112
 113         val = __raw_readl(REALVIEW_FLASHCTRL);
 114         val &= ~REALVIEW_FLASHPROG_FLVPPEN;
 115         __raw_writel(val, REALVIEW_FLASHCTRL);
 116 }
 117
 118 static void realview_flash_set_vpp(int on)
 119 {
 120         u32 val;
 121
 122         val = __raw_readl(REALVIEW_FLASHCTRL);
 123         if (on)
 124                 val |= REALVIEW_FLASHPROG_FLVPPEN;
 125         else
 126                 val &= ~REALVIEW_FLASHPROG_FLVPPEN;
 127         __raw_writel(val, REALVIEW_FLASHCTRL);
 128 }
 129
 130 static struct flash_platform_data realview_flash_data = {
 131         .map_name               = "cfi_probe",
 132         .width                  = 4,
 133         .init                   = realview_flash_init,
 134         .exit                   = realview_flash_exit,
 135         .set_vpp                = realview_flash_set_vpp,
 136 };
 137
 138 struct platform_device realview_flash_device = {
 139         .name                   = "armflash",
 140         .id                     = 0,
 141         .dev                    = {
 142                 .platform_data  = &realview_flash_data,
 143         },
 144 };
 145
 146 int realview_flash_register(struct resource *res, u32 num)
 147 {
 148         realview_flash_device.resource = res;
 149         realview_flash_device.num_resources = num;
 150         return platform_device_register(&realview_flash_device);
 151 }
 152
 153 static struct smsc911x_platform_config smsc911x_config = {
 154         .flags          = SMSC911X_USE_32BIT,
 155         .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
 156         .irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
 157         .phy_interface  = PHY_INTERFACE_MODE_MII,
 158 };
 159
 160 static struct platform_device realview_eth_device = {
 161         .name           = "smsc911x",
 162         .id             = 0,
 163         .num_resources  = 2,
 164 };
 165
 166 int realview_eth_register(const char *name, struct resource *res)
 167 {
 168         if (name)
 169                 realview_eth_device.name = name;
 170         realview_eth_device.resource = res;
 171         if (strcmp(realview_eth_device.name, "smsc911x") == 0)
 172                 realview_eth_device.dev.platform_data = &smsc911x_config;
 173
 174         return platform_device_register(&realview_eth_device);
 175 }
 176
 177 struct platform_device realview_usb_device = {
 178         .name                   = "isp1760",
 179         .num_resources          = 2,
 180 };
 181
 182 int realview_usb_register(struct resource *res)
 183 {
 184         realview_usb_device.resource = res;
 185         return platform_device_register(&realview_usb_device);
 186 }
 187
 188 static struct pata_platform_info pata_platform_data = {
 189         .ioport_shift           = 1,
 190 };
 191
 192 static struct resource pata_resources[] = {
 193         [0] = {
 194                 .start          = REALVIEW_CF_BASE,
 195                 .end            = REALVIEW_CF_BASE + 0xff,
 196                 .flags          = IORESOURCE_MEM,
 197         },
 198         [1] = {
 199                 .start          = REALVIEW_CF_BASE + 0x100,
 200                 .end            = REALVIEW_CF_BASE + SZ_4K - 1,
 201                 .flags          = IORESOURCE_MEM,
 202         },
 203 };
 204
 205 struct platform_device realview_cf_device = {
 206         .name                   = "pata_platform",
 207         .id                     = -1,
 208         .num_resources          = ARRAY_SIZE(pata_resources),
 209         .resource               = pata_resources,
 210         .dev                    = {
 211                 .platform_data  = &pata_platform_data,
 212         },
 213 };
 214
 215 static struct resource realview_i2c_resource = {
 216         .start          = REALVIEW_I2C_BASE,
 217         .end            = REALVIEW_I2C_BASE + SZ_4K - 1,
 218         .flags          = IORESOURCE_MEM,
 219 };
 220
 221 struct platform_device realview_i2c_device = {
 222         .name           = "versatile-i2c",
 223         .id             = 0,
 224         .num_resources  = 1,
 225         .resource       = &realview_i2c_resource,
 226 };
 227
 228 static struct i2c_board_info realview_i2c_board_info[] = {
 229         {
 230                 I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
 231         },
 232 };
 233
 234 static int __init realview_i2c_init(void)
 235 {
 236         return i2c_register_board_info(0, realview_i2c_board_info,
 237                                        ARRAY_SIZE(realview_i2c_board_info));
 238 }
 239 arch_initcall(realview_i2c_init);
 240
 241 #define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
 242
 243 /*
 244  * This is only used if GPIOLIB support is disabled
 245  */
 246 static unsigned int realview_mmc_status(struct device *dev)
 247 {
 248         struct amba_device *adev = container_of(dev, struct amba_device, dev);
 249         u32 mask;
 250
 251         if (adev->res.start == REALVIEW_MMCI0_BASE)
 252                 mask = 1;
 253         else
 254                 mask = 2;
 255
 256         return readl(REALVIEW_SYSMCI) & mask;
 257 }
 258
 259 struct mmci_platform_data realview_mmc0_plat_data = {
 260         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 261         .status         = realview_mmc_status,
 262         .gpio_wp        = 17,
 263         .gpio_cd        = 16,
 264 };
 265
 266 struct mmci_platform_data realview_mmc1_plat_data = {
 267         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 268         .status         = realview_mmc_status,
 269         .gpio_wp        = 19,
 270         .gpio_cd        = 18,
 271 };
 272
 273 /*
 274  * Clock handling
 275  */
 276 static const struct icst307_params realview_oscvco_params = {
 277         .ref            = 24000,
 278         .vco_max        = 200000,
 279         .vd_min         = 4 + 8,
 280         .vd_max         = 511 + 8,
 281         .rd_min         = 1 + 2,
 282         .rd_max         = 127 + 2,
 283 };
 284
 285 static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
 286 {
 287         void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
 288         void __iomem *sys_osc;
 289         u32 val;
 290
 291         if (machine_is_realview_pb1176())
 292                 sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET;
 293         else
 294                 sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;
 295
 296         val = readl(sys_osc) & ~0x7ffff;
 297         val |= vco.v | (vco.r << 9) | (vco.s << 16);
 298
 299         writel(0xa05f, sys_lock);
 300         writel(val, sys_osc);
 301         writel(0, sys_lock);
 302 }
 303
 304 static struct clk oscvco_clk = {
 305         .params = &realview_oscvco_params,
 306         .setvco = realview_oscvco_set,
 307 };
 308
 309 /*
 310  * These are fixed clocks.
 311  */
 312 static struct clk ref24_clk = {
 313         .rate   = 24000000,
 314 };
 315
 316 static struct clk_lookup lookups[] = {
 317         {       /* UART0 */
 318                 .dev_id         = "dev:uart0",
 319                 .clk            = &ref24_clk,
 320         }, {    /* UART1 */
 321                 .dev_id         = "dev:uart1",
 322                 .clk            = &ref24_clk,
 323         }, {    /* UART2 */
 324                 .dev_id         = "dev:uart2",
 325                 .clk            = &ref24_clk,
 326         }, {    /* UART3 */
 327                 .dev_id         = "fpga:uart3",
 328                 .clk            = &ref24_clk,
 329         }, {    /* KMI0 */
 330                 .dev_id         = "fpga:kmi0",
 331                 .clk            = &ref24_clk,
 332         }, {    /* KMI1 */
 333                 .dev_id         = "fpga:kmi1",
 334                 .clk            = &ref24_clk,
 335         }, {    /* MMC0 */
 336                 .dev_id         = "fpga:mmc0",
 337                 .clk            = &ref24_clk,
 338         }, {    /* EB:CLCD */
 339                 .dev_id         = "dev:clcd",
 340                 .clk            = &oscvco_clk,
 341         }, {    /* PB:CLCD */
 342                 .dev_id         = "issp:clcd",
 343                 .clk            = &oscvco_clk,
 344         }
 345 };
 346
 347 static int __init clk_init(void)
 348 {
 349         clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 350         return 0;
 351 }
 352 arch_initcall(clk_init);
 353
 354 /*
 355  * CLCD support.
 356  */
 357 #define SYS_CLCD_NLCDIOON       (1 << 2)
 358 #define SYS_CLCD_VDDPOSSWITCH   (1 << 3)
 359 #define SYS_CLCD_PWR3V5SWITCH   (1 << 4)
 360 #define SYS_CLCD_ID_MASK        (0x1f << 8)
 361 #define SYS_CLCD_ID_SANYO_3_8   (0x00 << 8)
 362 #define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8)
 363 #define SYS_CLCD_ID_EPSON_2_2   (0x02 << 8)
 364 #define SYS_CLCD_ID_SANYO_2_5   (0x07 << 8)
 365 #define SYS_CLCD_ID_VGA         (0x1f << 8)
 366
 367 static struct clcd_panel vga = {
 368         .mode           = {
 369                 .name           = "VGA",
 370                 .refresh        = 60,
 371                 .xres           = 640,
 372                 .yres           = 480,
 373                 .pixclock       = 39721,
 374                 .left_margin    = 40,
 375                 .right_margin   = 24,
 376                 .upper_margin   = 32,
 377                 .lower_margin   = 11,
 378                 .hsync_len      = 96,
 379                 .vsync_len      = 2,
 380                 .sync           = 0,
 381                 .vmode          = FB_VMODE_NONINTERLACED,
 382         },
 383         .width          = -1,
 384         .height         = -1,
 385         .tim2           = TIM2_BCD | TIM2_IPC,
 386         .cntl           = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
 387         .bpp            = 16,
 388 };
 389
 390 static struct clcd_panel xvga = {
 391         .mode           = {
 392                 .name           = "XVGA",
 393                 .refresh        = 60,
 394                 .xres           = 1024,
 395                 .yres           = 768,
 396                 .pixclock       = 15748,
 397                 .left_margin    = 152,
 398                 .right_margin   = 48,
 399                 .upper_margin   = 23,
 400                 .lower_margin   = 3,
 401                 .hsync_len      = 104,
 402                 .vsync_len      = 4,
 403                 .sync           = 0,
 404                 .vmode          = FB_VMODE_NONINTERLACED,
 405         },
 406         .width          = -1,
 407         .height         = -1,
 408         .tim2           = TIM2_BCD | TIM2_IPC,
 409         .cntl           = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
 410         .bpp            = 16,
 411 };
 412
 413 static struct clcd_panel sanyo_3_8_in = {
 414         .mode           = {
 415                 .name           = "Sanyo QVGA",
 416                 .refresh        = 116,
 417                 .xres           = 320,
 418                 .yres           = 240,
 419                 .pixclock       = 100000,
 420                 .left_margin    = 6,
 421                 .right_margin   = 6,
 422                 .upper_margin   = 5,
 423                 .lower_margin   = 5,
 424                 .hsync_len      = 6,
 425                 .vsync_len      = 6,
 426                 .sync           = 0,
 427                 .vmode          = FB_VMODE_NONINTERLACED,
 428         },
 429         .width          = -1,
 430         .height         = -1,
 431         .tim2           = TIM2_BCD,
 432         .cntl           = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
 433         .bpp            = 16,
 434 };
 435
 436 static struct clcd_panel sanyo_2_5_in = {
 437         .mode           = {
 438                 .name           = "Sanyo QVGA Portrait",
 439                 .refresh        = 116,
 440                 .xres           = 240,
 441                 .yres           = 320,
 442                 .pixclock       = 100000,
 443                 .left_margin    = 20,
 444                 .right_margin   = 10,
 445                 .upper_margin   = 2,
 446                 .lower_margin   = 2,
 447                 .hsync_len      = 10,
 448                 .vsync_len      = 2,
 449                 .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 450                 .vmode          = FB_VMODE_NONINTERLACED,
 451         },
 452         .width          = -1,
 453         .height         = -1,
 454         .tim2           = TIM2_IVS | TIM2_IHS | TIM2_IPC,
 455         .cntl           = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
 456         .bpp            = 16,
 457 };
 458
 459 static struct clcd_panel epson_2_2_in = {
 460         .mode           = {
 461                 .name           = "Epson QCIF",
 462                 .refresh        = 390,
 463                 .xres           = 176,
 464                 .yres           = 220,
 465                 .pixclock       = 62500,
 466                 .left_margin    = 3,
 467                 .right_margin   = 2,
 468                 .upper_margin   = 1,
 469                 .lower_margin   = 0,
 470                 .hsync_len      = 3,
 471                 .vsync_len      = 2,
 472                 .sync           = 0,
 473                 .vmode          = FB_VMODE_NONINTERLACED,
 474         },
 475         .width          = -1,
 476         .height         = -1,
 477         .tim2           = TIM2_BCD | TIM2_IPC,
 478         .cntl           = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
 479         .bpp            = 16,
 480 };
 481
 482 /*
 483  * Detect which LCD panel is connected, and return the appropriate
 484  * clcd_panel structure.  Note: we do not have any information on
 485  * the required timings for the 8.4in panel, so we presently assume
 486  * VGA timings.
 487  */
 488 static struct clcd_panel *realview_clcd_panel(void)
 489 {
 490         void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
 491         struct clcd_panel *vga_panel;
 492         struct clcd_panel *panel;
 493         u32 val;
 494
 495         if (machine_is_realview_eb())
 496                 vga_panel = &vga;
 497         else
 498                 vga_panel = &xvga;
 499
 500         val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
 501         if (val == SYS_CLCD_ID_SANYO_3_8)
 502                 panel = &sanyo_3_8_in;
 503         else if (val == SYS_CLCD_ID_SANYO_2_5)
 504                 panel = &sanyo_2_5_in;
 505         else if (val == SYS_CLCD_ID_EPSON_2_2)
 506                 panel = &epson_2_2_in;
 507         else if (val == SYS_CLCD_ID_VGA)
 508                 panel = vga_panel;
 509         else {
 510                 printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
 511                         val);
 512                 panel = vga_panel;
 513         }
 514
 515         return panel;
 516 }
 517
 518 /*
 519  * Disable all display connectors on the interface module.
 520  */
 521 static void realview_clcd_disable(struct clcd_fb *fb)
 522 {
 523         void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
 524         u32 val;
 525
 526         val = readl(sys_clcd);
 527         val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 528         writel(val, sys_clcd);
 529 }
 530
 531 /*
 532  * Enable the relevant connector on the interface module.
 533  */
 534 static void realview_clcd_enable(struct clcd_fb *fb)
 535 {
 536         void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
 537         u32 val;
 538
 539         /*
 540          * Enable the PSUs
 541          */
 542         val = readl(sys_clcd);
 543         val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
 544         writel(val, sys_clcd);
 545 }
 546
 547 static int realview_clcd_setup(struct clcd_fb *fb)
 548 {
 549         unsigned long framesize;
 550         dma_addr_t dma;
 551
 552         if (machine_is_realview_eb())
 553                 /* VGA, 16bpp */
 554                 framesize = 640 * 480 * 2;
 555         else
 556                 /* XVGA, 16bpp */
 557                 framesize = 1024 * 768 * 2;
 558
 559         fb->panel               = realview_clcd_panel();
 560
 561         fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
 562                                                     &dma, GFP_KERNEL | GFP_DMA);
 563         if (!fb->fb.screen_base) {
 564                 printk(KERN_ERR "CLCD: unable to map framebuffer\n");
 565                 return -ENOMEM;
 566         }
 567
 568         fb->fb.fix.smem_start   = dma;
 569         fb->fb.fix.smem_len     = framesize;
 570
 571         return 0;
 572 }
 573
 574 static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
 575 {
 576         return dma_mmap_writecombine(&fb->dev->dev, vma,
 577                                      fb->fb.screen_base,
 578                                      fb->fb.fix.smem_start,
 579                                      fb->fb.fix.smem_len);
 580 }
 581
 582 static void realview_clcd_remove(struct clcd_fb *fb)
 583 {
 584         dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
 585                               fb->fb.screen_base, fb->fb.fix.smem_start);
 586 }
 587
 588 struct clcd_board clcd_plat_data = {
 589         .name           = "RealView",
 590         .check          = clcdfb_check,
 591         .decode         = clcdfb_decode,
 592         .disable        = realview_clcd_disable,
 593         .enable         = realview_clcd_enable,
 594         .setup          = realview_clcd_setup,
 595         .mmap           = realview_clcd_mmap,
 596         .remove         = realview_clcd_remove,
 597 };
 598
 599 #ifdef CONFIG_LEDS
 600 #define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)
 601
 602 void realview_leds_event(led_event_t ledevt)
 603 {
 604         unsigned long flags;
 605         u32 val;
 606         u32 led = 1 << smp_processor_id();
 607
 608         local_irq_save(flags);
 609         val = readl(VA_LEDS_BASE);
 610
 611         switch (ledevt) {
 612         case led_idle_start:
 613                 val = val & ~led;
 614                 break;
 615
 616         case led_idle_end:
 617                 val = val | led;
 618                 break;
 619
 620         case led_timer:
 621                 val = val ^ REALVIEW_SYS_LED7;
 622                 break;
 623
 624         case led_halted:
 625                 val = 0;
 626                 break;
 627
 628         default:
 629                 break;
 630         }
 631
 632         writel(val, VA_LEDS_BASE);
 633         local_irq_restore(flags);
 634 }
 635 #endif  /* CONFIG_LEDS */
 636
 637 /*
 638  * Where is the timer (VA)?
 639  */
 640 void __iomem *timer0_va_base;
 641 void __iomem *timer1_va_base;
 642 void __iomem *timer2_va_base;
 643 void __iomem *timer3_va_base;
 644
 645 /*
 646  * How long is the timer interval?
 647  */
 648 #define TIMER_INTERVAL  (TICKS_PER_uSEC * mSEC_10)
 649 #if TIMER_INTERVAL >= 0x100000
 650 #define TIMER_RELOAD    (TIMER_INTERVAL >> 8)
 651 #define TIMER_DIVISOR   (TIMER_CTRL_DIV256)
 652 #define TICKS2USECS(x)  (256 * (x) / TICKS_PER_uSEC)
 653 #elif TIMER_INTERVAL >= 0x10000
 654 #define TIMER_RELOAD    (TIMER_INTERVAL >> 4)           /* Divide by 16 */
 655 #define TIMER_DIVISOR   (TIMER_CTRL_DIV16)
 656 #define TICKS2USECS(x)  (16 * (x) / TICKS_PER_uSEC)
 657 #else
 658 #define TIMER_RELOAD    (TIMER_INTERVAL)
 659 #define TIMER_DIVISOR   (TIMER_CTRL_DIV1)
 660 #define TICKS2USECS(x)  ((x) / TICKS_PER_uSEC)
 661 #endif
 662
 663 static void timer_set_mode(enum clock_event_mode mode,
 664                            struct clock_event_device *clk)
 665 {
 666         unsigned long ctrl;
 667
 668         switch(mode) {
 669         case CLOCK_EVT_MODE_PERIODIC:
 670                 writel(TIMER_RELOAD, timer0_va_base + TIMER_LOAD);
 671
 672                 ctrl = TIMER_CTRL_PERIODIC;
 673                 ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE;
 674                 break;
 675         case CLOCK_EVT_MODE_ONESHOT:
 676                 /* period set, and timer enabled in 'next_event' hook */
 677                 ctrl = TIMER_CTRL_ONESHOT;
 678                 ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE;
 679                 break;
 680         case CLOCK_EVT_MODE_UNUSED:
 681         case CLOCK_EVT_MODE_SHUTDOWN:
 682         default:
 683                 ctrl = 0;
 684         }
 685
 686         writel(ctrl, timer0_va_base + TIMER_CTRL);
 687 }
 688
 689 static int timer_set_next_event(unsigned long evt,
 690                                 struct clock_event_device *unused)
 691 {
 692         unsigned long ctrl = readl(timer0_va_base + TIMER_CTRL);
 693
 694         writel(evt, timer0_va_base + TIMER_LOAD);
 695         writel(ctrl | TIMER_CTRL_ENABLE, timer0_va_base + TIMER_CTRL);
 696
 697         return 0;
 698 }
 699
 700 static struct clock_event_device timer0_clockevent =     {
 701         .name           = "timer0",
 702         .shift          = 32,
 703         .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 704         .set_mode       = timer_set_mode,
 705         .set_next_event = timer_set_next_event,
 706         .rating         = 300,
 707         .cpumask        = cpu_all_mask,
 708 };
 709
 710 static void __init realview_clockevents_init(unsigned int timer_irq)
 711 {
 712         timer0_clockevent.irq = timer_irq;
 713         timer0_clockevent.mult =
 714                 div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
 715         timer0_clockevent.max_delta_ns =
 716                 clockevent_delta2ns(0xffffffff, &timer0_clockevent);
 717         timer0_clockevent.min_delta_ns =
 718                 clockevent_delta2ns(0xf, &timer0_clockevent);
 719
 720         clockevents_register_device(&timer0_clockevent);
 721 }
 722
 723 /*
 724  * IRQ handler for the timer
 725  */
 726 static irqreturn_t realview_timer_interrupt(int irq, void *dev_id)
 727 {
 728         struct clock_event_device *evt = &timer0_clockevent;
 729
 730         /* clear the interrupt */
 731         writel(1, timer0_va_base + TIMER_INTCLR);
 732
 733         evt->event_handler(evt);
 734
 735         return IRQ_HANDLED;
 736 }
 737
 738 static struct irqaction realview_timer_irq = {
 739         .name           = "RealView Timer Tick",
 740         .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
 741         .handler        = realview_timer_interrupt,
 742 };
 743
 744 static cycle_t realview_get_cycles(struct clocksource *cs)
 745 {
 746         return ~readl(timer3_va_base + TIMER_VALUE);
 747 }
 748
 749 static struct clocksource clocksource_realview = {
 750         .name   = "timer3",
 751         .rating = 200,
 752         .read   = realview_get_cycles,
 753         .mask   = CLOCKSOURCE_MASK(32),
 754         .shift  = 20,
 755         .flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 756 };
 757
 758 static void __init realview_clocksource_init(void)
 759 {
 760         /* setup timer 0 as free-running clocksource */
 761         writel(0, timer3_va_base + TIMER_CTRL);
 762         writel(0xffffffff, timer3_va_base + TIMER_LOAD);
 763         writel(0xffffffff, timer3_va_base + TIMER_VALUE);
 764         writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
 765                 timer3_va_base + TIMER_CTRL);
 766
 767         clocksource_realview.mult =
 768                 clocksource_khz2mult(1000, clocksource_realview.shift);
 769         clocksource_register(&clocksource_realview);
 770 }
 771
 772 /*
 773  * Set up the clock source and clock events devices
 774  */
 775 void __init realview_timer_init(unsigned int timer_irq)
 776 {
 777         u32 val;
 778
 779         /*
 780          * set clock frequency:
 781          *      REALVIEW_REFCLK is 32KHz
 782          *      REALVIEW_TIMCLK is 1MHz
 783          */
 784         val = readl(__io_address(REALVIEW_SCTL_BASE));
 785         writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) |
 786                (REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) |
 787                (REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) |
 788                (REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val,
 789                __io_address(REALVIEW_SCTL_BASE));
 790
 791         /*
 792          * Initialise to a known state (all timers off)
 793          */
 794         writel(0, timer0_va_base + TIMER_CTRL);
 795         writel(0, timer1_va_base + TIMER_CTRL);
 796         writel(0, timer2_va_base + TIMER_CTRL);
 797         writel(0, timer3_va_base + TIMER_CTRL);
 798
 799         /*
 800          * Make irqs happen for the system timer
 801          */
 802         setup_irq(timer_irq, &realview_timer_irq);
 803
 804         realview_clocksource_init();
 805         realview_clockevents_init(timer_irq);
 806 }
 807
 808 /*
 809  * Setup the memory banks.
 810  */
 811 void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from,
 812                     struct meminfo *meminfo)
 813 {
 814         /*
 815          * Most RealView platforms have 512MB contiguous RAM at 0x70000000.
 816          * Half of this is mirrored at 0.
 817          */
 818 #ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
 819         meminfo->bank[0].start = 0x70000000;
 820         meminfo->bank[0].size = SZ_512M;
 821         meminfo->nr_banks = 1;
 822 #else
 823         meminfo->bank[0].start = 0;
 824         meminfo->bank[0].size = SZ_256M;
 825         meminfo->nr_banks = 1;
 826 #endif
 827 }